RADIUS-ACC-CLIENT-MIB DEFINITIONS ::= BEGIN

IMPORTS

       MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,

       Counter32, Integer32, Gauge32,

       IpAddress, TimeTicks, mib-2      FROM SNMPv2-SMI

       SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB

       InetAddressType, InetAddress,

       InetPortNumber                   FROM INET-ADDRESS-MIB

       MODULE-COMPLIANCE, OBJECT-GROUP  FROM SNMPv2-CONF;

radiusAccClientMIB MODULE-IDENTITY

      LAST-UPDATED "200608210000Z" -- 21 August 2006

      ORGANIZATION "IETF RADIUS Extensions Working Group."

      CONTACT-INFO

             " Bernard Aboba

               Microsoft

               One Microsoft Way

               Redmond, WA  98052

               US

               Phone: +1 425 936 6605

               EMail: bernarda@microsoft.com"

      DESCRIPTION

            "The MIB module for entities implementing the client

             side of the Remote Authentication Dial-In User Service

             (RADIUS) accounting protocol.  Copyright (C) The

             Internet Society (2006).  This version of this MIB

             module is part of RFC 4670; see the RFC itself for

             full legal notices."

      REVISION "200608210000Z"  -- 21 August 2006

      DESCRIPTION

            "Revised version as published in RFC 4670.

             This version obsoletes that of RFC 2620 by

             deprecating the MIB table containing IPv4-only

             address formats and defining a new table to add support

             for version-neutral IP address formats.  The remaining

             MIB objects from RFC 2620 are carried forward into this

             version."

      REVISION "199906110000Z"  -- 11 Jun 1999

      DESCRIPTION "Initial version as published in RFC 2620."

      ::= { radiusAccounting 2 }

radiusMIB OBJECT-IDENTITY

      STATUS  current

      DESCRIPTION

             "The OID assigned to RADIUS MIB work by the IANA."

      ::= { mib-2 67 }

radiusAccounting  OBJECT IDENTIFIER ::= {radiusMIB 2}

radiusAccClientMIBObjects     OBJECT IDENTIFIER

      ::= { radiusAccClientMIB 1 }

radiusAccClient  OBJECT IDENTIFIER

      ::= { radiusAccClientMIBObjects 1 }

radiusAccClientInvalidServerAddresses OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS current

      DESCRIPTION

            "The number of RADIUS Accounting-Response packets

             received from unknown addresses."

      ::= { radiusAccClient 1 }

radiusAccClientIdentifier OBJECT-TYPE

      SYNTAX SnmpAdminString

      MAX-ACCESS read-only

      STATUS current

      DESCRIPTION

            "The NAS-Identifier of the RADIUS accounting client.

             This is not necessarily the same as sysName in MIB

             II."

      REFERENCE "RFC 2865 section 5.32"

      ::= { radiusAccClient 2 }

radiusAccServerTable OBJECT-TYPE

      SYNTAX SEQUENCE OF RadiusAccServerEntry

      MAX-ACCESS not-accessible

      STATUS     deprecated

      DESCRIPTION

            "The (conceptual) table listing the RADIUS accounting

             servers with which the client shares a secret."

      ::= { radiusAccClient 3 }

radiusAccServerEntry OBJECT-TYPE

      SYNTAX     RadiusAccServerEntry

      MAX-ACCESS not-accessible

      STATUS     deprecated

      DESCRIPTION

            "An entry (conceptual row) representing a RADIUS

             accounting server with which the client shares a

             secret."

      INDEX      { radiusAccServerIndex }

      ::= { radiusAccServerTable 1 }

RadiusAccServerEntry ::= SEQUENCE {

      radiusAccServerIndex                           Integer32,

      radiusAccServerAddress                         IpAddress,

      radiusAccClientServerPortNumber                Integer32,

      radiusAccClientRoundTripTime                   TimeTicks,

      radiusAccClientRequests                        Counter32,

      radiusAccClientRetransmissions                 Counter32,

      radiusAccClientResponses                       Counter32,

      radiusAccClientMalformedResponses              Counter32,

      radiusAccClientBadAuthenticators               Counter32,

      radiusAccClientPendingRequests                   Gauge32,

      radiusAccClientTimeouts                        Counter32,

      radiusAccClientUnknownTypes                    Counter32,

      radiusAccClientPacketsDropped                  Counter32

}

radiusAccServerIndex OBJECT-TYPE

      SYNTAX     Integer32 (1..2147483647)

      MAX-ACCESS not-accessible

      STATUS     deprecated

      DESCRIPTION

            "A number uniquely identifying each RADIUS

             Accounting server with which this client

             communicates."

      ::= { radiusAccServerEntry 1 }

radiusAccServerAddress OBJECT-TYPE

      SYNTAX     IpAddress

      MAX-ACCESS read-only

      STATUS     deprecated

      DESCRIPTION

            "The IP address of the RADIUS accounting server

             referred to in this table entry."

      ::= { radiusAccServerEntry 2 }

radiusAccClientServerPortNumber  OBJECT-TYPE

      SYNTAX Integer32 (0..65535)

      MAX-ACCESS read-only

      STATUS deprecated

      DESCRIPTION

            "The UDP port the client is using to send requests to

             this server."

      REFERENCE "RFC 2866 section 3"

      ::= { radiusAccServerEntry 3 }

radiusAccClientRoundTripTime  OBJECT-TYPE

      SYNTAX TimeTicks

      MAX-ACCESS read-only

      STATUS deprecated

      DESCRIPTION

             "The time interval between the most recent

             Accounting-Response and the Accounting-Request that

             matched it from this RADIUS accounting server."

      REFERENCE "RFC 2866 section 2"

      ::= { radiusAccServerEntry 4 }

-- Request/Response statistics

--

-- Requests = Responses + PendingRequests + ClientTimeouts

--

-- Responses - MalformedResponses - BadAuthenticators -

-- UnknownTypes - PacketsDropped = Successfully received

radiusAccClientRequests OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS deprecated

      DESCRIPTION

            "The number of RADIUS Accounting-Request packets

             sent.  This does not include retransmissions."

      REFERENCE "RFC 2866 section 4.1"

      ::= { radiusAccServerEntry 5 }

radiusAccClientRetransmissions OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS deprecated

      DESCRIPTION

            "The number of RADIUS Accounting-Request packets

             retransmitted to this RADIUS accounting server.

             Retransmissions include retries where the

             Identifier and Acct-Delay have been updated, as

             well as those in which they remain the same."

      REFERENCE "RFC 2866 section 2"

      ::= { radiusAccServerEntry 6 }

radiusAccClientResponses OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS deprecated

      DESCRIPTION

            "The number of RADIUS packets received on the

             accounting port from this server."

      REFERENCE "RFC 2866 section 4.2"

      ::= { radiusAccServerEntry 7 }

radiusAccClientMalformedResponses OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS deprecated

      DESCRIPTION

             "The number of malformed RADIUS Accounting-Response

              packets received from this server.  Malformed packets

             include packets with an invalid length.  Bad

             authenticators and unknown types are not included as

             malformed accounting responses."

      REFERENCE "RFC 2866 section 3"

      ::= { radiusAccServerEntry 8 }

radiusAccClientBadAuthenticators OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS deprecated

      DESCRIPTION

            "The number of RADIUS Accounting-Response

             packets that contained invalid authenticators

             received from this server."

      REFERENCE "RFC 2866 section 3"

      ::= { radiusAccServerEntry 9 }

radiusAccClientPendingRequests OBJECT-TYPE

      SYNTAX Gauge32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS deprecated

      DESCRIPTION

            "The number of RADIUS Accounting-Request packets

             sent to this server that have not yet timed out or

             received a response.  This variable is incremented

             when an Accounting-Request is sent and decremented

             due to receipt of an Accounting-Response, a timeout,

             or a retransmission."

      REFERENCE "RFC 2866 section 2"

      ::= { radiusAccServerEntry 10 }

radiusAccClientTimeouts OBJECT-TYPE

     SYNTAX Counter32

     UNITS "timeouts"

     MAX-ACCESS read-only

     STATUS deprecated

     DESCRIPTION

          "The number of accounting timeouts to this server.

           After a timeout, the client may retry to the same

           server, send to a different server, or give up.

           A retry to the same server is counted as a

           retransmit as well as a timeout.  A send to a different

           server is counted as an Accounting-Request as well as

           a timeout."

      REFERENCE "RFC 2866 section 2"

      ::= { radiusAccServerEntry  11 }

radiusAccClientUnknownTypes OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS deprecated

      DESCRIPTION

            "The number of RADIUS packets of unknown type that

             were received from this server on the accounting port."

      REFERENCE "RFC 2866 section 4"

      ::= { radiusAccServerEntry  12 }

radiusAccClientPacketsDropped OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS deprecated

      DESCRIPTION

            "The number of RADIUS packets that were received from

             this server on the accounting port and dropped for some

             other reason."

      ::= { radiusAccServerEntry  13 }

-- New MIB objects added in this revision

radiusAccServerExtTable OBJECT-TYPE

      SYNTAX SEQUENCE OF RadiusAccServerExtEntry

      MAX-ACCESS not-accessible

      STATUS     current

      DESCRIPTION

            "The (conceptual) table listing the RADIUS accounting

             servers with which the client shares a secret."

      ::= { radiusAccClient 4 }

radiusAccServerExtEntry OBJECT-TYPE

      SYNTAX     RadiusAccServerExtEntry

      MAX-ACCESS not-accessible

      STATUS     current

      DESCRIPTION

            "An entry (conceptual row) representing a RADIUS

             accounting server with which the client shares a

             secret."

      INDEX      { radiusAccServerExtIndex }

      ::= { radiusAccServerExtTable 1 }

RadiusAccServerExtEntry ::= SEQUENCE {

      radiusAccServerExtIndex                    Integer32,

      radiusAccServerInetAddressType             InetAddressType,

      radiusAccServerInetAddress                 InetAddress,

      radiusAccClientServerInetPortNumber        InetPortNumber,

      radiusAccClientExtRoundTripTime            TimeTicks,

      radiusAccClientExtRequests                 Counter32,

      radiusAccClientExtRetransmissions          Counter32,

      radiusAccClientExtResponses                Counter32,

      radiusAccClientExtMalformedResponses       Counter32,

      radiusAccClientExtBadAuthenticators        Counter32,

      radiusAccClientExtPendingRequests          Gauge32,

      radiusAccClientExtTimeouts                 Counter32,

      radiusAccClientExtUnknownTypes             Counter32,

      radiusAccClientExtPacketsDropped           Counter32,

      radiusAccClientCounterDiscontinuity        TimeTicks

}

radiusAccServerExtIndex OBJECT-TYPE

      SYNTAX     Integer32 (1..2147483647)

      MAX-ACCESS not-accessible

      STATUS     current

      DESCRIPTION

            "A number uniquely identifying each RADIUS

             Accounting server with which this client

             communicates."

      ::= { radiusAccServerExtEntry 1 }

radiusAccServerInetAddressType OBJECT-TYPE

         SYNTAX     InetAddressType

         MAX-ACCESS read-only

         STATUS     current

         DESCRIPTION

               "The type of address format used for the

                radiusAccServerInetAddress object."

         ::= { radiusAccServerExtEntry 2 }

   radiusAccServerInetAddress OBJECT-TYPE

         SYNTAX     InetAddress

         MAX-ACCESS read-only

         STATUS     current

         DESCRIPTION

               "The IP address of the RADIUS accounting

                server referred to in this table entry, using

                the version-neutral IP address format."

         ::= { radiusAccServerExtEntry 3 }

   radiusAccClientServerInetPortNumber  OBJECT-TYPE

         SYNTAX InetPortNumber ( 1..65535 )

         MAX-ACCESS read-only

         STATUS current

         DESCRIPTION

               "The UDP port the client is using to send requests

                to this accounting server.  The value zero (0) is

                invalid."

         REFERENCE "RFC 2866 section 3"

         ::= { radiusAccServerExtEntry 4 }

radiusAccClientExtRoundTripTime  OBJECT-TYPE

      SYNTAX TimeTicks

      MAX-ACCESS read-only

      STATUS current

      DESCRIPTION

             "The time interval between the most recent

             Accounting-Response and the Accounting-Request that

             matched it from this RADIUS accounting server."

      REFERENCE "RFC 2866 section 2"

      ::= { radiusAccServerExtEntry 5 }

-- Request/Response statistics

--

-- Requests = Responses + PendingRequests + ClientTimeouts

--

-- Responses - MalformedResponses - BadAuthenticators -

-- UnknownTypes - PacketsDropped = Successfully received

radiusAccClientExtRequests OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS current

      DESCRIPTION

            "The number of RADIUS Accounting-Request packets

             sent.  This does not include retransmissions.

             This counter may experience a discontinuity when the

             RADIUS Accounting Client module within the managed

             entity is reinitialized, as indicated by the current

             value of radiusAccClientCounterDiscontinuity."

      REFERENCE "RFC 2866 section 4.1"

      ::= { radiusAccServerExtEntry 6 }

radiusAccClientExtRetransmissions OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS current

      DESCRIPTION

            "The number of RADIUS Accounting-Request packets

             retransmitted to this RADIUS accounting server.

             Retransmissions include retries where the

             Identifier and Acct-Delay have been updated, as

             well as those in which they remain the same.

             This counter may experience a discontinuity when the

             RADIUS Accounting Client module within the managed

             entity is reinitialized, as indicated by the current

             value of radiusAccClientCounterDiscontinuity."

      REFERENCE "RFC 2866 section 2"

      ::= { radiusAccServerExtEntry 7 }

radiusAccClientExtResponses OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS current

      DESCRIPTION

            "The number of RADIUS packets received on the

             accounting port from this server.  This counter

             may experience a discontinuity when the RADIUS

             Accounting Client module within the managed entity is

             reinitialized, as indicated by the current value of

             radiusAccClientCounterDiscontinuity."

      REFERENCE "RFC 2866 section 4.2"

      ::= { radiusAccServerExtEntry 8 }

radiusAccClientExtMalformedResponses OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS current

      DESCRIPTION

            "The number of malformed RADIUS Accounting-Response

             packets received from this server.  Malformed packets

             include packets with an invalid length.  Bad

             authenticators and unknown types are not included as

             malformed accounting responses.  This counter may

             experience a discontinuity when the RADIUS Accounting

             Client module within the managed entity is

             reinitialized, as indicated by the current

             value of radiusAccClientCounterDiscontinuity."

      REFERENCE "RFC 2866 section 3"

      ::= { radiusAccServerExtEntry 9 }

radiusAccClientExtBadAuthenticators OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS current

      DESCRIPTION

            "The number of RADIUS Accounting-Response

             packets that contained invalid authenticators

             received from this server.  This counter may

             experience a discontinuity when the RADIUS

             Accounting Client module within the managed

             entity is reinitialized, as indicated by the

             current value of

             radiusAccClientCounterDiscontinuity."

      REFERENCE "RFC 2866 section 3"

      ::= { radiusAccServerExtEntry 10 }

radiusAccClientExtPendingRequests OBJECT-TYPE

      SYNTAX Gauge32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS current

      DESCRIPTION

            "The number of RADIUS Accounting-Request packets

             sent to this server that have not yet timed out or

             received a response.  This variable is incremented

             when an Accounting-Request is sent and decremented

             due to receipt of an Accounting-Response, a timeout,

             or a retransmission.  This counter may experience a

             discontinuity when the RADIUS Accounting Client module

             within the managed entity is reinitialized, as

             indicated by the current value of

             radiusAccClientCounterDiscontinuity."

      REFERENCE "RFC 2866 section 2"

      ::= { radiusAccServerExtEntry 11 }

radiusAccClientExtTimeouts OBJECT-TYPE

     SYNTAX Counter32

     UNITS "timeouts"

     MAX-ACCESS read-only

     STATUS current

     DESCRIPTION

          "The number of accounting timeouts to this server.

           After a timeout, the client may retry to the same

           server, send to a different server, or give up.

           A retry to the same server is counted as a

           retransmit as well as a timeout.  A send to a different

           server is counted as an Accounting-Request as well as

           a timeout.  This counter may experience a discontinuity

           when the RADIUS Accounting Client module within the

           managed entity is reinitialized, as indicated by the

           current value of radiusAccClientCounterDiscontinuity."

      REFERENCE "RFC 2866 section 2"

      ::= { radiusAccServerExtEntry  12 }

radiusAccClientExtUnknownTypes OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS current

      DESCRIPTION

            "The number of RADIUS packets of unknown type that

             were received from this server on the accounting port.

             This counter may experience a discontinuity when the

             RADIUS Accounting Client module within the managed

             entity is reinitialized, as indicated by the current

             value of radiusAccClientCounterDiscontinuity."

      REFERENCE "RFC 2866 section 4"

      ::= { radiusAccServerExtEntry  13 }

radiusAccClientExtPacketsDropped OBJECT-TYPE

      SYNTAX Counter32

      UNITS "packets"

      MAX-ACCESS read-only

      STATUS current

      DESCRIPTION

            "The number of RADIUS packets that were received from

             this server on the accounting port and dropped for some

             other reason.  This counter may experience a

             discontinuity when the RADIUS Accounting Client module

             within the managed entity is reinitialized, as indicated

             by the current value of

             radiusAccClientCounterDiscontinuity."

      ::= { radiusAccServerExtEntry  14 }

radiusAccClientCounterDiscontinuity OBJECT-TYPE

         SYNTAX TimeTicks

         UNITS "centiseconds"

         MAX-ACCESS read-only

         STATUS current

         DESCRIPTION

               "The number of centiseconds since the last

                discontinuity in the RADIUS Accounting Client

                counters.  A discontinuity may be the result of a

                reinitialization of the RADIUS Accounting Client

                module within the managed entity."

         ::= { radiusAccServerExtEntry 15 }

-- conformance information

radiusAccClientMIBConformance  OBJECT IDENTIFIER

      ::= { radiusAccClientMIB 2 }

radiusAccClientMIBCompliances  OBJECT IDENTIFIER

      ::= { radiusAccClientMIBConformance 1 }

radiusAccClientMIBGroups  OBJECT IDENTIFIER

      ::= { radiusAccClientMIBConformance 2 }

-- units of conformance

radiusAccClientMIBCompliance MODULE-COMPLIANCE

     STATUS  deprecated

     DESCRIPTION

           "The compliance statement for accounting clients

            implementing the RADIUS Accounting Client MIB.

            Implementation of this module is for IPv4-only

            entities, or for backwards compatibility use with

            entities that support both IPv4 and IPv6."

     MODULE  -- this module

         MANDATORY-GROUPS { radiusAccClientMIBGroup }

     ::= { radiusAccClientMIBCompliances 1 }

radiusAccClientExtMIBCompliance MODULE-COMPLIANCE

     STATUS  current

     DESCRIPTION

           "The compliance statement for accounting

            clients implementing the RADIUS Accounting

            Client IPv6 Extensions MIB.  Implementation of

            this module is for entities that support IPv6,

            or support IPv4 and IPv6."

     MODULE  -- this module

         MANDATORY-GROUPS { radiusAccClientExtMIBGroup }

     OBJECT radiusAccServerInetAddressType

     SYNTAX InetAddressType { ipv4(1), ipv6(2) }

     DESCRIPTION

           "An implementation is only required to support

            IPv4 and globally unique IPv6 addresses."

     OBJECT radiusAccServerInetAddress

     SYNTAX InetAddress ( SIZE (4|16) )

     DESCRIPTION

           "An implementation is only required to support

            IPv4 and globally unique IPv6 addresses."

     ::= { radiusAccClientMIBCompliances 2 }

-- units of conformance

radiusAccClientMIBGroup OBJECT-GROUP

     OBJECTS { radiusAccClientIdentifier,

               radiusAccClientInvalidServerAddresses,

               radiusAccServerAddress,

               radiusAccClientServerPortNumber,

               radiusAccClientRoundTripTime,

               radiusAccClientRequests,

               radiusAccClientRetransmissions,

               radiusAccClientResponses,

               radiusAccClientMalformedResponses,

               radiusAccClientBadAuthenticators,

               radiusAccClientPendingRequests,

               radiusAccClientTimeouts,

               radiusAccClientUnknownTypes,

               radiusAccClientPacketsDropped

         }

     STATUS  deprecated

     DESCRIPTION

           "The basic collection of objects providing management of

            RADIUS Accounting Clients."

     ::= { radiusAccClientMIBGroups 1 }

radiusAccClientExtMIBGroup OBJECT-GROUP

     OBJECTS { radiusAccClientIdentifier,

               radiusAccClientInvalidServerAddresses,

               radiusAccServerInetAddressType,

               radiusAccServerInetAddress,

               radiusAccClientServerInetPortNumber,

               radiusAccClientExtRoundTripTime,

               radiusAccClientExtRequests,

               radiusAccClientExtRetransmissions,

               radiusAccClientExtResponses,

               radiusAccClientExtMalformedResponses,

               radiusAccClientExtBadAuthenticators,

               radiusAccClientExtPendingRequests,

               radiusAccClientExtTimeouts,

               radiusAccClientExtUnknownTypes,

               radiusAccClientExtPacketsDropped,

               radiusAccClientCounterDiscontinuity

         }

     STATUS  current

     DESCRIPTION

           "The basic collection of objects providing management of

            RADIUS Accounting Clients."

     ::= { radiusAccClientMIBGroups 2 }

END