--

-- This SMIv2 module has been generated by smidump 0.4.5. Do not edit.

--

MAU-MIB DEFINITIONS ::= BEGIN

IMPORTS

    IANAifJackType, IANAifMauAutoNegCapBits, IANAifMauMediaAvailable, 

    IANAifMauTypeListBits

        FROM IANA-MAU-MIB

    InterfaceIndex

        FROM IF-MIB

    MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP

        FROM SNMPv2-CONF

    Counter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, 

    OBJECT-TYPE, mib-2

        FROM SNMPv2-SMI

    AutonomousType, TEXTUAL-CONVENTION, TruthValue

        FROM SNMPv2-TC;

mauMod MODULE-IDENTITY

    LAST-UPDATED "200704210000Z"

    ORGANIZATION 

        "IETF Ethernet Interfaces and Hub MIB Working Group"

    CONTACT-INFO 

        "WG charter:

         http://www.ietf.org/html.charters/hubmib-charter.html

         Mailing Lists:

         General Discussion: hubmib@ietf.org

         To Subscribe: hubmib-request@ietf.org

         In Body: subscribe your_email_address

         Chair: Bert Wijnen

         Postal: Alcatel-Lucent

               Schagen 33

               3461 GL Linschoten

               Netherlands

         Phone: +31-348-407-775

         EMail: bwijnen@alcatel-lucent.com

         Editor: Edward Beili

         Postal: Actelis Networks Inc.

               25 Bazel St., P.O.B. 10173

               Petach-Tikva 10173

               Israel

          Tel: +972-3-924-3491

         EMail: edward.beili@actelis.com"

    DESCRIPTION 

        "Management information for 802.3 MAUs.

         The following reference is used throughout this MIB module:

         [IEEE802.3] refers to:

            IEEE Std 802.3, 2005 Edition: 'IEEE Standard for Information

            technology - Telecommunications and information exchange

            between systems - Local and metropolitan area networks -

            Specific requirements - Part 3: Carrier sense multiple

            access with collision detection (CSMA/CD) access method and

            physical layer specifications'.

            Of particular interest is Clause 30, 'Management'.

         Copyright (C) The IETF Trust (2007).

         This version of this MIB module is part of RFC 4836;

         see the RFC itself for full legal notices."

    REVISION    "200704210000Z"

    DESCRIPTION 

        "Updated to reference IANA maintaned textual

         conventions for MAU types, Media Availability state,

         Auto Negotiation capabilities, and jack types,

         instead of using internally defined values.

         This version is published as RFC 4836."

    REVISION    "200309190000Z"

    DESCRIPTION 

        "Updated to include support for 10 Gb/s MAUs.

         This resulted in the following revisions:

         - Added OBJECT-IDENTITY definitions for

           10 gigabit MAU types

         - Added fiberLC jack type to JackType TC

         - Extended ifMauTypeListBits with bits for

           the 10 gigabit MAU types

         - Added enumerations to ifMauMediaAvailable,

           and updated its DESCRIPTION to reflect

           behaviour at 10 Gb/s

         - Added 64-bit version of ifMauFalseCarriers

           and added mauIfGrpHCStats object group to

           contain the new object

         - Deprecated mauModIfCompl2 and replaced it

           with mauModIfCompl3, which includes the new

           object group

          This version published as RFC 3636."

    REVISION    "199908240400Z"

    DESCRIPTION 

        "This version published as RFC 2668.  Updated

         to include support for 1000 Mb/sec

         MAUs and flow control negotiation."

    REVISION    "199710310000Z"

    DESCRIPTION 

        "Version published as RFC 2239."

    REVISION    "199309300000Z"

    DESCRIPTION 

        "Initial version, published as RFC 1515."

    ::= { snmpDot3MauMgt 6 }

JackType ::= TEXTUAL-CONVENTION

    STATUS      deprecated

    DESCRIPTION 

        "********* THIS TC IS DEPRECATED **********

         This TC has been deprecated in favour of

         IANAifJackType.

         Common enumeration values for repeater

         and interface MAU jack types."

    SYNTAX      INTEGER { other(1), rj45(2), rj45S(3), db9(4), bnc(5), 

                    fAUI(6), mAUI(7), fiberSC(8), fiberMIC(9), 

                    fiberST(10), telco(11), mtrj(12), hssdc(13), 

                    fiberLC(14) }

snmpDot3MauMgt OBJECT IDENTIFIER

    ::= { mib-2 26 }

snmpDot3MauTraps OBJECT IDENTIFIER

    ::= { snmpDot3MauMgt 0 }

dot3RpMauBasicGroup OBJECT IDENTIFIER

    ::= { snmpDot3MauMgt 1 }

rpMauTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF RpMauEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION 

        "Table of descriptive and status information

         about the MAU(s) attached to the ports of a

         repeater."

    ::= { dot3RpMauBasicGroup 1 }

rpMauEntry OBJECT-TYPE

    SYNTAX      RpMauEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION 

        "An entry in the table, containing information

         about a single MAU."

    INDEX       { rpMauGroupIndex, rpMauPortIndex, rpMauIndex }

    ::= { rpMauTable 1 }

RpMauEntry ::= SEQUENCE {

    rpMauGroupIndex                 Integer32,

    rpMauPortIndex                  Integer32,

    rpMauIndex                      Integer32,

    rpMauType                       AutonomousType,

    rpMauStatus                     INTEGER,

    rpMauMediaAvailable             IANAifMauMediaAvailable,

    rpMauMediaAvailableStateExits   Counter32,

    rpMauJabberState                INTEGER,

    rpMauJabberingStateEnters       Counter32,

    rpMauFalseCarriers              Counter32

}

rpMauGroupIndex OBJECT-TYPE

    SYNTAX      Integer32 (1..2147483647)

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "This variable uniquely identifies the group

         containing the port to which the MAU described

         by this entry is connected.

         Note:  In practice, a group will generally be

         a field-replaceable unit (i.e., module, card,

         or board) that can fit in the physical system

         enclosure, and the group number will correspond

         to a number marked on the physical enclosure.

         The group denoted by a particular value of this

         object is the same as the group denoted by the

         same value of rptrGroupIndex."

    REFERENCE   

        "RFC 2108, rptrGroupIndex."

    ::= { rpMauEntry 1 }

rpMauPortIndex OBJECT-TYPE

    SYNTAX      Integer32 (1..2147483647)

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "This variable uniquely identifies the repeater

         port within group rpMauGroupIndex to which the

         MAU described by this entry is connected."

    REFERENCE   

        "RFC 2108, rptrPortIndex."

    ::= { rpMauEntry 2 }

rpMauIndex OBJECT-TYPE

    SYNTAX      Integer32 (1..2147483647)

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "This variable uniquely identifies the MAU

         described by this entry from among other

         MAUs connected to the same port

         (rpMauPortIndex)."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.1, aMAUID."

    ::= { rpMauEntry 3 }

rpMauType OBJECT-TYPE

    SYNTAX      AutonomousType

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "This object identifies the MAU type.  Values for

         standard IEEE 802.3 MAU types are defined in the

         IANA maintained IANA-MAU-MIB module, as

         OBJECT-IDENTITIES of dot3MauType.

         If the MAU type is unknown, the object identifier

         zeroDotZero is returned."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.2, aMAUType."

    ::= { rpMauEntry 4 }

rpMauStatus OBJECT-TYPE

    SYNTAX      INTEGER { other(1), unknown(2), operational(3), 

                    standby(4), shutdown(5), reset(6) }

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION 

        "The current state of the MAU.  This object MAY

         be implemented as a read-only object by those

         agents and MAUs that do not implement software

         control of the MAU state.  Some agents may not

         support setting the value of this object to some

         of the enumerated values.

         The value other(1) is returned if the MAU is in

         a state other than one of the states 2 through

         6.

         The value unknown(2) is returned when the MAU's

         true state is unknown; for example, when it is

         being initialized.

         A MAU in the operational(3) state is fully

         functional; it operates, and passes signals to its

         attached DTE or repeater port in accordance to

         its specification.

         A MAU in standby(4) state forces DI and CI to

         idle, and the media transmitter to idle or fault,

         if supported.  Standby(4) mode only applies to

         link type MAUs.  The state of

         rpMauMediaAvailable is unaffected.

         A MAU in shutdown(5) state assumes the same

         condition on DI, CI, and the media transmitter,

         as though it were powered down or not connected.

         The MAU MAY return other(1) value for the

         rpMauJabberState and rpMauMediaAvailable objects

         when it is in this state.  For an AUI, this

         state will remove power from the AUI.

         Setting this variable to the value reset(6)

         resets the MAU in the same manner as a

         power-off, power-on cycle of at least one-half

         second would.  The agent is not required to

         return the value reset(6).

         Setting this variable to the value

         operational(3), standby(4), or shutdown(5)

         causes the MAU to assume the respective state,

         except that setting a mixing-type MAU or an AUI

         to standby(4) will cause the MAU to enter the

         shutdown state."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.7, aMAUAdminState,

         30.5.1.2.2, acMAUAdminControl, and 30.5.1.2.1,

         acResetMAU."

    ::= { rpMauEntry 5 }

rpMauMediaAvailable OBJECT-TYPE

    SYNTAX      IANAifMauMediaAvailable

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "This object identifies Media Available state of

         the MAU, complementary to the rpMauStatus.  Values

         for the standard IEEE 802.3 Media Available states

         are defined in the IANA maintained IANA-MAU-MIB

         module, as IANAifMauMediaAvailable TC."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.4, aMediaAvailable."

    ::= { rpMauEntry 6 }

rpMauMediaAvailableStateExits OBJECT-TYPE

    SYNTAX      Counter32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "A count of the number of times that

         rpMauMediaAvailable for this MAU instance leaves

         the state available(3).

         Discontinuities in the value of this counter can

         occur at re-initialization of the management

         system and at other times, as indicated by the

         value of rptrMonitorPortLastChange."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.5, aLoseMediaCounter.

         RFC 2108, rptrMonitorPortLastChange"

    ::= { rpMauEntry 7 }

rpMauJabberState OBJECT-TYPE

    SYNTAX      INTEGER { other(1), unknown(2), noJabber(3), 

                    jabbering(4) }

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "The value other(1) is returned if the jabber

         state is not 2, 3, or 4.  The agent MUST always

         return other(1) for MAU type dot3MauTypeAUI.

         The value unknown(2) is returned when the MAU's

         true state is unknown; for example, when it is

         being initialized.

         If the MAU is not jabbering the agent returns

         noJabber(3).  This is the 'normal' state.

         If the MAU is in jabber state the agent returns

         the jabbering(4) value."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.6, aJabber.jabberFlag."

    ::= { rpMauEntry 8 }

rpMauJabberingStateEnters OBJECT-TYPE

    SYNTAX      Counter32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "A count of the number of times that

         mauJabberState for this MAU instance enters the

         state jabbering(4).  For MAUs of type

         dot3MauTypeAUI, dot3MauType100BaseT4,

         dot3MauType100BaseTX, dot3MauType100BaseFX, and

         all 1000Mbps types, this counter will always

         indicate zero.

         Discontinuities in the value of this counter can

         occur at re-initialization of the management

         system and at other times, as indicated by the

         value of rptrMonitorPortLastChange."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.6, aJabber.jabberCounter.

         RFC 2108, rptrMonitorPortLastChange"

    ::= { rpMauEntry 9 }

rpMauFalseCarriers OBJECT-TYPE

    SYNTAX      Counter32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "A count of the number of false carrier events

         during IDLE in 100BASE-X links.  This counter

         does not increment at the symbol rate.  It can

         increment after a valid carrier completion at a

         maximum rate of once per 100 ms until the next

         carrier event.

         This counter increments only for MAUs of type

         dot3MauType100BaseT4, dot3MauType100BaseTX,

         dot3MauType100BaseFX, and all 1000Mbps types.

         For all other MAU types, this counter will

         always indicate zero.

         The approximate minimum time for rollover of

         this counter is 7.4 hours.

         Discontinuities in the value of this counter can

         occur at re-initialization of the management

         system and at other times, as indicated by the

         value of rptrMonitorPortLastChange."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.10, aFalseCarriers.

         RFC 2108, rptrMonitorPortLastChange"

    ::= { rpMauEntry 10 }

rpJackTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF RpJackEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION 

        "Information about the external jacks attached

         to MAUs attached to the ports of a repeater."

    ::= { dot3RpMauBasicGroup 2 }

rpJackEntry OBJECT-TYPE

    SYNTAX      RpJackEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION 

        "An entry in the table, containing information

         about a particular jack."

    INDEX       { rpMauGroupIndex, rpMauPortIndex, rpMauIndex, 

                  rpJackIndex }

    ::= { rpJackTable 1 }

RpJackEntry ::= SEQUENCE {

    rpJackIndex     Integer32,

    rpJackType      IANAifJackType

}

rpJackIndex OBJECT-TYPE

    SYNTAX      Integer32 (1..2147483647)

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION 

        "This variable uniquely identifies the jack

         described by this entry from among other jacks

         attached to the same MAU (rpMauIndex)."

    ::= { rpJackEntry 1 }

rpJackType OBJECT-TYPE

    SYNTAX      IANAifJackType

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "The jack connector type, as it appears on the

         outside of the system."

    ::= { rpJackEntry 2 }

dot3IfMauBasicGroup OBJECT IDENTIFIER

    ::= { snmpDot3MauMgt 2 }

ifMauTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF IfMauEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION 

        "Table of descriptive and status information

         about MAU(s) attached to an interface."

    ::= { dot3IfMauBasicGroup 1 }

ifMauEntry OBJECT-TYPE

    SYNTAX      IfMauEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION 

        "An entry in the table, containing information

         about a single MAU."

    INDEX       { ifMauIfIndex, ifMauIndex }

    ::= { ifMauTable 1 }

IfMauEntry ::= SEQUENCE {

    ifMauIfIndex                    InterfaceIndex,

    ifMauIndex                      Integer32,

    ifMauType                       AutonomousType,

    ifMauStatus                     INTEGER,

    ifMauMediaAvailable             IANAifMauMediaAvailable,

    ifMauMediaAvailableStateExits   Counter32,

    ifMauJabberState                INTEGER,

    ifMauJabberingStateEnters       Counter32,

    ifMauFalseCarriers              Counter32,

    ifMauTypeList                   Integer32,

    ifMauDefaultType                AutonomousType,

    ifMauAutoNegSupported           TruthValue,

    ifMauTypeListBits               IANAifMauTypeListBits,

    ifMauHCFalseCarriers            Counter64

}

ifMauIfIndex OBJECT-TYPE

    SYNTAX      InterfaceIndex

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "This variable uniquely identifies the interface

         to which the MAU described by this entry is

         connected."

    REFERENCE   

        "RFC 2863, ifIndex"

    ::= { ifMauEntry 1 }

ifMauIndex OBJECT-TYPE

    SYNTAX      Integer32 (1..2147483647)

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "This variable uniquely identifies the MAU

         described by this entry from among other MAUs

         connected to the same interface (ifMauIfIndex)."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.1, aMAUID."

    ::= { ifMauEntry 2 }

ifMauType OBJECT-TYPE

    SYNTAX      AutonomousType

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "This object identifies the MAU type.  Values for

         standard IEEE 802.3 MAU types are defined in the

         IANA maintained IANA-MAU-MIB module, as

         OBJECT-IDENTITIES of dot3MauType.

         If the MAU type is unknown, the object identifier

         zeroDotZero is returned.

         This object represents the operational type of

         the MAU, as determined by either 1) the result

         of the auto-negotiation function or 2) if

         auto-negotiation is not enabled or is not

         implemented for this MAU, by the value of the

         object ifMauDefaultType.  In case 2), a set to

         the object ifMauDefaultType will force the MAU

         into the new operating mode."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.2, aMAUType."

    ::= { ifMauEntry 3 }

ifMauStatus OBJECT-TYPE

    SYNTAX      INTEGER { other(1), unknown(2), operational(3), 

                    standby(4), shutdown(5), reset(6) }

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION 

        "The current state of the MAU.  This object MAY

         be implemented as a read-only object by those

         agents and MAUs that do not implement software

         control of the MAU state.  Some agents may not

         support setting the value of this object to some

         of the enumerated values.

         The value other(1) is returned if the MAU is in

         a state other than one of the states 2 through

         6.

         The value unknown(2) is returned when the MAU's

         true state is unknown; for example, when it is

         being initialized.

         A MAU in the operational(3) state is fully

         functional; it operates, and passes signals to its

         attached DTE or repeater port in accordance to

         its specification.

         A MAU in standby(4) state forces DI and CI to

         idle and the media transmitter to idle or fault,

         if supported.  Standby(4) mode only applies to

         link type MAUs.  The state of

         ifMauMediaAvailable is unaffected.

         A MAU in shutdown(5) state assumes the same

         condition on DI, CI, and the media transmitter,

         as though it were powered down or not connected.

         The MAU MAY return other(1) value for the

         ifMauJabberState and ifMauMediaAvailable objects

         when it is in this state.  For an AUI, this

         state will remove power from the AUI.

         Setting this variable to the value reset(6)

         resets the MAU in the same manner as a

         power-off, power-on cycle of at least one-half

         second would.  The agent is not required to

         return the value reset(6).

         Setting this variable to the value

         operational(3), standby(4), or shutdown(5)

         causes the MAU to assume the respective state,

         except that setting a mixing-type MAU or an AUI

         to standby(4) will cause the MAU to enter the

         shutdown state."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.7, aMAUAdminState,

         30.5.1.2.2, acMAUAdminControl, and 30.5.1.2.1,

         acResetMAU."

    ::= { ifMauEntry 4 }

ifMauMediaAvailable OBJECT-TYPE

    SYNTAX      IANAifMauMediaAvailable

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "This object identifies Media Available state of

         the MAU, complementary to the ifMauStatus.  Values

         for the standard IEEE 802.3 Media Available states

         are defined in the IANA maintained IANA-MAU-MIB

         module, as IANAifMauMediaAvailable TC."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.4, aMediaAvailable."

    ::= { ifMauEntry 5 }

ifMauMediaAvailableStateExits OBJECT-TYPE

    SYNTAX      Counter32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "A count of the number of times that

         ifMauMediaAvailable for this MAU instance leaves

         the state available(3).

         Discontinuities in the value of this counter can

         occur at re-initialization of the management

         system and at other times, as indicated by the

         value of ifCounterDiscontinuityTime."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.5, aLoseMediaCounter.

         RFC 2863, ifCounterDiscontinuityTime."

    ::= { ifMauEntry 6 }

ifMauJabberState OBJECT-TYPE

    SYNTAX      INTEGER { other(1), unknown(2), noJabber(3), 

                    jabbering(4) }

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "The value other(1) is returned if the jabber

         state is not 2, 3, or 4.  The agent MUST always

         return other(1) for MAU type dot3MauTypeAUI.

         The value unknown(2) is returned when the MAU's

         true state is unknown; for example, when it is

         being initialized.

         If the MAU is not jabbering the agent returns

         noJabber(3).  This is the 'normal' state.

         If the MAU is in jabber state the agent returns

         the jabbering(4) value."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.6, aJabber.jabberFlag."

    ::= { ifMauEntry 7 }

ifMauJabberingStateEnters OBJECT-TYPE

    SYNTAX      Counter32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "A count of the number of times that

         mauJabberState for this MAU instance enters the

         state jabbering(4).  This counter will always

         indicate zero for MAUs of type dot3MauTypeAUI

         and those of speeds above 10Mbps.

         Discontinuities in the value of this counter can

         occur at re-initialization of the management

         system and at other times, as indicated by the

         value of ifCounterDiscontinuityTime."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.6, aJabber.jabberCounter.

         RFC 2863, ifCounterDiscontinuityTime."

    ::= { ifMauEntry 8 }

ifMauFalseCarriers OBJECT-TYPE

    SYNTAX      Counter32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "A count of the number of false carrier events

         during IDLE in 100BASE-X and 1000BASE-X links.

         For all other MAU types, this counter will

         always indicate zero.  This counter does not

         increment at the symbol rate.

         It can increment after a valid carrier

         completion at a maximum rate of once per 100 ms

         for 100BASE-X and once per 10us for 1000BASE-X

         until the next CarrierEvent.

         This counter can roll over very quickly.  A

         management station is advised to poll the

         ifMauHCFalseCarriers instead of this counter in

         order to avoid loss of information.

         Discontinuities in the value of this counter can

         occur at re-initialization of the management

         system and at other times, as indicated by the

         value of ifCounterDiscontinuityTime."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.10, aFalseCarriers.

         RFC 2863, ifCounterDiscontinuityTime."

    ::= { ifMauEntry 9 }

ifMauTypeList OBJECT-TYPE

    SYNTAX      Integer32

    MAX-ACCESS  read-only

    STATUS      deprecated

    DESCRIPTION 

        "********* THIS OBJECT IS DEPRECATED **********

         This object has been deprecated in favour of

         ifMauTypeListBits.

         A value that uniquely identifies the set of

         possible IEEE 802.3 types that the MAU could be.

         The value is a sum that initially takes the

         value zero.  Then, for each type capability of

         this MAU, 2 raised to the power noted below is

         added to the sum.  For example, a MAU that has

         the capability to be only 10BASE-T would have a

         value of 512 (2**9).  In contrast, a MAU that

         supports both 10Base-T (full duplex) and

         100BASE-TX (full duplex) would have a value of

         ((2**11) + (2**16)), or 67584.

         The powers of 2 assigned to the capabilities are

         these:

         Power  Capability

           0      other or unknown

           1      AUI

           2      10BASE-5

           3      FOIRL

           4      10BASE-2

           5      10BASE-T duplex mode unknown

           6      10BASE-FP

           7      10BASE-FB

           8      10BASE-FL duplex mode unknown

           9      10BROAD36

          10      10BASE-T  half duplex mode

          11      10BASE-T  full duplex mode

          12      10BASE-FL half duplex mode

          13      10BASE-FL full duplex mode

          14      100BASE-T4

          15      100BASE-TX half duplex mode

          16      100BASE-TX full duplex mode

          17      100BASE-FX half duplex mode

          18      100BASE-FX full duplex mode

          19      100BASE-T2 half duplex mode

          20      100BASE-T2 full duplex mode

         If auto-negotiation is present on this MAU, this

         object will map to ifMauAutoNegCapability."

    ::= { ifMauEntry 10 }

ifMauDefaultType OBJECT-TYPE

    SYNTAX      AutonomousType

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION 

        "This object identifies the default

         administrative baseband MAU type to be used in

         conjunction with the operational MAU type

         denoted by ifMauType.

         The set of possible values for this object is

         the same as the set defined for the ifMauType

         object.

         This object represents the

         administratively-configured type of the MAU.  If

         auto-negotiation is not enabled or is not

         implemented for this MAU, the value of this

         object determines the operational type of the

         MAU.  In this case, a set to this object will

         force the MAU into the specified operating mode.

         If auto-negotiation is implemented and enabled

         for this MAU, the operational type of the MAU

         is determined by auto-negotiation, and the value

         of this object denotes the type to which the MAU

         will automatically revert if/when

         auto-negotiation is later disabled.

         NOTE TO IMPLEMENTORS:  It may be necessary to

         provide for underlying hardware implementations

         which do not follow the exact behavior specified

         above.  In particular, when

         ifMauAutoNegAdminStatus transitions from enabled

         to disabled, the agent implementation MUST

         ensure that the operational type of the MAU (as

         reported by ifMauType) correctly transitions to

         the value specified by this object, rather than

         continuing to operate at the value earlier

         determined by the auto-negotiation function."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.1, aMAUID, and 22.2.4.1.4."

    ::= { ifMauEntry 11 }

ifMauAutoNegSupported OBJECT-TYPE

    SYNTAX      TruthValue

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "This object indicates whether or not

         auto-negotiation is supported on this MAU."

    ::= { ifMauEntry 12 }

ifMauTypeListBits OBJECT-TYPE

    SYNTAX      IANAifMauTypeListBits

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "A value that uniquely identifies the set of

         possible IEEE 802.3 types that the MAU could be.

         If auto-negotiation is present on this MAU, this

         object will map to ifMauAutoNegCapabilityBits.

         Note that this MAU may be capable of operating

         as a MAU type that is beyond the scope of this

         MIB.  This is indicated by returning the

         bit value bOther in addition to any bit values

         for standard capabilities that are listed in the

         IANAifMauTypeListBits TC."

    ::= { ifMauEntry 13 }

ifMauHCFalseCarriers OBJECT-TYPE

    SYNTAX      Counter64

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION 

        "A count of the number of false carrier events

         during IDLE in 100BASE-X and 1000BASE-X links.

         For all other MAU types, this counter will

         always indicate zero.  This counter does not

         increment at the symbol rate.

         This counter is a 64-bit version of

         ifMauFalseCarriers.  Since the 32-bit version of

         this counter can roll over very quickly,

         management stations are advised to poll the

         64-bit version instead, in order to avoid loss

         of information.

         Discontinuities in the value of this counter can

         occur at re-initialization of the management

         system and at other times, as indicated by the

         value of ifCounterDiscontinuityTime."

    REFERENCE   

        "[IEEE802.3], 30.5.1.1.10, aFalseCarriers.

         RFC 2863, ifCounterDiscontinuityTime."

    ::= { ifMauEntry 14 }

ifJackTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF IfJackEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION 

        "Information about the external jacks attached

         to MAUs attached to an interface."

    ::= { dot3IfMauBasicGroup 2 }

ifJackEntry OBJECT-TYPE

    SYNTAX      IfJackEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION 

        "An entry in the table, containing information