diff --git a/ABOUT-NLS b/ABOUT-NLS new file mode 100644 index 0000000..b1de1b6 --- /dev/null +++ b/ABOUT-NLS @@ -0,0 +1,1282 @@ +1 Notes on the Free Translation Project +*************************************** + +Free software is going international! The Free Translation Project is +a way to get maintainers of free software, translators, and users all +together, so that free software will gradually become able to speak many +languages. A few packages already provide translations for their +messages. + + If you found this `ABOUT-NLS' file inside a distribution, you may +assume that the distributed package does use GNU `gettext' internally, +itself available at your nearest GNU archive site. But you do _not_ +need to install GNU `gettext' prior to configuring, installing or using +this package with messages translated. + + Installers will find here some useful hints. These notes also +explain how users should proceed for getting the programs to use the +available translations. They tell how people wanting to contribute and +work on translations can contact the appropriate team. + +1.1 INSTALL Matters +=================== + +Some packages are "localizable" when properly installed; the programs +they contain can be made to speak your own native language. Most such +packages use GNU `gettext'. Other packages have their own ways to +internationalization, predating GNU `gettext'. + + By default, this package will be installed to allow translation of +messages. It will automatically detect whether the system already +provides the GNU `gettext' functions. Installers may use special +options at configuration time for changing the default behaviour. The +command: + + ./configure --disable-nls + +will _totally_ disable translation of messages. + + When you already have GNU `gettext' installed on your system and run +configure without an option for your new package, `configure' will +probably detect the previously built and installed `libintl' library +and will decide to use it. If not, you may have to to use the +`--with-libintl-prefix' option to tell `configure' where to look for it. + + Internationalized packages usually have many `po/LL.po' files, where +LL gives an ISO 639 two-letter code identifying the language. Unless +translations have been forbidden at `configure' time by using the +`--disable-nls' switch, all available translations are installed +together with the package. However, the environment variable `LINGUAS' +may be set, prior to configuration, to limit the installed set. +`LINGUAS' should then contain a space separated list of two-letter +codes, stating which languages are allowed. + +1.2 Using This Package +====================== + +As a user, if your language has been installed for this package, you +only have to set the `LANG' environment variable to the appropriate +`LL_CC' combination. If you happen to have the `LC_ALL' or some other +`LC_xxx' environment variables set, you should unset them before +setting `LANG', otherwise the setting of `LANG' will not have the +desired effect. Here `LL' is an ISO 639 two-letter language code, and +`CC' is an ISO 3166 two-letter country code. For example, let's +suppose that you speak German and live in Germany. At the shell +prompt, merely execute `setenv LANG de_DE' (in `csh'), +`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash'). +This can be done from your `.login' or `.profile' file, once and for +all. + + You might think that the country code specification is redundant. +But in fact, some languages have dialects in different countries. For +example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The +country code serves to distinguish the dialects. + + The locale naming convention of `LL_CC', with `LL' denoting the +language and `CC' denoting the country, is the one use on systems based +on GNU libc. On other systems, some variations of this scheme are +used, such as `LL' or `LL_CC.ENCODING'. You can get the list of +locales supported by your system for your language by running the +command `locale -a | grep '^LL''. + + Not all programs have translations for all languages. By default, an +English message is shown in place of a nonexistent translation. If you +understand other languages, you can set up a priority list of languages. +This is done through a different environment variable, called +`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG' +for the purpose of message handling, but you still need to have `LANG' +set to the primary language; this is required by other parts of the +system libraries. For example, some Swedish users who would rather +read translations in German than English for when Swedish is not +available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'. + + Special advice for Norwegian users: The language code for Norwegian +bokma*l changed from `no' to `nb' recently (in 2003). During the +transition period, while some message catalogs for this language are +installed under `nb' and some older ones under `no', it's recommended +for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and +older translations are used. + + In the `LANGUAGE' environment variable, but not in the `LANG' +environment variable, `LL_CC' combinations can be abbreviated as `LL' +to denote the language's main dialect. For example, `de' is equivalent +to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT' +(Portuguese as spoken in Portugal) in this context. + +1.3 Translating Teams +===================== + +For the Free Translation Project to be a success, we need interested +people who like their own language and write it well, and who are also +able to synergize with other translators speaking the same language. +Each translation team has its own mailing list. The up-to-date list of +teams can be found at the Free Translation Project's homepage, +`http://translationproject.org/', in the "Teams" area. + + If you'd like to volunteer to _work_ at translating messages, you +should become a member of the translating team for your own language. +The subscribing address is _not_ the same as the list itself, it has +`-request' appended. For example, speakers of Swedish can send a +message to `sv-request@li.org', having this message body: + + subscribe + + Keep in mind that team members are expected to participate +_actively_ in translations, or at solving translational difficulties, +rather than merely lurking around. If your team does not exist yet and +you want to start one, or if you are unsure about what to do or how to +get started, please write to `coordinator@translationproject.org' to +reach the coordinator for all translator teams. + + The English team is special. It works at improving and uniformizing +the terminology in use. Proven linguistic skills are praised more than +programming skills, here. + +1.4 Available Packages +====================== + +Languages are not equally supported in all packages. The following +matrix shows the current state of internationalization, as of June +2010. The matrix shows, in regard of each package, for which languages +PO files have been submitted to translation coordination, with a +translation percentage of at least 50%. + + Ready PO files af am an ar as ast az be be@latin bg bn_IN bs ca + +--------------------------------------------------+ + a2ps | [] [] | + aegis | | + ant-phone | | + anubis | | + aspell | [] [] | + bash | | + bfd | | + bibshelf | [] | + binutils | | + bison | | + bison-runtime | [] | + bluez-pin | [] [] | + bombono-dvd | | + buzztard | | + cflow | | + clisp | | + coreutils | [] [] | + cpio | | + cppi | | + cpplib | [] | + cryptsetup | | + dfarc | | + dialog | [] [] | + dico | | + diffutils | [] | + dink | | + doodle | | + e2fsprogs | [] | + enscript | [] | + exif | | + fetchmail | [] | + findutils | [] | + flex | [] | + freedink | | + gas | | + gawk | [] [] | + gcal | [] | + gcc | | + gettext-examples | [] [] [] [] | + gettext-runtime | [] [] | + gettext-tools | [] [] | + gip | [] | + gjay | | + gliv | [] | + glunarclock | [] [] | + gnubiff | | + gnucash | [] | + gnuedu | | + gnulib | | + gnunet | | + gnunet-gtk | | + gnutls | | + gold | | + gpe-aerial | | + gpe-beam | | + gpe-bluetooth | | + gpe-calendar | | + gpe-clock | [] | + gpe-conf | | + gpe-contacts | | + gpe-edit | | + gpe-filemanager | | + gpe-go | | + gpe-login | | + gpe-ownerinfo | [] | + gpe-package | | + gpe-sketchbook | | + gpe-su | [] | + gpe-taskmanager | [] | + gpe-timesheet | [] | + gpe-today | [] | + gpe-todo | | + gphoto2 | | + gprof | [] | + gpsdrive | | + gramadoir | | + grep | | + grub | [] [] | + gsasl | | + gss | | + gst-plugins-bad | [] | + gst-plugins-base | [] | + gst-plugins-good | [] | + gst-plugins-ugly | [] | + gstreamer | [] [] [] | + gtick | | + gtkam | [] | + gtkorphan | [] | + gtkspell | [] [] [] | + gutenprint | | + hello | [] | + help2man | | + hylafax | | + idutils | | + indent | [] [] | + iso_15924 | | + iso_3166 | [] [] [] [] [] [] [] | + iso_3166_2 | | + iso_4217 | | + iso_639 | [] [] [] [] | + iso_639_3 | | + jwhois | | + kbd | | + keytouch | [] | + keytouch-editor | | + keytouch-keyboa... | [] | + klavaro | [] | + latrine | | + ld | [] | + leafpad | [] [] | + libc | [] [] | + libexif | () | + libextractor | | + libgnutls | | + libgpewidget | | + libgpg-error | | + libgphoto2 | | + libgphoto2_port | | + libgsasl | | + libiconv | [] | + libidn | | + lifelines | | + liferea | [] [] | + lilypond | | + linkdr | [] | + lordsawar | | + lprng | | + lynx | [] | + m4 | | + mailfromd | | + mailutils | | + make | | + man-db | | + man-db-manpages | | + minicom | | + mkisofs | | + myserver | | + nano | [] [] | + opcodes | | + parted | | + pies | | + popt | | + psmisc | | + pspp | [] | + pwdutils | | + radius | [] | + recode | [] [] | + rosegarden | | + rpm | | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] [] | + sed | [] [] | + sharutils | [] [] | + shishi | | + skencil | | + solfege | | + solfege-manual | | + soundtracker | | + sp | | + sysstat | | + tar | [] | + texinfo | | + tin | | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] | + vice | | + vmm | | + vorbis-tools | | + wastesedge | | + wdiff | | + wget | [] [] | + wyslij-po | | + xchat | [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] | + +--------------------------------------------------+ + af am an ar as ast az be be@latin bg bn_IN bs ca + 6 0 1 2 3 19 1 10 3 28 3 1 38 + + crh cs da de el en en_GB en_ZA eo es et eu fa + +-------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] | + aegis | [] [] [] | + ant-phone | [] () | + anubis | [] [] | + aspell | [] [] [] [] [] | + bash | [] [] [] | + bfd | [] | + bibshelf | [] [] [] | + binutils | [] | + bison | [] [] | + bison-runtime | [] [] [] [] | + bluez-pin | [] [] [] [] [] [] | + bombono-dvd | [] | + buzztard | [] [] [] | + cflow | [] [] | + clisp | [] [] [] [] | + coreutils | [] [] [] [] | + cpio | | + cppi | | + cpplib | [] [] [] | + cryptsetup | [] | + dfarc | [] [] [] | + dialog | [] [] [] [] [] | + dico | | + diffutils | [] [] [] [] [] [] | + dink | [] [] [] | + doodle | [] | + e2fsprogs | [] [] [] | + enscript | [] [] [] | + exif | () [] [] | + fetchmail | [] [] () [] [] [] | + findutils | [] [] [] | + flex | [] [] | + freedink | [] [] [] | + gas | [] | + gawk | [] [] [] | + gcal | [] | + gcc | [] [] | + gettext-examples | [] [] [] [] | + gettext-runtime | [] [] [] [] | + gettext-tools | [] [] [] | + gip | [] [] [] [] | + gjay | [] | + gliv | [] [] [] | + glunarclock | [] [] | + gnubiff | () | + gnucash | [] () () () () | + gnuedu | [] [] | + gnulib | [] [] | + gnunet | | + gnunet-gtk | [] | + gnutls | [] [] | + gold | [] | + gpe-aerial | [] [] [] [] | + gpe-beam | [] [] [] [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] | + gpe-clock | [] [] [] [] | + gpe-conf | [] [] [] | + gpe-contacts | [] [] [] | + gpe-edit | [] [] | + gpe-filemanager | [] [] [] | + gpe-go | [] [] [] [] | + gpe-login | [] [] | + gpe-ownerinfo | [] [] [] [] | + gpe-package | [] [] [] | + gpe-sketchbook | [] [] [] [] | + gpe-su | [] [] [] [] | + gpe-taskmanager | [] [] [] [] | + gpe-timesheet | [] [] [] [] | + gpe-today | [] [] [] [] | + gpe-todo | [] [] [] | + gphoto2 | [] [] () [] [] [] | + gprof | [] [] [] | + gpsdrive | [] [] [] | + gramadoir | [] [] [] | + grep | [] | + grub | [] [] | + gsasl | [] | + gss | | + gst-plugins-bad | [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] () [] | + gtkam | [] [] () [] [] | + gtkorphan | [] [] [] [] | + gtkspell | [] [] [] [] [] [] [] | + gutenprint | [] [] [] | + hello | [] [] [] [] | + help2man | [] | + hylafax | [] [] | + idutils | [] [] | + indent | [] [] [] [] [] [] [] | + iso_15924 | [] () [] [] | + iso_3166 | [] [] [] [] () [] [] [] () | + iso_3166_2 | () | + iso_4217 | [] [] [] () [] [] | + iso_639 | [] [] [] [] () [] [] | + iso_639_3 | [] | + jwhois | [] | + kbd | [] [] [] [] [] | + keytouch | [] [] | + keytouch-editor | [] [] | + keytouch-keyboa... | [] | + klavaro | [] [] [] [] | + latrine | [] () | + ld | [] [] | + leafpad | [] [] [] [] [] [] | + libc | [] [] [] [] | + libexif | [] [] () | + libextractor | | + libgnutls | [] | + libgpewidget | [] [] | + libgpg-error | [] [] | + libgphoto2 | [] () | + libgphoto2_port | [] () [] | + libgsasl | | + libiconv | [] [] [] [] [] | + libidn | [] [] [] | + lifelines | [] () | + liferea | [] [] [] [] [] | + lilypond | [] [] [] | + linkdr | [] [] [] | + lordsawar | [] | + lprng | | + lynx | [] [] [] [] | + m4 | [] [] [] [] | + mailfromd | | + mailutils | [] | + make | [] [] [] | + man-db | | + man-db-manpages | | + minicom | [] [] [] [] | + mkisofs | | + myserver | | + nano | [] [] [] | + opcodes | [] [] | + parted | [] [] | + pies | | + popt | [] [] [] [] [] | + psmisc | [] [] [] | + pspp | [] | + pwdutils | [] | + radius | [] | + recode | [] [] [] [] [] [] | + rosegarden | () () () | + rpm | [] [] [] | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] [] [] [] | + sed | [] [] [] [] [] [] | + sharutils | [] [] [] [] | + shishi | | + skencil | [] () [] | + solfege | [] [] [] | + solfege-manual | [] [] | + soundtracker | [] [] [] | + sp | [] | + sysstat | [] [] [] | + tar | [] [] [] [] | + texinfo | [] [] [] | + tin | [] [] | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] [] [] [] | + vice | () () | + vmm | [] | + vorbis-tools | [] [] | + wastesedge | [] | + wdiff | [] [] | + wget | [] [] [] | + wyslij-po | | + xchat | [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] [] | + +-------------------------------------------------+ + crh cs da de el en en_GB en_ZA eo es et eu fa + 5 64 105 117 18 1 8 0 28 89 18 19 0 + + fi fr ga gl gu he hi hr hu hy id is it ja ka kn + +----------------------------------------------------+ + a2ps | [] [] [] [] | + aegis | [] [] | + ant-phone | [] [] | + anubis | [] [] [] [] | + aspell | [] [] [] [] | + bash | [] [] [] [] | + bfd | [] [] [] | + bibshelf | [] [] [] [] [] | + binutils | [] [] [] | + bison | [] [] [] [] | + bison-runtime | [] [] [] [] [] [] | + bluez-pin | [] [] [] [] [] [] [] [] | + bombono-dvd | [] | + buzztard | [] | + cflow | [] [] [] | + clisp | [] | + coreutils | [] [] [] [] [] | + cpio | [] [] [] [] | + cppi | [] [] | + cpplib | [] [] [] | + cryptsetup | [] [] [] | + dfarc | [] [] [] | + dialog | [] [] [] [] [] [] [] | + dico | | + diffutils | [] [] [] [] [] [] [] [] [] | + dink | [] | + doodle | [] [] | + e2fsprogs | [] [] | + enscript | [] [] [] [] | + exif | [] [] [] [] [] [] | + fetchmail | [] [] [] [] | + findutils | [] [] [] [] [] [] | + flex | [] [] [] | + freedink | [] [] [] | + gas | [] [] | + gawk | [] [] [] [] () [] | + gcal | [] | + gcc | [] | + gettext-examples | [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] | + gettext-tools | [] [] [] [] | + gip | [] [] [] [] [] [] | + gjay | [] | + gliv | [] () | + glunarclock | [] [] [] [] | + gnubiff | () [] () | + gnucash | () () () () () [] | + gnuedu | [] [] | + gnulib | [] [] [] [] [] [] | + gnunet | | + gnunet-gtk | [] | + gnutls | [] [] | + gold | [] [] | + gpe-aerial | [] [] [] | + gpe-beam | [] [] [] [] | + gpe-bluetooth | [] [] [] [] | + gpe-calendar | [] [] | + gpe-clock | [] [] [] [] [] | + gpe-conf | [] [] [] [] | + gpe-contacts | [] [] [] [] | + gpe-edit | [] [] [] | + gpe-filemanager | [] [] [] [] | + gpe-go | [] [] [] [] [] | + gpe-login | [] [] [] | + gpe-ownerinfo | [] [] [] [] [] | + gpe-package | [] [] [] | + gpe-sketchbook | [] [] [] [] | + gpe-su | [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] | + gpe-timesheet | [] [] [] [] [] | + gpe-today | [] [] [] [] [] [] [] | + gpe-todo | [] [] [] | + gphoto2 | [] [] [] [] [] [] | + gprof | [] [] [] [] | + gpsdrive | [] [] [] | + gramadoir | [] [] [] | + grep | [] [] | + grub | [] [] [] [] | + gsasl | [] [] [] [] [] | + gss | [] [] [] [] [] | + gst-plugins-bad | [] [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] [] [] [] [] | + gtkam | [] [] [] [] [] | + gtkorphan | [] [] [] | + gtkspell | [] [] [] [] [] [] [] [] [] | + gutenprint | [] [] [] [] | + hello | [] [] [] | + help2man | [] [] | + hylafax | [] | + idutils | [] [] [] [] [] [] | + indent | [] [] [] [] [] [] [] [] | + iso_15924 | [] () [] [] | + iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] | + iso_3166_2 | () [] [] [] | + iso_4217 | [] () [] [] [] [] | + iso_639 | [] () [] [] [] [] [] [] [] | + iso_639_3 | () [] [] | + jwhois | [] [] [] [] [] | + kbd | [] [] | + keytouch | [] [] [] [] [] [] | + keytouch-editor | [] [] [] [] [] | + keytouch-keyboa... | [] [] [] [] [] | + klavaro | [] [] | + latrine | [] [] [] | + ld | [] [] [] [] | + leafpad | [] [] [] [] [] [] [] () | + libc | [] [] [] [] [] | + libexif | [] | + libextractor | | + libgnutls | [] [] | + libgpewidget | [] [] [] [] | + libgpg-error | [] [] | + libgphoto2 | [] [] [] | + libgphoto2_port | [] [] [] | + libgsasl | [] [] [] [] [] | + libiconv | [] [] [] [] [] [] | + libidn | [] [] [] [] | + lifelines | () | + liferea | [] [] [] [] | + lilypond | [] [] | + linkdr | [] [] [] [] [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] [] [] | + m4 | [] [] [] [] [] [] | + mailfromd | | + mailutils | [] [] | + make | [] [] [] [] [] [] [] [] [] | + man-db | [] [] | + man-db-manpages | [] | + minicom | [] [] [] [] [] | + mkisofs | [] [] [] [] | + myserver | | + nano | [] [] [] [] [] [] | + opcodes | [] [] [] [] | + parted | [] [] [] [] | + pies | | + popt | [] [] [] [] [] [] [] [] [] | + psmisc | [] [] [] | + pspp | | + pwdutils | [] [] | + radius | [] [] | + recode | [] [] [] [] [] [] [] [] | + rosegarden | () () () () () | + rpm | [] [] | + rush | | + sarg | [] | + screem | [] [] | + scrollkeeper | [] [] [] [] | + sed | [] [] [] [] [] [] [] [] | + sharutils | [] [] [] [] [] [] [] | + shishi | [] | + skencil | [] | + solfege | [] [] [] [] | + solfege-manual | [] [] | + soundtracker | [] [] | + sp | [] () | + sysstat | [] [] [] [] [] | + tar | [] [] [] [] [] [] [] | + texinfo | [] [] [] [] | + tin | [] | + unicode-han-tra... | | + unicode-transla... | [] [] | + util-linux-ng | [] [] [] [] [] [] | + vice | () () () | + vmm | [] | + vorbis-tools | [] | + wastesedge | () () | + wdiff | [] | + wget | [] [] [] [] [] [] [] [] | + wyslij-po | [] [] [] | + xchat | [] [] [] [] [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] | + +----------------------------------------------------+ + fi fr ga gl gu he hi hr hu hy id is it ja ka kn + 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4 + + ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne + +-----------------------------------------------+ + a2ps | [] | + aegis | | + ant-phone | | + anubis | [] [] | + aspell | [] | + bash | | + bfd | | + bibshelf | [] [] | + binutils | | + bison | [] | + bison-runtime | [] [] [] [] [] | + bluez-pin | [] [] [] [] [] | + bombono-dvd | | + buzztard | | + cflow | | + clisp | | + coreutils | [] | + cpio | | + cppi | | + cpplib | | + cryptsetup | | + dfarc | [] | + dialog | [] [] [] [] [] | + dico | | + diffutils | [] [] | + dink | | + doodle | | + e2fsprogs | | + enscript | | + exif | [] | + fetchmail | | + findutils | | + flex | | + freedink | [] | + gas | | + gawk | | + gcal | | + gcc | | + gettext-examples | [] [] [] [] | + gettext-runtime | [] | + gettext-tools | [] | + gip | [] [] | + gjay | | + gliv | | + glunarclock | [] | + gnubiff | | + gnucash | () () () () | + gnuedu | | + gnulib | | + gnunet | | + gnunet-gtk | | + gnutls | [] | + gold | | + gpe-aerial | [] | + gpe-beam | [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] | + gpe-clock | [] [] [] [] [] | + gpe-conf | [] [] | + gpe-contacts | [] [] | + gpe-edit | [] | + gpe-filemanager | [] [] | + gpe-go | [] [] [] | + gpe-login | [] | + gpe-ownerinfo | [] [] | + gpe-package | [] [] | + gpe-sketchbook | [] [] | + gpe-su | [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] [] | + gpe-timesheet | [] [] | + gpe-today | [] [] [] [] | + gpe-todo | [] [] | + gphoto2 | | + gprof | [] | + gpsdrive | | + gramadoir | | + grep | | + grub | | + gsasl | | + gss | | + gst-plugins-bad | [] [] [] [] | + gst-plugins-base | [] [] | + gst-plugins-good | [] [] | + gst-plugins-ugly | [] [] [] [] [] | + gstreamer | | + gtick | | + gtkam | [] | + gtkorphan | [] [] | + gtkspell | [] [] [] [] [] [] [] | + gutenprint | | + hello | [] [] [] | + help2man | | + hylafax | | + idutils | | + indent | | + iso_15924 | [] [] | + iso_3166 | [] [] () [] [] [] [] [] | + iso_3166_2 | | + iso_4217 | [] [] | + iso_639 | [] [] | + iso_639_3 | [] | + jwhois | [] | + kbd | | + keytouch | [] | + keytouch-editor | [] | + keytouch-keyboa... | [] | + klavaro | [] | + latrine | [] | + ld | | + leafpad | [] [] [] | + libc | [] | + libexif | | + libextractor | | + libgnutls | [] | + libgpewidget | [] [] | + libgpg-error | | + libgphoto2 | | + libgphoto2_port | | + libgsasl | | + libiconv | | + libidn | | + lifelines | | + liferea | | + lilypond | | + linkdr | | + lordsawar | | + lprng | | + lynx | | + m4 | | + mailfromd | | + mailutils | | + make | [] | + man-db | | + man-db-manpages | | + minicom | [] | + mkisofs | | + myserver | | + nano | [] [] | + opcodes | | + parted | | + pies | | + popt | [] [] [] | + psmisc | | + pspp | | + pwdutils | | + radius | | + recode | | + rosegarden | | + rpm | | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] | + sed | | + sharutils | | + shishi | | + skencil | | + solfege | [] | + solfege-manual | | + soundtracker | | + sp | | + sysstat | [] | + tar | [] | + texinfo | [] | + tin | | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | | + vice | | + vmm | | + vorbis-tools | | + wastesedge | | + wdiff | | + wget | [] | + wyslij-po | | + xchat | [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +-----------------------------------------------+ + ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne + 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1 + + nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr + +---------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] [] | + aegis | [] [] [] | + ant-phone | [] [] | + anubis | [] [] [] | + aspell | [] [] [] [] [] | + bash | [] [] | + bfd | [] | + bibshelf | [] [] | + binutils | [] [] | + bison | [] [] [] | + bison-runtime | [] [] [] [] [] [] [] | + bluez-pin | [] [] [] [] [] [] [] [] | + bombono-dvd | [] () | + buzztard | [] [] | + cflow | [] | + clisp | [] [] | + coreutils | [] [] [] [] [] [] | + cpio | [] [] [] | + cppi | [] | + cpplib | [] | + cryptsetup | [] | + dfarc | [] | + dialog | [] [] [] [] | + dico | [] | + diffutils | [] [] [] [] [] [] | + dink | () | + doodle | [] [] | + e2fsprogs | [] [] | + enscript | [] [] [] [] [] | + exif | [] [] [] () [] | + fetchmail | [] [] [] [] | + findutils | [] [] [] [] [] | + flex | [] [] [] [] [] | + freedink | [] [] | + gas | | + gawk | [] [] [] [] | + gcal | | + gcc | [] | + gettext-examples | [] [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] [] [] [] | + gettext-tools | [] [] [] [] [] [] | + gip | [] [] [] [] [] | + gjay | | + gliv | [] [] [] [] [] [] | + glunarclock | [] [] [] [] [] | + gnubiff | [] () | + gnucash | [] () () () | + gnuedu | [] | + gnulib | [] [] [] [] | + gnunet | | + gnunet-gtk | | + gnutls | [] [] | + gold | | + gpe-aerial | [] [] [] [] [] [] [] | + gpe-beam | [] [] [] [] [] [] [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] [] [] [] | + gpe-clock | [] [] [] [] [] [] [] [] | + gpe-conf | [] [] [] [] [] [] [] | + gpe-contacts | [] [] [] [] [] | + gpe-edit | [] [] [] | + gpe-filemanager | [] [] [] | + gpe-go | [] [] [] [] [] [] [] [] | + gpe-login | [] [] | + gpe-ownerinfo | [] [] [] [] [] [] [] [] | + gpe-package | [] [] | + gpe-sketchbook | [] [] [] [] [] [] [] | + gpe-su | [] [] [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] [] [] [] | + gpe-timesheet | [] [] [] [] [] [] [] [] | + gpe-today | [] [] [] [] [] [] [] [] | + gpe-todo | [] [] [] [] [] | + gphoto2 | [] [] [] [] [] [] [] [] | + gprof | [] [] [] | + gpsdrive | [] [] | + gramadoir | [] [] | + grep | [] [] [] [] | + grub | [] [] [] | + gsasl | [] [] [] [] | + gss | [] [] [] | + gst-plugins-bad | [] [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] [] [] | + gtkam | [] [] [] [] [] [] | + gtkorphan | [] | + gtkspell | [] [] [] [] [] [] [] [] [] [] | + gutenprint | [] [] | + hello | [] [] [] [] | + help2man | [] [] | + hylafax | [] | + idutils | [] [] [] [] [] | + indent | [] [] [] [] [] [] [] | + iso_15924 | [] [] [] [] | + iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] | + iso_3166_2 | [] [] [] | + iso_4217 | [] [] [] [] [] [] [] [] | + iso_639 | [] [] [] [] [] [] [] [] [] | + iso_639_3 | [] [] | + jwhois | [] [] [] [] | + kbd | [] [] [] | + keytouch | [] [] [] | + keytouch-editor | [] [] [] | + keytouch-keyboa... | [] [] [] | + klavaro | [] [] | + latrine | [] [] | + ld | | + leafpad | [] [] [] [] [] [] [] [] [] | + libc | [] [] [] [] | + libexif | [] [] () [] | + libextractor | | + libgnutls | [] [] | + libgpewidget | [] [] [] | + libgpg-error | [] [] | + libgphoto2 | [] [] | + libgphoto2_port | [] [] [] [] [] | + libgsasl | [] [] [] [] [] | + libiconv | [] [] [] [] [] | + libidn | [] [] | + lifelines | [] [] | + liferea | [] [] [] [] [] () () [] | + lilypond | [] | + linkdr | [] [] [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] | + m4 | [] [] [] [] [] | + mailfromd | [] | + mailutils | [] | + make | [] [] [] [] | + man-db | [] [] [] | + man-db-manpages | [] [] [] | + minicom | [] [] [] [] | + mkisofs | [] [] [] | + myserver | | + nano | [] [] [] [] | + opcodes | [] [] | + parted | [] [] [] [] | + pies | [] | + popt | [] [] [] [] | + psmisc | [] [] [] | + pspp | [] [] | + pwdutils | [] | + radius | [] [] [] | + recode | [] [] [] [] [] [] [] [] | + rosegarden | () () | + rpm | [] [] [] | + rush | [] [] | + sarg | | + screem | | + scrollkeeper | [] [] [] [] [] [] [] [] | + sed | [] [] [] [] [] [] [] [] [] | + sharutils | [] [] [] [] | + shishi | [] | + skencil | [] [] | + solfege | [] [] [] [] | + solfege-manual | [] [] [] | + soundtracker | [] | + sp | | + sysstat | [] [] [] [] | + tar | [] [] [] [] | + texinfo | [] [] [] [] | + tin | [] | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] [] [] [] [] | + vice | [] | + vmm | [] | + vorbis-tools | [] [] | + wastesedge | [] | + wdiff | [] [] | + wget | [] [] [] [] [] [] [] | + wyslij-po | [] [] [] | + xchat | [] [] [] [] [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +---------------------------------------------------+ + nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr + 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37 + + sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW + +---------------------------------------------------+ + a2ps | [] [] [] [] [] | 27 + aegis | [] | 9 + ant-phone | [] [] [] [] | 9 + anubis | [] [] [] [] | 15 + aspell | [] [] [] | 20 + bash | [] [] [] | 12 + bfd | [] | 6 + bibshelf | [] [] [] | 16 + binutils | [] [] | 8 + bison | [] [] | 12 + bison-runtime | [] [] [] [] [] [] | 29 + bluez-pin | [] [] [] [] [] [] [] [] | 37 + bombono-dvd | [] | 4 + buzztard | [] | 7 + cflow | [] [] [] | 9 + clisp | | 10 + coreutils | [] [] [] [] | 22 + cpio | [] [] [] [] [] [] | 13 + cppi | [] [] | 5 + cpplib | [] [] [] [] [] [] | 14 + cryptsetup | [] [] | 7 + dfarc | [] | 9 + dialog | [] [] [] [] [] [] [] | 30 + dico | [] | 2 + diffutils | [] [] [] [] [] [] | 30 + dink | | 4 + doodle | [] [] | 7 + e2fsprogs | [] [] [] | 11 + enscript | [] [] [] [] | 17 + exif | [] [] [] | 16 + fetchmail | [] [] [] | 17 + findutils | [] [] [] [] [] | 20 + flex | [] [] [] [] | 15 + freedink | [] | 10 + gas | [] | 4 + gawk | [] [] [] [] | 18 + gcal | [] [] | 5 + gcc | [] [] [] | 7 + gettext-examples | [] [] [] [] [] [] [] | 34 + gettext-runtime | [] [] [] [] [] [] [] | 29 + gettext-tools | [] [] [] [] [] [] | 22 + gip | [] [] [] [] | 22 + gjay | [] | 3 + gliv | [] [] [] | 14 + glunarclock | [] [] [] [] [] | 19 + gnubiff | [] [] | 4 + gnucash | () [] () [] () | 10 + gnuedu | [] [] | 7 + gnulib | [] [] [] [] | 16 + gnunet | [] | 1 + gnunet-gtk | [] [] [] | 5 + gnutls | [] [] [] | 10 + gold | [] | 4 + gpe-aerial | [] [] [] | 18 + gpe-beam | [] [] [] | 19 + gpe-bluetooth | [] [] [] | 13 + gpe-calendar | [] [] [] [] | 12 + gpe-clock | [] [] [] [] [] | 28 + gpe-conf | [] [] [] [] | 20 + gpe-contacts | [] [] [] | 17 + gpe-edit | [] [] [] | 12 + gpe-filemanager | [] [] [] [] | 16 + gpe-go | [] [] [] [] [] | 25 + gpe-login | [] [] [] | 11 + gpe-ownerinfo | [] [] [] [] [] | 25 + gpe-package | [] [] [] | 13 + gpe-sketchbook | [] [] [] | 20 + gpe-su | [] [] [] [] [] | 30 + gpe-taskmanager | [] [] [] [] [] | 29 + gpe-timesheet | [] [] [] [] [] | 25 + gpe-today | [] [] [] [] [] [] | 30 + gpe-todo | [] [] [] [] | 17 + gphoto2 | [] [] [] [] [] | 24 + gprof | [] [] [] | 15 + gpsdrive | [] [] [] | 11 + gramadoir | [] [] [] | 11 + grep | [] [] [] | 10 + grub | [] [] [] | 14 + gsasl | [] [] [] [] | 14 + gss | [] [] [] | 11 + gst-plugins-bad | [] [] [] [] | 26 + gst-plugins-base | [] [] [] [] [] | 24 + gst-plugins-good | [] [] [] [] | 24 + gst-plugins-ugly | [] [] [] [] [] | 29 + gstreamer | [] [] [] [] | 22 + gtick | [] [] [] | 13 + gtkam | [] [] [] | 20 + gtkorphan | [] [] [] | 14 + gtkspell | [] [] [] [] [] [] [] [] [] | 45 + gutenprint | [] | 10 + hello | [] [] [] [] [] [] | 21 + help2man | [] [] | 7 + hylafax | [] | 5 + idutils | [] [] [] [] | 17 + indent | [] [] [] [] [] [] | 30 + iso_15924 | () [] () [] [] | 16 + iso_3166 | [] [] () [] [] () [] [] [] () | 53 + iso_3166_2 | () [] () [] | 9 + iso_4217 | [] () [] [] () [] [] | 26 + iso_639 | [] [] [] () [] () [] [] [] [] | 38 + iso_639_3 | [] () | 8 + jwhois | [] [] [] [] [] | 16 + kbd | [] [] [] [] [] | 15 + keytouch | [] [] [] | 16 + keytouch-editor | [] [] [] | 14 + keytouch-keyboa... | [] [] [] | 14 + klavaro | [] | 11 + latrine | [] [] [] | 10 + ld | [] [] [] [] | 11 + leafpad | [] [] [] [] [] [] | 33 + libc | [] [] [] [] [] | 21 + libexif | [] () | 7 + libextractor | [] | 1 + libgnutls | [] [] [] | 9 + libgpewidget | [] [] [] | 14 + libgpg-error | [] [] [] | 9 + libgphoto2 | [] [] | 8 + libgphoto2_port | [] [] [] [] | 14 + libgsasl | [] [] [] | 13 + libiconv | [] [] [] [] | 21 + libidn | () [] [] | 11 + lifelines | [] | 4 + liferea | [] [] [] | 21 + lilypond | [] | 7 + linkdr | [] [] [] [] [] | 17 + lordsawar | | 1 + lprng | [] | 3 + lynx | [] [] [] [] | 17 + m4 | [] [] [] [] | 19 + mailfromd | [] [] | 3 + mailutils | [] | 5 + make | [] [] [] [] | 21 + man-db | [] [] [] | 8 + man-db-manpages | | 4 + minicom | [] [] | 16 + mkisofs | [] [] | 9 + myserver | | 0 + nano | [] [] [] [] | 21 + opcodes | [] [] [] | 11 + parted | [] [] [] [] [] | 15 + pies | [] [] | 3 + popt | [] [] [] [] [] [] | 27 + psmisc | [] [] | 11 + pspp | | 4 + pwdutils | [] [] | 6 + radius | [] [] | 9 + recode | [] [] [] [] | 28 + rosegarden | () | 0 + rpm | [] [] [] | 11 + rush | [] [] | 4 + sarg | | 1 + screem | [] | 3 + scrollkeeper | [] [] [] [] [] | 27 + sed | [] [] [] [] [] | 30 + sharutils | [] [] [] [] [] | 22 + shishi | [] | 3 + skencil | [] [] | 7 + solfege | [] [] [] [] | 16 + solfege-manual | [] | 8 + soundtracker | [] [] [] | 9 + sp | [] | 3 + sysstat | [] [] | 15 + tar | [] [] [] [] [] [] | 23 + texinfo | [] [] [] [] [] | 17 + tin | | 4 + unicode-han-tra... | | 0 + unicode-transla... | | 2 + util-linux-ng | [] [] [] [] | 20 + vice | () () | 1 + vmm | [] | 4 + vorbis-tools | [] | 6 + wastesedge | | 2 + wdiff | [] [] | 7 + wget | [] [] [] [] [] | 26 + wyslij-po | [] [] | 8 + xchat | [] [] [] [] [] [] | 36 + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | 63 + xkeyboard-config | [] [] [] | 22 + +---------------------------------------------------+ + 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW + 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41 2618 + + Some counters in the preceding matrix are higher than the number of +visible blocks let us expect. This is because a few extra PO files are +used for implementing regional variants of languages, or language +dialects. + + For a PO file in the matrix above to be effective, the package to +which it applies should also have been internationalized and +distributed as such by its maintainer. There might be an observable +lag between the mere existence a PO file and its wide availability in a +distribution. + + If June 2010 seems to be old, you may fetch a more recent copy of +this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date +matrix with full percentage details can be found at +`http://translationproject.org/extra/matrix.html'. + +1.5 Using `gettext' in new packages +=================================== + +If you are writing a freely available program and want to +internationalize it you are welcome to use GNU `gettext' in your +package. Of course you have to respect the GNU Library General Public +License which covers the use of the GNU `gettext' library. This means +in particular that even non-free programs can use `libintl' as a shared +library, whereas only free software can use `libintl' as a static +library or use modified versions of `libintl'. + + Once the sources are changed appropriately and the setup can handle +the use of `gettext' the only thing missing are the translations. The +Free Translation Project is also available for packages which are not +developed inside the GNU project. Therefore the information given above +applies also for every other Free Software Project. Contact +`coordinator@translationproject.org' to make the `.pot' files available +to the translation teams. + diff --git a/AUTHORS b/AUTHORS new file mode 100644 index 0000000..27f1043 --- /dev/null +++ b/AUTHORS @@ -0,0 +1,3 @@ +Martin Baulig (martin@home-of-linux.org) +Drazen Kacar (dave@srce.hr) +Benoît Dejean (tazforever@dlfp.org) diff --git a/COPYING b/COPYING new file mode 100644 index 0000000..623b625 --- /dev/null +++ b/COPYING @@ -0,0 +1,340 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/ChangeLog b/ChangeLog new file mode 100644 index 0000000..2385c82 --- /dev/null +++ b/ChangeLog @@ -0,0 +1,4100 @@ +2007-05-19 Benoît Dejean + + * features.def: + * include/glibtop/proclist.h: + + Small API change. + get_proclist returns pid_t instead of unsigned for consistency. + I have checked many archs and this doesn't break the ABI. + +2007-05-17 Benoît Dejean + + * configure.in: + + Bumped version number. + +2007-05-14 Benoît Dejean + + * include/glibtop/Makefile.am: + * lib/Makefile.am: + + Fixed dist. + +2007-05-13 Benoît Dejean + + * NEWS: + * configure.in: + + Released 2.19.2. + +2007-05-10 Benoît Dejean + + * lib/libgtop.sym: + + Added missing *_p symbols. + +2007-05-07 Benoît Dejean + + * configure.in: + * lib/Makefile.am: + * lib/libgtop.sym: + + Updated libtool version. + Now uses a symbol list instead of a regex. + +2007-05-07 Benoît Dejean + + * New API to get cwd, root and exe path + of a process. API not frozen yet. + +2007-04-27 Benoît Dejean + + Got rid of InodeDB. + This feature was optionnal and i have never heard of anyone using + it. I have never touched it so it may be broken since 2.6. + +2007-04-11 Benoît Dejean + + * *: + + Renamed all glibtop_init_xxx functions + to _glibtop_init_xxx so they get internal visibility. + + * configure.in: + + Bumped version number. + +2007-03-13 Benoît Dejean + + * MAINTAINERS: + + Updated. + +2007-02-25 Benoît Dejean + + * NEWS: + + Released 2.14.8. + +2007-02-20 Benoît Dejean + + * *: + + Removed noisy $Id$. + +2007-02-18 Benoît Dejean + + * configure.in: + * libgtop-sysdeps.m4: + * sysdeps/Makefile.am: + + Huge (k)FreeBSD update. + (k)FreeBSD support is freebsd/ + Other BSD are in bsd/ + + Patch by Joe Marcus Clarke + Alexander Nedotsukov + + Closes #407693. + +2007-02-14 Benoît Dejean + + * lib/read.c: (glibtop_read_l): + * lib/write.c: (glibtop_write_l): + + Handle EINTR. + + * configure.in: + + Post release version bump. + +2007-02-10 Benoît Dejean + + * NEWS: + * configure.in: + + Released 2.14.7. + +2007-01-14 Benoît Dejean + + * NEWS: + + Released 2.14.6. + +2007-01-11 Benoît Dejean + + * configure.in: + + Bumped version number to 2.14.6. + + * *: + + Got rid of CVS admin files. + +2006-12-03 Benoît Dejean + + * doc/reference/libgtop-docs.xml: + * glibtop.h: + * include/glibtop/sysinfo.h: + + Made gtk-doc happy in order to dist. + +2006-12-03 Benoît Dejean + + * NEWS: + + Released 2.14.5. + +2006-12-02 Benoît Dejean + + * Makefile.am: + * configure.in: + * doc/Makefile.am: + * doc/reference/Makefile.am: + * doc/reference/libgtop-docs.xml: + * doc/reference/libgtop-sections.txt: + * doc/reference/version.xml.in: + * gtk-doc.make: + * sysdeps/common/default.c: + + Converted to gtk-doc. + Patch by Germán Poó-Caamaño . + +2006-12-01 Julio M. Merino Vidal + + * configure.in: + * libgtop-sysdeps.m4: + + Use the AS_HELP_STRING macro to format help messages. + Fixes bug #337068. + +2006-11-27 Benoît Dejean + + * libgtop-sysdeps.m4: + + Added kfreebsd support. + Patch by Petr Salinger . + +2006-11-27 Benoît Dejean + + * configure.in: + + Bumped version number. + +2006-09-16 Benoît Dejean + + * NEWS: + * configure.in: + + Released 2.14.4. + +2006-09-10 Benoît Dejean + + * configure.in: + * include/glibtop/procstate.h: + + Removed wrong inline documentation. + Closes #355286. + +2006-09-05 Benoît Dejean + + * NEWS: + + Released 2.14.3. + +2006-08-14 Benoît Dejean + + * src/inodedb/Makefile.am: + + Fixed inodedb build with --as-needed to please people + who want to compile and optimize broken, deprecated and + never-used feature. + Patch by Daniel Gryniewicz + Closes #341041. + +2006-08-10 Benoît Dejean + + * configure.in: + + Bumped version number. + + * glibtop.h: + * include/glibtop/init_hooks.h: + + Added missing G_(BEGIN|END)_DECLS. + +2006-07-27 Benoît Dejean + + * NEWS: + + Released 2.14.2. + +2006-07-27 Benoît Dejean + + * include/glibtop/netload.h: + + Tiny interface addition to handle wireless interfaces. + +2006-06-26 Benoît Dejean + + * po/Makefile.in.in.in: + + Dropped dead file. + +2006-06-25 Benoît Dejean + + * Makefile.am: + + Fixed build. + Closes #341779. + +2006-06-24 Benoît Dejean + + * Makefile.am: + + Build examples only when needed. + Patch by dmacks@netspace.org. + Closes #342863. + +2006-06-24 Benoît Dejean + + * libgtop-sysdeps.m4: + * sysdeps/solaris/glibtop_machine.h: + + Updated the GLIBTOP_SOLARIS_RELEASE + + Patch by hua.zhang@sun.com. + Closes #345821. + +2006-06-24 Benoît Dejean + + * configure.in: + + Don't use kvm on newer solaris. + Patch by hua.zhang@sun.com. + Closes #345811. + +2006-06-04 Benoît Dejean + + * libgtop-sysdeps.m4: + + Removed undefined LIBGTOP_HACKER_TESTS. + Closes #342890. + +2006-06-03 Benoît Dejean + + * .cvsignore: + * Makefile.am: + * configure.in: + * po/LINGUAS: + + Use po/LINGUAS. + Closes #337902. + +2006-04-18 German Poo-Caaman~o + + * /include/glibtop/cpu.h: + * /include/glibtop/fsusage.h: + * /include/glibtop/loadavg.h: + * /include/glibtop/mem.h: + * /include/glibtop/mountlist.h: + * /include/glibtop/msg_limits.h: + * /include/glibtop/netload.h: + * /include/glibtop/ppp.h: + * /include/glibtop/procargs.h: + * /include/glibtop/prockernel.h: + * /include/glibtop/proclist.h: + * /include/glibtop/procmap.h: + * /include/glibtop/procmem.h: + * /include/glibtop/procopenfiles.h: + * /include/glibtop/procsegment.h: + * /include/glibtop/procsignal.h: + * /include/glibtop/procstate.h: + * /include/glibtop/proctime.h: + * /include/glibtop/procuid.h: + * /include/glibtop/sem_limits.h: + * /include/glibtop/shm_limits.h: + * /include/glibtop/swap.h: + * /include/glibtop/sysdeps.h: + * /include/glibtop/uptime.h: + + Changed struct's definitions to be one type-one member. To + avoid problems with any further gtk-doc's implementation. + +2006-04-18 Kjartan Maraas + + * configure.in: Remove obsolete entry for no_NO + * po/no.po: And the translation. + +2006-04-10 Benoît Dejean + + * NEWS: + + Released 2.14.1. + +2006-04-10 Benoît Dejean + + * lib/open.c: (glibtop_open_l): + * lib/read.c: (glibtop_read_l): + * lib/write.c: (glibtop_write_l): + + Fixed a bunch of signedness warnings. + +2006-04-04 Julio M. Merino Vidal + + * libgtop-sysdeps.m4: + * sysdeps/freebsd/msg_limits.c: + + Use configure checks to detect whether we need to define either + KERNEL or _KERNEL to get the definition of 'struct msginfo' in a + BSD system. This replaces the previous checks in the code that + relied on __FreeBSD__ and similar macros. + + Before this change, the explicit definition of _KERNEL in the + msg_limits.c file broke the build in NetBSD because it made the + system headers pull in stuff unavailable to userland. + + Fixes bug #337207. + +2006-04-04 Julio M. Merino Vidal + + * libgtop-sysdeps.m4: + * sysdeps/freebsd/Makefile.am: + + Check for the kvm library and use it to link the suid freebsd + sysdeps code (only if available). This library provides all the + kvm_* functions used in it and is needed, at least, under NetBSD. + + Fixes bug #337247. + +2006-04-04 Julio M. Merino Vidal + + * sysdeps/aix/glibtop_server.h: + * sysdeps/freebsd/glibtop_server.h: + * sysdeps/osf1/glibtop_server.h: + * sysdeps/stub/glibtop_server.h: + * sysdeps/stub_suid/glibtop_server.h: + + Synch the list of GLIBTOP_SUID_* constants with those expected by + the lib/sysdeps.c file. Fixes the build under, at least, NetBSD + and FreeBSD. + + Fixes bug #337246. + +2006-04-02 Benoît Dejean + + * configure.in: + + Bumped version to 2.14.1. + Removed no longer needed gcc flag. + +2006-04-02 Benoît Dejean + + * configure.in: + * src/daemon/daemon.h: + * src/daemon/gnuserv.c: (main): + + Reverted. See #336837 + +2006-03-18 Vladimer Sichinava + + * configure.in: Added "ka" (Georgian) to ALL_LINGUAS + +2006-03-13 Benoît Dejean + + * NEWS: + * configure.in: + + Released 2.14.0. + +2006-02-27 Benoît Dejean + + * NEWS: + * configure.in: + + Released 2.13.92. + +2006-02-20 Benoît Dejean + + * configure.in: + + Bump version to 2.13.4. + Reordered libs. Closes #329153. + +2006-01-23 Benoît Dejean + + * configure.in: + * NEW: + + Released 2.13.3. + +2006-01-02 Benoît Dejean + + * NEWS: + * configure.in: + + Released 2.13.2. + +2006-01-02 James Henstridge + + * configure.in (LT_VERSION_INFO): add quotes around symbol definition. + +2005-12-15 Benoît Dejean + + * configure.in: + * NEWS: + + Released 2.13.1. + +2005-12-13 Benoît Dejean + + * NEWS: + + Released 2.13.0. + +2005-12-12 James Henstridge + + * doc/auto-macros.texi.in: remove unused file. + + * doc/libgtop2.texi: don't include auto-macros.texi. + + * doc/Makefile.am: don't build auto-macros.texi, since none of its + macros are used in the documentation any more. + + * include/glibtop/global.h: don't include from headers. + + * .../*.c: make sure is the first thing included. + + * acinclude.m4: m4_include() libgtop-sysdeps.m4 rather than + inlining it. + + * acinclude.m4, libgtop-sysdeps.m4: use third argument to + AC_DEFINE() to set the comment. + + * configure.in: modernise a bit. + + * acconfig.h: remove file, since it is deprecated + + * autogen.sh: require automake 1.9 instead of 1.4. + +2005-12-09 Benoît Dejean + + * configure.in: + * glibtop.h: + * include/glibtop/cpu.h: + * include/glibtop/procmap.h: + + Increased GLIBTOP_NCPU to 32. + Added real_ncpu to struct glibtop. + Added smaps members to glibtop_map_entry. + + Bumped version number to 2.13.0 + Broke ABI again. Sorry. + +2005-12-08 Benoît Dejean + + * doc/reference.texi: + * include/glibtop/limits.h: + + Dropped unused file and updated documentation. + +2005-12-07 Benoît Dejean + + * configure.in: + + Bumped version number. + +2005-12-04 Theppitak Karoonboonyanan + + * configure.in: Added 'th' (Thai) to ALL_LINGUAS. + +2005-11-29 Benoît Dejean + + * NEWS: + * configure.in: + + Released 2.12.2. + No 2.12.1. + +2005-11-17 Timur Jamakeev + + * configure.in: Added 'ky' (Kirghiz) to ALL_LINGUAS. + +2005-10-30 Benoît Dejean + + * configure.in: + * include/glibtop/glibtop-backend-info.h: + * include/glibtop/glibtop-backend.h: + * include/glibtop/glibtop-client.h: + * lib/glibtop-backend-info.c: + * lib/glibtop-backend.c: + * lib/glibtop-client-private.h: + * lib/glibtop-client.c: + * lib/test-backends.c: + * sysdeps/common/backend.c: + * sysdeps/common/libgtop-common.backend: + + Dropped many dead files. + Bumped release number. + I guess this closes #320250. + +2005-10-28 Erdal Ronahi + + * configure.in: Added ku (Kurdish) to ALL_LINGUAS + +2005-09-04 Benoît Dejean + + * NEWS: + * configure.in: + + Released 2.12.0. + +2005-08-22 Benoît Dejean + + * configure.in: + + Hum hum, it's better if release number is 2.11.92 too. + +2005-08-22 Benoît Dejean + + * NEWS: + + Released 2.11.92. + +2005-08-08 Benoît Dejean + + * NEWS: + + Released 2.11.91. + +2005-08-04 Benoît Dejean + + * configure.in: + * examples/Makefile.am: + + Removed static examples. + +2005-08-02 Benoît Dejean + + * configure.in: + * include/glibtop/Makefile.am: + * include/glibtop/glibtop-server.h: + * include/glibtop/init_hooks.h: + * include/glibtop/sysdeps.h: + * lib/init.c: (glibtop_init_s): + * lib/sysdeps.c: + * sysdeps/aix/open.c: (glibtop_init_p): + * sysdeps/common/sysdeps_suid.c: + * sysdeps/freebsd/open.c: (glibtop_init_p): + * sysdeps/osf1/open_suid.c: (glibtop_init_p): + * sysdeps/solaris/open_suid.c: (glibtop_init_p): + * sysdeps/stub_suid/open.c: (glibtop_init_p): + + Moved _glibtop_init_hook_[sp] declaration to private + glibtop/init_hooks.h. Marked them const. + + Fixed GLIBTOP_SUID_NETLIST issues. + +2005-07-24 Benoît Dejean + + * NEWS: + * configure.in: Released 2.11.90. + +2005-07-22 Benoît Dejean + + * configure.in: 2.11.3 post release version bump. + +2005-07-13 Benoît Dejean + + * NEWS: Released 2.11.2. + +2005-07-06 Benoît Dejean + + * configure.in: 2.11.2 post release version bump. + +2005-07-03 Benoît Dejean + + * NEWS: Released 2.11.1. + +2005-06-15 Benoît Dejean + + * sysdeps/common/Makefile.am: + * sysdeps/linux/Makefile.am: Removed LT_VERSION_INFO from LDFLAGS + when unused. + +2005-06-08 Benoît Dejean + + * configure.in: 2.11.1 post release version bump. + +2005-06-08 Benoît Dejean + + * NEWS: Released 2.11.0. + +2005-06-07 Benoît Dejean + + * configure.in: + * glibtop.h: + * include/glibtop/close.h: + * include/glibtop/cpu.h: + * include/glibtop/fsusage.h: + * include/glibtop/loadavg.h: + * include/glibtop/mem.h: + * include/glibtop/mountlist.h: + * include/glibtop/msg_limits.h: + * include/glibtop/netlist.h: + * include/glibtop/netload.h: + * include/glibtop/ppp.h: + * include/glibtop/procargs.h: + * include/glibtop/prockernel.h: + * include/glibtop/proclist.h: + * include/glibtop/procmap.h: + * include/glibtop/procmem.h: + * include/glibtop/procopenfiles.h: + * include/glibtop/procsegment.h: + * include/glibtop/procsignal.h: + * include/glibtop/procstate.h: + * include/glibtop/proctime.h: + * include/glibtop/procuid.h: + * include/glibtop/sem_limits.h: + * include/glibtop/shm_limits.h: + * include/glibtop/swap.h: + * include/glibtop/sysdeps.h: + * include/glibtop/sysinfo.h: + * include/glibtop/uptime.h: + * sysdeps/common/Makefile.am: + * sysdeps/common/default.c: (glibtop_close), (glibtop_init), + (glibtop_get_cpu), (glibtop_get_fsusage), (glibtop_get_uptime), + (glibtop_get_sysinfo), (glibtop_get_swap), (glibtop_get_proc_uid), + (glibtop_get_proc_time), (glibtop_get_proc_state), + (glibtop_get_proc_signal), (glibtop_get_proc_segment), + (glibtop_get_proc_open_files), (glibtop_get_proc_mem), + (glibtop_get_proc_map), (glibtop_get_proc_args), + (glibtop_get_proc_argv), (glibtop_get_proclist), + (glibtop_get_proc_kernel), (glibtop_get_ppp), + (glibtop_get_netlist), (glibtop_get_netload), + (glibtop_get_mountlist), (glibtop_get_mem), (glibtop_get_loadavg), + (glibtop_get_msg_limits), (glibtop_get_sem_limits), + (glibtop_get_shm_limits), (glibtop_get_sysdeps): + + Added a lot of new functions to replace dirty macros. + Every macro glibtop_get_*(buf[, args]) has been turned to a function. + +2005-06-06 Benoît Dejean + + * dtd/: Bye bye. + +2005-06-06 Benoît Dejean + + * backends/: Removed useless files. + +2005-06-06 Benoît Dejean + + * examples/smp.c: (main): Removed translation. + + * lib/lib.pl: + * lib/read.c: + * lib/read_data.c: + * lib/write.c: + * src/daemon/gnuserv.c: s/gi18n.h/gi18n-lib.h. + +2005-06-06 Benoît Dejean + + * acinclude.m4: bye bye support. + +2005-06-06 Benoît Dejean + + * support/ : Removed unused files. + +2005-06-06 Benoît Dejean + + * examples/smp.c: + * include/Makefile.am: + * include/libgtop-i18n.h: + * lib/lib.pl: + * lib/read.c: + * lib/read_data.c: + * lib/write.c: + * src/daemon/gnuserv.c: Got rid of include/libgtop-i18n.h. + +2005-06-06 Benoît Dejean + + * configure.in: version bump. + +2005-06-05 Benoît Dejean + + * README: Updated so people can find the ChangeLogs. + +2005-04-27 Benoît Dejean + + * configure.in: 2.10.2 post release bump. + + * include/glibtop/Makefile.am: + * include/glibtop/parameter.h: + * lib/init.c: Re-install open.h to please GTop (libgtop perl wrapper). + +2005-04-10 Benoît Dejean + + * NEWS: Released 2.10.1. + +2005-04-01 Adi Attar + + * configure.in: Added "xh" to ALL_LINGUAS. + +2005-03-31 Steve Murphy + + * configure.in: Added "rw" to ALL_LINGUAS. + +2005-03-31 Benoît Dejean + + * libgtop-2.0.pc.in: Fixed. + +2005-03-29 Benoît Dejean + + * lib/read_data.c: (glibtop_read_data_l): Fixed warning. + +2005-03-25 Benoît Dejean + + * lib/error.c: (glibtop_error_io_vr), (glibtop_warn_io_vr): + s/strerror/g_strerror. + +2005-03-11 Benoît Dejean + + * configure.in: Post release version bump. + +2005-03-07 Benoît Dejean + + * NEWS: + * configure.in: Released 2.10.0. + +2005-02-28 Benoît Dejean + + * NEWS: Released 2.9.92. + +2005-02-25 Benoît Dejean + + * configure.in: /me stupid. I've already post-bumped version. + +2005-02-24 Benoît Dejean + + * configure.in: post release bump 2.9.93. + +2005-02-22 Benoît Dejean + + * src/Makefile.am: Build and install libgtop2_daemon only if needed. + +2005-02-21 Benoît Dejean + + * lib/Makefile.am: don't export private symbols. + +2005-02-15 Benoît Dejean + + * backends/server/server.h: + * configure.in: + * glibtop.h: + * include/glibtop/Makefile.am: + * include/glibtop/gnuserv.h: + * include/glibtop/open.h: + * include/glibtop/read.h: + * include/glibtop/read_data.h: + * include/glibtop/types.h: + * include/glibtop/write.h: + * lib/close.c: + * lib/init.c: + * lib/lib.pl: + * lib/open.c: + * lib/parameter.c: + * lib/read.c: + * lib/read_data.c: + * lib/write.c: + * src/daemon/daemon.h: + * src/daemon/io.c: + * src/daemon/main.c: (handle_parent_connection): + * src/daemon/slave.c: (handle_slave_connection), + (handle_slave_command): + * sysdeps/common/gnuslib.c: + * sysdeps/solaris/glibtop_private.h: Removed some dead files. + Don't install private headers. + + Depends on glib-2.6. + Post-release bump : 2.9.92 + +2005-02-15 Benoît Dejean + + * include/glibtop/error.h: Don't export private symbols. + +2005-02-15 Benoît Dejean + + * include/glibtop/error.h: G_GNUC_NORETURN love. + + * include/glibtop/errors.h: + * lib/errors.c: Bye bye dead code. + +2005-02-06 Benoît Dejean + + * NEWS: + * configure.in: Released 2.9.91. + +2005-01-24 Benoît Dejean + + * NEWS: + * configure.in: Released 2.9.90. + +2005-01-24 Benoît Dejean + + * include/glibtop/procopenfiles.h: + * sysdeps/linux/procopenfiles.c: + * sysdeps/stub/procopenfiles.c: UTF-8-ified. + +2005-01-22 Benoît Dejean + + * examples/openfiles.c: (show_open_files): + * include/glibtop/procopenfiles.h: added localsock { name } to + glibtop_open_files_entry. Should not break ABI. + +2005-01-12 Benoît Dejean + + * configure.in: 2.9.5. + +2005-01-10 Benoît Dejean + + * NEWS: Released 2.9.4. + +2005-01-10 Benoît Dejean + + * configure.in: + * examples/.cvsignore: + * examples/Makefile.am: + * examples/openfiles.c: (show_open_files), (main): + * features.def: + * include/glibtop/Makefile.am: + * include/glibtop/command.h: + * include/glibtop/procopenfiles.h: + * include/glibtop/sysdeps.h: + * include/glibtop/union.h: + * structures.def: + * sysdeps/linux/Makefile.am: + * sysdeps/linux/procopenfiles.c: (glibtop_init_proc_open_files_s), + (get_socket_endpoint), (glibtop_get_proc_open_files_s): + * sysdeps/stub/Makefile.am: + * sysdeps/stub/procopenfiles.c: (glibtop_init_proc_open_files_s), + (glibtop_get_proc_open_files_s): + + New feature by nick@reloco.com.ar (Nicolás Lichtmaier). + + glibtop_get_open_files(pid) -> list of files by process. + TODO: Add documentation. + +2005-01-03 Benoît Dejean + + * examples/pprint.c: (pprint_get_cpu): + * features.def: + * include/glibtop/cpu.h: + * sysdeps/linux/cpu.c: (glibtop_init_cpu_s), (glibtop_get_cpu_s): + Added I/O and IRQ wait time to glibtop_cpu. Closes #160443. + + * configure.in: Post-release bump 2.9.4 + +2004-12-29 Benoît Dejean + + * lib/read_data.c: (glibtop_read_data_l): + * lib/write.c: (glibtop_write_l): Fixed error messages. + Closes #162406. + +2004-12-23 Benoît Dejean + + * include/glibtop/error.h: + * lib/parameter.c: (glibtop_set_parameter_l): + * lib/read_data.c: (glibtop_read_data_l): + * sysdeps/common/error.c: (print_server_name), (glibtop_error_vr), + (glibtop_error_io_vr), (glibtop_warn_vr), (glibtop_warn_io_vr), + (glibtop_error_r), (glibtop_warn_r), (glibtop_error_io_r), + (glibtop_warn_io_r), (glibtop_error), (glibtop_warn), + (glibtop_error_io), (glibtop_warn_io): Turned all macros to functions. + Marked everything as G_GNUC_PRINTF and fixed format bugs. + + * sysdeps/common/fsusage.c: Marked some functions as G_GNUC_INTERNAL + +2004-12-20 Benoît Dejean + + * NEWS: + * configure.in: Released 2.9.3. + +2004-12-10 Benoît Dejean + + * lib/lib.pl: Fixed Argument passing between library and server. + Thanks everyone. Closes #139809. + +2004-12-06 Benoît Dejean + + * acconfig.h: + * configure.in: + * debian/libgtop-dev.files.in: + * doc/Makefile.am: + * examples/Makefile.am: + * examples/third.c: + * include/glibtop/cpu.h: + * include/glibtop/fsusage.h: + * include/glibtop/loadavg.h: + * include/glibtop/mem.h: + * include/glibtop/mountlist.h: + * include/glibtop/msg_limits.h: + * include/glibtop/netlist.h: + * include/glibtop/netload.h: + * include/glibtop/ppp.h: + * include/glibtop/procargs.h: + * include/glibtop/prockernel.h: + * include/glibtop/proclist.h: + * include/glibtop/procmap.h: + * include/glibtop/procmem.h: + * include/glibtop/procsegment.h: + * include/glibtop/procsignal.h: + * include/glibtop/procstate.h: + * include/glibtop/proctime.h: + * include/glibtop/procuid.h: + * include/glibtop/sem_limits.h: + * include/glibtop/shm_limits.h: + * include/glibtop/swap.h: + * include/glibtop/sysdeps.h: + * include/glibtop/uptime.h: + * po/POTFILES.in: + * sysdeps/Makefile.am: + * sysdeps/names/.cvsignore: + * sysdeps/names/Makefile.am: + * sysdeps/names/cpu.c: + * sysdeps/names/fsusage.c: + * sysdeps/names/loadavg.c: + * sysdeps/names/mem.c: + * sysdeps/names/mountlist.c: + * sysdeps/names/msg_limits.c: + * sysdeps/names/netlist.c: + * sysdeps/names/netload.c: + * sysdeps/names/ppp.c: + * sysdeps/names/procargs.c: + * sysdeps/names/prockernel.c: + * sysdeps/names/proclist.c: + * sysdeps/names/procmap.c: + * sysdeps/names/procmem.c: + * sysdeps/names/procsegment.c: + * sysdeps/names/procsignal.c: + * sysdeps/names/procstate.c: + * sysdeps/names/proctime.c: + * sysdeps/names/procuid.c: + * sysdeps/names/sem_limits.c: + * sysdeps/names/shm_limits.c: + * sysdeps/names/swap.c: + * sysdeps/names/sysdeps.c: + * sysdeps/names/uptime.c: Removed libgtop_names :) + +2004-11-30 Benoît Dejean + + * configure.in: post-release bump to 2.9.1. + +2004-11-30 Benoît Dejean + + * NEWS: + * configure.in: released 2.9.0 + +2004-11-22 Benoît Dejean + + * AUTHORS: + * MAINTAINERS: UTF-8-ified. + + * acconfig.h: + * acinclude.m4: + * configure.in: + * kernel/ChangeLog: + * kernel/sysctl/.cvsignore: + * kernel/sysctl/Makefile: + * kernel/sysctl/libgtop.c: + * kernel/sysctl/libgtop.h: + * kernel/sysctl/libgtop_syms.c: + * kernel/sysctl/main.c: + * kernel/sysctl/patch-2.2.1: + * kernel/sysctl/patch-2.2.x: + * kernel/table.h: + * kernel/table20/Makefile: + * kernel/table20/README: + * kernel/table20/entry-i386.S: + * kernel/table20/kernel.patch: + * kernel/table20/main.c: + * kernel/table20/unistd-i386.h: + * kernel/table20/version.h: + * kernel/table21/.cvsignore: + * kernel/table21/Makefile: + * kernel/table21/README: + * kernel/table21/entry-i386.S: + * kernel/table21/main.c: + * kernel/table21/module.c: + * kernel/table21/unistd-i386.h: + * kernel/table21/version.h: + * kernel/version.h: + * libgtop-sysdeps.m4: + * sysdeps/Makefile.am: + * sysdeps/kernel/.cvsignore: + * sysdeps/kernel/ChangeLog: + * sysdeps/kernel/Makefile.am: + * sysdeps/kernel/close.c: + * sysdeps/kernel/cpu.c: + * sysdeps/kernel/glibtop_private.h: + * sysdeps/kernel/glibtop_server.h: + * sysdeps/kernel/kernel.h: + * sysdeps/kernel/kernel.s: + * sysdeps/kernel/loadavg.c: + * sysdeps/kernel/mem.c: + * sysdeps/kernel/msg_limits.c: + * sysdeps/kernel/netload.c: + * sysdeps/kernel/open.c: + * sysdeps/kernel/ppp.c: + * sysdeps/kernel/procargs.c: + * sysdeps/kernel/procdata.c: + * sysdeps/kernel/prockernel.c: + * sysdeps/kernel/proclist.c: + * sysdeps/kernel/procmap.c: + * sysdeps/kernel/procmem.c: + * sysdeps/kernel/procsegment.c: + * sysdeps/kernel/procsignal.c: + * sysdeps/kernel/procstate.c: + * sysdeps/kernel/proctime.c: + * sysdeps/kernel/procuid.c: + * sysdeps/kernel/sem_limits.c: + * sysdeps/kernel/shm_limits.c: + * sysdeps/kernel/siglist.c: + * sysdeps/kernel/swap.c: + * sysdeps/kernel/sysinfo.c: + * sysdeps/kernel/uptime.c: Removed kernel patch and implementation. + +2004-11-18 Benoît Dejean + + * Makefile.am: Forgot to ship libgtopconfig.h. + +2004-11-18 Benoît Dejean + + * LIBGTOP-VERSION: + * libgtop-mirror.sh: Removed unused files. + + * libgtopconfig.h.in: Added. + * Makefile.am: + * configure.in: + * glibtop.h: Added libgtopconfig.h and LIBGTOP_VERSION_CHECK(X, Y, Z). + This can be used in build tests. + +2004-11-15 Benoît Dejean + + * copyright.txt: Added myself. + +2004-11-13 Benoît Dejean + + * include/glibtop/procargs.h: + * sysdeps/common/procargs.c: (glibtop_get_proc_argv_l): Removed SUID + wrappers because glibtop_proc_argv_l is a client-side function that wraps + glibtop_get_proc_args. + +2004-11-13 Benoît Dejean + + * structures.def: Removed old functions. OMG, everything is really broken + here :/ + +2004-11-13 Benoît Dejean + + * configure.in: Bumped to 2.9.0 + + * configure.in: + * examples/.cvsignore: + * examples/Makefile.am: + * examples/netlist.c: (main): + * features.def: + * include/glibtop/Makefile.am: + * include/glibtop/command.h: + * include/glibtop/netlist.h: + * include/glibtop/sysdeps.h: + * include/glibtop/union.h: + * include/glibtop/version.h: + * src/daemon/version.c: + * sysdeps/linux/Makefile.am: + * sysdeps/linux/netlist.c: (glibtop_init_netlist_s), + (glibtop_get_netlist_s): + * sysdeps/names/Makefile.am: + * sysdeps/names/netlist.c: + * sysdeps/solaris/Makefile.am: + * sysdeps/solaris/netlist.c: (glibtop_init_netlist_s), + (glibtop_get_netlist_s): Added new function glibtop_get_netlist(). + Implemented for linux and solaris. Doc needed. + +2004-10-11 Benoît Dejean + + * NEWS: Released 2.8.1. + +2004-10-10 Benoît Dejean + + * lib/init.c: Replaced C99 initializer. + + * lib/read.c: (do_read): 1-line cleanup. + +2004-10-09 Benoît Dejean + + * configure.in: Depends on glib 2.4.0 + +2004-09-25 Benoît Dejean + + * glibtop.h: Added missing include . + +2004-09-22 Benoît Dejean + + * configure.in: CFLAGS: Removed -W, added -Winline. + +2004-09-14 Gora Mohanty + + * configure.in: Added 'or' to ALL_LINGUAS. + +2004-09-13 Benoît Dejean + + * configure.in: bumped to 2.8.1. + + * sysdeps/common/fsusage.c: + * sysdeps/common/gnuslib.c: (glibtop_make_connection), + (connect_to_unix_server), (glibtop_internet_addr): + * sysdeps/linux/glibtop_server.c: (get_pageshift): + * sysdeps/linux/glibtop_server.h: + * sysdeps/linux/open.c: (glibtop_open_s): + * sysdeps/linux/ppp.c: (is_ISDN_on): Cleanups. Thanks to Kjartan Maraas. + Closes #151557. + +2004-09-13 Benoît Dejean + + * NEWS: + * configure.in: 2.8.0 + +2004-08-30 Benoît Dejean + + * NEWS: Released 2.7.92. + +2004-08-28 Benoît Dejean + + * backends/server/command.c: (glibtop_call_i): Zeroed all args. + + * configure.in: Bumped soname (thanks to seb128 and Dodji even if i've + fully understand everything. + + * include/glibtop/array.h: + * include/glibtop/compat_10.h: + * include/glibtop/glib-arrays.h: + * include/glibtop/interfaces.h: + * include/glibtop/proccwd.h: + * lib/glib-arrays.c: + * sysdeps/names/interfaces.c: + * sysdeps/names/proccwd.c: Got rid of never-used / never-implemented files. + +2004-08-28 Akagic Amila + + * configure.in: Added 'bs' to ALL_LINGUAS. + +2004-08-22 Benoît Dejean + + * lib/command.c: (glibtop_call_l): Zeroed all args. + +2004-08-21 Kjartan Maraas + + * configure.in: Add «nb» to ALL_LINGUAS. + +2004-08-15 Benoît Dejean + + * NEWS: + * configure.in: LibGTop 2.7.91. + +2004-08-09 Benoît Dejean + + * configure.in: Added HAVE_IFADDRS_H + * sysdeps/linux/netload.c: (glibtop_get_netload_s): Disable IPv6 + support is ifaddrs.h is not available. + + Closes #149376. + +2004-08-09 Benoît Dejean + + * configure.in: Added -gnu89 to CFLAGS. + + * examples/Makefile.am: Fixed LDFLAGS. + + * sysdeps/common/fsusage.c: (glibtop_get_fsusage_s): + * sysdeps/linux/fsusage.c: (linux_2_6_0): + * sysdeps/linux/proctime.c: (glibtop_get_proc_time_s): + * sysdeps/linux/sysinfo.c: (init_sysinfo): Fixed C89 issues. + + Closes #149375. + +2004-08-03 Benoît Dejean + + * NEWS: + * configure.in: LibGTop 2.7.90. + +2004-07-20 Benoît Dejean + + * configure.in: LibGTop 2.7.5. + +2004-07-20 Benoît Dejean + + * NEWS: + * configure.in: Released LibGTop 2.7.4. + +2004-07-18 Benoît Dejean + + * doc/reference.texi: + * include/glibtop/command.h: + * include/glibtop/glib-arrays.h: + * include/glibtop/proclist.h: + * lib/glib-arrays.c: (glibtop_get_proclist_as_array_l): + * lib/lib.pl: + * scripts/c_types.pl: + * src/daemon/main.c: (handle_parent_connection): + * src/daemon/slave.c: (handle_slave_connection): + * support/mkstemp.c: + * sysdeps/aix/proclist.c: (glibtop_get_proclist_s): + * sysdeps/freebsd/cpu.c: (glibtop_get_cpu_p): + * sysdeps/freebsd/prockernel.c: (glibtop_get_proc_kernel_p): + * sysdeps/freebsd/proclist.c: (glibtop_get_proclist_p): + * sysdeps/freebsd/procmem.c: (glibtop_get_proc_mem_p): + * sysdeps/kernel/proclist.c: (glibtop_get_proclist_s): + * sysdeps/linux/proclist.c: (glibtop_get_proclist_s): + * sysdeps/osf1/proclist.c: (glibtop_get_proclist_p): + * sysdeps/solaris/proclist.c: (glibtop_get_proclist_s): + * sysdeps/stub/proclist.c: (glibtop_get_proclist_s): + * sysdeps/stub_suid/proclist.c: (glibtop_get_proclist_p): + * sysdeps/sun4/proclist.c: (glibtop_get_proclist_p): Glibify a bit more. + Closes #147618. + +2004-07-17 Benoît Dejean + + * include/glibtop/fsusage.h: Added read, write. This members provides + total read and write in bytes since boot_time. + + * include/glibtop/netload.h: Added hwaddress : provides harware address, + eg MAC address. mtu, address and subnet are now guint32. + +2004-07-15 Benoît Dejean + + * include/glibtop/procstate.h: Added GLIBTOP_PROCESS_DEAD constant. + +2004-07-07 Benoît Dejean + + * include/glibtop/procargs.h: Added new glibtop_get_proc_argv*() functions. + These are more easier to use than glibtop_get_proc_args*(). They return + a NULL-terminated array of string (like main's char* argv[]). + +2004-07-07 Benoît Dejean + + * include/glibtop/netinfo.h: + * structures.def: + * sysdeps/names/netinfo.c: Removed netinfo.[ch] that were never used. + +2004-07-03 Benoît Dejean + + * sysdeps/names/fsusage.c: Added missing fsusage names. + +2004-07-03 Benoît Dejean + + * glibtop.h: Moved foward declaration of glibtop to break circular + #includes dependencies. + +2004-06-18 Benoît Dejean + + * include/glibtop/error.h: Also tries C99 __VA_ARGS__ before using + functions. + + * include/glibtop/error.h: Moved 8 static error functions to + sysdeps/common/error.c. This is the end of an big useless code + bloat : expect ~8KB of object size reduction. + + * include/glibtop/procuid.h: s/int/gint32/g + + * lib/errors.c: (glibtop_error_quark): + * lib/read.c: (do_read), (glibtop_read_l): + * lib/read_data.c: (glibtop_read_data_l): Minor cleanups. + + * sysdeps/names/netload.c: + * include/glibtop/netload.h: Added IPv6 feature : provides address, + prefix and scope. This breaks the ABI. Not documented yet : check + this file. + +2004-06-13 Benoît Dejean + + * include/glibtop/sysinfo.h: Changed get_sysinfo prototype so that it + returns a const pointer. Added missing macro. + +2004-06-12 Benoît Dejean + + * include/glibtop/fsusage.h: block_size is now defined as a guint32 + instead of a fuzzy gint. + + * lib/sysdeps.c: (glibtop_get_sysdeps_r): Small cleanup. + + * lib/init.c: Added missing initializer. + +2004-06-09 Benoît Dejean + + * *.{c,h} : whitespace clean up. + +2004-06-07 Benoît Dejean + + * lib/parameter.c: + * support/popt.c: (poptGetContext): Cleaned. + + * support/vsnprintf.c: s/strncpy/g_strlcpy + +2004-05-28 Benoît Dejean + + * examples/*: Added missing #include. + * ChangeLog: Converted to UTF-8. + +2004-04-16 Iñaki Larrañaga + + * configure.in: Added "eu" (Basque) to ALL_LINGUAS. + +2004-04-09 Guntupalli Karunakar + + * configure.in: Added "gu" (Gujarati) to ALL_LINGUAS. + +2004-04-07 Bastien Nocera + + * configure.in: version 2.6.0 + +2004-04-07 Bastien Nocera + + * include/glibtop/fsusage.h: fix typo in the #defines for + FSUSAGE_BLOCK_SIZE (patch by Benoît Dejean ) + +2004-03-30 Adam Weinberger + + * configure.in: Added en_CA (Canadian English) to ALL_LINGUAS. + +2004-03-22 Gareth Owen + + * configure.in: Added en_GB to ALL_LINGUAS + +2004-03-22 Guntupalli Karunakar + + * configure.in: Added "pa" (Punjabi) to ALL_LINGUAS. + +2004-03-15 Bastien Nocera + + * include/glibtop/fsusage.h: set GLIBTOP_MAX_FSUSAGE properly, + use gint in the headers instead of int (Closes: #125049) + +2004-03-11 Kjartan Maraas + + * configure.in: Up versions etc. + * po/am.po: Update foo. + * po/ar.po: + * po/az.po: + * po/be.po: + * po/bg.po: + * po/bn.po: + * po/ca.po: + * po/cs.po: + * po/cy.po: + * po/da.po: + * po/de.po: + * po/el.po: + * po/es.po: + * po/et.po: + * po/fa.po: + * po/fi.po: + * po/fr.po: + * po/ga.po: + * po/gl.po: + * po/he.po: + * po/hi.po: + * po/hr.po: + * po/hu.po: + * po/id.po: + * po/it.po: + * po/ja.po: + * po/ko.po: + * po/lt.po: + * po/lv.po: + * po/mk.po: + * po/ml.po: + * po/mn.po: + * po/ms.po: + * po/nl.po: + * po/nn.po: + * po/no.po: + * po/pl.po: + * po/pt.po: + * po/pt_BR.po: + * po/ro.po: + * po/ru.po: + * po/sk.po: + * po/sl.po: + * po/sq.po: + * po/sr.po: + * po/sr@Latn.po: + * po/sv.po: + * po/ta.po: + * po/tr.po: + * po/uk.po: + * po/vi.po: + * po/zh_CN.po: + * po/zh_TW.po: + +2004-03-11 Bastien Nocera + + * NEWS: update the NEWS file for the release + +2004-03-11 Bastien Nocera + + * include/Makefile.am: fix distchecking + +2003-12-27 Ole Laursen + + * include/glibtop/fsusage.h: Added block_size field. (Closes: #125049) + +2004-03-05 Bastien Nocera + + * include/glibtop/procmap.h: patch by Benoît Dejean + to break the API, I mean, to make it easier to generate Python bindings + (Closes: #129701) + +2004-03-04 Bastien Nocera + + * configure.in: + * include/libgtop-i18n.h: + * lib/lib.pl: + * lib/read.c: + * lib/read_data.c: + * lib/write.c: + * sysdeps/names/cpu.c: + * sysdeps/names/fsusage.c: + * sysdeps/names/loadavg.c: + * sysdeps/names/mem.c: + * sysdeps/names/mountlist.c: + * sysdeps/names/msg_limits.c: + * sysdeps/names/netload.c: + * sysdeps/names/ppp.c: + * sysdeps/names/procargs.c: + * sysdeps/names/prockernel.c: + * sysdeps/names/proclist.c: + * sysdeps/names/procmap.c: + * sysdeps/names/procmem.c: + * sysdeps/names/procsegment.c: + * sysdeps/names/procsignal.c: + * sysdeps/names/procstate.c: + * sysdeps/names/proctime.c: + * sysdeps/names/procuid.c: + * sysdeps/names/sem_limits.c: + * sysdeps/names/shm_limits.c: + * sysdeps/names/swap.c: + * sysdeps/names/sysdeps.c: + * sysdeps/names/uptime.c: remove dependency on libgnome, + check for linux/isdn.h for distros using the 2.6 kernel headers + +2004-02-07 Kevin Vandersloot + + * configure.in: release 2.5.1 + +2004-02-02 Sebastien Bacher + + * sysdeps/linux/mem.c: (glibtop_get_mem_s): patch from + Benoît Dejean to fix libtop_mem.used + and glibtop_mem.shared values (Closes: #129863). + +Wed Jan 7 02:23:28 2004 Jonathan Blandford + + * libgtop-2.0.pc.in: Should be -lgtop-2.0, #130506 + +2004-01-05 Frederic Crozat + + * libgtop.spec.in: License is GPL, not LGPL. + +2004-01-05 Malcolm Tredinnick + + * libgtop-2.0.pc.in: Include -lgtop in the linking flags. + Bug #130506. + +2004-01-03 Robert Sedak + + * configure.in: Added "hr" in ALL_LINGUAS. + +2003-12-22 Bastien Nocera + + * acinclude.m4: + * configure.in: remove linking to libgtop and checks for 64-bit + integer bytes (fixes warning on build on glib 2.0 systems) + +2003-11-02 Ćœygimantas Beručka + + * configure.in: Added "lt" to ALL_LINGUAS. + +2003-10-21 Bastien Nocera + + * Makefile.am: + * configure.in: + * src/inodedb/.cvsignore: + * sysdeps/names/Makefile.am: + install only one library, libgtop-2.0 + Fix build-time warnings due to the redefinition of guint64 + +2003-10-20 Bastien Nocera + + * lib/read.c: (glibtop_read_l): + * lib/read_data.c: (glibtop_read_data_l): + * lib/write.c: (glibtop_write_l): apply patch for ngettext support + by Christian Neumair + +2003-10-20 Bastien Nocera + + * include/glibtop/cpu.h: + * include/glibtop/procstate.h: + * include/glibtop/procuid.h: + * include/glibtop/uptime.h: + * lib/sysdeps.c: + * sysdeps/names/cpu.c: + * sysdeps/names/procstate.c: + * sysdeps/names/procuid.c: + * sysdeps/names/uptime.c: Apply patch by the_h1ghlander@yahoo.com and + Cory Omand for Solaris support + +2003-10-20 Bastien Nocera + + * src/inodedb/Makefile.am: link to libgtop_suid_common-2.0.la + (Closes: #107990) + +2003-10-20 Bastien Nocera + + * acconfig.h: + * acinclude.m4: + * include/glibtop/array.h: + * include/glibtop/command.h: + * include/glibtop/cpu.h: + * include/glibtop/fsusage.h: + * include/glibtop/glibtop-backend-info.h: + * include/glibtop/glibtop-backend.h: + * include/glibtop/glibtop-client.h: + * include/glibtop/inodedb.h: + * include/glibtop/interfaces.h: + * include/glibtop/limits.h: + * include/glibtop/loadavg.h: + * include/glibtop/mem.h: + * include/glibtop/mountlist.h: + * include/glibtop/msg_limits.h: + * include/glibtop/netinfo.h: + * include/glibtop/netload.h: + * include/glibtop/ppp.h: + * include/glibtop/procargs.h: + * include/glibtop/proccwd.h: + * include/glibtop/prockernel.h: + * include/glibtop/proclist.h: + * include/glibtop/procmap.h: + * include/glibtop/procmem.h: + * include/glibtop/procsegment.h: + * include/glibtop/procsignal.h: + * include/glibtop/procstate.h: + * include/glibtop/proctime.h: + * include/glibtop/procuid.h: + * include/glibtop/sem_limits.h: + * include/glibtop/shm_limits.h: + * include/glibtop/swap.h: + * include/glibtop/sysdeps.h: + * include/glibtop/sysinfo.h: + * include/glibtop/uptime.h: + * lib/glibtop-backend.c: (glibtop_backend_get): + * lib/glibtop-client.c: (glibtop_client_open_backend): + * lib/inodedb.c: (glibtop_inodedb_lookup_s): + * lib/lib.pl: + * src/inodedb/README.inodedb: + * src/inodedb/mkinodedb2.c: (main): s/u_int64_t/guint64/ + +2003-10-20 Bastien Nocera + + * Makefile.am: fix distchecking, release 2.5.0 + +2003-10-20 Bastien Nocera + + * configure.in: fix the library versioning to be hand-made rather + than uber-calculated from some esoteric numbers + +2003-10-20 Bastien Nocera + + * glibtop.h: + * include/glibtop/close.h: + * include/glibtop/command.h: + * include/glibtop/cpu.h: + * include/glibtop/error.h: + * include/glibtop/fsusage.h: + * include/glibtop/global.h: + * include/glibtop/inodedb.h: + * include/glibtop/loadavg.h: + * include/glibtop/mem.h: + * include/glibtop/mountlist.h: + * include/glibtop/msg_limits.h: + * include/glibtop/netload.h: + * include/glibtop/open.h: + * include/glibtop/parameter.h: + * include/glibtop/ppp.h: + * include/glibtop/procargs.h: + * include/glibtop/prockernel.h: + * include/glibtop/proclist.h: + * include/glibtop/procmap.h: + * include/glibtop/procmem.h: + * include/glibtop/procsegment.h: + * include/glibtop/procsignal.h: + * include/glibtop/procstate.h: + * include/glibtop/proctime.h: + * include/glibtop/procuid.h: + * include/glibtop/read.h: + * include/glibtop/read_data.h: + * include/glibtop/sem_limits.h: + * include/glibtop/shm_limits.h: + * include/glibtop/signal.h: + * include/glibtop/swap.h: + * include/glibtop/sysdeps.h: + * include/glibtop/sysinfo.h: + * include/glibtop/types.h: + * include/glibtop/union.h: + * include/glibtop/uptime.h: + * include/glibtop/version.h: + * include/glibtop/write.h: + * lib/Makefile.am: + * lib/command.c: (glibtop_call_l): + * lib/init.c: + * lib/inodedb.c: + * lib/lib.pl: + * lib/open.c: + * lib/read.c: + * lib/read_data.c: (glibtop_read_data_l): + * lib/structures.pl: + * lib/write.c: + * sysdeps/names/cpu.c: + * sysdeps/names/fsusage.c: + * sysdeps/names/loadavg.c: + * sysdeps/names/mem.c: + * sysdeps/names/mountlist.c: + * sysdeps/names/msg_limits.c: + * sysdeps/names/netinfo.c: + * sysdeps/names/netload.c: + * sysdeps/names/ppp.c: + * sysdeps/names/procargs.c: + * sysdeps/names/proccwd.c: + * sysdeps/names/prockernel.c: + * sysdeps/names/proclist.c: + * sysdeps/names/procmap.c: + * sysdeps/names/procmem.c: + * sysdeps/names/procsegment.c: + * sysdeps/names/procsignal.c: + * sysdeps/names/procstate.c: + * sysdeps/names/proctime.c: + * sysdeps/names/procuid.c: + * sysdeps/names/sem_limits.c: + * sysdeps/names/shm_limits.c: + * sysdeps/names/swap.c: + * sysdeps/names/sysdeps.c: + * sysdeps/names/uptime.c: fixed compilation + +2003-10-20 Bastien Nocera + + * RELNOTES-0.25: removed + * RELNOTES-1.0: removed + * RELNOTES-1.0.x: removed + * RELNOTES-1.1.x: removed + * include/glibtop/Makefile.am: + * include/glibtop/xmalloc.h: removed xmalloc.h + * lib/command.c: (glibtop_call_l): + * lib/init.c: (_init_server): + * lib/inodedb.c: (glibtop_inodedb_open_s), + (glibtop_inodedb_close_s): + * lib/read_data.c: (glibtop_read_data_l): + * lib/xmalloc.c: removed xmalloc.h + replace all the xmalloc crap by glib memory management functions + +2003-10-20 Bastien Nocera + + * lib/Makefile.am: + * libgtop-config.in: + * libgtop.spec.in: + * libgtopConf.sh.in: + * src/inodedb/Makefile.am: removed traces of guile, intllibs and + libgnomesupport + +2003-10-20 Bastien Nocera + + * .cvsignore: updated + * configure.in: removed all traces of guile stuff + * sysdeps/guile/.cvsignore: removed + +2003-10-20 Bastien Nocera + + * sysdeps/Makefile.am: + * sysdeps/guile/ChangeLog: + * sysdeps/guile/Makefile.am: + * sysdeps/guile/guile.pl: + * sysdeps/guile/names/.cvsignore: + * sysdeps/guile/names/Makefile.am: + * sysdeps/guile/names/guile-names.pl: removed guile + +2003-10-20 Bastien Nocera + + * Makefile.am: + * configure.in: remove guile and libgnome-support stuff + +2003-10-20 Bastien Nocera + + * configure.in: make it compile + +2003-10-19 Carlos PerellĂł MarĂ­n + + * support/*: Reverted libgtop changes. It's a common module + and I should not modify it. + * Added/removed files. Now the move should be done. + +2003-10-19 Carlos PerellĂł MarĂ­n + + * libgtop-GNOME-2-0-branch moved to HEAD. + +2003-09-30 Laurent Dhima + + * configure.in: Added "sq" to ALL_LINGUAS. + +2003-09-17 Fatih Demir + + * configure.in: Added "ta" (Tamil) to the languages' list. + +2003-09-13 Carlos PerellĂł MarĂ­n + + * configure.in (ALL_LINGUAS): Removed es_ES. + +2003-09-08 Kevin Vandersloot + + * configure.in: release 2.0.5 + +2003-09-06 Taneem Ahmed + + * configure.in: Added "bn" to ALL_LINGUAS. + +2003-08-24 Kevin Vandersloot + + * configure.in: release 2.0.4 + +2003-08-13 Guntupalli Karunakar + + * configure.in: Added "hi" (Hindi) in ALL_LINGUAS. + +2003-08-13 Andrew Sobala + + * configure.in: release 2.0.3 + +2003-08-09 Dafydd Harries + + * configure.in: Added "cy" (Welsh) to ALL_LINGUAS. + +2003-08-03 Malcolm Tredinnick + + * Makefile.am: Change subdirectory build order so that + 'distclean' target work (and other targets remain working). + Fixes bug #84622. + +2003-06-10 Kjartan Maraas + + * libgtop-2.0.pc.in: Fix missing build flags. Patch from + Julio Merino. Fixes bug #103086. + * sysdeps/linux/mem.c: (glibtop_get_mem_s): Fix memory calculation + under Linux. Patch from . Fixes bug #68626. + +2003-06-10 Kjartan Maraas + + * sysdeps/freebsd/glibtop_machine.h: + * sysdeps/kernel/glibtop_private.h: + * sysdeps/solaris/glibtop_machine.h: + * sysdeps/solaris/glibtop_private.h: Comment out text after + #endif to make some compilers happy. + +2003-05-11 Andrew Sobala + + * configure.in: release 2.0.2 + +2003-05-10 Danilo Ć egan + + * configure.in: Added "sr" and "sr@Latn" to ALL_LINGUAS. + +2003-04-17 Abel Cheung + + * configure.in: Added "mk" to ALL_LINGUAS. + +2003-03-13 Christian Rose + + * configure.in: Added "ml" to ALL_LINGUAS. + +2003-03-10 Roozbeh Pournader + + * configure.in: Added "fa" to ALL_LINGUAS. + +2003-03-08 Gil "Dolfin" Osher + + * configure.in: Added he to ALL_LINGUAS. + +2003-02-25 T?”ivo Leedj?€rv + + * configure.in: Added et to ALL_LINGUAS. + +2003-02-16 Mohammad DAMT + + * po/id.po: Added Indonesian translation + * configure.in: Added "id" to ALL_LINGUAS + +2003-01-31 James Henstridge + + * acinclude.m4 (GNOME_SUPPORT_CHECKS): use AC_LIBOBJ() to set + LIBOBJS variable, since newer autoconf's barf on direct access. + This also takes care of setting LTLIBOBJS for us. + +2003-01-29 Abel Cheung + + * configure.in: Added ar to ALL_LINGUAS + +2003-01-25 Alessio Frusciante + + * configure.in: Added "it" (Italian) to ALL_LINGUAS. + +2003-01-23 Marius Andreiana + + * configure.in: Added "ro" to ALL_LINGUAS + +2003-01-22 Christian Rose + + * configure.in: Added "mn" to ALL_LINGUAS. + +2003-01-16 Daniel Yacob + + * configure.in: added am to ALL_LINGUAS + +2003-01-12 Kevin Vandersloot + + * configure.in: release 2.0.1 + +2002-12-30 Bastien Nocera + + * Added sysdeps/aix directory that was missing + +2002-10-08 Laurent Vivier + + * Framework for AIX support + +2002-08-07 Vincent Berger + + * support/: Add alloca management for AIX + * configure.in: correct checking for nm + +2002-11-03 Dmitry G. Mastrukov + + * configure.in: Added Belarusian to ALL_LINGUAS + +2002-09-26 Stanislav Brabec + + * configure.in: Added cs to ALL_LINGUAS. + +2002-09-26 jacob berkman + + * configure.in (ALL_LINGUAS): remove cs until the file actually + gets added + +2002-09-26 Stanislav Brabec + + * configure.in: Added cs to ALL_LINGUAS. + +2002-08-20 Peteris Krisjanis + + * configure.in: (ALL_LINGUAS) Added Latvian (lv). + +2002-06-25 Yanko Kaneti + + * configure.in: (ALL_LINGUAS) Added Bulgarian (bg). + +2002-05-10 Kevin Vandersloot + + * configure.in: release 2.0.0 + +2002-05-28 Carlos Perello Marin + + * configure.in (ALL_LINGUAS): Removed all es_* and added only es_ES. + +2002-05-08 Pablo Saratxaga + + * configure.in: Added Vietnamese (vi) to ALL_LINGUAS + +2002-03-12 James Henstridge + + * acinclude.m4 (LIBGTOP_HEACKER_TESTS): AM_CONDITIONAL() + statements can't be conditionally executed (automake compat fix). + (GNOME_LIBGTOP_SYSDEPS): move the conditional here so that it is + always executed. + +2002-02-10 Kevin Vandersloot + + * configure.in: bump version + + * release 1.90.2 + +2002-02-09 Bastien Nocera + + reviewed by: Kevin Vandersloot + + * configure.in: remove need for dc, and clean up + * stamp-h.in, .cvsignore: remove + +2002-02-05 Abel Cheung + + * configure.in (ALL_LINGUAS): zh_CN.GB2312 -> zh_CN + +2001-01-14 Hasbullah bin Pit + + * configure.in: Added ms in ALL_LINGUAS. + * po/ms.po: Added Malay Translation. + * po/.cvsignore: Added 'libgtop-2.0.pot'. + +2001-01-14 Abel Cheung + + * configure.in: Sync'ed ALL_LINGUAS with files in po directory, + and renamed GETTEXT_PACKAGE to avoid conflict with libgtop 1.0.x. + +2002-01-10 Kevin Vandersloot + + * acininclude.m4: add back the support stuf but make it really + work + + * configure.in: bump version number, add back GNOME_SUPPORT + check since that was causing a build failure + + * release 1.90.1 + +2002-01-09 Kevin Vandersloot + + * acinclude.m4: remove gnome support check. Fixes the build + for those with automake < 1.4p5. + + * configure.in: remove check for GNOME_SUPPORT + +2001-14-27 Miles Lane + + * acconfig.h: Added "#undef HAVE_GETTEXT" entry. + * LIBGTOP_VERSION: Removed file. + * configure.in: added glib-gettextize support and + moved in the *VERSION* stuff from LIBGTOP_VERSION. + +2001-11-27 Kevin Vandersloot + + * acinclude.m4: copy some of the macros that were formerly + in gnome-macros + + * configure.in, sysdeps/Makefile.am: comment out guile + support for now. + + * release 1.90.0 + +2001-11-26 Kevin Vandersloot + + * src/daemon/gnuserv.c: Apply patch fixing security issue from + intexxia labs - #1048-261101 + +2001-11-26 Abel Cheung + + * src/inodedb/file_by_inode.c: Rename to file_by_inode2.c + * src/inodedb/mkinodedb.c: Rename to mkinodedb2.c + + * po/POTFILES.in: Reflect above change + + * */.cvsignore: Add various files + +2001-11-25 Kevin Vandersloot + + * port stable libgtop to GNOME 2.0. Too much to detail. + pkgconfig is now used. Libs are named libgtop-2.0 etc for + parallel install. + +2001-10-17 Abel Chueng + + * configure.in, Makefile.am, include/glibtop/Makefile.am: headers + moved to $(includedir)/libgtop-1.0/glibtop. + +2001-09-16 Abel Chueng + + * configure.in: Added "zh_TW" to ALL_LINGUAS. + +2001-02-13 Martin Baulig + + Released LibGTop 1.0.12 "Gerolzhofen". + + * NEWS: Added news entry to 1.0.12. + + * LIBGTOP-VERSION: Set version number to 1.0.12, binary age 11, + interface age 11. + +2001-02-19 Simos Xenitellis + + * configure.in: Added "el" to ALL_LINGUAS. + +2001-02-15 Martin Baulig + + Released LibGTop 1.0.11 "Jasmin". + + * NEWS: Added news entry for 1.0.11. + +2001-02-14 Martin Baulig + + Merged from LIBGTOP_1_1_2_PATCHES. + + * libgtop-sysdeps.m4 (GLIBTOP_SOLARIS_RELEASE): Define this on Solaris; + we use version codes like 270 for SunOS 5.7 and 251 for SunOS 2.5.1. + + * LIBGTOP-VERSION (LIBGTOP_VERSION_SUFFIX): Added this so you can + have your tarballs called `libgtop-1.x.y-snap.tar.gz' or whatever. + This only affects the `VERSION' variable and thus how the resulting + tarball will be called, but not `LIBGTOP_VERSION_CODE' etc. + + * configure.in, acconfig.h: Added checks for + and + + * configure.in (DL_LIB): Check for dlopen() and AC_SUBST this. + + * Makefile.am: Make `aclocal.m4' also depend on `LIBGTOP-VERSION' + when in maintainer-mode. + +2001-02-14 Martin Baulig + + * include/glibtop/limits.h: Removed; this file doesn't exist + in the stable branch. + +2001-02-13 Martin Baulig + + * LIBGTOP-VERSION: Set version number to 1.0.11, binary age 10, + interface age 10. + +2001-02-13 Stanislav Visnovsky + + * configure.in: Added sk to ALL_LINGUAS + +2001-02-08 Gustavo Maciel Dias Vieira + + * configure.in (ALL_LINGUAS): Added pt_BR to ALL_LINGUAS. + +2000-11-21 Martin Baulig + + * libgtop-config.h.in: Added `--cflags', `--libs' and `--extra-libs' + parameters. + +2000-11-20 Martin Baulig + + Released LibGTop 1.0.10 "November Rain". + + * LIBGTOP-VERSION: Set version number to 1.0.10, binary age 9, + interface age 9. + +2000-05-25 Martin Baulig + + Released LibGTop 1.0.9 "Stuttgart". + + * LIBGTOP-VERSION: Set version number to 1.0.9 binary age 8, + interface age 8. + + (LibGTop 1.0.8 "Frankfurt" was not publically released.) + +2000-02-20 Martin Baulig + + * LIBGTOP-VERSION: Set version number to 1.0.8 binary age 7, + interface age 7. + +2000-02-15 Martin Baulig + + Released LibGTop 1.0.7 "Copenhagen". + +1999-10-19 Martin Baulig + + * LIBGTOP-VERSION: Set version number to 1.0.7 binary age 6, + interface age 6. + +1999-10-18 Martin Baulig + + Released LibGTop 1.0.6 "October LibGTop". + +1999-10-18 Martin Baulig + + * NEWS.old: Removed obsolete file. + + * RELNOTES-1.0.x: Added release notes for LibGTop 1.0.6. + + * TODO: Removed obsolete file. + + * NEWS: We start maintaining a NEWS file now :) + +1999-10-16 Martin Baulig + + * LIBGTOP-VERSION: Set version number to 1.0.6 binary age 5, + interface age 5. + +1999-10-09 Jesus Bravo Alvarez + + * configure.in (ALL_LINGUAS): Added Galician (gl) + +1999-09-29 Martin Baulig + + Released LibGTop 1.0.5. + +1999-09-29 Martin Baulig + + * configure.in (libgtop_top_builddir): AC_SUBST this. + +1999-09-24 Martin Baulig + + * LIBGTOP-VERSION: Set version number to 1.0.5 binary age 4, + interface age 4. + +1999-09-24 Martin Baulig + + Released LibGTop 1.0.4. + +1999-09-22 Kjartan Maraas + + * configure.in: Added "da" to ALL_LINGUAS. + +1999-09-19 Martin Baulig + + * libgtopConf.sh.in: Added MODULE_VERSION on Miguel's + request (set it to "libgtop-@LIBGTOP_VERSION@"). + +1999-09-18 Pablo Saratxaga + + * configure.in, po/*.po: merged *.po files from HEAD CVS + +1999-09-17 Martin Baulig + + * configure.in: Make it work if we have GNOME and the user + gave use --without-gnome (fixes bug #1735). + +1999-09-17 Martin Baulig + + * LIBGTOP-VERSION: Set version number to 1.0.4 binary age 3, + interface age 3. + +1999-09-16 Martin Baulig + + Merged everything since May 31 from HEAD and released + LibGTop 1.0.3. + +1999-07-29 Martin Baulig + + * include/glibtop/error.h: Use G_GNUC_UNUSED. + + * configure.in (ENABLE_STATIC, ENABLE_SHARED): New automake + conditionals. + +1999-07-11 Tomas Ogren + + * configure.in: Added sv to ALL_LINGUAS + +1999-07-11 Tomas Ogren + + * sysdeps/names/procmem.c: Fixed a tyop + +1999-05-31 Martin Baulig + + * LIBGTOP-VERSION: Set version number to 1.0.3 binary age 2, + interface age 2. + +1999-05-31 Martin Baulig + + Released LibGTop 1.0.2. + +1999-05-26 Martin Baulig + + * configure.in (INCLUDES): Define `LIBGTOP_VERSION_CODE' here so we + can use version conditionals in the sysdeps code. + +1999-05-25 Martin Baulig + + * libgtop-sysdeps.m4: Make the I4B check work for NetBSD. + +1999-05-16 Martin Baulig + + * doc: Merged the LibGTop Manual from the HEAD. + +1999-03-01 Martin Baulig + + Released LibGTop 1.0.1. + + * LIBGTOP-VERSION: Set version number to 1.0.1 binary age 0, + interface age 0. + +1999-03-01 Martin Baulig + + * configure.in (LIBGTOP_LIBS): Move `-lgtop_common' last to + make it work with static-only libs. Thanks to Roderik Muit + for pointing this out. + (PERL): First check for `perl5', then for `perl'. Thanks again + to Roderik Muit. + +1999-02-24 Martin Baulig + + Released LibGTop 1.0.0. + + * LIBGTOP-VERSION: Set version number to 1.0.0 binary age 0, + interface age 0. + + * configure.in: Require GLIB >= 1.2.0. + +1999-02-23 Martin Baulig + + Released LibGTop 0.100.0. + + Make the copyright of LibGTop be the GNU General Public License. + + * LIBGTOP-VERSION: Set version number to 0.100.0 binary age 0, + interface age 0. + + * copyright.txt: Set the year to 1998-99 and pretty-format it a + little bit. Same in all C source and header files. + +1999-02-21 Martin Baulig + + * configure.in (LIBGTOP_*_INCS): Define `HAVE_GLIBTOP_MACHINE_H' + if appropriate. + +1999-02-19 Martin Baulig + + Released LibGTop 0.99.9. + + * LIBGTOP-VERSION: Set version number to 0.99.9 binary age 0, + interface age 0. + + * include/glibtop/error.h: Don't include . + * sysdeps/common/error.c: Use `int' not `gint'. + + * misc/porting-libgtop.txt: Added a few instructions on how + to port LibGTop to Solaris. + + * Replace all __BEGIN_DELCS with LIBGTOP_BEGIN_DECLS and all + __END_DECLS with LIBGTOP_END_DECLS; remove all __P macros and + use real function prototypes. + +1999-02-18 Martin Baulig + + * include/glibtop/*.h: Use glib-like function prototypes + instead of "extern __P((args))". + + * sysdeps/common/error.h: Replaced inline with static. + +1999-02-18 Martin Baulig + + * */*.awk: Replaced all awk scripts with perl scripts since it is + more likely that people have a working perl interpreter than GNU + awk on their system. + +1999-02-18 Martin Baulig + + * sysdeps/common/error.c (glibtop_error_r, glibtop_warn_r): Define + them as G_INLINE_FUNC in if possible. + (glibtop_error_io_r, glibtop_warn_io_r): Likewise. + (glibtop_error_vr, glibtop_warn_vr): New functions taking a va_list. + (glibtop_error_io_vr, glibtop_warn_io_vr): New functions taking an + errno an a va_list. + +1999-02-17 Martin Baulig + + Released LibGTop 0.99.8. + +1999-02-16 Martin Baulig + + * examples/Makefile.am, lib/Makefile.am, src/daemon/Makefile.am, + sysdeps/common/Makefile.am, sysdeps/guile/Makefile.am, + sysdeps/guile/names/Makefile.am, sysdeps/kernel/Makefile.am, + sysdeps/linux/Makefile.am, sysdeps/names/Makefile.am, + sysdeps/osf1/Makefile.am, sysdeps/stub/Makefile.am, + sysdeps/stub_suid/Makefile.am, sysdeps/sun4/Makefile.am: + Initialize INCLUDES to `@INCLUDES@' to make it clear that it is + set in configure.in. It is ok to add things there, but you must + not remove the `@INCLUDES@'. + +1999-02-15 Jeff Garzik + + * examples/Makefile.am, lib/Makefile.am, src/daemon/Makefile.am, + sysdeps/common/Makefile.am, sysdeps/guile/Makefile.am, + sysdeps/guile/names/Makefile.am, sysdeps/kernel/Makefile.am, + sysdeps/linux/Makefile.am, sysdeps/names/Makefile.am, + sysdeps/osf1/Makefile.am, sysdeps/stub/Makefile.am, + sysdeps/stub_suid/Makefile.am, sysdeps/sun4/Makefile.am: + Removed hardcoded gcc arguments from CFLAGS. + + * include/glibtop/error.h: + Added FIXME comment about varargs macros breaking Sun cc + compilation. + +1999-02-12 Martin Baulig + + Thanks to Frederic Devernay for pointing out that we need to define + __BEGIN_DECLS and __END_DECLS when not using GNOME. + + * configure.in: Define `WITHOUT_GNOME' if appropriate. + + * include/glibtop/global.h: Define __BEGIN_DECLS and __END_DECLS + when WITHOUT_GNOME not when _IN_LIBGTOP. + +1999-02-12 Martin Baulig + + * include/glibtop/global.h: Applied patch from Frederic Devernay; + __BEGIN_DECLS and __END_DECLS are only defined inside _IN_LIBGTOP. + +1999-02-10 Martin Baulig + + * configure.in (program_invocation_name): Check whether we need + to declare this; some libc5 systems define that symbol but do + not declare it in any header file. + +1999-02-10 Martin Baulig + + * libgtop.spec.in, libgtop.spec: Replaced libgtop.spec with + with libgtop.spec.in, so libgtop.spec is now a generated file. + +1999-02-05 Martin Baulig + + * include/glibtop/global.h: Enclose some of the stuff in this + file in `#ifdef _IN_LIBGTOP'. + +1999-02-04 Martin Baulig + + * include/glibtop/global.h (_): Use dgettext (), not gettext (). + +1999-01-23 Martin Baulig + + * libgtopConf.sh.in (LIBGTOP_DATADIR): New variable. + +1999-01-06 Martin Baulig + + * libgtop-sysdeps.m4: Always enable SMP support for Linux. + +1999-01-03 Martin Baulig + + Released LibGTop 0.99.2. + +1999-01-05 Martin Baulig + + * libgtop.spec: Always build SMP support; binary packages should + contain all possible features. + + * configure.in: LibGTop will now require GLIB >= 1.1.12. + +1999-01-05 Martin Baulig + + * configure.in: Make it abort if the `dc' utility is not installed. + +1999-01-03 Martin Baulig + + Released LibGTop 0.99.1. + +1998-12-25 Martin Baulig + + * configure.in (LIBGTOP_INCS): Define `HAVE_LIBGTOP_SMP' if SMP + support was enabled. + +1998-12-22 Yukihiro Nakai + + * configure.in (ALL_LINGUAS): Added `ja'. + +1998-12-18 Martin Baulig + + * Makefile.am: Applied patch from Edward Jason Riedy to use '#' + as separator in sed commands. + +1998-12-15 Martin Baulig + + Released LibGTop 0.99.0 which is a feature-freezed version + for GNOME 1.0. + +1998-12-09 Martin Baulig + + * configure.in: We need to define LIBSUPPORT and SUPPORTINCS under + all circumstances as it is in gnome-libs. + + * include/glibtop/procargs.h (glibtop_get_proc_args): Make the + return value a `char *' instead of a `const char *'. + +1998-12-09 Martin Baulig + + * LIBGTOP-VERSION: Set version number to 0.29.1. + +1998-12-09 Martin Baulig + + * libgtop-sysdeps.m4: Moved here from the macros directory, + formerly known as `macros/gnome-libgtop-sysdeps.m4'. + (--enable-hacker-mode): New command line parameter to configure, + enables building of unstable sysdeps directories. + (LIBGTOP_HACKER_TESTS): New macro to check for unsafe things when + hacker mode was enabled. + +1998-12-06 Martin Baulig + + * configure.in: Make it abort if GNOME cannot be found and + the --without-gnome parameter was not given. + +1998-12-03 Martin Baulig + + * LIBGTOP-VERSION (LIBGTOP_VERSION_CODE): Pipe the expression + through `dc' so we get a real number. + +1998-12-03 Martin Baulig + + LibGTop now requires gettext >= 0.10.35. + + * intl: Removed &intl CVS alias. + +1998-11-27 Martin Baulig + + * LIBGTOP-VERSION: Set version number to 0.29.0. + + * TODO: Add things that need to be done before Dec 15. + + This is basically a feature freeze for the C language part + of LibGTop except for things that are marked with (***) in + the TODO. + +1998-11-20 Martin Baulig + + * sysdeps/common/mountlist.c: Applied a patch from Kenneth Stailey to + make it work on OpenBSD. + +1998-11-18 Martin Baulig + + * lib/open.c (glibtop_open_l): We need to set argv[0] in call + to execl () to avoid a core dump in _init () on FreeBSD 3.0. + +1998-11-11 Martin Baulig + + * include/glibtop/gnuserv.h (MCOOKIE_SCREEN): Don't define this + any longer, we now use the port the daemon is listening on instead + of a fixed screen. + +1998-11-11 Martin Baulig + + * configure.in (--enable-debug): Define LIBGTOP_ENABLE_DEBUG + if this parameter is given. + (--enable-fatal-warnings): New parameter to make all warnings + fatal; define `LIBGTOP_FATAL_WARNINGS' if given. + + * sysdeps/common/error.c (glibtop_error_r): Use abort () instead + of exit () if LIBGTOP_ENABLE_DEBUG. + (glibtop_error_io_r): Likewise. + (glibtop_warn_r): Call abort () if LIBGTOP_FATAL_WARNINGS. + (glibtop_warn_io_r): Likewise. + + [NOTE: To get a core dump of the libgtop_server, you need to + remove all suid/sgid bits and invoke it as a priviledged user.] + +1998-11-08 Raja R Harinath + + * Makefile.am (support): Don't build if not BUILD_GNOME_SUPPORT. + +1998-11-02 Martin Baulig + + * include/glibtop/parameter.h: Added `GLIBTOP_PARAM_REQUIRED'. + + * lib/parameter.c (glibtop_set_parameter_l): It's no longer + allowed to set GLIBTOP_PARAM_FEATURES. + (glibtop_get_parameter_l): You can use `GLIBTOP_PARAM_REQUIRED' + to read server->required and ... + (glibtop_set_parameter_l): ... set it here. + +1998-10-26 Martin Baulig + + Added `Network Load' feature (netload). + + * include/glibtop/netload.h: New file. + * features.def: Added new feature `netload'. + +1998-10-26 Martin Baulig + + Added `Command Line Parameters' feature (proc_args). + + * include/glibtop/proc_args.h: New file. + * features.def: Added new feature `proc_args'. + + * lib/lib.awk: New type `unsigned' for the features.def which + is `unsigned'. + +1998-10-25 Martin Baulig + + Added PPP/ISDN support. + + * include/glibtop/ppp.h: New file. + * features.def: Added new feature `ppp'. + + * acconfig.h (HAVE_I4B): Defined if we have the I4B package. + (HAVE_I4B_ACCT): Defined if we have ISDN statistics with I4B. + + * misc: New directory. + * misc/i4b_acct.txt: Read this file to get ISDN statistics on BSD. + + * lib/lib.awk: New type `ushort' for the features.def which is + `unsigned short'. + +1998-10-20 Martin Baulig + + * include/glibtop/proc_signal.h: Use a 2-element-array of + type `guint64' for all signal masks instead of just + scalar numbers. This avoids problems on systems with more + than 64 signals. + + If there is any operating system out there with even more than + 128 signals, we can simply increase the number of array elements + here. + + [NOTE for people porting libgtop: + + Please use all 64 bits of the `guint64' and not just 32 - the + signal number (as it is used in calls to kill () ...) should be + a bit-index into this field; if a process ignores for instance + signal 64, it has the 0-bit of sigcatch[1] set, if it ignores 63, + this is the 63-bit of sigcatch[0] and so on ... + + The mapping between signal numbers and their names is done via the + glibtop_sys_siglist [] field which should be declared in + sysdeps/@sysdeps_dir@/siglist.c - see linux for an example. + ] + + * features.def: It's now safe to put things like `loadavg[3]' + here - the awk skripts should correctly threat this as an array. + +1998-10-12 Martin Baulig + + * configure.in (GNOME_COMPILE_WARNINGS): Let the user enable + compiler warnings. + (--with-libgtop-guile): Make the default to build the guile + interface if guile can be found. + + * Makefile.am (confexec_DATA): Install `feature.def' as + `libgtop-features.def'. + * libgtop.spec: Added `%{prefix}/lib/*.def' to the file list. + +1998-10-11 Martin Baulig + + * configure.in: Don't create `guile/Makefile'. + * Makefile.am (DIST_SUBDIRS): Removed. + (SUBDIRS): Removed `guile'. + + * include/glibtop/*.h: Removed external delarations of all + `glibtop_guile_*' functions that were formerly defined in + sysdeps/guile/guile.c and sysdeps/guile/names/guile-names.c. + +1998-10-11 Martin Baulig + + * sysdeps/guile/ChangeLog: New file. + + * LIBGTOP-VERSION: Set version number to 0.26.3. + * libgtop.spec: Likewise. + + * Makefile.am (confexec_DATA): Added `features.def'. + * libgtop-config.in: Added `--features-def-file' parameter + to get pathname of installed `features.def' file. + + * perl: Removed everything in this subdirectory. This was + only experimental. The real perl bindings for LibGTop are + in the libgtop-bindings module. + +1998-10-11 Martin Baulig + + * src/inodedb/Makefile.am: Removed @libs_xauth@ and -lgdbm + from the _LDADD variables since libtool automatically gets + the dependencies. + * src/daemon/Makefile.am: Likewise. + * examples/Makefile.am: Likewise. + +1998-10-10 Martin Baulig + + * configure (LIBGTOP_EXTRA_LIBS): Added `GLIB_LIBS'. + + * perl/ChangeLog: New file. + +1998-10-07 Martin Baulig + + * configure.in (ALL_LINGUAS): Added `de'. + +1998-10-03 Martin Baulig + + * include/glibtop/global.h: Only include system header files + if we are `_IN_LIBGTOP'. + (G_GNUC_NORETURN, G_GNUC_CONST, G_GNUC_UNUSED): Added those + definitions if we are `_IN_LIBGTOP'. + +1998-09-29 Sung-Hyun Nam + + * configure.in (ALL_LINGUAS): add `ko' + * po/ko.po: new file. + +1998-09-27 Martin Baulig + + * configure.in: Make it really *require* GLIB >= 1.1.3. + +1998-09-27 Raja R Harinath + + * configure.in: Move check for `-lresolv', `-lsocket' and `-lnsl' + after X11 checks. + +1998-09-27 Martin Baulig + + * configure.in: Do not even check for guile if it is disabled. + +1998-09-12 Martin Baulig + + * include/glibtop/sysinfo.h: New file. This is used in guname to + fetch as many information about the system as possible like detailed + information about hardware etc. + + * configure.in (AM_PATH_GLIB): LibGTop now requires glib. + +1998-09-09 Martin Baulig + + * include/glibtop/proctime.h (glibtop_proc_time): Added `xcpu_utime' + and `xcpu_stime'. + + * sysdeps/linux/ChangeLog: New file. + + * glibtop.h (glibtop): Added `ncpu'. This is zero for single processor + systems and the number of CPUs otherwise. + + * include/glibtop/cpu.h (glibtop_cpu): Added `xcpu_total', `xcpu_user', + `xcpu_nice', `xcpu_sys' and `xcpu_idle'. + (GLIBTOP_NCPU): #define this to 4. + +1998-09-08 Martin Baulig + + * configure.in: Make the default to disable guile. + +1998-08-30 Martin Baulig + + * LIBGTOP-VERSION (LIBGTOP_VERSION_CODE): Added. This is a numerical + constant ("1.234.567" -> 1234567) to be used in C preprocessor + conditionals. + +1998-08-29 Martin Baulig + + * LIBGTOP-VERSION (LIBGTOP_INTERFACE_AGE, LIBGTOP_BINARY_AGE): Added. + * configure.in (LIBGTOP_INTERFACE_AGE, LIBGTOP_BINARY_AGE): AC_SUBST. + (LT_RELEASE, LT_CURRENT, LT_REVISION, LT_AGE): AC_SUBST. + (LT_VERSION_INFO): Sets `-version-info' for libtool. + + * */Makefile.am: We now use the correct `-version-info' parameter + for libtool. + +1998-08-25 Martin Baulig + + * include/glibtop/command.h (glibtop_call): Third argument is + now `const void *'. + + * include/glibtop/xmalloc.h (g_free): Now taking a + `const void *'. + +1998-08-25 Martin Baulig + + * src/daemon/ChangeLog: New file. + + * sysdeps/sun4/ChangeLog: New file. + + * sysdeps/stub/ChangeLog: New file. + + * configure.in: Added check for `-lsocket'. + (LIBGTOP_INCS): Added $(SUPPORTINCS). + (INCLUDES): Added $(SUPPORTINCS). + + * acconfig.h: Added `NEED_DECLARATION_GETHOSTNAME', + `NEED_DECLARATION_SETREUID', `NEED_DECLARATION_SETREGID' + and `NEED_DECLARATION_GETPAGESIZE'. + + * includue/glibtop/global.h (): Include this. + + * lib/init.c (_init_server): Declared `static'. + + * lib/read_data.c: Added cast to `const void *' in calls to + `recv' and `read' to avoid compiler warnings. + + * configure.in (INCLUDES): No longer using installed header files. + +1998-08-23 Martin Baulig + + * features.def (mountlist): Using `int(fs_usage)'. + +1998-08-21 Martin Baulig + + * ANNOUNCE-0.25: Released LibGTop 0.25 stable. + +1998-08-18 Martin Baulig + + * LIBGTOP-VERSION: Set version number to 0.25.0. There is now really + a feature freeze until it's released, bug fixes only ... + + * include/glibtop/procmap (glibtop_map_entry): Added `flags' and + `filename' fields. + + * LIBGTOP-VERSION: Added `LIBGTOP_MICRO_VERSION'. + * libgtopConf.sh.in: Likewise. + + * libgtopConf.sh.in: Added `LIBGTOP_EXTRA_LIBS'. + + * sysdeps/linux/procmap.c: Added implementation. + +1998-08-17 Martin Baulig + + * include/glibtop/procmap (glibtop_map_entry): Added `offset' and + `perm' fields. + + * src/inodedb: New directory. + * src/inodedb/README: New file - read it to know what this is about. + + * configure.in (--with-libgtop-inodedb): New `configure' parameter. + * include/glibtop/inodedb.h: New file. + * sysdeps/common/inodedb.c: New file. + +1998-08-17 Martin Baulig + + * LIBGTOP-VERSION: Released libgtop-0.25pre1. With this + release I made what Linus calles a ``feature freeze'' until + 0.25 is out. A Tarball and RPMS can be found at my site: + `ftp://ftp.home-of-linux.org/pub/'. + +1998-08-17 Martin Baulig + + * libgtop-conf.in: New file. + +1998-08-16 Martin Baulig + + * include/glibtop/loadavg.h (glibtop_loadavg): Added new + fields `nr_running', `nr_tasks', `last_pid'. + * features.def (loadavg): Added new fields `nr_running', + `nr_tasks', `last_pid'. + +1998-08-12 Martin Baulig + + * include/glibtop/procsegment.h (glibtop_proc_segment): Using + `text_rss', `shlib_rss', `data_rss' and `dirty_size' instead of + `tsr', `lrs', `drs' and `dt'. New field `stack_rss'. + + * sysdeps/linux/procmem.c: Memory sizes now correctly in bytes. + * sysdeps/linux/procsegment.c: Dito. + + * sysdeps/kernel/procsegment.c: Stack pages are reported via + `stack_rss' and no longer count towards `data_rss' + * kernel/table.h (table_proc_segment): Added `srs' field. + * kernel/table21/module.c (TBL_PROC_SEGMENT): Added kernel support + for this. + + * sysdeps/{linux, kernel, stub}/procmap.c: New files. + +1998-08-11 Martin Baulig + + * guile/features.awk: New file. + * guile/make-docbook.scm: Improved automatical generation of + the documentation file `reference.sgml'. + * guile/reference.sgml: This file is automatically generated, + but many people have problems with it, so we add it to CVS. + +1998-08-10 Martin Baulig + + * include/glibtop/procmap.h (glibtop_proc_map): New file. + * features.def: Added definition of `proc_map'. + + * include/glibtop/proctime.h (glibtop_proc_time): Added new + fields `rtime' and `frequency'. + +1998-08-09 Martin Baulig + + * include/glibtop/prockernel.h (glibtop_proc_kernel): Renamed + `wchan' field to `nwchan'; added `wchan' which is of type `char [40]'. + + * features.def: Changed format of this file to support multiple + arguments to be passed to a function. + + * include/glibtop/proclist.h: `glibtop_get_proclist' now takes two + more arguments `method' and `param'. + +1998-08-07 Martin Baulig + + * sysdeps/freebsd/ChangeLog: New file. + + * src/server: Removed. + * src/daemon/{server, version}.c: New files. + * src/daemon/Makefile.am: Added `libgtop_server'; this has been + moved here from `src/server' since it shares some source code files + with the `libgtop_daemon'. + + * LIBGTOP-VERSION: Added `LIBGTOP_SERVER_VERSION'. + * src/daemon/gnuserv.c, lib/open.c: Improved version check between + client and server. + + * include/glibtop/output.h: Removed. + + * sysdeps/stub_suid: New directory. This is mainly used as example + for people porting libgtop to other systems. + + * sysdeps/common/sysdeps_suid.c: New file. + Defines `glibtop_init_hook_p'. + + * sysdeps/osf1/*.c (glibtop_init__s): New functions. + (glibtop_init__p): New functions. + +1998-08-07 Martin Baulig + + * glibtop.h (_glibtop): New fields `error_method', `sysdeps' and + `required'. I added an improved error handling: the client can tell + the libraries which fields are absolutely required for each features + and if it fails to set one of them, this will create an error which + is handled depending upon the `error_method'. + + * include/glibtop/open.h: Define some constants for `error_method'. + + * lib/sysdeps.c (glibtop_get_sysdeps_r): No longer actually call any + sysdeps function, it now simply copies `server->sysdeps'. + (_glibtop_init_hook_s): Added. List of functions to be called during + `glibtop_init_s' set to `glibtop_init__s'. + + * include/glibtop/sysdeps.h (): Removed. + (glibtop_init_func_t): New typedef. + (_glibtop_init_hook_s): Added. + + * sysdeps/linux/*.c (glibtop_init__s): New functions. + (glibtop_get_proc_*): Zero is now a valid pid. + + * sysdeps/kernel/*.c (glibtop_init__s): New functions. + (glibtop_get_proc_*): Zero is now a valid pid. + +1998-08-06 Martin Baulig + + * configure.in (HAVE_SOCKETS, HAVE_SOCKADDR_SUN_LEN): New checks. + + * include/glibtop/*.h: Using `GLIBTOP_GUILE' instead of `HAVE_GUILE' + so one should be able to use libgtop without guile in an application + even if guile is installed. + + * sysdeps/common/mountlist.c: Fixed some `xstrdup' problems. + + * lib/open.c: Now correctly reading server features for + `GLIBTOP_METHOD_PIPE'. + + * sysdeps/freebsd: New directory. + +1998-08-01 Martin Baulig + + * include/glibtop/swap.h (glibtop_swap): Added `pagein' and `pageout'. + + * kernel/table20/table.h: Removed. + * kernel/table21/table.h: Removed. + * kernel/table.h: Added. Things are now binary compatible between + both kernel versions. + +1998-07-30 Martin Baulig + + * acconfig.h (guint64, int64_t): Added. + + * lib/lib.awk: Using correct `(1 << GLIBTOP_SYSDEPS_)' + in call to `glibtop_init_r'. + + * configure.in (GNOME_LIBGTOP_TYPES): New check. + + * include/glibtop/*.h: Using `guint64' instead of `unsigned long' + and `long' to avoid problems when client is on a 32bit system and + the server on a 64bit system. + + * sysdeps/common/gnuslib.c: Using `0xffffffff' instead of -1 + as error code for inet_addr () since on 64bit systems, + `inet_addr (some_error) != (INET_ADDR) -1'. + + * configure.in: Only defining guile stuff if + we really have guile. + +1998-07-29 Martin Baulig + + * guile/ChangeLog: New file. + + * features.def: New format - now includes type of return value + and parameters. + + * lib/lib.awk: Changed to use new `features.def'. + * sysdeps/guile/guile.awk: Dito; + * sysdeps/guile/names/guile-names.awk: Dito. + + * libgtopConf.sh.in: Added + `LIBGTOP_NAMES_LIBS', `LIBGTOP_NAMES_INCS', + `LIBGTOP_GUILE_NAMES_LIBS', `LIBGTOP_GUILE_NAMES_INCS', + `LIBGTOP_MAJOR_VERSION', `LIBGTOP_MINOR_VERSION' + `LIBGTOP_VERSION', `libgtop_sysdeps_dir'. + + * acinclude.m4 (AC_LC_SYSDEPS): Removed since this has been + replaced with `GNOME_LIBGTOP_SYSDEPS' long ago. + + * LIBGTOP-VERSION: New file. + + * */Makefile.am (INCLUDES): Removed; now defined in `configure.in'. + + * sysdeps/names/mountlist.c: New file. + + * lib/{init, open}.c (GTOP_SERVER): Renamed to `LIBGTOP_SERVER'. + + * configure.in (INCLUDES): Added definition. + (libgtop_want_names): Always true; `libgtop_names.la' is now + always created since some other programs rely upon it - but + have to use `LIBGTOP_NAMES_LIBS' and `LIBGTOP_NAMES_INCS' to + use it in your application. + (libgtop_want_guile_names): Always true; but you have to use + `LIBGTOP_GUILE_NAMES_LIBS' and `LIBGTOP_GUILE_NAMES_INCS' to + use it in your application. + (LIBGTOP_LIBS): Removed `-lgtop_names' and `-lgtop_guile_names'. + (LIBGTOP_NAMES_LIBS): New variable. Use it to link your + application with the names interface. + (LIBGTOP_NAMES_INCS): New variable. Also #defines `GLIBTOP_NAMES' + which is now required if your application wants to use the names + interface. + (LIBGTOP_GUILE_NAMES_LIBS): New variable. Use it to link your + application with the guile names interface. + (LIBGTOP_GUILE_NAMES_INCS): New variable. Also #defines + `GLIBTOP_NAMES' and `GLIBTOP_GUILE_NAMES' which are now required + if your application wants to use the guile names interface. + +1998-07-24 Martin Baulig + + * sysdeps/common/mountlist.c (glibtop_get_mountlist_s): + Added `all_fs' parameter. + + * sysdeps/{kernel, linux}/*.c: Replaced `glibtop_init_r' with + `glibtop_init_s'. + + * sysdeps/sun4/open.c (glibtop_init_p): Removed `program_name' + parameter. + + * sysdeps/osf1/glibtop_suid.h: New file. + + * sysdeps/osf1/glibtop_server.h: Now correctly using + `(1 << GLIBTOP_SYSDEPS_*)' instead of `GLIBTOP_SYSDEPS_*'. + + * sysdeps/osf1/open_suid.c (glibtop_init_p): New function. + + * sysdeps/osf1/proc*.c: Done some more work here. + +1998-07-23 Martin Baulig + + * include/glibtop/procsignal.h (glibtop_proc_signal): + Changed type for `signal', `blocked', `sigignore' and + `sigcatch' to `unsigned long long'. + +1998-07-22 Martin Baulig + + * include/glibtop/fsusage.h: New file. + + * features.def: Added new feature `fsusage'. + + * sysdeps/common/fsusage.c (glibtop_get_fsusage_s): New function. + (get_fs_usage): Declared as `static'. + + * sysdeps/names/fsusage.c: New file. + + * include/glibtop/mountlist.h: New file. + + * features.def: Added new feature `mountlist'. + + * sysdeps/common/mountlist.c (glibtop_get_mountlist_s): New function. + (read_filesystem_list): Declared as `static'. + + * sysdeps/common/Makefile.am (libgtop_common_la_SOURCES): + Added `fsusage.[ch]' and `mountlist.[ch]'. + + * include/glibtop/signal.h: New file. + + * sysdeps/{kernel, linux, osf1, sun4, stub}/siglist.c: New files. + +1998-07-22 Martin Baulig + + * lib/init.c (glibtop_init_s): Added this init function of + the sysdeps directory `libgtop_sysdeps.la'. + + * lib/open.c (glibtop_open_l): Unconditionally calling + `glibtop_init_s' after server initialization. + + * lib/lib.awk: Removed references to functions from + `libgtop_sysdeps_suid.la' to avoid undefined symbols. + + * sysdeps/stub/open.c (glibtop_open_s): Renamed this + function from `glibtop_open_r'. + + * sysdeps/stub/close.c (glibtop_close_s): Renamed this + function from `glibtop_close_l'. + + * sysdeps/kernel/open.c (glibtop_open_s): Renamed this + function from `glibtop_open_r'. + + * sysdeps/kernel/close.c (glibtop_close_s): Renamed this + function from `glibtop_close_l'. + + * sysdeps/linux/open.c (glibtop_open_s): Renamed this + function from `glibtop_open_r'. + + * sysdeps/linux/close.c (glibtop_close_s): Renamed this + function from `glibtop_close_l'. + + * sysdeps/osf1/Makefile.am (lib_LTLIBRARIES): Added + `libgtop_sysdeps_suid.la' for the suid server. + + * sysdeps/osf1/open_suid.c (glibtop_open_p): New file. + Contains all stuff that was formerly in `open.c'. + + * sysdeps/osf1/open.c: Moved everything from here into + the new file `open_suid.c'. + + * sysdeps/osf1/open.c (glibtop_open_s): New function. + + * sysdeps/osf1/close_suid.c (glibtop_close_p): New file. + + * sysdeps/osf1/close.c (glibtop_close_s): New function. + + * sysdeps/osf1/*.c: Using the new init, open and close + functions. + + * sysdeps/sun4/Makefile.am (lib_LTLIBRARIES): Added + `libgtop_sysdeps_suid.la' for the suid server. + + * sysdeps/sun4/nosuid.c (glibtop_open_s, glibtop_close_s): New file + + * sysdeps/sun4/*.c: All functions now have the `_p' suffix. + + * sysdeps/common/Makefile.am (lib_LTLIBRARIES): Added + `libgtop_suid_common.la' which only contains stuff that is + needed in the suid parts. + + * sysdeps/common/xmalloc.c: Using `glibtop_error_io_r' instead + of `glibtop_error_r'. + + * sysdeps/{kernel, linux, osf1, sun4, stub}/init.c: Removed. + `glibtop_init_s' has been moved into `lib/init.c' since it's the + same in all the sysdeps directories. + + * src/server/main.c: It is now an error to request a feature that + does not need the suid server. + + * src/proxy: Removed. + +1998-07-21 Martin Baulig + + * doc/ChangeLog: New file. + + * sysdeps/kernel/*.c: Using `glibtop_error_io_r' instead + of `glibtop_error_r'. + + * sysdeps/kernel/proclist.c: Now using the table () function, too. + This means that currently the table () function can fetch all + information for libgtop and you can even unmount /proc ! + +1998-07-18 Martin Baulig + + * lib/{init, open}.c: Added `GLIBTOP_METHOD_PIPE' again. + + * src/server/main.c: Removed gettext stuff. + +1998-07-17 Martin Baulig + + * sysdeps/common/sysdeps.c (glibtop_get_sysdeps_r): Using + library functions with '_l' prefix instead of directly calling + sysdeps code with '_r' prefix. This is necessary for client/server + mode. + + * lib/lib.awk (glibtop_get_*): Now correctly using + `(1 << GLIBTOP_SYSDEPS_*)' instead of `GLIBTOP_SYSDEPS_*'. + + * sysdeps/sun4/proclist.c (glibtop_get_proclist_p): Added + implementation of that feature. + + * sysdeps/sun4/proc_{uid, state}.c: Now working quite well. + + * sysdeps/sun4/proc_{mem, time, signal, kernel, segment}.c: Added + some basic implementation; this isn't really working yet. + + * sysdeps/linux/sem_limits.c: Applied patch from Albert K T Hui + for glibc 2.1. + +1998-07-15 Martin Baulig + + * sysdeps/sun4/loadavg.h: New file. Imported from top 3.4. + + * sysdeps/sun4/uptime.c (glibtop_get_uptime_p): Added + implementation of that function using glibtop_get_cpu (). + + * sysdeps/sun4/loadavg.c (glibtop_get_loadavg_p): Added + implementation of that feature. + + * sysdeps/sun4/{shm_limits.c, msg_limits.c, shm_limits.c}: + Added implementation of this features. + +1998-07-14 Martin Baulig + + * src/daemon/server_config.h.in: Added some comments. + + * src/daemon/server_config.pl: New file. This is a script you can use + to create `server_config.h'. It will query you for some configuration + options. + + * configure.in (AC_PROG_AWK): Replaced this test with explicit test + for `gawk' and `awk' since `mawk' doesn't work. + +1998-07-14 Martin Baulig + + * src/daemon/gnuserv.c: Doing correct server initialization + using `glibtop_set_parameter_l' and `glibtop_init_r'. + + * src/daemon/main.c: Removed call to `glibtop_init_r'. + + * lib/open.c (glibtop_open_l): We now call the open function + of the sysdeps directory (glibtop_open_r) for server method + `GLIBTOP_METHOD_DIRECT'. + + * sysdeps/{linux, sun4, stub}/open.c: No longer `memset' + server to zero. + + * src/daemon/slave.c: New file. + + * src/daemon/*.c: Done some more work on the daemon. + + * sysdeps/common/gnuslib.c: Removed IPC stuff. + + * include/glibtop/gnuserv.h: Removed IPC stuff. + + * include/glibtop/command.h (glibtop_response_unit): Added + typedef for `struct _glibtop_response_unit'. + + * lib/Makefile.am: Using `$(top_srcdir)/features.def' + instead of `$(top_builddir)/features.def'. + + * sysdeps/guile/Makefile.am: Using `$(top_srcdir)/features.def' + instead of `$(top_builddir)/features.def'. + + * sysdeps/guile/names/Makefile.am: Dito. + + * sysdeps/stub/*.c: changed suffix of all functions + from '_s' to '_r'; see also ChangeLog entry from Jun 6. + +1998-07-13 Martin Baulig + + * src/daemon/server_config.h: Removed from CVS. + This is a config file which needs to be edited. + + * src/daemon/server_config.h.in: Added. This is just + an example for `server_config.h'. + +1998-07-13 Martin Baulig + + * glibtop.h: Fixed invocation of `glibtop_close_r'. + + * sysdeps/linux/procstate.c: Added missing `fclose'. + + * include/glibtop/gnuserv.h (UNIX_DOMAIN_SOCKETS): Defining. + + * include/glibtop/open.h (GLIBTOP_METHOD_UNIX): Added. + + * lib/init.c: Added new method `GLIBTOP_METHOD_UNIX'. + + * lib/open.c: Added support for Unix Domain Sockets. + + * lib/close.c: Now closing inet and unix connections. + + * lib/parameter.c (glibtop_set_parameter_l): You can now + set the `method' and `features' fields. + + * src/daemon/server_config.h: New file. + + * src/daemon/{gnuserv.c, main.c}: More work on the server. + +1998-07-10 Martin Baulig + + * src/Makefile.am (SUBDIRS): Removed `proxy'. This directory + is considered obsolete and will be removed soon. + +1998-07-06 Martin Baulig + + * sysdeps/common/mountlist.c: using functions from `xmalloc.c'. + + * sysdeps/common/error.c: all functions now accept NULL as + `server' argument. + + * acconfig.h (AFS, MOUNTED_FREAD, MOUNTED_FREAD_FSTYP, + MOUNTED_GETFSSTAT, MOUNTED_GETMNT, MOUNTED_GETMNTENT1, + MOUNTED_GETMNTENT2, MOUNTED_GETMNTINFO, MOUNTED_LISTMNTENT, + MOUNTED_VMOUNT, STAT_STATFS3_OSF1, STAT_READ_FILSYS, + STAT_STATFS2_BSIZE, STAT_STATFS2_FSIZE, STAT_STATFS2_FS_DATA, + STAT_STATFS4, STAT_STATVFS, STATFS_TRUNCATES_BLOCK_COUNTS): + New macros. + + * configure.in: added GNOME_FILEUTILS_CHECKS. + + * sysdeps/common/{fsusage, mountlist}.[ch]: + Imported from GNU Fileutils 3.16. + + * sysdeps/common/mountlist.c: using g_malloc, g_realloc and g_strdup. + +1998-07-03 Martin baulig + + * macros/gnome-libgtop-sysdeps.m4: No longer use + `glibtop_machine.h' for Linux. + + * sysdeps/linux/glibtop_machine.h: Removed. + + * sysdeps/guile/guile.awk: Using `scm_append' + instead of `gh_append'. + + * sysdeps/guile/names/guile-names.awk: dito. + + * sysdeps/linux/*.c: Using code from stable branch again. + + * include/glibtop/parameter.h: New file. + + * lib/parameter.c: New file. + + * lib/{open, init}.c: Done some more work on server + initialization + +1998-06-21 Martin Baulig + + * perl/*: Added perl interface. + + * sysdeps/linux/cpu.c: Bug fix. + + * include/glibtop/global.h: Only including guile header files + within libgtop. + + * configure.in (LIGBTOP_LIBS): Added `-lgtop'. + + * Makefile.am: Creating `perl/Makefile.PL' from `perl/Makefile.PL.in' + and `perl/Libgtop.xs' using `perl/perl.awk'. + +1998-06-18 Martin Baulig + + * sysdeps/linux/*.c: Reverted some stuff from 06-07-1998 + since it was too buggy. + + * glibtop.h (_glibtop): New field `server_port'. + + * lib/xmalloc.c (g_strdup): New function. + + * lib/gnuclient.c: Removed. + + * lib/{command, write, read}.c: Changed client <-> server + interface to make less system calls. + + * src/daemon/main.c: Changed server side of interface. + + * include/glibtop/command.h (struct _glibtop_response): New + structure to return data from the server to the client. + +1998-06-14 Martin Baulig + + * glibtop.h (struct _glibtop): Added `socket' field. + + * include/glibtop/gnuserv.h: New file. Imported from xemacs 20.3. + + * sysdeps/common/gnuslib.c: New file. Imported from xemacs 20.3 + + * lib/gnuclient.c: New file. Imported from xemacs 20.3 + + * sysdeps/daemon/gnuserv.c: New file. Imported from xemacs 20.3 + + * sysdeps/daemon: New directory. + + * configure.in (LIBGTOP_LIBS, LIBGTOP_GUILE_LIBS): Added + `$X_LIBS -lXau' when we have xauth. + + * acconfig.h (HAVE_XAUTH): New tag. + + * configure.in: Added check for `HAVE_XAUTH'. + + * sysdeps/common/error.c (glibtop_warn_r): New function - + same as `glibtop_error_r', but doesn't call `exit'. + (glibtop_error_io_r, glibtop_warn_io_r): New functions, + display `strerror (errno)' together with message. + + * include/glibtop/global.h (TIME_WITH_SYS_TIME): including + correct headers; (HAVE_UNISTD_H): Added conditional. + Added `#include ' and `#include '. + + * acconfig.h (HAVE_LINUX_TABLE): New tag. + + * lib/lib.awk: New file. + Creates `lib.c' depending upon `features.def'. + + * lib/.c: Removed. + + * sysdeps/guile/guile.awk: New file. + Creates `guile.c' depending upon `features.def'. + + * sysdeps/guile/*.c: Removed. + +1998-06-13 Martin Baulig + + * features.def: List of features for `guile-names.awk'. + + * sysdeps/guile/names/guile-names.awk: New file. + Creates `guile-names.c' depending upon `features.def'. + + * sysdeps/guile/names/*.c: Removed. + + * kernel: New directory. Contains some kernel code to + implement a new system call table () to fetch information + directly from the Linux kernel. + + * sysdeps/kernel: New directory. Uses the table () function + from the `kernel' directory to fetch things directly from + the Linux kernel. + + * sysdeps/Makefile.am (DIST_SUBDIRS): Added `kernel'. + + * configure.in: Removed `build_CC' again. + +1998-06-12 Martin Baulig + + * include/glibtop/sysdeps.h (glibtop_types_sysdeps): + Forgot to change declaration on Jun 6. + + * sysdeps/names/sysdeps.c (glibtop_types_sysdeps): + Using numeric constants from `types.h' instead of string + constants; forgot to change this on Jun 6. Added information + about new `features' field of `_glibtop_sysdeps'. + + * sysdeps/guile/names/*.c (glibtop_guile_types_*): + Using `gh_ulong2scm' instead of `gh_str02scm'. + + * sysdeps/guile/proclist.c: Replaced call to + `gh_append2 ()' with `gh_append ()'. + + * sysdeps/guile/names/*.c: dito. + +1998-06-08 Martin Baulig + + * support: Added again. + + * Makefile.am (SUBDIRS): Added `support' again. + + * configure.in: First, we check for gnome. If it is not + found, we run GNOME_SUPPORT_CHECKS; otherwise use + `$GNOME_LIBDIR -lgnomesupport'. + +1998-06-07 Martin Baulig + + * examples/ChangeLog: New file. + + * macros/gnome-libgtop-sysdeps.m4: Include + `glibtop_machine.h' for Linux. + + * sysdeps/linux/glibtop_machine.h: New file. + + * sysdeps/linux/*.c: Performance optimizations. We now use + `open' and `read' instead of `fopen' and `fscanf'. + + * *.[ch]: Using single underscore instead of two underscores + for function prefixes (regexp: ``s,__([rspl])\b,_$1,g'') to + avoid ambiguity with mangled C++ names. + +1998-06-06 Martin Baulig + + * sysdeps/osf1/glibtop_server.h: New file. + + * sysdeps/osf1/*.c: renamed all functions implementing + features that don't need to be suid to '__s'. + + * sysdeps/names/procdata.c: Removed that file. + + * include/glibtop/*.h (glibtop_types_*): Changed declaration. + + * glibtop.h: Added `#include '. + + * include/glibtop/types.h: New file - numeric constants + for `glibtop_types_'. + + * sysdeps/names/*.c (glibtop_types_*): Using numeric + constants from `types.h' instead of string constants. + +1998-06-05 Martin Baulig + + * support: removed that directory. + + * configure.in: we check whether '-lgnomesupport' is + included in $GNOME_LIBS and add it together with + $GNOME_LIBDIR to LIBSUPPORT in this case. + + Gnome (gnome-libs) is now required to build libgtop, + added short comment to configure.in how to revert this + change. + + * Makefile.am: removed `support' subdir. + +1998-06-03 Martin Baulig + + * libgtop.spec: New file. + + * Makefile.am (EXTRA_DIST): Added `autogen.sh' and + `libgtop.spec'. + + * configure.in (LIBGTOP_INCS): is now identically to + `LIBGTOP_GUILE_INCS'. + + * include/glibtop/global.h: only including intl headers + while compiling libgtop. + +1998-06-02 Federico Mena Quintero + + * src/server/main.c: #include + +1998-06-02 Martin Baulig + + * lib/open.c (glibtop_open): renamed to `glibtop_open__l'. + + * sysdeps/linux/open.c (glibtop_open): renamed to + `glibtop_open__r'. + + * include/glibtop/open.h (GLIBTOP_OPEN_NO_OVERRIDE): + tells `glibtop_open' to use the default server and not + to check the environment variables. + + * include/glibtop/sysdeps.h (_glibtop_sysdeps): + renamed 'dummy' member to 'features'. + + * src/proxy/*: new directory - proxy server. + + * include/glibtop/command.h (GLIBTOP_CMND_SYSDEPS): + added definition here. + + * src/server/main.c (GLIBTOP_CMND_SYSDEPS): new + command to get glibtop_server_features. + +1998-06-01 Martin Baulig + + * NEWS: added more detailed description of today's and + yesterday's changes. + + * include/glibtop/*.h: to use the ChangeLog entry from May 28: + '__l' is a function defined in the client part; + '__s' is a function defined in the sysdeps part and + '__p' is a function that needs special priviledges. + '__r' is mapped either on '__p' or on '__s'. + the function without suffix is mapped on '__l'. + + * sysdeps/common/sysdeps.c: now using '__r' functions, + they are #defined either as the '__p' or the '__s' ones. + + * sysdeps/linux/*.c: changed call of 'glibtop_init__r', + it now takes two additional arguments. + + * examples/{first.c, second.c}: now using 'glibtop_init' + instead of 'glibtop_init__r'. + + * include/glibtop/sysdeps.h: added 'dummy' member so + 'GLIBTOP_SYSDEPS_' now start with 1. + + * include/glibtop/*.h: we now #define 'glibtop_get_' + as 'glibtop_get___l' and 'glibtop_get___r' + either as the '__p' or the '__s' function. + + * lib/*.c: removed #if's - we now decide at runtime + whether to use the server or to call the appropriate + function for the sysdeps directory. + +1998-05-28 Martin Baulig + + * src/server/main.c: we now use the '__p' functions, + but only if the appropriate 'GLIBTOP_SUID_' + has a non-zero value. + + * configure.in (@machine_incs@): always use + `-I$(top_srcdir)/sysdeps/@sysdeps_dir@'; it's no + longer conditional. + + * examples/Makefile.am: removed the '_linux' examples. + + * sysdeps/linux/*.c: renamed all functions implementing + features to '__s'. + + * lib/*.c: renamed all functions implementing features + to '__l'; we only emit code for those functions if the + corresponding 'GLIBTOP_SUID_' has a positive value. + + * include/glibtop/*.h: added some new function suffixes: + '__l' is a function defined in the client part; + '__s' is a function defined in the sysdeps part and + '__p' is a function that needs special priviledges. + '__r' is mapped either on '__l' or on '__s'. + + * sysdeps/linux/glibtop_server.h: New file - + defines system dependent constants 'GLIBTOP_SUID_' + being either 'GLIBTOP_SYSDEPS_'+1 depending upon + whether or not this feature requires using the server. + + * lib/sysdeps.c: removed that file; it is no longer + needed. + +1998-05-25 Martin Baulig + + * src/server/main.c: Fixed `broken pipe' error when server + is running SUID; accidentally uses setreuid () instead of + setregid (). + +1998-05-24 Martin Baulig + + * sysdeps/sun4/{open.c, mem.c, glibtop_machine.h}: added + memory statistics. + + * include/glibtop/mem.h (_glibtop_mem): added `locked' + member to this structure for SunOS. + +1998-05-23 Martin Baulig + + * sysdeps/sun4/{open.c, cpu.c}: Started porting. + Getting CPU usage now working. Took a lot of code + from top-3.4. + + * sysdeps/sun4/glibtop_machine.h: New file. + System dependend header file for SunOS. + + * configure.in (CFLAGS): added -D_IN_LIBGTOP + + * */Makefile.am (INCLUDES): removed -I$(includedir). + +1998-05-22 Martin Baulig + + * doc/{libgtop-ref.sgml, libgtop-ref.dsl}: New files. + This is a reference manual that gets automatically + build from make-docbook.scm. + + * guile/make-docbook.scm: New file. Uses the guile + interface of libgtop to create docbook documentation + for all functions. + +1998-05-21 Martin Baulig + + * Makefile.am: 'gtopConf.sh' has been renamed to + 'libgtopConf.sh'; variables in this script have changed. + + * lib/Makefile.am: uses '@LIBGTOP_SERVER@' instead of + '@GTOP_SERVER@'. + + * configure.in: renamed variables for 'libgtopConf.sh.in'. + + * acconfig.h: added 'NEED_LIBGTOP'. + + * libgtopConf.sh.in: renamed from 'gtopConf.sh.in'; + we now define 'LIBGTOP_LIBDIR', 'LIBGTOP_INCLUDEDIR', + 'LIBGTOP_LIBS', 'LIBGTOP_INCS', 'LIBGTOP_GUILE_LIBS', + 'LIBGTOP_GUILE_INCS', 'LIBGTOP_BINDIR', 'LIBGTOP_SERVER', + 'libgtop_sysdeps_dir', 'libgtop_need_server', + 'libgtop_use_machine_h', 'libgtop_guile_found', + 'libgtop_want_names', 'libgtop_want_guile_names', + 'libgtop_want_examples'. + + * gtopConf.sh.in: renamed to 'libgtopConf.sh.in'. + + * acinclude.m4 (AC_LC_SYSDEPS): rewrote that macro - + moved some of the code to 'macros/gnome-libgtop-sysdeps.m4'; + renamed variables: look at the ChangeLog entry for the + new 'libgtopConf.sh.in' for details. + + * doc/gnome-hackers.sgml: added information about latest + changes in 'acinclude.m4' and 'gtopConf.sh.in'. + + * Makefile.am: conditionally building 'examples' subdir, + added 'copyright.txt' to EXTRA_DIST. + + * configure.in: added 'gtop_guile_found', 'gtop_want_names', + 'gtop_want_guile_names' and 'gtop_want_examples' for use in + 'gtopConf.sh.in'; added 'include' and 'include/glibtop' subdirs. + + * acconfig.h: added 'GLIBTOP_EXAMPLES'. + + * acinclude.m4 (AC_LC_SYSDEPS): define 'GLIBTOP_NAMES' when + building libgtop and a new conditional 'GLIBTOP_NAMES'; added + new parameter '--without-examples'; define 'GLIBTOP_EXAMPLES' + and conditional 'GLIBTOP_EXAMPLES'. + + * gtopConf.sh.in: added 'GTOP_GUILE_FOUND', 'GTOP_WANT_NAMES', + 'GTOP_WANT_GUILE_NAMES' and 'GTOP_WANT_EXAMPLES'. + + * include/glibtop/Makefile.am: new file - header file + now get properly installed and go into the distribution. + + * include/Makefile.am: new file + + * sysdeps/guile/Makefile.am: added 'DIST_SUBDIRS' + + * sysdeps/Makefile.am: added 'DIST_SUBDIRS' + + * doc/gnome-hackers.sgml: new file - short intro on how + to use libgtop in the gnome project; especially 'configure' + and 'gtopConf.sh'. + + * doc/gnome-hackers.dsl: new file - sets output filename + and directory for 'gnome-hackers.sgml'. + + * doc/libgtop.dsl: most stuff from this file has moved + to 'dbtohtml.dsl', it now only overrides the output + filename and directory. + + * doc/dbtohtml.dsl: new file - contains most that was + formerly in 'libgtop.dsl'. + + * configure.in: 'GTOP_INCS' and 'GTOP_LIBS' now really + point to the places where everything gets installed and + no longer to the build directory, so that they can be + used in 'gtopConf.sh'. + + * acinclude.m4 (AC_LC_SYSDEPS): added 'machine_incs' + which is used in 'INCLUDES' in several 'Makefile.am's; + fixed typo 'ac_cv_want_names'; added missing AC_SUBST + of 'use_glibtop_machine_h'. + +1998-05-20 Martin Baulig + + * NEWS: added more detailed description of + today's changes. + + * examples/third.c: added required check for + 'GLIBGTOP_GUILE_NAMES'. + + * sysdeps/Makefile.am: only build 'names' subdir + when necessary. + + * sysdeps/guile/Makefile.am: only build 'names' + subdir when necessary. + + * acinclude.m4 (AC_LC_SYSDEPS): added + '--enable-libgtop-server' (default=auto), + '--enable-libgtop-names' (default=yes) and + '--enable-libgtop-guile' (default=yes); we + now define 'GLIBTOP_NAMES' here. + + * acconfig.h: added 'GLIBTOP_NAMES' and + 'GLIBTOP_GUILE_NAMES' + + * gtopConf.sh.in: added definition of 'GTOP_GUILE_LIBS' + and 'GTOP_GUILE_INCS': + + 'GTOP_LIBS' and 'GTOP_INCS' now contains everything + that is needed to link with libgtop. + + 'GTOP_GUILE_LIBS' and 'GTOP_GUILE_INCS' now contains + everything that is needed to link with libgtop and its + guile interface. When guile cannot be found on the system + or building of the guile interface was disables, they are + identical to 'GTOP_LIBS' and 'GTOP_INCS' + [FIXME: Should I make them empty in this case?] + + * sysdeps/osf1/procuid.c (glibtop_get_proc_uid__r): + added implementation for DEC OSF/1. + + * sysdeps/sun4/uptime.c: forgot to checkin + + * sysdeps/sun4/loadavg.c: forgot to checkin + + * sysdeps/osf1/uptime.c: forgot to checkin + + * sysdeps/osf1/loadavg.c: forgot to checkin + +1998-05-19 Martin Baulig + + * sysdeps/stub/uptime.c: forgot this file all the + time - stub for glibtop_uptime + + * sysdeps/stub/loadavg.c: forgot this file all the + time - stub for glibtop_loadavg + + * NEWS: Libgtop is now in the GNOME CVS Repository. + + * po/Makefile.in.in: new file + + * ABOUT-NLS: new file + +1998-05-17 Martin Baulig + + * NEWS: added some stuff from 'README.LATEST'. + + * README.LATEST: incorporated content of this file + into 'NEWS'. + + * include/glibtop: added references to + 'glibtop_types_* []' and 'glibtop_guile_types_*'. + + * sysdeps/guile/names: added implementations of + 'glibtop_types_*' and 'glibtop_description_*'. + + * sysdeps/names: added 'glibtop_types_* []', + changed 'glibtop_descriptions_* []'. + +1998-05-11 Martin Baulig + + * sysdeps/linux: finished the remaining proc_* + functions. + + * sysdeps/guile: all guile functions now return + the 'flags' member as first element of the list. + + * include/glibtop/procstate.h (glibtop_proc_state): + added 'uid' and 'gid' members; the library tries hard + to set those values; it will never set the corresponding + 'flags' value unless the values are correct. + + * examples/first.c: added some nice features. + + * examples/second.c: new file - dumps out all + currently running processes. + +1998-05-11 Martin Baulig + + * sysdeps/linux/cpu.c: added 'frequency' member + to 'struct _glibtop_cpu'. + + * include/glibtop/cpu.h (glibtop_cpu): + added 'frequency' member + + * sysdeps/guile/names/procdata.c: splitted into + procstate.c, procuid.c, procmem.c, proctime.c, + procsignal.c, prockernel.c and procsegment.c + + * sysdeps/guile/procdata.c: splitted into + procstate.c, procuid.c, procmem.c, proctime.c, + procsignal.c, prockernel.c and procsegment.c + + * lib/procdata.c: splitted into + procstate.c, procuid.c, procmem.c, proctime.c, + procsignal.c, prockernel.c and procsegment.c + + * include/glibtop/procdata.h: splitted into + procstate.h, procuid.h, procmem.h, proctime.h, + procsignal.h, prockernel.h and procsegment.h + +1998-05-10 Martin Baulig + + * sysdeps/osf1: port to OSF1 has been made. + +1998-05-07 Martin Baulig + + * sysdeps/guile/sysdeps.c: changes to reflect the + new flags of procdata. + + * sysdeps/common/sysdeps.c: changes to reflect the + new flags of procdata. + + * sysdeps/linux/procdata.c: 'flags' member is now + 'unsigned long flags [2]'. When we give + glibtop_get_procdata () a pid of zero, only + the flags are returned. + + * sysdeps/linux: now using static constant instead + of #define for sysdeps. + + * include/glibtop/procdata.h: flags is now + 'unsigned long flags [2]'. + + * examples/first.c: output sysdeps + +1998-05-03 Martin Baulig + + * ltconfig.diff: ugly hack: when cross compiling, we assume + building shared libraries work. + +1998-05-02 Martin Baulig + + * sysdeps/stub/init.c: new file - initializes global server. + + * sysdeps/linux/init.c: new file - initializes global server. + + * lib/init.c: new file - initializes global server. + + * glibtop.h: global changes to the interfaces, all functions except + glibtop_open() and glibtop_close() that took a server argument have + now a '__r' suffix; the original name is now a macro that uses + glibtop_global_server. + +1998-04-12 Martin Baulig + + * sysdeps/linux/open.c: we set server->os_version_code here, + copied from gnome-utils/gtop/proc/version.c + + * sysdeps/linux/procdata.c: added implementation for this feature, + mainly copied from gnome-utils/gtop/proc/readproc.c + + * glibtop.h: added os_version_code member to struct _glibtop + + * src/server/Makefile.am: moved here from src + + * src/server/version.c: moved here from src + + * src/server/output.c: moved here from src + + * src/server/main.c: moved here from src + + * src/mico/server.cc: new file - simple mico client + + * src/mico/client.cc: new file - simple mico client + + * src/mico/proclist.idl: new file - simple mico interface + + * src/version.c: moved to src/server + + * src/output.c: moved to src/server + + * src/main.c: moved to src/server + +1998-04-11 Martin Baulig + + * doc/libgtop.sgml: added chapter on how to extend the library + + * sysdeps/names/procdata.c: new file - names for glibtop_procdata + + * sysdeps/linux/procdata.c: new file - copy from sysdeps/stub + + * sysdeps/stub/procdata.c: new file - stub for glibtop_procdata + + * sysdeps/guile/names/procdata.c: new file - guile names for glibtop_procdata + + * sysdeps/guile/procdata.c: new file - guile interface for glibtop_procdata + + * lib/procdata.c: new file - library function for glibtop_procdata + + * include/glibtop/procdata.h: new file - interface for glibtop_procdata - + get detailed information about a process + +1998-04-10 Martin Baulig + + * doc/libgtop.sgml: wrote some more documentation + + * NEWS: Added new directory sysdeps/guile/names. It is the guile interface + to the gtop_names library found in sysdeps/names. Changed + GLIBTOP_DESCRIPTIONS to GLIBTOP_NAMES and added GLIBTOP_GUILE_NAMES + to the header files. + + * sysdeps/guile/names/boot.c: new file - added also + cpu.c, mem.c, swap.c, uptime.c, loadavg.c, shm_limits.c, + msg_limits.c, sem_limits.c, proclist.c and sysdeps.c + to this directory. + + * sysdeps/guile/cpu.c: bugfixes + + * sysdeps/guile/proclist.c: bugfixes + + * sysdeps/names/sysdeps.c (glibtop_labels_sysdeps): more verbose now + + * examples/third.c: added gtop_guile_names library + + * doc/libgtop.sgml: documented guile interface + + * glibtop.h: changed GLIBTOP_DESCRIPTIONS to GLIBTOP_NAMES; + added GLIBTOP_GUILE_NAMES when we have the gtop_guile_names + library added in sysdeps/guile/names + +1998-04-09 Martin Baulig + + * NEWS: Added new directories guile and names to sysdeps. In names are + some string constants about the data stored in the structures. + guile is a guile interface for the library. It is used in + examples /third (which has been completely rewritten). + The header files define things from names when GLIBTOP_DESCRIPTIONS + if defined and/or from guile when HAVE_GUILE is defined. + + * sysdeps/names/cpu.c: new file, also added + cpu.c, mem.c, swap.c, uptime.c loadavg.c, shm_limits.c, + msg_limits.c, sem_limits.c, proclist.c and sysdeps.c to + this directory + + * sysdeps/guile/boot.c: new file, also added + cpu.c, mem.c, swap.c, uptime.c loadavg.c, shm_limits.c, + msg_limits.c, sem_limits.c, proclist.c and sysdeps.c to + this directory + + * sysdeps/common/sem_limits.c: moved to sysdeps/names + + * sysdeps/common/msg_limits.c: moved to sysdeps/names + + * sysdeps/common/sem_limits.c: moved to sysdeps/names + + * examples/third.c: completely rewritten - simple guile interpreter linked + with libgtop_guile + + * examples/second.c: removed + +1998-04-08 Martin Baulig + + * ANNOUNCE: new file + + * examples/third.scm: new file - sample guile file + + * examples/third.c: new file - guile wrapper for libgtop + + * examples/second.c: new file - simple guile test from guile-tut.info + + * README: new file + + * libgtop-mirror.sh: new file: mirror script for my web site + + * doc/dbtohtml.dsl: renamed to libgtop.dsl + +1998-04-06 Martin Baulig + + * lib/command.c: some changes in the interface + + * src/main.c: some changes in the interface, we can now return + some arbitrary data + + * lib/proclist.c: new file - library function for glibtop_proclist + + * sysdeps/linux/proclist.c: new file - implementation for glibtop_proclist + + * sysdeps/stub/proclist.c: new file - stub for glibtop_proclist + + * include/glibtop/proclist.h: new file - glibtop_proclist + + * include/glibtop/union.h: new file + + * lib/read_data.c: new file + + * include/glibtop/read_data.h: new file + + * sysdeps/common/xmalloc.c: new file - moved here from lib + + * sysdeps/common/error.c: new file - moved here from lib + + * lib/xmalloc.c: moved to sysdeps/common + + * lib/error.c: moved to sysdeps/common + +1998-04-05 Martin Baulig + + * lib/shm_limits.c: new file - library function for + glibtop_shm_limits + + * lib/msg_limits.c: new file - library function for + glibtop_msg_limits + + * lib/sem_limits.c: new file - library function for + glibtop_sem_limits + + * sysdeps/linux/shm_limits.c: new file - implementation for + glibtop_shm_limits + + * sysdeps/linux/msg_limits.c: new file - implementation for + glibtop_msg_limits + + * sysdeps/linux/sem_limits.c: new file - implementation for + glibtop_sem_limits + + * sysdeps/stub/shm_limits.c: new file - stub for + glibtop_shm_limits + + * sysdeps/stub/msg_limits.c: new file - stub for + glibtop_msg_limits + + * sysdeps/stub/sem_limits.c: new file - stub for + glibtop_sem_limits + + * sysdeps/common/shm_limits.c: new file - limit names + + * sysdeps/common/msg_limits.c: new file - limit names + + * sysdeps/common/sem_limits.c: new file - limit names + + * include/glibtop/shm_limits.h: new file - glibtop_shm_limits + + * include/glibtop/msg_limits.h: new file - glibtop_msg_limits + + * include/glibtop/sem_limits.h: new file - glibtop_sem_limits + + * sysdeps/common/sysdeps.c: moved here from sysdeps/stub + + * sysdeps/linux/sysdeps.c: moved to sysdeps/common + + * sysdeps/stub/sysdeps.c: moved to sysdeps/common + + * sysdeps/stub/ipc_limits.c: splitted info shm_limits.c, msg_limits.c + and sem_limits.c + + * sysdeps/linux/ipc_limits.c: splitted into shm_limits.c, msg_limits.c + and sem_limits.c + + * lib/ipc_limits.c: splitted into shm_limits.c, msg_limits.c + and sem_limits.c + + * include/ipc_limits.h: splitted into shm_limits.h, msg_limits.h + and sem_limits.s + + * lib/ipc_limits.c: new file - library function for + glibtop_ipc_limits + + * sysdeps/linux/ipc_limits.c: new file - implementation for + glibtop_ipc_limits + + * sysdeps/stub/ipc_limits.c: new file - stub for + glibtop_ipc_limits + + * include/glibtop/ipc_limits.h: new file - glibtop_ipc_limits - + sysv ipc limits + + * doc/libgtop.sgml: worked on documentation + + * lib/uptime.c: new file - library function for + glibtop_uptime + + * lib/loadavg.c: new file - library function for + glibtop_loadavg + + * lib/sysinfo.c: removed - splitted into + uptime.c and loadavg.c + + * sysdeps/linux/uptime.c: new file - implementation for + glibtop_uptime + + * sysdeps/linux/loadavg.c: new file - implementation for + glibtop_loadavg + + * sysdeps/linux/sysinfo.c: removed - splitted into + uptime.c and loadavg.c + + * sysdeps/stub/uptime.c: new file - stub for + glibtop_uptime + + * sysdeps/stub/loadavg.c: new file - stub for + glibtop_loadavg + + * sysdeps/stub/sysinfo.c: removed - splitted into + uptime.c and loadavg.c + + * src/main.c: added GLIBTOP_CMND_UPTIME and + GLIBTOP_CMND_LOADAVG implementation + + * include/glibtop/loadavg.h: new file - glibtop_loadavg + + * include/glibtop/uptime.h: new file - glibtop_uptime + + * include/glibtop/loadavg.h: removed - splitted into + uptime.h and loadavg.h + + * src/main.c: added GLIBTOP_CMND_SYSDEPS implementation + + * lib/sysdeps.c: new file - library function for glibtop_sysdeps + + * sysdeps/linux/sysdeps.c: new file - copied from sysdeps/stub + + * sysdeps/stub/sysdeps.c: new file - implementation for glibtop_sysinfo - + this is really the implementation and not just a stub + + * src/sysdeps.c: moved to sysdeps/stub - this file is now part + of the library + + * lib/sysinfo.c: new file - library function for glibtop_sysinfo + + * sysdeps/linux/sysinfo.c: new file - linux version for glibtop_sysinfo + + * sysdeps/stub/sysinfo.c: new file - stub for glibtop_sysinfo + + * include/glibtop/sysinfo.h: new file - provides uptime, idle time + and load averange. + + * po/libgtop.pot: removed file + + * sysdeps/linux/cpu.c: using long unsigned format + * sysdeps/linux/mem.c: using long usigned format + * sysdeps/linux/swap.c: using long unsigned format + * examples/first.c: using long unsigned format + + * initial version. + diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..2099840 --- /dev/null +++ b/INSTALL @@ -0,0 +1,370 @@ +Installation Instructions +************************* + +Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation, +Inc. + + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. + +Basic Installation +================== + + Briefly, the shell command `./configure && make && make install' +should configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. Caching is +disabled by default to prevent problems with accidental use of stale +cache files. + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. + + The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. + + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package, generally using the just-built uninstalled binaries. + + 4. Type `make install' to install the programs and any data files and + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. + +Installation Names +================== + + By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS + KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf limitation. Until the limitation is lifted, you can use +this workaround: + + CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..9cb4939 --- /dev/null +++ b/Makefile.am @@ -0,0 +1,30 @@ +ACLOCAL_AMFLAGS = -I m4 + +if EXAMPLES +EXAMPLES_DIR = examples +else +EXAMPLES_DIR = +endif + +SUBDIRS = po misc include sysdeps lib src $(EXAMPLES_DIR) doc + +libgtopinclude_HEADERS = glibtop.h libgtopconfig.h +libgtopincludedir = $(includedir)/libgtop-2.0 + +EXTRA_DIST = autogen.sh libgtop.spec.in copyright.txt \ + features.def libgtopconfig.h.in \ + libgtop-sysdeps.m4 README \ + libgtop-2.0.pc.in acinclude.m4 \ + libgtop.doap \ + m4/introspection.m4 + +dist-hook: + cp libgtop.spec $(distdir) + +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = libgtop-2.0.pc + +libgtop-features.def: features.def + @LN_S@ $< $@ + +DISTCHECK_CONFIGURE_FLAGS=--enable-gtk-doc --enable-introspection diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..230c38a --- /dev/null +++ b/Makefile.in @@ -0,0 +1,998 @@ +# Makefile.in generated by automake 1.15 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2014 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/iconv.m4 \ + $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \ + $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ + $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ + $(top_srcdir)/acinclude.m4 $(top_srcdir)/libgtop-sysdeps.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) $(libgtopinclude_HEADERS) \ + $(am__DIST_COMMON) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = libgtop.spec libgtop-2.0.pc libgtopconfig.h +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(pkgconfigdir)" \ + "$(DESTDIR)$(libgtopincludedir)" +DATA = $(pkgconfig_DATA) +HEADERS = $(libgtopinclude_HEADERS) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + cscope distdir dist dist-all distcheck +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ + $(LISP)config.h.in +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +DIST_SUBDIRS = po misc include sysdeps lib src examples doc +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(srcdir)/libgtop-2.0.pc.in $(srcdir)/libgtop.spec.in \ + $(srcdir)/libgtopconfig.h.in ABOUT-NLS AUTHORS COPYING \ + ChangeLog INSTALL NEWS README TODO compile config.guess \ + config.rpath config.sub install-sh ltconfig ltmain.sh missing +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +GZIP_ENV = --best +DIST_ARCHIVES = $(distdir).tar.xz +DIST_TARGETS = dist-xz +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +ACLOCAL_AMFLAGS = -I m4 +ALLOCA = @ALLOCA@ +AMTAR = @AMTAR@ +AM_CPPFLAGS = @AM_CPPFLAGS@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DL_LIB = @DL_LIB@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +GLIB_CFLAGS = @GLIB_CFLAGS@ +GLIB_LIBS = @GLIB_LIBS@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +GTKDOC_CHECK = @GTKDOC_CHECK@ +GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ +GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ +GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ +GTKDOC_MKPDF = @GTKDOC_MKPDF@ +GTKDOC_REBASE = @GTKDOC_REBASE@ +HTML_DIR = @HTML_DIR@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ +INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ +INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ +INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ +INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ +INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ +INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ +INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ +KVM_LIBS = @KVM_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBGTOP_BINDIR = @LIBGTOP_BINDIR@ +LIBGTOP_EXTRA_LIBS = @LIBGTOP_EXTRA_LIBS@ +LIBGTOP_INCS = @LIBGTOP_INCS@ +LIBGTOP_LIBS = @LIBGTOP_LIBS@ +LIBGTOP_MAJOR_VERSION = @LIBGTOP_MAJOR_VERSION@ +LIBGTOP_MICRO_VERSION = @LIBGTOP_MICRO_VERSION@ +LIBGTOP_MINOR_VERSION = @LIBGTOP_MINOR_VERSION@ +LIBGTOP_SERVER = @LIBGTOP_SERVER@ +LIBGTOP_SERVER_VERSION = @LIBGTOP_SERVER_VERSION@ +LIBGTOP_VERSION = @LIBGTOP_VERSION@ +LIBGTOP_VERSION_CODE = @LIBGTOP_VERSION_CODE@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +LT_VERSION_INFO = @LT_VERSION_INFO@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +libgtop_have_sysinfo = @libgtop_have_sysinfo@ +libgtop_need_server = @libgtop_need_server@ +libgtop_postinstall = @libgtop_postinstall@ +libgtop_sysdeps_dir = @libgtop_sysdeps_dir@ +libgtop_top_builddir = @libgtop_top_builddir@ +libs_xauth = @libs_xauth@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +server_programs = @server_programs@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +sysdeps_dir = @sysdeps_dir@ +sysdeps_suid_lib = @sysdeps_suid_lib@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +@EXAMPLES_FALSE@EXAMPLES_DIR = +@EXAMPLES_TRUE@EXAMPLES_DIR = examples +SUBDIRS = po misc include sysdeps lib src $(EXAMPLES_DIR) doc +libgtopinclude_HEADERS = glibtop.h libgtopconfig.h +libgtopincludedir = $(includedir)/libgtop-2.0 +EXTRA_DIST = autogen.sh libgtop.spec.in copyright.txt \ + features.def libgtopconfig.h.in \ + libgtop-sysdeps.m4 README \ + libgtop-2.0.pc.in acinclude.m4 \ + libgtop.doap \ + m4/introspection.m4 + +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = libgtop-2.0.pc +DISTCHECK_CONFIGURE_FLAGS = --enable-gtk-doc --enable-introspection +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +config.h: stamp-h1 + @test -f $@ || rm -f stamp-h1 + @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +libgtop.spec: $(top_builddir)/config.status $(srcdir)/libgtop.spec.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +libgtop-2.0.pc: $(top_builddir)/config.status $(srcdir)/libgtop-2.0.pc.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +libgtopconfig.h: $(top_builddir)/config.status $(srcdir)/libgtopconfig.h.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt +install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ + done + +uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) +install-libgtopincludeHEADERS: $(libgtopinclude_HEADERS) + @$(NORMAL_INSTALL) + @list='$(libgtopinclude_HEADERS)'; test -n "$(libgtopincludedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(libgtopincludedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libgtopincludedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libgtopincludedir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(libgtopincludedir)" || exit $$?; \ + done + +uninstall-libgtopincludeHEADERS: + @$(NORMAL_UNINSTALL) + @list='$(libgtopinclude_HEADERS)'; test -n "$(libgtopincludedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(libgtopincludedir)'; $(am__uninstall_files_from_dir) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-hook + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz + $(am__post_remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) + +dist-tarZ: distdir + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__post_remove_distdir) + +dist-shar: distdir + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz + $(am__post_remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__post_remove_distdir) + +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build/sub \ + && ../../configure \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + --srcdir=../.. --prefix="$$dc_install_base" \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile $(DATA) $(HEADERS) config.h +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(libgtopincludedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr \ + distclean-libtool distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: install-libgtopincludeHEADERS install-pkgconfigDATA + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-libgtopincludeHEADERS uninstall-pkgconfigDATA + +.MAKE: $(am__recursive_targets) all install-am install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ + am--refresh check check-am clean clean-cscope clean-generic \ + clean-libtool cscope cscopelist-am ctags ctags-am dist \ + dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ + dist-tarZ dist-xz dist-zip distcheck distclean \ + distclean-generic distclean-hdr distclean-libtool \ + distclean-tags distcleancheck distdir distuninstallcheck dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-libgtopincludeHEADERS \ + install-man install-pdf install-pdf-am install-pkgconfigDATA \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-libgtopincludeHEADERS \ + uninstall-pkgconfigDATA + +.PRECIOUS: Makefile + + +dist-hook: + cp libgtop.spec $(distdir) + +libgtop-features.def: features.def + @LN_S@ $< $@ + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/NEWS b/NEWS new file mode 100644 index 0000000..3135df7 --- /dev/null +++ b/NEWS @@ -0,0 +1,637 @@ +11 September 2017: Overview of changes in 2.38.0 +================================================ + +* Updated translations + +04 September 2017: Overview of changes in 2.37.92 +================================================ + +* Updated translations +* Code cleanup + +07 August 2017: Overview of changes in 2.37.90 +================================================ + +* Added reserved fields to the sysdeps struct +* Updated translations +* Fixed build failure in FreeBSD 11 + +22 May 2017: Overview of changes in 2.37.2 +================================================ + +* Added support for per-process io monitoring + * Linux + * FreeBSD +* Updated translations +* Added nullpointer check +* Use unicode in translatable strings + +20 March 2017: Overview of changes in 2.36.0 +================================================ + +* Version bumped + +13 March 2017: Overview of changes in 2.35.92 +================================================ + +* Better output format for arrays + +13 February 2017: Overview of changes in 2.35.90 +================================================ + +* Linux: + - Use dynamically allocated cpu buffer + - Do not cache getpagesize() + - Use faster g_ascii_isspace in tokenization + - Ignore paragraphs not describing a CPU/core + +* Updated translations +* Added more gettext options + +16 January 2017: Overview of changes in 2.34.2 +================================================ + +* Linux: + - fill last_processor member + +* Updated translations +* Added more gettext options + +20 August 2016: Overview of changes in 2.34.1 +================================================ + +* FreeBSD: + - rewrite netload to use official APIs + - mark wireless interfaces as such + +* All + - rename --with-libgtop-examples to --with-examples + - use gettext instead of intltool/glib-gettext + - added Language headers to the translations + + +Special thanks to Gleb Smirnoff, Antoine Brodin, Koop Mast and Ting-Wei Lan for +the FreeBSD fixes, to Javier Jardón for the gettext migration and to Piotr Drąg +for adding the Language headers. + +22 March 2016: Overview of changes in 2.34.0 +================================================ + +* Stable release + +29 February 2016: Overview of changes in 2.33.91 + +* Updated translations +* Fix building on must-libc + +18 January 2016: Overview of changes in 2.33.4 + +* On OpenBSD only PID 1 is special +* Call setlocale in main + +14 December: Overview of changes in 2.33.3 + +* Fixed borken compilation on OpenBSD +* Updated translations. + +21 September 2015: Overview of changes in 2.32.0 + +* Stable release + +14 September 2015: Overview of changes in 2.31.91 +================================================ +* Darwin: + - Fixed build. + +* All + - GI docs fixes + - include fixes + - Updated translations + +16 August 2015: Overview of changes in 2.31.90 +============================================= +* ABI changes: + - ABI was inconsistent on platforms like FreeBSD which make use of + glibtop_machine. The ABI was actually different between the + library and the server. Fixed this by simply always defining + glibtop_machine in glibtop struct. + - Add Pss and Swap members in glibtop_proc_mem. + - This is the second ABI breakage in since 2.28 (the first one was + bumping NCPU), there were no release for 2.30. + +* FreeBSD: + - proclist: exclude the "idle" kernel process when GLIBTOP_EXCLUDE_IDLE. + - Remove extraneous glibtop_init() calls. + +* Linux: + - proc_mem: implement Pss and Swap. + - Remove extraneous glibtop_init() calls. + +* All: + - Propagate the change that machine in struct glibtop is now a + pointer. Hope that change doesn't break build on other platforms, + I can only test Linux and FreeBSD. + + +5 August 2015: Overview of changes in 2.31.4 +============================================= +* 71 commits ! +* Implement a proper --enable-debug mode. +* FreeBSD: + - procstate: set process name for kernel (pid=0) + - procmap: get dev/inode for ZFS (no filename yet) + - mem: rework memory usage to something more meaningful + - proclist: don't report threads + - proctime: fix CPU times +* Linux: + - mem: use MemAvailable when available + - mem: match `free`, report Slab as Cached. + - support for x.y versionsmemory to match `free` +* Fix a lot of GI tags: it now works without crashing. +* Server and daemon binaries are now dynamically linked against their libgtop. +* Update a lot of examples/. +* Clean up some very old code. +* Updated translations. + +Special thanks to Ting-Wei Lan for providing patches and feedback on FreeBSD. + +22 June 2015: Overview of changes in 2.31.3 +============================================= +* Numerous OpenBSD backend fixes. +* Fixed FreeBSD build issues. +* Implemented procaffinity support for NetBSD. +* Updated translations + +19 August 2013: Overview of changes in 2.28.5 +============================================= +* Fix numerous bugs in the OpenBSD backend. +* Updated translations. + +30 August 2011: Overview of changes in 2.28.4 +============================================= +* Fix numerous bugs in the FreeBSD backend. +* Split off OpenBSD code in its own backend, and fixes. +* Updated translations. + +25 March 2011: Overview of changes in 2.28.3 +================================================ +* Fix build issue for strict linkers. +* Add Introspection support +* Cygwin fixes. +* FreeBSD: Fix get_mem() on 64-bit systems. +* Updated translations. + +28 September 2010: Overview of changes in 2.28.2 +================================================ +* Updated translations. + +30 March 2010: Overview of changes in 2.28.1 +============================================ +* Updated translations. + +21 September 2009: Overview of changes in 2.28.0 +================================================ +* Updated translations. + +25 May 2009: Overview of changes in 2.27.3 +========================================== +* linux: + - fixed format error. + +3 May 2009: Overview of changes in 2.27.2 +========================================= +* linux: + - glibtop_get_proc_map: oops, fixed segfault. + +3 May 2009: Overview of changes in 2.27.1 +========================================= +* linux: + - glibtop_get_proc_map is ~40% faster. This should be noticeable + in system-monitor. +* New cygwin support. + +13 April 2009: Overview of changes in 2.26.1 +============================================ +* linux: + - glibtop_get_mounlist(...): also hide "none" fs. + +1 Mars 2009: Overview of changes in 2.26.0 +========================================== +* Nothing. + +17 February 2009: Overview of changes in 2.25.91 +================================================ +* Synced with gnome-2-24. + +19 January 2009: Overview of changes in 2.24.4 +============================================== +* Fixed license: libgtop is GPL-2. + +12 January 2009: Overview of changes in 2.24.3 +============================================== +* linux: + - fixed potential memory leak. Vincent Untz. + - fixed read(2) usage. Should fix the missing cpus bug in system-monitor. +* darwin: + - fixed build. "paul". + +22 Septembre 2008: Overview of changes in 2.24.0 +================================================ +* Translation updates. + +18 August 2008: Overview of changes in 2.23.90 +============================================== +* freebsd: + - updated port by Joe Marcus Clarke. + +23 June 2008: Overview of changes in 2.23.4 +=========================================== +* linux: + - Fixed and improved glibtop_get_fsusage with kernel >= 2.6.25. + Closes #539360. + +24 May 2008: Overview of changes in 2.23.2 +========================================== +* glibtop_get_proc_open_files API can also lists IPv6 TCP sockets. +* glibtop_get_proc_affinity : new API to retrieve process CPU affinity. + +(Let's hope one day i'll find the gtk-doc documentation ...) + +* linux: + - fixed parsing of big /proc/stat for uptime. + +04 April 2008: Overview of changes in 2.22.1 +============================================ +* Fixed compilation/dist for !linux. + Closes #525953. + +10 Mars 2008: Overview of changes in 2.22.0 +=========================================== +* linux: + - fixed proc_kernel. + +25 February 2008: Overview of changes in 2.21.92 +================================================ +* linux: + - fixed smaps parsing on >= 2.6.24.x. + +14 January 2008: Overview of changes in 2.21.5 +============================================== +* freebsd: + - fixed build on GNU/kfreebsd. Petr Salinger. + - fixed procmem units. Kuang-che Wu. + +28 October 2007: Overview of changes in 2.21.1 +============================================== +* don't export _p/_s private symbols anymore. This is not an API/ABI breakage. +* darwin implementation by Benjamin Reed. +* linux: + - splitted fsusage and mountlist implementations; + - smarter mountlist(allfs = False); + - fixed some compile warning on 64bit; +* solaris: + - fixed netload build by Henry Zhang. + +16 September 2007: Overview of changes in 2.20.0 +================================================ +* Updated translations. + +27 August 2007: Overview of changes in 2.19.92 +============================================== +* Fixed stupid hardwired path in linux/sysinfo.c + +26 August 2007: Overview of changes in 2.19.91 +============================================== +* Translations updates. +* linux: + - Small internal improvement. Might fix sysinfo when having more than + 8 CPUS. + +9 July 2007: Overview of changes in 2.19.5 +========================================== +* linux: + - fixed proc_map for >= 2.6.22 +* freebsd: + - implemented procwd and procopenfiles + Joe Marcus Clarke + +18 June 2007: Overview of changes in 2.19.4 +=========================================== +* solaris: + - fixed build. Damien Carbery. + +3 June 2007: Overview of changes in 2.19.3 +========================================== +* Small API change. get_proclist returns pid_t instead of unsigned + for consistency. +* linux: + - fixed an typo bug in open_files. + - got rid of useless glibtop_init_s calls. +* Enable example build by defaut. +* Dropped G_GNUC_INTERNAL attributes no longer needed. + This will please people trying to implement G_GNUC macro with a non + GNU Compiler. + +13 May 2007: Overview of changes in 2.19.2 +========================================== +* This is the first release of the 2.19.x series. +* Got rid of inodedb (you don't even know what it is ;) +* New unstable API glibtop_get_proc_wd to get working directories of + a process. +* Fixed OpenBSD build. Jasper Lievisse Adriaanse. + +25 February 2007: Overview of changes in 2.14.8 +=============================================== +* bsd implementations have been splitted by Joe Marcus Clarke + and Alexander Nedotsukov. (k)freeBSD now has a separate implementation. + +February 10, 2007: Overview of changes in 2.14.7 +================================================ +* bsd: + - massive kfreeBSD and FreeBSD updates by Roy Marples and Petr Salinger. +* mountlist can now ignore objfs and ctfs filesystems. +* fsusage won't return bavail > bfree anymore. + +January 14, 2007: Overview of changes in 2.14.6 +=============================================== +* linux: + - fixed stack overflow in glibtop_get_proc_map + - fixed handling of long filenames in glibtop_get_proc_map and glibtop_get_proc_open_files. + - micro-optimization + +December 3, 2006: Overview of changes in 2.14.5 +=============================================== +* Added kfreebsd support (Petr Salinger ). +* Added solaris glibtop_get_proc_open_files (Henry Zhang ). +* Migrated to gtk-doc (Germán Poó-Caamaño ). +* glibtop_get_mountlist can now ignore nsfd FS. + +September 16, 2006: Overview of changes in 2.14.4 +================================================= +* Fixed linux maps/smaps parsing on 64bit kernel. + +September 5, 2006: Overview of changes in 2.14.3 +================================================ +* Fixed build with --as-needed. +* Added missing G_BEGIN_DECLS/G_END_DECLS. + +July 27, 2006: Overview of changes in 2.14.2 +============================================ +* Updated solaris support (hua.zhang@sun.com) +* Small linux updates and improvments. + +April 10, 2006: Overview of changes in 2.14.1 +============================================= +* Updated translations. +* Fixed NetBSD port (Julio M. Merino Vidal ). +* Fixed some warnings. + +Mars 13, 2006: Overview of changes in 2.14.0 +============================================ +* Updated translations. + +February 27, 2006: Overview of changes in 2.13.92 +================================================= +* Fixed proc_state documentation. +* Updated mountlist ignore list. + +January 23, 2006: Overview of changes in 2.13.3 +=============================================== +* linux: + - fixe get_procmap for linux < 2.6.14. + +January 2, 2006: Overview of changes in 2.13.2 +============================================== +* Fixed libtool versioning (James Henstridge) + +December 15, 2005: Overview of changes in 2.13.1 +================================================ +* linux: + - fixed proclist + - implemented server->real_ncpu + +December 13, 2005: Overview of changes in 2.13.0 +================================================ +* Requires automake-1.9 (James Henstridge) +* Supports up to 32 CPU +* Supports Linux smaps +* linux: fixed SMP detection + +This release is not ABI compatible with previous releases. Sorry. + +November 29, 2005: Overview of changes from 2.12.0 to 2.12.1 +============================================================ +* Dropped dead files +* linux: 1-line cleanup. + +September 4, 2005: Overview of changes from 2.11.92 to 2.12.0 +============================================================= +* Updated translations. + +August 22, 2005: Overview of changes from 2.11.91 to 2.11.92 +============================================================ +* Linux: + - fixed for 2.6 without /sys + - glibtop_get_cpu() : Do not add irq, softirq and iowait to idle. + +August 9, 2005: Overview of changes from 2.11.90 to 2.11.91 +=========================================================== +* All: + - cleaned some headers. + - removed static examples. +* Linux: + - fixed some issues with 2.6 without /sys + +July 24, 2005: Overview of changes from 2.11.2 to 2.11.90 +========================================================= +* Linux: + - fixed glibtop_uptime .flags. + +July &3, 2005: Overview of changes from 2.11.1 to 2.11.2 +======================================================== +* Linux: + - little improvements for 2.6. + +July 3, 2005: Overview of changes from 2.11.0 to 2.11.1 +======================================================= +* Linux: + - glibtop_get_swap : added page(in|out) for linux 2.6. + +June 8, 2005: Overview of changes from 2.10.x to 2.11.0 +======================================================= +* Replaced a lot of macros by functions +* Got rid of dozens of useless files. +* libgtop 2.11.x are and will stay API and ABI compatible with 2.10.x, i swear. + +April 10, 2005: Overview of changes from 2.10.0 to 2.10.1 +========================================================= +* Updated i18n. +* Little cleanup and fixed gcc-4.0 compilation. +* linux: fixed loadavg and uptime if locale != C. + Updated siglist. +* Tighter libgtop-2.0.pc. + +Mars 7, 2005: Overview of Changes from 2.9.92 to 2.10.0 +======================================================= +* Updated i18n. + +February 28, 2005: Overview of Changes from 2.9.90 to 2.9.92 +============================================================ +* *BSD updated by marcus@freebsd.org (Joe Marcus Clarke). +* Removed a lot of dead files :) +* Don't build&install libgtop_daemon when it's never used. + +February 6, 2004: Overview of Changes from 2.9.90 to 2.9.91 +========================================================== +* Fixed typo in stub. +* Updated i18n. + +January 24, 2004: Overview of Changes from 2.9.4 to 2.9.90 +========================================================== +* Updated Linux support. + +January 10, 2004: Overview of Changes from 2.9.3 to 2.9.4 +========================================================= +* New glibtop_proc_open_files nick@reloco.com.ar (Nicolás Lichtmaier). +* Updated AIX support (Christophe Belle). + +December 20, 2004: Overview of Changes from 2.9.0 to 2.9.3 +========================================================== +* Removed libgtop_names. +* Fixed Argument passing between library and server. #139809. +* *BSD updated by marcus@freebsd.org (Joe Marcus Clarke). +* glibtop_get_mountlist(False) now ignores 'unknown' fs. + + +November 30, 2004: Overview of Changes from 2.8.1 to 2.9.0 +========================================================= +* glibtop_get_netload : Fixed segfault on linux with ppp devices. +* NEW glibtop_get_netlist : retrieves the list of all available interfaces. +* NEW LIBGTOP_CHECK_VERSION(major, minor, micro) +* Removed dead kernel patch and implementation. +* Cleanups on Linux and Solaris. + +October 11, 2004: Overview of Changes from 2.8.0 to 2.8.1 +========================================================= +* Improved Solaris and AIX support. + + +August 13, 2004: Overview of Changes from 2.7.92 to 2.8.0 +========================================================= +* No changes + + +August 30, 2004: +=============== +* Applied some *BSD patches. +* Removed old files. + + +August 15, 2004: +=============== +* Fixed compilation with C89-only compilers and old libc. + + +August 3, 2004: +============== +* Some cleanups. +* Fixed the behaviour of some linux proc_*() functions. +* Updated the documentation. + + +July 19, 2004: Overview of Changes from 2.6.1 to 2.7.4 +====================================================== +* Plenty of code cleanups. Uninlined a lot of functions. ~5-10KB object size + reduction. +* Glibify a bit more. +* API changes: + - glibtop_fsusage provides total read and writes since boot_time. + - glibtop_netload provides hardware address. IPv6 enable. + - Added glibtop_get_proc_argv. + +Work in progress : +* Finish glibtop_fsusage implementation for Linux. +* Some fuctions don't conform to the documentation, e.g. proctime. + +March 11, 2004: +=============== + +* Released LibGTop 2.5.99 "Gross Work", dedicated to people who do push-ups + in the loos. + + - plenty of code cleanups + + - removed the dependency on libgnome, only glib required now + + - Linux 2.6 support, NetBSD support and better FreeBSD support + + - Make the block size available for filesystem statistics + +February 27, 2001: +================= + +* Released LibGTop 1.0.12 "Gerolzhofen". + + - fix for Solaris 8 from Laszlo PETER (msg_limits, sem_limits). + + - fix for FreeBSD 4.2 from Rolf Grossmann (FreeBSD now uses + `_KERNEL' instead of `KERNEL'). Bug #51334. + + - for BSDI, comment out `subnet' field in netload; this should make + it compile, but there may be other problems. Bug #13345. + + This release is for GNOME 1.4 Beta2. + +February 14, 2001: +================= + +* Released LibGTop 1.0.11 "Jasmin": + + [The release which was supposed to be called "Gerolzhofen".] + + - merged in the Solaris code from LIBGTOP_1_1_2_PATCHES. + + - minor OpenBSD fixes. + + - again a bunch of updated translations. + + Please test the Solaris stuff and report and bugs and + problems as soon as possible; I'll make a new release + for the 2nd beta of GNOME 1.4 if necessary. + +November 20, 2000: +================= + +* Released LibGTop 1.0.10 "November Rain": + + - this release contains a bunch of updated translations. + +May 25, 2000: +============ + +* Released LibGTop 1.0.9 "Stuttgart". + + (LibGTop 1.0.8 "Frankfurt" was not publically released.) + +February 15, 2000: +================= + +* Released LibGTop 1.0.7 "Copenhagen": + + - this is a bug fix release for the GUADEC CD-ROM; + it contains fixes in both the Linux and *BSD sysdeps + directory. + +October 18, 1999: +================ + +* Released LibGTop 1.0.6 "October LibGTop": + + - compilation fixes for FreeBSD. + - updated reference manual. + +September 29, 1999: +================== + +* Released LibGTop 1.0.5. + diff --git a/README b/README new file mode 100644 index 0000000..812a366 --- /dev/null +++ b/README @@ -0,0 +1,20 @@ +LATEST NEWS: +=========== + +Please look also in the file 'NEWS' for latest news. + +Martin + + +ChangeLogs: +========== + +LibGTop has many ChangeLogs files. The following files are the the +most important : + +- ChangeLog is the main ChangeLog. +- sysdeps//ChangeLog is the ChangeLog for arch specific changes. +- sysdeps/common/ChangeLog is the ChangeLog for common changes (shared + implementation between archs). + +Benoît diff --git a/TODO b/TODO new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/TODO diff --git a/acinclude.m4 b/acinclude.m4 new file mode 100644 index 0000000..79e0b37 --- /dev/null +++ b/acinclude.m4 @@ -0,0 +1,525 @@ +dnl This is just copied m4s from need-declaration.m4 gnome-fileutils.m4 +dnl gnome-supprt-checks.m4 and a little from gnome-libgtop-check.m4 +dnl and finally libgtop-sysdeps.m4 + +dnl +dnl LIBGTOP_CHECK_TYPE +dnl +dnl Improved version of AC_CHECK_TYPE which takes into account +dnl that we need to #include some other header files on some +dnl systems to get some types. + +dnl AC_LIBGTOP_CHECK_TYPE(TYPE, DEFAULT) +AC_DEFUN([AC_LIBGTOP_CHECK_TYPE], +[AC_REQUIRE([AC_HEADER_STDC])dnl +AC_MSG_CHECKING(for $1) +AC_CACHE_VAL(ac_cv_type_$1, +[AC_EGREP_CPP(dnl +changequote(<<,>>)dnl +<<(^|[^a-zA-Z_0-9])$1[^a-zA-Z_0-9]>>dnl +changequote([,]), [#include +#if STDC_HEADERS +#include +#include +#endif + +/* For Tru64 */ +#ifdef HAVE_SYS_BITYPES_H +#include +#endif +], ac_cv_type_$1=yes, ac_cv_type_$1=no)])dnl +AC_MSG_RESULT($ac_cv_type_$1) +if test $ac_cv_type_$1 = no; then + AC_DEFINE($1, $2, [Define to $2 if does not define.]) +fi +]) + +dnl +dnl GNOME_LIBGTOP_TYPES +dnl +dnl some typechecks for libgtop. +dnl + +AC_DEFUN([GNOME_LIBGTOP_TYPES], +[ + AC_CHECK_HEADERS(sys/bitypes.h) +]) + +dnl See whether we need a declaration for a function. +dnl GCC_NEED_DECLARATION(FUNCTION [, EXTRA-HEADER-FILES]) +AC_DEFUN([GCC_NEED_DECLARATION], +[AC_MSG_CHECKING([whether $1 must be declared]) +AC_CACHE_VAL(gcc_cv_decl_needed_$1, +[AC_TRY_COMPILE([ +#include +#ifdef HAVE_STRING_H +#include +#else +#ifdef HAVE_STRINGS_H +#include +#endif +#endif +#ifdef HAVE_STDLIB_H +#include +#endif +#ifdef HAVE_UNISTD_H +#include +#endif +$2], +[char *(*pfn) = (char *(*)) $1], +eval "gcc_cv_decl_needed_$1=no", eval "gcc_cv_decl_needed_$1=yes")]) +if eval "test \"`echo '$gcc_cv_decl_needed_'$1`\" = yes"; then + AC_MSG_RESULT(yes) + gcc_need_declarations="$gcc_need_declarations $1" + gcc_tr_decl=NEED_DECLARATION_`echo $1 | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + AC_DEFINE_UNQUOTED($gcc_tr_decl, 1, [Define if $1 () must be declared.]) +else + AC_MSG_RESULT(no) +fi +])dnl + +dnl Check multiple functions to see whether each needs a declaration. +dnl GCC_NEED_DECLARATIONS(FUNCTION... [, EXTRA-HEADER-FILES]) +AC_DEFUN([GCC_NEED_DECLARATIONS], +[for ac_func in $1 +do +GCC_NEED_DECLARATION($ac_func, $2) +done +] +) + +dnl +dnl GNOME_FILEUTILS_CHECKS +dnl +dnl checks that are needed for the diskusage applet. +dnl + +AC_DEFUN([GNOME_FILEUTILS_CHECKS], +[ +AC_CHECK_HEADERS(fcntl.h sys/param.h sys/statfs.h sys/fstyp.h \ +mnttab.h mntent.h sys/statvfs.h sys/vfs.h sys/mount.h \ +sys/filsys.h sys/fs_types.h sys/fs/s5param.h) + +AC_CHECK_FUNCS(bcopy endgrent endpwent fchdir ftime ftruncate \ +getcwd getmntinfo gettimeofday isascii lchown \ +listmntent memcpy mkfifo strchr strerror strrchr vprintf) + +dnl Set some defaults when cross-compiling + +if test x$cross_compiling = xyes ; then + case "$host_os" in + linux*) + fu_cv_sys_mounted_getmntent1=yes + fu_cv_sys_stat_statfs2_bsize=yes + ;; + sunos*) + fu_cv_sys_stat_statfs4=yes + ;; + freebsd*) + fu_cv_sys_stat_statfs2_bsize=yes + ;; + osf*) + fu_cv_sys_stat_statfs3_osf1=yes + ;; + esac +fi + +# Determine how to get the list of mounted filesystems. +list_mounted_fs= + +# If the getmntent function is available but not in the standard library, +# make sure LIBS contains -lsun (on Irix4) or -lseq (on PTX). +AC_FUNC_GETMNTENT + +# This test must precede the ones for getmntent because Unicos-9 is +# reported to have the getmntent function, but its support is incompatible +# with other getmntent implementations. + +# NOTE: Normally, I wouldn't use a check for system type as I've done for +# `CRAY' below since that goes against the whole autoconf philosophy. But +# I think there is too great a chance that some non-Cray system has a +# function named listmntent to risk the false positive. + +if test -z "$list_mounted_fs"; then +# Cray UNICOS 9 +AC_MSG_CHECKING([for listmntent of Cray/Unicos-9]) +AC_CACHE_VAL(fu_cv_sys_mounted_cray_listmntent, +[fu_cv_sys_mounted_cray_listmntent=no +AC_EGREP_CPP(yes, +[#ifdef _CRAY +yes +#endif +], [test $ac_cv_func_listmntent = yes \ +&& fu_cv_sys_mounted_cray_listmntent=yes] +) +] +) +AC_MSG_RESULT($fu_cv_sys_mounted_cray_listmntent) +if test $fu_cv_sys_mounted_cray_listmntent = yes; then +list_mounted_fs=found +AC_DEFINE(MOUNTED_LISTMNTENT, 1, + [Define if there is a function named listmntent that can be used to list all mounted filesystems. [UNICOS]]) +fi +fi + +if test $ac_cv_func_getmntent = yes; then + +# This system has the getmntent function. +# Determine whether it's the one-argument variant or the two-argument one. + +if test -z "$list_mounted_fs"; then +# 4.3BSD, SunOS, HP-UX, Dynix, Irix +AC_MSG_CHECKING([for one-argument getmntent function]) +AC_CACHE_VAL(fu_cv_sys_mounted_getmntent1, +[test $ac_cv_header_mntent_h = yes \ +&& fu_cv_sys_mounted_getmntent1=yes \ +|| fu_cv_sys_mounted_getmntent1=no]) +AC_MSG_RESULT($fu_cv_sys_mounted_getmntent1) +if test $fu_cv_sys_mounted_getmntent1 = yes; then +list_mounted_fs=found +AC_DEFINE(MOUNTED_GETMNTENT1, 1, + [Define if there is a function named getmntent for reading the list of mounted filesystems, and that function takes a single argument. [4.3BSD, SunOS, HP-UX, Dynix, Irix]]) +fi +fi + +if test -z "$list_mounted_fs"; then +# SVR4 +AC_MSG_CHECKING([for two-argument getmntent function]) +AC_CACHE_VAL(fu_cv_sys_mounted_getmntent2, +[AC_EGREP_HEADER(getmntent, sys/mnttab.h, +fu_cv_sys_mounted_getmntent2=yes, +fu_cv_sys_mounted_getmntent2=no)]) +AC_MSG_RESULT($fu_cv_sys_mounted_getmntent2) +if test $fu_cv_sys_mounted_getmntent2 = yes; then +list_mounted_fs=found +AC_DEFINE(MOUNTED_GETMNTENT2, 1, + [Define if there is a function named getmntent for reading the list of mounted filesystems, and that function takes two arguments. [SVR4]]) +fi +fi + +if test -z "$list_mounted_fs"; then +AC_MSG_ERROR([could not determine how to read list of mounted filesystems]) +fi + +fi + +if test -z "$list_mounted_fs"; then +# DEC Alpha running OSF/1. +AC_MSG_CHECKING([for getfsstat function]) +AC_CACHE_VAL(fu_cv_sys_mounted_getsstat, +[AC_TRY_LINK([ +#include +#include +#include ], +[struct statfs *stats; +int numsys = getfsstat ((struct statfs *)0, 0L, MNT_WAIT); ], +fu_cv_sys_mounted_getsstat=yes, +fu_cv_sys_mounted_getsstat=no)]) +AC_MSG_RESULT($fu_cv_sys_mounted_getsstat) +if test $fu_cv_sys_mounted_getsstat = yes; then +list_mounted_fs=found +AC_DEFINE(MOUNTED_GETFSSTAT, 1, + [Define if there is a function named getfsstat for reading the list of mounted filesystems. [DEC Alpha running OSF/1]]) +fi +fi + +if test -z "$list_mounted_fs"; then +# AIX. +AC_MSG_CHECKING([for mntctl function and struct vmount]) +AC_CACHE_VAL(fu_cv_sys_mounted_vmount, +[AC_TRY_CPP([#include ], +fu_cv_sys_mounted_vmount=yes, +fu_cv_sys_mounted_vmount=no)]) +AC_MSG_RESULT($fu_cv_sys_mounted_vmount) +if test $fu_cv_sys_mounted_vmount = yes; then +list_mounted_fs=found +AC_DEFINE(MOUNTED_VMOUNT, 1, + [Define if there is a function named mntctl that can be used to read the list of mounted filesystems, and there is a system header file that declares `struct vmount.' [AIX]]) +fi +fi + +if test -z "$list_mounted_fs"; then +# SVR3 +AC_MSG_CHECKING([for FIXME existence of three headers]) +AC_CACHE_VAL(fu_cv_sys_mounted_fread_fstyp, +[AC_TRY_CPP([ +#include +#include +#include ], +fu_cv_sys_mounted_fread_fstyp=yes, +fu_cv_sys_mounted_fread_fstyp=no)]) +AC_MSG_RESULT($fu_cv_sys_mounted_fread_fstyp) +if test $fu_cv_sys_mounted_fread_fstyp = yes; then +list_mounted_fs=found +AC_DEFINE(MOUNTED_FREAD_FSTYP, 1, + [Define if (like SVR2) there is no specific function for reading the list of mounted filesystems, and your system has these header files: and . [SVR3]]) +fi +fi + +if test -z "$list_mounted_fs"; then +# 4.4BSD and DEC OSF/1. +AC_MSG_CHECKING([for getmntinfo function]) +AC_CACHE_VAL(fu_cv_sys_mounted_getmntinfo, +[ +ok= +if test $ac_cv_func_getmntinfo = yes; then +AC_EGREP_HEADER(f_type;, sys/mount.h, +ok=yes) +fi +test -n "$ok" \ +&& fu_cv_sys_mounted_getmntinfo=yes \ +|| fu_cv_sys_mounted_getmntinfo=no +]) +AC_MSG_RESULT($fu_cv_sys_mounted_getmntinfo) +if test $fu_cv_sys_mounted_getmntinfo = yes; then +list_mounted_fs=found +AC_DEFINE(MOUNTED_GETMNTINFO, 1, + [Define if there is a function named getmntinfo for reading the list of mounted filesystems. [4.4BSD]]) +fi +fi + +# FIXME: add a test for netbsd-1.1 here + +if test -z "$list_mounted_fs"; then +# Ultrix +AC_MSG_CHECKING([for getmnt function]) +AC_CACHE_VAL(fu_cv_sys_mounted_getmnt, +[AC_TRY_CPP([ +#include +#include ], +fu_cv_sys_mounted_getmnt=yes, +fu_cv_sys_mounted_getmnt=no)]) +AC_MSG_RESULT($fu_cv_sys_mounted_getmnt) +if test $fu_cv_sys_mounted_getmnt = yes; then +list_mounted_fs=found +AC_DEFINE(MOUNTED_GETMNT, 1, + [Define if there is a function named getmnt for reading the list of mounted filesystems. [Ultrix]]) +fi +fi + +if test -z "$list_mounted_fs"; then +# SVR2 +AC_MSG_CHECKING([whether it is possible to resort to fread on /etc/mnttab]) +AC_CACHE_VAL(fu_cv_sys_mounted_fread, +[AC_TRY_CPP([#include ], +fu_cv_sys_mounted_fread=yes, +fu_cv_sys_mounted_fread=no)]) +AC_MSG_RESULT($fu_cv_sys_mounted_fread) +if test $fu_cv_sys_mounted_fread = yes; then +list_mounted_fs=found +AC_DEFINE(MOUNTED_FREAD, 1, + [Define if there is no specific function for reading the list of mounted filesystems. fread will be used to read /etc/mnttab. [SVR2]]) +fi +fi + +if test -z "$list_mounted_fs"; then +AC_MSG_ERROR([could not determine how to read list of mounted filesystems]) +# FIXME -- no need to abort building the whole package +# Cannot build mountlist.c or anything that needs its functions +fi + +AC_CHECKING(how to get filesystem space usage) +space=no + +# Perform only the link test since it seems there are no variants of the +# statvfs function. This check is more than just AC_CHECK_FUNCS(statvfs) +# because that got a false positive on SCO OSR5. Adding the declaration +# of a `struct statvfs' causes this test to fail (as it should) on such +# systems. That system is reported to work fine with STAT_STATFS4 which +# is what it gets when this test fails. +if test $space = no; then +# SVR4 +AC_CACHE_CHECK([statvfs function (SVR4)], fu_cv_sys_stat_statvfs, +[AC_TRY_LINK([#include +#include ], +[struct statvfs fsd; statvfs (0, &fsd);], +fu_cv_sys_stat_statvfs=yes, +fu_cv_sys_stat_statvfs=no)]) +if test $fu_cv_sys_stat_statvfs = yes; then +space=yes +AC_DEFINE(STAT_STATVFS, 1, + [Define if there is a function named statvfs. [SVR4]]) +fi +fi + +if test $space = no; then +# DEC Alpha running OSF/1 +AC_MSG_CHECKING([for 3-argument statfs function (DEC OSF/1)]) +AC_CACHE_VAL(fu_cv_sys_stat_statfs3_osf1, +[AC_TRY_RUN([ +#include +#include +#include +int main () +{ +struct statfs fsd; +fsd.f_fsize = 0; +return (statfs (".", &fsd, sizeof (struct statfs))); +}], +fu_cv_sys_stat_statfs3_osf1=yes, +fu_cv_sys_stat_statfs3_osf1=no, +fu_cv_sys_stat_statfs3_osf1=no)]) +AC_MSG_RESULT($fu_cv_sys_stat_statfs3_osf1) +if test $fu_cv_sys_stat_statfs3_osf1 = yes; then +space=yes +AC_DEFINE(STAT_STATFS3_OSF1, 1, + [Define if statfs takes 3 args. [DEC Alpha running OSF/1]]) +fi +fi + +if test $space = no; then +# AIX +AC_MSG_CHECKING([for two-argument statfs with statfs.bsize dnl +member (AIX, 4.3BSD)]) +AC_CACHE_VAL(fu_cv_sys_stat_statfs2_bsize, +[AC_TRY_RUN([ +#ifdef HAVE_SYS_PARAM_H +#include +#endif +#ifdef HAVE_SYS_MOUNT_H +#include +#endif +#ifdef HAVE_SYS_VFS_H +#include +#endif +int main () +{ +struct statfs fsd; +fsd.f_bsize = 0; +return (statfs (".", &fsd)); +}], +fu_cv_sys_stat_statfs2_bsize=yes, +fu_cv_sys_stat_statfs2_bsize=no, +fu_cv_sys_stat_statfs2_bsize=no)]) +AC_MSG_RESULT($fu_cv_sys_stat_statfs2_bsize) +if test $fu_cv_sys_stat_statfs2_bsize = yes; then +space=yes +AC_DEFINE(STAT_STATFS2_BSIZE, 1, + [Define if statfs takes 2 args and struct statfs has a field named f_bsize. [4.3BSD, SunOS 4, HP-UX, AIX PS/2]]) +fi +fi + +if test $space = no; then +# SVR3 +AC_MSG_CHECKING([for four-argument statfs (AIX-3.2.5, SVR3)]) +AC_CACHE_VAL(fu_cv_sys_stat_statfs4, +[AC_TRY_RUN([#include +#include +int main () +{ +struct statfs fsd; +return (statfs (".", &fsd, sizeof fsd, 0)); +}], +fu_cv_sys_stat_statfs4=yes, +fu_cv_sys_stat_statfs4=no, +fu_cv_sys_stat_statfs4=no)]) +AC_MSG_RESULT($fu_cv_sys_stat_statfs4) +if test $fu_cv_sys_stat_statfs4 = yes; then +space=yes +AC_DEFINE(STAT_STATFS4, 1, + [Define if statfs takes 4 args. [SVR3, Dynix, Irix, Dolphin]]) +fi +fi + +if test $space = no; then +# 4.4BSD and NetBSD +AC_MSG_CHECKING([for two-argument statfs with statfs.fsize dnl +member (4.4BSD and NetBSD)]) +AC_CACHE_VAL(fu_cv_sys_stat_statfs2_fsize, +[AC_TRY_RUN([#include +#ifdef HAVE_SYS_PARAM_H +#include +#endif +#ifdef HAVE_SYS_MOUNT_H +#include +#endif +int main () +{ +struct statfs fsd; +fsd.f_fsize = 0; +return (statfs (".", &fsd)); +}], +fu_cv_sys_stat_statfs2_fsize=yes, +fu_cv_sys_stat_statfs2_fsize=no, +fu_cv_sys_stat_statfs2_fsize=no)]) +AC_MSG_RESULT($fu_cv_sys_stat_statfs2_fsize) +if test $fu_cv_sys_stat_statfs2_fsize = yes; then +space=yes +AC_DEFINE(STAT_STATFS2_FSIZE, 1, + [Define if statfs takes 2 args and struct statfs has a field named f_fsize. [4.4BSD, NetBSD]]) +fi +fi + +if test $space = no; then +# Ultrix +AC_MSG_CHECKING([for two-argument statfs with struct fs_data (Ultrix)]) +AC_CACHE_VAL(fu_cv_sys_stat_fs_data, +[AC_TRY_RUN([#include +#ifdef HAVE_SYS_PARAM_H +#include +#endif +#ifdef HAVE_SYS_MOUNT_H +#include +#endif +#ifdef HAVE_SYS_FS_TYPES_H +#include +#endif +int main () +{ +struct fs_data fsd; +/* Ultrix's statfs returns 1 for success, +0 for not mounted, -1 for failure. */ +return (statfs (".", &fsd) != 1); +}], +fu_cv_sys_stat_fs_data=yes, +fu_cv_sys_stat_fs_data=no, +fu_cv_sys_stat_fs_data=no)]) +AC_MSG_RESULT($fu_cv_sys_stat_fs_data) +if test $fu_cv_sys_stat_fs_data = yes; then +space=yes +AC_DEFINE(STAT_STATFS2_FS_DATA, 1, + [Define if statfs takes 2 args and the second argument has type struct fs_data. [Ultrix]]) +fi +fi + +if test $space = no; then +# SVR2 +AC_TRY_CPP([#include ], +AC_DEFINE(STAT_READ_FILSYS, 1, + [Define if there is no specific function for reading filesystems usage information and you have the header file. [SVR2]]) +space=yes) +fi + +if test -n "$list_mounted_fs" && test $space != no; then +DF_PROG="df" +# AC_LIBOBJ(fsusage) +# AC_LIBOBJ(mountlist) +fi + +# Check for SunOS statfs brokenness wrt partitions 2GB and larger. +# If exists and struct statfs has a member named f_spare, +# enable the work-around code in fsusage.c. +AC_MSG_CHECKING([for statfs that truncates block counts]) +AC_CACHE_VAL(fu_cv_sys_truncating_statfs, +[AC_TRY_COMPILE([ +#if !defined(sun) && !defined(__sun) +choke -- this is a workaround for a Sun-specific problem +#endif +#include +#include ], +[struct statfs t; long c = *(t.f_spare);], +fu_cv_sys_truncating_statfs=yes, +fu_cv_sys_truncating_statfs=no, +)]) +if test $fu_cv_sys_truncating_statfs = yes; then +AC_DEFINE(STATFS_TRUNCATES_BLOCK_COUNTS, 1, + [Define if the block counts reported by statfs may be truncated to 2GB and the correct values may be stored in the f_spare array. [SunOS 4.1.2, 4.1.3, and 4.1.3_U1 are reported to have this problem. SunOS 4.1.1 seems not to be affected.]]) +fi +AC_MSG_RESULT($fu_cv_sys_truncating_statfs) + +AC_CHECKING(for AFS) +test -d /afs && AC_DEFINE(AFS, 1, [Define if you have the Andrew File System.]) +]) + + +m4_include([libgtop-sysdeps.m4]) diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..25b724d --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,1513 @@ +# generated automatically by aclocal 1.15 -*- Autoconf -*- + +# Copyright (C) 1996-2014 Free Software Foundation, Inc. + +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) + +# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +# serial 11 (pkg-config-0.29.1) + +dnl Copyright © 2004 Scott James Remnant . +dnl Copyright © 2012-2015 Dan Nicholson +dnl +dnl This program is free software; you can redistribute it and/or modify +dnl it under the terms of the GNU General Public License as published by +dnl the Free Software Foundation; either version 2 of the License, or +dnl (at your option) any later version. +dnl +dnl This program is distributed in the hope that it will be useful, but +dnl WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl General Public License for more details. +dnl +dnl You should have received a copy of the GNU General Public License +dnl along with this program; if not, write to the Free Software +dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +dnl 02111-1307, USA. +dnl +dnl As a special exception to the GNU General Public License, if you +dnl distribute this file as part of a program that contains a +dnl configuration script generated by Autoconf, you may include it under +dnl the same distribution terms that you use for the rest of that +dnl program. + +dnl PKG_PREREQ(MIN-VERSION) +dnl ----------------------- +dnl Since: 0.29 +dnl +dnl Verify that the version of the pkg-config macros are at least +dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's +dnl installed version of pkg-config, this checks the developer's version +dnl of pkg.m4 when generating configure. +dnl +dnl To ensure that this macro is defined, also add: +dnl m4_ifndef([PKG_PREREQ], +dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])]) +dnl +dnl See the "Since" comment for each macro you use to see what version +dnl of the macros you require. +m4_defun([PKG_PREREQ], +[m4_define([PKG_MACROS_VERSION], [0.29.1]) +m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, + [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) +])dnl PKG_PREREQ + +dnl PKG_PROG_PKG_CONFIG([MIN-VERSION]) +dnl ---------------------------------- +dnl Since: 0.16 +dnl +dnl Search for the pkg-config tool and set the PKG_CONFIG variable to +dnl first found in the path. Checks that the version of pkg-config found +dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is +dnl used since that's the first version where most current features of +dnl pkg-config existed. +AC_DEFUN([PKG_PROG_PKG_CONFIG], +[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) +m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) +AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) +AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) +AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=m4_default([$1], [0.9.0]) + AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + PKG_CONFIG="" + fi +fi[]dnl +])dnl PKG_PROG_PKG_CONFIG + +dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +dnl ------------------------------------------------------------------- +dnl Since: 0.18 +dnl +dnl Check to see whether a particular set of modules exists. Similar to +dnl PKG_CHECK_MODULES(), but does not set variables or print errors. +dnl +dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +dnl only at the first occurence in configure.ac, so if the first place +dnl it's called might be skipped (such as if it is within an "if", you +dnl have to call PKG_CHECK_EXISTS manually +AC_DEFUN([PKG_CHECK_EXISTS], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +if test -n "$PKG_CONFIG" && \ + AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then + m4_default([$2], [:]) +m4_ifvaln([$3], [else + $3])dnl +fi]) + +dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +dnl --------------------------------------------- +dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting +dnl pkg_failed based on the result. +m4_define([_PKG_CONFIG], +[if test -n "$$1"; then + pkg_cv_[]$1="$$1" + elif test -n "$PKG_CONFIG"; then + PKG_CHECK_EXISTS([$3], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes ], + [pkg_failed=yes]) + else + pkg_failed=untried +fi[]dnl +])dnl _PKG_CONFIG + +dnl _PKG_SHORT_ERRORS_SUPPORTED +dnl --------------------------- +dnl Internal check to see if pkg-config supports short errors. +AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi[]dnl +])dnl _PKG_SHORT_ERRORS_SUPPORTED + + +dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +dnl [ACTION-IF-NOT-FOUND]) +dnl -------------------------------------------------------------- +dnl Since: 0.4.0 +dnl +dnl Note that if there is a possibility the first call to +dnl PKG_CHECK_MODULES might not happen, you should be sure to include an +dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac +AC_DEFUN([PKG_CHECK_MODULES], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl +AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl + +pkg_failed=no +AC_MSG_CHECKING([for $1]) + +_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) +_PKG_CONFIG([$1][_LIBS], [libs], [$2]) + +m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS +and $1[]_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details.]) + +if test $pkg_failed = yes; then + AC_MSG_RESULT([no]) + _PKG_SHORT_ERRORS_SUPPORTED + if test $_pkg_short_errors_supported = yes; then + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` + else + $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + + m4_default([$4], [AC_MSG_ERROR( +[Package requirements ($2) were not met: + +$$1_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +_PKG_TEXT])[]dnl + ]) +elif test $pkg_failed = untried; then + AC_MSG_RESULT([no]) + m4_default([$4], [AC_MSG_FAILURE( +[The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +_PKG_TEXT + +To get pkg-config, see .])[]dnl + ]) +else + $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS + $1[]_LIBS=$pkg_cv_[]$1[]_LIBS + AC_MSG_RESULT([yes]) + $3 +fi[]dnl +])dnl PKG_CHECK_MODULES + + +dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +dnl [ACTION-IF-NOT-FOUND]) +dnl --------------------------------------------------------------------- +dnl Since: 0.29 +dnl +dnl Checks for existence of MODULES and gathers its build flags with +dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags +dnl and VARIABLE-PREFIX_LIBS from --libs. +dnl +dnl Note that if there is a possibility the first call to +dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to +dnl include an explicit call to PKG_PROG_PKG_CONFIG in your +dnl configure.ac. +AC_DEFUN([PKG_CHECK_MODULES_STATIC], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +_save_PKG_CONFIG=$PKG_CONFIG +PKG_CONFIG="$PKG_CONFIG --static" +PKG_CHECK_MODULES($@) +PKG_CONFIG=$_save_PKG_CONFIG[]dnl +])dnl PKG_CHECK_MODULES_STATIC + + +dnl PKG_INSTALLDIR([DIRECTORY]) +dnl ------------------------- +dnl Since: 0.27 +dnl +dnl Substitutes the variable pkgconfigdir as the location where a module +dnl should install pkg-config .pc files. By default the directory is +dnl $libdir/pkgconfig, but the default can be changed by passing +dnl DIRECTORY. The user can override through the --with-pkgconfigdir +dnl parameter. +AC_DEFUN([PKG_INSTALLDIR], +[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) +m4_pushdef([pkg_description], + [pkg-config installation directory @<:@]pkg_default[@:>@]) +AC_ARG_WITH([pkgconfigdir], + [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],, + [with_pkgconfigdir=]pkg_default) +AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) +m4_popdef([pkg_default]) +m4_popdef([pkg_description]) +])dnl PKG_INSTALLDIR + + +dnl PKG_NOARCH_INSTALLDIR([DIRECTORY]) +dnl -------------------------------- +dnl Since: 0.27 +dnl +dnl Substitutes the variable noarch_pkgconfigdir as the location where a +dnl module should install arch-independent pkg-config .pc files. By +dnl default the directory is $datadir/pkgconfig, but the default can be +dnl changed by passing DIRECTORY. The user can override through the +dnl --with-noarch-pkgconfigdir parameter. +AC_DEFUN([PKG_NOARCH_INSTALLDIR], +[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) +m4_pushdef([pkg_description], + [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@]) +AC_ARG_WITH([noarch-pkgconfigdir], + [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],, + [with_noarch_pkgconfigdir=]pkg_default) +AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) +m4_popdef([pkg_default]) +m4_popdef([pkg_description]) +])dnl PKG_NOARCH_INSTALLDIR + + +dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, +dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +dnl ------------------------------------------- +dnl Since: 0.28 +dnl +dnl Retrieves the value of the pkg-config variable for the given module. +AC_DEFUN([PKG_CHECK_VAR], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl + +_PKG_CONFIG([$1], [variable="][$3]["], [$2]) +AS_VAR_COPY([$1], [pkg_cv_][$1]) + +AS_VAR_IF([$1], [""], [$5], [$4])dnl +])dnl PKG_CHECK_VAR + +dnl PKG_WITH_MODULES(VARIABLE-PREFIX, MODULES, +dnl [ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND], +dnl [DESCRIPTION], [DEFAULT]) +dnl ------------------------------------------ +dnl +dnl Prepare a "--with-" configure option using the lowercase +dnl [VARIABLE-PREFIX] name, merging the behaviour of AC_ARG_WITH and +dnl PKG_CHECK_MODULES in a single macro. +AC_DEFUN([PKG_WITH_MODULES], +[ +m4_pushdef([with_arg], m4_tolower([$1])) + +m4_pushdef([description], + [m4_default([$5], [build with ]with_arg[ support])]) + +m4_pushdef([def_arg], [m4_default([$6], [auto])]) +m4_pushdef([def_action_if_found], [AS_TR_SH([with_]with_arg)=yes]) +m4_pushdef([def_action_if_not_found], [AS_TR_SH([with_]with_arg)=no]) + +m4_case(def_arg, + [yes],[m4_pushdef([with_without], [--without-]with_arg)], + [m4_pushdef([with_without],[--with-]with_arg)]) + +AC_ARG_WITH(with_arg, + AS_HELP_STRING(with_without, description[ @<:@default=]def_arg[@:>@]),, + [AS_TR_SH([with_]with_arg)=def_arg]) + +AS_CASE([$AS_TR_SH([with_]with_arg)], + [yes],[PKG_CHECK_MODULES([$1],[$2],$3,$4)], + [auto],[PKG_CHECK_MODULES([$1],[$2], + [m4_n([def_action_if_found]) $3], + [m4_n([def_action_if_not_found]) $4])]) + +m4_popdef([with_arg]) +m4_popdef([description]) +m4_popdef([def_arg]) + +])dnl PKG_WITH_MODULES + +dnl PKG_HAVE_WITH_MODULES(VARIABLE-PREFIX, MODULES, +dnl [DESCRIPTION], [DEFAULT]) +dnl ----------------------------------------------- +dnl +dnl Convenience macro to trigger AM_CONDITIONAL after PKG_WITH_MODULES +dnl check._[VARIABLE-PREFIX] is exported as make variable. +AC_DEFUN([PKG_HAVE_WITH_MODULES], +[ +PKG_WITH_MODULES([$1],[$2],,,[$3],[$4]) + +AM_CONDITIONAL([HAVE_][$1], + [test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"]) +])dnl PKG_HAVE_WITH_MODULES + +dnl PKG_HAVE_DEFINE_WITH_MODULES(VARIABLE-PREFIX, MODULES, +dnl [DESCRIPTION], [DEFAULT]) +dnl ------------------------------------------------------ +dnl +dnl Convenience macro to run AM_CONDITIONAL and AC_DEFINE after +dnl PKG_WITH_MODULES check. HAVE_[VARIABLE-PREFIX] is exported as make +dnl and preprocessor variable. +AC_DEFUN([PKG_HAVE_DEFINE_WITH_MODULES], +[ +PKG_HAVE_WITH_MODULES([$1],[$2],[$3],[$4]) + +AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"], + [AC_DEFINE([HAVE_][$1], 1, [Enable ]m4_tolower([$1])[ support])]) +])dnl PKG_HAVE_DEFINE_WITH_MODULES + +# Copyright (C) 2002-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.15' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.15], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.15])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is '.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each '.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. +m4_define([AC_PROG_CC], +m4_defn([AC_PROG_CC]) +[_AM_PROG_CC_C_O +]) + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi +dnl The trailing newline in this macro's definition is deliberate, for +dnl backward compatibility and to allow trailing 'dnl'-style comments +dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. +]) + +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) + +# Copyright (C) 2003-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_CC_C_O +# --------------- +# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC +# to automatically call this. +AC_DEFUN([_AM_PROG_CC_C_O], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +AC_LANG_PUSH([C])dnl +AC_CACHE_CHECK( + [whether $CC understands -c and -o together], + [am_cv_prog_cc_c_o], + [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i]) +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +AC_LANG_POP([C])]) + +# For backward compatibility. +AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_RUN_LOG(COMMAND) +# ------------------- +# Run COMMAND, save the exit status in ac_status, and log it. +# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) +AC_DEFUN([AM_RUN_LOG], +[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD + ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + (exit $ac_status); }]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) + +# Copyright (C) 2009-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor 'install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in "make install-strip", and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004-2014 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +# +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' + +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + + [m4_case([$1], + [ustar], + [# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi + AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi], + + [pax], + [], + + [m4_fatal([Unknown tar format])]) + + AC_MSG_CHECKING([how to create a $1 tar archive]) + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_$1-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi + done + rm -rf conftest.dir + + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([m4/gettext.m4]) +m4_include([m4/gtk-doc.m4]) +m4_include([m4/iconv.m4]) +m4_include([m4/intlmacosx.m4]) +m4_include([m4/introspection.m4]) +m4_include([m4/lib-ld.m4]) +m4_include([m4/lib-link.m4]) +m4_include([m4/lib-prefix.m4]) +m4_include([m4/libtool.m4]) +m4_include([m4/ltoptions.m4]) +m4_include([m4/ltsugar.m4]) +m4_include([m4/ltversion.m4]) +m4_include([m4/lt~obsolete.m4]) +m4_include([m4/nls.m4]) +m4_include([m4/po.m4]) +m4_include([m4/progtest.m4]) +m4_include([acinclude.m4]) diff --git a/autogen.sh b/autogen.sh new file mode 100755 index 0000000..7257368 --- /dev/null +++ b/autogen.sh @@ -0,0 +1,20 @@ +#!/bin/sh +# Run this to generate all the initial makefiles, etc. + +srcdir=`dirname $0` +test -z "$srcdir" && srcdir=. + +(test -f $srcdir/configure.ac \ + && test -f $srcdir/copyright.txt \ + && test -d $srcdir/sysdeps) || { + echo -n "**Error**: Directory "\`$srcdir\'" does not look like the" + echo " top-level gnome directory" + exit 1 +} + +which gnome-autogen.sh || { + echo "You need to install gnome-common from the GNOME CVS" + exit 1 +} +REQUIRED_AUTOMAKE_VERSION=1.9 +. gnome-autogen.sh diff --git a/compile b/compile new file mode 100755 index 0000000..a85b723 --- /dev/null +++ b/compile @@ -0,0 +1,347 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-10-14.11; # UTC + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/config.guess b/config.guess new file mode 100755 index 0000000..2e9ad7f --- /dev/null +++ b/config.guess @@ -0,0 +1,1462 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright 1992-2016 Free Software Foundation, Inc. + +timestamp='2016-10-02' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). +# +# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess +# +# Please send patches to . + + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright 1992-2016 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +case "${UNAME_SYSTEM}" in +Linux|GNU|GNU/*) + # If the system lacks a compiler, then just pick glibc. + # We could probably try harder. + LIBC=gnu + + eval $set_cc_for_build + cat <<-EOF > $dummy.c + #include + #if defined(__UCLIBC__) + LIBC=uclibc + #elif defined(__dietlibc__) + LIBC=dietlibc + #else + LIBC=gnu + #endif + EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` + ;; +esac + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ + /sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || \ + echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + earmv*) + arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'` + endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'` + machine=${arch}${endian}-unknown + ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently (or will in the future) and ABI. + case "${UNAME_MACHINE_ARCH}" in + earm*) + os=netbsdelf + ;; + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # Determine ABI tags. + case "${UNAME_MACHINE_ARCH}" in + earm*) + expr='s/^earmv[0-9]/-eabi/;s/eb$//' + abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"` + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}${abi}" + exit ;; + *:Bitrig:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:LibertyBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-libertybsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:Sortix:*:*) + echo ${UNAME_MACHINE}-unknown-sortix + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE=alpha ;; + "EV4.5 (21064)") + UNAME_MACHINE=alpha ;; + "LCA4 (21066/21068)") + UNAME_MACHINE=alpha ;; + "EV5 (21164)") + UNAME_MACHINE=alphaev5 ;; + "EV5.6 (21164A)") + UNAME_MACHINE=alphaev56 ;; + "EV5.6 (21164PC)") + UNAME_MACHINE=alphapca56 ;; + "EV5.7 (21164PC)") + UNAME_MACHINE=alphapca57 ;; + "EV6 (21264)") + UNAME_MACHINE=alphaev6 ;; + "EV6.7 (21264A)") + UNAME_MACHINE=alphaev67 ;; + "EV6.8CB (21264C)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8AL (21264B)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8CX (21264D)") + UNAME_MACHINE=alphaev68 ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE=alphaev69 ;; + "EV7 (21364)") + UNAME_MACHINE=alphaev7 ;; + "EV7.9 (21364A)") + UNAME_MACHINE=alphaev79 ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm*:riscos:*:*|arm*:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH=i386 + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH=x86_64 + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/lslpp ] ; then + IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | + awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 + 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH=hppa2.0n ;; + 64) HP_ARCH=hppa2.0w ;; + '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = hppa2.0w ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH=hppa2.0w + else + HP_ARCH=hppa64 + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`/usr/bin/uname -p` + case ${UNAME_PROCESSOR} in + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW64*:*) + echo ${UNAME_MACHINE}-pc-mingw64 + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + *:MSYS*:*) + echo ${UNAME_MACHINE}-pc-msys + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + aarch64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC=gnulibc1 ; fi + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + arc:Linux:*:* | arceb:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi + else + echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + cris:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-${LIBC} + exit ;; + crisv32:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-${LIBC} + exit ;; + e2k:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + frv:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + hexagon:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + i*86:Linux:*:*) + echo ${UNAME_MACHINE}-pc-linux-${LIBC} + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + k1om:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } + ;; + mips64el:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + openrisc*:Linux:*:*) + echo or1k-unknown-linux-${LIBC} + exit ;; + or32:Linux:*:* | or1k*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-${LIBC} + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-${LIBC} + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; + PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; + *) echo hppa-unknown-linux-${LIBC} ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-${LIBC} + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-${LIBC} + exit ;; + ppc64le:Linux:*:*) + echo powerpc64le-unknown-linux-${LIBC} + exit ;; + ppcle:Linux:*:*) + echo powerpcle-unknown-linux-${LIBC} + exit ;; + riscv32:Linux:*:* | riscv64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux-${LIBC} + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + tile*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-${LIBC} + exit ;; + x86_64:Linux:*:*) + echo ${UNAME_MACHINE}-pc-linux-${LIBC} + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configure will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + x86_64:Haiku:*:*) + echo x86_64-unknown-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + SX-ACE:SUPER-UX:*:*) + echo sxace-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + eval $set_cc_for_build + if test "$UNAME_PROCESSOR" = unknown ; then + UNAME_PROCESSOR=powerpc + fi + if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + case $UNAME_PROCESSOR in + i386) UNAME_PROCESSOR=x86_64 ;; + powerpc) UNAME_PROCESSOR=powerpc64 ;; + esac + fi + fi + elif test "$UNAME_PROCESSOR" = i386 ; then + # Avoid executing cc on OS X 10.9, as it ships with a stub + # that puts up a graphical alert prompting to install + # developer tools. Any system running Mac OS X 10.7 or + # later (Darwin 11 and later) is required to have a 64-bit + # processor. This is not true of the ARM version of Darwin + # that Apple uses in portable devices. + UNAME_PROCESSOR=x86_64 + fi + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = x86; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-?:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk${UNAME_RELEASE} + exit ;; + NSE-*:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = 386; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'` + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo ${UNAME_MACHINE}-unknown-esx + exit ;; + amd64:Isilon\ OneFS:*:*) + echo x86_64-unknown-onefs + exit ;; +esac + +cat >&2 </dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/config.h.in b/config.h.in new file mode 100644 index 0000000..b20c7a6 --- /dev/null +++ b/config.h.in @@ -0,0 +1,453 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Define if you have the Andrew File System. */ +#undef AFS + +/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP + systems. This function is required for `alloca.c' support on those systems. + */ +#undef CRAY_STACKSEG_END + +/* Define to 1 if using `alloca.c'. */ +#undef C_ALLOCA + +/* Define to 1 if translation of program messages to the user's native + language is requested. */ +#undef ENABLE_NLS + +/* Define to the gettext package used by the library */ +#undef GETTEXT_PACKAGE + +/* Same as LINUX_VERSION_CODE either from or from the + running kernel (if there are no configured kernel sources). */ +#undef GLIBTOP_LINUX_VERSION_CODE + +/* Solaris release code (eg. 20501 for Solaris 2.5.1). */ +#undef GLIBTOP_SOLARIS_RELEASE + +/* Define to 1 if you have `alloca', as a function or macro. */ +#undef HAVE_ALLOCA + +/* Define to 1 if you have and it should be used (not on Ultrix). + */ +#undef HAVE_ALLOCA_H + +/* Define to 1 if you have the `bcopy' function. */ +#undef HAVE_BCOPY + +/* Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the + CoreFoundation framework. */ +#undef HAVE_CFLOCALECOPYCURRENT + +/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in + the CoreFoundation framework. */ +#undef HAVE_CFPREFERENCESCOPYAPPVALUE + +/* Define if the GNU dcgettext() function is already present or preinstalled. + */ +#undef HAVE_DCGETTEXT + +/* Define to 1 if you have the `dlerror' function. */ +#undef HAVE_DLERROR + +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + +/* Define to 1 if you have the `dlopen' function. */ +#undef HAVE_DLOPEN + +/* Define to 1 if you have the `endgrent' function. */ +#undef HAVE_ENDGRENT + +/* Define to 1 if you have the `endpwent' function. */ +#undef HAVE_ENDPWENT + +/* Define to 1 if you have the `fchdir' function. */ +#undef HAVE_FCHDIR + +/* Define to 1 if you have the header file. */ +#undef HAVE_FCNTL_H + +/* Define to 1 if you have the `ftime' function. */ +#undef HAVE_FTIME + +/* Define to 1 if you have the `ftruncate' function. */ +#undef HAVE_FTRUNCATE + +/* Define to 1 if you have the `getcwd' function. */ +#undef HAVE_GETCWD + +/* Define to 1 if you have the `getloadavg' function. */ +#undef HAVE_GETLOADAVG + +/* Define to 1 if you have the `getmntent' function. */ +#undef HAVE_GETMNTENT + +/* Define to 1 if you have the `getmntinfo' function. */ +#undef HAVE_GETMNTINFO + +/* Define to 1 if you have the `getpagesize' function. */ +#undef HAVE_GETPAGESIZE + +/* Define if the GNU gettext() function is already present or preinstalled. */ +#undef HAVE_GETTEXT + +/* Define to 1 if you have the `gettimeofday' function. */ +#undef HAVE_GETTIMEOFDAY + +/* Define to 1 if you have the `getwd' function. */ +#undef HAVE_GETWD + +/* Define if I4B is available */ +#undef HAVE_I4B + +/* Define if I4B accounting is supported */ +#undef HAVE_I4B_ACCT + +/* Define if you have the iconv() function and it works. */ +#undef HAVE_ICONV + +/* defined if you have ifaddrs.h */ +#undef HAVE_IFADDRS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the `isascii' function. */ +#undef HAVE_ISASCII + +/* defined if you have linux/isdn.h */ +#undef HAVE_ISDN_H + +/* Define to 1 if you have the `lchown' function. */ +#undef HAVE_LCHOWN + +/* Define to 1 if you have the `kstat' library (-lkstat). */ +#undef HAVE_LIBKSTAT + +/* Define to 1 if you have the `mach' library (-lmach). */ +#undef HAVE_LIBMACH + +/* Define to 1 if you have the `nsl' library (-lnsl). */ +#undef HAVE_LIBNSL + +/* Define to 1 if you have the `resolv' library (-lresolv). */ +#undef HAVE_LIBRESOLV + +/* Define to 1 if you have the `socket' library (-lsocket). */ +#undef HAVE_LIBSOCKET + +/* Define to 1 if you have the header file. */ +#undef HAVE_LINUX_VERSION_H + +/* Define to 1 if you have the `listmntent' function. */ +#undef HAVE_LISTMNTENT + +/* Define to 1 if you have the `memcpy' function. */ +#undef HAVE_MEMCPY + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the `mkfifo' function. */ +#undef HAVE_MKFIFO + +/* Define to 1 if you have a working `mmap' system call. */ +#undef HAVE_MMAP + +/* Define to 1 if you have the header file. */ +#undef HAVE_MNTENT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_MNTTAB_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_NET_IF_VAR_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_PROCFS_H + +/* Define to 1 if you have the `putenv' function. */ +#undef HAVE_PUTENV + +/* Define if struct sockaddr_un has a sun_len member */ +#undef HAVE_SOCKADDR_SUN_LEN + +/* Define if BSD sockets are supported */ +#undef HAVE_SOCKETS + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the `strchr' function. */ +#undef HAVE_STRCHR + +/* Define to 1 if you have the `strdup' function. */ +#undef HAVE_STRDUP + +/* Define to 1 if you have the `strerror' function. */ +#undef HAVE_STRERROR + +/* Define to 1 if you have the `strftime' function. */ +#undef HAVE_STRFTIME + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the `strrchr' function. */ +#undef HAVE_STRRCHR + +/* Define to 1 if you have the `strtoul' function. */ +#undef HAVE_STRTOUL + +/* Define to 1 if `st_rdev' is a member of `struct stat'. */ +#undef HAVE_STRUCT_STAT_ST_RDEV + +/* Define to 1 if your `struct stat' has `st_rdev'. Deprecated, use + `HAVE_STRUCT_STAT_ST_RDEV' instead. */ +#undef HAVE_ST_RDEV + +/* Define to 1 if you have the `swapctl' function. */ +#undef HAVE_SWAPCTL + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_BITYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_FILSYS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_FSTYP_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_FS_S5PARAM_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_FS_TYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_MOUNT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_PARAM_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_PROCFS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STATFS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STATVFS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_VFS_H + +/* Define to 1 if you have the `uname' function. */ +#undef HAVE_UNAME + +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Define to 1 if you have the 'vmgetinfo' function in libperfstat */ +#undef HAVE_VMGETINFO + +/* Define to 1 if you have the `vprintf' function. */ +#undef HAVE_VPRINTF + +/* Define if Xauth is supported */ +#undef HAVE_XAUTH + +/* Define to disable debugging */ +#undef LIBGTOP_ENABLE_DEBUG + +/* Define to enable fatal warnings */ +#undef LIBGTOP_FATAL_WARNINGS + +/* Define if libgtop server is required */ +#undef LIBGTOP_NEED_SERVER + +/* The path to the libgtop server */ +#undef LIBGTOP_SERVER + +/* The libgtop server version */ +#undef LIBGTOP_SERVER_VERSION + +/* The libgtop version number */ +#undef LIBGTOP_VERSION + +/* The libgtop version number as an integer */ +#undef LIBGTOP_VERSION_CODE + +/* Define to the sub-directory where libtool stores uninstalled libraries. */ +#undef LT_OBJDIR + +/* Define if there is no specific function for reading the list of mounted + filesystems. fread will be used to read /etc/mnttab. [SVR2] */ +#undef MOUNTED_FREAD + +/* Define if (like SVR2) there is no specific function for reading the list of + mounted filesystems, and your system has these header files: + and . [SVR3] */ +#undef MOUNTED_FREAD_FSTYP + +/* Define if there is a function named getfsstat for reading the list of + mounted filesystems. [DEC Alpha running OSF/1] */ +#undef MOUNTED_GETFSSTAT + +/* Define if there is a function named getmnt for reading the list of mounted + filesystems. [Ultrix] */ +#undef MOUNTED_GETMNT + +/* Define if there is a function named getmntent for reading the list of + mounted filesystems, and that function takes a single argument. [4.3BSD, + SunOS, HP-UX, Dynix, Irix] */ +#undef MOUNTED_GETMNTENT1 + +/* Define if there is a function named getmntent for reading the list of + mounted filesystems, and that function takes two arguments. [SVR4] */ +#undef MOUNTED_GETMNTENT2 + +/* Define if there is a function named getmntinfo for reading the list of + mounted filesystems. [4.4BSD] */ +#undef MOUNTED_GETMNTINFO + +/* Define if there is a function named listmntent that can be used to list all + mounted filesystems. [UNICOS] */ +#undef MOUNTED_LISTMNTENT + +/* Define if there is a function named mntctl that can be used to read the + list of mounted filesystems, and there is a system header file that + declares `struct vmount.' [AIX] */ +#undef MOUNTED_VMOUNT + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Define as the return type of signal handlers (`int' or `void'). */ +#undef RETSIGTYPE + +/* If using the C implementation of alloca, define if you know the + direction of stack growth for your system; otherwise it will be + automatically deduced at runtime. + STACK_DIRECTION > 0 => grows toward higher addresses + STACK_DIRECTION < 0 => grows toward lower addresses + STACK_DIRECTION = 0 => direction of growth unknown */ +#undef STACK_DIRECTION + +/* Define if the block counts reported by statfs may be truncated to 2GB and + the correct values may be stored in the f_spare array. [SunOS 4.1.2, 4.1.3, + and 4.1.3_U1 are reported to have this problem. SunOS 4.1.1 seems not to be + affected.] */ +#undef STATFS_TRUNCATES_BLOCK_COUNTS + +/* Define if there is no specific function for reading filesystems usage + information and you have the header file. [SVR2] */ +#undef STAT_READ_FILSYS + +/* Define if statfs takes 2 args and struct statfs has a field named f_bsize. + [4.3BSD, SunOS 4, HP-UX, AIX PS/2] */ +#undef STAT_STATFS2_BSIZE + +/* Define if statfs takes 2 args and struct statfs has a field named f_fsize. + [4.4BSD, NetBSD] */ +#undef STAT_STATFS2_FSIZE + +/* Define if statfs takes 2 args and the second argument has type struct + fs_data. [Ultrix] */ +#undef STAT_STATFS2_FS_DATA + +/* Define if statfs takes 3 args. [DEC Alpha running OSF/1] */ +#undef STAT_STATFS3_OSF1 + +/* Define if statfs takes 4 args. [SVR3, Dynix, Irix, Dolphin] */ +#undef STAT_STATFS4 + +/* Define if there is a function named statvfs. [SVR4] */ +#undef STAT_STATVFS + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define to 1 if we need to define KERNEL to get 'struct msginfo' */ +#undef STRUCT_MSGINFO_NEEDS_KERNEL + +/* Define to 1 if we need to define _KERNEL to get 'struct msginfo' */ +#undef STRUCT_MSGINFO_NEEDS__KERNEL + +/* Define to 1 if you can safely include both and . */ +#undef TIME_WITH_SYS_TIME + +/* Define to 1 if your declares `struct tm'. */ +#undef TM_IN_SYS_TIME + +/* Version number of package */ +#undef VERSION + +/* Define to 1 if the X Window System is missing or not being used. */ +#undef X_DISPLAY_MISSING + +/* Enable GNU extensions on systems that have them. */ +#ifndef _GNU_SOURCE +# define _GNU_SOURCE +#endif + +/* Note that we are building libgtop rather than using it */ +#undef _IN_LIBGTOP + +/* Define to empty if `const' does not conform to ANSI C. */ +#undef const + +/* Define to `int' if doesn't define. */ +#undef gid_t + +/* Define to `__inline__' or `__inline' if that's what the C compiler + calls it, or to nothing if 'inline' is not supported under any name. */ +#ifndef __cplusplus +#undef inline +#endif + +/* Define to `long int' if does not define. */ +#undef off_t + +/* Define to `int' if does not define. */ +#undef pid_t + +/* Define to `unsigned int' if does not define. */ +#undef size_t + +/* Define to `int' if does not define. */ +#undef ssize_t + +/* Define to `int' if doesn't define. */ +#undef uid_t diff --git a/config.rpath b/config.rpath new file mode 100755 index 0000000..b625621 --- /dev/null +++ b/config.rpath @@ -0,0 +1,684 @@ +#! /bin/sh +# Output a system dependent set of variables, describing how to set the +# run time search path of shared libraries in an executable. +# +# Copyright 1996-2014 Free Software Foundation, Inc. +# Taken from GNU libtool, 2001 +# Originally by Gordon Matzigkeit , 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. +# +# The first argument passed to this file is the canonical host specification, +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld +# should be set by the caller. +# +# The set of defined variables is at the end of this script. + +# Known limitations: +# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer +# than 256 bytes, otherwise the compiler driver will dump core. The only +# known workaround is to choose shorter directory names for the build +# directory and/or the installation directory. + +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +shrext=.so + +host="$1" +host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + +# Code taken from libtool.m4's _LT_CC_BASENAME. + +for cc_temp in $CC""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` + +# Code taken from libtool.m4's _LT_COMPILER_PIC. + +wl= +if test "$GCC" = yes; then + wl='-Wl,' +else + case "$host_os" in + aix*) + wl='-Wl,' + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) + ;; + hpux9* | hpux10* | hpux11*) + wl='-Wl,' + ;; + irix5* | irix6* | nonstopux*) + wl='-Wl,' + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + ecc*) + wl='-Wl,' + ;; + icc* | ifort*) + wl='-Wl,' + ;; + lf95*) + wl='-Wl,' + ;; + nagfor*) + wl='-Wl,-Wl,,' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + wl='-Wl,' + ;; + ccc*) + wl='-Wl,' + ;; + xl* | bgxl* | bgf* | mpixl*) + wl='-Wl,' + ;; + como) + wl='-lopt=' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ F* | *Sun*Fortran*) + wl= + ;; + *Sun\ C*) + wl='-Wl,' + ;; + esac + ;; + esac + ;; + newsos6) + ;; + *nto* | *qnx*) + ;; + osf3* | osf4* | osf5*) + wl='-Wl,' + ;; + rdos*) + ;; + solaris*) + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + wl='-Qoption ld ' + ;; + *) + wl='-Wl,' + ;; + esac + ;; + sunos4*) + wl='-Qoption ld ' + ;; + sysv4 | sysv4.2uw2* | sysv4.3*) + wl='-Wl,' + ;; + sysv4*MP*) + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + wl='-Wl,' + ;; + unicos*) + wl='-Wl,' + ;; + uts4*) + ;; + esac +fi + +# Code taken from libtool.m4's _LT_LINKER_SHLIBS. + +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no + +case "$host_os" in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + # Unlike libtool, we use -rpath here, not --rpath, since the documented + # option of GNU ld is called -rpath, not --rpath. + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + case "$host_os" in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + fi + ;; + amigaos*) + case "$host_cpu" in + powerpc) + ;; + m68k) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + cygwin* | mingw* | pw32* | cegcc*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + haiku*) + ;; + interix[3-9]*) + hardcode_direct=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + netbsd*) + ;; + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + else + ld_shlibs=no + fi + ;; + esac + ;; + sunos4*) + hardcode_direct=yes + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + esac + if test "$ld_shlibs" = no; then + hardcode_libdir_flag_spec= + fi +else + case "$host_os" in + aix3*) + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + else + aix_use_runtimelinking=no + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + fi + hardcode_direct=yes + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + fi + # Begin _LT_AC_SYS_LIBPATH_AIX. + echo 'int main () { return 0; }' > conftest.c + ${CC} ${LDFLAGS} conftest.c -o conftest + aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + fi + if test -z "$aix_libpath"; then + aix_libpath="/usr/lib:/lib" + fi + rm -f conftest.c conftest + # End _LT_AC_SYS_LIBPATH_AIX. + if test "$aix_use_runtimelinking" = yes; then + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + else + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + fi + fi + ;; + amigaos*) + case "$host_cpu" in + powerpc) + ;; + m68k) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + bsdi[45]*) + ;; + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + libext=lib + ;; + darwin* | rhapsody*) + hardcode_direct=no + if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then + : + else + ld_shlibs=no + fi + ;; + dgux*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + freebsd2.[01]*) + hardcode_direct=yes + hardcode_minus_L=yes + ;; + freebsd* | dragonfly*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + hpux9*) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + hpux10*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + hpux11*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + ;; + *) + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + irix5* | irix6* | nonstopux*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + netbsd*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + newsos6) + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + *nto* | *qnx*) + ;; + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + else + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + osf3*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + osf4* | osf5*) + if test "$GCC" = yes; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + # Both cc and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + solaris*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + sunos4*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + ;; + sysv4) + case $host_vendor in + sni) + hardcode_direct=yes # is this really true??? + ;; + siemens) + hardcode_direct=no + ;; + motorola) + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + ;; + sysv4.3*) + ;; + sysv4*MP*) + if test -d /usr/nec; then + ld_shlibs=yes + fi + ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + ;; + sysv5* | sco3.2v5* | sco5v6*) + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator=':' + ;; + uts4*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + *) + ld_shlibs=no + ;; + esac +fi + +# Check dynamic linker characteristics +# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. +# Unlike libtool.m4, here we don't care about _all_ names of the library, but +# only about the one the linker finds when passed -lNAME. This is the last +# element of library_names_spec in libtool.m4, or possibly two of them if the +# linker has special search rules. +library_names_spec= # the last element of library_names_spec in libtool.m4 +libname_spec='lib$name' +case "$host_os" in + aix3*) + library_names_spec='$libname.a' + ;; + aix[4-9]*) + library_names_spec='$libname$shrext' + ;; + amigaos*) + case "$host_cpu" in + powerpc*) + library_names_spec='$libname$shrext' ;; + m68k) + library_names_spec='$libname.a' ;; + esac + ;; + beos*) + library_names_spec='$libname$shrext' + ;; + bsdi[45]*) + library_names_spec='$libname$shrext' + ;; + cygwin* | mingw* | pw32* | cegcc*) + shrext=.dll + library_names_spec='$libname.dll.a $libname.lib' + ;; + darwin* | rhapsody*) + shrext=.dylib + library_names_spec='$libname$shrext' + ;; + dgux*) + library_names_spec='$libname$shrext' + ;; + freebsd[23].*) + library_names_spec='$libname$shrext$versuffix' + ;; + freebsd* | dragonfly*) + library_names_spec='$libname$shrext' + ;; + gnu*) + library_names_spec='$libname$shrext' + ;; + haiku*) + library_names_spec='$libname$shrext' + ;; + hpux9* | hpux10* | hpux11*) + case $host_cpu in + ia64*) + shrext=.so + ;; + hppa*64*) + shrext=.sl + ;; + *) + shrext=.sl + ;; + esac + library_names_spec='$libname$shrext' + ;; + interix[3-9]*) + library_names_spec='$libname$shrext' + ;; + irix5* | irix6* | nonstopux*) + library_names_spec='$libname$shrext' + case "$host_os" in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; + *) libsuff= shlibsuff= ;; + esac + ;; + esac + ;; + linux*oldld* | linux*aout* | linux*coff*) + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + library_names_spec='$libname$shrext' + ;; + knetbsd*-gnu) + library_names_spec='$libname$shrext' + ;; + netbsd*) + library_names_spec='$libname$shrext' + ;; + newsos6) + library_names_spec='$libname$shrext' + ;; + *nto* | *qnx*) + library_names_spec='$libname$shrext' + ;; + openbsd*) + library_names_spec='$libname$shrext$versuffix' + ;; + os2*) + libname_spec='$name' + shrext=.dll + library_names_spec='$libname.a' + ;; + osf3* | osf4* | osf5*) + library_names_spec='$libname$shrext' + ;; + rdos*) + ;; + solaris*) + library_names_spec='$libname$shrext' + ;; + sunos4*) + library_names_spec='$libname$shrext$versuffix' + ;; + sysv4 | sysv4.3*) + library_names_spec='$libname$shrext' + ;; + sysv4*MP*) + library_names_spec='$libname$shrext' + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + library_names_spec='$libname$shrext' + ;; + tpf*) + library_names_spec='$libname$shrext' + ;; + uts4*) + library_names_spec='$libname$shrext' + ;; +esac + +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' +escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` +shlibext=`echo "$shrext" | sed -e 's,^\.,,'` +escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` + +LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). + + +# Please send patches to . +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright 1992-2016 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ + linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ + kopensolaris*-gnu* | cloudabi*-eabi* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + android-linux) + os=-linux-android + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze*) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*178) + os=-lynxos178 + ;; + -lynx*5) + os=-lynxos5 + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | aarch64 | aarch64_be \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arceb \ + | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ + | avr | avr32 \ + | ba \ + | be32 | be64 \ + | bfin \ + | c4x | c8051 | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | e2k | epiphany \ + | fido | fr30 | frv | ft32 \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | hexagon \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | k1om \ + | le32 | le64 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa32r6 | mipsisa32r6el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64r6 | mipsisa64r6el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipsr5900 | mipsr5900el \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nds32 | nds32le | nds32be \ + | nios | nios2 | nios2eb | nios2el \ + | ns16k | ns32k \ + | open8 | or1k | or1knd | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pyramid \ + | riscv32 | riscv64 \ + | rl78 | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | visium \ + | we32k \ + | x86 | xc16x | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + c54x) + basic_machine=tic54x-unknown + ;; + c55x) + basic_machine=tic55x-unknown + ;; + c6x) + basic_machine=tic6x-unknown + ;; + leon|leon[3-9]) + basic_machine=sparc-$basic_machine + ;; + m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + xgate) + basic_machine=$basic_machine-unknown + os=-none + ;; + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | aarch64-* | aarch64_be-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | ba-* \ + | be32-* | be64-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* \ + | c8051-* | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | e2k-* | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | hexagon-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | k1om-* \ + | le32-* | le64-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ + | microblaze-* | microblazeel-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa32r6-* | mipsisa32r6el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64r6-* | mipsisa64r6el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipsr5900-* | mipsr5900el-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nds32-* | nds32le-* | nds32be-* \ + | nios-* | nios2-* | nios2eb-* | nios2el-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ + | or1k*-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pyramid-* \ + | riscv32-* | riscv64-* \ + | rl78-* | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ + | tahoe-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile*-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ + | vax-* \ + | visium-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + asmjs) + basic_machine=asmjs-unknown + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c54x-*) + basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c55x-*) + basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c6x-*) + basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16 | cr16-*) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + e500v[12]) + basic_machine=powerpc-unknown + os=$os"spe" + ;; + e500v[12]-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + os=$os"spe" + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + leon-*|leon[3-9]-*) + basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'` + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze*) + basic_machine=microblaze-xilinx + ;; + mingw64) + basic_machine=x86_64-pc + os=-mingw64 + ;; + mingw32) + basic_machine=i686-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + moxiebox) + basic_machine=moxie-unknown + os=-moxiebox + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + msys) + basic_machine=i686-pc + os=-msys + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + nacl) + basic_machine=le32-unknown + os=-nacl + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + neo-tandem) + basic_machine=neo-tandem + ;; + nse-tandem) + basic_machine=nse-tandem + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc | ppcbe) basic_machine=powerpc-unknown + ;; + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-* | ppc64p7-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos | rdos64) + basic_machine=x86_64-pc + os=-rdos + ;; + rdos32) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tile*) + basic_machine=$basic_machine-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* | -plan9* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* | -cloudabi* | -sortix* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ + | -linux-newlib* | -linux-musl* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \ + | -onefs* | -tirtos* | -phoenix*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -nacl*) + ;; + -ios) + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + c8051-*) + os=-elf + ;; + hexagon-*) + os=-elf + ;; + tic54x-*) + os=-coff + ;; + tic55x-*) + os=-coff + ;; + tic6x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/configure b/configure new file mode 100755 index 0000000..5635a7b --- /dev/null +++ b/configure @@ -0,0 +1,22515 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for libgtop 2.38.0. +# +# Report bugs to . +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: http://bugzilla.gnome.org/enter_bug.cgi?product=libgtop +$0: about your system, including any error possibly output +$0: before this message. Then install a modern shell, or +$0: manually run the script under such a shell if you do +$0: have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + +SHELL=${CONFIG_SHELL-/bin/sh} + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='libgtop' +PACKAGE_TARNAME='libgtop' +PACKAGE_VERSION='2.38.0' +PACKAGE_STRING='libgtop 2.38.0' +PACKAGE_BUGREPORT='http://bugzilla.gnome.org/enter_bug.cgi?product=libgtop' +PACKAGE_URL='' + +ac_unique_file="copyright.txt" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_header_list= +gt_needs= +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +GTK_DOC_USE_REBASE_FALSE +GTK_DOC_USE_REBASE_TRUE +GTK_DOC_USE_LIBTOOL_FALSE +GTK_DOC_USE_LIBTOOL_TRUE +GTK_DOC_BUILD_PDF_FALSE +GTK_DOC_BUILD_PDF_TRUE +GTK_DOC_BUILD_HTML_FALSE +GTK_DOC_BUILD_HTML_TRUE +ENABLE_GTK_DOC_FALSE +ENABLE_GTK_DOC_TRUE +HAVE_GTK_DOC_FALSE +HAVE_GTK_DOC_TRUE +GTKDOC_DEPS_LIBS +GTKDOC_DEPS_CFLAGS +HTML_DIR +GTKDOC_MKPDF +GTKDOC_REBASE +GTKDOC_CHECK_PATH +GTKDOC_CHECK +server_programs +sysdeps_suid_lib +LIBGTOP_SERVER +LIBGTOP_BINDIR +LIBGTOP_INCS +LIBGTOP_LIBS +LIBGTOP_EXTRA_LIBS +AM_CPPFLAGS +sysdeps_dir +libs_xauth +X_EXTRA_LIBS +X_LIBS +X_PRE_LIBS +X_CFLAGS +XMKMF +GETTEXT_PACKAGE +POSUB +LTLIBINTL +LIBINTL +INTLLIBS +LTLIBICONV +LIBICONV +INTL_MACOSX_LIBS +XGETTEXT_EXTRA_OPTIONS +MSGMERGE +XGETTEXT_015 +XGETTEXT +GMSGFMT_015 +MSGFMT_015 +GMSGFMT +MSGFMT +GETTEXT_MACRO_VERSION +USE_NLS +ALLOCA +DL_LIB +LIBOBJS +GLIB_LIBS +GLIB_CFLAGS +LIBGTOP_SYSDEPS_PRIVATE_FSUSAGE_FALSE +LIBGTOP_SYSDEPS_PRIVATE_FSUSAGE_TRUE +LIBGTOP_SYSDEPS_PRIVATE_MOUNTLIST_FALSE +LIBGTOP_SYSDEPS_PRIVATE_MOUNTLIST_TRUE +LIBGTOP_NEED_SERVER_FALSE +LIBGTOP_NEED_SERVER_TRUE +KVM_LIBS +libgtop_have_sysinfo +libgtop_postinstall +HACKER_MODE_FALSE +HACKER_MODE_TRUE +EXAMPLES_FALSE +EXAMPLES_TRUE +libgtop_need_server +libgtop_sysdeps_dir +CROSS_COMPILING_FALSE +CROSS_COMPILING_TRUE +LT_SYS_LIBRARY_PATH +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +ac_ct_AR +DLLTOOL +OBJDUMP +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +SED +LIBTOOL +LN_S +AR +AS +RANLIB +PERL +libgtop_top_builddir +EGREP +GREP +CPP +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +LT_VERSION_INFO +LIBGTOP_VERSION_CODE +LIBGTOP_VERSION +LIBGTOP_SERVER_VERSION +LIBGTOP_MICRO_VERSION +LIBGTOP_MINOR_VERSION +LIBGTOP_MAJOR_VERSION +ACLOCAL_AMFLAGS +HAVE_INTROSPECTION_FALSE +HAVE_INTROSPECTION_TRUE +INTROSPECTION_MAKEFILE +INTROSPECTION_LIBS +INTROSPECTION_CFLAGS +INTROSPECTION_TYPELIBDIR +INTROSPECTION_GIRDIR +INTROSPECTION_GENERATE +INTROSPECTION_COMPILER +INTROSPECTION_SCANNER +PKG_CONFIG_LIBDIR +PKG_CONFIG_PATH +PKG_CONFIG +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_introspection +enable_dependency_tracking +enable_shared +enable_static +with_pic +enable_fast_install +with_aix_soname +with_gnu_ld +with_sysroot +enable_libtool_lock +with_examples +enable_hacker_mode +enable_nls +enable_rpath +with_libiconv_prefix +with_libintl_prefix +with_x +enable_debug +enable_fatal_warnings +with_html_dir +enable_gtk_doc +enable_gtk_doc_html +enable_gtk_doc_pdf +' + ac_precious_vars='build_alias +host_alias +target_alias +PKG_CONFIG +PKG_CONFIG_PATH +PKG_CONFIG_LIBDIR +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP +LT_SYS_LIBRARY_PATH +GLIB_CFLAGS +GLIB_LIBS +XMKMF +GTKDOC_DEPS_CFLAGS +GTKDOC_DEPS_LIBS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures libgtop 2.38.0 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/libgtop] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +X features: + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of libgtop 2.38.0:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-introspection=[no/auto/yes] + Enable introspection for this build + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --enable-hacker-mode Enable building of unstable sysdeps + --disable-nls do not use Native Language Support + --disable-rpath do not hardcode runtime library paths + --enable-debug Turn on debugging [default=no] + --enable-fatal-warnings Make all warnings fatal [debug=no] + --enable-gtk-doc use gtk-doc to build documentation [[default=no]] + --enable-gtk-doc-html build documentation in html format [[default=yes]] + --enable-gtk-doc-pdf build documentation in pdf format [[default=no]] + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use + both] + --with-aix-soname=aix|svr4|both + shared library versioning (aka "SONAME") variant to + provide on AIX, [default=aix]. + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-sysroot[=DIR] Search for dependent libraries within DIR (or the + compiler's sysroot if not specified). + --with-examples Build the libgtop examples [default=yes] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib + --without-libiconv-prefix don't search for libiconv in includedir and libdir + --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib + --without-libintl-prefix don't search for libintl in includedir and libdir + --with-x use the X Window System + --with-html-dir=PATH path to installed docs + +Some influential environment variables: + PKG_CONFIG path to pkg-config utility + PKG_CONFIG_PATH + directories to add to pkg-config's search path + PKG_CONFIG_LIBDIR + path overriding pkg-config's built-in search path + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor + LT_SYS_LIBRARY_PATH + User-defined run-time library search path. + GLIB_CFLAGS C compiler flags for GLIB, overriding pkg-config + GLIB_LIBS linker flags for GLIB, overriding pkg-config + XMKMF Path to xmkmf, Makefile generator for X Window System + GTKDOC_DEPS_CFLAGS + C compiler flags for GTKDOC_DEPS, overriding pkg-config + GTKDOC_DEPS_LIBS + linker flags for GTKDOC_DEPS, overriding pkg-config + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +libgtop configure 2.38.0 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} +( $as_echo "## ---------------------------------------------------------------------- ## +## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=libgtop ## +## ---------------------------------------------------------------------- ##" + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_check_type LINENO TYPE VAR INCLUDES +# ------------------------------------------- +# Tests whether TYPE exists after having included INCLUDES, setting cache +# variable VAR accordingly. +ac_fn_c_check_type () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_type + +# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES +# ---------------------------------------------------- +# Tries to find if the field MEMBER exists in type AGGR, after including +# INCLUDES, setting cache variable VAR accordingly. +ac_fn_c_check_member () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5 +$as_echo_n "checking for $2.$3... " >&6; } +if eval \${$4+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$5 +int +main () +{ +static $2 ac_aggr; +if (ac_aggr.$3) +return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$4=yes" +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$5 +int +main () +{ +static $2 ac_aggr; +if (sizeof ac_aggr.$3) +return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$4=yes" +else + eval "$4=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$4 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_member +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by libgtop $as_me 2.38.0, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +as_fn_append ac_header_list " stdlib.h" +as_fn_append ac_header_list " unistd.h" +as_fn_append ac_header_list " sys/param.h" +gt_needs="$gt_needs " +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +ac_config_headers="$ac_config_headers config.h" + + +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + + +am__api_version='1.15' + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='libgtop' + VERSION='2.38.0' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar plaintar pax cpio none' + +# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether UID '$am_uid' is supported by ustar format" >&5 +$as_echo_n "checking whether UID '$am_uid' is supported by ustar format... " >&6; } + if test $am_uid -le $am_max_uid; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + _am_tools=none + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether GID '$am_gid' is supported by ustar format" >&5 +$as_echo_n "checking whether GID '$am_gid' is supported by ustar format... " >&6; } + if test $am_gid -le $am_max_gid; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + _am_tools=none + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a ustar tar archive" >&5 +$as_echo_n "checking how to create a ustar tar archive... " >&6; } + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_ustar-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + { echo "$as_me:$LINENO: $_am_tar --version" >&5 + ($_am_tar --version) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && break + done + am__tar="$_am_tar --format=ustar -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=ustar -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x ustar -w "$$tardir"' + am__tar_='pax -L -x ustar -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H ustar -L' + am__tar_='find "$tardir" -print | cpio -o -H ustar -L' + am__untar='cpio -i -H ustar -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_ustar}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + { echo "$as_me:$LINENO: tardir=conftest.dir && eval $am__tar_ >conftest.tar" >&5 + (tardir=conftest.dir && eval $am__tar_ >conftest.tar) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + rm -rf conftest.dir + if test -s conftest.tar; then + { echo "$as_me:$LINENO: $am__untar &5 + ($am__untar &5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { echo "$as_me:$LINENO: cat conftest.dir/file" >&5 + (cat conftest.dir/file) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + grep GrepMe conftest.dir/file >/dev/null 2>&1 && break + fi + done + rm -rf conftest.dir + + if ${am_cv_prog_tar_ustar+:} false; then : + $as_echo_n "(cached) " >&6 +else + am_cv_prog_tar_ustar=$_am_tool +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_ustar" >&5 +$as_echo "$am_cv_prog_tar_ustar" >&6; } + + + + + + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=0;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + + + + + + + + + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. +set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +PKG_CONFIG=$ac_cv_path_PKG_CONFIG +if test -n "$PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 +$as_echo "$PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_PKG_CONFIG"; then + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +if test -n "$ac_pt_PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 +$as_echo "$ac_pt_PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_PKG_CONFIG" = x; then + PKG_CONFIG="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + PKG_CONFIG=$ac_pt_PKG_CONFIG + fi +else + PKG_CONFIG="$ac_cv_path_PKG_CONFIG" +fi + +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.9.0 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 +$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + PKG_CONFIG="" + fi +fi + + + + # Check whether --enable-introspection was given. +if test "${enable_introspection+set}" = set; then : + enableval=$enable_introspection; +else + enable_introspection=auto +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gobject-introspection" >&5 +$as_echo_n "checking for gobject-introspection... " >&6; } + + case $enable_introspection in #( + no) : + found_introspection="no (disabled, use --enable-introspection to enable)" + ;; #( + yes) : + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + : +else + as_fn_error $? "gobject-introspection-1.0 is not installed" "$LINENO" 5 +fi + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0 >= 0.6.7\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0 >= 0.6.7") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + found_introspection=yes +else + as_fn_error $? "You need to have gobject-introspection >= 0.6.7 installed to build libgtop" "$LINENO" 5 +fi + ;; #( + auto) : + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0 >= 0.6.7\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0 >= 0.6.7") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + found_introspection=yes +else + found_introspection=no +fi + ;; #( + *) : + as_fn_error $? "invalid argument passed to --enable-introspection, should be one of [no/auto/yes]" "$LINENO" 5 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_introspection" >&5 +$as_echo "$found_introspection" >&6; } + + INTROSPECTION_SCANNER= + INTROSPECTION_COMPILER= + INTROSPECTION_GENERATE= + INTROSPECTION_GIRDIR= + INTROSPECTION_TYPELIBDIR= + if test "x$found_introspection" = "xyes"; then + INTROSPECTION_SCANNER=`$PKG_CONFIG --variable=g_ir_scanner gobject-introspection-1.0` + INTROSPECTION_COMPILER=`$PKG_CONFIG --variable=g_ir_compiler gobject-introspection-1.0` + INTROSPECTION_GENERATE=`$PKG_CONFIG --variable=g_ir_generate gobject-introspection-1.0` + INTROSPECTION_GIRDIR=`$PKG_CONFIG --variable=girdir gobject-introspection-1.0` + INTROSPECTION_GIRDIR=`echo ${INTROSPECTION_GIRDIR} | sed -e "s|${datadir}|\\\$(datadir)|"` + INTROSPECTION_TYPELIBDIR="$($PKG_CONFIG --variable=typelibdir gobject-introspection-1.0)" + INTROSPECTION_TYPELIBDIR=`echo ${INTROSPECTION_TYPELIBDIR} | sed -e "s|${libdir}|\\\$(libdir)|"` + INTROSPECTION_CFLAGS=`$PKG_CONFIG --cflags gobject-introspection-1.0` + INTROSPECTION_LIBS=`$PKG_CONFIG --libs gobject-introspection-1.0` + INTROSPECTION_MAKEFILE=`$PKG_CONFIG --variable=datadir gobject-introspection-1.0`/gobject-introspection-1.0/Makefile.introspection + fi + + + + + + + + + + if test "x$found_introspection" = "xyes"; then + HAVE_INTROSPECTION_TRUE= + HAVE_INTROSPECTION_FALSE='#' +else + HAVE_INTROSPECTION_TRUE='#' + HAVE_INTROSPECTION_FALSE= +fi + + + + +ACLOCAL_AMFLAGS=\${ACLOCAL_FLAGS} + + +LIBGTOP_MAJOR_VERSION=2 + +LIBGTOP_MINOR_VERSION=38 + +LIBGTOP_MICRO_VERSION=0 + +LIBGTOP_SERVER_VERSION=5 + +LIBGTOP_VERSION=2.38.0 + +LIBGTOP_VERSION_CODE=2038000 + + +# libtool versioning +LT_VERSION_INFO="-version-info 11:0:0" + + +ACLOCAL_FLAGS="$ACLOCAL_FLAGS -I ." + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5 +$as_echo_n "checking for library containing strerror... " >&6; } +if ${ac_cv_search_strerror+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char strerror (); +int +main () +{ +return strerror (); + ; + return 0; +} +_ACEOF +for ac_lib in '' cposix; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_strerror=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_strerror+:} false; then : + break +fi +done +if ${ac_cv_search_strerror+:} false; then : + +else + ac_cv_search_strerror=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5 +$as_echo "$ac_cv_search_strerror" >&6; } +ac_res=$ac_cv_search_strerror +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + + +libgtop_top_builddir=`pwd` + + +for ac_prog in gawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +test -z "$AWK" && as_fn_error $? "Sorry, you need a working awk interpreter." "$LINENO" 5 + +for ac_prog in perl5 perl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_PERL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$PERL"; then + ac_cv_prog_PERL="$PERL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_PERL="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +PERL=$ac_cv_prog_PERL +if test -n "$PERL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PERL" >&5 +$as_echo "$PERL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$PERL" && break +done + +test -z "$PERL" && as_fn_error $? "You need to have a working perl interpreter." "$LINENO" 5 + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AS="${ac_tool_prefix}as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AS=$ac_cv_prog_AS +if test -n "$AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 +$as_echo "$AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. +set dummy as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AS"; then + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AS="as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AS=$ac_cv_prog_ac_ct_AS +if test -n "$ac_ct_AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 +$as_echo "$ac_ct_AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AS" = x; then + AS="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi +else + AS="$ac_cv_prog_AS" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AR" = x; then + AR="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +else + AR="$ac_cv_prog_AR" +fi + + +export CC CXX RANLIB LD AS AR + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + + +export cross_compiling + +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.4.6' +macro_revision='2.4.6' + + + + + + + + + + + + + +ltmain=$ac_aux_dir/ltmain.sh + +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case $ECHO in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_FGREP" || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test yes = "$GCC"; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return, which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD=$ac_prog + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test yes = "$with_gnu_ld"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD=$ac_dir/$ac_prog + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM=$NM +else + lt_nm_to_check=${ac_tool_prefix}nm + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break 2 + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break 2 + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS=$lt_save_ifs + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols -headers" + ;; + *) + DUMPBIN=: + ;; + esac + fi + + if test : != "$DUMPBIN"; then + NM=$DUMPBIN + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } + +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring=ABCD + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len" && \ + test undefined != "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test 17 != "$i" # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n "$lt_cv_sys_max_cmd_len"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +$as_echo_n "checking how to convert $build file names to $host format... " >&6; } +if ${lt_cv_to_host_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac + +fi + +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +$as_echo "$lt_cv_to_host_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } +if ${lt_cv_to_tool_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac + +fi + +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +$as_echo "$lt_cv_to_tool_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test yes != "$GCC"; then + reload_cmds=false + fi + ;; + darwin*) + if test yes = "$GCC"; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if ${lt_cv_deplibs_check_method+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# 'unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +$as_echo_n "checking how to associate runtime and link libraries... " >&6; } +if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd=$ECHO + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + + + + + + + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} +: ${AR_FLAGS=cru} + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +$as_echo_n "checking for archiver @FILE support... " >&6; } +if ${lt_cv_ar_at_file+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test 0 -eq "$ac_status"; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test 0 -ne "$ac_status"; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +$as_echo "$lt_cv_ar_at_file" >&6; } + +if test no = "$lt_cv_ar_at_file"; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + bitrig* | openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if ${lt_cv_sys_global_symbol_pipe+:} false; then : + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test ia64 = "$host_cpu"; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined __osf__ +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS=conftstm.$ac_objext + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest$ac_exeext; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test yes = "$pipe_works"; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +$as_echo_n "checking for sysroot... " >&6; } + +# Check whether --with-sysroot was given. +if test "${with_sysroot+set}" = set; then : + withval=$with_sysroot; +else + with_sysroot=no +fi + + +lt_sysroot= +case $with_sysroot in #( + yes) + if test yes = "$GCC"; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 +$as_echo "$with_sysroot" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +$as_echo "${lt_sysroot:-no}" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 +$as_echo_n "checking for a working dd... " >&6; } +if ${ac_cv_path_lt_DD+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +if test -z "$lt_DD"; then + ac_path_lt_DD_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in dd; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_lt_DD" || continue +if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi + $ac_path_lt_DD_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_lt_DD"; then + : + fi +else + ac_cv_path_lt_DD=$lt_DD +fi + +rm -f conftest.i conftest2.i conftest.out +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 +$as_echo "$ac_cv_path_lt_DD" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 +$as_echo_n "checking how to truncate binary pipes... " >&6; } +if ${lt_cv_truncate_bin+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 +$as_echo "$lt_cv_truncate_bin" >&6; } + + + + + + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test no = "$enable_libtool_lock" || enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE=32 + ;; + *ELF-64*) + HPUX_IA64_MODE=64 + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test yes = "$lt_cv_prog_gnu_ld"; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + case `/usr/bin/file conftest.o` in + *x86-64*) + LD="${LD-ld} -m elf32_x86_64" + ;; + *) + LD="${LD-ld} -m elf_i386" + ;; + esac + ;; + powerpc64le-*linux*) + LD="${LD-ld} -m elf32lppclinux" + ;; + powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + powerpcle-*linux*) + LD="${LD-ld} -m elf64lppc" + ;; + powerpc-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS=$CFLAGS + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test yes != "$lt_cv_cc_needs_belf"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS=$SAVE_CFLAGS + fi + ;; +*-*solaris*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*|x86_64-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD=${LD-ld}_sol2 + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks=$enable_libtool_lock + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +$as_echo "$MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + fi +else + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" +fi + +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if ${lt_cv_path_mainfest_tool+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +$as_echo "$lt_cv_path_mainfest_tool" >&6; } +if test yes != "$lt_cv_path_mainfest_tool"; then + MANIFEST_TOOL=: +fi + + + + + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if ${lt_cv_apple_cc_single_mod+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "$LT_MULTI_MODULE"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if ${lt_cv_ld_exported_symbols_list+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes +else + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if ${lt_cv_ld_force_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[012][,.]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test yes = "$lt_cv_apple_cc_single_mod"; then + _lt_dar_single_mod='$single_module' + fi + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' + fi + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi + +done + + + + + +# Set options + + + + enable_dlopen=no + + + enable_win32_dll=no + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_static=yes +fi + + + + + + + + + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for lt_pkg in $withval; do + IFS=$lt_save_ifs + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + pic_mode=default +fi + + + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[5-9]*,yes) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 +$as_echo_n "checking which variant of shared library versioning to provide... " >&6; } + +# Check whether --with-aix-soname was given. +if test "${with_aix_soname+set}" = set; then : + withval=$with_aix_soname; case $withval in + aix|svr4|both) + ;; + *) + as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname +else + if ${lt_cv_with_aix_soname+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_with_aix_soname=aix +fi + + with_aix_soname=$lt_cv_with_aix_soname +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 +$as_echo "$with_aix_soname" >&6; } + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS=$ltmain + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld=$lt_cv_prog_gnu_ld + +old_CC=$CC +old_CFLAGS=$CFLAGS + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +func_cc_basename $compiler +cc_basename=$func_cc_basename_result + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/${ac_tool_prefix}file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac +fi + +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac +fi + +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC=$CC +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test yes = "$GCC"; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + + + if test yes = "$GCC"; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + lt_prog_compiler_pic='-fPIC' + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='$wl-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + # old Intel for x86_64, which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms that do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +$as_echo "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if ${lt_cv_prog_compiler_pic_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_pic_works"; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_static_works"; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links=nottested +if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test no = "$hard_links"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test yes != "$GCC"; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd* | bitrig*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test yes = "$with_gnu_ld"; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test yes = "$lt_use_gnu_ld_interface"; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='$wl' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + export_dynamic_flag_spec='$wl--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test ia64 != "$host_cpu"; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='$wl--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test linux-dietlibc = "$host_os"; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test no = "$tmp_diet" + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + + if test yes = "$supports_anon_versioning"; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + tcc*) + export_dynamic_flag_spec='-rdynamic' + ;; + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test yes = "$supports_anon_versioning"; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test no = "$ld_shlibs"; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test ia64 = "$host_cpu"; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag= + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then + aix_use_runtimelinking=yes + break + fi + done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + hardcode_direct=no + hardcode_direct_absolute=no + ;; + esac + + if test yes = "$GCC"; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`$CC -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' + fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' + else + # not using gcc + if test ia64 = "$host_cpu"; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' + else + shared_flag='$wl-bM:SRE' + fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' + fi + fi + + export_dynamic_flag_spec='$wl-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=/usr/lib:/lib + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag + else + if test ia64 = "$host_cpu"; then + hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=/usr/lib:/lib + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' $wl-bernotok' + allow_undefined_flag=' $wl-berok' + if test yes = "$with_gnu_ld"; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test yes = "$lt_cv_ld_force_load"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag=$_lt_dar_allow_undefined + case $cc_basename in + ifort*|nagfor*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test yes = "$_lt_dar_can_shared"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test yes = "$GCC"; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='$wl-E' + ;; + + hpux10*) + if test yes,no = "$GCC,$with_gnu_ld"; then + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='$wl-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test yes,no = "$GCC,$with_gnu_ld"; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if ${lt_cv_prog_compiler__b+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } + +if test yes = "$lt_cv_prog_compiler__b"; then + archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi + + ;; + esac + fi + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='$wl-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test yes = "$GCC"; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : + $as_echo_n "(cached) " >&6 +else + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test yes = "$lt_cv_irix_exported_symbol"; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' + fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + ld_shlibs=yes + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd* | bitrig*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' + else + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + + osf3*) + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test yes = "$GCC"; then + wlarc='$wl' + archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='$wl' + archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands '-z linker_flag'. GCC discards it without '$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test yes = "$GCC"; then + whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test sequent = "$host_vendor"; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='$wl-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We CANNOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='$wl-z,text' + allow_undefined_flag='$wl-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='$wl-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='$wl-Bexport' + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test sni = "$host_vendor"; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='$wl-Blargedynsym' + ;; + esac + fi + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test no = "$ld_shlibs" && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test yes,yes = "$GCC,$enable_shared"; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test yes = "$GCC"; then + case $host_os in + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary... + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo = "/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's|/\([A-Za-z]:\)|\1|g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=.so +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + + + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='$libname$release$shared_ext$major' + ;; + +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test ia64 = "$host_cpu"; then + # AIX 5 supports IA64 + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a(lib.so.V)' + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='$libname$shared_ext' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec=$LIB + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=no + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 + fi + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test yes = "$lt_cv_prog_gnu_ld"; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + hardcode_libdir_flag_spec='-L$libdir' + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Add ABI-specific directories to the system library path. + sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" + + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd* | bitrig*) + version_type=sunos + sys_lib_dlsearch_path_spec=/usr/lib + need_lib_prefix=no + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no + else + need_version=yes + fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +os2*) + libname_spec='$name' + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test yes = "$with_gnu_ld"; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec; then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=sco + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test yes = "$with_gnu_ld"; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test no = "$dynamic_linker" && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test yes = "$GCC"; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec +fi + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec +fi + +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test yes = "$hardcode_automatic"; then + + # We can hardcode non-existent directories. + if test no != "$hardcode_direct" && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && + test no != "$hardcode_minus_L"; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test relink = "$hardcode_action" || + test yes = "$inherit_rpath"; then + # Fast installation is not supported + enable_fast_install=no +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test yes != "$enable_dlopen"; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen=load_add_on + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen=LoadLibrary + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl +else + + lt_cv_dlopen=dyld + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : + lt_cv_dlopen=shl_load +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + lt_cv_dlopen=dlopen +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if ${ac_cv_lib_svld_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if ${ac_cv_lib_dld_dld_link+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : + lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test no = "$lt_cv_dlopen"; then + enable_dlopen=no + else + enable_dlopen=yes + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS=$LDFLAGS + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS=$LIBS + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test yes = "$cross_compiling"; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test yes = "$lt_cv_dlopen_self"; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self_static+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test yes = "$cross_compiling"; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP"; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report what library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC=$lt_save_CC + + + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + + + if test "x$cross_compiling" = xyes; then + CROSS_COMPILING_TRUE= + CROSS_COMPILING_FALSE='#' +else + CROSS_COMPILING_TRUE='#' + CROSS_COMPILING_FALSE= +fi + + + + + + + + + +# Check whether --with-examples was given. +if test "${with_examples+set}" = set; then : + withval=$with_examples; + build_examples="$withval" +else + build_examples=yes +fi + + + if test x"$build_examples" = xyes; then + EXAMPLES_TRUE= + EXAMPLES_FALSE='#' +else + EXAMPLES_TRUE='#' + EXAMPLES_FALSE= +fi + + + # Check whether --enable-hacker-mode was given. +if test "${enable_hacker_mode+set}" = set; then : + enableval=$enable_hacker_mode; hacker_mode="$enableval" +else + hacker_mode=no +fi + + + if test x"$hacker_mode" = xyes; then + HACKER_MODE_TRUE= + HACKER_MODE_FALSE='#' +else + HACKER_MODE_TRUE='#' + HACKER_MODE_FALSE= +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libgtop sysdeps directory" >&5 +$as_echo_n "checking for libgtop sysdeps directory... " >&6; } + + case "$host_os" in + linux*) + libgtop_sysdeps_dir=linux + libgtop_have_sysinfo=yes + libgtop_need_server=no + libgtop_sysdeps_private_mountlist=yes + libgtop_sysdeps_private_fsusage=yes + ;; + netbsd*|bsdi*) + libgtop_sysdeps_dir=bsd + libgtop_need_server=yes + libgtop_postinstall='chgrp kmem $(bindir)/libgtop_server2 && chmod 2755 $(bindir)/libgtop_server2' + ;; + openbsd*) + libgtop_sysdeps_dir=openbsd + libgtop_need_server=yes + libgtop_sysdeps_private_mountlist=yes + libgtop_sysdeps_private_fsusage=yes + libgtop_postinstall='chgrp kmem $(bindir)/libgtop_server2 && chmod 2555 $(bindir)/libgtop_server2' + ;; + freebsd*|kfreebsd*) + libgtop_sysdeps_dir=freebsd + libgtop_need_server=yes + libgtop_sysdeps_private_mountlist=yes + libgtop_sysdeps_private_fsusage=yes + libgtop_postinstall='chgrp kmem $(bindir)/libgtop_server2 && chmod 2755 $(bindir)/libgtop_server2' + ;; + solaris*) + libgtop_sysdeps_dir=solaris + libgtop_need_server=yes + libgtop_postinstall='chgrp sys $(bindir)/libgtop_server && chmod 2755 $(bindir)/libgtop_server' + ;; + aix*) + libgtop_sysdeps_dir=aix + libgtop_need_server=yes + libgtop_have_sysinfo=yes + libgtop_postinstall='chgrp system $(bindir)/libgtop_server && chmod g+s $(bindir)/libgtop_server2' + ;; + darwin*) + libgtop_sysdeps_dir=darwin + libgtop_need_server=yes + libgtop_have_sysinfo=yes + libgtop_postinstall='chgrp kmem $(bindir)/libgtop_server2 && chmod g+s $(bindir)/libgtop_server2' + ;; + cygwin*) + libgtop_sysdeps_dir=cygwin + libgtop_need_server=no + libgtop_have_sysinfo=yes + libgtop_sysdeps_private_mountlist=yes + ;; + *) + if test x$hacker_mode = xyes ; then + case "$host_os" in + sunos4*) + #Please note that this port is obsolete and not working at + #all. It is only useful for people who want to fix it ... :-) + libgtop_sysdeps_dir=sun4 + libgtop_need_server=yes + ;; + osf*) + libgtop_sysdeps_dir=osf1 + libgtop_need_server=yes + ;; + *) + libgtop_sysdeps_dir=stub + libgtop_need_server=no + ;; + esac + else + libgtop_sysdeps_dir=stub + libgtop_need_server=no + fi + ;; + esac + + test -z "$libgtop_postinstall" && libgtop_postinstall=: + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $libgtop_sysdeps_dir" >&5 +$as_echo "$libgtop_sysdeps_dir" >&6; } + + + + + + case "$host_os" in + *bsd*) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for kvm_open in -lkvm" >&5 +$as_echo_n "checking for kvm_open in -lkvm... " >&6; } +if ${ac_cv_lib_kvm_kvm_open+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lkvm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char kvm_open (); +int +main () +{ +return kvm_open (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_kvm_kvm_open=yes +else + ac_cv_lib_kvm_kvm_open=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_kvm_kvm_open" >&5 +$as_echo "$ac_cv_lib_kvm_kvm_open" >&6; } +if test "x$ac_cv_lib_kvm_kvm_open" = xyes; then : + KVM_LIBS=-lkvm +else + KVM_LIBS= +fi + + + + for ac_header in net/if_var.h +do : + ac_fn_c_check_header_compile "$LINENO" "net/if_var.h" "ac_cv_header_net_if_var_h" " +#include +#include +#include +" +if test "x$ac_cv_header_net_if_var_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_NET_IF_VAR_H 1 +_ACEOF + +fi + +done + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for I4B" >&5 +$as_echo_n "checking for I4B... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +#include +#include + +#ifdef HAVE_NET_IF_VAR_H +#include +#endif + +#include +#include + +#if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__FreeBSD_kernel__) +#include +#else +#include +#endif + +int +main () +{ + + size_t size = sizeof (struct sppp); + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + have_i4b=yes +else + have_i4b=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_i4b" >&5 +$as_echo "$have_i4b" >&6; } + if test x$have_i4b = xyes; then + +$as_echo "#define HAVE_I4B 1" >>confdefs.h + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for I4B accounting" >&5 +$as_echo_n "checking for I4B accounting... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +#include +#include + +#ifdef HAVE_NET_IF_VAR_H +#include +#endif + +#include +#include + +#if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__FreeBSD_kernel__) +#include +#else +#include +#endif + +#include + +int +main () +{ + + size_t size = sizeof (struct i4bisppp_softc); + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + have_i4b_acct=yes +else + have_i4b_acct=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_i4b_acct" >&5 +$as_echo "$have_i4b_acct" >&6; } + if test x$have_i4b_acct = xyes ; then + +$as_echo "#define HAVE_I4B_ACCT 1" >>confdefs.h + + else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: +*** I4B accounting disabled - you won't get any PPP statistics. +*** Read \"misc/i4b_acct.txt\" in the LibGTop source directory +*** to see how to enable it." >&5 +$as_echo "$as_me: WARNING: +*** I4B accounting disabled - you won't get any PPP statistics. +*** Read \"misc/i4b_acct.txt\" in the LibGTop source directory +*** to see how to enable it." >&2;} + fi + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking what we need to define to get struct msginfo" >&5 +$as_echo_n "checking what we need to define to get struct msginfo... " >&6; } + if ${msginfo_cv_needs+:} false; then : + $as_echo_n "(cached) " >&6 +else + msginfo_cv_needs= + for def in nothing KERNEL _KERNEL; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#define $def +#include +#include +#include +#include + +int +main (void) +{ + struct msginfo mi; + mi.msgmax = 0; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + msginfo_cv_needs=$def + if test ${msginfo_cv_needs} = KERNEL; then + +$as_echo "#define STRUCT_MSGINFO_NEEDS_KERNEL 1" >>confdefs.h + + elif test ${msginfo_cv_needs} = _KERNEL; then + +$as_echo "#define STRUCT_MSGINFO_NEEDS__KERNEL 1" >>confdefs.h + + fi + + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test -n "${msginfo_cv_needs}" && break + done + +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $msginfo_cv_needs" >&5 +$as_echo "$msginfo_cv_needs" >&6; } + if test -z "${msginfo_cv_needs}"; then + as_fn_error $? "Could not find the definition of 'struct msginfo'" "$LINENO" 5 + fi + ;; + linux*) + os_major_version=`uname -r | sed 's/-pre[0-9]*//' | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'` + os_minor_version=`uname -r | sed 's/-pre[0-9]*//' | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'` + os_micro_version=`uname -r | sed 's/-pre[0-9]*//' | \ + sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'` + os_version_expr="$os_major_version 65536 * $os_minor_version 256 * + $os_micro_version + p q" + + for ac_header in linux/version.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "linux/version.h" "ac_cv_header_linux_version_h" "$ac_includes_default" +if test "x$ac_cv_header_linux_version_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LINUX_VERSION_H 1 +_ACEOF + have_linux_version_h=yes +else + have_linux_version_h=no +fi + +done + + + if test x$have_linux_version_h = xyes ; then + version_code=`cat /usr/include/linux/version.h | \ + grep \#define | grep LINUX_VERSION_CODE` + os_version_code=`echo $version_code | \ + sed 's/^.*LINUX_VERSION_CODE[ \t]*\([0-9]*\).*$/\1/'` + else + os_version_code=`echo "$os_version_expr" | dc` + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Linux kernel version code" >&5 +$as_echo_n "checking for Linux kernel version code... " >&6; } + +cat >>confdefs.h <<_ACEOF +#define GLIBTOP_LINUX_VERSION_CODE $os_version_code +_ACEOF + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $os_version_code" >&5 +$as_echo "$os_version_code" >&6; } + ;; + solaris*) + os_major_version=`uname -r | sed 's/\([0-9]*\).\([0-9]*\)\.*\([0-9]*\)/\1/'` + os_minor_version=`uname -r | sed 's/\([0-9]*\).\([0-9]*\)\.*\([0-9]*\)/\2/'` + os_micro_version=`uname -r | sed 's/\([0-9]*\).\([0-9]*\)\.*\([0-9]*\)/\3/'` + test -z "$os_micro_version" && os_micro_version=0 + os_version_expr="$os_major_version 10000 * $os_minor_version 100 * + $os_micro_version + p q" + os_version_code=`echo "$os_version_expr" | dc` + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Solaris release code" >&5 +$as_echo_n "checking for Solaris release code... " >&6; } + +cat >>confdefs.h <<_ACEOF +#define GLIBTOP_SOLARIS_RELEASE $os_version_code +_ACEOF + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $os_version_code" >&5 +$as_echo "$os_version_code" >&6; } + ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we need libgtop" >&5 +$as_echo_n "checking whether we need libgtop... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $libgtop_need_server" >&5 +$as_echo "$libgtop_need_server" >&6; } + + if test x$libgtop_need_server = xyes ; then + +$as_echo "#define LIBGTOP_NEED_SERVER 1" >>confdefs.h + + fi + + if test x$libgtop_need_server = xyes; then + LIBGTOP_NEED_SERVER_TRUE= + LIBGTOP_NEED_SERVER_FALSE='#' +else + LIBGTOP_NEED_SERVER_TRUE='#' + LIBGTOP_NEED_SERVER_FALSE= +fi + + if test x$libgtop_sysdeps_private_mountlist = xyes; then + LIBGTOP_SYSDEPS_PRIVATE_MOUNTLIST_TRUE= + LIBGTOP_SYSDEPS_PRIVATE_MOUNTLIST_FALSE='#' +else + LIBGTOP_SYSDEPS_PRIVATE_MOUNTLIST_TRUE='#' + LIBGTOP_SYSDEPS_PRIVATE_MOUNTLIST_FALSE= +fi + + if test x$libgtop_sysdeps_private_fsusage = xyes; then + LIBGTOP_SYSDEPS_PRIVATE_FSUSAGE_TRUE= + LIBGTOP_SYSDEPS_PRIVATE_FSUSAGE_FALSE='#' +else + LIBGTOP_SYSDEPS_PRIVATE_FSUSAGE_TRUE='#' + LIBGTOP_SYSDEPS_PRIVATE_FSUSAGE_FALSE= +fi + + + + for ac_header in sys/bitypes.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "sys/bitypes.h" "ac_cv_header_sys_bitypes_h" "$ac_includes_default" +if test "x$ac_cv_header_sys_bitypes_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYS_BITYPES_H 1 +_ACEOF + +fi + +done + + + +GLIB_REQUIRED=2.6.0 +GOBJECT_REQUIRED=2.26.0 + + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GLIB" >&5 +$as_echo_n "checking for GLIB... " >&6; } + +if test -n "$GLIB_CFLAGS"; then + pkg_cv_GLIB_CFLAGS="$GLIB_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0 >= \$GOBJECT_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GOBJECT_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GLIB_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GOBJECT_REQUIRED" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$GLIB_LIBS"; then + pkg_cv_GLIB_LIBS="$GLIB_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0 >= \$GOBJECT_REQUIRED\""; } >&5 + ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GOBJECT_REQUIRED") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GLIB_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GOBJECT_REQUIRED" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GOBJECT_REQUIRED" 2>&1` + else + GLIB_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GOBJECT_REQUIRED" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$GLIB_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0 >= $GOBJECT_REQUIRED) were not met: + +$GLIB_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables GLIB_CFLAGS +and GLIB_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables GLIB_CFLAGS +and GLIB_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see . +See \`config.log' for more details" "$LINENO" 5; } +else + GLIB_CFLAGS=$pkg_cv_GLIB_CFLAGS + GLIB_LIBS=$pkg_cv_GLIB_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + + + +ac_fn_c_check_header_mongrel "$LINENO" "ifaddrs.h" "ac_cv_header_ifaddrs_h" "$ac_includes_default" +if test "x$ac_cv_header_ifaddrs_h" = xyes; then : + HAVE_IFADDRS_H=yes +else + HAVE_IFADDRS_H=no +fi + + +if test x$HAVE_IFADDRS_H = xyes ; then + +$as_echo "#define HAVE_IFADDRS_H 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 +$as_echo_n "checking for an ANSI C-conforming const... " >&6; } +if ${ac_cv_c_const+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + +#ifndef __cplusplus + /* Ultrix mips cc rejects this sort of thing. */ + typedef int charset[2]; + const charset cs = { 0, 0 }; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this sort of thing. */ + char tx; + char *t = &tx; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; } bx; + struct s *b = &bx; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_const=yes +else + ac_cv_c_const=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 +$as_echo "$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then + +$as_echo "#define const /**/" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 +$as_echo_n "checking for inline... " >&6; } +if ${ac_cv_c_inline+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_c_inline=no +for ac_kw in inline __inline__ __inline; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifndef __cplusplus +typedef int foo_t; +static $ac_kw foo_t static_foo () {return 0; } +$ac_kw foo_t foo () {return 0; } +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_inline=$ac_kw +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test "$ac_cv_c_inline" != no && break +done + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 +$as_echo "$ac_cv_c_inline" >&6; } + +case $ac_cv_c_inline in + inline | yes) ;; + *) + case $ac_cv_c_inline in + no) ac_val=;; + *) ac_val=$ac_cv_c_inline;; + esac + cat >>confdefs.h <<_ACEOF +#ifndef __cplusplus +#define inline $ac_val +#endif +_ACEOF + ;; +esac + +ac_fn_c_check_type "$LINENO" "off_t" "ac_cv_type_off_t" "$ac_includes_default" +if test "x$ac_cv_type_off_t" = xyes; then : + +else + +cat >>confdefs.h <<_ACEOF +#define off_t long int +_ACEOF + +fi + +ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default" +if test "x$ac_cv_type_pid_t" = xyes; then : + +else + +cat >>confdefs.h <<_ACEOF +#define pid_t int +_ACEOF + +fi + +ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" +if test "x$ac_cv_type_size_t" = xyes; then : + +else + +cat >>confdefs.h <<_ACEOF +#define size_t unsigned int +_ACEOF + +fi + +ac_fn_c_check_member "$LINENO" "struct stat" "st_rdev" "ac_cv_member_struct_stat_st_rdev" "$ac_includes_default" +if test "x$ac_cv_member_struct_stat_st_rdev" = xyes; then : + +cat >>confdefs.h <<_ACEOF +#define HAVE_STRUCT_STAT_ST_RDEV 1 +_ACEOF + + +$as_echo "#define HAVE_ST_RDEV 1" >>confdefs.h + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5 +$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } +if ${ac_cv_header_time+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include + +int +main () +{ +if ((struct tm *) 0) +return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_time=yes +else + ac_cv_header_time=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5 +$as_echo "$ac_cv_header_time" >&6; } +if test $ac_cv_header_time = yes; then + +$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5 +$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } +if ${ac_cv_struct_tm+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include + +int +main () +{ +struct tm tm; + int *p = &tm.tm_sec; + return !p; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_struct_tm=time.h +else + ac_cv_struct_tm=sys/time.h +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5 +$as_echo "$ac_cv_struct_tm" >&6; } +if test $ac_cv_struct_tm = sys/time.h; then + +$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5 +$as_echo_n "checking for uid_t in sys/types.h... " >&6; } +if ${ac_cv_type_uid_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "uid_t" >/dev/null 2>&1; then : + ac_cv_type_uid_t=yes +else + ac_cv_type_uid_t=no +fi +rm -f conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5 +$as_echo "$ac_cv_type_uid_t" >&6; } +if test $ac_cv_type_uid_t = no; then + +$as_echo "#define uid_t int" >>confdefs.h + + +$as_echo "#define gid_t int" >>confdefs.h + +fi + + +ac_fn_c_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" "$ac_includes_default" +if test "x$ac_cv_type_ssize_t" = xyes; then : + +else + +cat >>confdefs.h <<_ACEOF +#define ssize_t int +_ACEOF + +fi + +for ac_header in memory.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "memory.h" "ac_cv_header_memory_h" "$ac_includes_default" +if test "x$ac_cv_header_memory_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_MEMORY_H 1 +_ACEOF + +fi + +done + +for ac_header in string.h strings.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + break +fi + +done + +ac_fn_c_check_func "$LINENO" "strerror" "ac_cv_func_strerror" +if test "x$ac_cv_func_strerror" = xyes; then : + $as_echo "#define HAVE_STRERROR 1" >>confdefs.h + +else + case " $LIBOBJS " in + *" strerror.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS strerror.$ac_objext" + ;; +esac + +fi + + + +DL_LIB= +for ac_func in dlopen +do : + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLOPEN 1 +_ACEOF + +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + DL_LIB="-ldl" +else + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + DL_LIB="-ldld" +else + + for ac_func in dlopen +do : + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLOPEN 1 +_ACEOF + DL_LIB="" +else + DL_LIB="" +fi +done + + +fi + + +fi + + +fi +done + +oLIBS="$LIBS" +LIBS="$LIBS $DL_LIB" +for ac_func in dlerror +do : + ac_fn_c_check_func "$LINENO" "dlerror" "ac_cv_func_dlerror" +if test "x$ac_cv_func_dlerror" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLERROR 1 +_ACEOF + +fi +done + +LIBS="$oLIBS" + + +ac_fn_c_check_header_mongrel "$LINENO" "linux/isdn.h" "ac_cv_header_linux_isdn_h" "$ac_includes_default" +if test "x$ac_cv_header_linux_isdn_h" = xyes; then : + HAVE_ISDN_H=yes +else + HAVE_ISDN_H=no +fi + + +if test x$HAVE_ISDN_H = xyes ; then + +$as_echo "#define HAVE_ISDN_H 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for vmgetinfo in -lperfstat" >&5 +$as_echo_n "checking for vmgetinfo in -lperfstat... " >&6; } +if ${ac_cv_lib_perfstat_vmgetinfo+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lperfstat $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char vmgetinfo (); +int +main () +{ +return vmgetinfo (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_perfstat_vmgetinfo=yes +else + ac_cv_lib_perfstat_vmgetinfo=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_perfstat_vmgetinfo" >&5 +$as_echo "$ac_cv_lib_perfstat_vmgetinfo" >&6; } +if test "x$ac_cv_lib_perfstat_vmgetinfo" = xyes; then : + +$as_echo "#define HAVE_VMGETINFO 1" >>confdefs.h + +fi + + +case "$host_os" in + solaris*) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for kstat_open in -lkstat" >&5 +$as_echo_n "checking for kstat_open in -lkstat... " >&6; } +if ${ac_cv_lib_kstat_kstat_open+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lkstat $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char kstat_open (); +int +main () +{ +return kstat_open (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_kstat_kstat_open=yes +else + ac_cv_lib_kstat_kstat_open=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_kstat_kstat_open" >&5 +$as_echo "$ac_cv_lib_kstat_kstat_open" >&6; } +if test "x$ac_cv_lib_kstat_kstat_open" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBKSTAT 1 +_ACEOF + + LIBS="-lkstat $LIBS" + +fi + + for ac_func in getloadavg swapctl +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + for ac_header in procfs.h sys/procfs.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + break +fi + +done + + + + case $host_os in + solaris[8-9] | solaris2.[0-9].*) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for kvm_open in -lkvm" >&5 +$as_echo_n "checking for kvm_open in -lkvm... " >&6; } +if ${ac_cv_lib_kvm_kvm_open+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lkvm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char kvm_open (); +int +main () +{ +return kvm_open (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_kvm_kvm_open=yes +else + ac_cv_lib_kvm_kvm_open=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_kvm_kvm_open" >&5 +$as_echo "$ac_cv_lib_kvm_kvm_open" >&6; } +if test "x$ac_cv_lib_kvm_kvm_open" = xyes; then : + + LIBS="-lkvm $LIBS" + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for kvm_open in -lkvm with -lelf" >&5 +$as_echo_n "checking for kvm_open in -lkvm with -lelf... " >&6; } + if ${ac_cv_lib_kvm_with_elf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_LIBS="$LIBS" + LIBS="-lkvm -lelf $LIBS" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +char kvm_open(); +int +main () +{ +kvm_open() + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_kvm_with_elf=yes +else + ac_cv_lib_kvm_with_elf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$ac_save_LIBS" + +fi + + if test "$ac_cv_lib_kvm_with_elf" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + LIBS="-lkvm -lelf $LIBS" + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + +fi + + ;; + esac + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for vm_statistics in -lmach" >&5 +$as_echo_n "checking for vm_statistics in -lmach... " >&6; } +if ${ac_cv_lib_mach_vm_statistics+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lmach $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char vm_statistics (); +int +main () +{ +return vm_statistics (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_mach_vm_statistics=yes +else + ac_cv_lib_mach_vm_statistics=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mach_vm_statistics" >&5 +$as_echo "$ac_cv_lib_mach_vm_statistics" >&6; } +if test "x$ac_cv_lib_mach_vm_statistics" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBMACH 1 +_ACEOF + + LIBS="-lmach $LIBS" + +fi + + +saved_CFLAGS=$CFLAGS +CFLAGS="$CFLAGS -D_GNU_SOURCE" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether program_invocation_name must be declared" >&5 +$as_echo_n "checking whether program_invocation_name must be declared... " >&6; } +if ${gcc_cv_decl_needed_program_invocation_name+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#ifdef HAVE_STRING_H +#include +#else +#ifdef HAVE_STRINGS_H +#include +#endif +#endif +#ifdef HAVE_STDLIB_H +#include +#endif +#ifdef HAVE_UNISTD_H +#include +#endif + +#include +#include +#include +#include + +int +main () +{ +char *(*pfn) = (char *(*)) program_invocation_name + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "gcc_cv_decl_needed_program_invocation_name=no" +else + eval "gcc_cv_decl_needed_program_invocation_name=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +if eval "test \"`echo '$gcc_cv_decl_needed_'program_invocation_name`\" = yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + gcc_need_declarations="$gcc_need_declarations program_invocation_name" + gcc_tr_decl=NEED_DECLARATION_`echo program_invocation_name | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + +cat >>confdefs.h <<_ACEOF +#define $gcc_tr_decl 1 +_ACEOF + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +CFLAGS=$saved_CFLAGS + +ac_fn_c_check_func "$LINENO" "socket" "ac_cv_func_socket" +if test "x$ac_cv_func_socket" = xyes; then : + ac_fn_c_check_header_mongrel "$LINENO" "netinet/in.h" "ac_cv_header_netinet_in_h" "$ac_includes_default" +if test "x$ac_cv_header_netinet_in_h" = xyes; then : + ac_fn_c_check_header_mongrel "$LINENO" "arpa/inet.h" "ac_cv_header_arpa_inet_h" "$ac_includes_default" +if test "x$ac_cv_header_arpa_inet_h" = xyes; then : + + +$as_echo "#define HAVE_SOCKETS 1" >>confdefs.h + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking \"for sun_len member in struct sockaddr_un\"" >&5 +$as_echo_n "checking \"for sun_len member in struct sockaddr_un\"... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include +#include + +int +main () +{ +static struct sockaddr_un x; x.sun_len = 1; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; }; +$as_echo "#define HAVE_SOCKADDR_SUN_LEN 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi + + +fi + + +fi + + +# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works +# for constant arguments. Useless! +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5 +$as_echo_n "checking for working alloca.h... " >&6; } +if ${ac_cv_working_alloca_h+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +char *p = (char *) alloca (2 * sizeof (int)); + if (p) return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_working_alloca_h=yes +else + ac_cv_working_alloca_h=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5 +$as_echo "$ac_cv_working_alloca_h" >&6; } +if test $ac_cv_working_alloca_h = yes; then + +$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5 +$as_echo_n "checking for alloca... " >&6; } +if ${ac_cv_func_alloca_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __GNUC__ +# define alloca __builtin_alloca +#else +# ifdef _MSC_VER +# include +# define alloca _alloca +# else +# ifdef HAVE_ALLOCA_H +# include +# else +# ifdef _AIX + #pragma alloca +# else +# ifndef alloca /* predefined by HP cc +Olibcalls */ +void *alloca (size_t); +# endif +# endif +# endif +# endif +#endif + +int +main () +{ +char *p = (char *) alloca (1); + if (p) return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_func_alloca_works=yes +else + ac_cv_func_alloca_works=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5 +$as_echo "$ac_cv_func_alloca_works" >&6; } + +if test $ac_cv_func_alloca_works = yes; then + +$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h + +else + # The SVR3 libPW and SVR4 libucb both contain incompatible functions +# that cause trouble. Some versions do not even contain alloca or +# contain a buggy version. If you still want to use their alloca, +# use ar to extract alloca.o from them instead of compiling alloca.c. + +ALLOCA=\${LIBOBJDIR}alloca.$ac_objext + +$as_echo "#define C_ALLOCA 1" >>confdefs.h + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5 +$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; } +if ${ac_cv_os_cray+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#if defined CRAY && ! defined CRAY2 +webecray +#else +wenotbecray +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "webecray" >/dev/null 2>&1; then : + ac_cv_os_cray=yes +else + ac_cv_os_cray=no +fi +rm -f conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5 +$as_echo "$ac_cv_os_cray" >&6; } +if test $ac_cv_os_cray = yes; then + for ac_func in _getb67 GETB67 getb67; do + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + +cat >>confdefs.h <<_ACEOF +#define CRAY_STACKSEG_END $ac_func +_ACEOF + + break +fi + + done +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5 +$as_echo_n "checking stack direction for C alloca... " >&6; } +if ${ac_cv_c_stack_direction+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_c_stack_direction=0 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +find_stack_direction (int *addr, int depth) +{ + int dir, dummy = 0; + if (! addr) + addr = &dummy; + *addr = addr < &dummy ? 1 : addr == &dummy ? 0 : -1; + dir = depth ? find_stack_direction (addr, depth - 1) : 0; + return dir + dummy; +} + +int +main (int argc, char **argv) +{ + return find_stack_direction (0, argc + !argv + 20) < 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_c_stack_direction=1 +else + ac_cv_c_stack_direction=-1 +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5 +$as_echo "$ac_cv_c_stack_direction" >&6; } +cat >>confdefs.h <<_ACEOF +#define STACK_DIRECTION $ac_cv_c_stack_direction +_ACEOF + + +fi + + + + + for ac_header in $ac_header_list +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + + + + + +for ac_func in getpagesize +do : + ac_fn_c_check_func "$LINENO" "getpagesize" "ac_cv_func_getpagesize" +if test "x$ac_cv_func_getpagesize" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_GETPAGESIZE 1 +_ACEOF + +fi +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working mmap" >&5 +$as_echo_n "checking for working mmap... " >&6; } +if ${ac_cv_func_mmap_fixed_mapped+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_func_mmap_fixed_mapped=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +/* malloc might have been renamed as rpl_malloc. */ +#undef malloc + +/* Thanks to Mike Haertel and Jim Avera for this test. + Here is a matrix of mmap possibilities: + mmap private not fixed + mmap private fixed at somewhere currently unmapped + mmap private fixed at somewhere already mapped + mmap shared not fixed + mmap shared fixed at somewhere currently unmapped + mmap shared fixed at somewhere already mapped + For private mappings, we should verify that changes cannot be read() + back from the file, nor mmap's back from the file at a different + address. (There have been systems where private was not correctly + implemented like the infamous i386 svr4.0, and systems where the + VM page cache was not coherent with the file system buffer cache + like early versions of FreeBSD and possibly contemporary NetBSD.) + For shared mappings, we should conversely verify that changes get + propagated back to all the places they're supposed to be. + + Grep wants private fixed already mapped. + The main things grep needs to know about mmap are: + * does it exist and is it safe to write into the mmap'd area + * how to use it (BSD variants) */ + +#include +#include + +#if !defined STDC_HEADERS && !defined HAVE_STDLIB_H +char *malloc (); +#endif + +/* This mess was copied from the GNU getpagesize.h. */ +#ifndef HAVE_GETPAGESIZE +# ifdef _SC_PAGESIZE +# define getpagesize() sysconf(_SC_PAGESIZE) +# else /* no _SC_PAGESIZE */ +# ifdef HAVE_SYS_PARAM_H +# include +# ifdef EXEC_PAGESIZE +# define getpagesize() EXEC_PAGESIZE +# else /* no EXEC_PAGESIZE */ +# ifdef NBPG +# define getpagesize() NBPG * CLSIZE +# ifndef CLSIZE +# define CLSIZE 1 +# endif /* no CLSIZE */ +# else /* no NBPG */ +# ifdef NBPC +# define getpagesize() NBPC +# else /* no NBPC */ +# ifdef PAGESIZE +# define getpagesize() PAGESIZE +# endif /* PAGESIZE */ +# endif /* no NBPC */ +# endif /* no NBPG */ +# endif /* no EXEC_PAGESIZE */ +# else /* no HAVE_SYS_PARAM_H */ +# define getpagesize() 8192 /* punt totally */ +# endif /* no HAVE_SYS_PARAM_H */ +# endif /* no _SC_PAGESIZE */ + +#endif /* no HAVE_GETPAGESIZE */ + +int +main () +{ + char *data, *data2, *data3; + const char *cdata2; + int i, pagesize; + int fd, fd2; + + pagesize = getpagesize (); + + /* First, make a file with some known garbage in it. */ + data = (char *) malloc (pagesize); + if (!data) + return 1; + for (i = 0; i < pagesize; ++i) + *(data + i) = rand (); + umask (0); + fd = creat ("conftest.mmap", 0600); + if (fd < 0) + return 2; + if (write (fd, data, pagesize) != pagesize) + return 3; + close (fd); + + /* Next, check that the tail of a page is zero-filled. File must have + non-zero length, otherwise we risk SIGBUS for entire page. */ + fd2 = open ("conftest.txt", O_RDWR | O_CREAT | O_TRUNC, 0600); + if (fd2 < 0) + return 4; + cdata2 = ""; + if (write (fd2, cdata2, 1) != 1) + return 5; + data2 = (char *) mmap (0, pagesize, PROT_READ | PROT_WRITE, MAP_SHARED, fd2, 0L); + if (data2 == MAP_FAILED) + return 6; + for (i = 0; i < pagesize; ++i) + if (*(data2 + i)) + return 7; + close (fd2); + if (munmap (data2, pagesize)) + return 8; + + /* Next, try to mmap the file at a fixed address which already has + something else allocated at it. If we can, also make sure that + we see the same garbage. */ + fd = open ("conftest.mmap", O_RDWR); + if (fd < 0) + return 9; + if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_FIXED, fd, 0L)) + return 10; + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data2 + i)) + return 11; + + /* Finally, make sure that changes to the mapped area do not + percolate back to the file as seen by read(). (This is a bug on + some variants of i386 svr4.0.) */ + for (i = 0; i < pagesize; ++i) + *(data2 + i) = *(data2 + i) + 1; + data3 = (char *) malloc (pagesize); + if (!data3) + return 12; + if (read (fd, data3, pagesize) != pagesize) + return 13; + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data3 + i)) + return 14; + close (fd); + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_mmap_fixed_mapped=yes +else + ac_cv_func_mmap_fixed_mapped=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mmap_fixed_mapped" >&5 +$as_echo "$ac_cv_func_mmap_fixed_mapped" >&6; } +if test $ac_cv_func_mmap_fixed_mapped = yes; then + +$as_echo "#define HAVE_MMAP 1" >>confdefs.h + +fi +rm -f conftest.mmap conftest.txt + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5 +$as_echo_n "checking return type of signal handlers... " >&6; } +if ${ac_cv_type_signal+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include + +int +main () +{ +return *(signal (0, 0)) (0) == 1; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_type_signal=int +else + ac_cv_type_signal=void +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5 +$as_echo "$ac_cv_type_signal" >&6; } + +cat >>confdefs.h <<_ACEOF +#define RETSIGTYPE $ac_cv_type_signal +_ACEOF + + +for ac_func in strftime +do : + ac_fn_c_check_func "$LINENO" "strftime" "ac_cv_func_strftime" +if test "x$ac_cv_func_strftime" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_STRFTIME 1 +_ACEOF + +else + # strftime is in -lintl on SCO UNIX. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for strftime in -lintl" >&5 +$as_echo_n "checking for strftime in -lintl... " >&6; } +if ${ac_cv_lib_intl_strftime+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lintl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char strftime (); +int +main () +{ +return strftime (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_intl_strftime=yes +else + ac_cv_lib_intl_strftime=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_strftime" >&5 +$as_echo "$ac_cv_lib_intl_strftime" >&6; } +if test "x$ac_cv_lib_intl_strftime" = xyes; then : + $as_echo "#define HAVE_STRFTIME 1" >>confdefs.h + +LIBS="-lintl $LIBS" +fi + +fi +done + +for ac_func in getcwd gettimeofday getwd putenv strdup strtoul uname +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 +$as_echo_n "checking whether NLS is requested... " >&6; } + # Check whether --enable-nls was given. +if test "${enable_nls+set}" = set; then : + enableval=$enable_nls; USE_NLS=$enableval +else + USE_NLS=yes +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 +$as_echo "$USE_NLS" >&6; } + + + + + GETTEXT_MACRO_VERSION=0.19 + + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_MSGFMT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case "$MSGFMT" in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && + (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" + ;; +esac +fi +MSGFMT="$ac_cv_path_MSGFMT" +if test "$MSGFMT" != ":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 +$as_echo "$MSGFMT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + # Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_GMSGFMT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $GMSGFMT in + [\\/]* | ?:[\\/]*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; +esac +fi +GMSGFMT=$ac_cv_path_GMSGFMT +if test -n "$GMSGFMT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 +$as_echo "$GMSGFMT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; + *) MSGFMT_015=$MSGFMT ;; + esac + + case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; + *) GMSGFMT_015=$GMSGFMT ;; + esac + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_XGETTEXT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case "$XGETTEXT" in + [\\/]* | ?:[\\/]*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && + (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" + ;; +esac +fi +XGETTEXT="$ac_cv_path_XGETTEXT" +if test "$XGETTEXT" != ":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 +$as_echo "$XGETTEXT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + rm -f messages.po + + case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; + *) XGETTEXT_015=$XGETTEXT ;; + esac + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "msgmerge", so it can be a program name with args. +set dummy msgmerge; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_MSGMERGE+:} false; then : + $as_echo_n "(cached) " >&6 +else + case "$MSGMERGE" in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then + ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" + ;; +esac +fi +MSGMERGE="$ac_cv_path_MSGMERGE" +if test "$MSGMERGE" != ":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 +$as_echo "$MSGMERGE" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$localedir" || localedir='${datadir}/locale' + + + test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= + + + ac_config_commands="$ac_config_commands po-directories" + + + + if test "X$prefix" = "XNONE"; then + acl_final_prefix="$ac_default_prefix" + else + acl_final_prefix="$prefix" + fi + if test "X$exec_prefix" = "XNONE"; then + acl_final_exec_prefix='${prefix}' + else + acl_final_exec_prefix="$exec_prefix" + fi + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" + prefix="$acl_save_prefix" + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'` + while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${acl_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$acl_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + acl_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$acl_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${acl_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$acl_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$acl_cv_prog_gnu_ld + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5 +$as_echo_n "checking for shared library run path origin... " >&6; } +if ${acl_cv_rpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + + CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ + ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh + . ./conftest.sh + rm -f ./conftest.sh + acl_cv_rpath=done + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5 +$as_echo "$acl_cv_rpath" >&6; } + wl="$acl_cv_wl" + acl_libext="$acl_cv_libext" + acl_shlibext="$acl_cv_shlibext" + acl_libname_spec="$acl_cv_libname_spec" + acl_library_names_spec="$acl_cv_library_names_spec" + acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + acl_hardcode_direct="$acl_cv_hardcode_direct" + acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" + # Check whether --enable-rpath was given. +if test "${enable_rpath+set}" = set; then : + enableval=$enable_rpath; : +else + enable_rpath=yes +fi + + + + + acl_libdirstem=lib + acl_libdirstem2= + case "$host_os" in + solaris*) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5 +$as_echo_n "checking for 64-bit host... " >&6; } +if ${gl_cv_solaris_64bit+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef _LP64 +sixtyfour bits +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "sixtyfour bits" >/dev/null 2>&1; then : + gl_cv_solaris_64bit=yes +else + gl_cv_solaris_64bit=no +fi +rm -f conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5 +$as_echo "$gl_cv_solaris_64bit" >&6; } + if test $gl_cv_solaris_64bit = yes; then + acl_libdirstem=lib/64 + case "$host_cpu" in + sparc*) acl_libdirstem2=lib/sparcv9 ;; + i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; + esac + fi + ;; + *) + searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` + if test -n "$searchpath"; then + acl_save_IFS="${IFS= }"; IFS=":" + for searchdir in $searchpath; do + if test -d "$searchdir"; then + case "$searchdir" in + */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; + */../ | */.. ) + # Better ignore directories of this form. They are misleading. + ;; + *) searchdir=`cd "$searchdir" && pwd` + case "$searchdir" in + */lib64 ) acl_libdirstem=lib64 ;; + esac ;; + esac + fi + done + IFS="$acl_save_IFS" + fi + ;; + esac + test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" + + + + + + + + + + + + + use_additional=yes + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + +# Check whether --with-libiconv-prefix was given. +if test "${with_libiconv_prefix+set}" = set; then : + withval=$with_libiconv_prefix; + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + if test "$acl_libdirstem2" != "$acl_libdirstem" \ + && ! test -d "$withval/$acl_libdirstem"; then + additional_libdir="$withval/$acl_libdirstem2" + fi + fi + fi + +fi + + LIBICONV= + LTLIBICONV= + INCICONV= + LIBICONV_PREFIX= + HAVE_LIBICONV= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='iconv ' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" + else + : + fi + else + found_dir= + found_la= + found_so= + found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi + if test $use_additional = yes; then + dir="$additional_libdir" + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + if test "$acl_hardcode_direct" = yes; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + haveit= + for x in $LDFLAGS $LIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" + fi + if test "$acl_hardcode_minus_L" != no; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" + fi + fi + additional_includedir= + case "$found_dir" in + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = 'iconv'; then + LIBICONV_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = 'iconv'; then + LIBICONV_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INCICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + if test -n "$found_la"; then + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" + ;; + esac + done + fi + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$acl_hardcode_libdir_separator"; then + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" + else + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + for found_dir in $ltrpathdirs; do + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" + done + fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5 +$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; } +if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then : + $as_echo_n "(cached) " >&6 +else + gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +CFPreferencesCopyAppValue(NULL, NULL) + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + gt_cv_func_CFPreferencesCopyAppValue=yes +else + gt_cv_func_CFPreferencesCopyAppValue=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$gt_save_LIBS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 +$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; } + if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then + +$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h + + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5 +$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; } +if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then : + $as_echo_n "(cached) " >&6 +else + gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +CFLocaleCopyCurrent(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + gt_cv_func_CFLocaleCopyCurrent=yes +else + gt_cv_func_CFLocaleCopyCurrent=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$gt_save_LIBS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5 +$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; } + if test $gt_cv_func_CFLocaleCopyCurrent = yes; then + +$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h + + fi + INTL_MACOSX_LIBS= + if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then + INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" + fi + + + + + + + LIBINTL= + LTLIBINTL= + POSUB= + + case " $gt_needs " in + *" need-formatstring-macros "*) gt_api_version=3 ;; + *" need-ngettext "*) gt_api_version=2 ;; + *) gt_api_version=1 ;; + esac + gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" + gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" + + if test "$USE_NLS" = "yes"; then + gt_use_preinstalled_gnugettext=no + + + if test $gt_api_version -ge 3; then + gt_revision_test_code=' +#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +' + else + gt_revision_test_code= + fi + if test $gt_api_version -ge 2; then + gt_expression_test_code=' + * ngettext ("", "", 0)' + else + gt_expression_test_code= + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5 +$as_echo_n "checking for GNU gettext in libc... " >&6; } +if eval \${$gt_func_gnugettext_libc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern int *_nl_domain_bindings; + +int +main () +{ + +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$gt_func_gnugettext_libc=yes" +else + eval "$gt_func_gnugettext_libc=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$gt_func_gnugettext_libc + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + + if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then + + + + + + am_save_CPPFLAGS="$CPPFLAGS" + + for element in $INCICONV; do + haveit= + for x in $CPPFLAGS; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" + fi + done + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5 +$as_echo_n "checking for iconv... " >&6; } +if ${am_cv_func_iconv+:} false; then : + $as_echo_n "(cached) " >&6 +else + + am_cv_func_iconv="no, consider installing GNU libiconv" + am_cv_lib_iconv=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main () +{ +iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + am_cv_func_iconv=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test "$am_cv_func_iconv" != yes; then + am_save_LIBS="$LIBS" + LIBS="$LIBS $LIBICONV" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main () +{ +iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + am_cv_lib_iconv=yes + am_cv_func_iconv=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$am_save_LIBS" + fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5 +$as_echo "$am_cv_func_iconv" >&6; } + if test "$am_cv_func_iconv" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5 +$as_echo_n "checking for working iconv... " >&6; } +if ${am_cv_func_iconv_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + + am_save_LIBS="$LIBS" + if test $am_cv_lib_iconv = yes; then + LIBS="$LIBS $LIBICONV" + fi + am_cv_func_iconv_works=no + for ac_iconv_const in '' 'const'; do + if test "$cross_compiling" = yes; then : + case "$host_os" in + aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; + *) am_cv_func_iconv_works="guessing yes" ;; + esac +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +#ifndef ICONV_CONST +# define ICONV_CONST $ac_iconv_const +#endif + +int +main () +{ +int result = 0; + /* Test against AIX 5.1 bug: Failures are not distinguishable from successful + returns. */ + { + iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); + if (cd_utf8_to_88591 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ + char buf[10]; + ICONV_CONST char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_utf8_to_88591, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + result |= 1; + iconv_close (cd_utf8_to_88591); + } + } + /* Test against Solaris 10 bug: Failures are not distinguishable from + successful returns. */ + { + iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); + if (cd_ascii_to_88591 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\263"; + char buf[10]; + ICONV_CONST char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_ascii_to_88591, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + result |= 2; + iconv_close (cd_ascii_to_88591); + } + } + /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ + { + iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); + if (cd_88591_to_utf8 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\304"; + static char buf[2] = { (char)0xDE, (char)0xAD }; + ICONV_CONST char *inptr = input; + size_t inbytesleft = 1; + char *outptr = buf; + size_t outbytesleft = 1; + size_t res = iconv (cd_88591_to_utf8, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) + result |= 4; + iconv_close (cd_88591_to_utf8); + } + } +#if 0 /* This bug could be worked around by the caller. */ + /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ + { + iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); + if (cd_88591_to_utf8 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; + char buf[50]; + ICONV_CONST char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_88591_to_utf8, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if ((int)res > 0) + result |= 8; + iconv_close (cd_88591_to_utf8); + } + } +#endif + /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is + provided. */ + if (/* Try standardized names. */ + iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) + /* Try IRIX, OSF/1 names. */ + && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) + /* Try AIX names. */ + && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) + /* Try HP-UX names. */ + && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) + result |= 16; + return result; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + am_cv_func_iconv_works=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + test "$am_cv_func_iconv_works" = no || break + done + LIBS="$am_save_LIBS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5 +$as_echo "$am_cv_func_iconv_works" >&6; } + case "$am_cv_func_iconv_works" in + *no) am_func_iconv=no am_cv_lib_iconv=no ;; + *) am_func_iconv=yes ;; + esac + else + am_func_iconv=no am_cv_lib_iconv=no + fi + if test "$am_func_iconv" = yes; then + +$as_echo "#define HAVE_ICONV 1" >>confdefs.h + + fi + if test "$am_cv_lib_iconv" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5 +$as_echo_n "checking how to link with libiconv... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5 +$as_echo "$LIBICONV" >&6; } + else + CPPFLAGS="$am_save_CPPFLAGS" + LIBICONV= + LTLIBICONV= + fi + + + + + + + + + + + + use_additional=yes + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + +# Check whether --with-libintl-prefix was given. +if test "${with_libintl_prefix+set}" = set; then : + withval=$with_libintl_prefix; + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + if test "$acl_libdirstem2" != "$acl_libdirstem" \ + && ! test -d "$withval/$acl_libdirstem"; then + additional_libdir="$withval/$acl_libdirstem2" + fi + fi + fi + +fi + + LIBINTL= + LTLIBINTL= + INCINTL= + LIBINTL_PREFIX= + HAVE_LIBINTL= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='intl ' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" + else + : + fi + else + found_dir= + found_la= + found_so= + found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi + if test $use_additional = yes; then + dir="$additional_libdir" + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + if test "$acl_hardcode_direct" = yes; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + haveit= + for x in $LDFLAGS $LIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" + fi + if test "$acl_hardcode_minus_L" != no; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" + fi + fi + additional_includedir= + case "$found_dir" in + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = 'intl'; then + LIBINTL_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = 'intl'; then + LIBINTL_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INCINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + if test -n "$found_la"; then + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" + ;; + esac + done + fi + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$acl_hardcode_libdir_separator"; then + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" + else + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + for found_dir in $ltrpathdirs; do + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" + done + fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5 +$as_echo_n "checking for GNU gettext in libintl... " >&6; } +if eval \${$gt_func_gnugettext_libintl+:} false; then : + $as_echo_n "(cached) " >&6 +else + gt_save_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $INCINTL" + gt_save_LIBS="$LIBS" + LIBS="$LIBS $LIBINTL" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (const char *); + +int +main () +{ + +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$gt_func_gnugettext_libintl=yes" +else + eval "$gt_func_gnugettext_libintl=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if { eval "gt_val=\$$gt_func_gnugettext_libin