PKTC-IETF-SIG-MIB DEFINITIONS ::= BEGIN

IMPORTS

    MODULE-IDENTITY,

    OBJECT-TYPE,

    Integer32,

    Unsigned32,

    mib-2

          FROM SNMPv2-SMI                   -- [RFC2578]

    InetAddressType,

    InetAddress,

    InetPortNumber

          FROM INET-ADDRESS-MIB             -- [RFC4001]

    TEXTUAL-CONVENTION,

    RowStatus,

    TruthValue

          FROM SNMPv2-TC                    -- [RFC2579]

    OBJECT-GROUP,

    MODULE-COMPLIANCE

          FROM SNMPv2-CONF                  -- [RFC2580]

    SnmpAdminString

          FROM SNMP-FRAMEWORK-MIB           -- [RFC3411]

    ifIndex

          FROM IF-MIB                       -- [RFC2863]

    Dscp

          FROM DIFFSERV-DSCP-TC;            -- [RFC3289]

pktcIetfSigMib MODULE-IDENTITY

    LAST-UPDATED    "200712180000Z" -- December 18, 2007

    ORGANIZATION    "IETF IPCDN Working Group"

    CONTACT-INFO

        "Sumanth Channabasappa

         Cable Television Laboratories, Inc.

         858 Coal Creek Circle,

         Louisville, CO 80027, USA

         Phone: +1 303-661-3307

         Email: Sumanth@cablelabs.com

         Gordon Beacham

         Motorola, Inc.

         6450 Sequence Drive, Bldg. 1

         San Diego, CA 92121, USA

         Phone: +1 858-404-2334

         Email: gordon.beacham@motorola.com

         Satish Kumar Mudugere Eswaraiah

         Texas Instruments India (P) Ltd.,

         Golf view, Wind Tunnel Road

         Murugesh Palya

         Bangalore 560 017, INDIA

         Phone:   +91 80 5269451

         Email:  satish.kumar@ti.com

    IETF IPCDN Working Group

         General Discussion: ipcdn@ietf.org

         Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn

         Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn

         Co-Chair: Jean-Francois Mule, jf.mule@cablelabs.com

         Co-Chair: Richard Woundy, Richard_Woundy@cable.comcast.com"

    DESCRIPTION

       "This MIB module supplies the basic management

        objects for the PacketCable and IPCablecom Signaling

        protocols.  This version of the MIB includes

        common signaling and Network Call Signaling

        (NCS)-related signaling objects.

        Copyright (C) The IETF Trust (2008).  This version of

        this MIB module is part of RFC 5098; see the RFC itself for

        full legal notices."

    REVISION                "200712180000Z"

    DESCRIPTION

       "Initial version, published as RFC 5098."

::=  { mib-2 169 }

-- Textual Conventions

TenthdBm ::= TEXTUAL-CONVENTION

    DISPLAY-HINT "d-1"

    STATUS       current

    DESCRIPTION

        "This TEXTUAL-CONVENTION represents power levels that are

         normally expressed in dBm.  Units are in tenths of a dBm;

         for example, -13.5 dBm will be represented as -135."

    SYNTAX       Integer32

PktcCodecType ::= TEXTUAL-CONVENTION

    STATUS       current

    DESCRIPTION

        " This TEXTUAL-CONVENTION defines various types of codecs

          that MAY be supported.  The description for each

          enumeration is listed below:

          Enumeration     Description

          other           a defined codec not in the enumeration

          unknown         a codec not defined by the PacketCable

                          Codec Specification

          g729            ITU-T Recommendation G.729

          reserved        for future use

          g729E           ITU-T Recommendation G.729E

          pcmu            Pulse Code Modulation u-law (PCMU)

          g726at32        ITU-T Recommendation G.726-32 (32 kbit/s)

          g728            ITU-T Recommendation G.728

          pcma            Pulse Code Modulation a-law (PCMA)

          g726at16        ITU-T Recommendation G.726-16 (16 kbit/s)

          g726at24        ITU-T Recommendation G.726-24 (24 kbit/s)

          g726at40        ITU-T Recommendation G.726-40 (40 kbit/s)

          ilbc            IETF Internet low-bit rate codec

          bv16            Broadcom BroadVoice16

          The list of codecs is consistent with the IETF

          Real-Time Transport Protocol (RTP) Profile registry and

          the RTP Map Parameters Table in PacketCable Audio/Video

          Codecs Specification [PKT-SP-CODEC].  The literal codec

          name for each codec is listed below:

          Codec     Literal Codec Name

          g729              G729

          g729E             G729E

          pcmu              PCMU

          g726at32          G726-32

          g728              G728

          pcma              PCMA

          g726at16          G726-16

          g726at24          G726-24

          g726at40          G726-40

          ilbc              iLBC

          bv16              BV16

          The literal codec name is the second column of the table

          with codec RTP Map Parameters.  The Literal Codec Name Column

          contains the codec name used in the local connection

          options (LCO) of the NCS messages create connection

          (CRCX)/modify connection (MDCX) and is also used to

          identify the codec in the Call Management System (CMS)

          Provisioning Specification.  The RTP Map Parameter column of

          the Table contains the string used in the media attribute

          line (a=) of the session description protocol (SDP)

          parameters in NCS messages."

    SYNTAX INTEGER {

               other     (1),

               unknown   (2),

               g729      (3),

               reserved  (4),

               g729E     (5),

               pcmu      (6),

               g726at32  (7),

               g728      (8),

               pcma      (9),

               g726at16  (10),

               g726at24  (11),

               g726at40  (12),

               ilbc      (13),

               bv16      (14)

    }

PktcRingCadence   ::= TEXTUAL-CONVENTION

    STATUS        current

    DESCRIPTION

          "This object provides an encoding scheme for ring

          cadences, including repeatability characteristics.  All

          fields in this object MUST be encoded in network-byte

          order.

          The first three higher-order octets are reserved.  The

          octets that follow are used to encode a 'bit-string', with

          each bit corresponding to 50 milliseconds.  A bit value of

          '1' indicates the presence of a ring-tone, and a bit value

          of '0' indicates the absence of a ring-tone, for that

          duration (50 ms) (Note: A minimum number of octets

          required to encode the bit-string MUST be used).

          The first two of the reserved octets MUST indicate the

          length of the encoded cadence (in bits) and MUST range

          between 1 and 264.  (Note: The length in bits MUST also be

          consistent with the number of octets that encode the

          cadence).  The MTA MUST ignore any unused bits in the last

          octet, but MUST reflect the value as provided on

          subsequent SNMP GETs.

          The third of the reserved octets indicates 'repeatability'

          and MUST be either 0x80 or 0x00 -- the former value

          indicating 'non-repeatability', and the latter indicating

          'repeatability'.

          The MTA MUST reject attempts to set a value that violates

          any of the above requirements."

    SYNTAX  OCTET STRING (SIZE(4..36))

PktcSigType     ::= TEXTUAL-CONVENTION

    STATUS       current

    DESCRIPTION

        " This object lists the various types of signaling that may

          be supported:

          other(1) - set when signaling other than NCS is used

          ncs(2)   - Network Call Signaling is a derivation of MGCP

                    (Media Gateway Control Protocol) defined for

                     IPCablecom/PacketCable MTAs."

    SYNTAX INTEGER {

                   other(1),

                   ncs(2)

    }

DtmfCode::=TEXTUAL-CONVENTION

    STATUS       current

    DESCRIPTION

        "This TEXTUAL-CONVENTION represents the Dual-Tone

         Multi-Frequency (DTMF) Character used

         to indicate the start or end of the digit transition

         sequence used for caller id or Visual Message Waiting

         Indicator (VMWI).

         Note: The DTMF code '*' is indicated using 'dtmfcodeStar',

         and the DTMF code '#' is indicated using ' dtmfcodeHash'."

    SYNTAX       INTEGER {

                  dtmfcode0(0),

                  dtmfcode1(1),

                  dtmfcode2(2),

                  dtmfcode3(3),

                  dtmfcode4(4),

                  dtmfcode5(5),

                  dtmfcode6(6),

                  dtmfcode7(7),

                  dtmfcode8(8),

                  dtmfcode9(9),

                  dtmfcodeStar(10),

                  dtmfcodeHash(11),

                  dtmfcodeA(12),

                  dtmfcodeB(13),

                  dtmfcodeC(14),

                  dtmfcodeD(15)

}

PktcSubscriberSideSigProtocol::=TEXTUAL-CONVENTION

    STATUS  current

    DESCRIPTION

        "This TEXTUAL-CONVENTION represents the Signaling

         protocol being used for purposes such as caller id

         or VMWI.

         A value of fsk(1) indicates Frequency Shift Keying

         (FSK).

         A value of dtmf(2) indicates Dual-Tone Multi-Frequency

         (DTMF)."

         SYNTAX INTEGER {

                fsk(1),

                dtmf(2)

         }

pktcSigMibObjects OBJECT IDENTIFIER ::= { pktcIetfSigMib 1 }

pktcSigDevObjects OBJECT IDENTIFIER ::=

                                        { pktcSigMibObjects 1 }

pktcSigEndPntConfigObjects OBJECT IDENTIFIER ::=

                                        { pktcSigMibObjects 2 }

--

-- The codec table (pktcSigDevCodecTable) defines all combinations

-- of codecs supported by the Multimedia Terminal Adapter (MTA).

--

pktcSigDevCodecTable OBJECT-TYPE

    SYNTAX      SEQUENCE OF PktcSigDevCodecEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

         " This table describes the MTA-supported codec types.  An MTA

          MUST populate this table with all possible combinations of

          codecs it supports for simultaneous operation.  For example,

          an MTA with two endpoints may be designed with a particular

          Digital Signal Processing (DSP) and memory architecture that

          allows it to support the following fixed combinations of

          codecs for simultaneous operation:

          Codec Type     Maximum Number of Simultaneous Codecs

          PCMA                             3

          PCMA                             2

          PCMU                             1

          PCMA                             1

          PCMU                             2

          PCMU                             3

          PCMA                             1

          G729                             1

          G729                             2

          PCMU                             1

          G729                             1

          Based on this example, the entries in the codec table

          would be:

            pktcSigDev        pktcSigDev        pktcSigDev

          CodecComboIndex     CodecType          CodecMax

                 1               pcma                3

                 2               pcma                2

                 2               pcmu                1

                 3               pcma                1

                 3               pcmu                2

                 4               pcmu                3

                 5               pcma                1

                 5               g729                1

                 6               g729                2

                 7               pcmu                1

                 7               g729                1

          An operator querying this table is able to determine all

          possible codec combinations the MTA is capable of

          simultaneously supporting.

          This table MUST NOT include non-voice codecs."

    ::= { pktcSigDevObjects 1 }

pktcSigDevCodecEntry  OBJECT-TYPE

    SYNTAX      PktcSigDevCodecEntry

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        "Each entry represents the maximum number of active

         connections with a particular codec the MTA is capable of

         supporting.  Each row is indexed by a composite key

         consisting of a number enumerating the particular codec

         combination and the codec type."

    INDEX { pktcSigDevCodecComboIndex, pktcSigDevCodecType }

    ::= { pktcSigDevCodecTable 1 }

PktcSigDevCodecEntry  ::= SEQUENCE {

    pktcSigDevCodecComboIndex    Unsigned32,

    pktcSigDevCodecType     PktcCodecType,

    pktcSigDevCodecMax      Unsigned32

    }

pktcSigDevCodecComboIndex  OBJECT-TYPE

    SYNTAX      Unsigned32 (1..255)

    MAX-ACCESS  not-accessible

    STATUS      current

    DESCRIPTION

        " The index value that enumerates a particular codec

          combination in the pktcSigDevCodecTable."

    ::= { pktcSigDevCodecEntry 1 }

pktcSigDevCodecType  OBJECT-TYPE

    SYNTAX       PktcCodecType

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

        " A codec type supported by this MTA."

    ::= { pktcSigDevCodecEntry 2 }

pktcSigDevCodecMax  OBJECT-TYPE

    SYNTAX      Unsigned32(1..255)

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

        " The maximum number of simultaneous sessions of a

          particular codec that the MTA can support."

    ::= { pktcSigDevCodecEntry 3 }

--

-- These are the common signaling-related definitions that affect

-- the entire MTA device.

--

pktcSigDevEchoCancellation  OBJECT-TYPE

    SYNTAX       TruthValue

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

        " This object specifies if the device is capable of echo

          cancellation.  The MTA MUST set this MIB object to a

          value of true(1) if it is capable of echo

          cancellation, and a value of false(2) if not."

    ::= { pktcSigDevObjects 2 }

pktcSigDevSilenceSuppression  OBJECT-TYPE

    SYNTAX       TruthValue

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

        " This object specifies if the device is capable of

          silence suppression (as a result of Voice Activity

          Detection).  The MTA MUST set this MIB object to a

          value of true(1) if it is capable of silence

          suppression, and a value of false(2) if not."

::= { pktcSigDevObjects 3 }

pktcSigDevCidSigProtocol  OBJECT-TYPE

    SYNTAX       PktcSubscriberSideSigProtocol

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

        "This object is used to configure the subscriber-line

         protocol used for signaling on-hook caller id information.

         Different countries define different caller id signaling

         protocols to support caller identification.

         Setting this object at a value fsk(1) sets the subscriber

         line protocol to be Frequency Shift Keying (FSK).

         Setting this object at a value dtmf(2) sets the subscriber

         line protocol to be Dual-Tone Multi-Frequency (DTMF).

         The value of this MIB object MUST NOT persist across MTA

         reboots."

     REFERENCE

        "ETSI-EN-300-659-1 Specification"

     DEFVAL { fsk }

::= { pktcSigDevObjects 4 }

pktcSigDevR0Cadence     OBJECT-TYPE

    SYNTAX      PktcRingCadence

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION

        " This object specifies ring cadence 0 (a user-defined

          field).

          The value of this MIB object MUST NOT persist across MTA

          reboots."

    ::= { pktcSigDevObjects 5 }

pktcSigDevR1Cadence     OBJECT-TYPE

    SYNTAX      PktcRingCadence

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION

        " This object specifies ring cadence 1 (a user-defined

          field).

          The value of this MIB object MUST NOT persist across MTA

          reboots."

    ::= { pktcSigDevObjects 6 }

pktcSigDevR2Cadence     OBJECT-TYPE

    SYNTAX       PktcRingCadence

    MAX-ACCESS    read-write

    STATUS        current

    DESCRIPTION

        " This object specifies ring cadence 2 (a user-defined

          field).

          The value of this MIB object MUST NOT persist across MTA

          reboots."

    ::= { pktcSigDevObjects 7 }

pktcSigDevR3Cadence     OBJECT-TYPE

    SYNTAX       PktcRingCadence

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

        " This object specifies ring cadence 3 (a user-defined

          field).

          The value of this MIB object MUST NOT persist across MTA

          reboots."

    ::= { pktcSigDevObjects 8 }

pktcSigDevR4Cadence     OBJECT-TYPE

    SYNTAX       PktcRingCadence

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

        " This object specifies ring cadence 4 (a user-defined

          field).

          The value of this MIB object MUST NOT persist across MTA

          reboots."

    ::= { pktcSigDevObjects 9 }

pktcSigDevR5Cadence     OBJECT-TYPE

    SYNTAX       PktcRingCadence

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

        " This object specifies ring cadence 5 (a user-defined

          field).

          The value of this MIB object MUST NOT persist across MTA

          reboots."

    ::= { pktcSigDevObjects 10 }

pktcSigDevR6Cadence     OBJECT-TYPE

    SYNTAX      PktcRingCadence

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION

        " This object specifies ring cadence 6 (a user-defined

          field).

          The value of this MIB object MUST NOT persist across MTA

          reboots."

    ::= { pktcSigDevObjects 11 }

pktcSigDevR7Cadence     OBJECT-TYPE

    SYNTAX       PktcRingCadence

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

        " This object specifies ring cadence 7 (a user-defined

          field).

          The value of this MIB object MUST NOT persist across MTA

          reboots."

    ::= { pktcSigDevObjects 12 }

pktcSigDevRgCadence     OBJECT-TYPE

    SYNTAX       PktcRingCadence

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

        " This object specifies ring cadence rg (a user-defined

          field).

          The value of this MIB object MUST NOT persist across MTA

          reboots."

    ::= { pktcSigDevObjects 13 }

pktcSigDevRsCadence     OBJECT-TYPE

    SYNTAX       PktcRingCadence

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

        " This object specifies ring cadence rs (a user-defined

          field).  The MTA MUST reject any attempt to make this object

          repeatable.

          The value of this MIB object MUST NOT persist across MTA

          reboots."

    ::= { pktcSigDevObjects 14 }

pktcSigDefCallSigDscp  OBJECT-TYPE

    SYNTAX      Dscp  -- RFC 3289: DIFFSERV-DSCP-TC

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION

        " The default value used in the IP header for setting the

          Differentiated Services Code Point (DSCP) value for call

          signaling.

          The value of this MIB object MUST NOT persist across MTA

          reboots."

    DEFVAL { 0 }

    ::= { pktcSigDevObjects 15 }

pktcSigDefMediaStreamDscp  OBJECT-TYPE

    SYNTAX      Dscp  -- RFC 3289: DIFFSERV-DSCP-TC

    MAX-ACCESS  read-write

    STATUS      current

    DESCRIPTION

        " This object contains the default value used in the IP

          header for setting the Differentiated Services Code Point

          (DSCP) value for media stream packets.  The MTA MUST NOT

          update this object with the value supplied by the CMS in

          the NCS messages (if present).  Any currently active

          connections are not affected by updates to this object.

          When the value of this object is updated by SNMP, the MTA

          MUST use the new value as a default starting only from

          new connections.

          The value of this MIB object MUST NOT persist across MTA

          reboots."

    DEFVAL { 0 }

    ::= { pktcSigDevObjects 16 }

--

-- pktcSigCapabilityTable - This table defines the valid signaling

-- types supported by this MTA.

--

pktcSigCapabilityTable    OBJECT-TYPE

    SYNTAX        SEQUENCE OF PktcSigCapabilityEntry

    MAX-ACCESS    not-accessible

    STATUS        current

    DESCRIPTION

        " This table describes the signaling types supported by this

          MTA."

    ::= { pktcSigDevObjects 17 }

pktcSigCapabilityEntry    OBJECT-TYPE

    SYNTAX        PktcSigCapabilityEntry

    MAX-ACCESS    not-accessible

    STATUS        current

    DESCRIPTION

        " Entries in pktcMtaDevSigCapabilityTable - list of

          supported signaling types, versions, and vendor extensions

          for this MTA.  Each entry in the list provides for one

          signaling type and version combination.  If the device

          supports multiple versions of the same signaling type, it

          will require multiple entries."

    INDEX { pktcSigCapabilityIndex }

    ::= { pktcSigCapabilityTable 1 }

PktcSigCapabilityEntry  ::= SEQUENCE {

    pktcSigCapabilityIndex             Unsigned32,

    pktcSigCapabilityType              PktcSigType,

    pktcSigCapabilityVersion           SnmpAdminString,

    pktcSigCapabilityVendorExt         SnmpAdminString

    }

pktcSigCapabilityIndex       OBJECT-TYPE

    SYNTAX        Unsigned32 (1..255)

    MAX-ACCESS    not-accessible

    STATUS        current

    DESCRIPTION

        " The index value that uniquely identifies an entry in the

          pktcSigCapabilityTable."

    ::= { pktcSigCapabilityEntry 1 }

pktcSigCapabilityType      OBJECT-TYPE

    SYNTAX        PktcSigType

    MAX-ACCESS    read-only

    STATUS        current

    DESCRIPTION

        " This object identifies the type of signaling used.  This

          value has to be associated with a single signaling

          version."

    ::= { pktcSigCapabilityEntry 2 }

pktcSigCapabilityVersion      OBJECT-TYPE

    SYNTAX        SnmpAdminString

    MAX-ACCESS    read-only

    STATUS        current

    DESCRIPTION

        " Provides the version of the signaling type - reference

          pktcSigCapabilityType.  Examples would be 1.0 or 2.33 etc."

    ::= { pktcSigCapabilityEntry 3 }

pktcSigCapabilityVendorExt      OBJECT-TYPE

    SYNTAX        SnmpAdminString

    MAX-ACCESS    read-only

    STATUS        current

    DESCRIPTION

        " The vendor extension allows vendors to provide a list of

          additional capabilities.

          The syntax for this MIB object in ABNF ([RFC5234]) is

          specified to be zero or more occurrences of vendor

          extensions, as follows:

           pktcSigCapabilityVendorExt  = *(vendor-extension)

           vendor-extension = (ext symbol alphanum) DQUOTE ; DQUOTE

           ext      = DQUOTE %x58 DQUOTE

           symbol   = (DQUOTE %x2D DQUOTE)/(DQUOTE %x2D DQUOTE)

           alphanum = 1*6(ALPHA/DIGIT)

        "

    ::= { pktcSigCapabilityEntry 4 }

pktcSigDefNcsReceiveUdpPort  OBJECT-TYPE

    SYNTAX      InetPortNumber (1025..65535)

    MAX-ACCESS  read-only

    STATUS      current

    DESCRIPTION

        " This object contains the MTA User Datagram Protocol (UDP)

          receive port that is being used for NCS call signaling.

          This object should only be changed by the configuration

          file.

          Unless changed via configuration, this MIB object MUST

          reflect a value of '2427'."

    REFERENCE

        "PacketCable NCS Specification"

    ::= { pktcSigDevObjects 18 }

pktcSigPowerRingFrequency    OBJECT-TYPE

    SYNTAX       INTEGER {

                 f20Hz(1),

                 f25Hz(2),

                 f33Point33Hz(3),

                 f50Hz(4),

                 f15Hz(5),

                 f16Hz(6),

                 f22Hz(7),

                 f23Hz(8),

                 f45Hz(9)

    }

    MAX-ACCESS   read-only

    STATUS       current

    DESCRIPTION

        " This object must only be provided via the configuration

          file during the provisioning process.  The power ring

          frequency is the frequency at which the sinusoidal voltage

          must travel down the twisted pair to make terminal

          equipment ring.  Different countries define different

          electrical characteristics to make terminal equipment

          ring.

          The f20Hz setting corresponds to a power ring frequency

          of 20 Hertz.  The f25Hz setting corresponds to a power ring

          frequency of 25 Hertz.  The f33Point33Hz setting

          corresponds to a power ring frequency of 33.33 Hertz.  The

          f50Hz setting corresponds to a power ring frequency of 50

          Hertz.  The f15Hz setting corresponds to a power ring

          frequency of 15 Hertz.  The f16Hz setting corresponds to a

          power ring frequency of 16 Hertz.  The f22Hz setting

          corresponds to a power ring frequency of 22 Hertz.  The

          f23Hz setting corresponds to a power ring frequency of 23

          Hertz.  The f45Hz setting corresponds to a power ring

          frequency of 45 Hertz."

    REFERENCE

          "ETSI-EN-300-001"

    ::= { pktcSigDevObjects 19 }

pktcSigPulseSignalTable    OBJECT-TYPE

    SYNTAX       SEQUENCE OF PktcSigPulseSignalEntry

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

        " The Pulse signal table defines the pulse signal operation.

          There are nine types of international pulse signals,

          with each signal having a set of provisionable parameters.

          The values of the MIB objects in this table take effect

          only if these parameters are not defined via signaling, in

          which case, the latter determines the values of the

          parameters.  The MIB objects in this table do not persist

          across MTA reboots."

    REFERENCE

        "ETSI-TS-101-909-4 Specification"

    ::= { pktcSigDevObjects 20 }

pktcSigPulseSignalEntry    OBJECT-TYPE

    SYNTAX       PktcSigPulseSignalEntry

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

        " This object defines the set of parameters associated with

          each particular value of pktcSigPulseSignalType.  Each

          entry in the pktcSigPulseSignalTable is indexed by the

          pktcSigPulseSignalType object.

          The conceptual rows MUST NOT persist across MTA reboots."

    INDEX { pktcSigPulseSignalType }

    ::= { pktcSigPulseSignalTable 1 }

PktcSigPulseSignalEntry ::= SEQUENCE {

        pktcSigPulseSignalType              INTEGER,

        pktcSigPulseSignalFrequency         INTEGER,

        pktcSigPulseSignalDbLevel           TenthdBm,

        pktcSigPulseSignalDuration          Unsigned32,

        pktcSigPulseSignalPulseInterval     Unsigned32,

        pktcSigPulseSignalRepeatCount       Unsigned32

}

pktcSigPulseSignalType    OBJECT-TYPE

    SYNTAX       INTEGER

                 {

                     initialRing(1),

                     pulseLoopClose(2),

                     pulseLoopOpen(3),

                     enableMeterPulse(4),

                     meterPulseBurst(5),

                     pulseNoBattery(6),

                     pulseNormalPolarity(7),

                     pulseReducedBattery(8),

                     pulseReversePolarity(9)

                 }

    MAX-ACCESS   not-accessible

    STATUS       current

    DESCRIPTION

        "There are nine types of international pulse signals.  These

         signals are defined as follows:

         initial ring

         pulse loop close

         pulse loop open

         enable meter pulse

         meter pulse burst

         pulse no battery

         pulse normal polarity

         pulse reduced battery

         pulse reverse polarity"

    REFERENCE

        "ETSI-EN-300-324-1 Specification"

    ::= { pktcSigPulseSignalEntry 1 }

pktcSigPulseSignalFrequency    OBJECT-TYPE

    SYNTAX       INTEGER {

                 twentyfive(1),

                 twelvethousand(2),

                 sixteenthousand(3)

    }

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

        " This object is only applicable to the initialRing,

          enableMeterPulse, and meterPulseBurst signal types.  This

          object identifies the frequency of the generated signal.

          The following table defines the default values for this

          object depending on signal type:

          pktcSigPulseSignalType     Default

          initialRing                25

          enableMeterPulse           16000

          meterPulseBurst            16000

          The value of twentyfive MUST only be used for the

          initialRing signal type.  The values of twelvethousand and

          sixteenthousand MUST only be used for enableMeterPulse and

          meterPulseBurst signal types.  An attempt to set this

          object while the value of pktcSigPulseSignalType is not

          initialRing, enableMeterPulse, or meterPulseBurst will

          result in an 'inconsistentValue' error."

    REFERENCE

        "ETSI-EN-300-001 Specification"

         ::= { pktcSigPulseSignalEntry 2}

pktcSigPulseSignalDbLevel    OBJECT-TYPE

    SYNTAX       TenthdBm (-350..0)

    UNITS        "1/10 of a dBm"

    MAX-ACCESS   read-write

    STATUS       current

    DESCRIPTION

        " This object is only applicable to the enableMeterPulse and

          meterPulseBurst signal types.  This is the decibel level

          for each frequency at which tones could be generated at

          the a and b terminals (TE connection point).  An attempt to

          set this object while the value of pktcSigPulseSignalType

          is not enableMeterPulse or meterPulseBurst will result in

          an 'inconsistentValue' error."

    REFERENCE

        "ETSI-EN-300-001 Specification"