T11-FC-ROUTE-MIB DEFINITIONS ::= BEGIN

IMPORTS

    MODULE-IDENTITY, OBJECT-TYPE,

    Unsigned32, mib-2                   FROM SNMPv2-SMI  -- [RFC2578]

    MODULE-COMPLIANCE, OBJECT-GROUP     FROM SNMPv2-CONF -- [RFC2580]

    RowStatus, TimeStamp,

    StorageType                         FROM SNMPv2-TC   -- [RFC2579]

    InterfaceIndex, InterfaceIndexOrZero  FROM IF-MIB    -- [RFC2863]

    fcmInstanceIndex, fcmSwitchIndex,

    FcAddressIdOrZero, FcDomainIdOrZero FROM FC-MGMT-MIB -- [FC-MGMT]

    T11FabricIndex                      FROM T11-TC-MIB; -- [RFC4439]

t11FcRouteMIB MODULE-IDENTITY

    LAST-UPDATED "200608140000Z"

    ORGANIZATION "T11"

    CONTACT-INFO

              "     Claudio DeSanti

                    Cisco Systems, Inc.

                    170 West Tasman Drive

                    San Jose, CA 95134 USA

                    EMail: cds@cisco.com

                    Keith McCloghrie

                    Cisco Systems, Inc.

                    170 West Tasman Drive

                    San Jose, CA USA 95134

                    Email: kzm@cisco.com"

    DESCRIPTION

           "The MIB module for configuring and displaying Fibre

           Channel Route Information.

           Copyright (C) The Internet Society (2006).  This version

           of this MIB module is part of RFC 4625;  see the RFC

           itself for full legal notices."

    REVISION     "200608140000Z"

    DESCRIPTION

           "Initial version of this MIB module, published as RFC4625."

    ::= {mib-2 144 }

t11FcRouteNotifications OBJECT IDENTIFIER ::= { t11FcRouteMIB 0 }

t11FcRouteObjects       OBJECT IDENTIFIER ::= { t11FcRouteMIB 1 }

t11FcRouteConformance   OBJECT IDENTIFIER ::= { t11FcRouteMIB 2 }

--

-- Per-Fabric routing information

--

t11FcRouteFabricTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF T11FcRouteFabricEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

           "The table containing Fibre Channel Routing information

           that is specific to a Fabric."

    ::= { t11FcRouteObjects 1 }

t11FcRouteFabricEntry OBJECT-TYPE

    SYNTAX      T11FcRouteFabricEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

           "Each entry contains routing information specific to a

           particular Fabric on a particular switch (identified by

           values of fcmInstanceIndex and fcmSwitchIndex)."

    INDEX      { fcmInstanceIndex, fcmSwitchIndex,

                 t11FcRouteFabricIndex }

    ::= { t11FcRouteFabricTable 1 }

T11FcRouteFabricEntry ::=

    SEQUENCE {

        t11FcRouteFabricIndex      T11FabricIndex,

        t11FcRouteFabricLastChange TimeStamp

    }

t11FcRouteFabricIndex OBJECT-TYPE

    SYNTAX      T11FabricIndex

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

           "A unique index value that uniquely identifies a

           particular Fabric.

           In a Fabric conformant to FC-SW-3, only a single Fabric

           can operate within a physical infrastructure, and thus

           the value of this Fabric Index will always be 1.

           In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics

           can operate within one (or more) physical infrastructures.

           In such a case, index value is used to uniquely identify a

           particular Fabric within a physical infrastructure."

    ::= { t11FcRouteFabricEntry 1 }

t11FcRouteFabricLastChange OBJECT-TYPE

    SYNTAX      TimeStamp

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

           "The value of sysUpTime at the most recent time when any

           corresponding row in the t11FcRouteTable was created,

           modified, or deleted.  A corresponding row in the

           t11FcRouteTable is for the same management instance,

           the same switch, and same Fabric as the row in this table.

           If no change has occurred since the last restart of the

           management system, then the value of this object is 0."

    ::= { t11FcRouteFabricEntry 2 }

--

-- Fibre Channel Routing table

--

t11FcRouteTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF T11FcRouteEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

           "The Fibre Channel Routing tables for the

           locally managed switches.  This table lists all the

           routes that are configured in and/or computed by any

           local switch for any Fabric.

           Such routes are used by a switch to forward frames (of user

           data) on a Fabric.  The conceptual process is based on

           extracting the Destination Fibre Channel Address Identifier

           (D_ID) out of a received frame (of user data) and comparing

           it to each entry of this table that is applicable to the

           given switch and Fabric.  Such comparison consists of first

           performing a logical-AND of the extracted D_ID with a mask

           (the value of t11FcRouteDestMask) and second comparing the

           result of that 'AND' operation to the value of

           t11FcRouteDestAddrId.  A similar comparison is made of the

           Source Fibre Channel Address Identifier (S_ID) of a frame

           against the t11FcRouteSrcAddrId and t11FcRouteSrcMask values

           of an entry.  If an entry's value of t11FcRouteInInterface

           is non-zero, then a further comparison determines if the

           frame was received on the appropriate interface.  If all of

           these comparisons for a particular entry are successful,

           then that entry represents a potential route for forwarding

           the received frame.

           For entries configured by a user, t11FcRouteProto has

           the value 'netmgmt'; only entries of this type can be

           deleted by the user."

    ::= { t11FcRouteObjects 2 }

t11FcRouteEntry OBJECT-TYPE

    SYNTAX      T11FcRouteEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

           "Each entry contains a route to a particular destination,

           possibly from a particular subset of source addresses,

           on a particular Fabric via a particular output interface

           and learned in a particular manner."

    INDEX       { fcmInstanceIndex, fcmSwitchIndex,

                  t11FcRouteFabricIndex,

                  t11FcRouteDestAddrId, t11FcRouteDestMask,

                  t11FcRouteSrcAddrId, t11FcRouteSrcMask,

                  t11FcRouteInInterface, t11FcRouteProto,

                  t11FcRouteOutInterface }

    ::= { t11FcRouteTable 1 }

T11FcRouteEntry ::=

    SEQUENCE {

        t11FcRouteDestAddrId   FcAddressIdOrZero,

        t11FcRouteDestMask     FcAddressIdOrZero,

        t11FcRouteSrcAddrId    FcAddressIdOrZero,

        t11FcRouteSrcMask      FcAddressIdOrZero,

        t11FcRouteInInterface  InterfaceIndexOrZero,

        t11FcRouteProto        INTEGER,

        t11FcRouteOutInterface InterfaceIndex,

        t11FcRouteDomainId     FcDomainIdOrZero,

        t11FcRouteMetric       Unsigned32,

        t11FcRouteType         INTEGER,

        t11FcRouteIfDown       INTEGER,

        t11FcRouteStorageType  StorageType,

        t11FcRouteRowStatus    RowStatus

    }

t11FcRouteDestAddrId OBJECT-TYPE

    SYNTAX      FcAddressIdOrZero (SIZE (3))

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

           "The destination Fibre Channel Address Identifier of

           this route.  A zero-length string for this field is

           not allowed."

    ::= { t11FcRouteEntry 1 }

t11FcRouteDestMask OBJECT-TYPE

    SYNTAX      FcAddressIdOrZero

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

           "The mask to be logical-ANDed with a destination

           Fibre Channel Address Identifier before it is compared

           to the value in the t11FcRouteDestAddrId field.

           Allowed values are 255.255.255, 255.255.0, or 255.0.0.

           FSPF's definition generates routes to a Domain_ID,

           so the mask for all FSPF-generated routes is 255.0.0.

           The zero-length value has the same meaning as 0.0.0."

    ::= { t11FcRouteEntry 2 }

t11FcRouteSrcAddrId OBJECT-TYPE

    SYNTAX      FcAddressIdOrZero

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

           "The source Fibre Channel Address Identifier of this

           route.  Note that if this object and the corresponding

           instance of t11FcRouteSrcMask both have a value of 0.0.0,

           then this route matches all source addresses.  The

           zero-length value has the same meaning as 0.0.0."

    ::= { t11FcRouteEntry 3 }

t11FcRouteSrcMask OBJECT-TYPE

    SYNTAX      FcAddressIdOrZero

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

           "The mask to be logical-ANDed with a source

           Fibre Channel Address Identifier before it is compared

           to the value in the t11FcRouteSrcAddrId field.  Allowed

           values are 255.255.255, 255.255.0, 255.0.0, or 0.0.0.

           The zero-length value has the same meaning as 0.0.0."

    ::= { t11FcRouteEntry 4 }

t11FcRouteInInterface OBJECT-TYPE

    SYNTAX      InterfaceIndexOrZero

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

           "If the value of this object is non-zero, it is the

           value of ifIndex that identifies the local

           Fibre Channel interface through which a frame

           must have been received in order to match with

           this entry.  If the value of this object is zero,

           the matching does not require that the frame be

           received on any specific interface."

    ::= { t11FcRouteEntry 5 }

t11FcRouteProto OBJECT-TYPE

    SYNTAX   INTEGER {

                 other(1),

                 local(2),

                 netmgmt(3),

                 fspf(4)

              }

    MAX-ACCESS not-accessible

    STATUS   current

    DESCRIPTION

           "The mechanism via which this route was learned:

                other(1)  - not specified

                local(2)  - local interface

                netmgmt(3)- static route

                fspf(4)   - Fibre Shortest Path First

           "

    ::= { t11FcRouteEntry 6 }

t11FcRouteOutInterface OBJECT-TYPE

    SYNTAX      InterfaceIndex

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

           "The value of ifIndex that identifies the local

           Fibre Channel interface through which the next hop

           of this route is to be reached."

    ::= { t11FcRouteEntry 7 }

t11FcRouteDomainId OBJECT-TYPE

    SYNTAX      FcDomainIdOrZero

    MAX-ACCESS  read-create

    STATUS      current

    DESCRIPTION

           "The domain_ID of next hop switch.

           This object can have a value of zero if the value

           of t11FcRouteProto is 'local'."

    ::= { t11FcRouteEntry 8 }

t11FcRouteMetric OBJECT-TYPE

    SYNTAX      Unsigned32 (0..65536)

    MAX-ACCESS  read-create

    STATUS      current

    DESCRIPTION

           "The routing metric for this route.

           The use of this object is dependent on t11FcRouteProto."

    ::= { t11FcRouteEntry 9 }

t11FcRouteType OBJECT-TYPE

    SYNTAX      INTEGER {

                    local(1),

                    remote(2)

                }

    MAX-ACCESS  read-create

    STATUS      current

    DESCRIPTION

           "The type of route.

           local(1)  - a route for which the next Fibre Channel

                       port is the final destination;

           remote(2) - a route for which the next Fibre Channel

                      port is not the final destination."

    DEFVAL {local}

    ::= { t11FcRouteEntry 10 }

t11FcRouteIfDown OBJECT-TYPE

    SYNTAX      INTEGER {

                    remove(1),

                    retain(2)

                }

    MAX-ACCESS  read-create

    STATUS      current

    DESCRIPTION

           "The value of this object indicates what happens to

           this route when the output interface (given by the

           corresponding value of t11FcRouteOutInterface) is

           operationally 'down'.  If this object's value is 'retain',

           the route is to be retained in this table.  If this

           object's value is 'remove', the route is to be removed

           from this table."

    DEFVAL  { retain }

    ::= { t11FcRouteEntry 11 }

t11FcRouteStorageType OBJECT-TYPE

    SYNTAX      StorageType

    MAX-ACCESS  read-create

    STATUS      current

    DESCRIPTION

           "The storage type for this conceptual row.

           Conceptual rows having the value 'permanent' need not

           allow write-access to any columnar objects in the row."

       DEFVAL { nonVolatile }

    ::= { t11FcRouteEntry 12 }

t11FcRouteRowStatus OBJECT-TYPE

    SYNTAX      RowStatus

    MAX-ACCESS  read-create

    STATUS      current

    DESCRIPTION

           "The status of this conceptual row.

           The only rows that can be deleted by setting this object to

           'destroy' are those for which t11FcRouteProto has the value

           'netmgmt'."

    ::= { t11FcRouteEntry 13 }

--

-- Conformance

--

t11FcRouteCompliances OBJECT IDENTIFIER

                         ::= { t11FcRouteConformance 1 }

t11FcRouteGroups      OBJECT IDENTIFIER

                         ::= { t11FcRouteConformance 2 }

t11FcRouteCompliance  MODULE-COMPLIANCE

    STATUS    current

    DESCRIPTION

           "The compliance statement for entities that

           implement the T11-FC-ROUTE-MIB.

--

-- Note: The next four OBJECT clauses are for auxiliary objects, and the

-- SMIv2 does not permit inclusion of objects that are not accessible

-- in an OBJECT clause (see Sections 3.1 & 5.4.3 in STD 58, RFC 2580).

-- Thus, these four clauses cannot be included below in the normal

-- location for OBJECT clauses.

--

--      OBJECT     t11FcRouteSrcAddrId

--      SYNTAX     FcAddressIdOrZero (SIZE (0))

--      DESCRIPTION

--             'Support is not required for routes that

--             match only a subset of possible source

--             addresses.'

--

--      OBJECT     t11FcRouteSrcMask

--      SYNTAX     FcAddressIdOrZero (SIZE (0))

--      DESCRIPTION

--             'Support is not required for routes that

--             match only a subset of possible source

--             addresses.'

--

--      OBJECT     t11FcRouteDestMask

--      DESCRIPTION

--             'Support is mandatory only for FSPF-generated

--             routes.  Since FSPF's definition generates

--             routes to a Domain_ID, the mask for all

--             FSPF-generated routes is 255.0.0.  Thus,

--             support is only required for 255.0.0.'

--

--      OBJECT     t11FcRouteInInterface

--      SYNTAX     InterfaceIndexOrZero (0)

--      DESCRIPTION

--             'Support for routes specific to particular

--             source interfaces is not required.'

          "

    MODULE  -- this module

        MANDATORY-GROUPS { t11FcRouteGroup }

        OBJECT     t11FcRouteIfDown

        MIN-ACCESS read-only

        DESCRIPTION

               "Write access is not required."

        OBJECT     t11FcRouteDomainId

        MIN-ACCESS read-only

        DESCRIPTION

               "Write access is not required."

        OBJECT     t11FcRouteMetric

        MIN-ACCESS read-only

        DESCRIPTION

               "Write access is not required."

        OBJECT     t11FcRouteType

        MIN-ACCESS read-only

        DESCRIPTION

               "Write access is not required."

        OBJECT     t11FcRouteStorageType

        MIN-ACCESS read-only

        DESCRIPTION

               "Write access is not required."

        OBJECT     t11FcRouteRowStatus

        SYNTAX     INTEGER { active(1) }

        MIN-ACCESS read-only

        DESCRIPTION

               "Write access is not required."

    ::= { t11FcRouteCompliances 1 }

t11FcRouteGroup  OBJECT-GROUP

    OBJECTS  { t11FcRouteFabricLastChange,

               t11FcRouteDomainId,

               t11FcRouteMetric,

               t11FcRouteType,

               t11FcRouteIfDown,

               t11FcRouteStorageType,

               t11FcRouteRowStatus

             }

    STATUS   current

    DESCRIPTION

           "A collection of objects for displaying and configuring

           routes."

    ::= { t11FcRouteGroups 1 }

END