FIBRE-CHANNEL-FE-MIB DEFINITIONS ::= BEGIN

  IMPORTS

    MODULE-IDENTITY, OBJECT-TYPE,

    Unsigned32, Counter32, Gauge32, Integer32, mib-2

      FROM SNMPv2-SMI

    TEXTUAL-CONVENTION, TruthValue, TimeStamp

      FROM SNMPv2-TC

    SnmpAdminString

      FROM SNMP-FRAMEWORK-MIB                   -- rfc2571

    MODULE-COMPLIANCE, OBJECT-GROUP

      FROM SNMPv2-CONF;

  fcFeMIB MODULE-IDENTITY

    LAST-UPDATED "200005180000Z"

    ORGANIZATION "IETF IPFC Working Group"

    CONTACT-INFO "Kha Sin Teow

                  Brocade Communications Systems,

                  1901 Guadalupe Parkway,

                  San Jose, CA 95131

                  U.S.A

                  Tel: +1 408 487 8180

                  Fax: +1 408 487 8190

                  Email: khasin@Brocade.COM

                 WG Mailing list:ipfc@standards.gadzoox.com

                 To Subscribe: ipfc-request@standards.gadzoox.com

                 In Body: subscribe"

    DESCRIPTION "The MIB module for Fibre Channel Fabric Element."

    REVISION "200005180000Z"

    DESCRIPTION "Initial revision, published as RFC 2837."

    ::= { mib-2 75 }

  fcFeMIBObjects OBJECT IDENTIFIER ::= { fcFeMIB 1 }

   --  Note:

   --  fcFeMIBConformance OBJECT IDENTIFIER ::= { fcFeMIB 2 }

   --  see at the end of the module

  -- Groups under fcFeMIBObjects

  fcFeConfig       OBJECT IDENTIFIER ::= { fcFeMIBObjects 1 }

  fcFeStatus       OBJECT IDENTIFIER ::= { fcFeMIBObjects 2 }

  fcFeError        OBJECT IDENTIFIER ::= { fcFeMIBObjects 3 }

  fcFeAccounting   OBJECT IDENTIFIER ::= { fcFeMIBObjects 4 }

  fcFeCapabilities OBJECT IDENTIFIER ::= { fcFeMIBObjects 5 }

  -- Textual Conventions

  MilliSeconds ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents time unit value in milliseconds."

    SYNTAX         Unsigned32

  MicroSeconds ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents time unit value in microseconds."

    SYNTAX         Unsigned32

  FcNameId ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents the Worldwide Name associated with

                    a Fibre Channel (FC) entity."

    SYNTAX         OCTET STRING (SIZE (8))

  FcAddressId ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents Fibre Channel Address ID, a 24-bit

                    value unique within the address space of a Fabric."

    SYNTAX         OCTET STRING (SIZE (3))

  FcRxDataFieldSize ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents the receive data field size of an

                    NxPort or FxPort."

    SYNTAX         Integer32 (128..2112)

  FcBbCredit ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents the buffer-to-buffer credit of an

                    NxPort or FxPort."

    SYNTAX         Integer32 (0..32767)

  FcphVersion ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents the version of FC-PH supported by an

                    NxPort or FxPort."

    SYNTAX         Integer32 (0..255)

  FcStackedConnMode ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents an enumerated value used to indicate

                    the Class 1 Stacked Connect Mode supported by

                    an NxPort or FxPort."

    SYNTAX         INTEGER {

                        none(1),

                        transparent(2),

                        lockedDown(3)

    }

  FcCosCap ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents the class of service capability of an

                    NxPort or FxPort."

    SYNTAX         BITS { classF(0), class1(1), class2(2), class3(3),

                          class4(4), class5(5), class6(6) }

  FcFeModuleCapacity ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents the maximum number of modules within

                    a Fabric Element."

    SYNTAX         Unsigned32

  FcFeFxPortCapacity ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents the maximum number of FxPorts within

                    a module."

    SYNTAX         Unsigned32

  FcFeModuleIndex ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents the module index within a conceptual table."

    SYNTAX         Unsigned32

  FcFeFxPortIndex ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents the FxPort index within a conceptual table."

    SYNTAX         Unsigned32

  FcFeNxPortIndex ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents the NxPort index within a conceptual table."

    SYNTAX         Integer32 (1..126)

  FcBbCreditModel ::= TEXTUAL-CONVENTION

    STATUS         current

    DESCRIPTION    "Represents the BB_Credit model of an FxPort."

    SYNTAX         INTEGER { regular(1), alternate (2) }

  -- The Configuration group

  -- This group consists of scalar objects and tables.

  -- It contains the configuration and service parameters

  -- of the Fabric Element and the FxPorts.

  -- The group represents a set of parameters associated with

  -- the Fabric Element  or an FxPort to support its NxPorts.

  fcFeFabricName OBJECT-TYPE

      SYNTAX      FcNameId

      MAX-ACCESS  read-write

      STATUS      current

      DESCRIPTION

         "The Name_Identifier of the Fabric to which this Fabric

          Element belongs."

  ::= { fcFeConfig 1 }

  fcFeElementName OBJECT-TYPE

      SYNTAX      FcNameId

      MAX-ACCESS  read-write

      STATUS      current

      DESCRIPTION

         "The Name_Identifier of the Fabric Element."

  ::= { fcFeConfig 2 }

  fcFeModuleCapacity OBJECT-TYPE

      SYNTAX      FcFeModuleCapacity

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The maximum number of modules in the Fabric Element,

          regardless of their current state."

  ::= { fcFeConfig 3 }

  -- The Module Table.

  -- This table contains one entry for each module,

  -- information of the modules.

  fcFeModuleTable OBJECT-TYPE

      SYNTAX      SEQUENCE OF FcFeModuleEntry

      MAX-ACCESS  not-accessible

      STATUS      current

      DESCRIPTION

         "A table that contains, one entry for each module in the

          Fabric Element, information of the modules."

  ::= { fcFeConfig 4 }

  fcFeModuleEntry OBJECT-TYPE

      SYNTAX      FcFeModuleEntry

      MAX-ACCESS  not-accessible

      STATUS      current

      DESCRIPTION

         "An entry containing the configuration parameters of a

          module."

      INDEX { fcFeModuleIndex }

  ::= { fcFeModuleTable 1 }

  FcFeModuleEntry ::=

      SEQUENCE {

          fcFeModuleIndex

              FcFeModuleIndex,

          fcFeModuleDescr

              SnmpAdminString,

          fcFeModuleObjectID

              OBJECT IDENTIFIER,

          fcFeModuleOperStatus

              INTEGER,

          fcFeModuleLastChange

              TimeStamp,

          fcFeModuleFxPortCapacity

              FcFeFxPortCapacity,

          fcFeModuleName

              FcNameId

      }

  fcFeModuleIndex OBJECT-TYPE

      SYNTAX      FcFeModuleIndex

      MAX-ACCESS  not-accessible

      STATUS      current

      DESCRIPTION

         "This object identifies the module within the Fabric Element

          for which this entry contains information. This value is

          never greater than fcFeModuleCapacity."

  ::= { fcFeModuleEntry 1 }

  fcFeModuleDescr OBJECT-TYPE

      SYNTAX      SnmpAdminString

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "A textual description of the module. This value should

          include the full name and version identification of the

          module."

  ::= { fcFeModuleEntry 2 }

  fcFeModuleObjectID OBJECT-TYPE

      SYNTAX      OBJECT IDENTIFIER

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The vendor's authoritative identification of the module.

          This value may be allocated within the SMI enterprises

          subtree (1.3.6.1.4.1) and provides a straight-forward and

          unambiguous means for determining what kind of module is

          being managed.

          For example, this object could take the value

          1.3.6.1.4.1.99649.3.9 if vendor 'Neufe Inc.' was assigned

          the subtree 1.3.6.1.4.1.99649, and had assigned the

          identifier 1.3.6.1.4.1.99649.3.9 to its 'FeFiFo-16

          PlugInCard.'"

  ::= { fcFeModuleEntry 3 }

  fcFeModuleOperStatus    OBJECT-TYPE

      SYNTAX      INTEGER {

                      online  (1), -- functional

                      offline (2), -- not available

                      testing (3), -- under testing

                      faulty  (4)  -- defective

                  }

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "This object indicates the operational status of the module:

          online(1)   the module is functioning properly;

          offline(2)  the module is not available;

          testing(3)  the module is under testing; and

          faulty(4)   the module is defective in some way."

  ::= { fcFeModuleEntry 4 }

  fcFeModuleLastChange OBJECT-TYPE

      SYNTAX      TimeStamp

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "This object contains the value of sysUpTime when the module

          entered its current operational status. A value of zero

          indicates that the operational status of the module has not

          changed since the agent last restarted."

  ::= { fcFeModuleEntry 5 }

  fcFeModuleFxPortCapacity OBJECT-TYPE

      SYNTAX      FcFeFxPortCapacity

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The number of FxPort that can be contained within the

          module. Within each module, the ports are uniquely numbered

          in the range from 1 to fcFeModuleFxPortCapacity inclusive.

          However, the numbers are not required to be contiguous."

  ::= { fcFeModuleEntry 6 }

  fcFeModuleName OBJECT-TYPE

      SYNTAX      FcNameId

      MAX-ACCESS  read-write

      STATUS      current

      DESCRIPTION

         "The Name_Identifier of the module."

  ::= { fcFeModuleEntry 7 }

  -- the FxPort Configuration Table.

  -- This table contains, one entry for each FxPort,

  -- configuration parameters of the ports.

 fcFxPortTable OBJECT-TYPE

     SYNTAX      SEQUENCE OF FcFxPortEntry

     MAX-ACCESS  not-accessible

     STATUS      current

     DESCRIPTION

        "A table that contains, one entry for each FxPort in the

         Fabric Element, configuration and service parameters of the

         FxPorts."

 ::= { fcFeConfig 5 }

 fcFxPortEntry OBJECT-TYPE

     SYNTAX      FcFxPortEntry

     MAX-ACCESS  not-accessible

     STATUS      current

     DESCRIPTION

        "An entry containing the configuration and service parameters

         of a FxPort."

     INDEX { fcFeModuleIndex, fcFxPortIndex }

 ::= { fcFxPortTable 1 }

 FcFxPortEntry ::=

     SEQUENCE {

         fcFxPortIndex

             FcFeFxPortIndex,

         fcFxPortName

             FcNameId,

         -- FxPort common service parameters

         fcFxPortFcphVersionHigh

             FcphVersion,

         fcFxPortFcphVersionLow

             FcphVersion,

         fcFxPortBbCredit

             FcBbCredit,

         fcFxPortRxBufSize

             FcRxDataFieldSize,

         fcFxPortRatov

             MilliSeconds,

         fcFxPortEdtov

             MilliSeconds,

         -- FxPort class service parameters

         fcFxPortCosSupported

             FcCosCap,

         fcFxPortIntermixSupported

             TruthValue,

         fcFxPortStackedConnMode

             FcStackedConnMode,

         fcFxPortClass2SeqDeliv

             TruthValue,

         fcFxPortClass3SeqDeliv

             TruthValue,

         -- other configuration parameters

         fcFxPortHoldTime

             MicroSeconds

     }

  fcFxPortIndex OBJECT-TYPE

      SYNTAX      FcFeFxPortIndex

      MAX-ACCESS  not-accessible

      STATUS      current

      DESCRIPTION

         "This object identifies the FxPort within the module.  This

          number ranges from 1 to the value of fcFeModulePortCapacity

          for the associated module. The value remains constant for

          the identified FxPort until the module is re-initialized."

  ::= { fcFxPortEntry 1 }

  fcFxPortName OBJECT-TYPE

      SYNTAX      FcNameId

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The World_wide Name of this FxPort.  Each FxPort has a

          unique Port World_wide Name within the Fabric."

  ::= { fcFxPortEntry 2 }

  -- FxPort common service parameters

  fcFxPortFcphVersionHigh OBJECT-TYPE

      SYNTAX      FcphVersion

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The highest or most recent version of FC-PH that the FxPort

          is configured to support."

  ::= { fcFxPortEntry 3 }

  fcFxPortFcphVersionLow OBJECT-TYPE

      SYNTAX      FcphVersion

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The lowest or earliest version of FC-PH that the FxPort is

          configured to support."

  ::= { fcFxPortEntry 4 }

  fcFxPortBbCredit OBJECT-TYPE

      SYNTAX      FcBbCredit

      UNITS       "buffers"

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The total number of receive buffers available for holding

          Class 1 connect-request, Class 2 or 3 frames from the

          attached NxPort.  It is for buffer-to-buffer flow control

          in the direction from the attached NxPort (if applicable)

          to FxPort."

      ::= { fcFxPortEntry 5 }

  fcFxPortRxBufSize OBJECT-TYPE

      SYNTAX      FcRxDataFieldSize

      UNITS       "bytes"

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The largest Data_Field Size (in octets) for an FT_1 frame

          that can be received by the FxPort."

  ::= { fcFxPortEntry 6 }

  fcFxPortRatov OBJECT-TYPE

      SYNTAX      MilliSeconds

      UNITS       "milliseconds"

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The Resource_Allocation_Timeout Value configured for the

          FxPort.  This is used as the timeout value for determining

          when to reuse an NxPort resource such as a

          Recovery_Qualifier.  It represents E_D_TOV (see next

          object) plus twice the maximum time that a frame may be

          delayed within the Fabric and still be delivered."

      ::= { fcFxPortEntry 7 }

  fcFxPortEdtov OBJECT-TYPE

      SYNTAX      MilliSeconds

      UNITS       "milliseconds"

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The E_D_TOV value configured for the FxPort. The

          Error_Detect_Timeout Value is used as the timeout value for

          detecting an error condition."

  ::= { fcFxPortEntry 8 }

  -- FxPort class service parameters

  fcFxPortCosSupported OBJECT-TYPE

      SYNTAX      FcCosCap

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "A value indicating the set of Classes of Service supported

          by the FxPort."

  ::= { fcFxPortEntry 9 }

  fcFxPortIntermixSupported OBJECT-TYPE

      SYNTAX      TruthValue

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "A flag indicating whether or not the FxPort supports an

          Intermixed Dedicated Connection."

  ::= { fcFxPortEntry 10 }

  fcFxPortStackedConnMode OBJECT-TYPE

      SYNTAX      FcStackedConnMode

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "A value indicating the mode of Stacked Connect supported by

          the FxPort."

  ::= { fcFxPortEntry 11 }

  fcFxPortClass2SeqDeliv OBJECT-TYPE

      SYNTAX      TruthValue

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "A flag indicating whether or not Class 2 Sequential

          Delivery is supported by the FxPort."

  ::= { fcFxPortEntry 12 }

  fcFxPortClass3SeqDeliv OBJECT-TYPE

      SYNTAX      TruthValue

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "A flag indicating whether or not Class 3 Sequential

          Delivery is supported by the FxPort."

  ::= { fcFxPortEntry 13 }

  -- other FxPort parameters

  fcFxPortHoldTime OBJECT-TYPE

      SYNTAX      MicroSeconds

      UNITS       "microseconds"

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The maximum time (in microseconds) that the FxPort shall

          hold a frame before discarding the frame if it is unable to

          deliver the frame. The value 0 means that the FxPort does

          not support this parameter."

  ::= { fcFxPortEntry 14 }

  -- the Status group

  -- This group consists of tables that contains operational

  -- status and established service parameters for the Fabric

  -- Element and the attached NxPorts.

  -- The FxPort Status table

  -- This table contains, one entry for each FxPort,

  -- the operational status and parameters of the FxPorts.

  fcFxPortStatusTable OBJECT-TYPE

      SYNTAX      SEQUENCE OF FcFxPortStatusEntry

      MAX-ACCESS  not-accessible

      STATUS      current

      DESCRIPTION

         "A table that contains, one entry for each FxPort in the

          Fabric Element, operational status and parameters of the

          FxPorts."

  ::= { fcFeStatus 1 }

  fcFxPortStatusEntry OBJECT-TYPE

      SYNTAX      FcFxPortStatusEntry

      MAX-ACCESS  not-accessible

      STATUS      current

      DESCRIPTION

         "An entry containing operational status and parameters of a

          FxPort."

      AUGMENTS { fcFxPortEntry }

  ::= { fcFxPortStatusTable 1 }

  FcFxPortStatusEntry ::=

      SEQUENCE {

          fcFxPortID

              FcAddressId,

          fcFxPortBbCreditAvailable

              Gauge32,

          fcFxPortOperMode

              INTEGER,

          fcFxPortAdminMode

              INTEGER

      }

  fcFxPortID   OBJECT-TYPE

      SYNTAX      FcAddressId

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The address identifier by which this FxPort is identified

          within the Fabric.  The FxPort may assign its address

          identifier to its attached NxPort(s) during Fabric Login."

  ::= { fcFxPortStatusEntry 1 }

  fcFxPortBbCreditAvailable OBJECT-TYPE

      SYNTAX      Gauge32

      UNITS       "buffers"

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The number of buffers currently available for receiving

          frames from the attached port in the buffer-to-buffer flow

          control. The value should be less than or equal to

          fcFxPortBbCredit."

  ::= { fcFxPortStatusEntry 2 }

  fcFxPortOperMode    OBJECT-TYPE

      SYNTAX              INTEGER { unknown(1), fPort(2), flPort(3) }

      MAX-ACCESS          read-only

      STATUS              current

      DESCRIPTION

         "The current operational mode of the FxPort."

  ::= { fcFxPortStatusEntry 3 }

  fcFxPortAdminMode   OBJECT-TYPE

      SYNTAX              INTEGER { fPort(2), flPort(3) }

      MAX-ACCESS          read-write

      STATUS              current

      DESCRIPTION

         "The desired operational mode of the FxPort."

  ::= { fcFxPortStatusEntry 4 }

  -- the FxPort Physical Level table

  -- This table contains, one entry for each FxPort in the

  -- Fabric Element, the physical level status and parameters

  -- of the FxPorts.

  fcFxPortPhysTable OBJECT-TYPE

      SYNTAX      SEQUENCE OF FcFxPortPhysEntry

      MAX-ACCESS  not-accessible

      STATUS      current

      DESCRIPTION

         "A table that contains, one entry for each FxPort in the

          Fabric Element, physical level status and parameters of the

          FxPorts."

  ::= { fcFeStatus 2 }

  fcFxPortPhysEntry OBJECT-TYPE

      SYNTAX      FcFxPortPhysEntry

      MAX-ACCESS  not-accessible

      STATUS      current

      DESCRIPTION

         "An entry containing physical level status and parameters of

          a FxPort."

      AUGMENTS { fcFxPortEntry }

  ::= { fcFxPortPhysTable 1 }

  FcFxPortPhysEntry ::=

      SEQUENCE {

          fcFxPortPhysAdminStatus

              INTEGER,

          fcFxPortPhysOperStatus

              INTEGER,

          fcFxPortPhysLastChange

              TimeStamp,

          fcFxPortPhysRttov

              MilliSeconds

      }

  fcFxPortPhysAdminStatus OBJECT-TYPE

      SYNTAX      INTEGER {

                      online  (1),  -- place port online

                      offline (2),  -- take port offline

                      testing (3)   -- initiate test procedures

                  }

      MAX-ACCESS  read-write

      STATUS      current

      DESCRIPTION

         "The desired state of the FxPort.  A management station may

          place the FxPort in a desired state by setting this object

          accordingly.  The testing(3) state indicates that no

          operational frames can be passed.  When a Fabric Element

          initializes, all FxPorts start with fcFxPortPhysAdminStatus

          in the offline(2) state.  As the result of either explicit

          management action or per configuration information

          accessible by the Fabric Element, fcFxPortPhysAdminStatus

          is then changed to either the online(1) or testing(3)

          states, or remains in the offline state."

  ::= { fcFxPortPhysEntry 1 }

  fcFxPortPhysOperStatus   OBJECT-TYPE

      SYNTAX      INTEGER {

          online       (1), -- Login may proceed

          offline      (2), -- Login cannot proceed

          testing      (3), -- port is under test

          linkFailure  (4)  -- failure after online/testing

      }

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The current operational status of the FxPort.  The

          testing(3) indicates that no operational frames can be

          passed.  If fcFxPortPhysAdminStatus is offline(2) then

          fcFxPortPhysOperStatus should be offline(2). If

          fcFxPortPhysAdminStatus is changed to online(1) then

          fcFxPortPhysOperStatus should change to online(1) if the

          FxPort is ready to accept Fabric Login request from the

          attached NxPort; it should proceed and remain in the link-

          failure(4) state if and only if there is a fault that

          prevents it from going to the online(1) state."

  ::= { fcFxPortPhysEntry 2 }

  fcFxPortPhysLastChange OBJECT-TYPE

      SYNTAX      TimeStamp

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The value of sysUpTime at the time the FxPort entered its

          current operational status. A value of zero indicates that

          the FxPort's operational status has not changed since the

          agent last restarted."

  ::= { fcFxPortPhysEntry 3 }

  fcFxPortPhysRttov OBJECT-TYPE

      SYNTAX      MilliSeconds

      UNITS       "milliseconds"

      MAX-ACCESS  read-write

      STATUS      current

      DESCRIPTION

         "The Receiver_Transmitter_Timeout value of the FxPort. This

          is used by the receiver logic to detect Loss of

          Synchronization."

  ::= { fcFxPortPhysEntry 4 }

  -- The FxPort Fabric Login table

  --

  -- This table contains, one entry for each FxPort in the

  -- Fabric Element, the Service Parameters that have been

  -- established from the most recent Fabric Login,

  -- implicit or explicit.

  fcFxLoginTable OBJECT-TYPE

      SYNTAX      SEQUENCE OF FcFxLoginEntry

      MAX-ACCESS  not-accessible

      STATUS      current

      DESCRIPTION

         "A table that contains, one entry for each NxPort attached

          to a particular FxPort in the Fabric Element, services

          parameters established from the most recent Fabric Login,

          explicit or implicit. Note that an FxPort may have one or

          more NxPort attached to it."

  ::= { fcFeStatus 3 }

  fcFxLoginEntry OBJECT-TYPE

      SYNTAX      FcFxLoginEntry

      MAX-ACCESS  not-accessible

      STATUS      current

      DESCRIPTION

         "An entry containing service parameters established from a

          successful Fabric Login."

      INDEX { fcFeModuleIndex, fcFxPortIndex, fcFxPortNxLoginIndex }

  ::= { fcFxLoginTable 1 }

  FcFxLoginEntry ::=

      SEQUENCE {

          fcFxPortNxLoginIndex

              FcFeNxPortIndex,

          fcFxPortFcphVersionAgreed

              FcphVersion,

          fcFxPortNxPortBbCredit

              FcBbCredit,

          fcFxPortNxPortRxDataFieldSize

              FcRxDataFieldSize,

          fcFxPortCosSuppAgreed

              FcCosCap,

          fcFxPortIntermixSuppAgreed

              TruthValue,

          fcFxPortStackedConnModeAgreed

              FcStackedConnMode,

          fcFxPortClass2SeqDelivAgreed

              TruthValue,

          fcFxPortClass3SeqDelivAgreed

              TruthValue,

          --

          fcFxPortNxPortName

              FcNameId,

          fcFxPortConnectedNxPort

              FcAddressId,

          fcFxPortBbCreditModel

              FcBbCreditModel

      }

  fcFxPortNxLoginIndex OBJECT-TYPE

      SYNTAX      FcFeNxPortIndex

      MAX-ACCESS  not-accessible

      STATUS      current

      DESCRIPTION

         "The object identifies the associated NxPort in the

          attachment for which the entry contains information."

  ::= { fcFxLoginEntry 1 }

  fcFxPortFcphVersionAgreed OBJECT-TYPE

      SYNTAX      FcphVersion

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The version of FC-PH that the FxPort has agreed to support

          from the Fabric Login"

  ::= { fcFxLoginEntry 2 }

  fcFxPortNxPortBbCredit OBJECT-TYPE

      SYNTAX      FcBbCredit

      UNITS       "buffers"

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The total number of buffers available for holding Class 1

          connect-request, Class 2 or Class 3 frames to be

          transmitted to the attached NxPort.  It is for buffer-to-

          buffer flow control in the direction from FxPort to NxPort.

          The buffer-to-buffer flow control mechanism is indicated in

          the respective fcFxPortBbCreditModel."

  ::= { fcFxLoginEntry 3 }

  fcFxPortNxPortRxDataFieldSize OBJECT-TYPE

      SYNTAX      FcRxDataFieldSize

      UNITS       "bytes"

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The Receive Data Field Size of the attached NxPort. This

          object specifies the largest Data Field Size for an FT_1

          frame that can be received by the NxPort."

  ::= { fcFxLoginEntry 4 }

  fcFxPortCosSuppAgreed OBJECT-TYPE

      SYNTAX      FcCosCap

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "A variable indicating that the attached NxPort has

          requested the FxPort for the support of classes of services

          and the FxPort has granted the request."

  ::= { fcFxLoginEntry 5 }

  fcFxPortIntermixSuppAgreed OBJECT-TYPE

      SYNTAX      TruthValue

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "A variable indicating that the attached NxPort has

          requested the FxPort for the support of Intermix and the

          FxPort has granted the request. This flag is only valid if

          Class 1 service is supported."

  ::= { fcFxLoginEntry 6 }

  fcFxPortStackedConnModeAgreed OBJECT-TYPE

      SYNTAX      FcStackedConnMode

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "A variable indicating whether the FxPort has agreed to

          support stacked connect from the Fabric Login. This is only

          meaningful if Class 1 service has been agreed."

  ::= { fcFxLoginEntry 7 }

  fcFxPortClass2SeqDelivAgreed OBJECT-TYPE

      SYNTAX      TruthValue

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "A variable indicating whether the FxPort has agreed to

          support Class 2 sequential delivery from the Fabric Login.

          This is only meaningful if Class 2 service has been

          agreed."

  ::= { fcFxLoginEntry 8 }

  fcFxPortClass3SeqDelivAgreed OBJECT-TYPE

      SYNTAX      TruthValue

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "A flag indicating whether the FxPort has agreed to support

          Class 3 sequential delivery from the Fabric Login. This is

          only meaningful if Class 3 service has been agreed."

  ::= { fcFxLoginEntry 9 }

  fcFxPortNxPortName OBJECT-TYPE

      SYNTAX      FcNameId

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The port name of the attached NxPort."

  ::= { fcFxLoginEntry 10 }

  fcFxPortConnectedNxPort OBJECT-TYPE

      SYNTAX      FcAddressId

      MAX-ACCESS  read-only

      STATUS      current

      DESCRIPTION

         "The address identifier of the destination NxPort with which

          this FxPort is currently engaged in a either a Class 1 or

          loop connection. If this FxPort is not engaged in a

          connection, then the value of this object is '000000'H."

  ::= { fcFxLoginEntry 11 }

  fcFxPortBbCreditModel OBJECT-TYPE

      SYNTAX      FcBbCreditModel

      MAX-ACCESS  read-write

      STATUS      current

      DESCRIPTION

         "This object identifies the BB_Credit model used by the

          FxPort."

  ::= { fcFxLoginEntry 12 }

  -- the Error group

  -- This group consists of tables that contain information about

  -- the various types of errors detected.  The management station