IANATn3270eTC-MIB DEFINITIONS ::= BEGIN

 IMPORTS

      MODULE-IDENTITY, mib-2

          FROM SNMPv2-SMI

      TEXTUAL-CONVENTION

          FROM SNMPv2-TC;

    ianaTn3270eTcMib MODULE-IDENTITY

        LAST-UPDATED "200005100000Z"  -- May 10, 2000

        ORGANIZATION "IANA"

        CONTACT-INFO

            "Internet Assigned Numbers Authority

             Postal: ICANN

                     4676 Admiralty Way, Suite 330

                     Marina del Rey, CA 90292

             Tel:    +1  310 823 9358 x20

             E-Mail: iana&iana.org"

        DESCRIPTION

            "This module defines a set of textual conventions

            for use by the TN3270E-MIB and the TN3270E-RT-MIB.

            Any additions or changes to the contents of this

            MIB module must first be discussed on the tn3270e

            working group list at: tn3270e&list.nih.gov

            and approved by one of the following TN3270E

            working group contacts:

                Ed Bailey (co-chair) - elbailey&us.ibm.com

                Michael Boe (co-chair) - mboe&cisco.com

                Ken White - kennethw&vnet.ibm.com

                Robert Moore - remoore&us.ibm.com

            The above list of contacts can be altered with

            the approval of the two co-chairs.

            The Textual Conventions defined within this MIB have

            no security issues associated with them unless

            explicitly stated in their corresponding

            DESCRIPTION clause."

     -- revision log, in reverse chronological order

        REVISION    "200005100000Z"  -- May 10, 2000

        DESCRIPTION "Fix to import mib-2 instead of experimental."

        REVISION    "199909011000Z"  -- September 1, 1999

        DESCRIPTION

            "Initial version transferred from the TN3270E

            working group to IANA."

        ::= { mib-2 61 }

  -- Textual Conventions

  IANATn3270eAddrType ::= TEXTUAL-CONVENTION

      STATUS current

      DESCRIPTION

          "The textual convention for defining the type of a

          client address.  The enumeration value unknown(0) is

          also used to indicate that no actual address is present."

      SYNTAX INTEGER {

                      unknown(0),

                      ipv4(1),

                      ipv6(2)

                     }

  IANATn3270eAddress ::= TEXTUAL-CONVENTION

      STATUS current

      DESCRIPTION

          "Denotes a client address.  The type of client address is

          determined by use of the IANATn3270eAddrType textual

convention.

          The length in octets of a IANATn3270eAddress object is:

            IANATn3270eAddrType   Address Length

            +++++++++++++++++++   ++++++++++++++

                     unknown(0)   not specified or unknown; the

                                  actual length of the

                                  IANATn3270eAddress octet string

                                  indicates if an address

                                  is present

                        ipv4(1)   4 OCTETS

                        ipv6(2)   16 OCTETS

          This textual convention is similar to the TAddress

          TC defined by RFC1903 except that it allows a

          zero-length octet string and is not a full transport

          layer address."

      SYNTAX OCTET STRING (SIZE (0..255))

  IANATn3270eClientType ::= TEXTUAL-CONVENTION

      STATUS current

      DESCRIPTION

          "The textual convention for defining the set of

           enumerations used by tn3270eTcpConnClientIdFormat

           in the TN3270E-MIB:

           ENUMERATION        OCTETs  DESCRIPTION

           none(1)              0     Not specified

           other(2)           1..512  Implementation specific

           ipv4(3)              6     4-octet IP Address plus

                                      2-octet TCP Port

           ipv6(4)              18    16-octet IPv6 Address

                                      plus 2-octet TCP Port

           domainName(5)      1..512  The DNS name of a

                                      client.

           truncDomainName(6) 1..512  The (truncated) DNS name

                                      of a client.

           string(7)          1..512  Unknown Utf8String

           certificate(8)     1..512  certificate

           userId(9)          1..8    Client's userid

           x509dn(10)         1..512  X.509 Distinguished Name

           Representation of a certificate(8) may be lead to

           a security exposure and is NOT RECOMMENDED without

           adequate security."

      SYNTAX INTEGER {

                      none(1),

                      other(2),

                      ipv4(3),

                      ipv6(4),

                      domainName(5),

                      truncDomainName(6),

                      string(7),

                      certificate(8),

                      userId(9),

                      x509dn(10)

                     }

  IANATn3270Functions ::= TEXTUAL-CONVENTION

      STATUS current

      DESCRIPTION

          "This textual convention reflects the current set of

          TN3270 and TN3270E functions that can be negotiated

          between a server and its client:

          RFC856

          transmitBinary  The sender of this command REQUESTS

                          permission to begin transmitting, or

                          confirms that it will now begin

                          transmitting characters which are to

                          be interpreted as 8 bits of binary

                          data by the receiver of the data.

          RFC860

          timingMark      The sender of this command REQUESTS

                          that the receiver of this command

                          return a WILL TIMING-MARK in the data

                          stream at the 'appropriate place'.

          RFC885

          endOfRecord     The sender of this command requests

                          permission to begin transmission of

                          the Telnet END-OF-RECORD (EOR) code

                          when transmitting data characters, or

                          the sender of this command confirms it

                          will now begin transmission of EORs

                          with transmitted data characters.

          RFC1091

          terminalType    Sender is willing to send terminal

                          type information in a subsequent

                          sub-negotiation.

          RFC1041

          tn3270Regime    Sender is willing to send list of

                          supported 3270 Regimes in a

                          subsequent sub-negotiation.

          RFC2355

          scsCtlCodes     (Printer sessions only).  Allows the

                          use of the SNA Character Stream (SCS)

                          and SCS control codes on the session.

                          SCS is used with LU type 1 SNA sessions.

          dataStreamCtl   (Printer sessions only).  Allows the use

                          of the standard 3270 data stream.  This

                          corresponds to LU type 3 SNA sessions.

          responses       Provides support for positive and

                          negative response handling.  Allows the

                          server to reflect to the client any and

                          all definite, exception, and no response

                          requests sent by the host application.

          bindImage       Allows the server to send the SNA Bind

                          image and Unbind notification to the

                          client.

          sysreq          Allows the client and server to emulate

                          some (or all, depending on the server) of

                          the functions of the SYSREQ key in an SNA

                          environment."

      SYNTAX BITS {

                   transmitBinary(0),-- rfc856

                   timemark(1),      -- rfc860

                   endOfRecord(2),   -- rfc885

                   terminalType(3),  -- rfc1091

                   tn3270Regime(4),  -- rfc1041

                   scsCtlCodes(5),   -- rfc2355

                   dataStreamCtl(6), -- rfc2355

                   responses(7),     -- rfc2355

                   bindImage(8),     -- rfc2355

                   sysreq(9)         -- rfc2355

                  }

  IANATn3270ResourceType ::= TEXTUAL-CONVENTION

      STATUS current

      DESCRIPTION

          "The type of resource defined by a resource pool.  Refer

          to tn3270eResPoolTable."

      SYNTAX INTEGER {

                      other(1),

                      terminal(2),

                      printer(3),

                      terminalOrPrinter(4)

                     }

  IANATn3270DeviceType ::= TEXTUAL-CONVENTION

      STATUS current

      DESCRIPTION

          "This textual convention defines the list of device

          types that can be set, as defined by RFC 2355."

      SYNTAX INTEGER {

                   -- terminals

                      ibm3278d2(1),    -- (24 row x 80 col display)

                      ibm3278d2E(2),   -- (24 row x 80 col display)

                      ibm3278d3(3),    -- (32 row x 80 col display)

                      ibm3278d3E(4),   -- (32 row x 80 col display)

                      ibm3278d4(5),    -- (43 row x 80 col display)

                      ibm3278d4E(6),   -- (43 row x 80 col display)

                      ibm3278d5(7),    -- (27 row x 132 col display)

                      ibm3278d5E(8),   -- (27 row x 132 col display)

                      ibmDynamic(9),   -- (no pre-defined display size)

                   -- printers

                      ibm3287d1(10),

                      unknown(100)

                     }

  IANATn3270eLogData ::= TEXTUAL-CONVENTION

      STATUS current

      DESCRIPTION

        "An octet string representing log data as pertaining to

        either a TN3270 or TN3270E Session as reported from a

        TN3270E Server. Log data is stored in an octet string

        in time order (from earliest to latest).

        Each log element has the following form:

        +------+----+---------+------------+

        !length!type!TimeStamp! data       !

        +------+----+---------+------------+

        where

        length    = one-octet length of the data portion of the

                    trace element, not including the length,

                    type, and TimeStamp fields

        type      = one-octet code point characterizing the data.

        TimeStamp = A 4-octet field representing the number of

                    TimeTicks since the TN3270E server was last

                    activated.  The server's last activation time

                    is available in the tn3270eSrvrConfLastActTime

                    object in the TN3270E MIB, which has the

                    syntax DateAndTime.

        data      = initial part of a PDU.

        length   type

          0-255  x'00' - unknown

          0      x'01' - inactivity timer expired

          0      x'02' - dynamic timer expired

          0      x'03' - actlu req

          0      x'04' - bind req

          0      x'05' - clear req

          0      x'06' - dactlu req

          0      x'07' - warm actpu req

          0      x'08' - sdt req

          0      x'09' - unbind req

          0      x'0A' - notify resp

          0      x'0B' - reply PSID neg rsp

          0      x'0C' - reply PSID pos rsp

          0      x'0D' - unbind rsp

          0      x'0E' - hierarchical reset

          0      x'0F' - client connect req

          0      x'10' - client disconnect req

          0      x'11' - timingmark received

          0      x'12' - flowControl timer expired

          0      x'13' - neg rsp to host

          0      x'14' - neg rsp from host

          0      x'15' - data contention

          0      x'16' - no buffer to send SNA data

          0      x'17' - receive response while inbound

          0      x'18' - client protocol error

          0      x'19' - badClientSequenceReceived

          1-255  x'1A' - utf8String

          2      x'1B' - hexCode, implementation dependent

          Log element entries have a minimum length of 6 octets.

          The zero-length string indicates that no log data is

          available."

      SYNTAX OCTET STRING (SIZE (0 | 6..2048))

  END