Q-BRIDGE-MIB DEFINITIONS ::= BEGIN

-- -------------------------------------------------------------

-- MIB for IEEE 802.1Q Devices

-- -------------------------------------------------------------

IMPORTS

    MODULE-IDENTITY, OBJECT-TYPE,

    Counter32, Counter64, Unsigned32, TimeTicks, Integer32

        FROM SNMPv2-SMI

    RowStatus, TruthValue, TEXTUAL-CONVENTION, MacAddress

        FROM SNMPv2-TC

    SnmpAdminString

        FROM SNMP-FRAMEWORK-MIB

    MODULE-COMPLIANCE, OBJECT-GROUP

        FROM SNMPv2-CONF

    dot1dBridge, dot1dBasePortEntry, dot1dBasePort

        FROM BRIDGE-MIB

    EnabledStatus

        FROM P-BRIDGE-MIB

    TimeFilter

        FROM RMON2-MIB;

qBridgeMIB MODULE-IDENTITY

    LAST-UPDATED "200601090000Z"

    ORGANIZATION "IETF Bridge MIB Working Group"

    CONTACT-INFO

        "Email:  Bridge-mib@ietf.org

                 ietfmibs@ops.ietf.org

                 David Levi

         Postal: Nortel Networks

                 4655 Great America Parkway

                 Santa Clara, CA 95054

                 USA

         Phone:  +1 865 686 0432

         Email:  dlevi@nortel.com

                 David Harrington

         Postal: Effective Software

                 50 Harding Rd.

                 Portsmouth, NH 03801

                 USA

         Phone:  +1 603 436 8634

         Email:  ietfdbh@comcast.net

                 Les Bell

         Postal: Hemel Hempstead, Herts. HP2 7YU

                 UK

          Email: elbell@ntlworld.com

                 Andrew Smith

         Postal: Beijing Harbour Networks

                 Jiuling Building

                 21 North Xisanhuan Ave.

                 Beijing, 100089

                 PRC

            Fax: +1 415 345 1827

          Email: ah_smith@acm.org

                 Paul Langille

         Postal: Newbridge Networks

                 5 Corporate Drive

                 Andover, MA 01810

                 USA

          Phone: +1 978 691 4665

          Email: langille@newbridge.com

                 Anil Rijhsinghani

         Postal: Accton Technology Corporation

                 5 Mount Royal Ave

                 Marlboro, MA 01752

                 USA

          Phone:

          Email: anil@accton.com

                 Keith McCloghrie

         Postal: Cisco Systems, Inc.

                 170 West Tasman Drive

                 San Jose, CA 95134-1706

                 USA

          Phone: +1 408 526 5260

          Email: kzm@cisco.com"

    DESCRIPTION

        "The VLAN Bridge MIB module for managing Virtual Bridged

        Local Area Networks, as defined by IEEE 802.1Q-2003,

        including Restricted Vlan Registration defined by

        IEEE 802.1u-2001 and Vlan Classification defined by

        IEEE 802.1v-2001.

        Copyright (C) The Internet Society (2006).  This version of

        this MIB module is part of RFC 4363; See the RFC itself for

        full legal notices."

    REVISION     "200601090000Z"

    DESCRIPTION

         "Added Vlan TEXTUAL-CONVENTIONs,

          dot1qPortRestrictedVlanRegistration, dot1vProtocol subtree,

          qBridgeClassificationDeviceGroup, qBridgePortGroup2,

          qBridgeClassificationPortGroup, and qBridgeCompliance2.

          Clarified dot1qForwardAllStaticPorts,

          qPortAcceptableFrameTypes, and qBridgeCompliance.

          Deprecated qBridgePortGroup and qBridgeCompliance."

    REVISION     "199908250000Z"

    DESCRIPTION

         "The VLAN Bridge MIB module for managing Virtual Bridged

        Local Area Networks, as defined by IEEE 802.1Q-1998.

        Initial version, published as RFC 2674."

    ::= { dot1dBridge 7 }

qBridgeMIBObjects OBJECT IDENTIFIER ::= { qBridgeMIB 1 }

-- -------------------------------------------------------------

-- Textual Conventions

-- -------------------------------------------------------------

PortList ::= TEXTUAL-CONVENTION

    STATUS      current

    DESCRIPTION

        "Each octet within this value specifies a set of eight

        ports, with the first octet specifying ports 1 through

        8, the second octet specifying ports 9 through 16, etc.

        Within each octet, the most significant bit represents

        the lowest numbered port, and the least significant bit

        represents the highest numbered port.  Thus, each port

        of the bridge is represented by a single bit within the

        value of this object.  If that bit has a value of '1',

        then that port is included in the set of ports; the port

        is not included if its bit has a value of '0'."

    SYNTAX      OCTET STRING

VlanIndex ::= TEXTUAL-CONVENTION

    DISPLAY-HINT "d"

    STATUS      current

    DESCRIPTION

        "A value used to index per-VLAN tables: values of 0 and

        4095 are not permitted.  If the value is between 1 and

        4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with

        global scope within a given bridged domain (see VlanId

        textual convention).  If the value is greater than 4095,

        then it represents a VLAN with scope local to the

        particular agent, i.e., one without a global VLAN-ID

        assigned to it.  Such VLANs are outside the scope of

        IEEE 802.1Q, but it is convenient to be able to manage them

        in the same way using this MIB."

    SYNTAX      Unsigned32

VlanId ::= TEXTUAL-CONVENTION

    DISPLAY-HINT "d"

    STATUS      current

    DESCRIPTION

        "The VLAN-ID that uniquely identifies a VLAN.  This

        is the 12-bit VLAN-ID used in the VLAN Tag header.

        The range is defined by the REFERENCEd specification."

    REFERENCE

        "IEEE Std 802.1Q 2003 Edition, Virtual Bridged

        Local Area Networks."

    SYNTAX      Integer32 (1..4094)

VlanIdOrAny ::= TEXTUAL-CONVENTION

    DISPLAY-HINT "d"

    STATUS       current

    DESCRIPTION

        "The VLAN-ID that uniquely identifies a specific VLAN,

        or any VLAN.  The special value of 4095 is used to

        indicate a wildcard, i.e., any VLAN.  This can be used

        in any situation where an object or table entry must

        refer either to a specific VLAN or to any VLAN.

        Note that a MIB object that is defined using this

        TEXTUAL-CONVENTION should clarify the meaning of

        'any VLAN' (i.e., the special value 4095)."

    SYNTAX       Integer32 (1..4094 | 4095)

VlanIdOrNone ::= TEXTUAL-CONVENTION

    DISPLAY-HINT "d"

    STATUS       current

    DESCRIPTION

        "The VLAN-ID that uniquely identifies a specific VLAN,

        or no VLAN.  The special value of zero is used to

        indicate that no VLAN-ID is present or used.  This can

        be used in any situation where an object or a table entry

        must refer either to a specific VLAN, or to no VLAN.

        Note that a MIB object that is defined using this

        TEXTUAL-CONVENTION should clarify the meaning of

        'no VLAN' (i.e., the special value 0)."

    SYNTAX       Integer32 (0 | 1..4094)

VlanIdOrAnyOrNone ::= TEXTUAL-CONVENTION

    DISPLAY-HINT "d"

    STATUS       current

    DESCRIPTION

        "The VLAN-ID that uniquely identifies a specific VLAN,

        any VLAN, or no VLAN.  The special values 0 and 4095

        have the same meaning as described in the VlanIdOrAny

        and VlanIdOrNone TEXTUAL-CONVENTIONs.

        Note that a MIB object that is defined using this

        TEXTUAL-CONVENTION should clarify the meaning of

        'any VLAN' and 'no VLAN' (i.e., the special values

        0 and 4095)."

    SYNTAX       Integer32 (0 | 1..4094 | 4095)

-- -------------------------------------------------------------

-- subtrees in the Q-BRIDGE MIB

-- -------------------------------------------------------------

dot1qBase       OBJECT IDENTIFIER ::= { qBridgeMIBObjects 1 }

dot1qTp         OBJECT IDENTIFIER ::= { qBridgeMIBObjects 2 }

dot1qStatic     OBJECT IDENTIFIER ::= { qBridgeMIBObjects 3 }

dot1qVlan       OBJECT IDENTIFIER ::= { qBridgeMIBObjects 4 }

dot1vProtocol   OBJECT IDENTIFIER ::= { qBridgeMIBObjects 5 }

-- -------------------------------------------------------------

-- dot1qBase subtree

-- -------------------------------------------------------------

dot1qVlanVersionNumber OBJECT-TYPE

    SYNTAX      INTEGER {

                    version1(1)

                }

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

        "The version number of IEEE 802.1Q that this device

        supports."

    REFERENCE

        "IEEE 802.1Q/D11 Section 12.10.1.1"

    ::= { dot1qBase 1 }

dot1qMaxVlanId OBJECT-TYPE

    SYNTAX      VlanId

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

        "The maximum IEEE 802.1Q VLAN-ID that this device

        supports."

    REFERENCE

        "IEEE 802.1Q/D11 Section 9.3.2.3"

    ::= { dot1qBase 2 }

dot1qMaxSupportedVlans OBJECT-TYPE

    SYNTAX      Unsigned32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

        "The maximum number of IEEE 802.1Q VLANs that this

        device supports."

    REFERENCE

        "IEEE 802.1Q/D11 Section 12.10.1.1"

    ::= { dot1qBase 3 }

dot1qNumVlans OBJECT-TYPE

    SYNTAX      Unsigned32

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

        "The current number of IEEE 802.1Q VLANs that are

        configured in this device."

    REFERENCE

        "IEEE 802.1Q/D11 Section 12.7.1.1"

    ::= { dot1qBase 4 }

dot1qGvrpStatus OBJECT-TYPE

    SYNTAX      EnabledStatus

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION

        "The administrative status requested by management for

        GVRP.  The value enabled(1) indicates that GVRP should

        be enabled on this device, on all ports for which it has

        not been specifically disabled.  When disabled(2), GVRP

        is disabled on all ports, and all GVRP packets will be

        forwarded transparently.  This object affects all GVRP

        Applicant and Registrar state machines.  A transition

        from disabled(2) to enabled(1) will cause a reset of all

        GVRP state machines on all ports.

        The value of this object MUST be retained across

        reinitializations of the management system."

    DEFVAL      { enabled }

    ::= { dot1qBase 5 }

-- -------------------------------------------------------------

-- the dot1qTp subtree

-- -------------------------------------------------------------

-- -------------------------------------------------------------

-- the current Filtering Database Table

-- -------------------------------------------------------------

dot1qFdbTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF Dot1qFdbEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "A table that contains configuration and control

        information for each Filtering Database currently

        operating on this device.  Entries in this table appear

        automatically when VLANs are assigned FDB IDs in the

        dot1qVlanCurrentTable."

    ::= { dot1qTp 1 }

dot1qFdbEntry OBJECT-TYPE

    SYNTAX      Dot1qFdbEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "Information about a specific Filtering Database."

    INDEX   { dot1qFdbId }

    ::= { dot1qFdbTable 1 }

Dot1qFdbEntry ::=

    SEQUENCE {

        dot1qFdbId

            Unsigned32,

        dot1qFdbDynamicCount

            Counter32

    }

dot1qFdbId OBJECT-TYPE

    SYNTAX       Unsigned32

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

        "The identity of this Filtering Database."

    ::= { dot1qFdbEntry 1 }

dot1qFdbDynamicCount OBJECT-TYPE

    SYNTAX       Counter32

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

        "The current number of dynamic entries in this

        Filtering Database."

    REFERENCE

        "IEEE 802.1Q/D11 Section 12.7.1.1.3"

    ::= { dot1qFdbEntry 2 }

-- -------------------------------------------------------------

-- Multiple Forwarding Databases for 802.1Q Transparent Devices

-- This table is an alternative to the dot1dTpFdbTable,

-- previously defined for 802.1D devices that only support a

-- single Forwarding Database.

-- -------------------------------------------------------------

dot1qTpFdbTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF Dot1qTpFdbEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "A table that contains information about unicast entries

        for which the device has forwarding and/or filtering

        information.  This information is used by the

        transparent bridging function in determining how to

        propagate a received frame."

    REFERENCE

        "IEEE 802.1Q/D11 Section 12.7.7"

    ::= { dot1qTp 2 }

dot1qTpFdbEntry OBJECT-TYPE

    SYNTAX      Dot1qTpFdbEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "Information about a specific unicast MAC address for

        which the device has some forwarding and/or filtering

        information."

    INDEX   { dot1qFdbId, dot1qTpFdbAddress }

    ::= { dot1qTpFdbTable 1 }

Dot1qTpFdbEntry ::=

    SEQUENCE {

        dot1qTpFdbAddress

            MacAddress,

        dot1qTpFdbPort

            Integer32,

        dot1qTpFdbStatus

            INTEGER

    }

dot1qTpFdbAddress OBJECT-TYPE

    SYNTAX      MacAddress

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "A unicast MAC address for which the device has

        forwarding and/or filtering information."

    ::= { dot1qTpFdbEntry 1 }

dot1qTpFdbPort OBJECT-TYPE

    SYNTAX      Integer32 (0..65535)

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

        "Either the value '0', or the port number of the port on

        which a frame having a source address equal to the value

        of the corresponding instance of dot1qTpFdbAddress has

        been seen.  A value of '0' indicates that the port

        number has not been learned but that the device does

        have some forwarding/filtering information about this

        address (e.g., in the dot1qStaticUnicastTable).

        Implementors are encouraged to assign the port value to

        this object whenever it is learned, even for addresses

        for which the corresponding value of dot1qTpFdbStatus is

        not learned(3)."

    ::= { dot1qTpFdbEntry 2 }

dot1qTpFdbStatus OBJECT-TYPE

    SYNTAX      INTEGER {

                    other(1),

                    invalid(2),

                    learned(3),

                    self(4),

                    mgmt(5)

                }

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

        "The status of this entry.  The meanings of the values

        are:

            other(1) - none of the following.  This may include

                the case where some other MIB object (not the

                corresponding instance of dot1qTpFdbPort, nor an

                entry in the dot1qStaticUnicastTable) is being

                used to determine if and how frames addressed to

                the value of the corresponding instance of

                dot1qTpFdbAddress are being forwarded.

            invalid(2) - this entry is no longer valid (e.g., it

                was learned but has since aged out), but has not

                yet been flushed from the table.

            learned(3) - the value of the corresponding instance

                of dot1qTpFdbPort was learned and is being used.

            self(4) - the value of the corresponding instance of

                dot1qTpFdbAddress represents one of the device's

                addresses.  The corresponding instance of

                dot1qTpFdbPort indicates which of the device's

                ports has this address.

            mgmt(5) - the value of the corresponding instance of

                dot1qTpFdbAddress is also the value of an

                existing instance of dot1qStaticAddress."

    ::= { dot1qTpFdbEntry 3 }

-- -------------------------------------------------------------

-- Dynamic Group Registration Table

-- -------------------------------------------------------------

dot1qTpGroupTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF Dot1qTpGroupEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "A table containing filtering information for VLANs

        configured into the bridge by (local or network)

        management, or learned dynamically, specifying the set of

        ports to which frames received on a VLAN for this FDB

        and containing a specific Group destination address are

        allowed to be forwarded."

    ::= { dot1qTp 3 }

dot1qTpGroupEntry OBJECT-TYPE

    SYNTAX      Dot1qTpGroupEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "Filtering information configured into the bridge by

        management, or learned dynamically, specifying the set of

        ports to which frames received on a VLAN and containing

        a specific Group destination address are allowed to be

        forwarded.  The subset of these ports learned dynamically

        is also provided."

    INDEX   { dot1qVlanIndex, dot1qTpGroupAddress }

    ::= { dot1qTpGroupTable 1 }

Dot1qTpGroupEntry ::=

    SEQUENCE {

        dot1qTpGroupAddress

            MacAddress,

        dot1qTpGroupEgressPorts

            PortList,

        dot1qTpGroupLearnt

            PortList

    }

dot1qTpGroupAddress OBJECT-TYPE

    SYNTAX      MacAddress

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "The destination Group MAC address in a frame to which

        this entry's filtering information applies."

    ::= { dot1qTpGroupEntry 1 }

dot1qTpGroupEgressPorts OBJECT-TYPE

    SYNTAX      PortList

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

        "The complete set of ports, in this VLAN, to which

        frames destined for this Group MAC address are currently

        being explicitly forwarded.  This does not include ports

        for which this address is only implicitly forwarded, in

        the dot1qForwardAllPorts list."

    ::= { dot1qTpGroupEntry 2 }

dot1qTpGroupLearnt OBJECT-TYPE

    SYNTAX      PortList

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

        "The subset of ports in dot1qTpGroupEgressPorts that

        were learned by GMRP or some other dynamic mechanism, in

        this Filtering database."

    ::= { dot1qTpGroupEntry 3 }

-- -------------------------------------------------------------

-- Service Requirements subtree

-- -------------------------------------------------------------

dot1qForwardAllTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF Dot1qForwardAllEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "A table containing forwarding information for each

        VLAN, specifying the set of ports to which forwarding of

        all multicasts applies, configured statically by

        management or dynamically by GMRP.  An entry appears in

        this table for all VLANs that are currently

        instantiated."

    REFERENCE

        "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"

    ::= { dot1qTp 4 }

dot1qForwardAllEntry OBJECT-TYPE

    SYNTAX      Dot1qForwardAllEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "Forwarding information for a VLAN, specifying the set

        of ports to which all multicasts should be forwarded,

        configured statically by management or dynamically by

        GMRP."

    INDEX   { dot1qVlanIndex }

    ::= { dot1qForwardAllTable 1 }

Dot1qForwardAllEntry ::=

    SEQUENCE {

        dot1qForwardAllPorts

            PortList,

        dot1qForwardAllStaticPorts

            PortList,

        dot1qForwardAllForbiddenPorts

            PortList

    }

dot1qForwardAllPorts OBJECT-TYPE

    SYNTAX      PortList

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

        "The complete set of ports in this VLAN to which all

        multicast group-addressed frames are to be forwarded.

        This includes ports for which this need has been

        determined dynamically by GMRP, or configured statically

        by management."

    ::= { dot1qForwardAllEntry 1 }

dot1qForwardAllStaticPorts OBJECT-TYPE

    SYNTAX      PortList

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION

        "The set of ports configured by management in this VLAN

        to which all multicast group-addressed frames are to be

        forwarded.  Ports entered in this list will also appear

        in the complete set shown by dot1qForwardAllPorts.  This

        value will be restored after the device is reset.  This

        only applies to ports that are members of the VLAN,

        defined by dot1qVlanCurrentEgressPorts.  A port may not

        be added in this set if it is already a member of the

        set of ports in dot1qForwardAllForbiddenPorts.  The

        default value is a string of ones of appropriate length,

        to indicate the standard behaviour of using basic

        filtering services, i.e., forward all multicasts to all

        ports.

        The value of this object MUST be retained across

        reinitializations of the management system."

    ::= { dot1qForwardAllEntry 2 }

dot1qForwardAllForbiddenPorts OBJECT-TYPE

    SYNTAX      PortList

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION

        "The set of ports configured by management in this VLAN

        for which the Service Requirement attribute Forward All

        Multicast Groups may not be dynamically registered by

        GMRP.  This value will be restored after the device is

        reset.  A port may not be added in this set if it is

        already a member of the set of ports in

        dot1qForwardAllStaticPorts.  The default value is a

        string of zeros of appropriate length.

        The value of this object MUST be retained across

        reinitializations of the management system."

    ::= { dot1qForwardAllEntry 3 }

dot1qForwardUnregisteredTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF Dot1qForwardUnregisteredEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "A table containing forwarding information for each

        VLAN, specifying the set of ports to which forwarding of

        multicast group-addressed frames for which no

        more specific forwarding information applies.  This is

        configured statically by management and determined

        dynamically by GMRP.  An entry appears in this table for

        all VLANs that are currently instantiated."

    REFERENCE

        "IEEE 802.1Q/D11 Section 12.7.2, 12.7.7"

    ::= { dot1qTp 5 }

dot1qForwardUnregisteredEntry OBJECT-TYPE

    SYNTAX      Dot1qForwardUnregisteredEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "Forwarding information for a VLAN, specifying the set

        of ports to which all multicasts for which there is no

        more specific forwarding information shall be forwarded.

        This is configured statically by management or

        dynamically by GMRP."

    INDEX   { dot1qVlanIndex }

    ::= { dot1qForwardUnregisteredTable 1 }

Dot1qForwardUnregisteredEntry ::=

    SEQUENCE {

        dot1qForwardUnregisteredPorts

            PortList,

        dot1qForwardUnregisteredStaticPorts

            PortList,

        dot1qForwardUnregisteredForbiddenPorts

            PortList

    }

dot1qForwardUnregisteredPorts OBJECT-TYPE

    SYNTAX      PortList

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

        "The complete set of ports in this VLAN to which

        multicast group-addressed frames for which there is no

        more specific forwarding information will be forwarded.

        This includes ports for which this need has been

        determined dynamically by GMRP, or configured statically

        by management."

    ::= { dot1qForwardUnregisteredEntry 1 }

dot1qForwardUnregisteredStaticPorts OBJECT-TYPE

    SYNTAX      PortList

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION

        "The set of ports configured by management, in this

        VLAN, to which multicast group-addressed frames for

        which there is no more specific forwarding information

        are to be forwarded.  Ports entered in this list will

        also appear in the complete set shown by

        dot1qForwardUnregisteredPorts.  This value will be

        restored after the device is reset.  A port may not be

        added in this set if it is already a member of the set

        of ports in dot1qForwardUnregisteredForbiddenPorts.  The

        default value is a string of zeros of appropriate

        length, although this has no effect with the default

        value of dot1qForwardAllStaticPorts.

        The value of this object MUST be retained across

        reinitializations of the management system."

    ::= { dot1qForwardUnregisteredEntry 2 }

dot1qForwardUnregisteredForbiddenPorts OBJECT-TYPE

    SYNTAX      PortList

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION

        "The set of ports configured by management in this VLAN

        for which the Service Requirement attribute Forward

        Unregistered Multicast Groups may not be dynamically

        registered by GMRP.  This value will be restored after

        the device is reset.  A port may not be added in this

        set if it is already a member of the set of ports in

        dot1qForwardUnregisteredStaticPorts.  The default value

        is a string of zeros of appropriate length.

        The value of this object MUST be retained across

        reinitializations of the management system."

    ::= { dot1qForwardUnregisteredEntry 3 }

-- -------------------------------------------------------------

-- The Static (Destination-Address Filtering) Database

-- -------------------------------------------------------------

dot1qStaticUnicastTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF Dot1qStaticUnicastEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "A table containing filtering information for Unicast

        MAC addresses for each Filtering Database, configured

        into the device by (local or network) management

        specifying the set of ports to which frames received

        from specific ports and containing specific unicast

        destination addresses are allowed to be forwarded.  A

        value of zero in this table (as the port number from

        which frames with a specific destination address are

        received) is used to specify all ports for which there

        is no specific entry in this table for that particular

        destination address.  Entries are valid for unicast

        addresses only."

    REFERENCE

        "IEEE 802.1Q/D11 Section 12.7.7,

        ISO/IEC 15802-3 Section 7.9.1"

    ::= { dot1qStatic 1 }

dot1qStaticUnicastEntry OBJECT-TYPE

    SYNTAX      Dot1qStaticUnicastEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "Filtering information configured into the device by

        (local or network) management specifying the set of

        ports to which frames received from a specific port and

        containing a specific unicast destination address are

        allowed to be forwarded."

    INDEX   {

        dot1qFdbId,

        dot1qStaticUnicastAddress,

        dot1qStaticUnicastReceivePort

    }

    ::= { dot1qStaticUnicastTable 1 }

Dot1qStaticUnicastEntry ::=

    SEQUENCE {

        dot1qStaticUnicastAddress

            MacAddress,

        dot1qStaticUnicastReceivePort

            Integer32,

        dot1qStaticUnicastAllowedToGoTo

            PortList,

        dot1qStaticUnicastStatus

            INTEGER

    }

dot1qStaticUnicastAddress OBJECT-TYPE

    SYNTAX      MacAddress

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "The destination MAC address in a frame to which this

        entry's filtering information applies.  This object must

        take the value of a unicast address."

    ::= { dot1qStaticUnicastEntry 1 }

dot1qStaticUnicastReceivePort OBJECT-TYPE

    SYNTAX      Integer32 (0..65535)

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "Either the value '0' or the port number of the port

        from which a frame must be received in order for this

        entry's filtering information to apply.  A value of zero

        indicates that this entry applies on all ports of the

        device for which there is no other applicable entry."

    ::= { dot1qStaticUnicastEntry 2 }

dot1qStaticUnicastAllowedToGoTo OBJECT-TYPE

    SYNTAX      PortList

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION

        "The set of ports for which a frame with a specific

        unicast address will be flooded in the event that it

        has not been learned.  It also specifies the set of

        ports on which a specific unicast address may be dynamically

        learned.  The dot1qTpFdbTable will have an equivalent

        entry with a dot1qTpFdbPort value of '0' until this

        address has been learned, at which point it will be updated

        with the port the address has been seen on.  This only

        applies to ports that are members of the VLAN, defined

        by dot1qVlanCurrentEgressPorts.  The default value of

        this object is a string of ones of appropriate length.

        The value of this object MUST be retained across

        reinitializations of the management system."

    REFERENCE

        "IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5"

    ::= { dot1qStaticUnicastEntry 3 }

dot1qStaticUnicastStatus OBJECT-TYPE

    SYNTAX      INTEGER {

                    other(1),

                    invalid(2),

                    permanent(3),

                    deleteOnReset(4),

                    deleteOnTimeout(5)

                }

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION

        "This object indicates the status of this entry.

            other(1) - this entry is currently in use, but

                the conditions under which it will remain

                so differ from the following values.

            invalid(2) - writing this value to the object

                removes the corresponding entry.

            permanent(3) - this entry is currently in use

                and will remain so after the next reset of

                the bridge.

            deleteOnReset(4) - this entry is currently in

                use and will remain so until the next

                reset of the bridge.

            deleteOnTimeout(5) - this entry is currently in

                use and will remain so until it is aged out.

        The value of this object MUST be retained across

        reinitializations of the management system."

    DEFVAL      { permanent }