FRNETSERV-MIB DEFINITIONS ::= BEGIN

IMPORTS

              MODULE-IDENTITY, OBJECT-TYPE,

              NOTIFICATION-TYPE, transmission,

              Counter32, Integer32             FROM SNMPv2-SMI

              TimeStamp, RowStatus             FROM SNMPv2-TC

              MODULE-COMPLIANCE, OBJECT-GROUP,

              NOTIFICATION-GROUP               FROM SNMPv2-CONF

              InterfaceIndex, ifIndex          FROM IF-MIB

              SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB;

        frnetservMIB MODULE-IDENTITY

            LAST-UPDATED "200009280000Z" -- September 28, 2000

            ORGANIZATION "IETF Frame Relay Service MIB Working Group"

            CONTACT-INFO

                "WG Charter:

                   http://www.ietf.org/html.charters/frnetmib-charter

                 WG-email:

                   frnetmib@sunroof.eng.sun.com

                 Subscribe:

                   frnetmib-request@sunroof.eng.sun.com

                 Email Archive:

                   ftp://ftp.ietf.org/ietf-mail-archive/frnetmib

                 Chair:      Andy Malis

                             Vivace Networks, Inc.

                 Email:      Andy.Malis@vivacenetworks.com

                 WG editor:  Kenneth Rehbehn

                             Megisto Systems, Inc.

                 Email:      krehbehn@megisto.com

                 Co-author:  David Fowler

                             Syndesis Limited,

                 EMail:      fowler@syndesis.com"

            DESCRIPTION

                 "The MIB module to describe generic objects for

                  Frame Relay Network Service."

            --

            -- Revision History

            --

            REVISION "200009280000Z"

            DESCRIPTION

                 "Published as RFC 2954.

                 The major new features of this revision include:

                     o  Support for read-write capability to

                        provision switch components providing service,

                     o  Support for cross-connection via a frame relay

                        to ATM service interworking function,

                     o  Support for frame relay fragmentation,

                     o  Additional frame counters to track frame

                        loss.

                 Refer to Appendix A for a comprehensive list of

                 changes since RFC 1604."

            REVISION "199311161200Z"

            DESCRIPTION

                 "Published as RFC 1604."

            ::= { transmission 44 }

            frnetservObjects

                OBJECT IDENTIFIER ::= { frnetservMIB 1 }

            frnetservTraps

                OBJECT IDENTIFIER ::= { frnetservMIB 2 }

            frnetservTrapsPrefix

                OBJECT IDENTIFIER ::= { frnetservTraps 0 }

        --

        -- The Frame Relay Service Logical Port

        --

        frLportTable OBJECT-TYPE

            SYNTAX      SEQUENCE OF FrLportEntry

            MAX-ACCESS  not-accessible

            STATUS      current

            DESCRIPTION

                    "The Frame Relay Logical Port Information table is

                    an interface-specific addendum to the generic

                    ifTable of the Interface MIB."

            ::= { frnetservObjects 1 }

        frLportEntry OBJECT-TYPE

            SYNTAX      FrLportEntry

            MAX-ACCESS  not-accessible

            STATUS      current

            DESCRIPTION

                    "An entry in the Frame Relay Logical Port

                    Information table."

            INDEX   {   ifIndex }

            ::= { frLportTable 1 }

        FrLportEntry ::=

            SEQUENCE {

                frLportNumPlan            INTEGER,

                frLportContact            SnmpAdminString,

                frLportLocation           SnmpAdminString,

                frLportType               INTEGER,

                frLportAddrDLCILen        INTEGER,

                frLportVCSigProtocol      INTEGER,

                frLportVCSigPointer       OBJECT IDENTIFIER,

                frLportDLCIIndexValue     Integer32,

                frLportTypeAdmin          INTEGER,

                frLportVCSigProtocolAdmin INTEGER,

                frLportFragControl        INTEGER,

                frLportFragSize           Integer32

        }

        frLportNumPlan OBJECT-TYPE

            SYNTAX      INTEGER {

                        other(1),

                        e164(2),

                        x121(3),

                        none(4)

                        }

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the network

                    address numbering plan for this UNI/NNI logical

                    port. The network address is the object

                    ifPhysAddress. The value none(4) implies that

                    there is no ifPhysAddress.  The FRS agent will

                    return an octet string of zero length for

                    ifPhysAddress.  The value other(1) means that an

                    address has been assigned to this interface, but

                    the numbering plan is not enumerated here."

            REFERENCE   "E.164 [29]

                         X.121 [30]"

            ::= { frLportEntry 1 }

        frLportContact  OBJECT-TYPE

            SYNTAX      SnmpAdminString

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the network

                    contact for this UNI/NNI logical port."

            ::= { frLportEntry 2 }

        frLportLocation OBJECT-TYPE

            SYNTAX      SnmpAdminString

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the frame

                    relay network location for this UNI/NNI logical

                    port."

            ::= { frLportEntry 3 }

        frLportType     OBJECT-TYPE

            SYNTAX      INTEGER {

                        uni(1),

                        nni(2)

                        }

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the type of

                    network interface for this logical port."

            ::= { frLportEntry 4 }

        frLportAddrDLCILen OBJECT-TYPE

            SYNTAX      INTEGER {

                        twoOctets10Bits(1),

                        threeOctets10Bits(2),

                        threeOctets16Bits(3),

                        fourOctets17Bits(4),

                        fourOctets23Bits(5)

                        }

            UNITS       "Octets"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the Q.922

                    Address field length and DLCI length for this

                    UNI/NNI logical port."

            REFERENCE   "Q.922 [25]"

            ::= { frLportEntry 5 }

        frLportVCSigProtocol OBJECT-TYPE

            SYNTAX      INTEGER {

                        none(1),

                        lmi(2),

                        ansiT1617D(3),

                        ansiT1617B(4),

                        ccittQ933A(5)

                        }

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the Local

                    In-Channel Signaling Protocol that is used for

                    this frame relay UNI/NNI logical port.

                    none(1):        Interface does not use a PVC

                                    signaling protocol

                    lmi(2):         Interface operates the Stratacom/

                                    Nortel/DEC Local Management

                                    Interface Specification protocol

                    ansiT1617D(3):  Interface operates the ANSI T1.617

                                    Annex D PVC status protocol

                      ansiT1617B(4):  Interface operates the ANSI

T1.617

                                      Annex B procedures

                      ccittQ933A(5):  Interface operates the ITU Q.933

                                      Annex A PVC status protocol"

              REFERENCE   "LMI [24]

                           T1.617 Annex D [17],

                           Q.933 Annex A [22]"

              ::= { frLportEntry 6 }

        frLportVCSigPointer OBJECT-TYPE

            SYNTAX      OBJECT IDENTIFIER

            MAX-ACCESS  read-only

            STATUS      deprecated

            DESCRIPTION

                    "The value of this object is used as a pointer to

                    the table that contains the Local In-Channel

                    Signaling Protocol parameters and errors for this

                    UNI/NNI logical port.

                    This object has been deprecated to reflect the

                    fact that the local in-channel signaling

                    parameters are accessed from a single table

                    (frMgtVCSigTable) that includes parameters for all

                    possible signaling protocols.  Early design

                    anticipated multiple tables, one for each

                    signaling protocol."

            ::= { frLportEntry 7 }

        frLportDLCIIndexValue OBJECT-TYPE

            SYNTAX      Integer32 (16..4194303)

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "This object contains a hint to be used for

                    frPVCEndptDLCIIndex when creating entries in the

                    frPVCEndptTable.  The SYNTAX of this object

                    matches the SYNTAX of the frPVCEndptDLCIIndex - an

                    object that is restricted to legal Q.922 DLCI

                    values for the size of the address field.

                    The value 0 indicates that no unassigned entries

                    are available.

                    To obtain the frPVCEndptDLCIIndex value for a new

                    entry, the manager issues a management protocol

                    retrieval operation to obtain the current value of

                    this object.  After each retrieval, the agent must

                    modify the value to the next unassigned index to

                    prevent assignment of the same value to multiple

                    management systems.

                    A management system should repeat the read to

                    obtain a new value should an attempt to create the

                    new row using the previously returned hint fail."

            REFERENCE   "Q.922 [25]"

            ::= { frLportEntry 8 }

        frLportTypeAdmin   OBJECT-TYPE

            SYNTAX      INTEGER {

                        uni(1),

                        nni(2)

                        }

            MAX-ACCESS  read-write

            STATUS      current

            DESCRIPTION

                    "The value of this object desired identifies the

                    type of network interface for this logical port."

              ::= { frLportEntry 9 }

        frLportVCSigProtocolAdmin OBJECT-TYPE

            SYNTAX      INTEGER {

                        none(1),

                        lmi(2),

                        ansiT1617D(3),

                        ansiT1617B(4),

                        ccittQ933A(5)

                        }

            MAX-ACCESS  read-write

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the desired

                    Local In-Channel Signaling Protocol that is used

                    for this frame relay UNI/NNI logical port.  This

                    value must be made the active protocol as soon as

                    possible on the device.

                    Refer to frLportVCSigProtocol for a description of

                    each signaling protocol choices."

            REFERENCE   "LMI [24]

                         T1.617 Annex D [17],

                         Q.933 Annex A [22]"

            ::= { frLportEntry 10 }

        frLportFragControl OBJECT-TYPE

            SYNTAX      INTEGER {

                        on(1),

                        off(2)

                        }

            MAX-ACCESS  read-write

            STATUS      current

            DESCRIPTION

                    "This object controls the transmission and

                    reception of fragmentation frames for this UNI or

                    NNI interface.

                    on(1)   Frames are fragmented using the interface

                            fragmentation format

                            Note:  The customer side of the interface

                            must also be configured to fragment

                            frames.

                    off(2)  Frames are not fragmented using the

                            interface fragmentation format."

            REFERENCE   "FRF.12 [21]"

            DEFVAL { off }

            ::= { frLportEntry 11 }

        frLportFragSize OBJECT-TYPE

            SYNTAX      Integer32 (0..4096)

            UNITS       "Octets"

            MAX-ACCESS  read-write

            STATUS      current

            DESCRIPTION

                    "The value of this object is the size in octets of

                    the maximum size of each fragment to be sent when

                    fragmenting.  This object is only used by the

                    fragmentation transmitter, and the two sides of

                    the interface may differ.  The fragment size

                    includes the octets for the frame relay header,

                    the UI octet, the NLPID, the fragmentation header,

                    and the fragment payload. If frLportFragControl is

                    set to off, this value should be zero."

            REFERENCE   "FRF.12 [21]"

            DEFVAL { 0 }

            ::= { frLportEntry 12 }

        --

        -- Frame Relay Management VC Signaling

        --

        frMgtVCSigTable OBJECT-TYPE

            SYNTAX      SEQUENCE OF FrMgtVCSigEntry

            MAX-ACCESS  not-accessible

            STATUS      current

            DESCRIPTION

                    "The Frame Relay Management VC Signaling

                    Parameters and Errors table."

            ::= { frnetservObjects 2 }

        frMgtVCSigEntry OBJECT-TYPE

            SYNTAX      FrMgtVCSigEntry

            MAX-ACCESS  not-accessible

            STATUS      current

            DESCRIPTION

                    "An entry in the Frame Relay Management VC

                    Signaling Parameters Errors table."

            INDEX       { ifIndex }

            ::= { frMgtVCSigTable 1 }

        FrMgtVCSigEntry ::=

            SEQUENCE {

                frMgtVCSigProced             INTEGER,

                frMgtVCSigUserN391           INTEGER,

                frMgtVCSigUserN392           INTEGER,

                frMgtVCSigUserN393           INTEGER,

                frMgtVCSigUserT391           INTEGER,

                frMgtVCSigNetN392            INTEGER,

                frMgtVCSigNetN393            INTEGER,

                frMgtVCSigNetT392            INTEGER,

                frMgtVCSigNetnN4             INTEGER,

                frMgtVCSigNetnT3             INTEGER,

                frMgtVCSigUserLinkRelErrors  Counter32,

                frMgtVCSigUserProtErrors     Counter32,

                frMgtVCSigUserChanInactive   Counter32,

                frMgtVCSigNetLinkRelErrors   Counter32,

                frMgtVCSigNetProtErrors      Counter32,

                frMgtVCSigNetChanInactive    Counter32,

                frMgtVCSigProcedAdmin        INTEGER,

                frMgtVCSigUserN391Admin      INTEGER,

                frMgtVCSigUserN392Admin      INTEGER,

                frMgtVCSigUserN393Admin      INTEGER,

                frMgtVCSigUserT391Admin      INTEGER,

                frMgtVCSigNetN392Admin       INTEGER,

                frMgtVCSigNetN393Admin       INTEGER,

                frMgtVCSigNetT392Admin       INTEGER,

                frMgtVCSigNetnT3Admin        INTEGER

        }

        frMgtVCSigProced OBJECT-TYPE

            SYNTAX      INTEGER {

                        u2nnet(1),

                        bidirect(2),

                        u2nuser(3)

                        }

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the local

                    in-channel signaling procedural role that is used

                    for this UNI/NNI logical port.  Bidirectional

                    procedures implies that both user-side and

                    network-side procedural roles are used.

                    u2nnet(1)   Logical port operates user to network

                                procedure in the role of the network

                                side

                    bidirect(2) Logical port operates the

                                bidirectional procedure (both user

                                and network side roles)

                    u2nuser(3)  Logical port operates user to network

                                procedure in the role of the user

                                side"

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17]"

            ::= { frMgtVCSigEntry 1 }

        frMgtVCSigUserN391 OBJECT-TYPE

            SYNTAX      INTEGER (1..255)

            UNITS       "Polls"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the User-side

                    N391 full status polling cycle value for this

                    UNI/NNI logical port.  If the logical port is not

                    performing user-side (bidirectional) procedures,

                    then this object is not instantiated and an

                    attempt to read will result in the noSuchInstance

                    exception response."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17]"

            DEFVAL { 6 }

            ::= { frMgtVCSigEntry 2 }

        frMgtVCSigUserN392 OBJECT-TYPE

            SYNTAX      INTEGER (1..10)

            UNITS       "Events"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the User-side

                    N392 error threshold value for this UNI/NNI

                    logical port.  If the logical port is not

                    performing user-side (bidirectional) procedures,

                    then this object is not instantiated."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17]"

            DEFVAL { 3 }

            ::= { frMgtVCSigEntry 3 }

        frMgtVCSigUserN393 OBJECT-TYPE

            SYNTAX      INTEGER (1..10)

            UNITS       "Events"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the User-side

                    N393 monitored events count value for this UNI/NNI

                    logical port.  If the logical port is not

                    performing user-side (bidirectional) procedures,

                    then this object is not instantiated."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17]"

            DEFVAL { 4 }

            ::= { frMgtVCSigEntry 4 }

        frMgtVCSigUserT391 OBJECT-TYPE

            SYNTAX      INTEGER (5..30)

            UNITS       "Seconds"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the User-side

                    T391 link integrity verification polling timer

                    value for this UNI/NNI logical port.  If the

                    logical port is not performing user-side

                    procedures, then this object is not instantiated."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17]"

            DEFVAL { 10 }

            ::= { frMgtVCSigEntry 5 }

        frMgtVCSigNetN392 OBJECT-TYPE

            SYNTAX      INTEGER (1..10)

            UNITS       "Events"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the Network-

                    side N392 error threshold value (nN2 for LMI) for

                    this UNI/NNI logical port.  If the logical port is

                    not performing network-side procedures, then this

                    object is not instantiated."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17],

                         LMI [24]"

            DEFVAL { 3 }

            ::= { frMgtVCSigEntry 6 }

        frMgtVCSigNetN393 OBJECT-TYPE

            SYNTAX      INTEGER (1..10)

            UNITS       "Events"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the Network-

                    side N393 monitored events count value (nN3 for

                    LMI) for this UNI/NNI logical port.  If the

                    logical port is not performing network-side

                    procedures, then this object is not instantiated."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17],

                         LMI [24]"

            DEFVAL { 4 }

            ::= { frMgtVCSigEntry 7 }

        frMgtVCSigNetT392 OBJECT-TYPE

            SYNTAX      INTEGER (5..30)

            UNITS       "Seconds"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the Network-

                    side T392 polling verification timer value (nT2

                    for LMI)  for this UNI/NNI logical port.  If the

                    logical port is not performing network-side

                    procedures, then this object is not instantiated."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17],

                         LMI [24]"

            DEFVAL { 15 }

            ::= { frMgtVCSigEntry 8 }

        frMgtVCSigNetnN4 OBJECT-TYPE

            SYNTAX      INTEGER (5..5)

            UNITS       "Events"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the Network-

                    side nN4 maximum status enquires received value

                    for this UNI/NNI logical port.  If the logical

                    port is not performing network-side procedures or

                    is not performing LMI procedures, then this object

                    is not instantiated.

                    This object applies only to LMI and always has a

                    value of 5."

            REFERENCE   "LMI [24]"

            ::= { frMgtVCSigEntry 9 }

        frMgtVCSigNetnT3 OBJECT-TYPE

            SYNTAX      INTEGER (5 | 10 | 15 | 20 | 25 | 30)

            UNITS       "Seconds"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the Network-

                    side nT3 timer (for nN4 status enquires received)

                    value for this UNI/NNI logical port.  If the

                    logical port is not performing network-side

                    procedures or is not performing LMI procedures,

                    then this object is not instantiated.

                      This object applies only to LMI."

              REFERENCE   "LMI [24]"

              DEFVAL { 20 }

              ::= { frMgtVCSigEntry 10 }

        frMgtVCSigUserLinkRelErrors OBJECT-TYPE

            SYNTAX      Counter32

            UNITS       "Errors"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The number of user-side local in-channel

                    signaling link reliability errors (i.e., non-

                    receipt of Status/Status Enquiry messages or

                    invalid sequence numbers in a Link Integrity

                    Verification Information Element) for this UNI/NNI

                    logical port.  If the logical port is not

                    performing user-side procedures, then this object

                    is not instantiated."

            ::= { frMgtVCSigEntry 11 }

        frMgtVCSigUserProtErrors OBJECT-TYPE

            SYNTAX      Counter32

            UNITS       "Errors"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The number of user-side local in-channel

                    signaling protocol errors (i.e., protocol

                    discriminator, unnumbered information, message

                    type, call reference, and mandatory information

                    element errors) for this UNI/NNI logical port. If

                    the logical port is not performing user-side

                    procedures, then this object is not instantiated."

            ::= { frMgtVCSigEntry 12 }

      frMgtVCSigUserChanInactive OBJECT-TYPE

          SYNTAX      Counter32

          UNITS       "Events"

          MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The number of times the user-side channel was

                    declared inactive (i.e., N392 errors in N393

                    events) for this UNI/NNI logical port. If the

                    logical port is not performing user-side

                    procedures, then this object is not instantiated."

            ::= { frMgtVCSigEntry 13 }

        frMgtVCSigNetLinkRelErrors OBJECT-TYPE

            SYNTAX      Counter32

            UNITS       "Errors"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The number of network-side local in-channel

                    signaling link reliability errors (i.e., non-

                    receipt of Status/Status Enquiry messages or

                    invalid sequence numbers in a Link Integrity

                    Verification Information Element) for this UNI/NNI

                    logical port."

            ::= { frMgtVCSigEntry 14 }

        frMgtVCSigNetProtErrors OBJECT-TYPE

            SYNTAX      Counter32

            UNITS       "Errors"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The number of network-side local in-channel

                    signaling protocol errors (i.e., protocol

                    discriminator, message type, call reference, and

                    mandatory information element errors) for this

                    UNI/NNI logical port."

            ::= { frMgtVCSigEntry 15 }

        frMgtVCSigNetChanInactive OBJECT-TYPE

            SYNTAX      Counter32

            UNITS       "Events"

            MAX-ACCESS  read-only

            STATUS      current

            DESCRIPTION

                    "The number of times the network-side channel was

                    declared inactive (i.e., N392 errors in N393

                    events) for this UNI/NNI logical port."

            ::= { frMgtVCSigEntry 16 }

        frMgtVCSigProcedAdmin OBJECT-TYPE

            SYNTAX      INTEGER {

                        u2nnet(1),

                        bidirect(2),

                        u2nuser(3)

                        }

            MAX-ACCESS  read-write

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the local

                    in-channel signaling procedural role that is used

                    for this UNI/NNI logical port.  Bidirectional

                    procedures implies that both user-side and

                    network-side procedural roles are used.

                    u2nnet(1)   Logical port operates user to network

                                procedure in the role of the network

                                side

                    bidirect(2) Logical port operates the

                                bidirectional procedure (both user

                                and network side roles)

                    u2nuser(3)  Logical port operates user to network

                                procedure in the role of the user

                                side"

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17]"

            DEFVAL { u2nnet }

            ::= { frMgtVCSigEntry 17 }

        frMgtVCSigUserN391Admin OBJECT-TYPE

            SYNTAX      INTEGER (1..255)

            UNITS       "Polls"

            MAX-ACCESS  read-write

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the desired

                    User-side N391 full status polling cycle value for

                    this UNI/NNI logical port.  If the logical port is

                    not performing user-side (bidirectional)

                    procedures, then this object is not instantiated."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17]"

            ::= { frMgtVCSigEntry 18 }

        frMgtVCSigUserN392Admin OBJECT-TYPE

            SYNTAX      INTEGER (1..10)

            UNITS       "Events"

            MAX-ACCESS  read-write

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the desired

                    User-side N392 error threshold value for this

                    UNI/NNI logical port.  If the logical port is not

                    performing user-side (bidirectional) procedures,

                    then this object is not instantiated."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17]"

            ::= { frMgtVCSigEntry 19 }

        frMgtVCSigUserN393Admin OBJECT-TYPE

            SYNTAX      INTEGER (1..10)

            UNITS       "Events"

            MAX-ACCESS  read-write

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the desired

                    User-side N393 monitored events count value for

                    this UNI/NNI logical port.  If the logical port is

                    not performing user-side (bidirectional)

                    procedures, then this object is not instantiated."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17]"

            ::= { frMgtVCSigEntry 20 }

        frMgtVCSigUserT391Admin OBJECT-TYPE

            SYNTAX      INTEGER (5..30)

            UNITS       "Seconds"

            MAX-ACCESS  read-write

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the desired

                    User-side T391 link integrity verification polling

                    timer value for this UNI/NNI logical port.  If the

                    logical port is not performing user-side

                    procedures, then this object is not instantiated."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17]"

            ::= { frMgtVCSigEntry 21 }

        frMgtVCSigNetN392Admin OBJECT-TYPE

            SYNTAX      INTEGER (1..10)

            UNITS       "Events"

            MAX-ACCESS  read-write

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the desired

                    Network-side N392 error threshold value (nN2 for

                    LMI) for this UNI/NNI logical port.  If the

                    logical port is not performing network-side

                    procedures, then this object is not instantiated."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17],

                         LMI [24]"

            ::= { frMgtVCSigEntry 22 }

        frMgtVCSigNetN393Admin OBJECT-TYPE

            SYNTAX      INTEGER (1..10)

            UNITS       "Events"

            MAX-ACCESS  read-write

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the desired

                    Network-side N393 monitored events count value

                    (nN3 for LMI) for this UNI/NNI logical port.  If

                    the logical port is not performing network-side

                    procedures, then this object is not instantiated."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17],

                         LMI [24]"

            ::= { frMgtVCSigEntry 23 }

        frMgtVCSigNetT392Admin OBJECT-TYPE

            SYNTAX      INTEGER (5..30)

            UNITS       "Seconds"

            MAX-ACCESS  read-write

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the desired

                    Network-side T392 polling verification timer value

                    (nT2 for LMI)  for this UNI/NNI logical port. If

                    the logical port is not performing network-side

                    procedures, then this object is not instantiated."

            REFERENCE   "Q.933 Annex A [22],

                         T1.617 Annex D [17],

                         LMI [24]"

            ::= { frMgtVCSigEntry 24 }

        frMgtVCSigNetnT3Admin OBJECT-TYPE

            SYNTAX      INTEGER (5 | 10 | 15 | 20 | 25 | 30)

            UNITS       "Seconds"

            MAX-ACCESS  read-write

            STATUS      current

            DESCRIPTION

                    "The value of this object identifies the desired

                    Network-side nT3 timer (for nN4 status enquires

                    received) value for this UNI/NNI logical port. If

                    the logical port is not performing network-side

                    procedures or is not performing LMI procedures,

                    then this object is not instantiated.  This object

                    applies only to LMI."

            REFERENCE   "LMI [24]"

            ::= { frMgtVCSigEntry 25 }

        --

        -- Frame Relay PVC End-points

        --

        frPVCEndptTable OBJECT-TYPE

            SYNTAX      SEQUENCE OF FrPVCEndptEntry

            MAX-ACCESS  not-accessible

            STATUS      current

            DESCRIPTION

                    "The Frame Relay PVC End-Point table.  This table

                    is used to model a PVC end-point.  This table

                    contains the traffic parameters and statistics for

                    a PVC end-point.

                    This table is used to identify the traffic

                    parameters for a bi-directional PVC segment end-

                    point, and it also provides statistics for a PVC

                    segment end-point.

                    A PVC segment end-point is identified by a UNI/NNI

                    logical port index value and DLCI index value.

                    If the frame relay service provider allows the

                    frame relay CNM subscriber to create, modify or