FDDI-SMT73-MIB DEFINITIONS ::= BEGIN

IMPORTS

        Counter

            FROM RFC1155-SMI

        transmission

            FROM RFC1213-MIB

        OBJECT-TYPE

            FROM RFC-1212;

--  This MIB module uses the extended OBJECT-TYPE macro as

--  defined in [7].

-- this is the FDDI MIB module

fddi    OBJECT IDENTIFIER ::= { transmission 15 }

fddimib   OBJECT IDENTIFIER ::= { fddi 73 }

-- textual conventions

FddiTimeNano ::= INTEGER (0..2147483647)

-- This data type specifies 1 nanosecond units as

-- an integer value.

--

-- NOTE: The encoding is normal integer representation, not

-- two's complement.  Since this type is used for variables

-- which are encoded as TimerTwosComplement in the ANSI

-- specification, two operations need to be performed on such

-- variables to convert from ANSI form to SNMP form:

--

-- 1) Convert from two's complement to normal integer

--    representation

-- 2) Multiply by 80 to convert from 80 nsec to 1 nsec units

--

-- No resolution is lost.  Moreover, the objects for which

-- this data type is used effectively do not lose any range

-- due to the lower maximum value since they do not require

-- the full range.

--

-- Example: If fddimibMACTReq had a value of 8 ms, it would

-- be stored in ANSI TimerTwosComplement format as 0xFFFE7960

-- [8 ms is 100000 in 80 nsec units, which is then converted

-- to two's complement] but be reported as 8000000 in SNMP

-- since it is encoded here as FddiTimeNano.

FddiTimeMilli ::= INTEGER (0..2147483647)

-- This data type is used for some FDDI timers. It specifies

-- time in 1 millisecond units, in normal integer

-- representation.

FddiResourceId ::= INTEGER (0..65535)

-- This data type is used to refer to an instance of a  MAC,

-- PORT, or PATH Resource ID.  Indexing begins

-- at 1.  Zero is used to indicate the absence of a resource.

FddiSMTStationIdType ::= OCTET STRING (SIZE (8))

-- The unique identifier for the FDDI station.  This is a

-- string of 8 octets, represented as X' yy yy xx xx xx xx

-- xx xx' with the low order 6 octet (xx) from a unique IEEE

-- assigned address.  The high order two bits of the IEEE

-- address, the group address bit and the administration bit

-- (Universal/Local) bit should both be zero.  The first two

-- octets, the yy octets, are implementor-defined.

--

-- The representation of the address portion of the station id

-- is in the IEEE (ANSI/IEEE P802.1A) canonical notation for

-- 48 bit addresses.  The canonical form is a 6-octet string

-- where the first octet contains the first 8 bits of the

-- address, with the I/G(Individual/Group) address bit as the

-- least significant bit and the  U/L (Universal/Local) bit

-- as the next more significant bit, and so on.  Note that

-- addresses in the ANSI FDDI standard SMT frames are

-- represented in FDDI MAC order.

FddiMACLongAddressType ::= OCTET STRING (SIZE (6))

-- The representation of long MAC addresses as management

-- values is in the IEEE (ANSI/IEEE P802.1A) canonical

-- notation for 48 bit addresses.  The canonical form is a

-- 6-octet string where the first octet contains the first 8

-- bits of the address, with the I/G (Individual/Group)

-- address bit as the least significant bit and the  U/L

-- (Universal/Local) bit as the next more significant bit,

-- and so on.  Note that the addresses in the SMT frames are

-- represented in FDDI MAC order.

-- groups in the FDDI MIB module

fddimibSMT          OBJECT IDENTIFIER ::= { fddimib 1 }

fddimibMAC          OBJECT IDENTIFIER ::= { fddimib 2 }

fddimibMACCounters  OBJECT IDENTIFIER ::= { fddimib 3 }

fddimibPATH         OBJECT IDENTIFIER ::= { fddimib 4 }

fddimibPORT         OBJECT IDENTIFIER ::= { fddimib 5 }

-- the SMT group

-- Implementation of the SMT group is mandatory for all

-- systems which implement manageable FDDI subsystems.

fddimibSMTNumber OBJECT-TYPE

    SYNTAX  INTEGER (0..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of SMT implementations (regardless of

            their current state) on this network management

            application entity.  The value for this variable

            must remain constant at least from one re-

            initialization of the entity's network management

            system to the next re-initialization."

    ::= { fddimibSMT  1 }

-- the SMT table

fddimibSMTTable OBJECT-TYPE

    SYNTAX  SEQUENCE OF FddimibSMTEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "A list of SMT entries.  The number of entries

            shall not exceed the value of fddimibSMTNumber."

    ::= { fddimibSMT  2 }

fddimibSMTEntry OBJECT-TYPE

    SYNTAX  FddimibSMTEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "An SMT entry containing information common to a

            given SMT."

    INDEX   { fddimibSMTIndex }

    ::= { fddimibSMTTable 1 }

FddimibSMTEntry ::=

    SEQUENCE {

        fddimibSMTIndex

            INTEGER,

        fddimibSMTStationId

            FddiSMTStationIdType,

        fddimibSMTOpVersionId

            INTEGER,

        fddimibSMTHiVersionId

            INTEGER,

        fddimibSMTLoVersionId

            INTEGER,

        fddimibSMTUserData

            OCTET STRING,

        fddimibSMTMIBVersionId

            INTEGER,

        fddimibSMTMACCts

            INTEGER,

        fddimibSMTNonMasterCts

            INTEGER,

        fddimibSMTMasterCts

            INTEGER,

        fddimibSMTAvailablePaths

            INTEGER,

        fddimibSMTConfigCapabilities

            INTEGER,

        fddimibSMTConfigPolicy

            INTEGER,

        fddimibSMTConnectionPolicy

            INTEGER,

        fddimibSMTTNotify

            INTEGER,

        fddimibSMTStatRptPolicy

            INTEGER,

        fddimibSMTTraceMaxExpiration

            FddiTimeMilli,

        fddimibSMTBypassPresent

            INTEGER,

        fddimibSMTECMState

            INTEGER,

        fddimibSMTCFState

            INTEGER,

        fddimibSMTRemoteDisconnectFlag

            INTEGER,

        fddimibSMTStationStatus

            INTEGER,

        fddimibSMTPeerWrapFlag

            INTEGER,

        fddimibSMTTimeStamp

            FddiTimeMilli,

        fddimibSMTTransitionTimeStamp

            FddiTimeMilli,

        fddimibSMTStationAction

            INTEGER

    }

fddimibSMTIndex OBJECT-TYPE

    SYNTAX  INTEGER (1..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "A unique value for each SMT.  The value for each

            SMT must remain constant at least from one re-

            initialization of the entity's network management

            system to the next re-initialization."

    ::= { fddimibSMTEntry 1 }

fddimibSMTStationId OBJECT-TYPE

    SYNTAX  FddiSMTStationIdType -- OCTET STRING (SIZE (8))

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "Used to uniquely identify an FDDI station."

    REFERENCE

            "ANSI { fddiSMT 11 }"

    ::= { fddimibSMTEntry 2 }

fddimibSMTOpVersionId OBJECT-TYPE

    SYNTAX  INTEGER (1..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The version that this station is using for its

            operation (refer to ANSI 7.1.2.2). The value of

            this variable is 2 for this SMT revision."

    REFERENCE

            "ANSI { fddiSMT 13 }"

    ::= { fddimibSMTEntry 3 }

fddimibSMTHiVersionId OBJECT-TYPE

    SYNTAX  INTEGER (1..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The highest version of SMT that this station

            supports (refer to ANSI 7.1.2.2)."

    REFERENCE

            "ANSI { fddiSMT 14 }"

    ::= { fddimibSMTEntry 4 }

fddimibSMTLoVersionId OBJECT-TYPE

    SYNTAX  INTEGER (1..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The lowest version of SMT that this station

            supports (refer to ANSI 7.1.2.2)."

    REFERENCE

            "ANSI { fddiSMT 15 }"

    ::= { fddimibSMTEntry 5 }

fddimibSMTUserData OBJECT-TYPE

    SYNTAX  OCTET STRING (SIZE (32))

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "This variable contains 32 octets of user defined

            information. The information shall be an ASCII

            string."

    REFERENCE

            "ANSI { fddiSMT 17 }"

    ::= { fddimibSMTEntry 6 }

fddimibSMTMIBVersionId OBJECT-TYPE

    SYNTAX  INTEGER (0..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The version of the FDDI MIB of this station.  The

            value of this variable is 1 for this SMT

            revision."

    REFERENCE

            "ANSI { fddiSMT 18 }"

    ::= { fddimibSMTEntry 7 }

fddimibSMTMACCts OBJECT-TYPE

    SYNTAX  INTEGER (0..255)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of MACs in this station or

            concentrator."

    REFERENCE

            "ANSI { fddiSMT 21 }"

    ::= { fddimibSMTEntry 8 }

fddimibSMTNonMasterCts OBJECT-TYPE

    SYNTAX  INTEGER (0..2)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The value of this variable is the number of A, B,

            and S ports in this station or concentrator."

    REFERENCE

            "ANSI { fddiSMT 22 }"

    ::= { fddimibSMTEntry 9 }

fddimibSMTMasterCts OBJECT-TYPE

    SYNTAX  INTEGER (0..255)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of M Ports in a node. If the node is

            not a concentrator, the value of the variable is

            zero."

    REFERENCE

            "ANSI { fddiSMT 23 }"

    ::= { fddimibSMTEntry 10 }

fddimibSMTAvailablePaths OBJECT-TYPE

    SYNTAX  INTEGER (0..7)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "A value that indicates the PATH types available

            in the station.

            The value is a sum.  This value initially takes

            the value zero, then for each type of PATH that

            this node has available, 2 raised to a power is

            added to the sum.  The powers are according to the

            following table:

                     Path   Power

                  Primary     0

                Secondary     1

                    Local     2

            For example, a station having Primary and Local

            PATHs available would have a value of 5 (2**0 +

            2**2)."

    REFERENCE

            "ANSI { fddiSMT 24 }"

    ::= { fddimibSMTEntry 11 }

fddimibSMTConfigCapabilities OBJECT-TYPE

    SYNTAX  INTEGER (0..3)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "A value that indicates the configuration

            capabilities of a node. The 'Hold Available' bit

            indicates the support of the optional Hold

            Function, which is controlled by

            fddiSMTConfigPolicy.  The 'CF-Wrap-AB' bit

            indicates that the station has the capability of

            performing a wrap_ab (refer to ANSI SMT 9.7.2.2).

            The value is a sum.  This value initially takes

            the value zero, then for each of the configuration

            policies currently enforced on the node, 2 raised

            to a power is added to the sum.  The powers are

            according to the following table:

                       Policy   Power

                holdAvailable     0

                   CF-Wrap-AB     1 "

    REFERENCE

            "ANSI { fddiSMT 25 }"

    ::= { fddimibSMTEntry 12 }

fddimibSMTConfigPolicy OBJECT-TYPE

    SYNTAX  INTEGER (0..1)

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "A value that indicates the configuration policies

            currently desired in a node.  'Hold' is one of the

            terms used for the Hold Flag, an optional ECM flag

            used to enable the optional Hold policy.

            The value is a sum.  This value initially takes

            the value zero, then for each of the configuration

            policies currently enforced on the node, 2 raised

            to a power is added to the sum.  The powers are

            according to the following table:

                           Policy   Power

                configurationhold     0 "

    REFERENCE

            "ANSI { fddiSMT 26 }"

    ::= { fddimibSMTEntry 13 }

fddimibSMTConnectionPolicy OBJECT-TYPE

    SYNTAX  INTEGER (32768..65535)

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "A value representing the connection policies in

            effect in a node. A station sets the corresponding

            bit for each of the connection types that it

            rejects. The letter designations, X and Y, in the

            'rejectX-Y' names have the following significance:

            X represents the PC-Type of the local PORT and Y

            represents the PC_Type of the adjacent PORT

            (PC_Neighbor). The evaluation of Connection-

            Policy (PC-Type, PC-Neighbor) is done to determine

            the setting of T- Val(3) in the PC-Signalling

            sequence (refer to ANSI 9.6.3). Note that Bit 15,

            (rejectM-M), is always set and cannot be cleared.

            The value is a sum.  This value initially takes

            the value zero, then for each of the connection

            policies currently enforced on the node, 2 raised

            to a power is added to the sum.  The powers are

            according to the following table:

                   Policy   Power

                rejectA-A     0

                rejectA-B     1

                rejectA-S     2

                rejectA-M     3

                rejectB-A     4

                rejectB-B     5

                rejectB-S     6

                rejectB-M     7

                rejectS-A     8

                rejectS-B     9

                rejectS-S     10

                rejectS-M     11

                rejectM-A     12

                rejectM-B     13

                rejectM-S     14

                rejectM-M     15 "

    REFERENCE

            "ANSI { fddiSMT 27 }"

    ::= { fddimibSMTEntry 14 }

fddimibSMTTNotify OBJECT-TYPE

    SYNTAX  INTEGER (2..30)

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The timer, expressed in seconds, used in the

            Neighbor Notification protocol. It has a range of

            2 seconds to 30 seconds, and its default value is

            30 seconds (refer to ANSI SMT 8.2)."

    REFERENCE

            "ANSI { fddiSMT 29 }"

    ::= { fddimibSMTEntry 15 }

fddimibSMTStatRptPolicy OBJECT-TYPE

    SYNTAX  INTEGER { true(1), false(2) }

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "If true, indicates that the node will generate

            Status Reporting Frames for its implemented events

            and conditions. It has an initial value of true.

            This variable determines the value of the

            SR_Enable Flag (refer to ANSI SMT 8.3.2.1)."

    REFERENCE

            "ANSI { fddiSMT 30 }"

    ::= { fddimibSMTEntry 16 }

fddimibSMTTraceMaxExpiration OBJECT-TYPE

    SYNTAX  FddiTimeMilli

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "Reference Trace_Max (refer to ANSI SMT

            9.4.4.2.2)."

    REFERENCE

            "ANSI { fddiSMT 31 }"

    ::= { fddimibSMTEntry 17 }

fddimibSMTBypassPresent OBJECT-TYPE

    SYNTAX  INTEGER { true(1), false(2) }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "A flag indicating if the station has a bypass on

            its AB port pair."

    REFERENCE

            "ANSI { fddiSMT 34 }"

    ::= { fddimibSMTEntry 18 }

fddimibSMTECMState OBJECT-TYPE

    SYNTAX  INTEGER {

                ec0(1), -- Out

                ec1(2), -- In

                ec2(3), -- Trace

                ec3(4), -- Leave

                ec4(5), -- Path_Test

                ec5(6), -- Insert

                ec6(7), -- Check

                ec7(8)  -- Deinsert

            }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "Indicates the current state of the ECM state

            machine (refer to ANSI SMT 9.5.2)."

    REFERENCE

            "ANSI { fddiSMT 41 }"

    ::= { fddimibSMTEntry 19 }

fddimibSMTCFState OBJECT-TYPE

    SYNTAX  INTEGER {

                cf0(1),   -- isolated

                cf1(2),   -- local_a

                cf2(3),   -- local_b

                cf3(4),   -- local_ab

                cf4(5),   -- local_s

                cf5(6),   -- wrap_a

                cf6(7),   -- wrap_b

                cf7(8),   -- wrap_ab

                cf8(9),   -- wrap_s

                cf9(10),  -- c_wrap_a

                cf10(11), -- c_wrap_b

                cf11(12), -- c_wrap_s

                cf12(13)  -- thru

            }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The attachment configuration for the station or

            concentrator (refer to ANSI SMT 9.7.2.2)."

    REFERENCE

            "ANSI { fddiSMT 42 }"

    ::= { fddimibSMTEntry 20 }

fddimibSMTRemoteDisconnectFlag OBJECT-TYPE

    SYNTAX  INTEGER { true(1), false(2) }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "A flag indicating that the station was remotely

            disconnected from the network as a result of

            receiving an fddiSMTAction, disconnect (refer to

            ANSI SMT 6.4.5.3) in a Parameter Management Frame.

            A station requires a Connect Action to rejoin and

            clear the flag (refer to ANSI SMT 6.4.5.2)."

    REFERENCE

            "ANSI { fddiSMT 44 }"

    ::= { fddimibSMTEntry 21 }

fddimibSMTStationStatus OBJECT-TYPE

    SYNTAX  INTEGER { concatenated(1), separated(2), thru(3) }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The current status of the primary and secondary

            paths within this station."

    REFERENCE

            "ANSI { fddiSMT 45 }"

    ::= { fddimibSMTEntry 22 }

fddimibSMTPeerWrapFlag OBJECT-TYPE

    SYNTAX  INTEGER { true(1), false(2) }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "This variable assumes the value of the

            PeerWrapFlag in CFM (refer to ANSI SMT

            9.7.2.4.4)."

    REFERENCE

            "ANSI { fddiSMT 46 }"

    ::= { fddimibSMTEntry 23 }

fddimibSMTTimeStamp OBJECT-TYPE

    SYNTAX  FddiTimeMilli

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "This variable assumes the value of TimeStamp

            (refer to ANSI SMT 8.3.2.1)."

    REFERENCE

            "ANSI { fddiSMT 51 }"

    ::= { fddimibSMTEntry 24 }

fddimibSMTTransitionTimeStamp OBJECT-TYPE

    SYNTAX  FddiTimeMilli

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "This variable assumes the value of

            TransitionTimeStamp (refer to ANSI SMT 8.3.2.1)."

    REFERENCE

            "ANSI { fddiSMT 52 }"

    ::= { fddimibSMTEntry 25 }

fddimibSMTStationAction OBJECT-TYPE

    SYNTAX  INTEGER {

                other(1),               -- none of the following

                connect(2),

                disconnect(3),

                path-Test(4),

                self-Test(5),

                disable-a(6),

                disable-b(7),

                disable-m(8)

            }

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "This object, when read, always returns a value of

            other(1).  The behavior of setting this variable

            to each of the acceptable values is as follows:

                 other(1): Results in an appropriate error.

                 connect(2): Generates a Connect signal to ECM

                      to begin a connection sequence. See ANSI

                      Ref 9.4.2.

                 disconnect(3): Generates a Disconnect signal

                      to ECM. see ANSI Ref 9.4.2.

                 path-Test(4): Initiates a station Path_Test.

                      The Path_Test variable (see ANSI Ref

                      9.4.1) is set to 'Testing'. The results

                      of this action are not specified in this

                      standard.

                 self-Test(5): Initiates a station Self_Test.

                      The results of this action are not

                      specified in this standard.

                 disable-a(6): Causes a PC_Disable on the A

                      port if the A port mode is peer.

                 disable-b(7): Causes a PC_Disable on the B

                      port if the B port mode is peer.

                 disable-m(8): Causes a PC_Disable on all M

                      ports.

            Attempts to set this object to all other values

            results in an appropriate error.  The result of

            setting this variable to path-Test(4) or self-

            Test(5) is implementation-specific."

    REFERENCE

            "ANSI { fddiSMT 60 }"

    ::= { fddimibSMTEntry 26 }

-- the MAC group

-- Implementation of the MAC Group is mandatory for all

-- systems which implement manageable FDDI subsystems.

fddimibMACNumber OBJECT-TYPE

    SYNTAX  INTEGER (0..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The total number of MAC implementations (across

            all SMTs) on this network management application

            entity.  The value for this variable must remain

            constant at least from one re-initialization of

            the entity's network management system to the next

            re-initialization."

    ::= { fddimibMAC  1 }

-- the MAC table

fddimibMACTable OBJECT-TYPE

    SYNTAX  SEQUENCE OF FddimibMACEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "A list of MAC entries.  The number of entries

            shall not exceed the value of fddimibMACNumber."

    ::= { fddimibMAC  2 }

fddimibMACEntry OBJECT-TYPE

    SYNTAX  FddimibMACEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "A MAC entry containing information common to a

            given MAC."

    INDEX   { fddimibMACSMTIndex, fddimibMACIndex }

    ::= { fddimibMACTable 1 }

FddimibMACEntry ::=

    SEQUENCE {

        fddimibMACSMTIndex

                INTEGER,

        fddimibMACIndex

                INTEGER,

        fddimibMACIfIndex

                INTEGER,

        fddimibMACFrameStatusFunctions

                INTEGER,

        fddimibMACTMaxCapability

                FddiTimeNano,

        fddimibMACTVXCapability

                FddiTimeNano,

        fddimibMACAvailablePaths

                INTEGER,

        fddimibMACCurrentPath

                INTEGER,

        fddimibMACUpstreamNbr

                FddiMACLongAddressType,

        fddimibMACDownstreamNbr

                FddiMACLongAddressType,

        fddimibMACOldUpstreamNbr

                FddiMACLongAddressType,

        fddimibMACOldDownstreamNbr

                FddiMACLongAddressType,

        fddimibMACDupAddressTest

                INTEGER,

        fddimibMACRequestedPaths

                INTEGER,

        fddimibMACDownstreamPORTType

                INTEGER,

        fddimibMACSMTAddress

                FddiMACLongAddressType,

        fddimibMACTReq

                FddiTimeNano,

        fddimibMACTNeg

                FddiTimeNano,

        fddimibMACTMax

                FddiTimeNano,

        fddimibMACTvxValue

                FddiTimeNano,

        fddimibMACFrameCts

                Counter,

        fddimibMACCopiedCts

                Counter,

        fddimibMACTransmitCts

                Counter,

        fddimibMACErrorCts

                Counter,

        fddimibMACLostCts

                Counter,

        fddimibMACFrameErrorThreshold

                INTEGER,

        fddimibMACFrameErrorRatio

                INTEGER,

        fddimibMACRMTState

                INTEGER,

        fddimibMACDaFlag

                INTEGER,

        fddimibMACUnaDaFlag

                INTEGER,

        fddimibMACFrameErrorFlag

                INTEGER,

        fddimibMACMAUnitdataAvailable

                INTEGER,

        fddimibMACHardwarePresent

                INTEGER,

        fddimibMACMAUnitdataEnable

                INTEGER

    }

fddimibMACSMTIndex OBJECT-TYPE

    SYNTAX  INTEGER (1..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The value of the SMT index associated with this

            MAC."

    ::= { fddimibMACEntry 1 }

fddimibMACIndex OBJECT-TYPE

    SYNTAX  INTEGER (1..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "Index variable for uniquely identifying the MAC

            object instances, which is the same as the

            corresponding resource index in SMT."

    REFERENCE

            "ANSI { fddiMAC 34 }"

    ::= { fddimibMACEntry 2 }

fddimibMACIfIndex OBJECT-TYPE

    SYNTAX  INTEGER (1..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The value of the MIB-II ifIndex corresponding to

            this MAC.  If none is applicable, 0 is returned."

    REFERENCE

            "MIB-II"

    ::= { fddimibMACEntry 3 }

fddimibMACFrameStatusFunctions OBJECT-TYPE

    SYNTAX  INTEGER (0..7)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "Indicates the MAC's optional Frame Status

            processing functions.

            The value is a sum.  This value initially takes

            the value zero, then for each function present, 2

            raised to a power is added to the sum.  The powers

            are according to the following table:

                 function   Power

             fs-repeating     0

               fs-setting     1

              fs-clearing     2 "

    REFERENCE

            "ANSI { fddiMAC 11 }"

    ::= { fddimibMACEntry 4 }

fddimibMACTMaxCapability OBJECT-TYPE

    SYNTAX  FddiTimeNano

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "Indicates the maximum time value of fddiMACTMax

            that this MAC can support."

    REFERENCE

            "ANSI { fddiMAC 13 }"

    ::= { fddimibMACEntry 5 }

fddimibMACTVXCapability OBJECT-TYPE

    SYNTAX  FddiTimeNano

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "Indicates the maximum time value of

            fddiMACTvxValue that this MAC can support."

    REFERENCE

            "ANSI { fddiMAC 14 }"

    ::= { fddimibMACEntry 6 }

fddimibMACAvailablePaths OBJECT-TYPE

    SYNTAX  INTEGER (0..7)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "Indicates the paths available for this MAC (refer

            to ANSI SMT 9.7.7).

            The value is a sum.  This value initially takes

            the value zero, then for each type of PATH that

            this MAC has available, 2 raised to a power is

            added to the sum.  The powers are according to the

            following table:

                     Path   Power

                  Primary     0

                Secondary     1

                    Local     2 "

    REFERENCE

            "ANSI { fddiMAC 22 }"

    ::= { fddimibMACEntry 7 }

fddimibMACCurrentPath OBJECT-TYPE

    SYNTAX  INTEGER {

                isolated(1),

                local(2),

                secondary(3),

                primary(4),

                concatenated(5),

                thru(6)

            }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "Indicates the Path into which this MAC is

            currently inserted (refer to ANSI 9.7.7)."

    REFERENCE

            "ANSI { fddiMAC 23 }"

    ::= { fddimibMACEntry 8 }

fddimibMACUpstreamNbr OBJECT-TYPE

    SYNTAX  FddiMACLongAddressType -- OCTET STRING (SIZE (6))

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The MAC's upstream neighbor's long individual MAC

            address. It has an initial value of the SMT-

            Unknown-MAC Address and is only modified as

            specified by the Neighbor Information Frame

            protocol (refer to ANSI SMT 7.2.1 and 8.2)."

    REFERENCE

            "ANSI { fddiMAC 24 }"

    ::= { fddimibMACEntry 9 }

fddimibMACDownstreamNbr OBJECT-TYPE

    SYNTAX  FddiMACLongAddressType -- OCTET STRING (SIZE (6))

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The MAC's downstream neighbor's long individual

            MAC address. It has an initial value of the SMT-

            Unknown-MAC Address and is only modified as

            specified by the Neighbor Information Frame

            protocol (refer to ANSI SMT 7.2.1 and 8.2)."