RFC1316-MIB DEFINITIONS ::= BEGIN

        IMPORTS

                Counter, TimeTicks, Gauge

                        FROM RFC1155-SMI

                DisplayString, mib-2

                        FROM RFC1213-MIB

                OBJECT-TYPE

                        FROM RFC-1212;

-- this is the MIB module for character stream devices

char    OBJECT IDENTIFIER ::= { mib-2 19 }

-- Textual Conventions

    AutonomousType    ::= OBJECT IDENTIFIER

-- The object identifier is an independently extensible type

-- identification value.  It may, for example indicate a

-- particular sub-tree with further MIB definitions, or

-- define something like a protocol type or type of

-- hardware.

    InstancePointer   ::= OBJECT IDENTIFIER

-- The object identifier is a pointer to a specific instance

-- of a MIB object in this agent's implemented MIB.  By

-- convention, it is the first object in the conceptual row

-- for the instance.

-- the generic Character group

-- Implementation of this group is mandatory for all

-- systems that offer character ports

charNumber OBJECT-TYPE

    SYNTAX INTEGER

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The number of entries in charPortTable, regardless

        of their current state."

    ::= { char 1 }

-- the Character Port table

charPortTable OBJECT-TYPE

    SYNTAX SEQUENCE OF CharPortEntry

    ACCESS not-accessible

    STATUS mandatory

    DESCRIPTION

        "A list of port entries.  The number of entries is

        given by the value of charNumber."

    ::= { char 2 }

charPortEntry OBJECT-TYPE

    SYNTAX CharPortEntry

    ACCESS not-accessible

    STATUS mandatory

    DESCRIPTION

        "Status and parameter values for a character port."

    INDEX { charPortIndex }

    ::= { charPortTable 1 }

CharPortEntry ::=

    SEQUENCE {

        charPortIndex

            INTEGER,

        charPortName

            DisplayString,

        charPortType

            INTEGER,

        charPortHardware

            AutonomousType,

        charPortReset

            INTEGER,

        charPortAdminStatus

            INTEGER,

        charPortOperStatus

            INTEGER,

        charPortLastChange

            TimeTicks,

        charPortInFlowType

            INTEGER,

        charPortOutFlowType

            INTEGER,

        charPortInFlowState

            INTEGER,

        charPortOutFlowState

            INTEGER,

        charPortInCharacters

            Counter,

        charPortOutCharacters

            Counter,

        charPortAdminOrigin

            INTEGER,

        charPortSessionMaximum

            INTEGER,

        charPortSessionNumber

            Gauge,

        charPortSessionIndex

            INTEGER

    }

charPortIndex OBJECT-TYPE

    SYNTAX INTEGER

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "A unique value for each character port.  Its value

        ranges between 1 and the value of charNumber.  By

        convention and if possible, hardware port numbers

        come first, with a simple, direct mapping.  The

        value for each port must remain constant at least

        from one re-initialization of the network management

        agent to the next."

    ::= { charPortEntry 1 }

charPortName OBJECT-TYPE

    SYNTAX DisplayString (SIZE (0..32))

    ACCESS read-write

    STATUS mandatory

    DESCRIPTION

        "An administratively assigned name for the port,

        typically with some local significance."

    ::= { charPortEntry 2 }

charPortType OBJECT-TYPE

    SYNTAX INTEGER { physical(1), virtual(2) }

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The port's type, 'physical' if the port represents

        an external hardware connector, 'virtual' if it does

        not."

    ::= { charPortEntry 3 }

charPortHardware OBJECT-TYPE

    SYNTAX AutonomousType

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "A reference to hardware MIB definitions specific to

        a physical port's external connector.  For example,

        if the connector is RS-232, then the value of this

        object refers to a MIB sub-tree defining objects

        specific to RS-232.  If an agent is not configured

        to have such values, the agent returns the object

        identifier:

            nullHardware OBJECT IDENTIFIER ::= { 0 0 }

        "

    ::= { charPortEntry 4 }

charPortReset OBJECT-TYPE

    SYNTAX INTEGER { ready(1), execute(2) }

    ACCESS read-write

    STATUS mandatory

    DESCRIPTION

        "A control to force the port into a clean, initial

        state, both hardware and software, disconnecting all

        the port's existing sessions.  In response to a

        get-request or get-next-request, the agent always

        returns 'ready' as the value.  Setting the value to

        'execute' causes a reset."

    ::= { charPortEntry 5 }

charPortAdminStatus OBJECT-TYPE

    SYNTAX INTEGER { enabled(1), disabled(2), off(3),

                     maintenance(4) }

    ACCESS read-write

    STATUS mandatory

    DESCRIPTION

        "The port's desired state, independent of flow

        control.  'enabled' indicates that the port is

        allowed to pass characters and form new sessions.

        'disabled' indicates that the port is allowed to

        pass characters but not form new sessions.  'off'

        indicates that the port is not allowed to pass

        characters or have any sessions. 'maintenance'

        indicates a maintenance mode, exclusive of normal

        operation, such as running a test."

    ::= { charPortEntry 6 }

charPortOperStatus OBJECT-TYPE

    SYNTAX INTEGER { up(1), down(2),

                     maintenance(3), absent(4), active(5) }

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The port's actual, operational state, independent

        of flow control.  'up' indicates able to function

        normally.  'down' indicates inability to function

        for administrative or operational reasons.

        'maintenance' indicates a maintenance mode,

        exclusive of normal operation, such as running a

        test.  'absent' indicates that port hardware is not

        present.  'active' indicates up with a user present

        (e.g. logged in)."

    ::= { charPortEntry 7 }

charPortLastChange OBJECT-TYPE

    SYNTAX TimeTicks

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The value of sysUpTime at the time the port entered

        its current operational state.  If the current state

        was entered prior to the last reinitialization of

        the local network management subsystem, then this

        object contains a zero value."

    ::= { charPortEntry 8 }

charPortInFlowType OBJECT-TYPE

    SYNTAX INTEGER { none(1), xonXoff(2), hardware(3),

                     ctsRts(4), dsrDtr(5) }

    ACCESS read-write

    STATUS mandatory

    DESCRIPTION

        "The port's type of input flow control.  'none'

        indicates no flow control at this level or below.

        'xonXoff' indicates software flow control by

        recognizing XON and XOFF characters.  'hardware'

        indicates flow control delegated to the lower level,

        for example a parallel port.

        'ctsRts' and 'dsrDtr' are specific to RS-232-like

        ports.  Although not architecturally pure, they are

        included here for simplicity's sake."

    ::= { charPortEntry 9 }

charPortOutFlowType OBJECT-TYPE

    SYNTAX INTEGER { none(1), xonXoff(2), hardware(3),

                     ctsRts(4), dsrDtr(5) }

    ACCESS read-write

    STATUS mandatory

    DESCRIPTION

        "The port's type of output flow control.  'none'

        indicates no flow control at this level or below.

        'xonXoff' indicates software flow control by

        recognizing XON and XOFF characters.  'hardware'

        indicates flow control delegated to the lower level,

        for example a parallel port.

        'ctsRts' and 'dsrDtr' are specific to RS-232-like

        ports.  Although not architecturally pure, they are

        included here for simplicy's sake."

    ::= { charPortEntry 10 }

charPortInFlowState OBJECT-TYPE

    SYNTAX INTEGER { none(1), unknown(2), stop(3), go(4) }

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The current operational state of input flow control

        on the port.  'none' indicates not applicable.

        'unknown' indicates this level does not know.

        'stop' indicates flow not allowed.  'go' indicates

        flow allowed."

    ::= { charPortEntry 11 }

charPortOutFlowState OBJECT-TYPE

    SYNTAX INTEGER { none(1), unknown(2), stop(3), go(4) }

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The current operational state of output flow

        control on the port.  'none' indicates not

        applicable.  'unknown' indicates this level does not

        know.  'stop' indicates flow not allowed.  'go'

        indicates flow allowed."

    ::= { charPortEntry 12 }

charPortInCharacters OBJECT-TYPE

    SYNTAX Counter

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "Total number of characters detected as input from

        the port since system re-initialization and while

        the port operational state was 'up', 'active', or

        'maintenance', including, for example, framing, flow

        control (i.e. XON and XOFF), each occurrence of a

        BREAK condition, locally-processed input, and input

        sent to all sessions."

    ::= { charPortEntry 13 }

charPortOutCharacters OBJECT-TYPE

    SYNTAX Counter

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "Total number of characters detected as output to

        the port since system re-initialization and while

        the port operational state was 'up', 'active', or

        'maintenance', including, for example, framing, flow

        control (i.e. XON and XOFF), each occurrence of a

        BREAK condition, locally-created output, and output

        received from all sessions."

    ::= { charPortEntry 14 }

charPortAdminOrigin OBJECT-TYPE

    SYNTAX INTEGER { dynamic(1), network(2), local(3),

                     none(4) }

    ACCESS read-write

    STATUS mandatory

    DESCRIPTION

        "The administratively allowed origin for

        establishing session on the port.  'dynamic' allows

        'network' or 'local' session establishment. 'none'

        disallows session establishment."

    ::= { charPortEntry 15 }

charPortSessionMaximum OBJECT-TYPE

    SYNTAX INTEGER

    ACCESS read-write

    STATUS mandatory

    DESCRIPTION

        "The maximum number of concurrent sessions allowed

        on the port.  A value of -1 indicates no maximum.

        Setting the maximum to less than the current number

        of sessions has unspecified results."

    ::= { charPortEntry 16 }

charPortSessionNumber OBJECT-TYPE

    SYNTAX Gauge

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The number of open sessions on the port that are in

        the connecting, connected, or disconnecting state."

    ::= { charPortEntry 17 }

charPortSessionIndex OBJECT-TYPE

    SYNTAX INTEGER

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The value of charSessIndex for the port's first or

        only active session.  If the port has no active

        session, the agent returns the value zero."

    ::= { charPortEntry 18 }

-- the Character Session table

charSessTable OBJECT-TYPE

    SYNTAX SEQUENCE OF CharSessEntry

    ACCESS not-accessible

    STATUS mandatory

    DESCRIPTION

        "A list of port session entries."

    ::= { char 3 }

charSessEntry OBJECT-TYPE

    SYNTAX CharSessEntry

    ACCESS not-accessible

    STATUS mandatory

    DESCRIPTION

        "Status and parameter values for a character port

        session."

    INDEX { charSessPortIndex, charSessIndex }

    ::= { charSessTable 1 }

CharSessEntry ::=

    SEQUENCE {

        charSessPortIndex

            INTEGER,

        charSessIndex

            INTEGER,

        charSessKill

            INTEGER,

        charSessState

            INTEGER,

        charSessProtocol

            AutonomousType,

        charSessOperOrigin

            INTEGER,

        charSessInCharacters

            Counter,

        charSessOutCharacters

            Counter,

        charSessConnectionId

            InstancePointer,

        charSessStartTime

            TimeTicks

    }

charSessPortIndex OBJECT-TYPE

    SYNTAX INTEGER

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The value of charPortIndex for the port to which

        this session belongs."

    ::= { charSessEntry 1 }

charSessIndex OBJECT-TYPE

    SYNTAX INTEGER

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The session index in the context of the port, a

        non-zero positive integer.  Session indexes within a

        port need not be sequential.  Session indexes may be

        reused for different ports.  For example, port 1 and

        port 3 may both have a session 2 at the same time.

        Session indexes may have any valid integer value,

        with any meaning convenient to the agent

        implementation."

    ::= { charSessEntry 2 }

charSessKill OBJECT-TYPE

    SYNTAX INTEGER { ready(1), execute(2) }

    ACCESS read-write

    STATUS mandatory

    DESCRIPTION

        "A control to terminate the session.  In response to

        a get-request or get-next-request, the agent always

        returns 'ready' as the value.  Setting the value to

        'execute' causes termination."

    ::= { charSessEntry 3 }

charSessState OBJECT-TYPE

    SYNTAX INTEGER { connecting(1), connected(2),

                     disconnecting(3) }

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The current operational state of the session,

        disregarding flow control.  'connected' indicates

        that character data could flow on the network side

        of session.  'connecting' indicates moving from

        nonexistent toward 'connected'.  'disconnecting'

        indicates moving from 'connected' or 'connecting' to

        nonexistent."

    ::= { charSessEntry 4 }

charSessProtocol OBJECT-TYPE

    SYNTAX AutonomousType

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The network protocol over which the session is

        running.  Other OBJECT IDENTIFIER values may be

        defined elsewhere, in association with specific

        protocols.  However, this document assigns those of

        known interest as of this writing."

    ::= { charSessEntry 5 }

wellKnownProtocols OBJECT IDENTIFIER ::= { char 4 }

protocolOther  OBJECT IDENTIFIER ::= {wellKnownProtocols 1}

protocolTelnet OBJECT IDENTIFIER ::= {wellKnownProtocols 2}

protocolRlogin OBJECT IDENTIFIER ::= {wellKnownProtocols 3}

protocolLat    OBJECT IDENTIFIER ::= {wellKnownProtocols 4}

protocolX29    OBJECT IDENTIFIER ::= {wellKnownProtocols 5}

protocolVtp    OBJECT IDENTIFIER ::= {wellKnownProtocols 6}

charSessOperOrigin OBJECT-TYPE

    SYNTAX INTEGER { unknown(1), network(2), local(3) }

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The session's source of establishment."

    ::= { charSessEntry 6 }

charSessInCharacters OBJECT-TYPE

    SYNTAX Counter

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "This session's subset of charPortInCharacters."

    ::= { charSessEntry 7 }

charSessOutCharacters OBJECT-TYPE

    SYNTAX Counter

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "This session's subset of charPortOutCharacters."

    ::= { charSessEntry 8 }

charSessConnectionId OBJECT-TYPE

    SYNTAX InstancePointer

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "A reference to additional local MIB information.

        This should be the highest available related MIB,

        corresponding to charSessProtocol, such as Telnet.

        For example, the value for a TCP connection (in the

        absence of a Telnet MIB) is the object identifier of

        tcpConnState.  If an agent is not configured to have

        such values, the agent returns the object

        identifier:

            nullConnectionId OBJECT IDENTIFIER ::= { 0 0 }

        "

    ::= { charSessEntry 9 }

charSessStartTime OBJECT-TYPE

    SYNTAX TimeTicks

    ACCESS read-only

    STATUS mandatory

    DESCRIPTION

        "The value of sysUpTime in MIB-2 when the session

        entered connecting state."

    ::= { charSessEntry 10 }

END