FRSLD-MIB DEFINITIONS ::= BEGIN

IMPORTS

    MODULE-IDENTITY, OBJECT-TYPE,

    Counter32, Gauge32, Integer32,

    Counter64, TimeTicks, mib-2             FROM SNMPv2-SMI

    CounterBasedGauge64                     FROM HCNUM-TC

    TEXTUAL-CONVENTION, RowStatus,

    TimeStamp                               FROM SNMPv2-TC

    MODULE-COMPLIANCE, OBJECT-GROUP         FROM SNMPv2-CONF

    ifIndex                                 FROM IF-MIB

    DLCI                                    FROM FRAME-RELAY-DTE-MIB;

    frsldMIB MODULE-IDENTITY

        LAST-UPDATED "200201030000Z" -- January 3, 2002

        ORGANIZATION "IETF Frame Relay Service MIB Working Group"

        CONTACT-INFO

          "IETF Frame Relay Service MIB (frnetmib) Working Group

           WG Charter:    http://www.ietf.org/html.charters/

                                 frnetmib-charter.html

           WG-email:      frnetmib@sunroof.eng.sun.com

           Subscribe:     frnetmib-request@sunroof.eng.sun.com

           Email Archive: ftp://ftp.ietf.org/ietf-mail-archive/frnetmib

           Chair:      Andy Malis

                       Vivace Networks

           Email:      Andy.Malis@vivacenetworks.com

           WG editor:  Robert Steinberger

                       Paradyne Networks and

                       Fujitsu Network Communications

           Email:      robert.steinberger@fnc.fujitsu.com

           Co-author:  Orly Nicklass

                       RAD Data Communications Ltd.

           EMail:      Orly_n@rad.co.il"

        DESCRIPTION

            "The MIB module to describe generic objects for

             FRF.13 Frame Relay Service Level Definitions."

        REVISION "200201030000Z" -- January 3, 2002

        DESCRIPTION

            "Initial version, published as RFC 3202"

        ::= { mib-2 95 }

    --

    -- Textual Conventions

    --

    FrsldTxRP ::= TEXTUAL-CONVENTION

        STATUS  current

        DESCRIPTION

            "The reference point a PVC uses for calculation

             of transmitter related statistics.

             The valid values for this type of object are as follows:

               - srcLocalRP(1) for the local source

               - ingTxLocalRP(2) for the local ingress queue input

               - tpTxLocalRP(3) for the local traffic policing

               - eqiTxLocalRP(4) for the local egress queue input

               - eqoTxLocalRP(5) for the local egress queue output

               - otherTxLocalRP(6) for any other local transmit point

               - srcRemoteRP(7) for the remote source

               - ingTxLocalRP(8) for the remote ingress queue input

               - tpTxLocalRP(9) for the remote traffic policing

               - eqiTxRemoteRP(10) for the remote egress queue input

               - eqoTxRemoteRP(11) for the remote egress queue output

               - otherTxRemoteRP(12) for any other remote xmit point"

        REFERENCE

            "FRF.13: Section 2.3"

        SYNTAX      INTEGER {

                      srcLocalRP(1),

                      ingTxLocalRP(2),

                      tpTxLocalRP(3),

                      eqiTxLocalRP(4),

                      eqoTxLocalRP(5),

                      otherTxLocalRP(6),

                      srcRemoteRP(7),

                      ingTxRemoteRP(8),

                      tpTxRemoteRP(9),

                      eqiTxRemoteRP(10),

                      eqoTxRemoteRP(11),

                      otherTxRemoteRP(12)

                    }

    FrsldRxRP ::= TEXTUAL-CONVENTION

        STATUS      current

        DESCRIPTION

            "The reference point a PVC uses for calculation

             of receiver related statistics.

             The valid values for this object are as follows:

               - desLocalRP(1) for the local destination

               - ingRxLocalRP(2) for the local ingress queue input

               - tpRxLocalRP(3) for the local traffic policing

               - eqiRxLocalRP(4) for the local egress queue input

               - eqoRxLocalRP(5) for the local egress queue output

               - otherRxLocalRP(6) for any other local receive point

               - desRemoteRP(7) for the remote destination

               - ingRxRemoteRP(8) for the remote ingress input

               - tpRxRemoteRP(9) for the remote traffic policing

               - eqiRxRemoteRP(10) for the remote egress queue input

               - eqoRxRemoteRP(11) for the remote egress queue output

               - otherRxRemoteRP(12) for any other remote receive point"

        REFERENCE

            "FRF.13: Section 2.3"

        SYNTAX      INTEGER {

                      desLocalRP(1),

                      ingRxLocalRP(2),

                      tpRxLocalRP(3),

                      eqiRxLocalRP(4),

                      eqoRxLocalRP(5),

                      otherRxLocalRP(6),

                      desRemoteRP(7),

                      ingRxRemoteRP(8),

                      tpRxRemoteRP(9),

                      eqiRxRemoteRP(10),

                      eqoRxRemoteRP(11),

                      otherRxRemoteRP(12)

                    }

    --

    -- Base Objects

    ---

    frsldObjects      OBJECT IDENTIFIER ::= { frsldMIB 1 }

    frsldCapabilities OBJECT IDENTIFIER ::= { frsldMIB 2 }

    frsldConformance  OBJECT IDENTIFIER ::= { frsldMIB 3 }

    -- The Frame Relay Service Level Definitions PVC Control Table

    --

    -- This table is used to define and display the parameters of

    -- service level definitions on individual PVCs.

    frsldPvcCtrlTable  OBJECT-TYPE

        SYNTAX      SEQUENCE OF FrsldPvcCtrlEntry

        MAX-ACCESS  not-accessible

        STATUS      current

        DESCRIPTION

            "The Frame Relay Service Level Definitions

             PVC control table."

        ::= { frsldObjects 1 }

    frsldPvcCtrlEntry OBJECT-TYPE

        SYNTAX      FrsldPvcCtrlEntry

        MAX-ACCESS  not-accessible

        STATUS      current

        DESCRIPTION

            "An entry in the Frame Relay Service Level

             Definitions PVC control table."

        INDEX    { ifIndex, frsldPvcCtrlDlci,

                   frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP}

        ::= { frsldPvcCtrlTable 1 }

    FrsldPvcCtrlEntry ::=

        SEQUENCE {

            --

            -- Index Control Variables

            --

            frsldPvcCtrlDlci                DLCI,

            frsldPvcCtrlTransmitRP          FrsldTxRP,

            frsldPvcCtrlReceiveRP           FrsldRxRP,

            frsldPvcCtrlStatus              RowStatus,

            --

            -- Service Level Definitions Setup Variables

            --

            frsldPvcCtrlPacketFreq          Integer32,

            --

            -- Delay Specific Setup Variables

            --

            frsldPvcCtrlDelayFrSize         Integer32,

            frsldPvcCtrlDelayType           INTEGER,

            frsldPvcCtrlDelayTimeOut        Integer32,

            --

            -- Data Persistence Control Variables

            --

            frsldPvcCtrlPurge               Integer32,

            frsldPvcCtrlDeleteOnPurge       INTEGER,

            frsldPvcCtrlLastPurgeTime       TimeStamp

        }

    frsldPvcCtrlDlci OBJECT-TYPE

        SYNTAX      DLCI

        MAX-ACCESS  not-accessible

        STATUS      current

        DESCRIPTION

            "The value of this object is equal to the DLCI

             value for this PVC."

        ::= { frsldPvcCtrlEntry 1 }

    frsldPvcCtrlTransmitRP OBJECT-TYPE

        SYNTAX      FrsldTxRP

        MAX-ACCESS  not-accessible

        STATUS      current

        DESCRIPTION

            "The reference point this PVC uses for calculation

             of transmitter related statistics.  This object

             together with frsldPvcCtrlReceiveRP define the

             measurement domain."

        REFERENCE

            "FRF.13: Section 2.3"

        ::= { frsldPvcCtrlEntry 2 }

    frsldPvcCtrlReceiveRP OBJECT-TYPE

        SYNTAX      FrsldRxRP

        MAX-ACCESS  not-accessible

        STATUS      current

        DESCRIPTION

            "The reference point this PVC uses for calculation

             of receiver related statistics.  This object

             together with frsldPvcCtrlTransmitRP define the

             measurement domain."

        ::= { frsldPvcCtrlEntry 3 }

    frsldPvcCtrlStatus OBJECT-TYPE

        SYNTAX      RowStatus

        MAX-ACCESS  read-create

        STATUS      current

        DESCRIPTION

            "The status of the current row.  This object is

             used to add, delete, and disable rows in this

             table.  When the status changes to active(1) for the

             first time, a row will also be added to the data

             table below.  This row SHOULD not be removed until

             the status is changed to deleted.

             When this object is set to destroy(6), all associated

             sample and data table rows will also be deleted.

             When this object is changed from active(1) to any

             other valid value, the defined purge behavior will

             affect the data and sample tables.

             The rows added to this table MUST have a valid

             ifIndex and an ifType related to frame relay.  Further,

             the reference points referred to by frsldPvcCtrlTransmitRP

             and frsldPvcCtrlReceiveRP MUST be supported (see the

             frsldRPCaps object).

             If at any point the row is not in the active(1) state

             and the DLCI no longer exists, the state SHOULD

             report notReady(3).

             The data in this table SHOULD persist through power

             cycles.  The symantics of readiness for the rows still

             applies.  This means that it is possible for a row to be

             reprovisioned as notReady(3) if the underlying DLCI does

             not persist."

        ::= { frsldPvcCtrlEntry 4 }

    frsldPvcCtrlPacketFreq OBJECT-TYPE

        SYNTAX      Integer32 (0..3600)

        UNITS       "seconds"

        MAX-ACCESS  read-create

        STATUS      current

        DESCRIPTION

            "The frequency in seconds between initiation of

             specialized packets used to collect delay and / or

             delivery information as supported by the device.

             A value of zero indicates that no packets will

             be sent."

        DEFVAL { 60 }

        ::= { frsldPvcCtrlEntry 5 }

    frsldPvcCtrlDelayFrSize OBJECT-TYPE

        SYNTAX      Integer32 (1..8188)

        UNITS       "octets"

        MAX-ACCESS  read-create

        STATUS      current

        DESCRIPTION

            "The size of the payload in the frame used for

             calculation of network delay."

        DEFVAL { 128 }

        ::= { frsldPvcCtrlEntry 6 }

    frsldPvcCtrlDelayType OBJECT-TYPE

        SYNTAX      INTEGER {

                      oneWay(1),

                      roundTrip(2)

                    }

        MAX-ACCESS  read-create

        STATUS      current

        DESCRIPTION

                "The type of delay measurement performed."

        REFERENCE

            "FRF.13: Section 3"

        ::= { frsldPvcCtrlEntry 7 }

    frsldPvcCtrlDelayTimeOut OBJECT-TYPE

        SYNTAX      Integer32 (1..3600)

        UNITS       "seconds"

        MAX-ACCESS  read-create

        STATUS      current

        DESCRIPTION

            "A delay frame will count as a missed poll if

             it is not updated in the time specified by

             frsldPvcCtrlDelayTimeOut."

        DEFVAL { 60 }

        ::= { frsldPvcCtrlEntry 8 }

    frsldPvcCtrlPurge OBJECT-TYPE

        SYNTAX      Integer32 (0..172800) -- up to 48 hours

        UNITS       "seconds"

        MAX-ACCESS  read-create

        STATUS      current

        DESCRIPTION

            "This object defines the amount of time the device

             will wait, after discovering that a DLCI does not exist,

             the DLCI was deleted or the value of frsldPvcCtrlStatus

             changes from active(1) to either notInService(2) or

             notReady(3), prior to automatically purging the history

             in the sample tables and resetting the data in the data

             tables to all zeroes.  If frsldPvcCtrlStatus is manually

             set to destroy(6), this object does not apply."

        DEFVAL { 0 }

        ::= { frsldPvcCtrlEntry 9 }

    frsldPvcCtrlDeleteOnPurge OBJECT-TYPE

        SYNTAX      INTEGER {

                      none(1),

                      sampleContols(2),

                      all(3)

                    }

        MAX-ACCESS  read-create

        STATUS      current

        DESCRIPTION

            "This object defines whether rows will

             automatically be deleted from the tables

             when the information is purged.

             - A value of none(1) indicates that no rows

               will deleted.  The last known values will

               be preserved.

             - A value of sampleControls(2) indicates

               that all associated sample control rows

               will be deleted.

             - A value of all(3) indicates that all

               associated rows SHOULD be deleted."

        DEFVAL { all }

        ::= { frsldPvcCtrlEntry 10 }

    frsldPvcCtrlLastPurgeTime OBJECT-TYPE

        SYNTAX      TimeStamp

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "This object returns the value of sysUpTime

             at the time the information was last purged.

             This value SHOULD be set to the sysUpTime

             upon setting frsldPvcCtrlStatus to active(1)

             for the first time.  Each time a

             discontinuity in the counters occurs, this

             value MUST be set to the sysUpTime.

             If frsldPvcCtrlStatus has never been active(1),

             this object SHOULD return 0.

             This object SHOULD be used as the discontinuity

             timer for the counters in frsldPvcDataTable."

        ::= { frsldPvcCtrlEntry 11 }

    -- The Frame Relay Service Level Definitions Sampling Control

    -- Table

    --

    -- This table is used to define the sample control parameters

    -- of service level definitions on individual PVCs.

    frsldSmplCtrlTable  OBJECT-TYPE

        SYNTAX      SEQUENCE OF FrsldSmplCtrlEntry

        MAX-ACCESS  not-accessible

        STATUS      current

        DESCRIPTION

            "The Frame Relay Service Level Definitions

             sampling control table."

        ::= { frsldObjects 2 }

    frsldSmplCtrlEntry OBJECT-TYPE

        SYNTAX      FrsldSmplCtrlEntry

        MAX-ACCESS  not-accessible

        STATUS      current

        DESCRIPTION

            "An entry in the Frame Relay Service Level

             Definitions sample control table."

        INDEX    { ifIndex, frsldPvcCtrlDlci,

                   frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP,

                   frsldSmplCtrlIdx }

        ::= { frsldSmplCtrlTable 1 }

    FrsldSmplCtrlEntry ::=

        SEQUENCE {

            --

            -- Index Control Variables

            --

            frsldSmplCtrlIdx                Integer32,

            frsldSmplCtrlStatus             RowStatus,

            --

            -- Collection Control Variables

            --

            frsldSmplCtrlColPeriod          Integer32,

            frsldSmplCtrlBuckets            Integer32,

            frsldSmplCtrlBucketsGranted     Integer32

        }

    frsldSmplCtrlIdx OBJECT-TYPE

        SYNTAX  Integer32 (1..256)

        MAX-ACCESS not-accessible

        STATUS  current

        DESCRIPTION

            "The unique index for this row in the

             sample control table."

        ::= { frsldSmplCtrlEntry 1 }

    frsldSmplCtrlStatus OBJECT-TYPE

        SYNTAX      RowStatus

        MAX-ACCESS  read-create

        STATUS      current

        DESCRIPTION

            "The status of the current row.  This object is

             used to add, delete, and disable rows in this

             table.  This row SHOULD NOT be removed until the

             status is changed to destroy(6).  When the status

             changes to active(1), the collection in the sample

             tables below will be activated.

             The rows added to this table MUST have a valid

             ifIndex, an ifType related to frame relay,

             frsldPvcCtrlDlci MUST exist for the specified

             ifIndex and frsldPvcCtrlStatus MUST have a

             value of active(1).

             The value of frsldPvcCtrlStatus MUST be active(1)

             to transition this object to active(1).  If

             the value of frsldPvcCtrlStatus becomes anything

             other than active(1) when the state of this object

             is not active(1), this object SHOULD be set to

             notReady(3).

             The data in this table SHOULD persist through power

             cycles.  The symantics of readiness for the rows still

             applies.  This means that it is possible for a row to be

             reprovisioned as notReady(3) if the underlying DLCI does

             not persist."

        ::= { frsldSmplCtrlEntry 2 }

    frsldSmplCtrlColPeriod OBJECT-TYPE

        SYNTAX      Integer32 (1..2147483647)

        UNITS       "seconds"

        MAX-ACCESS  read-create

        STATUS      current

        DESCRIPTION

            "The amount of time in seconds that defines a

             period of collection for the statistics.

             At the end of each period, the statistics will be

             sampled and a row is added to the sample table."

        ::= { frsldSmplCtrlEntry 3 }

    frsldSmplCtrlBuckets OBJECT-TYPE

        SYNTAX      Integer32 (1..65535)

        MAX-ACCESS  read-create

        STATUS      current

        DESCRIPTION

            "The number of discrete buckets over which the

             data statistics are sampled.

             When this object is created or modified, the device

             SHOULD attempt to set the frsldSmplCtrlBuckets-

             Granted to a value as close as is possible

             depending upon the implementation and the available

             resources."

        DEFVAL { 60 }

        ::= { frsldSmplCtrlEntry 4 }

    frsldSmplCtrlBucketsGranted OBJECT-TYPE

        SYNTAX      Integer32 (0..65535)

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of discrete buckets granted.  This

             object will return 0 until frsldSmplCtrlStatus is

             set to active(1).  At that time the buckets will be

             allocated depending upon implementation and

             available resources."

        ::= { frsldSmplCtrlEntry 5 }

    -- The Frame Relay Service Level Definitions PVC Data Table

    --

    -- This table contains the accumulated values of

    -- the collected data.  This table is the table that should

    -- be referenced by external polling mechanisms if time

    -- based polling be desired.

     frsldPvcDataTable  OBJECT-TYPE

        SYNTAX      SEQUENCE OF FrsldPvcDataEntry

        MAX-ACCESS  not-accessible

        STATUS      current

        DESCRIPTION

            "The Frame Relay Service Level Definitions

             data table.

             This table contains accumulated values of the

             collected data.  It is the table that should be

             referenced by external polling mechanisms if

             time based polling be desired."

        ::= { frsldObjects 3 }

    frsldPvcDataEntry OBJECT-TYPE

        SYNTAX      FrsldPvcDataEntry

        MAX-ACCESS  not-accessible

        STATUS      current

        DESCRIPTION

            "An entry in the Frame Relay Service Level

             Definitions data table."

        INDEX    { ifIndex, frsldPvcCtrlDlci,

                  frsldPvcCtrlTransmitRP, frsldPvcCtrlReceiveRP}

        ::= { frsldPvcDataTable 1 }

    FrsldPvcDataEntry ::=

        SEQUENCE {

            frsldPvcDataMissedPolls       Counter32,

            frsldPvcDataFrDeliveredC      Counter32,

            frsldPvcDataFrDeliveredE      Counter32,

            frsldPvcDataFrOfferedC        Counter32,

            frsldPvcDataFrOfferedE        Counter32,

            frsldPvcDataDataDeliveredC    Counter32,

            frsldPvcDataDataDeliveredE    Counter32,

            frsldPvcDataDataOfferedC      Counter32,

            frsldPvcDataDataOfferedE      Counter32,

            frsldPvcDataHCFrDeliveredC    Counter64,

            frsldPvcDataHCFrDeliveredE    Counter64,

            frsldPvcDataHCFrOfferedC      Counter64,

            frsldPvcDataHCFrOfferedE      Counter64,

            frsldPvcDataHCDataDeliveredC  Counter64,

            frsldPvcDataHCDataDeliveredE  Counter64,

            frsldPvcDataHCDataOfferedC    Counter64,

            frsldPvcDataHCDataOfferedE    Counter64,

            frsldPvcDataUnavailableTime   TimeTicks,

            frsldPvcDataUnavailables      Counter32

        }

    frsldPvcDataMissedPolls OBJECT-TYPE

        SYNTAX      Counter32

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The total number of polls that have been determined

             to be missed.  These polls are typically associated

             with the calculation of delay but may also be

             used for the calculation of other statistics.  If an

             anticipated poll is not received in a reasonable

             amount of time, it should be counted as missed.

             The value used to determine the reasonable amount

             of time is contained in frsldPvcCtrlDelayTimeOut.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        ::= { frsldPvcDataEntry 1 }

    frsldPvcDataFrDeliveredC OBJECT-TYPE

        SYNTAX      Counter32

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of frames that were received at

             frsldPvcCtrlReceiveRP and determined to have been

             sent within CIR.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 4.1 (FramesDeliveredc)"

        ::= { frsldPvcDataEntry 2 }

    frsldPvcDataFrDeliveredE OBJECT-TYPE

        SYNTAX      Counter32

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of frames that were received at

             frsldPvcCtrlReceiveRP and determined to have been

             sent in excess of the CIR.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 4.1 (FramesDeliverede)"

        ::= { frsldPvcDataEntry 3 }

    frsldPvcDataFrOfferedC OBJECT-TYPE

        SYNTAX      Counter32

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of frames that were offered through

             frsldPvcCtrlTransmitRP within CIR.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 4.1 (FramesOfferedc)"

        ::= { frsldPvcDataEntry 4 }

    frsldPvcDataFrOfferedE OBJECT-TYPE

        SYNTAX      Counter32

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of frames that were offered through

             frsldPvcCtrlTransmitRP in excess of the CIR.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 4.1 (FramesOfferede)"

        ::= { frsldPvcDataEntry 5 }

    frsldPvcDataDataDeliveredC OBJECT-TYPE

        SYNTAX      Counter32

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of octets that were received at

             frsldPvcCtrlReceiveRP and determined to have been

             sent within CIR.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 5.1 (DataDeliveredc)"

        ::= { frsldPvcDataEntry 6 }

    frsldPvcDataDataDeliveredE OBJECT-TYPE

        SYNTAX      Counter32

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of octets that were received at

             frsldPvcCtrlReceiveRP and determined to have been

             sent in excess of the CIR.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 5.1 (DataDeliverede)"

        ::= { frsldPvcDataEntry 7 }

    frsldPvcDataDataOfferedC OBJECT-TYPE

        SYNTAX      Counter32

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of octets that were offered through

             frsldPvcCtrlTransmitRP within CIR.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 5.1 (DataOfferedc)"

        ::= { frsldPvcDataEntry 8 }

    frsldPvcDataDataOfferedE OBJECT-TYPE

        SYNTAX      Counter32

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of octets that were offered through

             frsldPvcCtrlTransmitRP in excess of the CIR.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 5.1 (DataOfferede)"

        ::= { frsldPvcDataEntry 9 }

    frsldPvcDataHCFrDeliveredC OBJECT-TYPE

        SYNTAX      Counter64

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of frames that were received at

             frsldPvcCtrlReceiveRP and determined to have been

             sent within CIR.  This object is a 64-bit version

             of frsldPvcDataFrDeliveredC.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 4.1 (FramesDeliveredc)"

        ::= { frsldPvcDataEntry 10 }

    frsldPvcDataHCFrDeliveredE OBJECT-TYPE

        SYNTAX      Counter64

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of frames that were received at

             frsldPvcCtrlReceiveRP and determined to have been

             sent in excess of the CIR.  This object is a 64-bit

             version of frsldPvcDataFrDeliveredE.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 4.1 (FramesDeliverede)"

        ::= { frsldPvcDataEntry 11 }

    frsldPvcDataHCFrOfferedC OBJECT-TYPE

        SYNTAX      Counter64

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of frames that were offered through

             frsldPvcCtrlTransmitRP within CIR.  This object is

             a 64-bit version of frsldPvcDataFrOfferedC.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 4.1 (FramesOfferedc)"

        ::= { frsldPvcDataEntry 12 }

    frsldPvcDataHCFrOfferedE OBJECT-TYPE

        SYNTAX      Counter64

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of frames that were offered through

             frsldPvcCtrlTransmitRP in excess of the CIR.  This

             object is a 64-bit version of frsldPvcDataFrOfferedE.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 4.1 (FramesOfferede)"

        ::= { frsldPvcDataEntry 13 }

    frsldPvcDataHCDataDeliveredC OBJECT-TYPE

        SYNTAX      Counter64

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of octets that were received at

             frsldPvcCtrlReceiveRP and determined to have been

             sent within CIR.  This object is a 64-bit version of

             frsldPvcDataDataDeliveredC.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 5.1 (DataDeliveredc)"

        ::= { frsldPvcDataEntry 14 }

    frsldPvcDataHCDataDeliveredE OBJECT-TYPE

        SYNTAX      Counter64

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of octets that were received at

             frsldPvcCtrlReceiveRP and determined to have been

             sent in excess of the CIR.  This object is a 64-bit

             version of frsldPvcDataDataDeliveredE.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 5.1 (DataDeliverede)"

        ::= { frsldPvcDataEntry 15 }

    frsldPvcDataHCDataOfferedC OBJECT-TYPE

        SYNTAX      Counter64

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of octets that were offered through

             frsldPvcCtrlTransmitRP within CIR.  This object is

             a 64-bit version of frsldPvcDataDataOfferedC.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 5.1 (DataOfferedc)"

        ::= { frsldPvcDataEntry 16 }

    frsldPvcDataHCDataOfferedE OBJECT-TYPE

        SYNTAX      Counter64

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of octets that were offered through

             frsldPvcCtrlTransmitRP in excess of the CIR.

             This object is a 64-bit version of

             frsldPvcDataDataOfferedE.

             Discontinuities in the value of this counter can

             occur at re-initialization of the management system

             and at other times as indicated by

             frsldPvcCtrlLastPurgeTime."

        REFERENCE

            "FRF.13: Section 5.1 (DataOfferede)"

        ::= { frsldPvcDataEntry 17 }

    frsldPvcDataUnavailableTime OBJECT-TYPE

        SYNTAX      TimeTicks

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The amount of time this PVC was declared unavailable

             for any reason since this row was created."

        REFERENCE

            "FRF.13: Section 6.1 (OutageTime)"

        ::= { frsldPvcDataEntry 18 }

    frsldPvcDataUnavailables OBJECT-TYPE

        SYNTAX      Counter32

        MAX-ACCESS  read-only

        STATUS      current

        DESCRIPTION

            "The number of times this PVC was declared unavailable