MPLS-FTN-STD-MIB DEFINITIONS ::= BEGIN

IMPORTS

   MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64, Integer32

       FROM SNMPv2-SMI                                   -- [RFC2578]

   RowStatus, StorageType, RowPointer,

   TEXTUAL-CONVENTION, TimeStamp

       FROM SNMPv2-TC                                    -- [RFC2579]

   MODULE-COMPLIANCE, OBJECT-GROUP

       FROM SNMPv2-CONF                                  -- [RFC2580]

   InterfaceIndexOrZero,

   ifGeneralInformationGroup, ifCounterDiscontinuityGroup

       FROM IF-MIB                                       -- [RFC2863]

   SnmpAdminString

       FROM SNMP-FRAMEWORK-MIB                           -- [RFC3411]

   Dscp

       FROM DIFFSERV-DSCP-TC                             -- [RFC3289]

   InetAddressType, InetAddress, InetPortNumber

       FROM INET-ADDRESS-MIB                             -- [RFC3291]

   mplsStdMIB

       FROM MPLS-TC-STD-MIB                              -- [RFC3811]

   ;

mplsFTNStdMIB MODULE-IDENTITY

   LAST-UPDATED "200406030000Z"  -- June 6, 2004

   ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"

   CONTACT-INFO

       "

                Thomas D. Nadeau

        Postal: Cisco Systems, Inc.

                250 Apollo Drive

                Chelmsford, MA 01824

        Tel:    +1-978-244-3051

        Email:  tnadeau@cisco.com

                Cheenu Srinivasan

        Postal: Bloomberg L.P.

                499 Park Avenue

                New York, NY 10022

        Tel:    +1-212-893-3682

        Email:  cheenu@bloomberg.net

                Arun Viswanathan

        Postal: Force10 Networks, Inc.

                1440 McCarthy Blvd

                Milpitas, CA 95035

        Tel:    +1-408-571-3516

        Email:  arunv@force10networks.com

        IETF MPLS Working Group email: mpls@uu.net"

   DESCRIPTION

        "Copyright (C) The Internet Society (2004). The

        initial version of this MIB module was published

        in RFC 3814. For full legal notices see the RFC

        itself or see:

        http://www.ietf.org/copyrights/ianamib.html

        This MIB module contains managed object definitions for

        specifying FEC to NHLFE (FTN) mappings and corresponding

        performance for MPLS."

   -- Revision history.

   REVISION

       "200406030000Z"  -- June 3, 2004

   DESCRIPTION

       "Initial version issued as part of RFC 3814."

    ::= { mplsStdMIB 8 }

-- TEXTUAL-CONVENTIONs used in this MIB.

MplsFTNEntryIndex ::= TEXTUAL-CONVENTION

   STATUS              current

   DESCRIPTION

       "Index for an entry in mplsFTNTable."

   SYNTAX              Unsigned32 (1..4294967295)

MplsFTNEntryIndexOrZero ::= TEXTUAL-CONVENTION

   STATUS              current

   DESCRIPTION

       "Index for an entry in mplsFTNTable or the special value

        zero. The value zero is object-specific and must

        therefore be defined as part of the description of any

        object which uses this syntax.  Examples of the usage

        of zero might include situations when none or all

        entries in mplsFTNTable need to be referenced."

   SYNTAX              Unsigned32 (0..4294967295)

-- Top-Level Components of this MIB.

mplsFTNNotifications OBJECT IDENTIFIER ::= { mplsFTNStdMIB 0 }

mplsFTNObjects       OBJECT IDENTIFIER ::= { mplsFTNStdMIB 1 }

mplsFTNConformance   OBJECT IDENTIFIER ::= { mplsFTNStdMIB 2 }

-- Next free index in mplsFTNTable.

mplsFTNIndexNext OBJECT-TYPE

   SYNTAX              MplsFTNEntryIndexOrZero

   MAX-ACCESS          read-only

   STATUS              current

   DESCRIPTION

       "This object contains the next available valid value to

        be used for mplsFTNIndex when creating entries in the

        mplsFTNTable.

        When creating a new conceptual row (configuration

        entry) in mplsFTNTable with an SNMP SET operation the

        command generator (Network Management Application) must

        first issue a management protocol retrieval operation

        to obtain the current value of this object.

        If the command responder (agent) does not wish to allow

        creation of more entries in mplsFTNTable, possibly

        because of resource exhaustion, this object MUST return

        a value of 0.

        If a non-zero value is returned the Network Management

        Application must determine whether the value is indeed

        still unused since two Network Management Applications

        may attempt to create a row simultaneously and use the

        same value.

        If it is currently unused and the SET succeeds, the

        agent MUST change the value of this object to a

        currently unused non-zero value (according to an

        implementation specific algorithm) or zero (if no

        further row creation will be permitted).

        If the value is in use, however, the SET fails and the

        Network Management Application must then reread this

        object to obtain a new usable value."

   ::= { mplsFTNObjects 1 }

-- Last time an object in mplsFTNTable changed.

mplsFTNTableLastChanged OBJECT-TYPE

   SYNTAX              TimeStamp

   MAX-ACCESS          read-only

   STATUS              current

   DESCRIPTION

       "Indicates the last time an entry was added, deleted or

        modified in mplsFTNTable.  Management stations should

        consult this object to determine if mplsFTNTable

        requires their attention.  This object is particularly

        useful for applications performing a retrieval on

        mplsFTNTable to ensure that the table is not modified

        during the retrieval operation."

   ::=  { mplsFTNObjects 2 }

-- Table of FTN entries.

mplsFTNTable  OBJECT-TYPE

   SYNTAX          SEQUENCE OF MplsFTNEntry

   MAX-ACCESS      not-accessible

   STATUS          current

   DESCRIPTION

       "This table contains the currently defined FTN entries.

        This table allows FEC to NHLFE mappings to be

        specified.  Each entry in this table defines a rule to

        be applied to incoming packets (on interfaces that the

        FTN entry is activated on using mplsFTNMapTable) and an

        action to be taken on matching packets

        (mplsFTNActionPointer).

        This table supports 6-tuple matching rules based on one

        or more of source address range, destination address

        range, source port range, destination port range, IPv4

        Protocol field or IPv6 next-header field and the

        DiffServ Code Point (DSCP) to be specified.

        The action pointer points either to instance of

        mplsXCEntry in MPLS-LSR-STD-MIB when the NHLFE is a non-

        TE LSP, or to an instance of mplsTunnelEntry in the

        MPLS-TE-STD-MIB when the NHLFE is an originating TE

        tunnel."

   REFERENCE

       "J. Postel, Internet Protocol, RFC 791, STD 5, September

        1981

        Deering, S., and R. Hinden, Internet Protocol, Version

        6 (IPv6) Specification, RFC 2460, December 1998

        Nichols, K, Blake, S., Baker, F. and D. Black,

        Definition of the Differentiated Services Field (DS

        Field) in the IPv4 and IPv6 Headers, RFC 2474, December

        1998

        Srinivasan, C., A. Viswanathan, and T. Nadeau, MPLS

        Label Switch Router Management Information Base,

        RFC 3813

        Srinivasan, C., A. Viswanathan, and T. Nadeau, MPLS

        Traffic Engineering Management Information Base,

        RFC 3812"

   ::=  { mplsFTNObjects 3 }

mplsFTNEntry  OBJECT-TYPE

   SYNTAX          MplsFTNEntry

   MAX-ACCESS      not-accessible

   STATUS          current

   DESCRIPTION

       "Each entry represents one FTN entry which defines a

        rule to compare incoming packets with and an action to

        be taken on matching packets."

   INDEX { mplsFTNIndex }

   ::=  { mplsFTNTable 1 }

MplsFTNEntry  ::=  SEQUENCE {

      mplsFTNIndex               MplsFTNEntryIndex,

      mplsFTNRowStatus           RowStatus,

      mplsFTNDescr               SnmpAdminString,

      mplsFTNMask                BITS,

      mplsFTNAddrType            InetAddressType,

      mplsFTNSourceAddrMin       InetAddress,

      mplsFTNSourceAddrMax       InetAddress,

      mplsFTNDestAddrMin         InetAddress,

      mplsFTNDestAddrMax         InetAddress,

      mplsFTNSourcePortMin       InetPortNumber,

      mplsFTNSourcePortMax       InetPortNumber,

      mplsFTNDestPortMin         InetPortNumber,

      mplsFTNDestPortMax         InetPortNumber,

      mplsFTNProtocol            Integer32,

      mplsFTNDscp                Dscp,

      mplsFTNActionType          INTEGER,

      mplsFTNActionPointer       RowPointer,

      mplsFTNStorageType         StorageType

   }

mplsFTNIndex   OBJECT-TYPE

   SYNTAX              MplsFTNEntryIndex

   MAX-ACCESS          not-accessible

   STATUS              current

   DESCRIPTION

       "This is the unique index for a conceptual row in

        mplsFTNTable.

        To create a new conceptual row in mplsFTNTable a

        Network Management Application SHOULD retrieve the

        current value of mplsFTNIndexNext to determine the next

        valid available value of mplsFTNIndex."

   ::= { mplsFTNEntry 1 }

mplsFTNRowStatus OBJECT-TYPE

   SYNTAX              RowStatus

   MAX-ACCESS          read-create

   STATUS              current

   DESCRIPTION

       "Used for controlling the creation and deletion of this

        row. All writeable objects in this row may be modified

        at any time. If a Network Management Application

        attempts to delete a conceptual row by setting this

        object to 'destroy' and there are one or more entries

        in mplsFTNMapTable pointing to the row (i.e., when

        mplsFTNIndex of the conceptual row being deleted is

        equal to mplsFTNMapCurrIndex for one or more entries in

        mplsFTNMapTable), the agent MUST also destroy the

        corresponding entries in mplsFTNMapTable."

   ::= { mplsFTNEntry 2 }

mplsFTNDescr   OBJECT-TYPE

   SYNTAX              SnmpAdminString

   MAX-ACCESS          read-create

   STATUS              current

   DESCRIPTION

       "The description of this FTN entry. Since the index for

        this table has no particular significance or meaning,

        this object should contain some meaningful text that an

        operator could use to further distinguish entries in

        this table."

   ::= { mplsFTNEntry 3 }

mplsFTNMask OBJECT-TYPE

   SYNTAX             BITS {

                       sourceAddr(0),

                       destAddr(1),

                       sourcePort(2),

                       destPort(3),

                       protocol(4),

                       dscp(5)

                      }

   MAX-ACCESS          read-create

   STATUS              current

   DESCRIPTION

       "This bit map indicates which of the fields described

        next, namely source address range, destination address

        range, source port range, destination port range, IPv4

        Protocol field or IPv6 next-header field and

        Differentiated Services Code Point (DSCP) is active for

        this FTN entry. If a particular bit is set to zero then

        the corresponding field in the packet MUST be ignored

        for comparison purposes."

   ::= { mplsFTNEntry 4 }

mplsFTNAddrType OBJECT-TYPE

   SYNTAX             InetAddressType

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "This object determines the type of address contained in

        the source and destination address objects

        (mplsFTNSourceAddrMin, mplsFTNSourceAddrMax,

        mplsFTNDestAddrMin and mplsFTNDestAddrMax) of a

        conceptual row.

        This object MUST NOT be set to unknown(0) when

        mplsFTNMask has bit positions sourceAddr(0) or

        destAddr(1) set to one.

        When both these bit positions of mplsFTNMask are set to

        zero the value of mplsFTNAddrType SHOULD be set to

        unknown(0) and the corresponding source and destination

        address objects SHOULD be set to zero-length strings."

   ::= { mplsFTNEntry 5 }

mplsFTNSourceAddrMin OBJECT-TYPE

   SYNTAX             InetAddress

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "The lower end of the source address range. The type of

        this object is determined by the corresponding

        mplsFTNAddrType object."

   ::= { mplsFTNEntry 6 }

mplsFTNSourceAddrMax OBJECT-TYPE

   SYNTAX             InetAddress

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "The upper end of the source address range. The type of

        this object is determined by the corresponding

        mplsFTNAddrType object."

   ::= { mplsFTNEntry 7 }

mplsFTNDestAddrMin OBJECT-TYPE

   SYNTAX             InetAddress

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "The lower end of the destination address range. The

        type of this object is determined by the corresponding

        mplsFTNAddrType object."

   ::= { mplsFTNEntry 8 }

mplsFTNDestAddrMax OBJECT-TYPE

   SYNTAX             InetAddress

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "The higher end of the destination address range. The

        type of this object is determined by the corresponding

        mplsFTNAddrType object."

   ::= { mplsFTNEntry 9 }

mplsFTNSourcePortMin OBJECT-TYPE

   SYNTAX             InetPortNumber

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "The lower end of the source port range."

   DEFVAL { 0 }

   ::= { mplsFTNEntry 10 }

mplsFTNSourcePortMax OBJECT-TYPE

   SYNTAX             InetPortNumber

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "The higher end of the source port range "

   DEFVAL { 65535 }

   ::= { mplsFTNEntry 11 }

mplsFTNDestPortMin OBJECT-TYPE

   SYNTAX             InetPortNumber

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "The lower end of the destination port range."

   DEFVAL { 0 }

   ::= { mplsFTNEntry 12 }

mplsFTNDestPortMax OBJECT-TYPE

   SYNTAX             InetPortNumber

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "The higher end of the destination port range."

   DEFVAL { 65535 }

   ::= { mplsFTNEntry 13 }

mplsFTNProtocol OBJECT-TYPE

   SYNTAX             Integer32 (0..255)

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "The IP protocol to match against the IPv4 protocol

        number or IPv6 Next-Header number in the packet. A

        value of 255 means match all.  Note that the protocol

        number of 255 is reserved by IANA, and Next-Header

        number of 0 is used in IPv6."

   DEFVAL { 255 }

   ::= { mplsFTNEntry 14 }

mplsFTNDscp OBJECT-TYPE

   SYNTAX             Dscp

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "The contents of the DSCP field."

   REFERENCE

       "Nichols, K., Blake, S., Baker, F. and D. Black,

        Definition of the Differentiated Services Field (DS

        Field) in the IPv4 and IPv6 Headers, RFC 2474, December

        1998."

   ::= { mplsFTNEntry 15 }

mplsFTNActionType OBJECT-TYPE

   SYNTAX    INTEGER {

                redirectLsp(1),   -- redirect into LSP

                redirectTunnel(2) -- redirect into tunnel

             }

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "The type of action to be taken on packets matching this

        FTN entry."

   ::= { mplsFTNEntry 16 }

mplsFTNActionPointer OBJECT-TYPE

   SYNTAX             RowPointer

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "If mplsFTNActionType is redirectLsp(1), then this

        object MUST contain zeroDotZero or point to a instance

        of mplsXCEntry indicating the LSP to redirect matching

        packets to.

        If mplsFTNActionType is redirectTunnel(2), then this

        object MUST contain zeroDotZero or point to a instance

        of mplsTunnelEntry indicating the MPLS TE tunnel to

        redirect matching packets to.

        If this object points to a conceptual row instance in a

        table consistent with mplsFTNActionType but this

        instance does not currently exist then no action will

        be taken on packets matching such an FTN entry till

        this instance comes into existence.

        If this object contains zeroDotZero then no action will

        be taken on packets matching such an FTN entry till it

        is populated with a valid pointer consistent with the

        value of mplsFTNActionType as explained above."

   ::= { mplsFTNEntry 17 }

mplsFTNStorageType OBJECT-TYPE

   SYNTAX             StorageType

   MAX-ACCESS         read-create

   STATUS             current

   DESCRIPTION

       "The storage type for this FTN entry. Conceptual rows

        having the value 'permanent' need not allow write-

        access to any columnar objects in the row."

   DEFVAL { nonVolatile }

   ::= { mplsFTNEntry 18 }

-- End of mplsFTNTable.

-- Last time an object in mplsFTNMapTable changed.

mplsFTNMapTableLastChanged OBJECT-TYPE

   SYNTAX              TimeStamp

   MAX-ACCESS          read-only

   STATUS              current

   DESCRIPTION

       "Indicates the last time an entry was added, deleted or

        modified in mplsFTNMapTable. Management stations should

        consult this object to determine if the table requires

        their attention.  This object is particularly useful

        for applications performing a retrieval on

        mplsFTNMapTable to ensure that the table is not

        modified during the retrieval operation."

   ::=  { mplsFTNObjects 4 }

-- FTN to interface mapping table.

mplsFTNMapTable OBJECT-TYPE

   SYNTAX              SEQUENCE OF MplsFTNMapEntry

   MAX-ACCESS          not-accessible

   STATUS              current

   DESCRIPTION

       "This table contains objects which provide the

        capability to apply or map FTN rules as defined by

        entries in mplsFTNTable to specific interfaces in the

        system.  FTN rules are compared with incoming packets

        in the order in which they are applied on an interface.

        The indexing structure of mplsFTNMapTable is as

        follows.

        - mplsFTNMapIndex indicates the interface to which the

          rule is being applied.  A value of 0 represents the

          application of the rule to all interfaces.

        - mplsFTNMapPrevIndex specifies the rule on the

          interface prior to the one being applied.  A value of

          0 specifies that the rule is being inserted at the

          head of the list of rules currently applied to the

          interface.

        - mplsFTNMapCurrIndex is the index in mplsFTNTable

          corresponding to the rule being applied.

        This indexing structure makes the entries in the table

        behave like items in a linked-list.  The object

        mplsFTNMapPrevIndex in each conceptual row is a pointer

        to the previous entry that is applied to a particular

        interface.  This allows a new entry to be 'inserted' at

        an arbitrary position in a list of entries currently

        applied to an interface.  This object is self-

        adjusting, i.e., its value is automatically adjusted by

        the agent, if necessary, after an insertion or deletion

        operation.

        Using this linked-list structure, one can retrieve FTN

        entries in the order of application on a per-interface

        basis as follows:

        - To determine the first FTN entry on an interface

          with index ifIndex perform a GETNEXT retrieval

          operation on mplsFTNMapRowStatus.ifIndex.0.0; the

          returned object, if one exists, is (say)

          mplsFTNMapRowStatus.ifIndex.0.n (mplsFTNMapRowStatus

          is the first accessible columnar object in the

          conceptual row). Then the index of the first FTN

          entry applied on this interface is n.

        - To determine the FTN entry applied to an interface

          after the one indexed by n perform a GETNEXT

          retrieval operation on

          mplsFTNMapRowStatus.ifIndex.n.0.  If such an entry

          exists the returned object would be of the form

          mplsFTNMapRowStatus.ifIndex.n.m.  Then the index of

          the next FTN entry applied on this interface is m.

        - If the FTN entry indexed by n is the last entry

          applied to the interface with index ifIndex then the

          object returned would either be:

          1.mplsFTNMapRowStatus.ifIndexNext.0.k, where

            ifIndexNext is the index of the next interface in

            ifTable to which an FTN entry has been applied, in

            which case k is the index of the first FTN entry

            applied to the interface with index ifIndexNext;

          or:

          2.mplsFTNMapStorageType.firstIfIndex.0.p, if there

            are no more entries in mplsFTNMapTable, where

            firstIfIndex is the first entry in ifTable to

            which an FTN entry has been mapped.

        Use the above steps to retrieve all the applied FTN

        entries on a per-interface basis in application order.

        Note that the number of retrieval operations is the

        same as the number of applied FTN entries (i.e., the

        minimum number of GETNEXT operations needed using any

        indexing scheme).

        Agents MUST NOT allow the same FTN entry as specified

        by mplsFTNMapCurrIndex to be applied multiple times to

        the same interface.

        Agents MUST NOT allow the creation of rows in this

        table until the corresponding rows are created in the

        mplsFTNTable.

        If a row in mplsFTNTable is destroyed, the agent MUST

        destroy the corresponding entries (i.e., ones with a

        matching value of mplsFTNCurrIndex) in this table as

        well."

   ::=  { mplsFTNObjects 5 }

mplsFTNMapEntry OBJECT-TYPE

   SYNTAX              MplsFTNMapEntry

   MAX-ACCESS          not-accessible

   STATUS              current

   DESCRIPTION

       "Each conceptual row represents the application of an

        FTN rule at a specific position in the list of FTN

        rules applied on an interface. "

   INDEX {

         mplsFTNMapIndex,

         mplsFTNMapPrevIndex,

         mplsFTNMapCurrIndex

   }

   ::=  { mplsFTNMapTable 1 }

MplsFTNMapEntry  ::=  SEQUENCE {

      mplsFTNMapIndex       InterfaceIndexOrZero,

      mplsFTNMapPrevIndex    MplsFTNEntryIndexOrZero,

      mplsFTNMapCurrIndex    MplsFTNEntryIndex,

      mplsFTNMapRowStatus    RowStatus,

      mplsFTNMapStorageType  StorageType

   }

mplsFTNMapIndex OBJECT-TYPE

   SYNTAX              InterfaceIndexOrZero

   MAX-ACCESS          not-accessible

   STATUS              current

   DESCRIPTION

       "The interface index that this FTN entry is being

        applied to. A value of zero indicates an entry that is

        applied all interfaces.

        Entries mapped to an interface by specifying its (non-

        zero) interface index in mplsFTNMapIndex are applied

        ahead of entries with mplsFTNMapIndex equal to zero."

   ::= { mplsFTNMapEntry 1 }

mplsFTNMapPrevIndex OBJECT-TYPE

   SYNTAX              MplsFTNEntryIndexOrZero

   MAX-ACCESS          not-accessible

   STATUS              current

   DESCRIPTION

       "The index of the previous FTN entry that was applied to

        this interface. The special value zero indicates that

        this should be the first FTN entry in the list."

   ::=  { mplsFTNMapEntry 2 }

mplsFTNMapCurrIndex OBJECT-TYPE

   SYNTAX              MplsFTNEntryIndex

   MAX-ACCESS          not-accessible

   STATUS              current

   DESCRIPTION

       "Index of the current FTN entry that is being applied to

        this interface."

   ::=  { mplsFTNMapEntry 3 }

mplsFTNMapRowStatus OBJECT-TYPE

   SYNTAX              RowStatus {

                             active(1),

                             createAndGo(4),

                             destroy(6)

                          }

   MAX-ACCESS          read-create

   STATUS              current

   DESCRIPTION

       "Used for controlling the creation and deletion of this

        row.

        All writable objects in this row may be modified at any

        time.

        If a conceptual row in mplsFTNMapTable points to a

        conceptual row in mplsFTNTable which is subsequently

        deleted, the corresponding conceptual row in

        mplsFTNMapTable MUST also be deleted by the agent."

   ::=  { mplsFTNMapEntry 4 }

mplsFTNMapStorageType OBJECT-TYPE

   SYNTAX              StorageType

   MAX-ACCESS          read-create

   STATUS              current

   DESCRIPTION

       "The storage type for this entry.  Conceptual rows

        having the value 'permanent' need not allow write-

        access to any columnar objects in this row."

   DEFVAL { nonVolatile }

   ::= { mplsFTNMapEntry 5 }

-- End of mplsFTNMapTable

-- FTN entry performance table

mplsFTNPerfTable OBJECT-TYPE

   SYNTAX              SEQUENCE OF MplsFTNPerfEntry

   MAX-ACCESS          not-accessible

   STATUS              current

   DESCRIPTION

       "This table contains performance statistics on FTN

        entries on a per-interface basis."

   ::= { mplsFTNObjects 6 }

mplsFTNPerfEntry OBJECT-TYPE

   SYNTAX              MplsFTNPerfEntry

   MAX-ACCESS          not-accessible

   STATUS              current

   DESCRIPTION

       "Each entry contains performance information for the

        specified interface and an FTN entry mapped to this

        interface."

   INDEX  { mplsFTNPerfIndex, mplsFTNPerfCurrIndex }

   ::=  { mplsFTNPerfTable 1 }

MplsFTNPerfEntry  ::=  SEQUENCE {

      mplsFTNPerfIndex                     InterfaceIndexOrZero,

      mplsFTNPerfCurrIndex                 MplsFTNEntryIndex,

      mplsFTNPerfMatchedPackets            Counter64,

      mplsFTNPerfMatchedOctets             Counter64,

      mplsFTNPerfDiscontinuityTime         TimeStamp

   }

mplsFTNPerfIndex OBJECT-TYPE

   SYNTAX              InterfaceIndexOrZero

   MAX-ACCESS          not-accessible

   STATUS              current

   DESCRIPTION

       "The interface index of an interface that an FTN entry

        has been applied/mapped to.  Each instance of this

        object corresponds to an instance of mplsFTNMapIndex."

   ::= { mplsFTNPerfEntry 1 }

mplsFTNPerfCurrIndex OBJECT-TYPE

   SYNTAX              MplsFTNEntryIndex

   MAX-ACCESS          not-accessible

   STATUS              current

   DESCRIPTION

       "Index of an FTN entry that has been applied/mapped to

        the specified interface.  Each instance of this object

        corresponds to an instance of mplsFTNMapCurrIndex."

   ::=  { mplsFTNPerfEntry 2 }

mplsFTNPerfMatchedPackets OBJECT-TYPE

   SYNTAX              Counter64

   MAX-ACCESS          read-only

   STATUS              current

   DESCRIPTION

       "Number of packets that matched the specified FTN entry

        if it is applied/mapped to the specified interface.

        Discontinuities in the value of this counter can occur

        at re-initialization of the management system, and at

        other times as indicated by the value of

        mplsFTNDiscontinuityTime."

   ::= { mplsFTNPerfEntry 3 }

mplsFTNPerfMatchedOctets OBJECT-TYPE

   SYNTAX              Counter64

   MAX-ACCESS          read-only

   STATUS              current

   DESCRIPTION

       "Number of octets that matched the specified FTN entry

        if it is applied/mapped to the specified interface.

        Discontinuities in the value of this counter can occur

        at re-initialization of the management system, and at

        other times as indicated by the value of

        mplsFTNDiscontinuityTime."

   ::= { mplsFTNPerfEntry 4 }

mplsFTNPerfDiscontinuityTime OBJECT-TYPE

   SYNTAX              TimeStamp

   MAX-ACCESS          read-only

   STATUS              current

   DESCRIPTION

       "The value of sysUpTime on the most recent occasion at

        which any one or more of this entry's counters suffered

        a discontinuity.  If no such discontinuities have

        occurred since the last re-initialization of the local

        management subsystem, then this object contains a zero

        value."

   ::= { mplsFTNPerfEntry 5 }

-- End of mplsFTNPerfTable

-- Module compliance.

-- Top level object IDs.

mplsFTNGroups

   OBJECT IDENTIFIER ::= { mplsFTNConformance 1 }

mplsFTNCompliances

   OBJECT IDENTIFIER ::= { mplsFTNConformance 2 }

-- Compliance requirement for fully compliant implementations.

mplsFTNModuleFullCompliance MODULE-COMPLIANCE

   STATUS current

   DESCRIPTION

       "Compliance statement for agents that provide full

        support for MPLS-FTN-STD-MIB."

   MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863.

   MANDATORY-GROUPS {

      ifGeneralInformationGroup,

      ifCounterDiscontinuityGroup

   }

   MODULE -- This module.

   MANDATORY-GROUPS {

      mplsFTNRuleGroup,

      mplsFTNMapGroup,

      mplsFTNPerfGroup

   }

   OBJECT mplsFTNAddrType

   SYNTAX InetAddressType { ipv4(1), ipv6(2) }

   DESCRIPTION

       "An implementation is only required to support IPv4

        and/or IPv6 addresses.  An implementation is only

        required to support the address types that are actually

        supported on the LSR."

   OBJECT mplsFTNSourceAddrMin

   SYNTAX       InetAddress (SIZE (4 | 20))

   DESCRIPTION

       "An implementation is only required to support IPv4

        and/or IPv6 addresses.  An implementation is only

        required to support the address types that are actually

        supported on the LSR."

   OBJECT mplsFTNSourceAddrMax

   SYNTAX       InetAddress (SIZE (4 | 20))

   DESCRIPTION

       "An implementation is only required to support IPv4

        and/or IPv6 addresses.  An implementation is only

        required to support the address types that are actually

        supported on the LSR."

   OBJECT mplsFTNDestAddrMin

   SYNTAX       InetAddress (SIZE (4 | 20))

   DESCRIPTION

       "An implementation is only required to support IPv4

        and/or IPv6 addresses.  An implementation is only

        required to support the address types that are actually

        supported on the LSR."

   OBJECT mplsFTNDestAddrMax

   SYNTAX       InetAddress (SIZE (4 | 20))

   DESCRIPTION

       "An implementation is only required to support IPv4

        and/or IPv6 addresses.  An implementation is only

        required to support the address types that are actually