IANA-FINISHER-MIB DEFINITIONS ::= BEGIN

 -- http://www.iana.org/assignments/ianafinisher-mib

IMPORTS

    MODULE-IDENTITY,

        mib-2

            FROM SNMPv2-SMI                              -- [RFC2578]

    TEXTUAL-CONVENTION

            FROM SNMPv2-TC;                              -- [RFC2579]

ianafinisherMIB MODULE-IDENTITY

    LAST-UPDATED  "200406020000Z" -- June 2, 2004

    ORGANIZATION  "IANA"

    CONTACT-INFO  "Internet Assigned Numbers Authority

                  Postal: ICANN

                          4676 Admiralty Way, Suite 330

                          Marina del Rey, CA 90292

                  Tel:    +1 310 823 9358

                  E-Mail: iana&iana.org"

    DESCRIPTION   "This MIB module defines a set of finishing-related

                  TEXTUAL-CONVENTIONs for use in Finisher MIB (RFC 3806)

                  and other MIBs which need to specify finishing

                  mechanism details.

                  Any additions or changes to the contents of this MIB

                  module require either publication of an RFC, or

                  Designated Expert Review as defined in RFC 2434,

                  Guidelines for Writing an IANA Considerations Section

                  in RFCs.  The Designated Expert will be selected by

                  the IESG Area Director(s) of the Applications Area.

                  Copyright (C) The Internet Society (2004). The

                  initial version of this MIB module was published

                  in RFC 3806. For full legal notices see the RFC

                  itself or see:

                  http://www.ietf.org/copyrights/ianamib.html"

    REVISION      "200406020000Z"  -- June 2, 2004

    DESCRIPTION   "Original version, published in coordination

                  with Finisher MIB (RFC 3806)."

    ::= { mib-2 110 }

-- TEXTUAL-CONVENTIONs for this MIB module

FinDeviceTypeTC ::= TEXTUAL-CONVENTION

    STATUS       current

    DESCRIPTION

      "The defined finishing device subunit process

       enumerations."

    SYNTAX       INTEGER {

         other(1),

         unknown(2),

         stitcher(3),

         folder(4),

         binder(5),

         trimmer(6),

         dieCutter(7),

         puncher(8),

         perforater(9),

         slitter(10),

         separationCutter(11),

         imprinter(12),

         wrapper(13),

         bander(14),

         makeEnvelope(15),

         stacker(16),

         sheetRotator(17),

         inserter(18)

        }

FinAttributeTypeTC  ::= TEXTUAL-CONVENTION

    STATUS     current

    DESCRIPTION

        "This TEXTUAL-CONVENTION defines the set of enums for use in

         the finDeviceAttributeTable.  See section 5.7 for the complete

         specification of each attribute."

    SYNTAX       INTEGER {

         other(1),

         deviceName(3),

         deviceVendorName(4),

         deviceModel(5),

         deviceVersion(6),

         deviceSerialNumber(7),

         maximumSheets(8),

         finProcessOffsetUnits(9),

         finReferenceEdge(10),

         finAxisOffset(11),

         finJogEdge(12),

         finHeadLocation(13),

         finOperationRestrictions(14),

         finNumberOfPositions(15),

         namedConfiguration(16),

         finMediaTypeRestriction(17),

         finPrinterInputTraySupported(18),

         finPreviousFinishingOperation(19),

         finNextFinishingOperation(20),

         stitchingType(30),

         stitchingDirection(31),

         foldingType(40),

         bindingType(50),

         punchHoleType(80),

         punchHoleSizeLongDim(81),

         punchHoleSizeShortDim(82),

         punchPattern(83),

         slittingType(100),

         wrappingType(130),

         stackOutputType(160),

         stackOffset(161),

         stackRotation(162)

        }

FinEdgeTC ::= TEXTUAL-CONVENTION

    STATUS       current

    DESCRIPTION

      "Specifies an edge for a Finishing Process."

    SYNTAX       INTEGER {

         topEdge(3),

         bottomEdge(4),

         leftEdge(5),

         rightEdge(6)

        }

FinStitchingTypeTC ::= TEXTUAL-CONVENTION

    STATUS       current

    DESCRIPTION

      "The defined stitching type enumerations.  For the edgeStitch and

       stapleDual enums, the finReferenceEdge attribute is recommended

       to define the edge to which the operation applies."

    SYNTAX       INTEGER {

         other(1),         -- More information in other attributes

         unknown(2),

         stapleTopLeft(4),

         stapleBottomLeft(5),

         stapleTopRight(6),

         stapleBottomRight(7),

         saddleStitch(8),

         edgeStitch(9),

         stapleDual(10)

        }

FinStitchingDirTypeTC ::= TEXTUAL-CONVENTION

    STATUS       current

    DESCRIPTION

      "Defines the direction, relative to the top sheet in the output

       subunit, that the stitching operation was performed.  For a

       topDown(3) process, the staple will be clinched on the bottom

       of the stack.  This parameter can be used to determine what

       order the pages of a booklet are to be printed such that the

       staple clinch will be on the inside of the resulting booklet."

    SYNTAX       INTEGER {

         unknown(2),

         topDown(3),

         bottomUp(4)

        }

FinStitchingAngleTypeTC ::= TEXTUAL-CONVENTION

    STATUS       current

    DESCRIPTION

      "This enumeration provides a description of the angular

       orientation of each stitch in a single or multiple stitching

       operation, relative to the 'X' axis.  As with all finishing

       operations, the 'X' axis is always relative to the portrait

       orientation of the document regardless of the orientation

       of the printed image.  This enum is primarily applicable to

       corner stitching operations."

    SYNTAX       INTEGER {

         unknown(2),

         horizontal(3),

         vertical(4),

         slanted(5)

        }

FinFoldingTypeTC ::= TEXTUAL-CONVENTION

   STATUS       current

   DESCRIPTION

     "The defined folding device process enumerations."

   SYNTAX       INTEGER {

         other(1),        -- More information in other attributes

         unknown(2),

         zFold(3),

         halfFold(4),

         letterFold(5)

        }

FinBindingTypeTC ::= TEXTUAL-CONVENTION

    STATUS       current

    DESCRIPTION

      "The defined binding type enumerations."

    SYNTAX       INTEGER {

         other(1),          -- More information in other attributes

         unknown(2),

         tape(4),

         plastic(5),

         velo(6),

         perfect(7),

         spiral(8),

         adhesive(9),

         comb(10),

         padding(11)

        }

FinPunchHoleTypeTC ::= TEXTUAL-CONVENTION

   STATUS       current

   DESCRIPTION

     "The defined hole type punch process enumerations."

   SYNTAX       INTEGER {

         other(1),        -- More information in other attributes

         unknown(2),

         round(3),

         oblong(4),

         square(5),

         rectangular(6),

         star(7)

        }

FinPunchPatternTC ::= TEXTUAL-CONVENTION

   STATUS       current

   DESCRIPTION

     "The defined hole pattern punch process enumerations."

   SYNTAX       INTEGER {

         other(1),           --Pattern to be defined in other attributes

         unknown(2),

         twoHoleUSTop(4),    --Letter/legal, 8.5 inch edge

         threeHoleUS(5),     --Letter/ledger, 11 inch edge

         twoHoleDIN(6),      --A4/A3, 297 mm edge

         fourHoleDIN(7),     --A4/A3, 297 mm edge

         twentyTwoHoleUS(8), --Letter/ledger, 11 inch edge

         nineteenHoleUS(9),  --Letter/ledger, 11 inch edge

         twoHoleMetric(10),  --B5/B4, 257 mm edge

         swedish4Hole(11),   --A4/A3, 297 mm edge

         twoHoleUSSide(12),  --Letter/ledger, 11 inch edge

         fiveHoleUS(13),     --Letter/ledger, 11 inch edge

         sevenHoleUS(14),    --Letter/ledger, 11 inch edge

         mixed7H4S(15),      --A4/A3, 297 mm edge

         norweg6Hole(16),    --A4/A3, 297 mm edge

         metric26Hole(17),   --B5/B4, 257 mm edge

         metric30Hole(18)    --A4/A3, 297 mm edge

        }

FinSlittingTypeTC ::= TEXTUAL-CONVENTION

    STATUS       current

    DESCRIPTION

      "The defined slitting type enumerations."

    SYNTAX       INTEGER {

         other(1),         -- More information in other attributes

         unknown(2),

         slitAndSeparate(4),

         slitAndMerge(5)

        }

FinWrappingTypeTC ::= TEXTUAL-CONVENTION

   STATUS       current

   DESCRIPTION

     "The defined wrapping device process enumerations."

   SYNTAX       INTEGER {

         other(1),        -- More information in other attributes

         unknown(2),

         shrinkWrap(4),

         paperWrap(5)

        }

FinStackOutputTypeTC ::= TEXTUAL-CONVENTION

   STATUS       current

   DESCRIPTION

     "The defined stack output type enumerations."

   SYNTAX       INTEGER {

         other(1),        -- More information in other attributes

         unknown(2),

         straight(4),     -- No offset, one on top of another

         offset(5),

         crissCross(6)    -- Rotated

        }

END