CLNS-MIB DEFINITIONS ::= BEGIN

IMPORTS

        experimental, Counter

                FROM RFC1155-SMI

        PhysAddress

                FROM RFC1213-MIB

        OBJECT-TYPE

                FROM RFC-1212;

--  This MIB module uses the extended OBJECT-TYPE macro as

--  defined in [9]

--  the CLNS MIB module

clns    OBJECT IDENTIFIER ::= { experimental 1 }

-- textual conventions

ClnpAddress ::=

        OCTET STRING (SIZE (1..21))

-- This data type is used to model NSAP addresses.

-- groups in the CLNS MIB

clnp    OBJECT IDENTIFIER ::=   { clns 1 }

error   OBJECT IDENTIFIER ::=   { clns 2 }

echo    OBJECT IDENTIFIER ::=   { clns 3 }

es-is   OBJECT IDENTIFIER ::=   { clns 4 }

-- the CLNP group

-- Implementation of this group is recommended for all

-- systems which implement the CLNP.

clnpForwarding OBJECT-TYPE

    SYNTAX  INTEGER {

                is(1),   -- entity is an intermediate system

                         -- entity is an end system and does

                es(2)   -- not forward PDUs

            }

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The indication of whether this entity is active

            as an intermediate or end system.  Only

            intermediate systems will forward PDUs onward that

            are not addressed to them."

     ::= { clnp 1 }

clnpDefaultLifeTime OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The default value inserted into the Lifetime

            field of the CLNP PDU header of PDUs sourced by

            this entity."

    ::= { clnp 2 }

clnpInReceives OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The total number of input PDUs received from all

            connected network interfaces running CLNP,

            including errors."

    ::= { clnp 3 }

clnpInHdrErrors OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of input PDUs discarded due to errors

            in the CLNP header, including bad checksums,

            version mismatch, lifetime exceeded, errors

            discovered in processing options, etc."

    ::= { clnp 4 }

clnpInAddrErrors OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of input PDUs discarded because the

            NSAP address in the CLNP header's destination

            field was not a valid NSAP to be received at this

            entity.  This count includes addresses not

            understood.  For end systems, this is a count of

            PDUs which arrived with a destination NSAP which

            was not local."

    ::= { clnp 5 }

clnpForwPDUs OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of input PDUs for which this entity

            was not the final destination and which an attempt

            was made to forward them onward."

    ::= { clnp 6 }

clnpInUnknownNLPs OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of locally-addressed PDUs successfully

            received but discarded because the network layer

            protocol was unknown or unsupported (e.g., not

            CLNP or ES-IS)."

    ::= { clnp 7 }

clnpInUnknownULPs OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of locally-addressed PDUs successfully

            received but discarded because the upper layer

            protocol was unknown or unsupported (e.g., not

            TP4)."

    ::= { clnp 8 }

clnpInDiscards OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of input CLNP PDUs for which no

            problems were encountered to prevent their

            continued processing, but were discarded (e.g.,

            for lack of buffer space).  Note that this counter

            does not include any PDUs discarded while awaiting

            re-assembly."

    ::= { clnp 9 }

clnpInDelivers OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The total number of input PDUs successfully

            delivered to the CLNS transport user."

    ::= { clnp 10 }

clnpOutRequests OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The total number of CLNP PDUs which local CLNS

            user protocols supplied to CLNP for transmission

            requests.  This counter does not include any PDUs

            counted in clnpForwPDUs."

    ::= { clnp 11 }

clnpOutDiscards OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of output CLNP PDUs for which no other

            problem was encountered to prevent their

            transmission but were discarded (e.g., for lack of

            buffer space).  Note this counter includes PDUs

            counted in clnpForwPDUs."

    ::= { clnp 12 }

clnpOutNoRoutes OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of CLNP PDUs discarded because no

            route could be found to transmit them to their

            destination.  This counter includes any PDUs

            counted in clnpForwPDUs."

    ::= { clnp 13 }

clnpReasmTimeout OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The maximum number of seconds which received

            segments are held while they are awaiting

            reassembly at this entity."

    ::= { clnp 14 }

clnpReasmReqds OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of CLNP segments received which needed

            to be reassembled at this entity."

    ::= { clnp 15 }

clnpReasmOKs OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of CLNP PDUs successfully re-assembled

            at this entity."

    ::= { clnp 16 }

clnpReasmFails OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of failures detected by the CLNP

            reassembly algorithm (for any reason: timed out,

            buffer size, etc)."

    ::= { clnp 17 }

clnpSegOKs OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of CLNP PDUs that have been

            successfully segmented at this entity."

    ::= { clnp 18 }

clnpSegFails OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of CLNP PDUs that have been discarded

            because they needed to be fragmented at this

            entity but could not."

    ::= { clnp 19 }

clnpSegCreates OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of CLNP PDU segments that have been

            generated as a result of segmentation at this

            entity."

    ::= { clnp 20 }

clnpInOpts OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of CLNP PDU segments that have been

            input with options at this entity."

    ::= { clnp 25 }

clnpOutOpts OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of CLNP PDU segments that have been

            generated with options by this entity."

    ::= { clnp 26 }

clnpRoutingDiscards OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of routing entries which were chosen

            to be discarded even though they are valid.  One

            possible reason for discarding such an entry could

            be to free-up buffer space for other routing

            entries."

    ::= { clnp 27 }

-- the CLNP Interfaces table

-- The CLNP interfaces table contains information on the

-- entity's interfaces which are running the CLNP.

clnpAddrTable OBJECT-TYPE

    SYNTAX  SEQUENCE OF ClnpAddrEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "The table of addressing information relevant to

            this entity's CLNP addresses.  "

    ::= { clnp 21 }

clnpAddrEntry OBJECT-TYPE

    SYNTAX  ClnpAddrEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "The addressing information for one of this

            entity's CLNP addresses."

    INDEX   { clnpAdEntAddr }

    ::= { clnpAddrTable 1 }

ClnpAddrEntry ::=

    SEQUENCE {

        clnpAdEntAddr

            ClnpAddress,

        clnpAdEntIfIndex

            INTEGER,

        clnpAdEntReasmMaxSize

            INTEGER (0..65535)

    }

clnpAdEntAddr OBJECT-TYPE

    SYNTAX  ClnpAddress

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The CLNP address to which this entry's addressing

            information pertains."

    ::= { clnpAddrEntry 1 }

clnpAdEntIfIndex OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The index value which uniquely identifies the

            interface to which this entry is applicable.  The

            interface identified by a particular value of this

            index is the same interface as identified by the

            same value of ifIndex."

    ::= { clnpAddrEntry 2 }

clnpAdEntReasmMaxSize OBJECT-TYPE

    SYNTAX  INTEGER (0..65535)

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The size of the largest CLNP PDU which this

            entity can re-assemble from incoming CLNP

            segmented PDUs received on this interface."

    ::= { clnpAddrEntry 3 }

-- The CLNP Routing table

-- The CLNP routing table contains an entry for each route

-- known to the entity.

clnpRoutingTable OBJECT-TYPE

    SYNTAX  SEQUENCE OF ClnpRouteEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "This entity's CLNP routing table."

    ::= { clnp 22 }

clnpRouteEntry OBJECT-TYPE

    SYNTAX  ClnpRouteEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "A route to a particular destination."

    INDEX   { clnpRouteDest }

    ::= { clnpRoutingTable 1 }

ClnpRouteEntry ::=

    SEQUENCE {

        clnpRouteDest

            ClnpAddress,

        clnpRouteIfIndex

            INTEGER,

        clnpRouteMetric1

            INTEGER,

        clnpRouteMetric2

            INTEGER,

        clnpRouteMetric3

            INTEGER,

        clnpRouteMetric4

            INTEGER,

        clnpRouteNextHop

            ClnpAddress,

        clnpRouteType

            INTEGER,

        clnpRouteProto

            INTEGER,

        clnpRouteAge

            INTEGER,

        clnpRouteMetric5

            INTEGER,

        clnpRouteInfo

            OBJECT IDENTIFIER

    }

clnpRouteDest OBJECT-TYPE

    SYNTAX  ClnpAddress

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The destination CLNP address of this route."

    ::= { clnpRouteEntry 1 }

clnpRouteIfIndex OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The index value which uniquely identifies the

            local interface through which the next hop of this

            route should be reached.  The interface identified

            by a particular value of this index is the same as

            identified by the same value of ifIndex."

    ::= { clnpRouteEntry 2 }

clnpRouteMetric1 OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The primary routing metric for this route.  The

            semantics of this metric are determined by the

            routing-protocol specified in the route's

            clnpRouteProto value.  If this metric is not used,

            its value should be set to -1."

    ::= { clnpRouteEntry 3 }

clnpRouteMetric2 OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "An alternate routing metric for this route.  The

            semantics of this metric are determined by the

            routing-protocol specified in the route's

            clnpRouteProto value.  If this metric is not used,

            its value should be set to -1."

    ::= { clnpRouteEntry 4 }

clnpRouteMetric3 OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "An alternate routing metric for this route.  The

            semantics of this metric are determined by the

            routing-protocol specified in the route's

            clnpRouteProto value.  If this metric is not used,

            its value should be set to -1."

    ::= { clnpRouteEntry 5 }

clnpRouteMetric4 OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "An alternate routing metric for this route.  The

            semantics of this metric are determined by the

            routing-protocol specified in the route's

            clnpRouteProto value.  If this metric is not used,

            its value should be set to -1."

    ::= { clnpRouteEntry 6 }

clnpRouteNextHop OBJECT-TYPE

    SYNTAX  ClnpAddress

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The CLNP address of the next hop of this route."

    ::= { clnpRouteEntry 7 }

clnpRouteType OBJECT-TYPE

    SYNTAX  INTEGER {

                other(1),      -- none of the following

                invalid(2),    -- an invalidated route

                               -- route to directly

                direct(3),     -- connected (sub-)network

                               -- route to a non-local

                remote(4)      -- host/network/sub-network

            }

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The type of route.

            Setting this object to the value invalid(2) has

            the effect of invaliding the corresponding entry

            in the clnpRoutingTable.  That is, it effectively

            dissasociates the destination identified with said

            entry from the route identified with said entry.

            It is an implementation-specific matter as to

            whether the agent removes an invalidated entry

            from the table.  Accordingly, management stations

            must be prepared to receive tabular information

            from agents that corresponds to entries not

            currently in use.  Proper interpretation of such

            entries requires examination of the relevant

            clnpRouteType object."

    ::= { clnpRouteEntry 8 }

clnpRouteProto OBJECT-TYPE

    SYNTAX  INTEGER {

                other(1),     -- none of the following

                              -- non-protocol information

                              --   e.g., manually

                local(2),     --   configured entries

                              -- set via a network

                netmgmt(3),   --   management protocol

                              -- similar to ipRouteProto but

                              -- omits several IP-specific

                              -- protocols

                is-is(9),

                ciscoIgrp(11),

                bbnSpfIgp(12),

                ospf(13),

                bgp(14)

            }

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The routing mechanism via which this route was

            learned.  Inclusion of values for gateway routing

            protocols is not intended to imply that hosts

            should support those protocols."

    ::= { clnpRouteEntry 9 }

clnpRouteAge OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The number of seconds since this route was last

            updated or otherwise determined to be correct.

            Note that no semantics of `too old' can be implied

            except through knowledge of the routing protocol

            by which the route was learned."

    ::= { clnpRouteEntry 10 }

clnpRouteMetric5 OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "An alternate routing metric for this route.  The

            semantics of this metric are determined by the

            routing-protocol specified in the route's

            clnpRouteProto value.  If this metric is not used,

            its value should be set to -1."

    ::= { clnpRouteEntry 11 }

clnpRouteInfo OBJECT-TYPE

    SYNTAX  OBJECT IDENTIFIER

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "A reference to MIB definitions specific to the

            particular routing protocol which is responsible

            for this route, as determined by the value

            specified in the route's clnpRouteProto value.  If

            this information is not present, its value should

            be set to the OBJECT IDENTIFIER { 0 0 }, which is

            a syntatically valid object identifier, and any

            conformant implementation of ASN.1 and BER must be

            able to generate and recognize this value."

    ::= { clnpRouteEntry 12 }

-- the CLNP Address Translation table

-- The Address Translation tables contain the CLNP address

-- to physical address equivalences.  Some interfaces do not

-- use translation tables for determining address

-- equivalences; if all interfaces are of this type, then the

-- Address Translation table is empty, i.e., has zero

-- entries.

clnpNetToMediaTable OBJECT-TYPE

    SYNTAX  SEQUENCE OF ClnpNetToMediaEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "The CLNP Address Translation table used for

            mapping from CLNP addresses to physical

            addresses."

    ::= { clnp 23 }

clnpNetToMediaEntry OBJECT-TYPE

    SYNTAX  ClnpNetToMediaEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "Each entry contains one CLNP address to

            `physical' address equivalence."

    INDEX   { clnpNetToMediaIfIndex, clnpNetToMediaNetAddress }

    ::= { clnpNetToMediaTable 1 }

ClnpNetToMediaEntry ::=

    SEQUENCE {

        clnpNetToMediaIfIndex

            INTEGER,

        clnpNetToMediaPhysAddress

            PhysAddress,

        clnpNetToMediaNetAddress

            ClnpAddress,

        clnpNetToMediaType

            INTEGER,

        clnpNetToMediaAge

            INTEGER,

        clnpNetToMediaHoldTime

            INTEGER

    }

clnpNetToMediaIfIndex OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The interface on which this entry's equivalence

            is effective.  The interface identified by a

            particular value of this index is the same

            interface as identified by the same value of

            ifIndex."

    ::= { clnpNetToMediaEntry 1 }

clnpNetToMediaPhysAddress OBJECT-TYPE

    SYNTAX  PhysAddress

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The media-dependent `physical' address."

    ::= { clnpNetToMediaEntry 2 }

clnpNetToMediaNetAddress OBJECT-TYPE

    SYNTAX  ClnpAddress

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The CLNP address corresponding to the media-

            dependent `physical' address."

    ::= { clnpNetToMediaEntry 3 }

clnpNetToMediaType OBJECT-TYPE

    SYNTAX  INTEGER {

                other(1),       -- none of the following

                invalid(2),     -- an invalidated mapping

                dynamic(3),

                static(4)

            }

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The type of mapping.

            Setting this object to the value invalid(2) has

            the effect of invalidating the corresponding entry

            in the clnpNetToMediaTable.  That is, it

            effectively dissassociates the interface

            identified with said entry from the mapping

            identified with said entry.  It is an

            implementation-specific matter as to whether the

            agent removes an invalidated entry from the table.

            Accordingly, management stations must be prepared

            to receive tabular information from agents that

            corresponds to entries not currently in use.

            Proper interpretation of such entries requires

            examination of the relevant clnpNetToMediaType

            object."

    ::= { clnpNetToMediaEntry 4 }

clnpNetToMediaAge OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The number of seconds since this entry was last

            updated or otherwise determined to be correct.

            Note that no semantics of `too old' can be implied

            except through knowledge of the type of entry."

    ::= { clnpNetToMediaEntry 5 }

clnpNetToMediaHoldTime OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The time in seconds this entry will be valid.

            Static entries should always report this field as

            -1."

    ::= { clnpNetToMediaEntry 6 }

clnpMediaToNetTable OBJECT-TYPE

    SYNTAX  SEQUENCE OF ClnpMediaToNetEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "The CLNP Address Translation table used for

            mapping from physical addresses to CLNP

            addresses."

    ::= { clnp 24 }

clnpMediaToNetEntry OBJECT-TYPE

    SYNTAX  ClnpMediaToNetEntry

    ACCESS  not-accessible

    STATUS  mandatory

    DESCRIPTION

            "Each entry contains on ClnpAddress to `physical'

            address equivalence."

    INDEX   { clnpMediaToNetIfIndex, clnpMediaToNetPhysAddress }

    ::= { clnpMediaToNetTable 1 }

ClnpMediaToNetEntry ::=

    SEQUENCE {

        clnpMediaToNetIfIndex

            INTEGER,

        clnpMediaToNetAddress

            ClnpAddress,

        clnpMediaToNetPhysAddress

            PhysAddress,

        clnpMediaToNetType

            INTEGER,

        clnpMediaToNetAge

            INTEGER,

        clnpMediaToNetHoldTime

            INTEGER

    }

clnpMediaToNetIfIndex OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The interface on which this entry's equivalence

            is effective.  The interface identified by a

            particular value of this index is the same

            interface as identified by the same value of

            ifIndex."

    ::= { clnpMediaToNetEntry 1 }

clnpMediaToNetAddress OBJECT-TYPE

    SYNTAX  ClnpAddress

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The ClnpAddress corresponding to the media-

            dependent `physical' address."

    ::= { clnpMediaToNetEntry 2 }

clnpMediaToNetPhysAddress OBJECT-TYPE

    SYNTAX  PhysAddress

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The media-dependent `physical' address."

    ::= { clnpMediaToNetEntry 3 }

clnpMediaToNetType OBJECT-TYPE

    SYNTAX  INTEGER {

                other(1),       -- none of the following

                invalid(2),     -- an invalidated mapping

                dynamic(3),

                static(4)

            }

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The type of mapping.

            Setting this object to the value invalid(2) has

            the effect of invalidating the corresponding entry

            in the clnpMediaToNetTable.  That is, it

            effectively dissassociates the interface

            identified with said entry from the mapping

            identified with said entry.  It is an

            implementation-specific matter as to whether the

            agent removes an invalidated entry from the table.

            Accordingly, management stations must be prepared

            to receive tabular information from agents that

            corresponds to entries not currently in use.

            Proper interpretation of such entries requires

            examination of the relevant clnpMediaToNetType

            object."

    ::= { clnpMediaToNetEntry 4 }

clnpMediaToNetAge OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The number of seconds since this entry was last

            updated or otherwise determined to be correct.

            Note that no semantics of `too old' can be implied

            except through knowledge of the type of entry."

    ::= { clnpMediaToNetEntry 5 }

clnpMediaToNetHoldTime OBJECT-TYPE

    SYNTAX  INTEGER

    ACCESS  read-write

    STATUS  mandatory

    DESCRIPTION

            "The time in seconds this entry will be valid.

            Static entries should always report this field as

            -1."

    ::= { clnpMediaToNetEntry 6 }

-- the CLNP Error group

-- Implementation of this group is recommended for all

-- systems which implement the CLNP Error protocol.

clnpInErrors OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of CLNP Error PDUs received by this

            entity."

    ::= { error 1 }

clnpOutErrors OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of CLNP Error PDUs sent by this

            entity."

    ::= { error 2 }

clnpInErrUnspecs OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of unspecified CLNP Error PDUs

            received by this entity."

    ::= { error 3 }

clnpInErrProcs OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of protocol procedure CLNP Error PDUs

            received by this entity."

    ::= { error 4 }

clnpInErrCksums OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of checksum CLNP Error PDUs received

            by this entity."

    ::= { error 5 }

clnpInErrCongests OBJECT-TYPE

    SYNTAX  Counter

    ACCESS  read-only

    STATUS  mandatory

    DESCRIPTION

            "The number of congestion drop CLNP Error PDUs

            received by this entity."

    ::= { error 6 }