/*							-- DO NOT EDIT --

 * Generated by smidump version 0.4.8:

 *   smidump -f corba MAU-MIB

 *

 * Derived from MAU-MIB:

 *   Management information for 802.3 MAUs.

 *   

 *   The following reference is used throughout this MIB module:

 *   

 *   [IEEE802.3] refers to:

 *      IEEE Std 802.3, 2005 Edition: 'IEEE Standard for Information

 *      technology - Telecommunications and information exchange

 *      between systems - Local and metropolitan area networks -

 *      Specific requirements - Part 3: Carrier sense multiple

 *      access with collision detection (CSMA/CD) access method and

 *      physical layer specifications'.

 *   

 *      Of particular interest is Clause 30, 'Management'.

 *   

 *   Copyright (C) The IETF Trust (2007).

 *   This version of this MIB module is part of RFC 4836;

 *   see the RFC itself for full legal notices.

 *

 * Revision 2007-04-21 00:00:

 *   Updated to reference IANA maintaned textual

 *   conventions for MAU types, Media Availability state,

 *   Auto Negotiation capabilities, and jack types,

 *   instead of using internally defined values.

 *   

 *   This version is published as RFC 4836.

 *

 * Revision 2003-09-19 00:00:

 *   Updated to include support for 10 Gb/s MAUs.

 *   This resulted in the following revisions:

 *   - Added OBJECT-IDENTITY definitions for

 *     10 gigabit MAU types

 *   

 *   

 *   

 *   - Added fiberLC jack type to JackType TC

 *   - Extended ifMauTypeListBits with bits for

 *     the 10 gigabit MAU types

 *   - Added enumerations to ifMauMediaAvailable,

 *     and updated its DESCRIPTION to reflect

 *     behaviour at 10 Gb/s

 *   - Added 64-bit version of ifMauFalseCarriers

 *     and added mauIfGrpHCStats object group to

 *     contain the new object

 *   - Deprecated mauModIfCompl2 and replaced it

 *     with mauModIfCompl3, which includes the new

 *     object group

 *   

 *    This version published as RFC 3636.

 *

 * Revision 1999-08-24 04:00:

 *   This version published as RFC 2668.  Updated

 *   to include support for 1000 Mb/sec

 *   MAUs and flow control negotiation.

 *

 * Revision 1997-10-31 00:00:

 *   Version published as RFC 2239.

 *

 * Revision 1993-09-30 00:00:

 *   Initial version, published as RFC 1515.

 *

 * $Id: MAU_MIB.idl 8090 2008-04-18 12:56:29Z strauss $

 */

#ifndef _MAU_MIB_IDL_

#define _MAU_MIB_IDL_

#include <ASN1Types.idl>

#include <SNMPMgmt.idl>

#include <IANA_MAU_MIB.idl>

#include <IF_MIB.idl>

#include <SNMPv2_SMI.idl>

#include <SNMPv2_TC.idl>

module MAU_MIB {

    typedef IANA_MAU_MIB::IANAifJackTypeType IANAifJackTypeType;

    typedef IANA_MAU_MIB::IANAifMauAutoNegCapBitsType IANAifMauAutoNegCapBitsType;

    typedef IANA_MAU_MIB::IANAifMauMediaAvailableType IANAifMauMediaAvailableType;

    typedef IANA_MAU_MIB::IANAifMauTypeListBitsType IANAifMauTypeListBitsType;

    typedef IF_MIB::InterfaceIndexType InterfaceIndexType;

    typedef SNMPv2_SMI::Counter32Type Counter32Type;

    typedef SNMPv2_SMI::Counter64Type Counter64Type;

    typedef SNMPv2_SMI::Integer32Type Integer32Type;

    typedef SNMPv2_TC::AutonomousTypeType AutonomousTypeType;

    typedef SNMPv2_TC::TruthValueType TruthValueType;

    const string moduleIdentity = "mauMod";

    const ASN1_ObjectIdentifier mauMod = "::MAU_MIB::mauMod";

    /*

             Management information for 802.3 MAUs.

             The following reference is used throughout this MIB module:

             [IEEE802.3] refers to:

                IEEE Std 802.3, 2005 Edition: 'IEEE Standard for Information

                technology - Telecommunications and information exchange

                between systems - Local and metropolitan area networks -

                Specific requirements - Part 3: Carrier sense multiple

                access with collision detection (CSMA/CD) access method and

                physical layer specifications'.

                Of particular interest is Clause 30, 'Management'.

             Copyright (C) The IETF Trust (2007).

             This version of this MIB module is part of RFC 4836;

             see the RFC itself for full legal notices.

    LAST-UPDATED:   200704210000Z

    ORGANIZATION:

            "IETF Ethernet Interfaces and Hub MIB Working Group"

    CONTACT-INFO:

            "WG charter:

             http://www.ietf.org/html.charters/hubmib-charter.html

             Mailing Lists:

             General Discussion: hubmib@ietf.org

             To Subscribe: hubmib-request@ietf.org

             In Body: subscribe your_email_address

             Chair: Bert Wijnen

             Postal: Alcatel-Lucent

                   Schagen 33

                   3461 GL Linschoten

                   Netherlands

             Phone: +31-348-407-775

             EMail: bwijnen@alcatel-lucent.com

             Editor: Edward Beili

             Postal: Actelis Networks Inc.

                   25 Bazel St., P.O.B. 10173

                   Petach-Tikva 10173

                   Israel

              Tel: +972-3-924-3491

             EMail: edward.beili@actelis.com"

    REVISION:       "200704210000Z"

    REVISION-DESCRIPTION:

            "Updated to reference IANA maintaned textual

             conventions for MAU types, Media Availability state,

             Auto Negotiation capabilities, and jack types,

             instead of using internally defined values.

             This version is published as RFC 4836."

    REVISION:       "200309190000Z"

    REVISION-DESCRIPTION:

            "Updated to include support for 10 Gb/s MAUs.

             This resulted in the following revisions:

             - Added OBJECT-IDENTITY definitions for

               10 gigabit MAU types

             - Added fiberLC jack type to JackType TC

             - Extended ifMauTypeListBits with bits for

               the 10 gigabit MAU types

             - Added enumerations to ifMauMediaAvailable,

               and updated its DESCRIPTION to reflect

               behaviour at 10 Gb/s

             - Added 64-bit version of ifMauFalseCarriers

               and added mauIfGrpHCStats object group to

               contain the new object

             - Deprecated mauModIfCompl2 and replaced it

               with mauModIfCompl3, which includes the new

               object group

              This version published as RFC 3636."

    REVISION:       "199908240400Z"

    REVISION-DESCRIPTION:

            "This version published as RFC 2668.  Updated

             to include support for 1000 Mb/sec

             MAUs and flow control negotiation."

    REVISION:       "199710310000Z"

    REVISION-DESCRIPTION:

            "Version published as RFC 2239."

    REVISION:       "199309300000Z"

    REVISION-DESCRIPTION:

            "Initial version, published as RFC 1515."

    */

    typedef ASN1_Integer RpMauGroupIndexType; 

    typedef ASN1_Integer RpMauPortIndexType; 

    typedef ASN1_Integer RpMauIndexType; 

    typedef ASN1_Integer RpMauStatusType; 

    const RpMauStatusType RpMauStatusType_other = 1;

    const RpMauStatusType RpMauStatusType_unknown = 2;

    const RpMauStatusType RpMauStatusType_operational = 3;

    const RpMauStatusType RpMauStatusType_standby = 4;

    const RpMauStatusType RpMauStatusType_shutdown = 5;

    const RpMauStatusType RpMauStatusType_reset = 6;

    const string RpMauStatusType_NameNumberList = "other (1) , unknown (2) , operational (3) , standby (4) , shutdown (5) , reset (6)";

    typedef ASN1_Integer RpMauJabberStateType; 

    const RpMauJabberStateType RpMauJabberStateType_other = 1;

    const RpMauJabberStateType RpMauJabberStateType_unknown = 2;

    const RpMauJabberStateType RpMauJabberStateType_noJabber = 3;

    const RpMauJabberStateType RpMauJabberStateType_jabbering = 4;

    const string RpMauJabberStateType_NameNumberList = "other (1) , unknown (2) , noJabber (3) , jabbering (4)";

    typedef ASN1_Integer RpJackIndexType; 

    typedef ASN1_Integer IfMauIndexType; 

    typedef ASN1_Integer IfMauStatusType; 

    const IfMauStatusType IfMauStatusType_other = 1;

    const IfMauStatusType IfMauStatusType_unknown = 2;

    const IfMauStatusType IfMauStatusType_operational = 3;

    const IfMauStatusType IfMauStatusType_standby = 4;

    const IfMauStatusType IfMauStatusType_shutdown = 5;

    const IfMauStatusType IfMauStatusType_reset = 6;

    const string IfMauStatusType_NameNumberList = "other (1) , unknown (2) , operational (3) , standby (4) , shutdown (5) , reset (6)";

    typedef ASN1_Integer IfMauJabberStateType; 

    const IfMauJabberStateType IfMauJabberStateType_other = 1;

    const IfMauJabberStateType IfMauJabberStateType_unknown = 2;

    const IfMauJabberStateType IfMauJabberStateType_noJabber = 3;

    const IfMauJabberStateType IfMauJabberStateType_jabbering = 4;

    const string IfMauJabberStateType_NameNumberList = "other (1) , unknown (2) , noJabber (3) , jabbering (4)";

    typedef ASN1_Integer IfJackIndexType; 

    typedef ASN1_Integer IfMauAutoNegAdminStatusType; 

    const IfMauAutoNegAdminStatusType IfMauAutoNegAdminStatusType_enabled = 1;

    const IfMauAutoNegAdminStatusType IfMauAutoNegAdminStatusType_disabled = 2;

    const string IfMauAutoNegAdminStatusType_NameNumberList = "enabled (1) , disabled (2)";

    typedef ASN1_Integer IfMauAutoNegRemoteSignalingType; 

    const IfMauAutoNegRemoteSignalingType IfMauAutoNegRemoteSignalingType_detected = 1;

    const IfMauAutoNegRemoteSignalingType IfMauAutoNegRemoteSignalingType_notdetected = 2;

    const string IfMauAutoNegRemoteSignalingType_NameNumberList = "detected (1) , notdetected (2)";

    typedef ASN1_Integer IfMauAutoNegConfigType; 

    const IfMauAutoNegConfigType IfMauAutoNegConfigType_other = 1;

    const IfMauAutoNegConfigType IfMauAutoNegConfigType_configuring = 2;

    const IfMauAutoNegConfigType IfMauAutoNegConfigType_complete = 3;

    const IfMauAutoNegConfigType IfMauAutoNegConfigType_disabled = 4;

    const IfMauAutoNegConfigType IfMauAutoNegConfigType_parallelDetectFail = 5;

    const string IfMauAutoNegConfigType_NameNumberList = "other (1) , configuring (2) , complete (3) , disabled (4) , parallelDetectFail (5)";

    typedef ASN1_Integer IfMauAutoNegRestartType; 

    const IfMauAutoNegRestartType IfMauAutoNegRestartType_restart = 1;

    const IfMauAutoNegRestartType IfMauAutoNegRestartType_norestart = 2;

    const string IfMauAutoNegRestartType_NameNumberList = "restart (1) , norestart (2)";

    typedef ASN1_Integer IfMauAutoNegRemoteFaultAdvertisedType; 

    const IfMauAutoNegRemoteFaultAdvertisedType IfMauAutoNegRemoteFaultAdvertisedType_noError = 1;

    const IfMauAutoNegRemoteFaultAdvertisedType IfMauAutoNegRemoteFaultAdvertisedType_offline = 2;

    const IfMauAutoNegRemoteFaultAdvertisedType IfMauAutoNegRemoteFaultAdvertisedType_linkFailure = 3;

    const IfMauAutoNegRemoteFaultAdvertisedType IfMauAutoNegRemoteFaultAdvertisedType_autoNegError = 4;

    const string IfMauAutoNegRemoteFaultAdvertisedType_NameNumberList = "noError (1) , offline (2) , linkFailure (3) , autoNegError (4)";

    typedef ASN1_Integer IfMauAutoNegRemoteFaultReceivedType; 

    const IfMauAutoNegRemoteFaultReceivedType IfMauAutoNegRemoteFaultReceivedType_noError = 1;

    const IfMauAutoNegRemoteFaultReceivedType IfMauAutoNegRemoteFaultReceivedType_offline = 2;

    const IfMauAutoNegRemoteFaultReceivedType IfMauAutoNegRemoteFaultReceivedType_linkFailure = 3;

    const IfMauAutoNegRemoteFaultReceivedType IfMauAutoNegRemoteFaultReceivedType_autoNegError = 4;

    const string IfMauAutoNegRemoteFaultReceivedType_NameNumberList = "noError (1) , offline (2) , linkFailure (3) , autoNegError (4)";

    interface dot3RpMauBasicGroup : SNMPMgmt::SmiEntry {

        /*

             Table of descriptive and status information

             about the MAU(s) attached to the ports of a

             repeater.

        */

        SNMPMgmt::SmiTableIterator get_rpMauTable();

        /*

             Information about the external jacks attached

             to MAUs attached to the ports of a repeater.

        */

        SNMPMgmt::SmiTableIterator get_rpJackTable();

    };

    /*

             An entry in the table, containing information

             about a single MAU.

    */

    interface rpMauEntry : SNMPMgmt::SmiEntry {

        const string IndexVarList = "rpMauGroupIndex rpMauPortIndex rpMauIndex";

        /*

             This variable uniquely identifies the group

             containing the port to which the MAU described

             by this entry is connected.

             Note:  In practice, a group will generally be

             a field-replaceable unit (i.e., module, card,

             or board) that can fit in the physical system

             enclosure, and the group number will correspond

             to a number marked on the physical enclosure.

             The group denoted by a particular value of this

             object is the same as the group denoted by the

             same value of rptrGroupIndex.

        REFERENCE:

            "RFC 2108, rptrGroupIndex."

        */

        readonly attribute RpMauGroupIndexType rpMauGroupIndex;

        /*

             This variable uniquely identifies the repeater

             port within group rpMauGroupIndex to which the

             MAU described by this entry is connected.

        REFERENCE:

            "RFC 2108, rptrPortIndex."

        */

        readonly attribute RpMauPortIndexType rpMauPortIndex;

        /*

             This variable uniquely identifies the MAU

             described by this entry from among other

             MAUs connected to the same port

             (rpMauPortIndex).

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.1, aMAUID."

        */

        readonly attribute RpMauIndexType rpMauIndex;

        /*

             This object identifies the MAU type.  Values for

             standard IEEE 802.3 MAU types are defined in the

             IANA maintained IANA-MAU-MIB module, as

             OBJECT-IDENTITIES of dot3MauType.

             If the MAU type is unknown, the object identifier

             zeroDotZero is returned.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.2, aMAUType."

        */

        readonly attribute AutonomousTypeType rpMauType;

        /*

             The current state of the MAU.  This object MAY

             be implemented as a read-only object by those

             agents and MAUs that do not implement software

             control of the MAU state.  Some agents may not

             support setting the value of this object to some

             of the enumerated values.

             The value other(1) is returned if the MAU is in

             a state other than one of the states 2 through

             6.

             The value unknown(2) is returned when the MAU's

             true state is unknown; for example, when it is

             being initialized.

             A MAU in the operational(3) state is fully

             functional; it operates, and passes signals to its

             attached DTE or repeater port in accordance to

             its specification.

             A MAU in standby(4) state forces DI and CI to

             idle, and the media transmitter to idle or fault,

             if supported.  Standby(4) mode only applies to

             link type MAUs.  The state of

             rpMauMediaAvailable is unaffected.

             A MAU in shutdown(5) state assumes the same

             condition on DI, CI, and the media transmitter,

             as though it were powered down or not connected.

             The MAU MAY return other(1) value for the

             rpMauJabberState and rpMauMediaAvailable objects

             when it is in this state.  For an AUI, this

             state will remove power from the AUI.

             Setting this variable to the value reset(6)

             resets the MAU in the same manner as a

             power-off, power-on cycle of at least one-half

             second would.  The agent is not required to

             return the value reset(6).

             Setting this variable to the value

             operational(3), standby(4), or shutdown(5)

             causes the MAU to assume the respective state,

             except that setting a mixing-type MAU or an AUI

             to standby(4) will cause the MAU to enter the

             shutdown state.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.7, aMAUAdminState,

             30.5.1.2.2, acMAUAdminControl, and 30.5.1.2.1,

             acResetMAU."

        */

        attribute RpMauStatusType rpMauStatus;

        /*

             This object identifies Media Available state of

             the MAU, complementary to the rpMauStatus.  Values

             for the standard IEEE 802.3 Media Available states

             are defined in the IANA maintained IANA-MAU-MIB

             module, as IANAifMauMediaAvailable TC.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.4, aMediaAvailable."

        */

        readonly attribute IANAifMauMediaAvailableType rpMauMediaAvailable;

        /*

             A count of the number of times that

             rpMauMediaAvailable for this MAU instance leaves

             the state available(3).

             Discontinuities in the value of this counter can

             occur at re-initialization of the management

             system and at other times, as indicated by the

             value of rptrMonitorPortLastChange.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.5, aLoseMediaCounter.

             RFC 2108, rptrMonitorPortLastChange"

        */

        readonly attribute Counter32Type rpMauMediaAvailableStateExits;

        /*

             The value other(1) is returned if the jabber

             state is not 2, 3, or 4.  The agent MUST always

             return other(1) for MAU type dot3MauTypeAUI.

             The value unknown(2) is returned when the MAU's

             true state is unknown; for example, when it is

             being initialized.

             If the MAU is not jabbering the agent returns

             noJabber(3).  This is the 'normal' state.

             If the MAU is in jabber state the agent returns

             the jabbering(4) value.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.6, aJabber.jabberFlag."

        */

        readonly attribute RpMauJabberStateType rpMauJabberState;

        /*

             A count of the number of times that

             mauJabberState for this MAU instance enters the

             state jabbering(4).  For MAUs of type

             dot3MauTypeAUI, dot3MauType100BaseT4,

             dot3MauType100BaseTX, dot3MauType100BaseFX, and

             all 1000Mbps types, this counter will always

             indicate zero.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management

             system and at other times, as indicated by the

             value of rptrMonitorPortLastChange.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.6, aJabber.jabberCounter.

             RFC 2108, rptrMonitorPortLastChange"

        */

        readonly attribute Counter32Type rpMauJabberingStateEnters;

        /*

             A count of the number of false carrier events

             during IDLE in 100BASE-X links.  This counter

             does not increment at the symbol rate.  It can

             increment after a valid carrier completion at a

             maximum rate of once per 100 ms until the next

             carrier event.

             This counter increments only for MAUs of type

             dot3MauType100BaseT4, dot3MauType100BaseTX,

             dot3MauType100BaseFX, and all 1000Mbps types.

             For all other MAU types, this counter will

             always indicate zero.

             The approximate minimum time for rollover of

             this counter is 7.4 hours.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management

             system and at other times, as indicated by the

             value of rptrMonitorPortLastChange.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.10, aFalseCarriers.

             RFC 2108, rptrMonitorPortLastChange"

        */

        readonly attribute Counter32Type rpMauFalseCarriers;

    };

    /*

             An entry in the table, containing information

             about a particular jack.

    */

    interface rpJackEntry : SNMPMgmt::SmiEntry {

        const string IndexVarList = "rpMauGroupIndex rpMauPortIndex rpMauIndex rpJackIndex";

        /*

             The jack connector type, as it appears on the

             outside of the system.

        */

        readonly attribute IANAifJackTypeType rpJackType;

    };

    interface dot3IfMauBasicGroup : SNMPMgmt::SmiEntry {

        /*

             Table of descriptive and status information

             about MAU(s) attached to an interface.

        */

        SNMPMgmt::SmiTableIterator get_ifMauTable();

        /*

             Information about the external jacks attached

             to MAUs attached to an interface.

        */

        SNMPMgmt::SmiTableIterator get_ifJackTable();

    };

    /*

             An entry in the table, containing information

             about a single MAU.

    */

    interface ifMauEntry : SNMPMgmt::SmiEntry {

        const string IndexVarList = "ifMauIfIndex ifMauIndex";

        /*

             This variable uniquely identifies the interface

             to which the MAU described by this entry is

             connected.

        REFERENCE:

            "RFC 2863, ifIndex"

        */

        readonly attribute InterfaceIndexType ifMauIfIndex;

        /*

             This variable uniquely identifies the MAU

             described by this entry from among other MAUs

             connected to the same interface (ifMauIfIndex).

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.1, aMAUID."

        */

        readonly attribute IfMauIndexType ifMauIndex;

        /*

             This object identifies the MAU type.  Values for

             standard IEEE 802.3 MAU types are defined in the

             IANA maintained IANA-MAU-MIB module, as

             OBJECT-IDENTITIES of dot3MauType.

             If the MAU type is unknown, the object identifier

             zeroDotZero is returned.

             This object represents the operational type of

             the MAU, as determined by either 1) the result

             of the auto-negotiation function or 2) if

             auto-negotiation is not enabled or is not

             implemented for this MAU, by the value of the

             object ifMauDefaultType.  In case 2), a set to

             the object ifMauDefaultType will force the MAU

             into the new operating mode.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.2, aMAUType."

        */

        readonly attribute AutonomousTypeType ifMauType;

        /*

             The current state of the MAU.  This object MAY

             be implemented as a read-only object by those

             agents and MAUs that do not implement software

             control of the MAU state.  Some agents may not

             support setting the value of this object to some

             of the enumerated values.

             The value other(1) is returned if the MAU is in

             a state other than one of the states 2 through

             6.

             The value unknown(2) is returned when the MAU's

             true state is unknown; for example, when it is

             being initialized.

             A MAU in the operational(3) state is fully

             functional; it operates, and passes signals to its

             attached DTE or repeater port in accordance to

             its specification.

             A MAU in standby(4) state forces DI and CI to

             idle and the media transmitter to idle or fault,

             if supported.  Standby(4) mode only applies to

             link type MAUs.  The state of

             ifMauMediaAvailable is unaffected.

             A MAU in shutdown(5) state assumes the same

             condition on DI, CI, and the media transmitter,

             as though it were powered down or not connected.

             The MAU MAY return other(1) value for the

             ifMauJabberState and ifMauMediaAvailable objects

             when it is in this state.  For an AUI, this

             state will remove power from the AUI.

             Setting this variable to the value reset(6)

             resets the MAU in the same manner as a

             power-off, power-on cycle of at least one-half

             second would.  The agent is not required to

             return the value reset(6).

             Setting this variable to the value

             operational(3), standby(4), or shutdown(5)

             causes the MAU to assume the respective state,

             except that setting a mixing-type MAU or an AUI

             to standby(4) will cause the MAU to enter the

             shutdown state.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.7, aMAUAdminState,

             30.5.1.2.2, acMAUAdminControl, and 30.5.1.2.1,

             acResetMAU."

        */

        attribute IfMauStatusType ifMauStatus;

        /*

             This object identifies Media Available state of

             the MAU, complementary to the ifMauStatus.  Values

             for the standard IEEE 802.3 Media Available states

             are defined in the IANA maintained IANA-MAU-MIB

             module, as IANAifMauMediaAvailable TC.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.4, aMediaAvailable."

        */

        readonly attribute IANAifMauMediaAvailableType ifMauMediaAvailable;

        /*

             A count of the number of times that

             ifMauMediaAvailable for this MAU instance leaves

             the state available(3).

             Discontinuities in the value of this counter can

             occur at re-initialization of the management

             system and at other times, as indicated by the

             value of ifCounterDiscontinuityTime.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.5, aLoseMediaCounter.

             RFC 2863, ifCounterDiscontinuityTime."

        */

        readonly attribute Counter32Type ifMauMediaAvailableStateExits;

        /*

             The value other(1) is returned if the jabber

             state is not 2, 3, or 4.  The agent MUST always

             return other(1) for MAU type dot3MauTypeAUI.

             The value unknown(2) is returned when the MAU's

             true state is unknown; for example, when it is

             being initialized.

             If the MAU is not jabbering the agent returns

             noJabber(3).  This is the 'normal' state.

             If the MAU is in jabber state the agent returns

             the jabbering(4) value.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.6, aJabber.jabberFlag."

        */

        readonly attribute IfMauJabberStateType ifMauJabberState;

        /*

             A count of the number of times that

             mauJabberState for this MAU instance enters the

             state jabbering(4).  This counter will always

             indicate zero for MAUs of type dot3MauTypeAUI

             and those of speeds above 10Mbps.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management

             system and at other times, as indicated by the

             value of ifCounterDiscontinuityTime.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.6, aJabber.jabberCounter.

             RFC 2863, ifCounterDiscontinuityTime."

        */

        readonly attribute Counter32Type ifMauJabberingStateEnters;

        /*

             A count of the number of false carrier events

             during IDLE in 100BASE-X and 1000BASE-X links.

             For all other MAU types, this counter will

             always indicate zero.  This counter does not

             increment at the symbol rate.

             It can increment after a valid carrier

             completion at a maximum rate of once per 100 ms

             for 100BASE-X and once per 10us for 1000BASE-X

             until the next CarrierEvent.

             This counter can roll over very quickly.  A

             management station is advised to poll the

             ifMauHCFalseCarriers instead of this counter in

             order to avoid loss of information.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management

             system and at other times, as indicated by the

             value of ifCounterDiscontinuityTime.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.10, aFalseCarriers.

             RFC 2863, ifCounterDiscontinuityTime."

        */

        readonly attribute Counter32Type ifMauFalseCarriers;

        /*

             This object identifies the default

             administrative baseband MAU type to be used in

             conjunction with the operational MAU type

             denoted by ifMauType.

             The set of possible values for this object is

             the same as the set defined for the ifMauType

             object.

             This object represents the

             administratively-configured type of the MAU.  If

             auto-negotiation is not enabled or is not

             implemented for this MAU, the value of this

             object determines the operational type of the

             MAU.  In this case, a set to this object will

             force the MAU into the specified operating mode.

             If auto-negotiation is implemented and enabled

             for this MAU, the operational type of the MAU

             is determined by auto-negotiation, and the value

             of this object denotes the type to which the MAU

             will automatically revert if/when

             auto-negotiation is later disabled.

             NOTE TO IMPLEMENTORS:  It may be necessary to

             provide for underlying hardware implementations

             which do not follow the exact behavior specified

             above.  In particular, when

             ifMauAutoNegAdminStatus transitions from enabled

             to disabled, the agent implementation MUST

             ensure that the operational type of the MAU (as

             reported by ifMauType) correctly transitions to

             the value specified by this object, rather than

             continuing to operate at the value earlier

             determined by the auto-negotiation function.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.1, aMAUID, and 22.2.4.1.4."

        */

        attribute AutonomousTypeType ifMauDefaultType;

        /*

             This object indicates whether or not

             auto-negotiation is supported on this MAU.

        */

        readonly attribute TruthValueType ifMauAutoNegSupported;

        /*

             A value that uniquely identifies the set of

             possible IEEE 802.3 types that the MAU could be.

             If auto-negotiation is present on this MAU, this

             object will map to ifMauAutoNegCapabilityBits.

             Note that this MAU may be capable of operating

             as a MAU type that is beyond the scope of this

             MIB.  This is indicated by returning the

             bit value bOther in addition to any bit values

             for standard capabilities that are listed in the

             IANAifMauTypeListBits TC.

        */

        readonly attribute IANAifMauTypeListBitsType ifMauTypeListBits;

        /*

             A count of the number of false carrier events

             during IDLE in 100BASE-X and 1000BASE-X links.

             For all other MAU types, this counter will

             always indicate zero.  This counter does not

             increment at the symbol rate.

             This counter is a 64-bit version of

             ifMauFalseCarriers.  Since the 32-bit version of

             this counter can roll over very quickly,

             management stations are advised to poll the

             64-bit version instead, in order to avoid loss

             of information.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management

             system and at other times, as indicated by the

             value of ifCounterDiscontinuityTime.

        REFERENCE:

            "[IEEE802.3], 30.5.1.1.10, aFalseCarriers.

             RFC 2863, ifCounterDiscontinuityTime."

        */

        readonly attribute Counter64Type ifMauHCFalseCarriers;

    };

    /*

             An entry in the table, containing information

             about a particular jack.

    */

    interface ifJackEntry : SNMPMgmt::SmiEntry {

        const string IndexVarList = "ifMauIfIndex ifMauIndex ifJackIndex";

        /*

             The jack connector type, as it appears on the

             outside of the system.

        */

        readonly attribute IANAifJackTypeType ifJackType;

    };

    interface dot3IfMauAutoNegGroup : SNMPMgmt::SmiEntry {

        /*

             Configuration and status objects for the

             auto-negotiation function of MAUs attached to

             interfaces.

             The ifMauAutoNegTable applies to systems in

             which auto-negotiation is supported on one or

             more MAUs attached to interfaces.  Note that if

             auto-negotiation is present and enabled, the

             ifMauType object reflects the result of the

             auto-negotiation function.

        */

        SNMPMgmt::SmiTableIterator get_ifMauAutoNegTable();

    };