From 3ff1e70f7bac46fb903452369816664ef8509602 Mon Sep 17 00:00:00 2001 From: Packit Date: Sep 14 2020 13:46:50 +0000 Subject: libquvi-0.9.4 base --- diff --git a/ABOUT-NLS b/ABOUT-NLS new file mode 100644 index 0000000..b1de1b6 --- /dev/null +++ b/ABOUT-NLS @@ -0,0 +1,1282 @@ +1 Notes on the Free Translation Project +*************************************** + +Free software is going international! The Free Translation Project is +a way to get maintainers of free software, translators, and users all +together, so that free software will gradually become able to speak many +languages. A few packages already provide translations for their +messages. + + If you found this `ABOUT-NLS' file inside a distribution, you may +assume that the distributed package does use GNU `gettext' internally, +itself available at your nearest GNU archive site. But you do _not_ +need to install GNU `gettext' prior to configuring, installing or using +this package with messages translated. + + Installers will find here some useful hints. These notes also +explain how users should proceed for getting the programs to use the +available translations. They tell how people wanting to contribute and +work on translations can contact the appropriate team. + +1.1 INSTALL Matters +=================== + +Some packages are "localizable" when properly installed; the programs +they contain can be made to speak your own native language. Most such +packages use GNU `gettext'. Other packages have their own ways to +internationalization, predating GNU `gettext'. + + By default, this package will be installed to allow translation of +messages. It will automatically detect whether the system already +provides the GNU `gettext' functions. Installers may use special +options at configuration time for changing the default behaviour. The +command: + + ./configure --disable-nls + +will _totally_ disable translation of messages. + + When you already have GNU `gettext' installed on your system and run +configure without an option for your new package, `configure' will +probably detect the previously built and installed `libintl' library +and will decide to use it. If not, you may have to to use the +`--with-libintl-prefix' option to tell `configure' where to look for it. + + Internationalized packages usually have many `po/LL.po' files, where +LL gives an ISO 639 two-letter code identifying the language. Unless +translations have been forbidden at `configure' time by using the +`--disable-nls' switch, all available translations are installed +together with the package. However, the environment variable `LINGUAS' +may be set, prior to configuration, to limit the installed set. +`LINGUAS' should then contain a space separated list of two-letter +codes, stating which languages are allowed. + +1.2 Using This Package +====================== + +As a user, if your language has been installed for this package, you +only have to set the `LANG' environment variable to the appropriate +`LL_CC' combination. If you happen to have the `LC_ALL' or some other +`LC_xxx' environment variables set, you should unset them before +setting `LANG', otherwise the setting of `LANG' will not have the +desired effect. Here `LL' is an ISO 639 two-letter language code, and +`CC' is an ISO 3166 two-letter country code. For example, let's +suppose that you speak German and live in Germany. At the shell +prompt, merely execute `setenv LANG de_DE' (in `csh'), +`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash'). +This can be done from your `.login' or `.profile' file, once and for +all. + + You might think that the country code specification is redundant. +But in fact, some languages have dialects in different countries. For +example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The +country code serves to distinguish the dialects. + + The locale naming convention of `LL_CC', with `LL' denoting the +language and `CC' denoting the country, is the one use on systems based +on GNU libc. On other systems, some variations of this scheme are +used, such as `LL' or `LL_CC.ENCODING'. You can get the list of +locales supported by your system for your language by running the +command `locale -a | grep '^LL''. + + Not all programs have translations for all languages. By default, an +English message is shown in place of a nonexistent translation. If you +understand other languages, you can set up a priority list of languages. +This is done through a different environment variable, called +`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG' +for the purpose of message handling, but you still need to have `LANG' +set to the primary language; this is required by other parts of the +system libraries. For example, some Swedish users who would rather +read translations in German than English for when Swedish is not +available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'. + + Special advice for Norwegian users: The language code for Norwegian +bokma*l changed from `no' to `nb' recently (in 2003). During the +transition period, while some message catalogs for this language are +installed under `nb' and some older ones under `no', it's recommended +for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and +older translations are used. + + In the `LANGUAGE' environment variable, but not in the `LANG' +environment variable, `LL_CC' combinations can be abbreviated as `LL' +to denote the language's main dialect. For example, `de' is equivalent +to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT' +(Portuguese as spoken in Portugal) in this context. + +1.3 Translating Teams +===================== + +For the Free Translation Project to be a success, we need interested +people who like their own language and write it well, and who are also +able to synergize with other translators speaking the same language. +Each translation team has its own mailing list. The up-to-date list of +teams can be found at the Free Translation Project's homepage, +`http://translationproject.org/', in the "Teams" area. + + If you'd like to volunteer to _work_ at translating messages, you +should become a member of the translating team for your own language. +The subscribing address is _not_ the same as the list itself, it has +`-request' appended. For example, speakers of Swedish can send a +message to `sv-request@li.org', having this message body: + + subscribe + + Keep in mind that team members are expected to participate +_actively_ in translations, or at solving translational difficulties, +rather than merely lurking around. If your team does not exist yet and +you want to start one, or if you are unsure about what to do or how to +get started, please write to `coordinator@translationproject.org' to +reach the coordinator for all translator teams. + + The English team is special. It works at improving and uniformizing +the terminology in use. Proven linguistic skills are praised more than +programming skills, here. + +1.4 Available Packages +====================== + +Languages are not equally supported in all packages. The following +matrix shows the current state of internationalization, as of June +2010. The matrix shows, in regard of each package, for which languages +PO files have been submitted to translation coordination, with a +translation percentage of at least 50%. + + Ready PO files af am an ar as ast az be be@latin bg bn_IN bs ca + +--------------------------------------------------+ + a2ps | [] [] | + aegis | | + ant-phone | | + anubis | | + aspell | [] [] | + bash | | + bfd | | + bibshelf | [] | + binutils | | + bison | | + bison-runtime | [] | + bluez-pin | [] [] | + bombono-dvd | | + buzztard | | + cflow | | + clisp | | + coreutils | [] [] | + cpio | | + cppi | | + cpplib | [] | + cryptsetup | | + dfarc | | + dialog | [] [] | + dico | | + diffutils | [] | + dink | | + doodle | | + e2fsprogs | [] | + enscript | [] | + exif | | + fetchmail | [] | + findutils | [] | + flex | [] | + freedink | | + gas | | + gawk | [] [] | + gcal | [] | + gcc | | + gettext-examples | [] [] [] [] | + gettext-runtime | [] [] | + gettext-tools | [] [] | + gip | [] | + gjay | | + gliv | [] | + glunarclock | [] [] | + gnubiff | | + gnucash | [] | + gnuedu | | + gnulib | | + gnunet | | + gnunet-gtk | | + gnutls | | + gold | | + gpe-aerial | | + gpe-beam | | + gpe-bluetooth | | + gpe-calendar | | + gpe-clock | [] | + gpe-conf | | + gpe-contacts | | + gpe-edit | | + gpe-filemanager | | + gpe-go | | + gpe-login | | + gpe-ownerinfo | [] | + gpe-package | | + gpe-sketchbook | | + gpe-su | [] | + gpe-taskmanager | [] | + gpe-timesheet | [] | + gpe-today | [] | + gpe-todo | | + gphoto2 | | + gprof | [] | + gpsdrive | | + gramadoir | | + grep | | + grub | [] [] | + gsasl | | + gss | | + gst-plugins-bad | [] | + gst-plugins-base | [] | + gst-plugins-good | [] | + gst-plugins-ugly | [] | + gstreamer | [] [] [] | + gtick | | + gtkam | [] | + gtkorphan | [] | + gtkspell | [] [] [] | + gutenprint | | + hello | [] | + help2man | | + hylafax | | + idutils | | + indent | [] [] | + iso_15924 | | + iso_3166 | [] [] [] [] [] [] [] | + iso_3166_2 | | + iso_4217 | | + iso_639 | [] [] [] [] | + iso_639_3 | | + jwhois | | + kbd | | + keytouch | [] | + keytouch-editor | | + keytouch-keyboa... | [] | + klavaro | [] | + latrine | | + ld | [] | + leafpad | [] [] | + libc | [] [] | + libexif | () | + libextractor | | + libgnutls | | + libgpewidget | | + libgpg-error | | + libgphoto2 | | + libgphoto2_port | | + libgsasl | | + libiconv | [] | + libidn | | + lifelines | | + liferea | [] [] | + lilypond | | + linkdr | [] | + lordsawar | | + lprng | | + lynx | [] | + m4 | | + mailfromd | | + mailutils | | + make | | + man-db | | + man-db-manpages | | + minicom | | + mkisofs | | + myserver | | + nano | [] [] | + opcodes | | + parted | | + pies | | + popt | | + psmisc | | + pspp | [] | + pwdutils | | + radius | [] | + recode | [] [] | + rosegarden | | + rpm | | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] [] | + sed | [] [] | + sharutils | [] [] | + shishi | | + skencil | | + solfege | | + solfege-manual | | + soundtracker | | + sp | | + sysstat | | + tar | [] | + texinfo | | + tin | | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] | + vice | | + vmm | | + vorbis-tools | | + wastesedge | | + wdiff | | + wget | [] [] | + wyslij-po | | + xchat | [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] | + +--------------------------------------------------+ + af am an ar as ast az be be@latin bg bn_IN bs ca + 6 0 1 2 3 19 1 10 3 28 3 1 38 + + crh cs da de el en en_GB en_ZA eo es et eu fa + +-------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] | + aegis | [] [] [] | + ant-phone | [] () | + anubis | [] [] | + aspell | [] [] [] [] [] | + bash | [] [] [] | + bfd | [] | + bibshelf | [] [] [] | + binutils | [] | + bison | [] [] | + bison-runtime | [] [] [] [] | + bluez-pin | [] [] [] [] [] [] | + bombono-dvd | [] | + buzztard | [] [] [] | + cflow | [] [] | + clisp | [] [] [] [] | + coreutils | [] [] [] [] | + cpio | | + cppi | | + cpplib | [] [] [] | + cryptsetup | [] | + dfarc | [] [] [] | + dialog | [] [] [] [] [] | + dico | | + diffutils | [] [] [] [] [] [] | + dink | [] [] [] | + doodle | [] | + e2fsprogs | [] [] [] | + enscript | [] [] [] | + exif | () [] [] | + fetchmail | [] [] () [] [] [] | + findutils | [] [] [] | + flex | [] [] | + freedink | [] [] [] | + gas | [] | + gawk | [] [] [] | + gcal | [] | + gcc | [] [] | + gettext-examples | [] [] [] [] | + gettext-runtime | [] [] [] [] | + gettext-tools | [] [] [] | + gip | [] [] [] [] | + gjay | [] | + gliv | [] [] [] | + glunarclock | [] [] | + gnubiff | () | + gnucash | [] () () () () | + gnuedu | [] [] | + gnulib | [] [] | + gnunet | | + gnunet-gtk | [] | + gnutls | [] [] | + gold | [] | + gpe-aerial | [] [] [] [] | + gpe-beam | [] [] [] [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] | + gpe-clock | [] [] [] [] | + gpe-conf | [] [] [] | + gpe-contacts | [] [] [] | + gpe-edit | [] [] | + gpe-filemanager | [] [] [] | + gpe-go | [] [] [] [] | + gpe-login | [] [] | + gpe-ownerinfo | [] [] [] [] | + gpe-package | [] [] [] | + gpe-sketchbook | [] [] [] [] | + gpe-su | [] [] [] [] | + gpe-taskmanager | [] [] [] [] | + gpe-timesheet | [] [] [] [] | + gpe-today | [] [] [] [] | + gpe-todo | [] [] [] | + gphoto2 | [] [] () [] [] [] | + gprof | [] [] [] | + gpsdrive | [] [] [] | + gramadoir | [] [] [] | + grep | [] | + grub | [] [] | + gsasl | [] | + gss | | + gst-plugins-bad | [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] () [] | + gtkam | [] [] () [] [] | + gtkorphan | [] [] [] [] | + gtkspell | [] [] [] [] [] [] [] | + gutenprint | [] [] [] | + hello | [] [] [] [] | + help2man | [] | + hylafax | [] [] | + idutils | [] [] | + indent | [] [] [] [] [] [] [] | + iso_15924 | [] () [] [] | + iso_3166 | [] [] [] [] () [] [] [] () | + iso_3166_2 | () | + iso_4217 | [] [] [] () [] [] | + iso_639 | [] [] [] [] () [] [] | + iso_639_3 | [] | + jwhois | [] | + kbd | [] [] [] [] [] | + keytouch | [] [] | + keytouch-editor | [] [] | + keytouch-keyboa... | [] | + klavaro | [] [] [] [] | + latrine | [] () | + ld | [] [] | + leafpad | [] [] [] [] [] [] | + libc | [] [] [] [] | + libexif | [] [] () | + libextractor | | + libgnutls | [] | + libgpewidget | [] [] | + libgpg-error | [] [] | + libgphoto2 | [] () | + libgphoto2_port | [] () [] | + libgsasl | | + libiconv | [] [] [] [] [] | + libidn | [] [] [] | + lifelines | [] () | + liferea | [] [] [] [] [] | + lilypond | [] [] [] | + linkdr | [] [] [] | + lordsawar | [] | + lprng | | + lynx | [] [] [] [] | + m4 | [] [] [] [] | + mailfromd | | + mailutils | [] | + make | [] [] [] | + man-db | | + man-db-manpages | | + minicom | [] [] [] [] | + mkisofs | | + myserver | | + nano | [] [] [] | + opcodes | [] [] | + parted | [] [] | + pies | | + popt | [] [] [] [] [] | + psmisc | [] [] [] | + pspp | [] | + pwdutils | [] | + radius | [] | + recode | [] [] [] [] [] [] | + rosegarden | () () () | + rpm | [] [] [] | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] [] [] [] | + sed | [] [] [] [] [] [] | + sharutils | [] [] [] [] | + shishi | | + skencil | [] () [] | + solfege | [] [] [] | + solfege-manual | [] [] | + soundtracker | [] [] [] | + sp | [] | + sysstat | [] [] [] | + tar | [] [] [] [] | + texinfo | [] [] [] | + tin | [] [] | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] [] [] [] | + vice | () () | + vmm | [] | + vorbis-tools | [] [] | + wastesedge | [] | + wdiff | [] [] | + wget | [] [] [] | + wyslij-po | | + xchat | [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] [] | + +-------------------------------------------------+ + crh cs da de el en en_GB en_ZA eo es et eu fa + 5 64 105 117 18 1 8 0 28 89 18 19 0 + + fi fr ga gl gu he hi hr hu hy id is it ja ka kn + +----------------------------------------------------+ + a2ps | [] [] [] [] | + aegis | [] [] | + ant-phone | [] [] | + anubis | [] [] [] [] | + aspell | [] [] [] [] | + bash | [] [] [] [] | + bfd | [] [] [] | + bibshelf | [] [] [] [] [] | + binutils | [] [] [] | + bison | [] [] [] [] | + bison-runtime | [] [] [] [] [] [] | + bluez-pin | [] [] [] [] [] [] [] [] | + bombono-dvd | [] | + buzztard | [] | + cflow | [] [] [] | + clisp | [] | + coreutils | [] [] [] [] [] | + cpio | [] [] [] [] | + cppi | [] [] | + cpplib | [] [] [] | + cryptsetup | [] [] [] | + dfarc | [] [] [] | + dialog | [] [] [] [] [] [] [] | + dico | | + diffutils | [] [] [] [] [] [] [] [] [] | + dink | [] | + doodle | [] [] | + e2fsprogs | [] [] | + enscript | [] [] [] [] | + exif | [] [] [] [] [] [] | + fetchmail | [] [] [] [] | + findutils | [] [] [] [] [] [] | + flex | [] [] [] | + freedink | [] [] [] | + gas | [] [] | + gawk | [] [] [] [] () [] | + gcal | [] | + gcc | [] | + gettext-examples | [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] | + gettext-tools | [] [] [] [] | + gip | [] [] [] [] [] [] | + gjay | [] | + gliv | [] () | + glunarclock | [] [] [] [] | + gnubiff | () [] () | + gnucash | () () () () () [] | + gnuedu | [] [] | + gnulib | [] [] [] [] [] [] | + gnunet | | + gnunet-gtk | [] | + gnutls | [] [] | + gold | [] [] | + gpe-aerial | [] [] [] | + gpe-beam | [] [] [] [] | + gpe-bluetooth | [] [] [] [] | + gpe-calendar | [] [] | + gpe-clock | [] [] [] [] [] | + gpe-conf | [] [] [] [] | + gpe-contacts | [] [] [] [] | + gpe-edit | [] [] [] | + gpe-filemanager | [] [] [] [] | + gpe-go | [] [] [] [] [] | + gpe-login | [] [] [] | + gpe-ownerinfo | [] [] [] [] [] | + gpe-package | [] [] [] | + gpe-sketchbook | [] [] [] [] | + gpe-su | [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] | + gpe-timesheet | [] [] [] [] [] | + gpe-today | [] [] [] [] [] [] [] | + gpe-todo | [] [] [] | + gphoto2 | [] [] [] [] [] [] | + gprof | [] [] [] [] | + gpsdrive | [] [] [] | + gramadoir | [] [] [] | + grep | [] [] | + grub | [] [] [] [] | + gsasl | [] [] [] [] [] | + gss | [] [] [] [] [] | + gst-plugins-bad | [] [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] [] [] [] [] | + gtkam | [] [] [] [] [] | + gtkorphan | [] [] [] | + gtkspell | [] [] [] [] [] [] [] [] [] | + gutenprint | [] [] [] [] | + hello | [] [] [] | + help2man | [] [] | + hylafax | [] | + idutils | [] [] [] [] [] [] | + indent | [] [] [] [] [] [] [] [] | + iso_15924 | [] () [] [] | + iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] | + iso_3166_2 | () [] [] [] | + iso_4217 | [] () [] [] [] [] | + iso_639 | [] () [] [] [] [] [] [] [] | + iso_639_3 | () [] [] | + jwhois | [] [] [] [] [] | + kbd | [] [] | + keytouch | [] [] [] [] [] [] | + keytouch-editor | [] [] [] [] [] | + keytouch-keyboa... | [] [] [] [] [] | + klavaro | [] [] | + latrine | [] [] [] | + ld | [] [] [] [] | + leafpad | [] [] [] [] [] [] [] () | + libc | [] [] [] [] [] | + libexif | [] | + libextractor | | + libgnutls | [] [] | + libgpewidget | [] [] [] [] | + libgpg-error | [] [] | + libgphoto2 | [] [] [] | + libgphoto2_port | [] [] [] | + libgsasl | [] [] [] [] [] | + libiconv | [] [] [] [] [] [] | + libidn | [] [] [] [] | + lifelines | () | + liferea | [] [] [] [] | + lilypond | [] [] | + linkdr | [] [] [] [] [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] [] [] | + m4 | [] [] [] [] [] [] | + mailfromd | | + mailutils | [] [] | + make | [] [] [] [] [] [] [] [] [] | + man-db | [] [] | + man-db-manpages | [] | + minicom | [] [] [] [] [] | + mkisofs | [] [] [] [] | + myserver | | + nano | [] [] [] [] [] [] | + opcodes | [] [] [] [] | + parted | [] [] [] [] | + pies | | + popt | [] [] [] [] [] [] [] [] [] | + psmisc | [] [] [] | + pspp | | + pwdutils | [] [] | + radius | [] [] | + recode | [] [] [] [] [] [] [] [] | + rosegarden | () () () () () | + rpm | [] [] | + rush | | + sarg | [] | + screem | [] [] | + scrollkeeper | [] [] [] [] | + sed | [] [] [] [] [] [] [] [] | + sharutils | [] [] [] [] [] [] [] | + shishi | [] | + skencil | [] | + solfege | [] [] [] [] | + solfege-manual | [] [] | + soundtracker | [] [] | + sp | [] () | + sysstat | [] [] [] [] [] | + tar | [] [] [] [] [] [] [] | + texinfo | [] [] [] [] | + tin | [] | + unicode-han-tra... | | + unicode-transla... | [] [] | + util-linux-ng | [] [] [] [] [] [] | + vice | () () () | + vmm | [] | + vorbis-tools | [] | + wastesedge | () () | + wdiff | [] | + wget | [] [] [] [] [] [] [] [] | + wyslij-po | [] [] [] | + xchat | [] [] [] [] [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] | + +----------------------------------------------------+ + fi fr ga gl gu he hi hr hu hy id is it ja ka kn + 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4 + + ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne + +-----------------------------------------------+ + a2ps | [] | + aegis | | + ant-phone | | + anubis | [] [] | + aspell | [] | + bash | | + bfd | | + bibshelf | [] [] | + binutils | | + bison | [] | + bison-runtime | [] [] [] [] [] | + bluez-pin | [] [] [] [] [] | + bombono-dvd | | + buzztard | | + cflow | | + clisp | | + coreutils | [] | + cpio | | + cppi | | + cpplib | | + cryptsetup | | + dfarc | [] | + dialog | [] [] [] [] [] | + dico | | + diffutils | [] [] | + dink | | + doodle | | + e2fsprogs | | + enscript | | + exif | [] | + fetchmail | | + findutils | | + flex | | + freedink | [] | + gas | | + gawk | | + gcal | | + gcc | | + gettext-examples | [] [] [] [] | + gettext-runtime | [] | + gettext-tools | [] | + gip | [] [] | + gjay | | + gliv | | + glunarclock | [] | + gnubiff | | + gnucash | () () () () | + gnuedu | | + gnulib | | + gnunet | | + gnunet-gtk | | + gnutls | [] | + gold | | + gpe-aerial | [] | + gpe-beam | [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] | + gpe-clock | [] [] [] [] [] | + gpe-conf | [] [] | + gpe-contacts | [] [] | + gpe-edit | [] | + gpe-filemanager | [] [] | + gpe-go | [] [] [] | + gpe-login | [] | + gpe-ownerinfo | [] [] | + gpe-package | [] [] | + gpe-sketchbook | [] [] | + gpe-su | [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] [] | + gpe-timesheet | [] [] | + gpe-today | [] [] [] [] | + gpe-todo | [] [] | + gphoto2 | | + gprof | [] | + gpsdrive | | + gramadoir | | + grep | | + grub | | + gsasl | | + gss | | + gst-plugins-bad | [] [] [] [] | + gst-plugins-base | [] [] | + gst-plugins-good | [] [] | + gst-plugins-ugly | [] [] [] [] [] | + gstreamer | | + gtick | | + gtkam | [] | + gtkorphan | [] [] | + gtkspell | [] [] [] [] [] [] [] | + gutenprint | | + hello | [] [] [] | + help2man | | + hylafax | | + idutils | | + indent | | + iso_15924 | [] [] | + iso_3166 | [] [] () [] [] [] [] [] | + iso_3166_2 | | + iso_4217 | [] [] | + iso_639 | [] [] | + iso_639_3 | [] | + jwhois | [] | + kbd | | + keytouch | [] | + keytouch-editor | [] | + keytouch-keyboa... | [] | + klavaro | [] | + latrine | [] | + ld | | + leafpad | [] [] [] | + libc | [] | + libexif | | + libextractor | | + libgnutls | [] | + libgpewidget | [] [] | + libgpg-error | | + libgphoto2 | | + libgphoto2_port | | + libgsasl | | + libiconv | | + libidn | | + lifelines | | + liferea | | + lilypond | | + linkdr | | + lordsawar | | + lprng | | + lynx | | + m4 | | + mailfromd | | + mailutils | | + make | [] | + man-db | | + man-db-manpages | | + minicom | [] | + mkisofs | | + myserver | | + nano | [] [] | + opcodes | | + parted | | + pies | | + popt | [] [] [] | + psmisc | | + pspp | | + pwdutils | | + radius | | + recode | | + rosegarden | | + rpm | | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] | + sed | | + sharutils | | + shishi | | + skencil | | + solfege | [] | + solfege-manual | | + soundtracker | | + sp | | + sysstat | [] | + tar | [] | + texinfo | [] | + tin | | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | | + vice | | + vmm | | + vorbis-tools | | + wastesedge | | + wdiff | | + wget | [] | + wyslij-po | | + xchat | [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +-----------------------------------------------+ + ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne + 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1 + + nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr + +---------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] [] | + aegis | [] [] [] | + ant-phone | [] [] | + anubis | [] [] [] | + aspell | [] [] [] [] [] | + bash | [] [] | + bfd | [] | + bibshelf | [] [] | + binutils | [] [] | + bison | [] [] [] | + bison-runtime | [] [] [] [] [] [] [] | + bluez-pin | [] [] [] [] [] [] [] [] | + bombono-dvd | [] () | + buzztard | [] [] | + cflow | [] | + clisp | [] [] | + coreutils | [] [] [] [] [] [] | + cpio | [] [] [] | + cppi | [] | + cpplib | [] | + cryptsetup | [] | + dfarc | [] | + dialog | [] [] [] [] | + dico | [] | + diffutils | [] [] [] [] [] [] | + dink | () | + doodle | [] [] | + e2fsprogs | [] [] | + enscript | [] [] [] [] [] | + exif | [] [] [] () [] | + fetchmail | [] [] [] [] | + findutils | [] [] [] [] [] | + flex | [] [] [] [] [] | + freedink | [] [] | + gas | | + gawk | [] [] [] [] | + gcal | | + gcc | [] | + gettext-examples | [] [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] [] [] [] | + gettext-tools | [] [] [] [] [] [] | + gip | [] [] [] [] [] | + gjay | | + gliv | [] [] [] [] [] [] | + glunarclock | [] [] [] [] [] | + gnubiff | [] () | + gnucash | [] () () () | + gnuedu | [] | + gnulib | [] [] [] [] | + gnunet | | + gnunet-gtk | | + gnutls | [] [] | + gold | | + gpe-aerial | [] [] [] [] [] [] [] | + gpe-beam | [] [] [] [] [] [] [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] [] [] [] | + gpe-clock | [] [] [] [] [] [] [] [] | + gpe-conf | [] [] [] [] [] [] [] | + gpe-contacts | [] [] [] [] [] | + gpe-edit | [] [] [] | + gpe-filemanager | [] [] [] | + gpe-go | [] [] [] [] [] [] [] [] | + gpe-login | [] [] | + gpe-ownerinfo | [] [] [] [] [] [] [] [] | + gpe-package | [] [] | + gpe-sketchbook | [] [] [] [] [] [] [] | + gpe-su | [] [] [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] [] [] [] | + gpe-timesheet | [] [] [] [] [] [] [] [] | + gpe-today | [] [] [] [] [] [] [] [] | + gpe-todo | [] [] [] [] [] | + gphoto2 | [] [] [] [] [] [] [] [] | + gprof | [] [] [] | + gpsdrive | [] [] | + gramadoir | [] [] | + grep | [] [] [] [] | + grub | [] [] [] | + gsasl | [] [] [] [] | + gss | [] [] [] | + gst-plugins-bad | [] [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] [] [] | + gtkam | [] [] [] [] [] [] | + gtkorphan | [] | + gtkspell | [] [] [] [] [] [] [] [] [] [] | + gutenprint | [] [] | + hello | [] [] [] [] | + help2man | [] [] | + hylafax | [] | + idutils | [] [] [] [] [] | + indent | [] [] [] [] [] [] [] | + iso_15924 | [] [] [] [] | + iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] | + iso_3166_2 | [] [] [] | + iso_4217 | [] [] [] [] [] [] [] [] | + iso_639 | [] [] [] [] [] [] [] [] [] | + iso_639_3 | [] [] | + jwhois | [] [] [] [] | + kbd | [] [] [] | + keytouch | [] [] [] | + keytouch-editor | [] [] [] | + keytouch-keyboa... | [] [] [] | + klavaro | [] [] | + latrine | [] [] | + ld | | + leafpad | [] [] [] [] [] [] [] [] [] | + libc | [] [] [] [] | + libexif | [] [] () [] | + libextractor | | + libgnutls | [] [] | + libgpewidget | [] [] [] | + libgpg-error | [] [] | + libgphoto2 | [] [] | + libgphoto2_port | [] [] [] [] [] | + libgsasl | [] [] [] [] [] | + libiconv | [] [] [] [] [] | + libidn | [] [] | + lifelines | [] [] | + liferea | [] [] [] [] [] () () [] | + lilypond | [] | + linkdr | [] [] [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] | + m4 | [] [] [] [] [] | + mailfromd | [] | + mailutils | [] | + make | [] [] [] [] | + man-db | [] [] [] | + man-db-manpages | [] [] [] | + minicom | [] [] [] [] | + mkisofs | [] [] [] | + myserver | | + nano | [] [] [] [] | + opcodes | [] [] | + parted | [] [] [] [] | + pies | [] | + popt | [] [] [] [] | + psmisc | [] [] [] | + pspp | [] [] | + pwdutils | [] | + radius | [] [] [] | + recode | [] [] [] [] [] [] [] [] | + rosegarden | () () | + rpm | [] [] [] | + rush | [] [] | + sarg | | + screem | | + scrollkeeper | [] [] [] [] [] [] [] [] | + sed | [] [] [] [] [] [] [] [] [] | + sharutils | [] [] [] [] | + shishi | [] | + skencil | [] [] | + solfege | [] [] [] [] | + solfege-manual | [] [] [] | + soundtracker | [] | + sp | | + sysstat | [] [] [] [] | + tar | [] [] [] [] | + texinfo | [] [] [] [] | + tin | [] | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] [] [] [] [] | + vice | [] | + vmm | [] | + vorbis-tools | [] [] | + wastesedge | [] | + wdiff | [] [] | + wget | [] [] [] [] [] [] [] | + wyslij-po | [] [] [] | + xchat | [] [] [] [] [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +---------------------------------------------------+ + nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr + 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37 + + sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW + +---------------------------------------------------+ + a2ps | [] [] [] [] [] | 27 + aegis | [] | 9 + ant-phone | [] [] [] [] | 9 + anubis | [] [] [] [] | 15 + aspell | [] [] [] | 20 + bash | [] [] [] | 12 + bfd | [] | 6 + bibshelf | [] [] [] | 16 + binutils | [] [] | 8 + bison | [] [] | 12 + bison-runtime | [] [] [] [] [] [] | 29 + bluez-pin | [] [] [] [] [] [] [] [] | 37 + bombono-dvd | [] | 4 + buzztard | [] | 7 + cflow | [] [] [] | 9 + clisp | | 10 + coreutils | [] [] [] [] | 22 + cpio | [] [] [] [] [] [] | 13 + cppi | [] [] | 5 + cpplib | [] [] [] [] [] [] | 14 + cryptsetup | [] [] | 7 + dfarc | [] | 9 + dialog | [] [] [] [] [] [] [] | 30 + dico | [] | 2 + diffutils | [] [] [] [] [] [] | 30 + dink | | 4 + doodle | [] [] | 7 + e2fsprogs | [] [] [] | 11 + enscript | [] [] [] [] | 17 + exif | [] [] [] | 16 + fetchmail | [] [] [] | 17 + findutils | [] [] [] [] [] | 20 + flex | [] [] [] [] | 15 + freedink | [] | 10 + gas | [] | 4 + gawk | [] [] [] [] | 18 + gcal | [] [] | 5 + gcc | [] [] [] | 7 + gettext-examples | [] [] [] [] [] [] [] | 34 + gettext-runtime | [] [] [] [] [] [] [] | 29 + gettext-tools | [] [] [] [] [] [] | 22 + gip | [] [] [] [] | 22 + gjay | [] | 3 + gliv | [] [] [] | 14 + glunarclock | [] [] [] [] [] | 19 + gnubiff | [] [] | 4 + gnucash | () [] () [] () | 10 + gnuedu | [] [] | 7 + gnulib | [] [] [] [] | 16 + gnunet | [] | 1 + gnunet-gtk | [] [] [] | 5 + gnutls | [] [] [] | 10 + gold | [] | 4 + gpe-aerial | [] [] [] | 18 + gpe-beam | [] [] [] | 19 + gpe-bluetooth | [] [] [] | 13 + gpe-calendar | [] [] [] [] | 12 + gpe-clock | [] [] [] [] [] | 28 + gpe-conf | [] [] [] [] | 20 + gpe-contacts | [] [] [] | 17 + gpe-edit | [] [] [] | 12 + gpe-filemanager | [] [] [] [] | 16 + gpe-go | [] [] [] [] [] | 25 + gpe-login | [] [] [] | 11 + gpe-ownerinfo | [] [] [] [] [] | 25 + gpe-package | [] [] [] | 13 + gpe-sketchbook | [] [] [] | 20 + gpe-su | [] [] [] [] [] | 30 + gpe-taskmanager | [] [] [] [] [] | 29 + gpe-timesheet | [] [] [] [] [] | 25 + gpe-today | [] [] [] [] [] [] | 30 + gpe-todo | [] [] [] [] | 17 + gphoto2 | [] [] [] [] [] | 24 + gprof | [] [] [] | 15 + gpsdrive | [] [] [] | 11 + gramadoir | [] [] [] | 11 + grep | [] [] [] | 10 + grub | [] [] [] | 14 + gsasl | [] [] [] [] | 14 + gss | [] [] [] | 11 + gst-plugins-bad | [] [] [] [] | 26 + gst-plugins-base | [] [] [] [] [] | 24 + gst-plugins-good | [] [] [] [] | 24 + gst-plugins-ugly | [] [] [] [] [] | 29 + gstreamer | [] [] [] [] | 22 + gtick | [] [] [] | 13 + gtkam | [] [] [] | 20 + gtkorphan | [] [] [] | 14 + gtkspell | [] [] [] [] [] [] [] [] [] | 45 + gutenprint | [] | 10 + hello | [] [] [] [] [] [] | 21 + help2man | [] [] | 7 + hylafax | [] | 5 + idutils | [] [] [] [] | 17 + indent | [] [] [] [] [] [] | 30 + iso_15924 | () [] () [] [] | 16 + iso_3166 | [] [] () [] [] () [] [] [] () | 53 + iso_3166_2 | () [] () [] | 9 + iso_4217 | [] () [] [] () [] [] | 26 + iso_639 | [] [] [] () [] () [] [] [] [] | 38 + iso_639_3 | [] () | 8 + jwhois | [] [] [] [] [] | 16 + kbd | [] [] [] [] [] | 15 + keytouch | [] [] [] | 16 + keytouch-editor | [] [] [] | 14 + keytouch-keyboa... | [] [] [] | 14 + klavaro | [] | 11 + latrine | [] [] [] | 10 + ld | [] [] [] [] | 11 + leafpad | [] [] [] [] [] [] | 33 + libc | [] [] [] [] [] | 21 + libexif | [] () | 7 + libextractor | [] | 1 + libgnutls | [] [] [] | 9 + libgpewidget | [] [] [] | 14 + libgpg-error | [] [] [] | 9 + libgphoto2 | [] [] | 8 + libgphoto2_port | [] [] [] [] | 14 + libgsasl | [] [] [] | 13 + libiconv | [] [] [] [] | 21 + libidn | () [] [] | 11 + lifelines | [] | 4 + liferea | [] [] [] | 21 + lilypond | [] | 7 + linkdr | [] [] [] [] [] | 17 + lordsawar | | 1 + lprng | [] | 3 + lynx | [] [] [] [] | 17 + m4 | [] [] [] [] | 19 + mailfromd | [] [] | 3 + mailutils | [] | 5 + make | [] [] [] [] | 21 + man-db | [] [] [] | 8 + man-db-manpages | | 4 + minicom | [] [] | 16 + mkisofs | [] [] | 9 + myserver | | 0 + nano | [] [] [] [] | 21 + opcodes | [] [] [] | 11 + parted | [] [] [] [] [] | 15 + pies | [] [] | 3 + popt | [] [] [] [] [] [] | 27 + psmisc | [] [] | 11 + pspp | | 4 + pwdutils | [] [] | 6 + radius | [] [] | 9 + recode | [] [] [] [] | 28 + rosegarden | () | 0 + rpm | [] [] [] | 11 + rush | [] [] | 4 + sarg | | 1 + screem | [] | 3 + scrollkeeper | [] [] [] [] [] | 27 + sed | [] [] [] [] [] | 30 + sharutils | [] [] [] [] [] | 22 + shishi | [] | 3 + skencil | [] [] | 7 + solfege | [] [] [] [] | 16 + solfege-manual | [] | 8 + soundtracker | [] [] [] | 9 + sp | [] | 3 + sysstat | [] [] | 15 + tar | [] [] [] [] [] [] | 23 + texinfo | [] [] [] [] [] | 17 + tin | | 4 + unicode-han-tra... | | 0 + unicode-transla... | | 2 + util-linux-ng | [] [] [] [] | 20 + vice | () () | 1 + vmm | [] | 4 + vorbis-tools | [] | 6 + wastesedge | | 2 + wdiff | [] [] | 7 + wget | [] [] [] [] [] | 26 + wyslij-po | [] [] | 8 + xchat | [] [] [] [] [] [] | 36 + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | 63 + xkeyboard-config | [] [] [] | 22 + +---------------------------------------------------+ + 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW + 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41 2618 + + Some counters in the preceding matrix are higher than the number of +visible blocks let us expect. This is because a few extra PO files are +used for implementing regional variants of languages, or language +dialects. + + For a PO file in the matrix above to be effective, the package to +which it applies should also have been internationalized and +distributed as such by its maintainer. There might be an observable +lag between the mere existence a PO file and its wide availability in a +distribution. + + If June 2010 seems to be old, you may fetch a more recent copy of +this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date +matrix with full percentage details can be found at +`http://translationproject.org/extra/matrix.html'. + +1.5 Using `gettext' in new packages +=================================== + +If you are writing a freely available program and want to +internationalize it you are welcome to use GNU `gettext' in your +package. Of course you have to respect the GNU Library General Public +License which covers the use of the GNU `gettext' library. This means +in particular that even non-free programs can use `libintl' as a shared +library, whereas only free software can use `libintl' as a static +library or use modified versions of `libintl'. + + Once the sources are changed appropriately and the setup can handle +the use of `gettext' the only thing missing are the translations. The +Free Translation Project is also available for packages which are not +developed inside the GNU project. Therefore the information given above +applies also for every other Free Software Project. Contact +`coordinator@translationproject.org' to make the `.pot' files available +to the translation teams. + diff --git a/AUTHORS b/AUTHORS new file mode 100644 index 0000000..6c0428e --- /dev/null +++ b/AUTHORS @@ -0,0 +1 @@ +Toni Gundogdu diff --git a/COPYING b/COPYING new file mode 100644 index 0000000..dba13ed --- /dev/null +++ b/COPYING @@ -0,0 +1,661 @@ + GNU AFFERO GENERAL PUBLIC LICENSE + Version 3, 19 November 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU Affero General Public License is a free, copyleft license for +software and other kinds of works, specifically designed to ensure +cooperation with the community in the case of network server software. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +our General Public Licenses are intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + Developers that use our General Public Licenses protect your rights +with two steps: (1) assert copyright on the software, and (2) offer +you this License which gives you legal permission to copy, distribute +and/or modify the software. + + A secondary benefit of defending all users' freedom is that +improvements made in alternate versions of the program, if they +receive widespread use, become available for other developers to +incorporate. Many developers of free software are heartened and +encouraged by the resulting cooperation. However, in the case of +software used on network servers, this result may fail to come about. +The GNU General Public License permits making a modified version and +letting the public access it on a server without ever releasing its +source code to the public. + + The GNU Affero General Public License is designed specifically to +ensure that, in such cases, the modified source code becomes available +to the community. It requires the operator of a network server to +provide the source code of the modified version running there to the +users of that server. Therefore, public use of a modified version, on +a publicly accessible server, gives the public access to the source +code of the modified version. + + An older license, called the Affero General Public License and +published by Affero, was designed to accomplish similar goals. This is +a different license, not a version of the Affero GPL, but Affero has +released a new version of the Affero GPL which permits relicensing under +this license. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU Affero General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Remote Network Interaction; Use with the GNU General Public License. + + Notwithstanding any other provision of this License, if you modify the +Program, your modified version must prominently offer all users +interacting with it remotely through a computer network (if your version +supports such interaction) an opportunity to receive the Corresponding +Source of your version by providing access to the Corresponding Source +from a network server at no charge, through some standard or customary +means of facilitating copying of software. This Corresponding Source +shall include the Corresponding Source for any work covered by version 3 +of the GNU General Public License that is incorporated pursuant to the +following paragraph. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the work with which it is combined will remain governed by version +3 of the GNU General Public License. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU Affero General Public License from time to time. Such new versions +will be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU Affero General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU Affero General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU Affero General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU Affero General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU Affero General Public License for more details. + + You should have received a copy of the GNU Affero General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If your software can interact with users remotely through a computer +network, you should also make sure that it provides a way for users to +get its source. For example, if your program is a web application, its +interface could display a "Source" link that leads users to an archive +of the code. There are many ways you could offer source, and different +solutions will be better for different programs; see section 13 for the +specific requirements. + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU AGPL, see +. diff --git a/ChangeLog b/ChangeLog new file mode 100644 index 0000000..2a8a555 --- /dev/null +++ b/ChangeLog @@ -0,0 +1,9006 @@ +commit 47c744f +Author: Toni Gundogdu +Date: 2013-11-10 + + Update NEWS for v0.9.4 + + Signed-off-by: Toni Gundogdu + +NEWS + +commit 1522663 +Author: Toni Gundogdu +Date: 2013-10-24 + + DOC: Make doxygen ignore `scripts_version_s' + + This fixes the "warning: Compound scripts_version_s is not documented." + while running doxygen. + + Signed-off-by: Toni Gundogdu + +src/api/version.c + +commit b79b467 +Author: Toni Gundogdu +Date: 2013-10-24 + + API: Return URLs in escaped (percent-encoded) form + + - Extend `l_chk_s' and `l_chk_assign_s' functions to allow the caller + set the `escape_url' arg to TRUE to tell the library to store the + string value in URI escaped form + + - All URLs returned by the library (e.g. media stream or thumbnail) are + now stored in their escaped form, and passed as such to the + applications querying them + + - "Reserved chars" remain unescaped + - https://tools.ietf.org/html/rfc3986#section-2.2 + + Affected API functions + + - quvi_subtitle_lang_get (QUVI_SUBTITLE_LANG_PROPERTY_URL) + - quvi_playlist_get (QUVI_PLAYLIST_*_URL) + - quvi_media_get (QUVI_MEDIA_*_URL) + + Rationale + + - Address the potential problem of chars getting mangled when the URLs + containing UTF8 chars are passed to the application trying to access + the URL + + Signed-off-by: Toni Gundogdu + +src/api/media_get.c +src/api/playlist_get.c +src/api/subtitle_lang_get.c +src/lua/chk.c +src/lua/chk.h +src/lua/exec_media_script_parse.c +src/lua/exec_playlist_script_parse.c +src/lua/exec_subtitle_export_script_export.c +src/lua/exec_subtitle_export_script_ident.c +src/lua/exec_subtitle_script_parse.c + +commit 8e23664 +Author: Toni Gundogdu +Date: 2013-10-24 + + m_url_unescaped_form: Check if g_uri_unescape_string fails + + Signed-off-by: Toni Gundogdu + +src/misc/url.c + +commit 8f43c14 +Merge: 0c68568 6a9ee69 +Author: Toni Gundogdu +Date: 2013-10-15 + + Merge branch 'tg/next__redo_url_{un}escaping' into next + +commit 6a9ee69 +Author: Toni Gundogdu +Date: 2013-10-14 + + tests/media.c: Add test_media_escaped_utf8_url + + Signed-off-by: Toni Gundogdu + +tests/media.c + +commit 0246e60 +Author: Toni Gundogdu +Date: 2013-10-14 + + test_media_escaped_url: Replace URL + + Signed-off-by: Toni Gundogdu + +tests/media.c + +commit 95d221b +Author: Toni Gundogdu +Date: 2013-10-14 + + test_media_select: Replace URL, update patterns + + Signed-off-by: Toni Gundogdu + +tests/media.c + +commit d7e5c54 +Author: Toni Gundogdu +Date: 2013-10-14 + + test_media_multi: Replace test URL + + Other: + * Check {video,audio} encoding properties conditionally + + Signed-off-by: Toni Gundogdu + +tests/media.c + +commit fa705e3 +Author: Toni Gundogdu +Date: 2013-10-14 + + test_scan_core: Replace test URL + + Signed-off-by: Toni Gundogdu + +tests/scan.c + +commit 5b02675 +Author: Toni Gundogdu +Date: 2013-10-14 + + n_new, n_resolve_new: Escape URL for libcurl + + Escape the URLs at these chokepoints before they are passed to libcurl + (via CURLOPT_URL). libcurl works with UTF8 chars as long as they have + been escaped. + + Signed-off-by: Toni Gundogdu + +src/net/handle.c + +commit 3b2a19d +Author: Toni Gundogdu +Date: 2013-10-14 + + m_subtitle_new: Store input URL in unescaped form + + Signed-off-by: Toni Gundogdu + +src/misc/subtitle.c + +commit c312f9a +Author: Toni Gundogdu +Date: 2013-10-14 + + m_playlist_new: Store input URL in unescaped form + + Signed-off-by: Toni Gundogdu + +src/misc/playlist.c + +commit 3e5cb7d +Author: Toni Gundogdu +Date: 2013-10-14 + + m_media_new: Store input URL in unescaped form + + Signed-off-by: Toni Gundogdu + +src/misc/media.c + +commit 4a626ab +Author: Toni Gundogdu +Date: 2013-10-14 + + Add misc/url.* with m_url_(un)escaped_form + + Signed-off-by: Toni Gundogdu + +src/misc/Makefile.am +src/misc/url.c +src/misc/url.h + +commit 741d967 +Author: Toni Gundogdu +Date: 2013-10-14 + + m_unescape_url: Remove completely + + This function will be replaced by m_url_(un)escaped_form. + + Signed-off-by: Toni Gundogdu + +src/misc/Makefile.am +src/misc/media.c +src/misc/playlist.c +src/misc/subtitle.c +src/misc/unescape.c +src/misc/unescape.h + +commit 0c68568 +Author: Toni Gundogdu +Date: 2013-10-13 + + DOC: Update C API reference URL + + Signed-off-by: Toni Gundogdu + +doc/footer.txt + +commit c0a4fec +Author: Toni Gundogdu +Date: 2013-09-03 + + Update NEWS for v0.9.3 + + Signed-off-by: Toni Gundogdu + +NEWS + +commit dd1456d +Author: Toni Gundogdu +Date: 2013-09-03 + + Use word "library" in the source file headers + + Signed-off-by: Toni Gundogdu + +src/_quvi_file_ext_s.h +src/api/errcode.c +src/api/file_ext_free.c +src/api/file_ext_get.c +src/api/file_ext_new.c +src/curl/reset.c +src/gcrypt/crypto.c +src/gcrypt/crypto.h +src/gcrypt/init.c +src/lua/quvi/base64/decode.c +src/lua/quvi/base64/encode.c +src/lua/quvi/crypto/copts.c +src/lua/quvi/crypto/en_decrypt.c +src/lua/quvi/crypto/err.c +src/lua/quvi/crypto/err.h +src/lua/quvi/crypto/hash.c +src/lua/quvi/crypto/opts.h +src/lua/quvi/http/cookie.c +src/lua/quvi/http/header.c +src/lua/quvi/http/metainfo.c +src/lua/quvi/opts.c +src/lua/quvi/opts.h +src/misc/slst.c +src/misc/slst.h + +commit 0ab60a7 +Author: Toni Gundogdu +Date: 2013-09-03 + + tests_media_escaped_url: Change test URL + + Signed-off-by: Toni Gundogdu + +tests/media.c + +commit f2ce9b7 +Author: Toni Gundogdu +Date: 2013-09-03 + + FIX: Unescape input URL before URL resolving + + Unescape the input URL in m_{media,subtitle,playlist}_new, otherwise + libcurl will attempt to resolve escaped (if any) URLs and fail. + + Signed-off-by: Toni Gundogdu + +src/misc/match_media_script.c +src/misc/match_playlist_script.c +src/misc/match_subtitle_script.c +src/misc/media.c +src/misc/playlist.c +src/misc/subtitle.c + +commit 484637c +Author: Toni Gundogdu +Date: 2013-09-03 + + quvi_resolve_new: Update to use the added m_resolve_url + + Signed-off-by: Toni Gundogdu + +src/api/resolve_new.c + +commit 876107e +Author: Toni Gundogdu +Date: 2013-09-03 + + Rewrite m_resolve, add m_resolve_url + + Modify m_resolve to reuse the GString: + * Read input URL from it + * Write resolved destination URL to it + + Add m_resolve_url: + * Identical to the old m_resolve which took the input URL parameter + + Signed-off-by: Toni Gundogdu + +src/misc/resolve.c +src/misc/resolve.h + +commit 12c1faa +Author: Toni Gundogdu +Date: 2013-09-03 + + Remove a vim modeline line + + Signed-off-by: Toni Gundogdu + +src/misc/match_subtitle_export_script.c + +commit c2a7ade +Author: Toni Gundogdu +Date: 2013-09-03 + + tests: media: Replace dmotion URLs + + Update any tests that previously used dailymotion test URLs to use + spiegel test URLs. The updated tests previously relied on the order of + the returned stream IDs -- this no longer is possible with spiegel. This + commit changes the tests so that they use hardcoded expected values, + instead. + + Signed-off-by: Toni Gundogdu + +tests/media.c + +commit 61cc7f7 +Author: Toni Gundogdu +Date: 2013-08-31 + + DOC: manpage: footer: Revise "FURTHER RESOURCES" + + Signed-off-by: Toni Gundogdu + +doc/footer.txt + +commit e8605c8 +Merge: 353f0d7 ed10f8e +Author: Toni Gundogdu +Date: 2013-08-31 + + Merge branch 'tg/next__opt-in_allow_cookies' into next + +commit ed10f8e +Author: Toni Gundogdu +Date: 2013-08-31 + + examples/media: Add -c (enable cookies) + + Signed-off-by: Toni Gundogdu + +examples/media.c + +commit a9ad57c +Author: Toni Gundogdu +Date: 2013-08-31 + + libconvenience_example: Add examples_enable_cookies + + Signed-off-by: Toni Gundogdu + +examples/lib/Makefile.am +examples/lib/enable_cookies.c +examples/lib/examples.h + +commit 5c9a1dd +Author: Toni Gundogdu +Date: 2013-08-31 + + DOC: quvi-object(7): Update quvi.http.cookie with QUVI_OPTION_ALLOW_COOKIES + + Signed-off-by: Toni Gundogdu + +doc/man7/quvi-object.7.txt + +commit c20a66c +Author: Toni Gundogdu +Date: 2013-08-31 + + DOC: Glossary: Terminology: Update with CURLOPT_COOKIEFILE="" + + Signed-off-by: Toni Gundogdu + +src/api/doxy/glossary_termino.dp + +commit 876949e +Author: Toni Gundogdu +Date: 2013-08-31 + + quvi.http.cookie: Return unless QUVI_OPTION_ALLOW_COOKIES is QUVI_TRUE + + Signed-off-by: Toni Gundogdu + +src/lua/quvi/http/cookie.c + +commit a6f1c10 +Author: Toni Gundogdu +Date: 2013-08-31 + + c_reset: Set CURLOPT_COOKIELIST="ALL" conditionally + + Clear the cookies in the (libcurl) memory, only if + QUVI_OPTION_ALLOW_COOKIES was set to QUVI_TRUE. + + Signed-off-by: Toni Gundogdu + +src/curl/reset.c + +commit 6dae749 +Author: Toni Gundogdu +Date: 2013-08-31 + + c_init: Set CURLOPT_COOKIEFILE="" conditionally + + Enable cookie support only if QUVI_OPTION_ALLOW_COOKIE was set to + QUVI_TRUE. + + The earlier libquvi 0.9 versions presumed, incorrectly, that setting + CURLOPT_COOKIELIST="ALL" would cause libcurl to parse the received + cookies and use them in the subsequent HTTP requests. Setting + CURLOPT_COOKIEFILE="" fixes that. + + Signed-off-by: Toni Gundogdu + +src/curl/init.c + +commit f158aa9 +Author: Toni Gundogdu +Date: 2013-08-31 + + API: quvi_set: Handle QUVI_OPTION_ALLOW_COOKIES + + Signed-off-by: Toni Gundogdu + +src/api/set.c + +commit f56798b +Author: Toni Gundogdu +Date: 2013-08-31 + + API: Add QUVI_OPTION_ALLOW_COOKIES + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qoption.h + +commit 280566c +Author: Toni Gundogdu +Date: 2013-08-31 + + _quvi_s: Add "allow_cookies" flag + + Signed-off-by: Toni Gundogdu + +src/_quvi_s.h + +commit 353f0d7 +Merge: c591b1b 6a68b8e +Author: Toni Gundogdu +Date: 2013-08-31 + + Merge branch 'tg/next__scripts_version_as_ini' into next + +commit 6a68b8e +Author: Toni Gundogdu +Date: 2013-08-29 + + examples: version: Print QUVI_VERSION_SCRIPTS_CONFIGURATION + + Signed-off-by: Toni Gundogdu + +examples/version.c + +commit 4466c98 +Author: Toni Gundogdu +Date: 2013-08-29 + + API: quvi_version: Read "version" file as ini-file + + libquvi-scripts now writes the "version" file as a ini-file. Update + quvi_version to parse the contents using GKeyFile. + + Other: + * Add support for QUVI_VERSION_SCRIPTS_CONFIGURATION + + Signed-off-by: Toni Gundogdu + +src/api/version.c + +commit f0c95e0 +Author: Toni Gundogdu +Date: 2013-08-29 + + API: Add QUVI_VERSION_SCRIPTS_CONFIGURATION + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qversion.h + +commit 097d13a +Author: Toni Gundogdu +Date: 2013-08-29 + + configure.ac: scriptsver: Change how version is parsed + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit c591b1b +Author: Toni Gundogdu +Date: 2013-08-26 + + AC_PREREQ: Bump to 2.69 + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit f02cc3a +Author: Toni Gundogdu +Date: 2013-08-06 + + FIX: error: implicit declaration of function 'luaL_register' + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit 015d7f8 +Author: Toni Gundogdu +Date: 2013-07-16 + + Updates NEWS for v0.9.2 + + Signed-off-by: Toni Gundogdu + +NEWS + +commit 20b1ee3 +Author: Toni Gundogdu +Date: 2013-07-07 + + LDFLAGS: libtool: Use -release with unstable 0.9 releases + + The rationale behind the switch (`-version-info' to `-release'): + + * The 0.9 series is currently under development, and will gradually + mature as the next stable (1.0), replacing the 0.4 series completely + + * The series may still see: + - ABI and API breakages with the earlier 0.9 versions + - Feature additions and/or removals + + Instead of bumping the `-version-info C+1:R:A' everytime something + breaks the backward-compatibility with the earlier 0.9 releases, we will + use the `-release RELEASE'. Once 0.9 graduates as the next stable (1.0), + we can switch back to using the `-version-info'. + + Downside: + + * Every release of the package will not be binary compatible with any + other release (which would frequently be the case anyway) + + * Applications that depend on (this) libquvi 0.9 release will have to + be recompiled later again to use a new release of libquvi + + Other: + * Leave the -version-info line commented out for the next stable (1.0) + + Signed-off-by: Toni Gundogdu + +src/Makefile.am + +commit cfc17fd +Author: Toni Gundogdu +Date: 2013-07-03 + + FIX: configure.ac: AS_IF for date(1) + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit 6612228 +Author: Toni Gundogdu +Date: 2013-07-03 + + configure.ac: Rewrite 6cdebfdf4 using $srcdir and AS_IF + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit 68a48e2 +Merge: 1004836 7a5fa40 +Author: Toni Gundogdu +Date: 2013-07-03 + + Merge branch 'tg/next__quvi_version__build_cflags' into next + +commit 7a5fa40 +Author: Toni Gundogdu +Date: 2013-07-03 + + examples/version: Print QUVI_VERSION_BUILD_CC_CFLAGS + + Signed-off-by: Toni Gundogdu + +examples/version.c + +commit c93ce12 +Author: Toni Gundogdu +Date: 2013-07-03 + + quvi_version: Add support for QUVI_VERSION_BUILD_CC_CFLAGS + + Save, and return, $CC and $CFLAGS via quvi_version with + QUVI_VERSION_BUILD_CC_CFLAGS. + + Signed-off-by: Toni Gundogdu + +configure.ac +src/api/version.c +src/quvi-0.9/quvi/qversion.h + +commit 1004836 +Author: Toni Gundogdu +Date: 2013-06-25 + + configure.ac: Add a vim modeline + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit 6cdebfd +Author: Bastien Nocera +Date: 2013-06-21 + + Require a2x when building from git + + Otherwise make in the doc/man7 directory will fail as quvi-object.7 is + missing. + + Signed-off-by: Bastien Nocera + Signed-off-by: Toni Gundogdu + +configure.ac + +commit 91375fd +Author: Bastien Nocera +Date: 2013-06-20 + + FIX: declaration of quvi_new() + + qfunc.h:28:3: warning: function declaration isn't a prototype + + w/ [-Wstrict-prototypes] + + Signed-off-by: Bastien Nocera + +src/quvi-0.9/quvi/qfunc.h + +commit 1e82245 +Author: Toni Gundogdu +Date: 2013-06-25 + + tests: quvi: Sprinkle with quvi_ok calls + + To confirm that `quvi_ok' functions as expected. + + Signed-off-by: Toni Gundogdu + +tests/quvi.c + +commit 905a544 +Author: Toni Gundogdu +Date: 2013-06-25 + + Remove unused net/def.h + + Signed-off-by: Toni Gundogdu + +src/curl/fetch.c +src/curl/http_metainfo.c +src/net/Makefile.am +src/net/def.h +src/net/fetch.c + +commit 3816c41 +Merge: 78e1589 a90e659 +Author: Toni Gundogdu +Date: 2013-06-25 + + Merge branch 'tg/next__statuscb_with_userdata' into next + +commit a90e659 +Author: Toni Gundogdu +Date: 2013-06-25 + + examples: examples_status: Add user_data parameter + + Other: + * Rename parameters + + Signed-off-by: Toni Gundogdu + +examples/lib/examples.h +examples/lib/status.c + +commit a3cfa20 +Author: Toni Gundogdu +Date: 2013-06-25 + + tests: Add test_scan_userdata + + This testcase will serve as a userdata-with-status-callback -test. It + could have been any other network-dependent unit of the testsuite. + + Signed-off-by: Toni Gundogdu + +tests/scan.c + +commit bc80328 +Author: Toni Gundogdu +Date: 2013-06-25 + + libconvenience_net: Pass userdata with status callback + + Signed-off-by: Toni Gundogdu + +src/net/fetch.c +src/net/http_metainfo.c +src/net/resolve.c + +commit 07f7387 +Author: Toni Gundogdu +Date: 2013-06-25 + + Define QUVI_OPTION_CALLBACK_STATUS_USERDATA + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qoption.h + +commit 5b3cebb +Author: Toni Gundogdu +Date: 2013-06-25 + + Redefine quvi_callback_status with userdata parameter + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qdef.h + +commit 587958b +Author: Toni Gundogdu +Date: 2013-06-25 + + quvi_set: Add support for QUVI_OPTION_CALLBACK_STATUS_USERDATA + + Signed-off-by: Toni Gundogdu + +src/api/set.c + +commit ffcd072 +Author: Toni Gundogdu +Date: 2013-06-25 + + _quvi_s: Add userdata property for "status" callback + + Signed-off-by: Toni Gundogdu + +src/_quvi_s.h + +commit 78e1589 +Merge: e6b1b0e 0ddda1b +Author: Toni Gundogdu +Date: 2013-06-25 + + Merge branch 'tg/next__add__quvi_errcode' into next + +commit 0ddda1b +Author: Toni Gundogdu +Date: 2013-06-25 + + examples: supports: chk_support: Update to use quvi_errcode + + Signed-off-by: Toni Gundogdu + +examples/supports.c + +commit 4b110f3 +Author: Toni Gundogdu +Date: 2013-06-25 + + examples: examples_exit_if_error: Use quvi_errcode + + Signed-off-by: Toni Gundogdu + +examples/lib/exit_if_error.c + +commit 82b9519 +Author: Toni Gundogdu +Date: 2013-06-25 + + tests: Use quvi_errcode instead of QUVI_INFO_ERROR_CODE + + Signed-off-by: Toni Gundogdu + +tests/goto.c +tests/http_metainfo.c +tests/media.c +tests/playlist.c +tests/quvi.c +tests/resolve.c +tests/scan.c +tests/script.c +tests/subtitle.c +tests/supports.c + +commit 2970b50 +Author: Toni Gundogdu +Date: 2013-06-25 + + tests: libconvenience_test: Remove qerr function + + Signed-off-by: Toni Gundogdu + +tests/lib/qerr.c +tests/lib/tests.h + +commit 5f98b90 +Author: Toni Gundogdu +Date: 2013-06-25 + + API: quvi_get: Remove QUVI_INFO_ERROR_CODE support + + Set the q->status.rc which was previously removed in aa7772f0f8, making + the `quvi_get' secure to use again. The API now provides the + `quvi_errcode' to query the last library error code. + + See also: + * e508f1ba3f + + Other: + * Remove the _CURRENTLY_UNUSED blocks + + Signed-off-by: Toni Gundogdu + +src/api/get.c +src/quvi-0.9/quvi/qinfo.h + +commit c9d1ca1 +Author: Toni Gundogdu +Date: 2013-06-25 + + API: Add quvi_errcode + + Signed-off-by: Toni Gundogdu + +src/api/Makefile.am +src/api/errcode.c +src/quvi-0.9/quvi/qfunc.h + +commit e6b1b0e +Author: Toni Gundogdu +Date: 2013-06-25 + + _set: QUVI_OPTION_USER_AGENT: Use gchar instead of char + + Signed-off-by: Toni Gundogdu + +src/api/set.c + +commit 92b4c17 +Author: Toni Gundogdu +Date: 2013-06-25 + + _media_get: Make const QuviMediaProperty param + + Signed-off-by: Toni Gundogdu + +src/api/media_get.c + +commit c7cbc17 +Author: Toni Gundogdu +Date: 2013-06-25 + + test_playlist_core: Update expected title values + + Signed-off-by: Toni Gundogdu + +tests/playlist.c + +commit f63721a +Author: Toni Gundogdu +Date: 2013-06-25 + + test_goto_url: Use another URL + + Signed-off-by: Toni Gundogdu + +tests/goto.c + +commit 080f9f8 +Author: Toni Gundogdu +Date: 2013-06-04 + + tests: Do not invoke gtester-report + + This results in: + + Traceback (most recent call last): + File "/usr/bin/gtester-report", line 492, in + main() + File "/usr/bin/gtester-report", line 486, in main + HTMLReportWriter(rr.get_info(), rr.binary_list()).printout() + File "/usr/bin/gtester-report", line 350, in printout + self.handle_info () + File "/usr/bin/gtester-report", line 244, in handle_info + self.oprint ('

Package: %(package)s, version: \ + %(version)s

\n' % self.info) + KeyError: 'package' + + $ python --version + Python 2.7.3 + $ gtester -v + gtester version 2.32.4 + $ gtester-report -v + gtester-report (GLib utils) version 0.0-uninstalled. + + See also: + * https://bugzilla.gnome.org/show_bug.cgi?id=668035 + + Signed-off-by: Toni Gundogdu + +tests/Makefile.am + +commit fa35e81 +Author: Toni Gundogdu +Date: 2013-06-04 + + README: Add liblua 5.1 note for Debian Wheezy + + Signed-off-by: Toni Gundogdu + +README + +commit bedd9af +Author: Toni Gundogdu +Date: 2013-05-20 + + Update NEWS for v0.9.1 + + Signed-off-by: Toni Gundogdu + +NEWS + +commit 3e9bd70 +Author: Toni Gundogdu +Date: 2013-05-20 + + README: Requirements: Add aptitude commands + +README + +commit 8bf02f2 +Author: Toni Gundogdu +Date: 2013-05-19 + + gen-news.sh: Do not print release author + + Trivial information. Release date matters. + + Signed-off-by: Toni Gundogdu + +gen-news.sh + +commit eef806a +Merge: 5cf0f46 7384203 +Author: Toni Gundogdu +Date: 2013-05-19 + + Merge branch 'tg/next__fix_tests' into next + +commit 7384203 +Author: Toni Gundogdu +Date: 2013-05-19 + + tests: test_resolve_nodst: Update URL + + The previous URL now redirects to a new location. + + Signed-off-by: Toni Gundogdu + +tests/resolve.c + +commit 732c516 +Author: Toni Gundogdu +Date: 2013-05-19 + + tests: Comment out test_resolve_3 + + The URL has been disabled by the shortening service. + + Signed-off-by: Toni Gundogdu + +tests/resolve.c + +commit a133f26 +Author: Toni Gundogdu +Date: 2013-05-19 + + tests: playlist: Update URLs + + * youtube: Use an actual playlist URL + * soundcloud: Use a new URL + + Signed-off-by: Toni Gundogdu + +tests/playlist.c + +commit 5cf0f46 +Author: Toni Gundogdu +Date: 2013-05-13 + + misc/scan_scripts.c: Make show_dir a static variable + + Signed-off-by: Toni Gundogdu + +src/misc/scan_scripts.c + +commit 1bcff92 +Author: Toni Gundogdu +Date: 2013-05-13 + + misc/scan_scripts.c: Make scripts_dir a static variable + + Signed-off-by: Toni Gundogdu + +src/misc/scan_scripts.c + +commit 5d5fc70 +Merge: 98b24df d5d320c +Author: Toni Gundogdu +Date: 2013-05-13 + + Merge branch 'tg/next__extend_LIBQUVI_SCRIPTS_DIR' into next + +commit d5d320c +Author: Toni Gundogdu +Date: 2013-05-13 + + DOC: Add LIBQUVI_EXCLUSIVE_SCRIPTS_DIR + + Signed-off-by: Toni Gundogdu + +doc/man3/libquvi.3.txt +src/api/doxy/env.dp + +commit 93eee9d +Author: Toni Gundogdu +Date: 2013-05-13 + + Add support for LIBQUVI_EXCLUSIVE_SCRIPTS_DIR + + See the libquvi.3.txt for the full description. + + Signed-off-by: Toni Gundogdu + +src/misc/scan_scripts.c + +commit 98b24df +Author: Toni Gundogdu +Date: 2013-05-13 + + Remove "excl." from the comment + + As this is a remnant of 0.4 and would suggest that LIBQUVI_SCRIPTS_DIR + value would be used "exclusively", e.g. if set, then only those paths + would be checked for the scripts. + + Signed-off-by: Toni Gundogdu + +src/misc/scan_scripts.c + +commit 204d594 +Author: Toni Gundogdu +Date: 2013-05-13 + + test_scan_short: Update test URL + + Signed-off-by: Toni Gundogdu + +tests/scan.c + +commit 154a9ed +Author: Toni Gundogdu +Date: 2013-05-09 + + FIX: DOC: LIBQUVI_SCRIPTS_VERBOSE env. variable name + + LIBQUVI_VERBOSE_SCRIPTS is an an invalid name of the variable. The + quvi/debug module checks for LIBQUVI_SCRIPTS_VERBOSE. + + Signed-off-by: Toni Gundogdu + +src/api/doxy/env.dp + +commit 76e0ede +Author: Toni Gundogdu +Date: 2013-05-08 + + FIX: DOC: Remove LIBQUVI_VERBOSE_SCRIPTS + + LIBQUVI_VERBOSE_SCRIPTS is an an invalid name of the variable. The + 'quvi/debug' module checks for LIBQUVI_SCRIPTS_VERBOSE. + + Signed-off-by: Toni Gundogdu + +doc/man3/libquvi.3.txt + +commit 24327c3 +Author: Toni Gundogdu +Date: 2013-04-16 + + gen-news.sh: Do not print commits with >1 one parent + + Signed-off-by: Toni Gundogdu + +gen-news.sh + +commit 1ebe33e +Merge: acff53e a588ad9 +Author: Toni Gundogdu +Date: 2013-04-14 + + Merge branch 'tg/next/1.0' into next + + Conflicts: + configure.ac + +commit a588ad9 +Author: Toni Gundogdu +Date: 2013-04-07 + + FIX: 'copt' is used uninitialized whenever switch default is taken + + Signed-off-by: Toni Gundogdu + +src/lua/quvi/http/cookie.c + +commit d98782b +Author: Toni Gundogdu +Date: 2013-03-28 + + FIX: quvi_subtitle_select: If lang count is zero + + _default: + If the support script failed to return any subtitles for the media, + then return NULL. + + Signed-off-by: Toni Gundogdu + +src/api/subtitle_select.c + +commit 6cfe046 +Merge: aaf8169 f741f55 +Author: Toni Gundogdu +Date: 2013-03-25 + + Merge branch 'tg/next/1.0__asciidoc.conf' into tg/next/1.0 + +commit f741f55 +Author: Toni Gundogdu +Date: 2013-03-25 + + man7: quvi-object.7.txt: Revise for asciidoc.conf + + * Use linkman macro from asciidoc.conf + * Include footer.txt + + Signed-off-by: Toni Gundogdu + +doc/man7/quvi-object.7.txt + +commit 7ab7243 +Author: Toni Gundogdu +Date: 2013-03-25 + + man7: Makefile.am: Use ASCIIDOC_OPTS with a2x + + Signed-off-by: Toni Gundogdu + +doc/man7/Makefile.am + +commit bcfc2f6 +Author: Toni Gundogdu +Date: 2013-03-25 + + man3: libquvi.3.txt: Revise for asciidoc.conf + + * Use linkman macro from asciidoc.conf + * Include footer.txt + + Signed-off-by: Toni Gundogdu + +doc/man3/libquvi.3.txt + +commit b882abc +Author: Toni Gundogdu +Date: 2013-03-25 + + man3: Makefile.am: Use ASCIIDOC_OPTS with a2x + + Signed-off-by: Toni Gundogdu + +doc/man3/Makefile.am + +commit be904eb +Author: Toni Gundogdu +Date: 2013-03-25 + + doc: Add footer.txt + + The manpages include the contents of this file. + + Signed-off-by: Toni Gundogdu + +doc/Makefile.am +doc/footer.txt + +commit cdeb13a +Author: Toni Gundogdu +Date: 2013-03-25 + + doc: Add asciidoc.conf + + This file adds the linkman macro. See the comment field for the + instructions. This is a modified version from the pacman (of Arch Linux) + source tree uses to produce the manpages: this macro does not insert + . + + Signed-off-by: Toni Gundogdu + +doc/Makefile.am +doc/asciidoc.conf + +commit aaf8169 +Author: Toni Gundogdu +Date: 2013-03-24 + + AC_CHECK_HEADERS: Add locale.h + +configure.ac + +commit c5d0f3d +Author: Toni Gundogdu +Date: 2013-03-24 + + AC_CHECK_FUNCS: Add memset, setlocale + +configure.ac + +commit eac504a +Author: Toni Gundogdu +Date: 2013-03-24 + + AM_INIT_AUTOMAKE: Remove -Werror + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit ca0a32c +Author: Toni Gundogdu +Date: 2013-03-24 + + Workaround: AM_PROG_AR + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit 6b61fdb +Author: Toni Gundogdu +Date: 2013-03-24 + + Makefile.am: doc: Add missing man7 path + + Signed-off-by: Toni Gundogdu + +Makefile.am + +commit f0ea201 +Merge: 51a41b7 4abc95d +Author: Toni Gundogdu +Date: 2013-03-16 + + Merge branch 'tg/next/1.0__quvi_set_ua' into tg/next/1.0 + +commit 4abc95d +Author: Toni Gundogdu +Date: 2013-03-16 + + c_reset: Use either default or QUVI_OPTION_USER_AGENT value + + Signed-off-by: Toni Gundogdu + +src/curl/reset.c + +commit 66ba8b4 +Author: Toni Gundogdu +Date: 2013-03-16 + + quvi_set: Implement QUVI_OPTION_USER_AGENT + + In order to keep the program set UA value around, store it for later + use, as c_reset would otherwise reset to the library default value + ("Mozilla/5.0"). + + Signed-off-by: Toni Gundogdu + +src/api/set.c + +commit 5836c49 +Author: Toni Gundogdu +Date: 2013-03-16 + + QuviOption: Add QUVI_OPTION_USER_AGENT + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qoption.h + +commit a3a41c2 +Author: Toni Gundogdu +Date: 2013-03-16 + + _quvi_s: Add user_agent + + Signed-off-by: Toni Gundogdu + +src/_quvi_s.h +src/api/free.c +src/api/new.c + +commit acff53e +Author: Toni Gundogdu +Date: 2013-03-08 + + .gitignore: Add config.aux/compile + + Signed-off-by: Toni Gundogdu + +.gitignore + +commit c9d2eb4 +Author: Martin Herkt +Date: 2013-03-08 + + configure.ac: add missing AM macros + + This fixes generating configure on systems with recent autotools and + GNU binutils. + + Signed-off-by: Martin Herkt + +configure.ac + +commit 51a41b7 +Author: Toni Gundogdu +Date: 2013-03-06 + + test_subtitle_core: Add export tests + + Signed-off-by: Toni Gundogdu + +tests/subtitle.c + +commit 2bf3b83 +Merge: cf776ee 6efeb83 +Author: Toni Gundogdu +Date: 2013-03-06 + + Merge branch 'tg/next/1.0__quvi_file_ext' into tg/next/1.0 + +commit 6efeb83 +Author: Toni Gundogdu +Date: 2013-03-06 + + Add test_file_ext + + Signed-off-by: Toni Gundogdu + +tests/quvi.c + +commit 497eeb7 +Author: Toni Gundogdu +Date: 2013-03-06 + + Add examples/file_ext.c + + Signed-off-by: Toni Gundogdu + +examples/Makefile.am +examples/file_ext.c + +commit 706e999 +Author: Toni Gundogdu +Date: 2013-03-06 + + _http_metainfo: Revise to use updated l_exec_util_to_file_ext + + Signed-off-by: Toni Gundogdu + +src/net/http_metainfo.c + +commit 01f3e98 +Author: Toni Gundogdu +Date: 2013-03-06 + + l_exec_util_to_file_ext: Revise for reusability + + Rewrite l_exec_util_to_file_ext to take a different set of + parameters so that it can be called from quvi_file_ext_new. + + Signed-off-by: Toni Gundogdu + +src/lua/util/exec_util_to_file_ext.c + +commit 6a9104f +Author: Toni Gundogdu +Date: 2013-03-06 + + Add quvi_file_ext_get to API + +src/api/Makefile.am +src/api/file_ext_get.c +src/quvi-0.9/quvi/qfunc.h + +commit a66be54 +Author: Toni Gundogdu +Date: 2013-03-06 + + Add quvi_file_ext_free to API + +src/api/Makefile.am +src/api/file_ext_free.c +src/quvi-0.9/quvi/qfunc.h + +commit e60ead2 +Author: Toni Gundogdu +Date: 2013-03-06 + + Add quvi_file_ext_new to API + +src/api/Makefile.am +src/api/file_ext_new.c +src/quvi-0.9/quvi/qfunc.h + +commit a507e38 +Author: Toni Gundogdu +Date: 2013-03-06 + + Add quvi_file_ext_t type to API + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qdef.h + +commit c30bd7a +Author: Toni Gundogdu +Date: 2013-03-06 + + Add _quvi_file_ext_s + + Signed-off-by: Toni Gundogdu + +src/Makefile.am +src/_quvi_file_ext_s.h + +commit cf776ee +Merge: 8b34e7e 65ba213 +Author: Toni Gundogdu +Date: 2013-03-04 + + Merge branch 'tg/next/1.0__cleanup_cookie_header' into tg/next/1.0 + +commit 65ba213 +Author: Toni Gundogdu +Date: 2013-03-04 + + Pass lua_State arg to l_quvi_object_opts_croak_if_error + + The updated l_quvi_object_opts_croak_if_error takes lua_State as the + first arg. Update the following: + * _exec (quvi/crypto/en_decrypt.c) + * l_quvi_base64_encode + * l_quvi_http_metainfo + * l_quvi_http_resolve + * l_quvi_crypto_hash + * l_quvi_http_header + * l_quvi_http_fetch + + Signed-off-by: Toni Gundogdu + +src/lua/quvi/base64/encode.c +src/lua/quvi/crypto/en_decrypt.c +src/lua/quvi/crypto/hash.c +src/lua/quvi/http/fetch.c +src/lua/quvi/http/header.c +src/lua/quvi/http/metainfo.c +src/lua/quvi/http/resolve.c + +commit 276adb6 +Author: Toni Gundogdu +Date: 2013-03-04 + + n_fetch: Use updated l_quvi_object_opts_is_set + + Signed-off-by: Toni Gundogdu + +src/net/fetch.c + +commit bdc964b +Author: Toni Gundogdu +Date: 2013-03-04 + + quvi/http/cookie.c: Use new support funcs/macros + + Replace use of macros and functions defined in this file with those + added to quvi/opts.c. + + Signed-off-by: Toni Gundogdu + +src/lua/quvi/http/cookie.c + +commit 98efce5 +Author: Toni Gundogdu +Date: 2013-03-04 + + quvi/crypto/copts.c: Use new support funcs/macros + + Replace use of macros and functions defined in this file with those + added to quvi/opts.c. + + Signed-off-by: Toni Gundogdu + +src/lua/quvi/crypto/copts.c + +commit 30b215a +Author: Toni Gundogdu +Date: 2013-03-04 + + quvi-object opts: Additional support funcs/macros + + Add macros: + l_quvi_object_opts_chk_req_{s,cb} + l_quvi_object_opts_chk_opt_s + + Modify `l_quvi_object_opts_is_set' to take additional parameters so that + it can be used by the above macros. + + Add function `l_quvi_object_opts_chk_given' which will check that + the quvi-object options list is not empty. + + Signed-off-by: Toni Gundogdu + +src/lua/quvi/opts.c +src/lua/quvi/opts.h + +commit 8b34e7e +Merge: 46f9db1 579619b +Author: Toni Gundogdu +Date: 2013-03-04 + + Merge branch 'tg/next/1.0__header' into tg/next/1.0 + +commit 579619b +Author: Toni Gundogdu +Date: 2013-03-03 + + quvi-object(7): Remove qoo_http_user_agent + + Signed-off-by: Toni Gundogdu + +doc/man7/quvi-object.7.txt + +commit 63aa9cb +Author: Toni Gundogdu +Date: 2013-03-03 + + Comment out l_quvi_object_opts_curl + + This function currently sets only the CURLOPT_USERAGENT. The scripts may + use the quvi.http.header to set the UA which is more flexible: the + custom headers will be cleared automatically, thus the previously set + CURLOPT_USERAGENT will not be lost, e.g. when a program is reusing the + libquvi curl session handle and sets the CURLOPT_USERAGENT to another + value. + + Signed-off-by: Toni Gundogdu + +src/lua/quvi/http/fetch.c +src/lua/quvi/http/metainfo.c +src/lua/quvi/http/resolve.c +src/lua/quvi/opts.c +src/lua/quvi/opts.h + +commit 1e72770 +Author: Toni Gundogdu +Date: 2013-03-03 + + quvi-object(7): Document quvi.http.header + + Signed-off-by: Toni Gundogdu + +doc/man7/quvi-object.7.txt + +commit 3adeeda +Author: Toni Gundogdu +Date: 2013-03-03 + + Add lua/quvi/http/header.c + + This file implements the l_quvi_http_header function. + + Signed-off-by: Toni Gundogdu + +src/lua/Makefile.am +src/lua/quvi/http/header.c + +commit c72f9cd +Author: Toni Gundogdu +Date: 2013-03-03 + + Add l_quvi_http_header to quvi_reg_meth + + This function will be accessible using the quvi-object, + e.g. quvi.http.header("Cookie: foo=1; bar=2;") + + Signed-off-by: Toni Gundogdu + +src/lua/init.c + +commit 01197b8 +Author: Toni Gundogdu +Date: 2013-03-03 + + Add HTTP "headers" to _quvi_s + + This linked-list will hold any custom HTTP headers that should + be used with the outgoing HTTP requests. + + Signed-off-by: Toni Gundogdu + +src/_quvi_s.h + +commit 2ed9e19 +Author: Toni Gundogdu +Date: 2013-03-03 + + Add c_reset_headers + + Release and clear the custom headers set with CURLOPT_HTTPHEADER. + This restores the internal headers to their initial state. + + c_close calls this function, releasing any previously added custom + headers. + + Signed-off-by: Toni Gundogdu + +src/curl/close.c +src/curl/reset.c + +commit 46f9db1 +Merge: cbd57de e52fbb5 +Author: Toni Gundogdu +Date: 2013-03-04 + + Merge branch 'tg/next/1.0__cookie' into tg/next/1.0 + +commit e52fbb5 +Author: Toni Gundogdu +Date: 2013-02-28 + + quvi-object(7): Document quvi.http.cookie + + Signed-off-by: Toni Gundogdu + +doc/man7/quvi-object.7.txt + +commit 015cfe6 +Author: Toni Gundogdu +Date: 2013-02-28 + + Add lua/quvi/http/cookie.c + + This implements the quvi.http.cookie (l_quvi_http_cookie). + + Signed-off-by: Toni Gundogdu + +src/lua/Makefile.am +src/lua/quvi/http/cookie.c + +commit 5588a45 +Author: Toni Gundogdu +Date: 2013-02-28 + + Add l_quvi_http_cookie to quvi_http_reg_meth + + Signed-off-by: Toni Gundogdu + +src/lua/init.c + +commit 8e3f6a4 +Author: Toni Gundogdu +Date: 2013-02-28 + + Add QUVI_OBJECT_OPTION_HTTP_COOKIE_MODE + + Signed-off-by: Toni Gundogdu + +src/lua/quvi/opts.h + +commit 5af74c3 +Author: Toni Gundogdu +Date: 2013-02-28 + + lua/def.h: Rename human-readable variables + + Rename the crypto QOCO_* variables. Add HRE_COOKIE_MODE. + + Signed-off-by: Toni Gundogdu + +src/lua/def.h +src/lua/quvi/crypto/copts.c + +commit c7e5b77 +Author: Toni Gundogdu +Date: 2013-02-26 + + Remove quvi.http.fetch option 'cookie' + + This paves way for the new set of cookie features provided via + the (quvi-object) quvi.http.cookie interface. + + Signed-off-by: Toni Gundogdu + +src/lua/quvi/opts.c +src/lua/quvi/opts.h +src/net/def.h + +commit cbd57de +Author: Toni Gundogdu +Date: 2013-02-21 + + Add curl/reset.c: c_reset + + Reset the cURL handle back to the default state. This paves the way for + the additional cookie and header features. + + Signed-off-by: Toni Gundogdu + +src/api/media_new.c +src/api/playlist_new.c +src/api/scan_new.c +src/api/subtitle_new.c +src/curl/Makefile.am +src/curl/init.c +src/curl/reset.c +src/lua/exec_media_script_parse.c +src/lua/exec_playlist_script_parse.c +src/lua/exec_subtitle_script_parse.c + +commit 8eb25b7 +Author: Toni Gundogdu +Date: 2013-03-01 + + DOC: QuviInfo: Add doxy comments + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qinfo.h + +commit f4d9f06 +Author: Toni Gundogdu +Date: 2013-03-01 + + DOC: Add libcURL session handle + + Document libcURL session handle in the Glossary: Terminology + section of the C API reference documentation. + + Signed-off-by: Toni Gundogdu + +src/api/doxy/getting_started.dp +src/api/doxy/glossary_termino.dp + +commit cfc02f8 +Author: Toni Gundogdu +Date: 2013-02-19 + + Revise doxy/dirs: Add subtitle directories + + Signed-off-by: Toni Gundogdu + +src/api/doxy/dirs.dp + +commit 05ddf48 +Merge: fd810a2 dc654ea +Author: Toni Gundogdu +Date: 2013-02-10 + + Merge branch 'tg/next/1.0__quvi_supports__subtitle' into tg/next/1.0 + +commit dc654ea +Author: Toni Gundogdu +Date: 2013-02-10 + + examples/supports.c: Add subtitle support + + Signed-off-by: Toni Gundogdu + +examples/supports.c + +commit 0b5c617 +Author: Toni Gundogdu +Date: 2013-02-10 + + quvi_supports: Handle QUVI_SUPPORTS_TYPE_SUBTITLE + + Signed-off-by: Toni Gundogdu + +src/api/supports.c + +commit 0b2f23e +Author: Toni Gundogdu +Date: 2013-02-10 + + QuviSupportsType: Add QUVI_SUPPORTS_TYPE_SUBTITLE + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qsupp.h + +commit fd810a2 +Author: Toni Gundogdu +Date: 2013-02-10 + + examples/script.c: Cleanup + + Remove unused typedef and extra semicolon. + + Signed-off-by: Toni Gundogdu + +examples/script.c + +commit 9e6e21f +Author: Toni Gundogdu +Date: 2013-02-06 + + Rename all occurences of "subrip" specifier to "srt" + + Signed-off-by: Toni Gundogdu + +examples/subtitle.c +src/api/doxy/parse_subtitle.dp + +commit ce23b2a +Author: Toni Gundogdu +Date: 2013-02-02 + + Update POTFILES.in + + Signed-off-by: Toni Gundogdu + +po/POTFILES.in + +commit 7d631c7 +Merge: 5489d96 0367287 +Author: Toni Gundogdu +Date: 2013-02-02 + + Merge branch 'tg/next/1.0__doc_quvi_object' into tg/next/1.0 + +commit 0367287 +Author: Toni Gundogdu +Date: 2013-02-02 + + Add doc/man7/Makefile.in to .gitignore + + Signed-off-by: Toni Gundogdu + +.gitignore + +commit 1090ddf +Author: Toni Gundogdu +Date: 2013-02-02 + + doc/man7/: Add quvi-object.7.txt + + This manual documents the 'quvi-object' (quvi.*). + + Signed-off-by: Toni Gundogdu + +doc/man7/Makefile.am +doc/man7/quvi-object.7.txt + +commit 03cdfff +Author: Toni Gundogdu +Date: 2013-02-02 + + doc/Makefile.am: SUBDIRS: Add man7 + + Signed-off-by: Toni Gundogdu + +doc/Makefile.am + +commit 9d7e776 +Author: Toni Gundogdu +Date: 2013-02-02 + + configure.ac: AC_CONFIG_FILES: Add doc/man7/ + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit 5489d96 +Author: Toni Gundogdu +Date: 2013-02-02 + + libquvi.3.txt: SEE ALSO: Add quvi-object, quvi-modules + + Signed-off-by: Toni Gundogdu + +doc/man3/libquvi.3.txt + +commit 4563a52 +Author: Toni Gundogdu +Date: 2013-02-01 + + src/hdr= Reorganize source files alphabetically + + Signed-off-by: Toni Gundogdu + +Makefile.am +doc/Makefile.am +doc/dox/Makefile.am +examples/lib/Makefile.am +src/Makefile.am +src/api/Makefile.am +src/curl/Makefile.am +src/lua/Makefile.am +src/misc/Makefile.am +src/net/Makefile.am +src/quvi-0.9/Makefile.am +src/quvi-0.9/quvi/Makefile.am +tests/lib/Makefile.am + +commit cb1a67f +Author: Toni Gundogdu +Date: 2013-02-01 + + Rename MS_EMPTY to GS_EMPTY_S + + Signed-off-by: Toni Gundogdu + +src/lua/def.h +src/lua/quvi/http/fetch.c +src/lua/quvi/http/metainfo.c +src/lua/quvi/http/resolve.c + +commit 9f89cd3 +Author: Toni Gundogdu +Date: 2013-02-01 + + Add m_slist_free_full + + Add a wrapper function identical to g_slist_free_full, except + that this function returns immediately if the pointer parameter + is NULL. g_slist_free_full became available in GLib 2.28. + + NOTE: HAVE_GLIB_2_28 is not currently defined at all + + Signed-off-by: Toni Gundogdu + +src/api/free.c +src/api/scan_free.c +src/lua/quvi/opts.c +src/misc/Makefile.am +src/misc/media.c +src/misc/playlist.c +src/misc/slst.c +src/misc/slst.h +src/misc/subtitle.c + +commit d77a1c2 +Author: Toni Gundogdu +Date: 2013-02-01 + + Rename autogen.sh to bootstrap.sh + + Signed-off-by: Toni Gundogdu + +README +autogen.sh +bootstrap.sh + +commit 2deab14 +Merge: d17ab4e f485eb5 +Author: Toni Gundogdu +Date: 2013-02-01 + + Merge branch 'tg/next/1.0__crypto' into tg/next/1.0 + +commit f485eb5 +Author: Toni Gundogdu +Date: 2013-01-31 + + Add src/gcrypt/Makefile.in to .gitignore + + Signed-off-by: Toni Gundogdu + +.gitignore + +commit 5d08e47 +Author: Toni Gundogdu +Date: 2013-01-31 + + README: Add libgcrypt to Requirements + + Signed-off-by: Toni Gundogdu + +README + +commit bb1232e +Author: Toni Gundogdu +Date: 2013-01-31 + + Extend: convenience library: Add gcrypt + + Implement the crypto support bridging libquvi with libgcrypt. This + librar is used by the quvi object crypto functions (quvi.crypto.*). + + This adds a new libquvi prerequisite: libgcrypt + + Signed-off-by: Toni Gundogdu + +configure.ac +src/Makefile.am +src/gcrypt/Makefile.am +src/gcrypt/crypto.c +src/gcrypt/crypto.h +src/gcrypt/init.c + +commit f12e093 +Author: Toni Gundogdu +Date: 2013-01-31 + + Extend: quvi object: Add crypto support + + Add quvi.crypto.{encrypt,decrypt,hash} support. libquvi scripts may use + these functions if need be. + + Signed-off-by: Toni Gundogdu + +src/lua/Makefile.am +src/lua/init.c +src/lua/quvi/crypto/copts.c +src/lua/quvi/crypto/en_decrypt.c +src/lua/quvi/crypto/err.c +src/lua/quvi/crypto/err.h +src/lua/quvi/crypto/hash.c +src/lua/quvi/crypto/opts.h + +commit 9897bea +Author: Toni Gundogdu +Date: 2013-01-31 + + Extend: quvi object: Add base64 support + + Add quvi.base64.{encode,decode} support. libquvi scripts may use these + functions if need be. + +src/lua/Makefile.am +src/lua/init.c +src/lua/quvi/base64/decode.c +src/lua/quvi/base64/encode.c + +commit e14d0a0 +Author: Toni Gundogdu +Date: 2013-01-31 + + QuviObjectOption: Add crypto options + + Signed-off-by: Toni Gundogdu + +src/lua/quvi/opts.h + +commit 8be53de +Author: Toni Gundogdu +Date: 2013-01-31 + + lua/def.h: Add crypto/base64 related quvi object opts + + Signed-off-by: Toni Gundogdu + +src/lua/def.h + +commit dd4800c +Author: Toni Gundogdu +Date: 2013-01-31 + + QuviError: Add QUVI_ERROR_GCRYPT_INIT + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qerror.h + +commit c695bc3 +Author: Toni Gundogdu +Date: 2013-01-31 + + quvi_errmsg: Add libgcrypt init error message + + Signed-off-by: Toni Gundogdu + +src/api/errmsg.c + +commit 3c5137b +Author: Toni Gundogdu +Date: 2013-01-31 + + quvi_new: Initialize libgcrypt + + Signed-off-by: Toni Gundogdu + +src/api/new.c + +commit 84d9d2f +Author: Toni Gundogdu +Date: 2013-01-30 + + configure.ac: Add AM_PATH_LIBGCRYPT + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit d17ab4e +Author: Toni Gundogdu +Date: 2013-02-01 + + _http_metainfo: Remove unused variable + + Signed-off-by: Toni Gundogdu + +src/net/http_metainfo.c + +commit 6c8b505 +Author: Toni Gundogdu +Date: 2013-02-01 + + l_quvi_http_fetch: Remove unused variable + + Signed-off-by: Toni Gundogdu + +src/lua/quvi/http/fetch.c + +commit 83b407e +Author: Toni Gundogdu +Date: 2013-02-01 + + FIX: examples/supports.c: type_n: Return correct type + + Signed-off-by: Toni Gundogdu + +examples/supports.c + +commit af4cc6c +Author: Toni Gundogdu +Date: 2013-01-31 + + l_setfield_s: Take length parameter + + If the length parameter value is >0, then lua_pushlstring. This + makes it possible to push strings that contain embedded zeros. + + Signed-off-by: Toni Gundogdu + +src/lua/exec_media_script_ident.c +src/lua/exec_media_script_parse.c +src/lua/exec_playlist_script_ident.c +src/lua/exec_playlist_script_parse.c +src/lua/exec_scan_script_parse.c +src/lua/exec_subtitle_export_script_export.c +src/lua/exec_subtitle_export_script_ident.c +src/lua/exec_subtitle_script_ident.c +src/lua/exec_subtitle_script_parse.c +src/lua/quvi/http/fetch.c +src/lua/quvi/http/metainfo.c +src/lua/quvi/http/resolve.c +src/lua/setfield.c +src/lua/setfield.h +src/lua/util/exec_util_resolve_redirections.c + +commit 6d16861 +Author: Toni Gundogdu +Date: 2013-01-31 + + l_quvi_object_opts_new: Add lua index param + +src/lua/quvi/http/fetch.c +src/lua/quvi/http/metainfo.c +src/lua/quvi/http/resolve.c +src/lua/quvi/opts.c +src/lua/quvi/opts.h + +commit de02036 +Author: Toni Gundogdu +Date: 2013-01-31 + + src/api/Makefile.am: Add vim modeline + + Signed-off-by: Toni Gundogdu + +src/api/Makefile.am + +commit 4969151 +Author: Toni Gundogdu +Date: 2013-01-30 + + Replace luaL_openlib with luaL_register + + luaL_openlib was replaced with luaL_register in Lua 5.1 + + Signed-off-by: Toni Gundogdu + +src/lua/init.c + +commit 9993e33 +Author: Toni Gundogdu +Date: 2013-01-30 + + Remove unused variable + + Signed-off-by: Toni Gundogdu + +src/api/media_stream_select.c + +commit ba58e28 +Merge: faa7cdb e9610c6 +Author: Toni Gundogdu +Date: 2013-01-18 + + Merge branch 'tg/next/1.0__quvi_object__make_http' into tg/next/1.0 + +commit e9610c6 +Author: Toni Gundogdu +Date: 2013-01-18 + + Rename quvi.* functions + + Rename the existing quvi object functions. All three are + HTTP functions, make these accessible as quvi.http.* + + Signed-off-by: Toni Gundogdu + +src/lua/init.c +src/lua/quvi/http/fetch.c +src/lua/quvi/http/metainfo.c +src/lua/quvi/http/resolve.c + +commit f457def +Author: Toni Gundogdu +Date: 2013-01-18 + + lua: Move under "http" + + Signed-off-by: Toni Gundogdu + +src/lua/Makefile.am +src/lua/quvi/fetch.c +src/lua/quvi/http/fetch.c +src/lua/quvi/http/metainfo.c +src/lua/quvi/http/resolve.c +src/lua/quvi/metainfo.c +src/lua/quvi/resolve.c + +commit faa7cdb +Merge: 7dc143f 6165f6c +Author: Toni Gundogdu +Date: 2013-01-18 + + Merge branch 'tg/next/1.0__remove_quvi_object_fetch_option_system' into tg/next/1.0 + +commit 6165f6c +Author: Toni Gundogdu +Date: 2013-01-18 + + api: Remove QuviCallbackStatusFetch + + Having only one fetch (for URL) is enough. + + Signed-off-by: Toni Gundogdu + +examples/lib/status.c +src/quvi-0.9/quvi/qcallback.h + +commit 18d9e64 +Author: Toni Gundogdu +Date: 2013-01-18 + + lua: Replace old quvi object option system + + Discard the old option system used with the quvi object. + Use the new l_quvi_object_opts_* interface, instead. + + This patch takes the first step removing the 'quvi fetch types' + support from the library. + + Signed-off-by: Toni Gundogdu + +src/_quvi_net_s.h +src/api/scan_new.c +src/curl/fetch.c +src/curl/http_metainfo.c +src/lua/quvi/fetch.c +src/net/fetch.c +src/net/fetch.h +src/net/handle.c +src/net/http_metainfo.c + +commit ecc9ea7 +Author: Toni Gundogdu +Date: 2013-01-18 + + net: Remove opt.{c,h} implementing n_opt_* interface + + Signed-off-by: Toni Gundogdu + +src/net/Makefile.am +src/net/opt.c +src/net/opt.h + +commit 1401875 +Author: Toni Gundogdu +Date: 2013-01-18 + + Remove _quvi_net_opt_s.h + + Signed-off-by: Toni Gundogdu + +src/Makefile.am +src/_quvi_net_opt_s.h + +commit 7dc143f +Author: Toni Gundogdu +Date: 2013-01-17 + + lua: quvi.fetch: Rewrite for l_quvi_object_opts_* + + Rewrite the implementation using the l_quvi_object_opts_* interface. + Additionally, quvi.fetch will now return a table, similarly to that + of quvi.resolve and quvi.metainfo. + + Signed-off-by: Toni Gundogdu + +src/lua/def.h +src/lua/quvi/fetch.c + +commit caad5f8 +Author: Toni Gundogdu +Date: 2013-01-17 + + lua: quvi.resolve: Rewrite for l_quvi_object_opts_* + + Rewrite the implementation using the l_quvi_object_opts_* interface. + In addition to this, quvi.resolve will now return a table containing: + * error_message # set only if quvi_code is != QUVI_OK (0) + * response_code + * resolved_url # the new destination or empty + * quvi_code + + Signed-off-by: Toni Gundogdu + +src/lua/def.h +src/lua/quvi/resolve.c + +commit af9656c +Merge: c996092 de3cc46 +Author: Toni Gundogdu +Date: 2013-01-17 + + Merge branch 'tg/next/1.0__extend_quvi_object__add_metainfo' into tg/next/1.0 + +commit de3cc46 +Author: Toni Gundogdu +Date: 2013-01-15 + + lua: Add quvi.metainfo function + + This function may be used to send a HTTP HEAD request to the server. The + function will return: quvi code, quvi error message, server response code, + content-type and content-length in a table. + + For example: + local C = require 'quvi/const' + local o = { [C.qoo_croak_if_error] = false } + local r = quvi.metainfo(URL, o) + if r.response_code ==404 then + r = quvi.metainfo(URL2, o) + if #r.error_message ==0 then + for k,v in pairs(r) do print(k,v) end + else + error(r.error_message) + end + end + + See also: + * http://article.gmane.org/gmane.comp.web.flash.quvi/160 + + Signed-off-by: Toni Gundogdu + +src/lua/Makefile.am +src/lua/def.h +src/lua/init.c +src/lua/quvi/metainfo.c + +commit 2abc587 +Author: Toni Gundogdu +Date: 2013-01-15 + + lua: Add quvi/opts.{c,h} + + The purpose of l_quvi_object_opts_* is to provide a common interface + to set various options passed to to the quvi object functions. + + For example: + * libcURL related options, e.g. user-agent or cookie + + This will eventually replace the quvi object option setting + functionality residing in the convenience library 'net'. + +src/lua/Makefile.am +src/lua/quvi/opts.c +src/lua/quvi/opts.h + +commit c996092 +Merge: 8ab3dc9 63b5d63 +Author: Toni Gundogdu +Date: 2013-01-15 + + Merge branch 'tg/next/1.0__add_subtitles' into tg/next/1.0 + +commit 63b5d63 +Author: Toni Gundogdu +Date: 2013-01-12 + + doc: main: Add subpage parse_subtitle + + Signed-off-by: Toni Gundogdu + +src/api/doxy/main.dp.in + +commit 9e456f3 +Author: Toni Gundogdu +Date: 2013-01-12 + + doc: Add parse_subtitle page + + Signed-off-by: Toni Gundogdu + +src/api/doxy/parse_subtitle.dp + +commit e433910 +Author: Toni Gundogdu +Date: 2013-01-12 + + doc: select_stream: Revise + + Signed-off-by: Toni Gundogdu + +src/api/doxy/select_stream.dp + +commit 31d4683 +Author: Toni Gundogdu +Date: 2013-01-12 + + doc: groups: define group subprop + + Signed-off-by: Toni Gundogdu + +src/api/doxy/groups.dp + +commit 846ccc1 +Author: Toni Gundogdu +Date: 2013-01-12 + + doc: glossary_termino: Add subtitle subsections + + Signed-off-by: Toni Gundogdu + +src/api/doxy/glossary_termino.dp + +commit 17cdc20 +Author: Toni Gundogdu +Date: 2013-01-12 + + doc: glossary_scripts: Add subtitle scripts + + Signed-off-by: Toni Gundogdu + +src/api/doxy/glossary_scripts.dp + +commit ff95e59 +Author: Toni Gundogdu +Date: 2013-01-12 + + doc: src/api/Makefile.am: Add new doxy page files + + Signed-off-by: Toni Gundogdu + +src/api/Makefile.am + +commit 7afe19f +Author: Toni Gundogdu +Date: 2013-01-12 + + tests/script.c: Update for subtitle enums + + Signed-off-by: Toni Gundogdu + +tests/script.c + +commit 2f27d74 +Author: Toni Gundogdu +Date: 2013-01-12 + + tests: Add subtitle.c + + Signed-off-by: Toni Gundogdu + +tests/Makefile.am +tests/subtitle.c + +commit 6b1ccf6 +Author: Toni Gundogdu +Date: 2013-01-12 + + examples/script.c: Update for subtitle scripts + + Signed-off-by: Toni Gundogdu + +examples/script.c + +commit 24e6ba0 +Author: Toni Gundogdu +Date: 2013-01-12 + + examples: Add subtitle.c + + Signed-off-by: Toni Gundogdu + +examples/Makefile.am +examples/subtitle.c + +commit 38052d5 +Author: Toni Gundogdu +Date: 2013-01-12 + + examples/lib/: Add quvi_subtitle_t + + Signed-off-by: Toni Gundogdu + +examples/lib/cleanup.c +examples/lib/examples.h +examples/lib/var.c + +commit 9540447 +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: Makefile.am: Add new impl. files + + Signed-off-by: Toni Gundogdu + +src/lua/Makefile.am + +commit bee2ec1 +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: Add match_url_to_subtitle_script.c + + Signed-off-by: Toni Gundogdu + +src/lua/match_url_to_subtitle_script.c + +commit e7a9a8b +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: Add exec_subtitle_script_parse.c + + Signed-off-by: Toni Gundogdu + +src/lua/exec_subtitle_script_parse.c + +commit 8559186 +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: Add exec_subtitle_script_ident.c + + Signed-off-by: Toni Gundogdu + +src/lua/exec_subtitle_script_ident.c + +commit b4cd52c +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: Add exec_subtitle_export_script_export.c + + Signed-off-by: Toni Gundogdu + +src/lua/exec_subtitle_export_script_export.c + +commit 544f192 +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: Add exec_subtitle_export_script_ident.c + + Signed-off-by: Toni Gundogdu + +src/lua/exec_subtitle_export_script_ident.c + +commit 4350ae7 +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: exec.h: Declare subtitle script functions + + Signed-off-by: Toni Gundogdu + +src/lua/exec.h + +commit 8be6e26 +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: def.h: Add subtitle script key names + + Signed-off-by: Toni Gundogdu + +src/lua/def.h + +commit 9e6f234 +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: Move comment + + Signed-off-by: Toni Gundogdu + +src/lua/exec_playlist_script_ident.c +src/lua/exec_scan_script_parse.c + +commit d10b11b +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: exec_playlist_script_parse.c: l_chk_assign_s: Set trim flag + + Signed-off-by: Toni Gundogdu + +src/lua/exec_playlist_script_parse.c + +commit b708c97 +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: exec_media_script_parse.c: l_chk_assign_s: Set trim flag + + Signed-off-by: Toni Gundogdu + +src/lua/exec_media_script_parse.c + +commit 429dd7a +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: l_chk{_assign}_s: Add trim flag + + Signed-off-by: Toni Gundogdu + +src/lua/chk.c +src/lua/chk.h + +commit cc00fe8 +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: exec_media_script_ident.c: Cleanup + + Signed-off-by: Toni Gundogdu + +src/lua/exec_media_script_ident.c + +commit 5e63137 +Author: Toni Gundogdu +Date: 2013-01-12 + + misc: Makefile.am: Add new impl. files + + Signed-off-by: Toni Gundogdu + +src/misc/Makefile.am + +commit 826f795 +Author: Toni Gundogdu +Date: 2013-01-12 + + misc: Add match_subtitle_export_script.{c,h} + + Signed-off-by: Toni Gundogdu + +src/misc/match_subtitle_export_script.c +src/misc/match_subtitle_export_script.h + +commit 95df8eb +Author: Toni Gundogdu +Date: 2013-01-12 + + misc: Add match_subtitle_script.{c,h} + + Signed-off-by: Toni Gundogdu + +src/misc/match_subtitle_script.c +src/misc/match_subtitle_script.h + +commit 7297d9f +Author: Toni Gundogdu +Date: 2013-01-12 + + misc: m_script_free: free subtitle 'export format' property + + Signed-off-by: Toni Gundogdu + +src/misc/script_free.c + +commit 50bc0b0 +Author: Toni Gundogdu +Date: 2013-01-12 + + misc: Add src/misc/subtitle_export.* + + Signed-off-by: Toni Gundogdu + +src/misc/subtitle_export.c +src/misc/subtitle_export.h + +commit 2b72d7f +Author: Toni Gundogdu +Date: 2013-01-12 + + misc: Add src/misc/subtitle.* + + Signed-off-by: Toni Gundogdu + +src/misc/subtitle.c +src/misc/subtitle.h + +commit dce2a71 +Author: Toni Gundogdu +Date: 2013-01-12 + + misc: scan_scripts.c: Add subtitle scripts + + Other: + * m_scan_scripts: rewrite: eradicate the if-blocks + * _script_new: free file contents buffer + * _chk_script_ident: Revise + + Signed-off-by: Toni Gundogdu + +src/misc/scan_scripts.c + +commit 4ead986 +Author: Toni Gundogdu +Date: 2013-01-12 + + api: Impl. quvi_subtitle_* functions + + Signed-off-by: Toni Gundogdu + +src/api/Makefile.am +src/api/subtitle_export_data.c +src/api/subtitle_export_free.c +src/api/subtitle_export_new.c +src/api/subtitle_free.c +src/api/subtitle_lang_get.c +src/api/subtitle_lang_next.c +src/api/subtitle_lang_reset.c +src/api/subtitle_new.c +src/api/subtitle_select.c +src/api/subtitle_type_get.c +src/api/subtitle_type_next.c +src/api/subtitle_type_reset.c + +commit 33e5e45 +Author: Toni Gundogdu +Date: 2013-01-12 + + api: quvi_script_{get,next}: Add subtitle script support + + Signed-off-by: Toni Gundogdu + +src/api/script_get.c +src/api/script_next.c + +commit 6459487 +Author: Toni Gundogdu +Date: 2013-01-12 + + api: quvi_media_stream_select: Revise doxy comment + + Other: + * Do g_return_if_fail before assigning qm and q + * Make minor style changes to the code + * Use the renamed QUVI_ERROR_KEYWORD_CROAK + + Signed-off-by: Toni Gundogdu + +src/api/media_stream_select.c + +commit ae870fa +Author: Toni Gundogdu +Date: 2013-01-12 + + api: quvi_media_get: Revise doxy comment + + Signed-off-by: Toni Gundogdu + +src/api/media_get.c + +commit 68b5e36 +Author: Toni Gundogdu +Date: 2013-01-12 + + api: quvi_free: release subtitle scripts + + Signed-off-by: Toni Gundogdu + +src/api/free.c + +commit 950c3fa +Author: Toni Gundogdu +Date: 2013-01-12 + + api: qfunc.h: Add quvi_subtitle_* functions + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qfunc.h + +commit 3015520 +Author: Toni Gundogdu +Date: 2013-01-12 + + api: qscript.h: Add subtitle types and export format property + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qscript.h + +commit 7375710 +Author: Toni Gundogdu +Date: 2013-01-12 + + api: qdef.h: Add subtitle types + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qdef.h + +commit dded606 +Author: Toni Gundogdu +Date: 2013-01-12 + + api: errmsg.c: Add (static) croak message, add subtitle messages + + Signed-off-by: Toni Gundogdu + +src/api/errmsg.c + +commit 5423d1d +Author: Toni Gundogdu +Date: 2013-01-12 + + api: qerror.h: Rename croak enum, add subtitle enums + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qerror.h + +commit 92109fe +Author: Toni Gundogdu +Date: 2013-01-12 + + api: Add qsubtprop.h + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi.h +src/quvi-0.9/quvi/Makefile.am +src/quvi-0.9/quvi/qsubtprop.h + +commit d3c9144 +Author: Toni Gundogdu +Date: 2013-01-12 + + _quvi_s: Add subtitle lists + + Signed-off-by: Toni Gundogdu + +src/_quvi_s.h + +commit a5db33a +Author: Toni Gundogdu +Date: 2013-01-12 + + Add _quvi_subtitle{_export}_s.h + + Signed-off-by: Toni Gundogdu + +src/Makefile.am +src/_quvi_subtitle_export_s.h +src/_quvi_subtitle_s.h + +commit f4a04db +Author: Toni Gundogdu +Date: 2013-01-12 + + _quvi_script_s: Add subtitle 'export format' property + + Signed-off-by: Toni Gundogdu + +src/_quvi_script_s.h + +commit a0cd134 +Author: Toni Gundogdu +Date: 2013-01-12 + + tests: Merge chk_internet and chk_skip lines + + Signed-off-by: Toni Gundogdu + +tests/media.c + +commit 8ab3dc9 +Author: Toni Gundogdu +Date: 2013-01-15 + + test_resolve_nodst: Change test URL + + Signed-off-by: Toni Gundogdu + +tests/resolve.c + +commit b4b5e06 +Author: Toni Gundogdu +Date: 2013-01-12 + + tests: Merge chk_internet and chk_skip lines + + Signed-off-by: Toni Gundogdu + +tests/goto.c +tests/http_metainfo.c +tests/media.c +tests/playlist.c +tests/resolve.c +tests/scan.c +tests/supports.c + +commit 3086fea +Author: Toni Gundogdu +Date: 2013-01-14 + + man: Add LIBQUVI_SCRIPTS_VERBOSE to environment section + + Signed-off-by: Toni Gundogdu + +doc/man3/libquvi.3.txt + +commit f86e597 +Author: Toni Gundogdu +Date: 2013-01-14 + + quvi_new: Do not check LIBQUVI_SCRIPTS_VERBOSE + + Instead of having the library to check the environment value for + LIBQUVI_SCRIPTS_VERBOSE and then set the qargs.verbose flag, leave + it for the quvi/debug module to do. + + quvi_new would initially check the value, but this caused problems + with programs that would first call quvi_and then set the env. + variable value. Most programs will require the quvi_t handle + (returned by quvi_new) to enable the libcCURL verbose output. + + Another possibility was to have the library check the env. variable + value when it calls each script (ident, parse, export, ...) and then set + the qargs.verbose flag. This, however, would result in overhead even + when the debug facility (quvi/debug) was not used by a script. + + Signed-off-by: Toni Gundogdu + +src/_quvi_s.h +src/api/new.c +src/lua/def.h +src/lua/exec_media_script_ident.c +src/lua/exec_media_script_parse.c +src/lua/exec_playlist_script_ident.c +src/lua/exec_playlist_script_parse.c +src/lua/exec_scan_script_parse.c +src/lua/load_util_script.c + +commit f8299fa +Author: Toni Gundogdu +Date: 2013-01-14 + + tests: chk_verbose: Set LIBQUVI_SCRIPTS_VERBOSE + + Signed-off-by: Toni Gundogdu + +tests/lib/env.c + +commit 1da7b1a +Author: Toni Gundogdu +Date: 2013-01-14 + + examples_enable_verbose: Set LIBQUVI_SCRIPTS_VERBOSE + + Signed-off-by: Toni Gundogdu + +examples/lib/enable_verbose.c + +commit ddffe55 +Author: Toni Gundogdu +Date: 2013-01-12 + + lua: exec_util_*.c: Revise comment + + Signed-off-by: Toni Gundogdu + +src/lua/util/exec_util_convert_entities.c +src/lua/util/exec_util_resolve_redirections.c +src/lua/util/exec_util_to_file_ext.c + +commit 22aa8a9 +Merge: b39a202 71cf0d3 +Author: Toni Gundogdu +Date: 2012-12-28 + + Merge branch 'tg/next/1.0_pod_to_asciidoc' into tg/next/1.0 + +commit 71cf0d3 +Author: Toni Gundogdu +Date: 2012-12-28 + + .gitignore: Remove libquvi.3 + + Signed-off-by: Toni Gundogdu + +.gitignore + +commit 1b165d4 +Author: Toni Gundogdu +Date: 2012-12-28 + + autogen.sh: Remove gen_manual + + Do not generate the manual page libquvi(3). This is due to: + * We now produce the manual pages at build time + * We no longer use POD, but asciidoc + + Signed-off-by: Toni Gundogdu + +autogen.sh + +commit 076c45f +Author: Toni Gundogdu +Date: 2012-12-28 + + README: Revise for pod to asciidoc switch + + Add "Documentation" section. Move documentation make targets + under "Documentation". + + Signed-off-by: Toni Gundogdu + +README + +commit 80ca8e0 +Author: Toni Gundogdu +Date: 2012-12-28 + + man: Switch from POD to asciidoc + + Rewrite libquvi(3) using asciidoc syntax. Produce the man3 pages + at build time if a2x was found by configure. + + "make dist{check}" will require a2x. + + Signed-off-by: Toni Gundogdu + +doc/man3/Makefile.am +doc/man3/libquvi.3.pod +doc/man3/libquvi.3.txt + +commit 93be678 +Author: Toni Gundogdu +Date: 2012-12-28 + + Makefile.am: doc: Add man3/ + + Signed-off-by: Toni Gundogdu + +Makefile.am + +commit c0a27db +Author: Toni Gundogdu +Date: 2012-12-28 + + configure.ac: Add a2x check + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit b39a202 +Merge: 755314f 3802d01 +Author: Toni Gundogdu +Date: 2012-12-28 + + Merge branch 'tg/next/1.0_dox_add_latex' into tg/next/1.0 + +commit 3802d01 +Author: Toni Gundogdu +Date: 2012-12-28 + + README: Revise notes for {doc,distdoc} targets + + Add Doxygen to requirements for producing the C API reference + documentation. Revise the notes for the {doc,distdoc} make targets. + + Signed-off-by: Toni Gundogdu + +README + +commit 7661dc6 +Author: Toni Gundogdu +Date: 2012-12-28 + + doc: Add distdoc-{pdf,latex} targets + + Signed-off-by: Toni Gundogdu + +Makefile.am +doc/dox/Makefile.am + +commit 19b0e1e +Author: Toni Gundogdu +Date: 2012-12-28 + + doc: Enable LaTeX output + + Have Doxygen generate the LaTeX output along with PDF. + + Signed-off-by: Toni Gundogdu + +doc/dox/Doxyfile.in + +commit 2189a2a +Author: Toni Gundogdu +Date: 2012-12-28 + + distdoc-html: Store the "html" path only + + Signed-off-by: Toni Gundogdu + +doc/dox/Makefile.am + +commit 755314f +Author: Toni Gundogdu +Date: 2012-12-28 + + doc: Add "common script" to "Glossary: Scripts" + + Signed-off-by: Toni Gundogdu + +src/api/doxy/glossary_scripts.dp + +commit 6d21fc6 +Author: Toni Gundogdu +Date: 2012-12-28 + + doc: Fix script paths + + Signed-off-by: Toni Gundogdu + +src/api/doxy/glossary_scripts.dp + +commit 837a904 +Author: Toni Gundogdu +Date: 2012-12-17 + + README: Fix contrib URL + + Signed-off-by: Toni Gundogdu + +README + +commit 45ac913 +Author: Toni Gundogdu +Date: 2012-12-12 + + FIX: gen-news.sh: Find the closest tagname + + Replaces the buggy tagname extraction with a proper one. + + Signed-off-by: Toni Gundogdu + +gen-news.sh + +commit 147e285 +Author: Toni Gundogdu +Date: 2012-12-08 + + Do not set CURLOPT_WRITE{FUNCTION,DATA} to NULL + + Setting CURLOPT_WRITEDATA to NULL will cause a segfault when + libcurl (v7.21.0) will attempt to write to it. + + http://curl.haxx.se/libcurl/c/curl_easy_setopt.html#CURLOPTWRITEFUNCTION + http://curl.haxx.se/libcurl/c/curl_easy_setopt.html#CURLOPTWRITEDATA + + Signed-off-by: Toni Gundogdu + +src/curl/fetch.c + +commit 93a29af +Merge: cea9232 d7034d7 +Author: Toni Gundogdu +Date: 2012-11-21 + + Merge branch 'tg/next/1.0_agpl' into tg/next/1.0 + +commit d7034d7 +Author: Toni Gundogdu +Date: 2012-11-21 + + Manual: Change LICENSE + + Signed-off-by: Toni Gundogdu + +doc/man3/libquvi.3.pod + +commit 5a451ef +Author: Toni Gundogdu +Date: 2012-11-19 + + README: Change license + + Signed-off-by: Toni Gundogdu + +README + +commit 7b5ebb4 +Author: Toni Gundogdu +Date: 2012-11-18 + + tests/: Change license header + + Signed-off-by: Toni Gundogdu + +tests/goto.c +tests/http_metainfo.c +tests/lib/env.c +tests/lib/qerr.c +tests/lib/re.c +tests/lib/tests.h +tests/media.c +tests/playlist.c +tests/quvi.c +tests/resolve.c +tests/scan.c +tests/script.c +tests/supports.c + +commit 66b7cad +Author: Toni Gundogdu +Date: 2012-11-18 + + examples/: Change license header + + Signed-off-by: Toni Gundogdu + +examples/http_metainfo.c +examples/lib/chk.c +examples/lib/cleanup.c +examples/lib/enable_autoproxy.c +examples/lib/enable_verbose.c +examples/lib/examples.h +examples/lib/exit_if_error.c +examples/lib/status.c +examples/lib/var.c +examples/media.c +examples/playlist.c +examples/resolve.c +examples/scan.c +examples/script.c +examples/supports.c +examples/version.c + +commit 69d0ddd +Author: Toni Gundogdu +Date: 2012-11-18 + + src/: Change license header + + Signed-off-by: Toni Gundogdu + +src/_quvi_http_metainfo_s.h +src/_quvi_macro.h +src/_quvi_media_s.h +src/_quvi_net_opt_s.h +src/_quvi_net_resolve_s.h +src/_quvi_net_s.h +src/_quvi_playlist_s.h +src/_quvi_s.h +src/_quvi_scan_s.h +src/_quvi_script_s.h + +commit 4fa0325 +Author: Toni Gundogdu +Date: 2012-11-18 + + src/quvi-0.9/: Change license header + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi.h +src/quvi-0.9/quvi/qbool.h +src/quvi-0.9/quvi/qcallback.h +src/quvi-0.9/quvi/qdef.h +src/quvi-0.9/quvi/qerror.h +src/quvi-0.9/quvi/qfunc.h +src/quvi-0.9/quvi/qhttpmiprop.h +src/quvi-0.9/quvi/qinfo.h +src/quvi-0.9/quvi/qmediaprop.h +src/quvi-0.9/quvi/qoption.h +src/quvi-0.9/quvi/qplaylistprop.h +src/quvi-0.9/quvi/qscript.h +src/quvi-0.9/quvi/qsupp.h +src/quvi-0.9/quvi/qversion.h + +commit 826e233 +Author: Toni Gundogdu +Date: 2012-11-18 + + src/net/: Change license header + + Signed-off-by: Toni Gundogdu + +src/net/def.h +src/net/fetch.c +src/net/fetch.h +src/net/handle.c +src/net/handle.h +src/net/http_metainfo.c +src/net/opt.c +src/net/opt.h +src/net/resolve.c +src/net/resolve.h + +commit f998652 +Author: Toni Gundogdu +Date: 2012-11-18 + + src/misc/: Change license header + + Signed-off-by: Toni Gundogdu + +src/misc/capture.c +src/misc/match.c +src/misc/match_media_script.c +src/misc/match_media_script.h +src/misc/match_playlist_script.c +src/misc/match_playlist_script.h +src/misc/media.c +src/misc/media.h +src/misc/playlist.c +src/misc/playlist.h +src/misc/re.h +src/misc/resolve.c +src/misc/resolve.h +src/misc/scan_new.c +src/misc/scan_new.h +src/misc/scan_scripts.c +src/misc/script_free.c +src/misc/script_free.h +src/misc/to_utf8.c +src/misc/trim.c +src/misc/unescape.c +src/misc/unescape.h + +commit 1e914ff +Author: Toni Gundogdu +Date: 2012-11-18 + + src/lua/: Change license header + + Signed-off-by: Toni Gundogdu + +src/lua/chk.c +src/lua/chk.h +src/lua/def.h +src/lua/exec.h +src/lua/exec_media_script_ident.c +src/lua/exec_media_script_parse.c +src/lua/exec_playlist_script_ident.c +src/lua/exec_playlist_script_parse.c +src/lua/exec_scan_script_parse.c +src/lua/getfield.c +src/lua/getfield.h +src/lua/init.c +src/lua/load_util_script.c +src/lua/load_util_script.h +src/lua/match_url_to_media_script.c +src/lua/match_url_to_playlist_script.c +src/lua/modify_pkgpath.c +src/lua/quvi/fetch.c +src/lua/quvi/resolve.c +src/lua/setfield.c +src/lua/setfield.h +src/lua/util/exec_util_convert_entities.c +src/lua/util/exec_util_resolve_redirections.c +src/lua/util/exec_util_to_file_ext.c + +commit 42eb658 +Author: Toni Gundogdu +Date: 2012-11-18 + + src/curl/: Change license header + + Signed-off-by: Toni Gundogdu + +src/curl/autoproxy.c +src/curl/autoproxy.h +src/curl/close.c +src/curl/fetch.c +src/curl/http_metainfo.c +src/curl/init.c +src/curl/resolve.c +src/curl/temp.c +src/curl/temp.h + +commit 211092a +Author: Toni Gundogdu +Date: 2012-11-18 + + src/api/: Change license header + + Signed-off-by: Toni Gundogdu + +src/api/errmsg.c +src/api/free.c +src/api/get.c +src/api/http_metainfo_free.c +src/api/http_metainfo_get.c +src/api/http_metainfo_new.c +src/api/media_free.c +src/api/media_get.c +src/api/media_new.c +src/api/media_stream_choose_best.c +src/api/media_stream_next.c +src/api/media_stream_reset.c +src/api/media_stream_select.c +src/api/new.c +src/api/ok.c +src/api/playlist_free.c +src/api/playlist_get.c +src/api/playlist_media_next.c +src/api/playlist_media_reset.c +src/api/playlist_new.c +src/api/resolve_destination_url.c +src/api/resolve_forwarded.c +src/api/resolve_free.c +src/api/resolve_new.c +src/api/scan_free.c +src/api/scan_new.c +src/api/scan_next_media_url.c +src/api/script_get.c +src/api/script_next.c +src/api/set.c +src/api/supports.c +src/api/version.c + +commit 11c4e71 +Author: Toni Gundogdu +Date: 2012-11-18 + + Change license header in shell scripts + + Signed-off-by: Toni Gundogdu + +autogen.sh +gen-news.sh +gen-ver.sh +tests/find_tests.sh +tests/run_tests.sh + +commit 83e23e3 +Author: Toni Gundogdu +Date: 2012-11-18 + + Replace COPYING contents + + Signed-off-by: Toni Gundogdu + +COPYING + +commit cea9232 +Author: Toni Gundogdu +Date: 2012-11-19 + + FIX: tests/resolve.c: #t tests + + Update the tests that previously tested failure with the + g00gle servers when the #t parameter was used. + + Signed-off-by: Toni Gundogdu + +tests/resolve.c + +commit 48e3c33 +Merge: be6f058 496de55 +Author: Toni Gundogdu +Date: 2012-11-18 + + Merge branch 'tg/next/1.0_add_quvi_version_configuration' into tg/next/1.0 + +commit 496de55 +Author: Toni Gundogdu +Date: 2012-11-18 + + examples/version.c: Print QUVI_VERSION_CONFIGURATION + + Signed-off-by: Toni Gundogdu + +examples/version.c + +commit f2c9330 +Author: Toni Gundogdu +Date: 2012-11-18 + + Add QUVI_VERSION_CONFIGURATION + + Add QUVI_VERSION_CONFIGURATION to API. This binds the BUILD_OPTS + defined by the configure. + + Trim the function implementations removing whitespace and + simplifying the switch case. + + Signed-off-by: Toni Gundogdu + +src/api/version.c +src/quvi-0.9/quvi/qversion.h + +commit 02bdc8e +Author: Toni Gundogdu +Date: 2012-11-18 + + configure.ac: Define BUILD_OPTS + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit be6f058 +Author: Toni Gundogdu +Date: 2012-11-18 + + configure.ac: Add CANONICAL_* descriptions + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit 7b37a42 +Author: Toni Gundogdu +Date: 2012-11-06 + + examples/version.c: Revise build {time,target} output + + Print both build time and target in one line. + + Signed-off-by: Toni Gundogdu + +examples/version.c + +commit 3054b85 +Author: Toni Gundogdu +Date: 2012-10-25 + + FIX: quvi_http_metainfo_get: doxy ref + + Signed-off-by: Toni Gundogdu + +src/api/http_metainfo_get.c + +commit 9be0cdd +Author: Toni Gundogdu +Date: 2012-10-25 + + examples/script.c: Remove unnused opts "autoproxy", "verbose" + + Signed-off-by: Toni Gundogdu + +examples/script.c + +commit 2395f69 +Author: Toni Gundogdu +Date: 2012-10-25 + + man3/libquvi.3.pod: Revise AUTHOR + + Signed-off-by: Toni Gundogdu + +doc/man3/libquvi.3.pod + +commit f53f643 +Author: Toni Gundogdu +Date: 2012-10-25 + + FIX: mismatched quotes at line 54 in src/api/media_stream_select.c + + Signed-off-by: Toni Gundogdu + +po/POTFILES.in +src/api/media_stream_select.c + +commit c828821 +Merge: 054cb5a adf2c0d +Author: Toni Gundogdu +Date: 2012-10-25 + + Merge branch 'tg/next/1.0_rename_verify_iface' into tg/next/1.0 + +commit adf2c0d +Author: Toni Gundogdu +Date: 2012-10-25 + + Update POTFILES.in + + Signed-off-by: Toni Gundogdu + +po/POTFILES.in + +commit 767b57a +Author: Toni Gundogdu +Date: 2012-10-25 + + examples/: Rename verify.c + + Signed-off-by: Toni Gundogdu + +examples/Makefile.am +examples/http_metainfo.c +examples/verify.c + +commit 11653f1 +Author: Toni Gundogdu +Date: 2012-10-25 + + examples/lib/status.c: Rename "verify" function + + Signed-off-by: Toni Gundogdu + +examples/lib/status.c + +commit 07b37d4 +Author: Toni Gundogdu +Date: 2012-10-25 + + examples/lib/: Use renamed quvi_http_meta_info_t + + Signed-off-by: Toni Gundogdu + +examples/lib/cleanup.c +examples/lib/examples.h +examples/lib/var.c + +commit fd51d3a +Author: Toni Gundogdu +Date: 2012-10-25 + + tests/: Rename verify.c + + Signed-off-by: Toni Gundogdu + +tests/Makefile.am +tests/http_metainfo.c +tests/verify.c + +commit dd6073a +Author: Toni Gundogdu +Date: 2012-10-25 + + l_exec_util_to_file_ext: Use renamed _quvi_http_metainfo_t + + Signed-off-by: Toni Gundogdu + +src/lua/util/exec_util_to_file_ext.c + +commit 8026a18 +Author: Toni Gundogdu +Date: 2012-10-25 + + _quvi_s: Rename quvi_callback_verify + + Signed-off-by: Toni Gundogdu + +src/_quvi_s.h + +commit b0c2709 +Author: Toni Gundogdu +Date: 2012-10-25 + + _quvi_net_s: Rename "verify" + + Signed-off-by: Toni Gundogdu + +src/_quvi_net_s.h + +commit 5c2415c +Author: Toni Gundogdu +Date: 2012-10-25 + + net/: Rename verify.c + + Signed-off-by: Toni Gundogdu + +src/net/Makefile.am +src/net/handle.c +src/net/http_metainfo.c +src/net/verify.c + +commit 046b965 +Author: Toni Gundogdu +Date: 2012-10-25 + + Rename _quvi_verify_s.h + + Signed-off-by: Toni Gundogdu + +src/Makefile.am +src/_quvi_http_metainfo_s.h +src/_quvi_verify_s.h + +commit a1db4ac +Author: Toni Gundogdu +Date: 2012-10-25 + + curl/: Rename verify.c + + Signed-off-by: Toni Gundogdu + +src/curl/Makefile.am +src/curl/http_metainfo.c +src/curl/verify.c + +commit d88e350 +Author: Toni Gundogdu +Date: 2012-10-25 + + api/Makefile.am: Update + + Signed-off-by: Toni Gundogdu + +src/api/Makefile.am + +commit 0394a95 +Author: Toni Gundogdu +Date: 2012-10-25 + + glossary_termino.dp: Revise "verification" + + Signed-off-by: Toni Gundogdu + +src/api/doxy/glossary_termino.dp + +commit 9e83989 +Author: Toni Gundogdu +Date: 2012-10-25 + + groups.dp: Rename verify group + + Signed-off-by: Toni Gundogdu + +src/api/doxy/groups.dp + +commit f3bb4ef +Author: Toni Gundogdu +Date: 2012-10-25 + + Rename verify_url.dp + + Signed-off-by: Toni Gundogdu + +src/api/doxy/http_metainfo.dp +src/api/doxy/main.dp.in +src/api/doxy/verify_url.dp + +commit 8c97e0f +Author: Toni Gundogdu +Date: 2012-10-25 + + Rename verify_get.c + + Signed-off-by: Toni Gundogdu + +src/api/http_metainfo_get.c +src/api/verify_get.c + +commit c1764df +Author: Toni Gundogdu +Date: 2012-10-25 + + Rename verify_free.c + + Signed-off-by: Toni Gundogdu + +src/api/http_metainfo_free.c +src/api/verify_free.c + +commit cce0f84 +Author: Toni Gundogdu +Date: 2012-10-25 + + Rename verify_new.c + + Signed-off-by: Toni Gundogdu + +src/api/http_metainfo_new.c +src/api/verify_new.c + +commit 1077289 +Author: Toni Gundogdu +Date: 2012-10-25 + + Rename qverifyprop.h + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi.h +src/quvi-0.9/quvi/Makefile.am +src/quvi-0.9/quvi/qhttpmiprop.h +src/quvi-0.9/quvi/qverifyprop.h + +commit 200ec2b +Author: Toni Gundogdu +Date: 2012-10-25 + + qdef.h: Rename quvi_verify_t + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qdef.h + +commit c1fe0c8 +Author: Toni Gundogdu +Date: 2012-10-25 + + qcallback.h: Rename QUVI_CALLBACK_STATUS_VERIFY + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qcallback.h + +commit 4e62b24 +Author: Toni Gundogdu +Date: 2012-10-25 + + qfunc.h: Rename quvi_verify_* + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qfunc.h + +commit 054cb5a +Author: Toni Gundogdu +Date: 2012-10-22 + + DOC: Revise Glossary: Terminology + + Use different wording to describe the "verification process". + Remove the "protocol category" from the documentation. This + feature was removed from the API. + + Signed-off-by: Toni Gundogdu + +src/api/doxy/glossary_termino.dp + +commit 1e08f39 +Author: Toni Gundogdu +Date: 2012-10-16 + + configure.ac: Revise AC_MSG_NOTICE output + + Signed-off-by: Toni Gundogdu + +configure.ac + +commit 888363f +Author: Toni Gundogdu +Date: 2012-10-15 + + examples: Remove unused variables + + Signed-off-by: Toni Gundogdu + +examples/media.c +examples/script.c +examples/supports.c + +commit 269cbd2 +Author: Toni Gundogdu +Date: 2012-10-12 + + qscript.h: Define QUVI_SCRIPT_PROPERTY_FILEPATH in one line + + Signed-off-by: Toni Gundogdu + +src/quvi-0.9/quvi/qscript.h + +commit decf87d +Author: Toni Gundogdu +Date: 2012-09-21 + + FIX: QuviMediaProperty: Double type IDs + + Start the double type IDs definition from QUVI_MEDIA_STREAM_PROPERTY_ID. + +src/quvi-0.9/quvi/qmediaprop.h + +commit b51f18f +Author: Toni Gundogdu +Date: 2012-09-21 + + tests/verify.c: chk_val: Test for >0 + +tests/verify.c + +commit afcb2ce +Author: Toni Gundogdu +Date: 2012-09-17 + + Preserve the optional media properties with goto_url + + Allow the *optional* media properties to carry over from one script + to another. This makes it possible to reuse the previously set + values in another media script. For example: + + - Script A + - sets qargs.title='foo' + - sets qargs.goto_url=... + + - Script B + - reuses the previously set value of qargs.title ('foo') + - parses the remaining media stream properties + +src/lua/exec_media_script_parse.c + +commit f0697c5 +Merge: 5cf9e12 dc48705 +Author: Toni Gundogdu +Date: 2012-09-16 + + Merge branch 'tg/next/1.0_remove_unused_params' into tg/next/1.0 + +commit dc48705 +Author: Toni Gundogdu +Date: 2012-09-16 + + _supports_playlist: Remove unused arguments + + m_match_playlist_script and m_match_media_script no longer take the + "result" parameter. + +src/api/supports.c + +commit 897cd57 +Author: Toni Gundogdu +Date: 2012-09-16 + + m_match_playlist_script: Remove unused parameter + +src/api/playlist_new.c +src/misc/match_playlist_script.c +src/misc/match_playlist_script.h + +commit 9660b81 +Author: Toni Gundogdu +Date: 2012-09-16 + + m_match_media_script: Remove unused parameter + +src/api/media_new.c +src/misc/match_media_script.c +src/misc/match_media_script.h + +commit 5cf9e12 +Merge: b59d303 343a5b5 +Author: Toni Gundogdu +Date: 2012-09-16 + + Merge branch 'tg/next/1.0_rename_tests' into tg/next/1.0 + +commit 343a5b5 +Author: Toni Gundogdu +Date: 2012-09-16 + + Rename test_supports + +tests/supports.c + +commit 35a9184 +Author: Toni Gundogdu +Date: 2012-09-16 + + Rename test_scan + +tests/scan.c + +commit 2116174 +Author: Toni Gundogdu +Date: 2012-09-16 + + Rename test_resolve + +tests/resolve.c + +commit 536834f +Author: Toni Gundogdu +Date: 2012-09-16 + + Rename test_quvi + +tests/quvi.c + +commit 2c2e62b +Author: Toni Gundogdu +Date: 2012-09-16 + + Rename test_playlist + +tests/playlist.c + +commit 3b58c2e +Author: Toni Gundogdu +Date: 2012-09-16 + + Rename test_media + +tests/media.c + +commit b59d303 +Author: Toni Gundogdu +Date: 2012-09-16 + + FIX: QuviCallbackStatusFetch + + Use the same definitions as quvi/const.lua . + +src/quvi-0.9/quvi/qcallback.h + +commit fb46538 +Merge: bb71956 2bfc22a +Author: Toni Gundogdu +Date: 2012-09-16 + + Merge branch 'tg/next/1.0_unescape_input_url' into tg/next/1.0 + +commit 2bfc22a +Author: Toni Gundogdu +Date: 2012-09-16 + + tests/media.c: Add test_media_escaped_url + +tests/media.c + +commit d8e730b +Author: Toni Gundogdu +Date: 2012-09-16 + + tests/playlist.c: Add test_playlist_escaped_url + +tests/playlist.c + +commit 4cc7169 +Author: Toni Gundogdu +Date: 2012-09-16 + + m_match_playlist_script: Unescape URL + + Unescape input URL before passing it to the playlist script's + `ident' function. Do so that the scripts may skip this + step when they determine whether they can parse the URL. + +src/misc/match_playlist_script.c + +commit 3b97540 +Author: Toni Gundogdu +Date: 2012-09-16 + + m_match_media_script: Unescape URL + + Unescape input URL before passing it to the media script's + `ident' function. Do so that the scripts may skip this + step when they determine whether they can parse the URL. + +src/misc/match_media_script.c + +commit 570a16a +Author: Toni Gundogdu +Date: 2012-09-16 + + Add m_unscape_url + +src/misc/Makefile.am +src/misc/unescape.c +src/misc/unescape.h + +commit bb71956 +Merge: 1da853c c54d30a +Author: Toni Gundogdu +Date: 2012-09-16 + + Merge branch 'tg/next/1.0_gettext_support' into tg/next/1.0 + +commit c54d30a +Author: Toni Gundogdu +Date: 2012-09-16 + + README: Add GNU gettext + +README + +commit 42b57aa +Author: Toni Gundogdu +Date: 2012-09-15 + + test_quvi: Change expected (English) error string + +tests/quvi.c + +commit d2a81a2 +Author: Toni Gundogdu +Date: 2012-09-15 + + n_verify: gettextize + +src/net/verify.c + +commit 3851b58 +Author: Toni Gundogdu +Date: 2012-09-15 + + m_match_playlist_script: gettextize + +src/misc/match_playlist_script.c + +commit 748fb88 +Author: Toni Gundogdu +Date: 2012-09-15 + + m_match_media_script: gettextize + +src/misc/match_media_script.c + +commit f82f921 +Author: Toni Gundogdu +Date: 2012-09-15 + + lua/load_util_script.c: gettextize + +src/lua/load_util_script.c + +commit ee26e98 +Author: Toni Gundogdu +Date: 2012-09-15 + + curl/verify.c: gettextize + +src/curl/verify.c + +commit 4f02c77 +Author: Toni Gundogdu +Date: 2012-09-15 + + curl/resolve.c: gettextize + +src/curl/resolve.c + +commit 77ab188 +Author: Toni Gundogdu +Date: 2012-09-15 + + curl/fetch.c: gettextize + +src/curl/fetch.c + +commit 700183b +Author: Toni Gundogdu +Date: 2012-09-15 + + api/media_stream_select.c: gettextize + +src/api/media_stream_select.c + +commit 2624553 +Author: Toni Gundogdu +Date: 2012-09-15 + + api/errmsg.c: gettextize + +src/api/errmsg.c + +commit 226fe1e +Author: Toni Gundogdu +Date: 2012-09-14 + + quvi_new: Add call to bindtextdomain + +src/api/new.c + +commit fafa214 +Author: Toni Gundogdu +Date: 2012-09-14 + + Add po/LINGUAS + +po/LINGUAS + +commit c193a39 +Author: Toni Gundogdu +Date: 2012-09-14 + + Add po/POTFILES.in + +po/POTFILES.in + +commit 34f1caf +Author: Toni Gundogdu +Date: 2012-09-14 + + Add po/Makevars + +po/Makevars + +commit e7a3f21 +Author: Toni Gundogdu +Date: 2012-09-14 + + src/Makefile.am: LIBADD: Add LTLIBINTL + +src/Makefile.am + +commit 5197041 +Author: Toni Gundogdu +Date: 2012-09-14 + + CPPFLAGS: Define LOCALEDIR + +src/Makefile.am +src/api/Makefile.am +src/curl/Makefile.am +src/lua/Makefile.am +src/misc/Makefile.am +src/net/Makefile.am + +commit ed54987 +Author: Toni Gundogdu +Date: 2012-09-14 + + Update .gitignore file + +.gitignore + +commit 5044929 +Author: Toni Gundogdu +Date: 2012-09-14 + + configure.ac: AC_CONFIG_FILES: Add po/Makefile.in + +configure.ac + +commit 44117f5 +Author: Toni Gundogdu +Date: 2012-09-14 + + Makefile.am: SUBDIRS: Add po + +Makefile.am + +commit 40b2478 +Author: Toni Gundogdu +Date: 2012-09-14 + + configure.ac: Add AM_GNU_GETTEXT_VERSION, AM_GNU_GETTEXT + +configure.ac + +commit 1da853c +Merge: e400c89 e07412b +Author: Toni Gundogdu +Date: 2012-09-16 + + Merge branch 'tg/next/1.0_reformat_messages' into tg/next/1.0 + +commit e07412b +Author: Toni Gundogdu +Date: 2012-09-15 + + lua/getfield.c: Revise error messages + +src/lua/getfield.c + +commit 56bf669 +Author: Toni Gundogdu +Date: 2012-09-15 + + lua/exec_scan_script_parse.c: Revise messages + +src/lua/exec_scan_script_parse.c + +commit 17c5c48 +Author: Toni Gundogdu +Date: 2012-09-15 + + lua/exec_playlist_script_parse.c: Revise messages + +src/lua/exec_playlist_script_parse.c + +commit 603a1f1 +Author: Toni Gundogdu +Date: 2012-09-15 + + l_exec_playlist_script_ident: Revise error message + +src/lua/exec_playlist_script_ident.c + +commit e5d9d09 +Author: Toni Gundogdu +Date: 2012-09-15 + + lua/exec_media_script_parse.c: Revise messages + +src/lua/exec_media_script_parse.c + +commit 77a0afd +Author: Toni Gundogdu +Date: 2012-09-15 + + l_exec_media_script_ident: Revise error message + +src/lua/exec_media_script_ident.c + +commit 5314bfa +Author: Toni Gundogdu +Date: 2012-09-15 + + misc/scan_scripts.c: Use [%s] prefix with messages + +src/misc/scan_scripts.c + +commit 01efbd1 +Author: Toni Gundogdu +Date: 2012-09-14 + + misc/trim.c: Use [%s] prefix with warnings + +src/misc/trim.c + +commit 2d2ff2c +Author: Toni Gundogdu +Date: 2012-09-15 + + l_chk_can_parse_url: Revise error message + +src/lua/chk.c + +commit e400c89 +Merge: 0e1c734 5ba9261 +Author: Toni Gundogdu +Date: 2012-09-12 + + Merge branch 'tg/next/1.0_can_parse_url' into tg/next/1.0 + +commit 5ba9261 +Author: Toni Gundogdu +Date: 2012-09-12 + + playlist: ident: _chk_results: Rewrite for can_parse_url + +src/lua/exec_playlist_script_ident.c + +commit 9ca4ea7 +Author: Toni Gundogdu +Date: 2012-09-12 + + media: ident: _chk_results: Rewrite for can_parse_url + +src/lua/exec_media_script_ident.c + +commit 7c0e196 +Author: Toni Gundogdu +Date: 2012-09-12 + + Rename MS_ACCEPTS and PS_ACCEPTS + +src/lua/def.h + +commit 3a3ed59 +Author: Toni Gundogdu +Date: 2012-09-12 + + Rewrite l_chk_accepts as l_chk_can_parse_url + + Parse the can_parse_url flag and the domains string from + the returned dictionary, rather than the subdict (`accepts') + returned by the ident function. + +src/lua/chk.c +src/lua/chk.h + +commit 0e1c734 +Author: Toni Gundogdu +Date: 2012-09-12 + + _chk_common_scripts: Search without VERSION_MM + + Do an additional search from $SCRIPTSDIR without the VERSION_MM + in the path. + +src/misc/scan_scripts.c + +commit a5e5389 +Author: Toni Gundogdu +Date: 2012-09-12 + + _glob_scripts: SCRIPTSDIR: Search without VERSION_MM + + Do an additional search from $SCRIPTSDIR (configure --with-scriptsdir) + without the VERSION_MM in the path. + +src/misc/scan_scripts.c + +commit fa403b0 +Merge: 82edf5b 84aa859 +Author: Toni Gundogdu +Date: 2012-09-12 + + Merge branch 'tg/next/1.0_no_categories' into tg/next/1.0 + +commit 84aa859 +Author: Toni Gundogdu +Date: 2012-09-12 + + examples/media.c: Remove --category support + +examples/media.c + +commit c8dff73 +Author: Toni Gundogdu +Date: 2012-09-12 + + tests/quvi.c: Update boundary check + +tests/quvi.c + +commit 1e56d09 +Author: Toni Gundogdu +Date: 2012-09-12 + + quvi_new: _quvi_new: Do not set default category + +src/api/new.c + +commit 77516c2 +Author: Toni Gundogdu +Date: 2012-09-12 + + quvi_set: _set: Remove QUVI_OPTION_MEDIA_SCRIPT_PROTOCOL_CATEGORY + +src/api/set.c + +commit 382833d +Author: Toni Gundogdu +Date: 2012-09-12 + + _quvi_s: Remove category + +src/_quvi_s.h + +commit 2f8e65e +Author: Toni Gundogdu +Date: 2012-09-12 + + exec_media_script_ident.c: _chk_results: Do not check categories + + Remove the category check. Check the "accepts" value only. + +src/lua/exec_media_script_ident.c + +commit 48cf1eb +Author: Toni Gundogdu +Date: 2012-09-12 + + lua/def.h: Remove MS_CATEGORIES + +src/lua/def.h + +commit d8cd98e +Author: Toni Gundogdu +Date: 2012-09-12 + + Remove qprotocat.h + +src/quvi-0.9/quvi.h +src/quvi-0.9/quvi/Makefile.am +src/quvi-0.9/quvi/qprotocat.h + +commit 0649c86 +Author: Toni Gundogdu +Date: 2012-09-12 + + QuviOption: Remove QUVI_OPTION_MEDIA_SCRIPT_PROTOCOL_CATEGORY + +src/quvi-0.9/quvi/qoption.h + +commit 82edf5b +Author: Toni Gundogdu +Date: 2012-09-11 + + examples: lib/chk.c: Use the intended license + +examples/lib/chk.c + +commit 37813d4 +Merge: f615117 c18e292 +Author: Toni Gundogdu +Date: 2012-09-05 + + Merge branch 'tg/next/1.0_examples_use_gopt' into tg/next/1.0 + +commit c18e292 +Author: Toni Gundogdu +Date: 2012-09-05 + + examples/supports.c: Rewrite using GLib cmdline parser + +examples/supports.c + +commit 763d15e +Author: Toni Gundogdu +Date: 2012-09-05 + + examples/script.c: Rewrite using GLib cmdline parser + +examples/script.c + +commit 44b9d82 +Author: Toni Gundogdu +Date: 2012-09-04 + + examples/media.c: Rewrite using GLib cmdline parser + +examples/media.c + +commit e8708f2 +Author: Toni Gundogdu +Date: 2012-09-04 + + Add examples/lib/chk.c + +examples/lib/Makefile.am +examples/lib/chk.c +examples/lib/examples.h + +commit f615117 +Author: Toni Gundogdu +Date: 2012-09-04 + + examples: Use the examples prefixed functions + +examples/playlist.c +examples/resolve.c +examples/scan.c +examples/script.c +examples/supports.c +examples/verify.c + +commit c8bf7c6 +Author: Toni Gundogdu +Date: 2012-09-04 + + examples/lib/: Use examples_ prefix for lib functions + +examples/lib/cleanup.c +examples/lib/enable_autoproxy.c +examples/lib/enable_verbose.c +examples/lib/examples.h +examples/lib/exit_if_error.c +examples/lib/status.c + +commit 5af2564 +Author: Toni Gundogdu +Date: 2012-09-04 + + QuviMediaScriptProtocolCategory: Add more categories + + Add + - HTTPS + - RTMPT + - RTMPS + - RTMPE + + And + - HTTP_FAMILY + - RTMP_FAMILY + +src/quvi-0.9/quvi/qprotocat.h + +commit e62f6f9 +Author: Toni Gundogdu +Date: 2012-09-04 + + Rename QUVI_MEDIA_SCRIPT_PROTOCOL_CATEGORY_ALL + +src/api/new.c +src/quvi-0.9/quvi/qprotocat.h + +commit bbab1e5 +Author: Toni Gundogdu +Date: 2012-08-30 + + c_init: Use libcurl default for CURLOPT_MAXREDIRS + +src/curl/init.c + +commit 6908afa +Merge: 15403da bb5cb58 +Author: Toni Gundogdu +Date: 2012-08-29 + + Merge branch 'tg/next/1.0_use_intended_license' into tg/next/1.0 + +commit 15403da +Author: Toni Gundogdu +Date: 2012-08-29 + + gen-news.sh: Produce short stats instead + +gen-news.sh + +commit bb5cb58 +Author: Toni Gundogdu +Date: 2012-08-28 + + tests/: Use intended license header + +tests/find_tests.sh +tests/goto.c +tests/lib/env.c +tests/lib/qerr.c +tests/lib/re.c +tests/lib/tests.h +tests/media.c +tests/playlist.c +tests/quvi.c +tests/resolve.c +tests/run_tests.sh +tests/scan.c +tests/script.c +tests/supports.c +tests/verify.c + +commit 69bf158 +Author: Toni Gundogdu +Date: 2012-08-28 + + tests/script.c: count, len: Do not return "const" return type + +tests/script.c + +commit 85b5ba1 +Author: Toni Gundogdu +Date: 2012-08-28 + + examples/: Use intended license header + +examples/lib/cleanup.c +examples/lib/enable_autoproxy.c +examples/lib/enable_verbose.c +examples/lib/examples.h +examples/lib/exit_if_error.c +examples/lib/status.c +examples/lib/var.c +examples/media.c +examples/playlist.c +examples/resolve.c +examples/scan.c +examples/script.c +examples/supports.c +examples/verify.c +examples/version.c + +commit ed5c5e8 +Author: Toni Gundogdu +Date: 2012-08-28 + + l_get_reg_userdata: Do not return "const" return type + +src/lua/getfield.c +src/lua/getfield.h + +commit 7137b5c +Author: Toni Gundogdu +Date: 2012-08-28 + + src/quvi-0.9/: Use intended license header + +src/quvi-0.9/quvi.h +src/quvi-0.9/quvi/qbool.h +src/quvi-0.9/quvi/qcallback.h +src/quvi-0.9/quvi/qdef.h +src/quvi-0.9/quvi/qerror.h +src/quvi-0.9/quvi/qfunc.h +src/quvi-0.9/quvi/qinfo.h +src/quvi-0.9/quvi/qmediaprop.h +src/quvi-0.9/quvi/qoption.h +src/quvi-0.9/quvi/qplaylistprop.h +src/quvi-0.9/quvi/qprotocat.h +src/quvi-0.9/quvi/qscript.h +src/quvi-0.9/quvi/qsupp.h +src/quvi-0.9/quvi/qverifyprop.h +src/quvi-0.9/quvi/qversion.h + +commit 44d63f1 +Author: Toni Gundogdu +Date: 2012-08-28 + + .gitignore: Update for quvi-0.9 path + +.gitignore + +commit 6c98aa8 +Author: Toni Gundogdu +Date: 2012-08-28 + + src/net/: Use intended license header + +src/net/def.h +src/net/fetch.c +src/net/fetch.h +src/net/handle.c +src/net/handle.h +src/net/opt.c +src/net/opt.h +src/net/resolve.c +src/net/resolve.h +src/net/verify.c + +commit 259054e +Author: Toni Gundogdu +Date: 2012-08-28 + + tests/Makefile.am: Add missing libcurl_CFLAGS + +tests/Makefile.am + +commit 2898c57 +Author: Toni Gundogdu +Date: 2012-08-28 + + src/misc/: Use intended license header + +src/misc/capture.c +src/misc/match.c +src/misc/match_media_script.c +src/misc/match_media_script.h +src/misc/match_playlist_script.c +src/misc/match_playlist_script.h +src/misc/media.c +src/misc/media.h +src/misc/playlist.c +src/misc/playlist.h +src/misc/re.h +src/misc/resolve.c +src/misc/resolve.h +src/misc/scan_new.c +src/misc/scan_new.h +src/misc/scan_scripts.c +src/misc/script_free.c +src/misc/script_free.h +src/misc/to_utf8.c +src/misc/trim.c + +commit bacf9cc +Author: Toni Gundogdu +Date: 2012-08-28 + + src/lua/: Use intended license header + +src/lua/chk.c +src/lua/chk.h +src/lua/def.h +src/lua/exec.h +src/lua/exec_media_script_ident.c +src/lua/exec_media_script_parse.c +src/lua/exec_playlist_script_ident.c +src/lua/exec_playlist_script_parse.c +src/lua/exec_scan_script_parse.c +src/lua/getfield.c +src/lua/getfield.h +src/lua/init.c +src/lua/load_util_script.c +src/lua/load_util_script.h +src/lua/match_url_to_media_script.c +src/lua/match_url_to_playlist_script.c +src/lua/modify_pkgpath.c +src/lua/quvi/fetch.c +src/lua/quvi/resolve.c +src/lua/setfield.c +src/lua/setfield.h +src/lua/util/exec_util_convert_entities.c +src/lua/util/exec_util_resolve_redirections.c +src/lua/util/exec_util_to_file_ext.c + +commit a5e800a +Author: Toni Gundogdu +Date: 2012-08-28 + + src/curl/: Use intended license header + +src/curl/autoproxy.c +src/curl/autoproxy.h +src/curl/close.c +src/curl/fetch.c +src/curl/init.c +src/curl/resolve.c +src/curl/temp.c +src/curl/temp.h +src/curl/verify.c + +commit 879e42f +Author: Toni Gundogdu +Date: 2012-08-28 + + src/api/: Use intended license header + +src/api/errmsg.c +src/api/free.c +src/api/get.c +src/api/media_free.c +src/api/media_get.c +src/api/media_new.c +src/api/media_stream_choose_best.c +src/api/media_stream_next.c +src/api/media_stream_reset.c +src/api/media_stream_select.c +src/api/new.c +src/api/ok.c +src/api/playlist_free.c +src/api/playlist_get.c +src/api/playlist_media_next.c +src/api/playlist_media_reset.c +src/api/playlist_new.c +src/api/resolve_destination_url.c +src/api/resolve_forwarded.c +src/api/resolve_free.c +src/api/resolve_new.c +src/api/scan_free.c +src/api/scan_new.c +src/api/scan_next_media_url.c +src/api/script_get.c +src/api/script_next.c +src/api/set.c +src/api/supports.c +src/api/verify_free.c +src/api/verify_get.c +src/api/verify_new.c +src/api/version.c + +commit d92b03d +Author: Toni Gundogdu +Date: 2012-08-28 + + src/: Use intended license header + +src/_quvi_macro.h +src/_quvi_media_s.h +src/_quvi_net_opt_s.h +src/_quvi_net_resolve_s.h +src/_quvi_net_s.h +src/_quvi_playlist_s.h +src/_quvi_s.h +src/_quvi_scan_s.h +src/_quvi_script_s.h +src/_quvi_verify_s.h + +commit 06823c9 +Author: Toni Gundogdu +Date: 2012-08-21 + + LIBQUVI_SHOW_SCRIPT: Output script path if URL was accepted + + When LIBQUVI_SHOW_SCRIPT is defined, output the path to the script that + accepted the input URL. + +src/misc/match_media_script.c +src/misc/match_playlist_script.c + +commit 0ccf608 +Author: Toni Gundogdu +Date: 2012-08-21 + + _chk: Change the 'no match' output message + +src/misc/scan_scripts.c + +commit 7ccb6f3 +Author: Toni Gundogdu +Date: 2012-08-21 + + Make scripts_dir, show_script, show_dir global + + Make these variables available to other modules. The initial values are + set in the m_scan_scripts function. + +src/misc/scan_scripts.c + +commit 14d7307 +Author: Toni Gundogdu +Date: 2012-08-21 + + m_scan_scripts: Do not sort found scripts by path + + Keep the order in which the scripts were found. This makes it possible + to use cwd and LIBQUVI_SCRIPTS_DIR effectively with system wide + installations of libquvi-scripts. + + For example: + mkdir -p media + cp /usr/share/libquvi-scripts/0.9/media/foo.lua media/ + vim media/foo.lua ;# develop, test, etc. + +src/misc/scan_scripts.c + +commit 1aa9cde +Author: Toni Gundogdu +Date: 2012-08-19 + + Revise the libquvi manual page + + * Environment (rename, add new ones) + * Description + * Trim down + +doc/man3/libquvi.3.pod + +commit 4567bf8 +Author: Toni Gundogdu +Date: 2012-08-18 + + autogen.sh: -c option: Revise warning message + +autogen.sh + +commit dc82e0e +Merge: be6c7f6 53eb29a +Author: Toni Gundogdu +Date: 2012-08-18 + + Merge branch 'tg/next/1.0_add_main.dp.in' into tg/next/1.0 + +commit 53eb29a +Author: Toni Gundogdu +Date: 2012-08-18 + + Doxyfile.in: INPUT: Add @top_builddir@/src/api/doxy/ + +doc/dox/Doxyfile.in + +commit 0ee1737 +Author: Toni Gundogdu +Date: 2012-08-18 + + Add main.dp.in + +src/api/Makefile.am +src/api/doxy/main.dp +src/api/doxy/main.dp.in + +commit 835e3de +Author: Toni Gundogdu +Date: 2012-08-18 + + configure.ac: AC_CONFIG_FILES: Add main.dp + + Add main.dp to the AC_CONFIG_FILES array. Add BUILD_TIME. + +configure.ac + +commit be6c7f6 +Merge: 5af7a86 834b46b +Author: Toni Gundogdu +Date: 2012-08-18 + + Merge branch 'tg/next/1.0_new_gen-ver.sh' into tg/next/1.0 + +commit 834b46b +Author: Toni Gundogdu +Date: 2012-08-18 + + configure.ac: Run gen-ver.sh to get the version value + + Use the gen-ver.sh returned value with AC_INIT. Set VERSION_MM to + the gen-ver.sh returned value. + +configure.ac + +commit c4066e8 +Author: Toni Gundogdu +Date: 2012-08-18 + + m4/version.m4: Remove libquvi_lt_(rmaj|rmin|rmic|rel) + + configure.ac will call the gen-ver.sh script to get this information. + +m4/version.m4 + +commit 2f67ce7 +Author: Toni Gundogdu +Date: 2012-08-18 + + libquvi-0.9.pc: Version: Use VN_C (no 'v' prefix) value instead + + Use the VN_C value for Version. This value does not contain the 'v' + prefix. + +configure.ac +libquvi-0.9.pc.in + +commit a2d7516 +Author: Toni Gundogdu +Date: 2012-08-18 + + gen-ver.sh: Rewrite completely + + * Use dirname(1) output + * Add support for -c and -m options + * Do not extract version from m4/version.m4 + - Reserve version.m4 for defining the interface version only + +gen-ver.sh + +commit 5af7a86 +Author: Toni Gundogdu +Date: 2012-08-18 + + FIX: Doxyfile.in: INPUT: Rename quvi-1.0 to quvi-0.9 + +doc/dox/Doxyfile.in + +commit f395c48 +Author: Toni Gundogdu +Date: 2012-08-18 + + README: Rewrite --with-scriptsdir description + +README + +commit 9853c90 +Author: Toni Gundogdu +Date: 2012-08-18 + + tests/scan.c: Expect one or more media URLs + + The page at the URL (of test_scan_short) contains two embedded + media URLs. + +tests/scan.c + +commit f2e3964 +Merge: 00a3c26 ede9a01 +Author: Toni Gundogdu +Date: 2012-08-18 + + Merge branch 'tg/next/1.0_rename_to_0.9' into tg/next/1.0 + +commit ede9a01 +Author: Toni Gundogdu +Date: 2012-08-17 + + configure.ac: Check for libquvi-scripts-0.9 instead + +configure.ac + +commit a3b8907 +Author: Toni Gundogdu +Date: 2012-08-16 + + lib_LTLIBRARIES: Rename to libquvi-0.9.la + +examples/Makefile.am +src/Makefile.am +tests/Makefile.am + +commit f2fbc95 +Author: Toni Gundogdu +Date: 2012-08-16 + + DOC: Use 0.9 instead of 1.0 + +src/api/doxy/getting_started.dp +src/api/doxy/glossary_termino.dp +src/api/doxy/main.dp + +commit 98ee2ab +Author: Toni Gundogdu +Date: 2012-08-16 + + Rename src/quvi-1.0 to src/quvi-0.9 + +configure.ac +examples/Makefile.am +examples/lib/Makefile.am +src/Makefile.am +src/api/Makefile.am +src/curl/Makefile.am +src/lua/Makefile.am +src/misc/Makefile.am +src/net/Makefile.am +src/quvi-0.9/Makefile.am +src/quvi-0.9/quvi.h +src/quvi-0.9/quvi/Makefile.am +src/quvi-0.9/quvi/qbool.h +src/quvi-0.9/quvi/qcallback.h +src/quvi-0.9/quvi/qdef.h +src/quvi-0.9/quvi/qerror.h +src/quvi-0.9/quvi/qfunc.h +src/quvi-0.9/quvi/qinfo.h +src/quvi-0.9/quvi/qmediaprop.h +src/quvi-0.9/quvi/qoption.h +src/quvi-0.9/quvi/qplaylistprop.h +src/quvi-0.9/quvi/qprotocat.h +src/quvi-0.9/quvi/qscript.h +src/quvi-0.9/quvi/qsupp.h +src/quvi-0.9/quvi/qverifyprop.h +src/quvi-0.9/quvi/qversion.h +src/quvi-1.0/Makefile.am +src/quvi-1.0/quvi.h +src/quvi-1.0/quvi/Makefile.am +src/quvi-1.0/quvi/qbool.h +src/quvi-1.0/quvi/qcallback.h +src/quvi-1.0/quvi/qdef.h +src/quvi-1.0/quvi/qerror.h +src/quvi-1.0/quvi/qfunc.h +src/quvi-1.0/quvi/qinfo.h +src/quvi-1.0/quvi/qmediaprop.h +src/quvi-1.0/quvi/qoption.h +src/quvi-1.0/quvi/qplaylistprop.h +src/quvi-1.0/quvi/qprotocat.h +src/quvi-1.0/quvi/qscript.h +src/quvi-1.0/quvi/qsupp.h +src/quvi-1.0/quvi/qverifyprop.h +src/quvi-1.0/quvi/qversion.h +tests/Makefile.am +tests/lib/Makefile.am + +commit b976b1a +Author: Toni Gundogdu +Date: 2012-08-16 + + Rename libquvi-1.0.pc.in to libquvi-0.9.pc.in + + Rename the installed .pc file to libquvi-0.9.pc(.in). Update the Cflags + and the Libs properties in the .pc file. + +Makefile.am +configure.ac +libquvi-0.9.pc.in +libquvi-1.0.pc.in + +commit 00a3c26 +Author: Toni Gundogdu +Date: 2012-08-16 + + Revise README + + Rewrite README entirely, adding installation instructions and testsuite + notes to it. This leaves the INSTALL file for GNU Autotools. + +README + +commit 7b87a69 +Author: Toni Gundogdu +Date: 2012-08-16 + + chk_common_scripts: Add an underscore prefix to function name + +src/misc/scan_scripts.c + +commit 14866bb +Author: Toni Gundogdu +Date: 2012-08-16 + + dir_exists: Add an underscore prefix to function name + +src/misc/scan_scripts.c + +commit 1bde61c +Author: Toni Gundogdu +Date: 2012-08-16 + + script_new: Add an underscore prefix to function name + +src/misc/scan_scripts.c + +commit 94f9d22 +Author: Toni Gundogdu +Date: 2012-08-16 + + DOC: Revise env.dp + +src/api/doxy/env.dp + +commit 92cf68b +Merge: 35740bd 3fcd826 +Author: Toni Gundogdu +Date: 2012-08-16 + + Merge branch 'tg/next/1.0_extend_search_dirs' into tg/next/1.0 + +commit 35740bd +Author: Toni Gundogdu +Date: 2012-08-16 + + Do not keep INSTALL in the repository + + Have GNU Autotools prodce the default INSTALL file. + +.gitignore +INSTALL + +commit 3fcd826 +Author: Toni Gundogdu +Date: 2012-08-16 + + DOC: Add dirs.dp + +src/api/Makefile.am +src/api/doxy/dirs.dp +src/api/doxy/main.dp + +commit ce5dfc2 +Author: Toni Gundogdu +Date: 2012-08-16 + + DOC: Rename scripts.dp to acc_script_prop.dp + +src/api/doxy/acc_script_prop.dp +src/api/doxy/main.dp +src/api/doxy/scripts.dp + +commit 12cbaa1 +Author: Toni Gundogdu +Date: 2012-08-16 + + DOC: Manual: Revise LIBQUVI_SCRIPTS_DIR description + +doc/man3/libquvi.3.pod + +commit 50b2ae7 +Author: Toni Gundogdu +Date: 2012-08-16 + + DOC: Revise LIBQUVI_SCRIPTS_DIR description + +src/api/doxy/env.dp + +commit cf7f31c +Author: Toni Gundogdu +Date: 2012-08-16 + + configure.ac: versionfile: display a warning instead + + Display a warning, instead, if the version file is not found. The + contents of this file are useful to the quvi_version API function + only. The function will return an empty string if the file could + not be read. + +configure.ac + +commit f6f96ca +Author: Toni Gundogdu +Date: 2012-08-13 + + gen-version.sh: Update parsing from m4/version.m4 + +gen-ver.sh + +commit 37e8ffc +Author: Toni Gundogdu +Date: 2012-08-13 + + Split libquvi_lt_rel, define VERSION_MM + + Split libquvi_lt_rel into + libquvi_lt_rmaj + libquvi_lt_rmin + libquvi_lt_rmic + + Define VERSION_MM (major/minor). + +configure.ac +m4/version.m4 + +commit 3d0f748 +Author: Toni Gundogdu +Date: 2012-08-13 + + FIX: Use G_SEARCHPATH_SEPARATOR_S instead + +src/misc/scan_scripts.c + +commit d03a1a6 +Author: Toni Gundogdu +Date: 2012-08-13 + + _glob_scripts, chk_common_scripts: Use new search path + + Search from: + $prefix/share/libquvi-scripts/$version/ + +src/misc/scan_scripts.c + +commit ee464bb +Author: Toni Gundogdu +Date: 2012-08-13 + + _glob_scripts: LIBQUVI_SCRIPTS_DIR: Ignore _glob_scripts_dir return value + +src/misc/scan_scripts.c + +commit df44f13 +Author: Toni Gundogdu +Date: 2012-08-13 + + Rename GlobMode to GlobType + +src/misc/scan_scripts.c + +commit 4050b01 +Author: Toni Gundogdu +Date: 2012-08-13 + + _glob_scripts: LIBQUVI_SCRIPTS_DIR: Treat as a list of directories + + Treat LIBQUVI_SCRIPTS_DIR environment variable value as a list of + directories, each separated by a colon or a comma, depending on the + platform. + + LIBQUVI_SCRIPTS_DIR should no longer be treated as an exclusive setting, + or in other words: continue the search even if it is set. + +src/misc/scan_scripts.c + +commit eecfd97 +Author: Toni Gundogdu +Date: 2012-08-13 + + Remove the "lua/" prefix from script search paths + +src/misc/scan_scripts.c + +commit d85e3d5 +Author: Toni Gundogdu +Date: 2012-08-13 + + chk_common_scripts: LIBQUVI_SCRIPTS_DIR: Treat as a list of directories + + Treat LIBQUVI_SCRIPTS_DIR environment variable value as a list of + directories, each separated by a colon or a comma, depending on the + platform. + + LIBQUVI_SCRIPTS_DIR should no longer be treated as an exclusive setting, + or in other words: continue the search even if it is set. + +src/misc/scan_scripts.c + +commit 94ee961 +Author: Toni Gundogdu +Date: 2012-08-16 + + configure.ac: Revise --with-scriptsdir help string + +configure.ac + +commit 025b07f +Author: Toni Gundogdu +Date: 2012-08-09 + + tests: run_tests.sh: Revise -h output + +tests/run_tests.sh + +commit fe43116 +Author: Toni Gundogdu +Date: 2012-08-09 + + tests: Output absolute path to the produced XML log file + +tests/Makefile.am + +commit 42e40f2 +Merge: d26703d bf8caeb +Author: Toni Gundogdu +Date: 2012-08-09 + + Merge branch 'tg/next/1.0_tests_skip_use_patterns' into tg/next/1.0 + +commit bf8caeb +Author: Toni Gundogdu +Date: 2012-08-09 + + tests: TEST_SKIP: Allow use of regexp patterns + + Make it possible to use regular expression patterns with the TEST_SKIP + enviroment variable. + +tests/lib/env.c + +commit 842e18c +Author: Toni Gundogdu +Date: 2012-08-09 + + tests: Add match function + +tests/lib/Makefile.am +tests/lib/re.c +tests/lib/tests.h + +commit d26703d +Merge: eaddad8 4f569f6 +Author: Toni Gundogdu +Date: 2012-08-09 + + Merge branch 'tg/next/1.0_tests_output_errmsg' into tg/next/1.0 + +commit 4f569f6 +Author: Toni Gundogdu +Date: 2012-08-09 + + tests: Update relevant tests to use qerr_m function + + Have tests that use the internet connection, to log the used URL along + with the produced quvi_errmsg. This makes the reading of these logs easier. + +tests/goto.c +tests/media.c +tests/playlist.c +tests/resolve.c +tests/scan.c +tests/supports.c +tests/verify.c + +commit 9da6776 +Author: Toni Gundogdu +Date: 2012-08-09 + + tests: Add qerr_m function + + This function may be used like qerr, only it takes an URL parameter + which will be dumped to the log, along with the quvi_errmsg. + +tests/lib/qerr.c +tests/lib/tests.h + +commit eaddad8 +Merge: 84a88d2 f5dd715 +Author: Toni Gundogdu +Date: 2012-08-07 + + Merge branch 'tg/next/1.0_playlist_add_title' into tg/next/1.0 + +commit f5dd715 +Author: Toni Gundogdu +Date: 2012-08-07 + + examples: Update examples/playlist.c + + Dump playlist thumbnail URL and title. + +examples/playlist.c + +commit 85e07c9 +Author: Toni Gundogdu +Date: 2012-08-07 + + tests: Update tests/playlist.c for title + +tests/playlist.c + +commit 85946eb +Author: Toni Gundogdu +Date: 2012-08-07 + + Playlist: Add support for title + + This patch adds support for playlist title. + +src/_quvi_playlist_s.h +src/api/playlist_get.c +src/lua/def.h +src/lua/exec_playlist_script_parse.c +src/misc/playlist.c +src/quvi-1.0/quvi/qplaylistprop.h + +commit 84a88d2 +Author: Toni Gundogdu +Date: 2012-08-07 + + tests: Update tests/playlist.c + + Update the boundary check. Add thumbnail checks. + +tests/playlist.c + +commit 5547e0c +Author: Toni Gundogdu +Date: 2012-08-07 + + Playlist: Add support for thumbnail URL + + This patch adds support for a playlist thumbnail URL. + +src/_quvi_playlist_s.h +src/api/playlist_get.c +src/lua/def.h +src/lua/exec_playlist_script_parse.c +src/misc/playlist.c +src/quvi-1.0/quvi/qplaylistprop.h + +commit ea32b92 +Merge: 59906a8 f06663b +Author: Toni Gundogdu +Date: 2012-08-07 + + Merge branch 'tg/next/1.0_rename_stream_format_id' into tg/next/1.0 + +commit f06663b +Author: Toni Gundogdu +Date: 2012-08-07 + + tests/media.c: Rename any "fmt_id" variables and references + + Rename any "fmt_id" variables and references. Use + QUVI_MEDIA_STREAM_PROPERTY_ID, instead. + +tests/media.c + +commit 173083f +Author: Toni Gundogdu +Date: 2012-08-07 + + examples/media.c: Rename -f option + + Rename this option to -s, rename also any "fmt_id" variables and + references. Use QUVI_MEDIA_STREAM_PROPERTY_ID, instead. + +examples/media.c + +commit cafebcd +Author: Toni Gundogdu +Date: 2012-08-07 + + DOC: Rename any "stream format IDs" occurences + + Refer to these as "(media) stream IDs" from now on. Revise the + glossary description for the "Media stream ID". + +src/api/doxy/glossary_termino.dp +src/api/doxy/select_stream.dp + +commit f72ef87 +Author: Toni Gundogdu +Date: 2012-08-07 + + Rename QUVI_ERROR_NO_FORMAT_ID_CROAK + + Rename to QUVI_ERROR_NO_STREAM_ID_CROAK. + +src/quvi-1.0/quvi/qerror.h + +commit 76e9b02 +Author: Toni Gundogdu +Date: 2012-08-07 + + Rename QUVI_MEDIA_STREAM_PROPERTY_FORMAT_ID + + Rename this to QUVI_MEDIA_STREAM_ID. Rename also any fmt_id variables, + including those expected from the media scripts. + +src/_quvi_media_s.h +src/api/media_get.c +src/api/media_stream_select.c +src/lua/def.h +src/lua/exec_media_script_parse.c +src/misc/media.c +src/quvi-1.0/quvi/qmediaprop.h + +commit 59906a8 +Author: Toni Gundogdu +Date: 2012-08-07 + + tests: Include the config.h header + +tests/goto.c +tests/lib/env.c +tests/lib/qerr.c +tests/media.c +tests/playlist.c +tests/quvi.c +tests/resolve.c +tests/scan.c +tests/script.c +tests/supports.c +tests/verify.c + +commit ec4c709 +Author: Toni Gundogdu +Date: 2012-08-07 + + examples: Include the config.h header + +examples/lib/cleanup.c +examples/lib/enable_autoproxy.c +examples/lib/enable_verbose.c +examples/lib/exit_if_error.c +examples/lib/status.c +examples/lib/var.c +examples/media.c +examples/playlist.c +examples/resolve.c +examples/scan.c +examples/script.c +examples/supports.c +examples/verify.c +examples/version.c + +commit 07d8b24 +Author: Toni Gundogdu +Date: 2012-08-07 + + Remove unused QUVI_ERROR_INVALID_CONTENT_LENGTH + + This error is no longer used after the removal of the "verify media + stream URL" feature. + +src/quvi-1.0/quvi/qerror.h + +commit 0f2c87e +Author: Toni Gundogdu +Date: 2012-08-04 + + Redefine media script protocol categories + +src/quvi-1.0/quvi/qprotocat.h + +commit bb47409 +Merge: 133737a 0d4cb69 +Author: Toni Gundogdu +Date: 2012-08-04 + + Merge branch 'tg/next/1.0_make_quvi_fetch_opts_numeric' into tg/next/1.0 + +commit 0d4cb69 +Author: Toni Gundogdu +Date: 2012-08-03 + + curl/fetch.c: Rewrite to use the new enums + +src/curl/fetch.c + +commit c27cf78 +Author: Toni Gundogdu +Date: 2012-08-03 + + Rewrite n_fetch and _cb_status_type to use new enums + + Change this functions to use the new QuviFetchOption and QuviFetchType + enums. + +src/net/fetch.c + +commit 6da7bdd +Author: Toni Gundogdu +Date: 2012-08-03 + + Rewrite n_chk_callback_opts to use the new enums + + Instead of using hardcoded string values to ID the options from script + to quvi.fetch, use QuviFetchOption and QuviFetchType IDs. + +src/net/opt.c + +commit 63dfc42 +Author: Toni Gundogdu +Date: 2012-08-03 + + Add QuviFetchOption and QuviFetchType + +src/net/def.h + +commit cf85ce7 +Author: Toni Gundogdu +Date: 2012-08-03 + + l_quvi_fetch: Replace luaL_checkstring + + Use a lua_isstring-lua_tostring pair, instead. This seems to be a more + safe way to do this. + +src/lua/quvi/fetch.c + +commit 9be1e92 +Author: Toni Gundogdu +Date: 2012-08-03 + + Modify _quvi_net_opt_s to store GString and gdouble + +src/_quvi_net_opt_s.h + +commit 133737a +Author: Toni Gundogdu +Date: 2012-08-03 + + Rename QUVI_CALLBACK_STATUS_FETCH_PAGE + +src/net/fetch.c +src/quvi-1.0/quvi/qcallback.h + +commit b689fc1 +Author: Toni Gundogdu +Date: 2012-08-03 + + DOC: glossary_termino.dp: Add best and default streams + +src/api/doxy/glossary_termino.dp + +commit 0c648df +Author: Toni Gundogdu +Date: 2012-08-03 + + DOC: Move section script_property to glossary_termino.dp + +src/api/doxy/glossary_scripts.dp +src/api/doxy/glossary_termino.dp + +commit af450b4 +Author: Toni Gundogdu +Date: 2012-08-03 + + DOC: glossary_scripts.dp: Add property notes + +src/api/doxy/glossary_scripts.dp + +commit 596ecd4 +Author: Toni Gundogdu +Date: 2012-08-03 + + DOC: glossary_scripts.dp: Make scripts subsections + +src/api/doxy/glossary_scripts.dp + +commit 4e9eb4c +Author: Toni Gundogdu +Date: 2012-08-03 + + DOC: main.dp: Trim down the intro + +src/api/doxy/main.dp + +commit 3c517d2 +Author: Toni Gundogdu +Date: 2012-08-03 + + DOC: scripts.dp: Revise @sa tags + +src/api/doxy/scripts.dp + +commit 700c4bb +Author: Toni Gundogdu +Date: 2012-08-03 + + FIX: DOC: scripts.dp: Use quvi_script_next in the example + + The example was using an incorrect function. + +src/api/doxy/scripts.dp + +commit 6e162af +Author: Toni Gundogdu +Date: 2012-08-03 + + Comment out obsoleted options in Doxyfile + + Do this to omit the following warnings with the later (1.8.1+) versions + of doxygen: + `SHOW_DIRECTORIES' at line 72 of file Doxyfile has become obsolete + `USE_INLINE_TREES' at line 162 of file Doxyfile has become obsolete + `HTML_ALIGN_MEMBERS' at line 135 of file Doxyfile has become + +doc/dox/Doxyfile.in + +commit f9b091d +Author: Toni Gundogdu +Date: 2012-08-02 + + FIX: DOC: Use "quvi_media_stream_next" + +src/api/doxy/parse_media.dp + +commit b853b62 +Author: Toni Gundogdu +Date: 2012-08-02 + + DOC: Update parge_playlist page + + Add a note about using quvi_playlist_media_next and a few examples. + +src/api/doxy/parse_playlist.dp + +commit afa27c6 +Merge: 6ade73c f3deb4c +Author: Toni Gundogdu +Date: 2012-08-02 + + Merge branch 'tg/next/1.0_add_playlist_media_reset' into tg/next/1.0 + +commit f3deb4c +Author: Toni Gundogdu +Date: 2012-08-02 + + tests/playlist.c: Add quvi_playlist_media_reset + +tests/playlist.c + +commit 604d885 +Author: Toni Gundogdu +Date: 2012-08-02 + + Add quvi_playlist_media_reset + +src/api/Makefile.am +src/api/playlist_media_reset.c +src/quvi-1.0/quvi/qfunc.h + +commit 6ade73c +Merge: 460395a 128d64a +Author: Toni Gundogdu +Date: 2012-08-02 + + Merge branch 'tg/next/1.0_playlist_add_properties' into tg/next/1.0 + +commit 128d64a +Merge: 258472b 686a172 +Author: Toni Gundogdu +Date: 2012-08-02 + + Merge branch 'tg/next/1.0_playlist_add_title' into tg/next/1.0_playlist_add_properties + +commit 686a172 +Author: Toni Gundogdu +Date: 2012-08-02 + + tests/playlist.c: Update for QUVI_PLAYLIST_MEDIA_PROPERTY_TITLE + +tests/playlist.c + +commit c0233f2 +Author: Toni Gundogdu +Date: 2012-08-02 + + examples/playlist.c: Query media title + +examples/playlist.c + +commit 081661e +Author: Toni Gundogdu +Date: 2012-08-02 + + Handle QUVI_PLAYLIST_MEDIA_PROPERTY_TITLE + +src/api/playlist_get.c + +commit 218f4cd +Author: Toni Gundogdu +Date: 2012-08-02 + + Add QUVI_PLAYLIST_MEDIA_PROPERTY_TITLE + +src/quvi-1.0/quvi/qplaylistprop.h + +commit 63794c3 +Author: Toni Gundogdu +Date: 2012-08-02 + + Parse media title from playlist script returned data + +src/lua/def.h +src/lua/exec_playlist_script_parse.c +src/misc/playlist.c + +commit b995186 +Author: Toni Gundogdu +Date: 2012-08-02 + + Add title to _quvi_playlist_media_s + +src/_quvi_playlist_s.h + +commit 258472b +Merge: 160bbb0 498ab16 +Author: Toni Gundogdu +Date: 2012-08-02 + + Merge branch 'tg/next/1.0_playlist_add_duration' into tg/next/1.0_playlist_add_properties + +commit 498ab16 +Author: Toni Gundogdu +Date: 2012-08-02 + + tests/playlist.c: Update for duration + +tests/playlist.c + +commit 7f29fbc +Author: Toni Gundogdu +Date: 2012-08-02 + + examples/playlist.c: Query duration + +examples/playlist.c + +commit dacdf0b +Author: Toni Gundogdu +Date: 2012-08-02 + + Handle QUVI_PLAYLIST_MEDIA_PROPERTY_DURATION_MS + +src/api/playlist_get.c + +commit 02201e9 +Author: Toni Gundogdu +Date: 2012-08-02 + + Add QUVI_PLAYLIST_MEDIA_PROPERTY_DURATION_MS + +src/quvi-1.0/quvi/qplaylistprop.h + +commit 45e3d73 +Author: Toni Gundogdu +Date: 2012-08-02 + + Parse duration_ms from playlist script returned data + +src/lua/def.h +src/lua/exec_playlist_script_parse.c + +commit cfd85c6 +Author: Toni Gundogdu +Date: 2012-08-02 + + Add duration_ms to _quvi_playlist_media_s + +src/_quvi_playlist_s.h + +commit 160bbb0 +Author: Toni Gundogdu +Date: 2012-08-02 + + FIX: Do not use break keyword + +src/lua/exec_playlist_script_parse.c + +commit 2c91013 +Author: Toni Gundogdu +Date: 2012-08-02 + + Rename QUVI_PLAYLIST_PROPERTY_MEDIA_URL + +examples/playlist.c +src/api/playlist_get.c +src/quvi-1.0/quvi/qplaylistprop.h +tests/playlist.c + +commit 4998453 +Author: Toni Gundogdu +Date: 2012-08-02 + + tests/playlist.c: Change to use quvi_playlist_media_next + +tests/playlist.c + +commit f57470c +Author: Toni Gundogdu +Date: 2012-08-02 + + examples/playlist.c: Change to use quvi_playlist_media_next + +examples/playlist.c + +commit 2f18fd9 +Author: Toni Gundogdu +Date: 2012-08-02 + + quvi_playlist_get: Advance current playlist media pointer + +src/api/playlist_get.c + +commit c338396 +Author: Toni Gundogdu +Date: 2012-08-02 + + Rewrite l_exec_playlist_script_parse for qargs.media + + This patch makes it possible for the playlist scripts to return + media properties, rather than only media URLs. This will allow adding + support for additional playlist media properties, e.g. duration and + title. + +src/lua/def.h +src/lua/exec_playlist_script_parse.c + +commit 5c95b35 +Author: Toni Gundogdu +Date: 2012-08-02 + + Add m_playlist_media_free + +src/misc/playlist.c +src/misc/playlist.h + +commit 0900628 +Author: Toni Gundogdu +Date: 2012-08-02 + + quvi_playlist_media_next: Use qp->(curr.)media instead + +src/api/playlist_media_next.c + +commit f12c301 +Author: Toni Gundogdu +Date: 2012-08-02 + + _quvi_playlist_s: Move 'media' and 'curr' struct + + Other changes: + * Add _quvi_playlist_media_s + +src/_quvi_playlist_s.h + +commit 88fbf1d +Author: Toni Gundogdu +Date: 2012-08-02 + + Rename playlist_next_media_url.c + +src/api/Makefile.am +src/api/playlist_media_next.c +src/api/playlist_next_media_url.c +src/quvi-1.0/quvi/qfunc.h + +commit 460395a +Author: Toni Gundogdu +Date: 2012-08-02 + + Do not break the lua_next loop + + This may cause issues traversing the Lua stack later. + +src/lua/exec_media_script_ident.c +src/lua/exec_media_script_parse.c + +commit 7940534 +Author: Toni Gundogdu +Date: 2012-08-02 + + Tweak comment + +src/api/media_get.c + +commit 690151c +Author: Toni Gundogdu +Date: 2012-08-02 + + Rewrite _chk_results using lua_next + +src/lua/exec_media_script_ident.c + +commit 4d244b0 +Author: Toni Gundogdu +Date: 2012-08-02 + + Comment out l_getfield_s and l_getfield_b + + Exclude these functions from compiling, as nothing uses them. + +src/lua/getfield.c +src/lua/getfield.h + +commit d0ea9f0 +Author: Toni Gundogdu +Date: 2012-08-02 + + Rewrite l_chk_accepts using lua_next + +src/lua/chk.c + +commit 1ca9bc2 +Author: Toni Gundogdu +Date: 2012-08-02 + + Unify error messages produced in Lua using functions + +src/lua/exec_media_script_ident.c +src/lua/exec_playlist_script_ident.c + +commit 3c6452d +Author: Toni Gundogdu +Date: 2012-08-02 + + Do not include lua/getfield.h + +src/lua/exec_media_script_parse.c +src/lua/exec_playlist_script_parse.c +src/lua/exec_scan_script_parse.c + +commit 6d5f226 +Author: Toni Gundogdu +Date: 2012-08-01 + + Rename all occurences of "(_)quvi_scan_t s" + +src/api/scan_free.c +src/api/scan_new.c +src/api/scan_next_media_url.c +src/misc/scan_new.c + +commit 8db1b8b +Author: Toni Gundogdu +Date: 2012-08-01 + + Rename all occurences of "(_)quvi_playlist_t p(l)" + +src/api/doxy/parse_playlist.dp +src/api/playlist_get.c +src/api/playlist_new.c +src/api/playlist_next_media_url.c +src/api/supports.c +src/lua/exec_playlist_script_ident.c +src/misc/playlist.c + +commit 534e845 +Author: Toni Gundogdu +Date: 2012-08-01 + + Rename all occurences of "(_)quvi_media_t m" + +src/api/doxy/parse_media.dp +src/api/doxy/parse_playlist.dp +src/api/doxy/select_stream.dp +src/api/media_new.c +src/api/supports.c +src/lua/exec_media_script_ident.c +src/lua/match_url_to_media_script.c +src/lua/util/exec_util_convert_entities.c +src/misc/match_media_script.c +src/misc/media.c + +commit 58b0d1c +Author: Toni Gundogdu +Date: 2012-08-01 + + Comment out the unused l_getfield_table_iter_s + + This function is not currently being used. Exclude it from the build. + +src/lua/getfield.c +src/lua/getfield.h + +commit 58869ad +Author: Toni Gundogdu +Date: 2012-08-01 + + Make all scan properties optional + + Instead of forcing the script to return >0 media URLs, allow + returning an empty list. + + These changes go along with the separation of mandatory and optional + properties that were introduced recently in the media scripts. + +src/lua/exec_scan_script_parse.c + +commit 11dc24d +Author: Toni Gundogdu +Date: 2012-08-01 + + Make all playlist properties optional + + Instead of forcing the script to return >0 media URLs or the playlist + ID, allow these values to be empty. + + These changes go along with the separation of mandatory and optional + properties that were introduced recently in the media scripts. + +src/lua/exec_playlist_script_parse.c + +commit ade2b2b +Author: Toni Gundogdu +Date: 2012-08-01 + + Make misc. chk functions reusable to other modules + + Move the _chk_* functions from + exec_media_script_parse.c + to + chk.c + and make them reusable to other modules. + +src/lua/chk.c +src/lua/chk.h +src/lua/def.h +src/lua/exec_media_script_parse.c + +commit fbc2303 +Author: Toni Gundogdu +Date: 2012-08-01 + + Rename chk_accepts.* files + +src/lua/Makefile.am +src/lua/chk.c +src/lua/chk.h +src/lua/chk_accepts.c +src/lua/chk_accepts.h +src/lua/exec_media_script_ident.c +src/lua/exec_playlist_script_ident.c + +commit e9b7d20 +Author: Toni Gundogdu +Date: 2012-08-01 + + tests/supports.c: Use a different URL + + At the time of writing this, libquvi-scripts still lacks the ported + media/funnyordie.lua script. + +tests/supports.c + +commit dc76b04 +Author: Toni Gundogdu +Date: 2012-08-01 + + tests/resolve.c: Rename test_resolve_known_short_t_param + +tests/resolve.c + +commit 6ec079a +Author: Toni Gundogdu +Date: 2012-08-01 + + FIX: comparison of unsigned enum expression < 0 is always false + +src/api/errmsg.c + +commit 4c67db5 +Merge: 9859084 5015e6f +Author: Toni Gundogdu +Date: 2012-08-01 + + Merge branch 'tg/next/1.0_rm_query_fmts' into tg/next/1.0 + + Conflicts: + examples/lib/cleanup.c + src/api/doxy/glossary_termino.dp + src/quvi-1.0/quvi/qoption.h + +commit 9859084 +Merge: 5a5ec4a 3197434 +Author: Toni Gundogdu +Date: 2012-08-01 + + Merge branch 'tg/next/1.0_add_verify_api' into tg/next/1.0 + +commit 3197434 +Merge: b0ce7f5 675f1a0 +Author: Toni Gundogdu +Date: 2012-08-01 + + Merge branch 'tg/next/1.0_add_qargs_streams' into tg/next/1.0_add_verify_api + +commit 675f1a0 +Author: Toni Gundogdu +Date: 2012-07-29 + + tests/media.c: Add test_media_multi, test_media_select + + Add tests for quvi_media_stream_* function set. + +tests/media.c + +commit 675c39c +Author: Toni Gundogdu +Date: 2012-07-29 + + examples/media.c: Use quvi_media_stream_* function set + + Use quvi_media_stream_choose_best (`-b') and quvi_media_stream_select + (`-f') functions. Update usage output. + +examples/media.c + +commit a53a022 +Author: Toni Gundogdu +Date: 2012-07-28 + + Add quvi_media_stream_select + + This patch adds the quvi_media_stream_select function which may be used + to select the stream by its format ID from the available streams. It + supports patterns, comma-separated values and adds support for the + 'croak' keyword. + + This feature was initially created to allow users specify a list of + formats instead of only one, with a bailout method ('croak') to generate + an error if nothing matched. + + Originally this was intended to be added to the quvi/util.lua:choose_format + function but was later replaced with a separate C API function to complement + the qargs.stream support in libquvi 1.0 . + +src/api/Makefile.am +src/api/doxy/glossary_termino.dp +src/api/doxy/main.dp +src/api/doxy/parse_media.dp +src/api/doxy/select_stream.dp +src/api/media_stream_select.c +src/quvi-1.0/quvi/qerror.h +src/quvi-1.0/quvi/qfunc.h + +commit 3007742 +Author: Toni Gundogdu +Date: 2012-07-28 + + Remove QUVI_OPTION_REQUEST_FORMAT + + It is no longer used, since the returned data contains all + available streams (through qargs.streams). + +src/_quvi_s.h +src/api/free.c +src/api/new.c +src/api/set.c +src/lua/def.h +src/quvi-1.0/quvi/qoption.h + +commit 40d6668 +Author: Toni Gundogdu +Date: 2012-07-27 + + Add quvi_media_stream_choose_best + + Add a convenience function that may be used to select the best quality + stream (as determined by the media script) from the returned list. + +src/api/Makefile.am +src/api/media_stream_choose_best.c +src/quvi-1.0/quvi/qfunc.h + +commit 8128632 +Author: Toni Gundogdu +Date: 2012-07-27 + + Add quvi_media_stream_reset + + Add quvi_media_stream_reset function to the API. It may be used to reset + the current media stream pointer. + + Fix a typo in qfunc.h file. + +src/api/Makefile.am +src/api/media_stream_reset.c +src/quvi-1.0/quvi/qfunc.h + +commit 8347a75 +Author: Toni Gundogdu +Date: 2012-07-27 + + Replace qargs.stream_url with qargs.streams + + This commit changes fundamentally how the media scripts return the + parsed properties back to the library. + + Instead of returning only one media stream URL, all of them are + returned in a dictionary, immediately accessible to the applications + using the library. + + This means also that the applications will no longer have to query the + available formats first, set the requested format and then have the + media script parse the media properties again, is a thing of the past. + + There are additional media (stream) properties available, e.g. video + height, width, encoding, etc. when applicable (iow: when they are + returned by the server and may be parsed in a media script). + + It should be noted, however, that with libquvi 1.0, the only mandatory + media property is the media stream URL. There must be at least one of + those returned in the qargs.streams. + + These changes complete the removal of the "verification of media + stream URL" that took place after parsing a media stream URL. + +src/_quvi_media_s.h +src/api/Makefile.am +src/api/media_get.c +src/api/media_stream_next.c +src/lua/def.h +src/lua/exec_media_script_parse.c +src/misc/media.c +src/quvi-1.0/quvi/qfunc.h +src/quvi-1.0/quvi/qmediaprop.h + +commit b0ce7f5 +Author: Toni Gundogdu +Date: 2012-07-29 + + Remove trailing comma from QuviVerifyProperty + +src/quvi-1.0/quvi/qverifyprop.h + +commit 5015e6f +Author: Toni Gundogdu +Date: 2012-07-24 + + examples: Remove quvi_query_formats_* example + + Removed following the removal of the quvi_query_formats_* function set. + +examples/Makefile.am +examples/lib/cleanup.c +examples/lib/examples.h +examples/lib/var.c +examples/query_fmts.c + +commit f548b59 +Author: Toni Gundogdu +Date: 2012-07-24 + + tests: Remove quvi_query_* tests + + These tests are no longer needed due to the removal of the + quvi_query_formats_* function set. + +tests/Makefile.am +tests/goto.c +tests/query_fmts.c + +commit 72f5dd9 +Author: Toni Gundogdu +Date: 2012-07-24 + + tests/lib: Replace test_query_formats in the example + + Remove the test_query_formats from the example to avoid any confusion. + +tests/lib/env.c + +commit e6d5b31 +Author: Toni Gundogdu +Date: 2012-07-24 + + Remove 'query formats' feature + + Querying the available formats for a media URL will no longer be + supported by the library the way it was implemented in 0.4 . The new + design of the media script support that allows returning all available + media stream URLs for different available formats with just one call, + obsoletes the "traditional query formats" implementation found in 0.4 . + + This patch removes the planned support for the quvi_query_formats_* + function set. It also also obsoletes the support for the "query_formats" + function in the media scripts. + +src/Makefile.am +src/_quvi_query_formats_s.h +src/api/Makefile.am +src/api/doxy/glossary_termino.dp +src/api/doxy/groups.dp +src/api/doxy/main.dp +src/api/doxy/parse_media.dp +src/api/doxy/query_formats.dp +src/api/query_formats_free.c +src/api/query_formats_get.c +src/api/query_formats_new.c +src/lua/Makefile.am +src/lua/def.h +src/lua/exec.h +src/lua/exec_media_script_query_formats.c +src/misc/match_media_script.c +src/misc/match_media_script.h +src/misc/scan_scripts.c +src/quvi-1.0/quvi/qdef.h +src/quvi-1.0/quvi/qfunc.h +src/quvi-1.0/quvi/qoption.h + +commit bc7ed9c +Author: Toni Gundogdu +Date: 2012-07-23 + + Add examples/verify.c + + Add an example that uses the quvi_verify_* function set. + Make lib/cleanup.c use "examples.h" instead. + +examples/Makefile.am +examples/lib/cleanup.c +examples/lib/examples.h +examples/lib/var.c +examples/verify.c + +commit 4f45950 +Author: Toni Gundogdu +Date: 2012-07-23 + + Add tests/verify.c + + Add a test for the quvi_verify_* function set. + +tests/Makefile.am +tests/verify.c + +commit 594414e +Author: Toni Gundogdu +Date: 2012-07-23 + + DOC: Add "Verification of an URL" and "Verifying an URL" + + Add "Verification of an URL" to the glossary (of terminology). + Add "Verifying an URL" page. Add a note to the quvi_verify_new + description about the accuracy of the file extension value. + +src/api/doxy/glossary_termino.dp +src/api/doxy/groups.dp +src/api/doxy/main.dp +src/api/doxy/verify_url.dp +src/api/verify_new.c + +commit 5ab05c2 +Author: Toni Gundogdu +Date: 2012-07-23 + + Remove "verify media stream URL" feature + + The library will no longer return the content-length or the + content-type (or its derivate: file extension) values along + with the media properties. This was done by sending an HTTP + HEAD request to the server and parsing the values in question + from the reply metadata. + + This saves bandwidth, and allows extending the media scripts to + return all available media stream URLs (e.g. with >1 formats) + to the library. + + Applications that need this, may do so with the media stream URL + they choose to use using the quvi_verify_* function set or use a + different solution altogether. This patch adds the quvi_verify_* + function set. + +src/Makefile.am +src/_quvi_media_s.h +src/_quvi_s.h +src/_quvi_verify_s.h +src/api/Makefile.am +src/api/media_get.c +src/api/new.c +src/api/set.c +src/api/verify_free.c +src/api/verify_get.c +src/api/verify_new.c +src/lua/util/exec_util_to_file_ext.c +src/misc/match_media_script.c +src/misc/media.c +src/net/Makefile.am +src/net/verify.c +src/net/verify_media_stream.c +src/quvi-1.0/quvi.h +src/quvi-1.0/quvi/Makefile.am +src/quvi-1.0/quvi/qdef.h +src/quvi-1.0/quvi/qfunc.h +src/quvi-1.0/quvi/qmediaprop.h +src/quvi-1.0/quvi/qoption.h +src/quvi-1.0/quvi/qverifyprop.h +tests/media.c + +commit 5a5ec4a +Author: Toni Gundogdu +Date: 2012-07-29 + + FIX: enum QuviInfo values + + QUVI_INFO_ERROR_CODE value was set incorrectly. QUVI_INFO_CURL_HANDLE + was using QUVI_INFO_RESPONSE_CODE, not QUVI_INFO_TYPE_LONG as it should + have. + +src/quvi-1.0/quvi/qinfo.h + +commit b2ae64d +Author: Toni Gundogdu +Date: 2012-07-23 + + examples: Remove include curl.h + +examples/media.c +examples/playlist.c +examples/query_fmts.c +examples/resolve.c +examples/scan.c +examples/supports.c + +commit 3c03e14 +Author: Toni Gundogdu +Date: 2012-07-23 + + examples/lib: Rewrite verify status callback + +examples/lib/status.c + +commit b62cddf +Author: Toni Gundogdu +Date: 2012-07-22 + + FIX: tests/media.c: expected title + +tests/media.c + +commit a516ed3 +Author: Toni Gundogdu +Date: 2012-07-19 + + DOC: Revise QUVI_OPTION_MEDIA_SCRIPT_PROTOCOL_CATEGORY comment + +src/quvi-1.0/quvi/qoption.h + +commit 1d3764a +Author: Toni Gundogdu +Date: 2012-07-19 + + DOC: glossary_termino.dp: Add "Protocol category" + +src/api/doxy/glossary_termino.dp + +commit 0846450 +Author: Toni Gundogdu +Date: 2012-07-19 + + DOC: Add proxy_support.dp + +src/api/Makefile.am +src/api/doxy/main.dp +src/api/doxy/proxy_support.dp + +commit e78ee4b +Author: Toni Gundogdu +Date: 2012-07-19 + + DOC: env.dp: Revise LIBQUVI_VERBOSE_SCRIPT + +src/api/doxy/env.dp + +commit 1e1d9f6 +Author: Toni Gundogdu +Date: 2012-07-19 + + DOC: Revise QUVI_OPTION_AUTOPROXY comment + +src/quvi-1.0/quvi/qoption.h + +commit e6ea49e +Author: Toni Gundogdu +Date: 2012-07-18 + + DOC: getting_started.dp: Add 'compiling applications on UNIX' + +src/api/doxy/getting_started.dp + +commit f4f9f90 +Author: Toni Gundogdu +Date: 2012-07-20 + + DOC: quvi_supports: Use @ref sh_url + +src/api/supports.c + +commit e2eabc5 +Author: Toni Gundogdu +Date: 2012-07-20 + + DOC: getting_started.dp: Revise + +src/api/doxy/getting_started.dp + +commit f225c3e +Author: Toni Gundogdu +Date: 2012-07-20 + + DOC: chk_supports.dp: Revise + +src/api/doxy/chk_support.dp + +commit 7d3ea98 +Author: Toni Gundogdu +Date: 2012-07-20 + + DOC: query_formats.dp: Revise + +src/api/doxy/query_formats.dp + +commit f17b6b7 +Author: Toni Gundogdu +Date: 2012-07-20 + + DOC: scripts.dp: Revise @sa tags list + +src/api/doxy/scripts.dp + +commit 3041ae8 +Author: Toni Gundogdu +Date: 2012-07-20 + + DOC: glossary_termino.dp: Revise + +src/api/doxy/glossary_termino.dp + +commit b4fec98 +Author: Toni Gundogdu +Date: 2012-07-20 + + DOC: parse_playlist.dp: Add playlist collection note + +src/api/doxy/parse_playlist.dp + +commit 49b8c88 +Author: Toni Gundogdu +Date: 2012-07-20 + + DOC: scan_media.dp: Revise + +src/api/doxy/scan_media.dp + +commit 9c509d2 +Author: Toni Gundogdu +Date: 2012-07-20 + + DOC: parse_media.dp: Revise + +src/api/doxy/parse_media.dp + +commit cd5d259 +Author: Toni Gundogdu +Date: 2012-07-20 + + DOC: main.dp: Add new @li tag + +src/api/doxy/main.dp + +commit 110e234 +Author: Toni Gundogdu +Date: 2012-07-20 + + DOC: env.dp: Remove @sa tags + +src/api/doxy/env.dp + +commit 1c655c1 +Author: Toni Gundogdu +Date: 2012-07-20 + + DOC: glossary_scripts.dp: Add "Script property" + +src/api/doxy/glossary_scripts.dp + +commit 3207413 +Author: Toni Gundogdu +Date: 2012-07-20 + + DOC: Revise QUVI_SCRIPT_PROPERTY_DOMAINS comment + +src/quvi-1.0/quvi/qscript.h + +commit 02ca290 +Author: Toni Gundogdu +Date: 2012-07-10 + + Add content-length sanity check + +src/net/verify_media_stream.c +src/quvi-1.0/quvi/qerror.h + +commit dccb6fd +Author: Toni Gundogdu +Date: 2012-07-08 + + Add new testsuite + +.gitignore +Makefile.am +configure.ac +src/api/script_next.c +tests/Makefile.am +tests/find_tests.sh +tests/goto.c +tests/lib/Makefile.am +tests/lib/env.c +tests/lib/qerr.c +tests/lib/tests.h +tests/media.c +tests/playlist.c +tests/query_fmts.c +tests/quvi.c +tests/resolve.c +tests/run_tests.sh +tests/scan.c +tests/script.c +tests/supports.c + +commit 62c4a43 +Author: Toni Gundogdu +Date: 2012-07-09 + + net/verify_media_stream.c: Rewrite with style changes + +src/net/verify_media_stream.c + +commit cb67e8a +Author: Toni Gundogdu +Date: 2012-07-09 + + net/fetch.c: Rewrite with style changes + +src/net/fetch.c + +commit 760d529 +Author: Toni Gundogdu +Date: 2012-07-09 + + misc/trim.c: Rewrite with style changes + +src/misc/trim.c + +commit caa10c6 +Author: Toni Gundogdu +Date: 2012-07-09 + + misc/scan_scripts.c: Rewrite with style changes + +src/misc/scan_scripts.c + +commit 37c347e +Author: Toni Gundogdu +Date: 2012-07-09 + + misc/match_playlist_script.c: Rewrite with style changes + +src/misc/match_playlist_script.c + +commit 9ee14f9 +Author: Toni Gundogdu +Date: 2012-07-09 + + misc/match_media_script.c: Rewrite with style changes + +src/misc/match_media_script.c + +commit 7093d86 +Author: Toni Gundogdu +Date: 2012-07-09 + + misc/match.c: Rewrite with style changes + +src/misc/match.c + +commit 58e024c +Author: Toni Gundogdu +Date: 2012-07-09 + + misc/capture.c: Rewrite with style changes + +src/misc/capture.c + +commit 1ac5f7a +Author: Toni Gundogdu +Date: 2012-07-09 + + lua/util/exec_util_to_file_ext.c: Rewrite with style changes + +src/lua/util/exec_util_to_file_ext.c + +commit 950bf93 +Author: Toni Gundogdu +Date: 2012-07-09 + + lua/util/exec_util_convert_entities.c: Rewrite with style changes + +src/lua/util/exec_util_convert_entities.c + +commit 21d8c00 +Author: Toni Gundogdu +Date: 2012-07-09 + + lua/quvi/fetch.c: Rewrite with style changes + +src/lua/quvi/fetch.c + +commit 93d9fef +Author: Toni Gundogdu +Date: 2012-07-09 + + lua/match_url_to_playlist_script.c: Rewrite with style changes + +src/lua/match_url_to_playlist_script.c + +commit 6efe0f6 +Author: Toni Gundogdu +Date: 2012-07-09 + + lua/match_url_to_media_script.c: Rewrite with style changes + +src/lua/match_url_to_media_script.c + +commit acc927d +Author: Toni Gundogdu +Date: 2012-07-09 + + lua/load_util_script.c: Rewrite with style changes + +src/lua/load_util_script.c + +commit b2a8678 +Author: Toni Gundogdu +Date: 2012-07-09 + + lua/exec_scan_script_parse.c: Rewrite with style changes + +src/lua/exec_scan_script_parse.c + +commit f136c06 +Author: Toni Gundogdu +Date: 2012-07-09 + + src/lua/exec_playlist_script_parse.c: Rewrite with style changes + +src/lua/exec_playlist_script_parse.c + +commit 1536561 +Author: Toni Gundogdu +Date: 2012-07-09 + + src/lua/exec_playlist_script_ident.c: Rewrite with style changes + +src/lua/exec_playlist_script_ident.c + +commit edf885b +Author: Toni Gundogdu +Date: 2012-07-09 + + lua/exec_media_script_query_formats.c: Rewrite with style changes + +src/lua/exec_media_script_query_formats.c + +commit 4d74988 +Author: Toni Gundogdu +Date: 2012-07-09 + + lua/exec_media_script_parse.c: Rewrite with style changes + +src/lua/exec_media_script_parse.c + +commit 3650ed5 +Author: Toni Gundogdu +Date: 2012-07-09 + + lua/exec_media_script_ident.c: Rewrite with style changes + +src/lua/exec_media_script_ident.c + +commit 6efd50b +Author: Toni Gundogdu +Date: 2012-07-09 + + curl/temp.c: rm whitespace + +src/curl/temp.c + +commit b89230c +Author: Toni Gundogdu +Date: 2012-07-09 + + curl/fetch.c: rm whitespace + +src/curl/fetch.c + +commit 1091678 +Author: Toni Gundogdu +Date: 2012-07-09 + + api/media_get.c: rm whitespace + +src/api/media_get.c + +commit 1c279b7 +Author: Toni Gundogdu +Date: 2012-07-09 + + curl/verify.c: Rewrite with style changes + +src/curl/verify.c + +commit 155f58f +Author: Toni Gundogdu +Date: 2012-07-09 + + curl/temp.c: Rewrite with style changes + +src/curl/temp.c + +commit 9ad788a +Author: Toni Gundogdu +Date: 2012-07-09 + + curl/resolve.c: Rewrite with style changes + +src/curl/resolve.c + +commit d2c818e +Author: Toni Gundogdu +Date: 2012-07-09 + + curl/fetch.c: Rewrite with style changes + +src/curl/fetch.c + +commit f7b7ab9 +Author: Toni Gundogdu +Date: 2012-07-09 + + quvi_version: Sanitize libquvi-scripts version string + +src/api/version.c + +commit 5e6e86c +Author: Toni Gundogdu +Date: 2012-07-09 + + api/supports.c: Rewrite with style changes + +src/api/supports.c + +commit 3bc37a0 +Author: Toni Gundogdu +Date: 2012-07-09 + + api/set.c: Rewrite with style changes + +src/api/set.c + +commit b3feb47 +Author: Toni Gundogdu +Date: 2012-07-09 + + api/script_next.c: Rewrite with style changes + +src/api/script_next.c + +commit d8936f4 +Author: Toni Gundogdu +Date: 2012-07-09 + + api/script_get.c: Rewrite with style changes + +src/api/script_get.c + +commit 5e81484 +Author: Toni Gundogdu +Date: 2012-07-09 + + api/resolve_new.c: Rewrite with style changes + +src/api/resolve_new.c + +commit ed84c0a +Author: Toni Gundogdu +Date: 2012-07-09 + + DOC: Tweak doxy comments for quvi*_new functions + +src/api/media_new.c +src/api/new.c +src/api/playlist_new.c +src/api/query_formats_new.c +src/api/resolve_new.c +src/api/scan_new.c + +commit e347ba1 +Author: Toni Gundogdu +Date: 2012-07-09 + + api/query_formats_new.c: Rewrite with style changes + +src/api/query_formats_new.c + +commit 7592484 +Author: Toni Gundogdu +Date: 2012-07-09 + + Check "handle" variable instead + +src/api/query_formats_free.c + +commit 30ab540 +Author: Toni Gundogdu +Date: 2012-07-09 + + api/playlist_new.c: Rewrite with style changes + +src/api/playlist_new.c + +commit 41f2205 +Author: Toni Gundogdu +Date: 2012-07-09 + + api/playlist_get.c: Rewrite with style changes + +src/api/playlist_get.c + +commit 4017a4a +Author: Toni Gundogdu +Date: 2012-07-09 + + api/media_new.c: Rewrite with style changes + +src/api/media_new.c + +commit 9a6df3c +Author: Toni Gundogdu +Date: 2012-07-09 + + api/media_get.c: Rewrite with style changes + +src/api/media_get.c + +commit d7991c7 +Author: Toni Gundogdu +Date: 2012-07-09 + + api/get.c: Rewrite with style changes + +src/api/get.c + +commit c4dd4ec +Author: Toni Gundogdu +Date: 2012-07-09 + + lua/util/exec_util_resolve_redirections.c: Rewrite with style changes + +src/lua/util/exec_util_resolve_redirections.c + +commit 31a6f00 +Author: Toni Gundogdu +Date: 2012-07-09 + + lua/quvi/resolve.c: Rewrite with style changes + +src/lua/quvi/resolve.c + +commit 70c1ab0 +Author: Toni Gundogdu +Date: 2012-07-09 + + api/errmsg.c: Rewrite with style changes + +src/api/errmsg.c + +commit 664176e +Author: Toni Gundogdu +Date: 2012-07-09 + + examples/query_fmts.c: Make minor style changes + +examples/query_fmts.c + +commit 969cb7b +Author: Toni Gundogdu +Date: 2012-07-09 + + autogen.sh: rmdir config.aux + +autogen.sh + +commit dbc7c83 +Author: Toni Gundogdu +Date: 2012-07-08 + + DOC: Env. variables: Rewrite proxy section + +src/api/doxy/env.dp + +commit d54b316 +Author: Toni Gundogdu +Date: 2012-07-08 + + examples: Rename query_formats.c to query_fmts.c + +examples/Makefile.am +examples/query_fmts.c +examples/query_formats.c + +commit 7f4a92c +Author: Toni Gundogdu +Date: 2012-07-07 + + Add QUVI_OPTION_AUTOPROXY + +configure.ac +examples/lib/Makefile.am +examples/lib/enable_autoproxy.c +examples/lib/examples.h +examples/media.c +examples/playlist.c +examples/query_formats.c +examples/resolve.c +examples/scan.c +examples/supports.c +src/_quvi_s.h +src/api/Makefile.am +src/api/errmsg.c +src/api/free.c +src/api/new.c +src/api/set.c +src/curl/Makefile.am +src/curl/autoproxy.c +src/curl/autoproxy.h +src/curl/fetch.c +src/curl/resolve.c +src/curl/verify.c +src/net/Makefile.am +src/quvi-1.0/quvi/qerror.h +src/quvi-1.0/quvi/qoption.h + +commit 0da8ea0 +Author: Toni Gundogdu +Date: 2012-06-15 + + Add support for util/resolve_redirections.lua + + This script may make any additional changes to the resolved destination + URL before it is passed back to the library. + + An example of this are the YouTube URL t= parameters which would + otherwise be lost during the resolving process, as the g00gle servers + strip the parameter from the destination URL. + +src/api/resolve_new.c +src/api/scan_new.c +src/api/supports.c +src/curl/resolve.c +src/lua/Makefile.am +src/lua/def.h +src/lua/load_util_script.c +src/lua/load_util_script.h +src/lua/quvi/resolve.c +src/lua/util/exec_util_convert_entities.c +src/lua/util/exec_util_resolve_redirections.c +src/lua/util/exec_util_to_file_ext.c +src/misc/match_media_script.c +src/misc/match_playlist_script.c +src/misc/resolve.c +src/misc/resolve.h +src/net/resolve.c + +commit 6a26de4 +Author: Toni Gundogdu +Date: 2012-07-07 + + Replace g_str_has_prefix with g_uri_parse_scheme + +src/net/verify_media_stream.c + +commit 63d3e01 +Author: Toni Gundogdu +Date: 2012-07-07 + + rm QUVI_MEDIA_PROPERTY_URL from API + +src/api/media_get.c +src/quvi-1.0/quvi/qmediaprop.h + +commit 7248da0 +Author: Toni Gundogdu +Date: 2012-07-05 + + Replace quvi_query_formats_next_format + + Add quvi_query_formats_get, replacing the quvi_query_formats_next_format + function in the API. This leaves parsing of the comma-separated format + string array to the applications. + + This follows the addition of the "domains" value that media and playlist + scripts return, which also contains a comma-separated value. + +examples/query_formats.c +src/_quvi_query_formats_s.h +src/api/Makefile.am +src/api/doxy/query_formats.dp +src/api/query_formats_free.c +src/api/query_formats_get.c +src/api/query_formats_new.c +src/api/query_formats_next_format.c +src/quvi-1.0/quvi/qfunc.h + +commit 5899be9 +Author: Toni Gundogdu +Date: 2012-07-05 + + misc/trim.c: rm m_trim_lua_esc implementation + +src/misc/trim.c + +commit 2cc1dc4 +Author: Toni Gundogdu +Date: 2012-07-04 + + Revise examples/script.c: rm obsolete type chars + +examples/script.c + +commit a0e1e70 +Author: Toni Gundogdu +Date: 2012-07-04 + + Extend "domains" support to playlist scripts + +src/_quvi_script_s.h +src/api/playlist_free.c +src/api/script_get.c +src/lua/Makefile.am +src/lua/chk_accepts.c +src/lua/chk_accepts.h +src/lua/def.h +src/lua/exec_media_script_ident.c +src/lua/exec_playlist_script_ident.c +src/misc/Makefile.am +src/misc/match_playlist_script.c +src/misc/playlist.c +src/misc/playlist.h +src/misc/playlist_new.c +src/misc/playlist_new.h +src/misc/scan_scripts.c +src/misc/script_free.c + +commit f82b25e +Author: Toni Gundogdu +Date: 2012-07-03 + + Add "domains" property support to media scripts + + This patch adds support for the "domains" property value available to + media scripts. It replaces the 0.4 "domain" string which allowed + defining only one domain (Lua pattern). + + This patch also removes the "categories" media property that was parsed + from the media script. The value was trivial to applications. + +examples/script.c +src/_quvi_script_s.h +src/api/media_free.c +src/api/script_get.c +src/lua/def.h +src/lua/exec_media_script_ident.c +src/lua/getfield.c +src/misc/Makefile.am +src/misc/match_media_script.c +src/misc/media.c +src/misc/media.h +src/misc/media_new.c +src/misc/media_new.h +src/misc/scan_scripts.c +src/misc/script_free.c +src/quvi-1.0/quvi/qscript.h + +commit a638ce5 +Author: Toni Gundogdu +Date: 2012-06-29 + + rm "site", "domain" property support + +examples/script.c +src/_quvi_media_s.h +src/_quvi_script_s.h +src/api/doxy/scripts.dp +src/api/media_free.c +src/api/media_get.c +src/api/script_get.c +src/lua/def.h +src/lua/exec_media_script_parse.c +src/misc/media_new.c +src/misc/scan_scripts.c +src/misc/script_free.c +src/quvi-1.0/quvi/qmediaprop.h +src/quvi-1.0/quvi/qscript.h + +commit 4fb03ec +Author: Toni Gundogdu +Date: 2012-07-06 + + rm extra lua_pushnil, lua_setglobal calls + +src/lua/exec_media_script_ident.c +src/lua/exec_playlist_script_ident.c +src/lua/exec_scan_script_parse.c + +commit 011f475 +Author: Toni Gundogdu +Date: 2012-07-05 + + Add QUVI_VERSION_BUILD_TIME, rn QUVI_VERSION_BUILD + +configure.ac +examples/version.c +src/api/version.c +src/quvi-1.0/quvi/qversion.h + +commit 6d5542e +Author: Toni Gundogdu +Date: 2012-07-03 + + configure.ac: rm --with-examples + +configure.ac +examples/Makefile.am + +commit 0427977 +Author: Toni Gundogdu +Date: 2012-07-03 + + examples: Add convenience library + +.gitignore +configure.ac +examples/Makefile.am +examples/cleanup.c +examples/enable_verbose.c +examples/exit_if_error.c +examples/lib/Makefile.am +examples/lib/cleanup.c +examples/lib/enable_verbose.c +examples/lib/examples.h +examples/lib/exit_if_error.c +examples/lib/status.c +examples/lib/var.c +examples/media.c +examples/playlist.c +examples/query_formats.c +examples/resolve.c +examples/scan.c +examples/script.c +examples/status.c +examples/supports.c +examples/var.c + +commit 75a30a2 +Author: Toni Gundogdu +Date: 2012-07-01 + + Bump libcurl prereq. to 7.21 + +configure.ac + +commit 2890d5d +Author: Toni Gundogdu +Date: 2012-06-29 + + Change pattern for categories check + +src/misc/scan_scripts.c + +commit e508f1b +Author: Toni Gundogdu +Date: 2012-06-19 + + quvi_get: Default to QUVI_INFO_RESPONSE_CODE + +src/api/get.c + +commit 34b2aea +Author: Toni Gundogdu +Date: 2012-06-19 + + configure.ac: Replace AC_GNU_SOURCE + +configure.ac + +commit 16456c5 +Author: Toni Gundogdu +Date: 2012-06-17 + + DOC: Fine tune QUVI_ERROR_CALLBACK description + +src/quvi-1.0/quvi/qerror.h + +commit 87e821e +Author: Toni Gundogdu +Date: 2012-06-17 + + Add examples/enable_verbose.c + +examples/Makefile.am +examples/enable_verbose.c +examples/media.c +examples/playlist.c +examples/query_formats.c +examples/resolve.c +examples/scan.c +examples/supports.c + +commit fe8230b +Author: Toni Gundogdu +Date: 2012-06-16 + + FIX: query_formats_new: Check fmts != NULL + +src/api/query_formats_new.c + +commit e94c45a +Author: Toni Gundogdu +Date: 2012-06-16 + + examples/supports.c: Add -v option + +examples/supports.c + +commit 61a18f4 +Author: Toni Gundogdu +Date: 2012-06-16 + + FIX: examples/query_formats.c: Check url != NULL + +examples/query_formats.c + +commit cec3fed +Author: Toni Gundogdu +Date: 2012-06-16 + + FIX: examples/scan.c: Check url != NULL + +examples/scan.c + +commit ae15296 +Author: Toni Gundogdu +Date: 2012-06-16 + + FIX: examples/media.c: Check url != NULL + +examples/media.c + +commit 4da3ddd +Author: Toni Gundogdu +Date: 2012-06-16 + + examples/playlist.c: Add -v option + +examples/playlist.c + +commit 39496db +Author: Toni Gundogdu +Date: 2012-06-16 + + examples/query_formats.c: Add -v option + +examples/query_formats.c + +commit aba8911 +Author: Toni Gundogdu +Date: 2012-06-16 + + examples/scan.c: Add -v option + +examples/scan.c + +commit 4d83677 +Author: Toni Gundogdu +Date: 2012-06-13 + + Rename QUVI_MEDIA_PROPERTY_START_TIME + +src/_quvi_media_s.h +src/api/media_get.c +src/lua/def.h +src/lua/exec_media_script_parse.c +src/quvi-1.0/quvi/qmediaprop.h + +commit aa7772f +Author: Toni Gundogdu +Date: 2012-06-13 + + quvi_get: Do not set q->status.rc + + This interferes with QUVI_INFO_ERROR_CODE, + e.g. + long e = 0; + quvi_get(q, QUVI_INFO_ERROR_CODE, &e); + + e would now in fact hold QUVI_OK, not the original value. + +src/api/get.c + +commit 99891d0 +Author: Toni Gundogdu +Date: 2012-06-11 + + FIX: c_resolve: Do not override existing rc variable value + +src/curl/fetch.c +src/curl/resolve.c + +commit 75eb757 +Author: Toni Gundogdu +Date: 2012-06-11 + + FIX: c_resolve: Set rc=QUVI_OK + +src/curl/resolve.c + +commit e24b845 +Author: Toni Gundogdu +Date: 2012-06-11 + + examples/media.c: Add -v + +examples/media.c + +commit 6e9733e +Author: Toni Gundogdu +Date: 2012-06-11 + + examples/: setlocale + +examples/media.c +examples/playlist.c +examples/query_formats.c +examples/resolve.c +examples/scan.c +examples/script.c +examples/supports.c + +commit 51d973c +Author: Toni Gundogdu +Date: 2012-06-11 + + rm QUVI_OPTION_RESOLVE_URL_REDIRECTIONS + + Let libcurl automatically follow (up to 5 subsequent) URL redirections. + quvi_resolve_* function set may still be used to resolve URL redirections. + +src/_quvi_s.h +src/api/doxy/chk_support.dp +src/api/new.c +src/api/resolve_new.c +src/api/scan_new.c +src/api/set.c +src/api/supports.c +src/lua/quvi/resolve.c +src/misc/match_media_script.c +src/misc/match_playlist_script.c +src/misc/resolve.c +src/misc/resolve.h +src/net/resolve.c +src/net/resolve.h +src/quvi-1.0/quvi/qfunc.h +src/quvi-1.0/quvi/qoption.h + +commit 1c9c1ac +Author: Toni Gundogdu +Date: 2012-06-11 + + c_resolve: Rewrite URL redirection resolving + + Let libcurl take care of it all. + + Use CURLOPT_FOLLOWLOCATION (=1) and CURLOPT_MAXREDIRS (=5) + with CURLOPT_NOBODY (=1). Get redirection URL using the + CURLINFO_EFFECTIVE_URL, instead. + +src/curl/init.c +src/curl/resolve.c + +commit 7cacea1 +Author: Toni Gundogdu +Date: 2012-06-11 + + c_fetch: Reset cURL (WRITEDATA) options + +src/curl/fetch.c + +commit 442c2c4 +Author: Toni Gundogdu +Date: 2012-06-10 + + Add examples/resolve.c + +examples/Makefile.am +examples/cleanup.c +examples/exit_if_error.c +examples/resolve.c +examples/var.c +examples/version.c + +commit 4644e80 +Author: Toni Gundogdu +Date: 2012-06-10 + + resolve: Do not use WRITEDATA, use HEAD req. instead + +src/curl/resolve.c + +commit ee0799b +Author: Toni Gundogdu +Date: 2012-06-10 + + Use gint and gchar + +examples/media.c +examples/playlist.c +examples/query_formats.c +examples/scan.c +examples/script.c +examples/supports.c + +commit 96f80ef +Author: Toni Gundogdu +Date: 2012-06-09 + + Add CURLOPT_MAXREDIRS (commented out) + +src/curl/resolve.c + +commit 9358795 +Author: Toni Gundogdu +Date: 2012-06-08 + + Rename QUVI_MEDIA_PROPERTY_MEDIA_URL + +src/api/media_get.c +src/quvi-1.0/quvi/qmediaprop.h + +commit 650180c +Author: Toni Gundogdu +Date: 2012-06-08 + + Make start_time a numeric value + +src/_quvi_media_s.h +src/api/media_free.c +src/api/media_get.c +src/lua/exec_media_script_parse.c +src/misc/media_new.c +src/quvi-1.0/quvi/qmediaprop.h + +commit b9231f5 +Author: Toni Gundogdu +Date: 2012-06-05 + + configure.ac: Check for libquvi-scripts-1.0(.pc) instead + +configure.ac + +commit bd5b57b +Author: Toni Gundogdu +Date: 2012-06-04 + + qprotocat.h, qsupp.h: Use shift to define + +src/quvi-1.0/quvi/qprotocat.h +src/quvi-1.0/quvi/qsupp.h + +commit 88e5278 +Author: Toni Gundogdu +Date: 2012-05-25 + + Add a comment + +src/lua/util/exec_util_convert_entities.c + +commit 90f499f +Author: Toni Gundogdu +Date: 2012-05-23 + + n_verify_media_stream: Move up check for scheme + +src/net/verify_media_stream.c + +commit 3e0c4a7 +Author: Toni Gundogdu +Date: 2012-05-22 + + m_scan_scripts: Print reason for rejection + +src/misc/scan_scripts.c + +commit 6a28337 +Author: Toni Gundogdu +Date: 2012-05-22 + + Impl. goto_url support + +src/misc/match_media_script.c + +commit 8e8ef4e +Author: Toni Gundogdu +Date: 2012-05-21 + + configure.ac: Check for libquvi-scripts-1.0.pc + +configure.ac + +commit 1738517 +Author: Toni Gundogdu +Date: 2012-05-21 + + autogen.sh: Check pod + +autogen.sh + +commit 8b2d8a6 +Author: Toni Gundogdu +Date: 2012-05-21 + + scripts.dp: Remove sorting + +src/api/doxy/scripts.dp + +commit bdb991a +Author: Toni Gundogdu +Date: 2012-05-20 + + rm script sorting from API + + * Sort scripts alphabetically by filepath + +examples/script.c +src/_quvi_s.h +src/api/new.c +src/api/script_next.c +src/api/set.c +src/misc/Makefile.am +src/misc/scan_scripts.c +src/misc/sort.c +src/misc/sort.h +src/quvi-1.0/quvi/qoption.h +src/quvi-1.0/quvi/qscript.h + +commit 470e635 +Author: Toni Gundogdu +Date: 2012-05-20 + + Add config.aux/ar-lib to .gitignore + +.gitignore + +commit 0364310 +Author: Toni Gundogdu +Date: 2012-05-20 + + DOC: quvi_scan_new: Add resolve note + +src/api/scan_new.c + +commit a0a962d +Author: Toni Gundogdu +Date: 2012-05-20 + + m_sort_scripts: Default to filepath + +src/misc/sort.c + +commit 0d31d55 +Author: Toni Gundogdu +Date: 2012-05-20 + + Use default INSTALL file + +INSTALL + +commit fadf30e +Author: Toni Gundogdu +Date: 2012-05-20 + + configure.ac: Modernize automake, libtool options + +configure.ac + +commit 9afa375 +Author: Toni Gundogdu +Date: 2012-05-20 + + src/*/Makefile.am: Use *_LIBADD + +src/api/Makefile.am +src/curl/Makefile.am +src/lua/Makefile.am +src/misc/Makefile.am +src/net/Makefile.am + +commit b1529eb +Author: Toni Gundogdu +Date: 2012-05-20 + + src/Makefile.am: Use *_LIBADD + +src/Makefile.am + +commit a095b11 +Author: Toni Gundogdu +Date: 2012-05-20 + + examples/Makefile.am: Use *_LDADD + +examples/Makefile.am + +commit 7e3423b +Author: Toni Gundogdu +Date: 2012-05-19 + + Add config.aux/compile to .gitignore + +.gitignore + +commit dba84e4 +Author: Toni Gundogdu +Date: 2012-05-19 + + configure.ac: Add AM_PROG_CC_C_O, AM_PROG_AR + + * Leave AM_PROG_AR commented out + +configure.ac + +commit ffaca07 +Author: Toni Gundogdu +Date: 2012-05-19 + + Remove config.aux/config.rpath + +config.aux/config.rpath + +commit d1e8622 +Author: Toni Gundogdu +Date: 2012-05-19 + + Check strlen >0 with g_getenv returned values + +src/api/new.c +src/misc/scan_scripts.c + +commit b989f59 +Author: Toni Gundogdu +Date: 2012-05-17 + + Rewrite examples/script.c + + Add + * Sorting + * Mask + +examples/script.c + +commit 2be256a +Author: Toni Gundogdu +Date: 2012-05-17 + + Replace _quvi_util_script_s with _quvi_script_s + +src/Makefile.am +src/_quvi_util_script_s.h +src/api/free.c +src/lua/load_util_script.c +src/misc/scan_scripts.c +src/misc/script_free.c +src/misc/script_free.h + +commit 9ee3847 +Author: Toni Gundogdu +Date: 2012-05-17 + + Add a comment to _quvi_script_s + +src/_quvi_script_s.h + +commit 5d2e3e0 +Author: Toni Gundogdu +Date: 2012-05-17 + + Change defaults for script sorting + +src/api/new.c +src/quvi-1.0/quvi/qoption.h + +commit 6639c32 +Author: Toni Gundogdu +Date: 2012-05-17 + + examples/version.c: Include glib.h + +examples/version.c + +commit 7231412 +Author: Toni Gundogdu +Date: 2012-05-16 + + Rename examples/scripts.c + +examples/Makefile.am +examples/script.c +examples/scripts.c + +commit c51c21c +Author: Toni Gundogdu +Date: 2012-05-15 + + API: Use "const char*" instead + +src/api/media_new.c +src/api/playlist_new.c +src/api/query_formats_new.c +src/api/resolve_new.c +src/api/scan_new.c +src/api/supports.c +src/quvi-1.0/quvi/qfunc.h + +commit 551369f +Author: Toni Gundogdu +Date: 2012-05-08 + + Add new gitignore entry + +.gitignore + +commit 0b970ee +Author: Toni Gundogdu +Date: 2012-05-08 + + examples/Makefile.am: Add reusable CPF and LDF + +examples/Makefile.am + +commit ba04fd1 +Author: Toni Gundogdu +Date: 2012-05-08 + + Cleanup examples/*.c + +examples/media.c +examples/query_formats.c + +commit bfe2402 +Author: Toni Gundogdu +Date: 2012-05-08 + + examples/supports.c: Print unknown type warning + +examples/scripts.c + +commit 2a00b1b +Author: Toni Gundogdu +Date: 2012-05-08 + + configure.ac: Add --with-scriptsdir + +configure.ac + +commit 1ed31a9 +Author: Toni Gundogdu +Date: 2012-05-08 + + Rewrite target "doc" for doxygen + +Makefile.am +configure.ac +doc/Makefile.am +doc/dox/Doxyfile.in +doc/dox/Makefile.am + +commit 5c32fe4 +Author: Toni Gundogdu +Date: 2012-05-08 + + Add remaining doxygen pages + +src/api/Makefile.am +src/api/doxy/chk_support.dp +src/api/doxy/env.dp +src/api/doxy/getting_started.dp +src/api/doxy/glossary.dp +src/api/doxy/glossary_scripts.dp +src/api/doxy/glossary_termino.dp +src/api/doxy/groups.dp +src/api/doxy/main.dp +src/api/doxy/parse_media.dp +src/api/doxy/parse_playlist.dp +src/api/doxy/query_formats.dp +src/api/doxy/scan_media.dp +src/api/doxy/scripts.dp + +commit 074912b +Author: Toni Gundogdu +Date: 2012-05-08 + + Add examples/scan.c + +examples/Makefile.am +examples/cleanup.c +examples/scan.c +examples/var.c + +commit 2f04742 +Author: Toni Gundogdu +Date: 2012-05-08 + + Add quvi_scan_* + +src/Makefile.am +src/_quvi_scan_s.h +src/api/Makefile.am +src/api/scan_free.c +src/api/scan_new.c +src/api/scan_next_media_url.c +src/lua/Makefile.am +src/lua/exec_scan_script_parse.c +src/misc/Makefile.am +src/misc/scan_new.c +src/misc/scan_new.h + +commit 79eb4a5 +Author: Toni Gundogdu +Date: 2012-05-08 + + Add examples/version.c + +examples/Makefile.am +examples/version.c + +commit 884cd3c +Author: Toni Gundogdu +Date: 2012-05-08 + + Add quvi_version + +src/api/Makefile.am +src/api/version.c +src/quvi-1.0/quvi/qversion.h + +commit 10346d4 +Author: Toni Gundogdu +Date: 2012-05-08 + + examples: Add var.c + +examples/Makefile.am +examples/media.c +examples/playlist.c +examples/query_formats.c +examples/scripts.c +examples/supports.c +examples/var.c + +commit 8d45033 +Author: Toni Gundogdu +Date: 2012-05-07 + + examples/supports.c: Add -t + +examples/supports.c + +commit 50b214a +Author: Toni Gundogdu +Date: 2012-05-07 + + examples: Add status callback + +examples/Makefile.am +examples/media.c +examples/playlist.c +examples/query_formats.c +examples/status.c +examples/supports.c + +commit 72e5a70 +Author: Toni Gundogdu +Date: 2012-05-07 + + Add examples/playlist.c + +examples/Makefile.am +examples/cleanup.c +examples/exit_if_error.c +examples/media.c +examples/playlist.c +examples/query_formats.c +examples/scripts.c +examples/supports.c + +commit 09e28ea +Author: Toni Gundogdu +Date: 2012-05-07 + + Add examples/query_formats.c + +examples/Makefile.am +examples/cleanup.c +examples/exit_if_error.c +examples/media.c +examples/query_formats.c +examples/scripts.c +examples/supports.c + +commit d328fa4 +Author: Toni Gundogdu +Date: 2012-05-07 + + Add examples/scripts.c + +examples/Makefile.am +examples/scripts.c + +commit 630fed2 +Author: Toni Gundogdu +Date: 2012-05-07 + + Add quvi_script_* + +src/api/Makefile.am +src/api/script_get.c +src/api/script_next.c + +commit 13c1dad +Author: Toni Gundogdu +Date: 2012-05-07 + + Add examples/supports.c + +examples/Makefile.am +examples/supports.c +src/api/Makefile.am + +commit f85b3df +Author: Toni Gundogdu +Date: 2012-05-07 + + Add quvi_supports + +src/api/supports.c + +commit 1431dfa +Author: Toni Gundogdu +Date: 2012-05-07 + + AC_INIT: Change to short URLs + +configure.ac + +commit f361916 +Author: Toni Gundogdu +Date: 2012-05-06 + + Add examples/media.c + +examples/Makefile.am +examples/cleanup.c +examples/exit_if_error.c +examples/media.c + +commit 9f58088 +Author: Toni Gundogdu +Date: 2012-05-06 + + Add missing src/curl/, src/lua/, src/net/ files + + * Fixes the remaining undefined references + +src/curl/Makefile.am +src/curl/verify.c +src/lua/Makefile.am +src/lua/exec_media_script_ident.c +src/lua/exec_media_script_parse.c +src/lua/exec_media_script_query_formats.c +src/lua/exec_playlist_script_ident.c +src/lua/exec_playlist_script_parse.c +src/lua/load_util_script.c +src/lua/load_util_script.h +src/lua/match_url_to_media_script.c +src/lua/match_url_to_playlist_script.c +src/lua/setfield.c +src/lua/setfield.h +src/lua/util/exec_util_convert_entities.c +src/lua/util/exec_util_to_file_ext.c +src/net/Makefile.am +src/net/verify_media_stream.c + +commit 6eeba6f +Author: Toni Gundogdu +Date: 2012-05-06 + + Add quvi_errmsg + +src/api/Makefile.am +src/api/errmsg.c + +commit 073fabf +Author: Toni Gundogdu +Date: 2012-05-06 + + Add quvi_playlist_* + +src/Makefile.am +src/_quvi_playlist_s.h +src/api/Makefile.am +src/api/playlist_free.c +src/api/playlist_get.c +src/api/playlist_new.c +src/api/playlist_next_media_url.c +src/misc/Makefile.am +src/misc/match_playlist_script.c +src/misc/match_playlist_script.h +src/misc/playlist_new.c +src/misc/playlist_new.h + +commit fc5102c +Author: Toni Gundogdu +Date: 2012-05-06 + + src/Makefile.am: Add missing libconvenience_net.la + +src/Makefile.am + +commit 1bfb8be +Author: Toni Gundogdu +Date: 2012-05-06 + + rm old example *.c, *.h + +examples/common.c +examples/common.h +examples/parse.c +examples/simple.c +examples/supported.c +examples/version.c + +commit 4b37193 +Author: Toni Gundogdu +Date: 2012-05-06 + + Add quvi_query_formats_* + +src/Makefile.am +src/_quvi_query_formats_s.h +src/api/Makefile.am +src/api/query_formats_free.c +src/api/query_formats_new.c +src/api/query_formats_next_format.c + +commit f3dde36 +Author: Toni Gundogdu +Date: 2012-05-06 + + Add quvi_media_* + +src/api/Makefile.am +src/api/media_free.c +src/api/media_get.c +src/api/media_new.c +src/lua/Makefile.am +src/lua/exec.h +src/misc/Makefile.am +src/misc/match_media_script.c +src/misc/match_media_script.h +src/misc/media_new.c +src/misc/media_new.h + +commit a0c4936 +Author: Toni Gundogdu +Date: 2012-05-06 + + Use AC_CANONICAL_TARGET instead + + * Re-organize AC_MSG_NOTICE output + +configure.ac + +commit 1c82b80 +Author: Toni Gundogdu +Date: 2012-05-06 + + configure.ac: Update AC_CHECK_* + +configure.ac + +commit ed4d993 +Author: Toni Gundogdu +Date: 2012-05-06 + + Bump version to 0.9.0 and IF version C+1:0:0 + + * Breaks backward-compatibility with 0.4 + +m4/version.m4 + +commit aeabf45 +Author: Toni Gundogdu +Date: 2012-05-06 + + Rename m4 LT variables + +configure.ac +m4/version.m4 +src/Makefile.am + +commit c927f96 +Author: Toni Gundogdu +Date: 2012-05-06 + + Add quvi_get, quvi_get + +src/api/Makefile.am +src/api/get.c +src/api/set.c + +commit a35b88c +Author: Toni Gundogdu +Date: 2012-05-06 + + Rename libquvi.pc.in + + * Update Cflags and Libs + +Makefile.am +configure.ac +libquvi-1.0.pc.in +libquvi.pc.in + +commit 6db1899 +Author: Toni Gundogdu +Date: 2012-05-06 + + Update .gitignore + +.gitignore + +commit cd8379e +Author: Toni Gundogdu +Date: 2012-05-06 + + Update configure.ac + +configure.ac + +commit 0fb867d +Author: Toni Gundogdu +Date: 2012-05-06 + + Update top-level Makefile.am + +Makefile.am + +commit 7ece5f2 +Author: Toni Gundogdu +Date: 2012-05-06 + + Add src/Makefile.am + +src/Makefile.am + +commit dd69366 +Author: Toni Gundogdu +Date: 2012-05-06 + + Add _quvi_*.h + +src/_quvi_macro.h +src/_quvi_media_s.h +src/_quvi_net_opt_s.h +src/_quvi_net_resolve_s.h +src/_quvi_net_s.h +src/_quvi_s.h +src/_quvi_script_s.h +src/_quvi_util_script_s.h + +commit f25f384 +Author: Toni Gundogdu +Date: 2012-05-06 + + Add src/net/* + +src/net/Makefile.am +src/net/def.h +src/net/fetch.c +src/net/fetch.h +src/net/handle.c +src/net/handle.h +src/net/opt.c +src/net/opt.h +src/net/resolve.c +src/net/resolve.h + +commit afb15c7 +Author: Toni Gundogdu +Date: 2012-05-06 + + Add src/misc/* + +src/misc/Makefile.am +src/misc/capture.c +src/misc/match.c +src/misc/re.h +src/misc/resolve.c +src/misc/resolve.h +src/misc/scan_scripts.c +src/misc/script_free.c +src/misc/script_free.h +src/misc/sort.c +src/misc/sort.h +src/misc/to_utf8.c +src/misc/trim.c + +commit 8338284 +Author: Toni Gundogdu +Date: 2012-05-06 + + Add src/lua/* + +src/lua/Makefile.am +src/lua/def.h +src/lua/getfield.c +src/lua/getfield.h +src/lua/init.c +src/lua/modify_pkgpath.c +src/lua/quvi/fetch.c +src/lua/quvi/resolve.c + +commit 211d215 +Author: Toni Gundogdu +Date: 2012-05-06 + + Add src/curl/* + +src/curl/Makefile.am +src/curl/close.c +src/curl/fetch.c +src/curl/init.c +src/curl/resolve.c +src/curl/temp.c +src/curl/temp.h + +commit a11ec8f +Author: Toni Gundogdu +Date: 2012-05-06 + + Add quvi_new, quvi_free, quvi_ok, quvi_resolve_* + +src/api/Makefile.am +src/api/free.c +src/api/new.c +src/api/ok.c +src/api/resolve_destination_url.c +src/api/resolve_forwarded.c +src/api/resolve_free.c +src/api/resolve_new.c + +commit 0173f0e +Author: Toni Gundogdu +Date: 2012-05-06 + + Add new libquvi headers + +src/quvi-1.0/Makefile.am +src/quvi-1.0/quvi.h +src/quvi-1.0/quvi/Makefile.am +src/quvi-1.0/quvi/qbool.h +src/quvi-1.0/quvi/qcallback.h +src/quvi-1.0/quvi/qdef.h +src/quvi-1.0/quvi/qerror.h +src/quvi-1.0/quvi/qfunc.h +src/quvi-1.0/quvi/qinfo.h +src/quvi-1.0/quvi/qmediaprop.h +src/quvi-1.0/quvi/qoption.h +src/quvi-1.0/quvi/qplaylistprop.h +src/quvi-1.0/quvi/qprotocat.h +src/quvi-1.0/quvi/qscript.h +src/quvi-1.0/quvi/qsupp.h +src/quvi-1.0/quvi/qversion.h + +commit 069bcd8 +Author: Toni Gundogdu +Date: 2012-05-05 + + examples/Makefile.am: clear + +examples/Makefile.am + +commit 5813c6a +Author: Toni Gundogdu +Date: 2012-05-05 + + doc/Makefile.am: rm nd + +doc/Makefile.am + +commit bc081d5 +Author: Toni Gundogdu +Date: 2012-05-05 + + .gitignore: rm src/libquvi/* + +.gitignore + +commit b339eac +Author: Toni Gundogdu +Date: 2012-05-05 + + src/Makefile.am: rm SUBDIRS=libquvi + +src/Makefile.am + +commit a3912bc +Author: Toni Gundogdu +Date: 2012-05-05 + + configure.ac: rm src/libquvi/Makefile + +configure.ac + +commit ed1a434 +Author: Toni Gundogdu +Date: 2012-05-05 + + Makefile.am: rm unused HAVE_DOXYGEN block + +Makefile.am + +commit a568998 +Author: Toni Gundogdu +Date: 2012-05-05 + + configure.ac: rm (v)asprintf check + +configure.ac + +commit ed2e928 +Author: Toni Gundogdu +Date: 2012-05-05 + + examples/: rm callback_libsoup.c + +examples/Makefile.am +examples/callback_libsoup.c + +commit c60e600 +Author: Toni Gundogdu +Date: 2012-05-05 + + configure.ac: rm libsoup check + +configure.ac + +commit 198a085 +Author: Toni Gundogdu +Date: 2012-05-05 + + Makefile.am: doc: rm ND generation + +Makefile.am + +commit 98521a0 +Author: Toni Gundogdu +Date: 2012-05-05 + + configure.ac: rm ND check + +configure.ac + +commit 164b792 +Author: Toni Gundogdu +Date: 2012-05-05 + + Remove doc/nd/* + +doc/nd/About.txt +doc/nd/Help/Development.txt +doc/nd/Help/Help.txt +doc/nd/Help/Patches.txt +doc/nd/Help/Style.txt +doc/nd/Overviews/Formats.txt +doc/nd/Overviews/Overview.txt +doc/nd/Overviews/Overview_LinkedList.txt +doc/nd/Overviews/Overview_Network.txt +doc/nd/Webscripts/Guidelines.txt +doc/nd/Webscripts/Tutorial.txt +doc/nd/Webscripts/Webscript.txt + +commit f31f4db +Author: Toni Gundogdu +Date: 2012-05-05 + + configure.ac: Add glib check, rm AM_ICONV check + +configure.ac + +commit 3937e4b +Author: Toni Gundogdu +Date: 2012-05-05 + + Remove old *.c and *.h + +configure.ac +src/libquvi/Makefile.am +src/libquvi/asprintf.c +src/libquvi/curl_wrap.c +src/libquvi/curl_wrap.h +src/libquvi/depr_api.c +src/libquvi/internal.h +src/libquvi/llst_api.c +src/libquvi/lua_wrap.c +src/libquvi/lua_wrap.h +src/libquvi/net_api.c +src/libquvi/net_wrap.c +src/libquvi/net_wrap.h +src/libquvi/platform.h +src/libquvi/quvi/Makefile.am +src/libquvi/quvi/llst.h +src/libquvi/quvi/net.h +src/libquvi/quvi/quvi.h +src/libquvi/quvi_api.c +src/libquvi/strepl.c +src/libquvi/util.c +src/libquvi/util.h +src/libquvi/vasprintf.c + +commit b05d1ac +Author: Toni Gundogdu +Date: 2012-03-30 + + Lower AC_PREREQ to 2.67 + +configure.ac + +commit 287aa40 +Author: Toni Gundogdu +Date: 2012-03-27 + + gen-news.sh: Add stat + +gen-news.sh + +commit dd471b6 +Author: Toni Gundogdu +Date: 2012-03-23 + + Update NEWS for v0.4.1 + +NEWS + +commit 0d0e8ee +Author: Toni Gundogdu +Date: 2012-03-23 + + Bump version to 0.4.1 + + * Bump interface C:R+1:A + +m4/version.m4 + +commit 6de7322 +Author: Toni Gundogdu +Date: 2012-03-18 + + FIX: Lua 5.2: Use luaL_newstate instead (#89) + + "lua_open was removed in 5.1, and apparently really removed in 5.2 + luaL_newstate replaces it, and as libquvi already depends on Lua 5.1 + just unconditionally replacing the call should work." -- marienz + + * http://sourceforge.net/apps/trac/quvi/ticket/89 + +src/libquvi/lua_wrap.c + +commit b2f1621 +Author: Toni Gundogdu +Date: 2011-11-30 + + FIX: Use dirname(3) properly + + dirname(3) returned pointers to null-terminated strings must + not be passed to free(3). dirname(3) may modify the contents. + Preserve the pathname by using a temporary copy with dirname(3). + +src/libquvi/lua_wrap.c +src/libquvi/util.c +src/libquvi/util.h + +commit 0c4ff3b +Author: Toni Gundogdu +Date: 2012-03-18 + + FIX: Make verify c/b check against correct option + + Check that the verify callback was set, not the resolve callback. + +src/libquvi/net_wrap.c + +commit 179d997 +Author: Toni Gundogdu +Date: 2011-11-30 + + Add examples/supported.c + +examples/Makefile.am +examples/supported.c + +commit a26f5f6 +Author: Toni Gundogdu +Date: 2011-11-30 + + Add examples/parse.c + +examples/Makefile.am +examples/parse.c + +commit 41ead47 +Author: Toni Gundogdu +Date: 2012-02-29 + + Add gen-new.sh (repo only) + +gen-news.sh + +commit be85ead +Author: Toni Gundogdu +Date: 2012-02-29 + + Add license to misc. scripts + + * autogen.sh + * gen-ver.sh + +autogen.sh +gen-ver.sh + +commit 3d2e015 +Author: Toni Gundogdu +Date: 2012-02-29 + + DOC: Replace buzzhumor with gaskrank + + * buzzhumor.lua was removed in libquvi-scripts 0.4.3 + +doc/nd/Webscripts/Tutorial.txt + +commit 965afaf +Author: Toni Gundogdu +Date: 2011-10-05 + + Update NEWS for 0.4.0 + +NEWS + +commit 32a05a4 +Author: Toni Gundogdu +Date: 2011-09-22 + + Use empty string instead of "no" + +configure.ac + +commit 85b2d9a +Author: Toni Gundogdu +Date: 2011-09-16 + + Split from git://repo.or.cz/quvi.git + +.gitignore +AUTHORS +COPYING +INSTALL +Makefile.am +README +autogen.sh +config.aux/config.rpath +configure.ac +doc/Makefile.am +doc/man3/Makefile.am +doc/man3/libquvi.3.pod +doc/nd/About.txt +doc/nd/Help/Development.txt +doc/nd/Help/Help.txt +doc/nd/Help/Patches.txt +doc/nd/Help/Style.txt +doc/nd/Overviews/Formats.txt +doc/nd/Overviews/Overview.txt +doc/nd/Overviews/Overview_LinkedList.txt +doc/nd/Overviews/Overview_Network.txt +doc/nd/Webscripts/Guidelines.txt +doc/nd/Webscripts/Tutorial.txt +doc/nd/Webscripts/Webscript.txt +examples/Makefile.am +examples/callback_libsoup.c +examples/common.c +examples/common.h +examples/simple.c +examples/version.c +gen-ver.sh +libquvi.pc.in +m4/version.m4 +src/Makefile.am +src/libquvi/Makefile.am +src/libquvi/asprintf.c +src/libquvi/curl_wrap.c +src/libquvi/curl_wrap.h +src/libquvi/depr_api.c +src/libquvi/internal.h +src/libquvi/llst_api.c +src/libquvi/lua_wrap.c +src/libquvi/lua_wrap.h +src/libquvi/net_api.c +src/libquvi/net_wrap.c +src/libquvi/net_wrap.h +src/libquvi/platform.h +src/libquvi/quvi/Makefile.am +src/libquvi/quvi/llst.h +src/libquvi/quvi/net.h +src/libquvi/quvi/quvi.h +src/libquvi/quvi_api.c +src/libquvi/strepl.c +src/libquvi/util.c +src/libquvi/util.h +src/libquvi/vasprintf.c diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..a1e89e1 --- /dev/null +++ b/INSTALL @@ -0,0 +1,370 @@ +Installation Instructions +************************* + +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. + + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. + +Basic Installation +================== + + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. Caching is +disabled by default to prevent problems with accidental use of stale +cache files. + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. + + The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. + + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package, generally using the just-built uninstalled binaries. + + 4. Type `make install' to install the programs and any data files and + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. + +Installation Names +================== + + By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS + KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: + + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..c05fa39 --- /dev/null +++ b/Makefile.am @@ -0,0 +1,47 @@ +ACLOCAL_AMFLAGS=-I m4 +EXTRA_DIST=libquvi-0.9.pc.in gen-ver.sh VERSION + +pkgconfigdir= $(libdir)/pkgconfig +pkgconfig_DATA= libquvi-0.9.pc + +SUBDIRS=po src examples doc tests + +.PHONY: doc distdoc distdoc-html distdoc-latex distdoc-pdf ChangeLog VERSION test test-mem + +check: test + +test: all + @(cd tests ; $(MAKE) test) + +test-mem: all + @(cd tests ; $(MAKE) test-mem) + +doc: + @make -C $(top_builddir)/doc/dox/ doc + @make -C $(top_builddir)/doc/man3/ doc + @make -C $(top_builddir)/doc/man7/ doc + +distdoc-html: + @make -C $(top_builddir)/doc/dox/ distdoc-html + +distdoc-latex: + @make -C $(top_builddir)/doc/dox/ distdoc-latex + +distdoc-pdf: + @make -C $(top_builddir)/doc/dox/ distdoc-pdf + +distdoc: distdoc-html distdoc-latex distdoc-pdf + +VERSION: + @if test -d "$(top_srcdir)/.git" -o -f "$(top_srcdir)/.git"; then \ + "$(top_srcdir)/gen-ver.sh" "$(top_srcdir)" > $@; \ + fi + +ChangeLog: + @if test -d "$(top_srcdir)/.git" -o -f "$(top_srcdir)/.git"; then \ + git log --stat --name-only --date=short --abbrev-commit > $@; \ + fi + +dist-hook: ChangeLog VERSION + +# vim: set ts=2 sw=2 tw=72 expandtab: diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..64def9b --- /dev/null +++ b/Makefile.in @@ -0,0 +1,929 @@ +# Makefile.in generated by automake 1.11.6 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +subdir = . +DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(srcdir)/libquvi-0.9.pc.in $(top_srcdir)/configure \ + $(top_srcdir)/src/api/doxy/main.dp.in ABOUT-NLS AUTHORS \ + COPYING ChangeLog INSTALL NEWS config.aux/ar-lib \ + config.aux/compile config.aux/config.guess \ + config.aux/config.rpath config.aux/config.sub \ + config.aux/depcomp config.aux/install-sh config.aux/ltmain.sh \ + config.aux/missing +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/version.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = src/api/doxy/main.dp libquvi-0.9.pc +CONFIG_CLEAN_VPATH_FILES = +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(pkgconfigdir)" +DATA = $(pkgconfig_DATA) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir dist dist-all distcheck +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +GZIP_ENV = --best +DIST_ARCHIVES = $(distdir).tar.xz +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print +A2X = @A2X@ +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BUILD_TIME = @BUILD_TIME@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DATE = @DATE@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DOXYGEN = @DOXYGEN@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_AGE = @LT_AGE@ +LT_CUR = @LT_CUR@ +LT_REV = @LT_REV@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VALGRIND = @VALGRIND@ +VERSION = @VERSION@ +VN_C = @VN_C@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +glib_CFLAGS = @glib_CFLAGS@ +glib_LIBS = @glib_LIBS@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libcurl_CFLAGS = @libcurl_CFLAGS@ +libcurl_LIBS = @libcurl_LIBS@ +libdir = @libdir@ +libexecdir = @libexecdir@ +liblua_CFLAGS = @liblua_CFLAGS@ +liblua_LIBS = @liblua_LIBS@ +libproxy_CFLAGS = @libproxy_CFLAGS@ +libproxy_LIBS = @libproxy_LIBS@ +libquvi_scripts_CFLAGS = @libquvi_scripts_CFLAGS@ +libquvi_scripts_LIBS = @libquvi_scripts_LIBS@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +ACLOCAL_AMFLAGS = -I m4 +EXTRA_DIST = libquvi-0.9.pc.in gen-ver.sh VERSION +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = libquvi-0.9.pc +SUBDIRS = po src examples doc tests +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +config.h: stamp-h1 + @if test ! -f $@; then rm -f stamp-h1; else :; fi + @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +src/api/doxy/main.dp: $(top_builddir)/config.status $(top_srcdir)/src/api/doxy/main.dp.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +libquvi-0.9.pc: $(top_builddir)/config.status $(srcdir)/libquvi-0.9.pc.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt +install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ + done + +uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-hook + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__remove_distdir) + +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod u+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile $(DATA) config.h +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr \ + distclean-libtool distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: install-pkgconfigDATA + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-pkgconfigDATA + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ + ctags-recursive install-am install-strip tags-recursive + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am am--refresh check check-am clean clean-generic \ + clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ + dist-gzip dist-hook dist-lzip dist-lzma dist-shar dist-tarZ \ + dist-xz dist-zip distcheck distclean distclean-generic \ + distclean-hdr distclean-libtool distclean-tags distcleancheck \ + distdir distuninstallcheck dvi dvi-am html html-am info \ + info-am install install-am install-data install-data-am \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-pkgconfigDATA \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am uninstall-pkgconfigDATA + + +.PHONY: doc distdoc distdoc-html distdoc-latex distdoc-pdf ChangeLog VERSION test test-mem + +check: test + +test: all + @(cd tests ; $(MAKE) test) + +test-mem: all + @(cd tests ; $(MAKE) test-mem) + +doc: + @make -C $(top_builddir)/doc/dox/ doc + @make -C $(top_builddir)/doc/man3/ doc + @make -C $(top_builddir)/doc/man7/ doc + +distdoc-html: + @make -C $(top_builddir)/doc/dox/ distdoc-html + +distdoc-latex: + @make -C $(top_builddir)/doc/dox/ distdoc-latex + +distdoc-pdf: + @make -C $(top_builddir)/doc/dox/ distdoc-pdf + +distdoc: distdoc-html distdoc-latex distdoc-pdf + +VERSION: + @if test -d "$(top_srcdir)/.git" -o -f "$(top_srcdir)/.git"; then \ + "$(top_srcdir)/gen-ver.sh" "$(top_srcdir)" > $@; \ + fi + +ChangeLog: + @if test -d "$(top_srcdir)/.git" -o -f "$(top_srcdir)/.git"; then \ + git log --stat --name-only --date=short --abbrev-commit > $@; \ + fi + +dist-hook: ChangeLog VERSION + +# vim: set ts=2 sw=2 tw=72 expandtab: + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/NEWS b/NEWS new file mode 100644 index 0000000..cdbbe48 --- /dev/null +++ b/NEWS @@ -0,0 +1,75 @@ +v0.9.4 [2013-11-10] + +Toni Gundogdu: + - API: Return URLs in escaped (percent-encoded) form [b79b467] + - FIX: m_url_unescaped_form: Check if g_uri_unescape_string fails [8e23664] + + 23 files changed, 255 insertions(+), 145 deletions(-) + + +v0.9.3 [2013-09-03] + +Toni Gundogdu: + - AC_PREREQ: Bump to 2.69 [c591b1b] + - API: Add QUVI_OPTION_ALLOW_COOKIES [f56798b] + - API: Add QUVI_VERSION_SCRIPTS_CONFIGURATION [f0c95e0] + - API: quvi_version: Read "version" file as ini-file [4466c98] + - FIX: error: implicit declaration of function 'luaL_register' [f02cc3a] + - FIX: Unescape input URL before URL resolving [f2ce9b7] + - quvi.http.cookie: Return unless QUVI_OPTION_ALLOW_COOKIES is QUVI_TRUE [876949e] + + 50 files changed, 301 insertions(+), 171 deletions(-) + + +v0.9.2 [2013-07-16] + +Bastien Nocera: + - FIX: declaration of quvi_new() [91375fd] + - Require a2x when building from git [6cdebfd] +Toni Gundogdu: + - API: Add quvi_errcode [c9d1ca1] + - API: quvi_get: Remove QUVI_INFO_ERROR_CODE support [5f98b90] + - FIX: configure.ac: AS_IF for date(1) [cfc17fd] + - LDFLAGS: libtool: Use -release with unstable 0.9 releases [20b1ee3] + - quvi_set: Add support for QUVI_OPTION_CALLBACK_STATUS_USERDATA [587958b] + - quvi_version: Add support for QUVI_VERSION_BUILD_CC_CFLAGS [c93ce12] + - Redefine quvi_callback_status with userdata parameter [5b3cebb] + + 40 files changed, 317 insertions(+), 225 deletions(-) + + +v0.9.1 [2013-05-20] + +This is the first official release of the 0.9 of libquvi. The typical +list of the changes (commit-by-commit), since the 0.4, were omitted. + +For a detailed list of the changes, see the git commit log. For an +overview of the changes made in the quvi project 0.9+ series, see: + http://quvi.sourceforge.net/doc/other/quvi-prj-ptnine.html (WIP) + + +v0.4.1 (2012-03-23) / Toni Gundogdu + +Toni Gundogdu: + - Add examples/parse.c [a26f5f6] + - Add examples/supported.c [179d997] + - DOC: Replace buzzhumor with gaskrank [3d2e015] + - FIX: Lua 5.2: Use luaL_newstate instead (#89) [6de7322] + - Thanks to Marien Zwart for the fix + - FIX: Make verify c/b check against correct option [0c4ff3b] + - FIX: Use dirname(3) properly [b2f1621] + + +0.4.0 Wed Oct 05 2011 Toni Gundogdu + +Changes: + - Split from "quvi", new repo at + - Make QUVIPROTO_ALL new default (#43), this was previously QUVIPROTO_HTTP + - Rename env. variables, refer to documentation for new ones + - Remove deprecated API features (#42) + - See for "API: Deprecated" and "quvi.h" + - Remove the neglected symbol versioning + - Add QUVI_VERSION_SCRIPTS + +Fixes: + - Compilation errors with examples/Makefile.am diff --git a/README b/README new file mode 100644 index 0000000..540378b --- /dev/null +++ b/README @@ -0,0 +1,281 @@ +General +======= + +libquvi is a cross-platform library with C API for parsing +adobe flash media properties. + +gitweb: +Home : + + +Installation +============ + +Notes +----- + + * This document does not cover how to use GNU Autotools for building +and installing software, instead, refer to the GNU Autotools documentation, +the INSTALL file and the "configure --help" output for more information. + + * If you're not familiar with GNU Autotools and/or installing software +from the source code, you may prefer to install libquvi using a binary +package, instead. You can find libquvi packaged for many distros already. + + * If you have previously installed libquvi from the source code to your +system, the recommended practice is to uninstall the previous installation +first, before you continue with the new one. You would, typically, run +"make uninstall" (as root if necessary) from the same directory you ran +"make install" from. + + * If you are building libquvi from the git repository code, run the +`bootstrap.sh' first. This generates the configuration files. See also +the -h output for any additional info. + + +Simple install procedure +------------------------ + + % ./configure && make + + [ Become root if necessary ] + % make install + +The configure script supports also the following options which are +relevant to the installation: + + --with-scriptsdir=DIR (default:no) + + Look in DIR for libquvi-scripts. This negates the default check for + the libquvi-scripts package. DIR is presumed to contain similar + directory structure to the $prefix/share/libquvi-scripts/ directory + which is normally created by a typical libquvi-scripts installation. + + --with(out)-manual (default:yes) + + Install the manual page for libquvi. + + +Requirements +------------ + +* libquvi-scripts 0.9 + http://quvi.sourceforge.net/ + +* libcurl 7.21.0 + http://curl.haxx.se/ + $ sudo aptitude install libcurl4-gnutls-dev + (or libcurl4-openssl-dev) + +* GLib 2.24.2 + http://library.gnome.org/devel/glib/ + $ sudo aptitude install libglib2.0-dev + +* liblua 5.1 + http://lua.org/ + $ sudo aptitude install liblua5.1-0-dev + + 2013-06-04: (Debian, Wheezy) + At the time of writing this, the lua-socket (listed among the + libquvi-scripts prerequisites) package does not contain the + files for Lua 5.2, forcing the installation of liblua 5.1. + +* libproxy 0.3.1 + http://code.google.com/p/libproxy/ + $ sudo aptitude install libproxy-dev + +* libgcrypt 1.4.5 + http://directory.fsf.org/wiki/Libgcrypt + $ sudo aptitude install libgcrypt11-dev + +* pkg-config for tracking the compilation flags needed for libraries + http://www.freedesktop.org/software/pkgconfig/ + +* GNU gettext is recommended + http://www.gnu.org/software/gettext/ + +* GNU make is recommended + http://www.gnu.org/software/make/ + +* Doxygen for producing the C API reference documentation + http://www.stack.nl/~dimitri/doxygen/ + (to produce PDF: install LaTeX, e.g. TeX Live or teTeX, refer to + the Doxygen documentation for more information) + + See also "Documentation". + +* asciidoc (a2x) for producing the manual pages + http://www.methods.co.nz/asciidoc/ + + See also "Documentation". + + +Installation directories +------------------------ + +The location of the installed files is determined by the --prefix +and the --exec-prefix options given to the configure script. + +The .pc file for libquvi is installed in $exec_prefix/lib/pkgconfig to provide +information when compiling packages that depend on libquvi. + +If you set PKG_CONFIG_PATH so that it points to this directory, then you +can get the correct include and library flags for compiling a libquvi +application with: + + % pkg-config --cflags libquvi-0.9 + % pkg-config --libs libquvi-0.9 + + +Documentation +============= + +To build the documentation suite, you need to have the doxygen/asciidoc +-toolchain. Because not all users are inclined to install these tools, +the default build target does not build the documentation. See +"make doc" below for more information. + +The libquvi documentation is split into: + + - libquvi C API reference documentation + (generated by doxygen from the libquvi source code comments) + + The dist does NOT contain the libquvi C API reference documentation. + + Installation: The build suite does not currently install the C API + reference documentation. See "make doc" and "make distdoc" below. + + - libquvi manual pages + (generated by asciidoc, or a2x to be precise) + + Installation: The libquvi dist tarball contains prebuilt manual + pages, and are installed by default. See `--with(out)-manual' above. + See also "make doc" below. + +Make targets: + + 'make doc' builds the C API reference documentation from the doxygen + comments. This produces the 'html' and 'latex' versions of the + documentation. They are stored under the directory: + $top_builddir/doc/dox/libquvi-$VERSION + + Additionally, this target generates the manual pages if a2x(1) was + found by configure. The manual page files can be found at: + $top_srcdir/doc/man3/ -- input + $top_builddir/doc/man3/ -- output + + The Doxygen configuration file can be found at: + $top_srcdir/doc/dox/Doxygen.in -- input + $top_builddir/doc/dox/Doxygen -- output + + See also "Documentation". + + 'make distdoc' like above but produces tarballs from the documentation. + These tarballs are stored under the $top_builddir/ directory. + + Alternatively, these targets may be run individually: + 'make distdoc-html' + 'make distdoc-pdf' + 'make distdoc-latex' (depends on distdoc-pdf) + + Note that it is that Doxygen produces the Makefile that will be + used to generate the PDF file from the LaTeX files. + + +Tests +===== + +The tests use the GLib framework for testing. These tests require +the libquvi-scripts. The tests reside in the tests/ directory. + + 'make check' will run the test programs listed in the TEST_PROGS + variable in the tests/Makefile.am . 'make check' will fail if any + of the tests fail. This is identical to running 'make test'. + + 'make distcheck' will fail if any of the tests fail. + + NOTE: Define either + DISTCHECK_CONFIGURE_FLAGS=--with--scriptsdir=DIR + or + PKG_CONFIG_PATH=DIR + + See also the --with-scriptsdir description above + (under "Simple install procedure"). + + 'make test-mem' requires the valgrind(1) program. These tests will + not automatically. + +The tests use the gtester(1) and gtester-report(1) commands to produce +the logs. These programs are part of GLib. The test programs will produce: + $(top_builddir)/tests/$test_program.html # gtester-report + $(top_builddir)/tests/$test_program.xml # gtester + +The 'test-mem' target will, additionally, produce: + $(top_builddir)/tests/$test_program.vgdump # valgrind + + +Tests: Environment variables +---------------------------- + +The testsuite supports the following environment variables: + + TEST_INTERNET will enable the tests that require an Internet connection. + + TEST_VERBOSE will enable verbose libcurl(3) output. + + TEST_SKIP will disable the specified tests. This list is a comma-separated + list of test names. The comma-separated values are treated as regular + expression patterns. + +Example: + % env TEST_VERBOSE=1 TEST_SKIP=test_quvi,test_resolve_ make test + + +Tests: Scripts +-------------- + +The tests/ directory contains: + + 'find_tests.sh' will dump a list of available tests. + + 'run_tests.sh' is a convenience script that wraps many of the + testsuite features making them available via GUI. Note that + this script requires zenity(1). + +For more info, run these scripts with the '-h' switch. + + +Tests: Notes +------------ + + * The test 'test/supports' uses the HTTP proxy address + "http://localhost:12345" to simulate a network access error. + + If you have something listening to that port, you may want to edit + test/supports.c to use some other port. + + * Apart from the above, the testsuite does not force any specific + proxy address with the Internet requiring tests. + + If you need to use a proxy, refer to the curl(1) manual page for + a complete list of the supported environment variables (e.g. http_proxy). + + libquvi uses libcurl to connect to the internet. + + +How to report bugs +================== + +Please see: http://quvi.sourceforge.net/#bugs + + +Patches +======= + +Please see: http://quvi.sourceforge.net/contrib/ + + +License +======= + +libquvi is Free Software licensed under the GNU Affero GPLv3+ diff --git a/VERSION b/VERSION new file mode 100644 index 0000000..ed5c3a8 --- /dev/null +++ b/VERSION @@ -0,0 +1 @@ +v0.9.4 diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..f2fd51e --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,1441 @@ +# generated automatically by aclocal 1.11.6 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, +# Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically `autoreconf'.])]) + +dnl Autoconf macros for libgcrypt +dnl Copyright (C) 2002, 2004 Free Software Foundation, Inc. +dnl +dnl This file is free software; as a special exception the author gives +dnl unlimited permission to copy and/or distribute it, with or without +dnl modifications, as long as this notice is preserved. +dnl +dnl This file is distributed in the hope that it will be useful, but +dnl WITHOUT ANY WARRANTY, to the extent permitted by law; without even the +dnl implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + + +dnl AM_PATH_LIBGCRYPT([MINIMUM-VERSION, +dnl [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND ]]]) +dnl Test for libgcrypt and define LIBGCRYPT_CFLAGS and LIBGCRYPT_LIBS. +dnl MINIMUN-VERSION is a string with the version number optionalliy prefixed +dnl with the API version to also check the API compatibility. Example: +dnl a MINIMUN-VERSION of 1:1.2.5 won't pass the test unless the installed +dnl version of libgcrypt is at least 1.2.5 *and* the API number is 1. Using +dnl this features allows to prevent build against newer versions of libgcrypt +dnl with a changed API. +dnl +AC_DEFUN([AM_PATH_LIBGCRYPT], +[ AC_ARG_WITH(libgcrypt-prefix, + AC_HELP_STRING([--with-libgcrypt-prefix=PFX], + [prefix where LIBGCRYPT is installed (optional)]), + libgcrypt_config_prefix="$withval", libgcrypt_config_prefix="") + if test x$libgcrypt_config_prefix != x ; then + if test x${LIBGCRYPT_CONFIG+set} != xset ; then + LIBGCRYPT_CONFIG=$libgcrypt_config_prefix/bin/libgcrypt-config + fi + fi + + AC_PATH_TOOL(LIBGCRYPT_CONFIG, libgcrypt-config, no) + tmp=ifelse([$1], ,1:1.2.0,$1) + if echo "$tmp" | grep ':' >/dev/null 2>/dev/null ; then + req_libgcrypt_api=`echo "$tmp" | sed 's/\(.*\):\(.*\)/\1/'` + min_libgcrypt_version=`echo "$tmp" | sed 's/\(.*\):\(.*\)/\2/'` + else + req_libgcrypt_api=0 + min_libgcrypt_version="$tmp" + fi + + AC_MSG_CHECKING(for LIBGCRYPT - version >= $min_libgcrypt_version) + ok=no + if test "$LIBGCRYPT_CONFIG" != "no" ; then + req_major=`echo $min_libgcrypt_version | \ + sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\)/\1/'` + req_minor=`echo $min_libgcrypt_version | \ + sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\)/\2/'` + req_micro=`echo $min_libgcrypt_version | \ + sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\)/\3/'` + libgcrypt_config_version=`$LIBGCRYPT_CONFIG --version` + major=`echo $libgcrypt_config_version | \ + sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\).*/\1/'` + minor=`echo $libgcrypt_config_version | \ + sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\).*/\2/'` + micro=`echo $libgcrypt_config_version | \ + sed 's/\([[0-9]]*\)\.\([[0-9]]*\)\.\([[0-9]]*\).*/\3/'` + if test "$major" -gt "$req_major"; then + ok=yes + else + if test "$major" -eq "$req_major"; then + if test "$minor" -gt "$req_minor"; then + ok=yes + else + if test "$minor" -eq "$req_minor"; then + if test "$micro" -ge "$req_micro"; then + ok=yes + fi + fi + fi + fi + fi + fi + if test $ok = yes; then + AC_MSG_RESULT([yes ($libgcrypt_config_version)]) + else + AC_MSG_RESULT(no) + fi + if test $ok = yes; then + # If we have a recent libgcrypt, we should also check that the + # API is compatible + if test "$req_libgcrypt_api" -gt 0 ; then + tmp=`$LIBGCRYPT_CONFIG --api-version 2>/dev/null || echo 0` + if test "$tmp" -gt 0 ; then + AC_MSG_CHECKING([LIBGCRYPT API version]) + if test "$req_libgcrypt_api" -eq "$tmp" ; then + AC_MSG_RESULT([okay]) + else + ok=no + AC_MSG_RESULT([does not match. want=$req_libgcrypt_api got=$tmp]) + fi + fi + fi + fi + if test $ok = yes; then + LIBGCRYPT_CFLAGS=`$LIBGCRYPT_CONFIG --cflags` + LIBGCRYPT_LIBS=`$LIBGCRYPT_CONFIG --libs` + ifelse([$2], , :, [$2]) + if test x"$host" != x ; then + libgcrypt_config_host=`$LIBGCRYPT_CONFIG --host 2>/dev/null || echo none` + if test x"$libgcrypt_config_host" != xnone ; then + if test x"$libgcrypt_config_host" != x"$host" ; then + AC_MSG_WARN([[ +*** +*** The config script $LIBGCRYPT_CONFIG was +*** built for $libgcrypt_config_host and thus may not match the +*** used host $host. +*** You may want to use the configure option --with-libgcrypt-prefix +*** to specify a matching config script. +***]]) + fi + fi + fi + else + LIBGCRYPT_CFLAGS="" + LIBGCRYPT_LIBS="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(LIBGCRYPT_CFLAGS) + AC_SUBST(LIBGCRYPT_LIBS) +]) + +# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +# serial 1 (pkg-config-0.24) +# +# Copyright © 2004 Scott James Remnant . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# PKG_PROG_PKG_CONFIG([MIN-VERSION]) +# ---------------------------------- +AC_DEFUN([PKG_PROG_PKG_CONFIG], +[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) +m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) +AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) +AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) +AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=m4_default([$1], [0.9.0]) + AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + PKG_CONFIG="" + fi +fi[]dnl +])# PKG_PROG_PKG_CONFIG + +# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +# +# Check to see whether a particular set of modules exists. Similar +# to PKG_CHECK_MODULES(), but does not set variables or print errors. +# +# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +# only at the first occurence in configure.ac, so if the first place +# it's called might be skipped (such as if it is within an "if", you +# have to call PKG_CHECK_EXISTS manually +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_EXISTS], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +if test -n "$PKG_CONFIG" && \ + AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then + m4_default([$2], [:]) +m4_ifvaln([$3], [else + $3])dnl +fi]) + +# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +# --------------------------------------------- +m4_define([_PKG_CONFIG], +[if test -n "$$1"; then + pkg_cv_[]$1="$$1" + elif test -n "$PKG_CONFIG"; then + PKG_CHECK_EXISTS([$3], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes ], + [pkg_failed=yes]) + else + pkg_failed=untried +fi[]dnl +])# _PKG_CONFIG + +# _PKG_SHORT_ERRORS_SUPPORTED +# ----------------------------- +AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi[]dnl +])# _PKG_SHORT_ERRORS_SUPPORTED + + +# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +# [ACTION-IF-NOT-FOUND]) +# +# +# Note that if there is a possibility the first call to +# PKG_CHECK_MODULES might not happen, you should be sure to include an +# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac +# +# +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_MODULES], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl +AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl + +pkg_failed=no +AC_MSG_CHECKING([for $1]) + +_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) +_PKG_CONFIG([$1][_LIBS], [libs], [$2]) + +m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS +and $1[]_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details.]) + +if test $pkg_failed = yes; then + AC_MSG_RESULT([no]) + _PKG_SHORT_ERRORS_SUPPORTED + if test $_pkg_short_errors_supported = yes; then + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` + else + $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + + m4_default([$4], [AC_MSG_ERROR( +[Package requirements ($2) were not met: + +$$1_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +_PKG_TEXT])[]dnl + ]) +elif test $pkg_failed = untried; then + AC_MSG_RESULT([no]) + m4_default([$4], [AC_MSG_FAILURE( +[The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +_PKG_TEXT + +To get pkg-config, see .])[]dnl + ]) +else + $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS + $1[]_LIBS=$pkg_cv_[]$1[]_LIBS + AC_MSG_RESULT([yes]) + $3 +fi[]dnl +])# PKG_CHECK_MODULES + +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software +# Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.11' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.11.6], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.11.6])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# Copyright (C) 2011 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_PROG_AR([ACT-IF-FAIL]) +# ------------------------- +# Try to determine the archiver interface, and trigger the ar-lib wrapper +# if it is needed. If the detection of archiver interface fails, run +# ACT-IF-FAIL (default is to abort configure with a proper error message). +AC_DEFUN([AM_PROG_AR], +[AC_BEFORE([$0], [LT_INIT])dnl +AC_BEFORE([$0], [AC_PROG_LIBTOOL])dnl +AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([ar-lib])dnl +AC_CHECK_TOOLS([AR], [ar lib "link -lib"], [false]) +: ${AR=ar} + +AC_CACHE_CHECK([the archiver ($AR) interface], [am_cv_ar_interface], + [am_cv_ar_interface=ar + AC_COMPILE_IFELSE([AC_LANG_SOURCE([[int some_variable = 0;]])], + [am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([am_ar_try]) + if test "$ac_status" -eq 0; then + am_cv_ar_interface=ar + else + am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([am_ar_try]) + if test "$ac_status" -eq 0; then + am_cv_ar_interface=lib + else + am_cv_ar_interface=unknown + fi + fi + rm -f conftest.lib libconftest.a + ]) + ]) + +case $am_cv_ar_interface in +ar) + ;; +lib) + # Microsoft lib, so override with the ar-lib wrapper script. + # FIXME: It is wrong to rewrite AR. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__AR in this case, + # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something + # similar. + AR="$am_aux_dir/ar-lib $AR" + ;; +unknown) + m4_default([$1], + [AC_MSG_ERROR([could not determine $AR interface])]) + ;; +esac +AC_SUBST([AR])dnl +]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 9 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009, +# 2010, 2011 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 12 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 5 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 16 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.62])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +]) +_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl +dnl The `parallel-tests' driver may need to know about EXEEXT, so add the +dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro +dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl +]) + +dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation, +# Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 6 + +# AM_PROG_CC_C_O +# -------------- +# Like AC_PROG_CC_C_O, but changed for automake. +AC_DEFUN([AM_PROG_CC_C_O], +[AC_REQUIRE([AC_PROG_CC_C_O])dnl +AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +# FIXME: we rely on the cache variable name because +# there is no other way. +set dummy $CC +am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` +eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o +if test "$am_t" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +dnl Make sure AC_PROG_CC is never called again, or it will override our +dnl setting of CC. +m4_define([AC_PROG_CC], + [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 6 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation, +# Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_PROG_MKDIR_P +# --------------- +# Check for `mkdir -p'. +AC_DEFUN([AM_PROG_MKDIR_P], +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software +# Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_RUN_LOG(COMMAND) +# ------------------- +# Run COMMAND, save the exit status in ac_status, and log it. +# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) +AC_DEFUN([AM_RUN_LOG], +[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD + ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + (exit $ac_status); }]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; +esac + +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2009, 2011 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# (`yes' being less verbose, `no' or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], +[ --enable-silent-rules less verbose build output (undo: `make V=1') + --disable-silent-rules verbose build output (undo: `make V=0')]) +case $enable_silent_rules in +yes) AM_DEFAULT_VERBOSITY=0;; +no) AM_DEFAULT_VERBOSITY=1;; +*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few `make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using `$V' instead of `$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([m4/gettext.m4]) +m4_include([m4/iconv.m4]) +m4_include([m4/intlmacosx.m4]) +m4_include([m4/lib-ld.m4]) +m4_include([m4/lib-link.m4]) +m4_include([m4/lib-prefix.m4]) +m4_include([m4/libtool.m4]) +m4_include([m4/ltoptions.m4]) +m4_include([m4/ltsugar.m4]) +m4_include([m4/ltversion.m4]) +m4_include([m4/lt~obsolete.m4]) +m4_include([m4/nls.m4]) +m4_include([m4/po.m4]) +m4_include([m4/progtest.m4]) diff --git a/config.aux/ar-lib b/config.aux/ar-lib new file mode 100755 index 0000000..0f62c6f --- /dev/null +++ b/config.aux/ar-lib @@ -0,0 +1,270 @@ +#! /bin/sh +# Wrapper for Microsoft lib.exe + +me=ar-lib +scriptversion=2012-03-01.08; # UTC + +# Copyright (C) 2010, 2012 Free Software Foundation, Inc. +# Written by Peter Rosin . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + + +# func_error message +func_error () +{ + echo "$me: $1" 1>&2 + exit 1 +} + +file_conv= + +# func_file_conv build_file +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv in + mingw) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_at_file at_file operation archive +# Iterate over all members in AT_FILE performing OPERATION on ARCHIVE +# for each of them. +# When interpreting the content of the @FILE, do NOT use func_file_conv, +# since the user would need to supply preconverted file names to +# binutils ar, at least for MinGW. +func_at_file () +{ + operation=$2 + archive=$3 + at_file_contents=`cat "$1"` + eval set x "$at_file_contents" + shift + + for member + do + $AR -NOLOGO $operation:"$member" "$archive" || exit $? + done +} + +case $1 in + '') + func_error "no command. Try '$0 --help' for more information." + ;; + -h | --h*) + cat <. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/config.aux/config.guess b/config.aux/config.guess new file mode 100755 index 0000000..d622a44 --- /dev/null +++ b/config.aux/config.guess @@ -0,0 +1,1530 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011, 2012 Free Software Foundation, Inc. + +timestamp='2012-02-10' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner. Please send patches (context +# diff format) to and include a ChangeLog +# entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`/usr/bin/uname -p` + case ${UNAME_PROCESSOR} in + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:MSYS*:*) + echo ${UNAME_MACHINE}-pc-msys + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + aarch64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + hexagon:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + LIBC=gnu + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-gnu + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + tile*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + i386) + eval $set_cc_for_build + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + UNAME_PROCESSOR="x86_64" + fi + fi ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-?:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk${UNAME_RELEASE} + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo ${UNAME_MACHINE}-unknown-esx + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/config.aux/config.rpath b/config.aux/config.rpath new file mode 100755 index 0000000..17298f2 --- /dev/null +++ b/config.aux/config.rpath @@ -0,0 +1,672 @@ +#! /bin/sh +# Output a system dependent set of variables, describing how to set the +# run time search path of shared libraries in an executable. +# +# Copyright 1996-2010 Free Software Foundation, Inc. +# Taken from GNU libtool, 2001 +# Originally by Gordon Matzigkeit , 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. +# +# The first argument passed to this file is the canonical host specification, +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld +# should be set by the caller. +# +# The set of defined variables is at the end of this script. + +# Known limitations: +# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer +# than 256 bytes, otherwise the compiler driver will dump core. The only +# known workaround is to choose shorter directory names for the build +# directory and/or the installation directory. + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +shrext=.so + +host="$1" +host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + +# Code taken from libtool.m4's _LT_CC_BASENAME. + +for cc_temp in $CC""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` + +# Code taken from libtool.m4's _LT_COMPILER_PIC. + +wl= +if test "$GCC" = yes; then + wl='-Wl,' +else + case "$host_os" in + aix*) + wl='-Wl,' + ;; + darwin*) + case $cc_basename in + xlc*) + wl='-Wl,' + ;; + esac + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) + ;; + hpux9* | hpux10* | hpux11*) + wl='-Wl,' + ;; + irix5* | irix6* | nonstopux*) + wl='-Wl,' + ;; + newsos6) + ;; + linux* | k*bsd*-gnu) + case $cc_basename in + ecc*) + wl='-Wl,' + ;; + icc* | ifort*) + wl='-Wl,' + ;; + lf95*) + wl='-Wl,' + ;; + pgcc | pgf77 | pgf90) + wl='-Wl,' + ;; + ccc*) + wl='-Wl,' + ;; + como) + wl='-lopt=' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + wl='-Wl,' + ;; + esac + ;; + esac + ;; + osf3* | osf4* | osf5*) + wl='-Wl,' + ;; + rdos*) + ;; + solaris*) + wl='-Wl,' + ;; + sunos4*) + wl='-Qoption ld ' + ;; + sysv4 | sysv4.2uw2* | sysv4.3*) + wl='-Wl,' + ;; + sysv4*MP*) + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + wl='-Wl,' + ;; + unicos*) + wl='-Wl,' + ;; + uts4*) + ;; + esac +fi + +# Code taken from libtool.m4's _LT_LINKER_SHLIBS. + +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no + +case "$host_os" in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + # Unlike libtool, we use -rpath here, not --rpath, since the documented + # option of GNU ld is called -rpath, not --rpath. + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + case "$host_os" in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + fi + ;; + amigaos*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we cannot use + # them. + ld_shlibs=no + ;; + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + cygwin* | mingw* | pw32* | cegcc*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + interix[3-9]*) + hardcode_direct=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + gnu* | linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + netbsd*) + ;; + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + else + ld_shlibs=no + fi + ;; + esac + ;; + sunos4*) + hardcode_direct=yes + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + esac + if test "$ld_shlibs" = no; then + hardcode_libdir_flag_spec= + fi +else + case "$host_os" in + aix3*) + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + else + aix_use_runtimelinking=no + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + fi + hardcode_direct=yes + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + fi + # Begin _LT_AC_SYS_LIBPATH_AIX. + echo 'int main () { return 0; }' > conftest.c + ${CC} ${LDFLAGS} conftest.c -o conftest + aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + fi + if test -z "$aix_libpath"; then + aix_libpath="/usr/lib:/lib" + fi + rm -f conftest.c conftest + # End _LT_AC_SYS_LIBPATH_AIX. + if test "$aix_use_runtimelinking" = yes; then + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + else + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + fi + fi + ;; + amigaos*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + bsdi[45]*) + ;; + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + libext=lib + ;; + darwin* | rhapsody*) + hardcode_direct=no + if test "$GCC" = yes ; then + : + else + case $cc_basename in + xlc*) + ;; + *) + ld_shlibs=no + ;; + esac + fi + ;; + dgux*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + freebsd1*) + ld_shlibs=no + ;; + freebsd2.2*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + freebsd2*) + hardcode_direct=yes + hardcode_minus_L=yes + ;; + freebsd* | dragonfly*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + hpux9*) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + hpux10*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + hpux11*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + ;; + *) + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + irix5* | irix6* | nonstopux*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + netbsd*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + newsos6) + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + else + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + osf3*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + osf4* | osf5*) + if test "$GCC" = yes; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + # Both cc and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + solaris*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + sunos4*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + ;; + sysv4) + case $host_vendor in + sni) + hardcode_direct=yes # is this really true??? + ;; + siemens) + hardcode_direct=no + ;; + motorola) + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + ;; + sysv4.3*) + ;; + sysv4*MP*) + if test -d /usr/nec; then + ld_shlibs=yes + fi + ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + ;; + sysv5* | sco3.2v5* | sco5v6*) + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator=':' + ;; + uts4*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + *) + ld_shlibs=no + ;; + esac +fi + +# Check dynamic linker characteristics +# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. +# Unlike libtool.m4, here we don't care about _all_ names of the library, but +# only about the one the linker finds when passed -lNAME. This is the last +# element of library_names_spec in libtool.m4, or possibly two of them if the +# linker has special search rules. +library_names_spec= # the last element of library_names_spec in libtool.m4 +libname_spec='lib$name' +case "$host_os" in + aix3*) + library_names_spec='$libname.a' + ;; + aix[4-9]*) + library_names_spec='$libname$shrext' + ;; + amigaos*) + library_names_spec='$libname.a' + ;; + beos*) + library_names_spec='$libname$shrext' + ;; + bsdi[45]*) + library_names_spec='$libname$shrext' + ;; + cygwin* | mingw* | pw32* | cegcc*) + shrext=.dll + library_names_spec='$libname.dll.a $libname.lib' + ;; + darwin* | rhapsody*) + shrext=.dylib + library_names_spec='$libname$shrext' + ;; + dgux*) + library_names_spec='$libname$shrext' + ;; + freebsd1*) + ;; + freebsd* | dragonfly*) + case "$host_os" in + freebsd[123]*) + library_names_spec='$libname$shrext$versuffix' ;; + *) + library_names_spec='$libname$shrext' ;; + esac + ;; + gnu*) + library_names_spec='$libname$shrext' + ;; + hpux9* | hpux10* | hpux11*) + case $host_cpu in + ia64*) + shrext=.so + ;; + hppa*64*) + shrext=.sl + ;; + *) + shrext=.sl + ;; + esac + library_names_spec='$libname$shrext' + ;; + interix[3-9]*) + library_names_spec='$libname$shrext' + ;; + irix5* | irix6* | nonstopux*) + library_names_spec='$libname$shrext' + case "$host_os" in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; + *) libsuff= shlibsuff= ;; + esac + ;; + esac + ;; + linux*oldld* | linux*aout* | linux*coff*) + ;; + linux* | k*bsd*-gnu) + library_names_spec='$libname$shrext' + ;; + knetbsd*-gnu) + library_names_spec='$libname$shrext' + ;; + netbsd*) + library_names_spec='$libname$shrext' + ;; + newsos6) + library_names_spec='$libname$shrext' + ;; + nto-qnx*) + library_names_spec='$libname$shrext' + ;; + openbsd*) + library_names_spec='$libname$shrext$versuffix' + ;; + os2*) + libname_spec='$name' + shrext=.dll + library_names_spec='$libname.a' + ;; + osf3* | osf4* | osf5*) + library_names_spec='$libname$shrext' + ;; + rdos*) + ;; + solaris*) + library_names_spec='$libname$shrext' + ;; + sunos4*) + library_names_spec='$libname$shrext$versuffix' + ;; + sysv4 | sysv4.3*) + library_names_spec='$libname$shrext' + ;; + sysv4*MP*) + library_names_spec='$libname$shrext' + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + library_names_spec='$libname$shrext' + ;; + uts4*) + library_names_spec='$libname$shrext' + ;; +esac + +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' +escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` +shlibext=`echo "$shrext" | sed -e 's,^\.,,'` +escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` + +LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to . Submit a context +# diff and a properly formatted GNU ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ + linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + android-linux) + os=-linux-android + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*178) + os=-lynxos178 + ;; + -lynx*5) + os=-lynxos5 + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | aarch64 | aarch64_be \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | be32 | be64 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | epiphany \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | hexagon \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | le32 | le64 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nds32 | nds32le | nds32be \ + | nios | nios2 \ + | ns16k | ns32k \ + | open8 \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pyramid \ + | rl78 | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | we32k \ + | x86 | xc16x | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + c54x) + basic_machine=tic54x-unknown + ;; + c55x) + basic_machine=tic55x-unknown + ;; + c6x) + basic_machine=tic6x-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip) + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + xgate) + basic_machine=$basic_machine-unknown + os=-none + ;; + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | aarch64-* | aarch64_be-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | be32-* | be64-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | hexagon-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | le32-* | le64-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nds32-* | nds32le-* | nds32be-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pyramid-* \ + | rl78-* | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | tahoe-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile*-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ + | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c54x-*) + basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c55x-*) + basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c6x-*) + basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16 | cr16-*) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze) + basic_machine=microblaze-xilinx + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + msys) + basic_machine=i386-pc + os=-msys + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + nacl) + basic_machine=le32-unknown + os=-nacl + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + neo-tandem) + basic_machine=neo-tandem + ;; + nse-tandem) + basic_machine=nse-tandem + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc | ppcbe) basic_machine=powerpc-unknown + ;; + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tile*) + basic_machine=$basic_machine-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-android* \ + | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -nacl*) + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + hexagon-*) + os=-elf + ;; + tic54x-*) + os=-coff + ;; + tic55x-*) + os=-coff + ;; + tic6x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/config.aux/depcomp b/config.aux/depcomp new file mode 100755 index 0000000..25a39e6 --- /dev/null +++ b/config.aux/depcomp @@ -0,0 +1,708 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2012-03-27.16; # UTC + +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010, +# 2011, 2012 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by 'PROGRAMS ARGS'. + object Object file output by 'PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputting dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +# A tabulation character. +tab=' ' +# A newline character. +nl=' +' + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp +fi + +if test "$depmode" = msvc7msys; then + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 +fi + +if test "$depmode" = xlc; then + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations. + gccflag=-qmakedep=gcc,-MF + depmode=gcc +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the "deleted header file" problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' "$nl" < "$tmpdepfile" | +## Some versions of gcc put a space before the ':'. On the theory +## that the space means something, we add a space to the output as +## well. hp depmode also adds that space, but also prefixes the VPATH +## to the object. Take care to not repeat it in the output. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like '#:fec' to the end of the + # dependency line. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr "$nl" ' ' >> "$depfile" + echo >> "$depfile" + + # The second pass generates a dummy entry for each header file. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +xlc) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts '$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + # Each line is of the form 'foo.o: dependent.h'. + # Do two passes, one to just change these to + # '$object: dependent.h' and one to simply 'dependent.h:'. + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'. + # However on + # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using '\': + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + # tcc 0.9.26 (FIXME still under development at the moment of writing) + # will emit a similar output, but also prepend the continuation lines + # with horizontal tabulation characters. + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form 'foo.o: dependent.h', + # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'. + # Do two passes, one to just change these to + # '$object: dependent.h' and one to simply 'dependent.h:'. + sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \ + < "$tmpdepfile" > "$depfile" + sed ' + s/[ '"$tab"'][ '"$tab"']*/ /g + s/^ *// + s/ *\\*$// + s/^[^:]*: *// + /^$/d + /:$/d + s/$/ :/ + ' < "$tmpdepfile" >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add 'dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in 'foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mechanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +msvc7) + if test "$libtool" = yes; then + showIncludes=-Wc,-showIncludes + else + showIncludes=-showIncludes + fi + "$@" $showIncludes > "$tmpdepfile" + stat=$? + grep -v '^Note: including file: ' "$tmpdepfile" + if test "$stat" = 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The first sed program below extracts the file names and escapes + # backslashes for cygpath. The second sed program outputs the file + # name when reading, but also accumulates all include files in the + # hold buffer in order to output them again at the end. This only + # works with sed implementations that can handle large buffers. + sed < "$tmpdepfile" -n ' +/^Note: including file: *\(.*\)/ { + s//\1/ + s/\\/\\\\/g + p +}' | $cygpath_u | sort -u | sed -n ' +s/ /\\ /g +s/\(.*\)/'"$tab"'\1 \\/p +s/.\(.*\) \\/\1:/ +H +$ { + s/.*/'"$tab"'/ + G + p +}' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvc7msys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for ':' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. + "$@" $dashmflag | + sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' "$nl" < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + # makedepend may prepend the VPATH from the source file name to the object. + # No need to regex-escape $object, excess matching of '.' is harmless. + sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" + echo "$tab" >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/config.aux/install-sh b/config.aux/install-sh new file mode 100755 index 0000000..a9244eb --- /dev/null +++ b/config.aux/install-sh @@ -0,0 +1,527 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2011-01-19.21; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + # Protect names problematic for `test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + # Protect names problematic for `test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names problematic for `test' and other utilities. + case $src in + -* | [=\(\)!]) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + dst=$dst_arg + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/config.aux/ltmain.sh b/config.aux/ltmain.sh new file mode 100644 index 0000000..33f642a --- /dev/null +++ b/config.aux/ltmain.sh @@ -0,0 +1,9661 @@ + +# libtool (GNU libtool) 2.4.2 +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --no-quiet, --no-silent +# print informational messages (default) +# --no-warn don't display warning messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print more informational messages than default +# --no-verbose don't print the extra informational messages +# --version print version information +# -h, --help, --help-all print short, long, or detailed help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. When passed as first option, +# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1.1 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to . +# GNU libtool home page: . +# General help using GNU software: . + +PROGRAM=libtool +PACKAGE=libtool +VERSION="2.4.2 Debian-2.4.2-1.1" +TIMESTAMP="" +package_revision=1.3337 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# NLS nuisances: We save the old values to restore during execute mode. +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done +LC_ALL=C +LANGUAGE=C +export LANGUAGE LC_ALL + +$lt_unset CDPATH + + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + + + +: ${CP="cp -f"} +test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +dirname="s,/[^/]*$,," +basename="s,^.*/,," + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} # func_dirname may be replaced by extended shell implementation + + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "${1}" | $SED "$basename"` +} # func_basename may be replaced by extended shell implementation + + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` +} # func_dirname_and_basename may be replaced by extended shell implementation + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname may be replaced by extended shell implementation + + +# These SED scripts presuppose an absolute path with a trailing slash. +pathcar='s,^/\([^/]*\).*$,\1,' +pathcdr='s,^/[^/]*,,' +removedotparts=':dotsl + s@/\./@/@g + t dotsl + s,/\.$,/,' +collapseslashes='s@/\{1,\}@/@g' +finalslash='s,/*$,/,' + +# func_normal_abspath PATH +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +# value returned in "$func_normal_abspath_result" +func_normal_abspath () +{ + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` + while :; do + # Processed it all yet? + if test "$func_normal_abspath_tpath" = / ; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result" ; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + +# func_relative_path SRCDIR DSTDIR +# generates a relative path from SRCDIR to DSTDIR, with a trailing +# slash if non-empty, suitable for immediately appending a filename +# without needing to append a separator. +# value returned in "$func_relative_path_result" +func_relative_path () +{ + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=${func_dirname_result} + if test "x$func_relative_path_tlibdir" = x ; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test "x$func_stripname_result" != x ; then + func_relative_path_result=${func_relative_path_result}/${func_stripname_result} + fi + + # Normalisation. If bindir is libdir, return empty string, + # else relative path ending with a slash; either way, target + # file name can be directly appended. + if test ! -z "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result/" + func_relative_path_result=$func_stripname_result + fi +} + +# The name of this program: +func_dirname_and_basename "$progpath" +progname=$func_basename_result + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=${PATH_SEPARATOR-:} + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' + +# Sed substitution that converts a w32 file name or path +# which contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }$*" +} + +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + done + my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} + + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + + $ECHO "$my_tmpdir" +} + + +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "$1" | $SED \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + + +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + +# func_tr_sh +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $opt_debug + + $SED -n '/(C)/!b go + :more + /\./!{ + N + s/\n# / / + b more + } + :go + /^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $opt_debug + + $SED -n '/^# Usage:/,/^# *.*--help/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + echo + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help [NOEXIT] +# Echo long help message to standard output and exit, +# unless 'noexit' is passed as argument. +func_help () +{ + $opt_debug + + $SED -n '/^# Usage:/,/# Report bugs to/ { + :print + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ + p + d + } + /^# .* home page:/b print + /^# General help using/b print + ' < "$progpath" + ret=$? + if test -z "$1"; then + exit $ret + fi +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + $opt_debug + + func_error "missing argument for $1." + exit_cmd=exit +} + + +# func_split_short_opt shortopt +# Set func_split_short_opt_name and func_split_short_opt_arg shell +# variables after splitting SHORTOPT after the 2nd character. +func_split_short_opt () +{ + my_sed_short_opt='1s/^\(..\).*$/\1/;q' + my_sed_short_rest='1s/^..\(.*\)$/\1/;q' + + func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` + func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` +} # func_split_short_opt may be replaced by extended shell implementation + + +# func_split_long_opt longopt +# Set func_split_long_opt_name and func_split_long_opt_arg shell +# variables after splitting LONGOPT at the `=' sign. +func_split_long_opt () +{ + my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' + my_sed_long_arg='1s/^--[^=]*=//' + + func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` + func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` +} # func_split_long_opt may be replaced by extended shell implementation + +exit_cmd=: + + + + + +magic="%%%MAGIC variable%%%" +magic_exe="%%%MAGIC EXE variable%%%" + +# Global variables. +nonopt= +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "${1}=\$${1}\${2}" +} # func_append may be replaced by extended shell implementation + +# func_append_quoted var value +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +func_append_quoted () +{ + func_quote_for_eval "${2}" + eval "${1}=\$${1}\\ \$func_quote_for_eval_result" +} # func_append_quoted may be replaced by extended shell implementation + + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "${@}"` +} # func_arith may be replaced by extended shell implementation + + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` +} # func_len may be replaced by extended shell implementation + + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} # func_lo2o may be replaced by extended shell implementation + + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +} # func_xform may be replaced by extended shell implementation + + +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} + + +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + +# func_features +# Display the features supported by this script. +func_features () +{ + echo "host: $host" + if test "$build_libtool_libs" = yes; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + + exit $? +} + +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +# Shorthand for --mode=foo, only valid as the first argument +case $1 in +clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; +compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; +execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; +finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; +install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; +link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; +uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; +esac + + + +# Option defaults: +opt_debug=: +opt_dry_run=false +opt_config=false +opt_preserve_dup_deps=false +opt_features=false +opt_finish=false +opt_help=false +opt_help_all=false +opt_silent=: +opt_warning=: +opt_verbose=: +opt_silent=false +opt_verbose=false + + +# Parse options once, thoroughly. This comes as soon as possible in the +# script to make things like `--version' happen as quickly as we can. +{ + # this just eases exit handling + while test $# -gt 0; do + opt="$1" + shift + case $opt in + --debug|-x) opt_debug='set -x' + func_echo "enabling shell trace mode" + $opt_debug + ;; + --dry-run|--dryrun|-n) + opt_dry_run=: + ;; + --config) + opt_config=: +func_config + ;; + --dlopen|-dlopen) + optarg="$1" + opt_dlopen="${opt_dlopen+$opt_dlopen +}$optarg" + shift + ;; + --preserve-dup-deps) + opt_preserve_dup_deps=: + ;; + --features) + opt_features=: +func_features + ;; + --finish) + opt_finish=: +set dummy --mode finish ${1+"$@"}; shift + ;; + --help) + opt_help=: + ;; + --help-all) + opt_help_all=: +opt_help=': help-all' + ;; + --mode) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_mode="$optarg" +case $optarg in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; +esac + shift + ;; + --no-silent|--no-quiet) + opt_silent=false +func_append preserve_args " $opt" + ;; + --no-warning|--no-warn) + opt_warning=false +func_append preserve_args " $opt" + ;; + --no-verbose) + opt_verbose=false +func_append preserve_args " $opt" + ;; + --silent|--quiet) + opt_silent=: +func_append preserve_args " $opt" + opt_verbose=false + ;; + --verbose|-v) + opt_verbose=: +func_append preserve_args " $opt" +opt_silent=false + ;; + --tag) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_tag="$optarg" +func_append preserve_args " $opt $optarg" +func_enable_tag "$optarg" + shift + ;; + + -\?|-h) func_usage ;; + --help) func_help ;; + --version) func_version ;; + + # Separate optargs to long options: + --*=*) + func_split_long_opt "$opt" + set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} + shift + ;; + + # Separate non-argument short options: + -\?*|-h*|-n*|-v*) + func_split_short_opt "$opt" + set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + --) break ;; + -*) func_fatal_help "unrecognized option \`$opt'" ;; + *) set dummy "$opt" ${1+"$@"}; shift; break ;; + esac + done + + # Validate options: + + # save first non-option argument + if test "$#" -gt 0; then + nonopt="$opt" + shift + fi + + # preserve --debug + test "$opt_debug" = : || func_append preserve_args " --debug" + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + + $opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test "$opt_mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$opt_mode' for more information." + } + + + # Bail if the options were screwed + $exit_cmd $EXIT_FAILURE +} + + + + +## ----------- ## +## Main. ## +## ----------- ## + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_resolve_sysroot PATH +# Replace a leading = in PATH with a sysroot. Store the result into +# func_resolve_sysroot_result +func_resolve_sysroot () +{ + func_resolve_sysroot_result=$1 + case $func_resolve_sysroot_result in + =*) + func_stripname '=' '' "$func_resolve_sysroot_result" + func_resolve_sysroot_result=$lt_sysroot$func_stripname_result + ;; + esac +} + +# func_replace_sysroot PATH +# If PATH begins with the sysroot, replace it with = and +# store the result into func_replace_sysroot_result. +func_replace_sysroot () +{ + case "$lt_sysroot:$1" in + ?*:"$lt_sysroot"*) + func_stripname "$lt_sysroot" '' "$1" + func_replace_sysroot_result="=$func_stripname_result" + ;; + *) + # Including no sysroot. + func_replace_sysroot_result=$1 + ;; + esac +} + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case "$@ " in + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi + + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T </dev/null` + if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then + func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | + $SED -e "$lt_sed_naive_backslashify"` + else + func_convert_core_file_wine_to_w32_result= + fi + fi +} +# end: func_convert_core_file_wine_to_w32 + + +# func_convert_core_path_wine_to_w32 ARG +# Helper function used by path conversion functions when $build is *nix, and +# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly +# configured wine environment available, with the winepath program in $build's +# $PATH. Assumes ARG has no leading or trailing path separator characters. +# +# ARG is path to be converted from $build format to win32. +# Result is available in $func_convert_core_path_wine_to_w32_result. +# Unconvertible file (directory) names in ARG are skipped; if no directory names +# are convertible, then the result may be empty. +func_convert_core_path_wine_to_w32 () +{ + $opt_debug + # unfortunately, winepath doesn't convert paths, only file names + func_convert_core_path_wine_to_w32_result="" + if test -n "$1"; then + oldIFS=$IFS + IFS=: + for func_convert_core_path_wine_to_w32_f in $1; do + IFS=$oldIFS + func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" + if test -n "$func_convert_core_file_wine_to_w32_result" ; then + if test -z "$func_convert_core_path_wine_to_w32_result"; then + func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" + else + func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" + fi + fi + done + IFS=$oldIFS + fi +} +# end: func_convert_core_path_wine_to_w32 + + +# func_cygpath ARGS... +# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when +# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) +# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or +# (2), returns the Cygwin file name or path in func_cygpath_result (input +# file name or path is assumed to be in w32 format, as previously converted +# from $build's *nix or MSYS format). In case (3), returns the w32 file name +# or path in func_cygpath_result (input file name or path is assumed to be in +# Cygwin format). Returns an empty string on error. +# +# ARGS are passed to cygpath, with the last one being the file name or path to +# be converted. +# +# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH +# environment variable; do not put it in $PATH. +func_cygpath () +{ + $opt_debug + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then + func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` + if test "$?" -ne 0; then + # on failure, ensure result is empty + func_cygpath_result= + fi + else + func_cygpath_result= + func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" + fi +} +#end: func_cygpath + + +# func_convert_core_msys_to_w32 ARG +# Convert file name or path ARG from MSYS format to w32 format. Return +# result in func_convert_core_msys_to_w32_result. +func_convert_core_msys_to_w32 () +{ + $opt_debug + # awkward: cmd appends spaces to result + func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` +} +#end: func_convert_core_msys_to_w32 + + +# func_convert_file_check ARG1 ARG2 +# Verify that ARG1 (a file name in $build format) was converted to $host +# format in ARG2. Otherwise, emit an error message, but continue (resetting +# func_to_host_file_result to ARG1). +func_convert_file_check () +{ + $opt_debug + if test -z "$2" && test -n "$1" ; then + func_error "Could not determine host file name corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_file_result="$1" + fi +} +# end func_convert_file_check + + +# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH +# Verify that FROM_PATH (a path in $build format) was converted to $host +# format in TO_PATH. Otherwise, emit an error message, but continue, resetting +# func_to_host_file_result to a simplistic fallback value (see below). +func_convert_path_check () +{ + $opt_debug + if test -z "$4" && test -n "$3"; then + func_error "Could not determine the host path corresponding to" + func_error " \`$3'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This is a deliberately simplistic "conversion" and + # should not be "improved". See libtool.info. + if test "x$1" != "x$2"; then + lt_replace_pathsep_chars="s|$1|$2|g" + func_to_host_path_result=`echo "$3" | + $SED -e "$lt_replace_pathsep_chars"` + else + func_to_host_path_result="$3" + fi + fi +} +# end func_convert_path_check + + +# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG +# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT +# and appending REPL if ORIG matches BACKPAT. +func_convert_path_front_back_pathsep () +{ + $opt_debug + case $4 in + $1 ) func_to_host_path_result="$3$func_to_host_path_result" + ;; + esac + case $4 in + $2 ) func_append func_to_host_path_result "$3" + ;; + esac +} +# end func_convert_path_front_back_pathsep + + +################################################## +# $build to $host FILE NAME CONVERSION FUNCTIONS # +################################################## +# invoked via `$to_host_file_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# Result will be available in $func_to_host_file_result. + + +# func_to_host_file ARG +# Converts the file name ARG from $build format to $host format. Return result +# in func_to_host_file_result. +func_to_host_file () +{ + $opt_debug + $to_host_file_cmd "$1" +} +# end func_to_host_file + + +# func_to_tool_file ARG LAZY +# converts the file name ARG from $build format to toolchain format. Return +# result in func_to_tool_file_result. If the conversion in use is listed +# in (the comma separated) LAZY, no conversion takes place. +func_to_tool_file () +{ + $opt_debug + case ,$2, in + *,"$to_tool_file_cmd",*) + func_to_tool_file_result=$1 + ;; + *) + $to_tool_file_cmd "$1" + func_to_tool_file_result=$func_to_host_file_result + ;; + esac +} +# end func_to_tool_file + + +# func_convert_file_noop ARG +# Copy ARG to func_to_host_file_result. +func_convert_file_noop () +{ + func_to_host_file_result="$1" +} +# end func_convert_file_noop + + +# func_convert_file_msys_to_w32 ARG +# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_file_result. +func_convert_file_msys_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_to_host_file_result="$func_convert_core_msys_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_w32 + + +# func_convert_file_cygwin_to_w32 ARG +# Convert file name ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_file_cygwin_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # because $build is cygwin, we call "the" cygpath in $PATH; no need to use + # LT_CYGPATH in this case. + func_to_host_file_result=`cygpath -m "$1"` + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_cygwin_to_w32 + + +# func_convert_file_nix_to_w32 ARG +# Convert file name ARG from *nix to w32 format. Requires a wine environment +# and a working winepath. Returns result in func_to_host_file_result. +func_convert_file_nix_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_file_wine_to_w32 "$1" + func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_w32 + + +# func_convert_file_msys_to_cygwin ARG +# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_file_msys_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_cygpath -u "$func_convert_core_msys_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_cygwin + + +# func_convert_file_nix_to_cygwin ARG +# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed +# in a wine environment, working winepath, and LT_CYGPATH set. Returns result +# in func_to_host_file_result. +func_convert_file_nix_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. + func_convert_core_file_wine_to_w32 "$1" + func_cygpath -u "$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_cygwin + + +############################################# +# $build to $host PATH CONVERSION FUNCTIONS # +############################################# +# invoked via `$to_host_path_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# The result will be available in $func_to_host_path_result. +# +# Path separators are also converted from $build format to $host format. If +# ARG begins or ends with a path separator character, it is preserved (but +# converted to $host format) on output. +# +# All path conversion functions are named using the following convention: +# file name conversion function : func_convert_file_X_to_Y () +# path conversion function : func_convert_path_X_to_Y () +# where, for any given $build/$host combination the 'X_to_Y' value is the +# same. If conversion functions are added for new $build/$host combinations, +# the two new functions must follow this pattern, or func_init_to_host_path_cmd +# will break. + + +# func_init_to_host_path_cmd +# Ensures that function "pointer" variable $to_host_path_cmd is set to the +# appropriate value, based on the value of $to_host_file_cmd. +to_host_path_cmd= +func_init_to_host_path_cmd () +{ + $opt_debug + if test -z "$to_host_path_cmd"; then + func_stripname 'func_convert_file_' '' "$to_host_file_cmd" + to_host_path_cmd="func_convert_path_${func_stripname_result}" + fi +} + + +# func_to_host_path ARG +# Converts the path ARG from $build format to $host format. Return result +# in func_to_host_path_result. +func_to_host_path () +{ + $opt_debug + func_init_to_host_path_cmd + $to_host_path_cmd "$1" +} +# end func_to_host_path + + +# func_convert_path_noop ARG +# Copy ARG to func_to_host_path_result. +func_convert_path_noop () +{ + func_to_host_path_result="$1" +} +# end func_convert_path_noop + + +# func_convert_path_msys_to_w32 ARG +# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_path_result. +func_convert_path_msys_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from ARG. MSYS + # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; + # and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_msys_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_msys_to_w32 + + +# func_convert_path_cygwin_to_w32 ARG +# Convert path ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_path_cygwin_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_cygwin_to_w32 + + +# func_convert_path_nix_to_w32 ARG +# Convert path ARG from *nix to w32 format. Requires a wine environment and +# a working winepath. Returns result in func_to_host_file_result. +func_convert_path_nix_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_nix_to_w32 + + +# func_convert_path_msys_to_cygwin ARG +# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_path_msys_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_msys_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_msys_to_cygwin + + +# func_convert_path_nix_to_cygwin ARG +# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a +# a wine environment, working winepath, and LT_CYGPATH set. Returns result in +# func_to_host_file_result. +func_convert_path_nix_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_nix_to_cygwin + + +# func_mode_compile arg... +func_mode_compile () +{ + $opt_debug + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + pie_flag= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + test -n "$libobj" && \ + func_fatal_error "you cannot specify \`-o' more than once" + arg_mode=target + continue + ;; + + -pie | -fpie | -fPIE) + func_append pie_flag " $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) + func_append later " $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + func_append_quoted lastarg "$arg" + done + IFS="$save_ifs" + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result + + # Add the arguments to base_compile. + func_append base_compile " $lastarg" + continue + ;; + + *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + func_append_quoted base_compile "$lastarg" + done # for arg + + case $arg_mode in + arg) + func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) + func_fatal_error "you must specify a target with \`-o'" + ;; + *) + # Get the name of the library object. + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + case $libobj in + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) + func_xform "$libobj" + libobj=$func_xform_result + ;; + esac + + case $libobj in + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) + func_fatal_error "cannot determine name of library object from \`$libobj'" + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; + + -static) + build_libtool_libs=no + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + func_append removelist " $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist + func_append removelist " $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 + srcfile=$func_to_tool_file_result + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + func_mkdir_p "$xdir$objdir" + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + func_append command " -o $lobj" + fi + + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + func_append command " -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + func_append command "$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { + test "$opt_mode" = compile && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $opt_mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to build PIC objects only + -prefer-non-pic try to build non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$opt_mode'" + ;; + esac + + echo + $ECHO "Try \`$progname --help' for more information about other modes." +} + +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test "$opt_help" = :; then + func_mode_help + else + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | sed -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + sed '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $opt_dlopen; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + func_append dir "/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -* | *.la | *.lo ) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_append_quoted args "$file" + done + + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = execute && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libs= + libdirs= + admincmds= + + for opt in "$nonopt" ${1+"$@"} + do + if test -d "$opt"; then + func_append libdirs " $opt" + + elif test -f "$opt"; then + if func_lalib_unsafe_p "$opt"; then + func_append libs " $opt" + else + func_warning "\`$opt' is not a valid libtool archive" + fi + + else + func_fatal_error "invalid argument \`$opt'" + fi + done + + if test -n "$libs"; then + if test -n "$lt_sysroot"; then + sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` + sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" + else + sysroot_cmd= + fi + + # Remove sysroot references + if $opt_dry_run; then + for lib in $libs; do + echo "removing references to $lt_sysroot and \`=' prefixes from $lib" + done + else + tmpdir=`func_mktempdir` + for lib in $libs; do + sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + > $tmpdir/tmp-la + mv -f $tmpdir/tmp-la $lib + done + ${RM}r "$tmpdir" + fi + fi + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || func_append admincmds " + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo + + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." + ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + fi + exit $EXIT_SUCCESS +} + +test "$opt_mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + case $nonopt in *shtool*) :;; *) false;; esac; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + func_append install_prog "$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + no_mode=: + for arg + do + arg2= + if test -n "$dest"; then + func_append files " $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + if $install_cp; then :; else + prev=$arg + fi + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + if test "x$prev" = x-m && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false + fi + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + func_append install_prog " $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" + fi + func_append install_shared_prog " $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + func_append install_shared_prog " -m $func_quote_for_eval_result" + fi + fi + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + func_append staticlibs " $file" + ;; + + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) func_append current_libdirs " $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) func_append future_libdirs " $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + func_append dir "$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && func_append staticlibs " $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $tool_oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_to_tool_file "$progfile" func_convert_file_msys_to_w32 + func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" + $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + case $host in + *cygwin* | *mingw* | *cegcc* ) + # if an import library, we need to obtain dlname + if func_win32_import_lib_p "$dlprefile"; then + func_tr_sh "$dlprefile" + eval "curr_lafile=\$libfile_$func_tr_sh_result" + dlprefile_dlbasename="" + if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then + # Use subshell, to avoid clobbering current variable values + dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` + if test -n "$dlprefile_dlname" ; then + func_basename "$dlprefile_dlname" + dlprefile_dlbasename="$func_basename_result" + else + # no lafile. user explicitly requested -dlpreopen . + $sharedlib_from_linklib_cmd "$dlprefile" + dlprefile_dlbasename=$sharedlib_from_linklib_result + fi + fi + $opt_dry_run || { + if test -n "$dlprefile_dlbasename" ; then + eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' + else + func_warning "Could not compute DLL name from $name" + eval '$ECHO ": $name " >> "$nlist"' + fi + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + } + else # not an import lib + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + fi + ;; + *) + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + ;; + esac + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + echo >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +extern LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + echo >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) func_append symtab_cflags " $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + fi +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + +# func_cygming_dll_for_implib ARG +# +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib () +{ + $opt_debug + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` +} + +# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs +# +# The is the core of a fallback implementation of a +# platform-specific function to extract the name of the +# DLL associated with the specified import library LIBNAME. +# +# SECTION_NAME is either .idata$6 or .idata$7, depending +# on the platform and compiler that created the implib. +# +# Echos the name of the DLL associated with the +# specified import library. +func_cygming_dll_for_implib_fallback_core () +{ + $opt_debug + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` + $OBJDUMP -s --section "$1" "$2" 2>/dev/null | + $SED '/^Contents of section '"$match_literal"':/{ + # Place marker at beginning of archive member dllname section + s/.*/====MARK====/ + p + d + } + # These lines can sometimes be longer than 43 characters, but + # are always uninteresting + /:[ ]*file format pe[i]\{,1\}-/d + /^In archive [^:]*:/d + # Ensure marker is printed + /^====MARK====/p + # Remove all lines with less than 43 characters + /^.\{43\}/!d + # From remaining lines, remove first 43 characters + s/^.\{43\}//' | + $SED -n ' + # Join marker and all lines until next marker into a single line + /^====MARK====/ b para + H + $ b para + b + :para + x + s/\n//g + # Remove the marker + s/^====MARK====// + # Remove trailing dots and whitespace + s/[\. \t]*$// + # Print + /./p' | + # we now have a list, one entry per line, of the stringified + # contents of the appropriate section of all members of the + # archive which possess that section. Heuristic: eliminate + # all those which have a first or second character that is + # a '.' (that is, objdump's representation of an unprintable + # character.) This should work for all archives with less than + # 0x302f exports -- but will fail for DLLs whose name actually + # begins with a literal '.' or a single character followed by + # a '.'. + # + # Of those that remain, print the first one. + $SED -e '/^\./d;/^.\./d;q' +} + +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + +# func_cygming_dll_for_implib_fallback ARG +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# +# This fallback implementation is for use when $DLLTOOL +# does not support the --identify-strict option. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib_fallback () +{ + $opt_debug + if func_cygming_gnu_implib_p "$1" ; then + # binutils import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` + elif func_cygming_ms_implib_p "$1" ; then + # ms-generated import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` + else + # unknown + sharedlib_from_linklib_result="" + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + if test "$lock_old_archive_extraction" = yes; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test "$lock_old_archive_extraction" = yes; then + $opt_dry_run || rm -f "$lockfile" + fi + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +} + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=${1-no} + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + file=\"\$0\"" + + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi + +# Very basic option parsing. These options are (a) specific to +# the libtool wrapper, (b) are identical between the wrapper +# /script/ and the wrapper /executable/ which is used only on +# windows platforms, and (c) all begin with the string "--lt-" +# (application programs are unlikely to have options which match +# this pattern). +# +# There are only two supported options: --lt-debug and +# --lt-dump-script. There is, deliberately, no --lt-help. +# +# The first argument to this parsing function should be the +# script's $0 value, followed by "$@". +lt_option_debug= +func_parse_lt_options () +{ + lt_script_arg0=\$0 + shift + for lt_opt + do + case \"\$lt_opt\" in + --lt-debug) lt_option_debug=1 ;; + --lt-dump-script) + lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` + test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. + lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` + cat \"\$lt_dump_D/\$lt_dump_F\" + exit 0 + ;; + --lt-*) + \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 + exit 1 + ;; + esac + done + + # Print the debug banner immediately: + if test -n \"\$lt_option_debug\"; then + echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + fi +} + +# Used when --lt-debug. Prints its arguments to stdout +# (redirection is the responsibility of the caller) +func_lt_dump_args () +{ + lt_dump_args_N=1; + for lt_arg + do + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` + done +} + +# Core function for launching the target application +func_exec_program_core () +{ +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 +} + +# A function to encapsulate launching the target application +# Strips options in the --lt-* namespace from \$@ and +# launches target application with the remaining arguments. +func_exec_program () +{ + case \" \$* \" in + *\\ --lt-*) + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac + shift + done ;; + esac + func_exec_program_core \${1+\"\$@\"} +} + + # Parse options + func_parse_lt_options \"\$0\" \${1+\"\$@\"} + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + done + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # fixup the dll searchpath if we need to. + # + # Fix the DLL searchpath if we need to. Do this before prepending + # to shlibpath, because on Windows, both are PATH and uninstalled + # libraries must come first. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + + export $shlibpath_var +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + func_exec_program \${1+\"\$@\"} + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} + + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +#else +# include +# include +# ifdef __CYGWIN__ +# include +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +/* declarations of non-ANSI functions */ +#if defined(__MINGW32__) +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined(__CYGWIN__) +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined (other platforms) ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined(_MSC_VER) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +# ifndef _INTPTR_T_DEFINED +# define _INTPTR_T_DEFINED +# define intptr_t int +# endif +#elif defined(__MINGW32__) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined(__CYGWIN__) +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined (other platforms) ... */ +#endif + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +/* path handling portability macros */ +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#if defined(LT_DEBUGWRAPPER) +static int lt_debug = 1; +#else +static int lt_debug = 0; +#endif + +const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_debugprintf (const char *file, int line, const char *fmt, ...); +void lt_fatal (const char *file, int line, const char *message, ...); +static const char *nonnull (const char *s); +static const char *nonempty (const char *s); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); +EOF + + cat <= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", + nonempty (wrapper)); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + lt_debugprintf (__FILE__, __LINE__, + "checking path component for symlinks: %s\n", + tmp_pathspec); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + lt_fatal (__FILE__, __LINE__, + "error accessing file \"%s\": %s", + tmp_pathspec, nonnull (strerror (errno))); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal (__FILE__, __LINE__, + "could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +void +lt_debugprintf (const char *file, int line, const char *fmt, ...) +{ + va_list args; + if (lt_debug) + { + (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); + } +} + +static void +lt_error_core (int exit_status, const char *file, + int line, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *file, int line, const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + va_end (ap); +} + +static const char * +nonnull (const char *s) +{ + return s ? s : "(null)"; +} + +static const char * +nonempty (const char *s) +{ + return (s && !*s) ? "(empty)" : nonnull (s); +} + +void +lt_setenv (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_setenv) setting '%s' to '%s'\n", + nonnull (name), nonnull (value)); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; + + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); + + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; + + quoted_string = XMALLOC (char, length + 1); + + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; + + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; + + return new_argv; +} +EOF + ;; + esac + + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -n -e ' +s/^\(.\{79\}\)\(..*\)/\1\ +\2/ +h +s/\([\\"]\)/\\\1/g +s/$/\\n/ +s/\([^\n]*\).*/ fputs ("\1", f);/p +g +D' + cat <<"EOF" +} +EOF +} +# end: func_emit_cwrapperexe_src + +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $opt_debug + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +} + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + bindir= + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + bindir) + bindir="$arg" + prev= + continue + ;; + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + func_append dlfiles " $arg" + else + func_append dlprefiles " $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) func_append deplibs " $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# func_append moreargs " $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) func_append rpath " $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) func_append xrpath " $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + func_append weak_libs " $arg" + prev= + continue + ;; + xcclinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -bindir) + prev=bindir + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname "-L" '' "$arg" + if test -z "$func_stripname_result"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "* | *" $arg "*) + # Will only happen for absolute or sysroot arguments + ;; + *) + # Preserve sysroot, but never include relative directories + case $dir in + [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; + *) func_append deplibs " -L$dir" ;; + esac + func_append lib_search_path " $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) func_append dllsearchpath ":$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + func_append deplibs " System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + func_append deplibs " $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot|--sysroot) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) func_append new_inherited_linker_flags " $arg" ;; + esac + continue + ;; + + -multi_module) + single_module="${wl}-multi_module" + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + =*) + func_stripname '=' '' "$dir" + dir=$lt_sysroot$func_stripname_result + ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $func_quote_for_eval_result" + func_append compiler_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $wl$func_quote_for_eval_result" + func_append compiler_flags " $wl$func_quote_for_eval_result" + func_append linker_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # Flags to be passed through unchanged, with rationale: + # -64, -mips[0-9] enable 64-bit mode for the SGI compiler + # -r[0-9][0-9]* specify processor for the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler + # +DA*, +DD* enable 64-bit mode for the HP compiler + # -q* compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* architecture-specific flags for GCC + # -F/path path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + # --sysroot=* for sysroot support + # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ + -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + func_append compiler_flags " $arg" + continue + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + *.$objext) + # A standard object. + func_append objs " $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + func_append deplibs " $arg" + func_append old_deplibs " $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + func_resolve_sysroot "$arg" + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + func_append dlfiles " $func_resolve_sysroot_result" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + func_append dlprefiles " $func_resolve_sysroot_result" + prev= + else + func_append deplibs " $func_resolve_sysroot_result" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname="$func_basename_result" + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + func_to_tool_file "$output_objdir/" + tool_output_objdir=$func_to_tool_file_result + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_preserve_dup_deps ; then + case "$libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append libs " $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + esac + func_append pre_post_deps " $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) + libs="$deplibs %DEPLIBS%" + test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; + esac + fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + func_resolve_sysroot "$lib" + case $lib in + *.la) func_source "$func_resolve_sysroot_result" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + func_basename "$deplib" + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; + *) func_append deplibs " $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append compiler_flags " $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) + func_resolve_sysroot "$deplib" + lib=$func_resolve_sysroot_result + ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." + else + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + func_append newdlprefiles " $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append newdlfiles " $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + + if test "$found" = yes || test -f "$lib"; then : + else + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && func_append dlfiles " $dlopen" + test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. + func_append convenience " $ladir/$objdir/$old_library" + func_append old_convenience " $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + if test -n "$old_library" && + { test "$prefer_static_libs" = yes || + test "$prefer_static_libs,$installed" = "built,no"; }; then + linklib=$old_library + else + for l in $old_library $library_names; do + linklib="$l" + done + fi + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + func_append dlprefiles " $lib $dependency_libs" + else + func_append newdlfiles " $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir="$ladir" + fi + ;; + esac + func_basename "$lib" + laname="$func_basename_result" + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$lt_sysroot$libdir" + absdir="$lt_sysroot$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi + case "$host" in + # special handling for platforms with PE-DLLs. + *cygwin* | *mingw* | *cegcc* ) + # Linker will automatically link against shared library if both + # static and shared are present. Therefore, ensure we extract + # symbols from the import library if a shared library is present + # (otherwise, the dlopen module name will be incorrect). We do + # this by putting the import library name into $newdlprefiles. + # We recover the dlopen module name by 'saving' the la file + # name in a special purpose variable, and (later) extracting the + # dlname from the la file. + if test -n "$dlname"; then + func_tr_sh "$dir/$linklib" + eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" + func_append newdlprefiles " $dir/$linklib" + else + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + fi + ;; + * ) + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + func_append newdlprefiles " $dir/$dlname" + else + func_append newdlprefiles " $dir/$linklib" + fi + ;; + esac + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + func_append newlib_search_path " $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) func_append temp_rpath "$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + func_append notinst_deplibs " $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + func_append notinst_deplibs " $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + echo + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$opt_mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$absdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) func_append compile_shlibpath "$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$opt_mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + $ECHO "*** Warning: This system can not link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) func_append xrpath " $temp_xrpath";; + esac;; + *) func_append temp_deplibs " $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + func_append newlib_search_path " $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result";; + *) func_resolve_sysroot "$deplib" ;; + esac + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $func_resolve_sysroot_result "*) + func_append specialdeplibs " $func_resolve_sysroot_result" ;; + esac + fi + func_append tmp_libs " $func_resolve_sysroot_result" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + path= + case $deplib in + -L*) path="$deplib" ;; + *.la) + func_resolve_sysroot "$deplib" + deplib=$func_resolve_sysroot_result + func_dirname "$deplib" "" "." + dir=$func_dirname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of \`$dir'" + absdir="$dir" + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) + path="-L$absdir/$objdir" + ;; + esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) func_append lib_search_path " $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) func_append tmp_libs " $deplib" ;; + esac + ;; + *) func_append tmp_libs " $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + func_append tmp_libs " $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + func_append objs "$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + func_append libobjs " $objs" + fi + fi + + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + shift + IFS="$save_ifs" + + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + # correct linux to gnu/linux during the next big refactor + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|qnx|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + *) + func_fatal_configuration "$modename: unknown library version type \`$version_type'" + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current" + ;; + + irix | nonstopux) + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) # correct to gnu/linux during the next big refactor + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + func_append verstring ":${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + + *) + func_fatal_configuration "unknown library version type \`$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + func_warning "undefined symbols not allowed in $host shared libraries" + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + fi + + func_generate_dlsyms "$libname" "$libname" "yes" + func_append libobjs " $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$opt_mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + func_append removelist " $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + func_append oldlibs " $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + func_replace_sysroot "$libdir" + func_append temp_xrpath " -R$func_replace_sysroot_result" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) func_append dlfiles " $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) func_append dlprefiles " $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + func_append deplibs " System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + func_append deplibs " -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c </dev/null` + $nocaseglob + else + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + fi + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + func_append newdeplibs " $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + done + fi + case $tmp_deplibs in + *[!\ \ ]*) + echo + if test "X$deplibs_check_method" = "Xnone"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + ;; + esac + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + deplibs="$new_libs" + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + # Remove ${wl} instances when linking with ld. + # FIXME: should test the right _cmds variable. + case $archive_cmds in + *\$LD\ *) wl= ;; + esac + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + func_replace_sysroot "$libdir" + libdir=$func_replace_sysroot_result + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append dep_rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + linknames= + for link + do + func_append linknames " $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + func_append delfiles " $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd1 in $cmds; do + IFS="$save_ifs" + # Take the normal branch if the nm_file_list_spec branch + # doesn't work or if tool conversion is not needed. + case $nm_file_list_spec~$to_tool_file_cmd in + *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) + try_normal_branch=yes + eval cmd=\"$cmd1\" + func_len " $cmd" + len=$func_len_result + ;; + *) + try_normal_branch=no + ;; + esac + if test "$try_normal_branch" = yes \ + && { test "$len" -lt "$max_cmd_len" \ + || test "$max_cmd_len" -le -1; } + then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + elif test -n "$nm_file_list_spec"; then + func_basename "$output" + output_la=$func_basename_result + save_libobjs=$libobjs + save_output=$output + output=${output_objdir}/${output_la}.nm + func_to_tool_file "$output" + libobjs=$nm_file_list_spec$func_to_tool_file_result + func_append delfiles " $output" + func_verbose "creating $NM input file list: $output" + for obj in $save_libobjs; do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > "$output" + eval cmd=\"$cmd1\" + func_show_eval "$cmd" 'exit $?' + output=$save_output + libobjs=$save_libobjs + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + func_append tmp_deplibs " $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + func_append linker_flags " $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + func_basename "$output" + output_la=$func_basename_result + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + echo ')' >> $output + func_append delfiles " $output" + func_to_tool_file "$output" + output=$func_to_tool_file_result + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + func_append delfiles " $output" + func_to_tool_file "$output" + output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" + else + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=" $obj" + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + func_append delfiles " $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + else + gentop="$output_objdir/${obj}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # If we're not building shared, we need to use non_pic_objs + test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" + + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" + + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + func_append compile_command " ${wl}-bind_at_load" + func_append finalize_command " ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + + func_append compile_command " $compile_deplibs" + func_append finalize_command " $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) func_append dllsearchpath ":$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) func_append finalize_perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + fi + + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi + + wrappers_required=yes + case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=no + ;; + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then + # Replace the output file specification. + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + + exit $exit_status + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + func_append rpath "$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output_objdir/$outputname" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Now create the wrapper script. + func_verbose "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save $symfileobj" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + func_append oldobjs " $symfileobj" + fi + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $addlibs + func_append oldobjs " $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append oldobjs " $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + echo "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + func_append oldobjs " $gentop/$newobj" + ;; + *) func_append oldobjs " $obj" ;; + esac + done + fi + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + elif test -n "$archiver_list_spec"; then + func_verbose "using command file archive linking..." + for obj in $oldobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > $output_objdir/$libname.libcmd + func_to_tool_file "$output_objdir/$libname.libcmd" + oldobjs=" $archiver_list_spec$func_to_tool_file_result" + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' + done + + test -n "$generated" && \ + func_show_eval "${RM}r$generated" + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + func_verbose "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name="$func_basename_result" + func_resolve_sysroot "$deplib" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" + ;; + -L*) + func_stripname -L '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -L$func_replace_sysroot_result" + ;; + -R*) + func_stripname -R '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -R$func_replace_sysroot_result" + ;; + *) func_append newdependency_libs " $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + ;; + *) func_append newdlfiles " $lib" ;; + esac + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlfiles " $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlprefiles " $abs" + done + dlprefiles="$newdlprefiles" + fi + $RM $output + # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test "x$bindir" != x ; + then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} + +{ test "$opt_mode" = link || test "$opt_mode" = relink; } && + func_mode_link ${1+"$@"} + + +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) func_append RM " $arg"; rmforce=yes ;; + -*) func_append RM " $arg" ;; + *) func_append files " $arg" ;; + esac + done + + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" + + rmdirs= + + for file in $files; do + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + odir="$objdir" + else + odir="$dir/$objdir" + fi + func_basename "$file" + name="$func_basename_result" + test "$opt_mode" = uninstall && odir="$dir" + + # Remember odir for removal later, being careful to avoid duplicates + if test "$opt_mode" = clean; then + case " $rmdirs " in + *" $odir "*) ;; + *) func_append rmdirs " $odir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then + func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + func_append rmfiles " $odir/$n" + done + test -n "$old_library" && func_append rmfiles " $odir/$old_library" + + case "$opt_mode" in + clean) + case " $library_names " in + *" $dlname "*) ;; + *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + esac + test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && + test "$pic_object" != none; then + func_append rmfiles " $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + func_append rmfiles " $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$opt_mode" = clean ; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + func_append rmfiles " $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + func_append rmfiles " $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + func_append rmfiles " $odir/$name $odir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + func_append rmfiles " $odir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + func_append rmfiles " $odir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +} + +{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && + func_mode_uninstall ${1+"$@"} + +test -z "$opt_mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$opt_mode'" + +if test -n "$exec_cmd"; then + eval exec "$exec_cmd" + exit $EXIT_FAILURE +fi + +exit $exit_status + + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: +# vi:sw=2 + diff --git a/config.aux/missing b/config.aux/missing new file mode 100755 index 0000000..86a8fc3 --- /dev/null +++ b/config.aux/missing @@ -0,0 +1,331 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2012-01-06.13; # UTC + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case $1 in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) + # Not GNU programs, they don't have --version. + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case $program in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case $f in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te*) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison*|yacc*) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if test ! -f y.tab.h; then + echo >y.tab.h + fi + if test ! -f y.tab.c; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex*|flex*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if test ! -f lex.yy.c; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit $? + fi + ;; + + makeinfo*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 + touch $file + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/config.h.in b/config.h.in new file mode 100644 index 0000000..53b5fcf --- /dev/null +++ b/config.h.in @@ -0,0 +1,197 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Define to configure invocation command line options */ +#undef BUILD_OPTS + +/* We have build time */ +#undef BUILD_TIME + +/* Define to canonical build */ +#undef CANONICAL_BUILD + +/* Define to canonical host */ +#undef CANONICAL_HOST + +/* Define to canonical target */ +#undef CANONICAL_TARGET + +/* Define to compiler */ +#undef CC + +/* Define to compiler flags */ +#undef CFLAGS + +/* Define to 1 if translation of program messages to the user's native + language is requested. */ +#undef ENABLE_NLS + +/* Define to the gettext package name */ +#undef GETTEXT_PACKAGE + +/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the + CoreFoundation framework. */ +#undef HAVE_CFLOCALECOPYCURRENT + +/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in + the CoreFoundation framework. */ +#undef HAVE_CFPREFERENCESCOPYAPPVALUE + +/* Define if the GNU dcgettext() function is already present or preinstalled. + */ +#undef HAVE_DCGETTEXT + +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + +/* Define if the GNU gettext() function is already present or preinstalled. */ +#undef HAVE_GETTEXT + +/* Define if you have the iconv() function and it works. */ +#undef HAVE_ICONV + +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_LOCALE_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the `memset' function. */ +#undef HAVE_MEMSET + +/* Define to 1 if you have the `setlocale' function. */ +#undef HAVE_SETLOCALE + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the `strrchr' function. */ +#undef HAVE_STRRCHR + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#undef LT_OBJDIR + +/* Define for backwards-compatibility with Lua 5.1 */ +#undef LUA_COMPAT_MODULE + +/* Define to 1 if your C compiler doesn't accept -c and -o together. */ +#undef NO_MINUS_C_MINUS_O + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* We have scriptsdir */ +#undef SCRIPTSDIR + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Enable extensions on AIX 3, Interix. */ +#ifndef _ALL_SOURCE +# undef _ALL_SOURCE +#endif +/* Enable GNU extensions on systems that have them. */ +#ifndef _GNU_SOURCE +# undef _GNU_SOURCE +#endif +/* Enable threading extensions on Solaris. */ +#ifndef _POSIX_PTHREAD_SEMANTICS +# undef _POSIX_PTHREAD_SEMANTICS +#endif +/* Enable extensions on HP NonStop. */ +#ifndef _TANDEM_SOURCE +# undef _TANDEM_SOURCE +#endif +/* Enable general extensions on Solaris. */ +#ifndef __EXTENSIONS__ +# undef __EXTENSIONS__ +#endif + + +/* Version number of package */ +#undef VERSION + +/* We have versionfile */ +#undef VERSIONFILE + +/* Version major/minor */ +#undef VERSION_MM + +/* We have version number from gen-ver.sh */ +#undef VN + +/* Define to 1 if on MINIX. */ +#undef _MINIX + +/* Define to 2 if the system does not provide POSIX.1 features except with + this defined. */ +#undef _POSIX_1_SOURCE + +/* Define to 1 if you need to in order for `stat' and other things to work. */ +#undef _POSIX_SOURCE + +/* Define for Solaris 2.5.1 so the uint32_t typedef from , + , or is not used. If the typedef were allowed, the + #define below would cause a syntax error. */ +#undef _UINT32_T + +/* Define for Solaris 2.5.1 so the uint64_t typedef from , + , or is not used. If the typedef were allowed, the + #define below would cause a syntax error. */ +#undef _UINT64_T + +/* Define for Solaris 2.5.1 so the uint8_t typedef from , + , or is not used. If the typedef were allowed, the + #define below would cause a syntax error. */ +#undef _UINT8_T + +/* Define to the type of an unsigned integer type of width exactly 32 bits if + such a type exists and the standard includes do not define it. */ +#undef uint32_t + +/* Define to the type of an unsigned integer type of width exactly 64 bits if + such a type exists and the standard includes do not define it. */ +#undef uint64_t + +/* Define to the type of an unsigned integer type of width exactly 8 bits if + such a type exists and the standard includes do not define it. */ +#undef uint8_t diff --git a/configure b/configure new file mode 100755 index 0000000..5ffe121 --- /dev/null +++ b/configure @@ -0,0 +1,19433 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for libquvi 0.9.4. +# +# Report bugs to . +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: http://quvi.sf.net/bugs/ about your system, including +$0: any error possibly output before this message. Then +$0: install a modern shell, or manually run the script +$0: under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + +SHELL=${CONFIG_SHELL-/bin/sh} + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='libquvi' +PACKAGE_TARNAME='libquvi' +PACKAGE_VERSION='0.9.4' +PACKAGE_STRING='libquvi 0.9.4' +PACKAGE_BUGREPORT='http://quvi.sf.net/bugs/' +PACKAGE_URL='http://quvi.sf.net/' + +ac_unique_file="src/api/new.c" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +gt_needs= +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +WITH_MANUAL_FALSE +WITH_MANUAL_TRUE +VN_C +libquvi_scripts_LIBS +libquvi_scripts_CFLAGS +LIBGCRYPT_LIBS +LIBGCRYPT_CFLAGS +LIBGCRYPT_CONFIG +glib_LIBS +glib_CFLAGS +libcurl_LIBS +libcurl_CFLAGS +libproxy_LIBS +libproxy_CFLAGS +liblua_LIBS +liblua_CFLAGS +PKG_CONFIG_LIBDIR +PKG_CONFIG_PATH +PKG_CONFIG +HAVE_VALGRIND_FALSE +HAVE_VALGRIND_TRUE +VALGRIND +BUILD_TIME +DATE +HAVE_A2X_FALSE +HAVE_A2X_TRUE +A2X +HAVE_DOXYGEN_FALSE +HAVE_DOXYGEN_TRUE +DOXYGEN +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +RANLIB +DLLTOOL +OBJDUMP +LN_S +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +SED +LIBTOOL +GETTEXT_PACKAGE +POSUB +LTLIBINTL +LIBINTL +INTLLIBS +LTLIBICONV +LIBICONV +INTL_MACOSX_LIBS +XGETTEXT_EXTRA_OPTIONS +MSGMERGE +XGETTEXT_015 +XGETTEXT +GMSGFMT_015 +MSGFMT_015 +GMSGFMT +MSGFMT +GETTEXT_MACRO_VERSION +USE_NLS +ac_ct_AR +AR +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +EGREP +GREP +CPP +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +target_os +target_vendor +target_cpu +target +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +LT_AGE +LT_REV +LT_CUR +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_dependency_tracking +enable_silent_rules +enable_nls +with_gnu_ld +enable_rpath +with_libiconv_prefix +with_libintl_prefix +enable_static +enable_shared +with_pic +enable_fast_install +with_sysroot +enable_libtool_lock +with_libgcrypt_prefix +with_scriptsdir +with_manual +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP +PKG_CONFIG +PKG_CONFIG_PATH +PKG_CONFIG_LIBDIR +liblua_CFLAGS +liblua_LIBS +libproxy_CFLAGS +libproxy_LIBS +libcurl_CFLAGS +libcurl_LIBS +glib_CFLAGS +glib_LIBS +libquvi_scripts_CFLAGS +libquvi_scripts_LIBS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures libquvi 0.9.4 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/libquvi] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of libquvi 0.9.4:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors + --enable-silent-rules less verbose build output (undo: `make V=1') + --disable-silent-rules verbose build output (undo: `make V=0') + --disable-nls do not use Native Language Support + --disable-rpath do not hardcode runtime library paths + --enable-static[=PKGS] build static libraries [default=no] + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-gnu-ld assume the C compiler uses GNU ld default=no + --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib + --without-libiconv-prefix don't search for libiconv in includedir and libdir + --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib + --without-libintl-prefix don't search for libintl in includedir and libdir + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-sysroot=DIR Search for dependent libraries within DIR + (or the compiler's sysroot if not specified). + --with-libgcrypt-prefix=PFX + prefix where LIBGCRYPT is installed (optional) + --with-scriptsdir=DIR Set libquvi-scripts directory to DIR. This negates + the libquvi-scripts check. DIR is assumed to contain + the files installed with libquvi-scripts to the + $prefix/share/libquvi-scripts/ directory. + --with-manual install manual pages [default=yes] + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor + PKG_CONFIG path to pkg-config utility + PKG_CONFIG_PATH + directories to add to pkg-config's search path + PKG_CONFIG_LIBDIR + path overriding pkg-config's built-in search path + liblua_CFLAGS + C compiler flags for liblua, overriding pkg-config + liblua_LIBS linker flags for liblua, overriding pkg-config + libproxy_CFLAGS + C compiler flags for libproxy, overriding pkg-config + libproxy_LIBS + linker flags for libproxy, overriding pkg-config + libcurl_CFLAGS + C compiler flags for libcurl, overriding pkg-config + libcurl_LIBS + linker flags for libcurl, overriding pkg-config + glib_CFLAGS C compiler flags for glib, overriding pkg-config + glib_LIBS linker flags for glib, overriding pkg-config + libquvi_scripts_CFLAGS + C compiler flags for libquvi_scripts, overriding pkg-config + libquvi_scripts_LIBS + linker flags for libquvi_scripts, overriding pkg-config + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +libquvi home page: . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +libquvi configure 0.9.4 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} +( $as_echo "## --------------------------------------- ## +## Report this to http://quvi.sf.net/bugs/ ## +## --------------------------------------- ##" + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_c_find_uintX_t LINENO BITS VAR +# ------------------------------------ +# Finds an unsigned integer type with width BITS, setting cache variable VAR +# accordingly. +ac_fn_c_find_uintX_t () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5 +$as_echo_n "checking for uint$2_t... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + # Order is important - never check a type that is potentially smaller + # than half of the expected target width. + for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \ + 'unsigned long long int' 'unsigned short int' 'unsigned char'; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !((($ac_type) -1 >> ($2 / 2 - 1)) >> ($2 / 2 - 1) == 3)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + case $ac_type in #( + uint$2_t) : + eval "$3=yes" ;; #( + *) : + eval "$3=\$ac_type" ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if eval test \"x\$"$3"\" = x"no"; then : + +else + break +fi + done +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_find_uintX_t +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by libquvi $as_me 0.9.4, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +gt_needs="$gt_needs " +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + +cat >>confdefs.h <<_ACEOF +#define BUILD_OPTS "$@" +_ACEOF + + +# Interface +LT_CUR=8 +LT_REV=0 +LT_AGE=0 + + + + + +ac_config_headers="$ac_config_headers config.h" + +ac_aux_dir= +for ac_dir in config.aux "$srcdir"/config.aux; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in config.aux \"$srcdir\"/config.aux" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + + + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5 +$as_echo_n "checking target system type... " >&6; } +if ${ac_cv_target+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$target_alias" = x; then + ac_cv_target=$ac_cv_host +else + ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5 +$as_echo "$ac_cv_target" >&6; } +case $ac_cv_target in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;; +esac +target=$ac_cv_target +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_target +shift +target_cpu=$1 +target_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +target_os=$* +IFS=$ac_save_IFS +case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +test -n "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default" +if test "x$ac_cv_header_minix_config_h" = xyes; then : + MINIX=yes +else + MINIX= +fi + + + if test "$MINIX" = yes; then + +$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h + + +$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h + + +$as_echo "#define _MINIX 1" >>confdefs.h + + fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5 +$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; } +if ${ac_cv_safe_to_define___extensions__+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +# define __EXTENSIONS__ 1 + $ac_includes_default +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_safe_to_define___extensions__=yes +else + ac_cv_safe_to_define___extensions__=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5 +$as_echo "$ac_cv_safe_to_define___extensions__" >&6; } + test $ac_cv_safe_to_define___extensions__ = yes && + $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h + + $as_echo "#define _ALL_SOURCE 1" >>confdefs.h + + $as_echo "#define _GNU_SOURCE 1" >>confdefs.h + + $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h + + $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h + + + + +cat >>confdefs.h <<_ACEOF +#define CANONICAL_TARGET "$target" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define CANONICAL_BUILD "$build" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define CANONICAL_HOST "$host" +_ACEOF + + +# GNU Automake 1.13 spews a warning about AM_GNU_GETTEXT (0.18.1, +# 0.18.2) using the deprecated AM_PROG_MKDIR_P macro. Do not specify +# '-Werror` in the options to work around this. +am__api_version='1.11' + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Just in case +sleep 1 +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; +esac + +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken +alias in your environment" "$LINENO" 5 + fi + + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='libquvi' + VERSION='0.9.4' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a ustar tar archive" >&5 +$as_echo_n "checking how to create a ustar tar archive... " >&6; } +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar plaintar pax cpio none' +_am_tools=${am_cv_prog_tar_ustar-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + { echo "$as_me:$LINENO: $_am_tar --version" >&5 + ($_am_tar --version) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && break + done + am__tar="$_am_tar --format=ustar -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=ustar -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x ustar -w "$$tardir"' + am__tar_='pax -L -x ustar -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H ustar -L' + am__tar_='find "$tardir" -print | cpio -o -H ustar -L' + am__untar='cpio -i -H ustar -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_ustar}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + { echo "$as_me:$LINENO: tardir=conftest.dir && eval $am__tar_ >conftest.tar" >&5 + (tardir=conftest.dir && eval $am__tar_ >conftest.tar) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + rm -rf conftest.dir + if test -s conftest.tar; then + { echo "$as_me:$LINENO: $am__untar &5 + ($am__untar &5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + grep GrepMe conftest.dir/file >/dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +if ${am_cv_prog_tar_ustar+:} false; then : + $as_echo_n "(cached) " >&6 +else + am_cv_prog_tar_ustar=$_am_tool +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_ustar" >&5 +$as_echo "$am_cv_prog_tar_ustar" >&6; } + + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + d