ADSL2-LINE-TC-MIB DEFINITIONS ::= BEGIN

IMPORTS

   MODULE-IDENTITY,

   transmission

      FROM SNMPv2-SMI

   TEXTUAL-CONVENTION

      FROM SNMPv2-TC;

adsl2TCMIB MODULE-IDENTITY

   LAST-UPDATED "200610040000Z" -- October 4th, 2006

   ORGANIZATION "ADSLMIB Working Group"

   CONTACT-INFO "WG-email:  adslmib@ietf.org

   Info:      https://www1.ietf.org/mailman/listinfo/adslmib

             Chair:     Mike Sneed

                        Sand Channel Systems

             Postal:    P.O. Box 37324

                        Raleigh NC 27627-732

             Email:     sneedmike@hotmail.com

             Phone:     +1 206 600 7022

             Co-Chair & Co-editor:

                        Menachem Dodge

                        ECI Telecom Ltd.

             Postal:    30 Hasivim St.

                        Petach Tikva 49517,

                        Israel.

             Email:     mbdodge@ieee.org

             Phone:     +972 3 926 8421

             Co-editor: Moti Morgenstern

                        ECI Telecom Ltd.

             Postal:    30 Hasivim St.

                        Petach Tikva 49517,

                        Israel.

             Email:     moti.morgenstern@ecitele.com

             Phone:     +972 3 926 6258

             Co-editor: Scott Baillie

                        NEC Australia

             Postal:    649-655 Springvale Road,

                        Mulgrave, Victoria 3170,

                        Australia.

             Email:     scott.baillie@nec.com.au

             Phone:     +61 3 9264 3986

             Co-editor: Umberto Bonollo

                        NEC Australia

             Postal:    649-655 Springvale Road,

                        Mulgrave, Victoria 3170,

                        Australia.

             Email:     umberto.bonollo@nec.com.au

             Phone:     +61 3 9264 3385

            "

   DESCRIPTION

        "This MIB Module provides Textual Conventions to be

         used by the ADSL2-LINE-MIB module for the purpose of

         managing ADSL, ADSL2, and ADSL2+ lines.

        Copyright (C) The Internet Society (2006).  This version of

        this MIB module is part of RFC 4706: see the RFC itself for

        full legal notices."

   REVISION "200610040000Z" -- October 4th, 2006

   DESCRIPTION "Initial version, published as RFC 4706."

      ::= { transmission 238 2 } -- adsl2MIB 2

------------------------------------------------

--          Textual Conventions               --

------------------------------------------------

Adsl2Unit ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "Identifies a transceiver as being either an ATU-C or

       an ATU-R.  An ADSL line consists of two transceivers, an ATU-C

       and an ATU-R.  Attributes with this syntax reference the two

       sides of a line.  Specified as an INTEGER, the two values

       are:

        atuc(1)  -- Central office ADSL terminal unit (ATU-C).

        atur(2)  -- Remote ADSL terminal unit (ATU-R)."

   SYNTAX      INTEGER {

                  atuc(1),

                  atur(2)

               }

Adsl2Direction ::= TEXTUAL-CONVENTION

     STATUS current

     DESCRIPTION

        "Identifies the direction of a band as being

         either upstream or downstream.  Specified as an INTEGER,

         the two values are:

          upstream(1), and

          downstream(2)."

     SYNTAX INTEGER {

       upstream(1),

       downstream(2)

    }

Adsl2TransmissionModeType ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "A set of ADSL2 line transmission modes, with one bit

       per mode.  The notes (F) and (L) denote Full-Rate

       and Lite/splitterless, respectively:

          Bit 00 : Regional Std. (ANSI T1.413) (F)

          Bit 01 : Regional Std. (ETSI DTS/TM06006) (F)

          Bit 02 : G.992.1 POTS non-overlapped (F)

          Bit 03 : G.992.1 POTS overlapped (F)

          Bit 04 : G.992.1 ISDN non-overlapped (F)

          Bit 05 : G.992.1 ISDN overlapped (F)

          Bit 06 : G.992.1 TCM-ISDN non-overlapped (F)

          Bit 07 : G.992.1 TCM-ISDN overlapped (F)

          Bit 08 : G.992.2 POTS non-overlapped (L)

          Bit 09 : G.992.2 POTS overlapped (L)

          Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L)

          Bit 11 : G.992.2 with TCM-ISDN overlapped (L)

          Bit 12 : G.992.1 TCM-ISDN symmetric (F) -- not in G.997.1

          Bit 13-17: Reserved

          Bit 18 : G.992.3 POTS non-overlapped (F)

          Bit 19 : G.992.3 POTS overlapped (F)

          Bit 20 : G.992.3 ISDN non-overlapped (F)

          Bit 21 : G.992.3 ISDN overlapped (F)

          Bit 22-23: Reserved

          Bit 24 : G.992.4 POTS non-overlapped (L)

          Bit 25 : G.992.4 POTS overlapped (L)

          Bit 26-27: Reserved

          Bit 28 : G.992.3 Annex I All-Digital non-overlapped (F)

          Bit 29 : G.992.3 Annex I All-Digital overlapped (F)

          Bit 30 : G.992.3 Annex J All-Digital non-overlapped (F)

          Bit 31 : G.992.3 Annex J All-Digital overlapped (F)

          Bit 32 : G.992.4 Annex I All-Digital non-overlapped (L)

          Bit 33 : G.992.4 Annex I All-Digital overlapped (L)

          Bit 34 : G.992.3 Annex L POTS non-overlapped, mode 1,

                                   wide U/S (F)

          Bit 35 : G.992.3 Annex L POTS non-overlapped, mode 2,

                                   narrow U/S(F)

          Bit 36 : G.992.3 Annex L POTS overlapped, mode 3,

                                   wide U/S (F)

          Bit 37 : G.992.3 Annex L POTS overlapped, mode 4,

                                   narrow U/S (F)

          Bit 38 : G.992.3 Annex M POTS non-overlapped (F)

          Bit 39 : G.992.3 Annex M POTS overlapped (F)

          Bit 40 : G.992.5 POTS non-overlapped (F)

          Bit 41 : G.992.5 POTS overlapped (F)

          Bit 42 : G.992.5 ISDN non-overlapped (F)

          Bit 43 : G.992.5 ISDN overlapped (F)

          Bit 44-45: Reserved

          Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F)

          Bit 47 : G.992.5 Annex I All-Digital overlapped (F)

          Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F)

          Bit 49 : G.992.5 Annex J All-Digital overlapped (F)

          Bit 50 : G.992.5 Annex M POTS non-overlapped (F)

          Bit 51 : G.992.5 Annex M POTS overlapped (F)

          Bit 52-55: Reserved"

   SYNTAX      BITS {

                  ansit1413(0),

                  etsi(1),

                  g9921PotsNonOverlapped(2),

                  g9921PotsOverlapped(3),

                  g9921IsdnNonOverlapped(4),

                  g9921isdnOverlapped(5),

                  g9921tcmIsdnNonOverlapped(6),

                  g9921tcmIsdnOverlapped(7),

                  g9922potsNonOverlapped(8),

                  g9922potsOverlapped(9),

                  g9922tcmIsdnNonOverlapped(10),

                  g9922tcmIsdnOverlapped(11),

                  g9921tcmIsdnSymmetric(12),

                  reserved1(13),

                  reserved2(14),

                  reserved3(15),

                  reserved4(16),

                  reserved5(17),

                  g9923PotsNonOverlapped(18),

                  g9923PotsOverlapped(19),

                  g9923IsdnNonOverlapped(20),

                  g9923isdnOverlapped(21),

                  reserved6(22),

                  reserved7(23),

                  g9924potsNonOverlapped(24),

                  g9924potsOverlapped(25),

                  reserved8(26),

                  reserved9(27),

                  g9923AnnexIAllDigNonOverlapped(28),

                  g9923AnnexIAllDigOverlapped(29),

                  g9923AnnexJAllDigNonOverlapped(30),

                  g9923AnnexJAllDigOverlapped(31),

                  g9924AnnexIAllDigNonOverlapped(32),

                  g9924AnnexIAllDigOverlapped(33),

                  g9923AnnexLMode1NonOverlapped(34),

                  g9923AnnexLMode2NonOverlapped(35),

                  g9923AnnexLMode3Overlapped(36),

                  g9923AnnexLMode4Overlapped(37),

                  g9923AnnexMPotsNonOverlapped(38),

                  g9923AnnexMPotsOverlapped(39),

                  g9925PotsNonOverlapped(40),

                  g9925PotsOverlapped(41),

                  g9925IsdnNonOverlapped(42),

                  g9925isdnOverlapped(43),

                  reserved10(44),

                  reserved11(45),

                  g9925AnnexIAllDigNonOverlapped(46),

                  g9925AnnexIAllDigOverlapped(47),

                  g9925AnnexJAllDigNonOverlapped(48),

                  g9925AnnexJAllDigOverlapped(49),

                  g9925AnnexMPotsNonOverlapped(50),

                  g9925AnnexMPotsOverlapped(51),

                  reserved12(52),

                  reserved13(53),

                  reserved14(54),

                  reserved15(55)

               }

Adsl2RaMode ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "Specifies the rate adaptation behavior for the line.

       The three possible behaviors are:

        manual(1)    - No Rate-Adaptation.  The initialization

                       process attempts to synchronize to a

                       specified rate.

        raInit(2)    - Rate-Adaptation during initialization process

                       only, which attempts to synchronize to a rate

                       between minimum and maximum specified values.

        dynamicRa(3) - Dynamic Rate-Adaptation during initialization

                       process as well as during SHOWTIME."

   SYNTAX      INTEGER {

                  manual(1),

                  raInit(2),

                  dynamicRa(3)

               }

Adsl2InitResult ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "Specifies the result of a full initialization attempt; the

       six possible result values are:

        noFail(0)            - Successful initialization.

        configError(1)       - Configuration failure.

        configNotFeasible(2) - Configuration details not supported.

        commFail(3)          - Communication failure.

        noPeerAtu(4)         - Peer ATU not detected.

        otherCause(5)        - Other initialization failure reason.

       The values used are as defined in ITU-T G.997.1,

       paragraph 7.5.1.3"

   SYNTAX      INTEGER {

                  noFail(0),

                  configError(1),

                  configNotFeasible(2),

                  commFail(3),

                  noPeerAtu(4),

                  otherCause(5)

               }

Adsl2OperationModes ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "The ADSL2 management model specified includes an ADSL Mode

       attribute that identifies an instance of ADSL Mode-Specific

       PSD Configuration object in the ADSL Line Profile.  The

       following classes of ADSL operating mode are defined.

       The notes (F) and (L) denote Full-Rate and Lite/splitterless

       respectively:

       +-------+--------------------------------------------------+

       | Value |         ADSL operation mode description          |

       +-------+--------------------------------------------------+

           1   - The default/generic PSD configuration.  Default

                 configuration will be used when no other matching

                 mode-specific configuration can be found.

           2   - ADSL family.  The attributes included in the Mode-

                 Specific PSD Configuration are irrelevant for

                 ITU-T G.992.1 and G.992.2 ADSL modes.  Hence, it

                 is possible to map those modes to this generic

                 class.

          3-7  - Unused. Reserved for future ITU-T specification.

           8   - G.992.3 POTS non-overlapped (F)

           9   - G.992.3 POTS overlapped (F)

          10   - G.992.3 ISDN non-overlapped (F)

          11   - G.992.3 ISDN overlapped (F)

        12-13  - Unused. Reserved for future ITU-T specification.

          14   - G.992.4 POTS non-overlapped (L)

          15   - G.992.4 POTS overlapped (L)

        16-17  - Unused. Reserved for future ITU-T specification.

          18   - G.992.3 Annex I All-Digital non-overlapped (F)

          19   - G.992.3 Annex I All-Digital overlapped (F)

          20   - G.992.3 Annex J All-Digital non-overlapped (F)

          21   - G.992.3 Annex J All-Digital overlapped (F)

          22   - G.992.4 Annex I All-Digital non-overlapped (L)

          23   - G.992.4 Annex I All-Digital overlapped (L)

          24   - G.992.3 Annex L POTS non-overlapped, mode 1,

                 wide U/S (F)

          25   - G.992.3 Annex L POTS non-overlapped, mode 2,

                 narrow U/S(F)

          26   - G.992.3 Annex L POTS overlapped, mode 3,

                 wide U/S (F)

          27   - G.992.3 Annex L POTS overlapped, mode 4,

                 narrow U/S (F)

          28   - G.992.3 Annex M POTS non-overlapped (F)

          29   - G.992.3 Annex M POTS overlapped (F)

          30   - G.992.5 POTS non-overlapped (F)

          31   - G.992.5 POTS overlapped (F)

          32   - G.992.5 ISDN non-overlapped (F)

          33   - G.992.5 ISDN overlapped (F)

        34-35  - Unused. Reserved for future ITU-T specification.

          36   - G.992.5 Annex I All-Digital non-overlapped (F)

          37   - G.992.5 Annex I All-Digital overlapped (F)

          38   - G.992.5 Annex J All-Digital non-overlapped (F)

          39   - G.992.5 Annex J All-Digital overlapped (F)

          40   - G.992.5 Annex M POTS non-overlapped (F)

          41   - G.992.5 Annex M POTS overlapped (F)

      "

   SYNTAX      INTEGER {

                  defMode (1),

                  adsl(2),

                  g9923PotsNonOverlapped(8),

                  g9923PotsOverlapped(9),

                  g9923IsdnNonOverlapped(10),

                  g9923isdnOverlapped(11),

                  g9924potsNonOverlapped(14),

                  g9924potsOverlapped(15),

                  g9923AnnexIAllDigNonOverlapped(18),

                  g9923AnnexIAllDigOverlapped(19),

                  g9923AnnexJAllDigNonOverlapped(20),

                  g9923AnnexJAllDigOverlapped(21),

                  g9924AnnexIAllDigNonOverlapped(22),

                  g9924AnnexIAllDigOverlapped(23),

                  g9923AnnexLMode1NonOverlapped(24),

                  g9923AnnexLMode2NonOverlapped(25),

                  g9923AnnexLMode3Overlapped(26),

                  g9923AnnexLMode4Overlapped(27),

                  g9923AnnexMPotsNonOverlapped(28),

                  g9923AnnexMPotsOverlapped(29),

                  g9925PotsNonOverlapped(30),

                  g9925PotsOverlapped(31),

                  g9925IsdnNonOverlapped(32),

                  g9925isdnOverlapped(33),

                  g9925AnnexIAllDigNonOverlapped(36),

                  g9925AnnexIAllDigOverlapped(37),

                  g9925AnnexJAllDigNonOverlapped(38),

                  g9925AnnexJAllDigOverlapped(39),

                  g9925AnnexMPotsNonOverlapped(40),

                  g9925AnnexMPotsOverlapped(41)

               }

Adsl2PowerMngState ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "Attributes with this syntax uniquely identify each power

       management state defined for the ADSL/ADSL2 or ADSL2+ link.

       The possible values are:

         l0(1) - L0 - Full power management state.

         l1(2) - L1 - Low power management state (for G.992.2).

         l2(3) - L2 - Low power management state (for G.992.3,

                      G.992.4, and G.992.5).

         l3(4) - L3 - Idle power management state."

   SYNTAX      INTEGER {

                  l0(1),

                  l1(2),

                  l2(3),

                  l3(4)

               }

Adsl2ConfPmsForce ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "Attributes with this syntax are configuration parameters

       that reference the desired power management state for the

       ADSL/ADSL2 or ADSL2+ link:

         l3toL0(0)          - Perform a transition from L3 to L0

                              (Full power management state).

         l0toL2(2)          - Perform a transition from L0 to L2

                              (Low power management state).

         l0orL2toL3(3)      - Perform a transition into L3 (Idle

                              power management state).

       The values used are as defined in ITU-T G.997.1,

       paragraph 7.3.1.1.3"

   SYNTAX      INTEGER {

                  l3toL0(0),

                  l0toL2(2),

                  l0orL2toL3(3)

               }

Adsl2LConfProfPmMode ::= TEXTUAL-CONVENTION

   STATUS current

   DESCRIPTION

      "Attributes with this syntax are configuration parameters

       that reference the power modes/states into which the ATU-C or

       ATU-R may autonomously transit.

       It is a BITS structure that allows control of the following

       transit options:

        allowTransitionsToIdle(0)     - XTU may autonomously transit

                                        to idle (L3) state.

        allowTransitionsToLowPower(1) - XTU may autonomously transit

                                        to low-power (L2) state."

   SYNTAX BITS {

       allowTransitionsToIdle(0),

       allowTransitionsToLowPower(1)

     }

Adsl2LineLdsf ::= TEXTUAL-CONVENTION

   STATUS current

   DESCRIPTION

      "Attributes with this syntax are configuration parameters

       that control the Loop Diagnostic mode for the ADSL/ADSL2 or

       ADSL2+ link.  The possible values are:

         inhibit(0)  - Inhibit Loop Diagnostic mode.

         force(1)    - Force/Initiate Loop Diagnostic mode.

       The values used are as defined in ITU-T G.997.1,

       paragraph 7.3.1.1.8"

   SYNTAX INTEGER {

       inhibit(0),

       force(1)

     }

Adsl2LdsfResult ::= TEXTUAL-CONVENTION

     STATUS current

     DESCRIPTION

        "Possible failure reasons associated with performing

         a Dual Ended Loop Test (DELT) on a DSL line.

         Possible values are:

          none(1)         - The default value in case LDSF was never

                            requested for the associated line.

          success(2)      - The recent command completed

                            successfully.

          inProgress(3)   - The Loop Diagnostics process is in

                            progress.

          unsupported(4)  - The NE or the line card doesn't support

                            LDSF.

          cannotRun(5)    - The NE cannot initiate the command, due

                            to a nonspecific reason.

          aborted(6)      - The Loop Diagnostics process aborted.

          failed(7)       - The Loop Diagnostics process failed.

          illegalMode(8)  - The NE cannot initiate the command, due

                            to the specific mode of the relevant

                            line.

          adminUp(9)      - The NE cannot initiate the command, as

                            the relevant line is administratively

                            'Up'.

          tableFull(10)   - The NE cannot initiate the command, due

                            to reaching the maximum number of rows

                            in the results table.

          noResources(11) - The NE cannot initiate the command, due

                            to lack of internal memory resources."

     SYNTAX INTEGER {

          none(1),

          success(2),

          inProgress(3),

          unsupported(4),

          cannotRun(5),

          aborted(6),

          failed(7),

          illegalMode(8),

          adminUp(9),

          tableFull(10),

          noResources(11)

     }

Adsl2SymbolProtection ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "Attributes with this syntax are configuration parameters

       that reference the minimum-length impulse noise protection

       (INP) in terms of number of symbols.  The possible values are:

       noProtection (i.e., INP not required), halfSymbol (i.e., INP

       length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol."

   SYNTAX      INTEGER {

               noProtection(1),

               halfSymbol(2),

               singleSymbol(3),

               twoSymbols(4),

               threeSymbols(5),

               fourSymbols(6),

               fiveSymbols(7),

               sixSymbols(8),

               sevenSymbols(9),

               eightSymbols(10),

               nineSymbols(11),

               tenSymbols(12),

               elevenSymbols(13),

               twelveSymbols(14),

               thirteeSymbols(15),

               fourteenSymbols(16),

               fifteenSymbols(17),

               sixteenSymbols(18)

             }

Adsl2MaxBer ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "Attributes with this syntax are configuration parameters

       that reference the maximum Bit Error Rate (BER).

       The possible values are:

         eminus3(1)   - Maximum BER=E^-3

         eminus5(2)   - Maximum BER=E^-5

         eminus7(3)   - Maximum BER=E^-7"

   SYNTAX      INTEGER {

                  eminus3(1),

                  eminus5(2),

                  eminus7(3)

               }

Adsl2ScMaskDs ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "Each one of the 512 bits in this OCTET

       STRING array represents the corresponding bin

       in the downstream direction.  A value of one

       indicates that the bin is not in use."

   SYNTAX      OCTET STRING (SIZE(0..64))

Adsl2ScMaskUs ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "Each one of the 64 bits in this OCTET

      STRING array represents the corresponding bin

      in the upstream direction.  A value of one

      indicates that the bin is not in use."

   SYNTAX      OCTET STRING (SIZE(0..8))

Adsl2RfiDs ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "Each one of the 512 bits in this OCTET

      STRING array represents the corresponding bin

      in the downstream direction.  A value of one

      indicates that the bin is part of a notch

      filter."

   SYNTAX      OCTET STRING (SIZE(0..64))

Adsl2PsdMaskDs ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "This is a structure that represents up to

      32 PSD Mask breakpoints.

      Each breakpoint occupies 3 octets: The first

      two octets hold the index of the sub-carrier

      associated with the breakpoint.  The third octet

      holds the PSD reduction at the breakpoint from 0

      (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of

      0.5 dBm/Hz."

   SYNTAX      OCTET STRING (SIZE(0..96))

Adsl2PsdMaskUs ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "This is a structure that represents up to

      4 PSD Mask breakpoints.

      Each breakpoint occupies 3 octets: The first

      two octets hold the index of the sub-carrier

      associated with the breakpoint.  The third octet

      holds the PSD reduction at the breakpoint from 0

      (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of

      0.5 dBm/Hz."

   SYNTAX      OCTET STRING (SIZE(0..12))

Adsl2Tssi ::= TEXTUAL-CONVENTION

   STATUS      current

   DESCRIPTION

      "This is a structure that represents up to

      32 transmit spectrum shaping (TSSi) breakpoints.

      Each breakpoint occupies 3 octets: The first

      two octets hold the index of the sub-carrier

      associated with the breakpoint.  The third octet

      holds the shaping parameter at the breakpoint.  It

      is a value from 0 to 127 (units of -0.5 dB).  The

      special value 127 indicates that the sub-carrier

      is not transmitted."

   SYNTAX      OCTET STRING (SIZE(0..96))

Adsl2LastTransmittedState ::= TEXTUAL-CONVENTION

     STATUS current

     DESCRIPTION

        "This parameter represents the last successfully

         transmitted initialization state in the last full

         initialization performed on the line.  States are

         per the specific xDSL technology and are numbered

         from 0 (if G.994.1 is used) or 1 (if G.994.1 is

         not used) up to Showtime."

     SYNTAX      INTEGER {

       atucG9941(0),

       atucQuiet1(1),

       atucComb1(2),

       atucQuiet2(3),

       atucComb2(4),

       atucIcomb1(5),

       atucLineprob(6),

       atucQuiet3(7),

       atucComb3(8),

       atucIComb2(9),

       atucMsgfmt(10),

       atucMsgpcb(11),

       atucQuiet4(12),

       atucReverb1(13),

       atucTref1(14),

       atucReverb2(15),

       atucEct(16),

       atucReverb3(17),

       atucTref2(18),

       atucReverb4(19),

       atucSegue1(20),

       atucMsg1(21),

       atucReverb5(22),

       atucSegue2(23),

       atucMedley(24),

       atucExchmarker(25),

       atucMsg2(26),

       atucReverb6(27),

       atucSegue3(28),

       atucParams(29),

       atucReverb7(30),

       atucSegue4(31),

       atucShowtime(32),

       --

       aturG9941(100),

       aturQuiet1(101),

       aturComb1(102),

       aturQuiet2(103),

       aturComb2(104),

       aturIcomb1(105),

       aturLineprob(106),

       aturQuiet3(107),

       aturComb3(108),

       aturIcomb2(109),

       aturMsgfmt(110),

       aturMsgpcb(111),

       aturReverb1(112),

       aturQuiet4(113),

       aturReverb2(114),

       aturQuiet5(115),

       aturReverb3(116),

       aturEct(117),

       aturReverb4(118),

       aturSegue1(119),

       aturReverb5(120),

       aturSegue2(121),

       aturMsg1(122),

       aturMedley(123),

       aturExchmarker(124),

       aturMsg2(125),

       aturReverb6(126),

       aturSegue3(127),

       aturParams(128),

       aturReverb7(129),

       aturSegue4(130),

       aturShowtime(131)

     }

Adsl2LineStatus ::= TEXTUAL-CONVENTION

   STATUS current

   DESCRIPTION

      "Attributes with this syntax are status parameters

       that reflect the failure status for a given endpoint of

       ADSL/ADSL2 or ADSL2+ link.

       This BITS structure can report the following failures:

        noDefect(0)       - This bit position positively reports

                            that no defect or failure exists.

        lossOfFrame(1)    - Loss of frame synchronization.

        lossOfSignal(2)   - Loss of signal.

        lossOfPower(3)    - Loss of power.  Usually this failure may

                            be reported for ATU-Rs only.

        initFailure(4)    - Recent initialization process failed.

                            Never active on ATU-R."

   SYNTAX BITS {

       noDefect(0),

       lossOfFrame(1),

       lossOfSignal(2),

       lossOfPower(3),

       initFailure(4)

     }

Adsl2ChAtmStatus ::= TEXTUAL-CONVENTION

   STATUS current

   DESCRIPTION

     "Attributes with this syntax are status parameters that

      reflect the failure status for Transmission Convergence (TC)

      layer of a given ATM interface (data path over an ADSL/ADSL2

      or ADSL2+ link).

      This BITS structure can report the following failures:

       noDefect(0)              - This bit position positively

                                  reports that no defect or failure

                                  exists.

       noCellDelineation(1)     - The link was successfully

                                  initialized, but cell delineation

                                  was never acquired on the

                                  associated ATM data path.

       lossOfCellDelineation(2) - Loss of cell delineation on the

                                  associated ATM data path."

   SYNTAX BITS {

       noDefect(0),

       noCellDelineation(1),

       lossOfCellDelineation(2)

     }

Adsl2ChPtmStatus ::= TEXTUAL-CONVENTION

   STATUS current

   DESCRIPTION

     "Attributes with this syntax are status parameters that

      reflect the failure status for a given PTM interface (packet

      data path over an ADSL/ADSL2 or ADSL2+ link).

      This BITS structure can report the following failures:

          noDefect(0)     - This bit position positively

                            reports that no defect or failure exists.

          outOfSync(1)    - Out of synchronization."

      SYNTAX BITS {

          noDefect(0),

          outOfSync(1)

     }

END