diff --git libpng-1.2.53rc02/aclocal.m4 ag/aclocal.m4
--- libpng-1.2.53rc02/aclocal.m4 2015-02-21 13:47:15.000000000 -0600
+++ ag/aclocal.m4 2015-02-21 13:51:07.472133259 -0600
@@ -1,11 +1,11 @@
-# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.15 -*- Autoconf -*-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
@@ -17,56 +17,48 @@ m4_ifndef([AC_AUTOCONF_VERSION],
m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
[m4_warning([this file was generated for autoconf 2.69.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.])])
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
m4_define([_LT_COPYING], [dnl
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see .
])
-# serial 57 LT_INIT
+# serial 58 LT_INIT
# LT_PREREQ(VERSION)
# ------------------
# Complain and exit if this libtool version is less that VERSION.
m4_defun([LT_PREREQ],
[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
[m4_default([$3],
@@ -84,17 +76,17 @@ m4_defun([_LT_CHECK_BUILDDIR],
AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
esac
])
# LT_INIT([OPTIONS])
# ------------------
AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
AC_BEFORE([$0], [LTDL_INIT])dnl
m4_require([_LT_CHECK_BUILDDIR])dnl
dnl Autoconf doesn't catch unexpanded LT_ macros by default:
m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
@@ -108,17 +100,17 @@ AC_REQUIRE([LTOBSOLETE_VERSION])dnl
m4_require([_LT_PROG_LTMAIN])dnl
_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
dnl Parse OPTIONS
_LT_SET_OPTIONS([$0], [$1])
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
_LT_SETUP
# Only expand once:
@@ -128,36 +120,53 @@ m4_define([LT_INIT])
# Old names:
AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+# _LT_PREPARE_CC_BASENAME
+# -----------------------
+m4_defun([_LT_PREPARE_CC_BASENAME], [
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in @S|@*""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+])# _LT_PREPARE_CC_BASENAME
+
+
# _LT_CC_BASENAME(CC)
# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
+# but that macro is also expanded into generated libtool script, which
+# arranges for $SED and $ECHO to be set by different means.
m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+[m4_require([_LT_PREPARE_CC_BASENAME])dnl
+AC_REQUIRE([_LT_DECL_SED])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+func_cc_basename $1
+cc_basename=$func_cc_basename_result
])
# _LT_FILEUTILS_DEFAULTS
# ----------------------
# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
m4_defun([_LT_FILEUTILS_DEFAULTS],
[: ${CP="cp -f"}
: ${MV="mv -f"}
: ${RM="rm -f"}
])# _LT_FILEUTILS_DEFAULTS
# _LT_SETUP
@@ -194,56 +203,57 @@ m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
m4_require([_LT_CMD_RELOAD])dnl
m4_require([_LT_CHECK_MAGIC_METHOD])dnl
m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
m4_require([_LT_CMD_OLD_ARCHIVE])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_WITH_SYSROOT])dnl
+m4_require([_LT_CMD_TRUNCATE])dnl
_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
])
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
_LT_CHECK_OBJDIR
m4_require([_LT_TAG_COMPILER])dnl
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
+ if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
;;
esac
# Global variables:
ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o
@@ -286,31 +296,31 @@ delay_variable_subst='s/\\\\\\\\\\\$/\\\
delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'
])
# _LT_PROG_LTMAIN
# ---------------
-# Note that this code is called both from `configure', and `config.status'
+# Note that this code is called both from 'configure', and 'config.status'
# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# 'config.status' has no value for ac_aux_dir unless we are using Automake,
# so we pass a copy along to make sure it has a sensible value anyway.
m4_defun([_LT_PROG_LTMAIN],
[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
])# _LT_PROG_LTMAIN
# So that we can recreate a full libtool script including additional
# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
+# in macros and then make a single call at the end using the 'libtool'
# label.
# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
# ----------------------------------------
# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
m4_define([_LT_CONFIG_LIBTOOL_INIT],
[m4_ifval([$1],
@@ -432,18 +442,18 @@ m4_define([lt_decl_all_varnames],
m4_define([_lt_decl_all_varnames],
[lt_join($@, lt_decl_varnames_tagged([$1],
lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
])
# _LT_CONFIG_STATUS_DECLARE([VARNAME])
# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'. VARNAME
+# Quote a variable value, and forward it to 'config.status' so that its
+# declaration there will have the same value as in 'configure'. VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
# _LT_CONFIG_STATUS_DECLARATIONS
# ------------------------------
# We delimit libtool config variables with single quotes, so when
@@ -457,17 +467,17 @@ m4_defun([_LT_CONFIG_STATUS_DECLARATIONS
[m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
# _LT_LIBTOOL_TAGS
# ----------------
# Output comment and list of tags supported by the script
m4_defun([_LT_LIBTOOL_TAGS],
[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
+available_tags='_LT_TAGS'dnl
])
# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
# -----------------------------------
# Extract the dictionary values for VARNAME (optionally with TAG) and
# expand to a commented shell variable setting:
#
@@ -485,17 +495,17 @@ m4_case(m4_quote(lt_dict_fetch([lt_decl_
[_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
])
# _LT_LIBTOOL_CONFIG_VARS
# -----------------------
# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
# section) are produced by _LT_LIBTOOL_TAG_VARS.
m4_defun([_LT_LIBTOOL_CONFIG_VARS],
[m4_foreach([_lt_var],
m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
[m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
@@ -511,18 +521,18 @@ m4_define([_LT_LIBTOOL_TAG_VARS],
m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
# _LT_CONFIG_COMMANDS
# -------------------
# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
# variables for single and double quote escaping we saved from calls
# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'. Finally, any additional code accumulated
+# into 'config.status', and then the shell code to quote escape them in
+# for loops in 'config.status'. Finally, any additional code accumulated
# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
m4_defun([_LT_CONFIG_COMMANDS],
[AC_PROVIDE_IFELSE([LT_OUTPUT],
dnl If the libtool generation code has been placed in $CONFIG_LT,
dnl instead of duplicating it all over again into config.status,
dnl then we will have config.status run $CONFIG_LT later, so it
dnl needs to know what name is stored there:
[AC_CONFIG_COMMANDS([libtool],
@@ -558,46 +568,46 @@ func_fallback_echo ()
_LTECHO_EOF'
}
# Quote evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_quote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
;;
esac
done
# Double-quote double-evaled strings.
for var in lt_decl_all_varnames([[ \
]], lt_decl_dquote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
;;
esac
done
_LT_OUTPUT_LIBTOOL_INIT
])
# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
# ------------------------------------
# Generate a child script FILE with all initialization necessary to
# reuse the environment learned by the parent script, and make the
# file executable. If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins. After this
+# '#!' sequence but before initialization text begins. After this
# macro, additional text can be appended to FILE to form the body of
# the child script. The macro ends with non-zero status if the
# file could not be fully written (such as if the disk is full).
m4_ifdef([AS_INIT_GENERATED],
[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
[m4_defun([_LT_GENERATED_FILE_INIT],
[m4_require([AS_PREPARE])]dnl
[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
@@ -609,17 +619,17 @@ $2
SHELL=\${CONFIG_SHELL-$SHELL}
export SHELL
_ASEOF
cat >>$1 <<\_ASEOF || lt_write_fail=1
AS_SHELL_SANITIZE
_AS_PREPARE
exec AS_MESSAGE_FD>&1
_ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
+test 0 = "$lt_write_fail" && chmod +x $1[]dnl
m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
# LT_OUTPUT
# ---------
# This macro allows early generation of the libtool script (before
# AC_OUTPUT is called), incase it is used in configure for compilation
# tests.
AC_DEFUN([LT_OUTPUT],
@@ -632,17 +642,17 @@ cat >>"$CONFIG_LT" <<\_LTEOF
lt_cl_silent=false
exec AS_MESSAGE_LOG_FD>>config.log
{
echo
AS_BOX([Running $as_me.])
} >&AS_MESSAGE_LOG_FD
lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
+'$as_me' creates a local libtool stub from the current configuration,
for use in further configure time tests before the real libtool is
generated.
Usage: $[0] [[OPTIONS]]
-h, --help print this help, then exit
-V, --version print version number, then exit
-q, --quiet do not print progress messages
@@ -654,33 +664,33 @@ lt_cl_version="\
m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
configured by $[0], generated by m4_PACKAGE_STRING.
Copyright (C) 2011 Free Software Foundation, Inc.
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."
-while test $[#] != 0
+while test 0 != $[#]
do
case $[1] in
--version | --v* | -V )
echo "$lt_cl_version"; exit 0 ;;
--help | --h* | -h )
echo "$lt_cl_help"; exit 0 ;;
--debug | --d* | -d )
debug=: ;;
--quiet | --q* | --silent | --s* | -q )
lt_cl_silent=: ;;
-*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
*) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
esac
shift
done
if $lt_cl_silent; then
exec AS_MESSAGE_FD>/dev/null
fi
_LTEOF
@@ -696,17 +706,17 @@ AS_EXIT(0)
_LTEOF
chmod +x "$CONFIG_LT"
# configure is writing to config.log, but config.lt does its own redirection,
# appending to config.log, which fails on DOS, as config.log is still kept
# open by configure. Here we exec the FD to /dev/null, effectively closing
# config.log, so it can be properly (re)opened and appended to by config.lt.
lt_cl_success=:
-test "$silent" = yes &&
+test yes = "$silent" &&
lt_config_lt_args="$lt_config_lt_args --quiet"
exec AS_MESSAGE_LOG_FD>/dev/null
$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
exec AS_MESSAGE_LOG_FD>>config.log
$lt_cl_success || AS_EXIT(1)
])# LT_OUTPUT
@@ -716,69 +726,82 @@ $lt_cl_success || AS_EXIT(1)
# default configuration from the untagged config vars. Otherwise add code
# to config.status for appending the configuration named by TAG from the
# matching tagged config vars.
m4_defun([_LT_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_CONFIG_SAVE_COMMANDS([
m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
m4_if(_LT_TAG, [C], [
- # See if we are running on zsh, and set the options which allow our
+ # See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
+ if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
- cfgfile="${ofile}T"
+ cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
_LT_COPYING
_LT_LIBTOOL_TAGS
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
# ### BEGIN LIBTOOL CONFIG
_LT_LIBTOOL_CONFIG_VARS
_LT_LIBTOOL_TAG_VARS
# ### END LIBTOOL CONFIG
_LT_EOF
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_PREPARE_MUNGE_PATH_LIST
+_LT_PREPARE_CC_BASENAME
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
_LT_EOF
;;
esac
_LT_PROG_LTMAIN
# We use sed instead of cat because bash on DJGPP gets confused if
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
- _LT_PROG_REPLACE_SHELLFNS
-
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
],
[cat <<_LT_EOF >> "$ofile"
dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
dnl in a comment (ie after a #).
@@ -786,17 +809,16 @@ dnl in a comment (ie after a #).
_LT_LIBTOOL_TAG_VARS(_LT_TAG)
# ### END LIBTOOL TAG CONFIG: $1
_LT_EOF
])dnl /m4_if
],
[m4_if([$1], [], [
PACKAGE='$PACKAGE'
VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'], [])
])dnl /_LT_CONFIG_SAVE_COMMANDS
])# _LT_CONFIG
# LT_SUPPORTED_TAG(TAG)
# ---------------------
@@ -983,17 +1005,17 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECK
[Tool to manipulate fat objects and archives on Mac OS X])
_LT_DECL([], [OTOOL], [1],
[ldd/readelf like tool for Mach-O binaries on Mac OS X])
_LT_DECL([], [OTOOL64], [1],
[ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
[lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
+ if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
# link flags.
rm -rf libconftest.dylib*
echo "int foo(void){return 1;}" > conftest.c
echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
@@ -1001,17 +1023,17 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECK
-dynamiclib -Wl,-single_module conftest.c 2>conftest.err
_lt_result=$?
# If there is a non-empty error log, and "single_module"
# appears in it, assume the flag caused a linker warning
if test -s conftest.err && $GREP single_module conftest.err; then
cat conftest.err >&AS_MESSAGE_LOG_FD
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
- elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
fi
rm -rf libconftest.dylib*
rm -f conftest.*
fi])
@@ -1019,17 +1041,17 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECK
[lt_cv_ld_exported_symbols_list],
[lt_cv_ld_exported_symbols_list=no
save_LDFLAGS=$LDFLAGS
echo "_main" > conftest.sym
LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
[lt_cv_ld_exported_symbols_list=yes],
[lt_cv_ld_exported_symbols_list=no])
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
])
AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
[lt_cv_ld_force_load=no
cat > conftest.c << _LT_EOF
int forced_loaded() { return 2;}
_LT_EOF
echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
@@ -1041,52 +1063,52 @@ _LT_EOF
cat > conftest.c << _LT_EOF
int main() { return 0;}
_LT_EOF
echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&AS_MESSAGE_LOG_FD
- elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
fi
rm -f conftest.err libconftest.a conftest conftest.c
rm -rf conftest.dSYM
])
case $host_os in
rhapsody* | darwin1.[[012]])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[[012]]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]][[,.]]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
fi
;;
esac
])
@@ -1096,39 +1118,39 @@ _LT_EOF
# Checks for linker and compiler features on darwin
m4_defun([_LT_DARWIN_LINKER_FEATURES],
[
m4_require([_LT_REQUIRED_DARWIN_CHECKS])
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ if test yes = "$lt_cv_ld_force_load"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
[FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=''
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
- if test "$_lt_dar_can_shared" = "yes"; then
+ if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
m4_if([$1], [CXX],
-[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+[ if test yes != "$lt_cv_apple_cc_single_mod"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
fi
],[])
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
])
# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
@@ -1138,17 +1160,17 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
# this is /usr/lib:/lib, but when the MPI compilers are used
# the location of the communication and MPI libs are included too.
# If we don't find anything, use the default library path according
# to the aix ld manual.
# Store the results from the different compilers for each TAGNAME.
# Allow to override them for all tags through lt_cv_aix_libpath.
m4_defun([_LT_SYS_MODULE_PATH_AIX],
[m4_require([_LT_DECL_SED])dnl
-if test "${lt_cv_aix_libpath+set}" = set; then
+if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
[AC_LINK_IFELSE([AC_LANG_PROGRAM],[
lt_aix_libpath_sed='[
/Import File Strings/,/^$/ {
/^0/ {
s/^0 *\([^ ]*\) *$/\1/
@@ -1156,17 +1178,17 @@ else
}
}]'
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
# Check for a 64-bit object if we didn't find anything.
if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi],[])
if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
- _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
fi
])
aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
fi
])# _LT_SYS_MODULE_PATH_AIX
# _LT_SHELL_INIT(ARG)
@@ -1176,18 +1198,18 @@ m4_define([_LT_SHELL_INIT],
])])# _LT_SHELL_INIT
# _LT_PROG_ECHO_BACKSLASH
# -----------------------
# Find how we can fake an echo command that does not interpret backslash.
# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
+# of the generated configure script that will find a shell with a builtin
+# printf (that we can use as an echo command).
m4_defun([_LT_PROG_ECHO_BACKSLASH],
[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
AC_MSG_CHECKING([how to print strings])
# Test print first, because it will be a builtin if present.
if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
@@ -1205,20 +1227,20 @@ _LTECHO_EOF'
}
ECHO='func_fallback_echo'
fi
# func_echo_all arg...
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
- $ECHO "$*"
+ $ECHO "$*"
}
-case "$ECHO" in
+case $ECHO in
printf*) AC_MSG_RESULT([printf]) ;;
print*) AC_MSG_RESULT([print -r]) ;;
*) AC_MSG_RESULT([cat]) ;;
esac
m4_ifdef([_AS_DETECT_SUGGESTED],
[_AS_DETECT_SUGGESTED([
test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
@@ -1234,75 +1256,78 @@ _LT_DECL([], [ECHO], [1], [An echo progr
])# _LT_PROG_ECHO_BACKSLASH
# _LT_WITH_SYSROOT
# ----------------
AC_DEFUN([_LT_WITH_SYSROOT],
[AC_MSG_CHECKING([for sysroot])
AC_ARG_WITH([sysroot],
-[ --with-sysroot[=DIR] Search for dependent libraries within DIR
- (or the compiler's sysroot if not specified).],
+[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
+ [Search for dependent libraries within DIR (or the compiler's sysroot
+ if not specified).])],
[], [with_sysroot=no])
dnl lt_sysroot will always be passed unquoted. We quote it here
dnl in case the user passed a directory name.
lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
yes)
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
/*)
lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
;; #(
no|'')
;; #(
*)
- AC_MSG_RESULT([${with_sysroot}])
+ AC_MSG_RESULT([$with_sysroot])
AC_MSG_ERROR([The sysroot must be an absolute path.])
;;
esac
AC_MSG_RESULT([${lt_sysroot:-no}])
_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
-[dependent libraries, and in which our libraries should be installed.])])
+[dependent libraries, and where our libraries should be installed.])])
# _LT_ENABLE_LOCK
# ---------------
m4_defun([_LT_ENABLE_LOCK],
[AC_ARG_ENABLE([libtool-lock],
[AS_HELP_STRING([--disable-libtool-lock],
[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
- HPUX_IA64_MODE="32"
+ HPUX_IA64_MODE=32
;;
*ELF-64*)
- HPUX_IA64_MODE="64"
+ HPUX_IA64_MODE=64
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
;;
*N32*)
LD="${LD-ld} -melf32bmipn32"
;;
*64-bit*)
@@ -1321,31 +1346,78 @@ ia64-*-hpux*)
LD="${LD-ld} -64"
;;
esac
fi
fi
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
*32-bit*)
case $host in
x86_64-*kfreebsd*-gnu)
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
;;
- ppc64-*linux*|powerpc64-*linux*)
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
LD="${LD-ld} -m elf_s390"
;;
sparc64-*linux*)
LD="${LD-ld} -m elf32_sparc"
;;
@@ -1354,17 +1426,20 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*
*64-bit*)
case $host in
x86_64-*kfreebsd*-gnu)
LD="${LD-ld} -m elf_x86_64_fbsd"
;;
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- ppc*-*linux*|powerpc*-*linux*)
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
LD="${LD-ld} -m elf64_s390"
;;
sparc*-*linux*)
LD="${LD-ld} -m elf64_sparc"
;;
@@ -1372,62 +1447,63 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
+ SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_LANG_PUSH(C)
AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+ CFLAGS=$SAVE_CFLAGS
fi
;;
*-*solaris*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
*64-bit*)
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
- i?86-*-solaris*)
+ i?86-*-solaris*|x86_64-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
LD="${LD-ld} -m elf64_sparc"
;;
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
- LD="${LD-ld}_sol2"
+ LD=${LD-ld}_sol2
fi
;;
*)
if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
LD="${LD-ld} -64"
fi
;;
esac
;;
esac
fi
rm -rf conftest*
;;
esac
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
])# _LT_ENABLE_LOCK
# _LT_PROG_AR
# -----------
m4_defun([_LT_PROG_AR],
[AC_CHECK_TOOLS(AR, [ar], false)
: ${AR=ar}
@@ -1436,29 +1512,29 @@ _LT_DECL([], [AR], [1], [The archiver])
_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
[lt_cv_ar_at_file=no
AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
[echo conftest.$ac_objext > conftest.lst
lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -eq 0; then
+ if test 0 -eq "$ac_status"; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -ne 0; then
+ if test 0 -ne "$ac_status"; then
lt_cv_ar_at_file=@
fi
fi
rm -f conftest.* libconftest.a
])
])
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
fi
_LT_DECL([], [archiver_list_spec], [1],
[How to feed a file listing to the archiver])
])# _LT_PROG_AR
@@ -1479,17 +1555,17 @@ _LT_DECL([], [RANLIB], [1],
# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
if test -n "$RANLIB"; then
case $host_os in
- openbsd*)
+ bitrig* | openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
;;
esac
old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
fi
@@ -1515,17 +1591,17 @@ _LT_DECL([], [lock_old_archive_extractio
# Check whether the given compiler option works
AC_DEFUN([_LT_COMPILER_OPTION],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
+ lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
@@ -1542,17 +1618,17 @@ AC_CACHE_CHECK([$1], [$2],
$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
fi
fi
$RM conftest*
])
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
m4_if([$5], , :, [$5])
else
m4_if([$6], , :, [$6])
fi
])# _LT_COMPILER_OPTION
# Old name:
AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
@@ -1564,17 +1640,17 @@ dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION
# [ACTION-SUCCESS], [ACTION-FAILURE])
# ----------------------------------------------------
# Check whether the given linker option works
AC_DEFUN([_LT_LINKER_OPTION],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $3"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&AS_MESSAGE_LOG_FD
@@ -1583,20 +1659,20 @@ AC_CACHE_CHECK([$1], [$2],
if diff conftest.exp conftest.er2 >/dev/null; then
$2=yes
fi
else
$2=yes
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
])
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
m4_if([$4], , :, [$4])
else
m4_if([$5], , :, [$5])
fi
])# _LT_LINKER_OPTION
# Old name:
AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
@@ -1607,17 +1683,17 @@ dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
# LT_CMD_MAX_LEN
#---------------
AC_DEFUN([LT_CMD_MAX_LEN],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
# find the maximum length of command line arguments
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
- teststring="ABCD"
+ teststring=ABCD
case $build_os in
msdosdjgpp*)
# On DJGPP, this test can blow up pretty badly due to problems in libc
# (any single argument exceeding 2000 bytes causes a buffer overrun
# during glob expansion). Even if it were fixed, the result of this
# check would be larger than it should be.
lt_cv_sys_max_cmd_len=12288; # 12K is about right
@@ -1647,17 +1723,17 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [d
;;
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
lt_cv_sys_max_cmd_len=8192;
;;
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
elif test -x /usr/sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
else
lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
fi
@@ -1697,48 +1773,49 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [d
if test -n "$kargmax"; then
lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
else
lt_cv_sys_max_cmd_len=32768
fi
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
+ for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
+ test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
done
# Only check the string length outside the loop.
lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
teststring=
# Add a significant safety factor because C++ compilers can tack on
# massive amounts of additional arguments before passing them to the
# linker. It appears as though 1/2 is a usable value.
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
fi
;;
esac
])
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
else
AC_MSG_RESULT(none)
fi
max_cmd_len=$lt_cv_sys_max_cmd_len
_LT_DECL([], [max_cmd_len], [0],
[What is the maximum length of a command?])
])# LT_CMD_MAX_LEN
@@ -1756,17 +1833,17 @@ m4_defun([_LT_HEADER_DLFCN],
])# _LT_HEADER_DLFCN
# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
# ----------------------------------------------------------------
m4_defun([_LT_TRY_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
+if test yes = "$cross_compiling"; then :
[$4]
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
[#line $LINENO "configure"
#include "confdefs.h"
@@ -1803,19 +1880,19 @@ else
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
@@ -1831,17 +1908,17 @@ int main ()
/* dlclose (self); */
}
else
puts (dlerror ());
return status;
}]
_LT_EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) $1 ;;
x$lt_dlneed_uscore) $2 ;;
x$lt_dlunknown|x*) $3 ;;
esac
else :
@@ -1852,109 +1929,117 @@ fi
rm -fr conftest*
])# _LT_TRY_DLOPEN_SELF
# LT_SYS_DLOPEN_SELF
# ------------------
AC_DEFUN([LT_SYS_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
+if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
else
lt_cv_dlopen=no
lt_cv_dlopen_libs=
case $host_os in
beos*)
- lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
- # if libdl is installed we need to link against it
+ # if libdl is installed we need to link against it
AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
+ lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
])
;;
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
*)
AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
+ [lt_cv_dlopen=shl_load],
[AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
[AC_CHECK_FUNC([dlopen],
- [lt_cv_dlopen="dlopen"],
+ [lt_cv_dlopen=dlopen],
[AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
[AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
[AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
])
])
])
])
])
;;
esac
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
+ if test no = "$lt_cv_dlopen"; then
enable_dlopen=no
+ else
+ enable_dlopen=yes
fi
case $lt_cv_dlopen in
dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- save_LIBS="$LIBS"
+ save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
AC_CACHE_CHECK([whether a program can dlopen itself],
lt_cv_dlopen_self, [dnl
_LT_TRY_DLOPEN_SELF(
lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
])
- if test "x$lt_cv_dlopen_self" = xyes; then
+ if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
lt_cv_dlopen_self_static, [dnl
_LT_TRY_DLOPEN_SELF(
lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
])
fi
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
;;
esac
case $lt_cv_dlopen_self in
yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
*) enable_dlopen_self=unknown ;;
esac
@@ -2036,29 +2121,29 @@ _LT_TAGDECL([compiler_c_o], [lt_cv_prog_
# _LT_COMPILER_FILE_LOCKS([TAGNAME])
# ----------------------------------
# Check to see if we can do hard links to lock some files if needed
m4_defun([_LT_COMPILER_FILE_LOCKS],
[m4_require([_LT_ENABLE_LOCK])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_COMPILER_C_O([$1])
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
AC_MSG_CHECKING([if we can lock with hard links])
hard_links=yes
$RM conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ if test no = "$hard_links"; then
+ AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
need_locks=warn
fi
else
need_locks=no
fi
_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
])# _LT_COMPILER_FILE_LOCKS
@@ -2075,57 +2160,57 @@ else
# MS-DOS does not allow filenames that begin with a dot.
lt_cv_objdir=_libs
fi
rmdir .libs 2>/dev/null])
objdir=$lt_cv_objdir
_LT_DECL([], [objdir], [0],
[The name of the directory that contains temporary libtool files])dnl
m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
- [Define to the sub-directory in which libtool stores uninstalled libraries.])
+AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
+ [Define to the sub-directory where libtool stores uninstalled libraries.])
])# _LT_CHECK_OBJDIR
# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
# --------------------------------------
# Check hardcoding attributes.
m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
[AC_MSG_CHECKING([how to hardcode library paths into programs])
_LT_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
test -n "$_LT_TAGVAR(runpath_var, $1)" ||
- test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+ test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
# We can hardcode non-existent directories.
- if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
+ test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
# Linking always hardcodes the temporary library directory.
_LT_TAGVAR(hardcode_action, $1)=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
_LT_TAGVAR(hardcode_action, $1)=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
_LT_TAGVAR(hardcode_action, $1)=unsupported
fi
AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
- test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
+ test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
# Fast installation is not supported
enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
_LT_TAGDECL([], [hardcode_action], [0],
[How to hardcode a shared library path into an executable])
])# _LT_LINKER_HARDCODE_LIBPATH
@@ -2139,17 +2224,17 @@ AC_MSG_CHECKING([whether stripping libra
if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
AC_MSG_RESULT([yes])
else
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
- if test -n "$STRIP" ; then
+ if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
;;
*)
@@ -2157,251 +2242,353 @@ else
;;
esac
fi
_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
_LT_DECL([], [striplib], [1])
])# _LT_CMD_STRIPLIB
+# _LT_PREPARE_MUNGE_PATH_LIST
+# ---------------------------
+# Make sure func_munge_path_list() is defined correctly.
+m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
+[[# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x@S|@2 in
+ x)
+ ;;
+ *:)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
+ ;;
+ x:*)
+ eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
+ ;;
+ *)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+]])# _LT_PREPARE_PATH_LIST
+
+
# _LT_SYS_DYNAMIC_LINKER([TAG])
# -----------------------------
# PORTME Fill in your ld.so characteristics
m4_defun([_LT_SYS_DYNAMIC_LINKER],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_OBJDUMP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
m4_if([$1],
[], [
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
esac
case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
*\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
;;
*)
lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
+ # and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
+ lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
}
}
}
if (lt_foo != "") { lt_freq[[lt_foo]]++; }
if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
}'`
# AWK program above erroneously prepends '/' to C:/dos/paths
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+ $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi])
library_names_spec=
libname_spec='lib$name'
soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
need_lib_prefix=unknown
hardcode_into_libs=no
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown
+AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
+[User-defined run-time library search path.])
+
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ soname_spec='$libname$release$shared_ext$major'
;;
aix[[4-9]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[[01]] | aix4.[[01]].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib.so
# instead of lib.a to let people know that these are not
# typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a[(]lib.so.V[)]'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
shlibpath_var=LIBPATH
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
- library_names_spec='${libname}${shared_ext}'
+ library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi[[45]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
# the default ld.so.conf also contains /usr/contrib/lib and
# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
# libtool to hard-code these into programs
;;
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
- shrext_cmds=".dll"
+ shrext_cmds=.dll
need_version=no
need_lib_prefix=no
case $GCC,$cc_basename in
yes,*)
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
chmod a+x \$dldir/$dlname~
if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
m4_if([$1], [],[
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
;;
*,cl*)
# Native MSVC
libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
sys_lib_search_path_spec=
lt_save_ifs=$IFS
IFS=';'
for lt_path in $LIB
do
@@ -2418,72 +2605,72 @@ m4_if([$1], [],[
# Convert to unix form, then to dos form, then back to unix form
# but this time dos style (no spaces!) so that the unix form looks
# like /cygdrive/c/PROGRA~1:/cygdr...
sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
- sys_lib_search_path_spec="$LIB"
+ sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
# FIXME: find the short name or the path components, as spaces are
# common. (e.g. "Program Files" -> "PROGRA~1")
;;
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
shlibpath_overrides_runpath=yes
dynamic_linker='Win32 link.exe'
;;
*)
# Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
darwin* | rhapsody*)
dynamic_linker="$host_os dyld"
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
m4_if([$1], [],[
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
dgux*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
if test -x /usr/bin/objformat; then
objformat=`/usr/bin/objformat`
@@ -2491,22 +2678,23 @@ freebsd* | dragonfly*)
case $host_os in
freebsd[[23]].*) objformat=aout ;;
*) objformat=elf ;;
esac
fi
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
freebsd2.*)
shlibpath_overrides_runpath=yes
;;
@@ -2521,36 +2709,25 @@ freebsd* | dragonfly*)
;;
*) # from 4.6 on, and DragonFly
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
esac
;;
-gnu*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
version_type=sunos
@@ -2558,77 +2735,78 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case $host_cpu in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
# or fails outright, so override atomically:
install_override_mode=555
;;
interix[[3-9]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
fi ;;
esac
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
*)
case $LD in # libtool.m4 will add one of these switches to LD
*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
libsuff= shlibsuff= libmagic=32-bit;;
@@ -2637,33 +2815,53 @@ irix5* | irix6* | nonstopux*)
*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
libsuff=64 shlibsuff=64 libmagic=64-bit;;
*) libsuff= shlibsuff= libmagic=never-match;;
esac
;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
dynamic_linker=no
;;
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ ;;
+
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
# Some binutils ld are patched to set DT_RUNPATH
AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
[lt_cv_shlibpath_overrides_runpath=no
save_LDFLAGS=$LDFLAGS
@@ -2678,17 +2876,22 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
])
shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
- # Append ld.so.conf contents to the search path
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
@@ -2698,127 +2901,137 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
dynamic_linker='GNU/Linux ld.so'
;;
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
*nto* | *qnx*)
version_type=qnx
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
-openbsd*)
+openbsd* | bitrig*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
else
- shlibpath_overrides_runpath=yes
+ need_version=yes
fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
- shrext_cmds=".dll"
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
dynamic_linker=no
;;
solaris*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
# ldd complains unless libraries are executable
postinstall_cmds='chmod +x $lib'
;;
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
;;
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
runpath_var=LD_RUN_PATH
;;
siemens)
@@ -2829,34 +3042,34 @@ sysv4 | sysv4.3*)
need_version=no
shlibpath_overrides_runpath=no
sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
;;
esac
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
+ version_type=sco
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
case $host_os in
sco3.2v5*)
sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
;;
esac
@@ -2864,48 +3077,58 @@ sysv5* | sco3.2v5* | sco5v6* | unixware*
sys_lib_dlsearch_path_spec='/usr/lib'
;;
tpf*)
# TPF is a cross-target only. Preferred cross-host = GNU/Linux.
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
*)
dynamic_linker=no
;;
esac
AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
_LT_DECL([], [variables_saved_for_relink], [1],
[Variables whose values should be saved in libtool wrapper scripts and
restored at link time])
_LT_DECL([], [need_lib_prefix], [0],
[Do we need the "lib" prefix for modules?])
_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
_LT_DECL([], [version_type], [0], [Library versioning type])
_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
@@ -2928,49 +3151,51 @@ _LT_DECL([], [finish_cmds], [2],
[Commands used to finish a libtool library installation in a directory])
_LT_DECL([], [finish_eval], [1],
[[As "finish_cmds", except a single script fragment to be evaled but
not shown]])
_LT_DECL([], [hardcode_into_libs], [0],
[Whether we should hardcode library paths into libraries])
_LT_DECL([], [sys_lib_search_path_spec], [2],
[Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
- [Run-time system search path for libraries])
+_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
+ [Detected run-time system search path for libraries])
+_LT_DECL([], [configure_time_lt_sys_library_path], [2],
+ [Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
])# _LT_SYS_DYNAMIC_LINKER
# _LT_PATH_TOOL_PREFIX(TOOL)
# --------------------------
-# find a file program which can recognize shared library
+# find a file program that can recognize shared library
AC_DEFUN([_LT_PATH_TOOL_PREFIX],
[m4_require([_LT_DECL_EGREP])dnl
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
ac_dummy="m4_if([$2], , $PATH, [$2])"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -f "$ac_dir/$1"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
else
cat <<_LT_EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -2983,21 +3208,21 @@ dnl not every word. This closes a longs
_LT_EOF
fi ;;
esac
fi
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
AC_MSG_RESULT($MAGIC_CMD)
else
AC_MSG_RESULT(no)
fi
_LT_DECL([], [MAGIC_CMD], [0],
[Used to examine libraries when file_magic_cmd begins with "file"])dnl
])# _LT_PATH_TOOL_PREFIX
@@ -3005,17 +3230,17 @@ _LT_DECL([], [MAGIC_CMD], [0],
# Old name:
AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
# _LT_PATH_MAGIC
# --------------
-# find a file program which can recognize a shared library
+# find a file program that can recognize a shared library
m4_defun([_LT_PATH_MAGIC],
[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
_LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
else
MAGIC_CMD=:
fi
@@ -3032,81 +3257,81 @@ AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
AC_ARG_WITH([gnu-ld],
[AS_HELP_STRING([--with-gnu-ld],
[assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
+ [test no = "$withval" || with_gnu_ld=yes],
[with_gnu_ld=no])dnl
ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by $CC])
case $host in
*-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
+ # gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[[\\/]]* | ?:[[\\/]]*)
re_direlt='/[[^/]][[^/]]*/\.\./'
# Canonicalize the pathname of ld
ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
- test -z "$LD" && LD="$ac_prog"
+ test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
+[if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi])
+rm -f conftest.i conftest2.i conftest.out])
+])# _LT_PATH_DD
+
+
+# _LT_CMD_TRUNCATE
+# ----------------
+# find command to truncate a binary pipe
+m4_defun([_LT_CMD_TRUNCATE],
+[m4_require([_LT_PATH_DD])
+AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
+_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
+ [Command to truncate a binary pipe])
+])# _LT_CMD_TRUNCATE
+
+
# _LT_CHECK_MAGIC_METHOD
# ----------------------
# how to check for library dependencies
# -- PORTME fill in with the dynamic library characteristics
m4_defun([_LT_CHECK_MAGIC_METHOD],
[m4_require([_LT_DECL_EGREP])
m4_require([_LT_DECL_OBJDUMP])
AC_CACHE_CHECK([how to recognize dependent libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[[4-9]]*)
lt_cv_deplibs_check_method=pass_all
;;
beos*)
lt_cv_deplibs_check_method=pass_all
@@ -3215,18 +3477,17 @@ cygwin*)
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
;;
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ if ( file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
# Keep this pattern in sync with the one in func_win32_libid.
lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
@@ -3252,20 +3513,16 @@ freebsd* | dragonfly*)
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
else
lt_cv_deplibs_check_method=pass_all
fi
;;
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
haiku*)
lt_cv_deplibs_check_method=pass_all
;;
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case $host_cpu in
ia64*)
@@ -3294,17 +3551,17 @@ irix5* | irix6* | nonstopux*)
*-n32|*"-n32 ") libmagic=N32;;
*-64|*"-64 ") libmagic=64-bit;;
*) libmagic=never-match;;
esac
lt_cv_deplibs_check_method=pass_all
;;
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
@@ -3316,18 +3573,18 @@ newos6*)
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=/usr/lib/libnls.so
;;
*nto* | *qnx*)
lt_cv_deplibs_check_method=pass_all
;;
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
fi
;;
osf3* | osf4* | osf5*)
lt_cv_deplibs_check_method=pass_all
@@ -3370,16 +3627,19 @@ sysv4 | sysv4.3*)
lt_cv_deplibs_check_method=pass_all
;;
esac
;;
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
])
file_magic_glob=
want_nocaseglob=no
if test "$build" = "$host"; then
case $host_os in
mingw* | pw32*)
@@ -3410,77 +3670,82 @@ _LT_DECL([], [want_nocaseglob], [1],
# LT_PATH_NM
# ----------
# find the pathname to a BSD- or MS-compatible name lister
AC_DEFUN([LT_PATH_NM],
[AC_REQUIRE([AC_PROG_CC])dnl
AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ lt_cv_path_NM=$NM
else
- lt_nm_to_check="${ac_tool_prefix}nm"
+ lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
- break
+ break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
- break
+ break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
;;
esac
;;
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi])
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
# Let the user override the test.
else
AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
*COFF*)
- DUMPBIN="$DUMPBIN -symbols"
+ DUMPBIN="$DUMPBIN -symbols -headers"
;;
*)
DUMPBIN=:
;;
esac
fi
AC_SUBST([DUMPBIN])
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
AC_SUBST([NM])
_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
[lt_cv_nm_interface="BSD nm"
@@ -3516,30 +3781,30 @@ m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKL
m4_require([_LT_DECL_OBJDUMP])
m4_require([_LT_DECL_DLLTOOL])
AC_CACHE_CHECK([how to associate runtime and link libraries],
lt_cv_sharedlib_from_linklib_cmd,
[lt_cv_sharedlib_from_linklib_cmd='unknown'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- # two different shell functions defined in ltmain.sh
- # decide which to use based on capabilities of $DLLTOOL
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
;;
*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
;;
esac
;;
*)
# fallback: assume linklib IS sharedlib
- lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
;;
esac
])
sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
[Command to associate shared and link libraries])
@@ -3556,39 +3821,54 @@ AC_CACHE_CHECK([if $MANIFEST_TOOL is a m
[lt_cv_path_mainfest_tool=no
echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
$MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
cat conftest.err >&AS_MESSAGE_LOG_FD
if $GREP 'Manifest Tool' conftest.out > /dev/null; then
lt_cv_path_mainfest_tool=yes
fi
rm -f conftest*])
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
MANIFEST_TOOL=:
fi
_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
])# _LT_PATH_MANIFEST_TOOL
+# _LT_DLL_DEF_P([FILE])
+# ---------------------
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with func_dll_def_p in the libtool script
+AC_DEFUN([_LT_DLL_DEF_P],
+[dnl
+ test DEF = "`$SED -n dnl
+ -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace
+ -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments
+ -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl
+ -e q dnl Only consider the first "real" line
+ $1`" dnl
+])# _LT_DLL_DEF_P
+
+
# LT_LIB_M
# --------
# check for math library
AC_DEFUN([LT_LIB_M],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
# These system don't have libm, or don't need it
;;
*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
;;
*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
+ AC_CHECK_LIB(m, cos, LIBM=-lm)
;;
esac
AC_SUBST([LIBM])
])# LT_LIB_M
# Old name:
AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
dnl aclocal-1.4 backwards compatibility:
@@ -3597,17 +3877,17 @@ dnl AC_DEFUN([AC_CHECK_LIBM], [])
# _LT_COMPILER_NO_RTTI([TAGNAME])
# -------------------------------
m4_defun([_LT_COMPILER_NO_RTTI],
[m4_require([_LT_TAG_COMPILER])dnl
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $cc_basename in
nvcc*)
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
*)
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
esac
_LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
@@ -3649,17 +3929,17 @@ sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
case $host_os in
aix*)
symcode='[[BCDT]]'
;;
cygwin* | mingw* | pw32* | cegcc*)
symcode='[[ABCDGISTW]]'
;;
hpux*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
symcode='[[ABCDEGRST]]'
fi
;;
irix* | nonstopux*)
symcode='[[BCDEGRST]]'
;;
osf*)
symcode='[[BCDEGQRST]]'
@@ -3682,24 +3962,54 @@ sysv4)
esac
# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
symcode='[[ABCDGIRSTW]]' ;;
esac
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
mingw*)
opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
;;
esac
@@ -3707,31 +4017,34 @@ esac
# Try without a prefix underscore, then with it.
for ac_symprfx in "" "_"; do
# Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
symxfrm="\\1 $ac_symprfx\\2 \\2"
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK ['"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx]"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
# Check to see that the pipe works correctly.
pipe_works=no
@@ -3761,21 +4074,21 @@ _LT_EOF
rm -f "$nlist"T
fi
# Make sure that we snagged all the symbols we need.
if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT@&t@_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT@&t@_DLSYM_CONST
#else
# define LT@&t@_DLSYM_CONST const
#endif
#ifdef __cplusplus
extern "C" {
@@ -3791,17 +4104,17 @@ _LT_EOF
LT@&t@_DLSYM_CONST struct {
const char *name;
void *address;
}
lt__PROGRAM__LTX_preloaded_symbols[[]] =
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
return lt__PROGRAM__LTX_preloaded_symbols;
@@ -3811,19 +4124,19 @@ static const void *lt_preloaded_setup()
#ifdef __cplusplus
}
#endif
_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
+ LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
CFLAGS=$lt_globsym_save_CFLAGS
else
echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
fi
else
@@ -3834,17 +4147,17 @@ _LT_EOF
fi
else
echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
cat conftest.$ac_ext >&5
fi
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
+ if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
fi
done
])
if test -z "$lt_cv_sys_global_symbol_pipe"; then
lt_cv_sys_global_symbol_to_cdecl=
@@ -3861,75 +4174,85 @@ if test "$lt_cv_nm_interface" = "MS dump
elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
nm_file_list_spec='@'
fi
_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
[Take the output of nm and produce a listing of raw symbols and C names])
_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
[Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
+ [Transform the output of nm into a list of symbols to manually relocate])
_LT_DECL([global_symbol_to_c_name_address],
[lt_cv_sys_global_symbol_to_c_name_address], [1],
[Transform the output of nm in a C name address pair])
_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
[lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
[Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
+ [The name lister interface])
_LT_DECL([], [nm_file_list_spec], [1],
[Specify filename containing input files for $NM])
]) # _LT_CMD_GLOBAL_SYMBOLS
# _LT_COMPILER_PIC([TAGNAME])
# ---------------------------
m4_defun([_LT_COMPILER_PIC],
[m4_require([_LT_TAG_COMPILER])dnl
_LT_TAGVAR(lt_prog_compiler_wl, $1)=
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_TAGVAR(lt_prog_compiler_static, $1)=
m4_if([$1], [CXX], [
# C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
;;
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | cygwin* | os2* | pw32* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
*djgpp*)
# DJGPP does not support shared libraries at all
@@ -3969,17 +4292,17 @@ m4_if([$1], [CXX], [
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
esac
else
case $host_os in
aix[[4-9]]*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
chorus*)
case $cc_basename in
@@ -4010,24 +4333,24 @@ m4_if([$1], [CXX], [
;;
freebsd* | dragonfly*)
# FreeBSD uses GNU C++
;;
hpux9* | hpux10* | hpux11*)
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+ if test ia64 != "$host_cpu"; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
fi
;;
aCC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
;;
esac
@@ -4046,25 +4369,25 @@ m4_if([$1], [CXX], [
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
# CC pic flag -KPIC is the default.
;;
*)
;;
esac
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# KAI C++ Compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
ecpc* )
- # old Intel C++ for x86_64 which still supported -KPIC.
+ # old Intel C++ for x86_64, which still supported -KPIC.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
icpc* )
# Intel C++, used to be incompatible with GCC.
# ICC 10 doesn't accept -KPIC any more.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@@ -4199,55 +4522,61 @@ m4_if([$1], [CXX], [
;;
*)
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
esac
fi
],
[
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
;;
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
;;
@@ -4308,56 +4637,75 @@ m4_if([$1], [CXX], [
fi
;;
esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
hpux9* | hpux10* | hpux11*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC (with -KPIC) is the default.
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
+ # old Intel for x86_64, which still supported -KPIC.
ecc*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
# icc used to be incompatible with GCC.
# ICC 10 doesn't accept -KPIC any more.
icc* | ifort*)
@@ -4372,16 +4720,22 @@ m4_if([$1], [CXX], [
_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
;;
nagfor*)
# NAG Fortran compiler
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
ccc*)
@@ -4469,17 +4823,17 @@ m4_if([$1], [CXX], [
sysv4 | sysv4.2uw2* | sysv4.3*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
;;
sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
@@ -4498,17 +4852,17 @@ m4_if([$1], [CXX], [
*)
_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
;;
esac
fi
])
case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
+ # For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
;;
esac
@@ -4564,27 +4918,31 @@ m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_TAG_COMPILER])dnl
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
m4_if([$1], [CXX], [
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
case $host_os in
aix[[4-9]]*)
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global defined
- # symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
- _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
;;
cygwin* | mingw* | cegcc*)
case $cc_basename in
cl*)
_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
;;
*)
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
@@ -4620,53 +4978,53 @@ m4_if([$1], [CXX], [
_LT_TAGVAR(old_archive_from_new_cmds, $1)=
_LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
_LT_TAGVAR(thread_safe_flag_spec, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
_LT_TAGVAR(include_expsyms, $1)=
# exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
# Exclude shared library initialization/finalization symbols.
dnl Note also adjust exclude_expsyms for C++ above.
extract_expsyms_cmds=
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
interix*)
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
- openbsd*)
+ openbsd* | bitrig*)
with_gnu_ld=no
;;
esac
_LT_TAGVAR(ld_shlibs, $1)=yes
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
# with the native linker. However, as the warning in the GNU ld
# block says, versions before 2.19.5* couldn't really create working
# shared libraries, regardless of the interface used.
case `$LD -v 2>&1` in
*\ \(GNU\ Binutils\)\ 2.19.5*) ;;
@@ -4678,47 +5036,47 @@ dnl Note also adjust exclude_expsyms for
esac
;;
*)
lt_use_gnu_ld_interface=yes
;;
esac
fi
- if test "$lt_use_gnu_ld_interface" = yes; then
+ if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+ wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
supports_anon_versioning=no
- case `$LD -v 2>&1` in
+ case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
# See if GNU ld supports shared libraries.
case $host_os in
aix[[3-9]]*)
# On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
+ if test ia64 != "$host_cpu"; then
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
*** really care for shared libraries, you may want to install binutils
*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
@@ -4727,166 +5085,199 @@ dnl Note also adjust exclude_expsyms for
_LT_EOF
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
;;
beos*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
cygwin* | mingw* | pw32* | cegcc*)
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
_LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
+ if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
+ && test no = "$tmp_diet"
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
tmp_addflag=' -i_dynamic -nofor_main' ;;
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
lf95*) # Lahey Fortran 8.1
_LT_TAGVAR(whole_archive_flag_spec, $1)=
tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
- _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
+ tcc*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
+ ;;
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
_LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
solaris*)
if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
@@ -4894,123 +5285,146 @@ _LT_EOF
*** create shared libraries on Solaris systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
case `$LD -v 2>&1` in
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
_LT_EOF
;;
*)
# For security reasons, it is highly recommended that you always
# use absolute paths for naming shared libraries, and exclude the
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
sunos4*)
_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
- if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
runpath_var=
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=yes
_LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
_LT_TAGVAR(hardcode_direct, $1)=unsupported
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
@@ -5019,23 +5433,31 @@ _LT_EOF
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
_LT_TAGVAR(archive_cmds, $1)=''
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
# We have reworked collect2
:
else
# We have old collect2
_LT_TAGVAR(hardcode_direct, $1)=unsupported
@@ -5044,80 +5466,99 @@ _LT_EOF
# to unsupported forces relinking
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=
fi
;;
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
_LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
@@ -5137,55 +5578,56 @@ _LT_EOF
# Native MSVC
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='@'
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# Assume MSVC wrapper
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
# FIXME: Should let the user specify the lib program.
_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
@@ -5225,277 +5667,299 @@ _LT_EOF
freebsd* | dragonfly*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
hpux9*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
fi
;;
hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
m4_if($1, [], [
# Older versions of the 11.00 compiler do not understand -b yet
# (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
_LT_LINKER_OPTION([if $CC understands -b],
_LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
[_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
;;
esac
fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
;;
esac
fi
;;
irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
# This should be the same for all languages, so no per-tag cache variable.
AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
[lt_cv_irix_exported_symbol],
- [save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ [save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
AC_LINK_IFELSE(
[AC_LANG_SOURCE(
[AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
[C++], [[int foo (void) { return 0; }]],
[Fortran 77], [[
subroutine foo
end]],
[Fortran], [[
subroutine foo
end]])])],
[lt_cv_irix_exported_symbol=yes],
[lt_cv_irix_exported_symbol=no])
- LDFLAGS="$save_LDFLAGS"])
- if test "$lt_cv_irix_exported_symbol" = yes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ LDFLAGS=$save_LDFLAGS])
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
fi
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
newsos6)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*nto* | *qnx*)
;;
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
fi
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
os2*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
osf3*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
solaris*)
_LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
- _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
fi
;;
esac
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
sunos4*)
- if test "x$host_vendor" = xsequent; then
+ if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
@@ -5534,95 +5998,95 @@ _LT_EOF
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
_LT_TAGVAR(ld_shlibs, $1)=yes
fi
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
uts4*)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
- if test x$host_vendor = xsni; then
+ if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
;;
esac
fi
fi
])
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
_LT_DECL([], [extract_expsyms_cmds], [2],
[The commands to extract the exported symbol list from a shared archive])
#
# Do we need to explicitly link libc?
#
case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
x|xyes)
# Assume -lc should be added
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- if test "$enable_shared" = yes && test "$GCC" = yes; then
+ if test yes,yes = "$GCC,$enable_shared"; then
case $_LT_TAGVAR(archive_cmds, $1) in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
'$CC '*)
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
@@ -5692,22 +6156,22 @@ _LT_TAGDECL([], [allow_undefined_flag],
_LT_TAGDECL([], [no_undefined_flag], [1],
[Flag that enforces no undefined symbols])
_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
[Flag to hardcode $libdir into a binary during linking.
This must work even if $libdir does not exist])
_LT_TAGDECL([], [hardcode_libdir_separator], [1],
[Whether we need a single "-rpath" flag with a separated argument])
_LT_TAGDECL([], [hardcode_direct], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary])
_LT_TAGDECL([], [hardcode_direct_absolute], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary and the resulting library dependency is
- "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ "absolute", i.e impossible to change by setting $shlibpath_var if the
library is relocated])
_LT_TAGDECL([], [hardcode_minus_L], [0],
[Set to "yes" if using the -LDIR flag during linking hardcodes DIR
into the resulting binary])
_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
[Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
into the resulting binary])
_LT_TAGDECL([], [hardcode_automatic], [0],
@@ -5738,20 +6202,20 @@ dnl _LT_TAGDECL([], [thread_safe_flag_sp
dnl [Compiler flag to generate thread safe objects])
])# _LT_LINKER_SHLIBS
# _LT_LANG_C_CONFIG([TAG])
# ------------------------
# Ensure that the configuration variables for a C compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_C_CONFIG],
[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
+lt_save_CC=$CC
AC_LANG_PUSH(C)
# Source file extension for C test sources.
ac_ext=c
# Object file extension for compiled C test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
@@ -5777,66 +6241,70 @@ if test -n "$compiler"; then
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
LT_SYS_DLOPEN_SELF
_LT_CMD_STRIPLIB
- # Report which library types will actually be built
+ # Report what library types will actually be built
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_CONFIG($1)
fi
AC_LANG_POP
-CC="$lt_save_CC"
+CC=$lt_save_CC
])# _LT_LANG_C_CONFIG
# _LT_LANG_CXX_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a C++ compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_CXX_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
+if test -n "$CXX" && ( test no != "$CXX" &&
+ ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+ (test g++ != "$CXX"))); then
AC_PROG_CXXCPP
else
_lt_caught_CXX_error=yes
fi
AC_LANG_PUSH(C++)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
@@ -5868,17 +6336,17 @@ ac_ext=cpp
# Object file extension for compiled C++ test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the CXX compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
+if test yes != "$_lt_caught_CXX_error"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
# Code to be used in simple link tests
lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
@@ -5910,45 +6378,45 @@ if test "$_lt_caught_CXX_error" != yes;
CFLAGS=$CXXFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
if test -n "$compiler"; then
# We don't want -fno-exception when compiling C++ code, so set the
# no_builtin_flag separately
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
else
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
fi
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
# Set up default GNU C++ configuration
LT_PATH_LD
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ if test yes = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# If archive_cmds runs LD, not CC, wlarc should be empty
# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
# investigate it a little bit more. (MM)
- wlarc='${wl}'
+ wlarc='$wl'
# ancient GNU ld didn't support --whole-archive et. al.
if eval "`$CC -print-prog-name=ld` --help 2>&1" |
$GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
else
with_gnu_ld=no
wlarc=
# A generic and very simple default shared library creation
@@ -5974,37 +6442,56 @@ if test "$_lt_caught_CXX_error" != yes;
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
_LT_TAGVAR(ld_shlibs, $1)=yes
case $host_os in
aix3*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
case $ld_flag in
*-brtl*)
aix_use_runtimelinking=yes
break
;;
esac
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
@@ -6013,23 +6500,31 @@ if test "$_lt_caught_CXX_error" != yes;
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
_LT_TAGVAR(archive_cmds, $1)=''
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
# We have reworked collect2
:
else
# We have old collect2
_LT_TAGVAR(hardcode_direct, $1)=unsupported
@@ -6037,84 +6532,104 @@ if test "$_lt_caught_CXX_error" != yes;
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=
fi
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag=$shared_flag' $wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to
# export.
_LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # The "-G" linker flag allows undefined symbols.
+ _LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
# Determine the default libpath from the value encoded in an empty
# executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared
- # libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared
+ # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
beos*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
chorus*)
case $cc_basename in
*)
@@ -6132,77 +6647,106 @@ if test "$_lt_caught_CXX_error" != yes;
# no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='@'
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- func_to_tool_file "$lt_outputfile"~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# g++
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
darwin* | rhapsody*)
_LT_DARWIN_LINKER_FEATURES($1)
;;
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
dgux*)
case $cc_basename in
ec++*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
ghcx*)
# Green Hills C++ Compiler
@@ -6227,71 +6771,68 @@ if test "$_lt_caught_CXX_error" != yes;
;;
freebsd* | dragonfly*)
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
- gnu*)
- ;;
-
haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
hpux9*)
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
# location of the library.
case $cc_basename in
CC*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GXX"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
;;
*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
esac
fi
case $host_cpu in
hppa*64*|ia64*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
@@ -6307,224 +6848,224 @@ if test "$_lt_caught_CXX_error" != yes;
case $cc_basename in
CC*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
irix5* | irix6*)
case $cc_basename in
CC*)
# SGI C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
;;
*)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
fi
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# Archives containing C++ object files must be created using
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
;;
icpc* | ecpc* )
# Intel C++
with_gnu_ld=yes
# version 8.0 and above of icpc choke on multiply defined symbols
# if we add $predep_objects and $postdep_objects, however 7.1 and
# earlier do not add the objects themselves.
case `$CC -V 2>&1` in
*"Version 7."*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 8.0 or newer
tmp_idyn=
case $host_cpu in
ia64*) tmp_idyn=' -i_dynamic';;
esac
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
*pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
_LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
- compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
_LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
- $RANLIB $oldlib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
_LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 6 and above use weak symbols
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
;;
cxx*)
# Compaq C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols'
runpath_var=LD_RUN_PATH
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
;;
xl* | mpixl* | bgxl*)
# IBM XL 8.0 on PPC, with GNU ld
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
;;
*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*)
# Sun C++ 5.9
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
# Not sure whether something based on
# $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
# would be better.
output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
@@ -6572,50 +7113,45 @@ if test "$_lt_caught_CXX_error" != yes;
# Workaround some broken pre-1.5 toolchains
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
;;
*nto* | *qnx*)
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
fi
output_verbose_link_cmd=func_echo_all
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
osf3* | osf4* | osf5*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Archives containing C++ object files must be created using
# the KAI C++ compiler.
case $host in
osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
esac
@@ -6623,56 +7159,56 @@ if test "$_lt_caught_CXX_error" != yes;
RCC*)
# Rational C++ 2.4.1
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
cxx*)
case $host in
osf3*)
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
;;
*)
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
- $RM $lib.exp'
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+ $RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
;;
esac
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
case $host in
osf3*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
@@ -6708,133 +7244,133 @@ if test "$_lt_caught_CXX_error" != yes;
;;
solaris*)
case $cc_basename in
CC* | sunCC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
+ # but understands '-z linker_flag'.
# Supported since Solaris 2.6 (maybe 2.5.1?)
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
;;
esac
_LT_TAGVAR(link_all_deplibs, $1)=yes
output_verbose_link_cmd='func_echo_all'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
;;
gcx*)
# Green Hills C++ Compiler
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
# The C++ compiler must be used to create the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
;;
*)
# GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # g++ 2.7 appears to require '-G' NOT '-shared' on this
# platform.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
;;
esac
fi
;;
esac
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
- '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
_LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
- '"$_LT_TAGVAR(reload_cmds, $1)"
+ '"$_LT_TAGVAR(reload_cmds, $1)"
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
tandem*)
case $cc_basename in
NCC*)
# NonStop-UX NCC 3.20
@@ -6855,20 +7391,20 @@ if test "$_lt_caught_CXX_error" != yes;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+ test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
- _LT_TAGVAR(GCC, $1)="$GXX"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$GXX
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_SYS_HIDDEN_LIBDEPS($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
@@ -6885,17 +7421,17 @@ if test "$_lt_caught_CXX_error" != yes;
LDCXX=$LD
LD=$lt_save_LD
GCC=$lt_save_GCC
with_gnu_ld=$lt_save_with_gnu_ld
lt_cv_path_LDCXX=$lt_cv_path_LD
lt_cv_path_LD=$lt_save_path_LD
lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
+fi # test yes != "$_lt_caught_CXX_error"
AC_LANG_POP
])# _LT_LANG_CXX_CONFIG
# _LT_FUNC_STRIPNAME_CNF
# ----------------------
# func_stripname_cnf prefix suffix name
@@ -6907,23 +7443,24 @@ AC_LANG_POP
# This function is identical to the (non-XSI) version of func_stripname,
# except this one can be used by m4 code that may be executed by configure,
# rather than the libtool script.
m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
AC_REQUIRE([_LT_DECL_SED])
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
func_stripname_cnf ()
{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ case @S|@2 in
+ .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
+ *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
esac
} # func_stripname_cnf
])# _LT_FUNC_STRIPNAME_CNF
+
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
# compiler output when linking a shared library.
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
@@ -6997,81 +7534,81 @@ if AC_TRY_EVAL(ac_compile); then
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
# Sentinel used to keep track of whether or not we are before
# the conftest object file.
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
- case ${prev}${p} in
+ case $prev$p in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
# Remove the space.
- if test $p = "-L" ||
- test $p = "-R"; then
+ if test x-L = "$p" ||
+ test x-R = "$p"; then
prev=$p
continue
fi
# Expand the sysroot to ease extracting the directories later.
if test -z "$prev"; then
case $p in
-L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
-R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
-l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
esac
fi
case $p in
=*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
esac
- if test "$pre_test_object_deps_done" = no; then
- case ${prev} in
+ if test no = "$pre_test_object_deps_done"; then
+ case $prev in
-L | -R)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
else
- _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
fi
;;
# The "-l" case would never come before the object being
# linked, so don't bother handling this case.
esac
else
if test -z "$_LT_TAGVAR(postdeps, $1)"; then
- _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ _LT_TAGVAR(postdeps, $1)=$prev$p
else
- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
fi
fi
prev=
;;
*.lto.$objext) ;; # Ignore GCC LTO objects
*.$objext)
# This assumes that the test object file only shows up
# once in the compiler output.
if test "$p" = "conftest.$objext"; then
pre_test_object_deps_done=yes
continue
fi
- if test "$pre_test_object_deps_done" = no; then
+ if test no = "$pre_test_object_deps_done"; then
if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
- _LT_TAGVAR(predep_objects, $1)="$p"
+ _LT_TAGVAR(predep_objects, $1)=$p
else
_LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
fi
else
if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
- _LT_TAGVAR(postdep_objects, $1)="$p"
+ _LT_TAGVAR(postdep_objects, $1)=$p
else
_LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
fi
fi
;;
*) ;; # Ignore the rest.
@@ -7092,70 +7629,25 @@ m4_if([$1], [CXX],
[case $host_os in
interix[[3-9]]*)
# Interix 3.5 installs completely hosed .la files for C++, so rather than
# hack all around it, let's just trust "g++" to DTRT.
_LT_TAGVAR(predep_objects,$1)=
_LT_TAGVAR(postdep_objects,$1)=
_LT_TAGVAR(postdeps,$1)=
;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
-
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
-solaris*)
- case $cc_basename in
- CC* | sunCC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
esac
])
case " $_LT_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
_LT_TAGVAR(compiler_lib_search_dirs, $1)=
if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
fi
_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
[The directories searched by this compiler when creating a shared library])
_LT_TAGDECL([], [predep_objects], [1],
[Dependencies to place before and after the objects being linked to
create a shared library])
_LT_TAGDECL([], [postdep_objects], [1])
_LT_TAGDECL([], [predeps], [1])
@@ -7165,20 +7657,20 @@ _LT_TAGDECL([], [compiler_lib_search_pat
a shared library])
])# _LT_SYS_HIDDEN_LIBDEPS
# _LT_LANG_F77_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
[AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
+if test -z "$F77" || test no = "$F77"; then
_lt_disable_F77=yes
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
@@ -7205,17 +7697,17 @@ ac_ext=f
# Object file extension for compiled f77 test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the F77 compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
+if test yes != "$_lt_disable_F77"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
return
end
"
# Code to be used in simple link tests
@@ -7227,90 +7719,94 @@ if test "$_lt_disable_F77" != yes; then
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
+ lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${F77-"f77"}
CFLAGS=$FFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
GCC=$G77
if test -n "$compiler"; then
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$G77"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$G77
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
GCC=$lt_save_GCC
- CC="$lt_save_CC"
- CFLAGS="$lt_save_CFLAGS"
-fi # test "$_lt_disable_F77" != yes
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_F77"
AC_LANG_POP
])# _LT_LANG_F77_CONFIG
# _LT_LANG_FC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
[AC_LANG_PUSH(Fortran)
-if test -z "$FC" || test "X$FC" = "Xno"; then
+if test -z "$FC" || test no = "$FC"; then
_lt_disable_FC=yes
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
@@ -7337,17 +7833,17 @@ ac_ext=${ac_fc_srcext-f}
# Object file extension for compiled fc test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the FC compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
+if test yes != "$_lt_disable_FC"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
return
end
"
# Code to be used in simple link tests
@@ -7359,59 +7855,63 @@ if test "$_lt_disable_FC" != yes; then
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
+ lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${FC-"f95"}
CFLAGS=$FCFLAGS
compiler=$CC
GCC=$ac_cv_fc_compiler_gnu
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
if test -n "$compiler"; then
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_SYS_HIDDEN_LIBDEPS($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
@@ -7421,27 +7921,27 @@ if test "$_lt_disable_FC" != yes; then
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
-fi # test "$_lt_disable_FC" != yes
+fi # test yes != "$_lt_disable_FC"
AC_LANG_POP
])# _LT_LANG_FC_CONFIG
# _LT_LANG_GCJ_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for the GNU Java Compiler compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GCJ_CONFIG],
[AC_REQUIRE([LT_PROG_GCJ])dnl
AC_LANG_SAVE
# Source file extension for Java test sources.
ac_ext=java
# Object file extension for compiled Java test sources.
@@ -7465,17 +7965,17 @@ _LT_LINKER_BOILERPLATE
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=yes
CC=${GCJ-"gcj"}
CFLAGS=$GCJFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# GCJ did not exist at the time GCC didn't implicitly link libc in.
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
@@ -7498,17 +7998,17 @@ CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GCJ_CONFIG
# _LT_LANG_GO_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for the GNU Go compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GO_CONFIG],
[AC_REQUIRE([LT_PROG_GO])dnl
AC_LANG_SAVE
# Source file extension for Go test sources.
ac_ext=go
# Object file extension for compiled Go test sources.
@@ -7532,17 +8032,17 @@ _LT_LINKER_BOILERPLATE
lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=yes
CC=${GOC-"gccgo"}
CFLAGS=$GOFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# Go did not exist at the time GCC didn't implicitly link libc in.
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(reload_flag, $1)=$reload_flag
_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
@@ -7565,43 +8065,43 @@ CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
])# _LT_LANG_GO_CONFIG
# _LT_LANG_RC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for the Windows resource compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_RC_CONFIG],
[AC_REQUIRE([LT_PROG_RC])dnl
AC_LANG_SAVE
# Source file extension for RC test sources.
ac_ext=rc
# Object file extension for compiled RC test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
+lt_simple_link_test_code=$lt_simple_compile_test_code
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
+lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=
CC=${RC-"windres"}
CFLAGS=
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
@@ -7620,17 +8120,17 @@ CFLAGS=$lt_save_CFLAGS
# LT_PROG_GCJ
# -----------
AC_DEFUN([LT_PROG_GCJ],
[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
[m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
[AC_CHECK_TOOL(GCJ, gcj,)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
AC_SUBST(GCJFLAGS)])])[]dnl
])
# Old name:
AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
@@ -7729,36 +8229,36 @@ do
done
done
IFS=$as_save_IFS
lt_ac_max=0
lt_ac_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
+ test ! -f "$lt_ac_sed" && continue
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
# Check for GNU sed and select it if it is found.
if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
lt_cv_path_SED=$lt_ac_sed
break
fi
while true; do
cat conftest.in conftest.in >conftest.tmp
mv conftest.tmp conftest.in
cp conftest.in conftest.nl
echo >>conftest.nl
$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
cmp -s conftest.out conftest.nl || break
# 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
+ test 10 -lt "$lt_ac_count" && break
lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
+ if test "$lt_ac_count" -gt "$lt_ac_max"; then
lt_ac_max=$lt_ac_count
lt_cv_path_SED=$lt_ac_sed
fi
done
done
])
SED=$lt_cv_path_SED
AC_SUBST([SED])
@@ -7772,37 +8272,17 @@ dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_SED], [])
# _LT_CHECK_SHELL_FEATURES
# ------------------------
# Find out whether the shell is Bourne or XSI compatible,
# or has some other useful features.
m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
lt_unset=false
fi
_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
# test EBCDIC or ASCII
case `echo X|tr X '\101'` in
@@ -7816,112 +8296,19 @@ case `echo X|tr X '\101'` in
lt_NL2SP='tr \r\n \100\100'
;;
esac
_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
])# _LT_CHECK_SHELL_FEATURES
-# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
-# ------------------------------------------------------
-# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
-# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
-m4_defun([_LT_PROG_FUNCTION_REPLACE],
-[dnl {
-sed -e '/^$1 ()$/,/^} # $1 /c\
-$1 ()\
-{\
-m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
-} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-])
-
-
-# _LT_PROG_REPLACE_SHELLFNS
-# -------------------------
-# Replace existing portable implementations of several shell functions with
-# equivalent extended shell implementations where those features are available..
-m4_defun([_LT_PROG_REPLACE_SHELLFNS],
-[if test x"$xsi_shell" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
- func_split_long_opt_name=${1%%=*}
- func_split_long_opt_arg=${1#*=}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
- func_split_short_opt_arg=${1#??}
- func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
-
- _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
-
- _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
-fi
-
-if test x"$lt_shell_append" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
- func_quote_for_eval "${2}"
-dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
- eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
-
- # Save a `func_append' function call where possible by direct use of '+='
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-else
- # Save a `func_append' function call even when '+=' is not available
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
- AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
-fi
-])
-
# _LT_PATH_CONVERSION_FUNCTIONS
# -----------------------------
-# Determine which file name conversion functions should be used by
+# Determine what file name conversion functions should be used by
# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
# for certain cross-compile configurations and native mingw.
m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_MSG_CHECKING([how to convert $build file names to $host format])
AC_CACHE_VAL(lt_cv_to_host_file_cmd,
[case $host in
@@ -7978,25 +8365,25 @@ esac
to_tool_file_cmd=$lt_cv_to_tool_file_cmd
AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
[0], [convert $build files to toolchain format])dnl
])# _LT_PATH_CONVERSION_FUNCTIONS
# Helper functions for option handling. -*- Autoconf -*-
#
-# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 7 ltoptions.m4
+# serial 8 ltoptions.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
# ------------------------------------------
m4_define([_LT_MANGLE_OPTION],
@@ -8007,17 +8394,17 @@ m4_define([_LT_MANGLE_OPTION],
# ---------------------------------------
# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
# matching handler defined, dispatch to it. Other OPTION-NAMEs are
# saved as a flag.
m4_define([_LT_SET_OPTION],
[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
_LT_MANGLE_DEFUN([$1], [$2]),
- [m4_warning([Unknown $1 option `$2'])])[]dnl
+ [m4_warning([Unknown $1 option '$2'])])[]dnl
])
# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
# ------------------------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
m4_define([_LT_IF_OPTION],
[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
@@ -8053,23 +8440,25 @@ m4_if([$1],[LT_INIT],[
dnl specified:
_LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
])
_LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
])
dnl
dnl If no reference was made to various pairs of opposing options, then
dnl we run the default mode handler for the pair. For example, if neither
- dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
dnl archives by default:
_LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
_LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
_LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
_LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
- [_LT_ENABLE_FAST_INSTALL])
+ [_LT_ENABLE_FAST_INSTALL])
+ _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
+ [_LT_WITH_AIX_SONAME([aix])])
])
])# _LT_SET_OPTIONS
# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
# -----------------------------------------
m4_define([_LT_MANGLE_DEFUN],
@@ -8087,17 +8476,17 @@ m4_define([LT_OPTION_DEFINE],
# ------
LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
])
AU_DEFUN([AC_LIBTOOL_DLOPEN],
[_LT_SET_OPTION([LT_INIT], [dlopen])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.])
+put the 'dlopen' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
# win32-dll
# ---------
@@ -8123,48 +8512,48 @@ test -z "$OBJDUMP" && OBJDUMP=objdump
_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
])# win32-dll
AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
_LT_SET_OPTION([LT_INIT], [win32-dll])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.])
+put the 'win32-dll' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
# _LT_ENABLE_SHARED([DEFAULT])
# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-shared flag, and supports the 'shared' and
+# 'disable-shared' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_SHARED],
[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([shared],
[AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
[p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
_LT_DECL([build_libtool_libs], [enable_shared], [0],
[Whether or not to build shared libraries])
])# _LT_ENABLE_SHARED
@@ -8186,39 +8575,39 @@ AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABL
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_ENABLE_SHARED], [])
dnl AC_DEFUN([AM_DISABLE_SHARED], [])
# _LT_ENABLE_STATIC([DEFAULT])
# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-static flag, and support the 'static' and
+# 'disable-static' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_STATIC],
[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([static],
[AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
[p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_static=]_LT_ENABLE_STATIC_DEFAULT)
_LT_DECL([build_old_libs], [enable_static], [0],
[Whether or not to build static libraries])
])# _LT_ENABLE_STATIC
@@ -8240,111 +8629,162 @@ AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABL
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AM_ENABLE_STATIC], [])
dnl AC_DEFUN([AM_DISABLE_STATIC], [])
# _LT_ENABLE_FAST_INSTALL([DEFAULT])
# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-fast-install flag, and support the 'fast-install'
+# and 'disable-fast-install' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_FAST_INSTALL],
[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([fast-install],
[AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
[optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
[p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
_LT_DECL([fast_install], [enable_fast_install], [0],
[Whether or not to optimize for fast installation])dnl
])# _LT_ENABLE_FAST_INSTALL
LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
# Old names:
AU_DEFUN([AC_ENABLE_FAST_INSTALL],
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.])
+the 'fast-install' option into LT_INIT's first parameter.])
])
AU_DEFUN([AC_DISABLE_FAST_INSTALL],
[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.])
+the 'disable-fast-install' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+# _LT_WITH_AIX_SONAME([DEFAULT])
+# ----------------------------------
+# implement the --with-aix-soname flag, and support the `aix-soname=aix'
+# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
+# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'.
+m4_define([_LT_WITH_AIX_SONAME],
+[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
+shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[[5-9]]*,yes)
+ AC_MSG_CHECKING([which variant of shared library versioning to provide])
+ AC_ARG_WITH([aix-soname],
+ [AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
+ [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
+ [case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ AC_MSG_ERROR([Unknown argument to --with-aix-soname])
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname],
+ [AC_CACHE_VAL([lt_cv_with_aix_soname],
+ [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
+ with_aix_soname=$lt_cv_with_aix_soname])
+ AC_MSG_RESULT([$with_aix_soname])
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+_LT_DECL([], [shared_archive_member_spec], [0],
+ [Shared archive member basename, for filename based shared library versioning on AIX])dnl
+])# _LT_WITH_AIX_SONAME
+
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])
+
+
# _LT_WITH_PIC([MODE])
# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
# LT_INIT options.
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'.
m4_define([_LT_WITH_PIC],
[AC_ARG_WITH([pic],
[AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
[lt_p=${PACKAGE-default}
case $withval in
yes|no) pic_mode=$withval ;;
*)
pic_mode=default
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for lt_pkg in $withval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$lt_pkg" = "X$lt_p"; then
pic_mode=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
- [pic_mode=default])
-
-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+ [pic_mode=m4_default([$1], [default])])
_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
])# _LT_WITH_PIC
LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
# Old name:
AU_DEFUN([AC_LIBTOOL_PICMODE],
[_LT_SET_OPTION([LT_INIT], [pic-only])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.])
+put the 'pic-only' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
m4_define([_LTDL_MODE], [])
LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
@@ -8357,17 +8797,18 @@ LT_OPTION_DEFINE([LTDL_INIT], [subprojec
m4_define([_LTDL_TYPE], [])
LT_OPTION_DEFINE([LTDL_INIT], [installable],
[m4_define([_LTDL_TYPE], [installable])])
LT_OPTION_DEFINE([LTDL_INIT], [convenience],
[m4_define([_LTDL_TYPE], [convenience])])
# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
# serial 6 ltsugar.m4
@@ -8390,28 +8831,28 @@ m4_define([_lt_join],
[m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
# lt_car(LIST)
# lt_cdr(LIST)
# ------------
# Manipulate m4 lists.
# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
+# Autoconf-2.59, which quotes differently.
m4_define([lt_car], [[$1]])
m4_define([lt_cdr],
[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
[$#], 1, [],
[m4_dquote(m4_shift($@))])])
m4_define([lt_unquote], $1)
# lt_append(MACRO-NAME, STRING, [SEPARATOR])
# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
# Note that neither SEPARATOR nor STRING are expanded; they are appended
# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
# No SEPARATOR is output if MACRO-NAME was previously undefined (different
# than defined and empty).
#
# This macro is needed until we can rely on Autoconf 2.62, since earlier
# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
m4_define([lt_append],
@@ -8481,66 +8922,67 @@ m4_define([lt_dict_filter],
[m4_if([$5], [], [],
[lt_join(m4_quote(m4_default([$4], [[, ]])),
lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
[lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
])
# ltversion.m4 -- version numbers -*- Autoconf -*-
#
-# Copyright (C) 2004 Free Software Foundation, Inc.
+# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc.
# Written by Scott James Remnant, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
# @configure_input@
-# serial 3337 ltversion.m4
+# serial 4179 ltversion.m4
# This file is part of GNU Libtool
-m4_define([LT_PACKAGE_VERSION], [2.4.2])
-m4_define([LT_PACKAGE_REVISION], [1.3337])
+m4_define([LT_PACKAGE_VERSION], [2.4.6])
+m4_define([LT_PACKAGE_REVISION], [2.4.6])
AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.4.2'
-macro_revision='1.3337'
+[macro_version='2.4.6'
+macro_revision='2.4.6'
_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
_LT_DECL(, macro_revision, 0)
])
# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Scott James Remnant, 2004.
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
# serial 5 lt~obsolete.m4
# These exist entirely to fool aclocal when bootstrapping libtool.
#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
# which have later been changed to m4_define as they aren't part of the
# exported API, or moved to Autoconf or Automake where they belong.
#
# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
# using a macro with the same name in our local m4/libtool.m4 it'll
# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
# and doesn't know about Autoconf macros at all.)
#
# So we provide this file, which has a silly filename so it's always
# included after everything else. This provides aclocal with the
# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
#
# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
# Yes, that means every name once taken will need to remain here until
# we give up compatibility with versions before 1.7, at which point
# we need to keep only those names which we still refer to.
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
@@ -8602,55 +9044,55 @@ m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEF
m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
-# Copyright (C) 2002-2013 Free Software Foundation, Inc.
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.14'
+[am__api_version='1.15'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.14.1], [],
+m4_if([$1], [1.15], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
# _AM_AUTOCONF_VERSION(VERSION)
# -----------------------------
# aclocal traces this macro to find the Autoconf version.
# This is a private macro too. Using m4_define simplifies
# the logic in aclocal, which can simply ignore this definition.
m4_define([_AM_AUTOCONF_VERSION], [])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.14.1])dnl
+[AM_AUTOMAKE_VERSION([1.15])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
@@ -8685,25 +9127,24 @@ _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCON
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH. The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.
AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
])
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
@@ -8724,17 +9165,17 @@ else
$1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
@@ -8915,17 +9356,17 @@ AM_CONDITIONAL([AMDEP], [test "x$enable_
AC_SUBST([AMDEPBACKSLASH])dnl
_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
AC_SUBST([am__nodep])dnl
_AM_SUBST_NOTMAKE([am__nodep])dnl
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
@@ -8991,17 +9432,17 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
@@ -9081,18 +9522,18 @@ AM_MISSING_PROG([MAKEINFO], [makeinfo])
AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
AC_REQUIRE([AC_PROG_MKDIR_P])dnl
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
#
#
AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
[_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
[_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
@@ -9155,17 +9596,21 @@ that behaves properly: `AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
*)
install_sh="\${SHELL} $am_aux_dir/install-sh"
esac
fi
AC_SUBST([install_sh])])
-# Copyright (C) 2003-2013 Free Software Foundation, Inc.
+# Copyright (C) 2003-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
@@ -9227,17 +9672,17 @@ else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_MAINTAINER_MODE([DEFAULT-MODE])
# ----------------------------------
# Control maintainer-specific portions of Makefiles.
@@ -9262,17 +9707,17 @@ AC_MSG_CHECKING([whether to enable maint
AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST([MAINT])dnl
]
)
# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
@@ -9312,17 +9757,17 @@ fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
AC_MSG_RESULT([$_am_result])
rm -f confinc confmf
])
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
@@ -9351,17 +9796,17 @@ if eval "$MISSING --is-lightweight"; the
else
am_missing_run=
AC_MSG_WARN(['missing' script is too old or missing])
fi
])
# Helper functions for option handling. -*- Autoconf -*-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
@@ -9380,17 +9825,17 @@ AC_DEFUN([_AM_SET_OPTIONS],
[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_PROG_CC_C_O
# ---------------
# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
@@ -9427,17 +9872,17 @@ if test "$am_cv_prog_cc_c_o" != yes; the
# and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
CC="$am_aux_dir/compile $CC"
fi
AC_LANG_POP([C])])
# For backward compatibility.
AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_RUN_LOG(COMMAND)
# -------------------
# Run COMMAND, save the exit status in ac_status, and log it.
@@ -9446,17 +9891,17 @@ AC_DEFUN([AM_RUN_LOG],
[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
(exit $ac_status); }])
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
@@ -9527,17 +9972,17 @@ AC_CONFIG_COMMANDS_PRE(
if test -n "$am_sleep_pid"; then
# Hide warnings about reused PIDs.
wait $am_sleep_pid 2>/dev/null
fi
AC_MSG_RESULT([done])])
rm -f conftest.file
])
-# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+# Copyright (C) 2009-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_SILENT_RULES([DEFAULT])
# --------------------------
# Enable less verbose build rules; with the default set to DEFAULT
@@ -9587,17 +10032,17 @@ AM_SUBST_NOTMAKE([AM_V])dnl
AC_SUBST([AM_DEFAULT_V])dnl
AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
AM_BACKSLASH='\'
AC_SUBST([AM_BACKSLASH])dnl
_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
])
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor 'install' (even GNU) is that you can't
@@ -9615,17 +10060,17 @@ AC_DEFUN([AM_PROG_INSTALL_STRIP],
# will honor the 'STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006-2013 Free Software Foundation, Inc.
+# Copyright (C) 2006-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
@@ -9634,17 +10079,17 @@ AC_DEFUN([_AM_SUBST_NOTMAKE])
# AM_SUBST_NOTMAKE(VARIABLE)
# --------------------------
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
# Check how to create a tarball. -*- Autoconf -*-
-# Copyright (C) 2004-2013 Free Software Foundation, Inc.
+# Copyright (C) 2004-2014 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
diff --git libpng-1.2.53rc02/compile ag/compile
--- libpng-1.2.53rc02/compile 2013-12-31 21:21:52.000000000 -0600
+++ ag/compile 2015-02-21 13:51:08.835661470 -0600
@@ -1,14 +1,14 @@
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
scriptversion=2012-10-14.11; # UTC
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
# Written by Tom Tromey .
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
diff --git libpng-1.2.53rc02/config.guess ag/config.guess
--- libpng-1.2.53rc02/config.guess 2013-12-31 21:21:52.000000000 -0600
+++ ag/config.guess 2015-02-21 13:51:08.842666712 -0600
@@ -1,13 +1,13 @@
#! /bin/sh
# Attempt to guess a canonical system name.
-# Copyright 1992-2013 Free Software Foundation, Inc.
+# Copyright 1992-2014 Free Software Foundation, Inc.
-timestamp='2013-11-29'
+timestamp='2014-11-04'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -19,22 +19,22 @@ timestamp='2013-11-29'
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
#
-# Originally written by Per Bothner.
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
#
# You can get the latest version of this script from:
# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
#
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to .
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
Usage: $0 [OPTION]
Output the configuration name of the system \`$me' is run on.
@@ -45,17 +45,17 @@ Operation modes:
-v, --version print version number, then exit
Report bugs and patches to ."
version="\
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
help="
Try \`$me --help' for more information."
# Parse command line
@@ -144,17 +144,17 @@ Linux|GNU|GNU/*)
#if defined(__UCLIBC__)
LIBC=uclibc
#elif defined(__dietlibc__)
LIBC=dietlibc
#else
LIBC=gnu
#endif
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
;;
esac
# Note: order is significant - the case branches are not exclusive.
case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
*:NetBSD:*:*)
# NetBSD (nbsd) targets should (where applicable) match one or
@@ -574,18 +574,19 @@ EOF
exit ;;
*:AIX:*:[4567])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
+ if [ -x /usr/bin/lslpp ] ; then
+ IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+ awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
else
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
echo ${IBM_ARCH}-ibm-aix${IBM_REV}
exit ;;
*:AIX:*:*)
echo rs6000-ibm-aix
exit ;;
@@ -821,17 +822,17 @@ EOF
echo ${UNAME_MACHINE}-pc-cygwin
exit ;;
*:MINGW64*:*)
echo ${UNAME_MACHINE}-pc-mingw64
exit ;;
*:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
exit ;;
- i*:MSYS*:*)
+ *:MSYS*:*)
echo ${UNAME_MACHINE}-pc-msys
exit ;;
i*:windows32*:*)
# uname -m includes "-pc" on this system.
echo ${UNAME_MACHINE}-mingw32
exit ;;
i*:PW*:*)
echo ${UNAME_MACHINE}-pc-pw32
@@ -964,20 +965,20 @@ EOF
#else
CPU=
#endif
#endif
EOF
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
;;
- or1k:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ openrisc*:Linux:*:*)
+ echo or1k-unknown-linux-${LIBC}
exit ;;
- or32:Linux:*:*)
+ or32:Linux:*:* | or1k*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
padre:Linux:*:*)
echo sparc-unknown-linux-${LIBC}
exit ;;
parisc64:Linux:*:* | hppa64:Linux:*:*)
echo hppa64-unknown-linux-${LIBC}
exit ;;
@@ -1366,164 +1367,16 @@ EOF
i*86:AROS:*:*)
echo ${UNAME_MACHINE}-pc-aros
exit ;;
x86_64:VMkernel:*:*)
echo ${UNAME_MACHINE}-unknown-esx
exit ;;
esac
-eval $set_cc_for_build
-cat >$dummy.c <
-# include
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- c34*)
- echo c34-convex-bsd
- exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
- exit ;;
- esac
-fi
-
cat >&2 < header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the header file. */
#undef HAVE_UNISTD_H
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
- */
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
#undef LT_OBJDIR
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
diff --git libpng-1.2.53rc02/config.h.in~ ag/config.h.in~
--- libpng-1.2.53rc02/config.h.in~ 1969-12-31 18:00:00.000000000 -0600
+++ ag/config.h.in~ 2015-02-21 13:47:16.000000000 -0600
@@ -0,0 +1,86 @@
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `m' library (-lm). */
+#undef HAVE_LIBM
+
+/* Define to 1 if you have the `z' library (-lz). */
+#undef HAVE_LIBZ
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_MALLOC_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `memset' function. */
+#undef HAVE_MEMSET
+
+/* Define to 1 if you have the `pow' function. */
+#undef HAVE_POW
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+ */
+#undef LT_OBJDIR
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if your declares `struct tm'. */
+#undef TM_IN_SYS_TIME
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `unsigned int' if does not define. */
+#undef size_t
diff --git libpng-1.2.53rc02/config.sub ag/config.sub
--- libpng-1.2.53rc02/config.sub 2013-12-31 21:21:52.000000000 -0600
+++ ag/config.sub 2015-02-21 13:51:08.848411446 -0600
@@ -1,13 +1,13 @@
#! /bin/sh
# Configuration validation subroutine script.
-# Copyright 1992-2013 Free Software Foundation, Inc.
+# Copyright 1992-2014 Free Software Foundation, Inc.
-timestamp='2013-10-01'
+timestamp='2014-12-03'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -20,17 +20,17 @@ timestamp='2013-10-01'
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to .
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.
# You can get the latest version of this script from:
# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
@@ -63,17 +63,17 @@ Operation modes:
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
Report bugs and patches to ."
version="\
GNU config.sub ($timestamp)
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright 1992-2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
help="
Try \`$me --help' for more information."
# Parse command line
@@ -278,58 +278,64 @@ case $basic_machine in
| mips64r5900 | mips64r5900el \
| mips64vr | mips64vrel \
| mips64vr4100 | mips64vr4100el \
| mips64vr4300 | mips64vr4300el \
| mips64vr5000 | mips64vr5000el \
| mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
+ | mipsisa32r6 | mipsisa32r6el \
| mipsisa64 | mipsisa64el \
| mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64r6 | mipsisa64r6el \
| mipsisa64sb1 | mipsisa64sb1el \
| mipsisa64sr71k | mipsisa64sr71kel \
| mipsr5900 | mipsr5900el \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
| moxie \
| mt \
| msp430 \
| nds32 | nds32le | nds32be \
| nios | nios2 | nios2eb | nios2el \
| ns16k | ns32k \
- | open8 \
- | or1k | or32 \
+ | open8 | or1k | or1knd | or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle \
| pyramid \
+ | riscv32 | riscv64 \
| rl78 | rx \
| score \
| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
| spu \
| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
| ubicom32 \
| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+ | visium \
| we32k \
| x86 | xc16x | xstormy16 | xtensa \
| z8k | z80)
basic_machine=$basic_machine-unknown
;;
c54x)
basic_machine=tic54x-unknown
;;
c55x)
basic_machine=tic55x-unknown
;;
c6x)
basic_machine=tic6x-unknown
;;
+ leon|leon[3-9])
+ basic_machine=sparc-$basic_machine
+ ;;
m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
basic_machine=$basic_machine-unknown
os=-none
;;
m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
;;
ms1)
basic_machine=mt-unknown
@@ -397,29 +403,32 @@ case $basic_machine in
| mips64r5900-* | mips64r5900el-* \
| mips64vr-* | mips64vrel-* \
| mips64vr4100-* | mips64vr4100el-* \
| mips64vr4300-* | mips64vr4300el-* \
| mips64vr5000-* | mips64vr5000el-* \
| mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa32r6-* | mipsisa32r6el-* \
| mipsisa64-* | mipsisa64el-* \
| mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64r6-* | mipsisa64r6el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipsr5900-* | mipsr5900el-* \
| mipstx39-* | mipstx39el-* \
| mmix-* \
| mt-* \
| msp430-* \
| nds32-* | nds32le-* | nds32be-* \
| nios-* | nios2-* | nios2eb-* | nios2el-* \
| none-* | np1-* | ns16k-* | ns32k-* \
| open8-* \
+ | or1k*-* \
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
| pyramid-* \
| rl78-* | romp-* | rs6000-* | rx-* \
| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
@@ -427,16 +436,17 @@ case $basic_machine in
| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
| tahoe-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tile*-* \
| tron-* \
| ubicom32-* \
| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
| vax-* \
+ | visium-* \
| we32k-* \
| x86-* | x86_64-* | xc16x-* | xps100-* \
| xstormy16-* | xtensa*-* \
| ymp-* \
| z8k-* | z80-*)
;;
# Recognize the basic CPU types without company name, with glob match.
xtensa*)
@@ -764,16 +774,19 @@ case $basic_machine in
os=-irix4
;;
esac
;;
isi68 | isi)
basic_machine=m68k-isi
os=-sysv
;;
+ leon-*|leon[3-9]-*)
+ basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
+ ;;
m68knommu)
basic_machine=m68k-unknown
os=-linux
;;
m68knommu-*)
basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
os=-linux
;;
@@ -819,16 +832,20 @@ case $basic_machine in
monitor)
basic_machine=m68k-rom68k
os=-coff
;;
morphos)
basic_machine=powerpc-unknown
os=-morphos
;;
+ moxiebox)
+ basic_machine=moxie-unknown
+ os=-moxiebox
+ ;;
msdos)
basic_machine=i386-pc
os=-msdos
;;
ms1-*)
basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
;;
msys)
@@ -1364,24 +1381,24 @@ case $os in
| -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
| -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -chorusos* | -chorusrdb* | -cegcc* \
| -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
| -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
| -linux-newlib* | -linux-musl* | -linux-uclibc* \
- | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
case $basic_machine in
x86-* | i*86-*)
;;
*)
os=-nto$os
@@ -1589,19 +1606,16 @@ case $basic_machine in
os=-elf
;;
mips*-cisco)
os=-elf
;;
mips*-*)
os=-elf
;;
- or1k-*)
- os=-elf
- ;;
or32-*)
os=-coff
;;
*-tti) # must be before sparc entry or we get the wrong os.
os=-sysv3
;;
sparc-* | *-sun)
os=-sunos4.1.1
diff --git libpng-1.2.53rc02/configure ag/configure
--- libpng-1.2.53rc02/configure 2015-02-21 13:47:16.000000000 -0600
+++ ag/configure 2015-02-21 13:51:09.478197833 -0600
@@ -644,16 +644,17 @@ PNGLIB_MAJOR
PNGLIB_VERSION
SYMBOL_PREFIX
HAVE_LD_VERSION_SCRIPT_FALSE
HAVE_LD_VERSION_SCRIPT_TRUE
LIBPNG_NO_MMX
LIBPNG_DEFINES
LIBOBJS
POW_LIB
+LT_SYS_LIBRARY_PATH
OTOOL64
OTOOL
LIPO
NMEDIT
DSYMUTIL
MANIFEST_TOOL
RANLIB
ac_ct_AR
@@ -771,31 +772,33 @@ enable_option_checking
enable_silent_rules
enable_maintainer_mode
enable_dependency_tracking
with_gnu_ld
enable_shared
enable_static
with_pic
enable_fast_install
+with_aix_soname
with_sysroot
enable_libtool_lock
with_pkgconfigdir
with_binconfigs
with_libpng_compat
'
ac_precious_vars='build_alias
host_alias
target_alias
CC
CFLAGS
LDFLAGS
LIBS
CPPFLAGS
-CPP'
+CPP
+LT_SYS_LIBRARY_PATH'
# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
ac_unrecognized_opts=
ac_unrecognized_sep=
# The variables have the same names as the options, with
@@ -1425,34 +1428,39 @@ Optional Features:
--disable-libtool-lock avoid locking (might break parallel builds)
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
both]
- --with-sysroot=DIR Search for dependent libraries within DIR
- (or the compiler's sysroot if not specified).
+ --with-aix-soname=aix|svr4|both
+ shared library versioning (aka "SONAME") variant to
+ provide on AIX, [default=aix].
+ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the
+ compiler's sysroot if not specified).
--with-pkgconfigdir Use the specified pkgconfig dir (default is
libdir/pkgconfig)
--with-binconfigs Generate shell libpng-config scripts as well as
pkg-config data [default=yes]
--with-libpng-compat Generate the obsolete libpng.so library
[default=yes]
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L if you have libraries in a
nonstandard directory
LIBS libraries to pass to the linker, e.g. -l
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if
you have headers in a nonstandard directory
CPP C preprocessor
+ LT_SYS_LIBRARY_PATH
+ User-defined run-time library search path.
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to .
_ACEOF
ac_status=$?
fi
@@ -2281,17 +2289,17 @@ fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-am__api_version='1.14'
+am__api_version='1.15'
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
if test -f "$ac_dir/install-sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f "$ac_dir/install.sh"; then
@@ -2482,18 +2490,18 @@ test "$program_prefix" != NONE &&
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s&\$&$program_suffix&;$program_transform_name"
# Double any \ or $.
# By default was `s,x,x', remove it if useless.
ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
if test x"${MISSING+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
*)
MISSING="\${SHELL} $am_aux_dir/missing" ;;
esac
@@ -2502,17 +2510,17 @@ fi
if eval "$MISSING --is-lightweight"; then
am_missing_run="$MISSING "
else
am_missing_run=
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
*)
install_sh="\${SHELL} $am_aux_dir/install-sh"
esac
fi
@@ -2830,18 +2838,18 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
#
#
mkdir_p='$(MKDIR_P)'
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar pax cpio none'
@@ -2889,16 +2897,17 @@ If you want to complete the configuratio
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
to "yes", and re-run configure.
END
as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
fi
fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
# Check whether --enable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then :
enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
else
USE_MAINTAINER_MODE=no
fi
@@ -4360,17 +4369,17 @@ fi
# func_echo_all arg...
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
$ECHO ""
}
-case "$ECHO" in
+case $ECHO in
printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
$as_echo "printf" >&6; } ;;
print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
$as_echo "print -r" >&6; } ;;
*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
$as_echo "cat" >&6; } ;;
esac
@@ -4386,90 +4395,90 @@ esac
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+ withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
case $host in
*-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
+ # gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[\\/]* | ?:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the pathname of ld
ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
- test -z "$LD" && LD="$ac_prog"
+ test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
$as_echo_n "checking for non-GNU ld... " >&6; }
fi
if ${lt_cv_path_LD+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 &5
$as_echo "$LD" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
@@ -5078,32 +5087,32 @@ fi
case `pwd` in
*\ * | *\ *)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
esac
-macro_version='2.4.2'
-macro_revision='1.3337'
+macro_version='2.4.6'
+macro_revision='2.4.6'
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
# Backslashify metacharacters that are still active within
# double-quoted strings.
sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
# Same as above, but do not quote variable references.
double_quote_subst='s/\(["`\\]\)/\\\1/g'
@@ -5119,62 +5128,67 @@ no_glob_subst='s/\*/\\\*/g'
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
if ${lt_cv_path_NM+:} false; then :
$as_echo_n "(cached) " >&6
else
if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ lt_cv_path_NM=$NM
else
- lt_nm_to_check="${ac_tool_prefix}nm"
+ lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
- break
+ break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
- break
+ break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
;;
esac
;;
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
$as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
# Let the user override the test.
else
if test -n "$ac_tool_prefix"; then
for ac_prog in dumpbin "link -dump"
do
@@ -5270,28 +5284,28 @@ yes:)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
DUMPBIN=$ac_ct_DUMPBIN
fi
fi
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
*COFF*)
- DUMPBIN="$DUMPBIN -symbols"
+ DUMPBIN="$DUMPBIN -symbols -headers"
;;
*)
DUMPBIN=:
;;
esac
fi
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
@@ -5321,17 +5335,17 @@ $as_echo "$lt_cv_nm_interface" >&6; }
# find the maximum length of command line arguments
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
$as_echo_n "checking the maximum length of command line arguments... " >&6; }
if ${lt_cv_sys_max_cmd_len+:} false; then :
$as_echo_n "(cached) " >&6
else
i=0
- teststring="ABCD"
+ teststring=ABCD
case $build_os in
msdosdjgpp*)
# On DJGPP, this test can blow up pretty badly due to problems in libc
# (any single argument exceeding 2000 bytes causes a buffer overrun
# during glob expansion). Even if it were fixed, the result of this
# check would be larger than it should be.
lt_cv_sys_max_cmd_len=12288; # 12K is about right
@@ -5361,17 +5375,17 @@ else
;;
amigaos*)
# On AmigaOS with pdksh, this test takes hours, literally.
# So we just punt and use a minimum line length of 8192.
lt_cv_sys_max_cmd_len=8192;
;;
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
elif test -x /usr/sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
else
lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
fi
@@ -5411,32 +5425,33 @@ else
if test -n "$kargmax"; then
lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
else
lt_cv_sys_max_cmd_len=32768
fi
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
+ for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
+ test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
done
# Only check the string length outside the loop.
lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
teststring=
# Add a significant safety factor because C++ compilers can tack on
@@ -5444,17 +5459,17 @@ else
# linker. It appears as though 1/2 is a usable value.
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
fi
;;
esac
fi
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
$as_echo "none" >&6; }
fi
max_cmd_len=$lt_cv_sys_max_cmd_len
@@ -5462,40 +5477,16 @@ max_cmd_len=$lt_cv_sys_max_cmd_len
: ${CP="cp -f"}
: ${MV="mv -f"}
: ${RM="rm -f"}
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
lt_unset=false
fi
@@ -5608,23 +5599,23 @@ $as_echo "$lt_cv_ld_reload_flag" >&6; }
reload_flag=$lt_cv_ld_reload_flag
case $reload_flag in
"" | " "*) ;;
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
reload_cmds=false
fi
;;
darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
;;
esac
@@ -5739,23 +5730,23 @@ if ${lt_cv_deplibs_check_method+:} false
$as_echo_n "(cached) " >&6
else
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[4-9]*)
lt_cv_deplibs_check_method=pass_all
;;
beos*)
lt_cv_deplibs_check_method=pass_all
@@ -5772,18 +5763,17 @@ cygwin*)
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
;;
mingw* | pw32*)
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ if ( file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
# Keep this pattern in sync with the one in func_win32_libid.
lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
lt_cv_file_magic_cmd='$OBJDUMP -f'
fi
;;
@@ -5809,20 +5799,16 @@ freebsd* | dragonfly*)
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
else
lt_cv_deplibs_check_method=pass_all
fi
;;
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
haiku*)
lt_cv_deplibs_check_method=pass_all
;;
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case $host_cpu in
ia64*)
@@ -5851,17 +5837,17 @@ irix5* | irix6* | nonstopux*)
*-n32|*"-n32 ") libmagic=N32;;
*-64|*"-64 ") libmagic=64-bit;;
*) libmagic=never-match;;
esac
lt_cv_deplibs_check_method=pass_all
;;
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
@@ -5873,18 +5859,18 @@ newos6*)
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=/usr/lib/libnls.so
;;
*nto* | *qnx*)
lt_cv_deplibs_check_method=pass_all
;;
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
fi
;;
osf3* | osf4* | osf5*)
lt_cv_deplibs_check_method=pass_all
@@ -5927,16 +5913,19 @@ sysv4 | sysv4.3*)
lt_cv_deplibs_check_method=pass_all
;;
esac
;;
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
$as_echo "$lt_cv_deplibs_check_method" >&6; }
file_magic_glob=
want_nocaseglob=no
@@ -6081,30 +6070,30 @@ test -z "$DLLTOOL" && DLLTOOL=dlltool
$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_sharedlib_from_linklib_cmd='unknown'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- # two different shell functions defined in ltmain.sh
- # decide which to use based on capabilities of $DLLTOOL
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
;;
*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
;;
esac
;;
*)
# fallback: assume linklib IS sharedlib
- lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
;;
esac
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
@@ -6249,38 +6238,38 @@ _ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
echo conftest.$ac_objext > conftest.lst
lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
(eval $lt_ar_try) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
- if test "$ac_status" -eq 0; then
+ if test 0 -eq "$ac_status"; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
(eval $lt_ar_try) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
- if test "$ac_status" -ne 0; then
+ if test 0 -ne "$ac_status"; then
lt_cv_ar_at_file=@
fi
fi
rm -f conftest.* libconftest.a
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
$as_echo "$lt_cv_ar_at_file" >&6; }
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
fi
@@ -6487,17 +6476,17 @@ test -z "$RANLIB" && RANLIB=:
# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
if test -n "$RANLIB"; then
case $host_os in
- openbsd*)
+ bitrig* | openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
;;
esac
old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
fi
@@ -6577,17 +6566,17 @@ sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
case $host_os in
aix*)
symcode='[BCDT]'
;;
cygwin* | mingw* | pw32* | cegcc*)
symcode='[ABCDGISTW]'
;;
hpux*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
symcode='[ABCDEGRST]'
fi
;;
irix* | nonstopux*)
symcode='[BCDEGRST]'
;;
osf*)
symcode='[BCDEGQRST]'
@@ -6610,24 +6599,54 @@ sysv4)
esac
# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
symcode='[ABCDGIRSTW]' ;;
esac
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
mingw*)
opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
;;
esac
@@ -6635,31 +6654,34 @@ esac
# Try without a prefix underscore, then with it.
for ac_symprfx in "" "_"; do
# Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
symxfrm="\\1 $ac_symprfx\\2 \\2"
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK '"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
fi
lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
# Check to see that the pipe works correctly.
pipe_works=no
@@ -6697,21 +6719,21 @@ _LT_EOF
rm -f "$nlist"T
fi
# Make sure that we snagged all the symbols we need.
if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
# define LT_DLSYM_CONST const
#endif
#ifdef __cplusplus
extern "C" {
@@ -6727,17 +6749,17 @@ _LT_EOF
LT_DLSYM_CONST struct {
const char *name;
void *address;
}
lt__PROGRAM__LTX_preloaded_symbols[] =
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
/* This works around a problem in FreeBSD linker */
#ifdef FREEBSD_WORKAROUND
static const void *lt_preloaded_setup() {
return lt__PROGRAM__LTX_preloaded_symbols;
@@ -6747,23 +6769,23 @@ static const void *lt_preloaded_setup()
#ifdef __cplusplus
}
#endif
_LT_EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
+ LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ test $ac_status = 0; } && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
CFLAGS=$lt_globsym_save_CFLAGS
else
echo "cannot find nm_test_func in $nlist" >&5
fi
else
@@ -6774,17 +6796,17 @@ _LT_EOF
fi
else
echo "$progname: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
+ if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
fi
done
fi
@@ -6827,91 +6849,183 @@ fi
+
+
+
+
+
+
+
+
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
$as_echo_n "checking for sysroot... " >&6; }
# Check whether --with-sysroot was given.
if test "${with_sysroot+set}" = set; then :
withval=$with_sysroot;
else
with_sysroot=no
fi
lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
yes)
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
/*)
lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
;; #(
no|'')
;; #(
*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
-$as_echo "${with_sysroot}" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
$as_echo "${lt_sysroot:-no}" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+ ac_path_lt_DD_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in dd; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+ $ac_path_lt_DD_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_lt_DD"; then
+ :
+ fi
+else
+ ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
# Check whether --enable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then :
enableval=$enable_libtool_lock;
fi
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
- HPUX_IA64_MODE="32"
+ HPUX_IA64_MODE=32
;;
*ELF-64*)
- HPUX_IA64_MODE="64"
+ HPUX_IA64_MODE=64
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo '#line '$LINENO' "configure"' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
;;
*N32*)
LD="${LD-ld} -melf32bmipn32"
;;
*64-bit*)
@@ -6930,35 +7044,86 @@ ia64-*-hpux*)
LD="${LD-ld} -64"
;;
esac
fi
fi
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
case `/usr/bin/file conftest.o` in
*32-bit*)
case $host in
x86_64-*kfreebsd*-gnu)
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
;;
- ppc64-*linux*|powerpc64-*linux*)
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
LD="${LD-ld} -m elf_s390"
;;
sparc64-*linux*)
LD="${LD-ld} -m elf32_sparc"
;;
@@ -6967,17 +7132,20 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*
*64-bit*)
case $host in
x86_64-*kfreebsd*-gnu)
LD="${LD-ld} -m elf_x86_64_fbsd"
;;
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- ppc*-*linux*|powerpc*-*linux*)
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
LD="${LD-ld} -m elf64_s390"
;;
sparc*-*linux*)
LD="${LD-ld} -m elf64_sparc"
;;
@@ -6985,17 +7153,17 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
+ SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
if ${lt_cv_cc_needs_belf+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -7025,60 +7193,61 @@ rm -f core conftest.err conftest.$ac_obj
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
$as_echo "$lt_cv_cc_needs_belf" >&6; }
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+ CFLAGS=$SAVE_CFLAGS
fi
;;
*-*solaris*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
case `/usr/bin/file conftest.o` in
*64-bit*)
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
- i?86-*-solaris*)
+ i?86-*-solaris*|x86_64-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
LD="${LD-ld} -m elf64_sparc"
;;
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
- LD="${LD-ld}_sol2"
+ LD=${LD-ld}_sol2
fi
;;
*)
if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
LD="${LD-ld} -64"
fi
;;
esac
;;
esac
fi
rm -rf conftest*
;;
esac
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
set dummy ${ac_tool_prefix}mt; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
$as_echo_n "(cached) " >&6
@@ -7179,17 +7348,17 @@ else
cat conftest.err >&5
if $GREP 'Manifest Tool' conftest.out > /dev/null; then
lt_cv_path_mainfest_tool=yes
fi
rm -f conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
$as_echo "$lt_cv_path_mainfest_tool" >&6; }
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
MANIFEST_TOOL=:
fi
@@ -7682,17 +7851,17 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
$as_echo_n "checking for -single_module linker flag... " >&6; }
if ${lt_cv_apple_cc_single_mod+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
+ if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
# link flags.
rm -rf libconftest.dylib*
echo "int foo(void){return 1;}" > conftest.c
echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-dynamiclib -Wl,-single_module conftest.c" >&5
@@ -7700,17 +7869,17 @@ else
-dynamiclib -Wl,-single_module conftest.c 2>conftest.err
_lt_result=$?
# If there is a non-empty error log, and "single_module"
# appears in it, assume the flag caused a linker warning
if test -s conftest.err && $GREP single_module conftest.err; then
cat conftest.err >&5
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
- elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&5
fi
rm -rf libconftest.dylib*
rm -f conftest.*
fi
fi
@@ -7739,17 +7908,17 @@ main ()
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
lt_cv_ld_exported_symbols_list=yes
else
lt_cv_ld_exported_symbols_list=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
$as_echo_n "checking for -force_load linker flag... " >&6; }
if ${lt_cv_ld_force_load+:} false; then :
@@ -7768,62 +7937,97 @@ _LT_EOF
cat > conftest.c << _LT_EOF
int main() { return 0;}
_LT_EOF
echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&5
- elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&5
fi
rm -f conftest.err libconftest.a conftest conftest.c
rm -rf conftest.dSYM
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
$as_echo "$lt_cv_ld_force_load" >&6; }
case $host_os in
rhapsody* | darwin1.[012])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[91]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[012]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[012][,.]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
fi
;;
esac
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
$as_echo_n "checking for ANSI C header files... " >&6; }
if ${ac_cv_header_stdc+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
@@ -7978,24 +8182,24 @@ done
if test "${enable_shared+set}" = set; then :
enableval=$enable_shared; p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
enable_shared=yes
fi
@@ -8009,24 +8213,24 @@ fi
if test "${enable_static+set}" = set; then :
enableval=$enable_static; p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
enable_static=yes
fi
@@ -8040,74 +8244,124 @@ fi
# Check whether --with-pic was given.
if test "${with_pic+set}" = set; then :
withval=$with_pic; lt_p=${PACKAGE-default}
case $withval in
yes|no) pic_mode=$withval ;;
*)
pic_mode=default
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for lt_pkg in $withval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$lt_pkg" = "X$lt_p"; then
pic_mode=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
pic_mode=default
fi
-test -z "$pic_mode" && pic_mode=default
-
# Check whether --enable-fast-install was given.
if test "${enable_fast_install+set}" = set; then :
enableval=$enable_fast_install; p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
enable_fast_install=yes
fi
+ shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
+
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+ withval=$with_aix_soname; case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname
+else
+ if ${lt_cv_with_aix_soname+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_with_aix_soname=aix
+fi
+
+ with_aix_soname=$lt_cv_with_aix_soname
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+
+
+
+
+
+
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -8146,17 +8400,17 @@ test -z "$LN_S" && LN_S="ln -s"
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
$as_echo_n "checking for objdir... " >&6; }
if ${lt_cv_objdir+:} false; then :
$as_echo_n "(cached) " >&6
else
@@ -8185,82 +8439,75 @@ _ACEOF
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
+ if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
;;
esac
# Global variables:
ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
# Only perform the check for file, if the check method requires it
test -z "$MAGIC_CMD" && MAGIC_CMD=file
case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
if ${lt_cv_path_MAGIC_CMD+:} false; then :
$as_echo_n "(cached) " >&6
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/${ac_tool_prefix}file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -f "$ac_dir/${ac_tool_prefix}file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
else
cat <<_LT_EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -8273,23 +8520,23 @@ else
_LT_EOF
fi ;;
esac
fi
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac
fi
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -8301,32 +8548,32 @@ if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
$as_echo_n "checking for file... " >&6; }
if ${lt_cv_path_MAGIC_CMD+:} false; then :
$as_echo_n "(cached) " >&6
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -f "$ac_dir/file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
else
cat <<_LT_EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -8339,23 +8586,23 @@ else
_LT_EOF
fi ;;
esac
fi
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac
fi
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -8366,17 +8613,17 @@ fi
fi
fi
;;
esac
# Use C for the default configuration in the libtool script
-lt_save_CC="$CC"
+lt_save_CC=$CC
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
# Source file extension for C test sources.
@@ -8424,33 +8671,33 @@ eval "$ac_link" 2>&1 >/dev/null | $SED '
_lt_linker_boilerplate=`cat conftest.err`
$RM -r conftest*
if test -n "$compiler"; then
lt_prog_compiler_no_builtin_flag=
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $cc_basename in
nvcc*)
lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
*)
lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_rtti_exceptions=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
+ lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
@@ -8470,17 +8717,17 @@ else
fi
fi
$RM conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
else
:
fi
fi
@@ -8488,54 +8735,60 @@ fi
lt_prog_compiler_wl=
lt_prog_compiler_pic=
lt_prog_compiler_static=
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_static='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
fi
+ lt_prog_compiler_pic='-fPIC'
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
lt_prog_compiler_pic='-fPIC'
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
;;
esac
;;
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
lt_prog_compiler_pic='-fno-common'
;;
@@ -8596,55 +8849,74 @@ lt_prog_compiler_static=
fi
;;
esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
lt_prog_compiler_wl='-Wl,'
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
else
lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
fi
;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ esac
+ ;;
+
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
;;
hpux9* | hpux10* | hpux11*)
lt_prog_compiler_wl='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
*)
lt_prog_compiler_pic='+Z'
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static='${wl}-a ${wl}archive'
+ lt_prog_compiler_static='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
lt_prog_compiler_wl='-Wl,'
# PIC (with -KPIC) is the default.
lt_prog_compiler_static='-non_shared'
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
+ # old Intel for x86_64, which still supported -KPIC.
ecc*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-static'
;;
# icc used to be incompatible with GCC.
# ICC 10 doesn't accept -KPIC any more.
icc* | ifort*)
@@ -8659,16 +8931,22 @@ lt_prog_compiler_static=
lt_prog_compiler_static='--static'
;;
nagfor*)
# NAG Fortran compiler
lt_prog_compiler_wl='-Wl,-Wl,,'
lt_prog_compiler_pic='-PIC'
lt_prog_compiler_static='-Bstatic'
;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-fpic'
lt_prog_compiler_static='-Bstatic'
;;
ccc*)
@@ -8756,17 +9034,17 @@ lt_prog_compiler_static=
sysv4 | sysv4.2uw2* | sysv4.3*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
lt_prog_compiler_pic='-Kconform_pic'
lt_prog_compiler_static='-Bstatic'
fi
;;
sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
@@ -8785,17 +9063,17 @@ lt_prog_compiler_static=
*)
lt_prog_compiler_can_build_shared=no
;;
esac
fi
case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
+ # For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic=
;;
*)
lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
;;
esac
@@ -8817,17 +9095,17 @@ if test -n "$lt_prog_compiler_pic"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
if ${lt_cv_prog_compiler_pic_works+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_pic_works=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
@@ -8847,17 +9125,17 @@ else
fi
fi
$RM conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
case $lt_prog_compiler_pic in
"" | " "*) ;;
*) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
esac
else
lt_prog_compiler_pic=
lt_prog_compiler_can_build_shared=no
fi
@@ -8879,17 +9157,17 @@ fi
#
wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
if ${lt_cv_prog_compiler_static_works+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_static_works=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
@@ -8898,23 +9176,23 @@ else
if diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler_static_works=yes
fi
else
lt_cv_prog_compiler_static_works=yes
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works"; then
:
else
lt_prog_compiler_static=
fi
@@ -9024,32 +9302,32 @@ else
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
$as_echo_n "checking if we can lock with hard links... " >&6; }
hard_links=yes
$RM conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
$as_echo "$hard_links" >&6; }
- if test "$hard_links" = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ if test no = "$hard_links"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
need_locks=warn
fi
else
need_locks=no
fi
@@ -9082,52 +9360,52 @@ $as_echo_n "checking whether the $compil
old_archive_from_new_cmds=
old_archive_from_expsyms_cmds=
thread_safe_flag_spec=
whole_archive_flag_spec=
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
# Exclude shared library initialization/finalization symbols.
extract_expsyms_cmds=
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
interix*)
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
- openbsd*)
+ openbsd* | bitrig*)
with_gnu_ld=no
;;
esac
ld_shlibs=yes
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
# with the native linker. However, as the warning in the GNU ld
# block says, versions before 2.19.5* couldn't really create working
# shared libraries, regardless of the interface used.
case `$LD -v 2>&1` in
*\ \(GNU\ Binutils\)\ 2.19.5*) ;;
@@ -9139,47 +9417,47 @@ $as_echo_n "checking whether the $compil
esac
;;
*)
lt_use_gnu_ld_interface=yes
;;
esac
fi
- if test "$lt_use_gnu_ld_interface" = yes; then
+ if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+ wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ export_dynamic_flag_spec='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
whole_archive_flag_spec=
fi
supports_anon_versioning=no
- case `$LD -v 2>&1` in
+ case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
*\ 2.11.*) ;; # other 2.11 versions
*) supports_anon_versioning=yes ;;
esac
# See if GNU ld supports shared libraries.
case $host_os in
aix[3-9]*)
# On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
+ if test ia64 != "$host_cpu"; then
ld_shlibs=no
cat <<_LT_EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.19, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
*** really care for shared libraries, you may want to install binutils
*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
@@ -9188,166 +9466,199 @@ $as_echo_n "checking whether the $compil
_LT_EOF
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
;;
esac
;;
beos*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
allow_undefined_flag=unsupported
# Joseph Beckenbach says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
ld_shlibs=no
fi
;;
cygwin* | mingw* | pw32* | cegcc*)
# _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
- export_dynamic_flag_spec='${wl}--export-all-symbols'
+ export_dynamic_flag_spec='$wl--export-all-symbols'
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
ld_shlibs=no
fi
;;
haiku*)
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
link_all_deplibs=yes
;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
interix[3-9]*)
hardcode_direct=no
hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
+ if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
+ && test no = "$tmp_diet"
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
tmp_addflag=' -i_dynamic -nofor_main' ;;
ifc* | ifort*) # Intel Fortran compiler
tmp_addflag=' -nofor_main' ;;
lf95*) # Lahey Fortran 8.1
whole_archive_flag_spec=
tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
compiler_needs_object=yes
;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
compiler_needs_object=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
- archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
+ tcc*)
+ export_dynamic_flag_spec='-rdynamic'
+ ;;
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
else
ld_shlibs=no
fi
;;
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
solaris*)
if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
cat <<_LT_EOF 1>&2
@@ -9355,123 +9666,146 @@ _LT_EOF
*** create shared libraries on Solaris systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
case `$LD -v 2>&1` in
*\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
ld_shlibs=no
cat <<_LT_EOF 1>&2
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
_LT_EOF
;;
*)
# For security reasons, it is highly recommended that you always
# use absolute paths for naming shared libraries, and exclude the
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
esac
;;
sunos4*)
archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
esac
- if test "$ld_shlibs" = no; then
+ if test no = "$ld_shlibs"; then
runpath_var=
hardcode_libdir_flag_spec=
export_dynamic_flag_spec=
whole_archive_flag_spec=
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
allow_undefined_flag=unsupported
always_export_symbols=yes
archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct=unsupported
fi
;;
aix[4-9]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
@@ -9480,23 +9814,31 @@ _LT_EOF
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
archive_cmds=''
hardcode_direct=yes
hardcode_direct_absolute=yes
hardcode_libdir_separator=':'
link_all_deplibs=yes
- file_list_spec='${wl}-f,'
+ file_list_spec='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ ;;
+ esac
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
# We have reworked collect2
:
else
# We have old collect2
hardcode_direct=unsupported
@@ -9505,45 +9847,52 @@ _LT_EOF
# to unsupported forces relinking
hardcode_minus_L=yes
hardcode_libdir_flag_spec='-L$libdir'
hardcode_libdir_separator=
fi
;;
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- export_dynamic_flag_spec='${wl}-bexpall'
+ export_dynamic_flag_spec='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
allow_undefined_flag='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
+ if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath_+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
@@ -9568,35 +9917,35 @@ if ac_fn_c_try_link "$LINENO"; then :
# Check for a 64-bit object if we didn't find anything.
if test -z "$lt_cv_aix_libpath_"; then
lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_="/usr/lib:/lib"
+ lt_cv_aix_libpath_=/usr/lib:/lib
fi
fi
aix_libpath=$lt_cv_aix_libpath_
fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
allow_undefined_flag="-z nodefs"
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
+ if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath_+:} false; then :
$as_echo_n "(cached) " >&6
else
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
@@ -9621,48 +9970,60 @@ if ac_fn_c_try_link "$LINENO"; then :
# Check for a 64-bit object if we didn't find anything.
if test -z "$lt_cv_aix_libpath_"; then
lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_="/usr/lib:/lib"
+ lt_cv_aix_libpath_=/usr/lib:/lib
fi
fi
aix_libpath=$lt_cv_aix_libpath_
fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- no_undefined_flag=' ${wl}-bernotok'
- allow_undefined_flag=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ no_undefined_flag=' $wl-bernotok'
+ allow_undefined_flag=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec='$convenience'
fi
archive_cmds_need_lc=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
;;
esac
@@ -9682,55 +10043,56 @@ fi
# Native MSVC
hardcode_libdir_flag_spec=' '
allow_undefined_flag=unsupported
always_export_symbols=yes
file_list_spec='@'
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
enable_shared_with_static_runtimes=yes
exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
# Don't use ranlib
old_postinstall_cmds='chmod 644 $oldlib'
postlink_cmds='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# Assume MSVC wrapper
hardcode_libdir_flag_spec=' '
allow_undefined_flag=unsupported
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
old_archive_from_new_cmds='true'
# FIXME: Should let the user specify the lib program.
old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
enable_shared_with_static_runtimes=yes
;;
@@ -9739,34 +10101,34 @@ fi
darwin* | rhapsody*)
archive_cmds_need_lc=no
hardcode_direct=no
hardcode_automatic=yes
hardcode_shlibpath_var=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ if test yes = "$lt_cv_ld_force_load"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
else
whole_archive_flag_spec=''
fi
link_all_deplibs=yes
- allow_undefined_flag="$_lt_dar_allow_undefined"
+ allow_undefined_flag=$_lt_dar_allow_undefined
case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
- if test "$_lt_dar_can_shared" = "yes"; then
+ if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
- archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
else
ld_shlibs=no
fi
;;
dgux*)
@@ -9798,81 +10160,81 @@ fi
freebsd* | dragonfly*)
archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
hpux9*)
- if test "$GCC" = yes; then
- archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GCC"; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
- archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
;;
hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
fi
;;
hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
# Older versions of the 11.00 compiler do not understand -b yet
# (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
$as_echo_n "checking if $CC understands -b... " >&6; }
if ${lt_cv_prog_compiler__b+:} false; then :
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler__b=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS -b"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
@@ -9881,231 +10243,253 @@ else
if diff conftest.exp conftest.er2 >/dev/null; then
lt_cv_prog_compiler__b=yes
fi
else
lt_cv_prog_compiler__b=yes
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
$as_echo "$lt_cv_prog_compiler__b" >&6; }
-if test x"$lt_cv_prog_compiler__b" = xyes; then
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+if test yes = "$lt_cv_prog_compiler__b"; then
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
;;
esac
fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
case $host_cpu in
hppa*64*|ia64*)
hardcode_direct=no
hardcode_shlibpath_var=no
;;
*)
hardcode_direct=yes
hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
;;
esac
fi
;;
irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
# This should be the same for all languages, so no per-tag cache variable.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
if ${lt_cv_irix_exported_symbol+:} false; then :
$as_echo_n "(cached) " >&6
else
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int foo (void) { return 0; }
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
lt_cv_irix_exported_symbol=yes
else
lt_cv_irix_exported_symbol=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
$as_echo "$lt_cv_irix_exported_symbol" >&6; }
- if test "$lt_cv_irix_exported_symbol" = yes; then
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
fi
else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
inherit_rpath=yes
link_all_deplibs=yes
;;
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ ld_shlibs=yes
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
newsos6)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
hardcode_shlibpath_var=no
;;
*nto* | *qnx*)
;;
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
hardcode_direct=yes
hardcode_shlibpath_var=no
hardcode_direct_absolute=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
fi
else
ld_shlibs=no
fi
;;
os2*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
- archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
;;
osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
fi
archive_cmds_need_lc='no'
hardcode_libdir_separator=:
;;
solaris*)
no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
- wlarc='${wl}'
- archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ wlarc='$wl'
+ archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
hardcode_libdir_flag_spec='-R$libdir'
hardcode_shlibpath_var=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ if test yes = "$GCC"; then
+ whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
fi
;;
esac
link_all_deplibs=yes
;;
sunos4*)
- if test "x$host_vendor" = xsequent; then
+ if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
hardcode_libdir_flag_spec='-L$libdir'
hardcode_direct=yes
hardcode_minus_L=yes
hardcode_shlibpath_var=no
;;
@@ -10144,79 +10528,79 @@ $as_echo "$lt_cv_irix_exported_symbol" >
hardcode_shlibpath_var=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
ld_shlibs=yes
fi
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag='${wl}-z,text'
+ no_undefined_flag='$wl-z,text'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- no_undefined_flag='${wl}-z,text'
- allow_undefined_flag='${wl}-z,nodefs'
+ no_undefined_flag='$wl-z,text'
+ allow_undefined_flag='$wl-z,nodefs'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_flag_spec='$wl-R,$libdir'
hardcode_libdir_separator=':'
link_all_deplibs=yes
- export_dynamic_flag_spec='${wl}-Bexport'
+ export_dynamic_flag_spec='$wl-Bexport'
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
uts4*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_shlibpath_var=no
;;
*)
ld_shlibs=no
;;
esac
- if test x$host_vendor = xsni; then
+ if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- export_dynamic_flag_spec='${wl}-Blargedynsym'
+ export_dynamic_flag_spec='$wl-Blargedynsym'
;;
esac
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
$as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
+test no = "$ld_shlibs" && can_build_shared=no
with_gnu_ld=$with_gnu_ld
@@ -10232,17 +10616,17 @@ with_gnu_ld=$with_gnu_ld
#
# Do we need to explicitly link libc?
#
case "x$archive_cmds_need_lc" in
x|xyes)
# Assume -lc should be added
archive_cmds_need_lc=yes
- if test "$enable_shared" = yes && test "$GCC" = yes; then
+ if test yes,yes = "$GCC,$enable_shared"; then
case $archive_cmds in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
'$CC '*)
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
@@ -10447,238 +10831,297 @@ esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
$as_echo_n "checking dynamic linker characteristics... " >&6; }
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
esac
case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
*\;*)
# if the path contains ";" then we assume it to be the separator
# otherwise default to the standard path separator (i.e. ":") - it is
# assumed that no part of a normal pathname contains ";" but that should
# okay in the real world where ";" in dirpaths is itself problematic.
lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
;;
*)
lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
+ # and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
+ lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
}
}
}
if (lt_foo != "") { lt_freq[lt_foo]++; }
if (lt_freq[lt_foo] == 1) { print lt_foo; }
}'`
# AWK program above erroneously prepends '/' to C:/dos/paths
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
fi
library_names_spec=
libname_spec='lib$name'
soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
need_lib_prefix=unknown
hardcode_into_libs=no
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown
+
+
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ soname_spec='$libname$release$shared_ext$major'
;;
aix[4-9]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib.so
# instead of lib.a to let people know that these are not
# typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a(lib.so.V)'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
shlibpath_var=LIBPATH
fi
;;
amigaos*)
case $host_cpu in
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
- library_names_spec='${libname}${shared_ext}'
+ library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi[45]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
# the default ld.so.conf also contains /usr/contrib/lib and
# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
# libtool to hard-code these into programs
;;
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
- shrext_cmds=".dll"
+ shrext_cmds=.dll
need_version=no
need_lib_prefix=no
case $GCC,$cc_basename in
yes,*)
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
chmod a+x \$dldir/$dlname~
if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
fi'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
;;
*,cl*)
# Native MSVC
libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
sys_lib_search_path_spec=
lt_save_ifs=$IFS
IFS=';'
for lt_path in $LIB
do
@@ -10695,72 +11138,72 @@ cygwin* | mingw* | pw32* | cegcc*)
# Convert to unix form, then to dos form, then back to unix form
# but this time dos style (no spaces!) so that the unix form looks
# like /cygdrive/c/PROGRA~1:/cygdr...
sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
- sys_lib_search_path_spec="$LIB"
+ sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
# FIXME: find the short name or the path components, as spaces are
# common. (e.g. "Program Files" -> "PROGRA~1")
;;
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$RM \$dlpath'
shlibpath_overrides_runpath=yes
dynamic_linker='Win32 link.exe'
;;
*)
# Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
darwin* | rhapsody*)
dynamic_linker="$host_os dyld"
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
dgux*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
freebsd* | dragonfly*)
# DragonFly does not have aout. When/if they implement a new
# versioning mechanism, adjust this.
if test -x /usr/bin/objformat; then
objformat=`/usr/bin/objformat`
@@ -10768,22 +11211,23 @@ freebsd* | dragonfly*)
case $host_os in
freebsd[23].*) objformat=aout ;;
*) objformat=elf ;;
esac
fi
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
freebsd2.*)
shlibpath_overrides_runpath=yes
;;
@@ -10798,36 +11242,25 @@ freebsd* | dragonfly*)
;;
*) # from 4.6 on, and DragonFly
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
esac
;;
-gnu*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
version_type=sunos
@@ -10835,77 +11268,78 @@ hpux9* | hpux10* | hpux11*)
need_version=no
case $host_cpu in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext_cmds='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
postinstall_cmds='chmod 555 $lib'
# or fails outright, so override atomically:
install_override_mode=555
;;
interix[3-9]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
fi ;;
esac
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
*)
case $LD in # libtool.m4 will add one of these switches to LD
*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
libsuff= shlibsuff= libmagic=32-bit;;
@@ -10914,33 +11348,53 @@ irix5* | irix6* | nonstopux*)
*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
libsuff=64 shlibsuff=64 libmagic=64-bit;;
*) libsuff= shlibsuff= libmagic=never-match;;
esac
;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
dynamic_linker=no
;;
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
# Some binutils ld are patched to set DT_RUNPATH
if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
$as_echo_n "(cached) " >&6
else
@@ -10974,17 +11428,22 @@ fi
shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
- # Append ld.so.conf contents to the search path
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
@@ -10994,127 +11453,137 @@ fi
dynamic_linker='GNU/Linux ld.so'
;;
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
*nto* | *qnx*)
version_type=qnx
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
-openbsd*)
+openbsd* | bitrig*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
else
- shlibpath_overrides_runpath=yes
+ need_version=yes
fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
- shrext_cmds=".dll"
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
dynamic_linker=no
;;
solaris*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
# ldd complains unless libraries are executable
postinstall_cmds='chmod +x $lib'
;;
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
;;
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
runpath_var=LD_RUN_PATH
;;
siemens)
@@ -11125,34 +11594,34 @@ sysv4 | sysv4.3*)
need_version=no
shlibpath_overrides_runpath=no
sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
;;
esac
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
+ version_type=sco
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
case $host_os in
sco3.2v5*)
sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
;;
esac
@@ -11160,49 +11629,64 @@ sysv5* | sco3.2v5* | sco5v6* | unixware*
sys_lib_dlsearch_path_spec='/usr/lib'
;;
tpf*)
# TPF is a cross-target only. Preferred cross-host = GNU/Linux.
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
*)
dynamic_linker=no
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
@@ -11289,81 +11773,81 @@ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" ||
test -n "$runpath_var" ||
- test "X$hardcode_automatic" = "Xyes" ; then
+ test yes = "$hardcode_automatic"; then
# We can hardcode non-existent directories.
- if test "$hardcode_direct" != no &&
+ if test no != "$hardcode_direct" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
- test "$hardcode_minus_L" != no; then
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+ test no != "$hardcode_minus_L"; then
# Linking always hardcodes the temporary library directory.
hardcode_action=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
hardcode_action=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
hardcode_action=unsupported
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
$as_echo "$hardcode_action" >&6; }
-if test "$hardcode_action" = relink ||
- test "$inherit_rpath" = yes; then
+if test relink = "$hardcode_action" ||
+ test yes = "$inherit_rpath"; then
# Fast installation is not supported
enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
- if test "x$enable_dlopen" != xyes; then
+ if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
else
lt_cv_dlopen=no
lt_cv_dlopen_libs=
case $host_os in
beos*)
- lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
- # if libdl is installed we need to link against it
+ # if libdl is installed we need to link against it
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
if ${ac_cv_lib_dl_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -11391,31 +11875,39 @@ else
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
else
- lt_cv_dlopen="dyld"
+ lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
fi
;;
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
*)
ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
if test "x$ac_cv_func_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load"
+ lt_cv_dlopen=shl_load
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
$as_echo_n "checking for shl_load in -ldld... " >&6; }
if ${ac_cv_lib_dld_shl_load+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
@@ -11444,21 +11936,21 @@ else
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+ lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
else
ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
if test "x$ac_cv_func_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
if ${ac_cv_lib_dl_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
@@ -11487,17 +11979,17 @@ else
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
$as_echo_n "checking for dlopen in -lsvld... " >&6; }
if ${ac_cv_lib_svld_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lsvld $LIBS"
@@ -11526,17 +12018,17 @@ else
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
$as_echo_n "checking for dld_link in -ldld... " >&6; }
if ${ac_cv_lib_dld_dld_link+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
@@ -11565,17 +12057,17 @@ else
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+ lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
fi
fi
fi
@@ -11586,39 +12078,39 @@ fi
fi
fi
;;
esac
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
+ if test no = "$lt_cv_dlopen"; then
enable_dlopen=no
+ else
+ enable_dlopen=yes
fi
case $lt_cv_dlopen in
dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- save_LIBS="$LIBS"
+ save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
$as_echo_n "checking whether a program can dlopen itself... " >&6; }
if ${lt_cv_dlopen_self+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test "$cross_compiling" = yes; then :
+ if test yes = "$cross_compiling"; then :
lt_cv_dlopen_self=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
#line $LINENO "configure"
#include "confdefs.h"
@@ -11655,19 +12147,19 @@ else
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
@@ -11687,17 +12179,17 @@ int main ()
return status;
}
_LT_EOF
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
esac
else :
@@ -11707,24 +12199,24 @@ _LT_EOF
fi
rm -fr conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
$as_echo "$lt_cv_dlopen_self" >&6; }
- if test "x$lt_cv_dlopen_self" = xyes; then
+ if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
if ${lt_cv_dlopen_self_static+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test "$cross_compiling" = yes; then :
+ if test yes = "$cross_compiling"; then :
lt_cv_dlopen_self_static=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
#line $LINENO "configure"
#include "confdefs.h"
@@ -11761,19 +12253,19 @@ else
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
int fnord () { return 42; }
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
@@ -11793,17 +12285,17 @@ int main ()
return status;
}
_LT_EOF
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
esac
else :
@@ -11814,19 +12306,19 @@ fi
rm -fr conftest*
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
$as_echo "$lt_cv_dlopen_self_static" >&6; }
fi
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
;;
esac
case $lt_cv_dlopen_self in
yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
*) enable_dlopen_self=unknown ;;
esac
@@ -11860,17 +12352,17 @@ if test -n "$STRIP" && $STRIP -V 2>&1 |
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
- if test -n "$STRIP" ; then
+ if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -11888,64 +12380,68 @@ fi
- # Report which library types will actually be built
+ # Report what library types will actually be built
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
$as_echo_n "checking if libtool supports shared libraries... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
$as_echo "$can_build_shared" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
$as_echo_n "checking whether to build shared libraries... " >&6; }
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[4-9]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
$as_echo "$enable_shared" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
$as_echo_n "checking whether to build static libraries... " >&6; }
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
$as_echo "$enable_static" >&6; }
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-CC="$lt_save_CC"
+CC=$lt_save_CC
@@ -13330,16 +13826,17 @@ AS='`$ECHO "$AS" | $SED "$delay_single_q
DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
@@ -13369,20 +13866,23 @@ old_postuninstall_cmds='`$ECHO "$old_pos
old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
@@ -13437,17 +13937,18 @@ library_names_spec='`$ECHO "$library_nam
soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
LTCC='$LTCC'
@@ -13489,19 +13990,22 @@ AR_FLAGS \
archiver_list_spec \
STRIP \
RANLIB \
CC \
CFLAGS \
compiler \
lt_cv_sys_global_symbol_pipe \
lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
lt_cv_sys_global_symbol_to_c_name_address \
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
nm_file_list_spec \
+lt_cv_truncate_bin \
lt_prog_compiler_no_builtin_flag \
lt_prog_compiler_pic \
lt_prog_compiler_wl \
lt_prog_compiler_static \
lt_cv_prog_compiler_c_o \
need_locks \
MANIFEST_TOOL \
DSYMUTIL \
@@ -13526,17 +14030,17 @@ libname_spec \
library_names_spec \
soname_spec \
install_override_mode \
finish_eval \
old_striplib \
striplib; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
;;
esac
done
# Double-quote double-evaled strings.
@@ -13553,41 +14057,39 @@ module_cmds \
module_expsym_cmds \
export_symbols_cmds \
prelink_cmds \
postlink_cmds \
postinstall_cmds \
postuninstall_cmds \
finish_cmds \
sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec; do
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
;;
esac
done
ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
PACKAGE='$PACKAGE'
VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'
_ACEOF
@@ -14288,65 +14790,63 @@ $as_echo X"$file" |
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
}
;;
"libtool":C)
- # See if we are running on zsh, and set the options which allow our
+ # See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
+ if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
- cfgfile="${ofile}T"
+ cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see .
# The names of the tagged configurations supported by this script.
-available_tags=""
+available_tags=''
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
# ### BEGIN LIBTOOL CONFIG
# A sed program that does not truncate output.
SED=$lt_SED
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="\$SED -e 1s/^X//"
@@ -14386,16 +14886,19 @@ build_libtool_libs=$enable_shared
build_old_libs=$enable_static
# What type of objects to build.
pic_mode=$pic_mode
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
# The PATH separator for the build system.
PATH_SEPARATOR=$lt_PATH_SEPARATOR
# The host system.
host_alias=$host_alias
host=$host
host_os=$host_os
@@ -14476,28 +14979,37 @@ LTCC=$lt_CC
LTCFLAGS=$lt_CFLAGS
# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
# Transform the output of nm in a proper C declaration.
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
# Transform the output of nm in a C name address pair.
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
# Specify filename containing input files for \$NM.
nm_file_list_spec=$lt_nm_file_list_spec
-# The root where to search for dependent libraries,and in which our libraries should be installed.
+# The root where to search for dependent libraries,and where our libraries should be installed.
lt_sysroot=$lt_sysroot
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
# The name of the directory that contains temporary libtool files.
objdir=$objdir
# Used to examine libraries when file_magic_cmd begins with "file".
MAGIC_CMD=$MAGIC_CMD
# Must we lock files when doing compilation?
need_locks=$lt_need_locks
@@ -14578,18 +15090,21 @@ finish_cmds=$lt_finish_cmds
finish_eval=$lt_finish_eval
# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs
# Compile-time system search path for libraries.
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self
# Whether dlopen of statically linked programs is supported.
@@ -14672,23 +15187,23 @@ no_undefined_flag=$lt_no_undefined_flag
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute
# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L
# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
@@ -14730,200 +15245,100 @@ file_list_spec=$lt_file_list_spec
# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action
# ### END LIBTOOL CONFIG
_LT_EOF
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
_LT_EOF
;;
esac
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
# We use sed instead of cat because bash on DJGPP gets confused if
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
- if test x"$xsi_shell" = xyes; then
- sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-func_dirname ()\
-{\
-\ case ${1} in\
-\ */*) func_dirname_result="${1%/*}${2}" ;;\
-\ * ) func_dirname_result="${3}" ;;\
-\ esac\
-} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_basename ()$/,/^} # func_basename /c\
-func_basename ()\
-{\
-\ func_basename_result="${1##*/}"\
-} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-func_dirname_and_basename ()\
-{\
-\ case ${1} in\
-\ */*) func_dirname_result="${1%/*}${2}" ;;\
-\ * ) func_dirname_result="${3}" ;;\
-\ esac\
-\ func_basename_result="${1##*/}"\
-} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-func_stripname ()\
-{\
-\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-\ # positional parameters, so assign one to ordinary parameter first.\
-\ func_stripname_result=${3}\
-\ func_stripname_result=${func_stripname_result#"${1}"}\
-\ func_stripname_result=${func_stripname_result%"${2}"}\
-} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-func_split_long_opt ()\
-{\
-\ func_split_long_opt_name=${1%%=*}\
-\ func_split_long_opt_arg=${1#*=}\
-} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-func_split_short_opt ()\
-{\
-\ func_split_short_opt_arg=${1#??}\
-\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-func_lo2o ()\
-{\
-\ case ${1} in\
-\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-\ *) func_lo2o_result=${1} ;;\
-\ esac\
-} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_xform ()$/,/^} # func_xform /c\
-func_xform ()\
-{\
- func_xform_result=${1%.*}.lo\
-} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_arith ()$/,/^} # func_arith /c\
-func_arith ()\
-{\
- func_arith_result=$(( $* ))\
-} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_len ()$/,/^} # func_len /c\
-func_len ()\
-{\
- func_len_result=${#1}\
-} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-fi
-
-if test x"$lt_shell_append" = xyes; then
- sed -e '/^func_append ()$/,/^} # func_append /c\
-func_append ()\
-{\
- eval "${1}+=\\${2}"\
-} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-func_append_quoted ()\
-{\
-\ func_quote_for_eval "${2}"\
-\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- # Save a `func_append' function call where possible by direct use of '+='
- sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-else
- # Save a `func_append' function call even when '+=' is not available
- sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-fi
-
-
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
;;
"libpng-config":F) chmod +x libpng-config ;;
esac
diff --git libpng-1.2.53rc02/depcomp ag/depcomp
--- libpng-1.2.53rc02/depcomp 2013-12-31 21:21:52.000000000 -0600
+++ ag/depcomp 2015-02-21 13:51:08.914737048 -0600
@@ -1,14 +1,14 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
scriptversion=2013-05-30.07; # UTC
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git libpng-1.2.53rc02/install-sh ag/install-sh
--- libpng-1.2.53rc02/install-sh 2013-12-31 21:21:52.000000000 -0600
+++ ag/install-sh 2015-02-21 13:51:08.853661733 -0600
@@ -1,12 +1,12 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2011-11-20.07; # UTC
+scriptversion=2013-12-25.23; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
@@ -36,54 +36,39 @@ scriptversion=2011-11-20.07; # UTC
#
# Calling this script install-sh is preferred over install.sh, to prevent
# 'make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
+tab=' '
nl='
'
-IFS=" "" $nl"
+IFS=" $tab$nl"
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
-# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
posix_mkdir=
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
@@ -92,17 +77,17 @@ rmcmd="$rmprog -f"
stripcmd=
src=
dst=
dir_arg=
dst_arg=
copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
@@ -132,56 +117,67 @@ while test $# -ne 0; do
case $1 in
-c) ;;
-C) copy_on_change=true;;
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
- shift;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+ case $mode in
+ *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift;;
+ shift;;
-s) stripcmd=$stripprog;;
- -t) dst_arg=$2
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- shift;;
+ -t)
+ is_target_a_directory=always
+ dst_arg=$2
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
- -T) no_target_directory=true;;
+ -T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;;
- --) shift
- break;;
+ --) shift
+ break;;
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
*) break;;
esac
shift
done
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+ if test -n "$dst_arg"; then
+ echo "$0: target directory not allowed when installing a directory." >&2
+ exit 1
+ fi
+fi
+
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
@@ -203,41 +199,50 @@ if test $# -eq 0; then
exit 1
fi
# It's OK to call 'install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
+ if test $# -gt 1 || test "$is_target_a_directory" = always; then
+ if test ! -d "$dst_arg"; then
+ echo "$0: $dst_arg: Is not a directory." >&2
+ exit 1
+ fi
+ fi
+fi
+
+if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
trap "ret=130; $do_exit" 2
trap "ret=141; $do_exit" 13
trap "ret=143; $do_exit" 15
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
# Optimize common cases.
*644) cp_umask=133;;
*755) cp_umask=22;;
*[0-7])
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw='% 200'
+ u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw=,u+rw
+ u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
fi
for src
do
# Protect names problematic for 'test' and other utilities.
@@ -264,185 +269,157 @@ do
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dst_arg
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
+ if test "$is_target_a_directory" = never; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
+ dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
fi
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
esac
if
$posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
# The umask is ridiculous, or mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix='/';;
- [-=\(\)!]*) prefix='./';;
- *) prefix='';;
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
esac
- eval "$initialize_posix_glob"
-
oIFS=$IFS
IFS=/
- $posix_glob set -f
+ set -f
set fnord $dstdir
shift
- $posix_glob set +f
+ set +f
IFS=$oIFS
prefixes=
for d
do
- test X"$d" = X && continue
+ test X"$d" = X && continue
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
done
if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
@@ -467,55 +444,52 @@ do
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+ set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
+ set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
rm -f "$dsttmp"
else
# Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
trap '' 0
fi
done
# Local variables:
diff --git libpng-1.2.53rc02/ltmain.sh ag/ltmain.sh
--- libpng-1.2.53rc02/ltmain.sh 2013-12-31 21:21:52.000000000 -0600
+++ ag/ltmain.sh 2015-02-21 13:51:06.548529428 -0600
@@ -1,14 +1,17 @@
+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+## by inline-source v2014-01-03.01
-# libtool (GNU libtool) 2.4.2
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
# Written by Gordon Matzigkeit , 1996
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
@@ -18,891 +21,2122 @@
# same distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see .
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-# --config show all configuration variables
-# --debug enable verbose shell tracing
-# -n, --dry-run display commands without modifying any files
-# --features display basic configuration information and exit
-# --mode=MODE use operation mode MODE
-# --preserve-dup-deps don't remove duplicate dependency libraries
-# --quiet, --silent don't print informational messages
-# --no-quiet, --no-silent
-# print informational messages (default)
-# --no-warn don't display warning messages
-# --tag=TAG use configuration variables from tag TAG
-# -v, --verbose print more informational messages than default
-# --no-verbose don't print the extra informational messages
-# --version print version information
-# -h, --help, --help-all print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-# clean remove files from the build directory
-# compile compile a source file into a libtool object
-# execute automatically set library path, then run a program
-# finish complete the installation of libtool libraries
-# install install libraries or executables
-# link create a library or an executable
-# uninstall remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE. When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-# host-triplet: $host
-# shell: $SHELL
-# compiler: $LTCC
-# compiler flags: $LTCFLAGS
-# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool) 2.4.2
-# automake: $automake_version
-# autoconf: $autoconf_version
-#
-# Report bugs to .
-# GNU libtool home page: .
-# General help using GNU software: .
PROGRAM=libtool
PACKAGE=libtool
-VERSION=2.4.2
-TIMESTAMP=""
-package_revision=1.3337
+VERSION=2.4.6
+package_revision=2.4.6
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see .
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
- lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ eval "if test set = \"\${$_G_var+set}\"; then
+ save_$_G_var=\$$_G_var
+ $_G_var=C
+ export $_G_var
+ _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+ _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
fi"
done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
-$lt_unset CDPATH
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp $nl"
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+ _G_progs_list=$1
+ _G_check_func=$2
+ _G_PATH=${3-"$PATH"}
+
+ _G_path_prog_max=0
+ _G_path_prog_found=false
+ _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+ for _G_dir in $_G_PATH; do
+ IFS=$_G_save_IFS
+ test -z "$_G_dir" && _G_dir=.
+ for _G_prog_name in $_G_progs_list; do
+ for _exeext in '' .EXE; do
+ _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+ func_executable_p "$_G_path_prog" || continue
+ case `"$_G_path_prog" --version 2>&1` in
+ *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+ *) $_G_check_func $_G_path_prog
+ func_path_progs_result=$func_check_prog_result
+ ;;
+ esac
+ $_G_path_prog_found && break 3
+ done
+ done
+ done
+ IFS=$_G_save_IFS
+ test -z "$func_path_progs_result" && {
+ echo "no acceptable sed could be found in \$PATH" >&2
+ exit 1
+ }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+ _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for _G_i in 1 2 3 4 5 6 7; do
+ _G_sed_script=$_G_sed_script$nl$_G_sed_script
+ done
+ echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+ _G_sed_script=
+
+ func_check_prog_sed ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo '' >> conftest.nl
+ "$_G_path_prog" -f conftest.sed conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+ rm -f conftest.sed
+ SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+ func_check_prog_grep ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ _G_path_prog_max=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo 'GREP' >> conftest.nl
+ "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+ GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables. These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
: ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
: ${MAKE="make"}
: ${MKDIR="mkdir"}
: ${MV="mv -f"}
: ${RM="rm -f"}
: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-} # func_dirname may be replaced by extended shell implementation
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
- func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
- esac
-} # func_stripname may be replaced by extended shell implementation
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same. If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion. Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+ s/$_G_bs4/&\\
+/g
+ s/^$_G_bs2$_G_dollar/$_G_bs&/
+ s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+ s/\n//g"
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
- s@/\./@/@g
- t dotsl
- s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
+
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-# value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
- # Start from root dir and reassemble the path.
- func_normal_abspath_result=
- func_normal_abspath_tpath=$1
- func_normal_abspath_altnamespace=
- case $func_normal_abspath_tpath in
- "")
- # Empty path, that just means $cwd.
- func_stripname '' '/' "`pwd`"
- func_normal_abspath_result=$func_stripname_result
- return
- ;;
- # The next three entries are used to spot a run of precisely
- # two leading slashes without using negated character classes;
- # we take advantage of case's first-match behaviour.
- ///*)
- # Unusual form of absolute path, do nothing.
- ;;
- //*)
- # Not necessarily an ordinary path; POSIX reserves leading '//'
- # and for example Cygwin uses it to access remote file shares
- # over CIFS/SMB, so we conserve a leading double slash if found.
- func_normal_abspath_altnamespace=/
- ;;
- /*)
- # Absolute path, do nothing.
- ;;
- *)
- # Relative path, prepend $cwd.
- func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
- ;;
- esac
- # Cancel out all the simple stuff to save iterations. We also want
- # the path to end with a slash for ease of parsing, so make sure
- # there is one (and only one) here.
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
- while :; do
- # Processed it all yet?
- if test "$func_normal_abspath_tpath" = / ; then
- # If we ascended to the root using ".." the result may be empty now.
- if test -z "$func_normal_abspath_result" ; then
- func_normal_abspath_result=/
- fi
- break
- fi
- func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcar"`
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcdr"`
- # Figure out what to do with it
- case $func_normal_abspath_tcomponent in
- "")
- # Trailing empty path component, ignore it.
- ;;
- ..)
- # Parent dir; strip last assembled component from result.
- func_dirname "$func_normal_abspath_result"
- func_normal_abspath_result=$func_dirname_result
- ;;
- *)
- # Actual path component, append it.
- func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
- ;;
- esac
- done
- # Restore leading double-slash if one was found on entry.
- func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-# value returned in "$func_relative_path_result"
-func_relative_path ()
-{
- func_relative_path_result=
- func_normal_abspath "$1"
- func_relative_path_tlibdir=$func_normal_abspath_result
- func_normal_abspath "$2"
- func_relative_path_tbindir=$func_normal_abspath_result
-
- # Ascend the tree starting from libdir
- while :; do
- # check if we have found a prefix of bindir
- case $func_relative_path_tbindir in
- $func_relative_path_tlibdir)
- # found an exact match
- func_relative_path_tcancelled=
- break
- ;;
- $func_relative_path_tlibdir*)
- # found a matching prefix
- func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
- func_relative_path_tcancelled=$func_stripname_result
- if test -z "$func_relative_path_result"; then
- func_relative_path_result=.
- fi
- break
- ;;
- *)
- func_dirname $func_relative_path_tlibdir
- func_relative_path_tlibdir=${func_dirname_result}
- if test "x$func_relative_path_tlibdir" = x ; then
- # Have to descend all the way to the root!
- func_relative_path_result=../$func_relative_path_result
- func_relative_path_tcancelled=$func_relative_path_tbindir
- break
- fi
- func_relative_path_result=../$func_relative_path_result
- ;;
- esac
- done
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
- # Now calculate path; take care to avoid doubling-up slashes.
- func_stripname '' '/' "$func_relative_path_result"
- func_relative_path_result=$func_stripname_result
- func_stripname '/' '/' "$func_relative_path_tcancelled"
- if test "x$func_stripname_result" != x ; then
- func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
- fi
+# By convention, finish your script with:
+#
+# exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
- # Normalisation. If bindir is libdir, return empty string,
- # else relative path ending with a slash; either way, target
- # file name can be directly appended.
- if test ! -z "$func_relative_path_result"; then
- func_stripname './' '' "$func_relative_path_result/"
- func_relative_path_result=$func_stripname_result
- fi
-}
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath=$0
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
-# Make sure we have an absolute path for reexecution:
+# Make sure we have an absolute progpath for reexecution:
case $progpath in
[\\/]*|[A-Za-z]:\\*) ;;
*[\\/]*)
- progdir=$func_dirname_result
+ progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
progdir=`cd "$progdir" && pwd`
- progpath="$progdir/$progname"
+ progpath=$progdir/$progname
;;
*)
- save_IFS="$IFS"
+ _G_IFS=$IFS
IFS=${PATH_SEPARATOR-:}
for progdir in $PATH; do
- IFS="$save_IFS"
+ IFS=$_G_IFS
test -x "$progdir/$progname" && break
done
- IFS="$save_IFS"
+ IFS=$_G_IFS
test -n "$progdir" || progdir=`pwd`
- progpath="$progdir/$progname"
+ progpath=$progdir/$progname
;;
esac
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes. A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
- s/$bs4/&\\
-/g
- s/^$bs2$dollar/$bs&/
- s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
- s/\n//g"
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
+
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
-# Standard options:
opt_dry_run=false
-opt_help=false
opt_quiet=false
opt_verbose=false
-opt_warning=:
-
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
-{
- $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
-}
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
- $opt_verbose && func_echo ${1+"$@"}
+# Categories 'all' and 'none' are always available. Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
+
+# By default, display warnings according to 'opt_warning_types'. Set
+# 'warning_func' to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
+
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
+
+
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
+
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
+
+
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
+{
+ $debug_cmd
+
+ test -t 1 && {
+ # COLORTERM and USE_ANSI_COLORS environment variables take
+ # precedence, because most terminfo databases neglect to describe
+ # whether color sequences are supported.
+ test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+ if test 1 = "$USE_ANSI_COLORS"; then
+ # Standard ANSI escape sequences
+ tc_reset='[0m'
+ tc_bold='[1m'; tc_standout='[7m'
+ tc_red='[31m'; tc_green='[32m'
+ tc_blue='[34m'; tc_cyan='[36m'
+ else
+ # Otherwise trust the terminfo database after all.
+ test -n "`tput sgr0 2>/dev/null`" && {
+ tc_reset=`tput sgr0`
+ test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+ tc_standout=$tc_bold
+ test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+ test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+ test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+ test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+ test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+ }
+ fi
+ }
- # A bug in bash halts the script if the last line of a function
- # fails when set -e is in force, so we need another command to
- # work around that:
- :
+ require_term_colors=:
}
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
- $ECHO "$*"
-}
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
-{
- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
-}
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
- # bash bug again:
- :
-}
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
-{
- func_error ${1+"$@"}
- exit $EXIT_FAILURE
-}
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
- func_error ${1+"$@"}
- func_fatal_error "$help"
-}
-help="Try \`$progname --help' for more information." ## default
+ # We should try to minimise forks, especially on Windows where they are
+ # unreasonably slow, so skip the feature probes when bash or zsh are
+ # being used:
+ if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+ : ${_G_HAVE_ARITH_OP="yes"}
+ : ${_G_HAVE_XSI_OPS="yes"}
+ # The += operator was introduced in bash 3.1
+ case $BASH_VERSION in
+ [12].* | 3.0 | 3.0*) ;;
+ *)
+ : ${_G_HAVE_PLUSEQ_OP="yes"}
+ ;;
+ esac
+ fi
+ # _G_HAVE_PLUSEQ_OP
+ # Can be empty, in which case the shell is probed, "yes" if += is
+ # useable or anything else if it does not work.
+ test -z "$_G_HAVE_PLUSEQ_OP" \
+ && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+ && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_append ()
+ {
+ $debug_cmd
+
+ eval "$1+=\$2"
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_append ()
+ {
+ $debug_cmd
+
+ eval "$1=\$$1\$2"
+ }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+ eval 'func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1+=\\ \$func_quote_for_eval_result"
+ }'
+else
+ func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1=\$$1\\ \$func_quote_for_eval_result"
+ }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE. For example:
+#
+# func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+ $debug_cmd
+
+ eval _G_current_value='`$ECHO $'$1'`'
+ _G_delim=`expr "$2" : '\(.\)'`
+
+ case $_G_delim$_G_current_value$_G_delim in
+ *"$2$_G_delim"*) ;;
+ *) func_append "$@" ;;
+ esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+ test -z "$_G_HAVE_ARITH_OP" \
+ && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+ && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+ eval 'func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=$(( $* ))
+ }'
+else
+ func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=`expr "$@"`
+ }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ # If this shell supports suffix pattern removal, then use it to avoid
+ # forking. Hide the definitions single quotes in case the shell chokes
+ # on unsupported syntax...
+ _b='func_basename_result=${1##*/}'
+ _d='case $1 in
+ */*) func_dirname_result=${1%/*}$2 ;;
+ * ) func_dirname_result=$3 ;;
+ esac'
+
+else
+ # ...otherwise fall back to using sed.
+ _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+ _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"`
+ if test "X$func_dirname_result" = "X$1"; then
+ func_dirname_result=$3
+ else
+ func_append func_dirname_result "$2"
+ fi'
+fi
+
+eval 'func_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+eval 'func_dirname ()
+{
+ $debug_cmd
-# func_grep expression filename
+ '"$_d"'
+}'
+
+
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+ '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+ $debug_cmd
+
+ _G_message=$*
+
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ _G_infix=$1; shift
+ _G_indent=$_G_infix
+ _G_prefix="$progname: $_G_infix: "
+ _G_message=$*
+
+ # Strip color escape sequences before counting printable length
+ for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+ do
+ test -n "$_G_tc" && {
+ _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+ _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+ }
+ done
+ _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes
+
+ func_echo_infix_1_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_infix_1_IFS
+ $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+ _G_prefix=$_G_indent
+ done
+ IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ $debug_cmd
+
+ func_error "$*"
+ exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
# Check whether EXPRESSION matches any line of FILENAME, without output.
func_grep ()
{
+ $debug_cmd
+
$GREP "$1" "$2" >/dev/null 2>&1
}
-# func_mkdir_p directory-path
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+ test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=${#1}
+ }'
+else
+ func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+ }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
# Make sure the entire path to DIRECTORY-PATH is available.
func_mkdir_p ()
{
- my_directory_path="$1"
- my_dir_list=
+ $debug_cmd
+
+ _G_directory_path=$1
+ _G_dir_list=
- if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+ if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
- # Protect directory names starting with `-'
- case $my_directory_path in
- -*) my_directory_path="./$my_directory_path" ;;
+ # Protect directory names starting with '-'
+ case $_G_directory_path in
+ -*) _G_directory_path=./$_G_directory_path ;;
esac
# While some portion of DIR does not yet exist...
- while test ! -d "$my_directory_path"; do
+ while test ! -d "$_G_directory_path"; do
# ...make a list in topmost first order. Use a colon delimited
# list incase some portion of path contains whitespace.
- my_dir_list="$my_directory_path:$my_dir_list"
+ _G_dir_list=$_G_directory_path:$_G_dir_list
# If the last portion added has no slash in it, the list is done
- case $my_directory_path in */*) ;; *) break ;; esac
+ case $_G_directory_path in */*) ;; *) break ;; esac
# ...otherwise throw away the child directory and loop
- my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+ _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
done
- my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+ _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
- save_mkdir_p_IFS="$IFS"; IFS=':'
- for my_dir in $my_dir_list; do
- IFS="$save_mkdir_p_IFS"
- # mkdir can fail with a `File exist' error if two processes
+ func_mkdir_p_IFS=$IFS; IFS=:
+ for _G_dir in $_G_dir_list; do
+ IFS=$func_mkdir_p_IFS
+ # mkdir can fail with a 'File exist' error if two processes
# try to create one of the directories concurrently. Don't
# stop in that case!
- $MKDIR "$my_dir" 2>/dev/null || :
+ $MKDIR "$_G_dir" 2>/dev/null || :
done
- IFS="$save_mkdir_p_IFS"
+ IFS=$func_mkdir_p_IFS
# Bail out if we (or some other process) failed to create a directory.
- test -d "$my_directory_path" || \
- func_fatal_error "Failed to create \`$1'"
+ test -d "$_G_directory_path" || \
+ func_fatal_error "Failed to create '$1'"
fi
}
-# func_mktempdir [string]
+# func_mktempdir [BASENAME]
+# -------------------------
# Make a temporary directory that won't clash with other running
# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
+# given, BASENAME is the basename for that directory.
func_mktempdir ()
{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
+ $debug_cmd
+
+ _G_template=${TMPDIR-/tmp}/${1-$progname}
- if test "$opt_dry_run" = ":"; then
+ if test : = "$opt_dry_run"; then
# Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
+ _G_tmpdir=$_G_template-$$
else
# If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+ _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
- if test ! -d "$my_tmpdir"; then
+ if test ! -d "$_G_tmpdir"; then
# Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
+ _G_tmpdir=$_G_template-${RANDOM-0}$$
+
+ func_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$_G_tmpdir"
+ umask $func_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$_G_tmpdir" || \
+ func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+ fi
+
+ $ECHO "$_G_tmpdir"
+}
+
+
+# func_normal_abspath PATH
+# ------------------------
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+func_normal_abspath ()
+{
+ $debug_cmd
+
+ # These SED scripts presuppose an absolute path with a trailing slash.
+ _G_pathcar='s|^/\([^/]*\).*$|\1|'
+ _G_pathcdr='s|^/[^/]*||'
+ _G_removedotparts=':dotsl
+ s|/\./|/|g
+ t dotsl
+ s|/\.$|/|'
+ _G_collapseslashes='s|/\{1,\}|/|g'
+ _G_finalslash='s|/*$|/|'
+
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test / = "$func_normal_abspath_tpath"; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result"; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
+{
+ $debug_cmd
+
+ $opt_quiet || func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
+{
+ $debug_cmd
+
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=$func_dirname_result
+ if test -z "$func_relative_path_tlibdir"; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test -n "$func_stripname_result"; then
+ func_append func_relative_path_result "/$func_stripname_result"
+ fi
+
+ # Normalisation. If bindir is libdir, return '.' else relative path.
+ if test -n "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ fi
+
+ test -n "$func_relative_path_result" || func_relative_path_result=.
+
+ :
+}
+
+
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+# i) func_quote_for_eval_result
+# double-quoted, suitable for a subsequent eval
+# ii) func_quote_for_eval_unquoted_result
+# has all characters that are still active within double
+# quotes backslashified.
+func_quote_for_eval ()
+{
+ $debug_cmd
+
+ func_quote_for_eval_unquoted_result=
+ func_quote_for_eval_result=
+ while test 0 -lt $#; do
+ case $1 in
+ *[\\\`\"\$]*)
+ _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+ *)
+ _G_unquoted_arg=$1 ;;
+ esac
+ if test -n "$func_quote_for_eval_unquoted_result"; then
+ func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+ else
+ func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+ fi
+
+ case $_G_unquoted_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and variable expansion
+ # for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ _G_quoted_arg=\"$_G_unquoted_arg\"
+ ;;
+ *)
+ _G_quoted_arg=$_G_unquoted_arg
+ ;;
+ esac
+
+ if test -n "$func_quote_for_eval_result"; then
+ func_append func_quote_for_eval_result " $_G_quoted_arg"
+ else
+ func_append func_quote_for_eval_result "$_G_quoted_arg"
+ fi
+ shift
+ done
+}
+
+
+# func_quote_for_expand ARG
+# -------------------------
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ $debug_cmd
+
+ case $1 in
+ *[\\\`\"]*)
+ _G_arg=`$ECHO "$1" | $SED \
+ -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ _G_arg=$1 ;;
+ esac
+
+ case $_G_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ _G_arg=\"$_G_arg\"
+ ;;
+ esac
+
+ func_quote_for_expand_result=$_G_arg
+}
+
+
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_stripname ()
+ {
+ $debug_cmd
+
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary variable first.
+ func_stripname_result=$3
+ func_stripname_result=${func_stripname_result#"$1"}
+ func_stripname_result=${func_stripname_result%"$2"}
+ }'
+else
+ func_stripname ()
+ {
+ $debug_cmd
+
+ case $2 in
+ .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+ *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+ esac
+ }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ $debug_cmd
+
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ func_quote_for_expand "$_G_cmd"
+ eval "func_notquiet $func_quote_for_expand_result"
+
+ $opt_dry_run || {
+ eval "$_G_cmd"
+ _G_status=$?
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
+ fi
+ }
+}
+
+
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ $debug_cmd
+
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ $opt_quiet || {
+ func_quote_for_expand "$_G_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ $opt_dry_run || {
+ eval "$_G_user_locale
+ $_G_cmd"
+ _G_status=$?
+ eval "$_G_safe_locale"
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
+ fi
+ }
+}
+
+
+# func_tr_sh
+# ----------
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ $debug_cmd
+
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
+
+
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $debug_cmd
+
+ $opt_verbose && func_echo "$*"
+
+ :
+}
+
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
+}
+
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+ $debug_cmd
+
+ # CATEGORY must be in the warning_categories list!
+ case " $warning_categories " in
+ *" $1 "*) ;;
+ *) func_internal_error "invalid warning category '$1'" ;;
+ esac
+
+ _G_category=$1
+ shift
+
+ case " $opt_warning_types " in
+ *" $_G_category "*) $warning_func ${1+"$@"} ;;
+ esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+ $debug_cmd
+
+ printf '%s\n%s\n' "$1" "$2" \
+ | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false. Use it like this:
+#
+# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+ $debug_cmd
+
+ test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2014-01-07.03; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see .
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+# #!/bin/sh
+# . relative/path/to/funclib.sh
+# . relative/path/to/options-parser
+# scriptversion=1.0
+# func_options ${1+"$@"}
+# eval set dummy "$func_options_result"; shift
+# ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'. Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+ --debug enable verbose shell tracing
+ -W, --warnings=CATEGORY
+ report the warnings falling in CATEGORY [all]
+ -v, --verbose verbosely report processing
+ --version print version information and exit
+ -h, --help print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+ 'all' show all warnings
+ 'none' turn off all the warnings
+ 'error' warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code. A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+ $debug_cmd
+
+ func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not accept hook functions." ;;
+ esac
+
+ eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+ $debug_cmd
+
+ eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+ esac
+
+ eval _G_hook_fns=\$$1_hooks; shift
+
+ for _G_hook in $_G_hook_fns; do
+ eval $_G_hook '"$@"'
+
+ # store returned options list back into positional
+ # parameters for next 'cmd' execution.
+ eval _G_hook_result=\$${_G_hook}_result
+ eval set dummy "$_G_hook_result"; shift
+ done
+
+ func_quote_for_eval ${1+"$@"}
+ func_run_hooks_result=$func_quote_for_eval_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, remove any
+# options that you action, and then pass back the remaining unprocessed
+# options in '_result', escaped suitably for
+# 'eval'. Like this:
+#
+# my_options_prep ()
+# {
+# $debug_cmd
+#
+# # Extend the existing usage message.
+# usage_message=$usage_message'
+# -s, --silent don'\''t print informational messages
+# '
+#
+# func_quote_for_eval ${1+"$@"}
+# my_options_prep_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_options_prep my_options_prep
+#
+#
+# my_silent_option ()
+# {
+# $debug_cmd
+#
+# # Note that for efficiency, we parse as many options as we can
+# # recognise in a loop before passing the remainder back to the
+# # caller on the first unrecognised argument we encounter.
+# while test $# -gt 0; do
+# opt=$1; shift
+# case $opt in
+# --silent|-s) opt_silent=: ;;
+# # Separate non-argument short options:
+# -s*) func_split_short_opt "$_G_opt"
+# set dummy "$func_split_short_opt_name" \
+# "-$func_split_short_opt_arg" ${1+"$@"}
+# shift
+# ;;
+# *) set dummy "$_G_opt" "$*"; shift; break ;;
+# esac
+# done
+#
+# func_quote_for_eval ${1+"$@"}
+# my_silent_option_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_parse_options my_silent_option
+#
+#
+# my_option_validation ()
+# {
+# $debug_cmd
+#
+# $opt_silent && $opt_verbose && func_fatal_help "\
+# '--silent' and '--verbose' options are mutually exclusive."
+#
+# func_quote_for_eval ${1+"$@"}
+# my_option_validation_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_validate_options my_option_validation
+#
+# You'll alse need to manually amend $usage_message to reflect the extra
+# options you parse. It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+ $debug_cmd
- save_mktempdir_umask=`umask`
- umask 0077
- $MKDIR "$my_tmpdir"
- umask $save_mktempdir_umask
- fi
+ func_options_prep ${1+"$@"}
+ eval func_parse_options \
+ ${func_options_prep_result+"$func_options_prep_result"}
+ eval func_validate_options \
+ ${func_parse_options_result+"$func_parse_options_result"}
- # If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || \
- func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
- fi
+ eval func_run_hooks func_options \
+ ${func_validate_options_result+"$func_validate_options_result"}
- $ECHO "$my_tmpdir"
+ # save modified positional parameters for caller
+ func_options_result=$func_run_hooks_result
}
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters. If a hook function modifies that list, and
+# needs to propogate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning.
+func_hookable func_options_prep
+func_options_prep ()
{
- case $1 in
- *[\\\`\"\$]*)
- func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
- *)
- func_quote_for_eval_unquoted_result="$1" ;;
- esac
+ $debug_cmd
- case $func_quote_for_eval_unquoted_result in
- # Double-quote args containing shell metacharacters to delay
- # word splitting, command substitution and and variable
- # expansion for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
- ;;
- *)
- func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
- esac
+ # Option defaults:
+ opt_verbose=false
+ opt_warning_types=
+
+ func_run_hooks func_options_prep ${1+"$@"}
+
+ # save modified positional parameters for caller
+ func_options_prep_result=$func_run_hooks_result
}
-# func_quote_for_expand arg
-# Aesthetically quote ARG to be evaled later; same as above,
-# but do not quote variable references.
-func_quote_for_expand ()
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
{
- case $1 in
- *[\\\`\"]*)
- my_arg=`$ECHO "$1" | $SED \
- -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
- *)
- my_arg="$1" ;;
- esac
+ $debug_cmd
- case $my_arg in
- # Double-quote args containing shell metacharacters to delay
- # word splitting and command substitution for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- my_arg="\"$my_arg\""
- ;;
- esac
+ func_parse_options_result=
- func_quote_for_expand_result="$my_arg"
-}
+ # this just eases exit handling
+ while test $# -gt 0; do
+ # Defer to hook functions for initial option parsing, so they
+ # get priority in the event of reusing an option name.
+ func_run_hooks func_parse_options ${1+"$@"}
+ # Adjust func_parse_options positional parameters to match
+ eval set dummy "$func_run_hooks_result"; shift
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.
-func_show_eval ()
-{
- my_cmd="$1"
- my_fail_exp="${2-:}"
+ # Break out of the loop if we already parsed every option.
+ test $# -gt 0 || break
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --debug|-x) debug_cmd='set -x'
+ func_echo "enabling shell trace mode"
+ $debug_cmd
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ set dummy --warnings none ${1+"$@"}
+ shift
+ ;;
- if ${opt_dry_run-false}; then :; else
- eval "$my_cmd"
- my_status=$?
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
- fi
+ --warnings|--warning|-W)
+ test $# = 0 && func_missing_arg $_G_opt && break
+ case " $warning_categories $1" in
+ *" $1 "*)
+ # trailing space prevents matching last $1 above
+ func_append_uniq opt_warning_types " $1"
+ ;;
+ *all)
+ opt_warning_types=$warning_categories
+ ;;
+ *none)
+ opt_warning_types=none
+ warning_func=:
+ ;;
+ *error)
+ opt_warning_types=$warning_categories
+ warning_func=func_fatal_error
+ ;;
+ *)
+ func_fatal_error \
+ "unsupported warning category: '$1'"
+ ;;
+ esac
+ shift
+ ;;
+
+ --verbose|-v) opt_verbose=: ;;
+ --version) func_version ;;
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+
+ # Separate optargs to long options (plugins may need this):
+ --*=*) func_split_equals "$_G_opt"
+ set dummy "$func_split_equals_lhs" \
+ "$func_split_equals_rhs" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate optargs to short options:
+ -W*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-v*|-x*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognised option: '$_G_opt'" ;;
+ *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ func_parse_options_result=$func_quote_for_eval_result
}
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it. Use the saved locale for evaluation.
-func_show_eval_locale ()
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
{
- my_cmd="$1"
- my_fail_exp="${2-:}"
+ $debug_cmd
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
+ # Display all warnings if -W was not given.
+ test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
- if ${opt_dry_run-false}; then :; else
- eval "$lt_user_locale
- $my_cmd"
- my_status=$?
- eval "$lt_safe_locale"
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
- fi
-}
+ func_run_hooks func_validate_options ${1+"$@"}
-# func_tr_sh
-# Turn $1 into a string suitable for a shell variable name.
-# Result is stored in $func_tr_sh_result. All characters
-# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
-# if $1 begins with a digit, a '_' is prepended as well.
-func_tr_sh ()
-{
- case $1 in
- [0-9]* | *[!a-zA-Z0-9_]*)
- func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
- ;;
- * )
- func_tr_sh_result=$1
- ;;
- esac
+ # Bail if the options were screwed!
+ $exit_cmd $EXIT_FAILURE
+
+ # save modified positional parameters for caller
+ func_validate_options_result=$func_run_hooks_result
}
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
-{
- $opt_debug
- $SED -n '/(C)/!b go
- :more
- /\./!{
- N
- s/\n# / /
- b more
- }
- :go
- /^# '$PROGRAM' (GNU /,/# warranty; / {
- s/^# //
- s/^# *$//
- s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
- p
- }' < "$progpath"
- exit $?
-}
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
{
- $opt_debug
+ $debug_cmd
- $SED -n '/^# Usage:/,/^# *.*--help/ {
- s/^# //
- s/^# *$//
- s/\$progname/'$progname'/
- p
- }' < "$progpath"
- echo
- $ECHO "run \`$progname --help | more' for full usage"
- exit $?
+ eval \$ECHO \""Usage: $usage"\"
+ eval \$ECHO \""$fatal_help"\"
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
}
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
func_help ()
{
- $opt_debug
+ $debug_cmd
- $SED -n '/^# Usage:/,/# Report bugs to/ {
- :print
- s/^# //
- s/^# *$//
- s*\$progname*'$progname'*
- s*\$host*'"$host"'*
- s*\$SHELL*'"$SHELL"'*
- s*\$LTCC*'"$LTCC"'*
- s*\$LTCFLAGS*'"$LTCFLAGS"'*
- s*\$LD*'"$LD"'*
- s/\$with_gnu_ld/'"$with_gnu_ld"'/
- s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
- s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
- p
- d
- }
- /^# .* home page:/b print
- /^# General help using/b print
- ' < "$progpath"
- ret=$?
- if test -z "$1"; then
- exit $ret
- fi
+ func_usage_message
+ $ECHO "$long_help_message"
+ exit 0
}
-# func_missing_arg argname
+
+# func_missing_arg ARGNAME
+# ------------------------
# Echo program name prefixed message to standard error and set global
# exit_cmd.
func_missing_arg ()
{
- $opt_debug
+ $debug_cmd
- func_error "missing argument for $1."
+ func_error "Missing argument for '$1'."
exit_cmd=exit
}
-# func_split_short_opt shortopt
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=${1%%=*}
+ func_split_equals_rhs=${1#*=}
+ test "x$func_split_equals_lhs" = "x$1" \
+ && func_split_equals_rhs=
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+ func_split_equals_rhs=
+ test "x$func_split_equals_lhs" = "x$1" \
+ || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+ }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
# Set func_split_short_opt_name and func_split_short_opt_arg shell
# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
+ func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+ }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
{
- my_sed_short_opt='1s/^\(..\).*$/\1/;q'
- my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+ $debug_cmd
- func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
- func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
+ func_usage_message
+ $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+ exit 0
+}
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
{
- my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
- my_sed_long_arg='1s/^--[^=]*=//'
+ $debug_cmd
- func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
- func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
+ eval \$ECHO \""Usage: $usage"\"
+ echo
+ $SED -n 's|^# ||
+ /^Written by/{
+ x;p;x
+ }
+ h
+ /^Written by/q' < "$progpath"
+ echo
+ eval \$ECHO \""$usage_message"\"
+}
-exit_cmd=:
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $debug_cmd
+ printf '%s\n' "$progname $scriptversion"
+ $SED -n '
+ /(C)/!b go
+ :more
+ /\./!{
+ N
+ s|\n# | |
+ b more
+ }
+ :go
+ /^# Written by /,/# warranty; / {
+ s|^# ||
+ s|^# *$||
+ s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+ p
+ }
+ /^# Written by / {
+ s|^# ||
+ p
+ }
+ /^warranty; /q' < "$progpath"
+ exit $?
+}
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
{
- eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
+ $debug_cmd
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
- func_quote_for_eval "${2}"
- eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
+ _G_message=$*
+
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
-# func_arith arithmetic-term...
-func_arith ()
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
{
- func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
+ $debug_cmd
+ $warning_func ${1+"$@"}
+}
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+ --config show all configuration variables
+ --debug enable verbose shell tracing
+ -n, --dry-run display commands without modifying any files
+ --features display basic configuration information and exit
+ --mode=MODE use operation mode MODE
+ --no-warnings equivalent to '-Wnone'
+ --preserve-dup-deps don't remove duplicate dependency libraries
+ --quiet, --silent don't print informational messages
+ --tag=TAG use configuration variables from tag TAG
+ -v, --verbose print more informational messages than default
+ --version print version information
+ -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all]
+ -h, --help, --help-all print short, long, or detailed help message
+"
-# func_lo2o object
-func_lo2o ()
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
{
- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
+ $debug_cmd
+ func_usage_message
+ $ECHO "$long_help_message
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
+MODE must be one of the following:
+
+ clean remove files from the build directory
+ compile compile a source file into a libtool object
+ execute automatically set library path, then run a program
+ finish complete the installation of libtool libraries
+ install install libraries or executables
+ link create a library or an executable
+ uninstall remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE. When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+ host-triplet: $host
+ shell: $SHELL
+ compiler: $LTCC
+ compiler flags: $LTCFLAGS
+ linker: $LD (gnu? $with_gnu_ld)
+ version: $progname (GNU libtool) 2.4.6
+ automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+ autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to .
+GNU libtool home page: .
+General help using GNU software: ."
+ exit 0
+}
+
+
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_lo2o ()
+ {
+ case $1 in
+ *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+ * ) func_lo2o_result=$1 ;;
+ esac
+ }'
+
+ # func_xform LIBOBJ-OR-SOURCE
+ # ---------------------------
+ # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+ # suffix to a '.lo' libtool-object suffix.
+ eval 'func_xform ()
+ {
+ func_xform_result=${1%.*}.lo
+ }'
+else
+ # ...otherwise fall back to using sed.
+ func_lo2o ()
+ {
+ func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+ }
+
+ func_xform ()
+ {
+ func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+ }
+fi
-# func_fatal_configuration arg...
+# func_fatal_configuration ARG...
+# -------------------------------
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
func_fatal_configuration ()
{
- func_error ${1+"$@"}
- func_error "See the $PACKAGE documentation for more information."
- func_fatal_error "Fatal configuration error."
+ func__fatal_error ${1+"$@"} \
+ "See the $PACKAGE documentation for more information." \
+ "Fatal configuration error."
}
# func_config
+# -----------
# Display the configuration for all the tags in this script.
func_config ()
{
re_begincf='^# ### BEGIN LIBTOOL'
re_endcf='^# ### END LIBTOOL'
# Default configuration.
$SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
@@ -910,366 +2144,405 @@ func_config ()
# Now print the configurations for the tags.
for tagname in $taglist; do
$SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
done
exit $?
}
+
# func_features
+# -------------
# Display the features supported by this script.
func_features ()
{
echo "host: $host"
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
echo "enable shared libraries"
else
echo "disable shared libraries"
fi
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
echo "enable static libraries"
else
echo "disable static libraries"
fi
exit $?
}
-# func_enable_tag tagname
+
+# func_enable_tag TAGNAME
+# -----------------------
# Verify that TAGNAME is valid, and either flag an error and exit, or
# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
# variable here.
func_enable_tag ()
{
- # Global variable:
- tagname="$1"
+ # Global variable:
+ tagname=$1
- re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
- re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
- sed_extractcf="/$re_begincf/,/$re_endcf/p"
-
- # Validate tagname.
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- func_fatal_error "invalid tag name: $tagname"
- ;;
- esac
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf=/$re_begincf/,/$re_endcf/p
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
- # Don't test for the "default" C tag, as we know it's
- # there but not specially marked.
- case $tagname in
- CC) ;;
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
*)
- if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
- taglist="$taglist $tagname"
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
- # Evaluate the configuration. Be careful to quote the path
- # and the sed script, to avoid splitting on whitespace, but
- # also don't use non-portable quotes within backquotes within
- # quotes we have to do it in 2 steps:
- extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
- eval "$extractedcf"
- else
- func_error "ignoring unknown tag $tagname"
- fi
- ;;
- esac
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
}
+
# func_check_version_match
+# ------------------------
# Ensure that we are using m4 macros, and libtool script from the same
# release of libtool.
func_check_version_match ()
{
- if test "$package_revision" != "$macro_revision"; then
- if test "$VERSION" != "$macro_version"; then
- if test -z "$macro_version"; then
- cat >&2 <<_LT_EOF
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from an older release.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
- else
- cat >&2 <<_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
- fi
- else
- cat >&2 <<_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
$progname: but the definition of this LT_INIT comes from revision $macro_revision.
$progname: You should recreate aclocal.m4 with macros from revision $package_revision
$progname: of $PACKAGE $VERSION and run autoconf again.
_LT_EOF
- fi
+ fi
- exit $EXIT_MISMATCH
- fi
+ exit $EXIT_MISMATCH
+ fi
}
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
- shift; set dummy --mode clean ${1+"$@"}; shift
- ;;
-compile|compil|compi|comp|com|co|c)
- shift; set dummy --mode compile ${1+"$@"}; shift
- ;;
-execute|execut|execu|exec|exe|ex|e)
- shift; set dummy --mode execute ${1+"$@"}; shift
- ;;
-finish|finis|fini|fin|fi|f)
- shift; set dummy --mode finish ${1+"$@"}; shift
- ;;
-install|instal|insta|inst|ins|in|i)
- shift; set dummy --mode install ${1+"$@"}; shift
- ;;
-link|lin|li|l)
- shift; set dummy --mode link ${1+"$@"}; shift
- ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
- shift; set dummy --mode uninstall ${1+"$@"}; shift
- ;;
-esac
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
+{
+ $debug_mode
+ # Option defaults:
+ opt_config=false
+ opt_dlopen=
+ opt_dry_run=false
+ opt_help=false
+ opt_mode=
+ opt_preserve_dup_deps=false
+ opt_quiet=false
+ nonopt=
+ preserve_args=
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
+ # Shorthand for --mode=foo, only valid as the first argument
+ case $1 in
+ clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+ compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+ execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+ finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+ link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+ esac
+ # Pass back the list of options.
+ func_quote_for_eval ${1+"$@"}
+ libtool_options_prep_result=$func_quote_for_eval_result
+}
+func_add_hook func_options_prep libtool_options_prep
-# Parse options once, thoroughly. This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
-{
- # this just eases exit handling
- while test $# -gt 0; do
- opt="$1"
- shift
- case $opt in
- --debug|-x) opt_debug='set -x'
- func_echo "enabling shell trace mode"
- $opt_debug
- ;;
- --dry-run|--dryrun|-n)
- opt_dry_run=:
- ;;
- --config)
- opt_config=:
-func_config
- ;;
- --dlopen|-dlopen)
- optarg="$1"
- opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
- shift
- ;;
- --preserve-dup-deps)
- opt_preserve_dup_deps=:
- ;;
- --features)
- opt_features=:
-func_features
- ;;
- --finish)
- opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
- ;;
- --help)
- opt_help=:
- ;;
- --help-all)
- opt_help_all=:
-opt_help=': help-all'
- ;;
- --mode)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_mode="$optarg"
-case $optarg in
- # Valid mode arguments:
- clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
- # Catch anything else as an error
- *) func_error "invalid argument for $opt"
- exit_cmd=exit
- break
- ;;
-esac
- shift
- ;;
- --no-silent|--no-quiet)
- opt_silent=false
-func_append preserve_args " $opt"
- ;;
- --no-warning|--no-warn)
- opt_warning=false
-func_append preserve_args " $opt"
- ;;
- --no-verbose)
- opt_verbose=false
-func_append preserve_args " $opt"
- ;;
- --silent|--quiet)
- opt_silent=:
-func_append preserve_args " $opt"
- opt_verbose=false
- ;;
- --verbose|-v)
- opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
- ;;
- --tag)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
- shift
- ;;
-
- -\?|-h) func_usage ;;
- --help) func_help ;;
- --version) func_version ;;
-
- # Separate optargs to long options:
- --*=*)
- func_split_long_opt "$opt"
- set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
- shift
- ;;
-
- # Separate non-argument short options:
- -\?*|-h*|-n*|-v*)
- func_split_short_opt "$opt"
- set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
- shift
- ;;
-
- --) break ;;
- -*) func_fatal_help "unrecognized option \`$opt'" ;;
- *) set dummy "$opt" ${1+"$@"}; shift; break ;;
- esac
- done
- # Validate options:
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
+{
+ $debug_cmd
- # save first non-option argument
- if test "$#" -gt 0; then
- nonopt="$opt"
- shift
- fi
+ # Perform our own loop to consume as many options as possible in
+ # each iteration.
+ while test $# -gt 0; do
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+
+ --config) func_config ;;
+
+ --dlopen|-dlopen)
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+ shift
+ ;;
+
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=: ;;
+
+ --features) func_features ;;
+
+ --finish) set dummy --mode finish ${1+"$@"}; shift ;;
+
+ --help) opt_help=: ;;
+
+ --help-all) opt_help=': help-all' ;;
+
+ --mode) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_mode=$1
+ case $1 in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $_G_opt"
+ exit_cmd=exit
+ break
+ ;;
+ esac
+ shift
+ ;;
+
+ --no-silent|--no-quiet)
+ opt_quiet=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ opt_warning=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-verbose)
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --silent|--quiet)
+ opt_quiet=:
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --tag) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_tag=$1
+ func_append preserve_args " $_G_opt $1"
+ func_enable_tag "$1"
+ shift
+ ;;
+
+ --verbose|-v) opt_quiet=false
+ opt_verbose=:
+ func_append preserve_args " $_G_opt"
+ ;;
- # preserve --debug
- test "$opt_debug" = : || func_append preserve_args " --debug"
+ # An option not handled by this hook function:
+ *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
- case $host in
- *cygwin* | *mingw* | *pw32* | *cegcc*)
- # don't eliminate duplications in $postdeps and $predeps
- opt_duplicate_compiler_generated_deps=:
- ;;
- *)
- opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
- ;;
- esac
- $opt_help || {
- # Sanity checks first:
- func_check_version_match
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ libtool_parse_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_parse_options libtool_parse_options
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- func_fatal_configuration "not configured to build any kind of library"
- fi
- # Darwin sucks
- eval std_shrext=\"$shrext_cmds\"
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
- func_error "unrecognized option \`-dlopen'"
- $ECHO "$help" 1>&2
- exit $EXIT_FAILURE
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+ # save first non-option argument
+ if test 0 -lt $#; then
+ nonopt=$1
+ shift
fi
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$progname --help --mode=$opt_mode' for more information."
- }
+ # preserve --debug
+ test : = "$debug_cmd" || func_append preserve_args " --debug"
+
+ case $host in
+ # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+ # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+ *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ test yes != "$build_libtool_libs" \
+ && test yes != "$build_old_libs" \
+ && func_fatal_configuration "not configured to build any kind of library"
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+ func_error "unrecognized option '-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help=$help
+ help="Try '$progname --help --mode=$opt_mode' for more information."
+ }
- # Bail if the options were screwed
- $exit_cmd $EXIT_FAILURE
+ # Pass back the unparsed argument list
+ func_quote_for_eval ${1+"$@"}
+ libtool_validate_options_result=$func_quote_for_eval_result
}
+func_add_hook func_validate_options libtool_validate_options
+
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
## ----------- ##
## Main. ##
## ----------- ##
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+ $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_lalib_p ()
{
test -f "$1" &&
- $SED -e 4q "$1" 2>/dev/null \
- | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+ $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function implements the same check as func_lalib_p without
# resorting to external programs. To this end, it redirects stdin and
# closes it afterwards, without saving the original file descriptor.
# As a safety measure, use it only where a negative result would be
-# fatal anyway. Works if `file' does not exist.
+# fatal anyway. Works if 'file' does not exist.
func_lalib_unsafe_p ()
{
lalib_p=no
if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
for lalib_p_l in 1 2 3 4
do
read lalib_p_line
- case "$lalib_p_line" in
+ case $lalib_p_line in
\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
esac
done
exec 0<&5 5<&-
fi
- test "$lalib_p" = yes
+ test yes = "$lalib_p"
}
# func_ltwrapper_script_p file
# True iff FILE is a libtool wrapper script
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_script_p ()
{
- func_lalib_p "$1"
+ test -f "$1" &&
+ $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_ltwrapper_executable_p file
# True iff FILE is a libtool wrapper executable
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_executable_p ()
{
@@ -1284,17 +2557,17 @@ func_ltwrapper_executable_p ()
# func_ltwrapper_scriptname file
# Assumes file is an ltwrapper_executable
# uses $file to determine the appropriate filename for a
# temporary ltwrapper_script.
func_ltwrapper_scriptname ()
{
func_dirname_and_basename "$1" "" "."
func_stripname '' '.exe' "$func_basename_result"
- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
}
# func_ltwrapper_p file
# True iff FILE is a libtool wrapper script or wrapper executable
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_ltwrapper_p ()
{
@@ -1303,36 +2576,39 @@ func_ltwrapper_p ()
# func_execute_cmds commands fail_cmd
# Execute tilde-delimited COMMANDS.
# If FAIL_CMD is given, eval that upon failure.
# FAIL_CMD may read-access the current command in variable CMD!
func_execute_cmds ()
{
- $opt_debug
+ $debug_cmd
+
save_ifs=$IFS; IFS='~'
for cmd in $1; do
- IFS=$save_ifs
+ IFS=$sp$nl
eval cmd=\"$cmd\"
+ IFS=$save_ifs
func_show_eval "$cmd" "${2-:}"
done
IFS=$save_ifs
}
# func_source file
# Source FILE, adding directory component if necessary.
# Note that it is not necessary on cygwin/mingw to append a dot to
# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)! Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
+# 'FILE.' does not work on cygwin managed mounts.
func_source ()
{
- $opt_debug
+ $debug_cmd
+
case $1 in
*/* | *\\*) . "$1" ;;
*) . "./$1" ;;
esac
}
# func_resolve_sysroot PATH
@@ -1349,37 +2625,38 @@ func_resolve_sysroot ()
esac
}
# func_replace_sysroot PATH
# If PATH begins with the sysroot, replace it with = and
# store the result into func_replace_sysroot_result.
func_replace_sysroot ()
{
- case "$lt_sysroot:$1" in
+ case $lt_sysroot:$1 in
?*:"$lt_sysroot"*)
func_stripname "$lt_sysroot" '' "$1"
- func_replace_sysroot_result="=$func_stripname_result"
+ func_replace_sysroot_result='='$func_stripname_result
;;
*)
# Including no sysroot.
func_replace_sysroot_result=$1
;;
esac
}
# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
- $opt_debug
+ $debug_cmd
+
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
func_append_quoted CC_quoted "$arg"
done
CC_expanded=`func_echo_all $CC`
CC_quoted_expanded=`func_echo_all $CC_quoted`
case $@ in
@@ -1388,17 +2665,17 @@ func_infer_tag ()
" $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
" $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
# Blanks at the start of $base_compile will cause this to fail
# if we don't check for them as well.
*)
for z in $available_tags; do
if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
# Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
func_append_quoted CC_quoted "$arg"
done
CC_expanded=`func_echo_all $CC`
CC_quoted_expanded=`func_echo_all $CC_quoted`
case "$@ " in
@@ -1413,61 +2690,61 @@ func_infer_tag ()
esac
fi
done
# If $tagname still isn't set, then no tagged configuration
# was found and let the user know that the "--tag" command
# line option must be used.
if test -z "$tagname"; then
func_echo "unable to infer tagged configuration"
- func_fatal_error "specify a tag with \`--tag'"
+ func_fatal_error "specify a tag with '--tag'"
# else
# func_verbose "using $tagname tagged configuration"
fi
;;
esac
fi
}
# func_write_libtool_object output_name pic_name nonpic_name
# Create a libtool object file (analogous to a ".la" file),
# but don't create it if we're doing a dry run.
func_write_libtool_object ()
{
- write_libobj=${1}
- if test "$build_libtool_libs" = yes; then
- write_lobj=\'${2}\'
+ write_libobj=$1
+ if test yes = "$build_libtool_libs"; then
+ write_lobj=\'$2\'
else
write_lobj=none
fi
- if test "$build_old_libs" = yes; then
- write_oldobj=\'${3}\'
+ if test yes = "$build_old_libs"; then
+ write_oldobj=\'$3\'
else
write_oldobj=none
fi
$opt_dry_run || {
cat >${write_libobj}T </dev/null`
- if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
- $SED -e "$lt_sed_naive_backslashify"`
+ $SED -e "$sed_naive_backslashify"`
else
func_convert_core_file_wine_to_w32_result=
fi
fi
}
# end: func_convert_core_file_wine_to_w32
@@ -1509,28 +2787,29 @@ func_convert_core_file_wine_to_w32 ()
# $PATH. Assumes ARG has no leading or trailing path separator characters.
#
# ARG is path to be converted from $build format to win32.
# Result is available in $func_convert_core_path_wine_to_w32_result.
# Unconvertible file (directory) names in ARG are skipped; if no directory names
# are convertible, then the result may be empty.
func_convert_core_path_wine_to_w32 ()
{
- $opt_debug
+ $debug_cmd
+
# unfortunately, winepath doesn't convert paths, only file names
- func_convert_core_path_wine_to_w32_result=""
+ func_convert_core_path_wine_to_w32_result=
if test -n "$1"; then
oldIFS=$IFS
IFS=:
for func_convert_core_path_wine_to_w32_f in $1; do
IFS=$oldIFS
func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
- if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -n "$func_convert_core_file_wine_to_w32_result"; then
if test -z "$func_convert_core_path_wine_to_w32_result"; then
- func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
else
func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
fi
fi
done
IFS=$oldIFS
fi
}
@@ -1549,132 +2828,139 @@ func_convert_core_path_wine_to_w32 ()
#
# ARGS are passed to cygpath, with the last one being the file name or path to
# be converted.
#
# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
# environment variable; do not put it in $PATH.
func_cygpath ()
{
- $opt_debug
+ $debug_cmd
+
if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
if test "$?" -ne 0; then
# on failure, ensure result is empty
func_cygpath_result=
fi
else
func_cygpath_result=
- func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
fi
}
#end: func_cygpath
# func_convert_core_msys_to_w32 ARG
# Convert file name or path ARG from MSYS format to w32 format. Return
# result in func_convert_core_msys_to_w32_result.
func_convert_core_msys_to_w32 ()
{
- $opt_debug
+ $debug_cmd
+
# awkward: cmd appends spaces to result
func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+ $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
}
#end: func_convert_core_msys_to_w32
# func_convert_file_check ARG1 ARG2
# Verify that ARG1 (a file name in $build format) was converted to $host
# format in ARG2. Otherwise, emit an error message, but continue (resetting
# func_to_host_file_result to ARG1).
func_convert_file_check ()
{
- $opt_debug
- if test -z "$2" && test -n "$1" ; then
+ $debug_cmd
+
+ if test -z "$2" && test -n "$1"; then
func_error "Could not determine host file name corresponding to"
- func_error " \`$1'"
+ func_error " '$1'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback:
- func_to_host_file_result="$1"
+ func_to_host_file_result=$1
fi
}
# end func_convert_file_check
# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
# Verify that FROM_PATH (a path in $build format) was converted to $host
# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
# func_to_host_file_result to a simplistic fallback value (see below).
func_convert_path_check ()
{
- $opt_debug
+ $debug_cmd
+
if test -z "$4" && test -n "$3"; then
func_error "Could not determine the host path corresponding to"
- func_error " \`$3'"
+ func_error " '$3'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback. This is a deliberately simplistic "conversion" and
# should not be "improved". See libtool.info.
if test "x$1" != "x$2"; then
lt_replace_pathsep_chars="s|$1|$2|g"
func_to_host_path_result=`echo "$3" |
$SED -e "$lt_replace_pathsep_chars"`
else
- func_to_host_path_result="$3"
+ func_to_host_path_result=$3
fi
fi
}
# end func_convert_path_check
# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
# and appending REPL if ORIG matches BACKPAT.
func_convert_path_front_back_pathsep ()
{
- $opt_debug
+ $debug_cmd
+
case $4 in
- $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ $1 ) func_to_host_path_result=$3$func_to_host_path_result
;;
esac
case $4 in
$2 ) func_append func_to_host_path_result "$3"
;;
esac
}
# end func_convert_path_front_back_pathsep
##################################################
# $build to $host FILE NAME CONVERSION FUNCTIONS #
##################################################
-# invoked via `$to_host_file_cmd ARG'
+# invoked via '$to_host_file_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# Result will be available in $func_to_host_file_result.
# func_to_host_file ARG
# Converts the file name ARG from $build format to $host format. Return result
# in func_to_host_file_result.
func_to_host_file ()
{
- $opt_debug
+ $debug_cmd
+
$to_host_file_cmd "$1"
}
# end func_to_host_file
# func_to_tool_file ARG LAZY
# converts the file name ARG from $build format to toolchain format. Return
# result in func_to_tool_file_result. If the conversion in use is listed
# in (the comma separated) LAZY, no conversion takes place.
func_to_tool_file ()
{
- $opt_debug
+ $debug_cmd
+
case ,$2, in
*,"$to_tool_file_cmd",*)
func_to_tool_file_result=$1
;;
*)
$to_tool_file_cmd "$1"
func_to_tool_file_result=$func_to_host_file_result
;;
@@ -1682,111 +2968,116 @@ func_to_tool_file ()
}
# end func_to_tool_file
# func_convert_file_noop ARG
# Copy ARG to func_to_host_file_result.
func_convert_file_noop ()
{
- func_to_host_file_result="$1"
+ func_to_host_file_result=$1
}
# end func_convert_file_noop
# func_convert_file_msys_to_w32 ARG
# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
# conversion to w32 is not available inside the cwrapper. Returns result in
# func_to_host_file_result.
func_convert_file_msys_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result=$func_convert_core_msys_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_msys_to_w32
# func_convert_file_cygwin_to_w32 ARG
# Convert file name ARG from Cygwin to w32 format. Returns result in
# func_to_host_file_result.
func_convert_file_cygwin_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
# because $build is cygwin, we call "the" cygpath in $PATH; no need to use
# LT_CYGPATH in this case.
func_to_host_file_result=`cygpath -m "$1"`
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_cygwin_to_w32
# func_convert_file_nix_to_w32 ARG
# Convert file name ARG from *nix to w32 format. Requires a wine environment
# and a working winepath. Returns result in func_to_host_file_result.
func_convert_file_nix_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_file_wine_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_nix_to_w32
# func_convert_file_msys_to_cygwin ARG
# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
# Returns result in func_to_host_file_result.
func_convert_file_msys_to_cygwin ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
func_cygpath -u "$func_convert_core_msys_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
+ func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_msys_to_cygwin
# func_convert_file_nix_to_cygwin ARG
# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
# in func_to_host_file_result.
func_convert_file_nix_to_cygwin ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
# convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
func_convert_core_file_wine_to_w32 "$1"
func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
+ func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# end func_convert_file_nix_to_cygwin
#############################################
# $build to $host PATH CONVERSION FUNCTIONS #
#############################################
-# invoked via `$to_host_path_cmd ARG'
+# invoked via '$to_host_path_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# The result will be available in $func_to_host_path_result.
#
# Path separators are also converted from $build format to $host format. If
# ARG begins or ends with a path separator character, it is preserved (but
# converted to $host format) on output.
#
@@ -1800,76 +3091,80 @@ func_convert_file_nix_to_cygwin ()
# func_init_to_host_path_cmd
# Ensures that function "pointer" variable $to_host_path_cmd is set to the
# appropriate value, based on the value of $to_host_file_cmd.
to_host_path_cmd=
func_init_to_host_path_cmd ()
{
- $opt_debug
+ $debug_cmd
+
if test -z "$to_host_path_cmd"; then
func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
- to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ to_host_path_cmd=func_convert_path_$func_stripname_result
fi
}
# func_to_host_path ARG
# Converts the path ARG from $build format to $host format. Return result
# in func_to_host_path_result.
func_to_host_path ()
{
- $opt_debug
+ $debug_cmd
+
func_init_to_host_path_cmd
$to_host_path_cmd "$1"
}
# end func_to_host_path
# func_convert_path_noop ARG
# Copy ARG to func_to_host_path_result.
func_convert_path_noop ()
{
- func_to_host_path_result="$1"
+ func_to_host_path_result=$1
}
# end func_convert_path_noop
# func_convert_path_msys_to_w32 ARG
# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
# conversion to w32 is not available inside the cwrapper. Returns result in
# func_to_host_path_result.
func_convert_path_msys_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from ARG. MSYS
# behavior is inconsistent here; cygpath turns them into '.;' and ';.';
# and winepath ignores them completely.
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result=$func_convert_core_msys_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
fi
}
# end func_convert_path_msys_to_w32
# func_convert_path_cygwin_to_w32 ARG
# Convert path ARG from Cygwin to w32 format. Returns result in
# func_to_host_file_result.
func_convert_path_cygwin_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -1878,114 +3173,135 @@ func_convert_path_cygwin_to_w32 ()
# end func_convert_path_cygwin_to_w32
# func_convert_path_nix_to_w32 ARG
# Convert path ARG from *nix to w32 format. Requires a wine environment and
# a working winepath. Returns result in func_to_host_file_result.
func_convert_path_nix_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
fi
}
# end func_convert_path_nix_to_w32
# func_convert_path_msys_to_cygwin ARG
# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
# Returns result in func_to_host_file_result.
func_convert_path_msys_to_cygwin ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
+ func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
fi
}
# end func_convert_path_msys_to_cygwin
# func_convert_path_nix_to_cygwin ARG
# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
# func_to_host_file_result.
func_convert_path_nix_to_cygwin ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from
# ARG. msys behavior is inconsistent here, cygpath turns them
# into '.;' and ';.', and winepath ignores them completely.
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
+ func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
fi
}
# end func_convert_path_nix_to_cygwin
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+ $debug_cmd
+
+ func_dll_def_p_tmp=`$SED -n \
+ -e 's/^[ ]*//' \
+ -e '/^\(;.*\)*$/d' \
+ -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \
+ -e q \
+ "$1"`
+ test DEF = "$func_dll_def_p_tmp"
+}
+
+
# func_mode_compile arg...
func_mode_compile ()
{
- $opt_debug
+ $debug_cmd
+
# Get the compilation command and the source file.
base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ srcfile=$nonopt # always keep a non-empty value in "srcfile"
suppress_opt=yes
suppress_output=
arg_mode=normal
libobj=
later=
pie_flag=
for arg
do
case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
- lastarg="$arg"
+ lastarg=$arg
arg_mode=normal
;;
target )
- libobj="$arg"
+ libobj=$arg
arg_mode=normal
continue
;;
normal )
# Accept any command-line options.
case $arg in
-o)
test -n "$libobj" && \
- func_fatal_error "you cannot specify \`-o' more than once"
+ func_fatal_error "you cannot specify '-o' more than once"
arg_mode=target
continue
;;
-pie | -fpie | -fPIE)
func_append pie_flag " $arg"
continue
;;
@@ -2004,57 +3320,57 @@ func_mode_compile ()
arg_mode=arg # the next one goes into the "base_compile" arg list
continue # The current "srcfile" will either be retained or
;; # replaced later. I would guess that would be a bug.
-Wc,*)
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
lastarg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for arg in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_append_quoted lastarg "$arg"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$lastarg"
lastarg=$func_stripname_result
# Add the arguments to base_compile.
func_append base_compile " $lastarg"
continue
;;
*)
# Accept the current argument as the source file.
# The previous "srcfile" becomes the current argument.
#
- lastarg="$srcfile"
- srcfile="$arg"
+ lastarg=$srcfile
+ srcfile=$arg
;;
esac # case $arg
;;
esac # case $arg_mode
# Aesthetically quote the previous argument.
func_append_quoted base_compile "$lastarg"
done # for arg
case $arg_mode in
arg)
func_fatal_error "you must specify an argument for -Xcompile"
;;
target)
- func_fatal_error "you must specify a target with \`-o'"
+ func_fatal_error "you must specify a target with '-o'"
;;
*)
# Get the name of the library object.
test -z "$libobj" && {
func_basename "$srcfile"
- libobj="$func_basename_result"
+ libobj=$func_basename_result
}
;;
esac
# Recognize several different file suffixes.
# If the user specifies -o file.o, it is replaced with file.lo
case $libobj in
*.[cCFSifmso] | \
@@ -2064,27 +3380,27 @@ func_mode_compile ()
func_xform "$libobj"
libobj=$func_xform_result
;;
esac
case $libobj in
*.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
*)
- func_fatal_error "cannot determine name of library object from \`$libobj'"
+ func_fatal_error "cannot determine name of library object from '$libobj'"
;;
esac
func_infer_tag $base_compile
for arg in $later; do
case $arg in
-shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
+ test yes = "$build_libtool_libs" \
+ || func_fatal_configuration "cannot build a shared library"
build_old_libs=no
continue
;;
-static)
build_libtool_libs=no
build_old_libs=yes
continue
@@ -2100,70 +3416,70 @@ func_mode_compile ()
continue
;;
esac
done
func_quote_for_eval "$libobj"
test "X$libobj" != "X$func_quote_for_eval_result" \
&& $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ && func_warning "libobj name '$libobj' may not contain shell special characters."
func_dirname_and_basename "$obj" "/" ""
- objname="$func_basename_result"
- xdir="$func_dirname_result"
- lobj=${xdir}$objdir/$objname
+ objname=$func_basename_result
+ xdir=$func_dirname_result
+ lobj=$xdir$objdir/$objname
test -z "$base_compile" && \
func_fatal_help "you must specify a compilation command"
# Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
removelist="$obj $lobj $libobj ${libobj}T"
else
removelist="$lobj $libobj ${libobj}T"
fi
# On Cygwin there's no "real" PIC flag so we must build both object types
case $host_os in
cygwin* | mingw* | pw32* | os2* | cegcc*)
pic_mode=default
;;
esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
# non-PIC code in shared libraries is not supported
pic_mode=default
fi
# Calculate the filename of the output object if compiler does
# not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
+ if test no = "$compiler_c_o"; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+ lockfile=$output_obj.lock
else
output_obj=
need_locks=no
lockfile=
fi
# Lock this critical section if it is needed
# We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
+ if test yes = "$need_locks"; then
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
sleep 2
done
- elif test "$need_locks" = warn; then
+ elif test warn = "$need_locks"; then
if test -f "$lockfile"; then
$ECHO "\
*** ERROR, $lockfile exists and contains:
`cat $lockfile 2>/dev/null`
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
func_append removelist " $output_obj"
@@ -2175,98 +3491,98 @@ compiler."
trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
srcfile=$func_to_tool_file_result
func_quote_for_eval "$srcfile"
qsrcfile=$func_quote_for_eval_result
# Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
# Without this assignment, base_compile gets emptied.
fbsd_hideous_sh_bug=$base_compile
- if test "$pic_mode" != no; then
+ if test no != "$pic_mode"; then
command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
command="$base_compile $qsrcfile"
fi
func_mkdir_p "$xdir$objdir"
if test -z "$output_obj"; then
# Place PIC objects in $objdir
func_append command " -o $lobj"
fi
func_show_eval_locale "$command" \
'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
- if test "$need_locks" = warn &&
+ if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
but it should contain:
$srcfile
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
# Just move the object if needed, then go on to compile the next one
if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
func_show_eval '$MV "$output_obj" "$lobj"' \
'error=$?; $opt_dry_run || $RM $removelist; exit $error'
fi
# Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
+ if test yes = "$suppress_opt"; then
suppress_output=' >/dev/null 2>&1'
fi
fi
# Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
+ if test yes = "$build_old_libs"; then
+ if test yes != "$pic_mode"; then
# Don't build PIC code
command="$base_compile $qsrcfile$pie_flag"
else
command="$base_compile $qsrcfile $pic_flag"
fi
- if test "$compiler_c_o" = yes; then
+ if test yes = "$compiler_c_o"; then
func_append command " -o $obj"
fi
# Suppress compiler output if we already did a PIC compilation.
func_append command "$suppress_output"
func_show_eval_locale "$command" \
'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
- if test "$need_locks" = warn &&
+ if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`
but it should contain:
$srcfile
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
@@ -2276,27 +3592,27 @@ compiler."
'error=$?; $opt_dry_run || $RM $removelist; exit $error'
fi
fi
$opt_dry_run || {
func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
# Unlock the critical section if it was locked
- if test "$need_locks" != no; then
+ if test no != "$need_locks"; then
removelist=$lockfile
$RM "$lockfile"
fi
}
exit $EXIT_SUCCESS
}
$opt_help || {
- test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+ test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
}
func_mode_help ()
{
# We need to display help for each of the modes.
case $opt_mode in
"")
# Generic help is extracted from the usage comments
@@ -2306,17 +3622,17 @@ func_mode_help ()
clean)
$ECHO \
"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
Remove files from the build directory.
RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, object or program, all the files associated
with it are deleted. Otherwise, only FILE itself is deleted using RM."
;;
compile)
$ECHO \
@@ -2325,39 +3641,39 @@ with it are deleted. Otherwise, only FIL
Compile a source file into a libtool library object.
This mode accepts the following additional options:
-o OUTPUT-FILE set the output file name to OUTPUT-FILE
-no-suppress do not suppress compiler output for multiple passes
-prefer-pic try to build PIC objects only
-prefer-non-pic try to build non-PIC objects only
- -shared do not build a \`.o' file suitable for static linking
- -static only build a \`.o' file suitable for static linking
+ -shared do not build a '.o' file suitable for static linking
+ -static only build a '.o' file suitable for static linking
-Wc,FLAG pass FLAG directly to the compiler
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
from the given SOURCEFILE.
The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
;;
execute)
$ECHO \
"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
Automatically set library path, then run a program.
This mode accepts the following additional options:
-dlopen FILE add the directory containing FILE to the library path
-This mode sets the library path environment variable according to \`-dlopen'
+This mode sets the library path environment variable according to '-dlopen'
flags.
If any of the ARGS are libtool executable wrappers, then they are translated
into their corresponding uninstalled binary, and any of their required library
directories are added to the library path.
Then, COMMAND is executed, with ARGS as arguments."
;;
@@ -2366,27 +3682,27 @@ Then, COMMAND is executed, with ARGS as
$ECHO \
"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
Complete the installation of libtool libraries.
Each LIBDIR is a directory that contains libtool libraries.
The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
+the '--dry-run' option if you just want to see what would be executed."
;;
install)
$ECHO \
"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
Install executables or libraries.
INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
+either the 'install' or 'cp' program.
The following components of INSTALL-COMMAND are treated specially:
-inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
The rest of the components are interpreted as arguments to that command (only
BSD-compatible install options are recognized)."
;;
@@ -2402,31 +3718,32 @@ LINK-COMMAND is a command using the C co
a program from several object files.
The following components of LINK-COMMAND are treated specially:
-all-static do not do any dynamic linking at all
-avoid-version do not add a version suffix if possible
-bindir BINDIR specify path to binaries directory (for systems where
libraries must be found in the PATH setting at runtime)
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
try to export only the symbols listed in SYMFILE
-export-symbols-regex REGEX
try to export only the symbols matching REGEX
-LLIBDIR search LIBDIR for required installed libraries
-lNAME OUTPUT-FILE requires the installed library libNAME
-module build a library that can dlopened
-no-fast-install disable the fast-install mode
-no-install link a not-installable executable
-no-undefined declare that a library does not refer to external symbols
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
+ -objectlist FILE use a list of object files found in FILE to specify objects
+ -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes)
-precious-files-regex REGEX
don't remove output files matching REGEX
-release RELEASE specify package release information
-rpath LIBDIR the created library will eventually be installed in LIBDIR
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
-shared only do dynamic linking of libtool libraries
-shrext SUFFIX override the standard shared library file extension
-static do not do any dynamic linking of uninstalled libtool libraries
@@ -2436,263 +3753,265 @@ The following components of LINK-COMMAND
specify library version info [each variable defaults to 0]
-weak LIBNAME declare that the target provides the LIBNAME interface
-Wc,FLAG
-Xcompiler FLAG pass linker-specific FLAG directly to the compiler
-Wl,FLAG
-Xlinker FLAG pass linker-specific FLAG directly to the linker
-XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
-All other options (arguments beginning with \`-') are ignored.
+All other options (arguments beginning with '-') are ignored.
-Every other argument is treated as a filename. Files ending in \`.la' are
+Every other argument is treated as a filename. Files ending in '.la' are
treated as uninstalled libtool libraries, other files are standard or library
object files.
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
required, except when creating a convenience library.
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
is created, otherwise an executable program is created."
;;
uninstall)
$ECHO \
"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
Remove libraries from an installation directory.
RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, all the files associated with it are deleted.
Otherwise, only FILE itself is deleted using RM."
;;
*)
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode '$opt_mode'"
;;
esac
echo
- $ECHO "Try \`$progname --help' for more information about other modes."
+ $ECHO "Try '$progname --help' for more information about other modes."
}
# Now that we've collected a possible --mode arg, show help if necessary
if $opt_help; then
- if test "$opt_help" = :; then
+ if test : = "$opt_help"; then
func_mode_help
else
{
func_help noexit
for opt_mode in compile link execute install finish uninstall clean; do
func_mode_help
done
- } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ } | $SED -n '1p; 2,$s/^Usage:/ or: /p'
{
func_help noexit
for opt_mode in compile link execute install finish uninstall clean; do
echo
func_mode_help
done
} |
- sed '1d
+ $SED '1d
/^When reporting/,/^Report/{
H
d
}
$x
/information about other modes/d
/more detailed .*MODE/d
s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
fi
exit $?
fi
# func_mode_execute arg...
func_mode_execute ()
{
- $opt_debug
+ $debug_cmd
+
# The first argument is the command name.
- cmd="$nonopt"
+ cmd=$nonopt
test -z "$cmd" && \
func_fatal_help "you must specify a COMMAND"
# Handle -dlopen flags immediately.
for file in $opt_dlopen; do
test -f "$file" \
- || func_fatal_help "\`$file' is not a file"
+ || func_fatal_help "'$file' is not a file"
dir=
case $file in
*.la)
func_resolve_sysroot "$file"
file=$func_resolve_sysroot_result
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$lib' is not a valid libtool archive"
+ || func_fatal_help "'$lib' is not a valid libtool archive"
# Read the libtool library.
dlname=
library_names=
func_source "$file"
# Skip this library if it cannot be dlopened.
if test -z "$dlname"; then
# Warn if it was a shared library.
test -n "$library_names" && \
- func_warning "\`$file' was not linked with \`-export-dynamic'"
+ func_warning "'$file' was not linked with '-export-dynamic'"
continue
fi
func_dirname "$file" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
if test -f "$dir/$objdir/$dlname"; then
func_append dir "/$objdir"
else
if test ! -f "$dir/$dlname"; then
- func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
fi
fi
;;
*.lo)
# Just add the directory containing the .lo file.
func_dirname "$file" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
;;
*)
- func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
continue
;;
esac
# Get the absolute pathname.
absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
+ test -n "$absdir" && dir=$absdir
# Now add the directory to shlibpath_var.
if eval "test -z \"\$$shlibpath_var\""; then
eval "$shlibpath_var=\"\$dir\""
else
eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
fi
done
# This variable tells wrapper scripts just to set shlibpath_var
# rather than running their programs.
- libtool_execute_magic="$magic"
+ libtool_execute_magic=$magic
# Check if any of the arguments is a wrapper script.
args=
for file
do
case $file in
-* | *.la | *.lo ) ;;
*)
# Do a test to see if this is really a libtool program.
if func_ltwrapper_script_p "$file"; then
func_source "$file"
# Transform arg to wrapped name.
- file="$progdir/$program"
+ file=$progdir/$program
elif func_ltwrapper_executable_p "$file"; then
func_ltwrapper_scriptname "$file"
func_source "$func_ltwrapper_scriptname_result"
# Transform arg to wrapped name.
- file="$progdir/$program"
+ file=$progdir/$program
fi
;;
esac
# Quote arguments (to preserve shell metacharacters).
func_append_quoted args "$file"
done
- if test "X$opt_dry_run" = Xfalse; then
+ if $opt_dry_run; then
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ else
if test -n "$shlibpath_var"; then
# Export the shlibpath_var.
eval "export $shlibpath_var"
fi
# Restore saved environment variables
for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
eval "if test \"\${save_$lt_var+set}\" = set; then
$lt_var=\$save_$lt_var; export $lt_var
else
$lt_unset $lt_var
fi"
done
# Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
- echo "export $shlibpath_var"
- fi
- $ECHO "$cmd$args"
- exit $EXIT_SUCCESS
+ exec_cmd=\$cmd$args
fi
}
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
# func_mode_finish arg...
func_mode_finish ()
{
- $opt_debug
+ $debug_cmd
+
libs=
libdirs=
admincmds=
for opt in "$nonopt" ${1+"$@"}
do
if test -d "$opt"; then
func_append libdirs " $opt"
elif test -f "$opt"; then
if func_lalib_unsafe_p "$opt"; then
func_append libs " $opt"
else
- func_warning "\`$opt' is not a valid libtool archive"
+ func_warning "'$opt' is not a valid libtool archive"
fi
else
- func_fatal_error "invalid argument \`$opt'"
+ func_fatal_error "invalid argument '$opt'"
fi
done
if test -n "$libs"; then
if test -n "$lt_sysroot"; then
sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
else
sysroot_cmd=
fi
# Remove sysroot references
if $opt_dry_run; then
for lib in $libs; do
- echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ echo "removing references to $lt_sysroot and '=' prefixes from $lib"
done
else
tmpdir=`func_mktempdir`
for lib in $libs; do
- sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
> $tmpdir/tmp-la
mv -f $tmpdir/tmp-la $lib
done
${RM}r "$tmpdir"
fi
fi
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
@@ -2707,48 +4026,48 @@ func_mode_finish ()
eval cmds=\"$finish_eval\"
$opt_dry_run || eval "$cmds" || func_append admincmds "
$cmds"
fi
done
fi
# Exit here if they wanted silent mode.
- $opt_silent && exit $EXIT_SUCCESS
+ $opt_quiet && exit $EXIT_SUCCESS
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
echo "----------------------------------------------------------------------"
echo "Libraries have been installed in:"
for libdir in $libdirs; do
$ECHO " $libdir"
done
echo
echo "If you ever happen to want to link against installed libraries"
echo "in a given directory, LIBDIR, you must either use libtool, and"
- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "specify the full pathname of the library, or use the '-LLIBDIR'"
echo "flag during linking and do at least one of the following:"
if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " - add LIBDIR to the '$shlibpath_var' environment variable"
echo " during execution"
fi
if test -n "$runpath_var"; then
- echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " - add LIBDIR to the '$runpath_var' environment variable"
echo " during linking"
fi
if test -n "$hardcode_libdir_flag_spec"; then
libdir=LIBDIR
eval flag=\"$hardcode_libdir_flag_spec\"
- $ECHO " - use the \`$flag' linker flag"
+ $ECHO " - use the '$flag' linker flag"
fi
if test -n "$admincmds"; then
$ECHO " - have your system administrator run these commands:$admincmds"
fi
if test -f /etc/ld.so.conf; then
- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
fi
echo
echo "See any operating system documentation about shared libraries for"
case $host in
solaris2.[6789]|solaris2.1[0-9])
echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
echo "pages."
@@ -2757,28 +4076,30 @@ func_mode_finish ()
echo "more information, such as the ld(1) and ld.so(8) manual pages."
;;
esac
echo "----------------------------------------------------------------------"
fi
exit $EXIT_SUCCESS
}
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
# func_mode_install arg...
func_mode_install ()
{
- $opt_debug
+ $debug_cmd
+
# There may be an optional sh(1) argument at the beginning of
# install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
# Allow the use of GNU shtool's install command.
- case $nonopt in *shtool*) :;; *) false;; esac; then
+ case $nonopt in *shtool*) :;; *) false;; esac
+ then
# Aesthetically quote it.
func_quote_for_eval "$nonopt"
install_prog="$func_quote_for_eval_result "
arg=$1
shift
else
install_prog=
arg=$nonopt
@@ -2795,30 +4116,30 @@ func_mode_install ()
esac
# We need to accept at least all the BSD install flags.
dest=
files=
opts=
prev=
install_type=
- isdir=no
+ isdir=false
stripme=
no_mode=:
for arg
do
arg2=
if test -n "$dest"; then
func_append files " $dest"
dest=$arg
continue
fi
case $arg in
- -d) isdir=yes ;;
+ -d) isdir=: ;;
-f)
if $install_cp; then :; else
prev=$arg
fi
;;
-g | -m | -o)
prev=$arg
;;
@@ -2826,17 +4147,17 @@ func_mode_install ()
stripme=" -s"
continue
;;
-*)
;;
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
- if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ if test X-m = "X$prev" && test -n "$install_override_mode"; then
arg2=$install_override_mode
no_mode=false
fi
prev=
else
dest=$arg
continue
fi
@@ -2851,17 +4172,17 @@ func_mode_install ()
fi
func_append install_shared_prog " $func_quote_for_eval_result"
done
test -z "$install_prog" && \
func_fatal_help "you must specify an install program"
test -n "$prev" && \
- func_fatal_help "the \`$prev' option requires an argument"
+ func_fatal_help "the '$prev' option requires an argument"
if test -n "$install_override_mode" && $no_mode; then
if $install_cp; then :; else
func_quote_for_eval "$install_override_mode"
func_append install_shared_prog " -m $func_quote_for_eval_result"
fi
fi
@@ -2873,47 +4194,47 @@ func_mode_install ()
fi
fi
# Strip any trailing slash from the destination.
func_stripname '' '/' "$dest"
dest=$func_stripname_result
# Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
+ test -d "$dest" && isdir=:
+ if $isdir; then
+ destdir=$dest
destname=
else
func_dirname_and_basename "$dest" "" "."
- destdir="$func_dirname_result"
- destname="$func_basename_result"
+ destdir=$func_dirname_result
+ destname=$func_basename_result
# Not a directory, so check to see that there is only one file specified.
set dummy $files; shift
test "$#" -gt 1 && \
- func_fatal_help "\`$dest' is not a directory"
+ func_fatal_help "'$dest' is not a directory"
fi
case $destdir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
for file in $files; do
case $file in
*.lo) ;;
*)
- func_fatal_help "\`$destdir' must be an absolute directory name"
+ func_fatal_help "'$destdir' must be an absolute directory name"
;;
esac
done
;;
esac
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
- libtool_install_magic="$magic"
+ libtool_install_magic=$magic
staticlibs=
future_libdirs=
current_libdirs=
for file in $files; do
# Do each installation.
case $file in
@@ -2923,17 +4244,17 @@ func_mode_install ()
;;
*.la)
func_resolve_sysroot "$file"
file=$func_resolve_sysroot_result
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$file' is not a valid libtool archive"
+ || func_fatal_help "'$file' is not a valid libtool archive"
library_names=
old_library=
relink_command=
func_source "$file"
# Add the libdir to current_libdirs if it is the destination.
if test "X$destdir" = "X$libdir"; then
@@ -2945,158 +4266,165 @@ func_mode_install ()
# Note the libdir as a future libdir.
case "$future_libdirs " in
*" $libdir "*) ;;
*) func_append future_libdirs " $libdir" ;;
esac
fi
func_dirname "$file" "/" ""
- dir="$func_dirname_result"
+ dir=$func_dirname_result
func_append dir "$objdir"
if test -n "$relink_command"; then
# Determine the prefix the user has applied to our future dir.
inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
# Don't allow the user to place us outside of our expected
# location b/c this prevents finding dependent libraries that
# are installed to the same prefix.
# At present, this check doesn't affect windows .dll's that
# are installed into $libdir/../bin (currently, that works fine)
# but it's something to keep an eye on.
test "$inst_prefix_dir" = "$destdir" && \
- func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+ func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
else
relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
fi
- func_warning "relinking \`$file'"
+ func_warning "relinking '$file'"
func_show_eval "$relink_command" \
- 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
fi
# See the names of the shared library.
set dummy $library_names; shift
if test -n "$1"; then
- realname="$1"
+ realname=$1
shift
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
+ srcname=$realname
+ test -n "$relink_command" && srcname=${realname}T
# Install the shared library and build the symlinks.
func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
'exit $?'
- tstripme="$stripme"
+ tstripme=$stripme
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
case $realname in
*.dll.a)
- tstripme=""
+ tstripme=
+ ;;
+ esac
+ ;;
+ os2*)
+ case $realname in
+ *_dll.a)
+ tstripme=
;;
esac
;;
esac
if test -n "$tstripme" && test -n "$striplib"; then
func_show_eval "$striplib $destdir/$realname" 'exit $?'
fi
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
+ # Try 'ln -sf' first, because the 'ln' binary might depend on
# the symlink we replace! Solaris /bin/ln does not understand -f,
# so we also need to try rm && ln -s.
for linkname
do
test "$linkname" != "$realname" \
&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
done
fi
# Do each command in the postinstall commands.
- lib="$destdir/$realname"
+ lib=$destdir/$realname
func_execute_cmds "$postinstall_cmds" 'exit $?'
fi
# Install the pseudo-library for information purposes.
func_basename "$file"
- name="$func_basename_result"
- instname="$dir/$name"i
+ name=$func_basename_result
+ instname=$dir/${name}i
func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
# Maybe install the static library, too.
test -n "$old_library" && func_append staticlibs " $dir/$old_library"
;;
*.lo)
# Install (i.e. copy) a libtool object.
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
- destfile="$destdir/$destname"
+ destfile=$destdir/$destname
else
func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
fi
# Deduce the name of the destination old-style object file.
case $destfile in
*.lo)
func_lo2o "$destfile"
staticdest=$func_lo2o_result
;;
*.$objext)
- staticdest="$destfile"
+ staticdest=$destfile
destfile=
;;
*)
- func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ func_fatal_help "cannot copy a libtool object to '$destfile'"
;;
esac
# Install the libtool object if requested.
test -n "$destfile" && \
func_show_eval "$install_prog $file $destfile" 'exit $?'
# Install the old object if enabled.
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
# Deduce the name of the old-style object file.
func_lo2o "$file"
staticobj=$func_lo2o_result
func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
fi
exit $EXIT_SUCCESS
;;
*)
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
- destfile="$destdir/$destname"
+ destfile=$destdir/$destname
else
func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
fi
# If the file is missing, and there is a .exe on the end, strip it
# because it is most likely a libtool script we actually want to
# install
- stripped_ext=""
+ stripped_ext=
case $file in
*.exe)
if test ! -f "$file"; then
func_stripname '' '.exe' "$file"
file=$func_stripname_result
- stripped_ext=".exe"
+ stripped_ext=.exe
fi
;;
esac
# Do a test to see if this is really a libtool program.
case $host in
*cygwin* | *mingw*)
if func_ltwrapper_executable_p "$file"; then
@@ -3114,59 +4442,59 @@ func_mode_install ()
if func_ltwrapper_script_p "$wrapper"; then
notinst_deplibs=
relink_command=
func_source "$wrapper"
# Check the variables that should have been set.
test -z "$generated_by_libtool_version" && \
- func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+ func_fatal_error "invalid libtool wrapper script '$wrapper'"
- finalize=yes
+ finalize=:
for lib in $notinst_deplibs; do
# Check to see that each library is installed.
libdir=
if test -f "$lib"; then
func_source "$lib"
fi
- libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
if test -n "$libdir" && test ! -f "$libfile"; then
- func_warning "\`$lib' has not been installed in \`$libdir'"
- finalize=no
+ func_warning "'$lib' has not been installed in '$libdir'"
+ finalize=false
fi
done
relink_command=
func_source "$wrapper"
outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
+ if test no = "$fast_install" && test -n "$relink_command"; then
$opt_dry_run || {
- if test "$finalize" = yes; then
+ if $finalize; then
tmpdir=`func_mktempdir`
func_basename "$file$stripped_ext"
- file="$func_basename_result"
- outputname="$tmpdir/$file"
+ file=$func_basename_result
+ outputname=$tmpdir/$file
# Replace the output file specification.
relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
- $opt_silent || {
+ $opt_quiet || {
func_quote_for_expand "$relink_command"
eval "func_echo $func_quote_for_expand_result"
}
if eval "$relink_command"; then :
else
- func_error "error: relink \`$file' with the above command before installing it"
+ func_error "error: relink '$file' with the above command before installing it"
$opt_dry_run || ${RM}r "$tmpdir"
continue
fi
- file="$outputname"
+ file=$outputname
else
- func_warning "cannot relink \`$file'"
+ func_warning "cannot relink '$file'"
fi
}
else
# Install the binary that we compiled earlier.
file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
fi
fi
@@ -3193,117 +4521,120 @@ func_mode_install ()
${RM}r "$tmpdir"
fi
;;
esac
done
for file in $staticlibs; do
func_basename "$file"
- name="$func_basename_result"
+ name=$func_basename_result
# Set up the ranlib parameters.
- oldlib="$destdir/$name"
+ oldlib=$destdir/$name
func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
tool_oldlib=$func_to_tool_file_result
func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
if test -n "$stripme" && test -n "$old_striplib"; then
func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
fi
# Do each command in the postinstall commands.
func_execute_cmds "$old_postinstall_cmds" 'exit $?'
done
test -n "$future_libdirs" && \
- func_warning "remember to run \`$progname --finish$future_libdirs'"
+ func_warning "remember to run '$progname --finish$future_libdirs'"
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
$opt_dry_run && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
else
exit $EXIT_SUCCESS
fi
}
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
# func_generate_dlsyms outputname originator pic_p
# Extract symbols from dlprefiles and create ${outputname}S.o with
# a dlpreopen symbol table.
func_generate_dlsyms ()
{
- $opt_debug
- my_outputname="$1"
- my_originator="$2"
- my_pic_p="${3-no}"
- my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ $debug_cmd
+
+ my_outputname=$1
+ my_originator=$2
+ my_pic_p=${3-false}
+ my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
my_dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
if test -n "$NM" && test -n "$global_symbol_pipe"; then
- my_dlsyms="${my_outputname}S.c"
+ my_dlsyms=${my_outputname}S.c
else
func_error "not configured to extract global symbols from dlpreopened files"
fi
fi
if test -n "$my_dlsyms"; then
case $my_dlsyms in
"") ;;
*.c)
# Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${my_outputname}.nm"
+ nlist=$output_objdir/$my_outputname.nm
func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
# Parse the name list into a source file.
func_verbose "creating $output_objdir/$my_dlsyms"
$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
#ifdef __cplusplus
extern \"C\" {
#endif
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
#endif
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
# define LT_DLSYM_CONST const
#endif
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
/* External symbol declarations for the compiler. */\
"
- if test "$dlself" = yes; then
- func_verbose "generating symbol list for \`$output'"
+ if test yes = "$dlself"; then
+ func_verbose "generating symbol list for '$output'"
$opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
# Add our own program objects to the symbol list.
progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
for progfile in $progfiles; do
func_to_tool_file "$progfile" func_convert_file_msys_to_w32
- func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
$opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
done
if test -n "$exclude_expsyms"; then
$opt_dry_run || {
eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
}
@@ -3313,67 +4644,67 @@ extern \"C\" {
$opt_dry_run || {
eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
}
fi
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
+ export_symbols=$output_objdir/$outputname.exp
$opt_dry_run || {
$RM $export_symbols
- eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
case $host in
*cygwin* | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
;;
esac
}
else
$opt_dry_run || {
- eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
case $host in
*cygwin* | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
;;
esac
}
fi
fi
for dlprefile in $dlprefiles; do
- func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_verbose "extracting global C symbols from '$dlprefile'"
func_basename "$dlprefile"
- name="$func_basename_result"
+ name=$func_basename_result
case $host in
*cygwin* | *mingw* | *cegcc* )
# if an import library, we need to obtain dlname
if func_win32_import_lib_p "$dlprefile"; then
func_tr_sh "$dlprefile"
eval "curr_lafile=\$libfile_$func_tr_sh_result"
- dlprefile_dlbasename=""
+ dlprefile_dlbasename=
if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
# Use subshell, to avoid clobbering current variable values
dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
- if test -n "$dlprefile_dlname" ; then
+ if test -n "$dlprefile_dlname"; then
func_basename "$dlprefile_dlname"
- dlprefile_dlbasename="$func_basename_result"
+ dlprefile_dlbasename=$func_basename_result
else
# no lafile. user explicitly requested -dlpreopen .
$sharedlib_from_linklib_cmd "$dlprefile"
dlprefile_dlbasename=$sharedlib_from_linklib_result
fi
fi
$opt_dry_run || {
- if test -n "$dlprefile_dlbasename" ; then
+ if test -n "$dlprefile_dlbasename"; then
eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
else
func_warning "Could not compute DLL name from $name"
eval '$ECHO ": $name " >> "$nlist"'
fi
func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
$SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
@@ -3419,29 +4750,53 @@ extern \"C\" {
fi
if test -f "$nlist"S; then
eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
else
echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
fi
+ func_show_eval '$RM "${nlist}I"'
+ if test -n "$global_symbol_to_import"; then
+ eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+ fi
+
echo >> "$output_objdir/$my_dlsyms" "\
/* The mapping between symbol names and symbols. */
typedef struct {
const char *name;
void *address;
} lt_dlsymlist;
extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+ LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+ for (; symbol->name; ++symbol)
+ {"
+ $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+ echo >> "$output_objdir/$my_dlsyms" "\
+ }
+}"
+ fi
+ echo >> "$output_objdir/$my_dlsyms" "\
LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
- { \"$my_originator\", (void *) 0 },"
+{ {\"$my_originator\", (void *) 0},"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {\"@INIT@\", (void *) <_syminit},"
+ fi
case $need_lib_prefix in
no)
eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
;;
*)
eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
;;
@@ -3473,39 +4828,37 @@ static const void *lt_preloaded_setup()
# linked before any other PIC object. But we must not use
# pic_flag when linking with -static. The problem exists in
# FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
*-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
*-*-hpux*)
pic_flag_for_symtable=" $pic_flag" ;;
*)
- if test "X$my_pic_p" != Xno; then
- pic_flag_for_symtable=" $pic_flag"
- fi
+ $my_pic_p && pic_flag_for_symtable=" $pic_flag"
;;
esac
;;
esac
symtab_cflags=
for arg in $LTCFLAGS; do
case $arg in
-pie | -fpie | -fPIE) ;;
*) func_append symtab_cflags " $arg" ;;
esac
done
# Now compile the dynamic symbol file.
func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
# Clean up the generated files.
- func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
# Transform the symbol file into the correct name.
- symfileobj="$output_objdir/${my_outputname}S.$objext"
+ symfileobj=$output_objdir/${my_outputname}S.$objext
case $host in
*cygwin* | *mingw* | *cegcc* )
if test -f "$output_objdir/$my_outputname.def"; then
compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
else
compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
@@ -3513,60 +4866,100 @@ static const void *lt_preloaded_setup()
;;
*)
compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
;;
esac
;;
*)
- func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ func_fatal_error "unknown suffix for '$my_dlsyms'"
;;
esac
else
# We keep going just in case the user didn't refer to
# lt_preloaded_symbols. The linker will fail if global_symbol_pipe
# really was required.
# Nullify the symbol file.
compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
fi
}
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
# func_win32_libid arg
# return the library type of file 'arg'
#
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
# Despite the name, also deal with 64 bit binaries.
func_win32_libid ()
{
- $opt_debug
- win32_libid_type="unknown"
+ $debug_cmd
+
+ win32_libid_type=unknown
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
*ar\ archive\ import\ library*) # definitely import
win32_libid_type="x86 archive import"
;;
*ar\ archive*) # could be an import, or static
# Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
$EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
- $SED -n -e '
+ case $nm_interface in
+ "MS dumpbin")
+ if func_cygming_ms_implib_p "$1" ||
+ func_cygming_gnu_implib_p "$1"
+ then
+ win32_nmres=import
+ else
+ win32_nmres=
+ fi
+ ;;
+ *)
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
1,100{
/ I /{
- s,.*,import,
+ s|.*|import|
p
q
}
}'`
+ ;;
+ esac
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
esac
fi
;;
*DLL*)
win32_libid_type="x86 DLL"
@@ -3588,34 +4981,36 @@ func_win32_libid ()
# name of the DLL associated with the specified
# import library ARG.
# Invoked by eval'ing the libtool variable
# $sharedlib_from_linklib_cmd
# Result is available in the variable
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib ()
{
- $opt_debug
+ $debug_cmd
+
sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
}
# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
#
# The is the core of a fallback implementation of a
# platform-specific function to extract the name of the
# DLL associated with the specified import library LIBNAME.
#
# SECTION_NAME is either .idata$6 or .idata$7, depending
# on the platform and compiler that created the implib.
#
# Echos the name of the DLL associated with the
# specified import library.
func_cygming_dll_for_implib_fallback_core ()
{
- $opt_debug
+ $debug_cmd
+
match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
$OBJDUMP -s --section "$1" "$2" 2>/dev/null |
$SED '/^Contents of section '"$match_literal"':/{
# Place marker at beginning of archive member dllname section
s/.*/====MARK====/
p
d
}
@@ -3641,164 +5036,144 @@ func_cygming_dll_for_implib_fallback_cor
# Remove the marker
s/^====MARK====//
# Remove trailing dots and whitespace
s/[\. \t]*$//
# Print
/./p' |
# we now have a list, one entry per line, of the stringified
# contents of the appropriate section of all members of the
- # archive which possess that section. Heuristic: eliminate
- # all those which have a first or second character that is
+ # archive that possess that section. Heuristic: eliminate
+ # all those that have a first or second character that is
# a '.' (that is, objdump's representation of an unprintable
# character.) This should work for all archives with less than
# 0x302f exports -- but will fail for DLLs whose name actually
# begins with a literal '.' or a single character followed by
# a '.'.
#
# Of those that remain, print the first one.
$SED -e '/^\./d;/^.\./d;q'
}
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
- test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
- test -n "$func_cygming_ms_implib_tmp"
-}
-
# func_cygming_dll_for_implib_fallback ARG
# Platform-specific function to extract the
# name of the DLL associated with the specified
# import library ARG.
#
# This fallback implementation is for use when $DLLTOOL
# does not support the --identify-strict option.
# Invoked by eval'ing the libtool variable
# $sharedlib_from_linklib_cmd
# Result is available in the variable
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib_fallback ()
{
- $opt_debug
- if func_cygming_gnu_implib_p "$1" ; then
+ $debug_cmd
+
+ if func_cygming_gnu_implib_p "$1"; then
# binutils import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
- elif func_cygming_ms_implib_p "$1" ; then
+ elif func_cygming_ms_implib_p "$1"; then
# ms-generated import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
else
# unknown
- sharedlib_from_linklib_result=""
+ sharedlib_from_linklib_result=
fi
}
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
- $opt_debug
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
- if test "$lock_old_archive_extraction" = yes; then
+ $debug_cmd
+
+ f_ex_an_ar_dir=$1; shift
+ f_ex_an_ar_oldlib=$1
+ if test yes = "$lock_old_archive_extraction"; then
lockfile=$f_ex_an_ar_oldlib.lock
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
sleep 2
done
fi
func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
'stat=$?; rm -f "$lockfile"; exit $stat'
- if test "$lock_old_archive_extraction" = yes; then
+ if test yes = "$lock_old_archive_extraction"; then
$opt_dry_run || rm -f "$lockfile"
fi
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
:
else
func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
fi
}
# func_extract_archives gentop oldlib ...
func_extract_archives ()
{
- $opt_debug
- my_gentop="$1"; shift
+ $debug_cmd
+
+ my_gentop=$1; shift
my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
+ my_oldobjs=
+ my_xlib=
+ my_xabs=
+ my_xdir=
for my_xlib in $my_oldlibs; do
# Extract the objects.
case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
func_basename "$my_xlib"
- my_xlib="$func_basename_result"
+ my_xlib=$func_basename_result
my_xlib_u=$my_xlib
while :; do
case " $extracted_archives " in
*" $my_xlib_u "*)
func_arith $extracted_serial + 1
extracted_serial=$func_arith_result
my_xlib_u=lt$extracted_serial-$my_xlib ;;
*) break ;;
esac
done
extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
+ my_xdir=$my_gentop/$my_xlib_u
func_mkdir_p "$my_xdir"
case $host in
*-darwin*)
func_verbose "Extracting $my_xabs"
# Do not bother doing anything if just a dry run
$opt_dry_run || {
darwin_orig_dir=`pwd`
cd $my_xdir || exit $?
darwin_archive=$my_xabs
darwin_curdir=`pwd`
- darwin_base_archive=`basename "$darwin_archive"`
+ func_basename "$darwin_archive"
+ darwin_base_archive=$func_basename_result
darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
if test -n "$darwin_arches"; then
darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
darwin_arch=
func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ for darwin_arch in $darwin_arches; do
+ func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+ $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+ cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+ func_extract_an_archive "`pwd`" "$darwin_base_archive"
cd "$darwin_curdir"
- $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
done # $darwin_arches
## Okay now we've a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
$LIPO -create -output "$darwin_file" $darwin_files
done # $darwin_filelist
$RM -rf unfat-$$
cd "$darwin_orig_dir"
@@ -3810,43 +5185,43 @@ func_extract_archives ()
;;
*)
func_extract_an_archive "$my_xdir" "$my_xabs"
;;
esac
my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
done
- func_extract_archives_result="$my_oldobjs"
+ func_extract_archives_result=$my_oldobjs
}
# func_emit_wrapper [arg=no]
#
# Emit a libtool wrapper script on stdout.
# Don't directly open a file because we may want to
# incorporate the script contents within a cygwin/mingw
# wrapper executable. Must ONLY be called from within
# func_mode_link because it depends on a number of variables
# set therein.
#
# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
# variable will take. If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
+# will assume that the directory where it is stored is
# the $objdir directory. This is a cygwin/mingw-specific
# behavior.
func_emit_wrapper ()
{
func_emit_wrapper_arg1=${1-no}
$ECHO "\
#! $SHELL
# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
#
# This wrapper script should never be moved out of the build directory.
# If it is, it will not operate correctly.
# Sed substitution that helps us do robust quoting. It backslashifies
@@ -3893,19 +5268,19 @@ func_fallback_echo ()
\$1
_LTECHO_EOF'
}
ECHO=\"$qECHO\"
fi
# Very basic option parsing. These options are (a) specific to
# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
+# /script/ and the wrapper /executable/ that is used only on
# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
+# (application programs are unlikely to have options that match
# this pattern).
#
# There are only two supported options: --lt-debug and
# --lt-dump-script. There is, deliberately, no --lt-help.
#
# The first argument to this parsing function should be the
# script's $0 value, followed by "$@".
lt_option_debug=
@@ -3928,52 +5303,52 @@ func_parse_lt_options ()
\$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
exit 1
;;
esac
done
# Print the debug banner immediately:
if test -n \"\$lt_option_debug\"; then
- echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
fi
}
# Used when --lt-debug. Prints its arguments to stdout
# (redirection is the responsibility of the caller)
func_lt_dump_args ()
{
lt_dump_args_N=1;
for lt_arg
do
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
done
}
# Core function for launching the target application
func_exec_program_core ()
{
"
case $host in
# Backslashes separate directories on plain windows
*-*-mingw | *-*-os2* | *-cegcc*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
"
;;
*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir/\$program\" \${1+\"\$@\"}
"
;;
esac
$ECHO "\
\$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
@@ -4038,40 +5413,40 @@ func_exec_program ()
esac
fi
# Try to get the absolute directory name.
absdir=\`cd \"\$thisdir\" && pwd\`
test -n \"\$absdir\" && thisdir=\"\$absdir\"
"
- if test "$fast_install" = yes; then
+ if test yes = "$fast_install"; then
$ECHO "\
program=lt-'$outputname'$exeext
progdir=\"\$thisdir/$objdir\"
if test ! -f \"\$progdir/\$program\" ||
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
file=\"\$\$-\$program\"
if test ! -d \"\$progdir\"; then
$MKDIR \"\$progdir\"
else
$RM \"\$progdir/\$file\"
fi"
$ECHO "\
# relink executable if necessary
if test -n \"\$relink_command\"; then
if relink_command_output=\`eval \$relink_command 2>&1\`; then :
else
- $ECHO \"\$relink_command_output\" >&2
+ \$ECHO \"\$relink_command_output\" >&2
$RM \"\$progdir/\$file\"
exit 1
fi
fi
$MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
{ $RM \"\$progdir/\$program\";
$MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
@@ -4096,17 +5471,17 @@ func_exec_program ()
if test -n "$dllsearchpath"; then
$ECHO "\
# Add the dll search path components to the executable PATH
PATH=$dllsearchpath:\$PATH
"
fi
# Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
$ECHO "\
# Add our own library path to $shlibpath_var
$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
# Some systems cannot cope with colon-terminated $shlibpath_var
# The second colon is a workaround for a bug in BeOS R4 sed
$shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
@@ -4116,17 +5491,17 @@ func_exec_program ()
$ECHO "\
if test \"\$libtool_execute_magic\" != \"$magic\"; then
# Run the actual program with our arguments.
func_exec_program \${1+\"\$@\"}
fi
else
# The program doesn't exist.
- \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
\$ECHO \"This script is just a wrapper for \$program.\" 1>&2
\$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
exit 1
fi
fi\
"
}
@@ -4135,17 +5510,17 @@ fi\
# emit the source code for a wrapper executable on stdout
# Must ONLY be called from within func_mode_link because
# it depends on a number of variable set therein.
func_emit_cwrapperexe_src ()
{
cat <
#include
#include
#include
#include
#include
#include
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
+#if defined __MINGW32__
# ifdef __STRICT_ANSI__
int _putenv (const char *);
# endif
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
# ifdef __STRICT_ANSI__
char *realpath (const char *, char *);
int putenv (char *);
int setenv (const char *, const char *, int);
# endif
-/* #elif defined (other platforms) ... */
+/* #elif defined other_platform || defined ... */
#endif
/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
+#if defined _MSC_VER
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-# define _INTPTR_T_DEFINED
-# define intptr_t int
-# endif
-#elif defined(__MINGW32__)
+#elif defined __MINGW32__
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
# define HAVE_SETENV
# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
+/* #elif defined other platforms ... */
#endif
-#if defined(PATH_MAX)
+#if defined PATH_MAX
# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
+#elif defined MAXPATHLEN
# define LT_PATHMAX MAXPATHLEN
#else
# define LT_PATHMAX 1024
#endif
#ifndef S_IXOTH
# define S_IXOTH 0
#endif
@@ -4229,18 +5602,18 @@ int setenv (const char *, const char *,
#endif
/* path handling portability macros */
#ifndef DIR_SEPARATOR
# define DIR_SEPARATOR '/'
# define PATH_SEPARATOR ':'
#endif
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+ defined __OS2__
# define HAVE_DOS_BASED_FILE_SYSTEM
# define FOPEN_WB "wb"
# ifndef DIR_SEPARATOR_2
# define DIR_SEPARATOR_2 '\\'
# endif
# ifndef PATH_SEPARATOR_2
# define PATH_SEPARATOR_2 ';'
# endif
@@ -4263,20 +5636,20 @@ int setenv (const char *, const char *,
# define FOPEN_WB "w"
#endif
#ifndef _O_BINARY
# define _O_BINARY 0
#endif
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
+ if (stale) { free (stale); stale = 0; } \
} while (0)
-#if defined(LT_DEBUGWRAPPER)
+#if defined LT_DEBUGWRAPPER
static int lt_debug = 1;
#else
static int lt_debug = 0;
#endif
const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
void *xmalloc (size_t num);
@@ -4295,21 +5668,26 @@ void lt_setenv (const char *name, const
char *lt_extend_str (const char *orig_value, const char *add, int to_end);
void lt_update_exe_path (const char *name, const char *value);
void lt_update_lib_path (const char *name, const char *value);
char **prepare_spawn (char **argv);
void lt_dump_script (FILE *f);
EOF
cat < 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ size_t len = strlen (new_value);
+ while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
{
- new_value[len-1] = '\0';
+ new_value[--len] = '\0';
}
lt_setenv (name, new_value);
XFREE (new_value);
}
}
void
lt_update_lib_path (const char *name, const char *value)
@@ -5077,37 +6455,57 @@ D'
EOF
}
# end: func_emit_cwrapperexe_src
# func_win32_import_lib_p ARG
# True if ARG is an import lib, as indicated by $file_magic_cmd
func_win32_import_lib_p ()
{
- $opt_debug
+ $debug_cmd
+
case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
*import*) : ;;
*) false ;;
esac
}
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+ $debug_cmd
+
+ case " $compile_command " in
+ *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+ suncc_use_cstd_abi=no
+ ;;
+ *)
+ suncc_use_cstd_abi=yes
+ ;;
+ esac
+}
+
# func_mode_link arg...
func_mode_link ()
{
- $opt_debug
+ $debug_cmd
+
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
+ # what system we are compiling for in order to pass an extra
# flag for every libtool invocation.
# allow_undefined=no
# FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
+ # to make a dll that has undefined symbols, in which case not
# even a static library is built. For now, we need to specify
# -no-undefined on the libtool link line when we can be certain
# that all symbols are satisfied, otherwise we get a static library.
allow_undefined=yes
;;
*)
allow_undefined=yes
;;
@@ -5141,48 +6539,49 @@ func_mode_link ()
export_symbols=
export_symbols_regex=
generated=
libobjs=
ltlibs=
module=no
no_install=no
objs=
+ os2dllname=
non_pic_objects=
precious_files_regex=
prefer_static_libs=no
- preload=no
+ preload=false
prev=
prevarg=
release=
rpath=
xrpath=
perm_rpath=
temp_rpath=
thread_safe=no
vinfo=
vinfo_number=no
weak_libs=
- single_module="${wl}-single_module"
+ single_module=$wl-single_module
func_infer_tag $base_compile
# We need to know -static, to get the right output filenames.
for arg
do
case $arg in
-shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
+ test yes != "$build_libtool_libs" \
+ && func_fatal_configuration "cannot build a shared library"
build_old_libs=no
break
;;
-all-static | -static | -static-libtool-libs)
case $arg in
-all-static)
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
func_warning "complete static linking is impossible in this configuration"
fi
if test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
prefer_static_libs=yes
;;
-static)
@@ -5205,86 +6604,86 @@ func_mode_link ()
esac
done
# See if our shared archives depend on static archives.
test -n "$old_archive_from_new_cmds" && build_old_libs=yes
# Go through the arguments, transforming them on the way.
while test "$#" -gt 0; do
- arg="$1"
+ arg=$1
shift
func_quote_for_eval "$arg"
qarg=$func_quote_for_eval_unquoted_result
func_append libtool_args " $func_quote_for_eval_result"
# If the previous option needs an argument, assign it.
if test -n "$prev"; then
case $prev in
output)
func_append compile_command " @OUTPUT@"
func_append finalize_command " @OUTPUT@"
;;
esac
case $prev in
bindir)
- bindir="$arg"
+ bindir=$arg
prev=
continue
;;
dlfiles|dlprefiles)
- if test "$preload" = no; then
+ $preload || {
# Add the symbol object into the linking commands.
func_append compile_command " @SYMFILE@"
func_append finalize_command " @SYMFILE@"
- preload=yes
- fi
+ preload=:
+ }
case $arg in
*.la | *.lo) ;; # We handle these cases below.
force)
- if test "$dlself" = no; then
+ if test no = "$dlself"; then
dlself=needless
export_dynamic=yes
fi
prev=
continue
;;
self)
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
dlself=yes
else
dlself=needless
export_dynamic=yes
fi
prev=
continue
;;
*)
- if test "$prev" = dlfiles; then
+ if test dlfiles = "$prev"; then
func_append dlfiles " $arg"
else
func_append dlprefiles " $arg"
fi
prev=
continue
;;
esac
;;
expsyms)
- export_symbols="$arg"
+ export_symbols=$arg
test -f "$arg" \
- || func_fatal_error "symbol file \`$arg' does not exist"
+ || func_fatal_error "symbol file '$arg' does not exist"
prev=
continue
;;
expsyms_regex)
- export_symbols_regex="$arg"
+ export_symbols_regex=$arg
prev=
continue
;;
framework)
case $host in
*-*-darwin*)
case "$deplibs " in
*" $qarg.ltframework "*) ;;
@@ -5292,17 +6691,23 @@ func_mode_link ()
;;
esac
;;
esac
prev=
continue
;;
inst_prefix)
- inst_prefix_dir="$arg"
+ inst_prefix_dir=$arg
+ prev=
+ continue
+ ;;
+ mllvm)
+ # Clang does not use LLVM to link, so we can simply discard any
+ # '-mllvm $arg' options when doing the link step.
prev=
continue
;;
objectlist)
if test -f "$arg"; then
save_arg=$arg
moreargs=
for fil in `cat "$save_arg"`
@@ -5316,126 +6721,131 @@ func_mode_link ()
pic_object=
non_pic_object=
# Read the .lo file
func_source "$arg"
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
- if test "$pic_object" != none; then
+ if test none != "$pic_object"; then
# Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
+ pic_object=$xdir$pic_object
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
else
# If libtool objects are unsupported, then we need to preload.
prev=dlprefiles
fi
fi
# CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
fi
# A PIC object.
func_append libobjs " $pic_object"
- arg="$pic_object"
+ arg=$pic_object
fi
# Non-PIC object.
- if test "$non_pic_object" != none; then
+ if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
+ non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
+ non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
non_pic_object=$xdir$func_lo2o_result
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
- func_fatal_error "\`$arg' is not a valid libtool object"
+ func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
done
else
- func_fatal_error "link input file \`$arg' does not exist"
+ func_fatal_error "link input file '$arg' does not exist"
fi
arg=$save_arg
prev=
continue
;;
+ os2dllname)
+ os2dllname=$arg
+ prev=
+ continue
+ ;;
precious_regex)
- precious_files_regex="$arg"
+ precious_files_regex=$arg
prev=
continue
;;
release)
- release="-$arg"
+ release=-$arg
prev=
continue
;;
rpath | xrpath)
# We need an absolute path.
case $arg in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
func_fatal_error "only absolute run-paths are allowed"
;;
esac
- if test "$prev" = rpath; then
+ if test rpath = "$prev"; then
case "$rpath " in
*" $arg "*) ;;
*) func_append rpath " $arg" ;;
esac
else
case "$xrpath " in
*" $arg "*) ;;
*) func_append xrpath " $arg" ;;
esac
fi
prev=
continue
;;
shrext)
- shrext_cmds="$arg"
+ shrext_cmds=$arg
prev=
continue
;;
weak)
func_append weak_libs " $arg"
prev=
continue
;;
@@ -5465,31 +6875,31 @@ func_mode_link ()
*)
eval "$prev=\"\$arg\""
prev=
continue
;;
esac
fi # test -n "$prev"
- prevarg="$arg"
+ prevarg=$arg
case $arg in
-all-static)
if test -n "$link_static_flag"; then
# See comment for -static flag below, for more details.
func_append compile_command " $link_static_flag"
func_append finalize_command " $link_static_flag"
fi
continue
;;
-allow-undefined)
# FIXME: remove this flag sometime in the future.
- func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ func_fatal_error "'-allow-undefined' must not be used because it is the default"
;;
-avoid-version)
avoid_version=yes
continue
;;
-bindir)
@@ -5511,17 +6921,17 @@ func_mode_link ()
export_dynamic=yes
continue
;;
-export-symbols | -export-symbols-regex)
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
func_fatal_error "more than one -exported-symbols argument is not allowed"
fi
- if test "X$arg" = "X-export-symbols"; then
+ if test X-export-symbols = "X$arg"; then
prev=expsyms
else
prev=expsyms_regex
fi
continue
;;
-framework)
@@ -5545,31 +6955,31 @@ func_mode_link ()
esac
continue
;;
-L*)
func_stripname "-L" '' "$arg"
if test -z "$func_stripname_result"; then
if test "$#" -gt 0; then
- func_fatal_error "require no space between \`-L' and \`$1'"
+ func_fatal_error "require no space between '-L' and '$1'"
else
- func_fatal_error "need path for \`-L' option"
+ func_fatal_error "need path for '-L' option"
fi
fi
func_resolve_sysroot "$func_stripname_result"
dir=$func_resolve_sysroot_result
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
absdir=`cd "$dir" && pwd`
test -z "$absdir" && \
- func_fatal_error "cannot determine absolute directory name of \`$dir'"
- dir="$absdir"
+ func_fatal_error "cannot determine absolute directory name of '$dir'"
+ dir=$absdir
;;
esac
case "$deplibs " in
*" -L$dir "* | *" $arg "*)
# Will only happen for absolute or sysroot arguments
;;
*)
# Preserve sysroot, but never include relative directories
@@ -5594,56 +7004,61 @@ func_mode_link ()
*) func_append dllsearchpath ":$testbindir";;
esac
;;
esac
continue
;;
-l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ if test X-lc = "X$arg" || test X-lm = "X$arg"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
# These systems don't actually have a C or math library (as such)
continue
;;
*-*-os2*)
# These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
# Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
func_append deplibs " System.ltframework"
continue
;;
*-*-sco3.2v5* | *-*-sco5v6*)
# Causes problems with __ctype
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
esac
- elif test "X$arg" = "X-lc_r"; then
+ elif test X-lc_r = "X$arg"; then
case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
esac
fi
func_append deplibs " $arg"
continue
;;
+ -mllvm)
+ prev=mllvm
+ continue
+ ;;
+
-module)
module=yes
continue
;;
# Tru64 UNIX uses -model [arg] to determine the layout of C++
# classes, name mangling, and exception handling.
# Darwin uses the -arch flag to determine output architecture.
@@ -5663,32 +7078,32 @@ func_mode_link ()
case "$new_inherited_linker_flags " in
*" $arg "*) ;;
* ) func_append new_inherited_linker_flags " $arg" ;;
esac
continue
;;
-multi_module)
- single_module="${wl}-multi_module"
+ single_module=$wl-multi_module
continue
;;
-no-fast-install)
fast_install=no
continue
;;
-no-install)
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
# The PATH hackery in wrapper scripts is required on Windows
# and Darwin in order for the loader to find any dlls it needs.
- func_warning "\`-no-install' is ignored for $host"
- func_warning "assuming \`-no-fast-install' instead"
+ func_warning "'-no-install' is ignored for $host"
+ func_warning "assuming '-no-fast-install' instead"
fast_install=no
;;
*) no_install=yes ;;
esac
continue
;;
-no-undefined)
@@ -5696,16 +7111,21 @@ func_mode_link ()
continue
;;
-objectlist)
prev=objectlist
continue
;;
+ -os2dllname)
+ prev=os2dllname
+ continue
+ ;;
+
-o) prev=output ;;
-precious-files-regex)
prev=precious_regex
continue
;;
-release)
@@ -5783,41 +7203,41 @@ func_mode_link ()
prev=weak
continue
;;
-Wc,*)
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
arg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for flag in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_quote_for_eval "$flag"
func_append arg " $func_quote_for_eval_result"
func_append compiler_flags " $func_quote_for_eval_result"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
-Wl,*)
func_stripname '-Wl,' '' "$arg"
args=$func_stripname_result
arg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for flag in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_quote_for_eval "$flag"
func_append arg " $wl$func_quote_for_eval_result"
func_append compiler_flags " $wl$func_quote_for_eval_result"
func_append linker_flags " $func_quote_for_eval_result"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
-Xcompiler)
prev=xcompiler
continue
;;
@@ -5830,47 +7250,68 @@ func_mode_link ()
-XCClinker)
prev=xcclinker
continue
;;
# -msg_* for osf cc
-msg_*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
# Flags to be passed through unchanged, with rationale:
# -64, -mips[0-9] enable 64-bit mode for the SGI compiler
# -r[0-9][0-9]* specify processor for the SGI compiler
# -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
# +DA*, +DD* enable 64-bit mode for the HP compiler
# -q* compiler args for the IBM compiler
# -m*, -t[45]*, -txscale* architecture-specific flags for GCC
# -F/path path to uninstalled frameworks, gcc on darwin
# -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # -fstack-protector* stack protector flags for GCC
# @file GCC response files
# -tp=* Portland pgcc target processor selection
# --sysroot=* for sysroot support
- # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ # -stdlib=* select c++ std lib with clang
-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
- -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
func_append compile_command " $arg"
func_append finalize_command " $arg"
func_append compiler_flags " $arg"
continue
;;
+ -Z*)
+ if test os2 = "`expr $host : '.*\(os2\)'`"; then
+ # OS/2 uses -Zxxx to specify OS/2-specific options
+ compiler_flags="$compiler_flags $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case $arg in
+ -Zlinker | -Zstack)
+ prev=xcompiler
+ ;;
+ esac
+ continue
+ else
+ # Otherwise treat like 'Some other compiler flag' below
+ func_quote_for_eval "$arg"
+ arg=$func_quote_for_eval_result
+ fi
+ ;;
+
# Some other compiler flag.
-* | +*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
*.$objext)
# A standard object.
func_append objs " $arg"
;;
*.lo)
@@ -5881,153 +7322,156 @@ func_mode_link ()
pic_object=
non_pic_object=
# Read the .lo file
func_source "$arg"
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
- if test "$pic_object" != none; then
+ test none = "$pic_object" || {
# Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
+ pic_object=$xdir$pic_object
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
else
# If libtool objects are unsupported, then we need to preload.
prev=dlprefiles
fi
fi
# CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
fi
# A PIC object.
func_append libobjs " $pic_object"
- arg="$pic_object"
- fi
+ arg=$pic_object
+ }
# Non-PIC object.
- if test "$non_pic_object" != none; then
+ if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
+ non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
+ non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
non_pic_object=$xdir$func_lo2o_result
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
- func_fatal_error "\`$arg' is not a valid libtool object"
+ func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
;;
*.$libext)
# An archive.
func_append deplibs " $arg"
func_append old_deplibs " $arg"
continue
;;
*.la)
# A libtool-controlled library.
func_resolve_sysroot "$arg"
- if test "$prev" = dlfiles; then
+ if test dlfiles = "$prev"; then
# This library was specified with -dlopen.
func_append dlfiles " $func_resolve_sysroot_result"
prev=
- elif test "$prev" = dlprefiles; then
+ elif test dlprefiles = "$prev"; then
# The library was specified with -dlpreopen.
func_append dlprefiles " $func_resolve_sysroot_result"
prev=
else
func_append deplibs " $func_resolve_sysroot_result"
fi
continue
;;
# Some other compiler argument.
*)
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
esac # arg
# Now actually substitute the argument into the commands.
if test -n "$arg"; then
func_append compile_command " $arg"
func_append finalize_command " $arg"
fi
done # argument parsing loop
test -n "$prev" && \
- func_fatal_help "the \`$prevarg' option requires an argument"
+ func_fatal_help "the '$prevarg' option requires an argument"
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
eval arg=\"$export_dynamic_flag_spec\"
func_append compile_command " $arg"
func_append finalize_command " $arg"
fi
oldlibs=
# calculate the name of the file, without its directory
func_basename "$output"
- outputname="$func_basename_result"
- libobjs_save="$libobjs"
+ outputname=$func_basename_result
+ libobjs_save=$libobjs
if test -n "$shlibpath_var"; then
# get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
else
shlib_search_path=
fi
eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+ # Definition is injected by LT_CONFIG during libtool generation.
+ func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
func_dirname "$output" "/" ""
- output_objdir="$func_dirname_result$objdir"
+ output_objdir=$func_dirname_result$objdir
func_to_tool_file "$output_objdir/"
tool_output_objdir=$func_to_tool_file_result
# Create the object directory.
func_mkdir_p "$output_objdir"
# Determine the type of output
case $output in
"")
@@ -6040,25 +7484,25 @@ func_mode_link ()
esac
specialdeplibs=
libs=
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
for deplib in $deplibs; do
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
func_append libs " $deplib"
done
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
libs="$predeps $libs $compiler_lib_search_path $postdeps"
# Compute libraries that are listed more than once in $predeps
# $postdeps and mark them as special (i.e., whose duplicates are
# not to be eliminated).
pre_post_deps=
if $opt_duplicate_compiler_generated_deps; then
for pre_post_dep in $predeps $postdeps; do
@@ -6080,59 +7524,59 @@ func_mode_link ()
case $linkmode in
lib)
passes="conv dlpreopen link"
for file in $dlfiles $dlprefiles; do
case $file in
*.la) ;;
*)
- func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
;;
esac
done
;;
prog)
compile_deplibs=
finalize_deplibs=
- alldeplibs=no
+ alldeplibs=false
newdlfiles=
newdlprefiles=
passes="conv scan dlopen dlpreopen link"
;;
*) passes="conv"
;;
esac
for pass in $passes; do
# The preopen pass in lib mode reverses $deplibs; put it back here
# so that -L comes before libs that need it for instance...
- if test "$linkmode,$pass" = "lib,link"; then
+ if test lib,link = "$linkmode,$pass"; then
## FIXME: Find the place where the list is rebuilt in the wrong
## order, and fix it there properly
tmp_deplibs=
for deplib in $deplibs; do
tmp_deplibs="$deplib $tmp_deplibs"
done
- deplibs="$tmp_deplibs"
+ deplibs=$tmp_deplibs
fi
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass"; then
+ libs=$deplibs
deplibs=
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
+ dlopen) libs=$dlfiles ;;
+ dlpreopen) libs=$dlprefiles ;;
link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
esac
fi
- if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ if test lib,dlpreopen = "$linkmode,$pass"; then
# Collect and forward deplibs of preopened libtool libs
for lib in $dlprefiles; do
# Ignore non-libtool-libs
dependency_libs=
func_resolve_sysroot "$lib"
case $lib in
*.la) func_source "$func_resolve_sysroot_result" ;;
esac
@@ -6143,162 +7587,163 @@ func_mode_link ()
func_basename "$deplib"
deplib_base=$func_basename_result
case " $weak_libs " in
*" $deplib_base "*) ;;
*) func_append deplibs " $deplib" ;;
esac
done
done
- libs="$dlprefiles"
+ libs=$dlprefiles
fi
- if test "$pass" = dlopen; then
+ if test dlopen = "$pass"; then
# Collect dlpreopened libraries
- save_deplibs="$deplibs"
+ save_deplibs=$deplibs
deplibs=
fi
for deplib in $libs; do
lib=
- found=no
+ found=false
case $deplib in
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
|-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
func_append compiler_flags " $deplib"
- if test "$linkmode" = lib ; then
+ if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
esac
fi
fi
continue
;;
-l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- func_warning "\`-l' is ignored for archives/objects"
+ if test lib != "$linkmode" && test prog != "$linkmode"; then
+ func_warning "'-l' is ignored for archives/objects"
continue
fi
func_stripname '-l' '' "$deplib"
name=$func_stripname_result
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
else
searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
fi
for searchdir in $searchdirs; do
for search_ext in .la $std_shrext .so .a; do
# Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
+ lib=$searchdir/lib$name$search_ext
if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
+ if test .la = "$search_ext"; then
+ found=:
else
- found=no
+ found=false
fi
break 2
fi
done
done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
+ if $found; then
+ # deplib is a libtool library
# If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
# We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $deplib "*)
if func_lalib_p "$lib"; then
library_names=
old_library=
func_source "$lib"
for l in $old_library $library_names; do
- ll="$l"
+ ll=$l
done
- if test "X$ll" = "X$old_library" ; then # only static version available
- found=no
+ if test "X$ll" = "X$old_library"; then # only static version available
+ found=false
func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
+ ladir=$func_dirname_result
lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
fi
continue
fi
fi
;;
*) ;;
esac
fi
+ else
+ # deplib doesn't seem to be a libtool library
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
fi
;; # -l
*.ltframework)
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- if test "$linkmode" = lib ; then
+ if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
esac
fi
fi
continue
;;
-L*)
case $linkmode in
lib)
deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
+ test conv = "$pass" && continue
newdependency_libs="$deplib $newdependency_libs"
func_stripname '-L' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
prog)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
- if test "$pass" = scan; then
+ if test scan = "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
fi
func_stripname '-L' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
*)
- func_warning "\`-L' is ignored for archives/objects"
+ func_warning "'-L' is ignored for archives/objects"
;;
esac # linkmode
continue
;; # -L
-R*)
- if test "$pass" = link; then
+ if test link = "$pass"; then
func_stripname '-R' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
dir=$func_resolve_sysroot_result
# Make sure the xrpath contains only unique directories.
case "$xrpath " in
*" $dir "*) ;;
*) func_append xrpath " $dir" ;;
esac
@@ -6306,103 +7751,101 @@ func_mode_link ()
deplibs="$deplib $deplibs"
continue
;;
*.la)
func_resolve_sysroot "$deplib"
lib=$func_resolve_sysroot_result
;;
*.$libext)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
case $linkmode in
lib)
# Linking convenience modules into shared libraries is allowed,
# but linking other static libraries is non-portable.
case " $dlpreconveniencelibs " in
*" $deplib "*) ;;
*)
- valid_a_lib=no
+ valid_a_lib=false
case $deplibs_check_method in
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
+ valid_a_lib=:
fi
;;
pass_all)
- valid_a_lib=yes
+ valid_a_lib=:
;;
esac
- if test "$valid_a_lib" != yes; then
+ if $valid_a_lib; then
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ else
echo
$ECHO "*** Warning: Trying to link with static lib archive $deplib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because the file extensions .$libext of this argument makes me believe"
echo "*** that it is just a static archive that I should not use here."
- else
- echo
- $ECHO "*** Warning: Linking the shared library $output against the"
- $ECHO "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
fi
;;
esac
continue
;;
prog)
- if test "$pass" != link; then
+ if test link != "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
fi
continue
;;
esac # linkmode
;; # *.$libext
*.lo | *.$objext)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ elif test prog = "$linkmode"; then
+ if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
func_append newdlprefiles " $deplib"
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
func_append newdlfiles " $deplib"
fi
fi
continue
;;
%DEPLIBS%)
- alldeplibs=yes
+ alldeplibs=:
continue
;;
esac # case $deplib
- if test "$found" = yes || test -f "$lib"; then :
- else
- func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
- fi
+ $found || test -f "$lib" \
+ || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$lib" \
- || func_fatal_error "\`$lib' is not a valid libtool archive"
+ || func_fatal_error "'$lib' is not a valid libtool archive"
func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
+ ladir=$func_dirname_result
dlname=
dlopen=
dlpreopen=
libdir=
library_names=
old_library=
inherited_linker_flags=
@@ -6422,133 +7865,133 @@ func_mode_link ()
for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
case " $new_inherited_linker_flags " in
*" $tmp_inherited_linker_flag "*) ;;
*) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
esac
done
fi
dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass" ||
+ { test prog != "$linkmode" && test lib != "$linkmode"; }; then
test -n "$dlopen" && func_append dlfiles " $dlopen"
test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
fi
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
# Only check for convenience libraries
deplibs="$lib $deplibs"
if test -z "$libdir"; then
if test -z "$old_library"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
+ func_fatal_error "cannot find name of link library for '$lib'"
fi
# It is a libtool convenience library, so add in its objects.
func_append convenience " $ladir/$objdir/$old_library"
func_append old_convenience " $ladir/$objdir/$old_library"
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- func_fatal_error "\`$lib' is not a convenience library"
+ elif test prog != "$linkmode" && test lib != "$linkmode"; then
+ func_fatal_error "'$lib' is not a convenience library"
fi
tmp_libs=
for deplib in $dependency_libs; do
deplibs="$deplib $deplibs"
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
func_append tmp_libs " $deplib"
done
continue
fi # $pass = conv
# Get the name of the library we link against.
linklib=
if test -n "$old_library" &&
- { test "$prefer_static_libs" = yes ||
- test "$prefer_static_libs,$installed" = "built,no"; }; then
+ { test yes = "$prefer_static_libs" ||
+ test built,no = "$prefer_static_libs,$installed"; }; then
linklib=$old_library
else
for l in $old_library $library_names; do
- linklib="$l"
+ linklib=$l
done
fi
if test -z "$linklib"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
+ func_fatal_error "cannot find name of link library for '$lib'"
fi
# This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
- fi
+ if test dlopen = "$pass"; then
+ test -z "$libdir" \
+ && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
+ test yes != "$dlopen_support" ||
+ test no = "$build_libtool_libs"
+ then
# If there is no dlname, no dlopen support or we're linking
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
# bomb out in the load deplibs phase.
func_append dlprefiles " $lib $dependency_libs"
else
func_append newdlfiles " $lib"
fi
continue
fi # $pass = dlopen
# We need an absolute path.
case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
*)
abs_ladir=`cd "$ladir" && pwd`
if test -z "$abs_ladir"; then
- func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "cannot determine absolute directory name of '$ladir'"
func_warning "passing it literally to the linker, although it might fail"
- abs_ladir="$ladir"
+ abs_ladir=$ladir
fi
;;
esac
func_basename "$lib"
- laname="$func_basename_result"
+ laname=$func_basename_result
# Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
+ if test yes = "$installed"; then
if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- func_warning "library \`$lib' was moved."
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
+ func_warning "library '$lib' was moved."
+ dir=$ladir
+ absdir=$abs_ladir
+ libdir=$abs_ladir
else
- dir="$lt_sysroot$libdir"
- absdir="$lt_sysroot$libdir"
+ dir=$lt_sysroot$libdir
+ absdir=$lt_sysroot$libdir
fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ test yes = "$hardcode_automatic" && avoidtemprpath=yes
else
if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
+ dir=$ladir
+ absdir=$abs_ladir
# Remove this search path later
func_append notinst_path " $abs_ladir"
else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
+ dir=$ladir/$objdir
+ absdir=$abs_ladir/$objdir
# Remove this search path later
func_append notinst_path " $abs_ladir"
fi
fi # $installed = yes
func_stripname 'lib' '.la' "$laname"
name=$func_stripname_result
# This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir" && test "$linkmode" = prog; then
- func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ if test dlpreopen = "$pass"; then
+ if test -z "$libdir" && test prog = "$linkmode"; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
fi
- case "$host" in
+ case $host in
# special handling for platforms with PE-DLLs.
*cygwin* | *mingw* | *cegcc* )
# Linker will automatically link against shared library if both
# static and shared are present. Therefore, ensure we extract
# symbols from the import library if a shared library is present
# (otherwise, the dlopen module name will be incorrect). We do
# this by putting the import library name into $newdlprefiles.
# We recover the dlopen module name by 'saving' the la file
@@ -6582,73 +8025,73 @@ func_mode_link ()
func_append newdlprefiles " $dir/$linklib"
fi
;;
esac
fi # $pass = dlpreopen
if test -z "$libdir"; then
# Link the convenience library
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
+ elif test prog,link = "$linkmode,$pass"; then
compile_deplibs="$dir/$old_library $compile_deplibs"
finalize_deplibs="$dir/$old_library $finalize_deplibs"
else
deplibs="$lib $deplibs" # used for prog,scan pass
fi
continue
fi
- if test "$linkmode" = prog && test "$pass" != link; then
+ if test prog = "$linkmode" && test link != "$pass"; then
func_append newlib_search_path " $ladir"
deplibs="$lib $deplibs"
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
+ linkalldeplibs=false
+ if test no != "$link_all_deplibs" || test -z "$library_names" ||
+ test no = "$build_libtool_libs"; then
+ linkalldeplibs=:
fi
tmp_libs=
for deplib in $dependency_libs; do
case $deplib in
-L*) func_stripname '-L' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
esac
# Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
+ if $linkalldeplibs; then
deplibs="$deplib $deplibs"
else
# Need to hardcode shared library paths
# or/and link against static libraries
newdependency_libs="$deplib $newdependency_libs"
fi
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
fi
func_append tmp_libs " $deplib"
done # for deplib
continue
fi # $linkmode = prog...
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
if test -n "$library_names" &&
- { { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ { { test no = "$prefer_static_libs" ||
+ test built,yes = "$prefer_static_libs,$installed"; } ||
test -z "$old_library"; }; then
# We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
# Make sure the rpath contains only unique directories.
- case "$temp_rpath:" in
+ case $temp_rpath: in
*"$absdir:"*) ;;
*) func_append temp_rpath "$absdir:" ;;
esac
fi
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
@@ -6667,67 +8110,67 @@ func_mode_link ()
case "$finalize_rpath " in
*" $libdir "*) ;;
*) func_append finalize_rpath " $libdir" ;;
esac
;;
esac
fi # $linkmode,$pass = prog,link...
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
+ if $alldeplibs &&
+ { test pass_all = "$deplibs_check_method" ||
+ { test yes = "$build_libtool_libs" &&
test -n "$library_names"; }; }; then
# We only need to search for static libraries
continue
fi
fi
link_static=no # Whether the deplib will be linked statically
use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes; then
+ if test built = "$use_static_libs" && test yes = "$installed"; then
use_static_libs=no
fi
if test -n "$library_names" &&
- { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ { test no = "$use_static_libs" || test -z "$old_library"; }; then
case $host in
- *cygwin* | *mingw* | *cegcc*)
+ *cygwin* | *mingw* | *cegcc* | *os2*)
# No point in relinking DLLs because paths are not encoded
func_append notinst_deplibs " $lib"
need_relink=no
;;
*)
- if test "$installed" = no; then
+ if test no = "$installed"; then
func_append notinst_deplibs " $lib"
need_relink=yes
fi
;;
esac
# This is a shared library
# Warn about portability, can't link against -module's on some
# systems (darwin). Don't bleat about dlopened modules though!
- dlopenmodule=""
+ dlopenmodule=
for dlpremoduletest in $dlprefiles; do
if test "X$dlpremoduletest" = "X$lib"; then
- dlopenmodule="$dlpremoduletest"
+ dlopenmodule=$dlpremoduletest
break
fi
done
- if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
echo
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
$ECHO "*** Warning: Linking the executable $output against the loadable module"
else
$ECHO "*** Warning: Linking the shared library $output against the loadable module"
fi
$ECHO "*** $linklib is not portable!"
fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
+ if test lib = "$linkmode" &&
+ test yes = "$hardcode_into_libs"; then
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
case " $sys_lib_dlsearch_path " in
*" $absdir "*) ;;
*)
case "$compile_rpath " in
*" $absdir "*) ;;
@@ -6745,393 +8188,393 @@ func_mode_link ()
;;
esac
fi
if test -n "$old_archive_from_expsyms_cmds"; then
# figure out the soname
set dummy $library_names
shift
- realname="$1"
+ realname=$1
shift
libname=`eval "\\$ECHO \"$libname_spec\""`
# use dlname if we got it. it's perfectly good, no?
if test -n "$dlname"; then
- soname="$dlname"
+ soname=$dlname
elif test -n "$soname_spec"; then
# bleh windows
case $host in
- *cygwin* | mingw* | *cegcc*)
+ *cygwin* | mingw* | *cegcc* | *os2*)
func_arith $current - $age
major=$func_arith_result
- versuffix="-$major"
+ versuffix=-$major
;;
esac
eval soname=\"$soname_spec\"
else
- soname="$realname"
+ soname=$realname
fi
# Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
+ soroot=$soname
func_basename "$soroot"
- soname="$func_basename_result"
+ soname=$func_basename_result
func_stripname 'lib' '.dll' "$soname"
newlib=libimp-$func_stripname_result.a
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
else
- func_verbose "extracting exported symbol list from \`$soname'"
+ func_verbose "extracting exported symbol list from '$soname'"
func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
fi
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
- func_verbose "generating import library for \`$soname'"
+ func_verbose "generating import library for '$soname'"
func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
fi
# make sure the library variables are pointing to the new library
dir=$output_objdir
linklib=$newlib
fi # test -n "$old_archive_from_expsyms_cmds"
- if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ if test prog = "$linkmode" || test relink != "$opt_mode"; then
add_shlibpath=
add_dir=
add=
lib_linked=yes
case $hardcode_action in
immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
+ if test no = "$hardcode_direct"; then
+ add=$dir/$linklib
case $host in
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+ *-*-sysv4*uw2*) add_dir=-L$dir ;;
*-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
- *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-unixware7*) add_dir=-L$dir ;;
*-*-darwin* )
- # if the lib is a (non-dlopened) module then we can not
+ # if the lib is a (non-dlopened) module then we cannot
# link against it, someone is ignoring the earlier warnings
if /usr/bin/file -L $add 2> /dev/null |
- $GREP ": [^:]* bundle" >/dev/null ; then
+ $GREP ": [^:]* bundle" >/dev/null; then
if test "X$dlopenmodule" != "X$lib"; then
$ECHO "*** Warning: lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
+ if test -z "$old_library"; then
echo
echo "*** And there doesn't seem to be a static archive available"
echo "*** The link will probably fail, sorry"
else
- add="$dir/$old_library"
+ add=$dir/$old_library
fi
elif test -n "$old_library"; then
- add="$dir/$old_library"
+ add=$dir/$old_library
fi
fi
esac
- elif test "$hardcode_minus_L" = no; then
+ elif test no = "$hardcode_minus_L"; then
case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
+ *-*-sunos*) add_shlibpath=$dir ;;
esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
+ add_dir=-L$dir
+ add=-l$name
+ elif test no = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
else
lib_linked=no
fi
;;
relink)
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$absdir"
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$dir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$absdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
func_append add_dir " -L$inst_prefix_dir$libdir"
;;
esac
fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
else
lib_linked=no
fi
;;
*) lib_linked=no ;;
esac
- if test "$lib_linked" != yes; then
+ if test yes != "$lib_linked"; then
func_fatal_configuration "unsupported hardcode properties"
fi
if test -n "$add_shlibpath"; then
case :$compile_shlibpath: in
*":$add_shlibpath:"*) ;;
*) func_append compile_shlibpath "$add_shlibpath:" ;;
esac
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
test -n "$add" && compile_deplibs="$add $compile_deplibs"
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes &&
- test "$hardcode_minus_L" != yes &&
- test "$hardcode_shlibpath_var" = yes; then
+ if test yes != "$hardcode_direct" &&
+ test yes != "$hardcode_minus_L" &&
+ test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
esac
fi
fi
fi
- if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ if test prog = "$linkmode" || test relink = "$opt_mode"; then
add_shlibpath=
add_dir=
add=
# Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$libdir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$libdir
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
+ add=-l$name
+ elif test yes = "$hardcode_automatic"; then
if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
+ test -f "$inst_prefix_dir$libdir/$linklib"; then
+ add=$inst_prefix_dir$libdir/$linklib
else
- add="$libdir/$linklib"
+ add=$libdir/$linklib
fi
else
# We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
+ add_dir=-L$libdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
func_append add_dir " -L$inst_prefix_dir$libdir"
;;
esac
fi
- add="-l$name"
+ add=-l$name
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
fi
fi
- elif test "$linkmode" = prog; then
+ elif test prog = "$linkmode"; then
# Here we assume that one of hardcode_direct or hardcode_minus_L
# is not unsupported. This is valid on all known static and
# shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
+ if test unsupported != "$hardcode_direct"; then
+ test -n "$old_library" && linklib=$old_library
compile_deplibs="$dir/$linklib $compile_deplibs"
finalize_deplibs="$dir/$linklib $finalize_deplibs"
else
compile_deplibs="-l$name -L$dir $compile_deplibs"
finalize_deplibs="-l$name -L$dir $finalize_deplibs"
fi
- elif test "$build_libtool_libs" = yes; then
+ elif test yes = "$build_libtool_libs"; then
# Not a shared library
- if test "$deplibs_check_method" != pass_all; then
+ if test pass_all != "$deplibs_check_method"; then
# We're trying link a shared library against a static one
# but the system doesn't support it.
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
echo
- $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ $ECHO "*** Warning: This system cannot link to static lib archive $lib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
+ if test yes = "$module"; then
echo "*** But as you try to build a module library, libtool will still create "
echo "*** a static module, that should work as long as the dlopening application"
echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
- if test "$build_old_libs" = no; then
+ if test no = "$build_old_libs"; then
build_libtool_libs=module
build_old_libs=yes
else
build_libtool_libs=no
fi
fi
else
deplibs="$dir/$old_library $deplibs"
link_static=yes
fi
fi # link shared/static library?
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
+ { test yes != "$hardcode_into_libs" ||
+ test yes = "$build_old_libs" ||
+ test yes = "$link_static"; }; then
# Extract -R from dependency_libs
temp_deplibs=
for libdir in $dependency_libs; do
case $libdir in
-R*) func_stripname '-R' '' "$libdir"
temp_xrpath=$func_stripname_result
case " $xrpath " in
*" $temp_xrpath "*) ;;
*) func_append xrpath " $temp_xrpath";;
esac;;
*) func_append temp_deplibs " $libdir";;
esac
done
- dependency_libs="$temp_deplibs"
+ dependency_libs=$temp_deplibs
fi
func_append newlib_search_path " $absdir"
# Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
# ... and its dependency_libs
tmp_libs=
for deplib in $dependency_libs; do
newdependency_libs="$deplib $newdependency_libs"
case $deplib in
-L*) func_stripname '-L' '' "$deplib"
func_resolve_sysroot "$func_stripname_result";;
*) func_resolve_sysroot "$deplib" ;;
esac
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $func_resolve_sysroot_result "*)
func_append specialdeplibs " $func_resolve_sysroot_result" ;;
esac
fi
func_append tmp_libs " $func_resolve_sysroot_result"
done
- if test "$link_all_deplibs" != no; then
+ if test no != "$link_all_deplibs"; then
# Add the search paths of all dependency libraries
for deplib in $dependency_libs; do
path=
case $deplib in
- -L*) path="$deplib" ;;
+ -L*) path=$deplib ;;
*.la)
func_resolve_sysroot "$deplib"
deplib=$func_resolve_sysroot_result
func_dirname "$deplib" "" "."
dir=$func_dirname_result
# We need an absolute path.
case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
- func_warning "cannot determine absolute directory name of \`$dir'"
- absdir="$dir"
+ func_warning "cannot determine absolute directory name of '$dir'"
+ absdir=$dir
fi
;;
esac
if $GREP "^installed=no" $deplib > /dev/null; then
case $host in
*-*-darwin*)
depdepl=
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
+ eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names"; then
+ for tmp in $deplibrary_names; do
depdepl=$tmp
done
- if test -f "$absdir/$objdir/$depdepl" ; then
- depdepl="$absdir/$objdir/$depdepl"
- darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -f "$absdir/$objdir/$depdepl"; then
+ depdepl=$absdir/$objdir/$depdepl
+ darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
if test -z "$darwin_install_name"; then
- darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
fi
- func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
- func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+ func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
path=
fi
fi
;;
*)
- path="-L$absdir/$objdir"
+ path=-L$absdir/$objdir
;;
esac
else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_fatal_error "'$deplib' is not a valid libtool archive"
test "$absdir" != "$libdir" && \
- func_warning "\`$deplib' seems to be moved"
+ func_warning "'$deplib' seems to be moved"
- path="-L$absdir"
+ path=-L$absdir
fi
;;
esac
case " $deplibs " in
*" $path "*) ;;
*) deplibs="$path $deplibs" ;;
esac
done
fi # link_all_deplibs != no
fi # linkmode = lib
done # for deplib in $libs
- if test "$pass" = link; then
- if test "$linkmode" = "prog"; then
+ if test link = "$pass"; then
+ if test prog = "$linkmode"; then
compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
else
compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
fi
fi
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
+ dependency_libs=$newdependency_libs
+ if test dlpreopen = "$pass"; then
# Link the dlpreopened libraries before other libraries
for deplib in $save_deplibs; do
deplibs="$deplib $deplibs"
done
fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
+ if test dlopen != "$pass"; then
+ test conv = "$pass" || {
# Make sure lib_search_path contains only unique directories.
lib_search_path=
for dir in $newlib_search_path; do
case "$lib_search_path " in
*" $dir "*) ;;
*) func_append lib_search_path " $dir" ;;
esac
done
newlib_search_path=
- fi
+ }
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
+ if test prog,link = "$linkmode,$pass"; then
vars="compile_deplibs finalize_deplibs"
+ else
+ vars=deplibs
fi
for var in $vars dependency_libs; do
# Add libraries to $var in reverse order
eval tmp_libs=\"\$$var\"
new_libs=
for deplib in $tmp_libs; do
# FIXME: Pedantically, this is the right thing to do, so
# that some nasty dependency loop isn't accidentally
@@ -7179,404 +8622,453 @@ func_mode_link ()
esac
;;
*) func_append tmp_libs " $deplib" ;;
esac
done
eval $var=\"$tmp_libs\"
done # for var
fi
+
+ # Add Sun CC postdeps if required:
+ test CXX = "$tagname" && {
+ case $host_os in
+ linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C++ 5.9
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ func_cc_basename "$CC"
+ case $func_cc_basename_result in
+ CC* | sunCC*)
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ }
+
# Last step: remove runtime libs from dependency_libs
# (they stay in deplibs)
tmp_libs=
- for i in $dependency_libs ; do
+ for i in $dependency_libs; do
case " $predeps $postdeps $compiler_lib_search_path " in
*" $i "*)
- i=""
+ i=
;;
esac
- if test -n "$i" ; then
+ if test -n "$i"; then
func_append tmp_libs " $i"
fi
done
dependency_libs=$tmp_libs
done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
+ if test prog = "$linkmode"; then
+ dlfiles=$newdlfiles
fi
- if test "$linkmode" = prog || test "$linkmode" = lib; then
- dlprefiles="$newdlprefiles"
+ if test prog = "$linkmode" || test lib = "$linkmode"; then
+ dlprefiles=$newdlprefiles
fi
case $linkmode in
oldlib)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for archives"
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for archives"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ func_warning "'-l' and '-L' are ignored for archives" ;;
esac
test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for archives"
+ func_warning "'-rpath' is ignored for archives"
test -n "$xrpath" && \
- func_warning "\`-R' is ignored for archives"
+ func_warning "'-R' is ignored for archives"
test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for archives"
+ func_warning "'-version-info/-version-number' is ignored for archives"
test -n "$release" && \
- func_warning "\`-release' is ignored for archives"
+ func_warning "'-release' is ignored for archives"
test -n "$export_symbols$export_symbols_regex" && \
- func_warning "\`-export-symbols' is ignored for archives"
+ func_warning "'-export-symbols' is ignored for archives"
# Now set the variables for building old libraries.
build_libtool_libs=no
- oldlibs="$output"
+ oldlibs=$output
func_append objs "$old_deplibs"
;;
lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
+ # Make sure we only generate libraries of the form 'libNAME.la'.
case $outputname in
lib*)
func_stripname 'lib' '.la' "$outputname"
name=$func_stripname_result
eval shared_ext=\"$shrext_cmds\"
eval libname=\"$libname_spec\"
;;
*)
- test "$module" = no && \
- func_fatal_help "libtool library \`$output' must begin with \`lib'"
+ test no = "$module" \
+ && func_fatal_help "libtool library '$output' must begin with 'lib'"
- if test "$need_lib_prefix" != no; then
+ if test no != "$need_lib_prefix"; then
# Add the "lib" prefix for modules if required
func_stripname '' '.la' "$outputname"
name=$func_stripname_result
eval shared_ext=\"$shrext_cmds\"
eval libname=\"$libname_spec\"
else
func_stripname '' '.la' "$outputname"
libname=$func_stripname_result
fi
;;
esac
if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ if test pass_all != "$deplibs_check_method"; then
+ func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
else
echo
$ECHO "*** Warning: Linking the shared library $output against the non-libtool"
$ECHO "*** objects $objs is not portable!"
func_append libobjs " $objs"
fi
fi
- test "$dlself" != no && \
- func_warning "\`-dlopen self' is ignored for libtool libraries"
+ test no = "$dlself" \
+ || func_warning "'-dlopen self' is ignored for libtool libraries"
set dummy $rpath
shift
- test "$#" -gt 1 && \
- func_warning "ignoring multiple \`-rpath's for a libtool library"
+ test 1 -lt "$#" \
+ && func_warning "ignoring multiple '-rpath's for a libtool library"
- install_libdir="$1"
+ install_libdir=$1
oldlibs=
if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
# Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
+ # Some compilers have problems with a '.al' extension so
# convenience libraries should have the same extension an
# archive normally would.
oldlibs="$output_objdir/$libname.$libext $oldlibs"
build_libtool_libs=convenience
build_old_libs=yes
fi
test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+ func_warning "'-version-info/-version-number' is ignored for convenience libraries"
test -n "$release" && \
- func_warning "\`-release' is ignored for convenience libraries"
+ func_warning "'-release' is ignored for convenience libraries"
else
# Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
+ save_ifs=$IFS; IFS=:
set dummy $vinfo 0 0 0
shift
- IFS="$save_ifs"
+ IFS=$save_ifs
test -n "$7" && \
- func_fatal_help "too many parameters to \`-version-info'"
+ func_fatal_help "too many parameters to '-version-info'"
# convert absolute version numbers to libtool ages
# this retains compatibility with .la files and attempts
# to make the code below a bit more comprehensible
case $vinfo_number in
yes)
- number_major="$1"
- number_minor="$2"
- number_revision="$3"
+ number_major=$1
+ number_minor=$2
+ number_revision=$3
#
# There are really only two kinds -- those that
# use the current revision as the major version
# and those that subtract age and use age as
# a minor version. But, then there is irix
- # which has an extra 1 added just for fun
+ # that has an extra 1 added just for fun
#
case $version_type in
# correct linux to gnu/linux during the next big refactor
- darwin|linux|osf|windows|none)
+ darwin|freebsd-elf|linux|osf|windows|none)
func_arith $number_major + $number_minor
current=$func_arith_result
- age="$number_minor"
- revision="$number_revision"
+ age=$number_minor
+ revision=$number_revision
;;
- freebsd-aout|freebsd-elf|qnx|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
+ freebsd-aout|qnx|sunos)
+ current=$number_major
+ revision=$number_minor
+ age=0
;;
irix|nonstopux)
func_arith $number_major + $number_minor
current=$func_arith_result
- age="$number_minor"
- revision="$number_minor"
+ age=$number_minor
+ revision=$number_minor
lt_irix_increment=no
;;
esac
;;
no)
- current="$1"
- revision="$2"
- age="$3"
+ current=$1
+ revision=$2
+ age=$3
;;
esac
# Check that each of the things are valid numbers.
case $current in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "CURRENT \`$current' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "CURRENT '$current' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $revision in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "REVISION \`$revision' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "REVISION '$revision' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $age in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "AGE \`$age' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "AGE '$age' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
if test "$age" -gt "$current"; then
- func_error "AGE \`$age' is greater than the current interface number \`$current'"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "AGE '$age' is greater than the current interface number '$current'"
+ func_fatal_error "'$vinfo' is not valid version information"
fi
# Calculate the version variables.
major=
versuffix=
verstring=
case $version_type in
none) ;;
darwin)
# Like Linux, but with the current version available in
# verstring for coding it into the library header
func_arith $current - $age
major=.$func_arith_result
- versuffix="$major.$age.$revision"
+ versuffix=$major.$age.$revision
# Darwin ld doesn't like 0 for these options...
func_arith $current + 1
minor_current=$func_arith_result
- xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ # On Darwin other compilers
+ case $CC in
+ nagfor*)
+ verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+ ;;
+ *)
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+ esac
;;
freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
+ major=.$current
+ versuffix=.$current.$revision
;;
freebsd-elf)
- major=".$current"
- versuffix=".$current"
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=$major.$age.$revision
;;
irix | nonstopux)
- if test "X$lt_irix_increment" = "Xno"; then
+ if test no = "$lt_irix_increment"; then
func_arith $current - $age
else
func_arith $current - $age + 1
fi
major=$func_arith_result
case $version_type in
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
esac
- verstring="$verstring_prefix$major.$revision"
+ verstring=$verstring_prefix$major.$revision
# Add in all the interfaces that we are compatible with.
loop=$revision
- while test "$loop" -ne 0; do
+ while test 0 -ne "$loop"; do
func_arith $revision - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
- verstring="$verstring_prefix$major.$iface:$verstring"
+ verstring=$verstring_prefix$major.$iface:$verstring
done
- # Before this point, $major must not contain `.'.
+ # Before this point, $major must not contain '.'.
major=.$major
- versuffix="$major.$revision"
+ versuffix=$major.$revision
;;
linux) # correct to gnu/linux during the next big refactor
func_arith $current - $age
major=.$func_arith_result
- versuffix="$major.$age.$revision"
+ versuffix=$major.$age.$revision
;;
osf)
func_arith $current - $age
major=.$func_arith_result
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
+ versuffix=.$current.$age.$revision
+ verstring=$current.$age.$revision
# Add in all the interfaces that we are compatible with.
loop=$age
- while test "$loop" -ne 0; do
+ while test 0 -ne "$loop"; do
func_arith $current - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
- verstring="$verstring:${iface}.0"
+ verstring=$verstring:$iface.0
done
# Make executables depend on our current version.
- func_append verstring ":${current}.0"
+ func_append verstring ":$current.0"
;;
qnx)
- major=".$current"
- versuffix=".$current"
+ major=.$current
+ versuffix=.$current
+ ;;
+
+ sco)
+ major=.$current
+ versuffix=.$current
;;
sunos)
- major=".$current"
- versuffix=".$current.$revision"
+ major=.$current
+ versuffix=.$current.$revision
;;
windows)
# Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
+ # extension on DOS 8.3 file systems.
func_arith $current - $age
major=$func_arith_result
- versuffix="-$major"
+ versuffix=-$major
;;
*)
- func_fatal_configuration "unknown library version type \`$version_type'"
+ func_fatal_configuration "unknown library version type '$version_type'"
;;
esac
# Clear the version info if we defaulted, and they specified a release.
if test -z "$vinfo" && test -n "$release"; then
major=
case $version_type in
darwin)
# we can't check for "0.0" in archive_cmds due to quoting
# problems, so we reset it completely
verstring=
;;
*)
- verstring="0.0"
+ verstring=0.0
;;
esac
- if test "$need_version" = no; then
+ if test no = "$need_version"; then
versuffix=
else
- versuffix=".0.0"
+ versuffix=.0.0
fi
fi
# Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
+ if test yes,no = "$avoid_version,$need_version"; then
major=
versuffix=
- verstring=""
+ verstring=
fi
# Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- func_warning "undefined symbols not allowed in $host shared libraries"
- build_libtool_libs=no
- build_old_libs=yes
+ if test yes = "$allow_undefined"; then
+ if test unsupported = "$allow_undefined_flag"; then
+ if test yes = "$build_old_libs"; then
+ func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+ build_libtool_libs=no
+ else
+ func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+ fi
fi
else
# Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
+ allow_undefined_flag=$no_undefined_flag
fi
fi
- func_generate_dlsyms "$libname" "$libname" "yes"
+ func_generate_dlsyms "$libname" "$libname" :
func_append libobjs " $symfileobj"
- test "X$libobjs" = "X " && libobjs=
+ test " " = "$libobjs" && libobjs=
- if test "$opt_mode" != relink; then
+ if test relink != "$opt_mode"; then
# Remove our outputs, but don't remove object files since they
# may have been created when compiling PIC objects.
removelist=
tempremovelist=`$ECHO "$output_objdir/*"`
for p in $tempremovelist; do
case $p in
*.$objext | *.gcno)
;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+ if test -n "$precious_files_regex"; then
if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
then
continue
fi
fi
func_append removelist " $p"
;;
*) ;;
esac
done
test -n "$removelist" && \
func_show_eval "${RM}r \$removelist"
fi
# Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
func_append oldlibs " $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
- oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
fi
# Eliminate all temporary directories.
#for path in $notinst_path; do
# lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
# deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
# dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
#done
@@ -7587,42 +9079,42 @@ func_mode_link ()
for libdir in $xrpath; do
func_replace_sysroot "$libdir"
func_append temp_xrpath " -R$func_replace_sysroot_result"
case "$finalize_rpath " in
*" $libdir "*) ;;
*) func_append finalize_rpath " $libdir" ;;
esac
done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
dependency_libs="$temp_xrpath $dependency_libs"
fi
fi
# Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
+ old_dlfiles=$dlfiles
dlfiles=
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
*" $lib "*) ;;
*) func_append dlfiles " $lib" ;;
esac
done
# Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
+ old_dlprefiles=$dlprefiles
dlprefiles=
for lib in $old_dlprefiles; do
case "$dlprefiles " in
*" $lib "*) ;;
*) func_append dlprefiles " $lib" ;;
esac
done
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
if test -n "$rpath"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
# these systems don't actually have a c library (as such)!
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C library is in the System framework
func_append deplibs " System.ltframework"
@@ -7636,35 +9128,35 @@ func_mode_link ()
*-*-sco3.2v5* | *-*-sco5v6*)
# Causes problems with __ctype
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
;;
*)
# Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
+ if test yes = "$build_libtool_need_lc"; then
func_append deplibs " -lc"
fi
;;
esac
fi
# Transform deplibs into only deplibs that can be linked in shared.
name_save=$name
libname_save=$libname
release_save=$release
versuffix_save=$versuffix
major_save=$major
# I'm not sure if I'm treating the release correctly. I think
# release should show up in the -l (ie -lgmp5) so we don't want to
# add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
+ release=
+ versuffix=
+ major=
newdeplibs=
droppeddeps=no
case $deplibs_check_method in
pass_all)
# Don't check for shared/static. Everything works.
# This might be a little naive. We might want to check
# whether the library exists or not. But this is on
# osf3 & osf4 and I'm not really sure... Just
@@ -7683,30 +9175,30 @@ EOF
$opt_dry_run || $RM conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
ldd_output=`ldd conftest`
for i in $deplibs; do
case $i in
-l*)
func_stripname -l '' "$i"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $i "*)
func_append newdeplibs " $i"
- i=""
+ i=
;;
esac
fi
- if test -n "$i" ; then
+ if test -n "$i"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
func_append newdeplibs " $i"
else
droppeddeps=yes
echo
$ECHO "*** Warning: dynamic linker does not accept needed library $i."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which I believe you do not have"
@@ -7726,30 +9218,30 @@ EOF
for i in $deplibs; do
case $i in
-l*)
func_stripname -l '' "$i"
name=$func_stripname_result
$opt_dry_run || $RM conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $i "*)
func_append newdeplibs " $i"
- i=""
+ i=
;;
esac
fi
- if test -n "$i" ; then
+ if test -n "$i"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
func_append newdeplibs " $i"
else
droppeddeps=yes
echo
$ECHO "*** Warning: dynamic linker does not accept needed library $i."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
@@ -7776,34 +9268,34 @@ EOF
file_magic*)
set dummy $deplibs_check_method; shift
file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
for a_deplib in $deplibs; do
case $a_deplib in
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $a_deplib "*)
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
;;
esac
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
if test -n "$file_magic_glob"; then
libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
else
libnameglob=$libname
fi
- test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- if test "$want_nocaseglob" = yes; then
+ if test yes = "$want_nocaseglob"; then
shopt -s nocaseglob
potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
$nocaseglob
else
potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
fi
for potent_lib in $potential_libs; do
# Follow soft links.
@@ -7811,43 +9303,43 @@ EOF
$GREP " -> " >/dev/null; then
continue
fi
# The statement above tries to avoid entering an
# endless loop below, in case of cyclic links.
# We might still enter an endless loop, since a link
# loop can be closed while we follow links,
# but so what?
- potlib="$potent_lib"
+ potlib=$potent_lib
while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+ *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
esac
done
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
$SED -e 10q |
$EGREP "$file_magic_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
break 2
fi
done
done
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
+ if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for file magic test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
$ECHO "*** using a file magic. Last file checked: $potlib"
fi
fi
;;
*)
@@ -7860,75 +9352,75 @@ EOF
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
for a_deplib in $deplibs; do
case $a_deplib in
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $a_deplib "*)
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
;;
esac
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
+ potlib=$potent_lib # see symlink-check above in file_magic test
if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
$EGREP "$match_pattern_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
break 2
fi
done
done
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
+ if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
$ECHO "*** using a regex pattern. Last file checked: $potlib"
fi
fi
;;
*)
# Add a -L argument.
func_append newdeplibs " $a_deplib"
;;
esac
done # Gone through all deplibs.
;;
none | unknown | *)
- newdeplibs=""
+ newdeplibs=
tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ for i in $predeps $postdeps; do
# can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
done
fi
case $tmp_deplibs in
*[!\ \ ]*)
echo
- if test "X$deplibs_check_method" = "Xnone"; then
+ if test none = "$deplibs_check_method"; then
echo "*** Warning: inter-library dependencies are not supported in this platform."
else
echo "*** Warning: inter-library dependencies are not known to be supported."
fi
echo "*** All declared inter-library dependencies are being dropped."
droppeddeps=yes
;;
esac
@@ -7942,50 +9434,50 @@ EOF
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library with the System framework
newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
;;
esac
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
+ if test yes = "$droppeddeps"; then
+ if test yes = "$module"; then
echo
echo "*** Warning: libtool could not satisfy all declared inter-library"
$ECHO "*** dependencies of module $libname. Therefore, libtool will create"
echo "*** a static module, that should work as long as the dlopening"
echo "*** application is linked with the -dlopen flag."
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
build_libtool_libs=no
fi
else
echo "*** The inter-library dependencies that have been dropped here will be"
echo "*** automatically added whenever a program is linked with this library"
echo "*** or is declared to -dlopen it."
- if test "$allow_undefined" = no; then
+ if test no = "$allow_undefined"; then
echo
echo "*** Since this library must not contain undefined symbols,"
echo "*** because either the platform does not support them or"
echo "*** it was explicitly requested with -no-undefined,"
echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
build_libtool_libs=no
fi
fi
fi
fi
@@ -8021,43 +9513,43 @@ EOF
case " $new_libs " in
*" $deplib "*) ;;
*) func_append new_libs " $deplib" ;;
esac
;;
*) func_append new_libs " $deplib" ;;
esac
done
- deplibs="$new_libs"
+ deplibs=$new_libs
# All the library-specific variables (install_libdir is set above).
library_names=
old_library=
dlname=
# Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- # Remove ${wl} instances when linking with ld.
+ if test yes = "$build_libtool_libs"; then
+ # Remove $wl instances when linking with ld.
# FIXME: should test the right _cmds variable.
case $archive_cmds in
*\$LD\ *) wl= ;;
esac
- if test "$hardcode_into_libs" = yes; then
+ if test yes = "$hardcode_into_libs"; then
# Hardcode the library paths
hardcode_libdirs=
dep_rpath=
- rpath="$finalize_rpath"
- test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ rpath=$finalize_rpath
+ test relink = "$opt_mode" || rpath=$compile_rpath$rpath
for libdir in $rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
func_replace_sysroot "$libdir"
libdir=$func_replace_sysroot_result
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
@@ -8072,126 +9564,126 @@ EOF
*" $libdir "*) ;;
*) func_append perm_rpath " $libdir" ;;
esac
fi
done
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
fi
if test -n "$runpath_var" && test -n "$perm_rpath"; then
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
func_append rpath "$dir:"
done
eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
fi
test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
fi
- shlibpath="$finalize_shlibpath"
- test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ shlibpath=$finalize_shlibpath
+ test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
if test -n "$shlibpath"; then
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
fi
# Get the real and link names of the library.
eval shared_ext=\"$shrext_cmds\"
eval library_names=\"$library_names_spec\"
set dummy $library_names
shift
- realname="$1"
+ realname=$1
shift
if test -n "$soname_spec"; then
eval soname=\"$soname_spec\"
else
- soname="$realname"
+ soname=$realname
fi
if test -z "$dlname"; then
dlname=$soname
fi
- lib="$output_objdir/$realname"
+ lib=$output_objdir/$realname
linknames=
for link
do
func_append linknames " $link"
done
# Use standard objects if they are pic
test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
test "X$libobjs" = "X " && libobjs=
delfiles=
if test -n "$export_symbols" && test -n "$include_expsyms"; then
$opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
- export_symbols="$output_objdir/$libname.uexp"
+ export_symbols=$output_objdir/$libname.uexp
func_append delfiles " $export_symbols"
fi
orig_export_symbols=
case $host_os in
cygwin* | mingw* | cegcc*)
if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
# exporting using user supplied symfile
- if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ func_dll_def_p "$export_symbols" || {
# and it's NOT already a .def file. Must figure out
# which of the given symbols are data symbols and tag
# them as such. So, trigger use of export_symbols_cmds.
# export_symbols gets reassigned inside the "prepare
# the list of exported symbols" if statement, so the
# include_expsyms logic still works.
- orig_export_symbols="$export_symbols"
+ orig_export_symbols=$export_symbols
export_symbols=
always_export_symbols=yes
- fi
+ }
fi
;;
esac
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
+ if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd1 in $cmds; do
- IFS="$save_ifs"
+ IFS=$save_ifs
# Take the normal branch if the nm_file_list_spec branch
# doesn't work or if tool conversion is not needed.
case $nm_file_list_spec~$to_tool_file_cmd in
*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
try_normal_branch=yes
eval cmd=\"$cmd1\"
func_len " $cmd"
len=$func_len_result
;;
*)
try_normal_branch=no
;;
esac
- if test "$try_normal_branch" = yes \
+ if test yes = "$try_normal_branch" \
&& { test "$len" -lt "$max_cmd_len" \
|| test "$max_cmd_len" -le -1; }
then
func_show_eval "$cmd" 'exit $?'
skipped_export=false
elif test -n "$nm_file_list_spec"; then
func_basename "$output"
output_la=$func_basename_result
save_libobjs=$libobjs
save_output=$output
- output=${output_objdir}/${output_la}.nm
+ output=$output_objdir/$output_la.nm
func_to_tool_file "$output"
libobjs=$nm_file_list_spec$func_to_tool_file_result
func_append delfiles " $output"
func_verbose "creating $NM input file list: $output"
for obj in $save_libobjs; do
func_to_tool_file "$obj"
$ECHO "$func_to_tool_file_result"
done > "$output"
@@ -8204,35 +9696,35 @@ EOF
# The command line is too long to execute in one step.
func_verbose "using reloadable object file for export list..."
skipped_export=:
# Break out early, otherwise skipped_export may be
# set to false by a later but shorter cmd.
break
fi
done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ IFS=$save_ifs
+ if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
fi
fi
fi
if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
- if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
+ # 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
func_append delfiles " $export_symbols $output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
@@ -8241,52 +9733,52 @@ EOF
for test_deplib in $deplibs; do
case " $convenience " in
*" $test_deplib "*) ;;
*)
func_append tmp_deplibs " $test_deplib"
;;
esac
done
- deplibs="$tmp_deplibs"
+ deplibs=$tmp_deplibs
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec" &&
- test "$compiler_needs_object" = yes &&
+ test yes = "$compiler_needs_object" &&
test -z "$libobjs"; then
# extract the archives, so we have objects to list.
# TODO: could optimize this to just extract one archive.
whole_archive_flag_spec=
fi
if test -n "$whole_archive_flag_spec"; then
save_libobjs=$libobjs
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
test "X$libobjs" = "X " && libobjs=
else
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
func_append libobjs " $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
fi
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
func_append linker_flags " $flag"
fi
# Make a backup of the uninstalled library when relinking
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
fi
# Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
+ if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
eval test_cmds=\"$module_expsym_cmds\"
cmds=$module_expsym_cmds
else
eval test_cmds=\"$module_cmds\"
cmds=$module_cmds
fi
else
@@ -8294,17 +9786,17 @@ EOF
eval test_cmds=\"$archive_expsym_cmds\"
cmds=$archive_expsym_cmds
else
eval test_cmds=\"$archive_cmds\"
cmds=$archive_cmds
fi
fi
- if test "X$skipped_export" != "X:" &&
+ if test : != "$skipped_export" &&
func_len " $test_cmds" &&
len=$func_len_result &&
test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
# The command line is too long to link in one step, link piecewise
# or, if using GNU ld and skipped_export is not :, use a linker
# script.
@@ -8327,184 +9819,184 @@ EOF
# Clear the reloadable object creation command queue and
# initialize k to one.
test_cmds=
concat_cmds=
objlist=
last_robj=
k=1
- if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
- output=${output_objdir}/${output_la}.lnkscript
+ if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+ output=$output_objdir/$output_la.lnkscript
func_verbose "creating GNU ld script: $output"
echo 'INPUT (' > $output
for obj in $save_libobjs
do
func_to_tool_file "$obj"
$ECHO "$func_to_tool_file_result" >> $output
done
echo ')' >> $output
func_append delfiles " $output"
func_to_tool_file "$output"
output=$func_to_tool_file_result
- elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
- output=${output_objdir}/${output_la}.lnk
+ elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+ output=$output_objdir/$output_la.lnk
func_verbose "creating linker input file list: $output"
: > $output
set x $save_libobjs
shift
firstobj=
- if test "$compiler_needs_object" = yes; then
+ if test yes = "$compiler_needs_object"; then
firstobj="$1 "
shift
fi
for obj
do
func_to_tool_file "$obj"
$ECHO "$func_to_tool_file_result" >> $output
done
func_append delfiles " $output"
func_to_tool_file "$output"
output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
else
if test -n "$save_libobjs"; then
func_verbose "creating reloadable object files..."
- output=$output_objdir/$output_la-${k}.$objext
+ output=$output_objdir/$output_la-$k.$objext
eval test_cmds=\"$reload_cmds\"
func_len " $test_cmds"
len0=$func_len_result
len=$len0
# Loop over the list of objects to be linked.
for obj in $save_libobjs
do
func_len " $obj"
func_arith $len + $func_len_result
len=$func_arith_result
- if test "X$objlist" = X ||
+ if test -z "$objlist" ||
test "$len" -lt "$max_cmd_len"; then
func_append objlist " $obj"
else
# The command $test_cmds is almost too long, add a
# command to the queue.
- if test "$k" -eq 1 ; then
+ if test 1 -eq "$k"; then
# The first file doesn't have a previous command to add.
reload_objs=$objlist
eval concat_cmds=\"$reload_cmds\"
else
# All subsequent reloadable object files will link in
# the last one created.
reload_objs="$objlist $last_robj"
eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
fi
- last_robj=$output_objdir/$output_la-${k}.$objext
+ last_robj=$output_objdir/$output_la-$k.$objext
func_arith $k + 1
k=$func_arith_result
- output=$output_objdir/$output_la-${k}.$objext
+ output=$output_objdir/$output_la-$k.$objext
objlist=" $obj"
func_len " $last_robj"
func_arith $len0 + $func_len_result
len=$func_arith_result
fi
done
# Handle the remaining objects by creating one last
# reloadable object file. All subsequent reloadable object
# files will link in the last one created.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
reload_objs="$objlist $last_robj"
- eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ eval concat_cmds=\"\$concat_cmds$reload_cmds\"
if test -n "$last_robj"; then
- eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
func_append delfiles " $output"
else
output=
fi
- if ${skipped_export-false}; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
+ ${skipped_export-false} && {
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
libobjs=$output
# Append the command to create the export file.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
if test -n "$last_robj"; then
eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
- fi
+ }
test -n "$save_libobjs" &&
func_verbose "creating a temporary reloadable object file: $output"
# Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $opt_silent || {
+ IFS=$save_ifs
+ $opt_quiet || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
$opt_dry_run || eval "$cmd" || {
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
fi
exit $lt_exit
}
done
- IFS="$save_ifs"
+ IFS=$save_ifs
if test -n "$export_symbols_regex" && ${skipped_export-false}; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
fi
fi
- if ${skipped_export-false}; then
+ ${skipped_export-false} && {
if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
if test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
+ # 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
func_append delfiles " $export_symbols $output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
- fi
+ }
libobjs=$output
# Restore the value of output.
output=$save_output
if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
test "X$libobjs" = "X " && libobjs=
fi
# Expand the library linking commands again to reset the
# value of $libobjs for piecewise linking.
# Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
+ if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
cmds=$module_expsym_cmds
else
cmds=$module_cmds
fi
else
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
cmds=$archive_expsym_cmds
@@ -8516,49 +10008,50 @@ EOF
if test -n "$delfiles"; then
# Append the command to remove temporary files to $cmds.
eval cmds=\"\$cmds~\$RM $delfiles\"
fi
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
func_append libobjs " $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd in $cmds; do
- IFS="$save_ifs"
+ IFS=$sp$nl
eval cmd=\"$cmd\"
- $opt_silent || {
+ IFS=$save_ifs
+ $opt_quiet || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
$opt_dry_run || eval "$cmd" || {
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
fi
exit $lt_exit
}
done
- IFS="$save_ifs"
+ IFS=$save_ifs
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
if test -n "$convenience"; then
if test -z "$whole_archive_flag_spec"; then
func_show_eval '${RM}r "$gentop"'
fi
fi
@@ -8568,165 +10061,165 @@ EOF
# Create links to the real library.
for linkname in $linknames; do
if test "$realname" != "$linkname"; then
func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
fi
done
# If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
+ if test yes = "$module" || test yes = "$export_dynamic"; then
# On all known operating systems, these are identical.
- dlname="$soname"
+ dlname=$soname
fi
fi
;;
obj)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for objects"
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for objects"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ func_warning "'-l' and '-L' are ignored for objects" ;;
esac
test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for objects"
+ func_warning "'-rpath' is ignored for objects"
test -n "$xrpath" && \
- func_warning "\`-R' is ignored for objects"
+ func_warning "'-R' is ignored for objects"
test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for objects"
+ func_warning "'-version-info' is ignored for objects"
test -n "$release" && \
- func_warning "\`-release' is ignored for objects"
+ func_warning "'-release' is ignored for objects"
case $output in
*.lo)
test -n "$objs$old_deplibs" && \
- func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+ func_fatal_error "cannot build library object '$output' from non-libtool objects"
libobj=$output
func_lo2o "$libobj"
obj=$func_lo2o_result
;;
*)
libobj=
- obj="$output"
+ obj=$output
;;
esac
# Delete the old objects.
$opt_dry_run || $RM $obj $libobj
# Objects from convenience libraries. This assumes
# single-version convenience libraries. Whenever we create
# different ones for PIC/non-PIC, this we'll have to duplicate
# the extraction.
reload_conv_objs=
gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec and hope we can get by with
- # turning comma into space..
- wl=
-
+ # if reload_cmds runs $LD directly, get rid of -Wl from
+ # whole_archive_flag_spec and hope we can get by with turning comma
+ # into space.
+ case $reload_cmds in
+ *\$LD[\ \$]*) wl= ;;
+ esac
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
else
- gentop="$output_objdir/${obj}x"
+ gentop=$output_objdir/${obj}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
reload_conv_objs="$reload_objs $func_extract_archives_result"
fi
fi
# If we're not building shared, we need to use non_pic_objs
- test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+ test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
# Create the old-style object.
- reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+ reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
- output="$obj"
+ output=$obj
func_execute_cmds "$reload_cmds" 'exit $?'
# Exit if we aren't doing a library object file.
if test -z "$libobj"; then
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
exit $EXIT_SUCCESS
fi
- if test "$build_libtool_libs" != yes; then
+ test yes = "$build_libtool_libs" || {
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
# Create an invalid libtool object if no PIC, so that we don't
# accidentally link it into a program.
# $show "echo timestamp > $libobj"
# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
exit $EXIT_SUCCESS
- fi
+ }
- if test -n "$pic_flag" || test "$pic_mode" != default; then
+ if test -n "$pic_flag" || test default != "$pic_mode"; then
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
+ output=$libobj
func_execute_cmds "$reload_cmds" 'exit $?'
fi
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
exit $EXIT_SUCCESS
;;
prog)
case $host in
*cygwin*) func_stripname '' '.exe' "$output"
output=$func_stripname_result.exe;;
esac
test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for programs"
+ func_warning "'-version-info' is ignored for programs"
test -n "$release" && \
- func_warning "\`-release' is ignored for programs"
+ func_warning "'-release' is ignored for programs"
- test "$preload" = yes \
- && test "$dlopen_support" = unknown \
- && test "$dlopen_self" = unknown \
- && test "$dlopen_self_static" = unknown && \
- func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+ $preload \
+ && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+ && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library is the System framework
compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
;;
esac
case $host in
*-*-darwin*)
# Don't allow lazy linking, it breaks C++ global constructors
# But is supposedly fixed on 10.4 or later (yay!).
- if test "$tagname" = CXX ; then
+ if test CXX = "$tagname"; then
case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
10.[0123])
- func_append compile_command " ${wl}-bind_at_load"
- func_append finalize_command " ${wl}-bind_at_load"
+ func_append compile_command " $wl-bind_at_load"
+ func_append finalize_command " $wl-bind_at_load"
;;
esac
fi
# Time to change all our "foo.ltframework" stuff back to "-framework foo"
compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
;;
esac
@@ -8752,17 +10245,17 @@ EOF
case " $new_libs " in
*" $deplib "*) ;;
*) func_append new_libs " $deplib" ;;
esac
;;
*) func_append new_libs " $deplib" ;;
esac
done
- compile_deplibs="$new_libs"
+ compile_deplibs=$new_libs
func_append compile_command " $compile_deplibs"
func_append finalize_command " $finalize_deplibs"
if test -n "$rpath$xrpath"; then
# If the user specified any rpath flags, then add them.
for libdir in $rpath $xrpath; do
@@ -8776,17 +10269,17 @@ EOF
# Now hardcode the library paths
rpath=
hardcode_libdirs=
for libdir in $compile_rpath $finalize_rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
@@ -8799,45 +10292,45 @@ EOF
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
*) func_append perm_rpath " $libdir" ;;
esac
fi
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
::) dllsearchpath=$libdir;;
*) func_append dllsearchpath ":$libdir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
::) dllsearchpath=$testbindir;;
*) func_append dllsearchpath ":$testbindir";;
esac
;;
esac
done
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
- compile_rpath="$rpath"
+ compile_rpath=$rpath
rpath=
hardcode_libdirs=
for libdir in $finalize_rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
;;
@@ -8852,73 +10345,71 @@ EOF
*" $libdir "*) ;;
*) func_append finalize_perm_rpath " $libdir" ;;
esac
fi
done
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
- finalize_rpath="$rpath"
+ finalize_rpath=$rpath
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ if test -n "$libobjs" && test yes = "$build_old_libs"; then
# Transform all the library objects into standard objects.
compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
fi
- func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+ func_generate_dlsyms "$outputname" "@PROGRAM@" false
# template prelinking step
if test -n "$prelink_cmds"; then
func_execute_cmds "$prelink_cmds" 'exit $?'
fi
- wrappers_required=yes
+ wrappers_required=:
case $host in
*cegcc* | *mingw32ce*)
# Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
- wrappers_required=no
+ wrappers_required=false
;;
*cygwin* | *mingw* )
- if test "$build_libtool_libs" != yes; then
- wrappers_required=no
- fi
+ test yes = "$build_libtool_libs" || wrappers_required=false
;;
*)
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- wrappers_required=no
+ if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+ wrappers_required=false
fi
;;
esac
- if test "$wrappers_required" = no; then
+ $wrappers_required || {
# Replace the output file specification.
compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
+ link_command=$compile_command$compile_rpath
# We have no uninstalled library dependencies, so finalize right now.
exit_status=0
func_show_eval "$link_command" 'exit_status=$?'
if test -n "$postlink_cmds"; then
func_to_tool_file "$output"
postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
func_execute_cmds "$postlink_cmds" 'exit $?'
fi
# Delete the generated files.
- if test -f "$output_objdir/${outputname}S.${objext}"; then
- func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ if test -f "$output_objdir/${outputname}S.$objext"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
fi
exit $exit_status
- fi
+ }
if test -n "$compile_shlibpath$finalize_shlibpath"; then
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
fi
if test -n "$finalize_shlibpath"; then
finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
fi
@@ -8938,56 +10429,57 @@ EOF
rpath=
for dir in $finalize_perm_rpath; do
func_append rpath "$dir:"
done
finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
fi
- if test "$no_install" = yes; then
+ if test yes = "$no_install"; then
# We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
+ link_command=$compile_var$compile_command$compile_rpath
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
# Delete the old output file.
$opt_dry_run || $RM $output
# Link the executable and exit
func_show_eval "$link_command" 'exit $?'
if test -n "$postlink_cmds"; then
func_to_tool_file "$output"
postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
func_execute_cmds "$postlink_cmds" 'exit $?'
fi
exit $EXIT_SUCCESS
fi
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
-
- func_warning "this platform does not like uninstalled shared libraries"
- func_warning "\`$output' will be relinked during installation"
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
+ case $hardcode_action,$fast_install in
+ relink,*)
+ # Fast installation is not supported
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
+
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "'$output' will be relinked during installation"
+ ;;
+ *,yes)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ ;;
+ *,no)
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
+ ;;
+ *,needless)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=
+ ;;
+ esac
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
# Delete the old output files.
$opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
func_show_eval "$link_command" 'exit $?'
@@ -9034,18 +10526,18 @@ EOF
outputname=$func_stripname_result ;;
*) exeext= ;;
esac
case $host in
*cygwin* | *mingw* )
func_dirname_and_basename "$output" "" "."
output_name=$func_basename_result
output_path=$func_dirname_result
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
+ cwrappersource=$output_path/$objdir/lt-$output_name.c
+ cwrapper=$output_path/$output_name.exe
$RM $cwrappersource $cwrapper
trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
func_emit_cwrapperexe_src > $cwrappersource
# The wrapper executable is built using the $host compiler,
# because it contains $host paths and files. If cross-
# compiling, it, like the target executable, must be
@@ -9056,17 +10548,17 @@ EOF
}
# Now, create the wrapper script for func_source use:
func_ltwrapper_scriptname $cwrapper
$RM $func_ltwrapper_scriptname_result
trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
$opt_dry_run || {
# note: this script will not be executed, so do not chmod.
- if test "x$build" = "x$host" ; then
+ if test "x$build" = "x$host"; then
$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
else
func_emit_wrapper no > $func_ltwrapper_scriptname_result
fi
}
;;
* )
$RM $output
@@ -9079,49 +10571,51 @@ EOF
}
exit $EXIT_SUCCESS
;;
esac
# See if we need to build an old-fashioned archive.
for oldlib in $oldlibs; do
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save $symfileobj"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
+ case $build_libtool_libs in
+ convenience)
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs=$convenience
build_libtool_libs=no
- else
+ ;;
+ module)
+ oldobjs=$libobjs_save
+ addlibs=$old_convenience
+ build_libtool_libs=no
+ ;;
+ *)
oldobjs="$old_deplibs $non_pic_objects"
- if test "$preload" = yes && test -f "$symfileobj"; then
- func_append oldobjs " $symfileobj"
- fi
- fi
- addlibs="$old_convenience"
- fi
+ $preload && test -f "$symfileobj" \
+ && func_append oldobjs " $symfileobj"
+ addlibs=$old_convenience
+ ;;
+ esac
if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $addlibs
func_append oldobjs " $func_extract_archives_result"
fi
# Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
cmds=$old_archive_from_new_cmds
else
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
func_append oldobjs " $func_extract_archives_result"
fi
# POSIX demands no paths to be encoded in archives. We have
# to avoid creating archives with duplicate basenames if we
@@ -9132,26 +10626,26 @@ EOF
if (for obj in $oldobjs
do
func_basename "$obj"
$ECHO "$func_basename_result"
done | sort | sort -uc >/dev/null 2>&1); then
:
else
echo "copying selected object files to avoid basename conflicts..."
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_mkdir_p "$gentop"
save_oldobjs=$oldobjs
oldobjs=
counter=1
for obj in $save_oldobjs
do
func_basename "$obj"
- objbase="$func_basename_result"
+ objbase=$func_basename_result
case " $oldobjs " in
" ") oldobjs=$obj ;;
*[\ /]"$objbase "*)
while :; do
# Make sure we don't pick an alternate name that also
# overlaps.
newobj=lt$counter-$objbase
func_arith $counter + 1
@@ -9210,195 +10704,194 @@ EOF
func_arith $len + $func_len_result
len=$func_arith_result
func_append objlist " $obj"
if test "$len" -lt "$max_cmd_len"; then
:
else
# the above command should be used before it gets too long
oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
+ if test "$obj" = "$last_oldobj"; then
RANLIB=$save_RANLIB
fi
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
objlist=
len=$len0
fi
done
RANLIB=$save_RANLIB
oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
+ if test -z "$oldobjs"; then
eval cmds=\"\$concat_cmds\"
else
eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
fi
fi
fi
func_execute_cmds "$cmds" 'exit $?'
done
test -n "$generated" && \
func_show_eval "${RM}r$generated"
# Now create the libtool archive.
case $output in
*.la)
old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
+ test yes = "$build_old_libs" && old_library=$libname.$libext
func_verbose "creating $output"
# Preserve any variables that may affect compiler behavior
for var in $variables_saved_for_relink; do
if eval test -z \"\${$var+set}\"; then
relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
elif eval var_value=\$$var; test -z "$var_value"; then
relink_command="$var=; export $var; $relink_command"
else
func_quote_for_eval "$var_value"
relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
fi
done
# Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
- if test "$hardcode_automatic" = yes ; then
+ if test yes = "$hardcode_automatic"; then
relink_command=
fi
# Only create the output if not a dry run.
$opt_dry_run || {
for installed in no yes; do
- if test "$installed" = yes; then
+ if test yes = "$installed"; then
if test -z "$install_libdir"; then
break
fi
- output="$output_objdir/$outputname"i
+ output=$output_objdir/${outputname}i
# Replace all uninstalled libtool libraries with the installed ones
newdependency_libs=
for deplib in $dependency_libs; do
case $deplib in
*.la)
func_basename "$deplib"
- name="$func_basename_result"
+ name=$func_basename_result
func_resolve_sysroot "$deplib"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_fatal_error "'$deplib' is not a valid libtool archive"
func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
;;
-L*)
func_stripname -L '' "$deplib"
func_replace_sysroot "$func_stripname_result"
func_append newdependency_libs " -L$func_replace_sysroot_result"
;;
-R*)
func_stripname -R '' "$deplib"
func_replace_sysroot "$func_stripname_result"
func_append newdependency_libs " -R$func_replace_sysroot_result"
;;
*) func_append newdependency_libs " $deplib" ;;
esac
done
- dependency_libs="$newdependency_libs"
+ dependency_libs=$newdependency_libs
newdlfiles=
for lib in $dlfiles; do
case $lib in
*.la)
func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
;;
*) func_append newdlfiles " $lib" ;;
esac
done
- dlfiles="$newdlfiles"
+ dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
*.la)
# Only pass preopened files to the pseudo-archive (for
# eventual linking with the app. that links it) if we
# didn't already link the preopened objects directly into
# the library:
func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
;;
esac
done
- dlprefiles="$newdlprefiles"
+ dlprefiles=$newdlprefiles
else
newdlfiles=
for lib in $dlfiles; do
case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlfiles " $abs"
done
- dlfiles="$newdlfiles"
+ dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlprefiles " $abs"
done
- dlprefiles="$newdlprefiles"
+ dlprefiles=$newdlprefiles
fi
$RM $output
# place dlname in correct position for cygwin
# In fact, it would be nice if we could use this code for all target
# systems that can't hard-code library paths into their executables
# and that have no shared library path variable independent of PATH,
# but it turns out we can't easily determine that from inspecting
# libtool variables, so we have to hard-code the OSs to which it
# applies here; at the moment, that means platforms that use the PE
# object format with DLL files. See the long comment at the top of
# tests/bindir.at for full details.
tdlname=$dlname
case $host,$output,$installed,$module,$dlname in
*cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
# If a -bindir argument was supplied, place the dll there.
- if test "x$bindir" != x ;
- then
+ if test -n "$bindir"; then
func_relative_path "$install_libdir" "$bindir"
- tdlname=$func_relative_path_result$dlname
+ tdlname=$func_relative_path_result/$dlname
else
# Otherwise fall back on heuristic.
tdlname=../bin/$dlname
fi
;;
esac
$ECHO > $output "\
# $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
# The name that we can dlopen(3).
dlname='$tdlname'
# Names of this library.
library_names='$library_names'
# The name of the static archive.
old_library='$old_library'
-# Linker flags that can not go in dependency_libs.
+# Linker flags that cannot go in dependency_libs.
inherited_linker_flags='$new_inherited_linker_flags'
# Libraries that this one depends upon.
dependency_libs='$dependency_libs'
# Names of additional weak libraries provided by this library
weak_library_names='$weak_libs'
@@ -9414,155 +10907,155 @@ installed=$installed
shouldnotlink=$module
# Files to dlopen/dlpreopen
dlopen='$dlfiles'
dlpreopen='$dlprefiles'
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
+ if test no,yes = "$installed,$need_relink"; then
$ECHO >> $output "\
relink_command=\"$relink_command\""
fi
done
}
# Do a symbolic link so that the libtool archive can be found in
# LD_LIBRARY_PATH before the program is installed.
func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
;;
esac
exit $EXIT_SUCCESS
}
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
- func_mode_link ${1+"$@"}
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+ func_mode_link ${1+"$@"}
+fi
# func_mode_uninstall arg...
func_mode_uninstall ()
{
- $opt_debug
- RM="$nonopt"
+ $debug_cmd
+
+ RM=$nonopt
files=
- rmforce=
+ rmforce=false
exit_status=0
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
- libtool_install_magic="$magic"
+ libtool_install_magic=$magic
for arg
do
case $arg in
- -f) func_append RM " $arg"; rmforce=yes ;;
+ -f) func_append RM " $arg"; rmforce=: ;;
-*) func_append RM " $arg" ;;
*) func_append files " $arg" ;;
esac
done
test -z "$RM" && \
func_fatal_help "you must specify an RM program"
rmdirs=
for file in $files; do
func_dirname "$file" "" "."
- dir="$func_dirname_result"
- if test "X$dir" = X.; then
- odir="$objdir"
+ dir=$func_dirname_result
+ if test . = "$dir"; then
+ odir=$objdir
else
- odir="$dir/$objdir"
+ odir=$dir/$objdir
fi
func_basename "$file"
- name="$func_basename_result"
- test "$opt_mode" = uninstall && odir="$dir"
+ name=$func_basename_result
+ test uninstall = "$opt_mode" && odir=$dir
# Remember odir for removal later, being careful to avoid duplicates
- if test "$opt_mode" = clean; then
+ if test clean = "$opt_mode"; then
case " $rmdirs " in
*" $odir "*) ;;
*) func_append rmdirs " $odir" ;;
esac
fi
# Don't error if the file doesn't exist and rm -f was used.
if { test -L "$file"; } >/dev/null 2>&1 ||
{ test -h "$file"; } >/dev/null 2>&1 ||
test -f "$file"; then
:
elif test -d "$file"; then
exit_status=1
continue
- elif test "$rmforce" = yes; then
+ elif $rmforce; then
continue
fi
- rmfiles="$file"
+ rmfiles=$file
case $name in
*.la)
# Possibly a libtool archive, so verify it.
if func_lalib_p "$file"; then
func_source $dir/$name
# Delete the libtool libraries and symlinks.
for n in $library_names; do
func_append rmfiles " $odir/$n"
done
test -n "$old_library" && func_append rmfiles " $odir/$old_library"
- case "$opt_mode" in
+ case $opt_mode in
clean)
case " $library_names " in
*" $dlname "*) ;;
*) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
esac
test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
;;
uninstall)
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
- func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
fi
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
- func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
fi
# FIXME: should reinstall the best remaining shared library.
;;
esac
fi
;;
*.lo)
# Possibly a libtool object, so verify it.
if func_lalib_p "$file"; then
# Read the .lo file
func_source $dir/$name
# Add PIC object to the list of files to remove.
- if test -n "$pic_object" &&
- test "$pic_object" != none; then
+ if test -n "$pic_object" && test none != "$pic_object"; then
func_append rmfiles " $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" &&
- test "$non_pic_object" != none; then
+ if test -n "$non_pic_object" && test none != "$non_pic_object"; then
func_append rmfiles " $dir/$non_pic_object"
fi
fi
;;
*)
- if test "$opt_mode" = clean ; then
+ if test clean = "$opt_mode"; then
noexename=$name
case $file in
*.exe)
func_stripname '' '.exe' "$file"
file=$func_stripname_result
func_stripname '' '.exe' "$name"
noexename=$func_stripname_result
# $file with .exe has already been added to rmfiles,
@@ -9579,61 +11072,62 @@ func_mode_uninstall ()
func_append rmfiles " $func_ltwrapper_scriptname_result"
else
relink_command=
func_source $dir/$noexename
fi
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
- func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
+ func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+ if test yes = "$fast_install" && test -n "$relink_command"; then
func_append rmfiles " $odir/lt-$name"
fi
- if test "X$noexename" != "X$name" ; then
- func_append rmfiles " $odir/lt-${noexename}.c"
+ if test "X$noexename" != "X$name"; then
+ func_append rmfiles " $odir/lt-$noexename.c"
fi
fi
fi
;;
esac
func_show_eval "$RM $rmfiles" 'exit_status=1'
done
- # Try to remove the ${objdir}s in the directories where we deleted files
+ # Try to remove the $objdir's in the directories where we deleted files
for dir in $rmdirs; do
if test -d "$dir"; then
func_show_eval "rmdir $dir >/dev/null 2>&1"
fi
done
exit $exit_status
}
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
- func_mode_uninstall ${1+"$@"}
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+ func_mode_uninstall ${1+"$@"}
+fi
test -z "$opt_mode" && {
- help="$generic_help"
+ help=$generic_help
func_fatal_help "you must specify a MODE"
}
test -z "$exec_cmd" && \
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode '$opt_mode'"
if test -n "$exec_cmd"; then
eval exec "$exec_cmd"
exit $EXIT_FAILURE
fi
exit $exit_status
# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
+# where we disable both kinds of libraries. Given conflicting
# choices, we go for a static library, that is the most portable,
# since we can't tell whether shared libraries were disabled because
# the user asked for that or because the platform doesn't support
# them. This is particularly important on AIX, because we don't
# support having both static and shared libraries enabled at the same
# time on that platform, so we default to a shared-only configuration.
# If a disable-shared tag is given, we'll fallback to a static-only
# configuration. But we'll never go from static-only to shared-only.
@@ -9646,10 +11140,8 @@ build_old_libs=yes
# ### BEGIN LIBTOOL TAG CONFIG: disable-static
build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
# ### END LIBTOOL TAG CONFIG: disable-static
# Local Variables:
# mode:shell-script
# sh-indentation:2
# End:
-# vi:sw=2
-
diff --git libpng-1.2.53rc02/Makefile.in ag/Makefile.in
--- libpng-1.2.53rc02/Makefile.in 2015-02-21 13:47:17.000000000 -0600
+++ ag/Makefile.in 2015-02-21 13:51:09.070922332 -0600
@@ -1,12 +1,12 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
+# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
@@ -23,17 +23,27 @@
# and change to the new one (libpng14), then change the
# -version-number settings below so that the new values have
# the correct major part (first field).
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
@@ -89,28 +99,22 @@ NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
check_PROGRAMS = pngtest$(EXEEXT)
@HAVE_LD_VERSION_SCRIPT_TRUE@am__append_1 = -Wl,--version-script=libpng.vers
@HAVE_LD_VERSION_SCRIPT_FALSE@am__append_2 = -export-symbols libpng.sym
subdir = .
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/configure $(am__configure_deps) \
- $(srcdir)/config.h.in mkinstalldirs \
- $(top_srcdir)/scripts/libpng.pc-configure.in \
- $(top_srcdir)/scripts/libpng-config.in depcomp \
- $(dist_man_MANS) $(pkginclude_HEADERS) test-driver INSTALL \
- README TODO compile config.guess config.sub install-sh missing \
- ltmain.sh
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(pkginclude_HEADERS) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = libpng.pc libpng-config
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
@@ -419,16 +423,21 @@ am__set_b = \
b='$*';; \
esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.test.log=.log)
TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
$(TEST_LOG_FLAGS)
+am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \
+ $(srcdir)/config.h.in $(top_srcdir)/scripts/libpng-config.in \
+ $(top_srcdir)/scripts/libpng.pc-configure.in INSTALL README \
+ TODO compile config.guess config.sub depcomp install-sh \
+ ltmain.sh missing mkinstalldirs test-driver
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
@@ -481,16 +490,17 @@ LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBPNG_DEFINES = @LIBPNG_DEFINES@
LIBPNG_NO_MMX = @LIBPNG_NO_MMX@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
@@ -660,17 +670,16 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
@@ -1283,17 +1292,17 @@ $(TEST_SUITE_LOG): $(TEST_LOGS)
redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
if $(am__make_dryrun); then :; else \
rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
fi; \
fi; \
if test -n "$$am__remaking_logs"; then \
echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
"recursion detected" >&2; \
- else \
+ elif test -n "$$redo_logs"; then \
am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
fi; \
if $(am__make_dryrun); then :; else \
st=0; \
errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
for i in $$redo_bases; do \
test -f $$i.trs && test -r $$i.trs \
|| { echo "$$errmsg $$i.trs" >&2; st=1; }; \
@@ -1472,25 +1481,25 @@ dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-tarZ: distdir
- @echo WARNING: "Support for shar distribution archives is" \
- "deprecated." >&2
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
- @echo WARNING: "Support for distribution archives compressed with" \
- "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
@@ -1516,27 +1525,27 @@ distcheck: dist
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
- mkdir $(distdir)/_build $(distdir)/_inst
+ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure \
+ && $(am__cd) $(distdir)/_build/sub \
+ && ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
- --srcdir=.. --prefix="$$dc_install_base" \
+ --srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
@@ -1733,16 +1742,18 @@ uninstall-man: uninstall-man3 uninstall-
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
pdf pdf-am ps ps-am recheck tags tags-am uninstall \
uninstall-am uninstall-binSCRIPTS uninstall-hook \
uninstall-libLTLIBRARIES uninstall-man uninstall-man3 \
uninstall-man5 uninstall-pkgconfigDATA \
uninstall-pkgincludeHEADERS
+.PRECIOUS: Makefile
+
@HAVE_LD_VERSION_SCRIPT_TRUE@ # Versioned symbols and restricted exports
@HAVE_LD_VERSION_SCRIPT_FALSE@ # Only restricted exports when possible
$(PNGLIB_BASENAME).pc: libpng.pc
cp libpng.pc $@
$(PNGLIB_BASENAME)-config: libpng-config
diff --git libpng-1.2.53rc02/missing ag/missing
--- libpng-1.2.53rc02/missing 2013-12-31 21:21:52.000000000 -0600
+++ ag/missing 2015-02-21 13:51:08.858119125 -0600
@@ -1,14 +1,14 @@
#! /bin/sh
# Common wrapper for a few potentially missing GNU programs.
scriptversion=2013-10-28.13; # UTC
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard , 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
diff --git libpng-1.2.53rc02/test-driver ag/test-driver
--- libpng-1.2.53rc02/test-driver 2013-12-31 21:21:52.000000000 -0600
+++ ag/test-driver 2015-02-21 13:51:09.032831272 -0600
@@ -1,14 +1,14 @@
#! /bin/sh
# test-driver - basic testsuite driver script.
scriptversion=2013-07-13.22; # UTC
-# Copyright (C) 2011-2013 Free Software Foundation, Inc.
+# Copyright (C) 2011-2014 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -101,29 +101,38 @@ do_exit='rm -f $log_file $trs_file; (exi
trap "st=129; $do_exit" 1
trap "st=130; $do_exit" 2
trap "st=141; $do_exit" 13
trap "st=143; $do_exit" 15
# Test script is run here.
"$@" >$log_file 2>&1
estatus=$?
+
if test $enable_hard_errors = no && test $estatus -eq 99; then
- estatus=1
+ tweaked_estatus=1
+else
+ tweaked_estatus=$estatus
fi
-case $estatus:$expect_failure in
+case $tweaked_estatus:$expect_failure in
0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
0:*) col=$grn res=PASS recheck=no gcopy=no;;
77:*) col=$blu res=SKIP recheck=no gcopy=yes;;
99:*) col=$mgn res=ERROR recheck=yes gcopy=yes;;
*:yes) col=$lgn res=XFAIL recheck=no gcopy=yes;;
*:*) col=$red res=FAIL recheck=yes gcopy=yes;;
esac
+# Report the test outcome and exit status in the logs, so that one can
+# know whether the test passed or failed simply by looking at the '.log'
+# file, without the need of also peaking into the corresponding '.trs'
+# file (automake bug#11814).
+echo "$res $test_name (exit status: $estatus)" >>$log_file
+
# Report outcome to console.
echo "${col}${res}${std}: $test_name"
# Register the test result, and other relevant metadata.
echo ":test-result: $res" > $trs_file
echo ":global-test-result: $res" >> $trs_file
echo ":recheck: $recheck" >> $trs_file
echo ":copy-in-global-log: $gcopy" >> $trs_file