T11-FC-FABRIC-CONFIG-SERVER-MIB  DEFINITIONS ::= BEGIN

IMPORTS

    MODULE-IDENTITY, OBJECT-TYPE,

    NOTIFICATION-TYPE, mib-2, Counter32, Unsigned32

                  FROM SNMPv2-SMI                  -- [RFC2578]

    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP

                  FROM SNMPv2-CONF                 -- [RFC2580]

    TEXTUAL-CONVENTION, TruthValue, TimeStamp

                  FROM SNMPv2-TC                   -- [RFC2579]

    SnmpAdminString

                  FROM SNMP-FRAMEWORK-MIB          -- [RFC3411]

    URLString

                  FROM NETWORK-SERVICES-MIB        -- [RFC2788]

    FcPortType, FcNameIdOrZero, FcDomainIdOrZero,

    fcmInstanceIndex, fcmSwitchIndex, FcAddressIdOrZero

                  FROM FC-MGMT-MIB                 -- [RFC4044]

    T11NsGs4RejectReasonCode

                  FROM T11-FC-NAME-SERVER-MIB      -- [RFC4438]

    T11FabricIndex

                  FROM T11-TC-MIB                  -- [RFC4439]

    t11FamLocalSwitchWwn

                  FROM T11-FC-FABRIC-ADDR-MGR-MIB; -- [RFC4439]

t11FcFabricConfigServerMIB   MODULE-IDENTITY

    LAST-UPDATED  "200706270000Z"

    ORGANIZATION  "For the initial versions, T11.

                   For later versions, the IETF's IMSS Working Group."

    CONTACT-INFO

             "     Claudio DeSanti

                   Cisco Systems, Inc.

                   170 West Tasman Drive

                   San Jose, CA 95134 USA

                   EMail: cds@cisco.com

                   Keith McCloghrie

                   Cisco Systems, Inc.

                   170 West Tasman Drive

                   San Jose, CA 95134 USA

                   EMail: kzm@cisco.com"

    DESCRIPTION

            "The MIB module for the management of a Fabric

            Configuration Server (FCS) in a Fibre Channel (FC)

            network.  An FCS is defined by the FC-GS-5 standard.  This

            MIB provides the capabilities to trigger a discovery of

            the configuration of one or more Fabrics, to retrieve the

            results of such a discovery, as well as to control and

            monitor the operation of an FCS.  The discovered

            configuration contains information about:

               - Interconnect Elements (IEs), i.e., switches, hubs,

                 bridges, etc.,

               - Ports on IEs, and

               - Platforms that consist of one or more FC nodes.

           Copyright (C) The IETF Trust (2007).  This version of

           this MIB module is part of RFC 4935;  see the RFC itself for

           full legal notices."

    REVISION    "200706270000Z"

    DESCRIPTION

           "Initial version of this MIB module, published as RFC 4935."

    ::= { mib-2 162 }

t11FcsMIBObjects       OBJECT IDENTIFIER

                                    ::= { t11FcFabricConfigServerMIB 1 }

t11FcsMIBConformance   OBJECT IDENTIFIER

                                    ::= { t11FcFabricConfigServerMIB 2 }

t11FcsNotifications    OBJECT IDENTIFIER

                                    ::= { t11FcFabricConfigServerMIB 0 }

t11FcsDiscovery        OBJECT IDENTIFIER ::= { t11FcsMIBObjects 1 }

t11FcsDiscoveredConfig OBJECT IDENTIFIER ::= { t11FcsMIBObjects 2 }

t11FcsStats            OBJECT IDENTIFIER ::= { t11FcsMIBObjects 3 }

t11FcsNotificationInfo OBJECT IDENTIFIER ::= { t11FcsMIBObjects 4 }

--

-- Textual Conventions

--

T11FcListIndex ::= TEXTUAL-CONVENTION

    DISPLAY-HINT  "d"

    STATUS  current

    DESCRIPTION

            "An index that identifies a list of elements.

            All elements that belong to the same list have the

            same index value.  This syntax is used for objects

            which identify a list in the INDEX clause of a table

            of elements of that type of list."

    SYNTAX  Unsigned32 (1..4294967295)

T11FcListIndexPointerOrZero ::= TEXTUAL-CONVENTION

    DISPLAY-HINT  "d"

    STATUS  current

    DESCRIPTION

            "Objects with this syntax point to a list of elements

            contained in a table, by holding the same value as the

            object with syntax T11FcListIndex defined in the table's

            INDEX clause, or, zero to indicate an empty list.

            Note that such a table could have one row per list, or

            it could have one row per element of a list.

            The definition of an object with this syntax must

            identify the table(s) into which it points."

    SYNTAX  Unsigned32 -- the default range of (0..4294967295)

T11FcIeType ::= TEXTUAL-CONVENTION

    STATUS  current

    DESCRIPTION

            "The type of Interconnect Element (IE):

                     unknown(1)  - an unknown IE.

                     other(2)    - some other type of IE.

                     switch(3)   - the IE is a switch.

                     hub(4)      - the IE is a hub.

                     bridge(5)   - the IE is a bridge."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, Table 96."

    SYNTAX  INTEGER {

                unknown(1),

                other(2),

                switch(3),

                hub(4),

                bridge(5)

            }

T11FcPortState  ::= TEXTUAL-CONVENTION

    STATUS  current

    DESCRIPTION

            "The state of a port:

                     unknown(1)  - unknown state.

                     other(2)    - some other state.

                     online(3)   - port is in online state.

                     offline(4)  - port is in offline state.

                     testing(5)  - port is in testing state.

                     fault(6)    - port is faulty."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, Table 106."

    SYNTAX  INTEGER {

                unknown(1),

                other(2),

                online(3),

                offline(4),

                testing(5),

                fault(6)

            }

T11FcPortTxType ::= TEXTUAL-CONVENTION

    STATUS  current

    DESCRIPTION

            "The technology of the port transceiver:

               unknown(1)         - unknown (includes the 'null' type)

               other(2)           - some other technology

               shortwave850nm(3)  - Short wave laser - SN (850 nm)

               longwave1550nm(4)  - Long wave laser - LL (1550 nm)

               longwave1310nm(5)  - Long wave laser cost

                                    reduced - LC (1310 nm)

               electrical(6)      - Electrical - EL.

               tenGbaseSr850(7)   - 10GBASE-SR 850nm laser

               tenGbaseLr1310(8)  - 10GBASE-LR 1310nm laser

               tenGbaseEr1550(9)  - 10GBASE-ER 1550nm laser

               tenGbaseLx1300(10) - 10GBASE-LX4 WWDM 1300nm laser

               tenGbaseSw850(11)  - 10GBASE-SW 850nm laser

               tenGbaseLw1310(12) - 10GBASE-LW 1310nm laser

               tenGbaseEw1550(13) - 10GBASE-EW 1550nm laser

            "

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, Table 101."

    SYNTAX  INTEGER {

                unknown(1),

                other(2),

                shortwave850nm(3),

                longwave1550nm(4),

                longwave1310nm(5),

                electrical(6),

                tenGbaseSr850(7),

                tenGbaseLr1310(8),

                tenGbaseEr1550(9),

                tenGbaseLx1300(10),

                tenGbaseSw850(11),

                tenGbaseLw1310(12),

                tenGbaseEw1550(13)

            }

T11FcsRejectReasonExplanation ::= TEXTUAL-CONVENTION

    STATUS  current

    DESCRIPTION

            "The reject reason code explanation:

                  noAdditionalExplanation(1)

                       - no additional explanation.

                  invNameIdForIEOrPort(2)

                       - the format of IE or port name is invalid.

                  ieListNotAvailable(3)

                       - IE list is not available.

                  ieTypeNotAvailable(4)

                       - IE type is not available.

                  domainIdNotAvailable(5)

                       - Domain ID is not available.

                  mgmtIdNotAvailable(6)

                       - mgmt ID is not available.

                  fabNameNotAvailable(7)

                       - Fabric_Name is not available.

                  ielogNameNotAvailable(8)

                       - IE logical name is not available.

                  mgmtAddrListNotAvailable(9)

                       - mgmt address list is not available.

                  ieInfoListNotAvailable(10)

                       - IE info list is not available.

                  portListNotAvailable(11)

                       - port list is not available.

                  portTypeNotAvailable(12)

                       - port type is not available.

                  phyPortNumNotAvailable(13)

                       - physical port number is not available.

                  attPortNameListNotAvailable(14)

                       - attached port name list is not available.

                  portStateNotAvailable(15)

                       - port state is not available.

                  unableToRegIELogName(16)

                       - not able to register IE logical name.

                  platformNameNoExist(17)

                       - platform name does not exist.

                  platformNameAlreadyExists(18)

                       - platform name already exists.

                  platformNodeNameNoExists(19)

                       - platform node name does not exist.

                  platformNodeNameAlreadyExists(20)

                       - platform node name already exists.

                  resourceUnavailable(21)

                       - resource unavailable.

                  noEntriesInLunMap(22)

                       - zero entries in OS LUN Map.

                  invalidDeviceNameLength(23)

                       - invalid OS device name length.

                  multipleAttributes(24)

                       - multiple attributes of same type in

                         platform attribute block.

                  invalidAttribBlockLength(25)

                       - invalid platform attribute block length.

                  attributesMissing(26)

                       - required platform attributes not present."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, Table 124."

    SYNTAX  INTEGER {

                noAdditionalExplanation(1),

                invNameIdForIEOrPort(2),

                ieListNotAvailable(3),

                ieTypeNotAvailable(4),

                domainIdNotAvailable(5),

                mgmtIdNotAvailable(6),

                fabNameNotAvailable(7),

                ielogNameNotAvailable(8),

                mgmtAddrListNotAvailable(9),

                ieInfoListNotAvailable(10),

                portListNotAvailable(11),

                portTypeNotAvailable(12),

                phyPortNumNotAvailable(13),

                attPortNameListNotAvailable(14),

                portStateNotAvailable(15),

                unableToRegIELogName(16),

                platformNameNoExist(17),

                platformNameAlreadyExists(18),

                platformNodeNameNoExists(19),

                platformNodeNameAlreadyExists(20),

                resourceUnavailable(21),

                noEntriesInLunMap(22),

                invalidDeviceNameLength(23),

                multipleAttributes(24),

                invalidAttribBlockLength(25),

                attributesMissing(26)

            }

--

-- Objects for Fabric Discovery

--

t11FcsFabricDiscoveryTable OBJECT-TYPE

    SYNTAX       SEQUENCE OF T11FcsFabricDiscoveryEntry

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "This table contains control information for discovery

            of Fabric configuration by switches.

            Values written to objects in this table are not

            retained over agent reboots."

    ::= { t11FcsDiscovery 1 }

t11FcsFabricDiscoveryEntry OBJECT-TYPE

    SYNTAX       T11FcsFabricDiscoveryEntry

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "Control information for discovery by the switch

            identified by fcmInstanceIndex and fcmSwitchIndex."

    INDEX   { fcmInstanceIndex, fcmSwitchIndex }

    ::= { t11FcsFabricDiscoveryTable 1 }

T11FcsFabricDiscoveryEntry ::= SEQUENCE {

    t11FcsFabricDiscoveryRangeLow   T11FabricIndex,

    t11FcsFabricDiscoveryRangeHigh  T11FabricIndex,

    t11FcsFabricDiscoveryStart      INTEGER,

    t11FcsFabricDiscoveryTimeOut    Unsigned32

}

t11FcsFabricDiscoveryRangeLow  OBJECT-TYPE

    SYNTAX       T11FabricIndex

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

            "The discovery by a particular switch operates

            within all existing Fabrics that have a Fabric

            Index within a specific inclusive range.  This

            object specifies the minimum Fabric Index value

            within that range.  This value just represents

            the lower end of the range and does not necessarily

            represent any existing Fabric."

    ::= { t11FcsFabricDiscoveryEntry 1 }

t11FcsFabricDiscoveryRangeHigh  OBJECT-TYPE

    SYNTAX       T11FabricIndex

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

            "The discovery by a particular switch operates

            within all existing Fabrics that have a Fabric

            Index within a specific inclusive range.  This

            object specifies the maximum Fabric Index value

            within that range.  This value just represents the

            higher end of the range and does not necessarily

            represent any existing Fabric."

    ::= { t11FcsFabricDiscoveryEntry 2 }

t11FcsFabricDiscoveryStart  OBJECT-TYPE

    SYNTAX       INTEGER {

                     start(1),

                     noOp(2)

                 }

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

            "This object provides the capability to trigger the start

            of a discovery by a Fabric Configuration Server.  If this

            object is set to 'start', then the discovery is started on

            those Fabrics that have their Fabric Index value in the

            range specified by t11FcsFabricDiscoveryRangeLow and

            t11FcsFabricDiscoveryRangeHigh.  It is recommended that

            whenever an instance of this object is set to 'start',

            that the desired range be specified at the same time by

            setting the corresponding instances of

            t11FcsFabricDiscoveryRangeLow and

            t11FcsFabricDiscoveryRangeHigh.

            Setting this object to 'start' will be rejected if a

            discovery is already/still in progress on any Fabrics in

            the specified range.

            No action is taken if this object is set to 'noOp'.

            The value of this object when read is always 'noOp'."

    ::= { t11FcsFabricDiscoveryEntry 3 }

t11FcsFabricDiscoveryTimeOut OBJECT-TYPE

    SYNTAX       Unsigned32 (300..86400)

    UNITS        "Seconds"

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

            "The minimum interval of time for which the discovered

            Fabric information is cached by a Fabric Configuration

            Server."

    DEFVAL { 900 }

    ::= { t11FcsFabricDiscoveryEntry 4 }

--

-- Discovery State table

--

t11FcsDiscoveryStateTable OBJECT-TYPE

    SYNTAX       SEQUENCE OF T11FcsDiscoveryStateEntry

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "This table contains the status of discovery of

            locally known Fabrics."

    ::= { t11FcsDiscovery 2 }

t11FcsDiscoveryStateEntry OBJECT-TYPE

    SYNTAX       T11FcsDiscoveryStateEntry

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "The discovery status for a particular Fabric on the

            switch identified by fcmInstanceIndex and fcmSwitchIndex."

    INDEX   { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex }

    ::= { t11FcsDiscoveryStateTable 1 }

T11FcsDiscoveryStateEntry ::= SEQUENCE {

    t11FcsFabricIndex              T11FabricIndex,

    t11FcsDiscoveryStatus          INTEGER,

    t11FcsDiscoveryCompleteTime    TimeStamp

}

t11FcsFabricIndex OBJECT-TYPE

    SYNTAX       T11FabricIndex

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "A unique index value that uniquely identifies a

            particular Fabric.

            In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics

            can operate within one (or more) physical infrastructures,

            and this index value is used to uniquely identify a

            particular (physical or virtual) Fabric within a physical

            infrastructure.

            In a Fabric conformant to versions earlier than FC-SW-4,

            only a single Fabric could operate within a physical

            infrastructure, and thus, the value of this Fabric Index

            was defined to always be 1."

    ::= { t11FcsDiscoveryStateEntry 1 }

t11FcsDiscoveryStatus  OBJECT-TYPE

    SYNTAX       INTEGER {

                     inProgress(1),

                     completed(2),

                     localOnly(3)

                 }

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

            "The status of the discovery for the particular Fabric.

            Initially when the switch comes up, all instances of this

            object have the value: 'localOnly', and the database

            contains only local information, i.e., no information

            discovered via the Fabric Configuration Server protocol

            specified in FC-GS-5.

            If t11FcsFabricDiscoveryStart is set to 'start' for a

            range of Fabrics that includes this Fabric, then the

            value of this object transitions to 'inProgress'.  When

            the discovery completes, this object transitions to

            'completed', and the data is cached for the minimum

            interval of time specified by

            t11FcsFabricDiscoveryTimeOut.  After this interval has

            been exceeded, the data may be lost, in which case, the

            value of this object changes to 'localOnly'.

            This object cannot be set via SNMP to any value other

            than 'localOnly'.  If this object is set (via SNMP) to

            'localOnly', the cached data for the Fabric is discarded

            immediately, and if a discovery initiated from this

            switch was in progress for this Fabric, then that

            discovery is aborted."

    ::= { t11FcsDiscoveryStateEntry 2 }

t11FcsDiscoveryCompleteTime  OBJECT-TYPE

    SYNTAX       TimeStamp

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "This object contains the value of sysUpTime at which

            discovery was most recently completed or aborted on this

            Fabric.  This object contains the value of zero before

            the first discovery on this Fabric."

    ::= { t11FcsDiscoveryStateEntry 3 }

--

--      The Database of Fabric Configuration Information

--

-- Interconnect Element table

--

t11FcsIeTable OBJECT-TYPE

    SYNTAX       SEQUENCE OF T11FcsIeEntry

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "A table of Interconnect Elements.  Interconnect

            Elements (IEs) are switches, hubs, bridges etc.

            By default, the Fabric Configuration Server will

            maintain detailed information pertaining only to

            local resources.  As far as discovered topology is

            concerned, only the IE name, type, and Domain ID

            information will be maintained.  If a discovery

            cycle is triggered on a set of Fabrics, this table

            along with the Port and Platform tables will be

            populated with the discovered information.  The

            discovered data will be retained in this table for

            at least t11FcsFabricDiscoveryTimeOut seconds after

            the completion of its discovery or until the

            discovered data is invalidated."

    ::= { t11FcsDiscoveredConfig 1 }

t11FcsIeEntry OBJECT-TYPE

    SYNTAX       T11FcsIeEntry

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "Information about an Interconnect Element that was

            discovered on a Fabric (identified by t11FcsFabricIndex),

            by a switch (identified by fcmInstanceIndex and

            fcmSwitchIndex)."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.2."

    INDEX   { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex,

              t11FcsIeName }

    ::= { t11FcsIeTable 1 }

T11FcsIeEntry ::= SEQUENCE {

    t11FcsIeName                FcNameIdOrZero,

    t11FcsIeType                T11FcIeType,

    t11FcsIeDomainId            FcDomainIdOrZero,

    t11FcsIeMgmtId              FcAddressIdOrZero,

    t11FcsIeFabricName          FcNameIdOrZero,

    t11FcsIeLogicalName         OCTET STRING,

    t11FcsIeMgmtAddrListIndex   T11FcListIndexPointerOrZero,

    t11FcsIeInfoList            OCTET STRING

}

t11FcsIeName  OBJECT-TYPE

    SYNTAX       FcNameIdOrZero (SIZE(8 | 16))

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "The WWN of an Interconnect Element.  This object

            uniquely identifies an Interconnect Element on a

            Fabric.  If the IE is a switch, then this object

            is the Switch_Name (WWN) of the switch."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.2.1."

    ::= { t11FcsIeEntry 1 }

t11FcsIeType  OBJECT-TYPE

    SYNTAX       T11FcIeType

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The type of this Interconnect Element."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.2.2"

    ::= { t11FcsIeEntry 2 }

t11FcsIeDomainId  OBJECT-TYPE

    SYNTAX       FcDomainIdOrZero

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The Domain ID of this Interconnect Element."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.2.3."

    ::= { t11FcsIeEntry 3 }

t11FcsIeMgmtId  OBJECT-TYPE

    SYNTAX       FcAddressIdOrZero

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The management identifier of this Interconnect Element.

            If the Interconnect Element is a switch, this object will

            be the Domain Controller identifier of the switch.  When

            the value of the identifier is unknown, this object

            contains the all-zeros value: x'00 00 00'."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.2.4."

    DEFVAL { '000000'h }

    ::= { t11FcsIeEntry 4 }

t11FcsIeFabricName  OBJECT-TYPE

    SYNTAX       FcNameIdOrZero (SIZE(8 | 16))

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The Fabric_Name (WWN) of this Interconnect Element.

            When the Fabric_Name is unknown, this object contains

            the all-zeros value: x'00 00 00 00 00 00 00 00'."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.2.5."

    DEFVAL { '0000000000000000'h }

    ::= { t11FcsIeEntry 5 }

t11FcsIeLogicalName  OBJECT-TYPE

    SYNTAX       OCTET STRING (SIZE (0..255))

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The logical name of this Interconnect Element.

            When the logical name is unknown, this object contains

            the zero-length string."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.2.6."

    ::= { t11FcsIeEntry 6 }

t11FcsIeMgmtAddrListIndex  OBJECT-TYPE

    SYNTAX       T11FcListIndexPointerOrZero

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The management address list for this Interconnect Element.

            This object points to an entry in the

            t11FcsMgmtAddrListTable."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.2.7."

    ::= { t11FcsIeEntry 7 }

t11FcsIeInfoList  OBJECT-TYPE

    SYNTAX       OCTET STRING (SIZE (0..252))

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The information list for this Interconnect Element.

            The value of this object is formatted as specified in

            FC-GS-5, i.e., it has the following substrings in order:

            vendor name, model name/number, and release code/level,

            followed by zero or more substrings of vendor-specific

            information.  Each substring is terminated with a byte

            containing a null value (x'00')."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.2.8"

    ::= { t11FcsIeEntry 8 }

--

-- Management Address List table

--

t11FcsMgmtAddrListTable  OBJECT-TYPE

    SYNTAX       SEQUENCE OF T11FcsMgmtAddrListEntry

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "This table contains the set of management address lists

            that are currently referenced by any instance of the

            t11FcsIeMgmtAddrListIndex or

            t11FcsPlatformMgmtAddrListIndex objects."

    ::= { t11FcsDiscoveredConfig 2 }

t11FcsMgmtAddrListEntry  OBJECT-TYPE

    SYNTAX       T11FcsMgmtAddrListEntry

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "Information about one management address in a

            management address list, which is known to a

            switch (identified by fcmInstanceIndex and

            fcmSwitchIndex)."

    INDEX   { fcmInstanceIndex, fcmSwitchIndex,

              t11FcsMgmtAddrListIndex, t11FcsMgmtAddrIndex }

    ::= { t11FcsMgmtAddrListTable 1 }

T11FcsMgmtAddrListEntry ::= SEQUENCE {

    t11FcsMgmtAddrListIndex        T11FcListIndex,

    t11FcsMgmtAddrIndex            Unsigned32,

    t11FcsMgmtAddr                 URLString

}

t11FcsMgmtAddrListIndex  OBJECT-TYPE

    SYNTAX       T11FcListIndex

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "The index value of the management address list."

    ::= { t11FcsMgmtAddrListEntry 1 }

t11FcsMgmtAddrIndex OBJECT-TYPE

    SYNTAX       Unsigned32 (1..4294967295)

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "An integer value to distinguish different

            management addresses in the same list."

    ::= { t11FcsMgmtAddrListEntry 2 }

t11FcsMgmtAddr  OBJECT-TYPE

    SYNTAX       URLString

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The management address of this entry.

            The format of this object is a Uniform Resource

            Locator (URL), e.g., for SNMP, see RFC 4088."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.2.7"

    ::= { t11FcsMgmtAddrListEntry 3 }

--

-- Ports

--

t11FcsPortTable  OBJECT-TYPE

    SYNTAX       SEQUENCE OF T11FcsPortEntry

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "This table contains information about the ports of IEs."

    ::= { t11FcsDiscoveredConfig 4 }

t11FcsPortEntry  OBJECT-TYPE

    SYNTAX       T11FcsPortEntry

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "Information about a particular port of an Interconnect

            Element (identified by t11FcsIeName).  The port is

            connected to a Fabric (identified by t11FcsFabricIndex)

            and known to a switch (identified by fcmInstanceIndex

            and fcmSwitchIndex)."

    INDEX   { fcmInstanceIndex, fcmSwitchIndex, t11FcsFabricIndex,

              t11FcsIeName, t11FcsPortName }

    ::= { t11FcsPortTable 1 }

T11FcsPortEntry ::= SEQUENCE {

    t11FcsPortName                    FcNameIdOrZero,

    t11FcsPortType                    FcPortType,

    t11FcsPortTxType                  T11FcPortTxType,

    t11FcsPortModuleType              Unsigned32,

    t11FcsPortPhyPortNum              Unsigned32,

    t11FcsPortAttachPortNameIndex     T11FcListIndexPointerOrZero,

    t11FcsPortState                   T11FcPortState,

    t11FcsPortSpeedCapab              OCTET STRING,

    t11FcsPortOperSpeed               OCTET STRING,

    t11FcsPortZoningEnfStatus         OCTET STRING

}

t11FcsPortName  OBJECT-TYPE

    SYNTAX       FcNameIdOrZero (SIZE(8 | 16))

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

            "The Port_Name (WWN) of the port for which this row

            contains information."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.3.1."

    ::= { t11FcsPortEntry 1 }

t11FcsPortType  OBJECT-TYPE

    SYNTAX       FcPortType

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The Port Type of this port."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.3.2."

    ::= { t11FcsPortEntry 2 }

t11FcsPortTxType  OBJECT-TYPE

    SYNTAX       T11FcPortTxType

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The Port TX Type of this port."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.3.3."

    ::= { t11FcsPortEntry 3 }

t11FcsPortModuleType  OBJECT-TYPE

    SYNTAX       Unsigned32 (0..255)

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The port module type of this port."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.3.4."

    ::= { t11FcsPortEntry 4 }

t11FcsPortPhyPortNum  OBJECT-TYPE

    SYNTAX       Unsigned32 -- the default range of (0..4294967295)

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The physical number for this port.  FC-GS-5 says that

            the contents of this field, which are carried in a field

            with a size of 4 bytes, are not to be restricted due to

            vendor-specific methods for numbering physical ports."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.3.5."

    ::= { t11FcsPortEntry 5 }

t11FcsPortAttachPortNameIndex  OBJECT-TYPE

    SYNTAX       T11FcListIndexPointerOrZero

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The attached port name list for this port.  This object

            points to an entry in the t11FcsAttachPortNameListTable."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.3.6."

    ::= { t11FcsPortEntry 6 }

t11FcsPortState  OBJECT-TYPE

    SYNTAX       T11FcPortState

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

            "The state of this port."

    REFERENCE

            "ANSI INCITS 427-2007, Fibre Channel - Generic Services 5,

            FC-GS-5, section 6.2.3.3.7."

    ::= { t11FcsPortEntry 7 }