RFC1285-MIB DEFINITIONS ::= BEGIN

IMPORTS

        Counter

            FROM RFC1155-SMI

        transmission

            FROM RFC1213-MIB

        OBJECT-TYPE

            FROM RFC-1212;

--  This MIB module uses the extended OBJECT-TYPE macro as

--  defined in [7].

-- this is the FDDI MIB module

fddi    OBJECT IDENTIFIER ::= { transmission 15 }

-- textual conventions

FddiTime ::= INTEGER (0..2147483647)

-- This data type specifies octet units of 80 nanoseconds as

-- an integer value.  It is used for Path Latency  and

-- Synchronous Bandwidth values.  The encoding is normal

-- integer representation (not twos complement).

FddiResourceId ::= INTEGER (0..65535)

-- This data type is used to refer to an instance of a  MAC,

-- PORT, PATH, or ATTACHMENT Resource ID.  Indexing begins

-- at 1.  Zero is used to indicate the absence of a resource.

FddiSMTStationIdType ::= OCTET STRING (SIZE (8))

-- The unique identifier for the FDDI station.  This is a

-- string of 8 octets, represented as

--                                X' yy yy xx xx xx xx xx xx'

-- with the low order 6 octet (xx) from a unique IEEE

-- assigned address.  The high order two bits of the IEEE

-- address, the group address bit and the administration bit

-- (Universal/Local) bit should both be zero.  The first two

-- octets, the yy octets, are implementor-defined.

--

-- The representation of the address portion of the station id

-- is in the IEEE (ANSI/IEEE P802.1A) canonical notation for

-- 48 bit addresses.  The canonical form is a 6-octet string

-- where the first octet contains the first 8 bits of the

-- address, with the I/G(Individual/Group) address bit as the

-- least significant bit and the  U/L (Universal/Local) bit

-- as the next more significant bit, and so on.  Note that

-- addresses in the ANSI FDDI standard SMT frames are

-- represented in FDDI MAC order.

FddiMACLongAddressType ::= OCTET STRING (SIZE (6))

-- The representation of long MAC addresses as management

-- values is in the IEEE (ANSI/IEEE P802.1A) canonical

-- notation for 48 bit addresses.  The canonical form is a

-- 6-octet string where the first octet contains the first 8

-- bits of the address, with the I/G (Individual/Group)

-- address bit as the least significant bit and the  U/L

-- (Universal/Local) bit as the next more significant bit,

-- and so on.  Note that the addresses in the SMT frames are

-- represented in FDDI MAC order.

-- groups in the FDDI MIB module

snmpFddiSMT        OBJECT IDENTIFIER ::= { fddi 1 }

snmpFddiMAC        OBJECT IDENTIFIER ::= { fddi 2 }

snmpFddiPATH       OBJECT IDENTIFIER ::= { fddi 3 }

snmpFddiPORT       OBJECT IDENTIFIER ::= { fddi 4 }

snmpFddiATTACHMENT OBJECT IDENTIFIER ::= { fddi 5 }

snmpFddiChipSets    OBJECT IDENTIFIER ::= { fddi 6 }

-- the SMT group

-- Implementation of the SMT group is mandatory for all

-- systems which implement manageable FDDI subsystems.

snmpFddiSMTNumber OBJECT-TYPE

    SYNTAX  INTEGER (0..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of SMT implementations (regardless of

            their current state) on this network management

            application entity.  The value for this variable

            must remain constant at least from one re-

            initialization of the entity's network management

            system to the next re-initialization."

    ::= { snmpFddiSMT  1 }

-- the SMT table

snmpFddiSMTTable OBJECT-TYPE

    SYNTAX  SEQUENCE OF SnmpFddiSMTEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "A list of SMT entries.  The number of entries is

            given by  the value of snmpFddiSMTNumber."

    ::= { snmpFddiSMT  2 }

snmpFddiSMTEntry OBJECT-TYPE

    SYNTAX  SnmpFddiSMTEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "An SMT entry containing information common to a

            given SMT."

    INDEX   { snmpFddiSMTIndex }

    ::= { snmpFddiSMTTable 1 }

SnmpFddiSMTEntry ::=

    SEQUENCE {

        snmpFddiSMTIndex

            INTEGER,

        snmpFddiSMTStationId

            FddiSMTStationIdType,

        snmpFddiSMTOpVersionId

            INTEGER,

        snmpFddiSMTHiVersionId

            INTEGER,

        snmpFddiSMTLoVersionId

            INTEGER,

        snmpFddiSMTMACCt

            INTEGER,

        snmpFddiSMTNonMasterCt

            INTEGER,

        snmpFddiSMTMasterCt

            INTEGER,

        snmpFddiSMTPathsAvailable

            INTEGER,

        snmpFddiSMTConfigCapabilities

            INTEGER,

        snmpFddiSMTConfigPolicy

            INTEGER,

        snmpFddiSMTConnectionPolicy

            INTEGER,

        snmpFddiSMTTNotify

            INTEGER,

        snmpFddiSMTStatusReporting

            INTEGER,

        snmpFddiSMTECMState

            INTEGER,

        snmpFddiSMTCFState

            INTEGER,

        snmpFddiSMTHoldState

            INTEGER,

        snmpFddiSMTRemoteDisconnectFlag

            INTEGER,

        snmpFddiSMTStationAction

            INTEGER

    }

snmpFddiSMTIndex OBJECT-TYPE

    SYNTAX  INTEGER (1..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "A unique value for each SMT.  Its value ranges

            between 1 and the value of snmpFddiSMTNumber.  The

            value for each SMT must remain constant at least

            from one re-initialization of the entity's network

            management system to the next re-initialization."

    ::= { snmpFddiSMTEntry 1 }

snmpFddiSMTStationId OBJECT-TYPE

    SYNTAX  FddiSMTStationIdType -- OCTET STRING (SIZE (8))

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "Uniquely identifies an FDDI station."

    REFERENCE

            "ANSI { fddiSMT 11 }"

    ::= { snmpFddiSMTEntry 2 }

snmpFddiSMTOpVersionId OBJECT-TYPE

    SYNTAX  INTEGER (1..65535)

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The version that this station is using for its

            operation (refer to ANSI 7.1.2.2)."

    REFERENCE

            "ANSI { fddiSMT 13 }"

    ::= { snmpFddiSMTEntry 3 }

snmpFddiSMTHiVersionId OBJECT-TYPE

    SYNTAX  INTEGER (1..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The highest version of SMT that this station

            supports (refer to ANSI 7.1.2.2)."

    REFERENCE

            "ANSI { fddiSMT 14 }"

    ::= { snmpFddiSMTEntry 4 }

snmpFddiSMTLoVersionId OBJECT-TYPE

    SYNTAX  INTEGER (1..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The lowest version of SMT that this station

            supports (refer to ANSI 7.1.2.2)."

    REFERENCE

            "ANSI { fddiSMT 15 }"

    ::= { snmpFddiSMTEntry 5 }

snmpFddiSMTMACCt OBJECT-TYPE

    SYNTAX  INTEGER (0..255)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of MACs in the station or

            concentrator."

    REFERENCE

            "ANSI { fddiSMT 21 }"

    ::= { snmpFddiSMTEntry 6 }

snmpFddiSMTNonMasterCt OBJECT-TYPE

    SYNTAX  INTEGER (0..2)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of Non Master PORTs (A, B, or S PORTs)

            in the station or concentrator."

    REFERENCE

            "ANSI { fddiSMT 22 }"

    ::= { snmpFddiSMTEntry 7 }

snmpFddiSMTMasterCt OBJECT-TYPE

    SYNTAX  INTEGER (0..255)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of Master PORTs in a node.  If the

            node is not a concentrator, the value is zero."

    REFERENCE

            "ANSI { fddiSMT 23 }"

    ::= { snmpFddiSMTEntry 8 }

snmpFddiSMTPathsAvailable OBJECT-TYPE

    SYNTAX  INTEGER (0..7)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "A value that indicates the PATH types available

            in the station.

            The value is a sum.  This value initially takes

            the value zero, then for each type of PATH that

            this node has available, 2 raised to a power is

            added to the sum.  The powers are according to the

            following table:

                     Path   Power

                  Primary   0

                Secondary   1

                    Local   2

            For example, a station having Primary and Local

            PATHs available would have a value of 5 (2**0 +

            2**2)."

    REFERENCE

            "ANSI { fddiSMT 24 }"

    ::= { snmpFddiSMTEntry 9 }

snmpFddiSMTConfigCapabilities OBJECT-TYPE

    SYNTAX  INTEGER (0..3)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "A value that indicates capabilities that are

            present in the node.  If 'holdAvailable' is

            present, this indicates support of the optional

            Hold Function (refer to ANSI SMT 9.4.3.2).  If

            'CF-Wrap-AB' is present, this indicates that the

            WRAP_AB state is forced.

            The value is a sum.  This value initially takes

            the value zero, then for each of the configuration

            policies currently enforced on the node, 2 raised

            to a power is added to the sum.  The powers are

            according to the following table:

                       Policy   Power

                holdAvailable   0

                   CF-Wrap-AB   1 "

    REFERENCE

            "ANSI { fddiSMT 25 }"

    ::= { snmpFddiSMTEntry 10 }

snmpFddiSMTConfigPolicy OBJECT-TYPE

    SYNTAX  INTEGER (0..3)

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "A value that indicates the configuration policies

            currently enforced in the node (refer to ANSI SMT

            9.4.3.2).  The 'configurationHold' policy refers

            to the Hold flag, and should not be present only

            if the Hold function is supported.  The 'CF-Wrap-

            AB' policy refers to the CF_Wrap_AB flag.

            The value is a sum.  This value initially takes

            the value zero, then for each of the configuration

            policies currently enforced on the node, 2 raised

            to a power is added to the sum.  The powers are

            according to the following table:

                           Policy   Power

                configurationHold   0

                       CF-Wrap-AB   1 "

    REFERENCE

            "ANSI { fddiSMT 26 }"

    ::= { snmpFddiSMTEntry 11 }

snmpFddiSMTConnectionPolicy OBJECT-TYPE

    SYNTAX  INTEGER (0..65535)

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "A value that indicates the connection policies

            enforced at the station.  A station sets the

            corresponding policy for each of the connection

            types that it rejects.  The letter designations, X

            and Y, in the 'rejectX-Y' names have the following

            significance:  X represents the PC-Type of the

            local PORT and Y represents a PC-Neighbor in the

            evaluation of Connection-Policy (PC-Type, PC-

            Neighbor) that is done to determine the setting of

            T-Val(3) in the PC-Signaling sequence (refer to

            ANSI Section 9.6.3).

            The value is a sum.  This value initially takes

            the value zero, then for each of the connection

            policies currently enforced on the node, 2 raised

            to a power is added to the sum.  The powers are

            according to the following table:

                   Policy   Power

                rejectA-A   0

                rejectA-B   1

                rejectA-S   2

                rejectA-M   3

                rejectB-A   4

                rejectB-B   5

                rejectB-S   6

                rejectB-M   7

                rejectS-A   8

                rejectS-B   9

                rejectS-S   10

                rejectS-M   11

                rejectM-A   12

                rejectM-B   13

                rejectM-S   14

                rejectM-M   15

            Implementors should note that the polarity of

            these bits is different in different places in an

            SMT system.  Implementors should take appropriate

            care."

    REFERENCE

            "ANSI { fddiSMT 27 }"

    ::= { snmpFddiSMTEntry 12 }

snmpFddiSMTTNotify OBJECT-TYPE

    SYNTAX  INTEGER (2..30)

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The timer used in the Neighbor Notification

            protocol, reported in seconds and ranging from 2

            to 30 seconds (refer to ANSI SMT 8.3.1)."

    REFERENCE

            "ANSI { fddiSMT 29 }"

    ::= { snmpFddiSMTEntry 13 }

snmpFddiSMTStatusReporting OBJECT-TYPE

    SYNTAX  INTEGER { true(1), false(2) }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "Indicates whether the node implements the Status

            Reporting Protocol.  This object is included for

            compatibility with products that were designed

            prior to the adoption of this standard."

    REFERENCE

            "ANSI { fddiSMT 30 }"

    ::= { snmpFddiSMTEntry 14 }

snmpFddiSMTECMState OBJECT-TYPE

    SYNTAX  INTEGER {

                ec0(1), -- Out

                ec1(2), -- In

                ec2(3), -- Trace

                ec3(4), -- Leave

                ec4(5), -- Path_Test

                ec5(6), -- Insert

                ec6(7), -- Check

                ec7(8)  -- Deinsert

            }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "Indicates the current state of the ECM state

            machine (refer to ANSI SMT 9.5.2)."

    REFERENCE

            "ANSI { fddiSMT 41 }"

    ::= { snmpFddiSMTEntry 15 }

snmpFddiSMTCFState OBJECT-TYPE

    SYNTAX  INTEGER {

                cf0(1), -- Isolated

                cf1(2), -- Wrap_S

                cf2(3), -- Wrap_A

                cf3(4), -- Wrap_B

                cf4(5), -- Wrap_AB

                cf5(6)  -- Thru

            }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The attachment configuration for the station or

            concentrator (refer to ANSI SMT 9.7.4.3)."

    REFERENCE

            "ANSI { fddiSMT 42 }"

    ::= { snmpFddiSMTEntry 16 }

snmpFddiSMTHoldState OBJECT-TYPE

    SYNTAX  INTEGER {

                not-implemented(1), -- holding not implemented

                not-holding(2),

                holding-prm(3),     -- holding on primary

                holding-sec(4)      -- holding on secondary

            }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "This value indicates the current state of the

            Hold function.  The values are determined as

            follows:  'holding-prm' is set if the primary ring

            is operational and the Recovery Enable Flag is

            clear (NOT NO_Flag(primary) AND NOT RE_Flag).  is

            set if the secondary ring is operational and the

            Recovery Enable Flag is clear (NOT

            NO_Flag(secondary) AND NOT RE_Flag).  Ref 9.4.3.

            and 10.3.1.  the primary or secondary, i.e., the

            Recovery Enable, RE_Flag, is set."

    REFERENCE

            "ANSI { fddiSMT 43 }"

    ::= { snmpFddiSMTEntry 17 }

snmpFddiSMTRemoteDisconnectFlag OBJECT-TYPE

    SYNTAX  INTEGER { true(1), false(2) }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "A flag indicating that the station was remotely

            disconnected from the network.  A station requires

            a Connect Action (SM_CM_CONNECT.request (Connect))

            to rejoin and clear the flag (refer to ANSI

            6.4.5.2)."

    REFERENCE

            "ANSI { fddiSMT 44 }"

    ::= { snmpFddiSMTEntry 18 }

snmpFddiSMTStationAction OBJECT-TYPE

    SYNTAX  INTEGER {

                other(1),           -- none of the following

                connect(2),

                disconnect(3),

                path-Test(4),

                self-Test(5)

            }

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "This object, when read, always returns a value of

            other(1).  The behavior of setting this variable

            to each of the acceptable values is as follows:

            Other:          Results in a badValue error.

            Connect:        Generates an

            SM_CM_Connect.request(connect) signal to CMT

            indicating that the ECM State machine is to begin

            a connection sequence.  The

            fddiSMTRemoteDisconnectFlag is cleared on the

            setting of this variable to 1.  See ANSI Ref

            9.3.1.1.

            Disconnect:     Generates an

            SM_CM_Connect.request(disconnect) signal to ECM

            and sets the fddiSMTRemoteDisconnectFlag.  See

            ANSI Ref 9.3.1.1.

            Path-Test:      Initiates a station path test.

            The Path_Test variable (See ANSI Ref. 9.4.1) is

            set to Testing.  The results of this action are

            not specified in this standard.

            Self-Test:      Initiates a station self test.

            The results of this action are not specified in

            this standard.

            Attempts to set this object to all other values

            results in a badValue error.  Agents may elect to

            return a badValue error on attempts to set this

            variable to path-Test(4) or self-Test(5)."

    REFERENCE

            "ANSI { fddiSMT 60 }"

    ::= { snmpFddiSMTEntry 19 }

-- the MAC group

-- Implementation of the MAC Group is mandatory for all

-- systems which implement manageable FDDI subsystems.

snmpFddiMACNumber OBJECT-TYPE

    SYNTAX  INTEGER (0..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The total number of MAC implementations (across

            all SMTs) on this network management application

            entity.  The value for this variable must remain

            constant at least from one re-initialization of

            the entity's network management system to the next

            re-initialization."

    ::= { snmpFddiMAC  1 }

-- the MAC table

snmpFddiMACTable OBJECT-TYPE

    SYNTAX  SEQUENCE OF SnmpFddiMACEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "A list of MAC entries.  The number of entries is

            given by the value of snmpFddiMACNumber."

    ::= { snmpFddiMAC  2 }

snmpFddiMACEntry OBJECT-TYPE

    SYNTAX  SnmpFddiMACEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "A MAC entry containing information common to a

            given MAC."

    INDEX   { snmpFddiMACSMTIndex, snmpFddiMACIndex }

    ::= { snmpFddiMACTable 1 }

SnmpFddiMACEntry ::=

    SEQUENCE {

        snmpFddiMACSMTIndex

                INTEGER,

        snmpFddiMACIndex

                INTEGER,

        snmpFddiMACFrameStatusCapabilities

                INTEGER,

        snmpFddiMACTMaxGreatestLowerBound

                FddiTime,

        snmpFddiMACTVXGreatestLowerBound

                FddiTime,

        snmpFddiMACPathsAvailable

                INTEGER,

        snmpFddiMACCurrentPath

                INTEGER,

        snmpFddiMACUpstreamNbr

                FddiMACLongAddressType,

        snmpFddiMACOldUpstreamNbr

                FddiMACLongAddressType,

        snmpFddiMACDupAddrTest

                INTEGER,

        snmpFddiMACPathsRequested

                INTEGER,

        snmpFddiMACDownstreamPORTType

                INTEGER,

        snmpFddiMACSMTAddress

                FddiMACLongAddressType,

        snmpFddiMACTReq

                FddiTime,

        snmpFddiMACTNeg

                FddiTime,

        snmpFddiMACTMax

                FddiTime,

        snmpFddiMACTvxValue

                FddiTime,

        snmpFddiMACTMin

                FddiTime,

        snmpFddiMACCurrentFrameStatus

                INTEGER,

        snmpFddiMACFrameCts

                Counter,

        snmpFddiMACErrorCts

                Counter,

        snmpFddiMACLostCts

                Counter,

        snmpFddiMACFrameErrorThreshold

                INTEGER,

        snmpFddiMACFrameErrorRatio

                INTEGER,

        snmpFddiMACRMTState

                INTEGER,

        snmpFddiMACDaFlag

                INTEGER,

        snmpFddiMACUnaDaFlag

                INTEGER,

        snmpFddiMACFrameCondition

                INTEGER,

        snmpFddiMACChipSet

                OBJECT IDENTIFIER,

        snmpFddiMACAction

                INTEGER

    }

snmpFddiMACSMTIndex OBJECT-TYPE

    SYNTAX  INTEGER (1..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The value of the SMT index associated with this

            MAC."

    ::= { snmpFddiMACEntry 1 }

snmpFddiMACIndex OBJECT-TYPE

    SYNTAX  INTEGER (1..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "A unique value for each MAC on the managed

            entity.  The MAC identified by a particular value

            of this index is that identified by the same value

            of an ifIndex object instance.  That is, if a MAC

            is associated with the interface whose value of

            ifIndex in the Internet-Standard MIB is equal to

            5, then the value of snmpFddiMACIndex shall also

            equal 5.  The value for each MAC must remain

            constant at least from one re-initialization of

            the entity's network management system to the next

            re-initialization."

    ::= { snmpFddiMACEntry 2 }

snmpFddiMACFrameStatusCapabilities OBJECT-TYPE

    SYNTAX  INTEGER (0..1799)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "A value that indicates the MAC's bridge and end-

            station capabilities for operating in a bridged

            FDDI network.

            The value is a sum.  This value initially takes

            the value zero, then for each capability present,

            2 raised to a power is added to the sum.  The

            powers are according to the following table:

                 Capability    Power

                 FSC-Type0    0

                 -- MAC repeats A/C indicators as received on

                 -- copying with the intent to forward.

                 FSC-Type1    1

                 -- MAC sets C but not A on copying for

                 -- forwarding.

                 FSC-Type2    2

                 -- MAC resets C and sets A on C set and

                 -- A reset if the frame is not copied and the

                 -- frame was addressed to this MAC

                 FSC-Type0-programmable    8

                 -- Type0 capability is programmable

                 FSC-Type1-programmable    9

                 -- Type1 capability is programmable

                 FSC-Type2-programmable   10

                 -- Type2 capability is programmable

            "

    REFERENCE

            "ANSI { fddiMAC 11 }"

    ::= { snmpFddiMACEntry 3 }

snmpFddiMACTMaxGreatestLowerBound OBJECT-TYPE

    SYNTAX  FddiTime

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The greatest lower bound of T_Max supported for

            this MAC."

    REFERENCE

            "ANSI { fddiMAC 13 }"

    ::= { snmpFddiMACEntry 4 }

snmpFddiMACTVXGreatestLowerBound OBJECT-TYPE

    SYNTAX  FddiTime

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The greatest lower bound of TVX supported for

            this MAC."

    REFERENCE

            "ANSI { fddiMAC 14 }"

    ::= { snmpFddiMACEntry 5 }

snmpFddiMACPathsAvailable OBJECT-TYPE

    SYNTAX  INTEGER (0..7)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "A value that indicates the PATH types available

            for this MAC.

            The value is a sum.  This value initially takes

            the value zero, then for each type of PATH that

            this MAC has available, 2 raised to a power is

            added to the sum.  The powers are according to the

            following table:

                     Path   Power

                  Primary   0

                Secondary   1

                    Local   2 "

    REFERENCE

            "ANSI { fddiMAC 22 }"

    ::= { snmpFddiMACEntry 6 }

snmpFddiMACCurrentPath OBJECT-TYPE

    SYNTAX  INTEGER {

                unknown(1),

                primary(2),

                secondary(4),

                local(8),

                isolated(16)

            }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "Indicates the association of the MAC with a

            station PATH."

    REFERENCE

            "ANSI { fddiMAC 23 }"

    ::= { snmpFddiMACEntry 7 }

snmpFddiMACUpstreamNbr OBJECT-TYPE

    SYNTAX  FddiMACLongAddressType -- OCTET STRING (SIZE (6))

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The MAC's upstream neighbor's long individual MAC

            address.  It may be determined by the Neighbor

            Information Frame protocol (refer to ANSI SMT

            7.2.1).  The value shall be reported as '00 00 00

            00 00 00' if it is unknown."

    REFERENCE

            "ANSI { fddiMAC 24 }"

    ::= { snmpFddiMACEntry 8 }

snmpFddiMACOldUpstreamNbr OBJECT-TYPE

    SYNTAX  FddiMACLongAddressType -- OCTET STRING (SIZE (6))

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The previous value of the MAC's upstream

            neighbor's long individual MAC address.  It may be

            determined by the Neighbor Information Frame

            protocol (refer to ANSI SMT 7.2.1).  The value

            shall be reported as '00 00 00 00 00 00' if it is

            unknown."

    REFERENCE

            "ANSI { fddiMAC 26 }"

    ::= { snmpFddiMACEntry 9 }

snmpFddiMACDupAddrTest OBJECT-TYPE

    SYNTAX  INTEGER { none(1), pass(2), fail(3) }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The Duplicate Address Test flag, Dup_Addr_Test

            (refer to ANSI 8.3.1)."

    REFERENCE

            "ANSI { fddiMAC 29 }"

    ::= { snmpFddiMACEntry 10 }

snmpFddiMACPathsRequested OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "A value that indicates PATH(s) desired for this

            MAC.

            The value is a sum which represents the individual

            PATHs that are desired.  This value initially

            takes the value zero, then for each type of PATH

            that this node is, 2 raised to a power is added to

            the sum.  The powers are according to the

            following table:

                     Path   Power

                  Primary   0

                Secondary   1

                    Local   2

                 Isolated   3

            The precedence order is primary, secondary, local,

            and then isolated if multiple PATHs are desired

            are set."

    REFERENCE

            "ANSI { fddiMAC 32 }"

    ::= { snmpFddiMACEntry 11 }

snmpFddiMACDownstreamPORTType OBJECT-TYPE

    SYNTAX  INTEGER { a(1), b(2), s(3), m(4), unknown(5) }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "Indicates the PC-Type of the first port that is

            downstream of this MAC (the exit port)."

    REFERENCE

            "ANSI { fddiMAC 33 }"

    ::= { snmpFddiMACEntry 12 }

snmpFddiMACSMTAddress OBJECT-TYPE

    SYNTAX  FddiMACLongAddressType -- OCTET STRING (SIZE (6))

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The 48 bit individual address of the MAC used for

            SMT frames."

    REFERENCE

            "ANSI { fddiMAC 41 }"

    ::= { snmpFddiMACEntry 13 }

snmpFddiMACTReq OBJECT-TYPE

    SYNTAX  FddiTime

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The value of T-Req (refer to ANSI MAC 2.2.1 and

            ANSI MAC 7.3.5.2)."

    REFERENCE

            "ANSI { fddiMAC 51 }"

    ::= { snmpFddiMACEntry 14 }

snmpFddiMACTNeg OBJECT-TYPE

    SYNTAX  FddiTime

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The value of T-Neg (refer to ANSI MAC 2.2.1 and

            ANSI MAC 7.3.5.2)."

    REFERENCE

            "ANSI { fddiMAC 52 }"

    ::= { snmpFddiMACEntry 15 }

snmpFddiMACTMax OBJECT-TYPE

    SYNTAX  FddiTime

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The value of T-Max (refer to ANSI MAC 2.2.1 and

            ANSI MAC 7.3.5.2)."

    REFERENCE

            "ANSI { fddiMAC 53 }"

    ::= { snmpFddiMACEntry 16 }

snmpFddiMACTvxValue OBJECT-TYPE

    SYNTAX  FddiTime