From fc043ff097184c889755a3281ce3ec783e7d42df Mon Sep 17 00:00:00 2001 From: Packit Date: Sep 14 2020 12:04:02 +0000 Subject: libgpg-error-1.31 base --- diff --git a/ABOUT-NLS b/ABOUT-NLS new file mode 100644 index 0000000..3b879cb --- /dev/null +++ b/ABOUT-NLS @@ -0,0 +1,1282 @@ +1 Notes on the Free Translation Project +*************************************** + +Free software is going international! The Free Translation Project is +a way to get maintainers of free software, translators, and users all +together, so that free software will gradually become able to speak many +languages. A few packages already provide translations for their +messages. + + If you found this `ABOUT-NLS' file inside a distribution, you may +assume that the distributed package does use GNU `gettext' internally, +itself available at your nearest GNU archive site. But you do _not_ +need to install GNU `gettext' prior to configuring, installing or using +this package with messages translated. + + Installers will find here some useful hints. These notes also +explain how users should proceed for getting the programs to use the +available translations. They tell how people wanting to contribute and +work on translations can contact the appropriate team. + +1.1 INSTALL Matters +=================== + +Some packages are "localizable" when properly installed; the programs +they contain can be made to speak your own native language. Most such +packages use GNU `gettext'. Other packages have their own ways to +internationalization, predating GNU `gettext'. + + By default, this package will be installed to allow translation of +messages. It will automatically detect whether the system already +provides the GNU `gettext' functions. Installers may use special +options at configuration time for changing the default behaviour. The +command: + + ./configure --disable-nls + +will _totally_ disable translation of messages. + + When you already have GNU `gettext' installed on your system and run +configure without an option for your new package, `configure' will +probably detect the previously built and installed `libintl' library +and will decide to use it. If not, you may have to to use the +`--with-libintl-prefix' option to tell `configure' where to look for it. + + Internationalized packages usually have many `po/LL.po' files, where +LL gives an ISO 639 two-letter code identifying the language. Unless +translations have been forbidden at `configure' time by using the +`--disable-nls' switch, all available translations are installed +together with the package. However, the environment variable `LINGUAS' +may be set, prior to configuration, to limit the installed set. +`LINGUAS' should then contain a space separated list of two-letter +codes, stating which languages are allowed. + +1.2 Using This Package +====================== + +As a user, if your language has been installed for this package, you +only have to set the `LANG' environment variable to the appropriate +`LL_CC' combination. If you happen to have the `LC_ALL' or some other +`LC_xxx' environment variables set, you should unset them before +setting `LANG', otherwise the setting of `LANG' will not have the +desired effect. Here `LL' is an ISO 639 two-letter language code, and +`CC' is an ISO 3166 two-letter country code. For example, let's +suppose that you speak German and live in Germany. At the shell +prompt, merely execute `setenv LANG de_DE' (in `csh'), +`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash'). +This can be done from your `.login' or `.profile' file, once and for +all. + + You might think that the country code specification is redundant. +But in fact, some languages have dialects in different countries. For +example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The +country code serves to distinguish the dialects. + + The locale naming convention of `LL_CC', with `LL' denoting the +language and `CC' denoting the country, is the one use on systems based +on GNU libc. On other systems, some variations of this scheme are +used, such as `LL' or `LL_CC.ENCODING'. You can get the list of +locales supported by your system for your language by running the +command `locale -a | grep '^LL''. + + Not all programs have translations for all languages. By default, an +English message is shown in place of a nonexistent translation. If you +understand other languages, you can set up a priority list of languages. +This is done through a different environment variable, called +`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG' +for the purpose of message handling, but you still need to have `LANG' +set to the primary language; this is required by other parts of the +system libraries. For example, some Swedish users who would rather +read translations in German than English for when Swedish is not +available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'. + + Special advice for Norwegian users: The language code for Norwegian +bokma*l changed from `no' to `nb' recently (in 2003). During the +transition period, while some message catalogs for this language are +installed under `nb' and some older ones under `no', it's recommended +for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and +older translations are used. + + In the `LANGUAGE' environment variable, but not in the `LANG' +environment variable, `LL_CC' combinations can be abbreviated as `LL' +to denote the language's main dialect. For example, `de' is equivalent +to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT' +(Portuguese as spoken in Portugal) in this context. + +1.3 Translating Teams +===================== + +For the Free Translation Project to be a success, we need interested +people who like their own language and write it well, and who are also +able to synergize with other translators speaking the same language. +Each translation team has its own mailing list. The up-to-date list of +teams can be found at the Free Translation Project's homepage, +`https://translationproject.org/', in the "Teams" area. + + If you'd like to volunteer to _work_ at translating messages, you +should become a member of the translating team for your own language. +The subscribing address is _not_ the same as the list itself, it has +`-request' appended. For example, speakers of Swedish can send a +message to `sv-request@li.org', having this message body: + + subscribe + + Keep in mind that team members are expected to participate +_actively_ in translations, or at solving translational difficulties, +rather than merely lurking around. If your team does not exist yet and +you want to start one, or if you are unsure about what to do or how to +get started, please write to `coordinator@translationproject.org' to +reach the coordinator for all translator teams. + + The English team is special. It works at improving and uniformizing +the terminology in use. Proven linguistic skills are praised more than +programming skills, here. + +1.4 Available Packages +====================== + +Languages are not equally supported in all packages. The following +matrix shows the current state of internationalization, as of June +2010. The matrix shows, in regard of each package, for which languages +PO files have been submitted to translation coordination, with a +translation percentage of at least 50%. + + Ready PO files af am an ar as ast az be be@latin bg bn_IN bs ca + +--------------------------------------------------+ + a2ps | [] [] | + aegis | | + ant-phone | | + anubis | | + aspell | [] [] | + bash | | + bfd | | + bibshelf | [] | + binutils | | + bison | | + bison-runtime | [] | + bluez-pin | [] [] | + bombono-dvd | | + buzztard | | + cflow | | + clisp | | + coreutils | [] [] | + cpio | | + cppi | | + cpplib | [] | + cryptsetup | | + dfarc | | + dialog | [] [] | + dico | | + diffutils | [] | + dink | | + doodle | | + e2fsprogs | [] | + enscript | [] | + exif | | + fetchmail | [] | + findutils | [] | + flex | [] | + freedink | | + gas | | + gawk | [] [] | + gcal | [] | + gcc | | + gettext-examples | [] [] [] [] | + gettext-runtime | [] [] | + gettext-tools | [] [] | + gip | [] | + gjay | | + gliv | [] | + glunarclock | [] [] | + gnubiff | | + gnucash | [] | + gnuedu | | + gnulib | | + gnunet | | + gnunet-gtk | | + gnutls | | + gold | | + gpe-aerial | | + gpe-beam | | + gpe-bluetooth | | + gpe-calendar | | + gpe-clock | [] | + gpe-conf | | + gpe-contacts | | + gpe-edit | | + gpe-filemanager | | + gpe-go | | + gpe-login | | + gpe-ownerinfo | [] | + gpe-package | | + gpe-sketchbook | | + gpe-su | [] | + gpe-taskmanager | [] | + gpe-timesheet | [] | + gpe-today | [] | + gpe-todo | | + gphoto2 | | + gprof | [] | + gpsdrive | | + gramadoir | | + grep | | + grub | [] [] | + gsasl | | + gss | | + gst-plugins-bad | [] | + gst-plugins-base | [] | + gst-plugins-good | [] | + gst-plugins-ugly | [] | + gstreamer | [] [] [] | + gtick | | + gtkam | [] | + gtkorphan | [] | + gtkspell | [] [] [] | + gutenprint | | + hello | [] | + help2man | | + hylafax | | + idutils | | + indent | [] [] | + iso_15924 | | + iso_3166 | [] [] [] [] [] [] [] | + iso_3166_2 | | + iso_4217 | | + iso_639 | [] [] [] [] | + iso_639_3 | | + jwhois | | + kbd | | + keytouch | [] | + keytouch-editor | | + keytouch-keyboa... | [] | + klavaro | [] | + latrine | | + ld | [] | + leafpad | [] [] | + libc | [] [] | + libexif | () | + libextractor | | + libgnutls | | + libgpewidget | | + libgpg-error | | + libgphoto2 | | + libgphoto2_port | | + libgsasl | | + libiconv | [] | + libidn | | + lifelines | | + liferea | [] [] | + lilypond | | + linkdr | [] | + lordsawar | | + lprng | | + lynx | [] | + m4 | | + mailfromd | | + mailutils | | + make | | + man-db | | + man-db-manpages | | + minicom | | + mkisofs | | + myserver | | + nano | [] [] | + opcodes | | + parted | | + pies | | + popt | | + psmisc | | + pspp | [] | + pwdutils | | + radius | [] | + recode | [] [] | + rosegarden | | + rpm | | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] [] | + sed | [] [] | + sharutils | [] [] | + shishi | | + skencil | | + solfege | | + solfege-manual | | + soundtracker | | + sp | | + sysstat | | + tar | [] | + texinfo | | + tin | | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] | + vice | | + vmm | | + vorbis-tools | | + wastesedge | | + wdiff | | + wget | [] [] | + wyslij-po | | + xchat | [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] | + +--------------------------------------------------+ + af am an ar as ast az be be@latin bg bn_IN bs ca + 6 0 1 2 3 19 1 10 3 28 3 1 38 + + crh cs da de el en en_GB en_ZA eo es et eu fa + +-------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] | + aegis | [] [] [] | + ant-phone | [] () | + anubis | [] [] | + aspell | [] [] [] [] [] | + bash | [] [] [] | + bfd | [] | + bibshelf | [] [] [] | + binutils | [] | + bison | [] [] | + bison-runtime | [] [] [] [] | + bluez-pin | [] [] [] [] [] [] | + bombono-dvd | [] | + buzztard | [] [] [] | + cflow | [] [] | + clisp | [] [] [] [] | + coreutils | [] [] [] [] | + cpio | | + cppi | | + cpplib | [] [] [] | + cryptsetup | [] | + dfarc | [] [] [] | + dialog | [] [] [] [] [] | + dico | | + diffutils | [] [] [] [] [] [] | + dink | [] [] [] | + doodle | [] | + e2fsprogs | [] [] [] | + enscript | [] [] [] | + exif | () [] [] | + fetchmail | [] [] () [] [] [] | + findutils | [] [] [] | + flex | [] [] | + freedink | [] [] [] | + gas | [] | + gawk | [] [] [] | + gcal | [] | + gcc | [] [] | + gettext-examples | [] [] [] [] | + gettext-runtime | [] [] [] [] | + gettext-tools | [] [] [] | + gip | [] [] [] [] | + gjay | [] | + gliv | [] [] [] | + glunarclock | [] [] | + gnubiff | () | + gnucash | [] () () () () | + gnuedu | [] [] | + gnulib | [] [] | + gnunet | | + gnunet-gtk | [] | + gnutls | [] [] | + gold | [] | + gpe-aerial | [] [] [] [] | + gpe-beam | [] [] [] [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] | + gpe-clock | [] [] [] [] | + gpe-conf | [] [] [] | + gpe-contacts | [] [] [] | + gpe-edit | [] [] | + gpe-filemanager | [] [] [] | + gpe-go | [] [] [] [] | + gpe-login | [] [] | + gpe-ownerinfo | [] [] [] [] | + gpe-package | [] [] [] | + gpe-sketchbook | [] [] [] [] | + gpe-su | [] [] [] [] | + gpe-taskmanager | [] [] [] [] | + gpe-timesheet | [] [] [] [] | + gpe-today | [] [] [] [] | + gpe-todo | [] [] [] | + gphoto2 | [] [] () [] [] [] | + gprof | [] [] [] | + gpsdrive | [] [] [] | + gramadoir | [] [] [] | + grep | [] | + grub | [] [] | + gsasl | [] | + gss | | + gst-plugins-bad | [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] () [] | + gtkam | [] [] () [] [] | + gtkorphan | [] [] [] [] | + gtkspell | [] [] [] [] [] [] [] | + gutenprint | [] [] [] | + hello | [] [] [] [] | + help2man | [] | + hylafax | [] [] | + idutils | [] [] | + indent | [] [] [] [] [] [] [] | + iso_15924 | [] () [] [] | + iso_3166 | [] [] [] [] () [] [] [] () | + iso_3166_2 | () | + iso_4217 | [] [] [] () [] [] | + iso_639 | [] [] [] [] () [] [] | + iso_639_3 | [] | + jwhois | [] | + kbd | [] [] [] [] [] | + keytouch | [] [] | + keytouch-editor | [] [] | + keytouch-keyboa... | [] | + klavaro | [] [] [] [] | + latrine | [] () | + ld | [] [] | + leafpad | [] [] [] [] [] [] | + libc | [] [] [] [] | + libexif | [] [] () | + libextractor | | + libgnutls | [] | + libgpewidget | [] [] | + libgpg-error | [] [] | + libgphoto2 | [] () | + libgphoto2_port | [] () [] | + libgsasl | | + libiconv | [] [] [] [] [] | + libidn | [] [] [] | + lifelines | [] () | + liferea | [] [] [] [] [] | + lilypond | [] [] [] | + linkdr | [] [] [] | + lordsawar | [] | + lprng | | + lynx | [] [] [] [] | + m4 | [] [] [] [] | + mailfromd | | + mailutils | [] | + make | [] [] [] | + man-db | | + man-db-manpages | | + minicom | [] [] [] [] | + mkisofs | | + myserver | | + nano | [] [] [] | + opcodes | [] [] | + parted | [] [] | + pies | | + popt | [] [] [] [] [] | + psmisc | [] [] [] | + pspp | [] | + pwdutils | [] | + radius | [] | + recode | [] [] [] [] [] [] | + rosegarden | () () () | + rpm | [] [] [] | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] [] [] [] | + sed | [] [] [] [] [] [] | + sharutils | [] [] [] [] | + shishi | | + skencil | [] () [] | + solfege | [] [] [] | + solfege-manual | [] [] | + soundtracker | [] [] [] | + sp | [] | + sysstat | [] [] [] | + tar | [] [] [] [] | + texinfo | [] [] [] | + tin | [] [] | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] [] [] [] | + vice | () () | + vmm | [] | + vorbis-tools | [] [] | + wastesedge | [] | + wdiff | [] [] | + wget | [] [] [] | + wyslij-po | | + xchat | [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] [] | + +-------------------------------------------------+ + crh cs da de el en en_GB en_ZA eo es et eu fa + 5 64 105 117 18 1 8 0 28 89 18 19 0 + + fi fr ga gl gu he hi hr hu hy id is it ja ka kn + +----------------------------------------------------+ + a2ps | [] [] [] [] | + aegis | [] [] | + ant-phone | [] [] | + anubis | [] [] [] [] | + aspell | [] [] [] [] | + bash | [] [] [] [] | + bfd | [] [] [] | + bibshelf | [] [] [] [] [] | + binutils | [] [] [] | + bison | [] [] [] [] | + bison-runtime | [] [] [] [] [] [] | + bluez-pin | [] [] [] [] [] [] [] [] | + bombono-dvd | [] | + buzztard | [] | + cflow | [] [] [] | + clisp | [] | + coreutils | [] [] [] [] [] | + cpio | [] [] [] [] | + cppi | [] [] | + cpplib | [] [] [] | + cryptsetup | [] [] [] | + dfarc | [] [] [] | + dialog | [] [] [] [] [] [] [] | + dico | | + diffutils | [] [] [] [] [] [] [] [] [] | + dink | [] | + doodle | [] [] | + e2fsprogs | [] [] | + enscript | [] [] [] [] | + exif | [] [] [] [] [] [] | + fetchmail | [] [] [] [] | + findutils | [] [] [] [] [] [] | + flex | [] [] [] | + freedink | [] [] [] | + gas | [] [] | + gawk | [] [] [] [] () [] | + gcal | [] | + gcc | [] | + gettext-examples | [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] | + gettext-tools | [] [] [] [] | + gip | [] [] [] [] [] [] | + gjay | [] | + gliv | [] () | + glunarclock | [] [] [] [] | + gnubiff | () [] () | + gnucash | () () () () () [] | + gnuedu | [] [] | + gnulib | [] [] [] [] [] [] | + gnunet | | + gnunet-gtk | [] | + gnutls | [] [] | + gold | [] [] | + gpe-aerial | [] [] [] | + gpe-beam | [] [] [] [] | + gpe-bluetooth | [] [] [] [] | + gpe-calendar | [] [] | + gpe-clock | [] [] [] [] [] | + gpe-conf | [] [] [] [] | + gpe-contacts | [] [] [] [] | + gpe-edit | [] [] [] | + gpe-filemanager | [] [] [] [] | + gpe-go | [] [] [] [] [] | + gpe-login | [] [] [] | + gpe-ownerinfo | [] [] [] [] [] | + gpe-package | [] [] [] | + gpe-sketchbook | [] [] [] [] | + gpe-su | [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] | + gpe-timesheet | [] [] [] [] [] | + gpe-today | [] [] [] [] [] [] [] | + gpe-todo | [] [] [] | + gphoto2 | [] [] [] [] [] [] | + gprof | [] [] [] [] | + gpsdrive | [] [] [] | + gramadoir | [] [] [] | + grep | [] [] | + grub | [] [] [] [] | + gsasl | [] [] [] [] [] | + gss | [] [] [] [] [] | + gst-plugins-bad | [] [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] [] [] [] [] | + gtkam | [] [] [] [] [] | + gtkorphan | [] [] [] | + gtkspell | [] [] [] [] [] [] [] [] [] | + gutenprint | [] [] [] [] | + hello | [] [] [] | + help2man | [] [] | + hylafax | [] | + idutils | [] [] [] [] [] [] | + indent | [] [] [] [] [] [] [] [] | + iso_15924 | [] () [] [] | + iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] | + iso_3166_2 | () [] [] [] | + iso_4217 | [] () [] [] [] [] | + iso_639 | [] () [] [] [] [] [] [] [] | + iso_639_3 | () [] [] | + jwhois | [] [] [] [] [] | + kbd | [] [] | + keytouch | [] [] [] [] [] [] | + keytouch-editor | [] [] [] [] [] | + keytouch-keyboa... | [] [] [] [] [] | + klavaro | [] [] | + latrine | [] [] [] | + ld | [] [] [] [] | + leafpad | [] [] [] [] [] [] [] () | + libc | [] [] [] [] [] | + libexif | [] | + libextractor | | + libgnutls | [] [] | + libgpewidget | [] [] [] [] | + libgpg-error | [] [] | + libgphoto2 | [] [] [] | + libgphoto2_port | [] [] [] | + libgsasl | [] [] [] [] [] | + libiconv | [] [] [] [] [] [] | + libidn | [] [] [] [] | + lifelines | () | + liferea | [] [] [] [] | + lilypond | [] [] | + linkdr | [] [] [] [] [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] [] [] | + m4 | [] [] [] [] [] [] | + mailfromd | | + mailutils | [] [] | + make | [] [] [] [] [] [] [] [] [] | + man-db | [] [] | + man-db-manpages | [] | + minicom | [] [] [] [] [] | + mkisofs | [] [] [] [] | + myserver | | + nano | [] [] [] [] [] [] | + opcodes | [] [] [] [] | + parted | [] [] [] [] | + pies | | + popt | [] [] [] [] [] [] [] [] [] | + psmisc | [] [] [] | + pspp | | + pwdutils | [] [] | + radius | [] [] | + recode | [] [] [] [] [] [] [] [] | + rosegarden | () () () () () | + rpm | [] [] | + rush | | + sarg | [] | + screem | [] [] | + scrollkeeper | [] [] [] [] | + sed | [] [] [] [] [] [] [] [] | + sharutils | [] [] [] [] [] [] [] | + shishi | [] | + skencil | [] | + solfege | [] [] [] [] | + solfege-manual | [] [] | + soundtracker | [] [] | + sp | [] () | + sysstat | [] [] [] [] [] | + tar | [] [] [] [] [] [] [] | + texinfo | [] [] [] [] | + tin | [] | + unicode-han-tra... | | + unicode-transla... | [] [] | + util-linux-ng | [] [] [] [] [] [] | + vice | () () () | + vmm | [] | + vorbis-tools | [] | + wastesedge | () () | + wdiff | [] | + wget | [] [] [] [] [] [] [] [] | + wyslij-po | [] [] [] | + xchat | [] [] [] [] [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] | + +----------------------------------------------------+ + fi fr ga gl gu he hi hr hu hy id is it ja ka kn + 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4 + + ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne + +-----------------------------------------------+ + a2ps | [] | + aegis | | + ant-phone | | + anubis | [] [] | + aspell | [] | + bash | | + bfd | | + bibshelf | [] [] | + binutils | | + bison | [] | + bison-runtime | [] [] [] [] [] | + bluez-pin | [] [] [] [] [] | + bombono-dvd | | + buzztard | | + cflow | | + clisp | | + coreutils | [] | + cpio | | + cppi | | + cpplib | | + cryptsetup | | + dfarc | [] | + dialog | [] [] [] [] [] | + dico | | + diffutils | [] [] | + dink | | + doodle | | + e2fsprogs | | + enscript | | + exif | [] | + fetchmail | | + findutils | | + flex | | + freedink | [] | + gas | | + gawk | | + gcal | | + gcc | | + gettext-examples | [] [] [] [] | + gettext-runtime | [] | + gettext-tools | [] | + gip | [] [] | + gjay | | + gliv | | + glunarclock | [] | + gnubiff | | + gnucash | () () () () | + gnuedu | | + gnulib | | + gnunet | | + gnunet-gtk | | + gnutls | [] | + gold | | + gpe-aerial | [] | + gpe-beam | [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] | + gpe-clock | [] [] [] [] [] | + gpe-conf | [] [] | + gpe-contacts | [] [] | + gpe-edit | [] | + gpe-filemanager | [] [] | + gpe-go | [] [] [] | + gpe-login | [] | + gpe-ownerinfo | [] [] | + gpe-package | [] [] | + gpe-sketchbook | [] [] | + gpe-su | [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] [] | + gpe-timesheet | [] [] | + gpe-today | [] [] [] [] | + gpe-todo | [] [] | + gphoto2 | | + gprof | [] | + gpsdrive | | + gramadoir | | + grep | | + grub | | + gsasl | | + gss | | + gst-plugins-bad | [] [] [] [] | + gst-plugins-base | [] [] | + gst-plugins-good | [] [] | + gst-plugins-ugly | [] [] [] [] [] | + gstreamer | | + gtick | | + gtkam | [] | + gtkorphan | [] [] | + gtkspell | [] [] [] [] [] [] [] | + gutenprint | | + hello | [] [] [] | + help2man | | + hylafax | | + idutils | | + indent | | + iso_15924 | [] [] | + iso_3166 | [] [] () [] [] [] [] [] | + iso_3166_2 | | + iso_4217 | [] [] | + iso_639 | [] [] | + iso_639_3 | [] | + jwhois | [] | + kbd | | + keytouch | [] | + keytouch-editor | [] | + keytouch-keyboa... | [] | + klavaro | [] | + latrine | [] | + ld | | + leafpad | [] [] [] | + libc | [] | + libexif | | + libextractor | | + libgnutls | [] | + libgpewidget | [] [] | + libgpg-error | | + libgphoto2 | | + libgphoto2_port | | + libgsasl | | + libiconv | | + libidn | | + lifelines | | + liferea | | + lilypond | | + linkdr | | + lordsawar | | + lprng | | + lynx | | + m4 | | + mailfromd | | + mailutils | | + make | [] | + man-db | | + man-db-manpages | | + minicom | [] | + mkisofs | | + myserver | | + nano | [] [] | + opcodes | | + parted | | + pies | | + popt | [] [] [] | + psmisc | | + pspp | | + pwdutils | | + radius | | + recode | | + rosegarden | | + rpm | | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] | + sed | | + sharutils | | + shishi | | + skencil | | + solfege | [] | + solfege-manual | | + soundtracker | | + sp | | + sysstat | [] | + tar | [] | + texinfo | [] | + tin | | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | | + vice | | + vmm | | + vorbis-tools | | + wastesedge | | + wdiff | | + wget | [] | + wyslij-po | | + xchat | [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +-----------------------------------------------+ + ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne + 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1 + + nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr + +---------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] [] | + aegis | [] [] [] | + ant-phone | [] [] | + anubis | [] [] [] | + aspell | [] [] [] [] [] | + bash | [] [] | + bfd | [] | + bibshelf | [] [] | + binutils | [] [] | + bison | [] [] [] | + bison-runtime | [] [] [] [] [] [] [] | + bluez-pin | [] [] [] [] [] [] [] [] | + bombono-dvd | [] () | + buzztard | [] [] | + cflow | [] | + clisp | [] [] | + coreutils | [] [] [] [] [] [] | + cpio | [] [] [] | + cppi | [] | + cpplib | [] | + cryptsetup | [] | + dfarc | [] | + dialog | [] [] [] [] | + dico | [] | + diffutils | [] [] [] [] [] [] | + dink | () | + doodle | [] [] | + e2fsprogs | [] [] | + enscript | [] [] [] [] [] | + exif | [] [] [] () [] | + fetchmail | [] [] [] [] | + findutils | [] [] [] [] [] | + flex | [] [] [] [] [] | + freedink | [] [] | + gas | | + gawk | [] [] [] [] | + gcal | | + gcc | [] | + gettext-examples | [] [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] [] [] [] | + gettext-tools | [] [] [] [] [] [] | + gip | [] [] [] [] [] | + gjay | | + gliv | [] [] [] [] [] [] | + glunarclock | [] [] [] [] [] | + gnubiff | [] () | + gnucash | [] () () () | + gnuedu | [] | + gnulib | [] [] [] [] | + gnunet | | + gnunet-gtk | | + gnutls | [] [] | + gold | | + gpe-aerial | [] [] [] [] [] [] [] | + gpe-beam | [] [] [] [] [] [] [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] [] [] [] | + gpe-clock | [] [] [] [] [] [] [] [] | + gpe-conf | [] [] [] [] [] [] [] | + gpe-contacts | [] [] [] [] [] | + gpe-edit | [] [] [] | + gpe-filemanager | [] [] [] | + gpe-go | [] [] [] [] [] [] [] [] | + gpe-login | [] [] | + gpe-ownerinfo | [] [] [] [] [] [] [] [] | + gpe-package | [] [] | + gpe-sketchbook | [] [] [] [] [] [] [] | + gpe-su | [] [] [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] [] [] [] | + gpe-timesheet | [] [] [] [] [] [] [] [] | + gpe-today | [] [] [] [] [] [] [] [] | + gpe-todo | [] [] [] [] [] | + gphoto2 | [] [] [] [] [] [] [] [] | + gprof | [] [] [] | + gpsdrive | [] [] | + gramadoir | [] [] | + grep | [] [] [] [] | + grub | [] [] [] | + gsasl | [] [] [] [] | + gss | [] [] [] | + gst-plugins-bad | [] [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] [] [] | + gtkam | [] [] [] [] [] [] | + gtkorphan | [] | + gtkspell | [] [] [] [] [] [] [] [] [] [] | + gutenprint | [] [] | + hello | [] [] [] [] | + help2man | [] [] | + hylafax | [] | + idutils | [] [] [] [] [] | + indent | [] [] [] [] [] [] [] | + iso_15924 | [] [] [] [] | + iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] | + iso_3166_2 | [] [] [] | + iso_4217 | [] [] [] [] [] [] [] [] | + iso_639 | [] [] [] [] [] [] [] [] [] | + iso_639_3 | [] [] | + jwhois | [] [] [] [] | + kbd | [] [] [] | + keytouch | [] [] [] | + keytouch-editor | [] [] [] | + keytouch-keyboa... | [] [] [] | + klavaro | [] [] | + latrine | [] [] | + ld | | + leafpad | [] [] [] [] [] [] [] [] [] | + libc | [] [] [] [] | + libexif | [] [] () [] | + libextractor | | + libgnutls | [] [] | + libgpewidget | [] [] [] | + libgpg-error | [] [] | + libgphoto2 | [] [] | + libgphoto2_port | [] [] [] [] [] | + libgsasl | [] [] [] [] [] | + libiconv | [] [] [] [] [] | + libidn | [] [] | + lifelines | [] [] | + liferea | [] [] [] [] [] () () [] | + lilypond | [] | + linkdr | [] [] [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] | + m4 | [] [] [] [] [] | + mailfromd | [] | + mailutils | [] | + make | [] [] [] [] | + man-db | [] [] [] | + man-db-manpages | [] [] [] | + minicom | [] [] [] [] | + mkisofs | [] [] [] | + myserver | | + nano | [] [] [] [] | + opcodes | [] [] | + parted | [] [] [] [] | + pies | [] | + popt | [] [] [] [] | + psmisc | [] [] [] | + pspp | [] [] | + pwdutils | [] | + radius | [] [] [] | + recode | [] [] [] [] [] [] [] [] | + rosegarden | () () | + rpm | [] [] [] | + rush | [] [] | + sarg | | + screem | | + scrollkeeper | [] [] [] [] [] [] [] [] | + sed | [] [] [] [] [] [] [] [] [] | + sharutils | [] [] [] [] | + shishi | [] | + skencil | [] [] | + solfege | [] [] [] [] | + solfege-manual | [] [] [] | + soundtracker | [] | + sp | | + sysstat | [] [] [] [] | + tar | [] [] [] [] | + texinfo | [] [] [] [] | + tin | [] | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] [] [] [] [] | + vice | [] | + vmm | [] | + vorbis-tools | [] [] | + wastesedge | [] | + wdiff | [] [] | + wget | [] [] [] [] [] [] [] | + wyslij-po | [] [] [] | + xchat | [] [] [] [] [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +---------------------------------------------------+ + nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr + 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37 + + sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW + +---------------------------------------------------+ + a2ps | [] [] [] [] [] | 27 + aegis | [] | 9 + ant-phone | [] [] [] [] | 9 + anubis | [] [] [] [] | 15 + aspell | [] [] [] | 20 + bash | [] [] [] | 12 + bfd | [] | 6 + bibshelf | [] [] [] | 16 + binutils | [] [] | 8 + bison | [] [] | 12 + bison-runtime | [] [] [] [] [] [] | 29 + bluez-pin | [] [] [] [] [] [] [] [] | 37 + bombono-dvd | [] | 4 + buzztard | [] | 7 + cflow | [] [] [] | 9 + clisp | | 10 + coreutils | [] [] [] [] | 22 + cpio | [] [] [] [] [] [] | 13 + cppi | [] [] | 5 + cpplib | [] [] [] [] [] [] | 14 + cryptsetup | [] [] | 7 + dfarc | [] | 9 + dialog | [] [] [] [] [] [] [] | 30 + dico | [] | 2 + diffutils | [] [] [] [] [] [] | 30 + dink | | 4 + doodle | [] [] | 7 + e2fsprogs | [] [] [] | 11 + enscript | [] [] [] [] | 17 + exif | [] [] [] | 16 + fetchmail | [] [] [] | 17 + findutils | [] [] [] [] [] | 20 + flex | [] [] [] [] | 15 + freedink | [] | 10 + gas | [] | 4 + gawk | [] [] [] [] | 18 + gcal | [] [] | 5 + gcc | [] [] [] | 7 + gettext-examples | [] [] [] [] [] [] [] | 34 + gettext-runtime | [] [] [] [] [] [] [] | 29 + gettext-tools | [] [] [] [] [] [] | 22 + gip | [] [] [] [] | 22 + gjay | [] | 3 + gliv | [] [] [] | 14 + glunarclock | [] [] [] [] [] | 19 + gnubiff | [] [] | 4 + gnucash | () [] () [] () | 10 + gnuedu | [] [] | 7 + gnulib | [] [] [] [] | 16 + gnunet | [] | 1 + gnunet-gtk | [] [] [] | 5 + gnutls | [] [] [] | 10 + gold | [] | 4 + gpe-aerial | [] [] [] | 18 + gpe-beam | [] [] [] | 19 + gpe-bluetooth | [] [] [] | 13 + gpe-calendar | [] [] [] [] | 12 + gpe-clock | [] [] [] [] [] | 28 + gpe-conf | [] [] [] [] | 20 + gpe-contacts | [] [] [] | 17 + gpe-edit | [] [] [] | 12 + gpe-filemanager | [] [] [] [] | 16 + gpe-go | [] [] [] [] [] | 25 + gpe-login | [] [] [] | 11 + gpe-ownerinfo | [] [] [] [] [] | 25 + gpe-package | [] [] [] | 13 + gpe-sketchbook | [] [] [] | 20 + gpe-su | [] [] [] [] [] | 30 + gpe-taskmanager | [] [] [] [] [] | 29 + gpe-timesheet | [] [] [] [] [] | 25 + gpe-today | [] [] [] [] [] [] | 30 + gpe-todo | [] [] [] [] | 17 + gphoto2 | [] [] [] [] [] | 24 + gprof | [] [] [] | 15 + gpsdrive | [] [] [] | 11 + gramadoir | [] [] [] | 11 + grep | [] [] [] | 10 + grub | [] [] [] | 14 + gsasl | [] [] [] [] | 14 + gss | [] [] [] | 11 + gst-plugins-bad | [] [] [] [] | 26 + gst-plugins-base | [] [] [] [] [] | 24 + gst-plugins-good | [] [] [] [] | 24 + gst-plugins-ugly | [] [] [] [] [] | 29 + gstreamer | [] [] [] [] | 22 + gtick | [] [] [] | 13 + gtkam | [] [] [] | 20 + gtkorphan | [] [] [] | 14 + gtkspell | [] [] [] [] [] [] [] [] [] | 45 + gutenprint | [] | 10 + hello | [] [] [] [] [] [] | 21 + help2man | [] [] | 7 + hylafax | [] | 5 + idutils | [] [] [] [] | 17 + indent | [] [] [] [] [] [] | 30 + iso_15924 | () [] () [] [] | 16 + iso_3166 | [] [] () [] [] () [] [] [] () | 53 + iso_3166_2 | () [] () [] | 9 + iso_4217 | [] () [] [] () [] [] | 26 + iso_639 | [] [] [] () [] () [] [] [] [] | 38 + iso_639_3 | [] () | 8 + jwhois | [] [] [] [] [] | 16 + kbd | [] [] [] [] [] | 15 + keytouch | [] [] [] | 16 + keytouch-editor | [] [] [] | 14 + keytouch-keyboa... | [] [] [] | 14 + klavaro | [] | 11 + latrine | [] [] [] | 10 + ld | [] [] [] [] | 11 + leafpad | [] [] [] [] [] [] | 33 + libc | [] [] [] [] [] | 21 + libexif | [] () | 7 + libextractor | [] | 1 + libgnutls | [] [] [] | 9 + libgpewidget | [] [] [] | 14 + libgpg-error | [] [] [] | 9 + libgphoto2 | [] [] | 8 + libgphoto2_port | [] [] [] [] | 14 + libgsasl | [] [] [] | 13 + libiconv | [] [] [] [] | 21 + libidn | () [] [] | 11 + lifelines | [] | 4 + liferea | [] [] [] | 21 + lilypond | [] | 7 + linkdr | [] [] [] [] [] | 17 + lordsawar | | 1 + lprng | [] | 3 + lynx | [] [] [] [] | 17 + m4 | [] [] [] [] | 19 + mailfromd | [] [] | 3 + mailutils | [] | 5 + make | [] [] [] [] | 21 + man-db | [] [] [] | 8 + man-db-manpages | | 4 + minicom | [] [] | 16 + mkisofs | [] [] | 9 + myserver | | 0 + nano | [] [] [] [] | 21 + opcodes | [] [] [] | 11 + parted | [] [] [] [] [] | 15 + pies | [] [] | 3 + popt | [] [] [] [] [] [] | 27 + psmisc | [] [] | 11 + pspp | | 4 + pwdutils | [] [] | 6 + radius | [] [] | 9 + recode | [] [] [] [] | 28 + rosegarden | () | 0 + rpm | [] [] [] | 11 + rush | [] [] | 4 + sarg | | 1 + screem | [] | 3 + scrollkeeper | [] [] [] [] [] | 27 + sed | [] [] [] [] [] | 30 + sharutils | [] [] [] [] [] | 22 + shishi | [] | 3 + skencil | [] [] | 7 + solfege | [] [] [] [] | 16 + solfege-manual | [] | 8 + soundtracker | [] [] [] | 9 + sp | [] | 3 + sysstat | [] [] | 15 + tar | [] [] [] [] [] [] | 23 + texinfo | [] [] [] [] [] | 17 + tin | | 4 + unicode-han-tra... | | 0 + unicode-transla... | | 2 + util-linux-ng | [] [] [] [] | 20 + vice | () () | 1 + vmm | [] | 4 + vorbis-tools | [] | 6 + wastesedge | | 2 + wdiff | [] [] | 7 + wget | [] [] [] [] [] | 26 + wyslij-po | [] [] | 8 + xchat | [] [] [] [] [] [] | 36 + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | 63 + xkeyboard-config | [] [] [] | 22 + +---------------------------------------------------+ + 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW + 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41 2618 + + Some counters in the preceding matrix are higher than the number of +visible blocks let us expect. This is because a few extra PO files are +used for implementing regional variants of languages, or language +dialects. + + For a PO file in the matrix above to be effective, the package to +which it applies should also have been internationalized and +distributed as such by its maintainer. There might be an observable +lag between the mere existence a PO file and its wide availability in a +distribution. + + If June 2010 seems to be old, you may fetch a more recent copy of +this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date +matrix with full percentage details can be found at +`https://translationproject.org/extra/matrix.html'. + +1.5 Using `gettext' in new packages +=================================== + +If you are writing a freely available program and want to +internationalize it you are welcome to use GNU `gettext' in your +package. Of course you have to respect the GNU Library General Public +License which covers the use of the GNU `gettext' library. This means +in particular that even non-free programs can use `libintl' as a shared +library, whereas only free software can use `libintl' as a static +library or use modified versions of `libintl'. + + Once the sources are changed appropriately and the setup can handle +the use of `gettext' the only thing missing are the translations. The +Free Translation Project is also available for packages which are not +developed inside the GNU project. Therefore the information given above +applies also for every other Free Software Project. Contact +`coordinator@translationproject.org' to make the `.pot' files available +to the translation teams. + diff --git a/AUTHORS b/AUTHORS new file mode 100644 index 0000000..5d323eb --- /dev/null +++ b/AUTHORS @@ -0,0 +1,71 @@ +Package: libgpg-error +Maintainer: Werner Koch +Bug reports: bug-gnupg@gnupg.org +Mailing list: gnupg-devel@gnupg.org +Security related bug reports: security@gnupg.org +License (library): LGPLv2.1+ +License (manual tools): GPLv2+ with exception + +Libgpg-error is free software. See the files COPYING.LIB and COPYING +for copying conditions. License copyright years may be listed using +range notation, e.g., 2000-2013, indicating that every year in the +range, inclusive, is a copyrightable year that would otherwise be +listed individually. + + +List of Copyright holders +========================= + + Copyright (C) 2001-2018 g10 Code GmbH + Copyright (C) 1995-2017 Free Software Foundation, Inc. + Copyright (C) 1998-2006, 2008-2017 Werner Koch + Copyright (C) 2014 Jedi Lin + + +Authors with a DCO +================== + +We do not collect DCOs for libgpg-error. As a supporting library for +GnuPG, Libgcrypt, and GPGME a DCO for any of these projects is +sufficient. + + +Translators +=========== + +cs - Petr Pisar +da - Joe Hansen +de - Werner Koch +eo - Felipe Castro +fr - David Prévot + Stephane Roy +it - Francesco Groccia +jp - Takeshi Hamasaki + Yasuaki Taniguchi +nl - Freek de Kruijf +pl - Jakub Bogusz +ro - Laurentiu Buzdugan +sv - Daniel Nylander +uk - Yuri Chornoivan +vi - Clytie Siddall +zh_CN - Aron Xu + + +More credits +============ + +Robert Schiele wrote libgpg-error.spec. + +Thanks to Yukihiro Nakadaira for his public domain iconv +implementation for Windows. + + + Copyright 2003-2007, 2013-2017 g10 Code GmbH + + This file is free software; as a special exception the author gives + unlimited permission to copy and/or distribute it, with or without + modifications, as long as this notice is preserved. + + This file is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY, to the extent permitted by law; without even the + implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. diff --git a/COPYING b/COPYING new file mode 100644 index 0000000..623b625 --- /dev/null +++ b/COPYING @@ -0,0 +1,340 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/COPYING.LIB b/COPYING.LIB new file mode 100644 index 0000000..2d2d780 --- /dev/null +++ b/COPYING.LIB @@ -0,0 +1,510 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations +below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it +becomes a de-facto standard. To achieve this, non-free programs must +be allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control +compilation and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at least + three years, to give the same user the materials specified in + Subsection 6a, above, for a charge no more than the cost of + performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply, and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License +may add an explicit geographical distribution limitation excluding those +countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms +of the ordinary General Public License). + + To apply these terms, attach the following notices to the library. +It is safest to attach them to the start of each source file to most +effectively convey the exclusion of warranty; and each file should +have at least the "copyright" line and a pointer to where the full +notice is found. + + + + Copyright (C) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or +your school, if any, to sign a "copyright disclaimer" for the library, +if necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James + Random Hacker. + + , 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! + + diff --git a/ChangeLog b/ChangeLog new file mode 100644 index 0000000..b407328 --- /dev/null +++ b/ChangeLog @@ -0,0 +1,4025 @@ +2018-05-02 Werner Koch + + Release 1.31. + + commit 10a984d25048a09d1c489224bae866372e8066a1 + * configure.ac: Set LT version to C24/A24/R2. + +2018-05-01 Werner Koch + + core,w32: Avoid recursive use of npth_unprotect. + + commit b26a227173e8e9b91be14f06ee781c6e214e50ff + * src/w32-estream.c (reader): Use standard free. + (writer): Ditto. + +2018-05-01 emma peel + + po: new Spanish translation. + + commit 7e2517a29619c35257b38aa137b6772e471d7e4e + + +2018-04-30 Werner Koch + + Release 1.30. + + commit cac048bf8454ade95a905f9d3840b1ec284fce20 + * configure.ac: Bump LT version to C24/A/24/R1. + + build: More release creation automation. + + commit d1d4c4f8eb9830bfb671054e1558342106ba9d8d + * Makefile.am: Add release and sign-release targets. + + core: Fix gpgrt_poll for Windows under nPth. + + commit 4f45f3e0bb404b4a9787cb55ca154c6f60c1437b + * src/estream.c (_gpgrt_poll) [W32]: Use syscall clamp. + +2018-04-13 NIIBE Yutaka + + doc: Fix yat2m build for cross compilation. + + commit 792877a08ca7bc9d1377161dc9af374602a394cc + * doc/Makefile.am: Fix target of yat2m-for-build. + +2018-04-12 NIIBE Yutaka + + build: Check -lsocket -lnsl for Solaris. + + commit e35749023ca68de6f1f85d3072f7b36fd6f6fe7c + * configure.ac: Check inet_addr for -lnsl, and socket for -lsocket. + +2018-04-11 Damien Goutte-Gattat via Gnupg-devel + + build: Make sure version.texi is generated in time. + + commit 8ef76d9373db16f1ca176f9c87c8dac2758c8b85 + [[PGP Signed Part:Good signature from AA4373E6C82C78AD Damien Goutte-Gattat (trust undefined) created at 2018-04-11T17:05:27+0200 using RSA]] + [1. text/plain] + + * doc/Makefile.am (yat2m-stamp): Depend on version.texi. + +2018-04-11 Werner Koch + + Release 1.29. + + commit c3825327da826e434ada9abde34e6bbd7ef61737 + * configure.ac: Bump LT version to C24/A24/R0. + + core: Finalize the API for argparse. + + commit e901c9fb04f5a96ba2bd49225b396ce7857a3782 + * src/gpg-error.h.in (ARGPARSE_end): Simplify. + * src/argparse.c (_gpgrt_argparse_internal_s): Add field opts. + (deinitialize): Release new field. + (initialize): Add arg opts and create a copy of the option list. Add + the internal options. + (_gpgrt_argparse): Rename arg opts to opts_orig and set new local var + opts. Adjust all references to opts. + (find_long_option): Adjust for chnaged type of OPTS. Re-indent. + (arg_parse): Remove internal option assignment. Rename arg opts to + opts_orig and set new local var opts. Adjust all references to opts. + (show_help): Adjust all references to opts. + +2018-03-27 NIIBE Yutaka + + doc: Support cross compilation for yat2m. + + commit efc4769339d42a4a399c040c146cf4a29c02ea4f + * configure.ac (HAVE_YAT2M): New. + * doc/Makefile.am [CROSS_COMPILING]: Supported. + +2018-03-22 Werner Koch + + build: Add option --git-build to autogen.sh. + + commit 1b30d21c8780f5510815d4fb2523afad9fff85dc + + + yat2m: Avoid compiler warnings. + + commit 30621ee4c13006d08881994c32c89f60604c0188 + * doc/yat2m.c (evaluate_conditions): Mark args unused + (proc_texi_cmd): Avoid shadowing warning. + + core: Add Base-64 encoder. + + commit ffc8f805165a13d16ed227051c59d732117ec9d4 + * src/b64enc.c: Change to fit into libgpg-error. + * src/Makefile.am: Add b64enc.c + * src/b64dec.c: Use xtrymalloc etc. Always use gpg_err_code_t. + (_gpgrt_b64dec_start): Set decoder flag + (_gpgrt_b64dec_finish): Check for conflict. + (_gpgrt_b64state): Move to ... + * src/gpgrt-int.h: here. Add new fields. + * src/visibility.c (gpgrt_b64enc_start): New. + (gpgrt_b64enc_write): New. + (gpgrt_b64enc_finish): New. + * src/gpg-error.vers, src/gpg-error.def.in: Add new functions. + * src/gpg-error.h.in: Ditto. + * src/visibility.h: Ditto. + + * tests/t-b64dec.c: Remove. + * tests/t-b64.c: New. + * tests/Makefile.am (TESTS): Replace t-b64dec by t-b64. + +2018-03-22 NIIBE Yutaka + + doc: Fix build and installation of yat2m. + + commit 4dc6d4d2067c726cdb13593bf151637319ff65e6 + * configure.ac (YAT2M): Require it when cross compiling. + * doc/Makefile.am (bin_PROGRAMS): Add yat2m. + +2018-03-21 Werner Koch + + po: Merge GnuPG's strings from argparse.c. + + commit e492e0a0a73e1ea9c80f355a25f632af69d3a569 + + + tools: Use gpgrt_argparse for the gpg-error tool. + + commit 11ce9bc3d6fe75859e18112824ae7ec3ca0fc8df + * src/gpg-error.c (show_usage): Remove. + (my_strusage): New. + (main): Change to use argparse. Also use log_error. + + core: Add public function gpgrt_usage. + + commit ed78ef7f06649f85f1c94c4fb2bd3f6b16fd9a63 + * src/visibility.c (gpgrt_usage): New. + + core: Add the group of argparse functions. + + commit 13d6fbfd4360cb74588556a3a0058c4057d0bcf0 + * src/visibility.c (gpgrt_argparse): New. + (gpgrt_strusage): New. + (gpgrt_set_strusage): New. + (gpgrt_set_usage_outfnc): New. + (gpgrt_set_fixed_string_mapper): New. + * src/gpg-error.def.in, src/gpg-error.vers: Add new functions. + * src/gpg-error.h.in: Add ARGPARSE macros from the former argparse.h. + (gpgrt_argparse_t): New. + (gpgrt_opt_t): New. + * configure.ac (AH_BOTTOM): Request argparse macros. + * src/Makefile.am (libgpg_error_la_SOURCES): Add argparse.c. + * src/argparse.h: Remove. + * src/argparse.c: Revamp to fit into libgpg-error. + (_gpgrt_argparse): New. + (_gpgrt_usage): Rename from usage. + (_gpgrt_strusage): Rename from strusage. Define two new levels and + templates for three common licenses. + (_gpgrt_set_strusage): Rename from set_strusage. + (_gpgrt_set_usage_outfnc): New. + (_gpgrt_set_fixed_string_mapper): New. + + * tests/t-argparse.c: New. + +2018-03-18 Werner Koch + + core: Fix regression on arm64 due to invalid use of va_list. + + commit 791177de023574223eddf7288eb7c5a0721ac623 + * src/logging.c (_gpgrt_log_printhex): Provide a dummy arg instead of + NULL. + +2018-03-14 Werner Koch + + core: Fix building on W64. + + commit c36a60687976d98b54dac17f699dfca4918a737c + * src/w32-add.h: Remove hack to define pid_t. + * src/gpg-error.h.in: Eval macro to define pid_t. + * src/mkheader.c (have_sys_types_h, sys_types_h_included): New. + (parse_config_h): Test for sys/types.h. + (write_special): Protect inclusion of sys/types.h. Define new macro + 'define:pid_t'. + +2018-03-13 Werner Koch + + Release 1.28. + + commit e32342397eab85fed5ef709317cc50dc7cbc41a5 + + +2018-02-28 NIIBE Yutaka + Karsten Merker + + syscfg: Add a riscv64 architecture. + + commit 596c0d701edeb45e0069bb74b9343e3d5b708ef0 + * src/syscfg/lock-obj-pub.riscv64-unknown-linux-gnu.h: New. + * src/Makefile.am (lock_obj_pub): Add it. + +2018-02-21 Werner Koch + Todd Zullinger + + build: Document how to use git send-email. + + commit 70058cd9f944d620764e57c838209afae8a58c78 + * autogen.rc: Add patches_to. + * autogen.sh: Run git config sendemail.to. + * doc/HACKING: Describe use of git send-email. + +2018-02-21 Thorsten Behrens + + doc: clarify patch submission workflow. + + commit 887530733d0486ab68ff351c4855f5450c2d50e6 + + +2017-12-11 Werner Koch + + core: Avoid using estream_t in the public API. + + commit f9a33a7f7e44a644ff4e31f7e9f1c2c1ec1f8eee + * src/gpg-error.h.in: Always use gpgrt_stream-t. + +2017-12-08 Werner Koch + + core: Rename the gpgrt_log_levels enum values. + + commit de167fa92d009745c51dae547990845282cbb351 + * src/gpg-error.h.in (gprt_log_levels): Rename to GPGRT_LOGLVL. + +2017-11-29 Werner Koch + + core: Wrap blocking system calls of the spawn functions. + + commit 4acf116ba6d144c2cfa39ff54a23b8864b4ce895 + + + core: Unify syscall_clamp functions. + + commit adc786d034b63176b941a1ef8d996acbf8d0ea5d + * src/estream.c (_gpgrt_set_syscall_clamp) + (_gpgrt_get_syscall_clamp): Move to ... + * src/syscall-clamp.c: new file. + (_gpgrt_pre_syscall, _gpgrt_post_syscall): New. + * src/Makefile.am (libgpg_error_la_SOURCES): Add that file. + * src/estream.c: Replace the syscall wrapper with the new functions. + * src/posix-lock.c: Ditto. + * src/w32-lock.c: Ditto. + * src/posix-thread.c: Ditto. + * src/w32-thread.c: Ditto. + + core: Implement the spawn functions. + + commit 1865c0ba1769b407a3c504f1ab0a4278704a9fc1 + * src/gpg-error.h.in (GPGRT_SPAWN_NONBLOCK): New const. + (GPGRT_SPAWN_RUN_ASFW): New const. + (GPGRT_SPAWN_DETACHED): New const. + (gpgrt_make_pipe): New function. + (gpgrt_create_pipe): New macro. + (gpgrt_create_inbound_pipe): New macro. + (gpgrt_create_outbound_pipe): New macro. + (gpgrt_spawn_process): New function. + (gpgrt_spawn_process_fd): New function. + (gpgrt_spawn_process_detached): New function. + (gpgrt_wait_process): New function. + (gpgrt_wait_processes): New function. + (gpgrt_kill_process): New function. + (gpgrt_release_process): New function. + * src/gpg-error.def.in, src/gpg-error.vers: Add new functions. + * src/visibility.c, src/visibility.h: Add wrappers for new functions. + * src/spawn-posix.c: Rework to better fit the use in gpgrt. Rename + all public function with a _gpgrt prefix. + * src/spawn-w32.c: Ditto. + * src/gpgrt-int.h: Likewise. + * src/Makefile.am (arch_sources): Add spawn-posix.c and spawn-w32.c. + * src/w32-add.h: Add pid_t typedef as a temporary hack. + * configure.ac: Check for signal.h and getrlimit. + (AC_FUNC_FORK): New. + + Import and relicense exechelp* functions from GnuPG. + + commit 8f41cc23b12485404203be5881aaaadb78696b4d + * src/spawn-posix.c: New. Taken from GnuPG's exechelp-posix.c. + * src/spawn-w32.c: New. Taken from GnuPG's exechelp-w32.c. + * src/gpgrt-int.h: Include prototypes from GnuPG's exechelp.h. + +2017-11-28 Werner Koch + + core: Change new functions to return gpg_err_code_t. + + commit 513415c71781ab400ebb01f6b4cf2984ec6b1757 + * src/gpg-error.h.in (gpgrt_sentenv, gpgrt_mkdir, gpgrt_chdir): Change + return type to gpg_err_code_t. + * src/sysutils.c (_gpgrt_setenv): Implement that. + (_gpgrt_mkdir): Ditto. + (_gpgrt_chdir): Ditto. + * gpgscm/ffi.c (do_setenv, do_mkdir): Adjust for this change. + + gpgscm: Some adjustments for use in gpgrt. + + commit 930d27ba6b1205395add0c79139e62355a1d5b62 + * gpgscm/Makefile.am: Remove cruft leftover from GnuPG. Link to the + just build libgpg-error. + * gpgscm/private.h: Include gpgrt.h and provide i18n macros. + (xfree, xtrymalloc, xtrycalloc, xtryrealloc): New macros. + (xmalloc, xstrdup): New inline functions. + * gpgscm/main.c: Remove inclusion of gcrypt.h and gpg-error.h. Remove + all other gnupg specific headers. + (opts, parse_arguments): Temporary comment out. + (main): Adjust for use with gpgrt. Temporary comment out some stuff. + * gpgscm/ffi-private.h: Include local gpgrt.h instead of gpg-error.h. + * gpgscm/ffi.h: Ditto. + * gpgscm/ffi.c: Remove gpg-error.h and headers from GnuPG. + (do_getenv): Use gpgrt_getenv. + (do_setenv): Use gpgrt_setenv. + (do_mkdtemp): Temporary return an error. + (unlink_recursively): Use gpgrt_bsprintf. + (do_getcwd): Use gpgrt_getcwd. + (do_mkdir): Use gpgrt_mkdir. + (do_get_isotime): Temporary return an error. + (do_get_time): Directly use time(). + + core: New API functions gpgrt_mkdir, gpgrt_chdir, gpgrt_getcwd. + + commit 4a2538e69dd35377bce0fb584f72322c69a111b3 + * src/gpg-error.h.in (gpgrt_mkdir, gpgrt_chdir, gpgrt_getcwd): New. + * src/visibility.c, src/visibility.h: Add wrappers. + * src/gpg-error.vers, src/gpg-error.def.in: Add them. + * src/sysutils.c (modestr_to_mode): New. + (_gpgrt_mkdir, _gpgrt_chdir, _gpgrt_getcwd): New. + * m4/gnupg-misc.m4: New. + * m4/Makefile.am (EXTRA_DIST): Add new M4 file. + * configure.ac: Call new GNUPG_FUNC_MKDIR_TAKES_ONE_ARG. + (AC_CHECK_FUNCS): Add stat. + + core: Prepare to build with gpgscm. + + commit 241e9a73891fcd12f124aab1a299c2cf4f8eebc4 + * configure.ac: New option --enable-gpgscm. Create gpgscm/Makefile. + (GPGRT_ENABLE_LOG_MACROS): Define. + * Makefile.am (SUBDIRS): Add gpgscm + * src/logging.c (_gpgrt_logv_clock): Do not use the log_debug macro. + + core: New API functions gpgrt_getenv and gpgrt_setenv. + + commit b67daca506991507cea9d383df7faf95117e58a6 + * src/gpg-error.h.in (gpgrt_getenv, gpgrt_setenv): New. + (gpgrt_unsetenv): New macro. + * src/gpg-error.vers, src/gpg-error.def.in: Add them. + * src/visibility.c (gpgrt_getenv, gpgrt_setenv): New. + * src/visibility.h: Add them. + * src/sysutils.c: Include string.h and on Windows windows.h. + (_gpgrt_getenv): New. + (_gpgrt_setenv): New. + +2017-11-27 Werner Koch + + core: Install new files gpgrt.m4 and gpgrt-config. + + commit 97b0881216af24f2a46c11650e23691cff9cb12a + * src/gpgrt.m4: New. Bascially a copy of libgpg-error.m4 + * src/gpg-error-config.in: Decide which name to print. + * src/Makefile.am (nodist_bin_SCRIPTS): Add gpgrt-config. + (m4data_DATA): Add gpgrt.m4 + (EXTRA_DIST): Add gpgrt.m4. + (BUILT_SOURCES): Add gpgrt-config. + (CLEANFILES): Add gpgrt-config. + (gpgrt-config): Create from gpg-error-config. + + core: Avoid endless recursion if log_set_sink has not been used. + + commit 84ebd2f34882d29510f819a797fade0297fe9ab9 + * src/logging.c (_gpgrt_log_set_sink): Do not call gf_is_valid if the + default sink has been requested. + + core: Add new macro log_assert to the API. + + commit d1e3401013f85620f3136958be079c13ca758b20 + * src/gpg-error.h.in (log_assert): New macro. + +2017-11-22 Werner Koch + + core: Do not use the estream_t alias in gpg-error.h. + + commit e0ef8126c20216f79b7ad147c103bb2cf2790c59 + * src/gpg-error.h.in: Use gpgrt_stream_t in prototypes. + +2017-11-17 Werner Koch + + w32: Avoid unused code warning. + + commit a950326d20990fa33cee637d5b54d708fff585b2 + * src/w32-estream.c (_gpgrt_w32_poll) [!ENABLE_TRACING]: Do not use + waitinfo. + + w32: Add new API fucntion gpgrt_w32_reg_query_string. + + commit b5c4a2721d7b4bd54705c53e6f294ab2ef66a6f7 + * src/w32-reg.c: New. + * src/w32-add.h: Add gpgrt_w32_reg_query_string. + * src/visibility.c (gpgrt_w32_reg_query_string): New wrapper. + * src/gpg-error.def.in: Add gpgrt_w32_reg_query_string. + * configure.ac (ac_check_funcs): Add stpcpy. + * src/Makefile.am (arch_sources): Add w32-reg.c + (socklibs): New. + (libgpg_error_la_LIBADD): Add socklibs. + * src/gpgrt-int.h (xfree, xtrymalloc, xtrycalloc) + (xtryrealloc): New internal macros. + (_gpgrt_stpcpy, stpcpy): New replacement fucntion and macro. + * src/logging.c (_gpgrt_logv_internal): Use new registry query + function and add standard registry key. + + core: New API functions gpgrt_strdup and gpgrt_strconcat. + + commit 0d8d46c76a32176be440b062d2501bbb044fb99d + * src/visibility.c (gpgrt_strdup): New API fucntion. + (gpgrt_strconcat): New API fucntion. + * src/visibility.h: Add corresponding macros. + * src/gpg-error.def.in: Add them. + * src/gpg-error.vers: Add them. + * src/gpgrt-int.h (DIM): New macro. + * src/init.c (_gpgrt_strdup): New. + (_gpgrt_strconcat_core): New. + (_gpgrt_strconcat): New. + + core: New API functions gpgrt_malloc, gpgrt_calloc, and gpgrt_realloc. + + commit 80c18e1b212cc91946864db7a53da50e9f91b861 + * src/visibility.c (gpgrt_realloc): New API function. + (gpgrt_malloc): New API function. + (gpgrt_calloc): New API function. + * src/visibility.h: Add corresponding macros. + * src/gpg-error.def.in: Add them. + * src/gpg-error.vers: Add them. + * src/init.c (_gpgrt_calloc): New. + * src/gpg-error.h.in: Add prototypes. + + core: Add logging API. + + commit 1b653e7f37e2eb2a8f590a43651eb8aecbe8756e + * src/visibility.c (gpgrt_get_errorcount): New API. + (gpgrt_inc_errorcount): New API. + (gpgrt_log_set_sink): New API. + (gpgrt_log_set_socket_dir_cb): New API. + (gpgrt_log_set_pid_suffix_cb): New API. + (gpgrt_log_set_prefix): New API. + (gpgrt_log_get_prefix): New API. + (gpgrt_log_test_fd): New API. + (gpgrt_log_get_fd): New API. + (gpgrt_log_get_stream): New API. + (gpgrt_log): New API. + (gpgrt_logv): New API. + (gpgrt_logv_prefix): New API. + (gpgrt_log_string): New API. + (gpgrt_log_info): New API. + (gpgrt_log_error): New API. + (gpgrt_log_fatal): New API. + (gpgrt_log_bug): New API. + (gpgrt_log_debug): New API. + (gpgrt_log_debug_string): New API. + (gpgrt_log_printf): New API. + (gpgrt_log_flush): New API. + (gpgrt_log_printhex): New API. + (gpgrt_log_clock): New API. + (_gpgrt_log_assert): New function for the ABI. + * src/visibility.h: Add corresponding macros. + * src/gpg-error.def.in: Add new functions. + * src/gpg-error.vers: Add new functions. + * src/gpg-error.h.in (GPGRT_LOG_WITH_PREFIX): New constant. + (GPGRT_LOG_WITH_TIME): New constant. + (GPGRT_LOG_WITH_PID): New constant. + (GPGRT_LOG_RUN_DETACHED): New constant. + (GPGRT_LOG_NO_REGISTRY): New constant. + (GPGRT_LOG_BEGIN): New enum value. + (GPGRT_LOG_CONT): New enum value. + (GPGRT_LOG_INFO): New enum value. + (GPGRT_LOG_WARN): New enum value. + (GPGRT_LOG_ERROR): New enum value. + (GPGRT_LOG_FATAL): New enum value. + (GPGRT_LOG_BUG): New enum value. + (GPGRT_LOG_DEBUG): New enum value. + (log_get_errorcount, log_inc_errorcount, log_set_file, log_set_fd) + (log_set_stream, log_set_socket_dir_cb, log_set_pid_suffix_cb) + (log_set_prefix, log_get_prefix, log_test_fd, log_get_fd) + (log_get_stream, log_log, log_logv, log_logv_prefix, log_string) + (log_bug, log_fatal, log_error, log_info, log_debug, log_debug_string) + (log_printf, log_printhex, log_clock) + (log_flush) [GPGRT_ENABLE_LOG_MACROS]: New wrapper macros. + (gpgrt_assert): New macro. + * src/gpgrt-int.h: Add prototypes for logging.c. + (gpgrt_assert): Redefine for internal use. + * src/logging.h: Remove. + * src/logging.c: Include gpgrt-int.h instead of the stuff from GnuPG. + Use _gpgrt malloc funcsions and the internal versions of the estream + functions. Rename all public fucntions with a _gpgrt_ prefix. + (print_prefix): Return the printed length. + (_gpgrt_logv_internal): Ditto. + (_gpgrt_log_printhex): Change order of args and turn into a printf + like function. + (_gpgrt_logv_printhex): New. Take the core of the former + log_printhex. + (_gpgrt_log_clock): Turn into a printf like functions. + (_gpgrt_logv_clock): New. Take the core of the former log_clock. + + New configure options and macros for internal use. + + commit 9c904765c9b2b75e73b196b381470f0fb2f3b458 + * configure.ac: Add option --enable-log-clock. + * configure.ac: Add option --enable-werror. + * src/sysutils.c: New. + * src/Makefile.am (libgpg_error_la_SOURCES): Add sysutils.c + * src/gpgrt-int.h: Add internal i18n macros and hacks to make working + with sockets easier. + (es_stdin, es_stdout, es_stderr): New internal macros. + (snprintf): New macro. + +2017-10-05 Werner Koch + + gpgscm: Add required configure checks. + + commit 7c48edad2c782f416854eaa5c03bcf546d68eae2 + * configure.ac: Add new checks. + * m4/readline.m4: New. Taken from gnupg. + * m4/Makefile.am (EXTRA_DIST): Add it. + +2017-08-21 Justus Winter + + gpgscm: Fix -Wimplicit-fallthrough warnings. + + commit dda5fb3474a81047e5bd52a194640fb44e1d60ab + * tests/gpgscm/scheme.c (CASE): Rearrange so that the case statement + is at the front. + (Eval_Cycle): Improve fallthrough annotations. + +2017-08-08 Werner Koch + + build: New configure option --enable-all-tests. + + commit 3aa37d802ac10a38414a8cfe120de92a76968836 + * configure.ac: New option --enable-all-tests. + * tests/gpgscm/ffi.c (ffi_init): New gloabl var *run-all-tests*. + * tests/openpgp/all-tests.scm (all-tests): Use that var instead + of *maintainer-mode*. + * Makefile.am (AM_DISTCHECK_CONFIGURE_FLAGS): Add --enable-all-tests. + + gpgscm: Make the test summary stand out. + + commit c2fbc80c643db372f16aed100393cd2d4de46979 + * tests/gpgscm/tests.scm (test-pool): Add delimiter lines. + +2017-08-07 Justus Winter + + tests: Do not run all tests unless in maintainer mode. + + commit d230224c38dd4b31348f7a1ad24be9e27935dc80 + * configure.ac: Leak the maintainer mode flag into 'config.h'. + * tests/gpgscm/ffi.c: Pass it into the scheme environment. + * tests/openpgp/all-tests.scm: Only run tests against non-default + configurations (keyring, extended-key-format) in maintainer mode. + +2017-07-18 Justus Winter + + gpgscm,w32: Fix testing for absolute paths. + + commit c4230af0e62d7c8812eaedf4e6451a6288ff5769 + * tests/gpgscm/main.c (path_absolute_p): New function. + (load): Use new function. + +2017-07-14 Justus Winter + + gpgscm: Library improvements. + + commit a4dbace8c1d771bed5783aadf87a8075454e5a35 + * tests/gpgscm/repl.scm (prompt-yes-no?): New function. + * tests/gpgscm/tests.scm (pathsep-split): Likewise. + (pathsep-join): Likewise. + (with-path): Use the new function. + + gpgscm: Fail early if the test setup fails. + + commit c67386dcd95dd6a451b861e178503b29a7b13502 + * tests/gpgscm/tests.scm (make-environment-cache): Check status code + of setup script. + +2017-07-13 Justus Winter + + gpgscm: Make loading of modules less verbose. + + commit 8377569cae0764fd44701d67626b4c96f0bd8804 + * tests/gpgscm/main.c (load): Increase logging threshold. + + gpgscm: Make it impossible to catch '*interpreter-exit*'. + + commit ba3164673676468472ae37f32c3964d231e8a8f8 + * tests/gpgscm/init.scm (throw'): Make it impossible to catch + '*interpreter-exit*'. This fixes 'exit' (and with it 'fail') inside + 'catch' statements. + +2017-07-05 Werner Koch + + syscfg: Add lock-obj-pub file for ia64-unknown-linux-gnu. + + commit 0f5c3f67946fb5389df5b9963e6976b462bf5726 + * src/syscfg/lock-obj-pub.ia64-unknown-linux-gnu.h: new. + * src/Makefile.am (lock_obj_pub): Add it. + + yat2m: Use version from libgpg-error. + + commit 0148ea8d5acde2ad5d0376fb7eaa2221e88f258a + * doc/yat2m.c (VERSION): Define as PACKAGE_VERSION. + * doc/Makefile.am (yat2m): Pass PACKAGE_VERSION with -D. + + build: Install yat2m. + + commit d81b1379edbc6007a89c3b2fff1b51c8dfe2e868 + * doc/Makefile.am (install-exec-hook): New. + (uninstall-local): Uninstall yat2m. + + yat2m: Take care of SOURCE_DATE_EPOCH. + + commit 5494a5728418938d2e42158bb646b07124184e64 + * doc/yat2m.c (main): Set a default for OPT_DATE. + +2017-07-05 NIIBE Yutaka + + doc: minor fix for @xref. + + commit 187e2ad24fb92210587beb779a1cc746821a169c + * doc/yat2m.c (proc_texi_cmd): Captalize "see" for xref. + +2017-07-05 Justus Winter + + doc: Implement simple '@ref'erences. + + commit 55d560358f7ee4a8b68f98e051021a05d4c0bb1f + * doc/yat2m.c (proc_texi_cmd): Handle '@ref'. + +2017-06-19 Justus Winter + + gpgscm: Limit the number of parallel jobs. + + commit 895ae4c6b1bd2fd9758d9c2835d9a3881e57a85a + * ffi.c (do_wait_processes): Suppress the timeout error. + * tests.scm (semaphore): New definition. + (test-pool): Only run a bounded number of tests in parallel. + (test::started?): New function. + (run-tests-parallel): Do not report results, do not start the tests. + (run-tests-sequential): Adapt. + (run-tests): Parse the number of parallel jobs. + + gpgscm: Improve option parsing. + + commit b4628b4a23d7e8b55ef3f17d79ca86ae77cbc685 + * tests/gpgscm/tests.scm (flag): Accept arguments of the form + '--foo=bar'. + + gpgscm: Improve error handling of foreign functions. + + commit f8934d091a274685c1b2a303ac2772adddd303c6 + * tests/gpgscm/ffi.scm (ffi-fail): Do not needlessly join the error + message. + + gpgscm: Improve error reporting. + + commit f57405bea31bac1e3c8e4353aea9bb3cede1b90c + * tests/gpgscm/init.scm (throw'): Guard against 'args' being atomic. + * tests/gpgscm/scheme.c (Eval_Cycle): Remove any superfluous colons in + error messages. + +2017-05-31 Justus Winter + + Align 'es_poll' semantics closer with POSIX. + + commit 4a9857a2b6d8a8e847638416d35398508b3291fd + * src/estream.c (_gpgrt_poll): Do not return early if some streams are + found to be ready before even polling the others. + + build: Prepend the maintainer CFLAGS. + + commit df1d61d5c84d984fb2d2a6f1b69c57878decf13e + * configure.ac: Prepend the maintainer CFLAGS making it possible to + override e.g. the optimization level for debugging. + +2017-05-30 NIIBE Yutaka + + Fix memory leak for estream. + + commit 1e7203515be0b030709109e9da621642dfa20312 + * src/estream.c (do_list_remove): Free the item. + (do_close): Free the buffer. + +2017-05-17 Justus Winter + + gpgscm: Fix checking for opcode arguments. + + commit d2747ce24d445ae7ef3ec4ed0cca2f30aa833e7c + * tests/gpgscm/scheme.c (Eval_Cycle): Update 'pcd' after dispatching + an instruction. + +2017-05-11 Justus Winter + + tests: Make it possible to run all tests using our infrastructure. + + commit 4bc110e219b13d551c0c6c9987b7602e44715032 + * Makefile.am (TESTS_ENVIRONMENT): New variable. + (check-all): New phony target to run all tests. + * tests/gpgme/gpgme-defs.scm (have-gpgme?): New function that tests + whether the GPGME test suite is available instead of exiting the + process. + * tests/gpgscm/init.scm (export): New macro. + * tests/gpgscm/tests.scm (run-tests): New function. + (load-tests): Likewise. + * tests/gpgme/run-tests.scm: Simplify and move the parsing of the list + of tests to 'all-tests.scm'. + * tests/gpgsm/run-tests.scm: Likewise. + * tests/migrations/run-tests.scm: Likewise. + * tests/openpgp/run-tests.scm: Likewise. + * tests/gpgme/Makefile.am: To select the tests to run, use the + variable 'TESTS'. This harmonizes the interface with the automake + test suite. + * tests/gpgsm/Makefile.am: Likewise. + * tests/migrations/Makefile.am: Likewise. + * tests/openpgp/Makefile.am: Likewise. + * tests/openpgp/README: Likewise. + * agent/all-tests.scm: New file. + * common/all-tests.scm: Likewise. + * g10/all-tests.scm: Likewise. + * g13/all-tests.scm: Likewise. + * tests/gpgme/all-tests.scm: Likewise. + * tests/gpgsm/all-tests.scm: Likewise. + * tests/migrations/all-tests.scm: Likewise. + * tests/openpgp/all-tests.scm: Likewise. + * tests/run-tests.scm: Likewise. + + tests: Move the makefile parser. + + commit 197404aae66c688d004337c0aefe153ef6b10f87 + * tests/gpgme/gpgme-defs.scm (parse-makefile, parse-makefile-expand): + Move... + * tests/gpgscm/makefile.scm: ... here. + * tests/gpgscm/Makefile.am (EXTRA_DIST): Add new file. + + gpgscm: Make it possible to set the logfile name. + + commit dd48994b0c99a4099f49ccd437a08ddff39af8a2 + * tests/gpgscm/tests.scm (test): Only set the default log filename + when it has not been set before. + +2017-05-04 Justus Winter + + tests: Support tests that are expected to fail. + + commit 212a0febf8bbaf735ae2e65722f39a47a1c5b122 + * tests/gpgscm/tests.scm (test-pool): Rework reporting. Filter using + the computed test status instead of the return value. Also print the + new categories 'failed expectedly' and 'passed unexpectedly'. + (test): If a test ends with a bang (!), it is expected to fail. Adapt + status, status-string, and xml accordingly. + +2017-05-03 Justus Winter + + gpgscm: Create and re-use frame objects. + + commit 272b0ad65ec4c6023d4b5a4fb2f003ada432b6e5 + * tests/gpgscm/scheme-private.h (struct scheme): New field + 'frame_freelist'. + * tests/gpgscm/scheme.c (enum scheme_types): New type 'T_FRAME'. + (type_to_string): Handle new type. + (settype): New macro. + (gc_disable): Make sure there is at least one frame in the free list. + (mark): Handle frame objects. + (finalize_cell): Likewise. + (dump_stack_initialize): Initialize free list. + (dump_stack_free): Simplify. + (frame_length): New variable. + (dump_stack_make_frame): New function. + (frame_slots): Likewise. + (frame_payload): New macro. + (dump_stack_allocate_frame): New function. + (dump_stack_deallocate_frame): Likewise. + (dump_stack_preallocate_frame): Likewise. + (_s_return): Unpack frame object and deallocate it. + (s_save): Wrap state in an frame object. + (dump_stack_mark): Mark the free list. + + gpgscm: Merge opexe_0. + + commit df499c6ee5edf0a560138640141a3abef360b4f5 + * tests/gpgscm/scheme-private.h (struct scheme): Remove field 'op'. + * tests/gpgscm/scheme.c (opexe_0): Inline into 'Eval_Cycle'. + (_Error_1): Return the opcode to evaluate next. + (Error_1): Do not return, but set the opcode and goto dispatch. + (Error_0): Likewise. + (s_goto): Likewise. + (s_return): Likewise. + (s_return_enable_gc): Likewise. + (s_thread_to): Remove superfluous cast. + (_s_return): Return the opcode to evaluate next. + (scheme_init_custom_alloc): Adapt to removal of field 'op'. + +2017-04-24 Justus Winter + + gpgscm: Refactor cell finalization. + + commit 36e266a5cbb78560d32bc33f18f9041db1ff5080 + * tests/gpgscm/scheme.c (finalize_cell): Use switch, return whether + the cell may be freed. + (gc): Update callsite. + + gpgscm: Tweak error message display. + + commit e8c896c7f9aabad6e1387f538accb54ac6b2b1cc + * tests/gpgscm/init.scm (throw'): If the first argument to the error + is a string, display it as such. + + gpgscm: Fix test. + + commit b67d1a3f36f2b15fb75de613942668b71cad1bd7 + * tests/gpgscm/t-child.scm: Use 'string-length' on the string. + + gpgscm: Improve syntax checking. + + commit 008894eff46724d60a24879d319b427606fcafd1 + * tests/gpgscm/scheme.c (opexe_0): Make sure closure arguments are + symbols. + + gpgscm: Emit JUnit-style XML reports. + + commit 5dc43e579ef4340c668fa7e294f5a69fef9d622e + * tests/gpgscm/Makefile.am (EXTRA_DIST): Add new file. + * tests/gpgscm/lib.scm (string-translate): New function. + * tests/gpgscm/main.c (main): Load new file. + * tests/gpgscm/tests.scm (dirname): New function. + (test-pool): Record execution times, emit XML report. + (test): Record execution times, record log file name, emit XML report. + (run-tests-parallel): Write XML report. + (run-tests-sequential): Likewise. + * tests/gpgscm/xml.scm: New file. + * tests/gpgme/Makefile.am (CLEANFILES): Add 'report.xml'. + * tests/gpgsm/Makefile.am: Likewise. + * tests/migrations/Makefile.am: Likewise. + * tests/openpgp/Makefile.am: Likewise. + + gpgscm: Make logging less verbose and more useful. + + commit a3e51fab6b30774959dc7d4d3409000fdbe1f7b3 + * tests/gpgscm/tests.scm (call-with-io): When being verbose, include + the pid in the output, and avoid duplicating the command arguments. + + gpgscm: Make test framework less functional. + + commit aa843dbcd32c65eeac8c7c3cea4efb3ed7a94a0c + * tests/gpgscm/tests.scm (test-pool, tests): Previously, these methods + updated objects by creating new updated copies of the object being + manipulated. This made the code awkward without any benefit, + therefore I change it to just update the object. + + gpgscm: Move 'trace' and 'stringify'. + + commit 763bd518b27d4e125fa3dce64417ae2aca2101d4 + * tests/gpgscm/tests.scm (trace, stringify): Move... + * tests/gpgscm/lib.scm: ... here. + + gpgscm: Avoid fruitless garbage collection cycles. + + commit 8bda9387d5be9193fd0f484fd1272367a7422389 + * tests/gpgscm/scheme-private.h (CELL_MINRECOVER): New macro. + * tests/gpgscm/scheme.c (_get_cell): Move the heuristic to get more + cells... + (gc): ... here where every caller benefits from the optimization. + +2017-04-19 NIIBE Yutaka + + Minor clean up. + + commit a8d267a7220399f7acf69723fe1d31efd2160319 + * src/b64dec.c (_gpgrt_b64dec_proc): Add a comment. + * src/estream.c (_gpgrt_fread, _gpgrt_fwrite): Use &&. + * src/mkheader.c (xstrdup): Use memcpy as we know length. + +2017-04-12 NIIBE Yutaka + + gpgscm: Fix test program. + + commit e71c0d39d2fb896df85949a61811e3b19fd050d7 + * tests/gpgscm/t-child.c (main): Fix for setmode. + +2017-04-11 Justus Winter + + tests: Fix distcheck. + + commit b03bcee96fc4eb950c6ae38fd8b5af831b281f02 + * tests/gpgscm/Makefile.am (EXTRA_DIST): Add 'gnupg.scm'. + + tests: Move common functionality. + + commit d9dd8135ec6e1a4b7a66bc385714b8c1beba3e96 + * tests/openpgp/defs.scm (with-home-directory, + with-ephemeral-home-directory): Move... + * tests/gpgscm/gnupg.scm: ... to this new file. + * tests/gpgscm/main.c (main): Load the new file. + +2017-04-10 Justus Winter + + gpgscm: Fix opcode dispatch. + + commit afb7060de5c55976d08e0692fbffd0cc108914a0 + * tests/gpgscm/scheme.c (opexe_0): Consider 'op', not 'sc->op'. The + former is the opcode we are currently executing. + + gpgscm: Mmap script files. + + commit ef41f332cba624e9bca6100ebacd4fffe4e61679 + * tests/gpgscm/main.c (load): Try to mmap the script. + * tests/gpgscm/scheme.c (scheme_load_memory): New function, a + generalization of 'scheme_load_string'. + * tests/gpgscm/scheme.h (scheme_load_memory): New prototype. + + gpgscm: Refactor checking for opcode arguments. + + commit 6c9de8ff59a9c637de944706533421dc4cf20708 + * tests/gpgscm/scheme.c (op_code_info): Fix type, add forward + declaration. + (check_arguments): New function. + (Eval_cycle): Use the new function. + + gpgscm: Improve syntax dispatch. + + commit 173531921d133a007d30c32cec00546749d8cfbf + * tests/gpgscm/scheme.c (assign_syntax): Add opcode parameter, store + opcode in the tag. + (syntaxnum): Add sc parameter, retrieve opcode from tag. + (opexe_0): Adapt callsite. + (scheme_init_custom_alloc): Likewise. + + gpgscm: Make tags mandatory. + + commit d6c83fbb06abc99de696b3f9a0b1cb962fa05b26 + * tests/gpgscm/opdefines.h: Make tags mandatory. + * tests/gpgscm/scheme.c: Likewise. + * tests/gpgscm/scheme.h: Likewise. + + gpgscm: Add and use opcode for reversing a list in place. + + commit be78c20cdd93ed295bfee1aef1e9d2e9253b779c + * tests/gpgscm/lib.scm (string-split-pln): Use 'reverse!'. + (string-rtrim): Likewise. + * tests/gpgscm/opdefines.h (reverse!): New opcode. + * tests/gpgscm/scheme.c (opexe_0): Handle new opcode. + + gpgscm: Deduplicate code. + + commit 8a2d1706e5d4b3d33ff349838f0c51631e32a2ce + * tests/gpgscm/scheme.c (oblist_add_by_name): Deduplicate. + (new_slot_spec_in_env): Likewise. + + gpgscm: Move dispatch table into rodata. + + commit 5aeeb5af96dce901a8b21613e33baed8b9331692 + * tests/gpgscm/opdefines.h: Use 0 instead of NULL. + * tests/gpgscm/scheme.c (op_code_info): Use char arrays instead of + pointers, make arity parameters smaller. + (INF_ARG): Adapt. + (_OP_DEF): Likewise. + (dispatch_table): Likewise. + (procname): Likewise. + (Eval_cycle): Likewise. + (scheme_init_custom_alloc): Likewise. + + gpgscm: Use more threaded code. + + commit 49c22bd71892f47835d9e03f3bd3122a1f0b8faa + * tests/gpgscm/scheme.c (opexe_0): Use 's_thread_to' instead of + 's_goto' wherever possible. + + gpgscm: Remove now obsolete dispatcher function from the opcodes. + + commit 6d99d2f287aa40d8add81ce892026dfe05768fd4 + * tests/gpgscm/opdefines.h: Remove now obsolete dispatcher function + from the opcodes. + * tests/gpgscm/scheme-private.h (_OP_DEF): Adapt. + * tests/gpgscm/scheme.c (dispatch_func): Remove type declaration. + (op_code_info): Remove 'func'. + (_OP_DEF): Adapt. + (Eval_Cycle): Always call 'opexe_0'. + + gpgscm: Merge 'opexe_6'. + + commit c183d8f4c6cdf6b48265f01e4c007895f2626fc5 + * tests/gpgscm/scheme.c (opexe_6): Merge into 'opexe_0'. + * tests/gpgscm/opdefines.h: Adapt. + + gpgscm: Merge 'opexe_5'. + + commit 72674f169386d68a6d0fc2ba4bc5a065435802a0 + * tests/gpgscm/scheme.c (opexe_5): Merge into 'opexe_0'. + * tests/gpgscm/opdefines.h: Adapt. + + gpgscm: Merge 'opexe_4'. + + commit 5898ead4a99d3bc9e23859daf2cca9632d92f1f7 + * tests/gpgscm/scheme.c (opexe_4): Merge into 'opexe_0'. + * tests/gpgscm/opdefines.h: Adapt. + + gpgscm: Merge 'opexe_3'. + + commit b13610ec7bf2bf199eb22f936bc2f2d4ac240fde + * tests/gpgscm/scheme.c (opexe_3): Merge into 'opexe_0'. + * tests/gpgscm/opdefines.h: Adapt. + + gpgscm: Merge 'opexe_2'. + + commit 7bc96831c7156fa07cfd55259f309ca4fa676c2e + * tests/gpgscm/scheme.c (opexe_2): Merge into 'opexe_0'. + * tests/gpgscm/opdefines.h: Adapt. + + gpgscm: Merge 'opexe_1'. + + commit 19a1be5ac3c9f3e26c453cf2ddc6d88af19e2d43 + * tests/gpgscm/scheme.c (opexe_1): Merge into 'opexe_0'. + * tests/gpgscm/opdefines.h: Adapt. + +2017-04-07 Justus Winter + + gpgscm: Allocate small integers in the rodata section. + + commit 7cee693e31fa1196161d5fbe7149a176049735ac + * tests/gpgscm/Makefile.am (gpgscm_SOURCES): Add new file. + * tests/gpgscm/scheme-private.h (struct cell): Move number to the top + of the union so that we can initialize it. + (struct scheme): Remove 'integer_segment'. + * tests/gpgscm/scheme.c (initialize_small_integers): Remove function. + (small_integers): New variable. + (MAX_SMALL_INTEGER): Compute. + (mk_small_integer): Adapt. + (mark): Avoid marking objects already marked. This allows us to run + the algorithm over objects in the rodata section if they are already + marked. + (scheme_init_custom_alloc): Remove initialization. + (scheme_deinit): Remove deallocation. + * tests/gpgscm/small-integers.h: New file. + + gpgscm: Make global data constant when possible. + + commit 9fc4e6cbe6d5d3f2dd1c61ded15e2ad42f8f9460 + * tests/gpgscm/scheme-private.h (struct scheme): Make 'vptr' const. + * tests/gpgscm/scheme.c (num_zero): Statically initialize and turn + into constant. + (num_one): Likewise. + (charnames): Change type so that it can be stored in rodata. + (is_ascii_name): Adapt slightly. + (assign_proc): Make argument const char *. + (op_code_info): Make some fields const char *. + (tests): Make const. + (dispatch_table): Make const. At least it can be made read-only after + relocation. + (Eval_Cycle): Adapt slightly. + (vtbl): Make const. + + gpgscm: Remove arbitrary limit on number of cell segments. + + commit 961f3b3a3001384d5df1d5a9963c5f67f800cd4d + * tests/gpgscm/scheme-private.h (struct scheme): Remove fixed-size + arrays for cell segments, replace them with a pointer to the new + 'struct cell_segment' instead. + * tests/gpgscm/scheme.c (struct cell_segment): New definition. + (_alloc_cellseg): Allocate the header within the segment, return a + pointer to the header. + (_dealloc_cellseg): New function. + (alloc_cellseg): Insert the segments into a list. + (_get_cell): Allocate a new segment if less than a quarter of + CELL_SIGSIZE is recovered during garbage collection. + (initialize_small_integers): Adapt callsite. + (gc): Walk the list of segments. + (scheme_init_custom_alloc): Remove initialization of removed field. + (scheme_deinit): Adapt deallocation. + + gpgscm: Fix compact vector encoding. + + commit a493ad44b6a67026aeae08d25575fee8c0f137b4 + * tests/gpgscm/scheme-private.h (struct cell): Use uintptr_t for + '_flags'. This way, '_flags' has the size of a machine word. + +2017-04-06 Justus Winter + + gpgscm: Avoid mutating integer. + + commit 00de0fd1cebd89330765470bbb6e1e8bf5f3dfc9 + * tests/gpgscm/scheme.c (opexe_5): Do not modify the integer in-place + while printing an vector. Integer objects may be shared, so they must + not be mutated. + + gpgscm: Initialize unused slots in vectors. + + commit 54ea82c2e7e5700b9644c663142c2d46441a3f4e + * tests/gpgscm/scheme.c (get_vector_object): Initialize unused slots + at the end of vectors. + +2017-04-04 Justus Winter + + gpgscm: Fix copying values. + + commit 52d0423e48dfe4dd51dc0acbf119431701280a70 + * tests/gpgscm/scheme.c (copy_value): New function. + (mk_tagged_value): Use new function. + (opexe_4): Likewise for OP_SAVE_FORCED. + + gpgscm: Simplify get-output-string operation. + + commit c9244b2eb43e0f06928b709ac35127966e1d24ce + * tests/gpgscm/scheme.c (opexe_4): Simplify 'get-output-string'. + + gpgscm: Simplify substring operation. + + commit 6900f118303962262923f9d103b802508d5f469f + * tests/gpgscm/scheme.c (opexe_2): Simplify 'substring'. + +2017-04-03 Justus Winter + + gpgscm: Slightly improve the procedure dispatch. + + commit 9a4283ed6aafc1e43d8f7a5fd9cef6118615f284 + * tests/gpgscm/scheme.c (procnum): Procedures always have an integer + number, so we can safely use the cheaper 'ivalue_unchecked'. + +2017-03-23 Justus Winter + + gpgscm: Make test cleanup more robust. + + commit e1780b2f981d3fd48bbf2672b35f2f33152f6c32 + * tests/gpgscm/tests.scm (mkdtemp-autoremove): New function that + cleans up at interpreter shutdown. + (run-tests-parallel): Use the new function. + (run-tests-sequential): Likewise. + (make-environment-cache): Execute setup with an temporary working + directory. + +2017-03-21 Justus Winter + + tests,w32: Use GetTempPath to get the path for temporary files. + + commit 8835ee681f5ae92ded982b51f5808935d227b126 + * tests/gpgscm/ffi.c (do_get_temp_path): New function. + (ffi_init): Make function available. + * tests/gpgscm/tests.scm (mkdtemp): Use the new function. + + tests: Create temporary directories in '/tmp'. + + commit cfc49428a427d1a140424c687cb45ba00117d443 + * tests/gpgscm/tests.scm (mkdtemp): Create temporary directories in + '/tmp' on UNIX, or in '%Temp' on Windows. + * tests/migrations/common.scm (run-test): Turn error into a warning. + * tests/openpgp/defs.scm (start-agent): Likewise. + +2017-03-17 Justus Winter + + gpgscm: Simplify hash tables. + + commit 053a3f9a61a2918131b9dec60149b93861c04a51 + * tests/gpgscm/scheme.c (oblist_add_by_name): We now always get a + slot. Simplify accordingly. + (oblist_find_by_name): Always return the slot. + (vector_elem_slot): New function. + (new_slot_spec_in_env): We now always get a slot. Remove parameter + 'env'. Simplify accordingly. + (find_slot_spec_in_env): Always return a slot. + (new_slot_in_env): Adapt callsite. + (opexe_0): Likewise. + (opexe_1): Likewise. + (scheme_define): Likewise. + + gpgscm: Remove framework for immediate values. + + commit a1ed4b6ab25f28114d8ba6f704824a456d4fdc0c + * tests/gpgscm/scheme.c (IMMEDIATE_TAG): Remove macro. + (is_immediate): Likewise. + (set_immediate): Likewise. + (clr_immediate): Likewise. + (enum scheme_types): Set the LSB in every value. + (fill_vector): Adapt. + (vector_elem): Likewise. + (set_vector_elem): Likewise. + (mark): Likewise. + (gc): Test for the LSB to tell typeflags apart from pointers stored in + the same memory location. + +2017-03-09 Justus Winter + + tests: Rework environment setup. + + commit 14fcdcabb25d975f0f91be86b0571694fb533e7a + * tests/gpgscm/tests.scm (test::scm): Add a setup argument. + (test::binary): Likewise. + (run-tests-parallel): Remove setup parameter. + (run-tests-sequential): Likewise. + (make-environment-cache): New function that handles the cache + protocol. + * tests/gpgme/run-tests.scm: Adapt accordingly. + * tests/gpgsm/run-tests.scm: Likewise. + * tests/migrations/run-tests.scm: Likewise. + * tests/openpgp/run-tests.scm: Likewise. + +2017-03-08 Justus Winter + + build: Use macOS' compatibility macros to enable all features. + + commit 5e51b642f747547c737a7abbc37e65b0f630d188 + * configure.ac: On macOS, use the compatibility macros to expose every + feature of the libc. This is the equivalent of _GNU_SOURCE on GNU + libc. + +2017-03-07 Michael Haubenwallner + + gpgscm: Use system strlwr if available. + + commit ca3d31ec77612cecc16c376ac7c06ce09541b28e + * tests/gpgscm/scheme.c: Define local strlwr only when HAVE_STRLWR is + not defined in config.h. + * tests/gpgscm/scheme-config.h: Remove hack. + +2017-03-07 NIIBE Yutaka + + More change for common. + + commit d372378d28b2504225aae6819d056330e7ac0674 + * g10, scd, test, tools: Follow the change of removal of -Icommon. + + w32: Conditionalize ISO 2022 definitions. + + commit 1126c4c117a47c8ea8435ac11561d51b13f538dd + * src/w32-iconv.c (iso2022_SI_seq, iso2022_SO_seq) [USE_MLANG_DLL]: + Only for USE_MLANG_DLL. + +2017-03-06 Justus Winter + + tests: Harmonize temporary and socket directory handling. + + commit 490c5d5afeaae66dc061295afbc254e57abd20c8 + * tests/gpgscm/tests.scm (mkdtemp): Do not magically obey the + environment variable 'TMP', make sure to always return an absolute + path. + * tests/gpgme/Makefile.am (TMP): Drop variable. + (TESTS_ENVIRONMENT): Drop 'TMP'. + * tests/gpgme/gpgme-defs.scm (create-gpgmehome): Start the agent. Do + not create private key store, the agent does that for us. + * tests/gpgsm/Makefile.am (TMP): Drop variable. + (TESTS_ENVIRONMENT): Drop 'TMP'. + * tests/gpgme/gpgme-defs.scm (create-gpgsmhome): Start the agent. Do + not create private key store, the agent does that for us. + * tests/migrations/Makefile.am (TMP): Drop variable. + (TESTS_ENVIRONMENT): Drop 'TMP'. + * tests/migrations/common.scm (gpgconf): New variable. + (run-test): Create and remove socket directory. + * tests/migrations/extended-pkf.scm (src-tarball): Remove variable. + (setup): Remove function. + (trigger-migration): Likewise. + Use 'run-test' to execute the test. + * tests/migrations/from-classic.scm (src-tarball): Remove variable. + (setup): Remove function. + Use 'run-test' to execute the tests. + * tests/openpgp/Makefile.am (TMP): Drop variable. + (TESTS_ENVIRONMENT): Drop 'TMP'. + * tests/openpgp/README: Do not mention 'TMP'. + * tests/openpgp/defs.scm (with-home-directory): New macro. + (create-legacy-gpghome): Do not create private key store, the agent + does that for us. + (start-agent): Make sure to terminate the right agent with 'atexit'. + + gpgscm: Fix creation of temporary directories. + + commit 9e29af900544fe4210a72cae87be78186d03e231 + * tests/gpgscm/ffi.c (do_mkdtemp): Use a larger buffer for the + template. + +2017-02-28 Justus Winter + + gpgscm: Improve parsing. + + commit 9467f3c7758864f3c025c14166c9d099bea6fe62 + * tests/gpgscm/scheme.c (port_increment_current_line): Avoid creating + the same integer if the delta is zero. This happens a lot during + parsing, and puts pressure on the memory allocator. + + gpgscm: Fix calculating the line number. + + commit 08e1cfddc94a6aae79b21d7795accf3e100a1f2f + * tests/gpgscm/scheme.c (opexe_5): Only increment the line number on + newlines. + +2017-02-28 Werner Koch + + Release 1.27. + + commit c1668f61c58ea6f0439e5193d83b4e2ac622b286 + * configure.ac: Bump LT version to C22/A22/R0. + + Add support for armv7-unknown-linux-gnueabihf. + + commit 8d45ec8f8f61268a74d9c40b840a8fbd6f805a07 + * src/syscfg/lock-obj-pub.arm-unknown-linux-gnueabihf.h: Remove. + * src/syscfg/lock-obj-pub.armv5-unknown-linux-musleabi.h: Remove. + * src/syscfg/lock-obj-pub.armv6-unknown-linux-musleabihf.h: Remove. + * src/Makefile.am (lock_obj_pub): Remove them. + * src/mkheader.c (canon_host_triplet): Add removed as aliases. Addn + alias for armv7-unknown-linux-gnueabihf. + + New public header gpgrt.h as alias for gpg-error.h. + + commit 012f1bdc87e9969131c72c5575af0851484a2196 + * src/gpg-error.h.in (GPGRT_H): New double include protection. + * src/Makefile.am (nodist_include_HEADERS): Add gpgrt.h. + (BUILT_SOURCES): Ditto. + (CLEANFILES): Ditto. + (gpgrt.h): New rule. + + tests: New option --debug for t-poll. + + commit f141fdee4015d36aec2122853ef55f3ae42197da + * tests/t-poll.c (test_poll): Add option. + + Improve tracing of estream. + + commit f27e516aabd27afeddecfde197eae1fd21a11395 + * src/gpgrt-int.h (trace_errno): Add new parameter. Adjust all users. + * src/init.c (trace_fp, trace_with_errno, trace_missing_lf) + (trace_prefix_done): New vars. + (_gpgrt_internal_trace_begin): Add arg WITH_ERRNO. Open a trace file + on first use. Init new vars. + (print_internal_trace_prefix): New. + * src/estream.c, src/w32-estream.c: Improve tracing. + +2017-02-28 Justus Winter + + gpgscm: Track source locations in every kind of ports. + + commit 9b23e71a6b41cd11b39ab1e1d18c140eaf63c3e7 + * tests/gpgscm/scheme-private.h (struct port): Move location + information out of the union. + * tests/gpgscm/scheme.c (mark): All ports need marking now. + (gc): Likewise all ports on the load stack. + (port_clear_location): Adapt accordingly. Also, add an empty function + for !SHOW_ERROR_LINE. + (port_increment_current_line): Likewise. + (port_reset_current_line): Drop function in favor of... + (port_init_location): ... this new function. + (file_push): Simplify. + (file_pop): Likewise. + (port_rep_from_filename): Likewise. + (port_rep_from_file): Likewise. + (port_rep_from_string): Also initialize the location. + (port_rep_from_scratch): Likewise. + (port_close): Simplify and generalize. + (skipspace): Likewise. + (token): Likewise. + (_Error_1): Generalize. + (opexe_5): Likewise. + (scheme_deinit): Simplify and generalize. + (scheme_load_named_file): Likewise. + (scheme_load_string): Also initialize the location. + +2017-02-28 Werner Koch + + w32: Fix gpgrt_poll for Windows. + + commit 07d5bd918d2185f79c7d61d56ee7f3090b6f5dcd + * src/estream.c (_gpgrt_poll) [W32]: Do not call the syscall clamp. + +2017-02-27 Werner Koch + + Use the new tracing ramework for estream. + + commit 84aaa84d41f17d6f5e2bb31930e101568df554e2 + * src/estream.c: Add trace calls to some functions. + * src/w32-estream.c: Replace existing trace calls by the new + framework. + + Add a tracing framework. + + commit a52f12cc1879d171ddf309b5ac461bab06c8b5e2 + * src/init.c (trace_save_errno, trace_arg_module) + (trace_arg_file, trace_arg_line): New module vars. + (do_internal_trace): New. + (_gpgrt_internal_trace_printf): New. + (_gpgrt_internal_trace): New. + (_gpgrt_internal_trace_errno): New. + (_gpgrt_internal_trace_end): New. + * src/gpgrt-int.h (trace): New macro. + (trace_errno): New macro. + (trace_start): New macro. + (trace_append): New macro. + (trace_finish): New macro. + +2017-02-26 Werner Koch + + Rename internal functions of estream. + + commit be49b02a56e8b405eeb0c07c80eb24e71e841b4a + * src/estream.c (_gpgrt_es_init): Rename to _gpgrt_estream_init. + (es_fill): Rename to fill_stream. + (es_fflush): Rename to flush_stream. + (es_deinitialize): Rename to deinit_stream_obj. + (es_create): Rename to create_stream + (es_read_nbf): Rename to do_read_nbf. + (es_read_lbf): Rename to do_read_lbf. + (es_read_fbf): Rename to do_read_fbf. + (es_peek): Rename to peek_stream. + (es_skip): Rename to skip_stream. + (es_print): Rename to do_print_stream. + +2017-02-24 Werner Koch + + w32: Do not use the syscall clamps in pollable mode. + + commit 915e1bf2ad1b23239b17843755376344e59a3110 + * src/estream.c (estream_cookie_w32): Add flag no_syscall_clamp. + (func_w32_create): Add arg no_syscall_clamp. + (func_w32_read): Do not call pre/post_syscall_clamp when flag is set. + (func_w32_write): Ditto. + (func_w32_seek): Ditto. + (do_w32open): Set NO_SYSCALL_CLAMP in pollable mode. + (es_create) [W32]: Make sure that pollable-mode is unly used with the + W32 backend. + +2017-02-23 Werner Koch + + w32: Replace gpgrt locks in w32-streams by native critical sections. + + commit c9e44c92e08187626e878d826cdedf4cd4e931fe + * src/w32-estream.c (TRACE_ERR): Also print the error number. This is + in particular useful on non-english systems. + (reader_context_s, writer_context_s): Replace the gpgrt mutex by a + native critical section. Change all calls to gpgrt_lock_ fucntions by + the EnterCriticalSection et al. + (_gpgrt_w32_poll): Make CODE unsigned which is what WFMO returns. + Remove the then useless condition. + +2017-02-19 Werner Koch + + New error code GPG_ERR_INV_NAME. + + commit 3a2ee6df5911728938a2fb56237b08f790841a0c + + +2017-02-17 Justus Winter + + gpgscm: Guard use of tagged expressions. + + commit 86082852350810afa548c607241df95f9cac777a + * tests/gpgscm/init.scm (vm-history-print): Check that the tag added + to expressions when parsing source files matches the expected format. + * tests/gpgscm/lib.scm (assert): Likewise. + +2017-02-15 Justus Winter + + tests,build: Fix distcheck. + + commit 52748cd96c70c9da01c35de10dd1627f7897d085 + * tests/gpgscm/Makefile.am (EXTRA_DIST): Add 'time.scm'. + + tests: Check expiration times of created keys. + + commit b2db15dfe894a27246236ed416c8e2c2fc0e73c4 + * tests/gpgscm/ffi.c (do_get_time): New function. + (ffi_init): Expose new function. + * tests/gpgscm/ffi.scm (get-time): Document new function. + * tests/gpgscm/time.scm: New file. + * tests/openpgp/quick-key-manipulation.scm: Use the new facilities to + check the expiration times of created keys. + * tests/openpgp/tofu.scm: Use the new module. + +2017-02-02 NIIBE Yutaka + + syscfg: Add a sh3 architecture. + + commit 67e51f9957f875ca854f25f4a9a63aeb831c55c4 + * src/syscfg/lock-obj-pub.sh3-unknown-linux-gnu.h: New. + * src/Makefile.am (lock_obj_pub): Add it. + +2017-02-01 NIIBE Yutaka + + Add Base64 decoder. + + commit 4bfc2117b70415a5c5d3f0a0ac9086e168350d83 + * NEWS: Add interface changes. + * src/Makefile.am (libgpg_error_la_SOURCES): Add b64dec.c. + * src/b64dec.c: New. Taken from gpgme. Prefix function names with + _gpgrt_. Change API a bit, not exposing the structure. + * src/gpg-error.def.in: Export Base64 functions. + * src/gpg-error.vers: Likewise. + * src/visibility.c, src/visibility.h: Likewise. + * src/gpg-error.h.in: Add Base64 struct and functions. + * src/gpgrt-int.h: Add Base64 internal functions. + * tests/Makefile.am (TESTS): Add t-b64dec. + * tests/t-b64dec.c: New. + +2017-01-31 Justus Winter + + gpgscm: Tune the hash tables. + + commit 1c99db04ed62d395c1c88171ef147a580e0bb4ab + * tests/gpgscm/scheme.c (oblist_initial_value): Increase the size of + the hash table based on the number of symbols used after initializing + the interpreter. + (new_frame_in_env): Increase the size of the hash table based on the + number of variables in the global environement. + + gpgscm: Optimize environment lookups and insertions. + + commit fa2363d9d903dfc9885f7d2f290fb4d7738bb737 + * tests/gpgscm/scheme.c (pointercmp): New function. + (new_slot_spec_in_env): Add and use slot for insertions. + (find_slot_spec_in_env): New variant of 'find_slot_in_env' that + returns the slot on failures. + (find_slot_in_env): Express using the new function. + (new_slot_in_env): Update callsite. + (opexe_0): Optimize lookup-or-insert. + (opexe_1): Likewise. + (scheme_define): Likewise. + + gpgscm: Fix build with list environments. + + commit e982432ba66652bc9bc16e334e1d4d184e1b68bd + * tests/gpgscm/scheme.c (new_slot_spec_in_env): Provide preallocation + inforomation if USE_ALIST_ENV. + + gpgscm: Optimize symbol lookups and insertions. + + commit d374a1271326e503bd7cabe11cf5fd10a970d9fc + * tests/gpgscm/scheme.c (oblist_find_by_name): Keep the list of + symbols sorted, return the slot where a new symbol must be inserted on + lookup failures. + (oblist_add_by_name): Add the new symbol at the given slot. + (mk_symbol): Adjust callsite. + (gensym): Likewise. + (assign_syntax): Likewise. + + gpgscm: Fix build with object list. + + commit 85f6f60197fe56c90b663fb34db4cddf62c28c1b + * tests/gpgscm/scheme.c (oblist_add_by_name): Provide preallocation + information if USE_OBJECT_LIST. + + gpgscm: Remove unused functions. + + commit 92e929d4b91cbb5e36d6cb89aabf2211a7185a65 + * tests/gpgscm/scheme.c (check_cell_alloced): Remove function. + (check_range_alloced): Likewise. + +2017-01-30 Justus Winter + + gpgscm: Use a compact vector representation. + + commit 5809edef40acf1f8f0e71b69dcb10e1d5464f2a5 + * tests/gpgscm/scheme-private.h (struct cell): Add a compact vector + representation. + * tests/gpgscm/scheme.c (vector_length): Use new representation. + (vector_size): New macro. + (get_vector_object): Use the new representation. + (fill_vector): Likewise. + (vector_elem): Likewise. + (set_vector_elem): Likewise. + (mark): Likewise. + (gc): Likewise. Be careful not to confuse immediate values for type + flags. + (finalize_cell): Vectors now require finalization. + + gpgscm: Provide framework for immediate values. + + commit e1dc204ac465498436f463d419b9583011026807 + * tests/gpgscm/scheme.c (IMMEDIATE_TAG): New macro. + ({is,set,clr}_immediate): Likewise. + (enum scheme_types): Make type tags disjoint from immediate values. + (TYPE_BITS): We need one more bit now. + (ADJ,T_MASKTYPE): Compute values. + + gpgscm: Fix setting the line of the first gc reservation. + + commit c587e6a038fc532df064eec7bea2ad1db31238ad + * tests/gpgscm/scheme.c (_gc_disable): Negate guard. + + gpgscm: Introduce macro for the vector length. + + commit e2caaa957b56f20cfe09bc6ca5a595b37a860b51 + * tests/gpgscm/scheme.c (vector_length): New macro. + (get_vector_object): Use the new macro. + (oblist_add_by_name): Likewise. + (oblist_find_by_name): Likewise. + (oblist_all_symbols): Likewise. + (mk_vector): Likewise. + (mark): Likewise. + (new_slot_spec_in_env): Likewise. + (find_slot_spec_in_env): Likewise. + (opexe_2): Likewise. + (opexe_5): Likewise. + +2017-01-19 Werner Koch + + estream: Correctly set ERRNO to EOPNOTSUPP. + + commit 55c497904dd0794ca5cfcafe369943736b0d4e62 + * src/estream.c (es_flush, es_write_nbf): Fix setting of ERRNO to + EOPNOTSUPP. + +2017-01-17 Werner Koch + + build: Modernize autogen.sh. + + commit 66275ac5b8db9d83a72b5497eec4e6d9ac3b4e65 + * autogen.sh: Update from GnuPG. + * autogen.rc (version_parts): New. + * configure.ac: Change to use autogen.sh --find-version helper. + * Makefile.am (dist-hook): Do not create VERSION + (EXTRA_DIST): Add VERSION. + +2017-01-10 Daniel Kahn Gillmor + + doc,configure: Be consistent about preferring --with-libgpg-error-prefix + + commit 19de4cef279272d3969e36dd8cd2fa05a7bf5276 + * doc/gpgrt.texi: Say "--with-libgpg-error-prefix" instead of + "--with-gpg-error-prefix". + * src/gpg-error.m4: When warning about library locations, warn with + the preferred "--with-libgpg-error-prefix" name. + +2017-01-03 Werner Koch + + Fix macro GPGRT_GCC_VERSION. + + commit 704c31992e8716bbe61e6d5751e125a64badeef0 + * src/gpg-error.h.in (GPGRT_GCC_VERSION): Fix. + +2017-01-02 Justus Winter + + gpgscm: Fail if too many arguments are given. + + commit 56787d898a6911e62b35c3054a22df1a913c26cf + * tests/gpgscm/scheme.c (opexe_0): Enable check. + * tests/gpgscm/tests.scm (test::report): Remove superfluous argument. + + gpgscm: Add 'finally', rework all macros. + + commit 7d95db002aac773e596c551b8fcba2d983244495 + * tests/gpgscm/init.scm (finally): New macro. + * tests/gpgscm/tests.scm (letfd): Rewrite. + (with-working-directory): Likewise. + (with-temporary-working-directory): Likewise. + (lettmp): Likewise. + + gpgscm: Use boxed values for source locations. + + commit 4165c9303d894179c0da3a1b12316d3df8d4ce82 + * tests/gpgscm/scheme-private.h (struct port): Use boxed values for + filename and current line. This allows us to use the same Scheme + object for labeling all expressions in a file. + * tests/gpgscm/scheme.c (file_push): Use boxed type for filename. + (mark): Mark location objects of port objects. + (gc): Mark location objects in the load stack. + (port_clear_location): New function. + (port_reset_current_line): Likewise. + (port_increment_current_line): Likewise. + (file_pop): Adapt accordingly. + (port_rep_from_filename): Likewise. + (port_rep_from_file): Likewise. + (port_close): Likewise. + (skipspace): Likewise. + (token): Likewise. + (_Error_1): Likewise. + (opexe_0): Likewise. + (opexe_5): Likewise. + (scheme_deinit): Likewise. + (scheme_load_file): Likewise. + (scheme_load_named_file): Likewise. + +2016-12-21 Justus Winter + + gpgscm: Guard use of union member. + + commit aa6b3449bf1b42703b4c6466d87f91620743a5d2 + * tests/gpgscm/scheme.c (opexe_5): Check that we have a file port + before accessing filename. Fixes a crash on 32-bit architectures. + +2016-12-21 Werner Koch + + Release 1.26. + + commit 82266defa39901ec9f97533623af5638a35e5a77 + * configure.ac: Bump LT version to C21/A21/R0. + +2016-12-20 Justus Winter + + tests: Move argument parser. + + commit 5f16dec938ac6e337c6ff72981285385d75ec455 + * tests/gpgme/gpgme-defs.scm (flag): Move... + * tests/gpgscm/tests.scm: ... over here. + +2016-12-19 Justus Winter + + gpgscm: Change associativity of ::. + + commit 3ae0b5d9af063e7af03558be2bf8f32e5bb4e5cd + * tests/gpgscm/scheme.c (mk_atom): Change associativity of the :: + infix-operator. This makes it possible to naturally express accessing + nested structures (e.g. a::b::c). + + gpgscm: Display location when assertions fail. + + commit b852ac097f3dfe4e62c3d27e18a22f1b9f704530 + * tests/gpgscm/lib.scm (assert): Use location information if + available. + + gpgscm: Make exception handling more robust. + + commit 5221e0b2a3bd2dbb4f997e3c2118b176e10e116e + * tests/gpgscm/init.scm (throw'): Check that args is a list. + +2016-12-13 Justus Winter + + gpgscm: Print failed and skipped tests. + + commit e8c5871609dd3ff3b2aa3d21ab5c3651ba683ed7 + * tests/gpgscm/tests.scm (test-pool::report): Print failed and skipped + tests at the end. + + gpgscm: Generalize the test runner. + + commit b1e67a725d17ff1605ba79d8bb61f37c4a48f0a5 + * tests/gpgscm/tests.scm (test::scm) Add explicit name argument. + (test::binary): Likewise. Also, add missing unquote. + * tests/openpgp/run-tests.scm: Adapt accordingly. + + gpgscm: Move the test runner to the Scheme library. + + commit 0031a4d4d8a1851f0c32ad1af2f42f59bd016001 + * tests/openpgp/run-tests.scm: Move most of the code... + * tests/gpgscm/tests.scm: ... here. + + gpgscm: Improve library functions. + + commit f745dcab2b1789c8f64c2be4b5dcc7322212e1d2 + * tests/gpgscm/tests.scm (absolute-path?): New function. + (canonical-path): Use the new function. + * tests/gpgscm/lib.scm (string-split-pln): New function. + (string-indexp, string-splitp): Likewise. + (string-splitn): Express using the above function. + (string-ltrim, string-rtrim): Fix corner case. + (list->string-reversed): New function. + (read-line): Fix performance. + +2016-12-13 Werner Koch + + New error code GPG_ERR_TRY_LATER. + + commit f02a657f0129b30700b2f36956ee37b40cc2da82 + + +2016-12-12 Werner Koch + + New error code GPG_ERR_DNS_TIMEOUT. + + commit 90b4dfad438900c7808b8c2995ba984fa3587bb2 + + + New error codes to support libdns. + + commit 56ab574c28586fccd95a08acdc9ee4962ab0db50 + + +2016-12-08 Justus Winter + + gpgscm: Better error reporting. + + commit 735c66bd2d5672de8cc7573fe9d6af4615b86fe2 + * tests/gpgscm/ffi.scm: Move the customized exception handling and + atexit logic... + * tests/gpgscm/init.scm: ... here. + (throw): Record the current history. + (throw'): New function that is history-aware. + (rethrow): New function. + (*error-hook*): Use the new throw'. + * tests/gpgscm/main.c (load): Fix error handling. + (main): Save and use the 'sc->retcode' as exit code. + * tests/gpgscm/repl.scm (repl): Print call history. + * tests/gpgscm/scheme.c (_Error_1): Make a snapshot of the history, + use it to provide a accurate location of the expression causing the + error at runtime, and hand the history trace to the '*error-hook*'. + (opexe_5): Tag all lists at parse time with the current location. + * tests/gpgscm/tests.scm: Update calls to 'throw', use 'rethrow'. + + gpgscm: Keep a history of calls for error messages. + + commit 81c95b26e769a1ed4933fdf598a3df42d0416928 + * tests/gpgscm/init.scm (vm-history-print): New function. + * tests/gpgscm/opdefines.h: New opcodes 'CALLSTACK_POP', 'APPLY_CODE', + and 'VM_HISTORY'. + * tests/gpgscm/scheme-private.h (struct history): New definition. + (struct scheme): New field 'history'. + * tests/gpgscm/scheme.c (gc): Mark objects in the history. + (history_free): New function. + (history_init): Likewise. + (history_mark): Likewise. + (add_mod): New macro. + (sub_mod): Likewise. + (tailstack_clear): New function. + (callstack_pop): Likewise. + (callstack_push): Likewise. + (tailstack_push): Likewise. + (tailstack_flatten): Likewise. + (callstack_flatten): Likewise. + (history_flatten): Likewise. + (opexe_0): New variable 'callsite', keep track of the expression if it + is a call, implement the new opcodes, record function applications in + the history. + (opexe_6): Implement new opcode. + (scheme_init_custom_alloc): Initialize history. + (scheme_deinit): Free history. + * tests/gpgscm/scheme.h (USE_HISTORY): New macro. + + gpgscm: Add flag TAIL_CONTEXT. + + commit 83175b317dccceb149906cda721aa33178797f3e + * tests/gpgscm/scheme.c (S_FLAG_TAIL_CONTEXT): New macro. This flag + indicates that the interpreter is evaluating an expression in a tail + context (see R5RS, section 3.5). + (opexe_0): Clear and set the flag according to the rules layed out in + R5RS, section 3.5. + (opexe_1): Likewise. + + gpgscm: Add flags to the interpreter. + + commit 14d9ea4bd43e077fab4c756b513557cad76aacd2 + * tests/gpgscm/scheme-private.h (struct scheme): Add field 'flags'. + * tests/gpgscm/scheme.c (S_OP_MASK): New macro. + (S_FLAG_MASK, s_set_flag, s_clear_flag, s_get_flag): Likewise. + (_s_return): Unpack the encoded opcode and flags. + (s_save): Encode the flags along with the opcode. Use normal + integers to encode the result. + (scheme_init_custom_alloc): Initialize 'op' and 'flags'. + + gpgscm: Implement tags. + + commit 88753eea0d9b1ea40a46f3b3969d418ba75cccf9 + * tests/gpgscm/opdefines.h: Add opcodes to create and retrieve tags. + * tests/gpgscm/scheme.c (T_TAGGED): New macro. + (mk_tagged_value): New function. + (has_tag): Likewise. + (get_tag): Likewise. + (mark): Mark tag. + (opexe_4): Implement new opcodes. + * tests/gpgscm/scheme.h (USE_TAGS): New macro. + + gpgscm: Generalize 'for-each-p'. + + commit 94e8811cb2fd0cb56b330a811d13075d54681e38 + * tests/gpgscm/tests.scm (for-each-p): Generalize to N lists like + for-each. + (for-each-p'): Likewise. + +2016-12-06 Justus Winter + + tests: Rename 'error' to 'fail'. + + commit 85613efd8d49b39c1310d84484cb1647db83b4d5 + * tests/gpgscm/tests.scm (error): Rename to 'fail'. 'error' is a + primitive function (an opcode) of the TinySCHEME vm, and 'error' is + also defined by R6RS. Better avoid redefining that. Fix all call + sites. + * tests/openpgp/4gb-packet.scm: Adapt. + * tests/openpgp/decrypt-multifile.scm: Likewise. + * tests/openpgp/ecc.scm: Likewise. + * tests/openpgp/export.scm: Likewise. + * tests/openpgp/gpgtar.scm: Likewise. + * tests/openpgp/gpgv-forged-keyring.scm: Likewise. + * tests/openpgp/import.scm: Likewise. + * tests/openpgp/issue2015.scm: Likewise. + * tests/openpgp/issue2346.scm: Likewise. + * tests/openpgp/issue2419.scm: Likewise. + * tests/openpgp/key-selection.scm: Likewise. + * tests/openpgp/mds.scm: Likewise. + * tests/openpgp/multisig.scm: Likewise. + * tests/openpgp/setup.scm: Likewise. + * tests/openpgp/signencrypt.scm: Likewise. + * tests/openpgp/ssh-import.scm: Likewise. + * tests/openpgp/tofu.scm: Likewise. + * tests/openpgp/verify.scm: Likewise. + +2016-12-06 Neal H. Walfield + + tests: Change (interactive-shell) to start an interactive shell. + + commit 0d27b63f35c1e3a36631874fd111d3df2a1d51db + * tests/gpgscm/tests.scm (interactive-shell): Start an interactive + shell. + +2016-12-02 Werner Koch + + Fix NULL segv in new option --desc. + + commit 140a19617c78d5f0e2ac8d7e2c8e7092862ec2fb + * src/gpg-error.c (print_desc): Shortcur for unknown symbols. + + New error code GPG_ERR_INV_FLAG. + + commit c761c981b38741421d13bb7102b1ea7625d2d639 + + + New option --desc for gpg-error. + + commit b462d603f5110842489edce9e01e4ea40ac05cba + * doc/errorref.txt: Remove all tabs. + * doc/Makefile.am (install-data-local): New to install errorref.txt. + (uninstall-local): New. + (errorref.txt.x): New. + * src/Makefile.am (gpg_error_CPPFLAGS): Define PKGDATADIR + * src/gpg-error.c (print_desc): New. + (show_usage): New. + (main): Improve option parser. Add new option --desc. Call + print_desc. + +2016-11-29 Justus Winter + + gpgscm: Avoid truncating pointers. + + commit 941c0efdf826717aae88ea448ec60801f74bb476 + * tests/gpgscm/scheme.c (_alloc_cellseg): Avoid truncating pointers on + systems where sizeof(unsigned long) < sizeof(void *). + +2016-11-23 Justus Winter + + gpgscm: Make 'reverse' compatible with 'reverse_in_place'. + + commit 7f7869357cae0f75c5976ece12a1d94a659b904a + * tests/gpgscm/scheme.c (reverse): Update prototype, add terminator + argument. + (opexe_4): Update callsite. + + gpgscm: Clean sweeped cells. + + commit a078d448415c74ee5169d548a901d27380d933f3 + * tests/gpgscm/scheme.c (gc): Zero typeflag and car of free cells. + + gpgscm: Fix initialization of 'sink'. + + commit 95db0d64ac0ccab6cf0e6d6ec25251ccb0fab9d3 + * tests/gpgscm/scheme.c (scheme_init_custom_alloc): Also initialize + cdr. + +2016-11-22 Justus Winter + + gpgscm: Refactor. + + commit b18458f3dfd53627994783d0f2ad835ae70a05af + * tests/gpgscm/scheme.c (opexe_0): Reduce code duplication. + + gpgscm: Fix property lists. + + commit 08f16887de9d6f6dcb0b7a377407dbd4f541fe13 + * tests/gpgscm/opdefines.h (put, get): Check arguments. Also rename + to 'set-symbol-property' and 'symbol-property', the names used by + Guile, because put and get are too unspecific. + * tests/gpgscm/scheme.c (hasprop): Only symbols have property lists. + (get_property): New function. + (set_property): Likewise. + (opexe_4): Use the new functions. + + gpgscm: Fix installation of error handler. + + commit 185ba177abeaf2f8ad66529a42966362107a2d8b + * tests/gpgscm/ffi.scm: Set '*error-hook*' again so that the + interpreter will use our function. + + gpgscm: Use a static pool of cells for small integers. + + commit eca7b9bbee2986157ec6c078c998bd8a25becd8f + * tests/gpgscm/scheme-private.h (struct scheme): New fields for the + static integer cells. + * tests/gpgscm/scheme.c (_alloc_cellseg): New function. + (alloc_cellseg): Use the new function. + (MAX_SMALL_INTEGER): New macro. + (initialize_small_integers): New function. + (mk_small_integer): Likewise. + (mk_integer): Return a small integer if possible. + (_s_return): Do not free 'op' if it is a small integer. + (s_save): Use a small integer to box the opcode. + (scheme_init_custom_alloc): Initialize small integers. + (scheme_deinit): Free chunk of small integers. + * tests/gpgscm/scheme.h (USE_SMALL_INTEGERS): New macro. + +2016-11-17 Justus Winter + + gpgscm: Re-enable the garbage collector in case of errors. + + commit d2a75dc5ae2b172a232dad88639b15b4930b9151 + * tests/gpgscm/scheme.c (opexe_0): Enable gc before calling 'Error_1'. + + gpgscm: Fix string. + + commit 63cad2c16fdd343be89b576901c8f34de7cb74bf + * tests/gpgscm/scheme.c (type_to_string): Fix string. + +2016-11-17 NIIBE Yutaka + + Fix EXEEXT for lock obj creation. + + commit eeef6b8724b43e105ae2beef022fc957eb228bcf + * src/Makefile.am (lock-obj-pub.native.h): Add EXEEXT for + the executable gen-posix-lock-obj. + +2016-11-15 Justus Winter + + gpgscm: Mark cells requiring finalization. + + commit ad10069af6b0d247f27b7dbf891029eb34d264e0 + * tests/gpgscm/scheme.c (T_FINALIZE): New macro. + (mk_port): Use the new macro. + (mk_foreign_object): Likewise. + (mk_counted_string): Likewise. + (mk_empty_string): Likewise. + (gc): Only call 'finalize_cell' for cells with the new flag. + + gpgscm: Recover more cells. + + commit dd6bd1bf2a767e22bb7c1bd470ce94527a9fae3d + * tests/gpgscm/scheme.c (_s_return): Recover the cell holding the + opcode. + +2016-11-14 Werner Koch + + Release 1.25. + + commit 6d834f817fdb741ec64dcfbd2166ea044e4e0c3d + * configure.ac: Set LT version to C20/A20/R0. + + po: Update German translation. + + commit 9cecc8ccded0759d94b08c9859e7ea843430dd97 + + + Fix typo in two new error descriptions. + + commit 80350f97e9e811b9e77b59b8fc4172043f072f42 + + +2016-11-14 Justus Winter + + gpgscm: Avoid cell allocation overhead. + + commit dc1d3a79fa3e7944ea6ef02bc968446f9aa6d648 + * tests/gpgscm/scheme-private.h (struct scheme): New fields + 'inhibit_gc', 'reserved_cells', and 'reserved_lineno'. + * tests/gpgscm/scheme.c (GC_ENABLED): New macro. + (USE_GC_LOCKING): Likewise. + (gc_reservations): Likewise. + (gc_reservation_failure): New function. + (_gc_disable): Likewise. + (gc_disable): New macro. + (gc_enable): Likewise. + (gc_enabled): Likewise. + (gc_consume): Likewise. + (get_cell_x): Consume reserved cell if garbage collection is disabled. + (_get_cell): Assert that gc is enabled. + (get_cell): Only record cell in the list of recently allocated cells + if gc is enabled. + (get_vector_object): Likewise. + (gc): Assert that gc is enabled. + (s_return): Add comment, adjust call to '_s_return'. + (s_return_enable_gc): New macro. + (_s_return): Add flag 'enable_gc' and re-enable gc if set. + (oblist_add_by_name): Use the new facilities to protect the + allocations. + (new_frame_in_env): Likewise. + (new_slot_spec_in_env): Likewise. + (s_save): Likewise. + (opexe_0): Likewise. + (opexe_1): Likewise. + (opexe_2): Likewise. + (opexe_5): Likewise. + (opexe_6): Likewise. + (scheme_init_custom_alloc): Initialize the new fields. + +2016-11-12 Justus Winter + + estream: Support 'es_poll' on Windows. + + commit 40e5ff0a0084c0d9521b401db4f38885bfdae233 + * src/Makefile.am (arch_sources): Add new file. + * src/estream.c (O_NONBLOCK): Move to 'gpgrt-int.h'. + (BUFFER_BLOCK_SIZE): Likewise. + (BUFFER_UNREAD_SIZE): Likewise. + (struct notify_list_s, notify_list_t): Likewise. + (struct _gpgrt_stream_internal, estream_internal_t): Likewise. + (X_POLLABLE): New macro. + (parse_mode): Parse keyword 'pollable', emulate O_NONBLOCK using the + same mechanism on Windows. + (_gpgrt_poll): Use the new '_gpgrt_w32_poll' on Windows. + * src/gpgrt-int.h (_gpgrt_functions_w32_pollable): New declaration. + (_gpgrt_w32_pollable_create): New prototype. + (_gpgrt_w32_poll): Likewise. + * src/w32-estream.c: New file. This code is adapted from GPGME. + * tests/t-poll.c (create_pipe): Create pollable streams. + + estream: Track the kind of backend used. + + commit e15416d3668ea9dcc6a64cbb98140a99be8a7865 + * src/estream.c (struct _gpgrt_stream_internal): Add 'kind'. + (init_stream_obj): New parameter 'kind', initialize field. + (es_create): New parameter 'kind'. Update all callers. + * src/gpgrt-int.h (gpgrt_stream_backend_kind_t): New type. + + estream: Rework how the cookie functions are handled. + + commit a0651e910f962a49b0b7f7942512f17a5fe39a7d + * src/estream.c (cookie_ioctl_function_t): Move to 'gpgrt-int.h', + along with the macros for the IOCTL numbers. + (estream_functions_mem): Use the new type and add the ioctl function. + (estream_functions_fd): Likewise. + (estream_functions_w32): Likewise. + (estream_functions_fp): Likewise. + (init_stream_object): Use the new type, and also initialize + 'func_ioctl'. + (es_create): Use the new type. + (_gpgrt_fopen): Adapt. + (_gpgrt_mopen): Likewise. + (_gpgrt_fopenmem): Likewise. + (_gpgrt_fopencookie): Likewise. + (_gpgrt_fdopen): Likewise. + (_gpgrt_fpopen): Likewise. + (do_w32open): Likewise. + * src/gpgrt-int.h (struct cookie_io_functions_s): New type. + + estream: Rework modestring handling. + + commit 135319b5d1f9a88187687646c762759cfa05a7ec + * src/estream.c (X_SAMETHREAD, X_SYSOPEN): New macros. + (parse_mode): Rework how information flows from here to 'es_create'. + Instead of using an integer flag per mode, use flags. + (init_stream_obj): Adapt accordingly. + (es_create): Likewise. + (_gpgrt_fopen): Likewise. + (_gpgrt_mopen): Likewise. + (_gpgrt_fopenmem): Likewise. + (_gpgrt_fopencookie): Likewise. + (_gpgrt_fdopen): Likewise. + (_gpgrt_fpopen): Likewise. + (do_w32open): Likewise. + (_gpgrt_freopen): Likewise. + +2016-11-12 Werner Koch + + Add new interface gpgrt_get_syscall_clamp. + + commit b7972767513c8748096ebed78d1e1621bd2bd459 + * src/visibility.c (gpgrt_get_syscall_clamp): New. + * src/gpg-error.vers, src/gpg-error.def.in: Add function. + * src/gpg-error.h.in: Ditto. + * src/estream.c (_gpgrt_get_syscall_clamp): New. + +2016-11-11 Werner Koch + + Use the syscall clamp functions also for lock functions. + + commit 25d463c67821901c8fd6736c815f11e85bbae66f + * src/posix-lock.c (pre_lock_func, post_lock_func): New. + (_gpgrt_lock_set_lock_clamp): New. + (_gpgrt_lock_lock): Use clamp functions. + * src/w32-lock.c (pre_lock_func, post_lock_func): New. + (_gpgrt_lock_set_lock_clamp): New. + (_gpgrt_lock_lock): Use clamp functions. + * src/posix-lock.c (pre_syscall_func, post_syscall_func): New. + (_gpgrt_thread_set_syscall_clamp): New. + (_gpgrt_yield): Use clamp functions. + * src/w32-lock.c (pre_syscall_func, post_syscall_func): New. + (_gpgrt_thread_set_syscall_clamp): New. + (_gpgrt_yield): Use clamp functions. + * src/estream.c: Include lock.h and thread.h. + (do_deinit): Call _gpgrt_lock_set_lock_clamp. + (_gpgrt_set_syscall_clamp): Ditto. + +2016-11-11 Andre Heinecke + + w32: Fix lock c++ narrowing conversion warning. + + commit b1ccab5bf8e1206aae1307ad5d23890be4251c8f + * src/syscfg/lock-obj-pub.mingw32.h (gpgrt_lock_t): Declare priv as + unsigned char. + +2016-11-10 Werner Koch + + Change description of GPG_ERR_OPEN_KEYRING. + + commit bae57a21cfab25ad11c82dc6e69d82d1f2f7a415 + + +2016-11-10 Justus Winter + + gpgscm: Recover cells from the list of recently allocated cells. + + commit 1659878b827d0a4e041921e0c3a3555d39a742df + * tests/gpgscm/scheme.c (ok_to_freely_gc): Recover cells. + + gpgscm: Recover cells used to maintain interpreter state. + + commit 85388f1ef82bd0a92e94a463acfa157e6f9356f8 + * tests/gpgscm/scheme.c (free_cell): New function. + (free_cons): Likewise. + (_s_return): Use the new function to recover cells used to save the + state of the interpreter in 's_save'. This reduces the need to do a + garbage collection considerably. + + gpgscm: Reduce opcode dispatch overhead. + + commit f65fb16724712b3d6072f27b47e2658f27398dd4 + * tests/gpgscm/scheme.c (s_thread_to): New macro. + (CASE): Likewise. + (opexe_[0-6]): Use 'CASE' instead of 'case' statements, replace + 's_goto' with 's_thread_to' where applicable. + + gpgscm: Make the compile-hook configurable. + + commit a678b9fdf7d48409a32afab5b487322a7fc11e16 + * tests/gpgscm/scheme-private.h (struct scheme): Make field + 'COMPILE_HOOK' optional. + * tests/gpgscm/scheme.c (opexe_0): Fix guard. + (scheme_init_custom_alloc): Conditionally initialize 'COMPILE_HOOK'. + * tests/gpgscm/scheme.h (USE_COMPILE_HOOK): Define to 1 by default. + + gpgscm: Drop obsolete commented-out code. + + commit f69a754515f43037da8ac8535967cd825b220be4 + * tests/gpgscm/scheme.c (opexe_5): Drop obsolete code. + + gpgscm: Remove dubious stack implementation. + + commit a6ce303f0c69542999c607309128afd6293e2e1b + * tests/gpgscm/scheme-private.h (struct scheme): Remove related fields. + * tests/gpgscm/scheme.c: Drop all !USE_SCHEME_STACK code. + * tests/gpgscm/scheme.h (USE_SCHEME_STACK): Remove macro. + +2016-11-08 Justus Winter + + gpgscm: Expose seek and associated constants. + + commit 13831e9cd6839e44a8e32c640589edb8bf17ef51 + * tests/gpgscm/ffi.c (do_seek): New function. + (ffi_init): Expose 'seek' and 'SEEK_{SET,CUR,END}'. + * tests/gpgscm/lib.scm: Document the new function. + + gpgscm: Fix error message. + + commit d5458258299889af97e714c15e6a9b859e1a0545 + * tests/gpgscm/ffi.c (do_wait_processes): Fix and improve error + messages. + +2016-11-07 Justus Winter + + gpgscm: Generalize splice to write to multiple sinks. + + commit 1edacbc5a4a0f4dee3ab82c1fda7c7b1c5874761 + * tests/gpgscm/ffi.c (ordinal_suffix): New function. + (do_splice): Generalize splice to write to multiple sinks. + * tests/gpgscm/lib.scm (splice): Document this fact. + + gpgscm: Drop 'len' argument from splice. + + commit 598aeda60bc3e6d49d935927b5ec33145f7af9db + * tests/gpgscm/ffi.c (do_splice): Drop 'len' argument, no-one uses it. + * tests/gpgscm/lib.scm (splice): Document foreign function. + + tests: Move environment creation and teardown into each test. + + commit 1564fc3b2ff52e7e5ad9b01a24e1f399934775b8 + * tests/gpgscm/tests.scm (log): New function. + * tests/openpgp/run-tests.scm (run-tests-parallel): Do not run the + startup and teardown scripts. + (run-tests-sequential): Likewise. + * tests/openpgp/setup.scm: Move all functions... + * tests/openpgp/defs.scm: ... here and make them less verbose. + (setup-environment): New function. + (setup-legacy-environment): Likewise. + (start-agent): Make less verbose, run 'stop-agent' at interpreter + exit. + (stop-agent): Make less verbose. + * tests/openpgp/finish.scm: Drop file. + * tests/openpgp/Makefile.am (EXTRA_DIST): Drop removed file. + * tests/openpgp/4gb-packet.scm: Use 'setup-environment' or + 'setup-legacy-environment' as appropriate. + * tests/openpgp/armdetach.scm: Likewise. + * tests/openpgp/armdetachm.scm: Likewise. + * tests/openpgp/armencrypt.scm: Likewise. + * tests/openpgp/armencryptp.scm: Likewise. + * tests/openpgp/armor.scm: Likewise. + * tests/openpgp/armsignencrypt.scm: Likewise. + * tests/openpgp/armsigs.scm: Likewise. + * tests/openpgp/clearsig.scm: Likewise. + * tests/openpgp/conventional-mdc.scm: Likewise. + * tests/openpgp/conventional.scm: Likewise. + * tests/openpgp/decrypt-dsa.scm: Likewise. + * tests/openpgp/decrypt.scm: Likewise. + * tests/openpgp/default-key.scm: Likewise. + * tests/openpgp/detach.scm: Likewise. + * tests/openpgp/detachm.scm: Likewise. + * tests/openpgp/ecc.scm: Likewise. + * tests/openpgp/encrypt-dsa.scm: Likewise. + * tests/openpgp/encrypt.scm: Likewise. + * tests/openpgp/encryptp.scm: Likewise. + * tests/openpgp/export.scm: Likewise. + * tests/openpgp/finish.scm: Likewise. + * tests/openpgp/genkey1024.scm: Likewise. + * tests/openpgp/gpgtar.scm: Likewise. + * tests/openpgp/gpgv-forged-keyring.scm: Likewise. + * tests/openpgp/import.scm: Likewise. + * tests/openpgp/issue2015.scm: Likewise. + * tests/openpgp/issue2417.scm: Likewise. + * tests/openpgp/issue2419.scm: Likewise. + * tests/openpgp/key-selection.scm: Likewise. + * tests/openpgp/mds.scm: Likewise. + * tests/openpgp/multisig.scm: Likewise. + * tests/openpgp/quick-key-manipulation.scm: Likewise. + * tests/openpgp/seat.scm: Likewise. + * tests/openpgp/shell.scm: Likewise. + * tests/openpgp/signencrypt-dsa.scm: Likewise. + * tests/openpgp/signencrypt.scm: Likewise. + * tests/openpgp/sigs-dsa.scm: Likewise. + * tests/openpgp/sigs.scm: Likewise. + * tests/openpgp/ssh.scm: Likewise. + * tests/openpgp/tofu.scm: Likewise. + * tests/openpgp/use-exact-key.scm: Likewise. + * tests/openpgp/verify.scm: Likewise. + * tests/openpgp/version.scm: Likewise. + * tests/openpgp/issue2346.scm: Likewise and simplify. + + gpgscm,w32: Provide schemish file handling for binary files. + + commit fa82512020f8cd91c68bbf1d24a4f6bffe5385ba + * tests/gpgscm/lib.scm (call-with-binary-input-file): New function. + (call-with-binary-output-file): Likewise. + + gpgscm: Add support for pseudo-random numbers. + + commit 70c5f30074ec996f60f62cd09e67167da78c6d8a + * tests/gpgscm/ffi.c (do_getpid): New function. + (do_srandom): Likewise. + (random_scaled): Likewise. + (do_random): Likewise. + (do_make_random_string): Likewise. + (ffi_init): Expose the new functions. + * tests/gpgscm/lib.scm: Document the new functions. + +2016-11-04 Justus Winter + + gpgscm: Fix printing strings containing zero bytes. + + commit fa221a1d5272eb231393a2cc0173635a5098bb89 + * tests/gpgscm/scheme.c (atom2str): Fix computing the length of Scheme + strings. Scheme strings can contain zero bytes. + + gpgscm: Implement 'atexit'. + + commit 97024a0cd0e1f5262ee60bf40a91f169bcc45a23 + * tests/gpgscm/ffi.scm (throw): Run *run-atexit-handlers* when + terminating the interpreter. + (*atexit-handlers*): New variable. + (*run-atexit-handlers*): New function. + (atexit): Likewise. + * tests/gpgscm/main.c (main): Run *run-atexit-handlers* at normal + interpreter shutdown. + +2016-11-03 Justus Winter + + gpgscm,tests: Add new functions to the test environment. + + commit e4a694eb48a098c3a3983767099dcce4e9157d16 + * tests/gpgscm/lib.scm (first, last, powerset): New functions. + * tests/gpgscm/tests.scm (interactive-shell): New function. + * tests/openpgp/Makefile.am (EXTRA_DIST): Add new file. + * tests/openpgp/README: Document 'interactive-shell'. + * tests/openpgp/shell.scm: New file. + +2016-11-02 Justus Winter + + gpgscm: Fix inclusion of readline header. + + commit 0ccc6f5ffccec23587d06e32da88fb0acd80f2c6 + * tests/gpgscm/ffi.c: Define magic macro to prevent the completion + function from redefined. + +2016-11-02 Werner Koch + + Add error codes GPG_ERR_TOO_YOUNG and GPG_ERR_TOO_OLD. + + commit 49e32eed4550869644d706352d683ddba5696d4e + + +2016-10-20 Justus Winter + + common,w32: Fix setting environment variables on Windows. + + commit e7ba35f207cb06f6d0e085ab3faf68d118606655 + * common/sysutils.c (gnupg_setenv): Also update the environment block + maintained by the C runtime. + (gnupg_unsetenv): Likewise. + * tests/gpgscm/ffi.c (do_setenv): Fix error handling. + +2016-10-18 Justus Winter + + estream: Fix modestring parsing. + + commit 0734f4863859257d18ca96f4b9be62be75fcffe1 + * src/estream.c (parse_mode): Fix parsing the 'sysopen' flag. + +2016-10-17 Justus Winter + + gpgscm: Initialize nesting stack. + + commit 7a262df038f495d27e2d8ec806ea0d47c925c88b + * tests/gpgscm/scheme.c (scheme_init_custom_alloc): Initialize nesting + stack. + +2016-10-07 Justus Winter + + tests: Improve handling of Windows newlines. + + commit e8db2ea9542eef0bc7b51c9f69109a056269c048 + * tests/gpgscm/lib.scm (string-split-newlines): New function. + * tests/openpgp/default-key.scm: Use new function. + * tests/openpgp/defs.scm: Likewise. + * tests/openpgp/export.scm: Likewise. + * tests/openpgp/import.scm: Likewise. + + gpgscm: Improve test of low-level functions. + + commit 2e47dcf432bc26cbaa1a6ba6716ab74facd06353 + * tests/gpgscm/t-child.c: Print large amounts of data. + * tests/gpgscm/t-child.scm: Test that this works. + + gpgscm: Improve path handling. + + commit ff00a2d792091f35380c9541ee88fbd9c0d76c43 + * tests/gpgscm/ffi.c (ffi_init): New Scheme variable '*win32*'. + * tests/gpgscm/tests.scm (canonical-path): Correctly handle paths with + drive letter on Windows. Use 'path-join'. + (path-expand): Use 'path-join'. + +2016-10-07 Werner Koch + + Add error code USER_ID_EXISTS, NAME_EXISTS, and DUP_NAME. + + commit 0c837a82207d0b19f9dabc8870ffb23d6a4ade64 + + +2016-10-06 Justus Winter + + gpgscm: Update callsite of 'gnupg_spawn_process'. + + commit bbd3be18ca9feac21963cc7d682f5a7d89fd9aba + * tests/gpgscm/ffi.c (do_spawn_process): Adapt to the changes to + 'gnupg_spawn_process'. + +2016-10-04 Justus Winter + + tests,w32: Do not expose 'glob' to gpgscm. + + commit 7359d7acb687d572dd0a4e40fd979566efbf4e21 + * tests/gpgscm/ffi.c (do_glob): Remove function. + (ffi_init): Likewise. + +2016-09-19 Justus Winter + + tests: Refine the repl function. + + commit a3b6b7643d906264b56d6fa041bcb95e96eb1898 + * tests/gpgscm/repl.scm (repl): Add an argument 'environment'. + (interactive-repl): Add an optional argument 'environment'. + + tests: Implement interpreter shutdown using exceptions. + + commit ea399aaaf4c9de92d24ab59cdc3586608bf35698 + * tests/gpgscm/ffi.c (ffi_init): Rename 'exit' to '_exit'. + * tests/gpgscm/ffi.scm (*interpreter-exit*): New variable. + (throw): New function. + (exit): New function. + + tests: Correctly handle exceptions in resource handling macros. + + commit ec34346129c77a7011872812567689aa09d99caa + * tests/gpgscm/tests.scm (letfd): Correctly release resources when an + exception is thrown. + (with-working-directory): Likewise. + (with-temporary-working-directory): Likewise. + (lettmp): Likewise. + + tests: Refine exception handling. + + commit 3fd08ed018f837399564896462f64af8ae389eec + * tests/gpgscm/init.scm (catch): Bind all arguments to '*error*' in + the error handler, update and fix comment. + (*error-hook*): Revert to original definition. + * tests/gpgscm/tests.scm (tr:do): Adapt accordingly. + * tests/openpgp/issue2419.scm: Likewise. + + tests: Use descriptive temporary file names. + + commit 86f421b7de364138d2d066b267b0f08a62c42a42 + * tests/gpgscm/ffi.c (do_get_isotime): New function. + (ffi_init): Add parameter 'scriptname', bind new function and + scriptname. + * tests/gpgscm/ffi.h (ffi_init): Update prototype. + * tests/gpgscm/main.c (main): Hand in the script name. + * tests/gpgscm/tests.scm (mkdtemp): Use current time and script name + for the names of temporary directories. + +2016-09-19 Werner Koch + + gpgscm: Fix gcrypt version check. + + commit a3cdf6ba9987ec2f4b951c3b2519f6beea147126 + * tests/gpgscm/main.c (main): Check against required and not installed + version. + +2016-09-17 Daniel Kahn Gillmor + + Fix more spelling. + + commit 42b61e8469179292814fea267ecd7d911396b965 + * NEWS, acinclude.m4, agent/command-ssh.c, agent/command.c, + agent/gpg-agent.c, agent/keyformat.txt, agent/protect-tool.c, + common/asshelp.c, common/b64enc.c, common/recsel.c, doc/DETAILS, + doc/HACKING, doc/Notes, doc/TRANSLATE, doc/dirmngr.texi, + doc/faq.org, doc/gpg-agent.texi, doc/gpg.texi, doc/gpgsm.texi, + doc/instguide.texi, g10/armor.c, g10/gpg.c, g10/keyedit.c, + g10/mainproc.c, g10/pkclist.c, g10/tofu.c, g13/sh-cmd.c, + g13/sh-dmcrypt.c, kbx/keybox-init.c, m4/pkg.m4, sm/call-dirmngr.c, + sm/gpgsm.c, tests/Makefile.am, tests/gpgscm/Manual.txt, + tests/gpgscm/scheme.c, tests/openpgp/gpgv-forged-keyring.scm, + tests/openpgp/multisig.test, tests/openpgp/verify.scm, + tests/pkits/README, tools/applygnupgdefaults, + tools/gpg-connect-agent.c, tools/mime-maker.c, tools/mime-parser.c: + minor spelling cleanup. + +2016-09-15 NIIBE Yutaka + + tests/gpgscm: Fix use of pointer. + + commit 95f7320a37d3870330a2b1f3493025b4820fa767 + * tests/gpgscm/scheme-private.h (struct scheme): Use (void *) for + alloc_seg. + * tests/gpgscm/scheme.c (alloc_cellseg): Use (void *) for cp. Use + (void *) for coercion of address calculation. + +2016-09-06 Justus Winter + + gpgscm: Fix detection of unbalanced parenthesis. + + commit 36405b2d208e5ec4c2c289d99ba4e7e1a29b8321 + * tests/gpgscm/main.c (load): Print error message. + * tests/gpgscm/scheme.c (opexe_0): Correctly report nesting level when + loading files. + +2016-09-01 Werner Koch + + Check the size of the time_t. + + commit bf7eb978597ba07906f0a7490e626c071af1987f + * configure.ac (AC_HEADER_TIME): New. + (AC_CHECK_SIZEOF): Check size of time_t. + + Add error WINDOW_TOO_SMALL, WINDOW_TOO_LARGE, and MISSING_ENVVAR. + + commit bc3e817bd7e671975f94bae20cbbf9a91fe3353b + + +2016-08-16 Werner Koch + + New error code GPG_ERR_ENGINE_TOO_OLD. + + commit b2640cb1f7b3b056ea4f8fe4b79d58fcd10ef93b + + +2016-08-12 Daniel Kahn Gillmor + + Call log_set_prefix() with human-readable labels. + + commit b912b371ffc56b0e657d58e2a891f6bb1affab4b + * agent/preset-passphrase.c, agent/protect-tool.c, dirmngr/dirmngr.c + * dirmngr/t-http.c, g10/gpg.c, g10/gpgv.c, g13/g13-syshelp.c + * g13/g13.c, kbx/kbxutil.c, scd/scdaemon.c, sm/gpgsm.c + * tests/gpgscm/main.c, tools/gpg-check-pattern.c + * tools/gpg-connect-agent.c, tools/gpgconf.c, tools/gpgtar.c + * tools/symcryptrun.c: Invoke log_set_prefix() with + human-readable labels. + +2016-08-10 Justus Winter + + tests: Improve temporary directory handling. + + commit 0b5146376ba4e6ef129ed4a0641591bafa5902f9 + * tests/gpgscm/ffi.c (ffi_init): Rename 'mkdtemp'. + * tests/gpgscm/tests.scm (mkdtemp): New function that uses a sensible + location and template if no arguments are given. + (with-temporary-working-directory): Simplify accordingly. + (make-temporary-file): Likewise. + * tests/openpgp/run-tests.scm (run-tests-parallel-isolated): Likewise. + (run-tests-sequential-isolated): Likewise. + + gpgscm: Make the name of foreign functions more unique. + + commit c609b6e6b08719b86a64fb186f6eee03d0b01b16 + * tests/gpgscm/ffi-private.h (ffi_define_function_name): Add another + underscore. + +2016-07-26 Justus Winter + + gpgscm: Do not shadow common function name in catch macro. + + commit d764c08a9215ab1c90a97fb019aa99ccf3721e02 + * tests/gpgscm/init.scm (catch): Do not shadow 'exit'. + + gpgscm: Make the verbose setting more useful. + + commit bd958b94ea3cdafa2457fdf0dcf436458fa755f6 + * tests/gpgscm/ffi.c (do_get_verbose): New function. + (do_set_verbose): Likewise. + (ffi_init): Turn *verbose* into a function, add *set-verbose!*. + * tests/gpgscm/tests.scm (call): Adapt accordingly. + (call-with-io): Dump output if *verbose* is high. + (pipe-do): Adapt accordingly. + * tests/openpgp/defs.scm: Set verbosity according to environment. + * tests/openpgp/run-tests.scm (test): Adapt accordingly. + +2016-07-22 Justus Winter + + gpgscm: Make function more general. + + commit 593c5ac8553922a7cf8055c6f3d4d3ea6d0f8cb6 + * tests/gpgscm/tests.scm (in-srcdir): Accept more path fragments. + +2016-07-21 Justus Winter + + gpgscm: Make assert macro more accurate. + + commit 4f5e0f510d72935ed6bc37f38261efd0ca45e04b + * tests/gpgscm/lib.scm (assert): Print the representation of the + failed expression. + + gpgscm: Make error message more useful. + + commit bc5199d51c45e11c5d9cba828b31ced9381bd27c + * tests/gpgscm/scheme.c (opexe_0): Include names of missing function + parameters in the error message. + +2016-07-19 Justus Winter + + tests: Add test for ssh support. + + commit 5851aec15309e9137603bf0e564fd5028ff742c1 + * tests/gpgscm/tests.scm (path-expand): New function. + * tests/openpgp/Makefile.am (TESTS): Add new test. + (sample_keys): Add new keys. + (CLEANFILES): Clean ssh socket and control file. + * tests/openpgp/fake-pinentry.c (main): Add a default passphrase. + * tests/openpgp/gpg-agent.conf.tmpl: Enable ssh support. + * tests/openpgp/samplekeys/ssh-dsa.key: New file. + * tests/openpgp/samplekeys/ssh-ecdsa.key: Likewise. + * tests/openpgp/samplekeys/ssh-ed25519.key: Likewise. + * tests/openpgp/samplekeys/ssh-rsa.key: Likewise. + * tests/openpgp/ssh.scm: Likewise. + +2016-07-15 Justus Winter + + gpgscm: Fix linking. + + commit 4932ef5277957153f4d066f17feb47a4db2b923b + * tests/gpgscm/Makefile.am: Add -lintl. + +2016-07-14 Werner Koch + + gpgscm: Use kludge to avoid improper use of ffi_schemify_name. + + commit 95c04eca273fe9bacbbd9666fd6806e0748792ed + * tests/gpgscm/ffi.c (ffi_schemify_name): Use xstrdup instead of + strdup for now. + + Release 1.24. + + commit bb1269c85bb41dbb6391756a65e8bc357d82d6b6 + + +2016-07-13 Werner Koch + + build: Update config.{guess,sub} to {2016-05-15,2016-06-20}. + + commit 387eeb5d5b57e4390c4eaf101bb5cf9cf3cbd4ba + * build-aux/config.guess: Update. + * build-aux/config.sub: Update. + +2016-07-12 Yann E. MORIN + + Add an option to disable tests. + + commit d57a16c3779eca84dedcf2423b26e41172cd5a96 + * configure.ac: add an option to enable/disable building tests + * Makefile.am: conditionally build tests + + Fix build without threads. + + commit abcdfa7964da62b92984516608faf8941038b71d + * src/gen-posix-lock-obj.c: properly guard inclusioin of pthread.h + * tests/t-lock.c: likewise + * tests/t-poll.c: likewise + +2016-07-07 Justus Winter + + gpgscm: Capture output of spawned processes. + + commit 912977e668d59baf39464fab7e93b9a617f9706f + * tests/gpgscm/tests.scm (call-check): Capture stdout and stderr, and + return stdout if the child exited successfully, or include stderr in + the error. + * tests/openpgp/version.scm: Demonstrate this by checking the stdout. + +2016-07-05 Justus Winter + + tests: Honor environment variable 'TMP'. + + commit 228b225c412573d73901e3e79b7cab64a05bb26e + This fixes problems with long socket names, e.g. when doing distcheck. + + * tests/gpgscm/tests.scm (path-join): New function. + (with-temporary-working-directory): Honor 'TMP'. + (make-temporary-file): Likewise. + * tests/migrations/Makefile.am (TMP): Default to '/tmp'. + (TESTS_ENVIRONMENT): Set 'TMP'. + * tests/openpgp/Makefile.am (TMP): Default to '/tmp'. + (TESTS_ENVIRONMENT): Set 'TMP'. + + gpgscm: Improve robustness and compatibility. + + commit 1406aa0fdf349b370cc2a5b87ada557455203dd2 + * tests/gpgscm/ffi.c (do_getenv): Avoid gccism. + (do_mkdtemp): Handle errors. + +2016-07-05 Andre Heinecke + + Define EWOULDBLOCK in case it is not defined. + + commit 65e967627b3d60f550c7d302227dcf9f797e437f + * src/estream.c (EWOULDBLOCK): Define fallback. + +2016-07-02 Werner Koch + + yat2m: Fix table formatting. + + commit 1a53a0ac4cc241a5c6d360d6259dd04afc09264c + * doc/yat2m.c (proc_texi_cmd): Use .TQ for @itemx. Print a .P at the + end of a level 0 table. + +2016-06-30 Justus Winter + + gpgscm: Fix reallocating string ports. + + commit 27d423b785afa3458e102fa3d7c1220ec50a47fe + * tests/gpgscm/scheme.c (realloc_port_string): Use memcpy because + Scheme strings may contain 0s. + + gpgscm: Free memory backing string ports. + + commit f103dd1d9dd69eb0a32cf2d91e3a595082f3f41c + * tests/gpgscm/scheme.c (finalize_cell): Free memory backing string + ports. + + gpgscm: Use the allocator from libgcrypt. + + commit 9af66b27499646f6386ab902e75056b961192f50 + * tests/gpgscm/main.c (main): Use the allocator from libgcrypt. + +2016-06-28 Justus Winter + + gpgscm: Fix memory leaks. + + commit b4e31c551b9205684e812e941bd974cc594cf97f + * tests/gpgscm/ffi-private.h (ffi_schemify_name): Fix prototype. + (ffi_define_function_name): Free schemified name. + (ffi_define_function): Likewise. + (ffi_define_constant): Likewise. + (ffi_define_variable_pointer): Likewise. + * tests/gpgscm/ffi.c (do_wait_processes): Free arrays. + (ffi_schemify_name): Fix type. + * tests/gpgscm/main.c (main): Free 'sc'. + + gpgscm: Free file names. + + commit 9368fd55602a1d36f6bf6bc3797a4f2d7a782ded + * tests/gpgscm/scheme.c (scheme_load_named_file): Free file name. + + gpgscm: Fix buffer overflow. + + commit 73b24ed0cb0ba3271e887d1044a497e53ca90b62 + * tests/gpgscm/scheme.c (store_string): Avoid writing past allocated + buffer. + +2016-06-27 Werner Koch + + estream: Fix bug es_fclose_snatch if a seek has been used. + + commit 467ccbb6062439eda9dce7cd991934d1a5491713 + * src/estream.c (func_mem_ioctl): Set LEN from DATA_LEN. + +2016-06-25 Werner Koch + + w32: Silence compiler warnings about redefined macros. + + commit 7213299fdb2293b974fc436686626ae0a29290b8 + * src/estream.c (S_IRGRP) [W32]: Protect against redefinition. + + doc: Update yat2m.c. + + commit 9b5e3d1608922f4aaf9958e022431849d5a58501 + * doc/yat2m.c: Update from gnupg. + +2016-06-24 Werner Koch + + estream: Remove two compiler warning. + + commit 0982a72ecc8e7738ec968b3a6710bdacb0f2da4e + * src/estream.c (func_file_create): Remove dead assignment. + (doreadline): Do not decrement SPACE_LEFT before breaking the loop. + Add an extra block to limit the scope of that variable. + +2016-06-23 Justus Winter + + gpgscm: Handle exceptions in the transformation monad. + + commit 7b6728b7ecf7b0646db2de35625aba3b0cd0bf02 + * tests/gpgscm/tests.scm (pipe:do): Raise errors. + (tr:spawn): Catch and return errors. + (tr:call-with-content): Likewise. + (tr:{open,write-to,pipe-do,assert-identity,assert-weak-identity}): + Adapt. + + gpgscm: Add types for special objects. + + commit 24df932e5fdda891760b34b7e5fccd5aba62fde8 + * tests/gpgscm/scheme.c (enum scheme_types): Add types for boolean, + nil, eof, and the sink object. + (type_to_string): Handle new types. + (scheme_init_custom_alloc): Give special objects a type. + + gpgscm: Fix Scheme initialization. + + commit 64ab51521f1a5fabee292554d7403113898f1b28 + This potentially causes a crash if the garbage collector marks an eof + object. + + * tests/gpgscm/scheme.c (scheme_init_custom_alloc): Initialize + 'EOF_OBJ'. + +2016-06-21 Justus Winter + + gpgscm: Add more file handling functions. + + commit 5fee932e0ad2b2f5e876a70bdeef77c38e248a2e + * tests/gpgscm/ffi.c (do_glob): New function. + (ffi_init): Define new function. + * tests/gpgscm/tests.scm (basename-suffix): New function.x + + gpgscm: Improve test framework. + + commit d7df61081ec228db17e2bfe2e05820da8cc2d264 + * tests/gpgscm/lib.scm (echo): Move... + * tests/gpgscm/tests.scm (echo): ... here. + (info, error, skip): And use echo here. + (file-exists?): New function. + (tr:spawn): Check that source exists and if the sink has been created. + (tr:call-with-content): Hand in optional arguments. + + gpgscm: Use native string searching functions. + + commit f4a23bc0fae621ac4b0978de4ea8f976ec6b650f + * tests/gpgscm/ffi-private.h: Handle character arguments. + * tests/gpgscm/ffi.c (do_string_index): New function. + (do_string_rindex): Likewise. + (do_string_contains): Likewise. + (ffi_init): Define new functions. + * tests/gpgscm/ffi.scm (ffi-define): New macro. + * tests/gpgscm/lib.scm (string-index): Use native function, + demonstrate behavior. + (string-rindex): Likewise. + (string-contains?): Likewise. + Demonstrate behavior of various other functions. + (read-all): Rework so that it can handle large files. + + gpgscm: Improve error reporting. + + commit 2bc2f95ac823f0a6449bd68dee4fc094db52f2e5 + * tests/gpgscm/scheme.c (type_to_string): New function. + (Eval_Cycle): Include actual type in error message. + + gpgscm: Make memory allocation failures fatal. + + commit 224c171c856c662d22ba236eaa2128323bde1d08 + * tests/gpgscm/scheme.c (Eval_Cycle): Exit if we run out of memory. + +2016-06-17 Werner Koch + + tests: Make make distcheck work again. + + commit cdd09e054a6bc4716c7847fd0779a091cbca0e8f + * Makefile.am (tests): Remove test code which would led to doubling + calls to for e.g. "make distclean". + * tests/Makefile.am: Typo fixes. + * tests/gpgscm/Makefile.am (EXTRA_DIST): Fix name of License file. + Add repl.scm. + (check): Replace by check-local because check is a standard automake + target. + * tests/openpgp/Makefile.am (TESTS_ENVIRONMENT): Replace gmake0sim by + automake generated macro. + (EXTRA_DIST): Add defs.scm + + gpgscm: Silence compiler warnings. + + commit d230bf3ee80cac2fe721afccab9e98b3a9be2e9a + * tests/gpgscm/scheme.c (mk_integer): Rename arg NUM to N. + (fill_vector): Ditto. + (mark): Rename var NUM to N. + (set_slot_in_env): Mark SC as unused. + (is_any): Mark P as unused. + + Add license notices for TinySCHEME. + + commit 8b1798f10c2641f79f4d770e88712be8b13dc22f + * tests/gpgscm/COPYING: Rename to ... + * tests/gpgscm/LICENSE.TinySCHEME: this. + * AUTHORS: Add a note about TinySCHEME. + * build-aux/speedo/w32/pkg-copyright.txt: Add TinySCHEME notice. + +2016-06-17 Justus Winter + + tests/gpgscm: Add a TinySCHEME-based test driver. + + commit 5b417d262de048ef221ed77b2f9d2c1a843096bb + * configure.ac: Add new component. + * tests/Makefile.am: Likewise. + * tests/gpgscm/Makefile.am: New file. + * tests/gpgscm/ffi-private.h: Likewise. + * tests/gpgscm/ffi.c: Likewise. + * tests/gpgscm/ffi.h: Likewise. + * tests/gpgscm/ffi.scm: Likewise. + * tests/gpgscm/lib.scm: Likewise. + * tests/gpgscm/main.c: Likewise. + * tests/gpgscm/private.h: Likewise. + * tests/gpgscm/repl.scm: Likewise. + * tests/gpgscm/scheme-config.h: Likewise. + * tests/gpgscm/t-child.c: Likewise. + * tests/gpgscm/t-child.scm: Likewise. + * tests/gpgscm/tests.scm: Likewise. + + tests/gpgscm: Foreign objects support for TinySCHEME. + + commit 9fecd60c32aca6b32008310237d0ed524eede3d5 + * tests/gpgscm/scheme-private.h (struct cell): Add 'foreign_object'. + (is_foreign_object): New prototype. + (get_foreign_object_{vtable,data}): Likewise. + * tests/gpgscm/scheme.c (enum scheme_types): New type. + (is_foreign_object): New function. + (get_foreign_object_{vtable,data}): Likewise. + (mk_foreign_object): Likewise. + (finalize_cell): Free foreign objects. + (atom2str): Pretty-print foreign objects. + (vtbl): Add new functions. + * tests/gpgscm/scheme.h (struct foreign_object_vtable): New type. + (mk_foreign_object): New prototype. + (struct scheme_interface): Add new functions. + + Patch from Thomas Munro, + https://sourceforge.net/p/tinyscheme/patches/13/ + + tests/gpgscm: Dynamically allocate string buffer. + + commit ef65b7bb2232343f72d03a0e0521de4ada3dc63b + * tests/gpgscm/scheme-config.h (strbuff{,_size}): Make buffer dynamic. + * tests/gpgscm/scheme.c (expand_strbuff): New function. + (putcharacter): Adapt length test. + (readstrexp): Expand buffer if necessary. + (scheme_init_custom_alloc): Initialize buffer. + (scheme_deinit): Free buffer. + + Patch from Thomas Munro, + https://sourceforge.net/p/tinyscheme/patches/11/ + + tests/gpgscm: Make exception value available. + + commit c0cf52627d8d68d23bcac60571455ffd1b052106 + * tests/gpgscm/init.scm (throw): Hand exception value to the handler. + (catch): And bind it to *error*. + + tests/gpgscm: Add package macro. + + commit f6c0f9a420c4401d8d358049f8814799161185fa + * tests/gpgscm/init.scm: Add package macro from manual. + + tests/gpgscm: Expose function to open streams as Scheme ports. + + commit 2717b9c172f0a25094ad2e654459dbe9d7180e38 + * tests/gpgscm/scheme.c (vtbl): Add 'port_from_file' to the vtable. + * tests/gpgscm/scheme.h (struct scheme_interface): New field + 'mk_port_from_file'. + + tests/gpgscm: Nicer error message. + + commit 0c601ae085e95745a950a9d75ffdc8be42b3e1b2 + * tests/gpgscm/scheme.c (opexe_0): Include the value that we tried to + evaluate as function-like in the error message. + + tests/gpgscm: Fix error hook. + + commit 16e4898a735e8f85c4ca6b44adf5a92b1a42d1af + * tests/gpgscm/init.scm (*error-hook*): Fix error hook so that the + whole error message is displayed. + + tests/gpgscm: Handle unhandled enumeration values. + + commit fe1c0866bc1b2c685136ea19521ffab2deb25ec3 + * tests/gpgscm/scheme.c (opexe_{3,4}): Handle unhandled enumeration + values in the opcode dispatching code. + + tests/gpgscm: Verbatim import of latest TinySCHEME. + + commit 864992fdf695996dbac9bb344b1fdd879f735473 + Revision 110 from svn://svn.code.sf.net/p/tinyscheme/code/trunk + + * tests/gpgscm/COPYING: New file. + * tests/gpgscm/Manual.txt: Likewise. + * tests/gpgscm/init.scm: Likewise. + * tests/gpgscm/opdefines.h: Likewise. + * tests/gpgscm/scheme-private.h: Likewise. + * tests/gpgscm/scheme.c: Likewise. + * tests/gpgscm/scheme.h: Likewise. + +2016-06-15 Werner Koch + + Release 1.23. + + commit e444cacc74c488063336c196f0c01e98f67cf999 + + + po: Update German translation. + + commit d878afa4b884149dca587131bdf5b6d8f96227fa + + +2016-06-15 Jakub Bogusz + + po: Update Polish translation. + + commit b908104846a71cf8ae3d3323be6bbc6edcef6ee0 + + +2016-06-15 Werner Koch + + tests: Fix rare deadlock condition in t-poll. + + commit 7ed150201cc5058650cf9673a4e53720a37841c8 + * tests/t-poll.c (launch_thread): Use es_fileno before starting the + thread. + +2016-06-15 NIIBE Yutaka + + estream: Fix assertion failure due to es_flush. + + commit 28fd0ab40739e8cb73f208e30f78d8aa7a0a6d19 + * src/estream.c (es_writen): Set writing flag even if no data was + written. + +2016-06-15 Werner Koch + + Adjust memory limit of es_fopenmem to the block size. + + commit baf4bcc0973c8b04bd760aaab0f4232c9354e203 + * src/estream.c (func_mem_create): Round up memory limit. + +2016-05-17 Werner Koch + + Add GPG_ERR_SUBKEYS_EXP_OR_REV. + + commit 1ee822f9ff73a9a302ad0eb298640797d735e62b + + +2016-05-07 Werner Koch + + syscfg: Add a powerpc and a tilgegx architecture. + + commit dfcd58fd3f58e548062b91bd6e20e27cbf4da18d + * src/syscfg/lock-obj-pub.powerpc-unknown-linux-gnuspe.h: New. + * src/syscfg/lock-obj-pub.tilegx-unknown-linux-gnu.h: New. + * src/Makefile.am (lock_obj_pub): Add them. + +2016-04-25 Werner Koch + + Release 1.22. + + commit 9a05076e90eef504cbc3ef614982f856b9b60540 + * configure.ac: Set LT version to C18/A18/R0. + + build: Update config.{guess,sub} to 2016-04-02 and 2016-03-30. + + commit 8ae3af15caaaaffaa9dbeab5fd767076891200bb + * build-aux/config.guess: Update. + * build-aux/config.sub: Update. + +2016-04-25 NIIBE Yutaka + + Fix for HPPA. + + commit f1104b92249005a31961d1a32c38ba65a0b3ff3a + * configure.ac (HAVE_GCC_ATTRIBUTE_ALIGNED): Revert. + * src/gen-posix-lock-obj.c (USE_16BYTE_ALIGNMENT): Revert. + * src/syscfg/lock-obj-pub.hppa-unknown-linux-gnu.h: Revert. + +2016-04-21 Werner Koch + + w32: Add iconv functions. + + commit 1cd1ddb4ac2c13223a073f6d77696bcd6253e2ff + * src/w32-add.h (gpgrt_w32_iconv_t): New. + (gpgrt_w32_iconv_open, gpgrt_w32_iconv_close, gpgrt_w32_iconv): New. + ( GPGRT_ENABLE_W32_ICONV_MACROS): New + * src/w32-iconv.c: Change license to LGPLv2.1+. Dispable mlang + feature. Remove external DLL loading. Simplify iconv functions. Use + cleaner context struct pattern. Use gpgrt namespace. + * src/gpg-error.def.in: Add new functions. + +2016-04-05 Werner Koch + + estream,w32: Temporary fix for gpgrt_poll. + + commit 4354720ab3631dfd2811d881566b10a72c8f2165 + * src/estream.c (_gpgrt_poll) [W32]: Do not use FD_ISSET. + +2016-03-29 Werner Koch + + estream: Prepare for new mode flag "sysopen". + + commit 5d1adaa5fd12f65f49abeb99e5ae7226ec27ba0e + * src/estream.c (parse_mode): Add arg "sysopen". Adjust all callers. + + estream: Use simpler names for static functions. + + commit de0618d5c64e02b9b3a568fc859d9edcb4ab35ba + * src/estream.c: Replace all es_func_* to just func_*. + + estream: Remove strange macro for better readability. + + commit 217a451d54186283f09af5b3c03933f214ddf1c0 + * src/estream.c (SET_UNLESS_NONZERO): Remove macro. + (es_deinitialize): Replace that macro by direct code. + +2016-03-24 Peter Wu + + Add function gpgrt_annotate_leaked_object. + + commit 52c3606b2384f33ef30ea5ada3f187829de9dcf7 + * src/gpg-error.h.in: add gpgrt_annotate_leaked_object to support + marking memory as non-leaked for Clang and GCC. + +2016-03-14 Kylie McClain + + syscfg: Add lock-obj-pub files for {armv5, armv6, x86_64}-musl targets. + + commit 140cfd51cee738a55caf9d347981f6f81e1990a4 + * src/syscfg/lock-obj-pub.armv5-unknown-linux-musleabi.h: New. + * src/syscfg/lock-obj-pub.armv6-unknown-linux-musleabihf.h New. + * src/syscfg/lock-obj-pub.x86_64-pc-linux-musl.h: New. + * src/Makefile.am (lock_obj_pub): Add files. + +2016-03-04 NIIBE Yutaka + + Fix detecting Solaris operating system. + + commit f7a77c5c236ecec846de9be46703026f9b01008f + * src/gen-posix-lock-obj.c (USE_DOUBLE_FOR_ALIGNMENT): Check for + the macro __sun. + + For Solaris, add -lrt correctly. + + commit f9fc565129293f47cbfe4da48fcd6099e9ce5508 + * configure.ac (LIB_SCHED_YIELD): Not avoiding defining LIB. + +2016-03-01 NIIBE Yutaka + + Fix for Solaris. + + commit 34b07146bbb0863436fc9381a84314b18bdfb807 + * src/gen-posix-lock-obj.c (USE_DOUBLE_FOR_ALIGNMENT): Check LP64. + +2016-02-26 NIIBE Yutaka + + po: Update Japanese translation. + + commit 49655fb6ef39b307787e1b6e00c996f9c7db64f7 + + + Add support for Solaris, fixing HPPA. + + commit 5168b97fb5e2eebdc99b40f96f9b6289647e87d2 + * configure.ac (HAVE_GCC_ATTRIBUTE_ALIGNED): Remove. + (LIB_SCHED_YIELD): New. Check sched_yield in -lrt. + * src/gen-posix-lock-obj.c (USE_16BYTE_ALIGNMENT): Remove. + (USE_DOUBLE_FOR_ALIGNMENT, USE_LONG_DOUBLE_FOR_ALIGNMENT): New. + * src/syscfg/lock-obj-pub.hppa-unknown-linux-gnu.h: Update. + +2016-02-08 Werner Koch + + build: Create an SWDB file during "make distcheck" + + commit 1e6c5a70b3b51f81d2fc1289129f6c3e1920ebcc + * Makefile.am (distcheck-hook): New. + +2016-01-19 Werner Koch + + Add GPG_ERR_DB_CORRUPTED. + + commit b3bb6e2cc31208a198e74b42ca495c08ebb00fc4 + + +2016-01-13 Marek Vasut + + Add new lock-obj-pub for NIOS2. + + commit 71370060aae7a83f4d6c3b9c924f204a57cc2538 + src/syscfg/lock-obj-pub.nios2-unknown-linux-gnu.h: New. + +2015-12-14 NIIBE Yutaka + + po: Update Japanese translation. + + commit 1814a9bdc15f00bcf6b13ad16857a4f4922fa1d7 + + +2015-12-12 Werner Koch + + Release 1.21. + + commit 425b7687b4f74a22b0aa760262cb8f13ae40dc26 + * configure.ac: Set LT version to C17/A17/Ro. + +2015-12-07 Andre Heinecke + + Fix windows 8bit encoding conversion. + + commit 823e858cdf5eb6b9945a46478f9876819c16bcd3 + * src/w32-gettext.c (wchar_to_native): Convert to ConsoleOutputCP. + +2015-12-03 Justus Winter + + tests: Fix read past buffer. + + commit 68827cbba2083db40df92de1bc449a3d2d0e81ed + * tests/t-poll.c (test_poll): Fix read past buffer. + +2015-11-19 Justus Winter + + Avoid 'malloc' corner case. + + commit 06af687beaa1f8e72a05bd3a057b73fecb158c3d + * src/init.c (_gpgrt_realloc): Avoid calling 'malloc(0)'. + +2015-10-21 Werner Koch + + Add error codes NO_NAME, NO_KEY, and SERVER_FAILURE. + + commit a144fa8863846dc3f6d34731741cd63251620837 + + +2015-10-18 Werner Koch + + estream: Avoid calling write(fd,NULL,n). + + commit 75172adc3b103bd7ef75575a0c0c9c3b63fa4023 + * src/estream.c (es_func_fd_write): Take care of a flush requests. + (es_func_w32_write): Ditto. + (es_func_fp_write): Ditto. + +2015-09-28 Werner Koch + + estream: Keep track of EPIPE. + + commit c09997bc50f3fffaf76d60d2e571b1d85536571e + * src/estream.c (_gpgrt_stream_internal): Add indicators.hup. + (init_stream_obj): Init it. + (es_fill, es_flush, es_seek): Set that. + (_gpgrt_poll): Set event. + + Add GPG_ERR_FALSE and GPG_ERR_TRUE error codes. + + commit d3e9514ff82ff767fc78ce485aef71ba56f3c0d5 + + +2015-09-25 Werner Koch + + estream: Add gpgrt_set_nonblock and gpgrt_poll. + + commit 071c2170479869f4c6694ae85d2b113e84482a01 + * configure.ac (AC_CHECK_HEADERS): Add sys/select.h and sys/time.h. + * src/estream.c: Include both header if available. + (COOKIE_IOCTL_NONBLOCK): New. + (struct estream_cookie_fd): Add field nonblock. + (func_fd_create): Set nonblock from MODEFLAGS. + (es_func_fd_ioctl): New. + (parse_mode): Add modeflag "nonblock". + (es_fill): Map EWOULDBLOCK to EAGAIN. Do not set error indicator for + EAGAIN. + (es_flush, es_seek, es_write_nbf): Map EWOULDBLOCK to EAGAIN. + (do_fdopen): Call COOKIE_IOCTL_NONBLOCK. + (_gpgrt_set_nonblock): New. + (_gpgrt_get_nonblock): New. + (_gpgrt_poll): New. + + * src/gpg-error.h.in (struct _gpgrt_poll_s): New. + (gpgrt_poll_t, es_poll_t): New. + (es_set_nonblock, es_get_nonblock, es_poll): New. + + * src/gpg-error.vers, src/gpg-error.def.in: Add gpgrt_set_nonblock, + gpgrt_get_nonblock, and gpgrt_poll. + * src/visibility.c (gpgrt_set_nonblock, gpgrt_get_nonblock): New. + (gpgrt_poll): New. + + * tests/t-common.h (DIM): New. + * tests/t-poll.c: New. + * tests/Makefile.am (TESTS): Add t-poll. + (t_poll_LDADD): New. + +2015-09-24 Werner Koch + + estream: Replace indicator help functions to ease code reading. + + commit 61d832c53b7db5367a5542347e3454c882d0bf28 + * src/estream.c (es_set_indicators, es_get_indicator): Remove and + change callers to set/get indicators directly. + +2015-09-17 Daniel Kahn Gillmor + + Support i[456]86-pc{,-linux,-kfreebsd}-gnu.h. + + commit 9decdd7bd105ff6a0973cc1f6652e0eb0625d640 + * src/mkheader (canon_host_triplet): Add new entries. + * src/syscfg/lock-obj-pub.i486-pc-gnu.h: Rename to ... + * src/syscfg/lock-obj-pub.i686-pc-gnu.h: this. + * src/syscfg/lock-obj-pub.i486-pc-kfreebsd-gnu.h: Rename to ... + * src/syscfg/lock-obj-pub.i686-pc-kfreebsd-gnu.h: this. + * src/syscfg/lock-obj-pub.i486-pc-linux-gnu.h: Remove. + * src/Makefile.am (lock_obj_pub): Update. + +2015-08-26 Werner Koch + + Release 1.20. + + commit 44caed05ec146654f1ce40bba4b25def83c369db + * configure.ac: Set LT version to C16/A16/R0. + + Add new version macros. + + commit 030ee30c4ae85f2f41ca77651e4a7d7c9993e284 + * src/gpg-error.h.in (GPGRT_VERSION): New. + (GPGRT_VERSION_NUMBER): New. + (GPG_ERROR_VERSION, GPG_ERROR_VERSION_NUMBER): Move to top of file. + + Add macro GPGRT_INLINE and avoid -Wundef warnings. + + commit 9cd3f002addf2acae4a7b0f52f8941e517e83d73 + * src/gpg-error.h.in (GPG_ERR_INLINE): Use #if defined for possible + undefined macros to avoid warnign with GCC's -Wundef option. + (GPGRT_INLINE): New. + +2015-08-26 Yuri Chornoivan + + Update Ukrainian translation. + + commit 17e4f727d9bd8e406bf977af445ef57201d23249 + + +2015-08-25 Werner Koch + + Make configure option --disable-build-timestamp the default. + + commit d328c4d72fa6d224117d7332082509c240a4f2fc + * configure.ac (BUILD_TIMESTAMP): Set to "" by default. + + w32: Make sure the setmode is called. + + commit 1e8d00260a97e0213559c74f687e478e7479a0ea + * src/estream.c (HAVE_DOSISH_SYSTEM): Define if needed. + +2015-07-27 Werner Koch + + Add option --lib-version to the gpg-error tool. + + commit d2e4bb4c77167a1ed10f1017a7d06a822bbd5135 + * src/gpg-error.c (main): Add new option. + +2015-07-24 Werner Koch + + Add new public macros for GCC attributes. + + commit 4e790613f66efcfc62d73722d5f1730a37cb8324 + * src/gpg-error.h.in (GPGRT_GCC_VERSION): New. + (GPGRT_ATTR_NORETURN, GPGRT_ATTR_PRINTF, GPGRT_ATTR_NR_PRINTF): New. + (GPGRT_ATTR_FORMAT_ARG, GPGRT_ATTR_SENTINEL): New. + (GPGRT_ATTR_USED, GPGRT_ATTR_UNUSED, GPGRT_ATTR_DEPRECATED): New. + (GPGRT_ATTR_PURE, GPGRT_ATTR_MALLOC): New. + (GPGRT_HAVE_MACRO_FUNCTION, GPGRT_HAVE_PRAGMA_GCC_PUSH): New. + (_GPGRT_GCC_A_PRINTF): Replace GPGRT_ATTR_PRINTF. + +2015-06-15 Werner Koch + + Allow building with --disable-threads. + + commit 13918d05a333255d22aa6718dd467fcb8eaf80c8 + * src/posix-lock-obj.h (LOCK_ABI_NOT_AVAILABLE): New. + (LOCK_ABI_VERSION): Define depending on USE_POSIX_THREADS. + (_gpgrt_lock_t) [!USE_POSIX_THREADS]: Do not define the union. + * src/gen-posix-lock-obj.c: Take care of USE_POSIX_THREADS. + * src/posix-lock.c (_gpgrt_lock_init, _gpgrt_lock_lock) + (_gpgrt_lock_trylock, _gpgrt_lock_unlock) + (_gpgrt_lock_destroy): Return success for a no-threads version. + * tests/t-lock.c: Disable tests if threads are not available. + * src/mkheader.c (main): Add NO-THREADS to the printed comment. + * configure.ac: Show NO-TRHEADS in the final summary. + +2015-04-14 NIIBE Yutaka + + po: Update Japanese translation. + + commit 4171d61a97d9628532db84b590a9c135f360fa90 + + +2015-04-10 Werner Koch + + Release 1.19. + + commit d77c33ae608d67086ea057cca5ddee99a7202f8b + + + po: Update German translation. + + commit e43045fe63aed0aba6522ebfd6e336b03f250069 + + + w32: Remove compiler warnings. + + commit eaec10f48803ee2232d1c1515fbe8f485c1e84b0 + * src/Makefile.am (pre_mkheader_cmds): Avoid make diagnostic about + failed but ignored command. This confuses Emacs' compiler job parser. + * tests/t-lock.c [W32]: Include time.h. + * src/init.c: Reorganize Windows only code. + (wchar_to_utf8, utf8_to_wchar): Remove unused functions. + (_gpg_err_set_errno): Use only one copy for all platforms. + +2015-03-24 Werner Koch + + Use assert to print diagnosicts before calling abort. + + commit 56feff58d4fab92701ae77a1004af820b85e7f6c + * src/posix-lock.c: Add assert calls. + +2015-03-24 Daniel Kahn Gillmor + + Avoid breakage with gcc 5. + + commit c01c8f0c4f55d76b037c7f6aa44ad25ede18d38a + * src/Makefile.am: Add -P to the C preprocessor when building + mkerrcodes.h, to avoid a noisy intermediate pipeline. + +2015-03-19 Werner Koch + + Add option --defines to gpg-error. + + commit 528ee704f8f9d881ba370dcbfa9194d6704f9a2f + * src/gpg-error.c (main): Add option --help and --defines. + + Add GPG_ERR_LDAP_* error codes. + + commit dc95f1ea1ab902b9f49de651084f514535e4a3fc + * src/err-codes.h.in: Add error codes. + * doc/ldap2gpgerr.c: New. + +2015-03-16 Werner Koch + + Remove useless conditions. + + commit b5cb32f979a80904ea58fc7531e43e2be2270573 + * src/estream.c (fname_set_internal): Remove useless condition. + * src/mkheader.c (main): Ditto. + +2015-03-06 Werner Koch + + Add host-triplet aliasing feature to mkheader. + + commit 4441e96801fdc4c900abae8c0aa0b53e2e26e079 + * src/Makefile.am (lock_obj_pub): Rename i586-pc-linux-gnu to + i686-pc-linux-gnu. Remove i486-pc-linux-gnu. + * src/mkheader.c (canon_host_triplet): New. + (main): Use it. + + w32: Add a manifest to libgpg-error. + + commit 0f814d4c4a285573eef2391c70e21cf8126cafcb + * src/gpg-error.w32-manifest.in: New. + * src/Makefile.am (EXTRA_DIST): Add it. + (versioninfo.lo): Depend on it. + * src/versioninfo.rc.in: Add it. + * configure.ac (AC_CONFIG_FILES): Add it. + (BUILD_VERSION): New. + +2015-02-18 Neal H. Walfield + + Correct URL. + + commit b400d7c65daaf44f227073ddde7d06986afde786 + + +2015-01-30 Werner Koch + + w32: Use -static-libgcc to avoid linking to libgcc_s_sjlj-1.dll. + + commit 8487ec25e1c8f73ca7dc31e5d648cb05eede0f14 + * src/Makefile.am (extra_ltoptions): New. + (libgpg_error_la_LDFLAGS): Use it. + +2015-01-26 Werner Koch + + Release 1.18. + + commit f79688532f100599b1e24dde1429a229524601c9 + * configure.ac: Set LT version to C14/A14/R0. + + po: Update German translation. + + commit 83c0bd462b45ddb75da8c2778ba1fb0c210b53ff + + +2015-01-22 Werner Koch + + Add GPG_ERR_LEGACY_KEY. + + commit 524d5bdee2954337e748428469972957663d497d + + +2015-01-05 Werner Koch + + Avoid false warning about uninitialized var. + + commit 46aaffbe852e334fd1a72affc4a918ceb7dc457b + * src/gpg-error.c (get_err_from_str): Init SAVED_CHAR. + + build: Update to gettext 0.19. + + commit abe43b5cbf066086deb735bba37178b34f12a4cb + * po/Makefile.in.in (MSGMERGE): Remove --previous. + * po/Makevars (MSGMERGE_OPTIONS): Add --previous. + + build: Require automake 1.14. + + commit 3d32de205211ca91d21941273db306a759ccc3ba + * configure.ac (AM_INIT_AUTOMAKE): Add serial-tests. + * tests/Makefile.am (INCLUDES): Replace by AM_CPPFLAGS. + +2014-12-28 Werner Koch + + Add GPG_ERR_REQUEST_TOO_SHORT and GPG_ERR_REQUEST_TOO_LONG. + + commit a672a1510456f3f12769938ab95c50ec6904e42e + + +2014-12-15 Werner Koch + + Fix commit 754a987. + + commit bcd9295d5b9c9f46478bff0680f57bd71b4061f8 + * Makefile.am (DISTCHECK_CONFIGURE_FLAGS): New. + (AUTOMAKE_OPTIONS): Move options to ... + * configure.ac (AM_INIT_AUTOMAKE): .. here. + (BUILD_DOC): Fix commit 754a987. + + Add configure option --disable-doc. + + commit 754a987f6df59e2ba0e69aada65ae4aaf593c148 + * Makefile.am (doc) [!BUILD_DOC]: Do not recurse into doc/. + * configure.ac (BUILD_DOC): New am_conditional and new option. + + Add GPG_ERR_OBJ_TERM_STATE. + + commit 923c4b174520c401a827d8198ebd2dc83666000f + + +2014-12-03 Werner Koch + + Add GPG_ERR_FORBIDDEN. + + commit 149fe98e1279b065edb06958d9a73a0c013c2db9 + + +2014-11-26 Мирослав Николић + + po: Add Serbian translation. + + commit 210126d38096e764dd3a82da45f8b5f66309ecd5 + + +2014-10-25 Daniel Kahn Gillmor + + Add new lock-obj-pub for mips64el-unknown-linux-gnuabi64. + + commit a186f35d05575d6d653e5bebb2dd169d9444af18 + * src/syscfg/lock-obj-pub.mips64el-unknown-linux-gnuabi64.h: New. + * src/Makefile.am (lock_obj_pub): Add. + +2014-10-23 Daniel Kahn Gillmor + + add lock-obj header for or1k-unknown-linux-gnu. + + commit c143fa81462584ad39ea780908266bce3fb9a49e + * src/syscfg/lock-obj-pub.or1k-unknown-linux-gnu.h: new + + add lock-obj for new arch triplet for x86. + + commit d85af2fbac956eb2a8630d1c17b53a7a8760d7a4 + * src/sysconfig/lock-obj-pub.i586-pc-linux-gnu.h: New. + +2014-10-15 Werner Koch + + Release 1.17. + + commit 1d9e4c29fc23da64f964ed3337cd18429e1a2964 + * configure.ac: Set LT version to C13/A13/R0. + + doc: Add a man page for gpg-error-config. + + commit 9d9c25f6d76f1287f193f170ae5534f1ac346db0 + * doc/gpgrt.texi: New. Just a start for now. + * doc/gpl.texi, doc/lgpl.texi: New. Take from Libgcrypt. + * doc/yat2m.c: New. Take from GnuPG master. + * doc/Makefile.am: New. + * configure.ac (AC_CONFIG_FILES): Add doc/Makefile. + * Makefile.am (SUBDIRS): Add doc/. + * build-aux/mdate-sh, build-aux/texinfo.tex: New. + + Fix to help building native on Windows. + + commit 7285a27a7985c10f6778c67b31dd501e6594cb44 + * configure.ac (FORCE_USE_SYSCFG): New am_conditional. + * src/Makefile.am: Use new conditional to decide whether to build the + native lock object header. + +2014-10-03 Werner Koch + + Change gpgrt_pending{,_unlocked} to macros. + + commit 12b5188bd495e45775c34c8e6263e6be177c03da + * src/gpg-error.h.in (gpgrt_pending): Change to a macro. + (gpgrt_pending_unlocked): Change to a macro. + (_gpgrt_pending, _gpgrt_pending_unlocked): New private functions. + * src/visibility.c, src/visibility.h: Change accordingly. + * src/gpg-error.vers, src/gpg-error.def.in: Ditto. + * src/estream.c (_gpgrt_pending_unlocked): Rename to + _gpgrt__pending_unlocked. + (_gpgrt_pending): Rename to _gpgrt__pending. + +2014-10-02 Werner Koch + + w32: Make it build again. + + commit e8b04bed1093a9f1d87c150326e79adfeb02e2b4 + * src/estream.c (es_func_w32_read): Fix var name. + + build: Support SYSROOT based config script finding. + + commit 3ecdcb6ac814e3b63aebbf66729ae6cb67c9f6d2 + * src/gpg-error.m4: Add support for SYSROOT and set + gpg_config_script_warn. Use AC_PATH_PROG instead of AC_PATH_TOOL + because the config script is not expected to be installed with a + prefix for its name. + + Add GPG_ERR_BOGUS_STRING and an experimental gpgrt_pending. + + commit 74abfcf0c3ba7cd6ce36540c70699fc1719248b3 + * src/visibility.c (gpgrt_pending, gpgrt_pending_unlocked): New. + * src/estream.c (_gpgrt_pending, _gpgrt_pending_unlocked): New. + (check_pending): new. + (check_pending_fbf, check_pending_nbf): New. + (es_func_mem_read, es_func_fd_read, es_func_w32_read) + (es_func_fp_read, es_fill): Take care of the special 0 value for SIZE. + +2014-09-29 Daniel Kahn Gillmor + + GNU calls little-endian powerpc64 powerpc64le, not powerpc64el. + + commit d2757001c5719ca8c8bd6aa2e2e2d9a299fb76c6 + * src/Makefile.am (lock_obj_pub): fix powerpc64el to powerpc64le + * src/sysconfig/lock-obj-pub.powerpc64el-unknown-linux-gnu.h : move to + src/sysconfig/lock-obj-pub.powerpc64le-unknown-linux-gnu.h + +2014-09-29 Werner Koch + + Add error codes for use by a TLS library. + + commit d58fa35e89feddb71feeba8e39a016cd37c4be29 + + +2014-09-24 Daniel Kahn Gillmor + + Allow ./configure to explicitly set libgpg-error's build timestamp. + + commit d620005fd1a655d591fccb44639e22ea445e4554 + * configure.ac: add --enable-build-timestamp + +2014-09-24 Werner Koch + + Add new error source GPG_ERR_SOURCE_TLS. + + commit efb2442458c8dd8d5af5a533dc09370b54f5f86f + + +2014-09-23 Daniel Kahn Gillmor + + Add new lock-obj-pub for sparc64-unknown-linux-gnu. + + commit f227618e9e0d01e9dd1afbd91f9a509a532717eb + * src/syscfg/lock-obj-pub.sparc64-unknown-linux-gnu.h: New. + * src/Makefile.am (lock_obj_pub): Add. + + Add new lock-obj-pub for powerpc64el-unknown-linux-gnu. + + commit 33e5504fbb5e5e2ff44023c0a22dfb668ff8b10f + * src/syscfg/lock-obj-pub.powerpc64el-unknown-linux-gnu.h: New. + * src/Makefile.am (lock_obj_pub): Add. + +2014-09-18 Werner Koch + + Release 1.16. + + commit 8f3187fe56cb8e535e3ceff75fdd4e128070af57 + * configure.ac: Set LT version to C12/A12/R2. + + Add new lock-obj-pub for Apple iOS. + + commit cc4b0caa57a595a3727e51e061c519232f7bdb05 + * src/syscfg/lock-obj-pub.aarch64-apple-darwin.h: New. + * src/syscfg/lock-obj-pub.arm-apple-darwin.h: New. + +2014-09-12 Werner Koch + + Fix es_fclose for streams opened with "samethread". + + commit c307e1f801cd9a25c4a5b9a90073362219d52ee6 + * src/estream.c (destroy_stream_lock): New. + (es_create, do_close): Use new wrapper function. + + Fix a prototype. + + commit e1882ee8c541020ec590bf096508ca5b6d2ab944 + * src/gpgrt-int.h: s/off_t/gpgrt_off_t/. + +2014-09-11 Werner Koch + + Release 1.15. + + commit 6ebcd696fdbc0485099fba987c0c302cb46dd116 + * configure.ac: Set LT version to C12/A12/R1. + + Fix build problems with non-gmake (ie. AIX). + + commit 316171204d9a995f8b85431830bbc225ea144b48 + * src/Makefile.am: Do not distribute gpg-error.h. + (lock-obj-pub.native.h): Prepend a "./" to match the dependency. + + Fix problems with ssize_t and off_t. + + commit 5a4684f3b0db4cd5c13f94b1319c245ef96ce91d + * configure.ac (AC_SYS_LARGEFILE): New. + (AC_CHECK_HEADERS): Check for stdint.h. + (AC_CHECK_SIZEOF): Add for int, long and long long. + (REPLACEMENT_FOR_OFF_T): New ac_define. + * src/mkheader.c (have_stdint_h, have_w32_system, have_w64_system) + (replacement_for_off_type, stdint_h_included): New. + (xfree, xstrdup): New. + (parse_config_h): New. + (write_special): Support "define:gpgrt_off_t", "define:gpgrt_ssize_t", + "api_ssize_t" tags. + (main): Add config.h arg. Call parse_config_h. Fix substitute code. + * src/Makefile.am (gpg-error.h): Pass config.h to mkheader. + + * src/gpg-error.h.in: Include definitions for gpgrt_ssize_t and + gpgrt_off_t. Let mkheader insert ssize_t keywords. Chnage all off_t + to gpgrt_off_t. + * src/estream.c: Change all off_t to gpgrt_off_t. Chnage all ssize_t + to gpgrt_ssize_t. + * src/visibility.c (gpgrt_fseeko): Use gpgrt_off_t. + (gpgrt_ftello): Ditto. + (gpgrt_getline): Use gpgrt_ssize_t. + (gpgrt_read_line): Ditto. + + Fix compiler warning for w32. + + commit 4138644d74f127c1f4abf7455fe1e21f56d6e07e + * src/syscfg/lock-obj-pub.mingw32.h (GPGRT_LOCK_INITIALIZER): Add + mssing braces. + +2014-09-08 Werner Koch + + Release 1.14. + + commit 25f312dbb82722d23ad9faed8341923af6d3663c + * configure.ac: Set LT version to C12/A12/R0. + + po: Update de.po. + + commit 2ff05feae6c5090081612a7d9a787298f37d46a2 + + +2014-08-26 Werner Koch + + Add gpgrt_set_alloc_func. + + commit 7fdca61bcf60e730177889fbbd2f935ba33ae0c3 + * src/visibility.c (gpgrt_set_alloc_func): New. + * configure.ac (_ESTREAM_PRINTF_REALLOC): Define. + (_ESTREAM_PRINTF_EXTRA_INCLUDE): Define. + * src/estream.c (mem_alloc, mem_realloc, mem_free): Simplify. + (_gpgrt_free): Remove. + * src/init.c (custom_realloc): New var. + (_gpgrt_set_alloc_func): New. + (_gpgrt_realloc, _gpgrt_malloc, _gpgrt_free): New. + + * src/visibility.h (gpg_err_deinit): Mark as visible. + + Export missing init functions. + + commit d9d5b61a9f70556e8fc0775f1501380f65ce9502 + * src/gpg-error.h.in (gpgrt_init): New macro. + (gpgrt_check_version): New prototype. + * src/init.c (_gpg_err_init): Rename from gpg_err_init. + (_gpg_err_deinit): Rename from gpg_err_deinit. + * src/visibility.c (gpg_err_init): New. + (gpg_err_deinit): New. + (gpgrt_check_version): New. + * src/gpg-error.vers (gpg_err_init, gpg_err_deinit): Add missing + symbols. + (gpgrt_check_version): New. + * src/gpg-error.def.in (gpg_err_init, gpg_err_deinit): Add missing + symbols. + (gpgrt_check_version): New. + * src/gpg-error.c (main): Use gpgrt_init macro. + + Include required headers into gpg-error.h. + + commit 320f1b864553f105217ad6b0c70598f9a48c6aaa + * src/gpg-error.h.in: Include stdarg.h. + +2014-08-25 Werner Koch + + Replace locking code in estream functions. + + commit fc651665010056e6184e8514e5c5436427d7052d + * src/posix-lock.c: Add weak program for pthread_mutex_trylock. + (_gpgrt_lock_trylock): New. + * src/w32-lock.c (_gpgrt_lock_init): Add missing return statement. + (_gpgrt_lock_trylock): New. + * src/visibility.c (gpgrt_set_syscall_clamp): New. + (gpgrt_lock_trylock): New. + (gpgrt_vsnprintf): Fix symbol name. + * src/init.c (DllMain): Mark unused arg. + * src/estream.c: Replace npth mutexes by our own locks. Replace yeild + macro by _gpgrt_yield. + (pre_syscall_func, post_syscall_func): New. + (do_deinit): Clear both new vars. + (es_func_fd_read, es_func_fd_write): Call pre and post syscall + functions instead of the former SYSCALL macros. + (es_func_w32_read, es_func_w32_write): Ditto. + (es_func_fd_seek, es_func_w32_seek, es_func_fp_read) + (es_func_fp_write, es_func_fp_seek, es_func_fp_destroy): Bracket + syscalls with the pre- and post-syscall fucntions. + (do_npth_read, do_npth_write): Remove. + (_gpgrt_es_init): Remove call to mutex init. It is now statically + initialized. + (_gpgrt_set_syscall_clamp): New. + (es_create): Destroy stream lock on error. + (do_close): Destroy stream lock. + + Remove GnuPG specific code. + + commit 98781deb0b1787fd7eaabee27ef6a06d37195267 + * src/estream.c (es_write_sanitized_utf8_buffer): Remove. + + Add test for the estream printf functions. + + commit ce31fe792b5f8adf81710c1bf5986cd10636e16b + * tests/t-printf.c: New. + * configure.ac: Check for vasprintf. + + Add gpgrt_snprintf and gpgrt_vsnprintf. + + commit 8a5f2680daa5ea0280ef195efe3050df7bb06e78 + + + Finish inclusion of estream into the API. + + commit e5304d2c8aaaf1682707caa5694316640a18de57 + + + Implement symbol visibility. + + commit 216e7def2118a1774fa7ebeb45b8635b9fe6ba42 + * configure.ac: New option --enable-ld-version-script. + (GPGRT_USE_VISIBILITY): New ac_define. + (HAVE_LD_VERSION_SCRIPT): New am_conditional. + * src/gpg-error.vers: New. + * src/gpgrt-int.h: New. + * src/visibility.c, src/visibility.h: New. Lot of changes to symbold + names. + + First set of changes to include estream into the API. + + commit 6714d41af5b3f4d447eb0caea0ede38b753397f8 + * configure.ac (AH_BOTTOM): Define GPGRT_ENABLE_ES_MACROS. + * src/gpg-error.h.in: include stdio.h. Include most of the estream + functions and rename structures and types. + * src/estream.h: Rewrite. Include only gpg-error.h and local + prototypes. + * src/estream.c: Rename types and macros. + * src/estream-printf.c (_gpgrt_estream_snprintf): Prefix public + functions with _gpgrt_. + + Fix some minor estream things. + + commit 8d57ce619aa49862caeee30181fbbd9c76846554 + * m4/estream.m4: Check for memrchr. + * src/estream.c (memrchr) [!HAVE_MEMRCHR]: New. + * src/init.c: Include estream.h + (real_init): Init estream. + + Add missing redefine macros to cleanup the external symbols. + + commit b84c1ee0d637108a74066e0da50cb132273020e9 + + + Add estream code from GnuPG. + + commit 2b74237d19e44f7173bb052677f0ec35e6ff51b0 + * src/estream-printf.c, src/estream-printf.h: New. + * src/estream.c, src/estream.h: New. + * m4/estream.m4: New. + * src/Makefile.am (libgpg_error_la_SOURCES): Add new files. + * configure.ac (AH_BOTTOM): Define estream prefix. + : Add useful gcc warning options. + (estream_INIT): Call. + +2014-08-12 Joe Hansen + + Update Danish translation. + + commit 1be556e5bb1fb7262a1b5630ac939cfcaadc7100 + * po/da.po: Update. + +2014-08-10 Werner Koch + + tests: Fix compiler warning. + + commit ab5eff46116a9a246ffb2c083bec637d0321d0cb + * tests/t-lock.c: Include header vor getpid. + (revision_thread): Init "i" to avoid compiler warning. + +2014-08-06 NIIBE Yutaka + + Update ja.po. + + commit 7b7e08e6f3561724006b63679c2500a62fc73837 + + +2014-08-05 Werner Koch + + Use 16 byte alignment for hppa-unknown-linux-gnu. + + commit 3325403c0dd2949bf52efa1b9a5b5cf3191110f9 + * configure.ac (HAVE_GCC_ATTRIBUTE_ALIGNED): New. + * src/gen-posix-lock-obj.c (USE_16BYTE_ALIGNMENT): Set for HPPA-Linux. + (main): Enforce alignment if needed. + * src/syscfg/lock-obj-pub.hppa-unknown-linux-gnu.h: Use 16 byte + alignment. + +2014-07-27 Daniel Kahn Gillmor + + Add new lock-obj-pub.*.h from debian buildds. + + commit 8338a4ba93367974758dc5e195f67e9d171d4086 + * src/syscfg/lock-obj-pub.aarch64-unknown-linux-gnu.h: New. + * src/syscfg/lock-obj-pub.alpha-unknown-linux-gnu.h: New. + * src/syscfg/lock-obj-pub.arm-unknown-linux-gnueabi.h: New. + * src/syscfg/lock-obj-pub.arm-unknown-linux-gnueabihf.h: New. + * src/syscfg/lock-obj-pub.hppa-unknown-linux-gnu.h: New. + * src/syscfg/lock-obj-pub.i486-pc-gnu.h: New. + * src/syscfg/lock-obj-pub.i486-pc-kfreebsd-gnu.h: New. + * src/syscfg/lock-obj-pub.i486-pc-linux-gnu.h: New. + * src/syscfg/lock-obj-pub.m68k-unknown-linux-gnu.h: New. + * src/syscfg/lock-obj-pub.mips-unknown-linux-gnu.h: New. + * src/syscfg/lock-obj-pub.mipsel-unknown-linux-gnu.h: New. + * src/syscfg/lock-obj-pub.powerpc-unknown-linux-gnu.h: New. + * src/syscfg/lock-obj-pub.powerpc64-unknown-linux-gnu.h: New. + * src/syscfg/lock-obj-pub.s390x-ibm-linux-gnu.h: New. + * src/syscfg/lock-obj-pub.sh4-unknown-linux-gnu.h: New. + * src/syscfg/lock-obj-pub.sparc-unknown-linux-gnu.h: New. + * src/syscfg/lock-obj-pub.x86_64-pc-kfreebsd-gnu.h: New. + * src/syscfg/lock-obj-pub.x86_64-pc-linux-gnu.h: New. + * src/syscfg/lock-obj-pub.x86_64-pc-linux-gnux32.h: New. + * src/Makefile.am (lock_obj_pub): Add new files. + +2014-06-30 Daniel Kahn Gillmor + + Improve logging in a test module. + + commit c7c41582574304974feac8bbd89b1460fbf6c92c + * tests/t-version.c (main): Print program name. + +2014-06-25 Werner Koch + + Add missing prototype for build tool. + + commit 51f9a8180ecbc24ed092bef5f2aa920a76769dcb + * src/gen-posix-lock-obj.c: Include string.h. + +2014-06-10 Werner Koch + + New error code GPG_ERR_KEY_DISABLED. + + commit 3fada688c0df6e3140e4fcaf59b9bcfcc7a70bf4 + + +2014-04-15 Werner Koch + + Release 1.13. + + commit 1900266b743cabdb39a0d6f8dd00d187a2ad2c97 + * configure.ac: Set LT version to C11/A11/R0. + + Update pl.po. + + commit db6e26cad81957729adc9549e4c6afe28bc55d76 + + + Add code GPG_ERR_KEY_ON_CARD. + + commit d4b83dbad235973e521eb12b680ee43cfb5cbc9a + + +2014-01-29 Werner Koch + + Fix a syscfg/ file name. + + commit bb5318aa5536fa48ec240c2ff48b9e2e1d9916ef + * src/syscfg/lock-obj.arm-unknown-linux-androideabi.h: Rename to ... + * src/syscfg/lock-obj-pub.arm-unknown-linux-androideabi.h: this. + * src/Makefile.am (lock_obj_pub): Fix file name. + +2014-01-28 Werner Koch + + Fix the name of the file in the comment of the output. + + commit 6245bf65fc2554c7c103324d451036de08869458 + * src/gen-posix-lock-obj.c (main): Chnage comment in created file. + +2014-01-25 Werner Koch + + Add lock info for arm-unknown-linux-androideabi. + + commit e1aa030d7655743f0c3cdd5f7b26ae1b4665fbc6 + * src/syscfg/lock-obj.arm-unknown-linux-androideabi.h: New. Provided + by Hans-Christoph Steiner. + * src/Makefile.am (lock_obj_pub): Add file. + +2014-01-24 Werner Koch + + tests: Call srand for each thread under Windows. + + commit 8e352780fd0e2fbc8f4c4971aae188d62df24d0a + * tests/t-lock.c (accountant_thread) [W32]: Call srand. + + Do not use the threadlib macros for Windows. + + commit 2e4c5963119dc02cac7b8f0dfb46572c43d1ebe7 + * configure.ac: Move platform detection before gl_THREADLIB_EARLY. Do + not use gl_THREADLIB for Windows. + + Make multi-threading flags available via gpg-error-config. + + commit f209d163a8167caa6910cd367aba923f703ac69e + * m4/threadlib.m4: Set THREADLIB_CPPFLAGS. + * src/gpg-error-config.in: Add option --mt. + * configure.ac: Add support for the --mt option. + * src/gpg-error.m4: Add ac_subst GPG_ERROR_MT_CFLAGS and + GPG_ERROR_MT_LIBS. + + Allow using gpgrt_lock_init on an unitialized variable. + + commit 4e8a88e7632b1f1d2b31ae738a159802549882c3 + * src/posix-lock.c (gpgrt_lock_init): Detect unitialized lock var. + * src/w32-lock.c (gpgrt_lock_init): Ditto. + +2014-01-17 Werner Koch + + Move version number first in the Posix lock-obj. + + commit e07538c0ed3c5cb3d870a490a4c12bef4375278a + * src/posix-lock-obj.h (_gpgrt_lock_t): Swap VERS and MTX and put MTX + into a union. + * src/posix-lock.c (gpgrt_lock_lock): Adjust for this change. + * src/gen-posix-lock-obj.c (main): Change output accordingly. + + Extend the platform dependent build rules. + + commit d83b12213231443b93de39863b916ada6232035a + * src/mkheader.c (mk_include_name): New. + (include_file): Implement '&' substitution. + (try_include_file): New. + (write_special): Use try_include_file and syscfg/. + (main): Add a new arg. + * configure.ac (CROSS_COMPILING): New am_conditional. + (HOST_TRIPLET_STRING): New ac_define. + * src/gen-posix-lock-obj.c (main): Print the host triplet. + * src/w32-lock-obj-pub.in: Move to ... + * src/syscfg/lock-obj-pub.mingw32.h: here. + * src/Makefile.am (lock_obj_pub): New. + (pre_mkheader_cmds): New. + (gpg-error.h): Run pre_mkheader_cmds. + (parts_of_gpg_error_h, lock-obj-pub.native.h): Do not use when + cross-compiling. + +2014-01-16 Werner Koch + + Fix linking for last change on non-ELF platforms. + + commit 4f9b13e99bdfed886dadfd1b70a69af3747ebc98 + * src/Makefile.am (libgpg_error_la_LIBADD): Add LIBTHREAD. + + Add gpgrt_lock_ functions. + + commit ff937c39febe63d52c55590d8e3bd3a460f26651 + * src/gpg-error.h.in (GPGRT_LOCK_DEFINE): New. + (gpgrt_lock_init): New. + (gpgrt_lock_lock): New. + (gpgrt_lock_unlock): New. + (gpgrt_lock_destroy): New. + (gpgrt_yield): New. + * src/gpg-error.def.in: Add new functions. + * m4/lock.m4, m4/threadlib.m4: New. Taken from current gnulib. + * configure.ac: Call gl_LOCK. Check size of pthread_mutex_t. Add + LIBTHREAD to GPG_ERROR_CONFIG_LIBS. + * src/err-codes.h.in (GPG_ERR_INV_LOCK_OBJ): New. + * src/gen-posix-lock-obj.c: New. + * src/gen-w32-lock-obj.c: New. + * src/lock.h, src/thread.h: New. + * src/posix-lock-obj.h, src/w32-lock-obj.h: New. + * src/posix-lock.c, src/w32-lock.c: New. + * src/posix-thread.c, src/w32-thread.c: + * src/w32-lock-obj-pub.in: New. + * src/mkheader.c (include_file): Support build time include files. + (write_special): Add keyword "include:lock-obj". + * src/Makefile.am: + (posix-lock-obj-pub.in): New rule. + (noinst_PROGRAMS): Add gen-*-lock-obj helpers. + + * tests/t-common.h: New. + * tests/t-lock.c: New. + * tests/Makefile.am (t_lock_LDADD): Add new test. + +2014-01-14 Werner Koch + + Improve maintainability by rewriting the mkheader helper. + + commit 78a06348fb07f2dce861615cc6d19964818f7334 + * src/mkheader.c: New. Based on the mkheader from Libassuan. + * src/mkheader.awk: Remove. + * src/errnos.in: Add trailing linefeed. + * src/gpg-error.h.in: Change meta include directives for use with + mkheader.c. + * src/Makefile.am (EXTRA_DIST): Replace mkheader.awk by mkheader.c + (BUILT_SOURCES): Remove extra-h.in. + (CLEANFILES): Remove extra-h.in. Add mkheader.c. + (parts_of_gpg_error_h): New. + (extra-h.in): Remove rule. + (mkheader): Add rule. + (gpg-error.h): Change rule to use mkheader. + +2014-01-10 Werner Koch + + po: Update de.po. + + commit c1871fddf85cdddc33c1b35d5f1c8bae76388ee5 + + + Use the generic autogen.sh script. + + commit e3ff40a78e9e95e1296b66f9c0d3df905c8af0d3 + * Makefile.am (EXTRA_DIST): Add autogen.rc remove config.rpath. + * autogen.rc: New. + * autogen.sh: Update from current GnuPG. + + Move helper scripts to build-aux. + + commit 69c15393d1dac28e08c3b84b1aea286f12327847 + * compile, config.guess, config.rpath, config.sub + * depcomp, install-sh, ltmain.sh, missing: Move to build-aux/. + * configure.ac (AC_CONFIG_AUX_DIR): New. + +2013-12-09 Werner Koch + + Add build support for ppc64le. + + commit 0b192cff772bd416dc85b8140b9eb0d52e4175dd + * config.guess, config.sub: Update to latest version (2013-11-29). + * m4/libtool.m4: Add patches for ppc64le. + +2013-12-09 David 'Digit' Turner + + Update libtool to support Android. + + commit bf0d67dbfa4161e529781d6dfbfcce7126c3bf22 + * m4/libtool.m4: Add "linux*android*" case. Taken from the libtool + repository. + +2013-11-17 Werner Koch + + Add GPG_ERR_MAC_ALGO. + + commit b70a430d020e8541f66cca38c00355bab7bb1017 + + +2013-07-15 Werner Koch + + w32: Fix corrupted string output. + + commit 52e1f2e131b422fdb66abeaf4a8f084689b39bf7 + * src/w32-gettext.c (get_string): Pass the nul of the utf-8 string to + the conversion function but keep TRANSLEN without the nul. + +2013-06-24 Werner Koch + + Release 1.12. + + commit 12243cebd558dcadf8e85eea39b6db5f0b314667 + * configure.ac: Set LT version to C10/A10/R0. + + Update German translation. + + commit f85ef07dca7c931d63b202d94bfaccba0a30f7f6 + + +2013-06-17 Werner Koch + + Add hack to have different names for 64 bit Windows DLLs. + + commit ca46b9a7bccb2eab085fc45722ffca1210f48223 + * ltmain.sh: Prefix the SO number for W64 with a "6". + + Support building for w64. + + commit 1ca9b0dec0bfee560ce43d9dac6a26557ebe67a1 + + +2013-05-23 Werner Koch + + w32: Fix installing of .def file. + + commit db438148df9623528aa7305b6d56edd23db8cbbe + * src/Makefile.am (install-def-file): Create libdir first. + + Fix libtool 2.4.2 to correctly detect .def files. + + commit dd05f3790e536dec6ed56087780a1065ca66371e + * ltmain.sh (sed_uncomment_deffile): New. + (orig_export_symbols): Uncomment def file before testing for EXPORTS. + * m4/libtool.m4: Do the same for the generated code. + +2013-04-11 Werner Koch + + Add GPG_ERR_*CRYPT_CTX* and GPG_ERR_BROKEN_*KEY. + + commit d2e6d96dfd2acc855b244a972269adfcf477cd10 + * src/err-codes.h.in (GPG_ERR_NO_CRYPT_CTX): New. + (GPG_ERR_WRONG_CRYPT_CTX, GPG_ERR_BAD_CRYPT_CTX): New. + (GPG_ERR_CRYPT_CTX_CONFLICT): New. + (GPG_ERR_BROKEN_PUBKEY, GPG_ERR_BROKEN_SECKEY): New. + +2013-02-25 Werner Koch + + Release 1.11. + + commit 3367ff0aa51b6685e37b749b3179643b82d23064 + * configure.ac: Set LT version to C9/A9/R0. + + * Makefile.am (GITLOG_TO_CHANGELOG): New. + (gen-ChangeLog): Use --tear-off. + * build-aux/gitlog-to-changelog: Remove. + + Update helper scripts. + + commit b0ce47b730452bb28d5f46db3857c9efa5f9f51e + * compile, config.guess, config.rpath, config.sub, depcomp, + * install-sh, mkinstalldirs: Update to current versions from gnulib. + +2013-02-23 Werner Koch + + Add translation to Ukrainian. + + commit 47ff6a21c6d84acebef3ff20d982a6c255a6d282 + * po/uk.po: New. + * po/LINGUAS: Add uk.po + + Add translation to Esperanto. + + commit 95c63baa0516592ec1a1c045565d6f992cc807eb + * po/eo.po: New. + * po/LINGUAS: Add eo.po. + + Add version macros and check function. + + commit e6943de88627c6662fba3fe905c8761dbf0ccfa1 + * configure.ac (VERSION_NUMBER): New ac_subst. + (BUILD_FILEVERSION): Build on all platforms + (BUILD_TIMESTAMP): Try to use an ISO string. + * src/Makefile.am (extra-h.in): Add new version numbers. + * src/versioninfo.rc.in: Update copyright year. + * src/version.c: New. + (gpg_error_check_version): New API. + * src/gpg-error.h.in: Add gpg_error_check_version prototype. + * src/gpg-error.def.in: Add gpg_error_check_version + * tests/t-version.c: New. + * tests/Makefile.am (TESTS): Add t-version.c + + * src/gpg-error-config.in: s/VERSION/PACKAGE_VERSION/. + +2013-02-22 Werner Koch + + Fix the alias mechanism for --with-libgpg-error-prefix. + + commit 056cc2d0dfef023fda47ce377d3ee544612526a3 + * src/gpg-error.m4: Do not use the no-action branch in AC_ARG_WITH. + +2012-11-16 Werner Koch + + Switch to the new automagic beta numbering scheme. + + commit 3977201d2a82fcbe0341660e07a3b0d5c790f927 + * configure.ac: Change to a git only revision id setup. + (BUILD_FILEVERSION): Use revision id for this. + * src/versioninfo.rc.in (FileVersion): Use LT version. + + Update to libtool 2.4.2. + + commit 6971fe55fb76f3c93058ebdef37dc179dff5d651 + + + Add new source id for Libassuan. + + commit d447a2150c235878e2c80afcc99e207755cfd2f9 + * src/err-sources.h.in (GPG_ERR_SOURCE_ASSUAN): New. + + Improve parsing of the GIT revision number. + + commit b2e4d03c88823151aa30f8a878ad1a30618d1340 + * configure.ac (git_revision): Use git rev-parse. + + Fix non-portable use of chmod in autogen.sh. + + commit 17c8c16ee2dcb33abb7fdf50c40015f1b9d13689 + * autogen.sh: Remove option -c from chmod. + +2012-08-09 Werner Koch + + Update Italian translation. + + commit 3034b80debc15e6372fbc36a1814b2d273d9e4a7 + + +2012-08-09 Jordy Provost + + Typo fix. + + commit 9216a742c75432fb2ea0ee1e1818459014e051c5 + * src/err-codes.h.in: Unify uppercase. + +2012-08-09 Freek de Kruijf + + Update Dutch translation. + + commit 10373c0d9f4a557ee9af5f1569749b9697a7ae33 + * po/nl.po: Update. + +2012-08-09 Petr Pisar + + Update Czech translation. + + commit f95162ecc92f338bf244ffdb402ade617d207d7a + * po/cs.po: Update. + +2012-08-09 Joe Hansen + + Add Danish translation. + + commit 7adbeeb806d7cd373a159b0acfc9b733a3295356 + * po/da.po: New. + * po/LINGUAS: Add da.po. + +2012-08-09 David Prévot + + Update French translation. + + commit 42471f9cbd59d427c9e1a8bf0267835f1395c6b4 + * po/fr.po: Update, proofread by Jordy Provost + + Keep previous msgids of translated messages. + + commit f7db2dceb8d1da2606d039c04bc84f331f9cfe89 + * po/Makefile.in.in: Add --previous option to msgmerge. + +2012-08-07 Werner Koch + + Add Japanese translation. + + commit 4fef48a0868ca1379d016f41c9d810857c00655f + * po/ja.po: New. + * po/LINGUAS: Add ja.po. + + Update German translation. + + commit 2ed3e70f0aeec41ece79d96a8ea6d114addf954d + * po/de.po: Update. + +2012-06-20 Rafaël Carré + + Use CPPFLAGS when generating mkerrcodes.h. + + commit c35dbfdaa2e30e08185e4a468278a29e2c48b500 + * src/Makefile.am (mkerrcodes.h): Use CPPFLAGS. + +2011-12-01 Werner Koch + + Remove non-source file from the repo. + + commit a7eb1bec2b76318bd17d4413d7f44197a241e3bc + * po/remove-potcdate.sed: Remove. + + Fix for newer autoconf version. + + commit 5a0d2a5abc0a707c20449b6afd37daa9fd373a18 + * Makefile.am (EXTRA_DIST): Fix filename. + * configure.ac (my_full_version): New. + (AC_INIT): Use new macro. Change bug address to the bug tracker URL. + + Generate the ChangeLog from commit logs. + + commit 9d75d671d66386ad862db0466c4dd67a246dfe72 + * build-aux/gitlog-to-changelog: New script. Taken from gnulib. + * build-aux/git-log-fix: New file. + * build-aux/git-log-footer: New file. + * doc/HACKING: New file. + * ChangeLog: New file. + * Makefile.am (EXTRA_DIST): Add new files. + (gen-ChangeLog): New. + (dist-hook): Run gen-ChangeLog. + + Rename all ChangeLog files to ChangeLog-2011. + +2011-12-01 Werner Koch + + NB: Changes done before December 1st, 2011 are described in + per directory files named ChangeLog-2011. See doc/HACKING for + details. + + ----- + Copyright (C) 2011 Free Software Foundation, Inc. + + Copying and distribution of this file and/or the original GIT + commit log messages, with or without modification, are + permitted provided the copyright notice and this notice are + preserved. diff --git a/ChangeLog-2011 b/ChangeLog-2011 new file mode 100644 index 0000000..474164c --- /dev/null +++ b/ChangeLog-2011 @@ -0,0 +1,1211 @@ +2011-12-01 Werner Koch + + NB: ChangeLog files are no longer manually maintained. Starting + on December 1st, 2011 we put change information only in the GIT + commit log, and generate a top-level ChangeLog file from logs at + "make dist". See doc/HACKING for details. + +2011-11-28 Jim Meyering + + accept --with-libgpg-error-prefix as well as --with-gpg-error-prefix + * src/gpg-error.m4 (AM_PATH_GPG_ERROR): Also accept + --with-libgpg-error-prefix=PFX, for consistency with our three + library sibling packages. + +2011-08-23 Werner Koch + + * src/err-codes.h.in: Add GPG_ERR_DUP_KEY and GPG_ERR_AMBIGUOUS. + +2011-04-06 Werner Koch + + * autogen.sh: Support option --build-w64. + * configure.ac (HAVE_W64_SYSTEM): New. + + * src/gpg-error.m4: Test whether gpg-error-config exists. + +2011-02-23 Werner Koch + + * autogen.sh: Check git setup. + + * src/gpg-error-config.in: Add option --host. + * configure.ac (GPG_ERROR_CONFIG_HOST): New. + * src/gpg-error.m4: Use AC_PATH_TOOL to look for + gpg-error-config. Print a warning if host does not match. + +2011-02-01 Werner Koch + + * src/err-codes.h.in: Add GPG_ERR_INV_CURVE and GPG_ERR_UNKNOWN_CURVE. + +2011-01-06 Werner Koch + + * src/err-codes.h.in: Add GPG_ERR_NO_KEYSERVER. + +2010-12-23 Werner Koch + + * configure.ac: Support git_revision. + +2010-11-01 Marcus Brinkmann + + * src/w32-gettext.c (CreateFileA): Rename to ... + (MyCreateFileA): ... this, but provide macro CreateFileA. + +2010-10-31 Werner Koch + + * src/init.c (abort): Use TerminateProcess; exit would call atexit + functions. + +2010-10-29 Marcus Brinkmann + + * src/w32-gettext.c: Guard include of . Do not + include . + (CreateFileA) [HAVE_W32CE_SYSTEM]: New wrapper function. + (load_domain): Use native Windows API. + + * src/init.c (TLS_OUT_OF_INDEXES) [HAVE_W32CE_SYSTEM, + !TLS_OUT_OF_INDEXES]: Define it. + (abort) [!__MINGW32CE__]: Define it. + +2010-10-28 Werner Koch + + * src/mkstrtable.awk: s/inline/GPG_ERR_INLINE/ + * src/w32-gettext.c: Include gpg-error.h and replace all + __inline__ by GPG_ERR_INLINE. + (module_init): Use _GPG_ERR_CONSTRUCTOR. + (_gpg_w32__init_gettext_module): Build also if we don't have + constructors + * src/gpg-error.h.in (GPG_ERR_INLINE) [_MSC_VER]: Define as __inline. + +2010-10-26 Werner Koch + + Release 1.10. + + * configure.ac: Set LT version to C8/A8/R0. + * config.guess: Update to version 2010-09-24. + * config.sub: Update to version 2010-09-11. + +2010-10-20 Werner Koch + + * potomo: New. Copied from GnuPG. + * Makefile.am (install-data-hook) [W32]: New. + + * src/init.c (get_locale_dir): Strip the "bin" part. + * src/gpg-error.c (get_locale_dir): Ditto. + +2010-09-30 Werner Koch + + * src/err-codes.h.in: Add GPG_ERR_FULLY_CANCELED. + +2010-09-16 Werner Koch + + * src/w32-gettext.c (module_init): Do not set a constructur if not + build as DLL. + (_gpg_w32__init_gettext_module): New. + +2010-09-16 gettextize + + * configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.17. + +2010-09-16 Werner Koch + + * src/err-codes.h.in: Add GPG_ERR_MISSING_ISSUER_CERT. + + * src/Makefile.am (err-sources.h, err-codes.h): Built them in the + source directory. + +2010-09-02 Werner Koch + + * src/err-codes.h.in: Add GPG_ERR_NOT_INITIALIZED. + +2010-08-19 Werner Koch + + * configure.ac (AH_BOTTOM): Define GPG_ERR_ENABLE_ERRNO_MACROS. + * src/w32ce-add.h (strerror) [!GPG_ERR_ENABLE_ERRNO_MACROS]: Do + not define. + +2010-07-21 Werner Koch + + Release 1.9. + + * configure.ac: Set LT version to C7/A7/R0. + +2010-07-20 Werner Koch + + * src/init.c (DllMain) [!DLL_EXPORT]: Do not build. + (gpg_err_init) [W32][!DLL_EXPORT]: Init TLS. + (gpg_err_deinit): New. + * src/gpg-error.def.in: Add gpg_err_deinit. + * src/gpg-error.h.in: Add gpg_err_deinit. + +2010-07-05 Werner Koch + + * src/err-codes.h.in (GPG_ERR_TOO_MANY, GPG_ERR_LIMIT_REACHED): New. + +2010-06-18 Werner Koch + + * src/err-codes.h.in (GPG_ERR_MISSING_KEY): New. + +2010-05-06 Werner Koch + + Release 1.8. + + * configure.ac: Set LT version to C6/A6/R0. + +2010-04-14 Werner Koch + + * src/init.c (_gpg_w32ce_get_errno): Add native error mapping. + * src/Makefile.am (mkw32errmap.map.c): New. + * src/mkw32errmap.c (struct table_s): Add field W32CODE2. + (table): Init this field. + (main): Add option --map. + +2010-03-15 Werner Koch + + * src/mkheader.awk: Add emacs local-var line. + + * src/w32-add.h (gettext_localename): Fix type in name. + +2010-03-09 Werner Koch + + * src/w32-add.h [!GPG_ERR_ENABLE_GETTEXT_MACROS]: Do not provide + gettext macros. + +2010-03-08 Werner Koch + + * src/w32-add.h (_GPG_ERR_ATTR_FORMAT_ARG): New. + (_gpg_w32_gettext, _gpg_w32_dgettext, _gpg_w32_dngettext): Use it. + +2010-03-01 Werner Koch + + * src/mkw32errmap.c: Map ESPIPE. + +2010-02-17 Werner Koch + + * src/Makefile.am: Revert last change. + (gpg_extra_headers): New. + (nobase_include_HEADERS): Rename to include_HEADERS and remove + extra_headers. + (mkerrcodes.h): Depend on gpg_extra_headers. + (install-data-local): New. + (gpg-extra/errno.h): Create gpg-extra dir if needed. + +2010-02-17 Werner Koch + + * src/Makefile.am (extra_headers): Remove. + +2010-01-21 Werner Koch + + * configure.ac (have_w32ce_system): Initialize to no. + + * src/mkstrtable.awk (END): Do not print PREFIX before + LAST_MSGSTR. + + * src/init.c (get_locale_dir): Rework to match what gnupg is doing. + (get_root_key, read_w32_registry_string): Remove. + * src/gpg-error.c (get_locale_dir): Replace by code from init.c + (get_root_key, read_w32_registry_string): Remove. + +2010-01-20 Werner Koch + + * src/init.c (gpg_err_init): Factor code out to .. + (real_init): .. new. + + * src/Makefile.am (gpg_error_SOURCES): Remove arch_sources. + (export_symbols): Do not prefix gpg-error-def with srcdir. + +2010-01-19 Werner Koch + + * src/init.c (DllMain): Call _w32_gettext_init. + (get_tls): Use it also for standard Windows. + (DllMain): Ditto. + (struct tls_space_s): Move to .. + (get_tls): Make global. + * src/init.h: .. New. + * src/gettext.h: Do not include w32-gettext.h. + * src/w32-gettext.c: Replace by version from GnuPG. + (my_nl_locale_name) [W32CE]: Do not use getenv. Use + GetSystemDefaultLCID. + (struct loaded_domain): Use uint16_t for NSTRINGS and MAPPED to + save space. + (load_domain): Check for too large MO files. + (utf8_to_wchar): Use gpg_err_set_errno. + (bindtextdomain): Rename to _gpg_w32_bindtextdomain. + (textdomain): Rename to _gpg_w32_textdomain. + (gettext): Rename to _gpg_w32_gettext. + (dgettext): Rename to _gpg_w32_dgettext. + (ngettext): Remove. + (gettext_localename): Rename to _gpg_w32_gettext_localename. + (gettext_select_utf8): Rename to _gpg_w32_gettext_use_utf8. + (_gpg_w32_bindtextdomain): Change to only register the directory. + Return the current directory if asked to. + (do_gettext): Add DOMAINNAME arg and take care of it. + * src/w32-add.h: New. + * src/w32-gettext.h: Remove. + * src/Makefile.am (extra-h.in): Process w32-add.h. + (arch_sources): Remove w32-gettext.h. + +2010-01-18 Werner Koch + + * src/init.c (wchar_to_utf8, utf8_to_wchar): New. + + * src/gpg-error.c (main): Add option --list. + +2010-01-18 Werner Koch + + * ltmain.sh (wrappers_required): Don't set for mingw32ce. + + * tests/Makefile.am (extra_includes): New. + * tests/t-syserror.c (main): Use gpg_err_set_errno. + + * src/w32ce-add.h: New. + * src/Makefile.am (EXTRA_DIST): Add it + (extra-h.in): New rule + (gpg-error.h): Pass extra-h.in to mkheader. + * src/mkheader.awk (extra_body): New. + + * src/gpg-error.c (get_err_from_number): Use gpg_err_set_errno. + + * src/mkw32errmap.c: New + * src/gpg-error.def: Rename to .. + * src/gpg-error.def.in: .. this. + (_gpg_errno_location): New. + * src/init.c (struct tls_space_s, tls_index): New. + (get_tls, _gpg_errno_location, DllMain): New. + (read_w32_registry_string) [W32CE]: Don't expand envvars. + (_gpg_w32ce_strerror): New. + * src/Makefile.am (extra_headers, extra_cppflags): New. + (include_HEADERS): Add extra_headers. Prefix with nobase_. + (libgpg_error_la_CPPFLAGS, gpg_error_CPPFLAGS) + (mkerrcodes.h): Add extra_cppflags. + (RCCOMPILE): Replace libgpg_error_la_CPPFLAGS by direct inclusion + of -DLOCALEDIR. + * configure.ac (HAVE_W32CE_SYSTEM): New AM_CONDITIONAL and + AC_DEFINE. + (GPG_ERROR_CONFIG_ISUBDIRAFTER): New. + * src/gpg-error-config.in <--libs>: Replace fixed -lgpg-error + by subst variable. + (isubdirafter): New. + <--cflags>: Take subst variable in account. Add idirafter stuff. + +2009-10-26 Marcus Brinkmann + + * src/gpg-error.h.in (GPG_ERR_SOURCE_DIM): Reduce to 128. + +2009-09-29 Werner Koch + + * src/err-codes.h.in (GPG_ERR_NO_ENGINE): New. + +2009-09-21 Werner Koch + + * src/err-sources.h.in (GPG_ERR_SOURCE_G13): New. + +2009-08-20 Werner Koch + + * src/err-codes.h.in: s/octadecimal/octal/. Reported by Petr Pisar. + +2009-07-23 Werner Koch + + * src/err-codes.h.in: Add GPG_ERR_NOT_ENABLED. + +2009-07-17 Marcus Brinkmann + + * src/mkerrnos.awk: Output code to cause WSA Errors to be found + from gpg error codes. + * README: Add problem of translating error codes back and forth. + + * src/mkerrcodes1.awk: Output code to cause WSA Errors to be + transparently translated. + * src/code-from-errno.c [HAVE_W32_SYSTEM]: Don't include winsock2.h. + (w32_special_errnos) [HAVE_W32_SYSTEM]: Removed. + (gpg_err_code_from_errno) [HAVE_W32_SYSTEM]: Remove special case. + * README: Document problem with printing some WSA Errors. + +2009-06-23 Marcus Brinkmann + + Update to libtool 2.2.6a. + * configure.ac: Invoke AC_CONFIG_MACRO_DIR. + (AC_LIBTOOL_WIN32_DLL, AC_LIBTOOL_RC): Replace by ... + (LT_PREREQ, LT_INIT, LT_LANG): ... these. + * config.guess, config.sub, install-sh, ltmain.sh, m4/libtool.m4: + Updated to libtool 2.2.6a. + * m4/ltoptions.m4, m4/ltsugar.m4, m4/ltversion.m4, + m4/lt~obsolete.m4: New files from libtool 2.2.6a. + * src/Makefile.am (LTRCCOMPILE): Refactor with ... + (RCCOMPILE): ... this new macro. Add $(libgpg_error_la_CPPFLAGS). + (SUFFIXES): Add .lo. + (.rc.o): Change to ... + (.rc.lo): ... this implicit rule. + (gpg_error_res_ldflag): Removed. + (gpg_error_res): Use libtool object file name here. + (install-def-file): Fix typo. + (libgpg_error_la_LDFLAGS): Remove gpg_error_res_ldflag usage. + (libgpg_error_la_LIBADD): Add gpg_error_res. + +2008-11-26 Werner Koch + + Release 1.7. + + * configure.ac: Set LT version to C5/A5/R0. + +2008-11-12 Werner Koch + + * src/err-codes.h.in: Add GPG_ERR_NO_PASSPHRASE and GPG_ERR_NO_PIN. + +2008-11-08 Moritz + + * lang/cl/gpg-error.lisp ("gpg_err_code_from_syserror"): Fix + defcfun: removed "(void)". + + * lang/cl/gpg-error.lisp (size-t): Wrong call to defctype: + function accepts optional, not keyword argument. + (gpg-error-t): Likewise. + +2008-10-29 Marcus Brinkmann + + * src/mkstrtable.awk: Make generated code -W clean to silence gcc + warnings. + +2008-08-06 Werner Koch + + * src/err-codes.h.in (GPG_ERR_NOT_OPERATIONAL): New. + +2008-04-01 Werner Koch + + * configure.ac (AC_INIT): Fix m4 quoting. + +2007-12-11 Werner Koch + + * Makefile.am (EXTRA_DIST): Add COPYING. + +2007-10-29 Werner Koch + + Released 1.6. + + * configure.ac: Set LT version to C4/A4/R0. + + * config.guess, config.sub: Updated. + + * src/err-sources.h.in: (GPG_ERR_SOURCE_KLEO): New. + + * w32-gettext.c (SUBLANG_BENGALI_BANGLADESH): Fix to 2 as per MSDN. + (SUBLANG_PUNJABI_PAKISTAN): Remove as it is not in MSDN. + (SUBLANG_ROMANIAN_MOLDOVA): Remove as it is not in MSDN. + (SUBLANG_ROMANIAN_ROMANIA): Change to value 1 as per MSDN. + +2007-09-27 Marcus Brinkmann + + * src/Makefile.am (%.o): Replace pattern rule with suffix rule. + (SUFFIXES): New variable. + +2007-09-27 Werner Koch + + * src/err-sources.h.in (GPG_ERR_SOURCE_GPA): New. + * src/err-codes.h.in (GPG_ERR_UNFINISHED): New. + +2007-08-03 Marcus Brinkmann + + * configure.ac: Call AM_PROG_CC_C_O. Allow --disable-languages. + * autogen.sh: Use = not == in test. + * lang/cl/Makefile.am: Do not use :=, but =. + * Makefile.am [!LANGUAGES_SOME]: Don't add lang to subdirs. + * m4/inttypes-h.m4, m4/lock.m4, m4/visibility.m4: New files. + +2007-05-19 Marcus Brinkmann + + * lang/cl/gpg-error.lisp (gpg-err-source-t): Add + :gpg-err-source-any. + +2007-06-18 Werner Koch + + * src/code-from-errno.c (w32_special_errnos) [W32]: New. This is + to provide some common mappings for winsocket error codes. + (gpg_err_code_from_errno, gpg_err_code_from_syserror): Use it. + +2007-05-09 Werner Koch + + * src/gpg-error.m4: Print found version on success. + +2006-12-09 Marcus Brinkmann + + * src/Makefile.am (EXTRA_DIST): Add README. + * src/README: New file. + +2006-12-01 Marcus Brinkmann + + * src/gpg-error.c (get_err_from_number): Fix last change. + + * src/gpg-error.c (get_err_from_number): Support source and code + number in split format like "7.17". + +2006-11-30 Werner Koch + + Released 1.5. + + * configure.ac: Set LT version to C3/A3/R1. + + * README: Switch to tar.bz2 and sha1sum. + + * src/gpg-error.c (main): Add option --version. + + * autogen.sh (FORCE): Add option --force. + + * intl/: Removed. + * Makefile.am (SUBDIRS): Removed intl. + * configure.ac (AM_GNU_GETTEXT): Use external flag + * src/Makefile.am: Removed -I../intl. + +2006-11-23 Werner Koch + + * configure.ac: Display configuration status after AC_OUTPUT. + (AC_INIT): Use SVN revision magic. + (AC_GNU_SOURCE): New. + +2006-11-23 gettextize + + * configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.15. + +2006-11-15 Werner Koch + + * autogen.sh: Add convenience option --build-amd64. + +2006-10-20 Werner Koch + + * Makefile.am (stowinstall): New convenience target. + +2006-09-18 Werner Koch + + * src/gpg-error.def: Added gpg_err_code_from_syserror. + +2006-09-14 Werner Koch + + Released 1.4. + + * configure.ac: Set LT version to C3/A3/R0. + (AB_INIT): New. + + * autogen.sh (--build-w32): Better cross-compiler locating. + + * src/strerror.c (system_strerror_r): Made static. + + * tests/t-syserror.c: New. + * tests/Makefile.am (TESTS): Added new test. + + * lang/cl/gpg-error.lisp ("gpg_err_code_from_syserror"): New. + (gpg-err-code-from-syserror): New. + (gpg-error-from-syserror): New. + * lang/cl/gpg-error-package.lisp: Export new functions + + * src/gpg-error.h.in (gpg_error_from_syserror): New. + * src/code-from-errno.c (gpg_err_code_from_errno): Cosmetic change + to first check whether ERR is zero. + (gpg_err_code_from_syserror): New. + +2006-09-06 Werner Koch + + * src/err-codes.h.in: Add GPG_ERR_UNKNOWN_OPTION and + GPG_ERR_UNKNOWN_COMMAND. + +2006-09-05 Werner Koch + + * src/err-sources.h.in (GPG_ERR_SOURCE_ANY): New. This is so that + we have source distinguished from the Unknown one but declaring + that it is an gpg-error style error code. + + * src/err-codes.h.in: Added GPG_ERR_ASS_* codes, rabnge 257-281. + (GPG_ERR_MISSING_ERRNO): New. + +2006-07-04 Marcus Brinkmann + + * src/init.c (get_locale_dir): Return NULL instead of garbage. + * src/gpg-error.c (get_locale_dir): Likewise. + Reported by Simon Josefsson . + +2006-05-30 Marcus Brinkmann + + * lang/cl/gpg-error.asd.in (gpg-error): Add "depends-on" on cffi. + +2006-05-29 Marcus Brinkmann + + * src/init.c (gpg_err_init) [!ENABLE_NLS]: Do not initialize the + locale. + * src/gpg-error.c (i18n_init) [!ENABLE_NLS]: Likewise. + Patch submitted by Nils Durner . + +2006-05-25 Marcus Brinkmann + + * lang/cl/gpg-error.asd: Renamed to ... + * lang/cl/gpg-error.asd.in: ... this. + * configure.ac (AC_CONFIG_FILES): Add lang/cl/gpg-error.asd.in. + + * lang/cl/mkerrcodes.awk, lang/cl/gpg-error-package.lisp, + lang/cl/gpg-error.lisp, lang/cl/gpg-error.asd, lang/cl/Makefile.am + (clfilesdir): Fix package and file names. + + * lang/cl/Makefile.am (clfilesdir): Use datadir, not prefix. + +2006-05-05 Marcus Brinkmann + + * configure.ac (AC_CONFIG_FILES): Add lang/Makefile and + lang/cl/Makefile. + * Makefile.am (SUBDIRS): Add lang. + * lang: New directory. + * lang/README, lang/Makefile.am: New files. + * lang/cl: New directory. + * lang/cl/Makefile.am, lang/cl/README, lang/cl/gpg-error.asd, + lang/cl/gpg-error-package.lisp, lang/cl/gpg-error.lisp, + lang/cl/mkerrcodes.awk: New files. + +2006-03-14 Marcus Brinkmann + + Released 1.3. + + * configure.ac (LIBGPG_ERROR_LT_REVISION): Bump for release. + + Many files regenerated. + * src/Makefile.am (gpg_error_CPPFLAGS, libgpg_error_la_CPPFLAGS): + Add -I../intl. + * Makefile.am (SUBDIRS): Add intl. + * configure.ac (AC_CONFIG_FILES): Add intl/Makefile. + (AM_GNU_GETTEXT_VERSION): Bump to 0.14.5. + +2006-03-06 Marcus Brinkmann + + * configure.ac (min_automake_version): Bump to 1.9.6. + * mkinstalldirs, depcomp, compile, INSTALL, COPYING, missing, + install-sh: Update from automake 1.9.6. + ltmain.sh: Update from libtool 1.5.22. + +2006-03-03 Marcus Brinkmann + + * configure.ac (LIBGPG_ERROR_LT_CURRENT, LIBGPG_ERROR_LT_AGE): + Bump for release. + (LIBGPG_ERROR_LT_REVISION): Reset to 0 for release. + +2005-11-02 Werner Koch + + * src/Makefile.am (gpg_error_SOURCES): Include ARCH_SOURCES. + * src/gpg-error.c [W32]: Include gettext.h instead of libintl.h. + + * configure.ac (AH_BOTTOM): Define ENABLE_NLS for W32 builds. + * src/w32-gettext.h (dgettext): Changed prototype from + libintl_dgettext. + * src/w32-gettext.c: Replaced use of WIN32 by HAVE_W32_SYSTEM on + demand of the holy GNUquisition. + (bindtextdomain, textdomain, dgettext): Need to cast the const way + from the return value. + +2005-10-26 Werner Koch + + * Makefile.am: Used dist-bzip2 option. + +2005-10-25 Marcus Brinkmann + + * src/w32-gettext.c (get_string): Remove extra arguments to + utf8_to_native_invocation. + (utf8_to_wchar, wchar_to_native): New function. + (utf8_to_native): Rewritten. + + * src/Makefile.am (gpg_error_CPPFLAGS): New variable. + * src/gpg-error.c (i18n_init): Don't return anything. + + * src/Makefile.am (arch_sources): New variable. + (libgpg_error_la_SOURCES): Add $(arch_sources). + * src/gettext.h [HAVE_W32_SYSTEM]: Include w32-gettext.h. + * src/w32-gettext.h: New file. + * src/w32-gettext.c: New file. + * src/gpg-error.h.in: Check for gcc's constructor attribute. + Use it for gpg_err_init. + (GPG_ERR_INITIALIZED): Define if constructor is available. + * src/gpg-error.c (main) [GPG_ERR_INITIALIZED]: Don't invoke + gpg_err_init. + (i18n_init): Call bindtextdomain as well. Now that gpg-error has + its own gettext implementation, we can't rely on it anymore. + Also, repeat all the w32 stuff for fetching the registry. + +2005-10-23 Marcus Brinkmann + + * src/Makefile.am (libgpg_error_la_SOURCES): Add init.c. + * src/init.c: New file. + * src/gpg-error.h.in (gpg_error_init): New function. + * src/gpg-error.def: Add gpg_err_init. + * src/gpg-error.c: Remove SIMPLE_GETTEXT stuff. + (i18n_init): Don't bind text domain. + (main): Call gpg_err_init. + +2005-10-20 Marcus Brinkmann + + * configure.ac: Instead checking for windres and dlltool, invoke + AC_LIBTOOL_WIN32_DLL and AC_LIBTOOL_RC. + * src/Makefile.am [HAVE_W32_SYSTEM]: Use libtool, which simplifies + the rules. + +2005-10-02 Marcus Brinkmann + + * configure.ac: Escape arguments in AC_INIT invocation. + * config.guess, config.sub, ltmain.sh: Update. + +2005-08-19 Werner Koch + + * configure.ac: Add code to allow building a W32 DLL. + * src/Makefile.am: Changed to allow building for W32. + * src/versioninfo.rc.in: New. + * src/gpg-error.def: New. + +2005-06-20 Marcus Brinkmann + + Released 1.1. + + * configure.ac: Bump up LIBGPG_ERROR_LT_REVISION, update version + field. + +2005-06-16 Marcus Brinkmann + + * src/mkerrcodes.awk: Fix comment. Allow any non-empty line to + start the processing, not only lines starting with numbers. + Reported by Guillaume Libersat . + +2005-01-05 Marcus Brinkmann + + * configure.ac: Check for locale.h. + +2005-04-20 Werner Koch + + * src/err-codes.h.in: Add GPG_ERR_LOCKED. + +2005-04-18 Werner Koch + + * src/err-codes.h.in: Add GPG_ERR_UNKNOWN_EXTN and + GPG_ERR_UNKNOWN_CRIT_EXTN. + +2004-12-18 Werner Koch + + * autogen.sh: Add option --build-w32. + +2004-09-14 Marcus Brinkmann + + * src/gpg-error.m4: Add copyright note. + + * configure.ac: Call AC_CANONICAL_HOST. Suppress warning about + lack of strerror_r on all Solaris platforms. + +2004-07-30 Werner Koch + + Released 1.0. + + * configure.ac: Bumbed version to 1.0, LT to C1/A1/R3. + +2004-07-15 Werner Koch + + * src/err-codes.h.in: Renamed description for CARD_RESET. + +2004-06-28 Werner Koch + + * src/err-codes.h.in: Add GPG_ERR_INV_REQUEST. + +2004-06-08 Marcus Brinkmann + + * src/Makefile.am (mkerrcodes): Prefix mkerrcodes.c with $(srcdir) + to fix VPATH build. + +2004-05-25 Marcus Brinkmann + + * src/err-codes.h.in: Add GPG_ERR_PROTOCOL_VIOLATION and + GPG_ERR_INV_MAC. + +2004-04-23 Marcus Brinkmann + + * src/Makefile.am (mkerrcodes): Do not use $< in non-inference rule. + (code-from-errno.h): Likewise. + +2004-04-22 Marcus Brinkmann + + * src/Makefile.am (gpg_error_CPPFLAGS): New variable. + (localedir): Likewise. + * gpg-error.c: Include the gettext headers. + (init_i18n): New function. + (main): Call init_i18n, gettextize messages. + +2004-04-02 Thomas Schwinge + + * autogen.sh: Added ACLOCAL_FLAGS. + +2004-04-19 Marcus Brinkmann + + * src/gpg-error.m4: Quote first argument to AC_DEFUN. + + * src/mkerrcodes.awk: Allow whitespace before expanded + preprocessor macro (ie, the error code value). Needed for Solaris 2.8. + +2004-04-08 Moritz Schulte + + * src/gpg-error.c (main): Return zero on success. + +2004-03-09 Marcus Brinkmann + + * libgpg-error.spec.in (%files): Add gpg-error. Submitted by + Albrecht Dreß . + + * src/mkerrcodes.c (main): Fix type of argv. Return something. + +2004-03-09 Werner Koch + + * Makefile.am (dist-hook): Create a VERSION file for use by mkdiff. + + * src/Makefile.am (mkerrcodes.h): Let CPP work on a temporary file. + (CLEANFILES): Add that temporary file. + * configure.ac (AC_PROG_CPP): Added. + + * src/err-codes.h.in: Removed trailing spaces from + GPG_ERR_NOT_LOCKED. + +2004-03-08 Werner Koch + + * src/err-sources.h.in: Added GPG_ERR_SOURCE_GSTI. + +2004-03-07 Marcus Brinkmann + + Released 0.7. + + * configure.ac: Bumbed up LIBGPG_ERROR_LT_REVISON. + + * src/gpg-error-config.in: Fix last change. + * src/gpg-error-config.in (Options): Do not emit include and lib + directory for prefix "/usr" or "". + + * tests/Makefile.am (INCLUDES): Change to -I$(top_srcdir)/src to + -I$(top_builddir). + +2004-03-01 Marcus Brinkmann + + * configure.ac: Define CC_FOR_BUILD. + * src/Makefile.am (BUILT_SOURCES): Add gpg-error.h. + (EXTRA_DIST): Add mkerrcodes.awk and mkerrcodes.c. + (CLEANFILES): Add mkerrcodes.h and mkerrcodes. + (mkerrcodes.h): New target. + (mkerrcodes): New target. + (code-from-errno.h): Rewritten. + + * src/errnos.in: Remove include statement (which was ignored + anyway). + * src/mkerrcodes.awk: New file. + * src/mkerrcodes.c: New file. + +2004-02-27 Marcus Brinkmann + + * src/Makefile.am (noinst_PROGRAMS): Rename to ... + (bin_PROGRAMS): ... this. + + * src/gpg-error.h.in: Add extern "C" closure for C-- compilers. + + * src/Makefile.am (noinst_PROGRAMS): New variable. + (gpg_error_LDADD): New variable. + (gpg_error_SOURCES): New variable. + (EXTRA_DIST): Add mkheader.awk and gpg-error.h.in. + (BUILT_SOURCES): Add err-sources-sym.h, err-codes-sym.h and + errnos-sym.h. + (CLEANFILES): Add err-sources-sym.h, err-codes-sym.h, + errnos-sym.h and gpg-error.h. + (err-codes.h, err-sources.h): Add -v textidx=3 to mkstrtable.awk + invocation. + (err-codes-sym.h): New target. + (err-sources-sym.h): New target. + (gpg-error.h): New rule. + * src/mkstrtable.awk: Skip the second field (which contains the + error code symbol). + (FS): Allow more than one tab as field separator. + Allow to specify the field to be used as text with the variable + textidx. + Allow to suppress gettext markers in the output. + Allow to specify a prefix to the messages. + Allow to specify a namespace for the variable and macro names. + * src/mkerrnos.awk (FS): Initialize. Understand variable + errnoidx, which defaults to 2, to cope with the error names being + in a different column than the first. + * src/mkerrcodes1.awk: Likewise. Use \t as separator. + * src/mkheader.awk: New file. + * src/errnos.in: Add error code numbers (relativ to + GPG_ERR_SYSTEM_ERROR). + * src/strerror-sym.c: New file. + * src/strsources-sym.c: New file. + * src/err-codes.h.in: Add the error code symbol for every error + code. + (GPG_ERR_BUFFER_TOO_SHORT): Fix error code (it is 200, not 199). + * src/err-sources.h.in: Likewise. + * src/gpg-error.h.in: New file. + * src/gpg-error.h: File removed. + * src/gpg-error.c: New file. + +2004-02-18 Werner Koch + + * src/gpg-error-config.in: Ignore setting of --prefix. + +2004-02-11 Werner Koch + + * autogen.sh (check_version): Removed bashism and simplified. + +2004-02-03 Werner Koch + + * src/gpg-error.h: Added GPG_ERR_NOT_LOCKED. + +2003-12-22 Werner Koch + + * src/gpg-error.h: Added GPG_ERR_LOCALE_PROBLEM. + +2003-12-12 Werner Koch + + * src/err-codes.h.in: s/revoced/revoked/. + +2003-12-08 Werner Koch + + * README.CVS: Enhanced. + + * autogen.sh: New. + * Makefile.am (EXTRA_DIST): Added autogen.sh. + +2003-11-14 Werner Koch + + * configure.ac: Bumbed version number to 0.7. + + Released 0.6. + + * configure.ac: Bumbed up LIBGPG_ERROR_LT_REVISON. + +2003-11-13 Werner Koch + + * src/gpg-error.h, src/err-codes.h.in: Removed: GPG_ERR_IO_ERROR, + GPG_ERR_FILE_ERROR, GPG_ERR_READ_ERROR, GPG_ERR_WRITE_ERROR, + GPG_ERR_LOCK_ERROR. + + * src/gpg-error.h (GPG_ERR_SOURCE_DIRMNGR): Fixed typo. + +2003-11-12 Werner Koch + + * src/gpg-error.h, src/err-codes.h.in: Added these codes: + GPG_ERR_INV_ATTR, GPG_ERR_NO_VALUE, GPG_ERR_NOT_FOUND, + GPG_ERR_VALUE_NOT_FOUND, GPG_ERR_SYNTAX, GPG_ERR_INV_CRL, + GPG_ERR_BAD_BER, GPG_ERR_INV_BER, GPG_ERR_ELEMENT_NOT_FOUND, + GPG_ERR_IDENTIFIER_NOT_FOUND, GPG_ERR_INV_TAG, GPG_ERR_INV_LENGTH, + GPG_ERR_INV_KEYINFO, GPG_ERR_UNEXPECTED_TAG, GPG_ERR_NOT_DER_ENCODED, + GPG_ERR_NO_CMS_OBJ, GPG_ERR_INV_CMS_OBJ, GPG_ERR_UNKNOWN_CMS_OBJ, + GPG_ERR_UNSUPPORTED_CMS_OBJ, GPG_ERR_UNSUPPORTED_ENCODING, + GPG_ERR_UNSUPPORTED_CMS_VERSION, GPG_ERR_UNKNOWN_ALGORITHM, + GPG_ERR_ENCODING_PROBLEM, GPG_ERR_INV_STATE, GPG_ERR_DUP_VALUE, + GPG_ERR_MISSING_ACTION, GPG_ERR_MODULE_NOT_FOUND, + GPG_ERR_INV_OID_STRING, GPG_ERR_INV_TIME, GPG_ERR_INV_CRL_OBJ, + GPG_ERR_UNSUPPORTED_CRL_VERSION, GPG_ERR_INV_CERT_OBJ, + GPG_ERR_UNKNOWN_NAME, GPG_ERR_IO_ERROR, GPG_ERR_FILE_ERROR, + GPG_ERR_READ_ERROR, GPG_ERR_WRITE_ERROR, GPG_ERR_LOCK_ERROR, + GPG_ERR_BUFFER_TOO_SHORT. + +2003-11-06 Werner Koch + + * src/gpg-error.h, src/err-sources.h.in: Added error sources for + Libksba and Dirmngr. Added GPG_ERR_TRUNCATED. + +2003-11-03 Werner Koch + + * src/gpg-error.h: Allow GPG_ERR_INLINE to get overriden, so that + one can use the -D flag to specify the inline keyword. Suggested + by Philip Brown. + +2003-10-28 Moritz Schulte + + * src/gpg-error.h (gpg_err_code_t): Added: + GPG_ERR_NO_ENCODING_METHOD, GPG_ERR_NO_ENCRYPTION_SCHEME, + GPG_ERR_NO_SIGNATURE_SCHEME. + * src/err-codes.h.in: Likewise. + +2003-10-25 Werner Koch + + * src/strerror.c: Include stdio.h for snprintf + prototype. Suggested by papadopo@shfj.cea.fr, fixes #gnupg/214. + +2003-10-11 Moritz Schulte + + * src/gpg-error.m4: Do not ask gpg-error-config to change the + prefix, if --with-gpg-error-prefix=... is used. + +2003-10-06 Marcus Brinkmann + + Released 0.5. + + * configure.ac (LIBGPG_ERROR_LT_CURRENT, LIBGPG_ERROR_LT_AGE): + Bump up by one. + +2003-09-30 Marcus Brinkmann + + * src/gpg-error.h: Include . + (gpg_strerror_r): Change prototype to match POSIX. Rewritten for + that prototype. + * src/strerror.c: Include . + (gpg_strerror_r, system_strerror_r): Change prototype to match + POSIX. Rewritten for that prototype. Rewritten for that + prototype. + +2003-09-30 Werner Koch + + * src/gpg-error.h: Add PIN_NOT_SYNCED. + +2003-09-13 Marcus Brinkmann + + * configure.ac: Invoke AC_FUNC_STRERROR_R. + * src/gpg-error.h (gpg_strerror_r): New prototype. + * src/strerror.c (system_strerror_r): New function. + (gpg_strerror_r): New function. + +2003-09-04 Marcus Brinkmann + + * libgpg-error.spec.in: New file. + * Makefile.am (EXTRA_DIST): Add libgpg-error.spec.in. + * AUTHORS (Maintainer): Add Robert Schiele as contributor. + +2003-09-03 Marcus Brinkmann + + * src/gpg-error-config.in: Rewritten. + +2003-09-03 Marcus Brinkmann + + * configure.ac (AC_INIT): Bump up version number. + +2003-09-03 Marcus Brinkmann + + Released 0.4. + + * src/gpg-error.h: Define GPG_ERR_INLINE to nothing if the + compiler does not implement C99. + * configure.ac: (AC_INIT): Bump up version number. + +2003-09-02 Moritz Schulte + + * src/gpg-error.h (gpg_err_code_t): Added: GPG_ERR_NO_PRIME. + * src/err-codes.h.in: Likewise. + +2003-08-19 Marcus Brinkmann + + * src/gpg-error.h (GPG_ERR_SYSTEM_ERROR): Fix value (should have + been 2^15, was 2^14). + (GPG_ERR_CODE_DIM): Fix value (should have been 65536, was 32768). + Change the error codes of all system errors to have the + GPG_ERR_SYSTEM_ERROR bit set. + +2003-08-06 Marcus Brinkmann + + * code-from-errno.c, code-to-errno.c, err-codes.h.in, + err-sources.h.in, errnos.in, gpg-error.h, strerror.c, strsource.c: + Fix typo in copyright notice. + +2003-07-31 Marcus Brinkmann + + * README: Clarify copyright conditions. + * src/mkstrtable.awk: Don't claim in the copyright information + that this program is part of libgpg-error. + * src/mkerrnos.awk: Likewise. + * src/mkerrcodes1.awk: Likewise. + * src/mkerrcodes2.awk: Likewise. + +2003-07-31 Marcus Brinkmann + + * src/strerror.c (gpg_strerror): Use CODE, not ERR to map error + code to errno. + + * configure.ac (AC_INIT): Bump version to 0.3. + + Released 0.3. + +2003-07-30 Marcus Brinkmann + + * configure.ac (AC_INIT): Bump version to 0.2. + + Released 0.2. + +2003-07-17 Werner Koch + + * src/gpg-error.h: Add HARDWARE, PIN_BLOCKED and USE_CONDITIONS. + +2003-07-16 Moritz Schulte + + * src/gpg-error.h (gpg_err_code): Cast return value to + gpg_err_code_t. Thanks to Ralf Schneider + . + (gpg_err_source): Cast return value to gpg_err_source_t. Thanks + to Ralf Schneider . + +2003-07-15 Moritz Schulte + + * src/gpg-error.m4 (AM_PATH_GPG_ERROR): Use `0.0' instead of + `0.0.0' in case no version number is given, since the following + sed commands expect the former form, not a triplet. + +2003-07-06 Marcus Brinkmann + + * src/gpg-error.h (GPG_ERR_INLINE): Define macro. Use it instead + of __inline__ in this file. + +2003-06-30 Werner Koch + + * src/gpg-error.h: Add WRONG_CARD. + +2003-06-22 Marcus Brinkmann + + * src/gpg-error.h: Fix value of GPG_ERR_CANCELED. + +2003-06-06 Marcus Brinkmann + + * configure.ac: Define GPG_ERROR_CONFIG_LIBS and + GPG_ERROR_CONFIG_CFLAGS. + Add src/gpg-error-config to config files. + * src/Makefile.am (EXTRA_DIST): Add gpg-error-config.in and + gpg-error.m4. + (bin_SCRIPTS): New variable. + (m4datadir, m4data_DATA): New variables. + * src/gpg-error-config.in: New file. + * src/gpg-error.m4: New file. + + Released 0.1. + +2003-06-05 Marcus Brinkmann + + * src/gpg-error.h (gpg_err_make_from_errno): Fix implementation. + + * src/gpg-error.h (gpg_err_code_t): Add GPG_ERR_SIG_EXPIRED. + (err-codes.h.in): Likewise. + + * src/gpg-error.h (gpg_error_from_errno): Change return type to + gpg_error_t. + +2003-06-04 Marcus Brinkmann + + * src/gpg-error.h (gpg_err_code_t): Add GPG_ERR_INV_ENGINE, + GPG_ERR_PUBKEY_NOT_TRUSTED, GPG_ERR_DECRYPT_FAILED, + GPG_ERR_KEY_EXPIRED. + (gpg_make_error): Rename to gpg_err_make. + (gpg_error): Use here. + * tests/t-strerror.c (main): And here. + (gpg_make_error_from_errno): Rename to gpg_err_make_from_errno. + + * src/gpg-error.h (gpg_make_error_from_errno): New inline function. + (gpg_error_from_errno): Likewise. + + * src/code-from-errno.c (gpg_err_code_from_errno): Handle the case + of no error at all. + +2003-06-04 Marcus Brinkmann + + * src/gpg-error.h (gpg_err_source_t): Add GPG_ERR_SOURCE_USER_1 to + GPG_ERR_SOURCE_USER_4. + (gpg_err_code_t): Add GPG_ERR_USER_1 to GPG_ERR_USER_16. + * src/err-sources.h.in: Likewise. + * src/err-codes.h.in: Likewise. + + * src/gpg-error.h: Rename GPG_ERR_INVALID_RESPONSE to + GPG_ERR_INV_RESPONSE, GPG_ERR_INVALID_CARD to GPG_ERR_INV_CARD, + GPG_ERR_INVALID_INDEX to GPG_ERR_INV_INDEX, GPG_ERR_INVALID_ID to + GPG_ERR_INV_ID, GPG_ERR_AGENT_ERROR to GPG_ERR_AGENT, + GPG_ERR_ASSUAN_ERROR to GPG_ERR_ASSUAN, GPG_ERR_PIN_ENTRY_ERROR to + GPG_ERR_PIN_ENTRY, GPG_ERR_DIRMNGR_ERROR to GPG_ERR_DIRMNGR, + GPG_ERR_CARD_ERROR to GPG_ERR_CARD, GPG_ERR_CONFIGURATION_ERROR to + GPG_ERR_CONFIGURATION, GPG_ERR_SCDAEMON_ERROR to GPG_ERR_SCDAEMON. + +2003-06-03 Werner Koch + + * src/gpg-error.h, src/err-codes.h.in: Add codes for TIMEOUT, + INV_HANDLE, NOTHING_FOUND, WRONG_BLOB_TYPE and MISSING_VALUE. + * src/gpg-error.h, src/err-sources.h.in: Add KEYBOX which is the + keybox subsystem of GnuPG. + +2003-06-02 Moritz Schulte + + * src/gpg-error.h: Fix description of gpg_err_code_to_errno + (i.e. substitute `ERR' with `CODE'). + * src/code-to-errno.c: Likewise. + + * tests/t-strerror.c: Include instead of + . + +2003-06-01 Marcus Brinkmann + + * src/strerror.c: Include . + + * src/gpg-error.h (gpg_err_code_t): Remove GPG_ERR_FILE_READ, + GPG_ERR_FILE_WRITE, GPG_ERR_FILE_OPEN, GPG_ERR_FILE_CREATE, + GPG_ERR_FILE_CLOSE, GPG_ERR_FILE_DELETE, GPG_ERR_FILE_EXISTS, + GPG_ERR_FILE, GPG_ERR_IO, GPG_ERR_OUT_OF_CORE, GPG_ERR_READ_ERROR, + GPG_ERR_WRITE_ERROR. + * src/err-codes.h.in: Likewise. + + * src/Makefile.am (EXTRA_DIST): Add err-sources.h and err-codes.h. + + * src/mkerrcodes1.awk: New file. + * src/mkerrcodes2.awk: New file. + * src/mkerrnos.awk: New file. + * src/errnos.in: New file. + * src/code-from-errno.c: New file. + * src/code-to-errno.c: New file. + * src/Makefile.am (libgpg_error_la_SOURCES): Remove err-sources.h + and err-codes.h. Add code-to-errno.c and code-from-errno.c. + (code-to-errno.h): New target. + (code-from-errno.h): Likewise. + (EXTRA_DIST): Add mkerrnos.awk, errnos.in, and mkerrcodes1.awk. + (BUILT_SOURCES): Add code-to-errno.h and code-from-errno.h. + (CLEANFILES): Likewise. + * src/strerror.c (gpg_strerror): Use strerror for system errors. + * src/err-codes.h.in: Add 16382 (Unknown system error). + * src/gpg-error.h (gpg_err_code_t): Add system errors. + (GPG_ERR_CODE_DIM): Change to 32768. + (GPG_ERR_SYSTEM_ERROR): New macro. + (gpg_err_code_from_errno): New prototype. + (gpg_err_code_to_errno): Likewise. + + * src/Makefile.am (nobase_include_HEADERS): Rename target to ... + (include_HEADERS): ... this. Change file to gpg-error.h + (libgpg_error_la_SOURCES): Change gpg/error.h to gpg-error.h. + * src/gpg/error.h: Move to ... + * src/gpg-error.h: ... here. New file. + * src/strerror.c: Include , not . + * src/strsource.c: Likewise. + + * src/gpg/error.h (gpg_error_t): Change type to unsigned int, not + long. + +2003-05-26 Marcus Brinkmann + + * src/gpg/error.h (gpg_make_error): Only OR in the error source if + there is an error, this allows to test for success with "if (!err)" + and similar tests. + +2003-05-15 Marcus Brinkmann + + * src/mkstrtable.awk: Add exception clause to license about the + output of the script. + * configure.ac: Change license to LGPL 2.1 or later. + * Makefile.am: Likewise. + * src/Makefile.am: Likewise. + * src/err-codes.h.in: Likewise. + * src/err-sources.h.in: Likewise. + * src/strsource.c: Likewise. + * src/strerror.c: Likewise. + * src/gpg/error.h: Likewise. + * tests/Makefile.am: Likewise. + + * src/mkstrtable.awk: New variable HEADER. Copy input until first + line with an actual code and description occurs. + * src/err-codes.h.in: Uncomment license, so it is copied into the + output. + * src/err-sources.h.in: Likewise. + +2003-05-15 Marcus Brinkmann + + * COPYING.LIB: New file. + +2003-05-15 Marcus Brinkmann + + * Initial check-in. + + Copyright 2003, 2004, 2005, 2006, 2007, 2010, 2011 g10 Code GmbH + + This file is free software; as a special exception the author gives + unlimited permission to copy and/or distribute it, with or without + modifications, as long as this notice is preserved. + + This file is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY, to the extent permitted by law; without even the + implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..23e5f25 --- /dev/null +++ b/INSTALL @@ -0,0 +1,236 @@ +Installation Instructions +************************* + +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free +Software Foundation, Inc. + +This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + +Basic Installation +================== + +These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. (Caching is +disabled by default to prevent problems with accidental use of stale +cache files.) + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You only need +`configure.ac' if you want to change it or regenerate `configure' using +a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + +Some systems require unusual options for compilation or linking that the +`configure' script does not know about. Run `./configure --help' for +details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + +You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not support the `VPATH' +variable, you have to compile the package for one architecture at a +time in the source code directory. After you have installed the +package for one architecture, use `make distclean' before reconfiguring +for another architecture. + +Installation Names +================== + +By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + +Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + +There may be some features `configure' cannot figure out automatically, +but needs to determine by the type of machine the package will run on. +Usually, assuming the package is built to be run on the _same_ +architectures, `configure' can figure that out, but if it prints a +message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + +If you want to set default values for `configure' scripts to share, you +can create a site shell script called `config.site' that gives default +values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + +Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). Here is a another example: + + /bin/bash ./configure CONFIG_SHELL=/bin/bash + +Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent +configuration-related scripts to be executed by `/bin/bash'. + +`configure' Invocation +====================== + +`configure' recognizes the following options to control how it operates. + +`--help' +`-h' + Print a summary of the options to `configure', and exit. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..b602c7f --- /dev/null +++ b/Makefile.am @@ -0,0 +1,163 @@ +# Makefile.am for libgpg-error. +# Copyright (C) 2003, 2006, 2007, 2013 g10 Code GmbH +# +# This file is part of libgpg-error. +# +# libgpg-error is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# libgpg-error is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this program; if not, see . + +# Location of the released tarball archives. Note that this is an +# internal archive and before uploading this to the public server, +# manual tests should be run and the git release tat set and pushed. +# Adjust as needed. +RELEASE_ARCHIVE_DIR = wk@vigenere:tarballs/libgpg-error/ + +# The key used to sign the released sources. Adjust as needed. +RELEASE_SIGNING_KEY = D8692123C4065DEA5E0F3AB5249B39D24F25E3B6 + +# Autoconf flags +ACLOCAL_AMFLAGS = -I m4 +DISTCHECK_CONFIGURE_FLAGS = --enable-doc + +# (A suitable gitlog-to-changelog script can be found in GnuPG master.) +GITLOG_TO_CHANGELOG=gitlog-to-changelog + +EXTRA_DIST = autogen.sh autogen.rc libgpg-error.spec.in \ + VERSION COPYING COPYING.LIB potomo doc/HACKING ChangeLog-2011 \ + po/ChangeLog-2011 m4/ChangeLog-2011 contrib/ChangeLog-2011 \ + build-aux/git-log-footer build-aux/git-log-fix + + +if LANGUAGES_SOME +lang_subdirs = lang +else +lang_subdirs = +endif + +#if BUILD_GPGSCM +#doc = gpgscm +#else +#doc = +#endif + +if BUILD_DOC +doc = doc +else +doc = +endif + +if BUILD_TESTS +tests = tests +else +tests = +endif + +SUBDIRS = m4 src $(doc) $(tests) po $(lang_subdirs) + + +dist-hook: gen-ChangeLog + sed -e 's/@pkg_version@/$(VERSION)/g' \ + $(top_srcdir)/libgpg-error.spec.in > $(distdir)/libgpg-error.spec + +distcheck-hook: + set -e; ( \ + pref="#+macro: $$(echo $(PACKAGE_NAME)|tr '-' '_')_" ;\ + reldate="$$(date -u +%Y-%m-%d)" ;\ + echo "$${pref}ver $(PACKAGE_VERSION)" ;\ + echo "$${pref}date $${reldate}" ;\ + list='$(DIST_ARCHIVES)'; for i in $$list; do \ + case "$$i" in *.tar.bz2) \ + echo "$${pref}size $$(wc -c <$$i|awk '{print int($$1/1024)}')k" ;\ + echo "$${pref}sha1 $$(sha1sum <$$i|cut -d' ' -f1)" ;\ + echo "$${pref}sha2 $$(sha256sum <$$i|cut -d' ' -f1)" ;;\ + esac;\ + done ) | tee $(distdir).swdb + + +gen_start_date = 2011-12-01T00:00:00 +.PHONY: gen-ChangeLog release sign-release +gen-ChangeLog: + set -e; \ + if test -d $(top_srcdir)/.git; then \ + (cd $(top_srcdir) && \ + $(GITLOG_TO_CHANGELOG) --append-dot --tear-off \ + --amend=build-aux/git-log-fix --tear-off \ + --since=$(gen_start_date) ) > $(distdir)/cl-t; \ + cat $(top_srcdir)/build-aux/git-log-footer >> $(distdir)/cl-t;\ + rm -f $(distdir)/ChangeLog; \ + mv $(distdir)/cl-t $(distdir)/ChangeLog; \ + fi + + +if HAVE_W32_SYSTEM +install-data-hook: + set -e; \ + for i in $$($(top_srcdir)/potomo --get-linguas $(top_srcdir)/po); do \ + $(MKDIR_P) "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES" || true; \ + rm -f "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES/libgpg-error.mo" \ + 2>/dev/null || true; \ + $(top_srcdir)/potomo $(top_srcdir)/po/$$i.po \ + "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES/libgpg-error.mo" ; \ + done +endif + +stowinstall: + $(MAKE) $(AM_MAKEFLAGS) install prefix=/usr/local/stow/libgpg-error + + +# Macro to help the release target. +RELEASE_NAME = $(PACKAGE_TARNAME)-$(PACKAGE_VERSION) + +release: + +(set -e;\ + if [ "$(abs_top_builddir)" = "$(abs_top_srcdir)" ]; then \ + echo "error: build directory must not be the source directory" >&2;\ + exit 2;\ + fi ;\ + echo "/* Build started at $$(date -uIseconds) */" ;\ + cd $(top_srcdir); \ + ./autogen.sh --force; \ + cd $(abs_top_builddir); \ + rm -rf dist; mkdir dist ; cd dist ; \ + $(abs_top_srcdir)/configure --enable-maintainer-mode; \ + $(MAKE) distcheck; \ + echo "/* Build finished at $$(date -uIseconds) */" ;\ + echo "/*" ;\ + echo " * Please run the final step interactivly:" ;\ + echo " * make sign-release" ;\ + echo " */" ;\ + ) 2>&1 | tee "$(RELEASE_NAME).buildlog" + +sign-release: + +(set -e; \ + cd dist; \ + files1="$(RELEASE_NAME).tar.bz2 \ + $(RELEASE_NAME).tar.gz" ; \ + files2="$(RELEASE_NAME).tar.bz2.sig \ + $(RELEASE_NAME).tar.gz.sig \ + $(RELEASE_NAME).swdb \ + $(RELEASE_NAME).buildlog" ;\ + echo "/* Signing the source tarball ..." ;\ + gpg -sbu $(RELEASE_SIGNING_KEY) $(RELEASE_NAME).tar.bz2 ;\ + gpg -sbu $(RELEASE_SIGNING_KEY) $(RELEASE_NAME).tar.gz ;\ + cat $(RELEASE_NAME).swdb >swdb.snippet;\ + echo >>swdb.snippet ;\ + sha1sum $${files1} >>swdb.snippet ;\ + cat "../$(RELEASE_NAME).buildlog" swdb.snippet \ + | gzip >$(RELEASE_NAME).buildlog ;\ + echo "Copying to local archive ..." ;\ + scp -p $${files1} $${files2} $(RELEASE_ARCHIVE_DIR)/ || true;\ + echo '/*' ;\ + echo ' * All done; for checksums see dist/swdb.snippet' ;\ + echo ' */' ;\ + ) diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..817e668 --- /dev/null +++ b/Makefile.in @@ -0,0 +1,1005 @@ +# Makefile.in generated by automake 1.14.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2013 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Makefile.am for libgpg-error. +# Copyright (C) 2003, 2006, 2007, 2013 g10 Code GmbH +# +# This file is part of libgpg-error. +# +# libgpg-error is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# libgpg-error is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this program; if not, see . +VPATH = @srcdir@ +am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = . +DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \ + $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(top_srcdir)/configure $(am__configure_deps) \ + $(srcdir)/config.h.in ABOUT-NLS COPYING COPYING.LIB THANKS \ + build-aux/compile build-aux/config.guess \ + build-aux/config.rpath build-aux/config.sub build-aux/depcomp \ + build-aux/install-sh build-aux/mdate-sh build-aux/missing \ + mkinstalldirs build-aux/texinfo.tex build-aux/ltmain.sh \ + $(top_srcdir)/build-aux/compile \ + $(top_srcdir)/build-aux/config.guess \ + $(top_srcdir)/build-aux/config.rpath \ + $(top_srcdir)/build-aux/config.sub \ + $(top_srcdir)/build-aux/install-sh \ + $(top_srcdir)/build-aux/ltmain.sh \ + $(top_srcdir)/build-aux/missing +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \ + $(top_srcdir)/m4/estream.m4 $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/gnupg-misc.m4 $(top_srcdir)/m4/iconv.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/lock.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ + $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ + $(top_srcdir)/m4/readline.m4 $(top_srcdir)/m4/threadlib.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + cscope distdir dist dist-all distcheck +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ + $(LISP)config.h.in +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +DIST_SUBDIRS = m4 src doc tests po lang +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 +GZIP_ENV = --best +DIST_TARGETS = dist-bzip2 dist-gzip +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BUILD_FILEVERSION = @BUILD_FILEVERSION@ +BUILD_REVISION = @BUILD_REVISION@ +BUILD_TIMESTAMP = @BUILD_TIMESTAMP@ +BUILD_VERSION = @BUILD_VERSION@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CC_FOR_BUILD = @CC_FOR_BUILD@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GPG_ERROR_CONFIG_CFLAGS = @GPG_ERROR_CONFIG_CFLAGS@ +GPG_ERROR_CONFIG_HOST = @GPG_ERROR_CONFIG_HOST@ +GPG_ERROR_CONFIG_ISUBDIRAFTER = @GPG_ERROR_CONFIG_ISUBDIRAFTER@ +GPG_ERROR_CONFIG_LIBS = @GPG_ERROR_CONFIG_LIBS@ +GPG_ERROR_CONFIG_MT_CFLAGS = @GPG_ERROR_CONFIG_MT_CFLAGS@ +GPG_ERROR_CONFIG_MT_LIBS = @GPG_ERROR_CONFIG_MT_LIBS@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBGPG_ERROR_LT_AGE = @LIBGPG_ERROR_LT_AGE@ +LIBGPG_ERROR_LT_CURRENT = @LIBGPG_ERROR_LT_CURRENT@ +LIBGPG_ERROR_LT_REVISION = @LIBGPG_ERROR_LT_REVISION@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBMULTITHREAD = @LIBMULTITHREAD@ +LIBOBJS = @LIBOBJS@ +LIBREADLINE = @LIBREADLINE@ +LIBS = @LIBS@ +LIBTHREAD = @LIBTHREAD@ +LIBTOOL = @LIBTOOL@ +LIB_NETWORK = @LIB_NETWORK@ +LIB_SCHED_YIELD = @LIB_SCHED_YIELD@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBMULTITHREAD = @LTLIBMULTITHREAD@ +LTLIBOBJS = @LTLIBOBJS@ +LTLIBTHREAD = @LTLIBTHREAD@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +RC = @RC@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +VERSION_NUMBER = @VERSION_NUMBER@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +YAT2M = @YAT2M@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ + +# Location of the released tarball archives. Note that this is an +# internal archive and before uploading this to the public server, +# manual tests should be run and the git release tat set and pushed. +# Adjust as needed. +RELEASE_ARCHIVE_DIR = wk@vigenere:tarballs/libgpg-error/ + +# The key used to sign the released sources. Adjust as needed. +RELEASE_SIGNING_KEY = D8692123C4065DEA5E0F3AB5249B39D24F25E3B6 + +# Autoconf flags +ACLOCAL_AMFLAGS = -I m4 +DISTCHECK_CONFIGURE_FLAGS = --enable-doc + +# (A suitable gitlog-to-changelog script can be found in GnuPG master.) +GITLOG_TO_CHANGELOG = gitlog-to-changelog +EXTRA_DIST = autogen.sh autogen.rc libgpg-error.spec.in \ + VERSION COPYING COPYING.LIB potomo doc/HACKING ChangeLog-2011 \ + po/ChangeLog-2011 m4/ChangeLog-2011 contrib/ChangeLog-2011 \ + build-aux/git-log-footer build-aux/git-log-fix + +@LANGUAGES_SOME_FALSE@lang_subdirs = +@LANGUAGES_SOME_TRUE@lang_subdirs = lang +@BUILD_DOC_FALSE@doc = + +#if BUILD_GPGSCM +#doc = gpgscm +#else +#doc = +#endif +@BUILD_DOC_TRUE@doc = doc +@BUILD_TESTS_FALSE@tests = +@BUILD_TESTS_TRUE@tests = tests +SUBDIRS = m4 src $(doc) $(tests) po $(lang_subdirs) +gen_start_date = 2011-12-01T00:00:00 + +# Macro to help the release target. +RELEASE_NAME = $(PACKAGE_TARNAME)-$(PACKAGE_VERSION) +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +config.h: stamp-h1 + @test -f $@ || rm -f stamp-h1 + @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-hook + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__post_remove_distdir) +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) + +dist-tarZ: distdir + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__post_remove_distdir) + +dist-shar: distdir + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__post_remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__post_remove_distdir) + +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + --srcdir=.. --prefix="$$dc_install_base" \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile config.h +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +@HAVE_W32_SYSTEM_FALSE@install-data-hook: +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr \ + distclean-libtool distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-data-hook +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(am__recursive_targets) all install-am install-data-am \ + install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ + am--refresh check check-am clean clean-cscope clean-generic \ + clean-libtool cscope cscopelist-am ctags ctags-am dist \ + dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ + dist-tarZ dist-xz dist-zip distcheck distclean \ + distclean-generic distclean-hdr distclean-libtool \ + distclean-tags distcleancheck distdir distuninstallcheck dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-data-hook install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-am uninstall uninstall-am + + +dist-hook: gen-ChangeLog + sed -e 's/@pkg_version@/$(VERSION)/g' \ + $(top_srcdir)/libgpg-error.spec.in > $(distdir)/libgpg-error.spec + +distcheck-hook: + set -e; ( \ + pref="#+macro: $$(echo $(PACKAGE_NAME)|tr '-' '_')_" ;\ + reldate="$$(date -u +%Y-%m-%d)" ;\ + echo "$${pref}ver $(PACKAGE_VERSION)" ;\ + echo "$${pref}date $${reldate}" ;\ + list='$(DIST_ARCHIVES)'; for i in $$list; do \ + case "$$i" in *.tar.bz2) \ + echo "$${pref}size $$(wc -c <$$i|awk '{print int($$1/1024)}')k" ;\ + echo "$${pref}sha1 $$(sha1sum <$$i|cut -d' ' -f1)" ;\ + echo "$${pref}sha2 $$(sha256sum <$$i|cut -d' ' -f1)" ;;\ + esac;\ + done ) | tee $(distdir).swdb +.PHONY: gen-ChangeLog release sign-release +gen-ChangeLog: + set -e; \ + if test -d $(top_srcdir)/.git; then \ + (cd $(top_srcdir) && \ + $(GITLOG_TO_CHANGELOG) --append-dot --tear-off \ + --amend=build-aux/git-log-fix --tear-off \ + --since=$(gen_start_date) ) > $(distdir)/cl-t; \ + cat $(top_srcdir)/build-aux/git-log-footer >> $(distdir)/cl-t;\ + rm -f $(distdir)/ChangeLog; \ + mv $(distdir)/cl-t $(distdir)/ChangeLog; \ + fi + +@HAVE_W32_SYSTEM_TRUE@install-data-hook: +@HAVE_W32_SYSTEM_TRUE@ set -e; \ +@HAVE_W32_SYSTEM_TRUE@ for i in $$($(top_srcdir)/potomo --get-linguas $(top_srcdir)/po); do \ +@HAVE_W32_SYSTEM_TRUE@ $(MKDIR_P) "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES" || true; \ +@HAVE_W32_SYSTEM_TRUE@ rm -f "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES/libgpg-error.mo" \ +@HAVE_W32_SYSTEM_TRUE@ 2>/dev/null || true; \ +@HAVE_W32_SYSTEM_TRUE@ $(top_srcdir)/potomo $(top_srcdir)/po/$$i.po \ +@HAVE_W32_SYSTEM_TRUE@ "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES/libgpg-error.mo" ; \ +@HAVE_W32_SYSTEM_TRUE@ done + +stowinstall: + $(MAKE) $(AM_MAKEFLAGS) install prefix=/usr/local/stow/libgpg-error + +release: + +(set -e;\ + if [ "$(abs_top_builddir)" = "$(abs_top_srcdir)" ]; then \ + echo "error: build directory must not be the source directory" >&2;\ + exit 2;\ + fi ;\ + echo "/* Build started at $$(date -uIseconds) */" ;\ + cd $(top_srcdir); \ + ./autogen.sh --force; \ + cd $(abs_top_builddir); \ + rm -rf dist; mkdir dist ; cd dist ; \ + $(abs_top_srcdir)/configure --enable-maintainer-mode; \ + $(MAKE) distcheck; \ + echo "/* Build finished at $$(date -uIseconds) */" ;\ + echo "/*" ;\ + echo " * Please run the final step interactivly:" ;\ + echo " * make sign-release" ;\ + echo " */" ;\ + ) 2>&1 | tee "$(RELEASE_NAME).buildlog" + +sign-release: + +(set -e; \ + cd dist; \ + files1="$(RELEASE_NAME).tar.bz2 \ + $(RELEASE_NAME).tar.gz" ; \ + files2="$(RELEASE_NAME).tar.bz2.sig \ + $(RELEASE_NAME).tar.gz.sig \ + $(RELEASE_NAME).swdb \ + $(RELEASE_NAME).buildlog" ;\ + echo "/* Signing the source tarball ..." ;\ + gpg -sbu $(RELEASE_SIGNING_KEY) $(RELEASE_NAME).tar.bz2 ;\ + gpg -sbu $(RELEASE_SIGNING_KEY) $(RELEASE_NAME).tar.gz ;\ + cat $(RELEASE_NAME).swdb >swdb.snippet;\ + echo >>swdb.snippet ;\ + sha1sum $${files1} >>swdb.snippet ;\ + cat "../$(RELEASE_NAME).buildlog" swdb.snippet \ + | gzip >$(RELEASE_NAME).buildlog ;\ + echo "Copying to local archive ..." ;\ + scp -p $${files1} $${files2} $(RELEASE_ARCHIVE_DIR)/ || true;\ + echo '/*' ;\ + echo ' * All done; for checksums see dist/swdb.snippet' ;\ + echo ' */' ;\ + ) + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/NEWS b/NEWS new file mode 100644 index 0000000..d1f112e --- /dev/null +++ b/NEWS @@ -0,0 +1,859 @@ +Noteworthy changes in version 1.31 (2018-05-02) [C24/A24/R2] +----------------------------------------------- + + * Fixes another problem with gpgrt_poll under Windows. [#3937] + + * New translation for Spanish. + + +Noteworthy changes in version 1.30 (2018-04-30) [C24/A24/R1] +----------------------------------------------- + + * Fixes a hang on Windows when using gpgrt_poll under nPth. + + * Build fix for Solaris. [#3869] + + +Noteworthy changes in version 1.29 (2018-04-11) [C24/A24/R0] +----------------------------------------------- + + * The yat2m tool is during cross-compile now also installed on the + host platform. + + * New option parser and associated functions similar to the one used + by GnuPG. + + * New Base-64 encoder. + + * Fixes regression in 1.28 for arm64 and w64 builds. + + * Interface changes relative to the 1.28 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + gpgrt_argparse New. + gpgrt_usage New. + gpgrt_strusage New. + gpgrt_set_strusage New. + gpgrt_set_usage_outfnc New. + gpgrt_set_fixed_string_mapper New. + GPGRT_ENABLE_ARGPARSE_MACROS New macro. + gpgrt_b64enc_start New. + gpgrt_b64enc_write New. + gpgrt_b64enc_finish New. + + +Noteworthy changes in version 1.28 (2018-03-13) [C23/A23/R0] +----------------------------------------------- + + * The formerly internal yat2m tool is now installed for a native + build. + + * The new files gpgrt.m4 and gpgrt-config are now installed. They + can be used instead of gpg-error.m4 and gpg-error-config. + + * New logging functions similar to those used by GnuPG. + + * New helper functions for platform abstraction. + + * Interface changes relative to the 1.27 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + gpgrt_get_errorcount New API. + gpgrt_inc_errorcount New API. + gpgrt_log_set_sink New API. + gpgrt_log_set_socket_dir_cb New API. + gpgrt_log_set_pid_suffix_cb New API. + gpgrt_log_set_prefix New API. + gpgrt_log_get_prefix New API. + gpgrt_log_test_fd New API. + gpgrt_log_get_fd New API. + gpgrt_log_get_stream New API. + gpgrt_log New API. + gpgrt_logv New API. + gpgrt_logv_prefix New API. + gpgrt_log_string New API. + gpgrt_log_info New API. + gpgrt_log_error New API. + gpgrt_log_fatal New API. + gpgrt_log_bug New API. + gpgrt_log_debug New API. + gpgrt_log_debug_string New API. + gpgrt_log_printf New API. + gpgrt_log_flush New API. + gpgrt_log_printhex New API. + gpgrt_log_clock New API. + gpgrt_assert New macro. + _gpgrt_log_assert New internal API. + GPGRT_LOGLVL_BEGIN New const. + GPGRT_LOGLVL_CONT New const. + GPGRT_LOGLVL_INFO New const. + GPGRT_LOGLVL_WARN New const. + GPGRT_LOGLVL_ERROR New const. + GPGRT_LOGLVL_FATAL New const. + GPGRT_LOGLVL_BUG New const. + GPGRT_LOGLVL_DEBUG New const. + gpgrt_realloc New API. + gpgrt_malloc New API. + gpgrt_calloc New API. + gpgrt_strdup New API. + gpgrt_strconcat New API. + gpgrt_w32_reg_query_string New API. + gpgrt_getenv New API. + gpgrt_setenv New API. + gpgrt_mkdir New API. + gpgrt_chdir New API. + gpgrt_getcwd New API. + + +Noteworthy changes in version 1.27 (2017-02-28) [C22/A22/R0] +----------------------------------------------- + + * Added a Base64 decoder. + + * Added support for the sh3 architecture. + + * Added header gpgrt.h as an alias for gpg-error.h. + + * Fixed macro GPGRT_GCC_VERSION. + + * Fixed a race in non-blocking I/O on Windows. + + * Interface changes relative to the 1.26 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + gpgrt_b64state_t NEW type. + gpgrt_b64dec_start NEW. + gpgrt_b64dec_proc NEW. + gpgrt_b64dec_finish NEW. + GPG_ERR_WRONG_NAME NEW. + gpgrt.h NEW header. + + +Noteworthy changes in version 1.26 (2016-12-21) [C21/A21/R0] +----------------------------------------------- + + * New option --desc for gpg-error. + + * Interface changes relative to the 1.25 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_UNKNOWN_FLAG NEW. + GPG_ERR_INV_ORDER NEW. + GPG_ERR_ALREADY_FETCHED NEW. + GPG_ERR_TRY_LATER NEW. + GPG_ERR_SYSTEM_BUG NEW. + GPG_ERR_DNS_UNKNOWN NEW. + GPG_ERR_DNS_SECTION NEW. + GPG_ERR_DNS_ADDRESS NEW. + GPG_ERR_DNS_NO_QUERY NEW. + GPG_ERR_DNS_NO_ANSWER NEW. + GPG_ERR_DNS_CLOSED NEW. + GPG_ERR_DNS_VERIFY NEW. + GPG_ERR_DNS_TIMEOUT NEW. + + +Noteworthy changes in version 1.25 (2016-11-14) [C20/A20/R0] +----------------------------------------------- + + * New interface gpgrt_get_syscall_clamp to allow libaries to make use + of Libgpg-error's system call wrapper functions. + + * gpgrt_poll does now work under Windows. + + * Fixed bug in the locking code when used with the nPth threading + library. + + * Added support for {i686,x86_64}-apple-darwin. + + * Added new error codes. + + * Interface changes relative to the 1.23 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + gpgrt_get_syscall_clamp NEW. + GPG_ERR_ENGINE_TOO_OLD NEW. + GPG_ERR_WINDOW_TOO_SMALL NEW. + GPG_ERR_WINDOW_TOO_LARGE NEW. + GPG_ERR_MISSING_ENVVAR NEW. + GPG_ERR_USER_ID_EXISTS NEW. + GPG_ERR_NAME_EXISTS NEW. + GPG_ERR_DUP_NAME NEW. + GPG_ERR_TOO_OLD NEW. + GPG_ERR_TOO_YOUNG NEW. + + +Noteworthy changes in version 1.24 (2016-07-14) [C19/A19/R1] +----------------------------------------------- + + * Fixes a bug in es_fclose_snatch when used used after es_fseek. + + * Fixes building without thread support. + + * New configure option --disable-tests. + + +Noteworthy changes in version 1.23 (2016-06-15) [C19/A19/R0] +----------------------------------------------- + + * Fixes an assertion failure due to es_flush on read/write streams. + + * Fixes a bug with a too short memory limit is es_fopenmen. + + * Cross-build support for powerpc-unknown-linux-gnuspe and + tilegx-unknown-linux-gnu architectures. + + * Interface changes relative to the 1.22 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_SUBKEYS_EXP_OR_REV NEW. + + +Noteworthy changes in version 1.22 (2016-04-25) [C18/A18/R0] +----------------------------------------------- + + * New functions and macros to to provide iconv(3) on Windows. + + * Support for LeakSanitizer with the gpgrt_annotate_leaked_object + inline function. + + * Interface changes relative to the 1.21 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_DB_CORRUPTED NEW. + gpgrt_annotate_leaked_object NEW inline func. + GPGRT_ENABLE_W32_ICONV_MACROS NEW. + gpgrt_w32_iconv_open NEW. + gpgrt_w32_iconv_close NEW. + gpgrt_w32_iconv NEW. + + +Noteworthy changes in version 1.21 (2015-12-12) [C17/A17/R0] +----------------------------------------------- + + * New functions gpgrt_poll and gpgrt_set_nonblock. For now only + pipes and sockets on Unix are supported. + + * Fixes gettext output encoding problems on Windows. + + * Interface changes relative to the 1.20 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + gpgrt_set_nonblock NEW. + gpgrt_get_nonblock NEW. + gpgrt_poll NEW. + gpgrt_poll_t NEW type. + es_poll_t NEW type. + es_set_nonblock NEW macro. + es_get_nonblock NEW macro. + es_poll NEW macro. + GPG_ERR_TRUE NEW. + GPG_ERR_FALSE NEW. + GPG_ERR_NO_NAME NEW. + GPG_ERR_NO_KEY NEW. + GPG_ERR_SERVER_FAILED NEW. + + +Noteworthy changes in version 1.20 (2015-08-26) [C16/A16/R0] +----------------------------------------------- + + * New macros for GCC attributes. + + * Make es_set_binary actually work for Windows. + + * Allow building without thread support. + + * Build without a build timestamp by default. + + * Interface changes relative to the 1.19 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPGRT_VERSION NEW macro. + GPGRT_VERSION_NUMBER NEW macro. + GPGRT_INLINE NEW macro. + GPGRT_GCC_VERSION NEW macro. + GPGRT_ATTR_NORETURN NEW macro. + GPGRT_ATTR_PRINTF NEW macro. + GPGRT_ATTR_NR_PRINTF NEW macro. + GPGRT_ATTR_FORMAT_ARG NEW macro. + GPGRT_ATTR_SENTINEL NEW macro. + GPGRT_ATTR_USED NEW macro. + GPGRT_ATTR_UNUSED NEW macro. + GPGRT_ATTR_DEPRECATED NEW macro. + GPGRT_ATTR_PURE NEW macro. + GPGRT_ATTR_MALLOC NEW macro. + GPGRT_HAVE_MACRO_FUNCTION NEW macro. + GPGRT_HAVE_PRAGMA_GCC_PUSH NEW macro. + + +Noteworthy changes in version 1.19 (2015-04-10) [C15/A15/R0] +----------------------------------------------- + + * New set of error codes for use with LDAP. + + * New options --help and --defines for gpg-error. + + * Allow building with gcc 5. + + * Interface changes relative to the 1.18 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_LDAP_* NEW. + + +Noteworthy changes in version 1.18 (2015-01-26) [C14/A14/R0] +----------------------------------------------- + + * New translations for Hungarian, Portuguese, Russian, and + traditional Chinese. Updated other translations. + + * New error codes. + + * Interface changes relative to the 1.17 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_FORBIDDEN NEW. + GPG_ERR_OBJ_TERM_STATE NEW. + GPG_ERR_REQUEST_TOO_SHORT NEW. + GPG_ERR_REQUEST_TOO_LONG NEW. + GPG_ERR_LEGACY_KEY NEW. + + +Noteworthy changes in version 1.17 (2014-10-15) [C13/A13/R0] +----------------------------------------------- + + * New error codes for TLS protocol libraries. + + * New configure option --enable-build-timestamp. + + * New man page for gpg-error-config. + + * Interface changes relative to the 1.16 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_SOURCE_TLS NEW. + GPG_ERR_NO_CERT_CHAIN NEW. + GPG_ERR_CERT_TOO_LARGE NEW. + GPG_ERR_INV_RECORD NEW. + GPG_ERR_BAD_MAC NEW. + GPG_ERR_UNEXPECTED_MSG NEW. + GPG_ERR_COMPR_FAILED NEW. + GPG_ERR_WOULD_WRAP NEW. + GPG_ERR_FATAL_ALERT NEW. + GPG_ERR_NO_CIPHER NEW. + GPG_ERR_MISSING_CLIENT_CERT NEW. + GPG_ERR_CLOSE_NOTIFY NEW. + GPG_ERR_TICKET_EXPIRED NEW. + GPG_ERR_BAD_TICKET NEW. + GPG_ERR_UNKNOWN_IDENTITY NEW. + GPG_ERR_BAD_HS_CERT NEW. + GPG_ERR_BAD_HS_CERT_REQ NEW. + GPG_ERR_BAD_HS_CERT_VER NEW. + GPG_ERR_BAD_HS_CHANGE_CIPHER NEW. + GPG_ERR_BAD_HS_CLIENT_HELLO NEW. + GPG_ERR_BAD_HS_SERVER_HELLO NEW. + GPG_ERR_BAD_HS_SERVER_HELLO_DONE NEW. + GPG_ERR_BAD_HS_FINISHED NEW. + GPG_ERR_BAD_HS_SERVER_KEX NEW. + GPG_ERR_BAD_HS_CLIENT_KEX NEW. + GPG_ERR_BOGUS_STRING NEW. + gpgrt_pending NEW. + gpgrt_pending_unlocked NEW. + + +Noteworthy changes in version 1.16 (2014-09-18) [C12/A12/R2] +----------------------------------------------- + + * Support building for iOS. + + * Fixed a prototype mismatch. + + * Fix es_fclose for streams opened with "samethread". + + +Noteworthy changes in version 1.15 (2014-09-11) [C12/A12/R1] +----------------------------------------------- + + * This releases fixes problems with the use of off_t and ssize_t by + the estream functions introduced with 1.14. Although this is + technically an ABI break on some platforms, we take this as a + simple bug fix for 1.14. The new functions are very unlikely in + use by any code and thus no breakage should happen. The 1.14 + tarball will be removed from the archive. + + * Add type gpgrt_off_t which is guaranteed to be 64 bit. + + * Add type gpgrt_ssize_t to make use on Windows easier. On Unix + platforms this is an alias for ssize_t. + + +Noteworthy changes in version 1.14 (2014-09-08) [C12/A12/R0] +----------------------------------------------- + + * Added gpgrt_lock_trylock. + + * Added the estream library under the name gpgrt and a set of macros + to use them with their "es_" names. + + * Interface changes relative to the 1.13 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_KEY_DISABLED NEW. + gpgrt_init NEW macro. + gpgrt_check_version NEW. + gpgrt_lock_trylock NEW. + gpgrt_set_syscall_clamp NEW. + gpgrt_set_alloc_func NEW. + gpgrt_stream_t NEW. + gpgrt_cookie_io_functions_t NEW. + gpgrt_syshd_t NEW. + GPGRT_SYSHD_NONE NEW. + GPGRT_SYSHD_FD NEW. + GPGRT_SYSHD_SOCK NEW. + GPGRT_SYSHD_RVID NEW. + GPGRT_SYSHD_HANDLE NEW. + gpgrt_stdin NEW macro. + gpgrt_stdout NEW macro. + gpgrt_stderr NEW macro. + gpgrt_fopen NEW. + gpgrt_mopen NEW. + gpgrt_fopenmem NEW. + gpgrt_fopenmem_init NEW. + gpgrt_fdopen NEW. + gpgrt_fdopen_nc NEW. + gpgrt_sysopen NEW. + gpgrt_sysopen_nc NEW. + gpgrt_fpopen NEW. + gpgrt_fpopen_nc NEW. + gpgrt_freopen NEW. + gpgrt_fopencookie NEW. + gpgrt_fclose NEW. + gpgrt_fclose_snatch NEW. + gpgrt_onclose NEW. + gpgrt_fileno NEW. + gpgrt_fileno_unlocked NEW. + gpgrt_syshd NEW. + gpgrt_syshd_unlocked NEW. + gpgrt_flockfile NEW. + gpgrt_ftrylockfile NEW. + gpgrt_funlockfile NEW. + gpgrt_feof NEW. + gpgrt_feof_unlocked NEW. + gpgrt_ferror NEW. + gpgrt_ferror_unlocked NEW. + gpgrt_clearerr NEW. + gpgrt_clearerr_unlocked NEW. + gpgrt_fflush NEW. + gpgrt_fseek NEW. + gpgrt_fseeko NEW. + gpgrt_ftell NEW. + gpgrt_ftello NEW. + gpgrt_rewind NEW. + gpgrt_getc NEW macro. + gpgrt_getc_unlocked NEW macro. + gpgrt_fgetc NEW. + gpgrt_fputc NEW. + gpgrt_ungetc NEW. + gpgrt_read NEW. + gpgrt_write NEW. + gpgrt_write_sanitized NEW. + gpgrt_write_hexstring NEW. + gpgrt_fread NEW. + gpgrt_fwrite NEW. + gpgrt_fgets NEW. + gpgrt_putc NEW macro. + gpgrt_putc_unlocked NEW macro. + gpgrt_fputs NEW. + gpgrt_fputs_unlocked NEW. + gpgrt_getline NEW. + gpgrt_read_line NEW. + gpgrt_free NEW. + gpgrt_fprintf NEW. + gpgrt_fprintf_unlocked NEW. + gpgrt_printf NEW. + gpgrt_printf_unlocked NEW. + gpgrt_vfprintf NEW. + gpgrt_vfprintf_unlocked NEW. + gpgrt_setvbuf NEW. + gpgrt_setbuf NEW. + gpgrt_set_binary NEW. + gpgrt_tmpfile NEW. + gpgrt_opaque_set NEW. + gpgrt_opaque_get NEW. + gpgrt_fname_set NEW. + gpgrt_fname_get NEW. + gpgrt_asprintf NEW. + gpgrt_vasprintf NEW. + gpgrt_bsprintf NEW. + gpgrt_vbsprintf NEW. + gpgrt_snprintf NEW. + gpgrt_vsnprintf NEW. + + +Noteworthy changes in version 1.13 (2014-04-15) [C11/A11/R0] +----------------------------------------------- + + * Added a portable mutex API. + + * The AM_PATH_GPG_ERROR macro now defines GPG_ERROR_MT_CFLAGS and + GPG_ERROR_MT_LIBS autoconf output variables for use by programs + which need gpgrt based thread support. gpg-error-config has a new + option --mt. + + * Interface changes relative to the 1.12 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_KEY_ON_CARD NEW. + GPG_ERR_MAC_ALGO NEW. + GPG_ERR_INV_LOCK_OBJ NEW. + gpgrt_lock_t NEW. + GPGRT_LOCK_INITIALIZER NEW. + GPGRT_LOCK_DEFINE NEW. + gpgrt_lock_init NEW. + gpgrt_lock_lock NEW. + gpgrt_lock_unlock NEW. + gpgrt_lock_destroy NEW. + gpgrt_yield NEW. + + +Noteworthy changes in version 1.12 (2013-06-24) +----------------------------------------------- + + * Add support for 64 bit Windows (use ./autogen.sh --build-w64). + + * Fixed parsing and installing of the Windows .def file. + + * Interface changes relative to the 1.11 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_NO_CRYPT_CTX NEW. + GPG_ERR_WRONG_CRYPT_CTX NEW. + GPG_ERR_BAD_CRYPT_CTX NEW. + GPG_ERR_CRYPT_CTX_CONFLICT NEW. + GPG_ERR_BROKEN_PUBKEY NEW. + GPG_ERR_BROKEN_SECKEY NEW. + + +Noteworthy changes in version 1.11 (2013-02-25) +----------------------------------------------- + + * New error source GPG_ERR_SOURCE_ASSUAN for Libassuan related + errors. + + * New macros GPG_ERROR_VERSION and GPG_ERROR_VERSION_NUMBER. New + function gpg_error_check_version. + + * Interface changes relative to the 1.10 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_NO_KEYSERVER NEW. + GPG_ERR_INV_CURVE NEW. + GPG_ERR_UNKNOWN_CURVE NEW. + GPG_ERR_DUP_KEY NEW. + GPG_ERR_AMBIGUOUS NEW. + GPG_ERR_SOURCE_ASSUAN NEW. + gpg_error_check_version NEW. + GPG_ERROR_VERSION NEW. + GPG_ERROR_VERSION_NUMBER NEW. + + +Noteworthy changes in version 1.10 (2010-10-26) +----------------------------------------------- + + * Using a static library on W32 does now work. + + * Interface changes relative to the 1.9 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_NOT_INITIALIZED NEW. + GPG_ERR_MISSING_ISSUER_CERT NEW. + GPG_ERR_FULLY_CANCELED NEW. + + +Noteworthy changes in version 1.9 (2010-07-21) +---------------------------------------------- + + * New function gpg_err_deinit. + + * Fix building of static lib under W32. + + * Interface changes relative to the 1.8 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_MISSING_KEY NEW. + GPG_ERR_TOO_MANY NEW. + GPG_ERR_LIMIT_REACHED NEW. + gpg_err_deinit NEW. + + +Noteworthy changes in version 1.8 (2010-05-06) +---------------------------------------------- + + * Support for WindowsCE. + + * New option --list for gpg-error. + + * Interface changes relative to the 1.7 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_NOT_ENABLED NEW. + GPG_ERR_SOURCE_G13 NEW. + GPG_ERR_NO_ENGINE NEW. + gpg_err_set_errno NEW. + + +Noteworthy changes in version 1.7 (2008-11-26) +---------------------------------------------- + + * Minor fixes and a few new error codes. + + * Interface changes relative to the 1.6 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_NOT_OPERATIONAL NEW + GPG_ERR_NO_PASSPHRASE NEW + GPG_ERR_NO_PIN NEW + + +Noteworthy changes in version 1.6 (2007-10-29) +---------------------------------------------- + + * Fixed a build problem under Windows. + + * Interface changes relative to the 1.4 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + GPG_ERR_UNFINISHED NEW + GPG_ERR_SOURCE_GPA NEW + GPG_ERR_SOURCE_KLEO NEW + + +Noteworthy changes in version 1.5 (2006-11-30) +---------------------------------------------- + + * Minor build system fixes. + + * Updated gettext. Removed included gettext copy. + + * gpg-error has a new option --version. + + +Noteworthy changes in version 1.4 (2006-09-14) +---------------------------------------------- + + * Support for Common Lisp is included. + + * New error codes for the Assuan IPC library. + + * New error code GPG_ERR_MISSING_ERRNO to be used in cases when a + system accidentally does not set errno but a system error + definitely occurred. + + * New error source GPG_ERR_SOURCE_ANY to allow proper use of + libgpg-error even if a specific source is not available. + + * New convenience functions gpg_err_code_from_syserror and + gpg_error_from_syserror which make sure never to return 0. + + * Interface changes relative to the 1.2 release: + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + gpg_err_code_from_syserror NEW + gpg_error_from_syserror NEW + GPG_ERR_SOURCE_ANY NEW + GPG_ERR_MISSING_ERRNO NEW + GPG_ERR_UNKNOWN_OPTION NEW + GPG_ERR_UNKNOWN_COMMAND NEW + GPG_ERR_ASS_GENERAL NEW + GPG_ERR_ASS_ACCEPT_FAILED NEW + GPG_ERR_ASS_CONNECT_FAILED NEW + GPG_ERR_ASS_INV_RESPONSE NEW + GPG_ERR_ASS_INV_VALUE NEW + GPG_ERR_ASS_INCOMPLETE_LINE NEW + GPG_ERR_ASS_LINE_TOO_LONG NEW + GPG_ERR_ASS_NESTED_COMMANDS NEW + GPG_ERR_ASS_NO_DATA_CB NEW + GPG_ERR_ASS_NO_INQUIRE_CB NEW + GPG_ERR_ASS_NOT_A_SERVER NEW + GPG_ERR_ASS_NOT_A_CLIENT NEW + GPG_ERR_ASS_SERVER_START NEW + GPG_ERR_ASS_READ_ERROR NEW + GPG_ERR_ASS_WRITE_ERROR NEW + GPG_ERR_ASS_TOO_MUCH_DATA NEW + GPG_ERR_ASS_UNEXPECTED_CMD NEW + GPG_ERR_ASS_UNKNOWN_CMD NEW + GPG_ERR_ASS_SYNTAX NEW + GPG_ERR_ASS_CANCELED NEW + GPG_ERR_ASS_NO_INPUT NEW + GPG_ERR_ASS_NO_OUTPUT NEW + GPG_ERR_ASS_PARAMETER NEW + GPG_ERR_ASS_UNKNOWN_INQUIRE NEW + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + +Noteworthy changes in version 1.3 (2006-03-14) +---------------------------------------------- + + * GNU gettext is included for systems that do not provide it. + + +Noteworthy changes in version 1.2 (2006-03-03) +---------------------------------------------- + + * New function gpg_err_init, which binds the locale directory to + the text domain. This function is a constructor on GCC targets, + so it does not need to be called explicitely. The header file + defines GPG_ERR_INITIALIZED in this case. This is experimental for + now. + + * "./autogen.sh --build-w32" does now also build a DLL for W32. + Translations are not yet provided for this platform. + + * New error codes GPG_ERR_UNKNOWN_EXTN and GPG_ERR_UNKNOWN_CRIT_EXTN. + + * New error code GPG_ERR_LOCKED. + + * New translations included for France, Romania, and Vietnamese. + + * Interface changes relative to the 1.1 release: +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +GPG_ERR_UNKNOWN_EXTN NEW +GPG_ERR_UNKNOWN_CRIT_EXTN NEW +GPG_ERR_LOCKED NEW +gpg_err_init NEW +GPG_ERR_INITIALIZED NEW +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + +Noteworthy changes in version 1.1 (2005-06-20) +---------------------------------------------- + + * Bug fixes. + + +Noteworthy changes in version 1.0 (2004-07-30) +---------------------------------------------- + + * Ported to Solaris 2.8. + + * Added a new error source GPG_ERR_SOURCE_GSTI, and new error + codes GPG_ERR_PROTOCOL_VIOLATION and GPG_ERR_INV_MAC for this + source. + + * Interface changes relative to the 0.7 release: +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +GPG_ERR_SOURCE_GSTI NEW +GPG_ERR_PROTOCOL_VIOLATION NEW +GPG_ERR_INV_MAC NEW +GPG_ERR_INV_REQUEST NEW +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Noteworthy changes in version 0.7 (2004-03-07) +---------------------------------------------- + + * libgpg-error can be built on systems where the errno macros do not + evaluate to plain numbers, but expressions. If you want to + cross-compile, you might have to set CC_FOR_BUILD, though. + + * A new tool gpg-error to convert error numbers into symbols into + strings is provided. + + * Interface changes relative to the 0.6 release: +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +GPG_ERR_LOCALE_PROBLEM NEW +GPG_ERR_NOT_LOCKED NEW +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Noteworthy changes in version 0.6 (2003-11-14) +---------------------------------------------- + + * German translation included. + + * It is now possible to use the inline functions even for non C99 + compliant compilers by given e.g. -DGPG_ERR_INLINE=inline when + compiling an application using this library. Note, that gcc will + use inline anyway. + + * Interface changes relative to the 0.5 release: +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +GPG_ERR_SOURCE_KSBA NEW +GPG_ERR_SOURCE_DIRMNGR NEW +GPG_ERR_TRUNCATED NEW +GPG_ERR_NO_ENCODING_METHOD NEW +GPG_ERR_NO_ENCRYPTION_SCHEME NEW +GPG_ERR_NO_SIGNATURE_SCHEME NEW +GPG_ERR_INV_ATTR NEW +GPG_ERR_NO_VALUE NEW +GPG_ERR_NOT_FOUND NEW +GPG_ERR_VALUE_NOT_FOUND NEW +GPG_ERR_SYNTAX NEW +GPG_ERR_INV_CRL NEW +GPG_ERR_BAD_BER NEW +GPG_ERR_INV_BER NEW +GPG_ERR_ELEMENT_NOT_FOUND NEW +GPG_ERR_IDENTIFIER_NOT_FOUND NEW +GPG_ERR_INV_TAG NEW +GPG_ERR_INV_LENGTH NEW +GPG_ERR_INV_KEYINFO NEW +GPG_ERR_UNEXPECTED_TAG NEW +GPG_ERR_NOT_DER_ENCODED, NEW +GPG_ERR_NO_CMS_OBJ NEW +GPG_ERR_INV_CMS_OBJ NEW +GPG_ERR_UNKNOWN_CMS_OBJ, NEW +GPG_ERR_UNSUPPORTED_CMS_OBJ NEW +GPG_ERR_UNSUPPORTED_ENCODING, NEW +GPG_ERR_UNSUPPORTED_CMS_VERSION NEW +GPG_ERR_UNKNOWN_ALGORITHM NEW +GPG_ERR_ENCODING_PROBLEM NEW +GPG_ERR_INV_STATE NEW +GPG_ERR_DUP_VALUE, NEW +GPG_ERR_MISSING_ACTION NEW +GPG_ERR_MODULE_NOT_FOUND NEW +GPG_ERR_INV_OID_STRING NEW +GPG_ERR_INV_TIME NEW +GPG_ERR_INV_CRL_OBJ NEW +GPG_ERR_UNSUPPORTED_CRL_VERSION NEW +GPG_ERR_INV_CERT_OBJ NEW +GPG_ERR_UNKNOWN_NAME NEW +GPG_ERR_BUFFER_TOO_SHORT. NEW +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Noteworthy changes in version 0.5 (2003-10-06) +---------------------------------------------- + + * New thread safe interface gpg_strerror_r. + + * New error code GPG_ERR_PIN_NOT_SYNCED has been added. + + * Interface changes relative to the 0.4 release: +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +gpg_strerror_r NEW +GPG_ERR_PIN_NOT_SYNCED NEW +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + +Noteworthy changes in version 0.4 (2003-09-03) +---------------------------------------------- + + * Fixed another bug that prevented that system errors were created + correctly in the first place. + + * Use inline in public header file only on C99 compilers. + + +Noteworthy changes in version 0.3 (2003-07-31) +---------------------------------------------- + + * Fixed bug that prevented that system errors were mapped to error + strings correctly. + + +Noteworthy changes in version 0.2 (2003-07-30) +---------------------------------------------- + + * Value of the error code GPG_ERR_CANCELED was fixed. + + * New error codes GPG_ERR_WRONG_CARD, GPG_ERR_HARDWARE, + GPG_ERR_PIN_BLOCKED and GPG_ERR_USE_CONDITIONS have been added. + + * The header file has been made C++ clean. + + * AM_PATH_GPG_ERR has been fixed to work without explicit version + number. + + * The header file now uses inline instead __inline__ for non-GNU + compilers. + + +Noteworthy changes in version 0.1 (2003-06-06) +---------------------------------------------- + + * Initial release. + + + Copyright 2003, 2004, 2005, 2010 g10 Code GmbH + + This file is free software; as a special exception the author gives + unlimited permission to copy and/or distribute it, with or without + modifications, as long as this notice is preserved. + + This file is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY, to the extent permitted by law; without even the + implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. diff --git a/README b/README new file mode 100644 index 0000000..bab9c95 --- /dev/null +++ b/README @@ -0,0 +1,168 @@ +What is Libgpg-error +==================== + +Libgpg-error is a library that defines common error values for all +GnuPG components. Among these are GPG, GPGSM, GPGME, GPG-Agent, +libgcrypt, Libksba, DirMngr, Pinentry, SmartCard Daemon and more. +Meanwhile Libgcrypt also sports functions commonly used by all GnuPG +components and which are believed to be generally useful. The main +components are + + - Structured error codes and utility functions. + + - Replacement functions for stdio stream (estream) to provide a + reliable set of printf features on all platforms. For convenience + macros are provided to make migration from stdio to estream easier + (ie. the prefix "es_") + + - Generic Mutex implementation for all platforms using an ABI + independent of the underlying implementation. + + - A lean gettext and iconv implementation for Windows. + + - Log functions + + - Option parser + + - BAse-64 encoder and decoder. + +More components will be added over time. Most functions are prefixed +with "gpgrt" (GnuPG Run Time) instead of "gpg_err" to indicate the +long term plan to rename this library to gpgrt. + +Libgpg-error is free software; you can redistribute it and/or modify +it under the terms of the GNU Lesser General Public License as +published by the Free Software Foundation; either version 2.1 of the +License, or (at your option) any later version. See the file +COPYING.LIB for copyright and warranty information. See the file +AUTHORS for a list of authors and important mail addresses. + +However, some files (for example src/mkerrnos.awk) used in the build +process of the library and the manual are covered by a different +license. Please see the header of these files and the file COPYING +for copyright and warranty information on these files. A special +exception in the copyright license of these files makes sure that the +output in the build process, which is used in libgpg-error, is not +affected by the GPL. + + +Installation +============ + +Please read the file INSTALL! + +Here is a quick summary: + +1) Check that you have unmodified sources. You can find instructions + how to verify the sources below. Don't skip this - it is an + important step! + +2) Unpack the archive. With GNU tar you can do it this way: + "tar xjvf libgpg-error-x.y.tar.bz2" + +3) "cd libgpg-error-x.y" + +4) "./configure" + +5) "make" + +6) "make install" + + +How to Verify the Source +======================== + +In order to check that the version of libgpg-error which you are going +to install is an original and unmodified copy of the original, you can +do it in one of the following ways: + +a) If you already have a trusted version of GnuPG installed, you can + simply check the supplied signature: + + $ gpg --verify libgpg-error-x.y.tar.bz2.sig libgpg-error-x.y.tar.bz2 + + This checks that the detached signature libgpg-error-x.y.tar.bz2.sig + is indeed a signature of libgpg-error-x.y.tar.bz2. Make sure that + the signature has been created by a trusted keys. + + Please note that you have to use an old version of GnuPG to do all + this stuff. *Never* use the version which was built using the + library you are trying to verify! + +b) If you don't have any a trusted version of GnuPG, you can attempt + to verify the SHA1 checksum, using a trusted version of the sha1sum + program: + + $ sha1sum libgpg-error-x.y.tar.bz2 + + This should yield an output _similar_ to this: + + 610064e5b77700f5771c8fde2691c4365e1ca100 libgpg-error-x.y.tar.bz2 + + Now check that this checksum is _exactly_ the same as the one + published via the announcement list and probably via Usenet. + + +Hints +===== + +To build for Windows you you may use the convenience command: + + ./autogen.sh --build-w32 + +which runs configure with suitable options. There is also basic +support for building a 64 bit Windows version: + + ./autogen.sh --build-w64 + + +Cross-Compiling +=============== + +Libgpg-error needs to figure out some platform specific properties. +These are used to build the platform specific gpg-error.h file. The +detection is done during build time but can't be done when +cross-compiling. Thus if you run into an error during building you +need to figure out these values. You may use these commands: + + build="$(build-aux/config.guess)" + ./configure --prefix=TARGETDIR --host=TARGET --build=$build + cd src + make gen-posix-lock-obj + scp gen-posix-lock-obj TARGET: + ssh TARGET ./gen-posix-lock-obj >tmp.h + mv tmp.h "syscfg/$(awk 'NR==1 {print $2}' tmp.h)" + +If you are using a VPATH build adjust accordingly. If this all works +for you (make sure to run the test programs on the target platform), +please send the generated file to the gnupg-devel mailing list so that +we can include it in the next release. Note that in addition to the +aliasing done by config.sub the src/mkheader build tool does some +extra aliasing to avoid having too much identical syscfg files. + + + +Known Problems +============== + +On Windows, WSA Error Codes can be provided as system error codes and +will be transparently converted to the corresponding gpg error codes. +There are two problems with this support: + +* Not all error codes corresponding to WSA Error codes have a detailed + description when printed with gpg_strerror. Some will default to + "Unknown error" for pretty printing. For example, WSAEHOSTDOWN will + be translated to GPG_ERR_EHOSTDOWN, but there is no corresponding + EHOSTDOWN in Windows and thus gpg_strerror will default to "Unknown + error" as printed by the system's strerror function for the argument + WSAEHOSTDOWN. (This could be fixed by adding our own error strings + replacing or extending the system error strings, including their + translations). + +* The translation to a gpg error code and back to a system error code + in some cases does not preserve information. For example, the error + code WSAEACCES translates to GPG_ERR_EACCES, which translates back + to EACCES. + +Any WSA Error code has either the first problem or the second (but not +both), depending on if there is a corresponding Windows error code. diff --git a/THANKS b/THANKS new file mode 100644 index 0000000..9f37446 --- /dev/null +++ b/THANKS @@ -0,0 +1,16 @@ + +Albrecht Dreß albrecht.dress at arcor de +Guillaume Libersat glibersat at hurdfr org +Jakub Bogusz qboosh at pld-linux org +Petr Pisar petr.pisar at atlas cz + + + Copyright 2004, 2005 g10 Code GmbH + + This file is free software; as a special exception the author gives + unlimited permission to copy and/or distribute it, with or without + modifications, as long as this notice is preserved. + + This file is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY, to the extent permitted by law; without even the + implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. diff --git a/VERSION b/VERSION new file mode 100644 index 0000000..d0911c8 --- /dev/null +++ b/VERSION @@ -0,0 +1 @@ +1.31 diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..694b989 --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,1375 @@ +# generated automatically by aclocal 1.14.1 -*- Autoconf -*- + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. + +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) + +# intlmacosx.m4 serial 5 (gettext-0.18.2) +dnl Copyright (C) 2004-2014 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Checks for special options needed on Mac OS X. +dnl Defines INTL_MACOSX_LIBS. +AC_DEFUN([gt_INTL_MACOSX], +[ + dnl Check for API introduced in Mac OS X 10.2. + AC_CACHE_CHECK([for CFPreferencesCopyAppValue], + [gt_cv_func_CFPreferencesCopyAppValue], + [gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + AC_LINK_IFELSE( + [AC_LANG_PROGRAM( + [[#include ]], + [[CFPreferencesCopyAppValue(NULL, NULL)]])], + [gt_cv_func_CFPreferencesCopyAppValue=yes], + [gt_cv_func_CFPreferencesCopyAppValue=no]) + LIBS="$gt_save_LIBS"]) + if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then + AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1], + [Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework.]) + fi + dnl Check for API introduced in Mac OS X 10.3. + AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent], + [gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + AC_LINK_IFELSE( + [AC_LANG_PROGRAM( + [[#include ]], + [[CFLocaleCopyCurrent();]])], + [gt_cv_func_CFLocaleCopyCurrent=yes], + [gt_cv_func_CFLocaleCopyCurrent=no]) + LIBS="$gt_save_LIBS"]) + if test $gt_cv_func_CFLocaleCopyCurrent = yes; then + AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1], + [Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the CoreFoundation framework.]) + fi + INTL_MACOSX_LIBS= + if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then + INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" + fi + AC_SUBST([INTL_MACOSX_LIBS]) +]) + +# longlong.m4 serial 17 +dnl Copyright (C) 1999-2007, 2009-2014 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl From Paul Eggert. + +# Define HAVE_LONG_LONG_INT if 'long long int' works. +# This fixes a bug in Autoconf 2.61, and can be faster +# than what's in Autoconf 2.62 through 2.68. + +# Note: If the type 'long long int' exists but is only 32 bits large +# (as on some very old compilers), HAVE_LONG_LONG_INT will not be +# defined. In this case you can treat 'long long int' like 'long int'. + +AC_DEFUN([AC_TYPE_LONG_LONG_INT], +[ + AC_REQUIRE([AC_TYPE_UNSIGNED_LONG_LONG_INT]) + AC_CACHE_CHECK([for long long int], [ac_cv_type_long_long_int], + [ac_cv_type_long_long_int=yes + if test "x${ac_cv_prog_cc_c99-no}" = xno; then + ac_cv_type_long_long_int=$ac_cv_type_unsigned_long_long_int + if test $ac_cv_type_long_long_int = yes; then + dnl Catch a bug in Tandem NonStop Kernel (OSS) cc -O circa 2004. + dnl If cross compiling, assume the bug is not important, since + dnl nobody cross compiles for this platform as far as we know. + AC_RUN_IFELSE( + [AC_LANG_PROGRAM( + [[@%:@include + @%:@ifndef LLONG_MAX + @%:@ define HALF \ + (1LL << (sizeof (long long int) * CHAR_BIT - 2)) + @%:@ define LLONG_MAX (HALF - 1 + HALF) + @%:@endif]], + [[long long int n = 1; + int i; + for (i = 0; ; i++) + { + long long int m = n << i; + if (m >> i != n) + return 1; + if (LLONG_MAX / 2 < m) + break; + } + return 0;]])], + [], + [ac_cv_type_long_long_int=no], + [:]) + fi + fi]) + if test $ac_cv_type_long_long_int = yes; then + AC_DEFINE([HAVE_LONG_LONG_INT], [1], + [Define to 1 if the system has the type 'long long int'.]) + fi +]) + +# Define HAVE_UNSIGNED_LONG_LONG_INT if 'unsigned long long int' works. +# This fixes a bug in Autoconf 2.61, and can be faster +# than what's in Autoconf 2.62 through 2.68. + +# Note: If the type 'unsigned long long int' exists but is only 32 bits +# large (as on some very old compilers), AC_TYPE_UNSIGNED_LONG_LONG_INT +# will not be defined. In this case you can treat 'unsigned long long int' +# like 'unsigned long int'. + +AC_DEFUN([AC_TYPE_UNSIGNED_LONG_LONG_INT], +[ + AC_CACHE_CHECK([for unsigned long long int], + [ac_cv_type_unsigned_long_long_int], + [ac_cv_type_unsigned_long_long_int=yes + if test "x${ac_cv_prog_cc_c99-no}" = xno; then + AC_LINK_IFELSE( + [_AC_TYPE_LONG_LONG_SNIPPET], + [], + [ac_cv_type_unsigned_long_long_int=no]) + fi]) + if test $ac_cv_type_unsigned_long_long_int = yes; then + AC_DEFINE([HAVE_UNSIGNED_LONG_LONG_INT], [1], + [Define to 1 if the system has the type 'unsigned long long int'.]) + fi +]) + +# Expands to a C program that can be used to test for simultaneous support +# of 'long long' and 'unsigned long long'. We don't want to say that +# 'long long' is available if 'unsigned long long' is not, or vice versa, +# because too many programs rely on the symmetry between signed and unsigned +# integer types (excluding 'bool'). +AC_DEFUN([_AC_TYPE_LONG_LONG_SNIPPET], +[ + AC_LANG_PROGRAM( + [[/* For now, do not test the preprocessor; as of 2007 there are too many + implementations with broken preprocessors. Perhaps this can + be revisited in 2012. In the meantime, code should not expect + #if to work with literals wider than 32 bits. */ + /* Test literals. */ + long long int ll = 9223372036854775807ll; + long long int nll = -9223372036854775807LL; + unsigned long long int ull = 18446744073709551615ULL; + /* Test constant expressions. */ + typedef int a[((-9223372036854775807LL < 0 && 0 < 9223372036854775807ll) + ? 1 : -1)]; + typedef int b[(18446744073709551615ULL <= (unsigned long long int) -1 + ? 1 : -1)]; + int i = 63;]], + [[/* Test availability of runtime routines for shift and division. */ + long long int llmax = 9223372036854775807ll; + unsigned long long int ullmax = 18446744073709551615ull; + return ((ll << 63) | (ll >> 63) | (ll < i) | (ll > i) + | (llmax / ll) | (llmax % ll) + | (ull << 63) | (ull >> 63) | (ull << i) | (ull >> i) + | (ullmax / ull) | (ullmax % ull));]]) +]) + +# Copyright (C) 2002-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.14' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.14.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.14.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is '.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each '.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. +m4_define([AC_PROG_CC], +m4_defn([AC_PROG_CC]) +[_AM_PROG_CC_C_O +]) + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi +]) + +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) + +# Copyright (C) 2003-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAINTAINER_MODE([DEFAULT-MODE]) +# ---------------------------------- +# Control maintainer-specific portions of Makefiles. +# Default is to disable them, unless 'enable' is passed literally. +# For symmetry, 'disable' may be passed as well. Anyway, the user +# can override the default with the --enable/--disable switch. +AC_DEFUN([AM_MAINTAINER_MODE], +[m4_case(m4_default([$1], [disable]), + [enable], [m4_define([am_maintainer_other], [disable])], + [disable], [m4_define([am_maintainer_other], [enable])], + [m4_define([am_maintainer_other], [enable]) + m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) +AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode's default is 'disable' unless 'enable' is passed + AC_ARG_ENABLE([maintainer-mode], + [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], + am_maintainer_other[ make rules and dependencies not useful + (and sometimes confusing) to the casual installer])], + [USE_MAINTAINER_MODE=$enableval], + [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST([MAINT])dnl +] +) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_CC_C_O +# --------------- +# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC +# to automatically call this. +AC_DEFUN([_AM_PROG_CC_C_O], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +AC_LANG_PUSH([C])dnl +AC_CACHE_CHECK( + [whether $CC understands -c and -o together], + [am_cv_prog_cc_c_o], + [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i]) +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +AC_LANG_POP([C])]) + +# For backward compatibility. +AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_RUN_LOG(COMMAND) +# ------------------- +# Run COMMAND, save the exit status in ac_status, and log it. +# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) +AC_DEFUN([AM_RUN_LOG], +[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD + ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + (exit $ac_status); }]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) + +# Copyright (C) 2009-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor 'install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in "make install-strip", and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +# +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' + +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + + [m4_case([$1], + [ustar], + [# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi + AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi], + + [pax], + [], + + [m4_fatal([Unknown tar format])]) + + AC_MSG_CHECKING([how to create a $1 tar archive]) + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_$1-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi + done + rm -rf conftest.dir + + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([m4/autobuild.m4]) +m4_include([m4/estream.m4]) +m4_include([m4/gettext.m4]) +m4_include([m4/gnupg-misc.m4]) +m4_include([m4/iconv.m4]) +m4_include([m4/lib-ld.m4]) +m4_include([m4/lib-link.m4]) +m4_include([m4/lib-prefix.m4]) +m4_include([m4/libtool.m4]) +m4_include([m4/lock.m4]) +m4_include([m4/ltoptions.m4]) +m4_include([m4/ltsugar.m4]) +m4_include([m4/ltversion.m4]) +m4_include([m4/lt~obsolete.m4]) +m4_include([m4/nls.m4]) +m4_include([m4/po.m4]) +m4_include([m4/progtest.m4]) +m4_include([m4/readline.m4]) +m4_include([m4/threadlib.m4]) diff --git a/autogen.rc b/autogen.rc new file mode 100644 index 0000000..4e1918a --- /dev/null +++ b/autogen.rc @@ -0,0 +1,26 @@ +# autogen.sh configuration for libgpg-error -*- sh -*- + +display_name="Libgpg-error" +patches_to="gnupg-devel@gnupg.org" + +version_parts=2 + +case "$myhost:$myhostsub" in + w32:ce) + extraoptions= + ;; + w32:64) + extraoptions= + ;; + w32:) + extraoptions= + ;; +esac + +case "$myhost" in + w32) + configure_opts= + ;; +esac + +final_info="./configure --enable-maintainer-mode && make" diff --git a/autogen.sh b/autogen.sh new file mode 100755 index 0000000..23d27f3 --- /dev/null +++ b/autogen.sh @@ -0,0 +1,517 @@ +#! /bin/sh +# autogen.sh +# Copyright (C) 2003, 2014, 2017, 2018 g10 Code GmbH +# +# This file is free software; as a special exception the author gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the +# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# +# This is a generic script to create the configure script and handle cross +# build environments. It requires the presence of a autogen.rc file to +# configure it for the respective package. It is maintained as part of +# GnuPG and source copied by other packages. +# +# Version: 2018-02-21 + +configure_ac="configure.ac" + +cvtver () { + awk 'NR==1 {split($NF,A,".");X=1000000*A[1]+1000*A[2]+A[3];print X;exit 0}' +} + +check_version () { + if [ $(( `("$1" --version || echo "0") | cvtver` >= $2 )) = 1 ]; then + return 0 + fi + echo "**Error**: "\`$1\'" not installed or too old." >&2 + echo ' Version '$3' or newer is required.' >&2 + [ -n "$4" ] && echo ' Note that this is part of '\`$4\''.' >&2 + DIE="yes" + return 1 +} + +fatal () { + echo "autogen.sh:" "$*" >&2 + DIE=yes +} + +info () { + if [ -z "${SILENT}" ]; then + echo "autogen.sh:" "$*" >&2 + fi +} + +die_p () { + if [ "$DIE" = "yes" ]; then + echo "autogen.sh: Stop." >&2 + exit 1 + fi +} + +replace_sysroot () { + configure_opts=$(echo $configure_opts | sed "s#@SYSROOT@#${w32root}#g") + extraoptions=$(echo $extraoptions | sed "s#@SYSROOT@#${w32root}#g") +} + +# Allow to override the default tool names +AUTOCONF=${AUTOCONF_PREFIX}${AUTOCONF:-autoconf}${AUTOCONF_SUFFIX} +AUTOHEADER=${AUTOCONF_PREFIX}${AUTOHEADER:-autoheader}${AUTOCONF_SUFFIX} + +AUTOMAKE=${AUTOMAKE_PREFIX}${AUTOMAKE:-automake}${AUTOMAKE_SUFFIX} +ACLOCAL=${AUTOMAKE_PREFIX}${ACLOCAL:-aclocal}${AUTOMAKE_SUFFIX} + +GETTEXT=${GETTEXT_PREFIX}${GETTEXT:-gettext}${GETTEXT_SUFFIX} +MSGMERGE=${GETTEXT_PREFIX}${MSGMERGE:-msgmerge}${GETTEXT_SUFFIX} + +DIE=no +FORCE= +SILENT= +PRINT_HOST=no +PRINT_BUILD=no +tmp=$(dirname "$0") +tsdir=$(cd "${tmp}"; pwd) +version_parts=3 + +if [ -n "${AUTOGEN_SH_SILENT}" ]; then + SILENT=" --silent" +fi +if test x"$1" = x"--help"; then + echo "usage: ./autogen.sh [OPTIONS] [ARGS]" + echo " Options:" + echo " --silent Silent operation" + echo " --force Pass --force to autoconf" + echo " --find-version Helper for configure.ac" + echo " --git-build Run all commands to build from a Git" + echo " --print-host Print only the host triplet" + echo " --print-build Print only the build platform triplet" + echo " --build-TYPE Configure to cross build for TYPE" + echo "" + echo " ARGS are passed to configure in --build-TYPE mode." + echo " Configuration for this script is expected in autogen.rc" + exit 0 +fi +if test x"$1" = x"--silent"; then + SILENT=" --silent" + shift +fi +if test x"$1" = x"--force"; then + FORCE=" --force" + shift +fi +if test x"$1" = x"--print-host"; then + PRINT_HOST=yes + shift +fi +if test x"$1" = x"--print-build"; then + PRINT_BUILD=yes + shift +fi + + +# Reject unsafe characters in $HOME, $tsdir and cwd. We consider spaces +# as unsafe because it is too easy to get scripts wrong in this regard. +am_lf=' +' +case `pwd` in + *[\;\\\"\#\$\&\'\`$am_lf\ \ ]*) + fatal "unsafe working directory name" ;; +esac +case $tsdir in + *[\;\\\"\#\$\&\'\`$am_lf\ \ ]*) + fatal "unsafe source directory: \`$tsdir'" ;; +esac +case $HOME in + *[\;\\\"\#\$\&\'\`$am_lf\ \ ]*) + fatal "unsafe home directory: \`$HOME'" ;; +esac +die_p + + +# List of variables sourced from autogen.rc. The strings '@SYSROOT@' in +# these variables are replaced by the actual system root. +configure_opts= +extraoptions= +# List of optional variables sourced from autogen.rc and ~/.gnupg-autogen.rc +w32_toolprefixes= +w32_extraoptions= +w32ce_toolprefixes= +w32ce_extraoptions= +w64_toolprefixes= +w64_extraoptions= +amd64_toolprefixes= +# End list of optional variables sourced from ~/.gnupg-autogen.rc +# What follows are variables which are sourced but default to +# environment variables or lacking them hardcoded values. +#w32root= +#w32ce_root= +#w64root= +#amd64root= + +# Convenience option to use certain configure options for some hosts. +myhost="" +myhostsub="" +case "$1" in + --find-version) + myhost="find-version" + SILENT=" --silent" + shift + ;; + --git-build) + myhost="git-build" + shift + ;; + --build-w32) + myhost="w32" + shift + ;; + --build-w32ce) + myhost="w32" + myhostsub="ce" + shift + ;; + --build-w64) + myhost="w32" + myhostsub="64" + shift + ;; + --build-amd64) + myhost="amd64" + shift + ;; + --build*) + fatal "**Error**: invalid build option $1" + shift + ;; + *) + ;; +esac +die_p + + +# **** GIT BUILD **** +# This is a helper to build from git. +if [ "$myhost" = "git-build" ]; then + tmp="$(pwd)" + cd "$tsdir" || fatal "error cd-ing to $tsdir" + ./autogen.sh || fatal "error running ./autogen.sh" + cd "$tmp" || fatal "error cd-ing back to $tmp" + die_p + "$tsdir"/configure || fatal "error running $tsdir/configure" + die_p + make || fatal "error running make" + die_p + make check || fatal "error running male check" + die_p + exit 0 +fi +# **** end GIT BUILD **** + + +# Source our configuration +if [ -f "${tsdir}/autogen.rc" ]; then + . "${tsdir}/autogen.rc" +fi + +# Source optional site specific configuration +if [ -f "$HOME/.gnupg-autogen.rc" ]; then + info "sourcing extra definitions from $HOME/.gnupg-autogen.rc" + . "$HOME/.gnupg-autogen.rc" +fi + + +# **** FIND VERSION **** +# This is a helper for the configure.ac M4 magic +# Called +# ./autogen.sh --find-version PACKAGE MAJOR MINOR [MICRO] +# returns a complete version string with automatic beta numbering. +if [ "$myhost" = "find-version" ]; then + package="$1" + major="$2" + minor="$3" + micro="$4" + + if [ -z "$package" -o -z "$major" -o -z "$minor" ]; then + echo "usage: ./autogen.sh --find-version PACKAGE MAJOR MINOR [MICRO]" >&2 + exit 1 + fi + + case "$version_parts" in + 2) + matchstr1="$package-$major.[0-9]*" + matchstr2="$package-$major-base" + vers="$major.$minor" + ;; + *) + matchstr1="$package-$major.$minor.[0-9]*" + matchstr2="$package-$major.$minor-base" + vers="$major.$minor.$micro" + ;; + esac + + beta=no + if [ -e .git ]; then + ingit=yes + tmp=$(git describe --match "${matchstr1}" --long 2>/dev/null) + tmp=$(echo "$tmp" | sed s/^"$package"//) + if [ -n "$tmp" ]; then + tmp=$(echo "$tmp" | sed s/^"$package"// \ + | awk -F- '$3!=0 && $3 !~ /^beta/ {print"-beta"$3}') + else + tmp=$(git describe --match "${matchstr2}" --long 2>/dev/null \ + | awk -F- '$4!=0{print"-beta"$4}') + fi + [ -n "$tmp" ] && beta=yes + rev=$(git rev-parse --short HEAD | tr -d '\n\r') + rvd=$((0x$(echo ${rev} | dd bs=1 count=4 2>/dev/null))) + else + ingit=no + beta=yes + tmp="-unknown" + rev="0000000" + rvd="0" + fi + + echo "$package-$vers$tmp:$beta:$ingit:$vers$tmp:$vers:$tmp:$rev:$rvd:" + exit 0 +fi +# **** end FIND VERSION **** + + +if [ ! -f "$tsdir/build-aux/config.guess" ]; then + fatal "$tsdir/build-aux/config.guess not found" + exit 1 +fi +build=`$tsdir/build-aux/config.guess` +if [ $PRINT_BUILD = yes ]; then + echo "$build" + exit 0 +fi + + + +# ****************** +# W32 build script +# ****************** +if [ "$myhost" = "w32" ]; then + case $myhostsub in + ce) + w32root="$w32ce_root" + [ -z "$w32root" ] && w32root="$HOME/w32ce_root" + toolprefixes="$w32ce_toolprefixes arm-mingw32ce" + extraoptions="$extraoptions $w32ce_extraoptions" + ;; + 64) + w32root="$w64root" + [ -z "$w32root" ] && w32root="$HOME/w64root" + toolprefixes="$w64_toolprefixes x86_64-w64-mingw32" + extraoptions="$extraoptions $w64_extraoptions" + ;; + *) + [ -z "$w32root" ] && w32root="$HOME/w32root" + toolprefixes="$w32_toolprefixes i686-w64-mingw32 i586-mingw32msvc" + toolprefixes="$toolprefixes i386-mingw32msvc mingw32" + extraoptions="$extraoptions $w32_extraoptions" + ;; + esac + info "Using $w32root as standard install directory" + replace_sysroot + + # Locate the cross compiler + crossbindir= + for host in $toolprefixes; do + if ${host}-gcc --version >/dev/null 2>&1 ; then + crossbindir=/usr/${host}/bin + conf_CC="CC=${host}-gcc" + break; + fi + done + if [ -z "$crossbindir" ]; then + fatal "cross compiler kit not installed" + if [ -z "$myhostsub" ]; then + info "Under Debian GNU/Linux, you may install it using" + info " apt-get install mingw32 mingw32-runtime mingw32-binutils" + fi + die_p + fi + if [ $PRINT_HOST = yes ]; then + echo "$host" + exit 0 + fi + + if [ -f "$tsdir/config.log" ]; then + if ! head $tsdir/config.log | grep "$host" >/dev/null; then + fatal "Please run a 'make distclean' first" + die_p + fi + fi + + $tsdir/configure --enable-maintainer-mode ${SILENT} \ + --prefix=${w32root} \ + --host=${host} --build=${build} SYSROOT=${w32root} \ + PKG_CONFIG_LIBDIR=${w32root}/lib/pkgconfig \ + ${configure_opts} ${extraoptions} "$@" + rc=$? + exit $rc +fi +# ***** end W32 build script ******* + +# ***** AMD64 cross build script ******* +# Used to cross-compile for AMD64 (for testing) +if [ "$myhost" = "amd64" ]; then + [ -z "$amd64root" ] && amd64root="$HOME/amd64root" + info "Using $amd64root as standard install directory" + replace_sysroot + + toolprefixes="$amd64_toolprefixes x86_64-linux-gnu amd64-linux-gnu" + + # Locate the cross compiler + crossbindir= + for host in $toolprefixes ; do + if ${host}-gcc --version >/dev/null 2>&1 ; then + crossbindir=/usr/${host}/bin + conf_CC="CC=${host}-gcc" + break; + fi + done + if [ -z "$crossbindir" ]; then + echo "Cross compiler kit not installed" >&2 + echo "Stop." >&2 + exit 1 + fi + if [ $PRINT_HOST = yes ]; then + echo "$host" + exit 0 + fi + + if [ -f "$tsdir/config.log" ]; then + if ! head $tsdir/config.log | grep "$host" >/dev/null; then + echo "Please run a 'make distclean' first" >&2 + exit 1 + fi + fi + + $tsdir/configure --enable-maintainer-mode ${SILENT} \ + --prefix=${amd64root} \ + --host=${host} --build=${build} \ + ${configure_opts} ${extraoptions} "$@" + rc=$? + exit $rc +fi +# ***** end AMD64 cross build script ******* + + +# Grep the required versions from configure.ac +autoconf_vers=`sed -n '/^AC_PREREQ(/ { +s/^.*(\(.*\))/\1/p +q +}' ${configure_ac}` +autoconf_vers_num=`echo "$autoconf_vers" | cvtver` + +automake_vers=`sed -n '/^min_automake_version=/ { +s/^.*="\(.*\)"/\1/p +q +}' ${configure_ac}` +automake_vers_num=`echo "$automake_vers" | cvtver` + +if [ -d "${tsdir}/po" ]; then + gettext_vers=`sed -n '/^AM_GNU_GETTEXT_VERSION(/ { +s/^.*\[\(.*\)])/\1/p +q +}' ${configure_ac}` + gettext_vers_num=`echo "$gettext_vers" | cvtver` +else + gettext_vers="n/a" +fi + +if [ -z "$autoconf_vers" -o -z "$automake_vers" -o -z "$gettext_vers" ] +then + echo "**Error**: version information not found in "\`${configure_ac}\'"." >&2 + exit 1 +fi + + +if check_version $AUTOCONF $autoconf_vers_num $autoconf_vers ; then + check_version $AUTOHEADER $autoconf_vers_num $autoconf_vers autoconf +fi +if check_version $AUTOMAKE $automake_vers_num $automake_vers; then + check_version $ACLOCAL $automake_vers_num $autoconf_vers automake +fi +if [ "$gettext_vers" != "n/a" ]; then + if check_version $GETTEXT $gettext_vers_num $gettext_vers; then + check_version $MSGMERGE $gettext_vers_num $gettext_vers gettext + fi +fi + +if [ "$DIE" = "yes" ]; then + cat </dev/null 2>/dev/null; then + [ -z "${SILENT}" ] && CP="$CP -v" + fi + if [ -f .git/hooks/pre-commit.sample -a ! -f .git/hooks/pre-commit ] ; then + [ -z "${SILENT}" ] && cat <. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/build-aux/config.guess b/build-aux/config.guess new file mode 100755 index 0000000..c4bd827 --- /dev/null +++ b/build-aux/config.guess @@ -0,0 +1,1456 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright 1992-2016 Free Software Foundation, Inc. + +timestamp='2016-05-15' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). +# +# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess +# +# Please send patches to . + + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright 1992-2016 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +case "${UNAME_SYSTEM}" in +Linux|GNU|GNU/*) + # If the system lacks a compiler, then just pick glibc. + # We could probably try harder. + LIBC=gnu + + eval $set_cc_for_build + cat <<-EOF > $dummy.c + #include + #if defined(__UCLIBC__) + LIBC=uclibc + #elif defined(__dietlibc__) + LIBC=dietlibc + #else + LIBC=gnu + #endif + EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` + ;; +esac + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ + /sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || \ + echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + earmv*) + arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'` + endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'` + machine=${arch}${endian}-unknown + ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently (or will in the future) and ABI. + case "${UNAME_MACHINE_ARCH}" in + earm*) + os=netbsdelf + ;; + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # Determine ABI tags. + case "${UNAME_MACHINE_ARCH}" in + earm*) + expr='s/^earmv[0-9]/-eabi/;s/eb$//' + abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"` + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}${abi}" + exit ;; + *:Bitrig:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:LibertyBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-libertybsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:Sortix:*:*) + echo ${UNAME_MACHINE}-unknown-sortix + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE=alpha ;; + "EV4.5 (21064)") + UNAME_MACHINE=alpha ;; + "LCA4 (21066/21068)") + UNAME_MACHINE=alpha ;; + "EV5 (21164)") + UNAME_MACHINE=alphaev5 ;; + "EV5.6 (21164A)") + UNAME_MACHINE=alphaev56 ;; + "EV5.6 (21164PC)") + UNAME_MACHINE=alphapca56 ;; + "EV5.7 (21164PC)") + UNAME_MACHINE=alphapca57 ;; + "EV6 (21264)") + UNAME_MACHINE=alphaev6 ;; + "EV6.7 (21264A)") + UNAME_MACHINE=alphaev67 ;; + "EV6.8CB (21264C)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8AL (21264B)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8CX (21264D)") + UNAME_MACHINE=alphaev68 ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE=alphaev69 ;; + "EV7 (21364)") + UNAME_MACHINE=alphaev7 ;; + "EV7.9 (21364A)") + UNAME_MACHINE=alphaev79 ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm*:riscos:*:*|arm*:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH=i386 + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH=x86_64 + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/lslpp ] ; then + IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | + awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 + 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH=hppa2.0n ;; + 64) HP_ARCH=hppa2.0w ;; + '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = hppa2.0w ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH=hppa2.0w + else + HP_ARCH=hppa64 + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`/usr/bin/uname -p` + case ${UNAME_PROCESSOR} in + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW64*:*) + echo ${UNAME_MACHINE}-pc-mingw64 + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + *:MSYS*:*) + echo ${UNAME_MACHINE}-pc-msys + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + aarch64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC=gnulibc1 ; fi + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + arc:Linux:*:* | arceb:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi + else + echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + cris:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-${LIBC} + exit ;; + crisv32:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-${LIBC} + exit ;; + e2k:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + frv:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + hexagon:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + i*86:Linux:*:*) + echo ${UNAME_MACHINE}-pc-linux-${LIBC} + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + k1om:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } + ;; + openrisc*:Linux:*:*) + echo or1k-unknown-linux-${LIBC} + exit ;; + or32:Linux:*:* | or1k*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-${LIBC} + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-${LIBC} + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; + PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; + *) echo hppa-unknown-linux-${LIBC} ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-${LIBC} + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-${LIBC} + exit ;; + ppc64le:Linux:*:*) + echo powerpc64le-unknown-linux-${LIBC} + exit ;; + ppcle:Linux:*:*) + echo powerpcle-unknown-linux-${LIBC} + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux-${LIBC} + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + tile*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-${LIBC} + exit ;; + x86_64:Linux:*:*) + echo ${UNAME_MACHINE}-pc-linux-${LIBC} + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configure will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + x86_64:Haiku:*:*) + echo x86_64-unknown-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + SX-ACE:SUPER-UX:*:*) + echo sxace-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + eval $set_cc_for_build + if test "$UNAME_PROCESSOR" = unknown ; then + UNAME_PROCESSOR=powerpc + fi + if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + case $UNAME_PROCESSOR in + i386) UNAME_PROCESSOR=x86_64 ;; + powerpc) UNAME_PROCESSOR=powerpc64 ;; + esac + fi + fi + elif test "$UNAME_PROCESSOR" = i386 ; then + # Avoid executing cc on OS X 10.9, as it ships with a stub + # that puts up a graphical alert prompting to install + # developer tools. Any system running Mac OS X 10.7 or + # later (Darwin 11 and later) is required to have a 64-bit + # processor. This is not true of the ARM version of Darwin + # that Apple uses in portable devices. + UNAME_PROCESSOR=x86_64 + fi + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = x86; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-?:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk${UNAME_RELEASE} + exit ;; + NSE-*:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = 386; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'` + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo ${UNAME_MACHINE}-unknown-esx + exit ;; + amd64:Isilon\ OneFS:*:*) + echo x86_64-unknown-onefs + exit ;; +esac + +cat >&2 </dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/build-aux/config.rpath b/build-aux/config.rpath new file mode 100755 index 0000000..b625621 --- /dev/null +++ b/build-aux/config.rpath @@ -0,0 +1,684 @@ +#! /bin/sh +# Output a system dependent set of variables, describing how to set the +# run time search path of shared libraries in an executable. +# +# Copyright 1996-2014 Free Software Foundation, Inc. +# Taken from GNU libtool, 2001 +# Originally by Gordon Matzigkeit , 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. +# +# The first argument passed to this file is the canonical host specification, +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld +# should be set by the caller. +# +# The set of defined variables is at the end of this script. + +# Known limitations: +# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer +# than 256 bytes, otherwise the compiler driver will dump core. The only +# known workaround is to choose shorter directory names for the build +# directory and/or the installation directory. + +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +shrext=.so + +host="$1" +host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + +# Code taken from libtool.m4's _LT_CC_BASENAME. + +for cc_temp in $CC""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` + +# Code taken from libtool.m4's _LT_COMPILER_PIC. + +wl= +if test "$GCC" = yes; then + wl='-Wl,' +else + case "$host_os" in + aix*) + wl='-Wl,' + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) + ;; + hpux9* | hpux10* | hpux11*) + wl='-Wl,' + ;; + irix5* | irix6* | nonstopux*) + wl='-Wl,' + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + ecc*) + wl='-Wl,' + ;; + icc* | ifort*) + wl='-Wl,' + ;; + lf95*) + wl='-Wl,' + ;; + nagfor*) + wl='-Wl,-Wl,,' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + wl='-Wl,' + ;; + ccc*) + wl='-Wl,' + ;; + xl* | bgxl* | bgf* | mpixl*) + wl='-Wl,' + ;; + como) + wl='-lopt=' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ F* | *Sun*Fortran*) + wl= + ;; + *Sun\ C*) + wl='-Wl,' + ;; + esac + ;; + esac + ;; + newsos6) + ;; + *nto* | *qnx*) + ;; + osf3* | osf4* | osf5*) + wl='-Wl,' + ;; + rdos*) + ;; + solaris*) + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + wl='-Qoption ld ' + ;; + *) + wl='-Wl,' + ;; + esac + ;; + sunos4*) + wl='-Qoption ld ' + ;; + sysv4 | sysv4.2uw2* | sysv4.3*) + wl='-Wl,' + ;; + sysv4*MP*) + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + wl='-Wl,' + ;; + unicos*) + wl='-Wl,' + ;; + uts4*) + ;; + esac +fi + +# Code taken from libtool.m4's _LT_LINKER_SHLIBS. + +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no + +case "$host_os" in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + # Unlike libtool, we use -rpath here, not --rpath, since the documented + # option of GNU ld is called -rpath, not --rpath. + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + case "$host_os" in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + fi + ;; + amigaos*) + case "$host_cpu" in + powerpc) + ;; + m68k) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + cygwin* | mingw* | pw32* | cegcc*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + haiku*) + ;; + interix[3-9]*) + hardcode_direct=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + netbsd*) + ;; + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + else + ld_shlibs=no + fi + ;; + esac + ;; + sunos4*) + hardcode_direct=yes + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + esac + if test "$ld_shlibs" = no; then + hardcode_libdir_flag_spec= + fi +else + case "$host_os" in + aix3*) + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + else + aix_use_runtimelinking=no + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + fi + hardcode_direct=yes + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + fi + # Begin _LT_AC_SYS_LIBPATH_AIX. + echo 'int main () { return 0; }' > conftest.c + ${CC} ${LDFLAGS} conftest.c -o conftest + aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + fi + if test -z "$aix_libpath"; then + aix_libpath="/usr/lib:/lib" + fi + rm -f conftest.c conftest + # End _LT_AC_SYS_LIBPATH_AIX. + if test "$aix_use_runtimelinking" = yes; then + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + else + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + fi + fi + ;; + amigaos*) + case "$host_cpu" in + powerpc) + ;; + m68k) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + bsdi[45]*) + ;; + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + libext=lib + ;; + darwin* | rhapsody*) + hardcode_direct=no + if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then + : + else + ld_shlibs=no + fi + ;; + dgux*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + freebsd2.[01]*) + hardcode_direct=yes + hardcode_minus_L=yes + ;; + freebsd* | dragonfly*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + hpux9*) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + hpux10*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + hpux11*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + ;; + *) + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + irix5* | irix6* | nonstopux*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + netbsd*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + newsos6) + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + *nto* | *qnx*) + ;; + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + else + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + osf3*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + osf4* | osf5*) + if test "$GCC" = yes; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + # Both cc and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + solaris*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + sunos4*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + ;; + sysv4) + case $host_vendor in + sni) + hardcode_direct=yes # is this really true??? + ;; + siemens) + hardcode_direct=no + ;; + motorola) + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + ;; + sysv4.3*) + ;; + sysv4*MP*) + if test -d /usr/nec; then + ld_shlibs=yes + fi + ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + ;; + sysv5* | sco3.2v5* | sco5v6*) + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator=':' + ;; + uts4*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + *) + ld_shlibs=no + ;; + esac +fi + +# Check dynamic linker characteristics +# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. +# Unlike libtool.m4, here we don't care about _all_ names of the library, but +# only about the one the linker finds when passed -lNAME. This is the last +# element of library_names_spec in libtool.m4, or possibly two of them if the +# linker has special search rules. +library_names_spec= # the last element of library_names_spec in libtool.m4 +libname_spec='lib$name' +case "$host_os" in + aix3*) + library_names_spec='$libname.a' + ;; + aix[4-9]*) + library_names_spec='$libname$shrext' + ;; + amigaos*) + case "$host_cpu" in + powerpc*) + library_names_spec='$libname$shrext' ;; + m68k) + library_names_spec='$libname.a' ;; + esac + ;; + beos*) + library_names_spec='$libname$shrext' + ;; + bsdi[45]*) + library_names_spec='$libname$shrext' + ;; + cygwin* | mingw* | pw32* | cegcc*) + shrext=.dll + library_names_spec='$libname.dll.a $libname.lib' + ;; + darwin* | rhapsody*) + shrext=.dylib + library_names_spec='$libname$shrext' + ;; + dgux*) + library_names_spec='$libname$shrext' + ;; + freebsd[23].*) + library_names_spec='$libname$shrext$versuffix' + ;; + freebsd* | dragonfly*) + library_names_spec='$libname$shrext' + ;; + gnu*) + library_names_spec='$libname$shrext' + ;; + haiku*) + library_names_spec='$libname$shrext' + ;; + hpux9* | hpux10* | hpux11*) + case $host_cpu in + ia64*) + shrext=.so + ;; + hppa*64*) + shrext=.sl + ;; + *) + shrext=.sl + ;; + esac + library_names_spec='$libname$shrext' + ;; + interix[3-9]*) + library_names_spec='$libname$shrext' + ;; + irix5* | irix6* | nonstopux*) + library_names_spec='$libname$shrext' + case "$host_os" in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; + *) libsuff= shlibsuff= ;; + esac + ;; + esac + ;; + linux*oldld* | linux*aout* | linux*coff*) + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + library_names_spec='$libname$shrext' + ;; + knetbsd*-gnu) + library_names_spec='$libname$shrext' + ;; + netbsd*) + library_names_spec='$libname$shrext' + ;; + newsos6) + library_names_spec='$libname$shrext' + ;; + *nto* | *qnx*) + library_names_spec='$libname$shrext' + ;; + openbsd*) + library_names_spec='$libname$shrext$versuffix' + ;; + os2*) + libname_spec='$name' + shrext=.dll + library_names_spec='$libname.a' + ;; + osf3* | osf4* | osf5*) + library_names_spec='$libname$shrext' + ;; + rdos*) + ;; + solaris*) + library_names_spec='$libname$shrext' + ;; + sunos4*) + library_names_spec='$libname$shrext$versuffix' + ;; + sysv4 | sysv4.3*) + library_names_spec='$libname$shrext' + ;; + sysv4*MP*) + library_names_spec='$libname$shrext' + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + library_names_spec='$libname$shrext' + ;; + tpf*) + library_names_spec='$libname$shrext' + ;; + uts4*) + library_names_spec='$libname$shrext' + ;; +esac + +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' +escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` +shlibext=`echo "$shrext" | sed -e 's,^\.,,'` +escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` + +LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). + + +# Please send patches to . +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright 1992-2016 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ + linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + android-linux) + os=-linux-android + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze*) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*178) + os=-lynxos178 + ;; + -lynx*5) + os=-lynxos5 + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | aarch64 | aarch64_be \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arceb \ + | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ + | avr | avr32 \ + | ba \ + | be32 | be64 \ + | bfin \ + | c4x | c8051 | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | e2k | epiphany \ + | fido | fr30 | frv | ft32 \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | hexagon \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | k1om \ + | le32 | le64 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa32r6 | mipsisa32r6el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64r6 | mipsisa64r6el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipsr5900 | mipsr5900el \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nds32 | nds32le | nds32be \ + | nios | nios2 | nios2eb | nios2el \ + | ns16k | ns32k \ + | open8 | or1k | or1knd | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pyramid \ + | riscv32 | riscv64 \ + | rl78 | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | visium \ + | we32k \ + | x86 | xc16x | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + c54x) + basic_machine=tic54x-unknown + ;; + c55x) + basic_machine=tic55x-unknown + ;; + c6x) + basic_machine=tic6x-unknown + ;; + leon|leon[3-9]) + basic_machine=sparc-$basic_machine + ;; + m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + xgate) + basic_machine=$basic_machine-unknown + os=-none + ;; + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | aarch64-* | aarch64_be-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | ba-* \ + | be32-* | be64-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* \ + | c8051-* | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | e2k-* | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | hexagon-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | k1om-* \ + | le32-* | le64-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ + | microblaze-* | microblazeel-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa32r6-* | mipsisa32r6el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64r6-* | mipsisa64r6el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipsr5900-* | mipsr5900el-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nds32-* | nds32le-* | nds32be-* \ + | nios-* | nios2-* | nios2eb-* | nios2el-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ + | or1k*-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pyramid-* \ + | riscv32-* | riscv64-* \ + | rl78-* | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ + | tahoe-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile*-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ + | vax-* \ + | visium-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + asmjs) + basic_machine=asmjs-unknown + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c54x-*) + basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c55x-*) + basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c6x-*) + basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16 | cr16-*) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + e500v[12]) + basic_machine=powerpc-unknown + os=$os"spe" + ;; + e500v[12]-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + os=$os"spe" + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + leon-*|leon[3-9]-*) + basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'` + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze*) + basic_machine=microblaze-xilinx + ;; + mingw64) + basic_machine=x86_64-pc + os=-mingw64 + ;; + mingw32) + basic_machine=i686-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + moxiebox) + basic_machine=moxie-unknown + os=-moxiebox + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + msys) + basic_machine=i686-pc + os=-msys + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + nacl) + basic_machine=le32-unknown + os=-nacl + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + neo-tandem) + basic_machine=neo-tandem + ;; + nse-tandem) + basic_machine=nse-tandem + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc | ppcbe) basic_machine=powerpc-unknown + ;; + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos | rdos64) + basic_machine=x86_64-pc + os=-rdos + ;; + rdos32) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tile*) + basic_machine=$basic_machine-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* | -plan9* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* | -cloudabi* | -sortix* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ + | -linux-newlib* | -linux-musl* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \ + | -onefs* | -tirtos* | -phoenix*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -nacl*) + ;; + -ios) + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + c8051-*) + os=-elf + ;; + hexagon-*) + os=-elf + ;; + tic54x-*) + os=-coff + ;; + tic55x-*) + os=-coff + ;; + tic6x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/build-aux/depcomp b/build-aux/depcomp new file mode 100755 index 0000000..f0a474c --- /dev/null +++ b/build-aux/depcomp @@ -0,0 +1,791 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2013-05-30.07; # UTC + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by 'PROGRAMS ARGS'. + object Object file output by 'PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputting dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +# Get the directory component of the given path, and save it in the +# global variables '$dir'. Note that this directory component will +# be either empty or ending with a '/' character. This is deliberate. +set_dir_from () +{ + case $1 in + */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; + *) dir=;; + esac +} + +# Get the suffix-stripped basename of the given path, and save it the +# global variable '$base'. +set_base_from () +{ + base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` +} + +# If no dependency file was actually created by the compiler invocation, +# we still have to create a dummy depfile, to avoid errors with the +# Makefile "include basename.Plo" scheme. +make_dummy_depfile () +{ + echo "#dummy" > "$depfile" +} + +# Factor out some common post-processing of the generated depfile. +# Requires the auxiliary global variable '$tmpdepfile' to be set. +aix_post_process_depfile () +{ + # If the compiler actually managed to produce a dependency file, + # post-process it. + if test -f "$tmpdepfile"; then + # Each line is of the form 'foo.o: dependency.h'. + # Do two passes, one to just change these to + # $object: dependency.h + # and one to simply output + # dependency.h: + # which is needed to avoid the deleted-header problem. + { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" + sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" + } > "$depfile" + rm -f "$tmpdepfile" + else + make_dummy_depfile + fi +} + +# A tabulation character. +tab=' ' +# A newline character. +nl=' +' +# Character ranges might be problematic outside the C locale. +# These definitions help. +upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ +lower=abcdefghijklmnopqrstuvwxyz +digits=0123456789 +alpha=${upper}${lower} + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Avoid interferences from the environment. +gccflag= dashmflag= + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp +fi + +if test "$depmode" = msvc7msys; then + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 +fi + +if test "$depmode" = xlc; then + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. + gccflag=-qmakedep=gcc,-MF + depmode=gcc +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. +## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. +## (see the conditional assignment to $gccflag above). +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). Also, it might not be +## supported by the other compilers which use the 'gcc' depmode. +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The second -e expression handles DOS-style file names with drive + # letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the "deleted header file" problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. +## Some versions of gcc put a space before the ':'. On the theory +## that the space means something, we add a space to the output as +## well. hp depmode also adds that space, but also prefixes the VPATH +## to the object. Take care to not repeat it in the output. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like '#:fec' to the end of the + # dependency line. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ + | tr "$nl" ' ' >> "$depfile" + echo >> "$depfile" + # The second pass generates a dummy entry for each header file. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + make_dummy_depfile + fi + rm -f "$tmpdepfile" + ;; + +xlc) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts '$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + set_dir_from "$object" + set_base_from "$object" + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + aix_post_process_depfile + ;; + +tcc) + # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 + # FIXME: That version still under development at the moment of writing. + # Make that this statement remains true also for stable, released + # versions. + # It will wrap lines (doesn't matter whether long or short) with a + # trailing '\', as in: + # + # foo.o : \ + # foo.c \ + # foo.h \ + # + # It will put a trailing '\' even on the last line, and will use leading + # spaces rather than leading tabs (at least since its commit 0394caf7 + # "Emit spaces for -MD"). + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. + # We have to change lines of the first kind to '$object: \'. + sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" + # And for each line of the second kind, we have to emit a 'dep.h:' + # dummy dependency, to avoid the deleted-header problem. + sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" + rm -f "$tmpdepfile" + ;; + +## The order of this option in the case statement is important, since the +## shell code in configure will try each of these formats in the order +## listed in this file. A plain '-MD' option would be understood by many +## compilers, so we must ensure this comes after the gcc and icc options. +pgcc) + # Portland's C compiler understands '-MD'. + # Will always output deps to 'file.d' where file is the root name of the + # source file under compilation, even if file resides in a subdirectory. + # The object file name does not affect the name of the '.d' file. + # pgcc 10.2 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using '\' : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + set_dir_from "$object" + # Use the source, not the object, to determine the base name, since + # that's sadly what pgcc will do too. + set_base_from "$source" + tmpdepfile=$base.d + + # For projects that build the same source file twice into different object + # files, the pgcc approach of using the *source* file root name can cause + # problems in parallel builds. Use a locking strategy to avoid stomping on + # the same $tmpdepfile. + lockdir=$base.d-lock + trap " + echo '$0: caught signal, cleaning up...' >&2 + rmdir '$lockdir' + exit 1 + " 1 2 13 15 + numtries=100 + i=$numtries + while test $i -gt 0; do + # mkdir is a portable test-and-set. + if mkdir "$lockdir" 2>/dev/null; then + # This process acquired the lock. + "$@" -MD + stat=$? + # Release the lock. + rmdir "$lockdir" + break + else + # If the lock is being held by a different process, wait + # until the winning process is done or we timeout. + while test -d "$lockdir" && test $i -gt 0; do + sleep 1 + i=`expr $i - 1` + done + fi + i=`expr $i - 1` + done + trap - 1 2 13 15 + if test $i -le 0; then + echo "$0: failed to acquire lock after $numtries attempts" >&2 + echo "$0: check lockdir '$lockdir'" >&2 + exit 1 + fi + + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + set_dir_from "$object" + set_base_from "$object" + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" + # Add 'dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + make_dummy_depfile + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in 'foo.d' instead, so we check for that too. + # Subdirectories are respected. + set_dir_from "$object" + set_base_from "$object" + + if test "$libtool" = yes; then + # Libtool generates 2 separate objects for the 2 libraries. These + # two compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir$base.o.d # libtool 1.5 + tmpdepfile2=$dir.libs/$base.o.d # Likewise. + tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + # Same post-processing that is required for AIX mode. + aix_post_process_depfile + ;; + +msvc7) + if test "$libtool" = yes; then + showIncludes=-Wc,-showIncludes + else + showIncludes=-showIncludes + fi + "$@" $showIncludes > "$tmpdepfile" + stat=$? + grep -v '^Note: including file: ' "$tmpdepfile" + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The first sed program below extracts the file names and escapes + # backslashes for cygpath. The second sed program outputs the file + # name when reading, but also accumulates all include files in the + # hold buffer in order to output them again at the end. This only + # works with sed implementations that can handle large buffers. + sed < "$tmpdepfile" -n ' +/^Note: including file: *\(.*\)/ { + s//\1/ + s/\\/\\\\/g + p +}' | $cygpath_u | sort -u | sed -n ' +s/ /\\ /g +s/\(.*\)/'"$tab"'\1 \\/p +s/.\(.*\) \\/\1:/ +H +$ { + s/.*/'"$tab"'/ + G + p +}' >> "$depfile" + echo >> "$depfile" # make sure the fragment doesn't end with a backslash + rm -f "$tmpdepfile" + ;; + +msvc7msys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for ':' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. + "$@" $dashmflag | + sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this sed invocation + # correctly. Breaking it into two sed invocations is a workaround. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + # makedepend may prepend the VPATH from the source file name to the object. + # No need to regex-escape $object, excess matching of '.' is harmless. + sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process the last invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed '1,2d' "$tmpdepfile" \ + | tr ' ' "$nl" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E \ + | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + | sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" + echo "$tab" >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/build-aux/git-log-fix b/build-aux/git-log-fix new file mode 100644 index 0000000..af702fe --- /dev/null +++ b/build-aux/git-log-fix @@ -0,0 +1,3 @@ +# This file is expected to be used via gitlog-to-changelog's --amend=FILE +# option. It specifies what changes to make to each given SHA1's commit +# log and metadata, using Perl-eval'able expressions. diff --git a/build-aux/git-log-footer b/build-aux/git-log-footer new file mode 100644 index 0000000..c31fe93 --- /dev/null +++ b/build-aux/git-log-footer @@ -0,0 +1,14 @@ + +2011-12-01 Werner Koch + + NB: Changes done before December 1st, 2011 are described in + per directory files named ChangeLog-2011. See doc/HACKING for + details. + + ----- + Copyright (C) 2011 Free Software Foundation, Inc. + + Copying and distribution of this file and/or the original GIT + commit log messages, with or without modification, are + permitted provided the copyright notice and this notice are + preserved. diff --git a/build-aux/install-sh b/build-aux/install-sh new file mode 100755 index 0000000..377bb86 --- /dev/null +++ b/build-aux/install-sh @@ -0,0 +1,527 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2011-11-20.07; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# 'make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call 'install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names problematic for 'test' and other utilities. + case $src in + -* | [=\(\)!]) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + dst=$dst_arg + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/build-aux/ltmain.sh b/build-aux/ltmain.sh new file mode 100644 index 0000000..c3bcdc0 --- /dev/null +++ b/build-aux/ltmain.sh @@ -0,0 +1,9677 @@ + +# libtool (GNU libtool) 2.4.2 +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from https://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --no-quiet, --no-silent +# print informational messages (default) +# --no-warn don't display warning messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print more informational messages than default +# --no-verbose don't print the extra informational messages +# --version print version information +# -h, --help, --help-all print short, long, or detailed help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. When passed as first option, +# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to . +# GNU libtool home page: . +# General help using GNU software: . + +PROGRAM=libtool +PACKAGE=libtool +VERSION="2.4.2 Debian-2.4.2-1" +TIMESTAMP="" +package_revision=1.3337 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# NLS nuisances: We save the old values to restore during execute mode. +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done +LC_ALL=C +LANGUAGE=C +export LANGUAGE LC_ALL + +$lt_unset CDPATH + + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + + + +: ${CP="cp -f"} +test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +dirname="s,/[^/]*$,," +basename="s,^.*/,," + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} # func_dirname may be replaced by extended shell implementation + + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "${1}" | $SED "$basename"` +} # func_basename may be replaced by extended shell implementation + + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` +} # func_dirname_and_basename may be replaced by extended shell implementation + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname may be replaced by extended shell implementation + + +# These SED scripts presuppose an absolute path with a trailing slash. +pathcar='s,^/\([^/]*\).*$,\1,' +pathcdr='s,^/[^/]*,,' +removedotparts=':dotsl + s@/\./@/@g + t dotsl + s,/\.$,/,' +collapseslashes='s@/\{1,\}@/@g' +finalslash='s,/*$,/,' + +# func_normal_abspath PATH +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +# value returned in "$func_normal_abspath_result" +func_normal_abspath () +{ + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` + while :; do + # Processed it all yet? + if test "$func_normal_abspath_tpath" = / ; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result" ; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + +# func_relative_path SRCDIR DSTDIR +# generates a relative path from SRCDIR to DSTDIR, with a trailing +# slash if non-empty, suitable for immediately appending a filename +# without needing to append a separator. +# value returned in "$func_relative_path_result" +func_relative_path () +{ + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=${func_dirname_result} + if test "x$func_relative_path_tlibdir" = x ; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test "x$func_stripname_result" != x ; then + func_relative_path_result=${func_relative_path_result}/${func_stripname_result} + fi + + # Normalisation. If bindir is libdir, return empty string, + # else relative path ending with a slash; either way, target + # file name can be directly appended. + if test ! -z "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result/" + func_relative_path_result=$func_stripname_result + fi +} + +# The name of this program: +func_dirname_and_basename "$progpath" +progname=$func_basename_result + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=${PATH_SEPARATOR-:} + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' + +# Sed substitution that converts a w32 file name or path +# which contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + +# Sed substitution to remove simple comments and empty +# lines from a Windows .def file. +sed_uncomment_deffile='/^;/d; /^[ ]*$/d' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }$*" +} + +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + done + my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} + + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + + $ECHO "$my_tmpdir" +} + + +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "$1" | $SED \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + + +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + +# func_tr_sh +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $opt_debug + + $SED -n '/(C)/!b go + :more + /\./!{ + N + s/\n# / / + b more + } + :go + /^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $opt_debug + + $SED -n '/^# Usage:/,/^# *.*--help/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + echo + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help [NOEXIT] +# Echo long help message to standard output and exit, +# unless 'noexit' is passed as argument. +func_help () +{ + $opt_debug + + $SED -n '/^# Usage:/,/# Report bugs to/ { + :print + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ + p + d + } + /^# .* home page:/b print + /^# General help using/b print + ' < "$progpath" + ret=$? + if test -z "$1"; then + exit $ret + fi +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + $opt_debug + + func_error "missing argument for $1." + exit_cmd=exit +} + + +# func_split_short_opt shortopt +# Set func_split_short_opt_name and func_split_short_opt_arg shell +# variables after splitting SHORTOPT after the 2nd character. +func_split_short_opt () +{ + my_sed_short_opt='1s/^\(..\).*$/\1/;q' + my_sed_short_rest='1s/^..\(.*\)$/\1/;q' + + func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` + func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` +} # func_split_short_opt may be replaced by extended shell implementation + + +# func_split_long_opt longopt +# Set func_split_long_opt_name and func_split_long_opt_arg shell +# variables after splitting LONGOPT at the `=' sign. +func_split_long_opt () +{ + my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' + my_sed_long_arg='1s/^--[^=]*=//' + + func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` + func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` +} # func_split_long_opt may be replaced by extended shell implementation + +exit_cmd=: + + + + + +magic="%%%MAGIC variable%%%" +magic_exe="%%%MAGIC EXE variable%%%" + +# Global variables. +nonopt= +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "${1}=\$${1}\${2}" +} # func_append may be replaced by extended shell implementation + +# func_append_quoted var value +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +func_append_quoted () +{ + func_quote_for_eval "${2}" + eval "${1}=\$${1}\\ \$func_quote_for_eval_result" +} # func_append_quoted may be replaced by extended shell implementation + + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "${@}"` +} # func_arith may be replaced by extended shell implementation + + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` +} # func_len may be replaced by extended shell implementation + + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} # func_lo2o may be replaced by extended shell implementation + + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +} # func_xform may be replaced by extended shell implementation + + +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} + + +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + +# func_features +# Display the features supported by this script. +func_features () +{ + echo "host: $host" + if test "$build_libtool_libs" = yes; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + + exit $? +} + +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +# Shorthand for --mode=foo, only valid as the first argument +case $1 in +clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; +compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; +execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; +finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; +install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; +link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; +uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; +esac + + + +# Option defaults: +opt_debug=: +opt_dry_run=false +opt_config=false +opt_preserve_dup_deps=false +opt_features=false +opt_finish=false +opt_help=false +opt_help_all=false +opt_silent=: +opt_warning=: +opt_verbose=: +opt_silent=false +opt_verbose=false + + +# Parse options once, thoroughly. This comes as soon as possible in the +# script to make things like `--version' happen as quickly as we can. +{ + # this just eases exit handling + while test $# -gt 0; do + opt="$1" + shift + case $opt in + --debug|-x) opt_debug='set -x' + func_echo "enabling shell trace mode" + $opt_debug + ;; + --dry-run|--dryrun|-n) + opt_dry_run=: + ;; + --config) + opt_config=: +func_config + ;; + --dlopen|-dlopen) + optarg="$1" + opt_dlopen="${opt_dlopen+$opt_dlopen +}$optarg" + shift + ;; + --preserve-dup-deps) + opt_preserve_dup_deps=: + ;; + --features) + opt_features=: +func_features + ;; + --finish) + opt_finish=: +set dummy --mode finish ${1+"$@"}; shift + ;; + --help) + opt_help=: + ;; + --help-all) + opt_help_all=: +opt_help=': help-all' + ;; + --mode) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_mode="$optarg" +case $optarg in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; +esac + shift + ;; + --no-silent|--no-quiet) + opt_silent=false +func_append preserve_args " $opt" + ;; + --no-warning|--no-warn) + opt_warning=false +func_append preserve_args " $opt" + ;; + --no-verbose) + opt_verbose=false +func_append preserve_args " $opt" + ;; + --silent|--quiet) + opt_silent=: +func_append preserve_args " $opt" + opt_verbose=false + ;; + --verbose|-v) + opt_verbose=: +func_append preserve_args " $opt" +opt_silent=false + ;; + --tag) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_tag="$optarg" +func_append preserve_args " $opt $optarg" +func_enable_tag "$optarg" + shift + ;; + + -\?|-h) func_usage ;; + --help) func_help ;; + --version) func_version ;; + + # Separate optargs to long options: + --*=*) + func_split_long_opt "$opt" + set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} + shift + ;; + + # Separate non-argument short options: + -\?*|-h*|-n*|-v*) + func_split_short_opt "$opt" + set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + --) break ;; + -*) func_fatal_help "unrecognized option \`$opt'" ;; + *) set dummy "$opt" ${1+"$@"}; shift; break ;; + esac + done + + # Validate options: + + # save first non-option argument + if test "$#" -gt 0; then + nonopt="$opt" + shift + fi + + # preserve --debug + test "$opt_debug" = : || func_append preserve_args " --debug" + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + + $opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test "$opt_mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$opt_mode' for more information." + } + + + # Bail if the options were screwed + $exit_cmd $EXIT_FAILURE +} + + + + +## ----------- ## +## Main. ## +## ----------- ## + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_resolve_sysroot PATH +# Replace a leading = in PATH with a sysroot. Store the result into +# func_resolve_sysroot_result +func_resolve_sysroot () +{ + func_resolve_sysroot_result=$1 + case $func_resolve_sysroot_result in + =*) + func_stripname '=' '' "$func_resolve_sysroot_result" + func_resolve_sysroot_result=$lt_sysroot$func_stripname_result + ;; + esac +} + +# func_replace_sysroot PATH +# If PATH begins with the sysroot, replace it with = and +# store the result into func_replace_sysroot_result. +func_replace_sysroot () +{ + case "$lt_sysroot:$1" in + ?*:"$lt_sysroot"*) + func_stripname "$lt_sysroot" '' "$1" + func_replace_sysroot_result="=$func_stripname_result" + ;; + *) + # Including no sysroot. + func_replace_sysroot_result=$1 + ;; + esac +} + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case "$@ " in + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi + + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T </dev/null` + if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then + func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | + $SED -e "$lt_sed_naive_backslashify"` + else + func_convert_core_file_wine_to_w32_result= + fi + fi +} +# end: func_convert_core_file_wine_to_w32 + + +# func_convert_core_path_wine_to_w32 ARG +# Helper function used by path conversion functions when $build is *nix, and +# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly +# configured wine environment available, with the winepath program in $build's +# $PATH. Assumes ARG has no leading or trailing path separator characters. +# +# ARG is path to be converted from $build format to win32. +# Result is available in $func_convert_core_path_wine_to_w32_result. +# Unconvertible file (directory) names in ARG are skipped; if no directory names +# are convertible, then the result may be empty. +func_convert_core_path_wine_to_w32 () +{ + $opt_debug + # unfortunately, winepath doesn't convert paths, only file names + func_convert_core_path_wine_to_w32_result="" + if test -n "$1"; then + oldIFS=$IFS + IFS=: + for func_convert_core_path_wine_to_w32_f in $1; do + IFS=$oldIFS + func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" + if test -n "$func_convert_core_file_wine_to_w32_result" ; then + if test -z "$func_convert_core_path_wine_to_w32_result"; then + func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" + else + func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" + fi + fi + done + IFS=$oldIFS + fi +} +# end: func_convert_core_path_wine_to_w32 + + +# func_cygpath ARGS... +# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when +# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) +# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or +# (2), returns the Cygwin file name or path in func_cygpath_result (input +# file name or path is assumed to be in w32 format, as previously converted +# from $build's *nix or MSYS format). In case (3), returns the w32 file name +# or path in func_cygpath_result (input file name or path is assumed to be in +# Cygwin format). Returns an empty string on error. +# +# ARGS are passed to cygpath, with the last one being the file name or path to +# be converted. +# +# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH +# environment variable; do not put it in $PATH. +func_cygpath () +{ + $opt_debug + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then + func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` + if test "$?" -ne 0; then + # on failure, ensure result is empty + func_cygpath_result= + fi + else + func_cygpath_result= + func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" + fi +} +#end: func_cygpath + + +# func_convert_core_msys_to_w32 ARG +# Convert file name or path ARG from MSYS format to w32 format. Return +# result in func_convert_core_msys_to_w32_result. +func_convert_core_msys_to_w32 () +{ + $opt_debug + # awkward: cmd appends spaces to result + func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` +} +#end: func_convert_core_msys_to_w32 + + +# func_convert_file_check ARG1 ARG2 +# Verify that ARG1 (a file name in $build format) was converted to $host +# format in ARG2. Otherwise, emit an error message, but continue (resetting +# func_to_host_file_result to ARG1). +func_convert_file_check () +{ + $opt_debug + if test -z "$2" && test -n "$1" ; then + func_error "Could not determine host file name corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_file_result="$1" + fi +} +# end func_convert_file_check + + +# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH +# Verify that FROM_PATH (a path in $build format) was converted to $host +# format in TO_PATH. Otherwise, emit an error message, but continue, resetting +# func_to_host_file_result to a simplistic fallback value (see below). +func_convert_path_check () +{ + $opt_debug + if test -z "$4" && test -n "$3"; then + func_error "Could not determine the host path corresponding to" + func_error " \`$3'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This is a deliberately simplistic "conversion" and + # should not be "improved". See libtool.info. + if test "x$1" != "x$2"; then + lt_replace_pathsep_chars="s|$1|$2|g" + func_to_host_path_result=`echo "$3" | + $SED -e "$lt_replace_pathsep_chars"` + else + func_to_host_path_result="$3" + fi + fi +} +# end func_convert_path_check + + +# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG +# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT +# and appending REPL if ORIG matches BACKPAT. +func_convert_path_front_back_pathsep () +{ + $opt_debug + case $4 in + $1 ) func_to_host_path_result="$3$func_to_host_path_result" + ;; + esac + case $4 in + $2 ) func_append func_to_host_path_result "$3" + ;; + esac +} +# end func_convert_path_front_back_pathsep + + +################################################## +# $build to $host FILE NAME CONVERSION FUNCTIONS # +################################################## +# invoked via `$to_host_file_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# Result will be available in $func_to_host_file_result. + + +# func_to_host_file ARG +# Converts the file name ARG from $build format to $host format. Return result +# in func_to_host_file_result. +func_to_host_file () +{ + $opt_debug + $to_host_file_cmd "$1" +} +# end func_to_host_file + + +# func_to_tool_file ARG LAZY +# converts the file name ARG from $build format to toolchain format. Return +# result in func_to_tool_file_result. If the conversion in use is listed +# in (the comma separated) LAZY, no conversion takes place. +func_to_tool_file () +{ + $opt_debug + case ,$2, in + *,"$to_tool_file_cmd",*) + func_to_tool_file_result=$1 + ;; + *) + $to_tool_file_cmd "$1" + func_to_tool_file_result=$func_to_host_file_result + ;; + esac +} +# end func_to_tool_file + + +# func_convert_file_noop ARG +# Copy ARG to func_to_host_file_result. +func_convert_file_noop () +{ + func_to_host_file_result="$1" +} +# end func_convert_file_noop + + +# func_convert_file_msys_to_w32 ARG +# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_file_result. +func_convert_file_msys_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_to_host_file_result="$func_convert_core_msys_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_w32 + + +# func_convert_file_cygwin_to_w32 ARG +# Convert file name ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_file_cygwin_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # because $build is cygwin, we call "the" cygpath in $PATH; no need to use + # LT_CYGPATH in this case. + func_to_host_file_result=`cygpath -m "$1"` + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_cygwin_to_w32 + + +# func_convert_file_nix_to_w32 ARG +# Convert file name ARG from *nix to w32 format. Requires a wine environment +# and a working winepath. Returns result in func_to_host_file_result. +func_convert_file_nix_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_file_wine_to_w32 "$1" + func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_w32 + + +# func_convert_file_msys_to_cygwin ARG +# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_file_msys_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_cygpath -u "$func_convert_core_msys_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_cygwin + + +# func_convert_file_nix_to_cygwin ARG +# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed +# in a wine environment, working winepath, and LT_CYGPATH set. Returns result +# in func_to_host_file_result. +func_convert_file_nix_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. + func_convert_core_file_wine_to_w32 "$1" + func_cygpath -u "$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_cygwin + + +############################################# +# $build to $host PATH CONVERSION FUNCTIONS # +############################################# +# invoked via `$to_host_path_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# The result will be available in $func_to_host_path_result. +# +# Path separators are also converted from $build format to $host format. If +# ARG begins or ends with a path separator character, it is preserved (but +# converted to $host format) on output. +# +# All path conversion functions are named using the following convention: +# file name conversion function : func_convert_file_X_to_Y () +# path conversion function : func_convert_path_X_to_Y () +# where, for any given $build/$host combination the 'X_to_Y' value is the +# same. If conversion functions are added for new $build/$host combinations, +# the two new functions must follow this pattern, or func_init_to_host_path_cmd +# will break. + + +# func_init_to_host_path_cmd +# Ensures that function "pointer" variable $to_host_path_cmd is set to the +# appropriate value, based on the value of $to_host_file_cmd. +to_host_path_cmd= +func_init_to_host_path_cmd () +{ + $opt_debug + if test -z "$to_host_path_cmd"; then + func_stripname 'func_convert_file_' '' "$to_host_file_cmd" + to_host_path_cmd="func_convert_path_${func_stripname_result}" + fi +} + + +# func_to_host_path ARG +# Converts the path ARG from $build format to $host format. Return result +# in func_to_host_path_result. +func_to_host_path () +{ + $opt_debug + func_init_to_host_path_cmd + $to_host_path_cmd "$1" +} +# end func_to_host_path + + +# func_convert_path_noop ARG +# Copy ARG to func_to_host_path_result. +func_convert_path_noop () +{ + func_to_host_path_result="$1" +} +# end func_convert_path_noop + + +# func_convert_path_msys_to_w32 ARG +# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_path_result. +func_convert_path_msys_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from ARG. MSYS + # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; + # and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_msys_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_msys_to_w32 + + +# func_convert_path_cygwin_to_w32 ARG +# Convert path ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_path_cygwin_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_cygwin_to_w32 + + +# func_convert_path_nix_to_w32 ARG +# Convert path ARG from *nix to w32 format. Requires a wine environment and +# a working winepath. Returns result in func_to_host_file_result. +func_convert_path_nix_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_nix_to_w32 + + +# func_convert_path_msys_to_cygwin ARG +# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_path_msys_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_msys_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_msys_to_cygwin + + +# func_convert_path_nix_to_cygwin ARG +# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a +# a wine environment, working winepath, and LT_CYGPATH set. Returns result in +# func_to_host_file_result. +func_convert_path_nix_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_nix_to_cygwin + + +# func_mode_compile arg... +func_mode_compile () +{ + $opt_debug + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + pie_flag= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + test -n "$libobj" && \ + func_fatal_error "you cannot specify \`-o' more than once" + arg_mode=target + continue + ;; + + -pie | -fpie | -fPIE) + func_append pie_flag " $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) + func_append later " $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + func_append_quoted lastarg "$arg" + done + IFS="$save_ifs" + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result + + # Add the arguments to base_compile. + func_append base_compile " $lastarg" + continue + ;; + + *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + func_append_quoted base_compile "$lastarg" + done # for arg + + case $arg_mode in + arg) + func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) + func_fatal_error "you must specify a target with \`-o'" + ;; + *) + # Get the name of the library object. + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + case $libobj in + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) + func_xform "$libobj" + libobj=$func_xform_result + ;; + esac + + case $libobj in + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) + func_fatal_error "cannot determine name of library object from \`$libobj'" + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; + + -static) + build_libtool_libs=no + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + func_append removelist " $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist + func_append removelist " $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 + srcfile=$func_to_tool_file_result + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + func_mkdir_p "$xdir$objdir" + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + func_append command " -o $lobj" + fi + + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + func_append command " -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + func_append command "$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { + test "$opt_mode" = compile && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $opt_mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to build PIC objects only + -prefer-non-pic try to build non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$opt_mode'" + ;; + esac + + echo + $ECHO "Try \`$progname --help' for more information about other modes." +} + +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test "$opt_help" = :; then + func_mode_help + else + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | sed -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + sed '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $opt_dlopen; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + func_append dir "/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -* | *.la | *.lo ) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_append_quoted args "$file" + done + + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = execute && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libs= + libdirs= + admincmds= + + for opt in "$nonopt" ${1+"$@"} + do + if test -d "$opt"; then + func_append libdirs " $opt" + + elif test -f "$opt"; then + if func_lalib_unsafe_p "$opt"; then + func_append libs " $opt" + else + func_warning "\`$opt' is not a valid libtool archive" + fi + + else + func_fatal_error "invalid argument \`$opt'" + fi + done + + if test -n "$libs"; then + if test -n "$lt_sysroot"; then + sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` + sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" + else + sysroot_cmd= + fi + + # Remove sysroot references + if $opt_dry_run; then + for lib in $libs; do + echo "removing references to $lt_sysroot and \`=' prefixes from $lib" + done + else + tmpdir=`func_mktempdir` + for lib in $libs; do + sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + > $tmpdir/tmp-la + mv -f $tmpdir/tmp-la $lib + done + ${RM}r "$tmpdir" + fi + fi + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || func_append admincmds " + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo + + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." + ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + fi + exit $EXIT_SUCCESS +} + +test "$opt_mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + case $nonopt in *shtool*) :;; *) false;; esac; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + func_append install_prog "$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + no_mode=: + for arg + do + arg2= + if test -n "$dest"; then + func_append files " $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + if $install_cp; then :; else + prev=$arg + fi + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + if test "x$prev" = x-m && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false + fi + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + func_append install_prog " $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" + fi + func_append install_shared_prog " $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + func_append install_shared_prog " -m $func_quote_for_eval_result" + fi + fi + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + func_append staticlibs " $file" + ;; + + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) func_append current_libdirs " $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) func_append future_libdirs " $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + func_append dir "$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && func_append staticlibs " $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $tool_oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_to_tool_file "$progfile" func_convert_file_msys_to_w32 + func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" + $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + case $host in + *cygwin* | *mingw* | *cegcc* ) + # if an import library, we need to obtain dlname + if func_win32_import_lib_p "$dlprefile"; then + func_tr_sh "$dlprefile" + eval "curr_lafile=\$libfile_$func_tr_sh_result" + dlprefile_dlbasename="" + if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then + # Use subshell, to avoid clobbering current variable values + dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` + if test -n "$dlprefile_dlname" ; then + func_basename "$dlprefile_dlname" + dlprefile_dlbasename="$func_basename_result" + else + # no lafile. user explicitly requested -dlpreopen . + $sharedlib_from_linklib_cmd "$dlprefile" + dlprefile_dlbasename=$sharedlib_from_linklib_result + fi + fi + $opt_dry_run || { + if test -n "$dlprefile_dlbasename" ; then + eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' + else + func_warning "Could not compute DLL name from $name" + eval '$ECHO ": $name " >> "$nlist"' + fi + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + } + else # not an import lib + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + fi + ;; + *) + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + ;; + esac + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + echo >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +extern LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + echo >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) func_append symtab_cflags " $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + fi +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + +# func_cygming_dll_for_implib ARG +# +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib () +{ + $opt_debug + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` +} + +# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs +# +# The is the core of a fallback implementation of a +# platform-specific function to extract the name of the +# DLL associated with the specified import library LIBNAME. +# +# SECTION_NAME is either .idata$6 or .idata$7, depending +# on the platform and compiler that created the implib. +# +# Echos the name of the DLL associated with the +# specified import library. +func_cygming_dll_for_implib_fallback_core () +{ + $opt_debug + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` + $OBJDUMP -s --section "$1" "$2" 2>/dev/null | + $SED '/^Contents of section '"$match_literal"':/{ + # Place marker at beginning of archive member dllname section + s/.*/====MARK====/ + p + d + } + # These lines can sometimes be longer than 43 characters, but + # are always uninteresting + /:[ ]*file format pe[i]\{,1\}-/d + /^In archive [^:]*:/d + # Ensure marker is printed + /^====MARK====/p + # Remove all lines with less than 43 characters + /^.\{43\}/!d + # From remaining lines, remove first 43 characters + s/^.\{43\}//' | + $SED -n ' + # Join marker and all lines until next marker into a single line + /^====MARK====/ b para + H + $ b para + b + :para + x + s/\n//g + # Remove the marker + s/^====MARK====// + # Remove trailing dots and whitespace + s/[\. \t]*$// + # Print + /./p' | + # we now have a list, one entry per line, of the stringified + # contents of the appropriate section of all members of the + # archive which possess that section. Heuristic: eliminate + # all those which have a first or second character that is + # a '.' (that is, objdump's representation of an unprintable + # character.) This should work for all archives with less than + # 0x302f exports -- but will fail for DLLs whose name actually + # begins with a literal '.' or a single character followed by + # a '.'. + # + # Of those that remain, print the first one. + $SED -e '/^\./d;/^.\./d;q' +} + +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + +# func_cygming_dll_for_implib_fallback ARG +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# +# This fallback implementation is for use when $DLLTOOL +# does not support the --identify-strict option. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib_fallback () +{ + $opt_debug + if func_cygming_gnu_implib_p "$1" ; then + # binutils import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` + elif func_cygming_ms_implib_p "$1" ; then + # ms-generated import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` + else + # unknown + sharedlib_from_linklib_result="" + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + if test "$lock_old_archive_extraction" = yes; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test "$lock_old_archive_extraction" = yes; then + $opt_dry_run || rm -f "$lockfile" + fi + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +} + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=${1-no} + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + file=\"\$0\"" + + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi + +# Very basic option parsing. These options are (a) specific to +# the libtool wrapper, (b) are identical between the wrapper +# /script/ and the wrapper /executable/ which is used only on +# windows platforms, and (c) all begin with the string "--lt-" +# (application programs are unlikely to have options which match +# this pattern). +# +# There are only two supported options: --lt-debug and +# --lt-dump-script. There is, deliberately, no --lt-help. +# +# The first argument to this parsing function should be the +# script's $0 value, followed by "$@". +lt_option_debug= +func_parse_lt_options () +{ + lt_script_arg0=\$0 + shift + for lt_opt + do + case \"\$lt_opt\" in + --lt-debug) lt_option_debug=1 ;; + --lt-dump-script) + lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` + test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. + lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` + cat \"\$lt_dump_D/\$lt_dump_F\" + exit 0 + ;; + --lt-*) + \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 + exit 1 + ;; + esac + done + + # Print the debug banner immediately: + if test -n \"\$lt_option_debug\"; then + echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + fi +} + +# Used when --lt-debug. Prints its arguments to stdout +# (redirection is the responsibility of the caller) +func_lt_dump_args () +{ + lt_dump_args_N=1; + for lt_arg + do + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` + done +} + +# Core function for launching the target application +func_exec_program_core () +{ +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 +} + +# A function to encapsulate launching the target application +# Strips options in the --lt-* namespace from \$@ and +# launches target application with the remaining arguments. +func_exec_program () +{ + case \" \$* \" in + *\\ --lt-*) + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac + shift + done ;; + esac + func_exec_program_core \${1+\"\$@\"} +} + + # Parse options + func_parse_lt_options \"\$0\" \${1+\"\$@\"} + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + done + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # fixup the dll searchpath if we need to. + # + # Fix the DLL searchpath if we need to. Do this before prepending + # to shlibpath, because on Windows, both are PATH and uninstalled + # libraries must come first. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + + export $shlibpath_var +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + func_exec_program \${1+\"\$@\"} + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} + + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +#else +# include +# include +# ifdef __CYGWIN__ +# include +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +/* declarations of non-ANSI functions */ +#if defined(__MINGW32__) +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined(__CYGWIN__) +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined (other platforms) ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined(_MSC_VER) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +# ifndef _INTPTR_T_DEFINED +# define _INTPTR_T_DEFINED +# define intptr_t int +# endif +#elif defined(__MINGW32__) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined(__CYGWIN__) +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined (other platforms) ... */ +#endif + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +/* path handling portability macros */ +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#if defined(LT_DEBUGWRAPPER) +static int lt_debug = 1; +#else +static int lt_debug = 0; +#endif + +const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_debugprintf (const char *file, int line, const char *fmt, ...); +void lt_fatal (const char *file, int line, const char *message, ...); +static const char *nonnull (const char *s); +static const char *nonempty (const char *s); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); +EOF + + cat <= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", + nonempty (wrapper)); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + lt_debugprintf (__FILE__, __LINE__, + "checking path component for symlinks: %s\n", + tmp_pathspec); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + lt_fatal (__FILE__, __LINE__, + "error accessing file \"%s\": %s", + tmp_pathspec, nonnull (strerror (errno))); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal (__FILE__, __LINE__, + "could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +void +lt_debugprintf (const char *file, int line, const char *fmt, ...) +{ + va_list args; + if (lt_debug) + { + (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); + } +} + +static void +lt_error_core (int exit_status, const char *file, + int line, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *file, int line, const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + va_end (ap); +} + +static const char * +nonnull (const char *s) +{ + return s ? s : "(null)"; +} + +static const char * +nonempty (const char *s) +{ + return (s && !*s) ? "(empty)" : nonnull (s); +} + +void +lt_setenv (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_setenv) setting '%s' to '%s'\n", + nonnull (name), nonnull (value)); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; + + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); + + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; + + quoted_string = XMALLOC (char, length + 1); + + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; + + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; + + return new_argv; +} +EOF + ;; + esac + + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -n -e ' +s/^\(.\{79\}\)\(..*\)/\1\ +\2/ +h +s/\([\\"]\)/\\\1/g +s/$/\\n/ +s/\([^\n]*\).*/ fputs ("\1", f);/p +g +D' + cat <<"EOF" +} +EOF +} +# end: func_emit_cwrapperexe_src + +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $opt_debug + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +} + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + bindir= + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + bindir) + bindir="$arg" + prev= + continue + ;; + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + func_append dlfiles " $arg" + else + func_append dlprefiles " $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) func_append deplibs " $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# func_append moreargs " $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) func_append rpath " $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) func_append xrpath " $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + func_append weak_libs " $arg" + prev= + continue + ;; + xcclinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -bindir) + prev=bindir + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname "-L" '' "$arg" + if test -z "$func_stripname_result"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "* | *" $arg "*) + # Will only happen for absolute or sysroot arguments + ;; + *) + # Preserve sysroot, but never include relative directories + case $dir in + [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; + *) func_append deplibs " -L$dir" ;; + esac + func_append lib_search_path " $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) func_append dllsearchpath ":$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + func_append deplibs " System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + func_append deplibs " $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot|--sysroot) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) func_append new_inherited_linker_flags " $arg" ;; + esac + continue + ;; + + -multi_module) + single_module="${wl}-multi_module" + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + =*) + func_stripname '=' '' "$dir" + dir=$lt_sysroot$func_stripname_result + ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $func_quote_for_eval_result" + func_append compiler_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $wl$func_quote_for_eval_result" + func_append compiler_flags " $wl$func_quote_for_eval_result" + func_append linker_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # Flags to be passed through unchanged, with rationale: + # -64, -mips[0-9] enable 64-bit mode for the SGI compiler + # -r[0-9][0-9]* specify processor for the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler + # +DA*, +DD* enable 64-bit mode for the HP compiler + # -q* compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* architecture-specific flags for GCC + # -F/path path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + # --sysroot=* for sysroot support + # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ + -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + func_append compiler_flags " $arg" + continue + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + *.$objext) + # A standard object. + func_append objs " $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + func_append deplibs " $arg" + func_append old_deplibs " $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + func_resolve_sysroot "$arg" + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + func_append dlfiles " $func_resolve_sysroot_result" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + func_append dlprefiles " $func_resolve_sysroot_result" + prev= + else + func_append deplibs " $func_resolve_sysroot_result" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname="$func_basename_result" + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + func_to_tool_file "$output_objdir/" + tool_output_objdir=$func_to_tool_file_result + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_preserve_dup_deps ; then + case "$libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append libs " $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + esac + func_append pre_post_deps " $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) + libs="$deplibs %DEPLIBS%" + test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; + esac + fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + func_resolve_sysroot "$lib" + case $lib in + *.la) func_source "$func_resolve_sysroot_result" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + func_basename "$deplib" + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; + *) func_append deplibs " $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append compiler_flags " $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) + func_resolve_sysroot "$deplib" + lib=$func_resolve_sysroot_result + ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." + else + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + func_append newdlprefiles " $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append newdlfiles " $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + + if test "$found" = yes || test -f "$lib"; then : + else + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && func_append dlfiles " $dlopen" + test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. + func_append convenience " $ladir/$objdir/$old_library" + func_append old_convenience " $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + if test -n "$old_library" && + { test "$prefer_static_libs" = yes || + test "$prefer_static_libs,$installed" = "built,no"; }; then + linklib=$old_library + else + for l in $old_library $library_names; do + linklib="$l" + done + fi + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + func_append dlprefiles " $lib $dependency_libs" + else + func_append newdlfiles " $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir="$ladir" + fi + ;; + esac + func_basename "$lib" + laname="$func_basename_result" + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$lt_sysroot$libdir" + absdir="$lt_sysroot$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi + case "$host" in + # special handling for platforms with PE-DLLs. + *cygwin* | *mingw* | *cegcc* ) + # Linker will automatically link against shared library if both + # static and shared are present. Therefore, ensure we extract + # symbols from the import library if a shared library is present + # (otherwise, the dlopen module name will be incorrect). We do + # this by putting the import library name into $newdlprefiles. + # We recover the dlopen module name by 'saving' the la file + # name in a special purpose variable, and (later) extracting the + # dlname from the la file. + if test -n "$dlname"; then + func_tr_sh "$dir/$linklib" + eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" + func_append newdlprefiles " $dir/$linklib" + else + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + fi + ;; + * ) + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + func_append newdlprefiles " $dir/$dlname" + else + func_append newdlprefiles " $dir/$linklib" + fi + ;; + esac + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + func_append newlib_search_path " $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) func_append temp_rpath "$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + func_append notinst_deplibs " $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + func_append notinst_deplibs " $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + echo + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + x86_64-*mingw32*) + func_arith $current - $age + major=$func_arith_result + versuffix="6-$major" + ;; + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$opt_mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$absdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) func_append compile_shlibpath "$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$opt_mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + $ECHO "*** Warning: This system can not link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) func_append xrpath " $temp_xrpath";; + esac;; + *) func_append temp_deplibs " $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + func_append newlib_search_path " $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result";; + *) func_resolve_sysroot "$deplib" ;; + esac + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $func_resolve_sysroot_result "*) + func_append specialdeplibs " $func_resolve_sysroot_result" ;; + esac + fi + func_append tmp_libs " $func_resolve_sysroot_result" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + path= + case $deplib in + -L*) path="$deplib" ;; + *.la) + func_resolve_sysroot "$deplib" + deplib=$func_resolve_sysroot_result + func_dirname "$deplib" "" "." + dir=$func_dirname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of \`$dir'" + absdir="$dir" + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) + path="-L$absdir/$objdir" + ;; + esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) func_append lib_search_path " $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) func_append tmp_libs " $deplib" ;; + esac + ;; + *) func_append tmp_libs " $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + func_append tmp_libs " $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + func_append objs "$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + func_append libobjs " $objs" + fi + fi + + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + shift + IFS="$save_ifs" + + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + # correct linux to gnu/linux during the next big refactor + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|qnx|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + *) + func_fatal_configuration "$modename: unknown library version type \`$version_type'" + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current" + ;; + + irix | nonstopux) + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) # correct to gnu/linux during the next big refactor + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + func_append verstring ":${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + case $host in + x86_64-*mingw32*) + versuffix="6-$major" + ;; + *) + versuffix="-$major" + ;; + esac + ;; + + *) + func_fatal_configuration "unknown library version type \`$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + func_warning "undefined symbols not allowed in $host shared libraries" + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + fi + + func_generate_dlsyms "$libname" "$libname" "yes" + func_append libobjs " $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$opt_mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + func_append removelist " $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + func_append oldlibs " $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + func_replace_sysroot "$libdir" + func_append temp_xrpath " -R$func_replace_sysroot_result" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) func_append dlfiles " $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) func_append dlprefiles " $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + func_append deplibs " System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + func_append deplibs " -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c </dev/null` + $nocaseglob + else + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + fi + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + func_append newdeplibs " $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + done + fi + case $tmp_deplibs in + *[!\ \ ]*) + echo + if test "X$deplibs_check_method" = "Xnone"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + ;; + esac + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + deplibs="$new_libs" + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + # Remove ${wl} instances when linking with ld. + # FIXME: should test the right _cmds variable. + case $archive_cmds in + *\$LD\ *) wl= ;; + esac + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + func_replace_sysroot "$libdir" + libdir=$func_replace_sysroot_result + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append dep_rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + linknames= + for link + do + func_append linknames " $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + func_append delfiles " $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED "$sed_uncomment_deffile" $export_symbols | $SED 1q`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd1 in $cmds; do + IFS="$save_ifs" + # Take the normal branch if the nm_file_list_spec branch + # doesn't work or if tool conversion is not needed. + case $nm_file_list_spec~$to_tool_file_cmd in + *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) + try_normal_branch=yes + eval cmd=\"$cmd1\" + func_len " $cmd" + len=$func_len_result + ;; + *) + try_normal_branch=no + ;; + esac + if test "$try_normal_branch" = yes \ + && { test "$len" -lt "$max_cmd_len" \ + || test "$max_cmd_len" -le -1; } + then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + elif test -n "$nm_file_list_spec"; then + func_basename "$output" + output_la=$func_basename_result + save_libobjs=$libobjs + save_output=$output + output=${output_objdir}/${output_la}.nm + func_to_tool_file "$output" + libobjs=$nm_file_list_spec$func_to_tool_file_result + func_append delfiles " $output" + func_verbose "creating $NM input file list: $output" + for obj in $save_libobjs; do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > "$output" + eval cmd=\"$cmd1\" + func_show_eval "$cmd" 'exit $?' + output=$save_output + libobjs=$save_libobjs + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + func_append tmp_deplibs " $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + func_append linker_flags " $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + func_basename "$output" + output_la=$func_basename_result + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + echo ')' >> $output + func_append delfiles " $output" + func_to_tool_file "$output" + output=$func_to_tool_file_result + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + func_append delfiles " $output" + func_to_tool_file "$output" + output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" + else + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=" $obj" + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + func_append delfiles " $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + else + gentop="$output_objdir/${obj}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # If we're not building shared, we need to use non_pic_objs + test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" + + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" + + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + func_append compile_command " ${wl}-bind_at_load" + func_append finalize_command " ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + + func_append compile_command " $compile_deplibs" + func_append finalize_command " $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) func_append dllsearchpath ":$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) func_append finalize_perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + fi + + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi + + wrappers_required=yes + case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=no + ;; + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then + # Replace the output file specification. + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + + exit $exit_status + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + func_append rpath "$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output_objdir/$outputname" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Now create the wrapper script. + func_verbose "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save $symfileobj" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + func_append oldobjs " $symfileobj" + fi + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $addlibs + func_append oldobjs " $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append oldobjs " $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + echo "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + func_append oldobjs " $gentop/$newobj" + ;; + *) func_append oldobjs " $obj" ;; + esac + done + fi + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + elif test -n "$archiver_list_spec"; then + func_verbose "using command file archive linking..." + for obj in $oldobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > $output_objdir/$libname.libcmd + func_to_tool_file "$output_objdir/$libname.libcmd" + oldobjs=" $archiver_list_spec$func_to_tool_file_result" + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' + done + + test -n "$generated" && \ + func_show_eval "${RM}r$generated" + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + func_verbose "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name="$func_basename_result" + func_resolve_sysroot "$deplib" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" + ;; + -L*) + func_stripname -L '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -L$func_replace_sysroot_result" + ;; + -R*) + func_stripname -R '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -R$func_replace_sysroot_result" + ;; + *) func_append newdependency_libs " $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + ;; + *) func_append newdlfiles " $lib" ;; + esac + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlfiles " $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlprefiles " $abs" + done + dlprefiles="$newdlprefiles" + fi + $RM $output + # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test "x$bindir" != x ; + then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} + +{ test "$opt_mode" = link || test "$opt_mode" = relink; } && + func_mode_link ${1+"$@"} + + +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) func_append RM " $arg"; rmforce=yes ;; + -*) func_append RM " $arg" ;; + *) func_append files " $arg" ;; + esac + done + + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" + + rmdirs= + + for file in $files; do + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + odir="$objdir" + else + odir="$dir/$objdir" + fi + func_basename "$file" + name="$func_basename_result" + test "$opt_mode" = uninstall && odir="$dir" + + # Remember odir for removal later, being careful to avoid duplicates + if test "$opt_mode" = clean; then + case " $rmdirs " in + *" $odir "*) ;; + *) func_append rmdirs " $odir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then + func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + func_append rmfiles " $odir/$n" + done + test -n "$old_library" && func_append rmfiles " $odir/$old_library" + + case "$opt_mode" in + clean) + case " $library_names " in + *" $dlname "*) ;; + *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + esac + test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && + test "$pic_object" != none; then + func_append rmfiles " $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + func_append rmfiles " $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$opt_mode" = clean ; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + func_append rmfiles " $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + func_append rmfiles " $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + func_append rmfiles " $odir/$name $odir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + func_append rmfiles " $odir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + func_append rmfiles " $odir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +} + +{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && + func_mode_uninstall ${1+"$@"} + +test -z "$opt_mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$opt_mode'" + +if test -n "$exec_cmd"; then + eval exec "$exec_cmd" + exit $EXIT_FAILURE +fi + +exit $exit_status + + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: +# vi:sw=2 diff --git a/build-aux/mdate-sh b/build-aux/mdate-sh new file mode 100755 index 0000000..39f48bb --- /dev/null +++ b/build-aux/mdate-sh @@ -0,0 +1,224 @@ +#!/bin/sh +# Get modification time of a file or directory and pretty-print it. + +scriptversion=2010-08-21.06; # UTC + +# Copyright (C) 1995-2013 Free Software Foundation, Inc. +# written by Ulrich Drepper , June 1995 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +fi + +case $1 in + '') + echo "$0: No file. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: mdate-sh [--help] [--version] FILE + +Pretty-print the modification day of FILE, in the format: +1 January 1970 + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "mdate-sh $scriptversion" + exit $? + ;; +esac + +error () +{ + echo "$0: $1" >&2 + exit 1 +} + + +# Prevent date giving response in another language. +LANG=C +export LANG +LC_ALL=C +export LC_ALL +LC_TIME=C +export LC_TIME + +# GNU ls changes its time format in response to the TIME_STYLE +# variable. Since we cannot assume 'unset' works, revert this +# variable to its documented default. +if test "${TIME_STYLE+set}" = set; then + TIME_STYLE=posix-long-iso + export TIME_STYLE +fi + +save_arg1=$1 + +# Find out how to get the extended ls output of a file or directory. +if ls -L /dev/null 1>/dev/null 2>&1; then + ls_command='ls -L -l -d' +else + ls_command='ls -l -d' +fi +# Avoid user/group names that might have spaces, when possible. +if ls -n /dev/null 1>/dev/null 2>&1; then + ls_command="$ls_command -n" +fi + +# A 'ls -l' line looks as follows on OS/2. +# drwxrwx--- 0 Aug 11 2001 foo +# This differs from Unix, which adds ownership information. +# drwxrwx--- 2 root root 4096 Aug 11 2001 foo +# +# To find the date, we split the line on spaces and iterate on words +# until we find a month. This cannot work with files whose owner is a +# user named "Jan", or "Feb", etc. However, it's unlikely that '/' +# will be owned by a user whose name is a month. So we first look at +# the extended ls output of the root directory to decide how many +# words should be skipped to get the date. + +# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below. +set x`$ls_command /` + +# Find which argument is the month. +month= +command= +until test $month +do + test $# -gt 0 || error "failed parsing '$ls_command /' output" + shift + # Add another shift to the command. + command="$command shift;" + case $1 in + Jan) month=January; nummonth=1;; + Feb) month=February; nummonth=2;; + Mar) month=March; nummonth=3;; + Apr) month=April; nummonth=4;; + May) month=May; nummonth=5;; + Jun) month=June; nummonth=6;; + Jul) month=July; nummonth=7;; + Aug) month=August; nummonth=8;; + Sep) month=September; nummonth=9;; + Oct) month=October; nummonth=10;; + Nov) month=November; nummonth=11;; + Dec) month=December; nummonth=12;; + esac +done + +test -n "$month" || error "failed parsing '$ls_command /' output" + +# Get the extended ls output of the file or directory. +set dummy x`eval "$ls_command \"\\\$save_arg1\""` + +# Remove all preceding arguments +eval $command + +# Because of the dummy argument above, month is in $2. +# +# On a POSIX system, we should have +# +# $# = 5 +# $1 = file size +# $2 = month +# $3 = day +# $4 = year or time +# $5 = filename +# +# On Darwin 7.7.0 and 7.6.0, we have +# +# $# = 4 +# $1 = day +# $2 = month +# $3 = year or time +# $4 = filename + +# Get the month. +case $2 in + Jan) month=January; nummonth=1;; + Feb) month=February; nummonth=2;; + Mar) month=March; nummonth=3;; + Apr) month=April; nummonth=4;; + May) month=May; nummonth=5;; + Jun) month=June; nummonth=6;; + Jul) month=July; nummonth=7;; + Aug) month=August; nummonth=8;; + Sep) month=September; nummonth=9;; + Oct) month=October; nummonth=10;; + Nov) month=November; nummonth=11;; + Dec) month=December; nummonth=12;; +esac + +case $3 in + ???*) day=$1;; + *) day=$3; shift;; +esac + +# Here we have to deal with the problem that the ls output gives either +# the time of day or the year. +case $3 in + *:*) set `date`; eval year=\$$# + case $2 in + Jan) nummonthtod=1;; + Feb) nummonthtod=2;; + Mar) nummonthtod=3;; + Apr) nummonthtod=4;; + May) nummonthtod=5;; + Jun) nummonthtod=6;; + Jul) nummonthtod=7;; + Aug) nummonthtod=8;; + Sep) nummonthtod=9;; + Oct) nummonthtod=10;; + Nov) nummonthtod=11;; + Dec) nummonthtod=12;; + esac + # For the first six month of the year the time notation can also + # be used for files modified in the last year. + if (expr $nummonth \> $nummonthtod) > /dev/null; + then + year=`expr $year - 1` + fi;; + *) year=$3;; +esac + +# The result. +echo $day $month $year + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/build-aux/missing b/build-aux/missing new file mode 100755 index 0000000..295de3f --- /dev/null +++ b/build-aux/missing @@ -0,0 +1,215 @@ +#! /bin/sh +# Common wrapper for a few potentially missing GNU programs. + +scriptversion=2013-10-28.13; # UTC + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try '$0 --help' for more information" + exit 1 +fi + +case $1 in + + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; + + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + +Supported PROGRAM values: + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man + +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" + exit 1 + ;; + +esac + +# Run the given program, remember its exit status. +"$@"; st=$? + +# If it succeeded, we are done. +test $st -eq 0 && exit 0 + +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi + +perl_URL=https://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=https://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'autom4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/build-aux/texinfo.tex b/build-aux/texinfo.tex new file mode 100644 index 0000000..b1f0d2e --- /dev/null +++ b/build-aux/texinfo.tex @@ -0,0 +1,8638 @@ +% texinfo.tex -- TeX macros to handle Texinfo files. +% +% Load plain if necessary, i.e., if running under initex. +\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi +% +\def\texinfoversion{2007-05-03.09} +% +% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, +% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, +% 2007 Free Software Foundation, Inc. +% +% This texinfo.tex file is free software; you can redistribute it and/or +% modify it under the terms of the GNU General Public License as +% published by the Free Software Foundation; either version 3, or (at +% your option) any later version. +% +% This texinfo.tex file is distributed in the hope that it will be +% useful, but WITHOUT ANY WARRANTY; without even the implied warranty +% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +% General Public License for more details. +% +% You should have received a copy of the GNU General Public License +% along with this texinfo.tex file; see the file COPYING. If not, +% see . +% +% As a special exception, when this file is read by TeX when processing +% a Texinfo source document, you may use the result without +% restriction. (This has been our intent since Texinfo was invented.) +% +% Please try the latest version of texinfo.tex before submitting bug +% reports; you can get the latest version from: +% https://www.gnu.org/software/texinfo/ (the Texinfo home page), or +% ftp://tug.org/tex/texinfo.tex +% (and all CTAN mirrors, see https://www.ctan.org). +% The texinfo.tex in any given distribution could well be out +% of date, so if that's what you're using, please check. +% +% Send bug reports to bug-texinfo@gnu.org. Please include including a +% complete document in each bug report with which we can reproduce the +% problem. Patches are, of course, greatly appreciated. +% +% To process a Texinfo manual with TeX, it's most reliable to use the +% texi2dvi shell script that comes with the distribution. For a simple +% manual foo.texi, however, you can get away with this: +% tex foo.texi +% texindex foo.?? +% tex foo.texi +% tex foo.texi +% dvips foo.dvi -o # or whatever; this makes foo.ps. +% The extra TeX runs get the cross-reference information correct. +% Sometimes one run after texindex suffices, and sometimes you need more +% than two; texi2dvi does it as many times as necessary. +% +% It is possible to adapt texinfo.tex for other languages, to some +% extent. You can get the existing language-specific files from the +% full Texinfo distribution. +% +% The GNU Texinfo home page is https://www.gnu.org/software/texinfo. + + +\message{Loading texinfo [version \texinfoversion]:} + +% If in a .fmt file, print the version number +% and turn on active characters that we couldn't do earlier because +% they might have appeared in the input file name. +\everyjob{\message{[Texinfo version \texinfoversion]}% + \catcode`+=\active \catcode`\_=\active} + + +\chardef\other=12 + +% We never want plain's \outer definition of \+ in Texinfo. +% For @tex, we can use \tabalign. +\let\+ = \relax + +% Save some plain tex macros whose names we will redefine. +\let\ptexb=\b +\let\ptexbullet=\bullet +\let\ptexc=\c +\let\ptexcomma=\, +\let\ptexdot=\. +\let\ptexdots=\dots +\let\ptexend=\end +\let\ptexequiv=\equiv +\let\ptexexclam=\! +\let\ptexfootnote=\footnote +\let\ptexgtr=> +\let\ptexhat=^ +\let\ptexi=\i +\let\ptexindent=\indent +\let\ptexinsert=\insert +\let\ptexlbrace=\{ +\let\ptexless=< +\let\ptexnewwrite\newwrite +\let\ptexnoindent=\noindent +\let\ptexplus=+ +\let\ptexrbrace=\} +\let\ptexslash=\/ +\let\ptexstar=\* +\let\ptext=\t + +% If this character appears in an error message or help string, it +% starts a new line in the output. +\newlinechar = `^^J + +% Use TeX 3.0's \inputlineno to get the line number, for better error +% messages, but if we're using an old version of TeX, don't do anything. +% +\ifx\inputlineno\thisisundefined + \let\linenumber = \empty % Pre-3.0. +\else + \def\linenumber{l.\the\inputlineno:\space} +\fi + +% Set up fixed words for English if not already set. +\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi +\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi +\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi +\ifx\putwordin\undefined \gdef\putwordin{in}\fi +\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi +\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi +\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi +\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi +\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi +\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi +\ifx\putwordof\undefined \gdef\putwordof{of}\fi +\ifx\putwordon\undefined \gdef\putwordon{on}\fi +\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi +\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi +\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi +\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi +\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi +\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi +\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi +% +\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi +\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi +\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi +\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi +\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi +\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi +\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi +\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi +\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi +\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi +\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi +\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi +% +\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi +\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi +\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi +\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi +\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi + +% Since the category of space is not known, we have to be careful. +\chardef\spacecat = 10 +\def\spaceisspace{\catcode`\ =\spacecat} + +% sometimes characters are active, so we need control sequences. +\chardef\colonChar = `\: +\chardef\commaChar = `\, +\chardef\dashChar = `\- +\chardef\dotChar = `\. +\chardef\exclamChar= `\! +\chardef\lquoteChar= `\` +\chardef\questChar = `\? +\chardef\rquoteChar= `\' +\chardef\semiChar = `\; +\chardef\underChar = `\_ + +% Ignore a token. +% +\def\gobble#1{} + +% The following is used inside several \edef's. +\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname} + +% Hyphenation fixes. +\hyphenation{ + Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script + ap-pen-dix bit-map bit-maps + data-base data-bases eshell fall-ing half-way long-est man-u-script + man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm + par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces + spell-ing spell-ings + stand-alone strong-est time-stamp time-stamps which-ever white-space + wide-spread wrap-around +} + +% Margin to add to right of even pages, to left of odd pages. +\newdimen\bindingoffset +\newdimen\normaloffset +\newdimen\pagewidth \newdimen\pageheight + +% For a final copy, take out the rectangles +% that mark overfull boxes (in case you have decided +% that the text looks ok even though it passes the margin). +% +\def\finalout{\overfullrule=0pt} + +% @| inserts a changebar to the left of the current line. It should +% surround any changed text. This approach does *not* work if the +% change spans more than two lines of output. To handle that, we would +% have adopt a much more difficult approach (putting marks into the main +% vertical list for the beginning and end of each change). +% +\def\|{% + % \vadjust can only be used in horizontal mode. + \leavevmode + % + % Append this vertical mode material after the current line in the output. + \vadjust{% + % We want to insert a rule with the height and depth of the current + % leading; that is exactly what \strutbox is supposed to record. + \vskip-\baselineskip + % + % \vadjust-items are inserted at the left edge of the type. So + % the \llap here moves out into the left-hand margin. + \llap{% + % + % For a thicker or thinner bar, change the `1pt'. + \vrule height\baselineskip width1pt + % + % This is the space between the bar and the text. + \hskip 12pt + }% + }% +} + +% Sometimes it is convenient to have everything in the transcript file +% and nothing on the terminal. We don't just call \tracingall here, +% since that produces some useless output on the terminal. We also make +% some effort to order the tracing commands to reduce output in the log +% file; cf. trace.sty in LaTeX. +% +\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}% +\def\loggingall{% + \tracingstats2 + \tracingpages1 + \tracinglostchars2 % 2 gives us more in etex + \tracingparagraphs1 + \tracingoutput1 + \tracingmacros2 + \tracingrestores1 + \showboxbreadth\maxdimen \showboxdepth\maxdimen + \ifx\eTeXversion\undefined\else % etex gives us more logging + \tracingscantokens1 + \tracingifs1 + \tracinggroups1 + \tracingnesting2 + \tracingassigns1 + \fi + \tracingcommands3 % 3 gives us more in etex + \errorcontextlines16 +}% + +% add check for \lastpenalty to plain's definitions. If the last thing +% we did was a \nobreak, we don't want to insert more space. +% +\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount + \removelastskip\penalty-50\smallskip\fi\fi} +\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount + \removelastskip\penalty-100\medskip\fi\fi} +\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount + \removelastskip\penalty-200\bigskip\fi\fi} + +% For @cropmarks command. +% Do @cropmarks to get crop marks. +% +\newif\ifcropmarks +\let\cropmarks = \cropmarkstrue +% +% Dimensions to add cropmarks at corners. +% Added by P. A. MacKay, 12 Nov. 1986 +% +\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines +\newdimen\cornerlong \cornerlong=1pc +\newdimen\cornerthick \cornerthick=.3pt +\newdimen\topandbottommargin \topandbottommargin=.75in + +% Main output routine. +\chardef\PAGE = 255 +\output = {\onepageout{\pagecontents\PAGE}} + +\newbox\headlinebox +\newbox\footlinebox + +% \onepageout takes a vbox as an argument. Note that \pagecontents +% does insertions, but you have to call it yourself. +\def\onepageout#1{% + \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi + % + \ifodd\pageno \advance\hoffset by \bindingoffset + \else \advance\hoffset by -\bindingoffset\fi + % + % Do this outside of the \shipout so @code etc. will be expanded in + % the headline as they should be, not taken literally (outputting ''code). + \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}% + \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}% + % + {% + % Have to do this stuff outside the \shipout because we want it to + % take effect in \write's, yet the group defined by the \vbox ends + % before the \shipout runs. + % + \indexdummies % don't expand commands in the output. + \normalturnoffactive % \ in index entries must not stay \, e.g., if + % the page break happens to be in the middle of an example. + % We don't want .vr (or whatever) entries like this: + % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}} + % "\acronym" won't work when it's read back in; + % it needs to be + % {\code {{\tt \backslashcurfont }acronym} + \shipout\vbox{% + % Do this early so pdf references go to the beginning of the page. + \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi + % + \ifcropmarks \vbox to \outervsize\bgroup + \hsize = \outerhsize + \vskip-\topandbottommargin + \vtop to0pt{% + \line{\ewtop\hfil\ewtop}% + \nointerlineskip + \line{% + \vbox{\moveleft\cornerthick\nstop}% + \hfill + \vbox{\moveright\cornerthick\nstop}% + }% + \vss}% + \vskip\topandbottommargin + \line\bgroup + \hfil % center the page within the outer (page) hsize. + \ifodd\pageno\hskip\bindingoffset\fi + \vbox\bgroup + \fi + % + \unvbox\headlinebox + \pagebody{#1}% + \ifdim\ht\footlinebox > 0pt + % Only leave this space if the footline is nonempty. + % (We lessened \vsize for it in \oddfootingyyy.) + % The \baselineskip=24pt in plain's \makefootline has no effect. + \vskip 24pt + \unvbox\footlinebox + \fi + % + \ifcropmarks + \egroup % end of \vbox\bgroup + \hfil\egroup % end of (centering) \line\bgroup + \vskip\topandbottommargin plus1fill minus1fill + \boxmaxdepth = \cornerthick + \vbox to0pt{\vss + \line{% + \vbox{\moveleft\cornerthick\nsbot}% + \hfill + \vbox{\moveright\cornerthick\nsbot}% + }% + \nointerlineskip + \line{\ewbot\hfil\ewbot}% + }% + \egroup % \vbox from first cropmarks clause + \fi + }% end of \shipout\vbox + }% end of group with \indexdummies + \advancepageno + \ifnum\outputpenalty>-20000 \else\dosupereject\fi +} + +\newinsert\margin \dimen\margin=\maxdimen + +\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} +{\catcode`\@ =11 +\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi +% marginal hacks, juha@viisa.uucp (Juha Takala) +\ifvoid\margin\else % marginal info is present + \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi +\dimen@=\dp#1 \unvbox#1 +\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi +\ifr@ggedbottom \kern-\dimen@ \vfil \fi} +} + +% Here are the rules for the cropmarks. Note that they are +% offset so that the space between them is truly \outerhsize or \outervsize +% (P. A. MacKay, 12 November, 1986) +% +\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong} +\def\nstop{\vbox + {\hrule height\cornerthick depth\cornerlong width\cornerthick}} +\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong} +\def\nsbot{\vbox + {\hrule height\cornerlong depth\cornerthick width\cornerthick}} + +% Parse an argument, then pass it to #1. The argument is the rest of +% the input line (except we remove a trailing comment). #1 should be a +% macro which expects an ordinary undelimited TeX argument. +% +\def\parsearg{\parseargusing{}} +\def\parseargusing#1#2{% + \def\argtorun{#2}% + \begingroup + \obeylines + \spaceisspace + #1% + \parseargline\empty% Insert the \empty token, see \finishparsearg below. +} + +{\obeylines % + \gdef\parseargline#1^^M{% + \endgroup % End of the group started in \parsearg. + \argremovecomment #1\comment\ArgTerm% + }% +} + +% First remove any @comment, then any @c comment. +\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm} +\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} + +% Each occurence of `\^^M' or `\^^M' is replaced by a single space. +% +% \argremovec might leave us with trailing space, e.g., +% @end itemize @c foo +% This space token undergoes the same procedure and is eventually removed +% by \finishparsearg. +% +\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M} +\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M} +\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{% + \def\temp{#3}% + \ifx\temp\empty + % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp: + \let\temp\finishparsearg + \else + \let\temp\argcheckspaces + \fi + % Put the space token in: + \temp#1 #3\ArgTerm +} + +% If a _delimited_ argument is enclosed in braces, they get stripped; so +% to get _exactly_ the rest of the line, we had to prevent such situation. +% We prepended an \empty token at the very beginning and we expand it now, +% just before passing the control to \argtorun. +% (Similarily, we have to think about #3 of \argcheckspacesY above: it is +% either the null string, or it ends with \^^M---thus there is no danger +% that a pair of braces would be stripped. +% +% But first, we have to remove the trailing space token. +% +\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}} + +% \parseargdef\foo{...} +% is roughly equivalent to +% \def\foo{\parsearg\Xfoo} +% \def\Xfoo#1{...} +% +% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my +% favourite TeX trick. --kasal, 16nov03 + +\def\parseargdef#1{% + \expandafter \doparseargdef \csname\string#1\endcsname #1% +} +\def\doparseargdef#1#2{% + \def#2{\parsearg#1}% + \def#1##1% +} + +% Several utility definitions with active space: +{ + \obeyspaces + \gdef\obeyedspace{ } + + % Make each space character in the input produce a normal interword + % space in the output. Don't allow a line break at this space, as this + % is used only in environments like @example, where each line of input + % should produce a line of output anyway. + % + \gdef\sepspaces{\obeyspaces\let =\tie} + + % If an index command is used in an @example environment, any spaces + % therein should become regular spaces in the raw index file, not the + % expansion of \tie (\leavevmode \penalty \@M \ ). + \gdef\unsepspaces{\let =\space} +} + + +\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} + +% Define the framework for environments in texinfo.tex. It's used like this: +% +% \envdef\foo{...} +% \def\Efoo{...} +% +% It's the responsibility of \envdef to insert \begingroup before the +% actual body; @end closes the group after calling \Efoo. \envdef also +% defines \thisenv, so the current environment is known; @end checks +% whether the environment name matches. The \checkenv macro can also be +% used to check whether the current environment is the one expected. +% +% Non-false conditionals (@iftex, @ifset) don't fit into this, so they +% are not treated as enviroments; they don't open a group. (The +% implementation of @end takes care not to call \endgroup in this +% special case.) + + +% At runtime, environments start with this: +\def\startenvironment#1{\begingroup\def\thisenv{#1}} +% initialize +\let\thisenv\empty + +% ... but they get defined via ``\envdef\foo{...}'': +\long\def\envdef#1#2{\def#1{\startenvironment#1#2}} +\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}} + +% Check whether we're in the right environment: +\def\checkenv#1{% + \def\temp{#1}% + \ifx\thisenv\temp + \else + \badenverr + \fi +} + +% Evironment mismatch, #1 expected: +\def\badenverr{% + \errhelp = \EMsimple + \errmessage{This command can appear only \inenvironment\temp, + not \inenvironment\thisenv}% +} +\def\inenvironment#1{% + \ifx#1\empty + out of any environment% + \else + in environment \expandafter\string#1% + \fi +} + +% @end foo executes the definition of \Efoo. +% But first, it executes a specialized version of \checkenv +% +\parseargdef\end{% + \if 1\csname iscond.#1\endcsname + \else + % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03 + \expandafter\checkenv\csname#1\endcsname + \csname E#1\endcsname + \endgroup + \fi +} + +\newhelp\EMsimple{Press RETURN to continue.} + + +%% Simple single-character @ commands + +% @@ prints an @ +% Kludge this until the fonts are right (grr). +\def\@{{\tt\char64}} + +% This is turned off because it was never documented +% and you can use @w{...} around a quote to suppress ligatures. +%% Define @` and @' to be the same as ` and ' +%% but suppressing ligatures. +%\def\`{{`}} +%\def\'{{'}} + +% Used to generate quoted braces. +\def\mylbrace {{\tt\char123}} +\def\myrbrace {{\tt\char125}} +\let\{=\mylbrace +\let\}=\myrbrace +\begingroup + % Definitions to produce \{ and \} commands for indices, + % and @{ and @} for the aux/toc files. + \catcode`\{ = \other \catcode`\} = \other + \catcode`\[ = 1 \catcode`\] = 2 + \catcode`\! = 0 \catcode`\\ = \other + !gdef!lbracecmd[\{]% + !gdef!rbracecmd[\}]% + !gdef!lbraceatcmd[@{]% + !gdef!rbraceatcmd[@}]% +!endgroup + +% @comma{} to avoid , parsing problems. +\let\comma = , + +% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent +% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H. +\let\, = \c +\let\dotaccent = \. +\def\ringaccent#1{{\accent23 #1}} +\let\tieaccent = \t +\let\ubaraccent = \b +\let\udotaccent = \d + +% Other special characters: @questiondown @exclamdown @ordf @ordm +% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss. +\def\questiondown{?`} +\def\exclamdown{!`} +\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}} +\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}} + +% Dotless i and dotless j, used for accents. +\def\imacro{i} +\def\jmacro{j} +\def\dotless#1{% + \def\temp{#1}% + \ifx\temp\imacro \ptexi + \else\ifx\temp\jmacro \j + \else \errmessage{@dotless can be used only with i or j}% + \fi\fi +} + +% The \TeX{} logo, as in plain, but resetting the spacing so that a +% period following counts as ending a sentence. (Idea found in latex.) +% +\edef\TeX{\TeX \spacefactor=1000 } + +% @LaTeX{} logo. Not quite the same results as the definition in +% latex.ltx, since we use a different font for the raised A; it's most +% convenient for us to use an explicitly smaller font, rather than using +% the \scriptstyle font (since we don't reset \scriptstyle and +% \scriptscriptstyle). +% +\def\LaTeX{% + L\kern-.36em + {\setbox0=\hbox{T}% + \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}% + \kern-.15em + \TeX +} + +% Be sure we're in horizontal mode when doing a tie, since we make space +% equivalent to this in @example-like environments. Otherwise, a space +% at the beginning of a line will start with \penalty -- and +% since \penalty is valid in vertical mode, we'd end up putting the +% penalty on the vertical list instead of in the new paragraph. +{\catcode`@ = 11 + % Avoid using \@M directly, because that causes trouble + % if the definition is written into an index file. + \global\let\tiepenalty = \@M + \gdef\tie{\leavevmode\penalty\tiepenalty\ } +} + +% @: forces normal size whitespace following. +\def\:{\spacefactor=1000 } + +% @* forces a line break. +\def\*{\hfil\break\hbox{}\ignorespaces} + +% @/ allows a line break. +\let\/=\allowbreak + +% @. is an end-of-sentence period. +\def\.{.\spacefactor=\endofsentencespacefactor\space} + +% @! is an end-of-sentence bang. +\def\!{!\spacefactor=\endofsentencespacefactor\space} + +% @? is an end-of-sentence query. +\def\?{?\spacefactor=\endofsentencespacefactor\space} + +% @frenchspacing on|off says whether to put extra space after punctuation. +% +\def\onword{on} +\def\offword{off} +% +\parseargdef\frenchspacing{% + \def\temp{#1}% + \ifx\temp\onword \plainfrenchspacing + \else\ifx\temp\offword \plainnonfrenchspacing + \else + \errhelp = \EMsimple + \errmessage{Unknown @frenchspacing option `\temp', must be on/off}% + \fi\fi +} + +% @w prevents a word break. Without the \leavevmode, @w at the +% beginning of a paragraph, when TeX is still in vertical mode, would +% produce a whole line of output instead of starting the paragraph. +\def\w#1{\leavevmode\hbox{#1}} + +% @group ... @end group forces ... to be all on one page, by enclosing +% it in a TeX vbox. We use \vtop instead of \vbox to construct the box +% to keep its height that of a normal line. According to the rules for +% \topskip (p.114 of the TeXbook), the glue inserted is +% max (\topskip - \ht (first item), 0). If that height is large, +% therefore, no glue is inserted, and the space between the headline and +% the text is small, which looks bad. +% +% Another complication is that the group might be very large. This can +% cause the glue on the previous page to be unduly stretched, because it +% does not have much material. In this case, it's better to add an +% explicit \vfill so that the extra space is at the bottom. The +% threshold for doing this is if the group is more than \vfilllimit +% percent of a page (\vfilllimit can be changed inside of @tex). +% +\newbox\groupbox +\def\vfilllimit{0.7} +% +\envdef\group{% + \ifnum\catcode`\^^M=\active \else + \errhelp = \groupinvalidhelp + \errmessage{@group invalid in context where filling is enabled}% + \fi + \startsavinginserts + % + \setbox\groupbox = \vtop\bgroup + % Do @comment since we are called inside an environment such as + % @example, where each end-of-line in the input causes an + % end-of-line in the output. We don't want the end-of-line after + % the `@group' to put extra space in the output. Since @group + % should appear on a line by itself (according to the Texinfo + % manual), we don't worry about eating any user text. + \comment +} +% +% The \vtop produces a box with normal height and large depth; thus, TeX puts +% \baselineskip glue before it, and (when the next line of text is done) +% \lineskip glue after it. Thus, space below is not quite equal to space +% above. But it's pretty close. +\def\Egroup{% + % To get correct interline space between the last line of the group + % and the first line afterwards, we have to propagate \prevdepth. + \endgraf % Not \par, as it may have been set to \lisppar. + \global\dimen1 = \prevdepth + \egroup % End the \vtop. + % \dimen0 is the vertical size of the group's box. + \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox + % \dimen2 is how much space is left on the page (more or less). + \dimen2 = \pageheight \advance\dimen2 by -\pagetotal + % if the group doesn't fit on the current page, and it's a big big + % group, force a page break. + \ifdim \dimen0 > \dimen2 + \ifdim \pagetotal < \vfilllimit\pageheight + \page + \fi + \fi + \box\groupbox + \prevdepth = \dimen1 + \checkinserts +} +% +% TeX puts in an \escapechar (i.e., `@') at the beginning of the help +% message, so this ends up printing `@group can only ...'. +% +\newhelp\groupinvalidhelp{% +group can only be used in environments such as @example,^^J% +where each line of input produces a line of output.} + +% @need space-in-mils +% forces a page break if there is not space-in-mils remaining. + +\newdimen\mil \mil=0.001in + +% Old definition--didn't work. +%\parseargdef\need{\par % +%% This method tries to make TeX break the page naturally +%% if the depth of the box does not fit. +%{\baselineskip=0pt% +%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak +%\prevdepth=-1000pt +%}} + +\parseargdef\need{% + % Ensure vertical mode, so we don't make a big box in the middle of a + % paragraph. + \par + % + % If the @need value is less than one line space, it's useless. + \dimen0 = #1\mil + \dimen2 = \ht\strutbox + \advance\dimen2 by \dp\strutbox + \ifdim\dimen0 > \dimen2 + % + % Do a \strut just to make the height of this box be normal, so the + % normal leading is inserted relative to the preceding line. + % And a page break here is fine. + \vtop to #1\mil{\strut\vfil}% + % + % TeX does not even consider page breaks if a penalty added to the + % main vertical list is 10000 or more. But in order to see if the + % empty box we just added fits on the page, we must make it consider + % page breaks. On the other hand, we don't want to actually break the + % page after the empty box. So we use a penalty of 9999. + % + % There is an extremely small chance that TeX will actually break the + % page at this \penalty, if there are no other feasible breakpoints in + % sight. (If the user is using lots of big @group commands, which + % almost-but-not-quite fill up a page, TeX will have a hard time doing + % good page breaking, for example.) However, I could not construct an + % example where a page broke at this \penalty; if it happens in a real + % document, then we can reconsider our strategy. + \penalty9999 + % + % Back up by the size of the box, whether we did a page break or not. + \kern -#1\mil + % + % Do not allow a page break right after this kern. + \nobreak + \fi +} + +% @br forces paragraph break (and is undocumented). + +\let\br = \par + +% @page forces the start of a new page. +% +\def\page{\par\vfill\supereject} + +% @exdent text.... +% outputs text on separate line in roman font, starting at standard page margin + +% This records the amount of indent in the innermost environment. +% That's how much \exdent should take out. +\newskip\exdentamount + +% This defn is used inside fill environments such as @defun. +\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break} + +% This defn is used inside nofill environments such as @example. +\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount + \leftline{\hskip\leftskip{\rm#1}}}} + +% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current +% paragraph. For more general purposes, use the \margin insertion +% class. WHICH is `l' or `r'. +% +\newskip\inmarginspacing \inmarginspacing=1cm +\def\strutdepth{\dp\strutbox} +% +\def\doinmargin#1#2{\strut\vadjust{% + \nobreak + \kern-\strutdepth + \vtop to \strutdepth{% + \baselineskip=\strutdepth + \vss + % if you have multiple lines of stuff to put here, you'll need to + % make the vbox yourself of the appropriate size. + \ifx#1l% + \llap{\ignorespaces #2\hskip\inmarginspacing}% + \else + \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}% + \fi + \null + }% +}} +\def\inleftmargin{\doinmargin l} +\def\inrightmargin{\doinmargin r} +% +% @inmargin{TEXT [, RIGHT-TEXT]} +% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right; +% else use TEXT for both). +% +\def\inmargin#1{\parseinmargin #1,,\finish} +\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing. + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \def\lefttext{#1}% have both texts + \def\righttext{#2}% + \else + \def\lefttext{#1}% have only one text + \def\righttext{#1}% + \fi + % + \ifodd\pageno + \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin + \else + \def\temp{\inleftmargin\lefttext}% + \fi + \temp +} + +% @include file insert text of that file as input. +% +\def\include{\parseargusing\filenamecatcodes\includezzz} +\def\includezzz#1{% + \pushthisfilestack + \def\thisfile{#1}% + {% + \makevalueexpandable + \def\temp{\input #1 }% + \expandafter + }\temp + \popthisfilestack +} +\def\filenamecatcodes{% + \catcode`\\=\other + \catcode`~=\other + \catcode`^=\other + \catcode`_=\other + \catcode`|=\other + \catcode`<=\other + \catcode`>=\other + \catcode`+=\other + \catcode`-=\other +} + +\def\pushthisfilestack{% + \expandafter\pushthisfilestackX\popthisfilestack\StackTerm +} +\def\pushthisfilestackX{% + \expandafter\pushthisfilestackY\thisfile\StackTerm +} +\def\pushthisfilestackY #1\StackTerm #2\StackTerm {% + \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}% +} + +\def\popthisfilestack{\errthisfilestackempty} +\def\errthisfilestackempty{\errmessage{Internal error: + the stack of filenames is empty.}} + +\def\thisfile{} + +% @center line +% outputs that line, centered. +% +\parseargdef\center{% + \ifhmode + \let\next\centerH + \else + \let\next\centerV + \fi + \next{\hfil \ignorespaces#1\unskip \hfil}% +} +\def\centerH#1{% + {% + \hfil\break + \advance\hsize by -\leftskip + \advance\hsize by -\rightskip + \line{#1}% + \break + }% +} +\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}} + +% @sp n outputs n lines of vertical space + +\parseargdef\sp{\vskip #1\baselineskip} + +% @comment ...line which is ignored... +% @c is the same as @comment +% @ignore ... @end ignore is another way to write a comment + +\def\comment{\begingroup \catcode`\^^M=\other% +\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other% +\commentxxx} +{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}} + +\let\c=\comment + +% @paragraphindent NCHARS +% We'll use ems for NCHARS, close enough. +% NCHARS can also be the word `asis' or `none'. +% We cannot feasibly implement @paragraphindent asis, though. +% +\def\asisword{asis} % no translation, these are keywords +\def\noneword{none} +% +\parseargdef\paragraphindent{% + \def\temp{#1}% + \ifx\temp\asisword + \else + \ifx\temp\noneword + \defaultparindent = 0pt + \else + \defaultparindent = #1em + \fi + \fi + \parindent = \defaultparindent +} + +% @exampleindent NCHARS +% We'll use ems for NCHARS like @paragraphindent. +% It seems @exampleindent asis isn't necessary, but +% I preserve it to make it similar to @paragraphindent. +\parseargdef\exampleindent{% + \def\temp{#1}% + \ifx\temp\asisword + \else + \ifx\temp\noneword + \lispnarrowing = 0pt + \else + \lispnarrowing = #1em + \fi + \fi +} + +% @firstparagraphindent WORD +% If WORD is `none', then suppress indentation of the first paragraph +% after a section heading. If WORD is `insert', then do indent at such +% paragraphs. +% +% The paragraph indentation is suppressed or not by calling +% \suppressfirstparagraphindent, which the sectioning commands do. +% We switch the definition of this back and forth according to WORD. +% By default, we suppress indentation. +% +\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent} +\def\insertword{insert} +% +\parseargdef\firstparagraphindent{% + \def\temp{#1}% + \ifx\temp\noneword + \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent + \else\ifx\temp\insertword + \let\suppressfirstparagraphindent = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @firstparagraphindent option `\temp'}% + \fi\fi +} + +% Here is how we actually suppress indentation. Redefine \everypar to +% \kern backwards by \parindent, and then reset itself to empty. +% +% We also make \indent itself not actually do anything until the next +% paragraph. +% +\gdef\dosuppressfirstparagraphindent{% + \gdef\indent{% + \restorefirstparagraphindent + \indent + }% + \gdef\noindent{% + \restorefirstparagraphindent + \noindent + }% + \global\everypar = {% + \kern -\parindent + \restorefirstparagraphindent + }% +} + +\gdef\restorefirstparagraphindent{% + \global \let \indent = \ptexindent + \global \let \noindent = \ptexnoindent + \global \everypar = {}% +} + + +% @asis just yields its argument. Used with @table, for example. +% +\def\asis#1{#1} + +% @math outputs its argument in math mode. +% +% One complication: _ usually means subscripts, but it could also mean +% an actual _ character, as in @math{@var{some_variable} + 1}. So make +% _ active, and distinguish by seeing if the current family is \slfam, +% which is what @var uses. +{ + \catcode`\_ = \active + \gdef\mathunderscore{% + \catcode`\_=\active + \def_{\ifnum\fam=\slfam \_\else\sb\fi}% + } +} +% Another complication: we want \\ (and @\) to output a \ character. +% FYI, plain.tex uses \\ as a temporary control sequence (why?), but +% this is not advertised and we don't care. Texinfo does not +% otherwise define @\. +% +% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\. +\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi} +% +\def\math{% + \tex + \mathunderscore + \let\\ = \mathbackslash + \mathactive + $\finishmath +} +\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. + +% Some active characters (such as <) are spaced differently in math. +% We have to reset their definitions in case the @math was an argument +% to a command which sets the catcodes (such as @item or @section). +% +{ + \catcode`^ = \active + \catcode`< = \active + \catcode`> = \active + \catcode`+ = \active + \gdef\mathactive{% + \let^ = \ptexhat + \let< = \ptexless + \let> = \ptexgtr + \let+ = \ptexplus + } +} + +% @bullet and @minus need the same treatment as @math, just above. +\def\bullet{$\ptexbullet$} +\def\minus{$-$} + +% @dots{} outputs an ellipsis using the current font. +% We do .5em per period so that it has the same spacing in the cm +% typewriter fonts as three actual period characters; on the other hand, +% in other typewriter fonts three periods are wider than 1.5em. So do +% whichever is larger. +% +\def\dots{% + \leavevmode + \setbox0=\hbox{...}% get width of three periods + \ifdim\wd0 > 1.5em + \dimen0 = \wd0 + \else + \dimen0 = 1.5em + \fi + \hbox to \dimen0{% + \hskip 0pt plus.25fil + .\hskip 0pt plus1fil + .\hskip 0pt plus1fil + .\hskip 0pt plus.5fil + }% +} + +% @enddots{} is an end-of-sentence ellipsis. +% +\def\enddots{% + \dots + \spacefactor=\endofsentencespacefactor +} + +% @comma{} is so commas can be inserted into text without messing up +% Texinfo's parsing. +% +\let\comma = , + +% @refill is a no-op. +\let\refill=\relax + +% If working on a large document in chapters, it is convenient to +% be able to disable indexing, cross-referencing, and contents, for test runs. +% This is done with @novalidate (before @setfilename). +% +\newif\iflinks \linkstrue % by default we want the aux files. +\let\novalidate = \linksfalse + +% @setfilename is done at the beginning of every texinfo file. +% So open here the files we need to have open while reading the input. +% This makes it possible to make a .fmt file for texinfo. +\def\setfilename{% + \fixbackslash % Turn off hack to swallow `\input texinfo'. + \iflinks + \tryauxfile + % Open the new aux file. TeX will close it automatically at exit. + \immediate\openout\auxfile=\jobname.aux + \fi % \openindices needs to do some work in any case. + \openindices + \let\setfilename=\comment % Ignore extra @setfilename cmds. + % + % If texinfo.cnf is present on the system, read it. + % Useful for site-wide @afourpaper, etc. + \openin 1 texinfo.cnf + \ifeof 1 \else \input texinfo.cnf \fi + \closein 1 + % + \comment % Ignore the actual filename. +} + +% Called from \setfilename. +% +\def\openindices{% + \newindex{cp}% + \newcodeindex{fn}% + \newcodeindex{vr}% + \newcodeindex{tp}% + \newcodeindex{ky}% + \newcodeindex{pg}% +} + +% @bye. +\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} + + +\message{pdf,} +% adobe `portable' document format +\newcount\tempnum +\newcount\lnkcount +\newtoks\filename +\newcount\filenamelength +\newcount\pgn +\newtoks\toksA +\newtoks\toksB +\newtoks\toksC +\newtoks\toksD +\newbox\boxA +\newcount\countA +\newif\ifpdf +\newif\ifpdfmakepagedest + +% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1 +% can be set). So we test for \relax and 0 as well as \undefined, +% borrowed from ifpdf.sty. +\ifx\pdfoutput\undefined +\else + \ifx\pdfoutput\relax + \else + \ifcase\pdfoutput + \else + \pdftrue + \fi + \fi +\fi + +% PDF uses PostScript string constants for the names of xref targets, +% for display in the outlines, and in other places. Thus, we have to +% double any backslashes. Otherwise, a name like "\node" will be +% interpreted as a newline (\n), followed by o, d, e. Not good. +% https://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html +% (and related messages, the final outcome is that it is up to the TeX +% user to double the backslashes and otherwise make the string valid, so +% that's what we do). + +% double active backslashes. +% +{\catcode`\@=0 \catcode`\\=\active + @gdef@activebackslashdouble{% + @catcode`@\=@active + @let\=@doublebackslash} +} + +% To handle parens, we must adopt a different approach, since parens are +% not active characters. hyperref.dtx (which has the same problem as +% us) handles it with this amazing macro to replace tokens, with minor +% changes for Texinfo. It is included here under the GPL by permission +% from the author, Heiko Oberdiek. +% +% #1 is the tokens to replace. +% #2 is the replacement. +% #3 is the control sequence with the string. +% +\def\HyPsdSubst#1#2#3{% + \def\HyPsdReplace##1#1##2\END{% + ##1% + \ifx\\##2\\% + \else + #2% + \HyReturnAfterFi{% + \HyPsdReplace##2\END + }% + \fi + }% + \xdef#3{\expandafter\HyPsdReplace#3#1\END}% +} +\long\def\HyReturnAfterFi#1\fi{\fi#1} + +% #1 is a control sequence in which to do the replacements. +\def\backslashparens#1{% + \xdef#1{#1}% redefine it as its expansion; the definition is simply + % \lastnode when called from \setref -> \pdfmkdest. + \HyPsdSubst{(}{\realbackslash(}{#1}% + \HyPsdSubst{)}{\realbackslash)}{#1}% +} + +\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images +with PDF output, and none of those formats could be found. (.eps cannot +be supported due to the design of the PDF format; use regular TeX (DVI +output) for that.)} + +\ifpdf + \input pdfcolor + \pdfcatalog{/PageMode /UseOutlines} + % + % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto). + \def\dopdfimage#1#2#3{% + \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}% + \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}% + % + % pdftex (and the PDF format) support .png, .jpg, .pdf (among + % others). Let's try in that order. + \let\pdfimgext=\empty + \begingroup + \openin 1 #1.png \ifeof 1 + \openin 1 #1.jpg \ifeof 1 + \openin 1 #1.jpeg \ifeof 1 + \openin 1 #1.JPG \ifeof 1 + \openin 1 #1.pdf \ifeof 1 + \errhelp = \nopdfimagehelp + \errmessage{Could not find image file #1 for pdf}% + \else \gdef\pdfimgext{pdf}% + \fi + \else \gdef\pdfimgext{JPG}% + \fi + \else \gdef\pdfimgext{jpeg}% + \fi + \else \gdef\pdfimgext{jpg}% + \fi + \else \gdef\pdfimgext{png}% + \fi + \closein 1 + \endgroup + % + % without \immediate, pdftex seg faults when the same image is + % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.) + \ifnum\pdftexversion < 14 + \immediate\pdfimage + \else + \immediate\pdfximage + \fi + \ifdim \wd0 >0pt width \imagewidth \fi + \ifdim \wd2 >0pt height \imageheight \fi + \ifnum\pdftexversion<13 + #1.\pdfimgext + \else + {#1.\pdfimgext}% + \fi + \ifnum\pdftexversion < 14 \else + \pdfrefximage \pdflastximage + \fi} + % + \def\pdfmkdest#1{{% + % We have to set dummies so commands such as @code, and characters + % such as \, aren't expanded when present in a section title. + \indexnofonts + \turnoffactive + \activebackslashdouble + \makevalueexpandable + \def\pdfdestname{#1}% + \backslashparens\pdfdestname + \safewhatsit{\pdfdest name{\pdfdestname} xyz}% + }} + % + % used to mark target names; must be expandable. + \def\pdfmkpgn#1{#1} + % + % by default, use a color that is dark enough to print on paper as + % nearly black, but still distinguishable for online viewing. + % (Defined in pdfcolor.tex.) + \let\urlcolor = \BrickRed + \let\linkcolor = \BrickRed + \def\endlink{\Black\pdfendlink} + % + % Adding outlines to PDF; macros for calculating structure of outlines + % come from Petr Olsak + \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% + \else \csname#1\endcsname \fi} + \def\advancenumber#1{\tempnum=\expnumber{#1}\relax + \advance\tempnum by 1 + \expandafter\xdef\csname#1\endcsname{\the\tempnum}} + % + % #1 is the section text, which is what will be displayed in the + % outline by the pdf viewer. #2 is the pdf expression for the number + % of subentries (or empty, for subsubsections). #3 is the node text, + % which might be empty if this toc entry had no corresponding node. + % #4 is the page number + % + \def\dopdfoutline#1#2#3#4{% + % Generate a link to the node text if that exists; else, use the + % page number. We could generate a destination for the section + % text in the case where a section has no node, but it doesn't + % seem worth the trouble, since most documents are normally structured. + \def\pdfoutlinedest{#3}% + \ifx\pdfoutlinedest\empty + \def\pdfoutlinedest{#4}% + \else + % Doubled backslashes in the name. + {\activebackslashdouble \xdef\pdfoutlinedest{#3}% + \backslashparens\pdfoutlinedest}% + \fi + % + % Also double the backslashes in the display string. + {\activebackslashdouble \xdef\pdfoutlinetext{#1}% + \backslashparens\pdfoutlinetext}% + % + \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}% + } + % + \def\pdfmakeoutlines{% + \begingroup + % Thanh's hack / proper braces in bookmarks + \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace + \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace + % + % Read toc silently, to get counts of subentries for \pdfoutline. + \def\numchapentry##1##2##3##4{% + \def\thischapnum{##2}% + \def\thissecnum{0}% + \def\thissubsecnum{0}% + }% + \def\numsecentry##1##2##3##4{% + \advancenumber{chap\thischapnum}% + \def\thissecnum{##2}% + \def\thissubsecnum{0}% + }% + \def\numsubsecentry##1##2##3##4{% + \advancenumber{sec\thissecnum}% + \def\thissubsecnum{##2}% + }% + \def\numsubsubsecentry##1##2##3##4{% + \advancenumber{subsec\thissubsecnum}% + }% + \def\thischapnum{0}% + \def\thissecnum{0}% + \def\thissubsecnum{0}% + % + % use \def rather than \let here because we redefine \chapentry et + % al. a second time, below. + \def\appentry{\numchapentry}% + \def\appsecentry{\numsecentry}% + \def\appsubsecentry{\numsubsecentry}% + \def\appsubsubsecentry{\numsubsubsecentry}% + \def\unnchapentry{\numchapentry}% + \def\unnsecentry{\numsecentry}% + \def\unnsubsecentry{\numsubsecentry}% + \def\unnsubsubsecentry{\numsubsubsecentry}% + \readdatafile{toc}% + % + % Read toc second time, this time actually producing the outlines. + % The `-' means take the \expnumber as the absolute number of + % subentries, which we calculated on our first read of the .toc above. + % + % We use the node names as the destinations. + \def\numchapentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}% + \def\numsecentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}% + \def\numsubsecentry##1##2##3##4{% + \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}% + \def\numsubsubsecentry##1##2##3##4{% count is always zero + \dopdfoutline{##1}{}{##3}{##4}}% + % + % PDF outlines are displayed using system fonts, instead of + % document fonts. Therefore we cannot use special characters, + % since the encoding is unknown. For example, the eogonek from + % Latin 2 (0xea) gets translated to a | character. Info from + % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100. + % + % xx to do this right, we have to translate 8-bit characters to + % their "best" equivalent, based on the @documentencoding. Right + % now, I guess we'll just let the pdf reader have its way. + \indexnofonts + \setupdatafile + \catcode`\\=\active \otherbackslash + \input \jobname.toc + \endgroup + } + % + \def\skipspaces#1{\def\PP{#1}\def\D{|}% + \ifx\PP\D\let\nextsp\relax + \else\let\nextsp\skipspaces + \ifx\p\space\else\addtokens{\filename}{\PP}% + \advance\filenamelength by 1 + \fi + \fi + \nextsp} + \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax} + \ifnum\pdftexversion < 14 + \let \startlink \pdfannotlink + \else + \let \startlink \pdfstartlink + \fi + % make a live url in pdf output. + \def\pdfurl#1{% + \begingroup + % it seems we really need yet another set of dummies; have not + % tried to figure out what each command should do in the context + % of @url. for now, just make @/ a no-op, that's the only one + % people have actually reported a problem with. + % + \normalturnoffactive + \def\@{@}% + \let\/=\empty + \makevalueexpandable + \leavevmode\urlcolor + \startlink attr{/Border [0 0 0]}% + user{/Subtype /Link /A << /S /URI /URI (#1) >>}% + \endgroup} + \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}} + \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} + \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks} + \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}} + \def\maketoks{% + \expandafter\poptoks\the\toksA|ENDTOKS|\relax + \ifx\first0\adn0 + \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3 + \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6 + \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9 + \else + \ifnum0=\countA\else\makelink\fi + \ifx\first.\let\next=\done\else + \let\next=\maketoks + \addtokens{\toksB}{\the\toksD} + \ifx\first,\addtokens{\toksB}{\space}\fi + \fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \next} + \def\makelink{\addtokens{\toksB}% + {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} + \def\pdflink#1{% + \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}} + \linkcolor #1\endlink} + \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} +\else + \let\pdfmkdest = \gobble + \let\pdfurl = \gobble + \let\endlink = \relax + \let\linkcolor = \relax + \let\pdfmakeoutlines = \relax +\fi % \ifx\pdfoutput + + +\message{fonts,} + +% Change the current font style to #1, remembering it in \curfontstyle. +% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in +% italics, not bold italics. +% +\def\setfontstyle#1{% + \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd. + \csname ten#1\endcsname % change the current font +} + +% Select #1 fonts with the current style. +% +\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname} + +\def\rm{\fam=0 \setfontstyle{rm}} +\def\it{\fam=\itfam \setfontstyle{it}} +\def\sl{\fam=\slfam \setfontstyle{sl}} +\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} +\def\tt{\fam=\ttfam \setfontstyle{tt}} + +% Texinfo sort of supports the sans serif font style, which plain TeX does not. +% So we set up a \sf. +\newfam\sffam +\def\sf{\fam=\sffam \setfontstyle{sf}} +\let\li = \sf % Sometimes we call it \li, not \sf. + +% We don't need math for this font style. +\def\ttsl{\setfontstyle{ttsl}} + + +% Default leading. +\newdimen\textleading \textleading = 13.2pt + +% Set the baselineskip to #1, and the lineskip and strut size +% correspondingly. There is no deep meaning behind these magic numbers +% used as factors; they just match (closely enough) what Knuth defined. +% +\def\lineskipfactor{.08333} +\def\strutheightpercent{.70833} +\def\strutdepthpercent {.29167} +% +\def\setleading#1{% + \normalbaselineskip = #1\relax + \normallineskip = \lineskipfactor\normalbaselineskip + \normalbaselines + \setbox\strutbox =\hbox{% + \vrule width0pt height\strutheightpercent\baselineskip + depth \strutdepthpercent \baselineskip + }% +} + +% +% PDF CMaps. See also LaTeX's t1.cmap. +% +% \cmapOT1 +\ifpdf + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1-0) +%%Title: (TeX-OT1-0 TeX OT1 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1) +/Supplement 0 +>> def +/CMapName /TeX-OT1-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +8 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<23> <26> <0023> +<28> <3B> <0028> +<3F> <5B> <003F> +<5D> <5E> <005D> +<61> <7A> <0061> +<7B> <7C> <2013> +endbfrange +40 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <00660066> +<0C> <00660069> +<0D> <0066006C> +<0E> <006600660069> +<0F> <00660066006C> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<21> <0021> +<22> <201D> +<27> <2019> +<3C> <00A1> +<3D> <003D> +<3E> <00BF> +<5C> <201C> +<5F> <02D9> +<60> <2018> +<7D> <02DD> +<7E> <007E> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +% +% \cmapOT1IT + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1IT-0) +%%Title: (TeX-OT1IT-0 TeX OT1IT 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1IT) +/Supplement 0 +>> def +/CMapName /TeX-OT1IT-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +8 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<25> <26> <0025> +<28> <3B> <0028> +<3F> <5B> <003F> +<5D> <5E> <005D> +<61> <7A> <0061> +<7B> <7C> <2013> +endbfrange +42 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <00660066> +<0C> <00660069> +<0D> <0066006C> +<0E> <006600660069> +<0F> <00660066006C> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<21> <0021> +<22> <201D> +<23> <0023> +<24> <00A3> +<27> <2019> +<3C> <00A1> +<3D> <003D> +<3E> <00BF> +<5C> <201C> +<5F> <02D9> +<60> <2018> +<7D> <02DD> +<7E> <007E> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1IT\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +% +% \cmapOT1TT + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1TT-0) +%%Title: (TeX-OT1TT-0 TeX OT1TT 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1TT) +/Supplement 0 +>> def +/CMapName /TeX-OT1TT-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +5 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<21> <26> <0021> +<28> <5F> <0028> +<61> <7E> <0061> +endbfrange +32 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <2191> +<0C> <2193> +<0D> <0027> +<0E> <00A1> +<0F> <00BF> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<20> <2423> +<27> <2019> +<60> <2018> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1TT\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +\else + \expandafter\let\csname cmapOT1\endcsname\gobble + \expandafter\let\csname cmapOT1IT\endcsname\gobble + \expandafter\let\csname cmapOT1TT\endcsname\gobble +\fi + + +% Set the font macro #1 to the font named #2, adding on the +% specified font prefix (normally `cm'). +% #3 is the font's design size, #4 is a scale factor, #5 is the CMap +% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass +% empty to omit). +\def\setfont#1#2#3#4#5{% + \font#1=\fontprefix#2#3 scaled #4 + \csname cmap#5\endcsname#1% +} +% This is what gets called when #5 of \setfont is empty. +\let\cmap\gobble + + +% Use cm as the default font prefix. +% To specify the font prefix, you must define \fontprefix +% before you read in texinfo.tex. +\ifx\fontprefix\undefined +\def\fontprefix{cm} +\fi +% Support font families that don't use the same naming scheme as CM. +\def\rmshape{r} +\def\rmbshape{bx} %where the normal face is bold +\def\bfshape{b} +\def\bxshape{bx} +\def\ttshape{tt} +\def\ttbshape{tt} +\def\ttslshape{sltt} +\def\itshape{ti} +\def\itbshape{bxti} +\def\slshape{sl} +\def\slbshape{bxsl} +\def\sfshape{ss} +\def\sfbshape{ss} +\def\scshape{csc} +\def\scbshape{csc} + +% Definitions for a main text size of 11pt. This is the default in +% Texinfo. +% +\def\definetextfontsizexi{% +% Text fonts (11.2pt, magstep1). +\def\textnominalsize{11pt} +\edef\mainmagstep{\magstephalf} +\setfont\textrm\rmshape{10}{\mainmagstep}{OT1} +\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT} +\setfont\textbf\bfshape{10}{\mainmagstep}{OT1} +\setfont\textit\itshape{10}{\mainmagstep}{OT1IT} +\setfont\textsl\slshape{10}{\mainmagstep}{OT1} +\setfont\textsf\sfshape{10}{\mainmagstep}{OT1} +\setfont\textsc\scshape{10}{\mainmagstep}{OT1} +\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT} +\font\texti=cmmi10 scaled \mainmagstep +\font\textsy=cmsy10 scaled \mainmagstep + +% A few fonts for @defun names and args. +\setfont\defbf\bfshape{10}{\magstep1}{OT1} +\setfont\deftt\ttshape{10}{\magstep1}{OT1TT} +\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} + +% Fonts for indices, footnotes, small examples (9pt). +\def\smallnominalsize{9pt} +\setfont\smallrm\rmshape{9}{1000}{OT1} +\setfont\smalltt\ttshape{9}{1000}{OT1TT} +\setfont\smallbf\bfshape{10}{900}{OT1} +\setfont\smallit\itshape{9}{1000}{OT1IT} +\setfont\smallsl\slshape{9}{1000}{OT1} +\setfont\smallsf\sfshape{9}{1000}{OT1} +\setfont\smallsc\scshape{10}{900}{OT1} +\setfont\smallttsl\ttslshape{10}{900}{OT1TT} +\font\smalli=cmmi9 +\font\smallsy=cmsy9 + +% Fonts for small examples (8pt). +\def\smallernominalsize{8pt} +\setfont\smallerrm\rmshape{8}{1000}{OT1} +\setfont\smallertt\ttshape{8}{1000}{OT1TT} +\setfont\smallerbf\bfshape{10}{800}{OT1} +\setfont\smallerit\itshape{8}{1000}{OT1IT} +\setfont\smallersl\slshape{8}{1000}{OT1} +\setfont\smallersf\sfshape{8}{1000}{OT1} +\setfont\smallersc\scshape{10}{800}{OT1} +\setfont\smallerttsl\ttslshape{10}{800}{OT1TT} +\font\smalleri=cmmi8 +\font\smallersy=cmsy8 + +% Fonts for title page (20.4pt): +\def\titlenominalsize{20pt} +\setfont\titlerm\rmbshape{12}{\magstep3}{OT1} +\setfont\titleit\itbshape{10}{\magstep4}{OT1IT} +\setfont\titlesl\slbshape{10}{\magstep4}{OT1} +\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT} +\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT} +\setfont\titlesf\sfbshape{17}{\magstep1}{OT1} +\let\titlebf=\titlerm +\setfont\titlesc\scbshape{10}{\magstep4}{OT1} +\font\titlei=cmmi12 scaled \magstep3 +\font\titlesy=cmsy10 scaled \magstep4 +\def\authorrm{\secrm} +\def\authortt{\sectt} + +% Chapter (and unnumbered) fonts (17.28pt). +\def\chapnominalsize{17pt} +\setfont\chaprm\rmbshape{12}{\magstep2}{OT1} +\setfont\chapit\itbshape{10}{\magstep3}{OT1IT} +\setfont\chapsl\slbshape{10}{\magstep3}{OT1} +\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT} +\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT} +\setfont\chapsf\sfbshape{17}{1000}{OT1} +\let\chapbf=\chaprm +\setfont\chapsc\scbshape{10}{\magstep3}{OT1} +\font\chapi=cmmi12 scaled \magstep2 +\font\chapsy=cmsy10 scaled \magstep3 + +% Section fonts (14.4pt). +\def\secnominalsize{14pt} +\setfont\secrm\rmbshape{12}{\magstep1}{OT1} +\setfont\secit\itbshape{10}{\magstep2}{OT1IT} +\setfont\secsl\slbshape{10}{\magstep2}{OT1} +\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT} +\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT} +\setfont\secsf\sfbshape{12}{\magstep1}{OT1} +\let\secbf\secrm +\setfont\secsc\scbshape{10}{\magstep2}{OT1} +\font\seci=cmmi12 scaled \magstep1 +\font\secsy=cmsy10 scaled \magstep2 + +% Subsection fonts (13.15pt). +\def\ssecnominalsize{13pt} +\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1} +\setfont\ssecit\itbshape{10}{1315}{OT1IT} +\setfont\ssecsl\slbshape{10}{1315}{OT1} +\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT} +\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT} +\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1} +\let\ssecbf\ssecrm +\setfont\ssecsc\scbshape{10}{1315}{OT1} +\font\sseci=cmmi12 scaled \magstephalf +\font\ssecsy=cmsy10 scaled 1315 + +% Reduced fonts for @acro in text (10pt). +\def\reducednominalsize{10pt} +\setfont\reducedrm\rmshape{10}{1000}{OT1} +\setfont\reducedtt\ttshape{10}{1000}{OT1TT} +\setfont\reducedbf\bfshape{10}{1000}{OT1} +\setfont\reducedit\itshape{10}{1000}{OT1IT} +\setfont\reducedsl\slshape{10}{1000}{OT1} +\setfont\reducedsf\sfshape{10}{1000}{OT1} +\setfont\reducedsc\scshape{10}{1000}{OT1} +\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT} +\font\reducedi=cmmi10 +\font\reducedsy=cmsy10 + +% reset the current fonts +\textfonts +\rm +} % end of 11pt text font size definitions + + +% Definitions to make the main text be 10pt Computer Modern, with +% section, chapter, etc., sizes following suit. This is for the GNU +% Press printing of the Emacs 22 manual. Maybe other manuals in the +% future. Used with @smallbook, which sets the leading to 12pt. +% +\def\definetextfontsizex{% +% Text fonts (10pt). +\def\textnominalsize{10pt} +\edef\mainmagstep{1000} +\setfont\textrm\rmshape{10}{\mainmagstep}{OT1} +\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT} +\setfont\textbf\bfshape{10}{\mainmagstep}{OT1} +\setfont\textit\itshape{10}{\mainmagstep}{OT1IT} +\setfont\textsl\slshape{10}{\mainmagstep}{OT1} +\setfont\textsf\sfshape{10}{\mainmagstep}{OT1} +\setfont\textsc\scshape{10}{\mainmagstep}{OT1} +\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT} +\font\texti=cmmi10 scaled \mainmagstep +\font\textsy=cmsy10 scaled \mainmagstep + +% A few fonts for @defun names and args. +\setfont\defbf\bfshape{10}{\magstephalf}{OT1} +\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT} +\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} + +% Fonts for indices, footnotes, small examples (9pt). +\def\smallnominalsize{9pt} +\setfont\smallrm\rmshape{9}{1000}{OT1} +\setfont\smalltt\ttshape{9}{1000}{OT1TT} +\setfont\smallbf\bfshape{10}{900}{OT1} +\setfont\smallit\itshape{9}{1000}{OT1IT} +\setfont\smallsl\slshape{9}{1000}{OT1} +\setfont\smallsf\sfshape{9}{1000}{OT1} +\setfont\smallsc\scshape{10}{900}{OT1} +\setfont\smallttsl\ttslshape{10}{900}{OT1TT} +\font\smalli=cmmi9 +\font\smallsy=cmsy9 + +% Fonts for small examples (8pt). +\def\smallernominalsize{8pt} +\setfont\smallerrm\rmshape{8}{1000}{OT1} +\setfont\smallertt\ttshape{8}{1000}{OT1TT} +\setfont\smallerbf\bfshape{10}{800}{OT1} +\setfont\smallerit\itshape{8}{1000}{OT1IT} +\setfont\smallersl\slshape{8}{1000}{OT1} +\setfont\smallersf\sfshape{8}{1000}{OT1} +\setfont\smallersc\scshape{10}{800}{OT1} +\setfont\smallerttsl\ttslshape{10}{800}{OT1TT} +\font\smalleri=cmmi8 +\font\smallersy=cmsy8 + +% Fonts for title page (20.4pt): +\def\titlenominalsize{20pt} +\setfont\titlerm\rmbshape{12}{\magstep3}{OT1} +\setfont\titleit\itbshape{10}{\magstep4}{OT1IT} +\setfont\titlesl\slbshape{10}{\magstep4}{OT1} +\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT} +\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT} +\setfont\titlesf\sfbshape{17}{\magstep1}{OT1} +\let\titlebf=\titlerm +\setfont\titlesc\scbshape{10}{\magstep4}{OT1} +\font\titlei=cmmi12 scaled \magstep3 +\font\titlesy=cmsy10 scaled \magstep4 +\def\authorrm{\secrm} +\def\authortt{\sectt} + +% Chapter fonts (14.4pt). +\def\chapnominalsize{14pt} +\setfont\chaprm\rmbshape{12}{\magstep1}{OT1} +\setfont\chapit\itbshape{10}{\magstep2}{OT1IT} +\setfont\chapsl\slbshape{10}{\magstep2}{OT1} +\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT} +\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT} +\setfont\chapsf\sfbshape{12}{\magstep1}{OT1} +\let\chapbf\chaprm +\setfont\chapsc\scbshape{10}{\magstep2}{OT1} +\font\chapi=cmmi12 scaled \magstep1 +\font\chapsy=cmsy10 scaled \magstep2 + +% Section fonts (12pt). +\def\secnominalsize{12pt} +\setfont\secrm\rmbshape{12}{1000}{OT1} +\setfont\secit\itbshape{10}{\magstep1}{OT1IT} +\setfont\secsl\slbshape{10}{\magstep1}{OT1} +\setfont\sectt\ttbshape{12}{1000}{OT1TT} +\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT} +\setfont\secsf\sfbshape{12}{1000}{OT1} +\let\secbf\secrm +\setfont\secsc\scbshape{10}{\magstep1}{OT1} +\font\seci=cmmi12 +\font\secsy=cmsy10 scaled \magstep1 + +% Subsection fonts (10pt). +\def\ssecnominalsize{10pt} +\setfont\ssecrm\rmbshape{10}{1000}{OT1} +\setfont\ssecit\itbshape{10}{1000}{OT1IT} +\setfont\ssecsl\slbshape{10}{1000}{OT1} +\setfont\ssectt\ttbshape{10}{1000}{OT1TT} +\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT} +\setfont\ssecsf\sfbshape{10}{1000}{OT1} +\let\ssecbf\ssecrm +\setfont\ssecsc\scbshape{10}{1000}{OT1} +\font\sseci=cmmi10 +\font\ssecsy=cmsy10 + +% Reduced fonts for @acro in text (9pt). +\def\reducednominalsize{9pt} +\setfont\reducedrm\rmshape{9}{1000}{OT1} +\setfont\reducedtt\ttshape{9}{1000}{OT1TT} +\setfont\reducedbf\bfshape{10}{900}{OT1} +\setfont\reducedit\itshape{9}{1000}{OT1IT} +\setfont\reducedsl\slshape{9}{1000}{OT1} +\setfont\reducedsf\sfshape{9}{1000}{OT1} +\setfont\reducedsc\scshape{10}{900}{OT1} +\setfont\reducedttsl\ttslshape{10}{900}{OT1TT} +\font\reducedi=cmmi9 +\font\reducedsy=cmsy9 + +% reduce space between paragraphs +\divide\parskip by 2 + +% reset the current fonts +\textfonts +\rm +} % end of 10pt text font size definitions + + +% We provide the user-level command +% @fonttextsize 10 +% (or 11) to redefine the text font size. pt is assumed. +% +\def\xword{10} +\def\xiword{11} +% +\parseargdef\fonttextsize{% + \def\textsizearg{#1}% + \wlog{doing @fonttextsize \textsizearg}% + % + % Set \globaldefs so that documents can use this inside @tex, since + % makeinfo 4.8 does not support it, but we need it nonetheless. + % + \begingroup \globaldefs=1 + \ifx\textsizearg\xword \definetextfontsizex + \else \ifx\textsizearg\xiword \definetextfontsizexi + \else + \errhelp=\EMsimple + \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'} + \fi\fi + \endgroup +} + + +% In order for the font changes to affect most math symbols and letters, +% we have to define the \textfont of the standard families. Since +% texinfo doesn't allow for producing subscripts and superscripts except +% in the main text, we don't bother to reset \scriptfont and +% \scriptscriptfont (which would also require loading a lot more fonts). +% +\def\resetmathfonts{% + \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy + \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf + \textfont\ttfam=\tentt \textfont\sffam=\tensf +} + +% The font-changing commands redefine the meanings of \tenSTYLE, instead +% of just \STYLE. We do this because \STYLE needs to also set the +% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire +% \tenSTYLE to set the current font. +% +% Each font-changing command also sets the names \lsize (one size lower) +% and \lllsize (three sizes lower). These relative commands are used in +% the LaTeX logo and acronyms. +% +% This all needs generalizing, badly. +% +\def\textfonts{% + \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl + \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc + \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy + \let\tenttsl=\textttsl + \def\curfontsize{text}% + \def\lsize{reduced}\def\lllsize{smaller}% + \resetmathfonts \setleading{\textleading}} +\def\titlefonts{% + \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl + \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc + \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy + \let\tenttsl=\titlettsl + \def\curfontsize{title}% + \def\lsize{chap}\def\lllsize{subsec}% + \resetmathfonts \setleading{25pt}} +\def\titlefont#1{{\titlefonts\rm #1}} +\def\chapfonts{% + \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl + \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc + \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy + \let\tenttsl=\chapttsl + \def\curfontsize{chap}% + \def\lsize{sec}\def\lllsize{text}% + \resetmathfonts \setleading{19pt}} +\def\secfonts{% + \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl + \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc + \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy + \let\tenttsl=\secttsl + \def\curfontsize{sec}% + \def\lsize{subsec}\def\lllsize{reduced}% + \resetmathfonts \setleading{16pt}} +\def\subsecfonts{% + \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl + \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc + \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy + \let\tenttsl=\ssecttsl + \def\curfontsize{ssec}% + \def\lsize{text}\def\lllsize{small}% + \resetmathfonts \setleading{15pt}} +\let\subsubsecfonts = \subsecfonts +\def\reducedfonts{% + \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl + \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc + \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy + \let\tenttsl=\reducedttsl + \def\curfontsize{reduced}% + \def\lsize{small}\def\lllsize{smaller}% + \resetmathfonts \setleading{10.5pt}} +\def\smallfonts{% + \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl + \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc + \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy + \let\tenttsl=\smallttsl + \def\curfontsize{small}% + \def\lsize{smaller}\def\lllsize{smaller}% + \resetmathfonts \setleading{10.5pt}} +\def\smallerfonts{% + \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl + \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc + \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy + \let\tenttsl=\smallerttsl + \def\curfontsize{smaller}% + \def\lsize{smaller}\def\lllsize{smaller}% + \resetmathfonts \setleading{9.5pt}} + +% Set the fonts to use with the @small... environments. +\let\smallexamplefonts = \smallfonts + +% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample +% can fit this many characters: +% 8.5x11=86 smallbook=72 a4=90 a5=69 +% If we use \scriptfonts (8pt), then we can fit this many characters: +% 8.5x11=90+ smallbook=80 a4=90+ a5=77 +% For me, subjectively, the few extra characters that fit aren't worth +% the additional smallness of 8pt. So I'm making the default 9pt. +% +% By the way, for comparison, here's what fits with @example (10pt): +% 8.5x11=71 smallbook=60 a4=75 a5=58 +% +% I wish the USA used A4 paper. +% --karl, 24jan03. + + +% Set up the default fonts, so we can use them for creating boxes. +% +\definetextfontsizexi + +% Define these so they can be easily changed for other fonts. +\def\angleleft{$\langle$} +\def\angleright{$\rangle$} + +% Count depth in font-changes, for error checks +\newcount\fontdepth \fontdepth=0 + +% Fonts for short table of contents. +\setfont\shortcontrm\rmshape{12}{1000}{OT1} +\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12 +\setfont\shortcontsl\slshape{12}{1000}{OT1} +\setfont\shortconttt\ttshape{12}{1000}{OT1TT} + +%% Add scribe-like font environments, plus @l for inline lisp (usually sans +%% serif) and @ii for TeX italic + +% \smartitalic{ARG} outputs arg in italics, followed by an italic correction +% unless the following character is such as not to need one. +\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else + \ptexslash\fi\fi\fi} +\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx} +\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx} + +% like \smartslanted except unconditionally uses \ttsl. +% @var is set to this for defun arguments. +\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx} + +% like \smartslanted except unconditionally use \sl. We never want +% ttsl for book titles, do we? +\def\cite#1{{\sl #1}\futurelet\next\smartitalicx} + +\let\i=\smartitalic +\let\slanted=\smartslanted +\let\var=\smartslanted +\let\dfn=\smartslanted +\let\emph=\smartitalic + +% @b, explicit bold. +\def\b#1{{\bf #1}} +\let\strong=\b + +% @sansserif, explicit sans. +\def\sansserif#1{{\sf #1}} + +% We can't just use \exhyphenpenalty, because that only has effect at +% the end of a paragraph. Restore normal hyphenation at the end of the +% group within which \nohyphenation is presumably called. +% +\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation} +\def\restorehyphenation{\hyphenchar\font = `- } + +% Set sfcode to normal for the chars that usually have another value. +% Can't use plain's \frenchspacing because it uses the `\x notation, and +% sometimes \x has an active definition that messes things up. +% +\catcode`@=11 + \def\plainfrenchspacing{% + \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m + \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m + \def\endofsentencespacefactor{1000}% for @. and friends + } + \def\plainnonfrenchspacing{% + \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000 + \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250 + \def\endofsentencespacefactor{3000}% for @. and friends + } +\catcode`@=\other +\def\endofsentencespacefactor{3000}% default + +\def\t#1{% + {\tt \rawbackslash \plainfrenchspacing #1}% + \null +} +\def\samp#1{`\tclose{#1}'\null} +\setfont\keyrm\rmshape{8}{1000}{OT1} +\font\keysy=cmsy9 +\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% + \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% + \vbox{\hrule\kern-0.4pt + \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% + \kern-0.4pt\hrule}% + \kern-.06em\raise0.4pt\hbox{\angleright}}}} +\def\key #1{{\nohyphenation \uppercase{#1}}\null} +% The old definition, with no lozenge: +%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null} +\def\ctrl #1{{\tt \rawbackslash \hat}#1} + +% @file, @option are the same as @samp. +\let\file=\samp +\let\option=\samp + +% @code is a modification of @t, +% which makes spaces the same size as normal in the surrounding text. +\def\tclose#1{% + {% + % Change normal interword space to be same as for the current font. + \spaceskip = \fontdimen2\font + % + % Switch to typewriter. + \tt + % + % But `\ ' produces the large typewriter interword space. + \def\ {{\spaceskip = 0pt{} }}% + % + % Turn off hyphenation. + \nohyphenation + % + \rawbackslash + \plainfrenchspacing + #1% + }% + \null +} + +% We *must* turn on hyphenation at `-' and `_' in @code. +% Otherwise, it is too hard to avoid overfull hboxes +% in the Emacs manual, the Library manual, etc. + +% Unfortunately, TeX uses one parameter (\hyphenchar) to control +% both hyphenation at - and hyphenation within words. +% We must therefore turn them both off (\tclose does that) +% and arrange explicitly to hyphenate at a dash. +% -- rms. +{ + \catcode`\-=\active \catcode`\_=\active + \catcode`\'=\active \catcode`\`=\active + % + \global\def\code{\begingroup + \catcode\rquoteChar=\active \catcode\lquoteChar=\active + \let'\codequoteright \let`\codequoteleft + % + \catcode\dashChar=\active \catcode\underChar=\active + \ifallowcodebreaks + \let-\codedash + \let_\codeunder + \else + \let-\realdash + \let_\realunder + \fi + \codex + } +} + +\def\realdash{-} +\def\codedash{-\discretionary{}{}{}} +\def\codeunder{% + % this is all so @math{@code{var_name}+1} can work. In math mode, _ + % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.) + % will therefore expand the active definition of _, which is us + % (inside @code that is), therefore an endless loop. + \ifusingtt{\ifmmode + \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_. + \else\normalunderscore \fi + \discretionary{}{}{}}% + {\_}% +} +\def\codex #1{\tclose{#1}\endgroup} + +% An additional complication: the above will allow breaks after, e.g., +% each of the four underscores in __typeof__. This is undesirable in +% some manuals, especially if they don't have long identifiers in +% general. @allowcodebreaks provides a way to control this. +% +\newif\ifallowcodebreaks \allowcodebreakstrue + +\def\keywordtrue{true} +\def\keywordfalse{false} + +\parseargdef\allowcodebreaks{% + \def\txiarg{#1}% + \ifx\txiarg\keywordtrue + \allowcodebreakstrue + \else\ifx\txiarg\keywordfalse + \allowcodebreaksfalse + \else + \errhelp = \EMsimple + \errmessage{Unknown @allowcodebreaks option `\txiarg'}% + \fi\fi +} + +% @kbd is like @code, except that if the argument is just one @key command, +% then @kbd has no effect. + +% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), +% `example' (@kbd uses ttsl only inside of @example and friends), +% or `code' (@kbd uses normal tty font always). +\parseargdef\kbdinputstyle{% + \def\txiarg{#1}% + \ifx\txiarg\worddistinct + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% + \else\ifx\txiarg\wordexample + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% + \else\ifx\txiarg\wordcode + \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% + \else + \errhelp = \EMsimple + \errmessage{Unknown @kbdinputstyle option `\txiarg'}% + \fi\fi\fi +} +\def\worddistinct{distinct} +\def\wordexample{example} +\def\wordcode{code} + +% Default is `distinct.' +\kbdinputstyle distinct + +\def\xkey{\key} +\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% +\ifx\one\xkey\ifx\threex\three \key{#2}% +\else{\tclose{\kbdfont\look}}\fi +\else{\tclose{\kbdfont\look}}\fi} + +% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. +\let\indicateurl=\code +\let\env=\code +\let\command=\code + +% @uref (abbreviation for `urlref') takes an optional (comma-separated) +% second argument specifying the text to display and an optional third +% arg as text to display instead of (rather than in addition to) the url +% itself. First (mandatory) arg is the url. Perhaps eventually put in +% a hypertex \special here. +% +\def\uref#1{\douref #1,,,\finish} +\def\douref#1,#2,#3,#4\finish{\begingroup + \unsepspaces + \pdfurl{#1}% + \setbox0 = \hbox{\ignorespaces #3}% + \ifdim\wd0 > 0pt + \unhbox0 % third arg given, show only that + \else + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \ifpdf + \unhbox0 % PDF: 2nd arg given, show only it + \else + \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url + \fi + \else + \code{#1}% only url given, so show it + \fi + \fi + \endlink +\endgroup} + +% @url synonym for @uref, since that's how everyone uses it. +% +\let\url=\uref + +% rms does not like angle brackets --karl, 17may97. +% So now @email is just like @uref, unless we are pdf. +% +%\def\email#1{\angleleft{\tt #1}\angleright} +\ifpdf + \def\email#1{\doemail#1,,\finish} + \def\doemail#1,#2,#3\finish{\begingroup + \unsepspaces + \pdfurl{mailto:#1}% + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi + \endlink + \endgroup} +\else + \let\email=\uref +\fi + +% Check if we are currently using a typewriter font. Since all the +% Computer Modern typewriter fonts have zero interword stretch (and +% shrink), and it is reasonable to expect all typewriter fonts to have +% this property, we can check that font parameter. +% +\def\ifmonospace{\ifdim\fontdimen3\font=0pt } + +% Typeset a dimension, e.g., `in' or `pt'. The only reason for the +% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. +% +\def\dmn#1{\thinspace #1} + +\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par} + +% @l was never documented to mean ``switch to the Lisp font'', +% and it is not used as such in any manual I can find. We need it for +% Polish suppressed-l. --karl, 22sep96. +%\def\l#1{{\li #1}\null} + +% Explicit font changes: @r, @sc, undocumented @ii. +\def\r#1{{\rm #1}} % roman font +\def\sc#1{{\smallcaps#1}} % smallcaps font +\def\ii#1{{\it #1}} % italic font + +% @acronym for "FBI", "NATO", and the like. +% We print this one point size smaller, since it's intended for +% all-uppercase. +% +\def\acronym#1{\doacronym #1,,\finish} +\def\doacronym#1,#2,#3\finish{% + {\selectfonts\lsize #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi +} + +% @abbr for "Comput. J." and the like. +% No font change, but don't do end-of-sentence spacing. +% +\def\abbr#1{\doabbr #1,,\finish} +\def\doabbr#1,#2,#3\finish{% + {\plainfrenchspacing #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi +} + +% @pounds{} is a sterling sign, which Knuth put in the CM italic font. +% +\def\pounds{{\it\$}} + +% @euro{} comes from a separate font, depending on the current style. +% We use the free feym* fonts from the eurosym package by Henrik +% Theiling, which support regular, slanted, bold and bold slanted (and +% "outlined" (blackboard board, sort of) versions, which we don't need). +% It is available from https://www.ctan.org/tex-archive/fonts/eurosym. +% +% Although only regular is the truly official Euro symbol, we ignore +% that. The Euro is designed to be slightly taller than the regular +% font height. +% +% feymr - regular +% feymo - slanted +% feybr - bold +% feybo - bold slanted +% +% There is no good (free) typewriter version, to my knowledge. +% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide. +% Hmm. +% +% Also doesn't work in math. Do we need to do math with euro symbols? +% Hope not. +% +% +\def\euro{{\eurofont e}} +\def\eurofont{% + % We set the font at each command, rather than predefining it in + % \textfonts and the other font-switching commands, so that + % installations which never need the symbol don't have to have the + % font installed. + % + % There is only one designed size (nominal 10pt), so we always scale + % that to the current nominal size. + % + % By the way, simply using "at 1em" works for cmr10 and the like, but + % does not work for cmbx10 and other extended/shrunken fonts. + % + \def\eurosize{\csname\curfontsize nominalsize\endcsname}% + % + \ifx\curfontstyle\bfstylename + % bold: + \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize + \else + % regular: + \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize + \fi + \thiseurofont +} + +% @registeredsymbol - R in a circle. The font for the R should really +% be smaller yet, but lllsize is the best we can do for now. +% Adapted from the plain.tex definition of \copyright. +% +\def\registeredsymbol{% + $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}% + \hfil\crcr\Orb}}% + }$% +} + +% @textdegree - the normal degrees sign. +% +\def\textdegree{$^\circ$} + +% Laurent Siebenmann reports \Orb undefined with: +% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38 +% so we'll define it if necessary. +% +\ifx\Orb\undefined +\def\Orb{\mathhexbox20D} +\fi + + +\message{page headings,} + +\newskip\titlepagetopglue \titlepagetopglue = 1.5in +\newskip\titlepagebottomglue \titlepagebottomglue = 2pc + +% First the title page. Must do @settitle before @titlepage. +\newif\ifseenauthor +\newif\iffinishedtitlepage + +% Do an implicit @contents or @shortcontents after @end titlepage if the +% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage. +% +\newif\ifsetcontentsaftertitlepage + \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue +\newif\ifsetshortcontentsaftertitlepage + \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue + +\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% + \endgroup\page\hbox{}\page} + +\envdef\titlepage{% + % Open one extra group, as we want to close it in the middle of \Etitlepage. + \begingroup + \parindent=0pt \textfonts + % Leave some space at the very top of the page. + \vglue\titlepagetopglue + % No rule at page bottom unless we print one at the top with @title. + \finishedtitlepagetrue + % + % Most title ``pages'' are actually two pages long, with space + % at the top of the second. We don't want the ragged left on the second. + \let\oldpage = \page + \def\page{% + \iffinishedtitlepage\else + \finishtitlepage + \fi + \let\page = \oldpage + \page + \null + }% +} + +\def\Etitlepage{% + \iffinishedtitlepage\else + \finishtitlepage + \fi + % It is important to do the page break before ending the group, + % because the headline and footline are only empty inside the group. + % If we use the new definition of \page, we always get a blank page + % after the title page, which we certainly don't want. + \oldpage + \endgroup + % + % Need this before the \...aftertitlepage checks so that if they are + % in effect the toc pages will come out with page numbers. + \HEADINGSon + % + % If they want short, they certainly want long too. + \ifsetshortcontentsaftertitlepage + \shortcontents + \contents + \global\let\shortcontents = \relax + \global\let\contents = \relax + \fi + % + \ifsetcontentsaftertitlepage + \contents + \global\let\contents = \relax + \global\let\shortcontents = \relax + \fi +} + +\def\finishtitlepage{% + \vskip4pt \hrule height 2pt width \hsize + \vskip\titlepagebottomglue + \finishedtitlepagetrue +} + +%%% Macros to be used within @titlepage: + +\let\subtitlerm=\tenrm +\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} + +\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines + \let\tt=\authortt} + +\parseargdef\title{% + \checkenv\titlepage + \leftline{\titlefonts\rm #1} + % print a rule at the page bottom also. + \finishedtitlepagefalse + \vskip4pt \hrule height 4pt width \hsize \vskip4pt +} + +\parseargdef\subtitle{% + \checkenv\titlepage + {\subtitlefont \rightline{#1}}% +} + +% @author should come last, but may come many times. +% It can also be used inside @quotation. +% +\parseargdef\author{% + \def\temp{\quotation}% + \ifx\thisenv\temp + \def\quotationauthor{#1}% printed in \Equotation. + \else + \checkenv\titlepage + \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi + {\authorfont \leftline{#1}}% + \fi +} + + +%%% Set up page headings and footings. + +\let\thispage=\folio + +\newtoks\evenheadline % headline on even pages +\newtoks\oddheadline % headline on odd pages +\newtoks\evenfootline % footline on even pages +\newtoks\oddfootline % footline on odd pages + +% Now make TeX use those variables +\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline + \else \the\evenheadline \fi}} +\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline + \else \the\evenfootline \fi}\HEADINGShook} +\let\HEADINGShook=\relax + +% Commands to set those variables. +% For example, this is what @headings on does +% @evenheading @thistitle|@thispage|@thischapter +% @oddheading @thischapter|@thispage|@thistitle +% @evenfooting @thisfile|| +% @oddfooting ||@thisfile + + +\def\evenheading{\parsearg\evenheadingxxx} +\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish} +\def\evenheadingyyy #1\|#2\|#3\|#4\finish{% +\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\def\oddheading{\parsearg\oddheadingxxx} +\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish} +\def\oddheadingyyy #1\|#2\|#3\|#4\finish{% +\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}% + +\def\evenfooting{\parsearg\evenfootingxxx} +\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish} +\def\evenfootingyyy #1\|#2\|#3\|#4\finish{% +\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} + +\def\oddfooting{\parsearg\oddfootingxxx} +\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish} +\def\oddfootingyyy #1\|#2\|#3\|#4\finish{% + \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}% + % + % Leave some space for the footline. Hopefully ok to assume + % @evenfooting will not be used by itself. + \global\advance\pageheight by -12pt + \global\advance\vsize by -12pt +} + +\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}} + + +% @headings double turns headings on for double-sided printing. +% @headings single turns headings on for single-sided printing. +% @headings off turns them off. +% @headings on same as @headings double, retained for compatibility. +% @headings after turns on double-sided headings after this page. +% @headings doubleafter turns on double-sided headings after this page. +% @headings singleafter turns on single-sided headings after this page. +% By default, they are off at the start of a document, +% and turned `on' after @end titlepage. + +\def\headings #1 {\csname HEADINGS#1\endcsname} + +\def\HEADINGSoff{% +\global\evenheadline={\hfil} \global\evenfootline={\hfil} +\global\oddheadline={\hfil} \global\oddfootline={\hfil}} +\HEADINGSoff +% When we turn headings on, set the page number to 1. +% For double-sided printing, put current file name in lower left corner, +% chapter name on inside top of right hand pages, document +% title on inside top of left hand pages, and page numbers on outside top +% edge of all pages. +\def\HEADINGSdouble{% +\global\pageno=1 +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\folio\hfil\thistitle}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\let\contentsalignmacro = \chapoddpage +} +\let\contentsalignmacro = \chappager + +% For single-sided printing, chapter title goes across top left of page, +% page number on top right. +\def\HEADINGSsingle{% +\global\pageno=1 +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\thischapter\hfil\folio}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\let\contentsalignmacro = \chappager +} +\def\HEADINGSon{\HEADINGSdouble} + +\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex} +\let\HEADINGSdoubleafter=\HEADINGSafter +\def\HEADINGSdoublex{% +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\folio\hfil\thistitle}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\let\contentsalignmacro = \chapoddpage +} + +\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex} +\def\HEADINGSsinglex{% +\global\evenfootline={\hfil} +\global\oddfootline={\hfil} +\global\evenheadline={\line{\thischapter\hfil\folio}} +\global\oddheadline={\line{\thischapter\hfil\folio}} +\global\let\contentsalignmacro = \chappager +} + +% Subroutines used in generating headings +% This produces Day Month Year style of output. +% Only define if not already defined, in case a txi-??.tex file has set +% up a different format (e.g., txi-cs.tex does this). +\ifx\today\undefined +\def\today{% + \number\day\space + \ifcase\month + \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr + \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug + \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec + \fi + \space\number\year} +\fi + +% @settitle line... specifies the title of the document, for headings. +% It generates no output of its own. +\def\thistitle{\putwordNoTitle} +\def\settitle{\parsearg{\gdef\thistitle}} + + +\message{tables,} +% Tables -- @table, @ftable, @vtable, @item(x). + +% default indentation of table text +\newdimen\tableindent \tableindent=.8in +% default indentation of @itemize and @enumerate text +\newdimen\itemindent \itemindent=.3in +% margin between end of table item and start of table text. +\newdimen\itemmargin \itemmargin=.1in + +% used internally for \itemindent minus \itemmargin +\newdimen\itemmax + +% Note @table, @ftable, and @vtable define @item, @itemx, etc., with +% these defs. +% They also define \itemindex +% to index the item name in whatever manner is desired (perhaps none). + +\newif\ifitemxneedsnegativevskip + +\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi} + +\def\internalBitem{\smallbreak \parsearg\itemzzz} +\def\internalBitemx{\itemxpar \parsearg\itemzzz} + +\def\itemzzz #1{\begingroup % + \advance\hsize by -\rightskip + \advance\hsize by -\tableindent + \setbox0=\hbox{\itemindicate{#1}}% + \itemindex{#1}% + \nobreak % This prevents a break before @itemx. + % + % If the item text does not fit in the space we have, put it on a line + % by itself, and do not allow a page break either before or after that + % line. We do not start a paragraph here because then if the next + % command is, e.g., @kindex, the whatsit would get put into the + % horizontal list on a line by itself, resulting in extra blank space. + \ifdim \wd0>\itemmax + % + % Make this a paragraph so we get the \parskip glue and wrapping, + % but leave it ragged-right. + \begingroup + \advance\leftskip by-\tableindent + \advance\hsize by\tableindent + \advance\rightskip by0pt plus1fil + \leavevmode\unhbox0\par + \endgroup + % + % We're going to be starting a paragraph, but we don't want the + % \parskip glue -- logically it's part of the @item we just started. + \nobreak \vskip-\parskip + % + % Stop a page break at the \parskip glue coming up. However, if + % what follows is an environment such as @example, there will be no + % \parskip glue; then the negative vskip we just inserted would + % cause the example and the item to crash together. So we use this + % bizarre value of 10001 as a signal to \aboveenvbreak to insert + % \parskip glue after all. Section titles are handled this way also. + % + \penalty 10001 + \endgroup + \itemxneedsnegativevskipfalse + \else + % The item text fits into the space. Start a paragraph, so that the + % following text (if any) will end up on the same line. + \noindent + % Do this with kerns and \unhbox so that if there is a footnote in + % the item text, it can migrate to the main vertical list and + % eventually be printed. + \nobreak\kern-\tableindent + \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0 + \unhbox0 + \nobreak\kern\dimen0 + \endgroup + \itemxneedsnegativevskiptrue + \fi +} + +\def\item{\errmessage{@item while not in a list environment}} +\def\itemx{\errmessage{@itemx while not in a list environment}} + +% @table, @ftable, @vtable. +\envdef\table{% + \let\itemindex\gobble + \tablecheck{table}% +} +\envdef\ftable{% + \def\itemindex ##1{\doind {fn}{\code{##1}}}% + \tablecheck{ftable}% +} +\envdef\vtable{% + \def\itemindex ##1{\doind {vr}{\code{##1}}}% + \tablecheck{vtable}% +} +\def\tablecheck#1{% + \ifnum \the\catcode`\^^M=\active + \endgroup + \errmessage{This command won't work in this context; perhaps the problem is + that we are \inenvironment\thisenv}% + \def\next{\doignore{#1}}% + \else + \let\next\tablex + \fi + \next +} +\def\tablex#1{% + \def\itemindicate{#1}% + \parsearg\tabley +} +\def\tabley#1{% + {% + \makevalueexpandable + \edef\temp{\noexpand\tablez #1\space\space\space}% + \expandafter + }\temp \endtablez +} +\def\tablez #1 #2 #3 #4\endtablez{% + \aboveenvbreak + \ifnum 0#1>0 \advance \leftskip by #1\mil \fi + \ifnum 0#2>0 \tableindent=#2\mil \fi + \ifnum 0#3>0 \advance \rightskip by #3\mil \fi + \itemmax=\tableindent + \advance \itemmax by -\itemmargin + \advance \leftskip by \tableindent + \exdentamount=\tableindent + \parindent = 0pt + \parskip = \smallskipamount + \ifdim \parskip=0pt \parskip=2pt \fi + \let\item = \internalBitem + \let\itemx = \internalBitemx +} +\def\Etable{\endgraf\afterenvbreak} +\let\Eftable\Etable +\let\Evtable\Etable +\let\Eitemize\Etable +\let\Eenumerate\Etable + +% This is the counter used by @enumerate, which is really @itemize + +\newcount \itemno + +\envdef\itemize{\parsearg\doitemize} + +\def\doitemize#1{% + \aboveenvbreak + \itemmax=\itemindent + \advance\itemmax by -\itemmargin + \advance\leftskip by \itemindent + \exdentamount=\itemindent + \parindent=0pt + \parskip=\smallskipamount + \ifdim\parskip=0pt \parskip=2pt \fi + \def\itemcontents{#1}% + % @itemize with no arg is equivalent to @itemize @bullet. + \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi + \let\item=\itemizeitem +} + +% Definition of @item while inside @itemize and @enumerate. +% +\def\itemizeitem{% + \advance\itemno by 1 % for enumerations + {\let\par=\endgraf \smallbreak}% reasonable place to break + {% + % If the document has an @itemize directly after a section title, a + % \nobreak will be last on the list, and \sectionheading will have + % done a \vskip-\parskip. In that case, we don't want to zero + % parskip, or the item text will crash with the heading. On the + % other hand, when there is normal text preceding the item (as there + % usually is), we do want to zero parskip, or there would be too much + % space. In that case, we won't have a \nobreak before. At least + % that's the theory. + \ifnum\lastpenalty<10000 \parskip=0in \fi + \noindent + \hbox to 0pt{\hss \itemcontents \kern\itemmargin}% + \vadjust{\penalty 1200}}% not good to break after first line of item. + \flushcr +} + +% \splitoff TOKENS\endmark defines \first to be the first token in +% TOKENS, and \rest to be the remainder. +% +\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}% + +% Allow an optional argument of an uppercase letter, lowercase letter, +% or number, to specify the first label in the enumerated list. No +% argument is the same as `1'. +% +\envparseargdef\enumerate{\enumeratey #1 \endenumeratey} +\def\enumeratey #1 #2\endenumeratey{% + % If we were given no argument, pretend we were given `1'. + \def\thearg{#1}% + \ifx\thearg\empty \def\thearg{1}\fi + % + % Detect if the argument is a single token. If so, it might be a + % letter. Otherwise, the only valid thing it can be is a number. + % (We will always have one token, because of the test we just made. + % This is a good thing, since \splitoff doesn't work given nothing at + % all -- the first parameter is undelimited.) + \expandafter\splitoff\thearg\endmark + \ifx\rest\empty + % Only one token in the argument. It could still be anything. + % A ``lowercase letter'' is one whose \lccode is nonzero. + % An ``uppercase letter'' is one whose \lccode is both nonzero, and + % not equal to itself. + % Otherwise, we assume it's a number. + % + % We need the \relax at the end of the \ifnum lines to stop TeX from + % continuing to look for a . + % + \ifnum\lccode\expandafter`\thearg=0\relax + \numericenumerate % a number (we hope) + \else + % It's a letter. + \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax + \lowercaseenumerate % lowercase letter + \else + \uppercaseenumerate % uppercase letter + \fi + \fi + \else + % Multiple tokens in the argument. We hope it's a number. + \numericenumerate + \fi +} + +% An @enumerate whose labels are integers. The starting integer is +% given in \thearg. +% +\def\numericenumerate{% + \itemno = \thearg + \startenumeration{\the\itemno}% +} + +% The starting (lowercase) letter is in \thearg. +\def\lowercaseenumerate{% + \itemno = \expandafter`\thearg + \startenumeration{% + % Be sure we're not beyond the end of the alphabet. + \ifnum\itemno=0 + \errmessage{No more lowercase letters in @enumerate; get a bigger + alphabet}% + \fi + \char\lccode\itemno + }% +} + +% The starting (uppercase) letter is in \thearg. +\def\uppercaseenumerate{% + \itemno = \expandafter`\thearg + \startenumeration{% + % Be sure we're not beyond the end of the alphabet. + \ifnum\itemno=0 + \errmessage{No more uppercase letters in @enumerate; get a bigger + alphabet} + \fi + \char\uccode\itemno + }% +} + +% Call \doitemize, adding a period to the first argument and supplying the +% common last two arguments. Also subtract one from the initial value in +% \itemno, since @item increments \itemno. +% +\def\startenumeration#1{% + \advance\itemno by -1 + \doitemize{#1.}\flushcr +} + +% @alphaenumerate and @capsenumerate are abbreviations for giving an arg +% to @enumerate. +% +\def\alphaenumerate{\enumerate{a}} +\def\capsenumerate{\enumerate{A}} +\def\Ealphaenumerate{\Eenumerate} +\def\Ecapsenumerate{\Eenumerate} + + +% @multitable macros +% Amy Hendrickson, 8/18/94, 3/6/96 +% +% @multitable ... @end multitable will make as many columns as desired. +% Contents of each column will wrap at width given in preamble. Width +% can be specified either with sample text given in a template line, +% or in percent of \hsize, the current width of text on page. + +% Table can continue over pages but will only break between lines. + +% To make preamble: +% +% Either define widths of columns in terms of percent of \hsize: +% @multitable @columnfractions .25 .3 .45 +% @item ... +% +% Numbers following @columnfractions are the percent of the total +% current hsize to be used for each column. You may use as many +% columns as desired. + + +% Or use a template: +% @multitable {Column 1 template} {Column 2 template} {Column 3 template} +% @item ... +% using the widest term desired in each column. + +% Each new table line starts with @item, each subsequent new column +% starts with @tab. Empty columns may be produced by supplying @tab's +% with nothing between them for as many times as empty columns are needed, +% ie, @tab@tab@tab will produce two empty columns. + +% @item, @tab do not need to be on their own lines, but it will not hurt +% if they are. + +% Sample multitable: + +% @multitable {Column 1 template} {Column 2 template} {Column 3 template} +% @item first col stuff @tab second col stuff @tab third col +% @item +% first col stuff +% @tab +% second col stuff +% @tab +% third col +% @item first col stuff @tab second col stuff +% @tab Many paragraphs of text may be used in any column. +% +% They will wrap at the width determined by the template. +% @item@tab@tab This will be in third column. +% @end multitable + +% Default dimensions may be reset by user. +% @multitableparskip is vertical space between paragraphs in table. +% @multitableparindent is paragraph indent in table. +% @multitablecolmargin is horizontal space to be left between columns. +% @multitablelinespace is space to leave between table items, baseline +% to baseline. +% 0pt means it depends on current normal line spacing. +% +\newskip\multitableparskip +\newskip\multitableparindent +\newdimen\multitablecolspace +\newskip\multitablelinespace +\multitableparskip=0pt +\multitableparindent=6pt +\multitablecolspace=12pt +\multitablelinespace=0pt + +% Macros used to set up halign preamble: +% +\let\endsetuptable\relax +\def\xendsetuptable{\endsetuptable} +\let\columnfractions\relax +\def\xcolumnfractions{\columnfractions} +\newif\ifsetpercent + +% #1 is the @columnfraction, usually a decimal number like .5, but might +% be just 1. We just use it, whatever it is. +% +\def\pickupwholefraction#1 {% + \global\advance\colcount by 1 + \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}% + \setuptable +} + +\newcount\colcount +\def\setuptable#1{% + \def\firstarg{#1}% + \ifx\firstarg\xendsetuptable + \let\go = \relax + \else + \ifx\firstarg\xcolumnfractions + \global\setpercenttrue + \else + \ifsetpercent + \let\go\pickupwholefraction + \else + \global\advance\colcount by 1 + \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a + % separator; typically that is always in the input, anyway. + \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% + \fi + \fi + \ifx\go\pickupwholefraction + % Put the argument back for the \pickupwholefraction call, so + % we'll always have a period there to be parsed. + \def\go{\pickupwholefraction#1}% + \else + \let\go = \setuptable + \fi% + \fi + \go +} + +% multitable-only commands. +% +% @headitem starts a heading row, which we typeset in bold. +% Assignments have to be global since we are inside the implicit group +% of an alignment entry. Note that \everycr resets \everytab. +\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}% +% +% A \tab used to include \hskip1sp. But then the space in a template +% line is not enough. That is bad. So let's go back to just `&' until +% we encounter the problem it was intended to solve again. +% --karl, nathan@acm.org, 20apr99. +\def\tab{\checkenv\multitable &\the\everytab}% + +% @multitable ... @end multitable definitions: +% +\newtoks\everytab % insert after every tab. +% +\envdef\multitable{% + \vskip\parskip + \startsavinginserts + % + % @item within a multitable starts a normal row. + % We use \def instead of \let so that if one of the multitable entries + % contains an @itemize, we don't choke on the \item (seen as \crcr aka + % \endtemplate) expanding \doitemize. + \def\item{\crcr}% + % + \tolerance=9500 + \hbadness=9500 + \setmultitablespacing + \parskip=\multitableparskip + \parindent=\multitableparindent + \overfullrule=0pt + \global\colcount=0 + % + \everycr = {% + \noalign{% + \global\everytab={}% + \global\colcount=0 % Reset the column counter. + % Check for saved footnotes, etc. + \checkinserts + % Keeps underfull box messages off when table breaks over pages. + %\filbreak + % Maybe so, but it also creates really weird page breaks when the + % table breaks over pages. Wouldn't \vfil be better? Wait until the + % problem manifests itself, so it can be fixed for real --karl. + }% + }% + % + \parsearg\domultitable +} +\def\domultitable#1{% + % To parse everything between @multitable and @item: + \setuptable#1 \endsetuptable + % + % This preamble sets up a generic column definition, which will + % be used as many times as user calls for columns. + % \vtop will set a single line and will also let text wrap and + % continue for many paragraphs if desired. + \halign\bgroup &% + \global\advance\colcount by 1 + \multistrut + \vtop{% + % Use the current \colcount to find the correct column width: + \hsize=\expandafter\csname col\the\colcount\endcsname + % + % In order to keep entries from bumping into each other + % we will add a \leftskip of \multitablecolspace to all columns after + % the first one. + % + % If a template has been used, we will add \multitablecolspace + % to the width of each template entry. + % + % If the user has set preamble in terms of percent of \hsize we will + % use that dimension as the width of the column, and the \leftskip + % will keep entries from bumping into each other. Table will start at + % left margin and final column will justify at right margin. + % + % Make sure we don't inherit \rightskip from the outer environment. + \rightskip=0pt + \ifnum\colcount=1 + % The first column will be indented with the surrounding text. + \advance\hsize by\leftskip + \else + \ifsetpercent \else + % If user has not set preamble in terms of percent of \hsize + % we will advance \hsize by \multitablecolspace. + \advance\hsize by \multitablecolspace + \fi + % In either case we will make \leftskip=\multitablecolspace: + \leftskip=\multitablecolspace + \fi + % Ignoring space at the beginning and end avoids an occasional spurious + % blank line, when TeX decides to break the line at the space before the + % box from the multistrut, so the strut ends up on a line by itself. + % For example: + % @multitable @columnfractions .11 .89 + % @item @code{#} + % @tab Legal holiday which is valid in major parts of the whole country. + % Is automatically provided with highlighting sequences respectively + % marking characters. + \noindent\ignorespaces##\unskip\multistrut + }\cr +} +\def\Emultitable{% + \crcr + \egroup % end the \halign + \global\setpercentfalse +} + +\def\setmultitablespacing{% + \def\multistrut{\strut}% just use the standard line spacing + % + % Compute \multitablelinespace (if not defined by user) for use in + % \multitableparskip calculation. We used define \multistrut based on + % this, but (ironically) that caused the spacing to be off. + % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100. +\ifdim\multitablelinespace=0pt +\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip +\global\advance\multitablelinespace by-\ht0 +\fi +%% Test to see if parskip is larger than space between lines of +%% table. If not, do nothing. +%% If so, set to same dimension as multitablelinespace. +\ifdim\multitableparskip>\multitablelinespace +\global\multitableparskip=\multitablelinespace +\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller + %% than skip between lines in the table. +\fi% +\ifdim\multitableparskip=0pt +\global\multitableparskip=\multitablelinespace +\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller + %% than skip between lines in the table. +\fi} + + +\message{conditionals,} + +% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext, +% @ifnotxml always succeed. They currently do nothing; we don't +% attempt to check whether the conditionals are properly nested. But we +% have to remember that they are conditionals, so that @end doesn't +% attempt to close an environment group. +% +\def\makecond#1{% + \expandafter\let\csname #1\endcsname = \relax + \expandafter\let\csname iscond.#1\endcsname = 1 +} +\makecond{iftex} +\makecond{ifnotdocbook} +\makecond{ifnothtml} +\makecond{ifnotinfo} +\makecond{ifnotplaintext} +\makecond{ifnotxml} + +% Ignore @ignore, @ifhtml, @ifinfo, and the like. +% +\def\direntry{\doignore{direntry}} +\def\documentdescription{\doignore{documentdescription}} +\def\docbook{\doignore{docbook}} +\def\html{\doignore{html}} +\def\ifdocbook{\doignore{ifdocbook}} +\def\ifhtml{\doignore{ifhtml}} +\def\ifinfo{\doignore{ifinfo}} +\def\ifnottex{\doignore{ifnottex}} +\def\ifplaintext{\doignore{ifplaintext}} +\def\ifxml{\doignore{ifxml}} +\def\ignore{\doignore{ignore}} +\def\menu{\doignore{menu}} +\def\xml{\doignore{xml}} + +% Ignore text until a line `@end #1', keeping track of nested conditionals. +% +% A count to remember the depth of nesting. +\newcount\doignorecount + +\def\doignore#1{\begingroup + % Scan in ``verbatim'' mode: + \obeylines + \catcode`\@ = \other + \catcode`\{ = \other + \catcode`\} = \other + % + % Make sure that spaces turn into tokens that match what \doignoretext wants. + \spaceisspace + % + % Count number of #1's that we've seen. + \doignorecount = 0 + % + % Swallow text until we reach the matching `@end #1'. + \dodoignore{#1}% +} + +{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source. + \obeylines % + % + \gdef\dodoignore#1{% + % #1 contains the command name as a string, e.g., `ifinfo'. + % + % Define a command to find the next `@end #1'. + \long\def\doignoretext##1^^M@end #1{% + \doignoretextyyy##1^^M@#1\_STOP_}% + % + % And this command to find another #1 command, at the beginning of a + % line. (Otherwise, we would consider a line `@c @ifset', for + % example, to count as an @ifset for nesting.) + \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}% + % + % And now expand that command. + \doignoretext ^^M% + }% +} + +\def\doignoreyyy#1{% + \def\temp{#1}% + \ifx\temp\empty % Nothing found. + \let\next\doignoretextzzz + \else % Found a nested condition, ... + \advance\doignorecount by 1 + \let\next\doignoretextyyy % ..., look for another. + % If we're here, #1 ends with ^^M\ifinfo (for example). + \fi + \next #1% the token \_STOP_ is present just after this macro. +} + +% We have to swallow the remaining "\_STOP_". +% +\def\doignoretextzzz#1{% + \ifnum\doignorecount = 0 % We have just found the outermost @end. + \let\next\enddoignore + \else % Still inside a nested condition. + \advance\doignorecount by -1 + \let\next\doignoretext % Look for the next @end. + \fi + \next +} + +% Finish off ignored text. +{ \obeylines% + % Ignore anything after the last `@end #1'; this matters in verbatim + % environments, where otherwise the newline after an ignored conditional + % would result in a blank line in the output. + \gdef\enddoignore#1^^M{\endgroup\ignorespaces}% +} + + +% @set VAR sets the variable VAR to an empty value. +% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. +% +% Since we want to separate VAR from REST-OF-LINE (which might be +% empty), we can't just use \parsearg; we have to insert a space of our +% own to delimit the rest of the line, and then take it out again if we +% didn't need it. +% We rely on the fact that \parsearg sets \catcode`\ =10. +% +\parseargdef\set{\setyyy#1 \endsetyyy} +\def\setyyy#1 #2\endsetyyy{% + {% + \makevalueexpandable + \def\temp{#2}% + \edef\next{\gdef\makecsname{SET#1}}% + \ifx\temp\empty + \next{}% + \else + \setzzz#2\endsetzzz + \fi + }% +} +% Remove the trailing space \setxxx inserted. +\def\setzzz#1 \endsetzzz{\next{#1}} + +% @clear VAR clears (i.e., unsets) the variable VAR. +% +\parseargdef\clear{% + {% + \makevalueexpandable + \global\expandafter\let\csname SET#1\endcsname=\relax + }% +} + +% @value{foo} gets the text saved in variable foo. +\def\value{\begingroup\makevalueexpandable\valuexxx} +\def\valuexxx#1{\expandablevalue{#1}\endgroup} +{ + \catcode`\- = \active \catcode`\_ = \active + % + \gdef\makevalueexpandable{% + \let\value = \expandablevalue + % We don't want these characters active, ... + \catcode`\-=\other \catcode`\_=\other + % ..., but we might end up with active ones in the argument if + % we're called from @code, as @code{@value{foo-bar_}}, though. + % So \let them to their normal equivalents. + \let-\realdash \let_\normalunderscore + } +} + +% We have this subroutine so that we can handle at least some @value's +% properly in indexes (we call \makevalueexpandable in \indexdummies). +% The command has to be fully expandable (if the variable is set), since +% the result winds up in the index file. This means that if the +% variable's value contains other Texinfo commands, it's almost certain +% it will fail (although perhaps we could fix that with sufficient work +% to do a one-level expansion on the result, instead of complete). +% +\def\expandablevalue#1{% + \expandafter\ifx\csname SET#1\endcsname\relax + {[No value for ``#1'']}% + \message{Variable `#1', used in @value, is not set.}% + \else + \csname SET#1\endcsname + \fi +} + +% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined +% with @set. +% +% To get special treatment of `@end ifset,' call \makeond and the redefine. +% +\makecond{ifset} +\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}} +\def\doifset#1#2{% + {% + \makevalueexpandable + \let\next=\empty + \expandafter\ifx\csname SET#2\endcsname\relax + #1% If not set, redefine \next. + \fi + \expandafter + }\next +} +\def\ifsetfail{\doignore{ifset}} + +% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been +% defined with @set, or has been undefined with @clear. +% +% The `\else' inside the `\doifset' parameter is a trick to reuse the +% above code: if the variable is not set, do nothing, if it is set, +% then redefine \next to \ifclearfail. +% +\makecond{ifclear} +\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}} +\def\ifclearfail{\doignore{ifclear}} + +% @dircategory CATEGORY -- specify a category of the dir file +% which this file should belong to. Ignore this in TeX. +\let\dircategory=\comment + +% @defininfoenclose. +\let\definfoenclose=\comment + + +\message{indexing,} +% Index generation facilities + +% Define \newwrite to be identical to plain tex's \newwrite +% except not \outer, so it can be used within macros and \if's. +\edef\newwrite{\makecsname{ptexnewwrite}} + +% \newindex {foo} defines an index named foo. +% It automatically defines \fooindex such that +% \fooindex ...rest of line... puts an entry in the index foo. +% It also defines \fooindfile to be the number of the output channel for +% the file that accumulates this index. The file's extension is foo. +% The name of an index should be no more than 2 characters long +% for the sake of vms. +% +\def\newindex#1{% + \iflinks + \expandafter\newwrite \csname#1indfile\endcsname + \openout \csname#1indfile\endcsname \jobname.#1 % Open the file + \fi + \expandafter\xdef\csname#1index\endcsname{% % Define @#1index + \noexpand\doindex{#1}} +} + +% @defindex foo == \newindex{foo} +% +\def\defindex{\parsearg\newindex} + +% Define @defcodeindex, like @defindex except put all entries in @code. +% +\def\defcodeindex{\parsearg\newcodeindex} +% +\def\newcodeindex#1{% + \iflinks + \expandafter\newwrite \csname#1indfile\endcsname + \openout \csname#1indfile\endcsname \jobname.#1 + \fi + \expandafter\xdef\csname#1index\endcsname{% + \noexpand\docodeindex{#1}}% +} + + +% @synindex foo bar makes index foo feed into index bar. +% Do this instead of @defindex foo if you don't want it as a separate index. +% +% @syncodeindex foo bar similar, but put all entries made for index foo +% inside @code. +% +\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}} +\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}} + +% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo), +% #3 the target index (bar). +\def\dosynindex#1#2#3{% + % Only do \closeout if we haven't already done it, else we'll end up + % closing the target index. + \expandafter \ifx\csname donesynindex#2\endcsname \undefined + % The \closeout helps reduce unnecessary open files; the limit on the + % Acorn RISC OS is a mere 16 files. + \expandafter\closeout\csname#2indfile\endcsname + \expandafter\let\csname\donesynindex#2\endcsname = 1 + \fi + % redefine \fooindfile: + \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname + \expandafter\let\csname#2indfile\endcsname=\temp + % redefine \fooindex: + \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}% +} + +% Define \doindex, the driver for all \fooindex macros. +% Argument #1 is generated by the calling \fooindex macro, +% and it is "foo", the name of the index. + +% \doindex just uses \parsearg; it calls \doind for the actual work. +% This is because \doind is more useful to call from other macros. + +% There is also \dosubind {index}{topic}{subtopic} +% which makes an entry in a two-level index such as the operation index. + +\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer} +\def\singleindexer #1{\doind{\indexname}{#1}} + +% like the previous two, but they put @code around the argument. +\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer} +\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}} + +% Take care of Texinfo commands that can appear in an index entry. +% Since there are some commands we want to expand, and others we don't, +% we have to laboriously prevent expansion for those that we don't. +% +\def\indexdummies{% + \escapechar = `\\ % use backslash in output files. + \def\@{@}% change to @@ when we switch to @ as escape char in index files. + \def\ {\realbackslash\space }% + % + % Need these in case \tex is in effect and \{ is a \delimiter again. + % But can't use \lbracecmd and \rbracecmd because texindex assumes + % braces and backslashes are used only as delimiters. + \let\{ = \mylbrace + \let\} = \myrbrace + % + % I don't entirely understand this, but when an index entry is + % generated from a macro call, the \endinput which \scanmacro inserts + % causes processing to be prematurely terminated. This is, + % apparently, because \indexsorttmp is fully expanded, and \endinput + % is an expandable command. The redefinition below makes \endinput + % disappear altogether for that purpose -- although logging shows that + % processing continues to some further point. On the other hand, it + % seems \endinput does not hurt in the printed index arg, since that + % is still getting written without apparent harm. + % + % Sample source (mac-idx3.tex, reported by Graham Percival to + % help-texinfo, 22may06): + % @macro funindex {WORD} + % @findex xyz + % @end macro + % ... + % @funindex commtest + % + % The above is not enough to reproduce the bug, but it gives the flavor. + % + % Sample whatsit resulting: + % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}} + % + % So: + \let\endinput = \empty + % + % Do the redefinitions. + \commondummies +} + +% For the aux and toc files, @ is the escape character. So we want to +% redefine everything using @ as the escape character (instead of +% \realbackslash, still used for index files). When everything uses @, +% this will be simpler. +% +\def\atdummies{% + \def\@{@@}% + \def\ {@ }% + \let\{ = \lbraceatcmd + \let\} = \rbraceatcmd + % + % Do the redefinitions. + \commondummies + \otherbackslash +} + +% Called from \indexdummies and \atdummies. +% +\def\commondummies{% + % + % \definedummyword defines \#1 as \string\#1\space, thus effectively + % preventing its expansion. This is used only for control% words, + % not control letters, because the \space would be incorrect for + % control characters, but is needed to separate the control word + % from whatever follows. + % + % For control letters, we have \definedummyletter, which omits the + % space. + % + % These can be used both for control words that take an argument and + % those that do not. If it is followed by {arg} in the input, then + % that will dutifully get written to the index (or wherever). + % + \def\definedummyword ##1{\def##1{\string##1\space}}% + \def\definedummyletter##1{\def##1{\string##1}}% + \let\definedummyaccent\definedummyletter + % + \commondummiesnofonts + % + \definedummyletter\_% + % + % Non-English letters. + \definedummyword\AA + \definedummyword\AE + \definedummyword\L + \definedummyword\OE + \definedummyword\O + \definedummyword\aa + \definedummyword\ae + \definedummyword\l + \definedummyword\oe + \definedummyword\o + \definedummyword\ss + \definedummyword\exclamdown + \definedummyword\questiondown + \definedummyword\ordf + \definedummyword\ordm + % + % Although these internal commands shouldn't show up, sometimes they do. + \definedummyword\bf + \definedummyword\gtr + \definedummyword\hat + \definedummyword\less + \definedummyword\sf + \definedummyword\sl + \definedummyword\tclose + \definedummyword\tt + % + \definedummyword\LaTeX + \definedummyword\TeX + % + % Assorted special characters. + \definedummyword\bullet + \definedummyword\comma + \definedummyword\copyright + \definedummyword\registeredsymbol + \definedummyword\dots + \definedummyword\enddots + \definedummyword\equiv + \definedummyword\error + \definedummyword\euro + \definedummyword\expansion + \definedummyword\minus + \definedummyword\pounds + \definedummyword\point + \definedummyword\print + \definedummyword\result + \definedummyword\textdegree + % + % We want to disable all macros so that they are not expanded by \write. + \macrolist + % + \normalturnoffactive + % + % Handle some cases of @value -- where it does not contain any + % (non-fully-expandable) commands. + \makevalueexpandable +} + +% \commondummiesnofonts: common to \commondummies and \indexnofonts. +% +\def\commondummiesnofonts{% + % Control letters and accents. + \definedummyletter\!% + \definedummyaccent\"% + \definedummyaccent\'% + \definedummyletter\*% + \definedummyaccent\,% + \definedummyletter\.% + \definedummyletter\/% + \definedummyletter\:% + \definedummyaccent\=% + \definedummyletter\?% + \definedummyaccent\^% + \definedummyaccent\`% + \definedummyaccent\~% + \definedummyword\u + \definedummyword\v + \definedummyword\H + \definedummyword\dotaccent + \definedummyword\ringaccent + \definedummyword\tieaccent + \definedummyword\ubaraccent + \definedummyword\udotaccent + \definedummyword\dotless + % + % Texinfo font commands. + \definedummyword\b + \definedummyword\i + \definedummyword\r + \definedummyword\sc + \definedummyword\t + % + % Commands that take arguments. + \definedummyword\acronym + \definedummyword\cite + \definedummyword\code + \definedummyword\command + \definedummyword\dfn + \definedummyword\emph + \definedummyword\env + \definedummyword\file + \definedummyword\kbd + \definedummyword\key + \definedummyword\math + \definedummyword\option + \definedummyword\pxref + \definedummyword\ref + \definedummyword\samp + \definedummyword\strong + \definedummyword\tie + \definedummyword\uref + \definedummyword\url + \definedummyword\var + \definedummyword\verb + \definedummyword\w + \definedummyword\xref +} + +% \indexnofonts is used when outputting the strings to sort the index +% by, and when constructing control sequence names. It eliminates all +% control sequences and just writes whatever the best ASCII sort string +% would be for a given command (usually its argument). +% +\def\indexnofonts{% + % Accent commands should become @asis. + \def\definedummyaccent##1{\let##1\asis}% + % We can just ignore other control letters. + \def\definedummyletter##1{\let##1\empty}% + % Hopefully, all control words can become @asis. + \let\definedummyword\definedummyaccent + % + \commondummiesnofonts + % + % Don't no-op \tt, since it isn't a user-level command + % and is used in the definitions of the active chars like <, >, |, etc. + % Likewise with the other plain tex font commands. + %\let\tt=\asis + % + \def\ { }% + \def\@{@}% + % how to handle braces? + \def\_{\normalunderscore}% + % + % Non-English letters. + \def\AA{AA}% + \def\AE{AE}% + \def\L{L}% + \def\OE{OE}% + \def\O{O}% + \def\aa{aa}% + \def\ae{ae}% + \def\l{l}% + \def\oe{oe}% + \def\o{o}% + \def\ss{ss}% + \def\exclamdown{!}% + \def\questiondown{?}% + \def\ordf{a}% + \def\ordm{o}% + % + \def\LaTeX{LaTeX}% + \def\TeX{TeX}% + % + % Assorted special characters. + % (The following {} will end up in the sort string, but that's ok.) + \def\bullet{bullet}% + \def\comma{,}% + \def\copyright{copyright}% + \def\registeredsymbol{R}% + \def\dots{...}% + \def\enddots{...}% + \def\equiv{==}% + \def\error{error}% + \def\euro{euro}% + \def\expansion{==>}% + \def\minus{-}% + \def\pounds{pounds}% + \def\point{.}% + \def\print{-|}% + \def\result{=>}% + \def\textdegree{degrees}% + % + % We need to get rid of all macros, leaving only the arguments (if present). + % Of course this is not nearly correct, but it is the best we can do for now. + % makeinfo does not expand macros in the argument to @deffn, which ends up + % writing an index entry, and texindex isn't prepared for an index sort entry + % that starts with \. + % + % Since macro invocations are followed by braces, we can just redefine them + % to take a single TeX argument. The case of a macro invocation that + % goes to end-of-line is not handled. + % + \macrolist +} + +\let\indexbackslash=0 %overridden during \printindex. +\let\SETmarginindex=\relax % put index entries in margin (undocumented)? + +% Most index entries go through here, but \dosubind is the general case. +% #1 is the index name, #2 is the entry text. +\def\doind#1#2{\dosubind{#1}{#2}{}} + +% Workhorse for all \fooindexes. +% #1 is name of index, #2 is stuff to put there, #3 is subentry -- +% empty if called from \doind, as we usually are (the main exception +% is with most defuns, which call us directly). +% +\def\dosubind#1#2#3{% + \iflinks + {% + % Store the main index entry text (including the third arg). + \toks0 = {#2}% + % If third arg is present, precede it with a space. + \def\thirdarg{#3}% + \ifx\thirdarg\empty \else + \toks0 = \expandafter{\the\toks0 \space #3}% + \fi + % + \edef\writeto{\csname#1indfile\endcsname}% + % + \safewhatsit\dosubindwrite + }% + \fi +} + +% Write the entry in \toks0 to the index file: +% +\def\dosubindwrite{% + % Put the index entry in the margin if desired. + \ifx\SETmarginindex\relax\else + \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}% + \fi + % + % Remember, we are within a group. + \indexdummies % Must do this here, since \bf, etc expand at this stage + \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now + % so it will be output as is; and it will print as backslash. + % + % Process the index entry with all font commands turned off, to + % get the string to sort by. + {\indexnofonts + \edef\temp{\the\toks0}% need full expansion + \xdef\indexsorttmp{\temp}% + }% + % + % Set up the complete index entry, with both the sort key and + % the original text, including any font commands. We write + % three arguments to \entry to the .?? file (four in the + % subentry case), texindex reduces to two when writing the .??s + % sorted result. + \edef\temp{% + \write\writeto{% + \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}% + }% + \temp +} + +% Take care of unwanted page breaks/skips around a whatsit: +% +% If a skip is the last thing on the list now, preserve it +% by backing up by \lastskip, doing the \write, then inserting +% the skip again. Otherwise, the whatsit generated by the +% \write or \pdfdest will make \lastskip zero. The result is that +% sequences like this: +% @end defun +% @tindex whatever +% @defun ... +% will have extra space inserted, because the \medbreak in the +% start of the @defun won't see the skip inserted by the @end of +% the previous defun. +% +% But don't do any of this if we're not in vertical mode. We +% don't want to do a \vskip and prematurely end a paragraph. +% +% Avoid page breaks due to these extra skips, too. +% +% But wait, there is a catch there: +% We'll have to check whether \lastskip is zero skip. \ifdim is not +% sufficient for this purpose, as it ignores stretch and shrink parts +% of the skip. The only way seems to be to check the textual +% representation of the skip. +% +% The following is almost like \def\zeroskipmacro{0.0pt} except that +% the ``p'' and ``t'' characters have catcode \other, not 11 (letter). +% +\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname} +% +\newskip\whatsitskip +\newcount\whatsitpenalty +% +% ..., ready, GO: +% +\def\safewhatsit#1{% +\ifhmode + #1% +\else + % \lastskip and \lastpenalty cannot both be nonzero simultaneously. + \whatsitskip = \lastskip + \edef\lastskipmacro{\the\lastskip}% + \whatsitpenalty = \lastpenalty + % + % If \lastskip is nonzero, that means the last item was a + % skip. And since a skip is discardable, that means this + % -\skip0 glue we're inserting is preceded by a + % non-discardable item, therefore it is not a potential + % breakpoint, therefore no \nobreak needed. + \ifx\lastskipmacro\zeroskipmacro + \else + \vskip-\whatsitskip + \fi + % + #1% + % + \ifx\lastskipmacro\zeroskipmacro + % If \lastskip was zero, perhaps the last item was a penalty, and + % perhaps it was >=10000, e.g., a \nobreak. In that case, we want + % to re-insert the same penalty (values >10000 are used for various + % signals); since we just inserted a non-discardable item, any + % following glue (such as a \parskip) would be a breakpoint. For example: + % + % @deffn deffn-whatever + % @vindex index-whatever + % Description. + % would allow a break between the index-whatever whatsit + % and the "Description." paragraph. + \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi + \else + % On the other hand, if we had a nonzero \lastskip, + % this make-up glue would be preceded by a non-discardable item + % (the whatsit from the \write), so we must insert a \nobreak. + \nobreak\vskip\whatsitskip + \fi +\fi +} + +% The index entry written in the file actually looks like +% \entry {sortstring}{page}{topic} +% or +% \entry {sortstring}{page}{topic}{subtopic} +% The texindex program reads in these files and writes files +% containing these kinds of lines: +% \initial {c} +% before the first topic whose initial is c +% \entry {topic}{pagelist} +% for a topic that is used without subtopics +% \primary {topic} +% for the beginning of a topic that is used with subtopics +% \secondary {subtopic}{pagelist} +% for each subtopic. + +% Define the user-accessible indexing commands +% @findex, @vindex, @kindex, @cindex. + +\def\findex {\fnindex} +\def\kindex {\kyindex} +\def\cindex {\cpindex} +\def\vindex {\vrindex} +\def\tindex {\tpindex} +\def\pindex {\pgindex} + +\def\cindexsub {\begingroup\obeylines\cindexsub} +{\obeylines % +\gdef\cindexsub "#1" #2^^M{\endgroup % +\dosubind{cp}{#2}{#1}}} + +% Define the macros used in formatting output of the sorted index material. + +% @printindex causes a particular index (the ??s file) to get printed. +% It does not print any chapter heading (usually an @unnumbered). +% +\parseargdef\printindex{\begingroup + \dobreak \chapheadingskip{10000}% + % + \smallfonts \rm + \tolerance = 9500 + \plainfrenchspacing + \everypar = {}% don't want the \kern\-parindent from indentation suppression. + % + % See if the index file exists and is nonempty. + % Change catcode of @ here so that if the index file contains + % \initial {@} + % as its first line, TeX doesn't complain about mismatched braces + % (because it thinks @} is a control sequence). + \catcode`\@ = 11 + \openin 1 \jobname.#1s + \ifeof 1 + % \enddoublecolumns gets confused if there is no text in the index, + % and it loses the chapter title and the aux file entries for the + % index. The easiest way to prevent this problem is to make sure + % there is some text. + \putwordIndexNonexistent + \else + % + % If the index file exists but is empty, then \openin leaves \ifeof + % false. We have to make TeX try to read something from the file, so + % it can discover if there is anything in it. + \read 1 to \temp + \ifeof 1 + \putwordIndexIsEmpty + \else + % Index files are almost Texinfo source, but we use \ as the escape + % character. It would be better to use @, but that's too big a change + % to make right now. + \def\indexbackslash{\backslashcurfont}% + \catcode`\\ = 0 + \escapechar = `\\ + \begindoublecolumns + \input \jobname.#1s + \enddoublecolumns + \fi + \fi + \closein 1 +\endgroup} + +% These macros are used by the sorted index file itself. +% Change them to control the appearance of the index. + +\def\initial#1{{% + % Some minor font changes for the special characters. + \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt + % + % Remove any glue we may have, we'll be inserting our own. + \removelastskip + % + % We like breaks before the index initials, so insert a bonus. + \nobreak + \vskip 0pt plus 3\baselineskip + \penalty 0 + \vskip 0pt plus -3\baselineskip + % + % Typeset the initial. Making this add up to a whole number of + % baselineskips increases the chance of the dots lining up from column + % to column. It still won't often be perfect, because of the stretch + % we need before each entry, but it's better. + % + % No shrink because it confuses \balancecolumns. + \vskip 1.67\baselineskip plus .5\baselineskip + \leftline{\secbf #1}% + % Do our best not to break after the initial. + \nobreak + \vskip .33\baselineskip plus .1\baselineskip +}} + +% \entry typesets a paragraph consisting of the text (#1), dot leaders, and +% then page number (#2) flushed to the right margin. It is used for index +% and table of contents entries. The paragraph is indented by \leftskip. +% +% A straightforward implementation would start like this: +% \def\entry#1#2{... +% But this frozes the catcodes in the argument, and can cause problems to +% @code, which sets - active. This problem was fixed by a kludge--- +% ``-'' was active throughout whole index, but this isn't really right. +% +% The right solution is to prevent \entry from swallowing the whole text. +% --kasal, 21nov03 +\def\entry{% + \begingroup + % + % Start a new paragraph if necessary, so our assignments below can't + % affect previous text. + \par + % + % Do not fill out the last line with white space. + \parfillskip = 0in + % + % No extra space above this paragraph. + \parskip = 0in + % + % Do not prefer a separate line ending with a hyphen to fewer lines. + \finalhyphendemerits = 0 + % + % \hangindent is only relevant when the entry text and page number + % don't both fit on one line. In that case, bob suggests starting the + % dots pretty far over on the line. Unfortunately, a large + % indentation looks wrong when the entry text itself is broken across + % lines. So we use a small indentation and put up with long leaders. + % + % \hangafter is reset to 1 (which is the value we want) at the start + % of each paragraph, so we need not do anything with that. + \hangindent = 2em + % + % When the entry text needs to be broken, just fill out the first line + % with blank space. + \rightskip = 0pt plus1fil + % + % A bit of stretch before each entry for the benefit of balancing + % columns. + \vskip 0pt plus1pt + % + % Swallow the left brace of the text (first parameter): + \afterassignment\doentry + \let\temp = +} +\def\doentry{% + \bgroup % Instead of the swallowed brace. + \noindent + \aftergroup\finishentry + % And now comes the text of the entry. +} +\def\finishentry#1{% + % #1 is the page number. + % + % The following is kludged to not output a line of dots in the index if + % there are no page numbers. The next person who breaks this will be + % cursed by a Unix daemon. + \def\tempa{{\rm }}% + \def\tempb{#1}% + \edef\tempc{\tempa}% + \edef\tempd{\tempb}% + \ifx\tempc\tempd + \ % + \else + % + % If we must, put the page number on a line of its own, and fill out + % this line with blank space. (The \hfil is overwhelmed with the + % fill leaders glue in \indexdotfill if the page number does fit.) + \hfil\penalty50 + \null\nobreak\indexdotfill % Have leaders before the page number. + % + % The `\ ' here is removed by the implicit \unskip that TeX does as + % part of (the primitive) \par. Without it, a spurious underfull + % \hbox ensues. + \ifpdf + \pdfgettoks#1.% + \ \the\toksA + \else + \ #1% + \fi + \fi + \par + \endgroup +} + +% Like plain.tex's \dotfill, except uses up at least 1 em. +\def\indexdotfill{\cleaders + \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill} + +\def\primary #1{\line{#1\hfil}} + +\newskip\secondaryindent \secondaryindent=0.5cm +\def\secondary#1#2{{% + \parfillskip=0in + \parskip=0in + \hangindent=1in + \hangafter=1 + \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill + \ifpdf + \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. + \else + #2 + \fi + \par +}} + +% Define two-column mode, which we use to typeset indexes. +% Adapted from the TeXbook, page 416, which is to say, +% the manmac.tex format used to print the TeXbook itself. +\catcode`\@=11 + +\newbox\partialpage +\newdimen\doublecolumnhsize + +\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns + % Grab any single-column material above us. + \output = {% + % + % Here is a possibility not foreseen in manmac: if we accumulate a + % whole lot of material, we might end up calling this \output + % routine twice in a row (see the doublecol-lose test, which is + % essentially a couple of indexes with @setchapternewpage off). In + % that case we just ship out what is in \partialpage with the normal + % output routine. Generally, \partialpage will be empty when this + % runs and this will be a no-op. See the indexspread.tex test case. + \ifvoid\partialpage \else + \onepageout{\pagecontents\partialpage}% + \fi + % + \global\setbox\partialpage = \vbox{% + % Unvbox the main output page. + \unvbox\PAGE + \kern-\topskip \kern\baselineskip + }% + }% + \eject % run that output routine to set \partialpage + % + % Use the double-column output routine for subsequent pages. + \output = {\doublecolumnout}% + % + % Change the page size parameters. We could do this once outside this + % routine, in each of @smallbook, @afourpaper, and the default 8.5x11 + % format, but then we repeat the same computation. Repeating a couple + % of assignments once per index is clearly meaningless for the + % execution time, so we may as well do it in one place. + % + % First we halve the line length, less a little for the gutter between + % the columns. We compute the gutter based on the line length, so it + % changes automatically with the paper format. The magic constant + % below is chosen so that the gutter has the same value (well, +-<1pt) + % as it did when we hard-coded it. + % + % We put the result in a separate register, \doublecolumhsize, so we + % can restore it in \pagesofar, after \hsize itself has (potentially) + % been clobbered. + % + \doublecolumnhsize = \hsize + \advance\doublecolumnhsize by -.04154\hsize + \divide\doublecolumnhsize by 2 + \hsize = \doublecolumnhsize + % + % Double the \vsize as well. (We don't need a separate register here, + % since nobody clobbers \vsize.) + \vsize = 2\vsize +} + +% The double-column output routine for all double-column pages except +% the last. +% +\def\doublecolumnout{% + \splittopskip=\topskip \splitmaxdepth=\maxdepth + % Get the available space for the double columns -- the normal + % (undoubled) page height minus any material left over from the + % previous page. + \dimen@ = \vsize + \divide\dimen@ by 2 + \advance\dimen@ by -\ht\partialpage + % + % box0 will be the left-hand column, box2 the right. + \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@ + \onepageout\pagesofar + \unvbox255 + \penalty\outputpenalty +} +% +% Re-output the contents of the output page -- any previous material, +% followed by the two boxes we just split, in box0 and box2. +\def\pagesofar{% + \unvbox\partialpage + % + \hsize = \doublecolumnhsize + \wd0=\hsize \wd2=\hsize + \hbox to\pagewidth{\box0\hfil\box2}% +} +% +% All done with double columns. +\def\enddoublecolumns{% + % The following penalty ensures that the page builder is exercised + % _before_ we change the output routine. This is necessary in the + % following situation: + % + % The last section of the index consists only of a single entry. + % Before this section, \pagetotal is less than \pagegoal, so no + % break occurs before the last section starts. However, the last + % section, consisting of \initial and the single \entry, does not + % fit on the page and has to be broken off. Without the following + % penalty the page builder will not be exercised until \eject + % below, and by that time we'll already have changed the output + % routine to the \balancecolumns version, so the next-to-last + % double-column page will be processed with \balancecolumns, which + % is wrong: The two columns will go to the main vertical list, with + % the broken-off section in the recent contributions. As soon as + % the output routine finishes, TeX starts reconsidering the page + % break. The two columns and the broken-off section both fit on the + % page, because the two columns now take up only half of the page + % goal. When TeX sees \eject from below which follows the final + % section, it invokes the new output routine that we've set after + % \balancecolumns below; \onepageout will try to fit the two columns + % and the final section into the vbox of \pageheight (see + % \pagebody), causing an overfull box. + % + % Note that glue won't work here, because glue does not exercise the + % page builder, unlike penalties (see The TeXbook, pp. 280-281). + \penalty0 + % + \output = {% + % Split the last of the double-column material. Leave it on the + % current page, no automatic page break. + \balancecolumns + % + % If we end up splitting too much material for the current page, + % though, there will be another page break right after this \output + % invocation ends. Having called \balancecolumns once, we do not + % want to call it again. Therefore, reset \output to its normal + % definition right away. (We hope \balancecolumns will never be + % called on to balance too much material, but if it is, this makes + % the output somewhat more palatable.) + \global\output = {\onepageout{\pagecontents\PAGE}}% + }% + \eject + \endgroup % started in \begindoublecolumns + % + % \pagegoal was set to the doubled \vsize above, since we restarted + % the current page. We're now back to normal single-column + % typesetting, so reset \pagegoal to the normal \vsize (after the + % \endgroup where \vsize got restored). + \pagegoal = \vsize +} +% +% Called at the end of the double column material. +\def\balancecolumns{% + \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120. + \dimen@ = \ht0 + \advance\dimen@ by \topskip + \advance\dimen@ by-\baselineskip + \divide\dimen@ by 2 % target to split to + %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}% + \splittopskip = \topskip + % Loop until we get a decent breakpoint. + {% + \vbadness = 10000 + \loop + \global\setbox3 = \copy0 + \global\setbox1 = \vsplit3 to \dimen@ + \ifdim\ht3>\dimen@ + \global\advance\dimen@ by 1pt + \repeat + }% + %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}% + \setbox0=\vbox to\dimen@{\unvbox1}% + \setbox2=\vbox to\dimen@{\unvbox3}% + % + \pagesofar +} +\catcode`\@ = \other + + +\message{sectioning,} +% Chapters, sections, etc. + +% \unnumberedno is an oxymoron, of course. But we count the unnumbered +% sections so that we can refer to them unambiguously in the pdf +% outlines by their "section number". We avoid collisions with chapter +% numbers by starting them at 10000. (If a document ever has 10000 +% chapters, we're in trouble anyway, I'm sure.) +\newcount\unnumberedno \unnumberedno = 10000 +\newcount\chapno +\newcount\secno \secno=0 +\newcount\subsecno \subsecno=0 +\newcount\subsubsecno \subsubsecno=0 + +% This counter is funny since it counts through charcodes of letters A, B, ... +\newcount\appendixno \appendixno = `\@ +% +% \def\appendixletter{\char\the\appendixno} +% We do the following ugly conditional instead of the above simple +% construct for the sake of pdftex, which needs the actual +% letter in the expansion, not just typeset. +% +\def\appendixletter{% + \ifnum\appendixno=`A A% + \else\ifnum\appendixno=`B B% + \else\ifnum\appendixno=`C C% + \else\ifnum\appendixno=`D D% + \else\ifnum\appendixno=`E E% + \else\ifnum\appendixno=`F F% + \else\ifnum\appendixno=`G G% + \else\ifnum\appendixno=`H H% + \else\ifnum\appendixno=`I I% + \else\ifnum\appendixno=`J J% + \else\ifnum\appendixno=`K K% + \else\ifnum\appendixno=`L L% + \else\ifnum\appendixno=`M M% + \else\ifnum\appendixno=`N N% + \else\ifnum\appendixno=`O O% + \else\ifnum\appendixno=`P P% + \else\ifnum\appendixno=`Q Q% + \else\ifnum\appendixno=`R R% + \else\ifnum\appendixno=`S S% + \else\ifnum\appendixno=`T T% + \else\ifnum\appendixno=`U U% + \else\ifnum\appendixno=`V V% + \else\ifnum\appendixno=`W W% + \else\ifnum\appendixno=`X X% + \else\ifnum\appendixno=`Y Y% + \else\ifnum\appendixno=`Z Z% + % The \the is necessary, despite appearances, because \appendixletter is + % expanded while writing the .toc file. \char\appendixno is not + % expandable, thus it is written literally, thus all appendixes come out + % with the same letter (or @) in the toc without it. + \else\char\the\appendixno + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi + \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi} + +% Each @chapter defines this as the name of the chapter. +% page headings and footings can use it. @section does likewise. +% However, they are not reliable, because we don't use marks. +\def\thischapter{} +\def\thissection{} + +\newcount\absseclevel % used to calculate proper heading level +\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count + +% @raisesections: treat @section as chapter, @subsection as section, etc. +\def\raisesections{\global\advance\secbase by -1} +\let\up=\raisesections % original BFox name + +% @lowersections: treat @chapter as section, @section as subsection, etc. +\def\lowersections{\global\advance\secbase by 1} +\let\down=\lowersections % original BFox name + +% we only have subsub. +\chardef\maxseclevel = 3 +% +% A numbered section within an unnumbered changes to unnumbered too. +% To achive this, remember the "biggest" unnum. sec. we are currently in: +\chardef\unmlevel = \maxseclevel +% +% Trace whether the current chapter is an appendix or not: +% \chapheadtype is "N" or "A", unnumbered chapters are ignored. +\def\chapheadtype{N} + +% Choose a heading macro +% #1 is heading type +% #2 is heading level +% #3 is text for heading +\def\genhead#1#2#3{% + % Compute the abs. sec. level: + \absseclevel=#2 + \advance\absseclevel by \secbase + % Make sure \absseclevel doesn't fall outside the range: + \ifnum \absseclevel < 0 + \absseclevel = 0 + \else + \ifnum \absseclevel > 3 + \absseclevel = 3 + \fi + \fi + % The heading type: + \def\headtype{#1}% + \if \headtype U% + \ifnum \absseclevel < \unmlevel + \chardef\unmlevel = \absseclevel + \fi + \else + % Check for appendix sections: + \ifnum \absseclevel = 0 + \edef\chapheadtype{\headtype}% + \else + \if \headtype A\if \chapheadtype N% + \errmessage{@appendix... within a non-appendix chapter}% + \fi\fi + \fi + % Check for numbered within unnumbered: + \ifnum \absseclevel > \unmlevel + \def\headtype{U}% + \else + \chardef\unmlevel = 3 + \fi + \fi + % Now print the heading: + \if \headtype U% + \ifcase\absseclevel + \unnumberedzzz{#3}% + \or \unnumberedseczzz{#3}% + \or \unnumberedsubseczzz{#3}% + \or \unnumberedsubsubseczzz{#3}% + \fi + \else + \if \headtype A% + \ifcase\absseclevel + \appendixzzz{#3}% + \or \appendixsectionzzz{#3}% + \or \appendixsubseczzz{#3}% + \or \appendixsubsubseczzz{#3}% + \fi + \else + \ifcase\absseclevel + \chapterzzz{#3}% + \or \seczzz{#3}% + \or \numberedsubseczzz{#3}% + \or \numberedsubsubseczzz{#3}% + \fi + \fi + \fi + \suppressfirstparagraphindent +} + +% an interface: +\def\numhead{\genhead N} +\def\apphead{\genhead A} +\def\unnmhead{\genhead U} + +% @chapter, @appendix, @unnumbered. Increment top-level counter, reset +% all lower-level sectioning counters to zero. +% +% Also set \chaplevelprefix, which we prepend to @float sequence numbers +% (e.g., figures), q.v. By default (before any chapter), that is empty. +\let\chaplevelprefix = \empty +% +\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz +\def\chapterzzz#1{% + % section resetting is \global in case the chapter is in a group, such + % as an @include file. + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\chapno by 1 + % + % Used for \float. + \gdef\chaplevelprefix{\the\chapno.}% + \resetallfloatnos + % + \message{\putwordChapter\space \the\chapno}% + % + % Write the actual heading. + \chapmacro{#1}{Ynumbered}{\the\chapno}% + % + % So @section and the like are numbered underneath this chapter. + \global\let\section = \numberedsec + \global\let\subsection = \numberedsubsec + \global\let\subsubsection = \numberedsubsubsec +} + +\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz +\def\appendixzzz#1{% + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\appendixno by 1 + \gdef\chaplevelprefix{\appendixletter.}% + \resetallfloatnos + % + \def\appendixnum{\putwordAppendix\space \appendixletter}% + \message{\appendixnum}% + % + \chapmacro{#1}{Yappendix}{\appendixletter}% + % + \global\let\section = \appendixsec + \global\let\subsection = \appendixsubsec + \global\let\subsubsection = \appendixsubsubsec +} + +\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz +\def\unnumberedzzz#1{% + \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 + \global\advance\unnumberedno by 1 + % + % Since an unnumbered has no number, no prefix for figures. + \global\let\chaplevelprefix = \empty + \resetallfloatnos + % + % This used to be simply \message{#1}, but TeX fully expands the + % argument to \message. Therefore, if #1 contained @-commands, TeX + % expanded them. For example, in `@unnumbered The @cite{Book}', TeX + % expanded @cite (which turns out to cause errors because \cite is meant + % to be executed, not expanded). + % + % Anyway, we don't want the fully-expanded definition of @cite to appear + % as a result of the \message, we just want `@cite' itself. We use + % \the to achieve this: TeX expands \the only once, + % simply yielding the contents of . (We also do this for + % the toc entries.) + \toks0 = {#1}% + \message{(\the\toks0)}% + % + \chapmacro{#1}{Ynothing}{\the\unnumberedno}% + % + \global\let\section = \unnumberedsec + \global\let\subsection = \unnumberedsubsec + \global\let\subsubsection = \unnumberedsubsubsec +} + +% @centerchap is like @unnumbered, but the heading is centered. +\outer\parseargdef\centerchap{% + % Well, we could do the following in a group, but that would break + % an assumption that \chapmacro is called at the outermost level. + % Thus we are safer this way: --kasal, 24feb04 + \let\centerparametersmaybe = \centerparameters + \unnmhead0{#1}% + \let\centerparametersmaybe = \relax +} + +% @top is like @unnumbered. +\let\top\unnumbered + +% Sections. +\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz +\def\seczzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}% +} + +\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz +\def\appendixsectionzzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}% +} +\let\appendixsec\appendixsection + +\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz +\def\unnumberedseczzz#1{% + \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 + \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}% +} + +% Subsections. +\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz +\def\numberedsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}% +} + +\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz +\def\appendixsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Yappendix}% + {\appendixletter.\the\secno.\the\subsecno}% +} + +\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz +\def\unnumberedsubseczzz#1{% + \global\subsubsecno=0 \global\advance\subsecno by 1 + \sectionheading{#1}{subsec}{Ynothing}% + {\the\unnumberedno.\the\secno.\the\subsecno}% +} + +% Subsubsections. +\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz +\def\numberedsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Ynumbered}% + {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz +\def\appendixsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Yappendix}% + {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz +\def\unnumberedsubsubseczzz#1{% + \global\advance\subsubsecno by 1 + \sectionheading{#1}{subsubsec}{Ynothing}% + {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}% +} + +% These macros control what the section commands do, according +% to what kind of chapter we are in (ordinary, appendix, or unnumbered). +% Define them by default for a numbered chapter. +\let\section = \numberedsec +\let\subsection = \numberedsubsec +\let\subsubsection = \numberedsubsubsec + +% Define @majorheading, @heading and @subheading + +% NOTE on use of \vbox for chapter headings, section headings, and such: +% 1) We use \vbox rather than the earlier \line to permit +% overlong headings to fold. +% 2) \hyphenpenalty is set to 10000 because hyphenation in a +% heading is obnoxious; this forbids it. +% 3) Likewise, headings look best if no \parindent is used, and +% if justification is not attempted. Hence \raggedright. + + +\def\majorheading{% + {\advance\chapheadingskip by 10pt \chapbreak }% + \parsearg\chapheadingzzz +} + +\def\chapheading{\chapbreak \parsearg\chapheadingzzz} +\def\chapheadingzzz#1{% + {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\raggedright + \rm #1\hfill}}% + \bigskip \par\penalty 200\relax + \suppressfirstparagraphindent +} + +% @heading, @subheading, @subsubheading. +\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} +\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} +\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{} + \suppressfirstparagraphindent} + +% These macros generate a chapter, section, etc. heading only +% (including whitespace, linebreaking, etc. around it), +% given all the information in convenient, parsed form. + +%%% Args are the skip and penalty (usually negative) +\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} + +%%% Define plain chapter starts, and page on/off switching for it +% Parameter controlling skip before chapter headings (if needed) + +\newskip\chapheadingskip + +\def\chapbreak{\dobreak \chapheadingskip {-4000}} +\def\chappager{\par\vfill\supereject} +\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi} + +\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname} + +\def\CHAPPAGoff{% +\global\let\contentsalignmacro = \chappager +\global\let\pchapsepmacro=\chapbreak +\global\let\pagealignmacro=\chappager} + +\def\CHAPPAGon{% +\global\let\contentsalignmacro = \chappager +\global\let\pchapsepmacro=\chappager +\global\let\pagealignmacro=\chappager +\global\def\HEADINGSon{\HEADINGSsingle}} + +\def\CHAPPAGodd{% +\global\let\contentsalignmacro = \chapoddpage +\global\let\pchapsepmacro=\chapoddpage +\global\let\pagealignmacro=\chapoddpage +\global\def\HEADINGSon{\HEADINGSdouble}} + +\CHAPPAGon + +% Chapter opening. +% +% #1 is the text, #2 is the section type (Ynumbered, Ynothing, +% Yappendix, Yomitfromtoc), #3 the chapter number. +% +% To test against our argument. +\def\Ynothingkeyword{Ynothing} +\def\Yomitfromtockeyword{Yomitfromtoc} +\def\Yappendixkeyword{Yappendix} +% +\def\chapmacro#1#2#3{% + \pchapsepmacro + {% + \chapfonts \rm + % + % Have to define \thissection before calling \donoderef, because the + % xref code eventually uses it. On the other hand, it has to be called + % after \pchapsepmacro, or the headline will change too soon. + \gdef\thissection{#1}% + \gdef\thischaptername{#1}% + % + % Only insert the separating space if we have a chapter/appendix + % number, and don't print the unnumbered ``number''. + \def\temptype{#2}% + \ifx\temptype\Ynothingkeyword + \setbox0 = \hbox{}% + \def\toctype{unnchap}% + \gdef\thischapternum{}% + \gdef\thischapter{#1}% + \else\ifx\temptype\Yomitfromtockeyword + \setbox0 = \hbox{}% contents like unnumbered, but no toc entry + \def\toctype{omit}% + \gdef\thischapternum{}% + \gdef\thischapter{}% + \else\ifx\temptype\Yappendixkeyword + \setbox0 = \hbox{\putwordAppendix{} #3\enspace}% + \def\toctype{app}% + \xdef\thischapternum{\appendixletter}% + % We don't substitute the actual chapter name into \thischapter + % because we don't want its macros evaluated now. And we don't + % use \thissection because that changes with each section. + % + \xdef\thischapter{\putwordAppendix{} \appendixletter: + \noexpand\thischaptername}% + \else + \setbox0 = \hbox{#3\enspace}% + \def\toctype{numchap}% + \xdef\thischapternum{\the\chapno}% + \xdef\thischapter{\putwordChapter{} \the\chapno: + \noexpand\thischaptername}% + \fi\fi\fi + % + % Write the toc entry for this chapter. Must come before the + % \donoderef, because we include the current node name in the toc + % entry, and \donoderef resets it to empty. + \writetocentry{\toctype}{#1}{#3}% + % + % For pdftex, we have to write out the node definition (aka, make + % the pdfdest) after any page break, but before the actual text has + % been typeset. If the destination for the pdf outline is after the + % text, then jumping from the outline may wind up with the text not + % being visible, for instance under high magnification. + \donoderef{#2}% + % + % Typeset the actual heading. + \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright + \hangindent=\wd0 \centerparametersmaybe + \unhbox0 #1\par}% + }% + \nobreak\bigskip % no page break after a chapter title + \nobreak +} + +% @centerchap -- centered and unnumbered. +\let\centerparametersmaybe = \relax +\def\centerparameters{% + \advance\rightskip by 3\rightskip + \leftskip = \rightskip + \parfillskip = 0pt +} + + +% I don't think this chapter style is supported any more, so I'm not +% updating it with the new noderef stuff. We'll see. --karl, 11aug03. +% +\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} +% +\def\unnchfopen #1{% +\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt\raggedright + \rm #1\hfill}}\bigskip \par\nobreak +} +\def\chfopen #1#2{\chapoddpage {\chapfonts +\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% +\par\penalty 5000 % +} +\def\centerchfopen #1{% +\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 + \parindent=0pt + \hfill {\rm #1}\hfill}}\bigskip \par\nobreak +} +\def\CHAPFopen{% + \global\let\chapmacro=\chfopen + \global\let\centerchapmacro=\centerchfopen} + + +% Section titles. These macros combine the section number parts and +% call the generic \sectionheading to do the printing. +% +\newskip\secheadingskip +\def\secheadingbreak{\dobreak \secheadingskip{-1000}} + +% Subsection titles. +\newskip\subsecheadingskip +\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}} + +% Subsubsection titles. +\def\subsubsecheadingskip{\subsecheadingskip} +\def\subsubsecheadingbreak{\subsecheadingbreak} + + +% Print any size, any type, section title. +% +% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is +% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the +% section number. +% +\def\sectionheading#1#2#3#4{% + {% + % Switch to the right set of fonts. + \csname #2fonts\endcsname \rm + % + % Insert space above the heading. + \csname #2headingbreak\endcsname + % + % Only insert the space after the number if we have a section number. + \def\sectionlevel{#2}% + \def\temptype{#3}% + % + \ifx\temptype\Ynothingkeyword + \setbox0 = \hbox{}% + \def\toctype{unn}% + \gdef\thissection{#1}% + \else\ifx\temptype\Yomitfromtockeyword + % for @headings -- no section number, don't include in toc, + % and don't redefine \thissection. + \setbox0 = \hbox{}% + \def\toctype{omit}% + \let\sectionlevel=\empty + \else\ifx\temptype\Yappendixkeyword + \setbox0 = \hbox{#4\enspace}% + \def\toctype{app}% + \gdef\thissection{#1}% + \else + \setbox0 = \hbox{#4\enspace}% + \def\toctype{num}% + \gdef\thissection{#1}% + \fi\fi\fi + % + % Write the toc entry (before \donoderef). See comments in \chapmacro. + \writetocentry{\toctype\sectionlevel}{#1}{#4}% + % + % Write the node reference (= pdf destination for pdftex). + % Again, see comments in \chapmacro. + \donoderef{#3}% + % + % Interline glue will be inserted when the vbox is completed. + % That glue will be a valid breakpoint for the page, since it'll be + % preceded by a whatsit (usually from the \donoderef, or from the + % \writetocentry if there was no node). We don't want to allow that + % break, since then the whatsits could end up on page n while the + % section is on page n+1, thus toc/etc. are wrong. Debian bug 276000. + \nobreak + % + % Output the actual section heading. + \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright + \hangindent=\wd0 % zero if no section number + \unhbox0 #1}% + }% + % Add extra space after the heading -- half of whatever came above it. + % Don't allow stretch, though. + \kern .5 \csname #2headingskip\endcsname + % + % Do not let the kern be a potential breakpoint, as it would be if it + % was followed by glue. + \nobreak + % + % We'll almost certainly start a paragraph next, so don't let that + % glue accumulate. (Not a breakpoint because it's preceded by a + % discardable item.) + \vskip-\parskip + % + % This is purely so the last item on the list is a known \penalty > + % 10000. This is so \startdefun can avoid allowing breakpoints after + % section headings. Otherwise, it would insert a valid breakpoint between: + % + % @section sec-whatever + % @deffn def-whatever + \penalty 10001 +} + + +\message{toc,} +% Table of contents. +\newwrite\tocfile + +% Write an entry to the toc file, opening it if necessary. +% Called from @chapter, etc. +% +% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno} +% We append the current node name (if any) and page number as additional +% arguments for the \{chap,sec,...}entry macros which will eventually +% read this. The node name is used in the pdf outlines as the +% destination to jump to. +% +% We open the .toc file for writing here instead of at @setfilename (or +% any other fixed time) so that @contents can be anywhere in the document. +% But if #1 is `omit', then we don't do anything. This is used for the +% table of contents chapter openings themselves. +% +\newif\iftocfileopened +\def\omitkeyword{omit}% +% +\def\writetocentry#1#2#3{% + \edef\writetoctype{#1}% + \ifx\writetoctype\omitkeyword \else + \iftocfileopened\else + \immediate\openout\tocfile = \jobname.toc + \global\tocfileopenedtrue + \fi + % + \iflinks + {\atdummies + \edef\temp{% + \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}% + \temp + }% + \fi + \fi + % + % Tell \shipout to create a pdf destination on each page, if we're + % writing pdf. These are used in the table of contents. We can't + % just write one on every page because the title pages are numbered + % 1 and 2 (the page numbers aren't printed), and so are the first + % two pages of the document. Thus, we'd have two destinations named + % `1', and two named `2'. + \ifpdf \global\pdfmakepagedesttrue \fi +} + + +% These characters do not print properly in the Computer Modern roman +% fonts, so we must take special care. This is more or less redundant +% with the Texinfo input format setup at the end of this file. +% +\def\activecatcodes{% + \catcode`\"=\active + \catcode`\$=\active + \catcode`\<=\active + \catcode`\>=\active + \catcode`\\=\active + \catcode`\^=\active + \catcode`\_=\active + \catcode`\|=\active + \catcode`\~=\active +} + + +% Read the toc file, which is essentially Texinfo input. +\def\readtocfile{% + \setupdatafile + \activecatcodes + \input \jobname.toc +} + +\newskip\contentsrightmargin \contentsrightmargin=1in +\newcount\savepageno +\newcount\lastnegativepageno \lastnegativepageno = -1 + +% Prepare to read what we've written to \tocfile. +% +\def\startcontents#1{% + % If @setchapternewpage on, and @headings double, the contents should + % start on an odd page, unlike chapters. Thus, we maintain + % \contentsalignmacro in parallel with \pagealignmacro. + % From: Torbjorn Granlund + \contentsalignmacro + \immediate\closeout\tocfile + % + % Don't need to put `Contents' or `Short Contents' in the headline. + % It is abundantly clear what they are. + \def\thischapter{}% + \chapmacro{#1}{Yomitfromtoc}{}% + % + \savepageno = \pageno + \begingroup % Set up to handle contents files properly. + \raggedbottom % Worry more about breakpoints than the bottom. + \advance\hsize by -\contentsrightmargin % Don't use the full line length. + % + % Roman numerals for page numbers. + \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi +} + + +% Normal (long) toc. +\def\contents{% + \startcontents{\putwordTOC}% + \openin 1 \jobname.toc + \ifeof 1 \else + \readtocfile + \fi + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \ifeof 1 \else + \pdfmakeoutlines + \fi + \closein 1 + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno +} + +% And just the chapters. +\def\summarycontents{% + \startcontents{\putwordShortTOC}% + % + \let\numchapentry = \shortchapentry + \let\appentry = \shortchapentry + \let\unnchapentry = \shortunnchapentry + % We want a true roman here for the page numbers. + \secfonts + \let\rm=\shortcontrm \let\bf=\shortcontbf + \let\sl=\shortcontsl \let\tt=\shortconttt + \rm + \hyphenpenalty = 10000 + \advance\baselineskip by 1pt % Open it up a little. + \def\numsecentry##1##2##3##4{} + \let\appsecentry = \numsecentry + \let\unnsecentry = \numsecentry + \let\numsubsecentry = \numsecentry + \let\appsubsecentry = \numsecentry + \let\unnsubsecentry = \numsecentry + \let\numsubsubsecentry = \numsecentry + \let\appsubsubsecentry = \numsecentry + \let\unnsubsubsecentry = \numsecentry + \openin 1 \jobname.toc + \ifeof 1 \else + \readtocfile + \fi + \closein 1 + \vfill \eject + \contentsalignmacro % in case @setchapternewpage odd is in effect + \endgroup + \lastnegativepageno = \pageno + \global\pageno = \savepageno +} +\let\shortcontents = \summarycontents + +% Typeset the label for a chapter or appendix for the short contents. +% The arg is, e.g., `A' for an appendix, or `3' for a chapter. +% +\def\shortchaplabel#1{% + % This space should be enough, since a single number is .5em, and the + % widest letter (M) is 1em, at least in the Computer Modern fonts. + % But use \hss just in case. + % (This space doesn't include the extra space that gets added after + % the label; that gets put in by \shortchapentry above.) + % + % We'd like to right-justify chapter numbers, but that looks strange + % with appendix letters. And right-justifying numbers and + % left-justifying letters looks strange when there is less than 10 + % chapters. Have to read the whole toc once to know how many chapters + % there are before deciding ... + \hbox to 1em{#1\hss}% +} + +% These macros generate individual entries in the table of contents. +% The first argument is the chapter or section name. +% The last argument is the page number. +% The arguments in between are the chapter number, section number, ... + +% Chapters, in the main contents. +\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}} +% +% Chapters, in the short toc. +% See comments in \dochapentry re vbox and related settings. +\def\shortchapentry#1#2#3#4{% + \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}% +} + +% Appendices, in the main contents. +% Need the word Appendix, and a fixed-size box. +% +\def\appendixbox#1{% + % We use M since it's probably the widest letter. + \setbox0 = \hbox{\putwordAppendix{} M}% + \hbox to \wd0{\putwordAppendix{} #1\hss}} +% +\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}} + +% Unnumbered chapters. +\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}} +\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}} + +% Sections. +\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}} +\let\appsecentry=\numsecentry +\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}} + +% Subsections. +\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}} +\let\appsubsecentry=\numsubsecentry +\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}} + +% And subsubsections. +\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}} +\let\appsubsubsecentry=\numsubsubsecentry +\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}} + +% This parameter controls the indentation of the various levels. +% Same as \defaultparindent. +\newdimen\tocindent \tocindent = 15pt + +% Now for the actual typesetting. In all these, #1 is the text and #2 is the +% page number. +% +% If the toc has to be broken over pages, we want it to be at chapters +% if at all possible; hence the \penalty. +\def\dochapentry#1#2{% + \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip + \begingroup + \chapentryfonts + \tocentry{#1}{\dopageno\bgroup#2\egroup}% + \endgroup + \nobreak\vskip .25\baselineskip plus.1\baselineskip +} + +\def\dosecentry#1#2{\begingroup + \secentryfonts \leftskip=\tocindent + \tocentry{#1}{\dopageno\bgroup#2\egroup}% +\endgroup} + +\def\dosubsecentry#1#2{\begingroup + \subsecentryfonts \leftskip=2\tocindent + \tocentry{#1}{\dopageno\bgroup#2\egroup}% +\endgroup} + +\def\dosubsubsecentry#1#2{\begingroup + \subsubsecentryfonts \leftskip=3\tocindent + \tocentry{#1}{\dopageno\bgroup#2\egroup}% +\endgroup} + +% We use the same \entry macro as for the index entries. +\let\tocentry = \entry + +% Space between chapter (or whatever) number and the title. +\def\labelspace{\hskip1em \relax} + +\def\dopageno#1{{\rm #1}} +\def\doshortpageno#1{{\rm #1}} + +\def\chapentryfonts{\secfonts \rm} +\def\secentryfonts{\textfonts} +\def\subsecentryfonts{\textfonts} +\def\subsubsecentryfonts{\textfonts} + + +\message{environments,} +% @foo ... @end foo. + +% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. +% +% Since these characters are used in examples, it should be an even number of +% \tt widths. Each \tt character is 1en, so two makes it 1em. +% +\def\point{$\star$} +\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} +\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}} +\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} +\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}} + +% The @error{} command. +% Adapted from the TeXbook's \boxit. +% +\newbox\errorbox +% +{\tentt \global\dimen0 = 3em}% Width of the box. +\dimen2 = .55pt % Thickness of rules +% The text. (`r' is open on the right, `e' somewhat less so on the left.) +\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt} +% +\setbox\errorbox=\hbox to \dimen0{\hfil + \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. + \advance\hsize by -2\dimen2 % Rules. + \vbox{% + \hrule height\dimen2 + \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. + \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. + \kern3pt\vrule width\dimen2}% Space to right. + \hrule height\dimen2} + \hfil} +% +\def\error{\leavevmode\lower.7ex\copy\errorbox} + +% @tex ... @end tex escapes into raw Tex temporarily. +% One exception: @ is still an escape character, so that @end tex works. +% But \@ or @@ will get a plain tex @ character. + +\envdef\tex{% + \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 + \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 + \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie + \catcode `\%=14 + \catcode `\+=\other + \catcode `\"=\other + \catcode `\|=\other + \catcode `\<=\other + \catcode `\>=\other + \escapechar=`\\ + % + \let\b=\ptexb + \let\bullet=\ptexbullet + \let\c=\ptexc + \let\,=\ptexcomma + \let\.=\ptexdot + \let\dots=\ptexdots + \let\equiv=\ptexequiv + \let\!=\ptexexclam + \let\i=\ptexi + \let\indent=\ptexindent + \let\noindent=\ptexnoindent + \let\{=\ptexlbrace + \let\+=\tabalign + \let\}=\ptexrbrace + \let\/=\ptexslash + \let\*=\ptexstar + \let\t=\ptext + \let\frenchspacing=\plainfrenchspacing + % + \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% + \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% + \def\@{@}% +} +% There is no need to define \Etex. + +% Define @lisp ... @end lisp. +% @lisp environment forms a group so it can rebind things, +% including the definition of @end lisp (which normally is erroneous). + +% Amount to narrow the margins by for @lisp. +\newskip\lispnarrowing \lispnarrowing=0.4in + +% This is the definition that ^^M gets inside @lisp, @example, and other +% such environments. \null is better than a space, since it doesn't +% have any width. +\def\lisppar{\null\endgraf} + +% This space is always present above and below environments. +\newskip\envskipamount \envskipamount = 0pt + +% Make spacing and below environment symmetrical. We use \parskip here +% to help in doing that, since in @example-like environments \parskip +% is reset to zero; thus the \afterenvbreak inserts no space -- but the +% start of the next paragraph will insert \parskip. +% +\def\aboveenvbreak{{% + % =10000 instead of <10000 because of a special case in \itemzzz and + % \sectionheading, q.v. + \ifnum \lastpenalty=10000 \else + \advance\envskipamount by \parskip + \endgraf + \ifdim\lastskip<\envskipamount + \removelastskip + % it's not a good place to break if the last penalty was \nobreak + % or better ... + \ifnum\lastpenalty<10000 \penalty-50 \fi + \vskip\envskipamount + \fi + \fi +}} + +\let\afterenvbreak = \aboveenvbreak + +% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins; it will +% also clear it, so that its embedded environments do the narrowing again. +\let\nonarrowing=\relax + +% @cartouche ... @end cartouche: draw rectangle w/rounded corners around +% environment contents. +\font\circle=lcircle10 +\newdimen\circthick +\newdimen\cartouter\newdimen\cartinner +\newskip\normbskip\newskip\normpskip\newskip\normlskip +\circthick=\fontdimen8\circle +% +\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth +\def\ctr{{\hskip 6pt\circle\char'010}} +\def\cbl{{\circle\char'012\hskip -6pt}} +\def\cbr{{\hskip 6pt\circle\char'011}} +\def\carttop{\hbox to \cartouter{\hskip\lskip + \ctl\leaders\hrule height\circthick\hfil\ctr + \hskip\rskip}} +\def\cartbot{\hbox to \cartouter{\hskip\lskip + \cbl\leaders\hrule height\circthick\hfil\cbr + \hskip\rskip}} +% +\newskip\lskip\newskip\rskip + +\envdef\cartouche{% + \ifhmode\par\fi % can't be in the midst of a paragraph. + \startsavinginserts + \lskip=\leftskip \rskip=\rightskip + \leftskip=0pt\rightskip=0pt % we want these *outside*. + \cartinner=\hsize \advance\cartinner by-\lskip + \advance\cartinner by-\rskip + \cartouter=\hsize + \advance\cartouter by 18.4pt % allow for 3pt kerns on either + % side, and for 6pt waste from + % each corner char, and rule thickness + \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip + % Flag to tell @lisp, etc., not to narrow margin. + \let\nonarrowing = t% + \vbox\bgroup + \baselineskip=0pt\parskip=0pt\lineskip=0pt + \carttop + \hbox\bgroup + \hskip\lskip + \vrule\kern3pt + \vbox\bgroup + \kern3pt + \hsize=\cartinner + \baselineskip=\normbskip + \lineskip=\normlskip + \parskip=\normpskip + \vskip -\parskip + \comment % For explanation, see the end of \def\group. +} +\def\Ecartouche{% + \ifhmode\par\fi + \kern3pt + \egroup + \kern3pt\vrule + \hskip\rskip + \egroup + \cartbot + \egroup + \checkinserts +} + + +% This macro is called at the beginning of all the @example variants, +% inside a group. +\def\nonfillstart{% + \aboveenvbreak + \hfuzz = 12pt % Don't be fussy + \sepspaces % Make spaces be word-separators rather than space tokens. + \let\par = \lisppar % don't ignore blank lines + \obeylines % each line of input is a line of output + \parskip = 0pt + \parindent = 0pt + \emergencystretch = 0pt % don't try to avoid overfull boxes + \ifx\nonarrowing\relax + \advance \leftskip by \lispnarrowing + \exdentamount=\lispnarrowing + \else + \let\nonarrowing = \relax + \fi + \let\exdent=\nofillexdent +} + +% If you want all examples etc. small: @set dispenvsize small. +% If you want even small examples the full size: @set dispenvsize nosmall. +% This affects the following displayed environments: +% @example, @display, @format, @lisp +% +\def\smallword{small} +\def\nosmallword{nosmall} +\let\SETdispenvsize\relax +\def\setnormaldispenv{% + \ifx\SETdispenvsize\smallword + % end paragraph for sake of leading, in case document has no blank + % line. This is redundant with what happens in \aboveenvbreak, but + % we need to do it before changing the fonts, and it's inconvenient + % to change the fonts afterward. + \ifnum \lastpenalty=10000 \else \endgraf \fi + \smallexamplefonts \rm + \fi +} +\def\setsmalldispenv{% + \ifx\SETdispenvsize\nosmallword + \else + \ifnum \lastpenalty=10000 \else \endgraf \fi + \smallexamplefonts \rm + \fi +} + +% We often define two environments, @foo and @smallfoo. +% Let's do it by one command: +\def\makedispenv #1#2{ + \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2} + \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2} + \expandafter\let\csname E#1\endcsname \afterenvbreak + \expandafter\let\csname Esmall#1\endcsname \afterenvbreak +} + +% Define two synonyms: +\def\maketwodispenvs #1#2#3{ + \makedispenv{#1}{#3} + \makedispenv{#2}{#3} +} + +% @lisp: indented, narrowed, typewriter font; @example: same as @lisp. +% +% @smallexample and @smalllisp: use smaller fonts. +% Originally contributed by Pavel@xerox. +% +\maketwodispenvs {lisp}{example}{% + \nonfillstart + \tt\quoteexpand + \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. + \gobble % eat return +} +% @display/@smalldisplay: same as @lisp except keep current font. +% +\makedispenv {display}{% + \nonfillstart + \gobble +} + +% @format/@smallformat: same as @display except don't narrow margins. +% +\makedispenv{format}{% + \let\nonarrowing = t% + \nonfillstart + \gobble +} + +% @flushleft: same as @format, but doesn't obey \SETdispenvsize. +\envdef\flushleft{% + \let\nonarrowing = t% + \nonfillstart + \gobble +} +\let\Eflushleft = \afterenvbreak + +% @flushright. +% +\envdef\flushright{% + \let\nonarrowing = t% + \nonfillstart + \advance\leftskip by 0pt plus 1fill + \gobble +} +\let\Eflushright = \afterenvbreak + + +% @quotation does normal linebreaking (hence we can't use \nonfillstart) +% and narrows the margins. We keep \parskip nonzero in general, since +% we're doing normal filling. So, when using \aboveenvbreak and +% \afterenvbreak, temporarily make \parskip 0. +% +\envdef\quotation{% + {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip + \parindent=0pt + % + % @cartouche defines \nonarrowing to inhibit narrowing at next level down. + \ifx\nonarrowing\relax + \advance\leftskip by \lispnarrowing + \advance\rightskip by \lispnarrowing + \exdentamount = \lispnarrowing + \else + \let\nonarrowing = \relax + \fi + \parsearg\quotationlabel +} + +% We have retained a nonzero parskip for the environment, since we're +% doing normal filling. +% +\def\Equotation{% + \par + \ifx\quotationauthor\undefined\else + % indent a bit. + \leftline{\kern 2\leftskip \sl ---\quotationauthor}% + \fi + {\parskip=0pt \afterenvbreak}% +} + +% If we're given an argument, typeset it in bold with a colon after. +\def\quotationlabel#1{% + \def\temp{#1}% + \ifx\temp\empty \else + {\bf #1: }% + \fi +} + + +% LaTeX-like @verbatim...@end verbatim and @verb{...} +% If we want to allow any as delimiter, +% we need the curly braces so that makeinfo sees the @verb command, eg: +% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org +% +% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook. +% +% [Knuth] p.344; only we need to do the other characters Texinfo sets +% active too. Otherwise, they get lost as the first character on a +% verbatim line. +\def\dospecials{% + \do\ \do\\\do\{\do\}\do\$\do\&% + \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~% + \do\<\do\>\do\|\do\@\do+\do\"% +} +% +% [Knuth] p. 380 +\def\uncatcodespecials{% + \def\do##1{\catcode`##1=\other}\dospecials} +% +% [Knuth] pp. 380,381,391 +% Disable Spanish ligatures ?` and !` of \tt font +\begingroup + \catcode`\`=\active\gdef`{\relax\lq} +\endgroup +% +% Setup for the @verb command. +% +% Eight spaces for a tab +\begingroup + \catcode`\^^I=\active + \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }} +\endgroup +% +\def\setupverb{% + \tt % easiest (and conventionally used) font for verbatim + \def\par{\leavevmode\endgraf}% + \catcode`\`=\active + \tabeightspaces + % Respect line breaks, + % print special symbols as themselves, and + % make each space count + % must do in this order: + \obeylines \uncatcodespecials \sepspaces +} + +% Setup for the @verbatim environment +% +% Real tab expansion +\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount +% +\def\starttabbox{\setbox0=\hbox\bgroup} + +% Allow an option to not replace quotes with a regular directed right +% quote/apostrophe (char 0x27), but instead use the undirected quote +% from cmtt (char 0x0d). The undirected quote is ugly, so don't make it +% the default, but it works for pasting with more pdf viewers (at least +% evince), the lilypond developers report. xpdf does work with the +% regular 0x27. +% +\def\codequoteright{% + \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax + '% + \else + \char'15 + \fi +} +% +% and a similar option for the left quote char vs. a grave accent. +% Modern fonts display ASCII 0x60 as a grave accent, so some people like +% the code environments to do likewise. +% +\def\codequoteleft{% + \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax + `% + \else + \char'22 + \fi +} +% +\begingroup + \catcode`\^^I=\active + \gdef\tabexpand{% + \catcode`\^^I=\active + \def^^I{\leavevmode\egroup + \dimen0=\wd0 % the width so far, or since the previous tab + \divide\dimen0 by\tabw + \multiply\dimen0 by\tabw % compute previous multiple of \tabw + \advance\dimen0 by\tabw % advance to next multiple of \tabw + \wd0=\dimen0 \box0 \starttabbox + }% + } + \catcode`\'=\active + \gdef\rquoteexpand{\catcode\rquoteChar=\active \def'{\codequoteright}}% + % + \catcode`\`=\active + \gdef\lquoteexpand{\catcode\lquoteChar=\active \def`{\codequoteleft}}% + % + \gdef\quoteexpand{\rquoteexpand \lquoteexpand}% +\endgroup + +% start the verbatim environment. +\def\setupverbatim{% + \let\nonarrowing = t% + \nonfillstart + % Easiest (and conventionally used) font for verbatim + \tt + \def\par{\leavevmode\egroup\box0\endgraf}% + \catcode`\`=\active + \tabexpand + \quoteexpand + % Respect line breaks, + % print special symbols as themselves, and + % make each space count + % must do in this order: + \obeylines \uncatcodespecials \sepspaces + \everypar{\starttabbox}% +} + +% Do the @verb magic: verbatim text is quoted by unique +% delimiter characters. Before first delimiter expect a +% right brace, after last delimiter expect closing brace: +% +% \def\doverb'{'#1'}'{#1} +% +% [Knuth] p. 382; only eat outer {} +\begingroup + \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other + \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next] +\endgroup +% +\def\verb{\begingroup\setupverb\doverb} +% +% +% Do the @verbatim magic: define the macro \doverbatim so that +% the (first) argument ends when '@end verbatim' is reached, ie: +% +% \def\doverbatim#1@end verbatim{#1} +% +% For Texinfo it's a lot easier than for LaTeX, +% because texinfo's \verbatim doesn't stop at '\end{verbatim}': +% we need not redefine '\', '{' and '}'. +% +% Inspired by LaTeX's verbatim command set [latex.ltx] +% +\begingroup + \catcode`\ =\active + \obeylines % + % ignore everything up to the first ^^M, that's the newline at the end + % of the @verbatim input line itself. Otherwise we get an extra blank + % line in the output. + \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}% + % We really want {...\end verbatim} in the body of the macro, but + % without the active space; thus we have to use \xdef and \gobble. +\endgroup +% +\envdef\verbatim{% + \setupverbatim\doverbatim +} +\let\Everbatim = \afterenvbreak + + +% @verbatiminclude FILE - insert text of file in verbatim environment. +% +\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude} +% +\def\doverbatiminclude#1{% + {% + \makevalueexpandable + \setupverbatim + \input #1 + \afterenvbreak + }% +} + +% @copying ... @end copying. +% Save the text away for @insertcopying later. +% +% We save the uninterpreted tokens, rather than creating a box. +% Saving the text in a box would be much easier, but then all the +% typesetting commands (@smallbook, font changes, etc.) have to be done +% beforehand -- and a) we want @copying to be done first in the source +% file; b) letting users define the frontmatter in as flexible order as +% possible is very desirable. +% +\def\copying{\checkenv{}\begingroup\scanargctxt\docopying} +\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}} +% +\def\insertcopying{% + \begingroup + \parindent = 0pt % paragraph indentation looks wrong on title page + \scanexp\copyingtext + \endgroup +} + + +\message{defuns,} +% @defun etc. + +\newskip\defbodyindent \defbodyindent=.4in +\newskip\defargsindent \defargsindent=50pt +\newskip\deflastargmargin \deflastargmargin=18pt +\newcount\defunpenalty + +% Start the processing of @deffn: +\def\startdefun{% + \ifnum\lastpenalty<10000 + \medbreak + \defunpenalty=10003 % Will keep this @deffn together with the + % following @def command, see below. + \else + % If there are two @def commands in a row, we'll have a \nobreak, + % which is there to keep the function description together with its + % header. But if there's nothing but headers, we need to allow a + % break somewhere. Check specifically for penalty 10002, inserted + % by \printdefunline, instead of 10000, since the sectioning + % commands also insert a nobreak penalty, and we don't want to allow + % a break between a section heading and a defun. + % + % As a minor refinement, we avoid "club" headers by signalling + % with penalty of 10003 after the very first @deffn in the + % sequence (see above), and penalty of 10002 after any following + % @def command. + \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi + % + % Similarly, after a section heading, do not allow a break. + % But do insert the glue. + \medskip % preceded by discardable penalty, so not a breakpoint + \fi + % + \parindent=0in + \advance\leftskip by \defbodyindent + \exdentamount=\defbodyindent +} + +\def\dodefunx#1{% + % First, check whether we are in the right environment: + \checkenv#1% + % + % As above, allow line break if we have multiple x headers in a row. + % It's not a great place, though. + \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi + % + % And now, it's time to reuse the body of the original defun: + \expandafter\gobbledefun#1% +} +\def\gobbledefun#1\startdefun{} + +% \printdefunline \deffnheader{text} +% +\def\printdefunline#1#2{% + \begingroup + % call \deffnheader: + #1#2 \endheader + % common ending: + \interlinepenalty = 10000 + \advance\rightskip by 0pt plus 1fil + \endgraf + \nobreak\vskip -\parskip + \penalty\defunpenalty % signal to \startdefun and \dodefunx + % Some of the @defun-type tags do not enable magic parentheses, + % rendering the following check redundant. But we don't optimize. + \checkparencounts + \endgroup +} + +\def\Edefun{\endgraf\medbreak} + +% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn; +% the only thing remainnig is to define \deffnheader. +% +\def\makedefun#1{% + \expandafter\let\csname E#1\endcsname = \Edefun + \edef\temp{\noexpand\domakedefun + \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}% + \temp +} + +% \domakedefun \deffn \deffnx \deffnheader +% +% Define \deffn and \deffnx, without parameters. +% \deffnheader has to be defined explicitly. +% +\def\domakedefun#1#2#3{% + \envdef#1{% + \startdefun + \parseargusing\activeparens{\printdefunline#3}% + }% + \def#2{\dodefunx#1}% + \def#3% +} + +%%% Untyped functions: + +% @deffn category name args +\makedefun{deffn}{\deffngeneral{}} + +% @deffn category class name args +\makedefun{defop}#1 {\defopon{#1\ \putwordon}} + +% \defopon {category on}class name args +\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } + +% \deffngeneral {subind}category name args +% +\def\deffngeneral#1#2 #3 #4\endheader{% + % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}. + \dosubind{fn}{\code{#3}}{#1}% + \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}% +} + +%%% Typed functions: + +% @deftypefn category type name args +\makedefun{deftypefn}{\deftypefngeneral{}} + +% @deftypeop category class type name args +\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}} + +% \deftypeopon {category on}class type name args +\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } + +% \deftypefngeneral {subind}category type name args +% +\def\deftypefngeneral#1#2 #3 #4 #5\endheader{% + \dosubind{fn}{\code{#4}}{#1}% + \defname{#2}{#3}{#4}\defunargs{#5\unskip}% +} + +%%% Typed variables: + +% @deftypevr category type var args +\makedefun{deftypevr}{\deftypecvgeneral{}} + +% @deftypecv category class type var args +\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}} + +% \deftypecvof {category of}class type var args +\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} } + +% \deftypecvgeneral {subind}category type var args +% +\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{% + \dosubind{vr}{\code{#4}}{#1}% + \defname{#2}{#3}{#4}\defunargs{#5\unskip}% +} + +%%% Untyped variables: + +% @defvr category var args +\makedefun{defvr}#1 {\deftypevrheader{#1} {} } + +% @defcv category class var args +\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}} + +% \defcvof {category of}class var args +\def\defcvof#1#2 {\deftypecvof{#1}#2 {} } + +%%% Type: +% @deftp category name args +\makedefun{deftp}#1 #2 #3\endheader{% + \doind{tp}{\code{#2}}% + \defname{#1}{}{#2}\defunargs{#3\unskip}% +} + +% Remaining @defun-like shortcuts: +\makedefun{defun}{\deffnheader{\putwordDeffunc} } +\makedefun{defmac}{\deffnheader{\putwordDefmac} } +\makedefun{defspec}{\deffnheader{\putwordDefspec} } +\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} } +\makedefun{defvar}{\defvrheader{\putwordDefvar} } +\makedefun{defopt}{\defvrheader{\putwordDefopt} } +\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} } +\makedefun{defmethod}{\defopon\putwordMethodon} +\makedefun{deftypemethod}{\deftypeopon\putwordMethodon} +\makedefun{defivar}{\defcvof\putwordInstanceVariableof} +\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof} + +% \defname, which formats the name of the @def (not the args). +% #1 is the category, such as "Function". +% #2 is the return type, if any. +% #3 is the function name. +% +% We are followed by (but not passed) the arguments, if any. +% +\def\defname#1#2#3{% + % Get the values of \leftskip and \rightskip as they were outside the @def... + \advance\leftskip by -\defbodyindent + % + % How we'll format the type name. Putting it in brackets helps + % distinguish it from the body text that may end up on the next line + % just below it. + \def\temp{#1}% + \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi} + % + % Figure out line sizes for the paragraph shape. + % The first line needs space for \box0; but if \rightskip is nonzero, + % we need only space for the part of \box0 which exceeds it: + \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip + % The continuations: + \dimen2=\hsize \advance\dimen2 by -\defargsindent + % (plain.tex says that \dimen1 should be used only as global.) + \parshape 2 0in \dimen0 \defargsindent \dimen2 + % + % Put the type name to the right margin. + \noindent + \hbox to 0pt{% + \hfil\box0 \kern-\hsize + % \hsize has to be shortened this way: + \kern\leftskip + % Intentionally do not respect \rightskip, since we need the space. + }% + % + % Allow all lines to be underfull without complaint: + \tolerance=10000 \hbadness=10000 + \exdentamount=\defbodyindent + {% + % defun fonts. We use typewriter by default (used to be bold) because: + % . we're printing identifiers, they should be in tt in principle. + % . in languages with many accents, such as Czech or French, it's + % common to leave accents off identifiers. The result looks ok in + % tt, but exceedingly strange in rm. + % . we don't want -- and --- to be treated as ligatures. + % . this still does not fix the ?` and !` ligatures, but so far no + % one has made identifiers using them :). + \df \tt + \def\temp{#2}% return value type + \ifx\temp\empty\else \tclose{\temp} \fi + #3% output function name + }% + {\rm\enskip}% hskip 0.5 em of \tenrm + % + \boldbrax + % arguments will be output next, if any. +} + +% Print arguments in slanted roman (not ttsl), inconsistently with using +% tt for the name. This is because literal text is sometimes needed in +% the argument list (groff manual), and ttsl and tt are not very +% distinguishable. Prevent hyphenation at `-' chars. +% +\def\defunargs#1{% + % use sl by default (not ttsl), + % tt for the names. + \df \sl \hyphenchar\font=0 + % + % On the other hand, if an argument has two dashes (for instance), we + % want a way to get ttsl. Let's try @var for that. + \let\var=\ttslanted + #1% + \sl\hyphenchar\font=45 +} + +% We want ()&[] to print specially on the defun line. +% +\def\activeparens{% + \catcode`\(=\active \catcode`\)=\active + \catcode`\[=\active \catcode`\]=\active + \catcode`\&=\active +} + +% Make control sequences which act like normal parenthesis chars. +\let\lparen = ( \let\rparen = ) + +% Be sure that we always have a definition for `(', etc. For example, +% if the fn name has parens in it, \boldbrax will not be in effect yet, +% so TeX would otherwise complain about undefined control sequence. +{ + \activeparens + \global\let(=\lparen \global\let)=\rparen + \global\let[=\lbrack \global\let]=\rbrack + \global\let& = \& + + \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} + \gdef\magicamp{\let&=\amprm} +} + +\newcount\parencount + +% If we encounter &foo, then turn on ()-hacking afterwards +\newif\ifampseen +\def\amprm#1 {\ampseentrue{\bf\ }} + +\def\parenfont{% + \ifampseen + % At the first level, print parens in roman, + % otherwise use the default font. + \ifnum \parencount=1 \rm \fi + \else + % The \sf parens (in \boldbrax) actually are a little bolder than + % the contained text. This is especially needed for [ and ] . + \sf + \fi +} +\def\infirstlevel#1{% + \ifampseen + \ifnum\parencount=1 + #1% + \fi + \fi +} +\def\bfafterword#1 {#1 \bf} + +\def\opnr{% + \global\advance\parencount by 1 + {\parenfont(}% + \infirstlevel \bfafterword +} +\def\clnr{% + {\parenfont)}% + \infirstlevel \sl + \global\advance\parencount by -1 +} + +\newcount\brackcount +\def\lbrb{% + \global\advance\brackcount by 1 + {\bf[}% +} +\def\rbrb{% + {\bf]}% + \global\advance\brackcount by -1 +} + +\def\checkparencounts{% + \ifnum\parencount=0 \else \badparencount \fi + \ifnum\brackcount=0 \else \badbrackcount \fi +} +\def\badparencount{% + \errmessage{Unbalanced parentheses in @def}% + \global\parencount=0 +} +\def\badbrackcount{% + \errmessage{Unbalanced square braces in @def}% + \global\brackcount=0 +} + + +\message{macros,} +% @macro. + +% To do this right we need a feature of e-TeX, \scantokens, +% which we arrange to emulate with a temporary file in ordinary TeX. +\ifx\eTeXversion\undefined + \newwrite\macscribble + \def\scantokens#1{% + \toks0={#1}% + \immediate\openout\macscribble=\jobname.tmp + \immediate\write\macscribble{\the\toks0}% + \immediate\closeout\macscribble + \input \jobname.tmp + } +\fi + +\def\scanmacro#1{% + \begingroup + \newlinechar`\^^M + \let\xeatspaces\eatspaces + % Undo catcode changes of \startcontents and \doprintindex + % When called from @insertcopying or (short)caption, we need active + % backslash to get it printed correctly. Previously, we had + % \catcode`\\=\other instead. We'll see whether a problem appears + % with macro expansion. --kasal, 19aug04 + \catcode`\@=0 \catcode`\\=\active \escapechar=`\@ + % ... and \example + \spaceisspace + % + % Append \endinput to make sure that TeX does not see the ending newline. + % I've verified that it is necessary both for e-TeX and for ordinary TeX + % --kasal, 29nov03 + \scantokens{#1\endinput}% + \endgroup +} + +\def\scanexp#1{% + \edef\temp{\noexpand\scanmacro{#1}}% + \temp +} + +\newcount\paramno % Count of parameters +\newtoks\macname % Macro name +\newif\ifrecursive % Is it recursive? + +% List of all defined macros in the form +% \definedummyword\macro1\definedummyword\macro2... +% Currently is also contains all @aliases; the list can be split +% if there is a need. +\def\macrolist{} + +% Add the macro to \macrolist +\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname} +\def\addtomacrolistxxx#1{% + \toks0 = \expandafter{\macrolist\definedummyword#1}% + \xdef\macrolist{\the\toks0}% +} + +% Utility routines. +% This does \let #1 = #2, with \csnames; that is, +% \let \csname#1\endcsname = \csname#2\endcsname +% (except of course we have to play expansion games). +% +\def\cslet#1#2{% + \expandafter\let + \csname#1\expandafter\endcsname + \csname#2\endcsname +} + +% Trim leading and trailing spaces off a string. +% Concepts from aro-bend problem 15 (see CTAN). +{\catcode`\@=11 +\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }} +\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@} +\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @} +\def\unbrace#1{#1} +\unbrace{\gdef\trim@@@ #1 } #2@{#1} +} + +% Trim a single trailing ^^M off a string. +{\catcode`\^^M=\other \catcode`\Q=3% +\gdef\eatcr #1{\eatcra #1Q^^MQ}% +\gdef\eatcra#1^^MQ{\eatcrb#1Q}% +\gdef\eatcrb#1Q#2Q{#1}% +} + +% Macro bodies are absorbed as an argument in a context where +% all characters are catcode 10, 11 or 12, except \ which is active +% (as in normal texinfo). It is necessary to change the definition of \. + +% It's necessary to have hard CRs when the macro is executed. This is +% done by making ^^M (\endlinechar) catcode 12 when reading the macro +% body, and then making it the \newlinechar in \scanmacro. + +\def\scanctxt{% + \catcode`\"=\other + \catcode`\+=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\@=\other + \catcode`\^=\other + \catcode`\_=\other + \catcode`\|=\other + \catcode`\~=\other +} + +\def\scanargctxt{% + \scanctxt + \catcode`\\=\other + \catcode`\^^M=\other +} + +\def\macrobodyctxt{% + \scanctxt + \catcode`\{=\other + \catcode`\}=\other + \catcode`\^^M=\other + \usembodybackslash +} + +\def\macroargctxt{% + \scanctxt + \catcode`\\=\other +} + +% \mbodybackslash is the definition of \ in @macro bodies. +% It maps \foo\ => \csname macarg.foo\endcsname => #N +% where N is the macro parameter number. +% We define \csname macarg.\endcsname to be \realbackslash, so +% \\ in macro replacement text gets you a backslash. + +{\catcode`@=0 @catcode`@\=@active + @gdef@usembodybackslash{@let\=@mbodybackslash} + @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname} +} +\expandafter\def\csname macarg.\endcsname{\realbackslash} + +\def\macro{\recursivefalse\parsearg\macroxxx} +\def\rmacro{\recursivetrue\parsearg\macroxxx} + +\def\macroxxx#1{% + \getargs{#1}% now \macname is the macname and \argl the arglist + \ifx\argl\empty % no arguments + \paramno=0% + \else + \expandafter\parsemargdef \argl;% + \fi + \if1\csname ismacro.\the\macname\endcsname + \message{Warning: redefining \the\macname}% + \else + \expandafter\ifx\csname \the\macname\endcsname \relax + \else \errmessage{Macro name \the\macname\space already defined}\fi + \global\cslet{macsave.\the\macname}{\the\macname}% + \global\expandafter\let\csname ismacro.\the\macname\endcsname=1% + \addtomacrolist{\the\macname}% + \fi + \begingroup \macrobodyctxt + \ifrecursive \expandafter\parsermacbody + \else \expandafter\parsemacbody + \fi} + +\parseargdef\unmacro{% + \if1\csname ismacro.#1\endcsname + \global\cslet{#1}{macsave.#1}% + \global\expandafter\let \csname ismacro.#1\endcsname=0% + % Remove the macro name from \macrolist: + \begingroup + \expandafter\let\csname#1\endcsname \relax + \let\definedummyword\unmacrodo + \xdef\macrolist{\macrolist}% + \endgroup + \else + \errmessage{Macro #1 not defined}% + \fi +} + +% Called by \do from \dounmacro on each macro. The idea is to omit any +% macro definitions that have been changed to \relax. +% +\def\unmacrodo#1{% + \ifx #1\relax + % remove this + \else + \noexpand\definedummyword \noexpand#1% + \fi +} + +% This makes use of the obscure feature that if the last token of a +% is #, then the preceding argument is delimited by +% an opening brace, and that opening brace is not consumed. +\def\getargs#1{\getargsxxx#1{}} +\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs} +\def\getmacname #1 #2\relax{\macname={#1}} +\def\getmacargs#1{\def\argl{#1}} + +% Parse the optional {params} list. Set up \paramno and \paramlist +% so \defmacro knows what to do. Define \macarg.blah for each blah +% in the params list, to be ##N where N is the position in that list. +% That gets used by \mbodybackslash (above). + +% We need to get `macro parameter char #' into several definitions. +% The technique used is stolen from LaTeX: let \hash be something +% unexpandable, insert that wherever you need a #, and then redefine +% it to # just before using the token list produced. +% +% The same technique is used to protect \eatspaces till just before +% the macro is used. + +\def\parsemargdef#1;{\paramno=0\def\paramlist{}% + \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,} +\def\parsemargdefxxx#1,{% + \if#1;\let\next=\relax + \else \let\next=\parsemargdefxxx + \advance\paramno by 1% + \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname + {\xeatspaces{\hash\the\paramno}}% + \edef\paramlist{\paramlist\hash\the\paramno,}% + \fi\next} + +% These two commands read recursive and nonrecursive macro bodies. +% (They're different since rec and nonrec macros end differently.) + +\long\def\parsemacbody#1@end macro% +{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% +\long\def\parsermacbody#1@end rmacro% +{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% + +% This defines the macro itself. There are six cases: recursive and +% nonrecursive macros of zero, one, and many arguments. +% Much magic with \expandafter here. +% \xdef is used so that macro definitions will survive the file +% they're defined in; @include reads the file inside a group. +\def\defmacro{% + \let\hash=##% convert placeholders to macro parameter chars + \ifrecursive + \ifcase\paramno + % 0 + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\scanmacro{\temp}}% + \or % 1 + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\braceorline + \expandafter\noexpand\csname\the\macname xxx\endcsname}% + \expandafter\xdef\csname\the\macname xxx\endcsname##1{% + \egroup\noexpand\scanmacro{\temp}}% + \else % many + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\csname\the\macname xx\endcsname}% + \expandafter\xdef\csname\the\macname xx\endcsname##1{% + \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname xxx\endcsname + \paramlist{\egroup\noexpand\scanmacro{\temp}}% + \fi + \else + \ifcase\paramno + % 0 + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \or % 1 + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\braceorline + \expandafter\noexpand\csname\the\macname xxx\endcsname}% + \expandafter\xdef\csname\the\macname xxx\endcsname##1{% + \egroup + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \else % many + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \expandafter\noexpand\csname\the\macname xx\endcsname}% + \expandafter\xdef\csname\the\macname xx\endcsname##1{% + \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname xxx\endcsname + \paramlist{% + \egroup + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \fi + \fi} + +\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}} + +% \braceorline decides whether the next nonwhitespace character is a +% {. If so it reads up to the closing }, if not, it reads the whole +% line. Whatever was read is then fed to the next control sequence +% as an argument (by \parsebrace or \parsearg) +\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx} +\def\braceorlinexxx{% + \ifx\nchar\bgroup\else + \expandafter\parsearg + \fi \macnamexxx} + + +% @alias. +% We need some trickery to remove the optional spaces around the equal +% sign. Just make them active and then expand them all to nothing. +\def\alias{\parseargusing\obeyspaces\aliasxxx} +\def\aliasxxx #1{\aliasyyy#1\relax} +\def\aliasyyy #1=#2\relax{% + {% + \expandafter\let\obeyedspace=\empty + \addtomacrolist{#1}% + \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}% + }% + \next +} + + +\message{cross references,} + +\newwrite\auxfile +\newif\ifhavexrefs % True if xref values are known. +\newif\ifwarnedxrefs % True if we warned once that they aren't known. + +% @inforef is relatively simple. +\def\inforef #1{\inforefzzz #1,,,,**} +\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, + node \samp{\ignorespaces#1{}}} + +% @node's only job in TeX is to define \lastnode, which is used in +% cross-references. The @node line might or might not have commas, and +% might or might not have spaces before the first comma, like: +% @node foo , bar , ... +% We don't want such trailing spaces in the node name. +% +\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse} +% +% also remove a trailing comma, in case of something like this: +% @node Help-Cross, , , Cross-refs +\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse} +\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}} + +\let\nwnode=\node +\let\lastnode=\empty + +% Write a cross-reference definition for the current node. #1 is the +% type (Ynumbered, Yappendix, Ynothing). +% +\def\donoderef#1{% + \ifx\lastnode\empty\else + \setref{\lastnode}{#1}% + \global\let\lastnode=\empty + \fi +} + +% @anchor{NAME} -- define xref target at arbitrary point. +% +\newcount\savesfregister +% +\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi} +\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} +\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} + +% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an +% anchor), which consists of three parts: +% 1) NAME-title - the current sectioning name taken from \thissection, +% or the anchor name. +% 2) NAME-snt - section number and type, passed as the SNT arg, or +% empty for anchors. +% 3) NAME-pg - the page number. +% +% This is called from \donoderef, \anchor, and \dofloat. In the case of +% floats, there is an additional part, which is not written here: +% 4) NAME-lof - the text as it should appear in a @listoffloats. +% +\def\setref#1#2{% + \pdfmkdest{#1}% + \iflinks + {% + \atdummies % preserve commands, but don't expand them + \edef\writexrdef##1##2{% + \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef + ##1}{##2}}% these are parameters of \writexrdef + }% + \toks0 = \expandafter{\thissection}% + \immediate \writexrdef{title}{\the\toks0 }% + \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc. + \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, during \shipout + }% + \fi +} + +% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is +% the node name, #2 the name of the Info cross-reference, #3 the printed +% node name, #4 the name of the Info file, #5 the name of the printed +% manual. All but the node name can be omitted. +% +\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]} +\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} +\def\ref#1{\xrefX[#1,,,,,,,]} +\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup + \unsepspaces + \def\printedmanual{\ignorespaces #5}% + \def\printedrefname{\ignorespaces #3}% + \setbox1=\hbox{\printedmanual\unskip}% + \setbox0=\hbox{\printedrefname\unskip}% + \ifdim \wd0 = 0pt + % No printed node name was explicitly given. + \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax + % Use the node name inside the square brackets. + \def\printedrefname{\ignorespaces #1}% + \else + % Use the actual chapter/section title appear inside + % the square brackets. Use the real section title if we have it. + \ifdim \wd1 > 0pt + % It is in another manual, so we don't have it. + \def\printedrefname{\ignorespaces #1}% + \else + \ifhavexrefs + % We know the real title if we have the xref values. + \def\printedrefname{\refx{#1-title}{}}% + \else + % Otherwise just copy the Info node name. + \def\printedrefname{\ignorespaces #1}% + \fi% + \fi + \fi + \fi + % + % Make link in pdf output. + \ifpdf + \leavevmode + \getfilename{#4}% + {\indexnofonts + \turnoffactive + % See comments at \activebackslashdouble. + {\activebackslashdouble \xdef\pdfxrefdest{#1}% + \backslashparens\pdfxrefdest}% + % + \ifnum\filenamelength>0 + \startlink attr{/Border [0 0 0]}% + goto file{\the\filename.pdf} name{\pdfxrefdest}% + \else + \startlink attr{/Border [0 0 0]}% + goto name{\pdfmkpgn{\pdfxrefdest}}% + \fi + }% + \linkcolor + \fi + % + % Float references are printed completely differently: "Figure 1.2" + % instead of "[somenode], p.3". We distinguish them by the + % LABEL-title being set to a magic string. + {% + % Have to otherify everything special to allow the \csname to + % include an _ in the xref name, etc. + \indexnofonts + \turnoffactive + \expandafter\global\expandafter\let\expandafter\Xthisreftitle + \csname XR#1-title\endcsname + }% + \iffloat\Xthisreftitle + % If the user specified the print name (third arg) to the ref, + % print it instead of our usual "Figure 1.2". + \ifdim\wd0 = 0pt + \refx{#1-snt}{}% + \else + \printedrefname + \fi + % + % if the user also gave the printed manual name (fifth arg), append + % "in MANUALNAME". + \ifdim \wd1 > 0pt + \space \putwordin{} \cite{\printedmanual}% + \fi + \else + % node/anchor (non-float) references. + % + % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not + % insert empty discretionaries after hyphens, which means that it will + % not find a line break at a hyphen in a node names. Since some manuals + % are best written with fairly long node names, containing hyphens, this + % is a loss. Therefore, we give the text of the node name again, so it + % is as if TeX is seeing it for the first time. + \ifdim \wd1 > 0pt + \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}% + \else + % _ (for example) has to be the character _ for the purposes of the + % control sequence corresponding to the node, but it has to expand + % into the usual \leavevmode...\vrule stuff for purposes of + % printing. So we \turnoffactive for the \refx-snt, back on for the + % printing, back off for the \refx-pg. + {\turnoffactive + % Only output a following space if the -snt ref is nonempty; for + % @unnumbered and @anchor, it won't be. + \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% + \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi + }% + % output the `[mynode]' via a macro so it can be overridden. + \xrefprintnodename\printedrefname + % + % But we always want a comma and a space: + ,\space + % + % output the `page 3'. + \turnoffactive \putwordpage\tie\refx{#1-pg}{}% + \fi + \fi + \endlink +\endgroup} + +% This macro is called from \xrefX for the `[nodename]' part of xref +% output. It's a separate macro only so it can be changed more easily, +% since square brackets don't work well in some documents. Particularly +% one that Bob is working on :). +% +\def\xrefprintnodename#1{[#1]} + +% Things referred to by \setref. +% +\def\Ynothing{} +\def\Yomitfromtoc{} +\def\Ynumbered{% + \ifnum\secno=0 + \putwordChapter@tie \the\chapno + \else \ifnum\subsecno=0 + \putwordSection@tie \the\chapno.\the\secno + \else \ifnum\subsubsecno=0 + \putwordSection@tie \the\chapno.\the\secno.\the\subsecno + \else + \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno + \fi\fi\fi +} +\def\Yappendix{% + \ifnum\secno=0 + \putwordAppendix@tie @char\the\appendixno{}% + \else \ifnum\subsecno=0 + \putwordSection@tie @char\the\appendixno.\the\secno + \else \ifnum\subsubsecno=0 + \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno + \else + \putwordSection@tie + @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno + \fi\fi\fi +} + +% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME. +% If its value is nonempty, SUFFIX is output afterward. +% +\def\refx#1#2{% + {% + \indexnofonts + \otherbackslash + \expandafter\global\expandafter\let\expandafter\thisrefX + \csname XR#1\endcsname + }% + \ifx\thisrefX\relax + % If not defined, say something at least. + \angleleft un\-de\-fined\angleright + \iflinks + \ifhavexrefs + \message{\linenumber Undefined cross reference `#1'.}% + \else + \ifwarnedxrefs\else + \global\warnedxrefstrue + \message{Cross reference values unknown; you must run TeX again.}% + \fi + \fi + \fi + \else + % It's defined, so just use it. + \thisrefX + \fi + #2% Output the suffix in any case. +} + +% This is the macro invoked by entries in the aux file. Usually it's +% just a \def (we prepend XR to the control sequence name to avoid +% collisions). But if this is a float type, we have more work to do. +% +\def\xrdef#1#2{% + {% The node name might contain 8-bit characters, which in our current + % implementation are changed to commands like @'e. Don't let these + % mess up the control sequence name. + \indexnofonts + \turnoffactive + \xdef\safexrefname{#1}% + }% + % + \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref + % + % Was that xref control sequence that we just defined for a float? + \expandafter\iffloat\csname XR\safexrefname\endcsname + % it was a float, and we have the (safe) float type in \iffloattype. + \expandafter\let\expandafter\floatlist + \csname floatlist\iffloattype\endcsname + % + % Is this the first time we've seen this float type? + \expandafter\ifx\floatlist\relax + \toks0 = {\do}% yes, so just \do + \else + % had it before, so preserve previous elements in list. + \toks0 = \expandafter{\floatlist\do}% + \fi + % + % Remember this xref in the control sequence \floatlistFLOATTYPE, + % for later use in \listoffloats. + \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0 + {\safexrefname}}% + \fi +} + +% Read the last existing aux file, if any. No error if none exists. +% +\def\tryauxfile{% + \openin 1 \jobname.aux + \ifeof 1 \else + \readdatafile{aux}% + \global\havexrefstrue + \fi + \closein 1 +} + +\def\setupdatafile{% + \catcode`\^^@=\other + \catcode`\^^A=\other + \catcode`\^^B=\other + \catcode`\^^C=\other + \catcode`\^^D=\other + \catcode`\^^E=\other + \catcode`\^^F=\other + \catcode`\^^G=\other + \catcode`\^^H=\other + \catcode`\^^K=\other + \catcode`\^^L=\other + \catcode`\^^N=\other + \catcode`\^^P=\other + \catcode`\^^Q=\other + \catcode`\^^R=\other + \catcode`\^^S=\other + \catcode`\^^T=\other + \catcode`\^^U=\other + \catcode`\^^V=\other + \catcode`\^^W=\other + \catcode`\^^X=\other + \catcode`\^^Z=\other + \catcode`\^^[=\other + \catcode`\^^\=\other + \catcode`\^^]=\other + \catcode`\^^^=\other + \catcode`\^^_=\other + % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc. + % in xref tags, i.e., node names. But since ^^e4 notation isn't + % supported in the main text, it doesn't seem desirable. Furthermore, + % that is not enough: for node names that actually contain a ^ + % character, we would end up writing a line like this: 'xrdef {'hat + % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first + % argument, and \hat is not an expandable control sequence. It could + % all be worked out, but why? Either we support ^^ or we don't. + % + % The other change necessary for this was to define \auxhat: + % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter + % and then to call \auxhat in \setq. + % + \catcode`\^=\other + % + % Special characters. Should be turned off anyway, but... + \catcode`\~=\other + \catcode`\[=\other + \catcode`\]=\other + \catcode`\"=\other + \catcode`\_=\other + \catcode`\|=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\$=\other + \catcode`\#=\other + \catcode`\&=\other + \catcode`\%=\other + \catcode`+=\other % avoid \+ for paranoia even though we've turned it off + % + % This is to support \ in node names and titles, since the \ + % characters end up in a \csname. It's easier than + % leaving it active and making its active definition an actual \ + % character. What I don't understand is why it works in the *value* + % of the xrdef. Seems like it should be a catcode12 \, and that + % should not typeset properly. But it works, so I'm moving on for + % now. --karl, 15jan04. + \catcode`\\=\other + % + % Make the characters 128-255 be printing characters. + {% + \count1=128 + \def\loop{% + \catcode\count1=\other + \advance\count1 by 1 + \ifnum \count1<256 \loop \fi + }% + }% + % + % @ is our escape character in .aux files, and we need braces. + \catcode`\{=1 + \catcode`\}=2 + \catcode`\@=0 +} + +\def\readdatafile#1{% +\begingroup + \setupdatafile + \input\jobname.#1 +\endgroup} + + +\message{insertions,} +% including footnotes. + +\newcount \footnoteno + +% The trailing space in the following definition for supereject is +% vital for proper filling; pages come out unaligned when you do a +% pagealignmacro call if that space before the closing brace is +% removed. (Generally, numeric constants should always be followed by a +% space to prevent strange expansion errors.) +\def\supereject{\par\penalty -20000\footnoteno =0 } + +% @footnotestyle is meaningful for info output only. +\let\footnotestyle=\comment + +{\catcode `\@=11 +% +% Auto-number footnotes. Otherwise like plain. +\gdef\footnote{% + \let\indent=\ptexindent + \let\noindent=\ptexnoindent + \global\advance\footnoteno by \@ne + \edef\thisfootno{$^{\the\footnoteno}$}% + % + % In case the footnote comes at the end of a sentence, preserve the + % extra spacing after we do the footnote number. + \let\@sf\empty + \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi + % + % Remove inadvertent blank space before typesetting the footnote number. + \unskip + \thisfootno\@sf + \dofootnote +}% + +% Don't bother with the trickery in plain.tex to not require the +% footnote text as a parameter. Our footnotes don't need to be so general. +% +% Oh yes, they do; otherwise, @ifset (and anything else that uses +% \parseargline) fails inside footnotes because the tokens are fixed when +% the footnote is read. --karl, 16nov96. +% +\gdef\dofootnote{% + \insert\footins\bgroup + % We want to typeset this text as a normal paragraph, even if the + % footnote reference occurs in (for example) a display environment. + % So reset some parameters. + \hsize=\pagewidth + \interlinepenalty\interfootnotelinepenalty + \splittopskip\ht\strutbox % top baseline for broken footnotes + \splitmaxdepth\dp\strutbox + \floatingpenalty\@MM + \leftskip\z@skip + \rightskip\z@skip + \spaceskip\z@skip + \xspaceskip\z@skip + \parindent\defaultparindent + % + \smallfonts \rm + % + % Because we use hanging indentation in footnotes, a @noindent appears + % to exdent this text, so make it be a no-op. makeinfo does not use + % hanging indentation so @noindent can still be needed within footnote + % text after an @example or the like (not that this is good style). + \let\noindent = \relax + % + % Hang the footnote text off the number. Use \everypar in case the + % footnote extends for more than one paragraph. + \everypar = {\hang}% + \textindent{\thisfootno}% + % + % Don't crash into the line above the footnote text. Since this + % expands into a box, it must come within the paragraph, lest it + % provide a place where TeX can split the footnote. + \footstrut + \futurelet\next\fo@t +} +}%end \catcode `\@=11 + +% In case a @footnote appears in a vbox, save the footnote text and create +% the real \insert just after the vbox finished. Otherwise, the insertion +% would be lost. +% Similarily, if a @footnote appears inside an alignment, save the footnote +% text to a box and make the \insert when a row of the table is finished. +% And the same can be done for other insert classes. --kasal, 16nov03. + +% Replace the \insert primitive by a cheating macro. +% Deeper inside, just make sure that the saved insertions are not spilled +% out prematurely. +% +\def\startsavinginserts{% + \ifx \insert\ptexinsert + \let\insert\saveinsert + \else + \let\checkinserts\relax + \fi +} + +% This \insert replacement works for both \insert\footins{foo} and +% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}. +% +\def\saveinsert#1{% + \edef\next{\noexpand\savetobox \makeSAVEname#1}% + \afterassignment\next + % swallow the left brace + \let\temp = +} +\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}} +\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1} + +\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi} + +\def\placesaveins#1{% + \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname + {\box#1}% +} + +% eat @SAVE -- beware, all of them have catcode \other: +{ + \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-) + \gdef\gobblesave @SAVE{} +} + +% initialization: +\def\newsaveins #1{% + \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}% + \next +} +\def\newsaveinsX #1{% + \csname newbox\endcsname #1% + \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts + \checksaveins #1}% +} + +% initialize: +\let\checkinserts\empty +\newsaveins\footins +\newsaveins\margin + + +% @image. We use the macros from epsf.tex to support this. +% If epsf.tex is not installed and @image is used, we complain. +% +% Check for and read epsf.tex up front. If we read it only at @image +% time, we might be inside a group, and then its definitions would get +% undone and the next image would fail. +\openin 1 = epsf.tex +\ifeof 1 \else + % Do not bother showing banner with epsf.tex v2.7k (available in + % doc/epsf.tex and on ctan). + \def\epsfannounce{\toks0 = }% + \input epsf.tex +\fi +\closein 1 +% +% We will only complain once about lack of epsf.tex. +\newif\ifwarnednoepsf +\newhelp\noepsfhelp{epsf.tex must be installed for images to + work. It is also included in the Texinfo distribution, or you can get + it from ftp://tug.org/tex/epsf.tex.} +% +\def\image#1{% + \ifx\epsfbox\undefined + \ifwarnednoepsf \else + \errhelp = \noepsfhelp + \errmessage{epsf.tex not found, images will be ignored}% + \global\warnednoepsftrue + \fi + \else + \imagexxx #1,,,,,\finish + \fi +} +% +% Arguments to @image: +% #1 is (mandatory) image filename; we tack on .eps extension. +% #2 is (optional) width, #3 is (optional) height. +% #4 is (ignored optional) html alt text. +% #5 is (ignored optional) extension. +% #6 is just the usual extra ignored arg for parsing this stuff. +\newif\ifimagevmode +\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup + \catcode`\^^M = 5 % in case we're inside an example + \normalturnoffactive % allow _ et al. in names + % If the image is by itself, center it. + \ifvmode + \imagevmodetrue + \nobreak\bigskip + % Usually we'll have text after the image which will insert + % \parskip glue, so insert it here too to equalize the space + % above and below. + \nobreak\vskip\parskip + \nobreak + \line\bgroup + \fi + % + % Output the image. + \ifpdf + \dopdfimage{#1}{#2}{#3}% + \else + % \epsfbox itself resets \epsf?size at each figure. + \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi + \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi + \epsfbox{#1.eps}% + \fi + % + \ifimagevmode \egroup \bigbreak \fi % space after the image +\endgroup} + + +% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables, +% etc. We don't actually implement floating yet, we always include the +% float "here". But it seemed the best name for the future. +% +\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish} + +% There may be a space before second and/or third parameter; delete it. +\def\eatcommaspace#1, {#1,} + +% #1 is the optional FLOATTYPE, the text label for this float, typically +% "Figure", "Table", "Example", etc. Can't contain commas. If omitted, +% this float will not be numbered and cannot be referred to. +% +% #2 is the optional xref label. Also must be present for the float to +% be referable. +% +% #3 is the optional positioning argument; for now, it is ignored. It +% will somehow specify the positions allowed to float to (here, top, bottom). +% +% We keep a separate counter for each FLOATTYPE, which we reset at each +% chapter-level command. +\let\resetallfloatnos=\empty +% +\def\dofloat#1,#2,#3,#4\finish{% + \let\thiscaption=\empty + \let\thisshortcaption=\empty + % + % don't lose footnotes inside @float. + % + % BEWARE: when the floats start float, we have to issue warning whenever an + % insert appears inside a float which could possibly float. --kasal, 26may04 + % + \startsavinginserts + % + % We can't be used inside a paragraph. + \par + % + \vtop\bgroup + \def\floattype{#1}% + \def\floatlabel{#2}% + \def\floatloc{#3}% we do nothing with this yet. + % + \ifx\floattype\empty + \let\safefloattype=\empty + \else + {% + % the floattype might have accents or other special characters, + % but we need to use it in a control sequence name. + \indexnofonts + \turnoffactive + \xdef\safefloattype{\floattype}% + }% + \fi + % + % If label is given but no type, we handle that as the empty type. + \ifx\floatlabel\empty \else + % We want each FLOATTYPE to be numbered separately (Figure 1, + % Table 1, Figure 2, ...). (And if no label, no number.) + % + \expandafter\getfloatno\csname\safefloattype floatno\endcsname + \global\advance\floatno by 1 + % + {% + % This magic value for \thissection is output by \setref as the + % XREFLABEL-title value. \xrefX uses it to distinguish float + % labels (which have a completely different output format) from + % node and anchor labels. And \xrdef uses it to construct the + % lists of floats. + % + \edef\thissection{\floatmagic=\safefloattype}% + \setref{\floatlabel}{Yfloat}% + }% + \fi + % + % start with \parskip glue, I guess. + \vskip\parskip + % + % Don't suppress indentation if a float happens to start a section. + \restorefirstparagraphindent +} + +% we have these possibilities: +% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap +% @float Foo,lbl & no caption: Foo 1.1 +% @float Foo & @caption{Cap}: Foo: Cap +% @float Foo & no caption: Foo +% @float ,lbl & Caption{Cap}: 1.1: Cap +% @float ,lbl & no caption: 1.1 +% @float & @caption{Cap}: Cap +% @float & no caption: +% +\def\Efloat{% + \let\floatident = \empty + % + % In all cases, if we have a float type, it comes first. + \ifx\floattype\empty \else \def\floatident{\floattype}\fi + % + % If we have an xref label, the number comes next. + \ifx\floatlabel\empty \else + \ifx\floattype\empty \else % if also had float type, need tie first. + \appendtomacro\floatident{\tie}% + \fi + % the number. + \appendtomacro\floatident{\chaplevelprefix\the\floatno}% + \fi + % + % Start the printed caption with what we've constructed in + % \floatident, but keep it separate; we need \floatident again. + \let\captionline = \floatident + % + \ifx\thiscaption\empty \else + \ifx\floatident\empty \else + \appendtomacro\captionline{: }% had ident, so need a colon between + \fi + % + % caption text. + \appendtomacro\captionline{\scanexp\thiscaption}% + \fi + % + % If we have anything to print, print it, with space before. + % Eventually this needs to become an \insert. + \ifx\captionline\empty \else + \vskip.5\parskip + \captionline + % + % Space below caption. + \vskip\parskip + \fi + % + % If have an xref label, write the list of floats info. Do this + % after the caption, to avoid chance of it being a breakpoint. + \ifx\floatlabel\empty \else + % Write the text that goes in the lof to the aux file as + % \floatlabel-lof. Besides \floatident, we include the short + % caption if specified, else the full caption if specified, else nothing. + {% + \atdummies + % + % since we read the caption text in the macro world, where ^^M + % is turned into a normal character, we have to scan it back, so + % we don't write the literal three characters "^^M" into the aux file. + \scanexp{% + \xdef\noexpand\gtemp{% + \ifx\thisshortcaption\empty + \thiscaption + \else + \thisshortcaption + \fi + }% + }% + \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident + \ifx\gtemp\empty \else : \gtemp \fi}}% + }% + \fi + \egroup % end of \vtop + % + % place the captured inserts + % + % BEWARE: when the floats start floating, we have to issue warning + % whenever an insert appears inside a float which could possibly + % float. --kasal, 26may04 + % + \checkinserts +} + +% Append the tokens #2 to the definition of macro #1, not expanding either. +% +\def\appendtomacro#1#2{% + \expandafter\def\expandafter#1\expandafter{#1#2}% +} + +% @caption, @shortcaption +% +\def\caption{\docaption\thiscaption} +\def\shortcaption{\docaption\thisshortcaption} +\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption} +\def\defcaption#1#2{\egroup \def#1{#2}} + +% The parameter is the control sequence identifying the counter we are +% going to use. Create it if it doesn't exist and assign it to \floatno. +\def\getfloatno#1{% + \ifx#1\relax + % Haven't seen this figure type before. + \csname newcount\endcsname #1% + % + % Remember to reset this floatno at the next chap. + \expandafter\gdef\expandafter\resetallfloatnos + \expandafter{\resetallfloatnos #1=0 }% + \fi + \let\floatno#1% +} + +% \setref calls this to get the XREFLABEL-snt value. We want an @xref +% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we +% first read the @float command. +% +\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}% + +% Magic string used for the XREFLABEL-title value, so \xrefX can +% distinguish floats from other xref types. +\def\floatmagic{!!float!!} + +% #1 is the control sequence we are passed; we expand into a conditional +% which is true if #1 represents a float ref. That is, the magic +% \thissection value which we \setref above. +% +\def\iffloat#1{\expandafter\doiffloat#1==\finish} +% +% #1 is (maybe) the \floatmagic string. If so, #2 will be the +% (safe) float type for this float. We set \iffloattype to #2. +% +\def\doiffloat#1=#2=#3\finish{% + \def\temp{#1}% + \def\iffloattype{#2}% + \ifx\temp\floatmagic +} + +% @listoffloats FLOATTYPE - print a list of floats like a table of contents. +% +\parseargdef\listoffloats{% + \def\floattype{#1}% floattype + {% + % the floattype might have accents or other special characters, + % but we need to use it in a control sequence name. + \indexnofonts + \turnoffactive + \xdef\safefloattype{\floattype}% + }% + % + % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE. + \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax + \ifhavexrefs + % if the user said @listoffloats foo but never @float foo. + \message{\linenumber No `\safefloattype' floats to list.}% + \fi + \else + \begingroup + \leftskip=\tocindent % indent these entries like a toc + \let\do=\listoffloatsdo + \csname floatlist\safefloattype\endcsname + \endgroup + \fi +} + +% This is called on each entry in a list of floats. We're passed the +% xref label, in the form LABEL-title, which is how we save it in the +% aux file. We strip off the -title and look up \XRLABEL-lof, which +% has the text we're supposed to typeset here. +% +% Figures without xref labels will not be included in the list (since +% they won't appear in the aux file). +% +\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish} +\def\listoffloatsdoentry#1-title\finish{{% + % Can't fully expand XR#1-lof because it can contain anything. Just + % pass the control sequence. On the other hand, XR#1-pg is just the + % page number, and we want to fully expand that so we can get a link + % in pdf output. + \toksA = \expandafter{\csname XR#1-lof\endcsname}% + % + % use the same \entry macro we use to generate the TOC and index. + \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}% + \writeentry +}} + + +\message{localization,} + +% @documentlanguage is usually given very early, just after +% @setfilename. If done too late, it may not override everything +% properly. Single argument is the language abbreviation. +% It would be nice if we could set up a hyphenation file here. +% +\parseargdef\documentlanguage{% + \tex % read txi-??.tex file in plain TeX. + % Read the file if it exists. + \openin 1 txi-#1.tex + \ifeof 1 + \errhelp = \nolanghelp + \errmessage{Cannot read language file txi-#1.tex}% + \else + \input txi-#1.tex + \fi + \closein 1 + \endgroup +} +\newhelp\nolanghelp{The given language definition file cannot be found or +is empty. Maybe you need to install it? In the current directory +should work if nowhere else does.} + +% Set the catcode of characters 128 through 255 to the specified number. +% +\def\setnonasciicharscatcode#1{% + \count255=128 + \loop\ifnum\count255<256 + \global\catcode\count255=#1 + \advance\count255 by 1 + \repeat +} + +% @documentencoding sets the definition of non-ASCII characters +% according to the specified encoding. +% +\parseargdef\documentencoding{% + % Encoding being declared for the document. + \def\declaredencoding{\csname #1.enc\endcsname}% + % + % Supported encodings: names converted to tokens in order to be able + % to compare them with \ifx. + \def\ascii{\csname US-ASCII.enc\endcsname}% + \def\latnine{\csname ISO-8859-15.enc\endcsname}% + \def\latone{\csname ISO-8859-1.enc\endcsname}% + \def\lattwo{\csname ISO-8859-2.enc\endcsname}% + \def\utfeight{\csname UTF-8.enc\endcsname}% + % + \ifx \declaredencoding \ascii + \asciichardefs + % + \else \ifx \declaredencoding \lattwo + \setnonasciicharscatcode\active + \lattwochardefs + % + \else \ifx \declaredencoding \latone + \setnonasciicharscatcode\active + \latonechardefs + % + \else \ifx \declaredencoding \latnine + \setnonasciicharscatcode\active + \latninechardefs + % + \else \ifx \declaredencoding \utfeight + \setnonasciicharscatcode\active + \utfeightchardefs + % + \else + \message{Unknown document encoding #1, ignoring.}% + % + \fi % utfeight + \fi % latnine + \fi % latone + \fi % lattwo + \fi % ascii +} + +% A message to be logged when using a character that isn't available +% the default font encoding (OT1). +% +\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}} + +% Take account of \c (plain) vs. \, (Texinfo) difference. +\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi} + +% First, make active non-ASCII characters in order for them to be +% correctly categorized when TeX reads the replacement text of +% macros containing the character definitions. +\setnonasciicharscatcode\active +% +% Latin1 (ISO-8859-1) character definitions. +\def\latonechardefs{% + \gdef^^a0{~} + \gdef^^a1{\exclamdown} + \gdef^^a2{\missingcharmsg{CENT SIGN}} + \gdef^^a3{{\pounds}} + \gdef^^a4{\missingcharmsg{CURRENCY SIGN}} + \gdef^^a5{\missingcharmsg{YEN SIGN}} + \gdef^^a6{\missingcharmsg{BROKEN BAR}} + \gdef^^a7{\S} + \gdef^^a8{\"{}} + \gdef^^a9{\copyright} + \gdef^^aa{\ordf} + \gdef^^ab{\missingcharmsg{LEFT-POINTING DOUBLE ANGLE QUOTATION MARK}} + \gdef^^ac{$\lnot$} + \gdef^^ad{\-} + \gdef^^ae{\registeredsymbol} + \gdef^^af{\={}} + % + \gdef^^b0{\textdegree} + \gdef^^b1{$\pm$} + \gdef^^b2{$^2$} + \gdef^^b3{$^3$} + \gdef^^b4{\'{}} + \gdef^^b5{$\mu$} + \gdef^^b6{\P} + % + \gdef^^b7{$^.$} + \gdef^^b8{\cedilla\ } + \gdef^^b9{$^1$} + \gdef^^ba{\ordm} + % + \gdef^^bb{\missingcharmsg{RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK}} + \gdef^^bc{$1\over4$} + \gdef^^bd{$1\over2$} + \gdef^^be{$3\over4$} + \gdef^^bf{\questiondown} + % + \gdef^^c0{\`A} + \gdef^^c1{\'A} + \gdef^^c2{\^A} + \gdef^^c3{\~A} + \gdef^^c4{\"A} + \gdef^^c5{\ringaccent A} + \gdef^^c6{\AE} + \gdef^^c7{\cedilla C} + \gdef^^c8{\`E} + \gdef^^c9{\'E} + \gdef^^ca{\^E} + \gdef^^cb{\"E} + \gdef^^cc{\`I} + \gdef^^cd{\'I} + \gdef^^ce{\^I} + \gdef^^cf{\"I} + % + \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER ETH}} + \gdef^^d1{\~N} + \gdef^^d2{\`O} + \gdef^^d3{\'O} + \gdef^^d4{\^O} + \gdef^^d5{\~O} + \gdef^^d6{\"O} + \gdef^^d7{$\times$} + \gdef^^d8{\O} + \gdef^^d9{\`U} + \gdef^^da{\'U} + \gdef^^db{\^U} + \gdef^^dc{\"U} + \gdef^^dd{\'Y} + \gdef^^de{\missingcharmsg{LATIN CAPITAL LETTER THORN}} + \gdef^^df{\ss} + % + \gdef^^e0{\`a} + \gdef^^e1{\'a} + \gdef^^e2{\^a} + \gdef^^e3{\~a} + \gdef^^e4{\"a} + \gdef^^e5{\ringaccent a} + \gdef^^e6{\ae} + \gdef^^e7{\cedilla c} + \gdef^^e8{\`e} + \gdef^^e9{\'e} + \gdef^^ea{\^e} + \gdef^^eb{\"e} + \gdef^^ec{\`{\dotless i}} + \gdef^^ed{\'{\dotless i}} + \gdef^^ee{\^{\dotless i}} + \gdef^^ef{\"{\dotless i}} + % + \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER ETH}} + \gdef^^f1{\~n} + \gdef^^f2{\`o} + \gdef^^f3{\'o} + \gdef^^f4{\^o} + \gdef^^f5{\~o} + \gdef^^f6{\"o} + \gdef^^f7{$\div$} + \gdef^^f8{\o} + \gdef^^f9{\`u} + \gdef^^fa{\'u} + \gdef^^fb{\^u} + \gdef^^fc{\"u} + \gdef^^fd{\'y} + \gdef^^fe{\missingcharmsg{LATIN SMALL LETTER THORN}} + \gdef^^ff{\"y} +} + +% Latin9 (ISO-8859-15) encoding character definitions. +\def\latninechardefs{% + % Encoding is almost identical to Latin1. + \latonechardefs + % + \gdef^^a4{\euro} + \gdef^^a6{\v S} + \gdef^^a8{\v s} + \gdef^^b4{\v Z} + \gdef^^b8{\v z} + \gdef^^bc{\OE} + \gdef^^bd{\oe} + \gdef^^be{\"Y} +} + +% Latin2 (ISO-8859-2) character definitions. +\def\lattwochardefs{% + \gdef^^a0{~} + \gdef^^a1{\missingcharmsg{LATIN CAPITAL LETTER A WITH OGONEK}} + \gdef^^a2{\u{}} + \gdef^^a3{\L} + \gdef^^a4{\missingcharmsg{CURRENCY SIGN}} + \gdef^^a5{\v L} + \gdef^^a6{\'S} + \gdef^^a7{\S} + \gdef^^a8{\"{}} + \gdef^^a9{\v S} + \gdef^^aa{\cedilla S} + \gdef^^ab{\v T} + \gdef^^ac{\'Z} + \gdef^^ad{\-} + \gdef^^ae{\v Z} + \gdef^^af{\dotaccent Z} + % + \gdef^^b0{\textdegree} + \gdef^^b1{\missingcharmsg{LATIN SMALL LETTER A WITH OGONEK}} + \gdef^^b2{\missingcharmsg{OGONEK}} + \gdef^^b3{\l} + \gdef^^b4{\'{}} + \gdef^^b5{\v l} + \gdef^^b6{\'s} + \gdef^^b7{\v{}} + \gdef^^b8{\cedilla\ } + \gdef^^b9{\v s} + \gdef^^ba{\cedilla s} + \gdef^^bb{\v t} + \gdef^^bc{\'z} + \gdef^^bd{\H{}} + \gdef^^be{\v z} + \gdef^^bf{\dotaccent z} + % + \gdef^^c0{\'R} + \gdef^^c1{\'A} + \gdef^^c2{\^A} + \gdef^^c3{\u A} + \gdef^^c4{\"A} + \gdef^^c5{\'L} + \gdef^^c6{\'C} + \gdef^^c7{\cedilla C} + \gdef^^c8{\v C} + \gdef^^c9{\'E} + \gdef^^ca{\missingcharmsg{LATIN CAPITAL LETTER E WITH OGONEK}} + \gdef^^cb{\"E} + \gdef^^cc{\v E} + \gdef^^cd{\'I} + \gdef^^ce{\^I} + \gdef^^cf{\v D} + % + \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER D WITH STROKE}} + \gdef^^d1{\'N} + \gdef^^d2{\v N} + \gdef^^d3{\'O} + \gdef^^d4{\^O} + \gdef^^d5{\H O} + \gdef^^d6{\"O} + \gdef^^d7{$\times$} + \gdef^^d8{\v R} + \gdef^^d9{\ringaccent U} + \gdef^^da{\'U} + \gdef^^db{\H U} + \gdef^^dc{\"U} + \gdef^^dd{\'Y} + \gdef^^de{\cedilla T} + \gdef^^df{\ss} + % + \gdef^^e0{\'r} + \gdef^^e1{\'a} + \gdef^^e2{\^a} + \gdef^^e3{\u a} + \gdef^^e4{\"a} + \gdef^^e5{\'l} + \gdef^^e6{\'c} + \gdef^^e7{\cedilla c} + \gdef^^e8{\v c} + \gdef^^e9{\'e} + \gdef^^ea{\missingcharmsg{LATIN SMALL LETTER E WITH OGONEK}} + \gdef^^eb{\"e} + \gdef^^ec{\v e} + \gdef^^ed{\'\i} + \gdef^^ee{\^\i} + \gdef^^ef{\v d} + % + \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER D WITH STROKE}} + \gdef^^f1{\'n} + \gdef^^f2{\v n} + \gdef^^f3{\'o} + \gdef^^f4{\^o} + \gdef^^f5{\H o} + \gdef^^f6{\"o} + \gdef^^f7{$\div$} + \gdef^^f8{\v r} + \gdef^^f9{\ringaccent u} + \gdef^^fa{\'u} + \gdef^^fb{\H u} + \gdef^^fc{\"u} + \gdef^^fd{\'y} + \gdef^^fe{\cedilla t} + \gdef^^ff{\dotaccent{}} +} + +% UTF-8 character definitions. +% +% This code to support UTF-8 is based on LaTeX's utf8.def, with some +% changes for Texinfo conventions. It is included here under the GPL by +% permission from Frank Mittelbach and the LaTeX team. +% +\newcount\countUTFx +\newcount\countUTFy +\newcount\countUTFz + +\gdef\UTFviiiTwoOctets#1#2{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\endcsname} +% +\gdef\UTFviiiThreeOctets#1#2#3{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname} +% +\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname} + +\gdef\UTFviiiDefined#1{% + \ifx #1\relax + \message{\linenumber Unicode char \string #1 not defined for Texinfo}% + \else + \expandafter #1% + \fi +} + +\begingroup + \catcode`\~13 + \catcode`\"12 + + \def\UTFviiiLoop{% + \global\catcode\countUTFx\active + \uccode`\~\countUTFx + \uppercase\expandafter{\UTFviiiTmp}% + \advance\countUTFx by 1 + \ifnum\countUTFx < \countUTFy + \expandafter\UTFviiiLoop + \fi} + + \countUTFx = "C2 + \countUTFy = "E0 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiTwoOctets\string~}} + \UTFviiiLoop + + \countUTFx = "E0 + \countUTFy = "F0 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiThreeOctets\string~}} + \UTFviiiLoop + + \countUTFx = "F0 + \countUTFy = "F4 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiFourOctets\string~}} + \UTFviiiLoop +\endgroup + +\begingroup + \catcode`\"=12 + \catcode`\<=12 + \catcode`\.=12 + \catcode`\,=12 + \catcode`\;=12 + \catcode`\!=12 + \catcode`\~=13 + + \gdef\DeclareUnicodeCharacter#1#2{% + \countUTFz = "#1\relax + \wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}% + \begingroup + \parseXMLCharref + \def\UTFviiiTwoOctets##1##2{% + \csname u8:##1\string ##2\endcsname}% + \def\UTFviiiThreeOctets##1##2##3{% + \csname u8:##1\string ##2\string ##3\endcsname}% + \def\UTFviiiFourOctets##1##2##3##4{% + \csname u8:##1\string ##2\string ##3\string ##4\endcsname}% + \expandafter\expandafter\expandafter\expandafter + \expandafter\expandafter\expandafter + \gdef\UTFviiiTmp{#2}% + \endgroup} + + \gdef\parseXMLCharref{% + \ifnum\countUTFz < "A0\relax + \errhelp = \EMsimple + \errmessage{Cannot define Unicode char value < 00A0}% + \else\ifnum\countUTFz < "800\relax + \parseUTFviiiA,% + \parseUTFviiiB C\UTFviiiTwoOctets.,% + \else\ifnum\countUTFz < "10000\relax + \parseUTFviiiA;% + \parseUTFviiiA,% + \parseUTFviiiB E\UTFviiiThreeOctets.{,;}% + \else + \parseUTFviiiA;% + \parseUTFviiiA,% + \parseUTFviiiA!% + \parseUTFviiiB F\UTFviiiFourOctets.{!,;}% + \fi\fi\fi + } + + \gdef\parseUTFviiiA#1{% + \countUTFx = \countUTFz + \divide\countUTFz by 64 + \countUTFy = \countUTFz + \multiply\countUTFz by 64 + \advance\countUTFx by -\countUTFz + \advance\countUTFx by 128 + \uccode `#1\countUTFx + \countUTFz = \countUTFy} + + \gdef\parseUTFviiiB#1#2#3#4{% + \advance\countUTFz by "#10\relax + \uccode `#3\countUTFz + \uppercase{\gdef\UTFviiiTmp{#2#3#4}}} +\endgroup + +\def\utfeightchardefs{% + \DeclareUnicodeCharacter{00A0}{\tie} + \DeclareUnicodeCharacter{00A1}{\exclamdown} + \DeclareUnicodeCharacter{00A3}{\pounds} + \DeclareUnicodeCharacter{00A8}{\"{ }} + \DeclareUnicodeCharacter{00A9}{\copyright} + \DeclareUnicodeCharacter{00AA}{\ordf} + \DeclareUnicodeCharacter{00AD}{\-} + \DeclareUnicodeCharacter{00AE}{\registeredsymbol} + \DeclareUnicodeCharacter{00AF}{\={ }} + + \DeclareUnicodeCharacter{00B0}{\ringaccent{ }} + \DeclareUnicodeCharacter{00B4}{\'{ }} + \DeclareUnicodeCharacter{00B8}{\cedilla{ }} + \DeclareUnicodeCharacter{00BA}{\ordm} + \DeclareUnicodeCharacter{00BF}{\questiondown} + + \DeclareUnicodeCharacter{00C0}{\`A} + \DeclareUnicodeCharacter{00C1}{\'A} + \DeclareUnicodeCharacter{00C2}{\^A} + \DeclareUnicodeCharacter{00C3}{\~A} + \DeclareUnicodeCharacter{00C4}{\"A} + \DeclareUnicodeCharacter{00C5}{\AA} + \DeclareUnicodeCharacter{00C6}{\AE} + \DeclareUnicodeCharacter{00C7}{\cedilla{C}} + \DeclareUnicodeCharacter{00C8}{\`E} + \DeclareUnicodeCharacter{00C9}{\'E} + \DeclareUnicodeCharacter{00CA}{\^E} + \DeclareUnicodeCharacter{00CB}{\"E} + \DeclareUnicodeCharacter{00CC}{\`I} + \DeclareUnicodeCharacter{00CD}{\'I} + \DeclareUnicodeCharacter{00CE}{\^I} + \DeclareUnicodeCharacter{00CF}{\"I} + + \DeclareUnicodeCharacter{00D1}{\~N} + \DeclareUnicodeCharacter{00D2}{\`O} + \DeclareUnicodeCharacter{00D3}{\'O} + \DeclareUnicodeCharacter{00D4}{\^O} + \DeclareUnicodeCharacter{00D5}{\~O} + \DeclareUnicodeCharacter{00D6}{\"O} + \DeclareUnicodeCharacter{00D8}{\O} + \DeclareUnicodeCharacter{00D9}{\`U} + \DeclareUnicodeCharacter{00DA}{\'U} + \DeclareUnicodeCharacter{00DB}{\^U} + \DeclareUnicodeCharacter{00DC}{\"U} + \DeclareUnicodeCharacter{00DD}{\'Y} + \DeclareUnicodeCharacter{00DF}{\ss} + + \DeclareUnicodeCharacter{00E0}{\`a} + \DeclareUnicodeCharacter{00E1}{\'a} + \DeclareUnicodeCharacter{00E2}{\^a} + \DeclareUnicodeCharacter{00E3}{\~a} + \DeclareUnicodeCharacter{00E4}{\"a} + \DeclareUnicodeCharacter{00E5}{\aa} + \DeclareUnicodeCharacter{00E6}{\ae} + \DeclareUnicodeCharacter{00E7}{\cedilla{c}} + \DeclareUnicodeCharacter{00E8}{\`e} + \DeclareUnicodeCharacter{00E9}{\'e} + \DeclareUnicodeCharacter{00EA}{\^e} + \DeclareUnicodeCharacter{00EB}{\"e} + \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}} + \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}} + \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}} + \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}} + + \DeclareUnicodeCharacter{00F1}{\~n} + \DeclareUnicodeCharacter{00F2}{\`o} + \DeclareUnicodeCharacter{00F3}{\'o} + \DeclareUnicodeCharacter{00F4}{\^o} + \DeclareUnicodeCharacter{00F5}{\~o} + \DeclareUnicodeCharacter{00F6}{\"o} + \DeclareUnicodeCharacter{00F8}{\o} + \DeclareUnicodeCharacter{00F9}{\`u} + \DeclareUnicodeCharacter{00FA}{\'u} + \DeclareUnicodeCharacter{00FB}{\^u} + \DeclareUnicodeCharacter{00FC}{\"u} + \DeclareUnicodeCharacter{00FD}{\'y} + \DeclareUnicodeCharacter{00FF}{\"y} + + \DeclareUnicodeCharacter{0100}{\=A} + \DeclareUnicodeCharacter{0101}{\=a} + \DeclareUnicodeCharacter{0102}{\u{A}} + \DeclareUnicodeCharacter{0103}{\u{a}} + \DeclareUnicodeCharacter{0106}{\'C} + \DeclareUnicodeCharacter{0107}{\'c} + \DeclareUnicodeCharacter{0108}{\^C} + \DeclareUnicodeCharacter{0109}{\^c} + \DeclareUnicodeCharacter{010A}{\dotaccent{C}} + \DeclareUnicodeCharacter{010B}{\dotaccent{c}} + \DeclareUnicodeCharacter{010C}{\v{C}} + \DeclareUnicodeCharacter{010D}{\v{c}} + \DeclareUnicodeCharacter{010E}{\v{D}} + + \DeclareUnicodeCharacter{0112}{\=E} + \DeclareUnicodeCharacter{0113}{\=e} + \DeclareUnicodeCharacter{0114}{\u{E}} + \DeclareUnicodeCharacter{0115}{\u{e}} + \DeclareUnicodeCharacter{0116}{\dotaccent{E}} + \DeclareUnicodeCharacter{0117}{\dotaccent{e}} + \DeclareUnicodeCharacter{011A}{\v{E}} + \DeclareUnicodeCharacter{011B}{\v{e}} + \DeclareUnicodeCharacter{011C}{\^G} + \DeclareUnicodeCharacter{011D}{\^g} + \DeclareUnicodeCharacter{011E}{\u{G}} + \DeclareUnicodeCharacter{011F}{\u{g}} + + \DeclareUnicodeCharacter{0120}{\dotaccent{G}} + \DeclareUnicodeCharacter{0121}{\dotaccent{g}} + \DeclareUnicodeCharacter{0124}{\^H} + \DeclareUnicodeCharacter{0125}{\^h} + \DeclareUnicodeCharacter{0128}{\~I} + \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}} + \DeclareUnicodeCharacter{012A}{\=I} + \DeclareUnicodeCharacter{012B}{\={\dotless{i}}} + \DeclareUnicodeCharacter{012C}{\u{I}} + \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}} + + \DeclareUnicodeCharacter{0130}{\dotaccent{I}} + \DeclareUnicodeCharacter{0131}{\dotless{i}} + \DeclareUnicodeCharacter{0132}{IJ} + \DeclareUnicodeCharacter{0133}{ij} + \DeclareUnicodeCharacter{0134}{\^J} + \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}} + \DeclareUnicodeCharacter{0139}{\'L} + \DeclareUnicodeCharacter{013A}{\'l} + + \DeclareUnicodeCharacter{0141}{\L} + \DeclareUnicodeCharacter{0142}{\l} + \DeclareUnicodeCharacter{0143}{\'N} + \DeclareUnicodeCharacter{0144}{\'n} + \DeclareUnicodeCharacter{0147}{\v{N}} + \DeclareUnicodeCharacter{0148}{\v{n}} + \DeclareUnicodeCharacter{014C}{\=O} + \DeclareUnicodeCharacter{014D}{\=o} + \DeclareUnicodeCharacter{014E}{\u{O}} + \DeclareUnicodeCharacter{014F}{\u{o}} + + \DeclareUnicodeCharacter{0150}{\H{O}} + \DeclareUnicodeCharacter{0151}{\H{o}} + \DeclareUnicodeCharacter{0152}{\OE} + \DeclareUnicodeCharacter{0153}{\oe} + \DeclareUnicodeCharacter{0154}{\'R} + \DeclareUnicodeCharacter{0155}{\'r} + \DeclareUnicodeCharacter{0158}{\v{R}} + \DeclareUnicodeCharacter{0159}{\v{r}} + \DeclareUnicodeCharacter{015A}{\'S} + \DeclareUnicodeCharacter{015B}{\'s} + \DeclareUnicodeCharacter{015C}{\^S} + \DeclareUnicodeCharacter{015D}{\^s} + \DeclareUnicodeCharacter{015E}{\cedilla{S}} + \DeclareUnicodeCharacter{015F}{\cedilla{s}} + + \DeclareUnicodeCharacter{0160}{\v{S}} + \DeclareUnicodeCharacter{0161}{\v{s}} + \DeclareUnicodeCharacter{0162}{\cedilla{t}} + \DeclareUnicodeCharacter{0163}{\cedilla{T}} + \DeclareUnicodeCharacter{0164}{\v{T}} + + \DeclareUnicodeCharacter{0168}{\~U} + \DeclareUnicodeCharacter{0169}{\~u} + \DeclareUnicodeCharacter{016A}{\=U} + \DeclareUnicodeCharacter{016B}{\=u} + \DeclareUnicodeCharacter{016C}{\u{U}} + \DeclareUnicodeCharacter{016D}{\u{u}} + \DeclareUnicodeCharacter{016E}{\ringaccent{U}} + \DeclareUnicodeCharacter{016F}{\ringaccent{u}} + + \DeclareUnicodeCharacter{0170}{\H{U}} + \DeclareUnicodeCharacter{0171}{\H{u}} + \DeclareUnicodeCharacter{0174}{\^W} + \DeclareUnicodeCharacter{0175}{\^w} + \DeclareUnicodeCharacter{0176}{\^Y} + \DeclareUnicodeCharacter{0177}{\^y} + \DeclareUnicodeCharacter{0178}{\"Y} + \DeclareUnicodeCharacter{0179}{\'Z} + \DeclareUnicodeCharacter{017A}{\'z} + \DeclareUnicodeCharacter{017B}{\dotaccent{Z}} + \DeclareUnicodeCharacter{017C}{\dotaccent{z}} + \DeclareUnicodeCharacter{017D}{\v{Z}} + \DeclareUnicodeCharacter{017E}{\v{z}} + + \DeclareUnicodeCharacter{01C4}{D\v{Z}} + \DeclareUnicodeCharacter{01C5}{D\v{z}} + \DeclareUnicodeCharacter{01C6}{d\v{z}} + \DeclareUnicodeCharacter{01C7}{LJ} + \DeclareUnicodeCharacter{01C8}{Lj} + \DeclareUnicodeCharacter{01C9}{lj} + \DeclareUnicodeCharacter{01CA}{NJ} + \DeclareUnicodeCharacter{01CB}{Nj} + \DeclareUnicodeCharacter{01CC}{nj} + \DeclareUnicodeCharacter{01CD}{\v{A}} + \DeclareUnicodeCharacter{01CE}{\v{a}} + \DeclareUnicodeCharacter{01CF}{\v{I}} + + \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}} + \DeclareUnicodeCharacter{01D1}{\v{O}} + \DeclareUnicodeCharacter{01D2}{\v{o}} + \DeclareUnicodeCharacter{01D3}{\v{U}} + \DeclareUnicodeCharacter{01D4}{\v{u}} + + \DeclareUnicodeCharacter{01E2}{\={\AE}} + \DeclareUnicodeCharacter{01E3}{\={\ae}} + \DeclareUnicodeCharacter{01E6}{\v{G}} + \DeclareUnicodeCharacter{01E7}{\v{g}} + \DeclareUnicodeCharacter{01E8}{\v{K}} + \DeclareUnicodeCharacter{01E9}{\v{k}} + + \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}} + \DeclareUnicodeCharacter{01F1}{DZ} + \DeclareUnicodeCharacter{01F2}{Dz} + \DeclareUnicodeCharacter{01F3}{dz} + \DeclareUnicodeCharacter{01F4}{\'G} + \DeclareUnicodeCharacter{01F5}{\'g} + \DeclareUnicodeCharacter{01F8}{\`N} + \DeclareUnicodeCharacter{01F9}{\`n} + \DeclareUnicodeCharacter{01FC}{\'{\AE}} + \DeclareUnicodeCharacter{01FD}{\'{\ae}} + \DeclareUnicodeCharacter{01FE}{\'{\O}} + \DeclareUnicodeCharacter{01FF}{\'{\o}} + + \DeclareUnicodeCharacter{021E}{\v{H}} + \DeclareUnicodeCharacter{021F}{\v{h}} + + \DeclareUnicodeCharacter{0226}{\dotaccent{A}} + \DeclareUnicodeCharacter{0227}{\dotaccent{a}} + \DeclareUnicodeCharacter{0228}{\cedilla{E}} + \DeclareUnicodeCharacter{0229}{\cedilla{e}} + \DeclareUnicodeCharacter{022E}{\dotaccent{O}} + \DeclareUnicodeCharacter{022F}{\dotaccent{o}} + + \DeclareUnicodeCharacter{0232}{\=Y} + \DeclareUnicodeCharacter{0233}{\=y} + \DeclareUnicodeCharacter{0237}{\dotless{j}} + + \DeclareUnicodeCharacter{1E02}{\dotaccent{B}} + \DeclareUnicodeCharacter{1E03}{\dotaccent{b}} + \DeclareUnicodeCharacter{1E04}{\udotaccent{B}} + \DeclareUnicodeCharacter{1E05}{\udotaccent{b}} + \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}} + \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}} + \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}} + \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}} + \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}} + \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}} + \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}} + \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}} + + \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}} + \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}} + + \DeclareUnicodeCharacter{1E20}{\=G} + \DeclareUnicodeCharacter{1E21}{\=g} + \DeclareUnicodeCharacter{1E22}{\dotaccent{H}} + \DeclareUnicodeCharacter{1E23}{\dotaccent{h}} + \DeclareUnicodeCharacter{1E24}{\udotaccent{H}} + \DeclareUnicodeCharacter{1E25}{\udotaccent{h}} + \DeclareUnicodeCharacter{1E26}{\"H} + \DeclareUnicodeCharacter{1E27}{\"h} + + \DeclareUnicodeCharacter{1E30}{\'K} + \DeclareUnicodeCharacter{1E31}{\'k} + \DeclareUnicodeCharacter{1E32}{\udotaccent{K}} + \DeclareUnicodeCharacter{1E33}{\udotaccent{k}} + \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}} + \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}} + \DeclareUnicodeCharacter{1E36}{\udotaccent{L}} + \DeclareUnicodeCharacter{1E37}{\udotaccent{l}} + \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}} + \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}} + \DeclareUnicodeCharacter{1E3E}{\'M} + \DeclareUnicodeCharacter{1E3F}{\'m} + + \DeclareUnicodeCharacter{1E40}{\dotaccent{M}} + \DeclareUnicodeCharacter{1E41}{\dotaccent{m}} + \DeclareUnicodeCharacter{1E42}{\udotaccent{M}} + \DeclareUnicodeCharacter{1E43}{\udotaccent{m}} + \DeclareUnicodeCharacter{1E44}{\dotaccent{N}} + \DeclareUnicodeCharacter{1E45}{\dotaccent{n}} + \DeclareUnicodeCharacter{1E46}{\udotaccent{N}} + \DeclareUnicodeCharacter{1E47}{\udotaccent{n}} + \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}} + \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}} + + \DeclareUnicodeCharacter{1E54}{\'P} + \DeclareUnicodeCharacter{1E55}{\'p} + \DeclareUnicodeCharacter{1E56}{\dotaccent{P}} + \DeclareUnicodeCharacter{1E57}{\dotaccent{p}} + \DeclareUnicodeCharacter{1E58}{\dotaccent{R}} + \DeclareUnicodeCharacter{1E59}{\dotaccent{r}} + \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}} + \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}} + \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}} + \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}} + + \DeclareUnicodeCharacter{1E60}{\dotaccent{S}} + \DeclareUnicodeCharacter{1E61}{\dotaccent{s}} + \DeclareUnicodeCharacter{1E62}{\udotaccent{S}} + \DeclareUnicodeCharacter{1E63}{\udotaccent{s}} + \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}} + \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}} + \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}} + \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}} + \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}} + \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}} + + \DeclareUnicodeCharacter{1E7C}{\~V} + \DeclareUnicodeCharacter{1E7D}{\~v} + \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}} + \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}} + + \DeclareUnicodeCharacter{1E80}{\`W} + \DeclareUnicodeCharacter{1E81}{\`w} + \DeclareUnicodeCharacter{1E82}{\'W} + \DeclareUnicodeCharacter{1E83}{\'w} + \DeclareUnicodeCharacter{1E84}{\"W} + \DeclareUnicodeCharacter{1E85}{\"w} + \DeclareUnicodeCharacter{1E86}{\dotaccent{W}} + \DeclareUnicodeCharacter{1E87}{\dotaccent{w}} + \DeclareUnicodeCharacter{1E88}{\udotaccent{W}} + \DeclareUnicodeCharacter{1E89}{\udotaccent{w}} + \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}} + \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}} + \DeclareUnicodeCharacter{1E8C}{\"X} + \DeclareUnicodeCharacter{1E8D}{\"x} + \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}} + \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}} + + \DeclareUnicodeCharacter{1E90}{\^Z} + \DeclareUnicodeCharacter{1E91}{\^z} + \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}} + \DeclareUnicodeCharacter{1E93}{\udotaccent{z}} + \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}} + \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}} + \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}} + \DeclareUnicodeCharacter{1E97}{\"t} + \DeclareUnicodeCharacter{1E98}{\ringaccent{w}} + \DeclareUnicodeCharacter{1E99}{\ringaccent{y}} + + \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}} + \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}} + + \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}} + \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}} + \DeclareUnicodeCharacter{1EBC}{\~E} + \DeclareUnicodeCharacter{1EBD}{\~e} + + \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}} + \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}} + \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}} + \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}} + + \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}} + \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}} + + \DeclareUnicodeCharacter{1EF2}{\`Y} + \DeclareUnicodeCharacter{1EF3}{\`y} + \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}} + + \DeclareUnicodeCharacter{1EF8}{\~Y} + \DeclareUnicodeCharacter{1EF9}{\~y} + + \DeclareUnicodeCharacter{2013}{--} + \DeclareUnicodeCharacter{2014}{---} + \DeclareUnicodeCharacter{2022}{\bullet} + \DeclareUnicodeCharacter{2026}{\dots} + \DeclareUnicodeCharacter{20AC}{\euro} + + \DeclareUnicodeCharacter{2192}{\expansion} + \DeclareUnicodeCharacter{21D2}{\result} + + \DeclareUnicodeCharacter{2212}{\minus} + \DeclareUnicodeCharacter{2217}{\point} + \DeclareUnicodeCharacter{2261}{\equiv} +}% end of \utfeightchardefs + + +% US-ASCII character definitions. +\def\asciichardefs{% nothing need be done + \relax +} + +% Make non-ASCII characters printable again for compatibility with +% existing Texinfo documents that may use them, even without declaring a +% document encoding. +% +\setnonasciicharscatcode \other + + +\message{formatting,} + +\newdimen\defaultparindent \defaultparindent = 15pt + +\chapheadingskip = 15pt plus 4pt minus 2pt +\secheadingskip = 12pt plus 3pt minus 2pt +\subsecheadingskip = 9pt plus 2pt minus 2pt + +% Prevent underfull vbox error messages. +\vbadness = 10000 + +% Don't be so finicky about underfull hboxes, either. +\hbadness = 2000 + +% Following George Bush, just get rid of widows and orphans. +\widowpenalty=10000 +\clubpenalty=10000 + +% Use TeX 3.0's \emergencystretch to help line breaking, but if we're +% using an old version of TeX, don't do anything. We want the amount of +% stretch added to depend on the line length, hence the dependence on +% \hsize. We call this whenever the paper size is set. +% +\def\setemergencystretch{% + \ifx\emergencystretch\thisisundefined + % Allow us to assign to \emergencystretch anyway. + \def\emergencystretch{\dimen0}% + \else + \emergencystretch = .15\hsize + \fi +} + +% Parameters in order: 1) textheight; 2) textwidth; +% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip; +% 7) physical page height; 8) physical page width. +% +% We also call \setleading{\textleading}, so the caller should define +% \textleading. The caller should also set \parskip. +% +\def\internalpagesizes#1#2#3#4#5#6#7#8{% + \voffset = #3\relax + \topskip = #6\relax + \splittopskip = \topskip + % + \vsize = #1\relax + \advance\vsize by \topskip + \outervsize = \vsize + \advance\outervsize by 2\topandbottommargin + \pageheight = \vsize + % + \hsize = #2\relax + \outerhsize = \hsize + \advance\outerhsize by 0.5in + \pagewidth = \hsize + % + \normaloffset = #4\relax + \bindingoffset = #5\relax + % + \ifpdf + \pdfpageheight #7\relax + \pdfpagewidth #8\relax + \fi + % + \setleading{\textleading} + % + \parindent = \defaultparindent + \setemergencystretch +} + +% @letterpaper (the default). +\def\letterpaper{{\globaldefs = 1 + \parskip = 3pt plus 2pt minus 1pt + \textleading = 13.2pt + % + % If page is nothing but text, make it come out even. + \internalpagesizes{46\baselineskip}{6in}% + {\voffset}{.25in}% + {\bindingoffset}{36pt}% + {11in}{8.5in}% +}} + +% Use @smallbook to reset parameters for 7x9.25 trim size. +\def\smallbook{{\globaldefs = 1 + \parskip = 2pt plus 1pt + \textleading = 12pt + % + \internalpagesizes{7.5in}{5in}% + {\voffset}{.25in}% + {\bindingoffset}{16pt}% + {9.25in}{7in}% + % + \lispnarrowing = 0.3in + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = .5cm +}} + +% Use @smallerbook to reset parameters for 6x9 trim size. +% (Just testing, parameters still in flux.) +\def\smallerbook{{\globaldefs = 1 + \parskip = 1.5pt plus 1pt + \textleading = 12pt + % + \internalpagesizes{7.4in}{4.8in}% + {-.2in}{-.4in}% + {0pt}{14pt}% + {9in}{6in}% + % + \lispnarrowing = 0.25in + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = .4cm +}} + +% Use @afourpaper to print on European A4 paper. +\def\afourpaper{{\globaldefs = 1 + \parskip = 3pt plus 2pt minus 1pt + \textleading = 13.2pt + % + % Double-side printing via postscript on Laserjet 4050 + % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm. + % To change the settings for a different printer or situation, adjust + % \normaloffset until the front-side and back-side texts align. Then + % do the same for \bindingoffset. You can set these for testing in + % your texinfo source file like this: + % @tex + % \global\normaloffset = -6mm + % \global\bindingoffset = 10mm + % @end tex + \internalpagesizes{51\baselineskip}{160mm} + {\voffset}{\hoffset}% + {\bindingoffset}{44pt}% + {297mm}{210mm}% + % + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = 5mm +}} + +% Use @afivepaper to print on European A5 paper. +% From romildo@urano.iceb.ufop.br, 2 July 2000. +% He also recommends making @example and @lisp be small. +\def\afivepaper{{\globaldefs = 1 + \parskip = 2pt plus 1pt minus 0.1pt + \textleading = 12.5pt + % + \internalpagesizes{160mm}{120mm}% + {\voffset}{\hoffset}% + {\bindingoffset}{8pt}% + {210mm}{148mm}% + % + \lispnarrowing = 0.2in + \tolerance = 800 + \hfuzz = 1.2pt + \contentsrightmargin = 0pt + \defbodyindent = 2mm + \tableindent = 12mm +}} + +% A specific text layout, 24x15cm overall, intended for A4 paper. +\def\afourlatex{{\globaldefs = 1 + \afourpaper + \internalpagesizes{237mm}{150mm}% + {\voffset}{4.6mm}% + {\bindingoffset}{7mm}% + {297mm}{210mm}% + % + % Must explicitly reset to 0 because we call \afourpaper. + \globaldefs = 0 +}} + +% Use @afourwide to print on A4 paper in landscape format. +\def\afourwide{{\globaldefs = 1 + \afourpaper + \internalpagesizes{241mm}{165mm}% + {\voffset}{-2.95mm}% + {\bindingoffset}{7mm}% + {297mm}{210mm}% + \globaldefs = 0 +}} + +% @pagesizes TEXTHEIGHT[,TEXTWIDTH] +% Perhaps we should allow setting the margins, \topskip, \parskip, +% and/or leading, also. Or perhaps we should compute them somehow. +% +\parseargdef\pagesizes{\pagesizesyyy #1,,\finish} +\def\pagesizesyyy#1,#2,#3\finish{{% + \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi + \globaldefs = 1 + % + \parskip = 3pt plus 2pt minus 1pt + \setleading{\textleading}% + % + \dimen0 = #1 + \advance\dimen0 by \voffset + % + \dimen2 = \hsize + \advance\dimen2 by \normaloffset + % + \internalpagesizes{#1}{\hsize}% + {\voffset}{\normaloffset}% + {\bindingoffset}{44pt}% + {\dimen0}{\dimen2}% +}} + +% Set default to letter. +% +\letterpaper + + +\message{and turning on texinfo input format.} + +% Define macros to output various characters with catcode for normal text. +\catcode`\"=\other +\catcode`\~=\other +\catcode`\^=\other +\catcode`\_=\other +\catcode`\|=\other +\catcode`\<=\other +\catcode`\>=\other +\catcode`\+=\other +\catcode`\$=\other +\def\normaldoublequote{"} +\def\normaltilde{~} +\def\normalcaret{^} +\def\normalunderscore{_} +\def\normalverticalbar{|} +\def\normalless{<} +\def\normalgreater{>} +\def\normalplus{+} +\def\normaldollar{$}%$ font-lock fix + +% This macro is used to make a character print one way in \tt +% (where it can probably be output as-is), and another way in other fonts, +% where something hairier probably needs to be done. +% +% #1 is what to print if we are indeed using \tt; #2 is what to print +% otherwise. Since all the Computer Modern typewriter fonts have zero +% interword stretch (and shrink), and it is reasonable to expect all +% typewriter fonts to have this, we can check that font parameter. +% +\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi} + +% Same as above, but check for italic font. Actually this also catches +% non-italic slanted fonts since it is impossible to distinguish them from +% italic fonts. But since this is only used by $ and it uses \sl anyway +% this is not a problem. +\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi} + +% Turn off all special characters except @ +% (and those which the user can use as if they were ordinary). +% Most of these we simply print from the \tt font, but for some, we can +% use math or other variants that look better in normal text. + +\catcode`\"=\active +\def\activedoublequote{{\tt\char34}} +\let"=\activedoublequote +\catcode`\~=\active +\def~{{\tt\char126}} +\chardef\hat=`\^ +\catcode`\^=\active +\def^{{\tt \hat}} + +\catcode`\_=\active +\def_{\ifusingtt\normalunderscore\_} +\let\realunder=_ +% Subroutine for the previous macro. +\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em } + +\catcode`\|=\active +\def|{{\tt\char124}} +\chardef \less=`\< +\catcode`\<=\active +\def<{{\tt \less}} +\chardef \gtr=`\> +\catcode`\>=\active +\def>{{\tt \gtr}} +\catcode`\+=\active +\def+{{\tt \char 43}} +\catcode`\$=\active +\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix + +% If a .fmt file is being used, characters that might appear in a file +% name cannot be active until we have parsed the command line. +% So turn them off again, and have \everyjob (or @setfilename) turn them on. +% \otherifyactive is called near the end of this file. +\def\otherifyactive{\catcode`+=\other \catcode`\_=\other} + +% Used sometimes to turn off (effectively) the active characters even after +% parsing them. +\def\turnoffactive{% + \normalturnoffactive + \otherbackslash +} + +\catcode`\@=0 + +% \backslashcurfont outputs one backslash character in current font, +% as in \char`\\. +\global\chardef\backslashcurfont=`\\ +\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work + +% \realbackslash is an actual character `\' with catcode other, and +% \doublebackslash is two of them (for the pdf outlines). +{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}} + +% In texinfo, backslash is an active character; it prints the backslash +% in fixed width font. +\catcode`\\=\active +@def@normalbackslash{{@tt@backslashcurfont}} +% On startup, @fixbackslash assigns: +% @let \ = @normalbackslash + +% \rawbackslash defines an active \ to do \backslashcurfont. +% \otherbackslash defines an active \ to be a literal `\' character with +% catcode other. +@gdef@rawbackslash{@let\=@backslashcurfont} +@gdef@otherbackslash{@let\=@realbackslash} + +% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of +% the literal character `\'. +% +@def@normalturnoffactive{% + @let\=@normalbackslash + @let"=@normaldoublequote + @let~=@normaltilde + @let^=@normalcaret + @let_=@normalunderscore + @let|=@normalverticalbar + @let<=@normalless + @let>=@normalgreater + @let+=@normalplus + @let$=@normaldollar %$ font-lock fix + @unsepspaces +} + +% Make _ and + \other characters, temporarily. +% This is canceled by @fixbackslash. +@otherifyactive + +% If a .fmt file is being used, we don't want the `\input texinfo' to show up. +% That is what \eatinput is for; after that, the `\' should revert to printing +% a backslash. +% +@gdef@eatinput input texinfo{@fixbackslash} +@global@let\ = @eatinput + +% On the other hand, perhaps the file did not have a `\input texinfo'. Then +% the first `\' in the file would cause an error. This macro tries to fix +% that, assuming it is called before the first `\' could plausibly occur. +% Also turn back on active characters that might appear in the input +% file name, in case not using a pre-dumped format. +% +@gdef@fixbackslash{% + @ifx\@eatinput @let\ = @normalbackslash @fi + @catcode`+=@active + @catcode`@_=@active +} + +% Say @foo, not \foo, in error messages. +@escapechar = `@@ + +% These look ok in all fonts, so just make them not special. +@catcode`@& = @other +@catcode`@# = @other +@catcode`@% = @other + + +@c Local variables: +@c eval: (add-hook 'write-file-hooks 'time-stamp) +@c page-delimiter: "^\\\\message" +@c time-stamp-start: "def\\\\texinfoversion{" +@c time-stamp-format: "%:y-%02m-%02d.%02H" +@c time-stamp-end: "}" +@c End: + +@c vim:sw=2: + +@ignore + arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115 +@end ignore diff --git a/config.h.in b/config.h.in new file mode 100644 index 0000000..5ecb3d3 --- /dev/null +++ b/config.h.in @@ -0,0 +1,343 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* GIT commit id revision used to build this package */ +#undef BUILD_REVISION + +/* The time this package was configured for a build */ +#undef BUILD_TIMESTAMP + +/* Defined to use log_clock timestamps */ +#undef ENABLE_LOG_CLOCK + +/* Define to 1 if translation of program messages to the user's native + language is requested. */ +#undef ENABLE_NLS + +/* Define to use the GNU C visibility attribute. */ +#undef GPGRT_USE_VISIBILITY + +/* Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the + CoreFoundation framework. */ +#undef HAVE_CFLOCALECOPYCURRENT + +/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in + the CoreFoundation framework. */ +#undef HAVE_CFPREFERENCESCOPYAPPVALUE + +/* Define if the GNU dcgettext() function is already present or preinstalled. + */ +#undef HAVE_DCGETTEXT + +/* Define to 1 if you have the declaration of `strerror_r', and to 0 if you + don't. */ +#undef HAVE_DECL_STRERROR_R + +/* Define to 1 if you have the header file. */ +#undef HAVE_DIRECT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + +/* Define to 1 if you have the `flockfile' function. */ +#undef HAVE_FLOCKFILE + +/* Define to 1 if you have the `fork' function. */ +#undef HAVE_FORK + +/* Defined if a GCC style "__attribute__ ((aligned (n))" is supported */ +#undef HAVE_GCC_ATTRIBUTE_ALIGNED + +/* Define to 1 if you have the `getrlimit' function. */ +#undef HAVE_GETRLIMIT + +/* Define if the GNU gettext() function is already present or preinstalled. */ +#undef HAVE_GETTEXT + +/* Define if you have the iconv() function and it works. */ +#undef HAVE_ICONV + +/* Define to 1 if the system has the type `intmax_t'. */ +#undef HAVE_INTMAX_T + +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* Define if you have and nl_langinfo(THOUSANDS_SEP). */ +#undef HAVE_LANGINFO_THOUSANDS_SEP + +/* Define to 1 if you have a fully functional readline library. */ +#undef HAVE_LIBREADLINE + +/* Define to 1 if you have the header file. */ +#undef HAVE_LOCALE_H + +/* Define to 1 if the system has the type `long double'. */ +#undef HAVE_LONG_DOUBLE + +/* Define to 1 if the system has the type 'long long int'. */ +#undef HAVE_LONG_LONG_INT + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the `memrchr' function. */ +#undef HAVE_MEMRCHR + +/* Define to 1 if you have the `mmap' function. */ +#undef HAVE_MMAP + +/* Define if the defines PTHREAD_MUTEX_RECURSIVE. */ +#undef HAVE_PTHREAD_MUTEX_RECURSIVE + +/* Define if the POSIX multithreading library has read/write locks. */ +#undef HAVE_PTHREAD_RWLOCK + +/* Define to 1 if the system has the type `ptrdiff_t'. */ +#undef HAVE_PTRDIFF_T + +/* Define to 1 if you have the `rand' function. */ +#undef HAVE_RAND + +/* Define to 1 if you have the `setenv' function. */ +#undef HAVE_SETENV + +/* Define to 1 if you have the header file. */ +#undef HAVE_SIGNAL_H + +/* Define to 1 if you have the `stat' function. */ +#undef HAVE_STAT + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the `stpcpy' function. */ +#undef HAVE_STPCPY + +/* Define to 1 if you have the `strerror_r' function. */ +#undef HAVE_STRERROR_R + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the `strlwr' function. */ +#undef HAVE_STRLWR + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_SELECT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TIME_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if the system has the type `uintmax_t'. */ +#undef HAVE_UINTMAX_T + +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Define to 1 if the system has the type 'unsigned long long int'. */ +#undef HAVE_UNSIGNED_LONG_LONG_INT + +/* Define to 1 if you have the `vasprintf' function. */ +#undef HAVE_VASPRINTF + +/* Define to 1 if you have the `vfork' function. */ +#undef HAVE_VFORK + +/* Define to 1 if you have the header file. */ +#undef HAVE_VFORK_H + +/* Defined if we run on WindowsCE */ +#undef HAVE_W32CE_SYSTEM + +/* Defined if we run on a W32 API based system */ +#undef HAVE_W32_SYSTEM + +/* Defined if we run on 64 bit W32 API system */ +#undef HAVE_W64_SYSTEM + +/* Define to 1 if `fork' works. */ +#undef HAVE_WORKING_FORK + +/* Define to 1 if `vfork' works. */ +#undef HAVE_WORKING_VFORK + +/* The host triplet */ +#undef HOST_TRIPLET_STRING + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#undef LT_OBJDIR + +/* Defined if mkdir() does not take permission flags */ +#undef MKDIR_TAKES_ONE_ARG + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Define if the pthread_in_use() detection is hard. */ +#undef PTHREAD_IN_USE_DETECTION_HARD + +/* Used by mkheader to insert the replacement type. */ +#undef REPLACEMENT_FOR_OFF_T + +/* The size of `int', as computed by sizeof. */ +#undef SIZEOF_INT + +/* The size of `long', as computed by sizeof. */ +#undef SIZEOF_LONG + +/* The size of `long long', as computed by sizeof. */ +#undef SIZEOF_LONG_LONG + +/* The size of `pthread_mutex_t', as computed by sizeof. */ +#undef SIZEOF_PTHREAD_MUTEX_T + +/* The size of `time_t', as computed by sizeof. */ +#undef SIZEOF_TIME_T + +/* The size of `unsigned long', as computed by sizeof. */ +#undef SIZEOF_UNSIGNED_LONG + +/* The size of `void *', as computed by sizeof. */ +#undef SIZEOF_VOID_P + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define to 1 if strerror_r returns char *. */ +#undef STRERROR_R_CHAR_P + +/* Define to 1 if you can safely include both and . */ +#undef TIME_WITH_SYS_TIME + +/* Define if the POSIX multithreading library can be used. */ +#undef USE_POSIX_THREADS + +/* Define if references to the POSIX multithreading library should be made + weak. */ +#undef USE_POSIX_THREADS_WEAK + +/* Define if the old Solaris multithreading library can be used. */ +#undef USE_SOLARIS_THREADS + +/* Define if references to the old Solaris multithreading library should be + made weak. */ +#undef USE_SOLARIS_THREADS_WEAK + +/* Enable extensions on AIX 3, Interix. */ +#ifndef _ALL_SOURCE +# undef _ALL_SOURCE +#endif +/* Enable GNU extensions on systems that have them. */ +#ifndef _GNU_SOURCE +# undef _GNU_SOURCE +#endif +/* Enable threading extensions on Solaris. */ +#ifndef _POSIX_PTHREAD_SEMANTICS +# undef _POSIX_PTHREAD_SEMANTICS +#endif +/* Enable extensions on HP NonStop. */ +#ifndef _TANDEM_SOURCE +# undef _TANDEM_SOURCE +#endif +/* Enable general extensions on Solaris. */ +#ifndef __EXTENSIONS__ +# undef __EXTENSIONS__ +#endif + + +/* Define if the native Windows multithreading API can be used. */ +#undef USE_WINDOWS_THREADS + +/* Version number of package */ +#undef VERSION + +/* Expose all libc features (__DARWIN_C_FULL). */ +#undef _DARWIN_C_SOURCE + +/* Enable large inode numbers on Mac OS X 10.5. */ +#ifndef _DARWIN_USE_64_BIT_INODE +# define _DARWIN_USE_64_BIT_INODE 1 +#endif + +/* Number of bits in a file offset, on hosts where this is settable. */ +#undef _FILE_OFFSET_BITS + +/* Define for large files, on AIX-style hosts. */ +#undef _LARGE_FILES + +/* Define to 1 if on MINIX. */ +#undef _MINIX + +/* Define to 2 if the system does not provide POSIX.1 features except with + this defined. */ +#undef _POSIX_1_SOURCE + +/* Define to 1 if you need to in order for `stat' and other things to work. */ +#undef _POSIX_SOURCE + +/* Define to empty if `const' does not conform to ANSI C. */ +#undef const + +/* Define to the widest signed integer type if and do + not define. */ +#undef intmax_t + +/* Define to `int' if does not define. */ +#undef pid_t + +/* Define to the widest unsigned integer type if and + do not define. */ +#undef uintmax_t + +/* Define as `fork' if `vfork' does not work. */ +#undef vfork + + +/* Force using of NLS for W32 even if no libintl has been found. This is + okay because we have our own gettext implementation for W32. */ +#if defined(HAVE_W32_SYSTEM) && !defined(ENABLE_NLS) +#define ENABLE_NLS 1 +#endif + +/* Connect the generic estream-printf.c to our framework. */ +#define _ESTREAM_PRINTF_REALLOC _gpgrt_realloc +#define _ESTREAM_PRINTF_EXTRA_INCLUDE "gpgrt-int.h" + +/* For building we need to define these macro. */ +#define GPG_ERR_ENABLE_GETTEXT_MACROS 1 +#define GPG_ERR_ENABLE_ERRNO_MACROS 1 +#define GPGRT_ENABLE_ES_MACROS 1 +#define GPGRT_ENABLE_LOG_MACROS 1 +#define GPGRT_ENABLE_ARGPARSE_MACROS 1 + diff --git a/configure b/configure new file mode 100755 index 0000000..8e66f5d --- /dev/null +++ b/configure @@ -0,0 +1,20330 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for libgpg-error 1.31. +# +# Report bugs to . +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: https://bugs.gnupg.org about your system, including any +$0: error possibly output before this message. Then install +$0: a modern shell, or manually run the script under such a +$0: shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + +SHELL=${CONFIG_SHELL-/bin/sh} + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='libgpg-error' +PACKAGE_TARNAME='libgpg-error' +PACKAGE_VERSION='1.31' +PACKAGE_STRING='libgpg-error 1.31' +PACKAGE_BUGREPORT='https://bugs.gnupg.org' +PACKAGE_URL='' + +ac_unique_file="src/err-sources.h.in" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +gl_use_threads_default= +gt_needs= +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +BUILD_TESTS_FALSE +BUILD_TESTS_TRUE +BUILD_DOC_FALSE +BUILD_DOC_TRUE +LANGUAGES_SOME_FALSE +LANGUAGES_SOME_TRUE +BUILD_TIMESTAMP +BUILD_FILEVERSION +BUILD_VERSION +BUILD_REVISION +BUILD_GPGSCM_FALSE +BUILD_GPGSCM_TRUE +FORCE_USE_SYSCFG_FALSE +FORCE_USE_SYSCFG_TRUE +CROSS_COMPILING_FALSE +CROSS_COMPILING_TRUE +HAVE_W32CE_SYSTEM_FALSE +HAVE_W32CE_SYSTEM_TRUE +HAVE_W64_SYSTEM_FALSE +HAVE_W64_SYSTEM_TRUE +HAVE_W32_SYSTEM_FALSE +HAVE_W32_SYSTEM_TRUE +GPG_ERROR_CONFIG_HOST +GPG_ERROR_CONFIG_ISUBDIRAFTER +GPG_ERROR_CONFIG_MT_CFLAGS +GPG_ERROR_CONFIG_MT_LIBS +GPG_ERROR_CONFIG_CFLAGS +GPG_ERROR_CONFIG_LIBS +LIBREADLINE +LIB_NETWORK +LIB_SCHED_YIELD +LTLIBMULTITHREAD +LIBMULTITHREAD +LTLIBTHREAD +LIBTHREAD +HAVE_LD_VERSION_SCRIPT_FALSE +HAVE_LD_VERSION_SCRIPT_TRUE +POSUB +LTLIBINTL +LIBINTL +INTLLIBS +LTLIBICONV +LIBICONV +INTL_MACOSX_LIBS +XGETTEXT_EXTRA_OPTIONS +MSGMERGE +XGETTEXT_015 +XGETTEXT +GMSGFMT_015 +MSGFMT_015 +GMSGFMT +MSGFMT +GETTEXT_MACRO_VERSION +USE_NLS +HAVE_YAT2M_FALSE +HAVE_YAT2M_TRUE +YAT2M +CC_FOR_BUILD +RC +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +RANLIB +ac_ct_AR +LN_S +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +SED +LIBTOOL +OBJDUMP +DLLTOOL +AS +EGREP +GREP +AR +CPP +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +VERSION_NUMBER +LIBGPG_ERROR_LT_REVISION +LIBGPG_ERROR_LT_AGE +LIBGPG_ERROR_LT_CURRENT +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_maintainer_mode +enable_dependency_tracking +enable_threads +enable_largefile +enable_static +enable_shared +with_pic +enable_fast_install +with_gnu_ld +with_sysroot +enable_libtool_lock +enable_nls +enable_rpath +with_libiconv_prefix +with_libintl_prefix +enable_ld_version_script +with_readline +enable_log_clock +enable_werror +enable_build_timestamp +enable_languages +enable_doc +enable_tests +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP +CC_FOR_BUILD +YAT2M' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures libgpg-error 1.31 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/libgpg-error] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of libgpg-error 1.31:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-maintainer-mode + enable make rules and dependencies not useful (and + sometimes confusing) to the casual installer + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + --enable-threads={posix|solaris|windows} + specify multithreading API + --disable-threads build without multithread safety + --disable-largefile omit support for large files + --enable-static[=PKGS] build static libraries [default=no] + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --disable-nls do not use Native Language Support + --disable-rpath do not hardcode runtime library paths + --enable-ld-version-script + enable/disable use of linker version script. + (default is system dependent) + --enable-log-clock enable log_clock timestamps + --enable-werror append -Werror to CFLAGS + --enable-build-timestamp + set an explicit build timestamp for reproducibility. + (default is the current time in ISO-8601 format) + --disable-languages do not build support for other languages than C + --disable-doc do not build the documentation + --disable-tests do not build the tests + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-sysroot=DIR Search for dependent libraries within DIR + (or the compiler's sysroot if not specified). + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib + --without-libiconv-prefix don't search for libiconv in includedir and libdir + --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib + --without-libintl-prefix don't search for libintl in includedir and libdir + --with-readline=DIR look for the readline library in DIR + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor + CC_FOR_BUILD + build system C compiler + YAT2M tool to convert texi to man pages + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +libgpg-error configure 1.31 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} +( $as_echo "## ------------------------------------- ## +## Report this to https://bugs.gnupg.org ## +## ------------------------------------- ##" + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES +# --------------------------------------------- +# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR +# accordingly. +ac_fn_c_check_decl () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + as_decl_name=`echo $2|sed 's/ *(.*//'` + as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'` + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5 +$as_echo_n "checking whether $as_decl_name is declared... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +#ifndef $as_decl_name +#ifdef __cplusplus + (void) $as_decl_use; +#else + (void) $as_decl_name; +#endif +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_decl + +# ac_fn_c_check_type LINENO TYPE VAR INCLUDES +# ------------------------------------------- +# Tests whether TYPE exists after having included INCLUDES, setting cache +# variable VAR accordingly. +ac_fn_c_check_type () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_type + +# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES +# -------------------------------------------- +# Tries to find the compile-time value of EXPR in a program that includes +# INCLUDES, setting VAR accordingly. Returns whether the value could be +# computed +ac_fn_c_compute_int () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) >= 0)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_lo=0 ac_mid=0 + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) <= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=$ac_mid; break +else + as_fn_arith $ac_mid + 1 && ac_lo=$as_val + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) < 0)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=-1 ac_mid=-1 + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) >= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_lo=$ac_mid; break +else + as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + ac_lo= ac_hi= +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) <= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=$ac_mid +else + as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in #(( +?*) eval "$3=\$ac_lo"; ac_retval=0 ;; +'') ac_retval=1 ;; +esac + else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +static long int longval () { return $2; } +static unsigned long int ulongval () { return $2; } +#include +#include +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + return 1; + if (($2) < 0) + { + long int i = longval (); + if (i != ($2)) + return 1; + fprintf (f, "%ld", i); + } + else + { + unsigned long int i = ulongval (); + if (i != ($2)) + return 1; + fprintf (f, "%lu", i); + } + /* Do not output a trailing newline, as this causes \r\n confusion + on some platforms. */ + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + echo >>conftest.val; read $3 config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by libgpg-error $as_me 1.31, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +gt_needs="$gt_needs " +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# LT Version numbers, remember to change them just *before* a release. +# (Code changed: REVISION++) +# (Interfaces added/removed/changed: CURRENT++, REVISION=0) +# (Interfaces added: AGE++) +# (Interfaces removed: AGE=0) +# Note that added error codes don't constitute an interface change. +LIBGPG_ERROR_LT_CURRENT=24 +LIBGPG_ERROR_LT_AGE=24 +LIBGPG_ERROR_LT_REVISION=2 +################################################ + + + + + +VERSION_NUMBER=0x011f00 + + +ac_aux_dir= +for ac_dir in build-aux "$srcdir"/build-aux; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +am__api_version='1.14' + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='libgpg-error' + VERSION='1.31' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' + +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + + + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then : + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + + +ac_config_headers="$ac_config_headers config.h" + + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + + +# We need to know about the host architecture to avoid spurious +# warnings. +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: autobuild project... ${PACKAGE_NAME:-$PACKAGE}" >&5 +$as_echo "$as_me: autobuild project... ${PACKAGE_NAME:-$PACKAGE}" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: autobuild revision... ${PACKAGE_VERSION:-$VERSION}" >&5 +$as_echo "$as_me: autobuild revision... ${PACKAGE_VERSION:-$VERSION}" >&6;} + hostname=`hostname` + if test "$hostname"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: autobuild hostname... $hostname" >&5 +$as_echo "$as_me: autobuild hostname... $hostname" >&6;} + fi + + date=`date +%Y%m%d-%H%M%S` + if test "$?" != 0; then + date=`date` + fi + if test "$date"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: autobuild timestamp... $date" >&5 +$as_echo "$as_me: autobuild timestamp... $date" >&6;} + fi + + +# Checks for programs. +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AR" = x; then + AR=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +else + AR="$ac_cv_prog_AR" +fi + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default" +if test "x$ac_cv_header_minix_config_h" = xyes; then : + MINIX=yes +else + MINIX= +fi + + + if test "$MINIX" = yes; then + +$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h + + +$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h + + +$as_echo "#define _MINIX 1" >>confdefs.h + + fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5 +$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; } +if ${ac_cv_safe_to_define___extensions__+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +# define __EXTENSIONS__ 1 + $ac_includes_default +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_safe_to_define___extensions__=yes +else + ac_cv_safe_to_define___extensions__=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5 +$as_echo "$ac_cv_safe_to_define___extensions__" >&6; } + test $ac_cv_safe_to_define___extensions__ = yes && + $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h + + $as_echo "#define _ALL_SOURCE 1" >>confdefs.h + + $as_echo "#define _GNU_SOURCE 1" >>confdefs.h + + $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h + + $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h + + + + +# Set some variables depending on the platform for later use. +have_w32_system=no +have_w64_system=no +have_w32ce_system=no +case "${host}" in + x86_64-*mingw32*) + have_w32_system=yes + have_w64_system=yes + ;; + *-mingw32ce*) + have_w32_system=yes + have_w32ce_system=yes + ;; + *-mingw32*) + have_w32_system=yes + ;; + *-apple-darwin*) + # This is the equivalent of the _GNU_SOURCE feature-test-macro + # on GNU libc systems. + +$as_echo "#define _DARWIN_C_SOURCE 900000L" >>confdefs.h + + ;; + *) + ;; +esac + + +if test "$have_w32_system" != yes; then + + + + + THREADLIB_CPPFLAGS="" + + # Check whether --enable-threads was given. +if test "${enable_threads+set}" = set; then : + enableval=$enable_threads; gl_use_threads=$enableval +else + if test -n "$gl_use_threads_default"; then + gl_use_threads="$gl_use_threads_default" + else + case "$host_os" in + osf*) gl_use_threads=no ;; + cygwin*) + case `uname -r` in + 1.[0-5].*) gl_use_threads=no ;; + *) gl_use_threads=yes ;; + esac + ;; + *) gl_use_threads=yes ;; + esac + fi + +fi + + if test "$gl_use_threads" = yes || test "$gl_use_threads" = posix; then + # For using : + case "$host_os" in + osf*) + # On OSF/1, the compiler needs the flag -D_REENTRANT so that it + # groks . cc also understands the flag -pthread, but + # we don't use it because 1. gcc-2.95 doesn't understand -pthread, + # 2. putting a flag into CPPFLAGS that has an effect on the linker + # causes the AC_LINK_IFELSE test below to succeed unexpectedly, + # leading to wrong values of LIBTHREAD and LTLIBTHREAD. + THREADLIB_CPPFLAGS="$THREADLIB_CPPFLAGS -D_REENTRANT" + ;; + esac + # Some systems optimize for single-threaded programs by default, and + # need special flags to disable these optimizations. For example, the + # definition of 'errno' in . + case "$host_os" in + aix* | freebsd*) + THREADLIB_CPPFLAGS="$THREADLIB_CPPFLAGS -D_THREAD_SAFE" + ;; + solaris*) + THREADLIB_CPPFLAGS="$THREADLIB_CPPFLAGS -D_REENTRANT" + ;; + esac + fi + if test x"$THREADLIB_CPPFLAGS" != x ; then + CPPFLAGS="$CPPFLAGS $THREADLIB_CPPFLAGS" + fi + + + + +fi + +# We build libgpg-error with large file support so that we have a 64 +# bit off_t. Our external interface uses the gpgrt_off_t which is +# anyway specified as 64 bit. Thus the same libgpg-error can be used +# by software which is not build with large file support. +# Check whether --enable-largefile was given. +if test "${enable_largefile+set}" = set; then : + enableval=$enable_largefile; +fi + +if test "$enable_largefile" != no; then + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5 +$as_echo_n "checking for special C compiler options needed for large files... " >&6; } +if ${ac_cv_sys_largefile_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_sys_largefile_CC=no + if test "$GCC" != yes; then + ac_save_CC=$CC + while :; do + # IRIX 6.2 and later do not support large files by default, + # so use the C compiler's -n32 option if that helps. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF + if ac_fn_c_try_compile "$LINENO"; then : + break +fi +rm -f core conftest.err conftest.$ac_objext + CC="$CC -n32" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_largefile_CC=' -n32'; break +fi +rm -f core conftest.err conftest.$ac_objext + break + done + CC=$ac_save_CC + rm -f conftest.$ac_ext + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5 +$as_echo "$ac_cv_sys_largefile_CC" >&6; } + if test "$ac_cv_sys_largefile_CC" != no; then + CC=$CC$ac_cv_sys_largefile_CC + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5 +$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; } +if ${ac_cv_sys_file_offset_bits+:} false; then : + $as_echo_n "(cached) " >&6 +else + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_file_offset_bits=no; break +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#define _FILE_OFFSET_BITS 64 +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_file_offset_bits=64; break +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_sys_file_offset_bits=unknown + break +done +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5 +$as_echo "$ac_cv_sys_file_offset_bits" >&6; } +case $ac_cv_sys_file_offset_bits in #( + no | unknown) ;; + *) +cat >>confdefs.h <<_ACEOF +#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits +_ACEOF +;; +esac +rm -rf conftest* + if test $ac_cv_sys_file_offset_bits = unknown; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5 +$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; } +if ${ac_cv_sys_large_files+:} false; then : + $as_echo_n "(cached) " >&6 +else + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_large_files=no; break +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#define _LARGE_FILES 1 +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_large_files=1; break +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_sys_large_files=unknown + break +done +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5 +$as_echo "$ac_cv_sys_large_files" >&6; } +case $ac_cv_sys_large_files in #( + no | unknown) ;; + *) +cat >>confdefs.h <<_ACEOF +#define _LARGE_FILES $ac_cv_sys_large_files +_ACEOF +;; +esac +rm -rf conftest* + fi + + +fi + + + + +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.4.2' +macro_revision='1.3337' + + + + + + + + + + + + + +ltmain="$ac_aux_dir/ltmain.sh" + +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case "$ECHO" in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_FGREP" || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 +$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 +$as_echo "$xsi_shell" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 +$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 +$as_echo "$lt_shell_append" >&6; } + + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +$as_echo_n "checking how to convert $build file names to $host format... " >&6; } +if ${lt_cv_to_host_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac + +fi + +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +$as_echo "$lt_cv_to_host_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } +if ${lt_cv_to_tool_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac + +fi + +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +$as_echo "$lt_cv_to_tool_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test "$GCC" != yes; then + reload_cmds=false + fi + ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if ${lt_cv_deplibs_check_method+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. + if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +$as_echo_n "checking how to associate runtime and link libraries... " >&6; } +if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + + + + + + + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} +: ${AR_FLAGS=cru} + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +$as_echo_n "checking for archiver @FILE support... " >&6; } +if ${lt_cv_ar_at_file+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +$as_echo "$lt_cv_ar_at_file" >&6; } + +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if ${lt_cv_sys_global_symbol_pipe+:} false; then : + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +$as_echo_n "checking for sysroot... " >&6; } + +# Check whether --with-sysroot was given. +if test "${with_sysroot+set}" = set; then : + withval=$with_sysroot; +else + with_sysroot=no +fi + + +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 +$as_echo "${with_sysroot}" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +$as_echo "${lt_sysroot:-no}" >&6; } + + + + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + powerpc64le-*) + LD="${LD-ld} -m elf32lppclinux" + ;; + powerpc64-*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + powerpcle-*) + LD="${LD-ld} -m elf64lppc" + ;; + powerpc-*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +$as_echo "$MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + fi +else + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" +fi + +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if ${lt_cv_path_mainfest_tool+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +$as_echo "$lt_cv_path_mainfest_tool" >&6; } +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi + + + + + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if ${lt_cv_apple_cc_single_mod+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if ${lt_cv_ld_exported_symbols_list+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes +else + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if ${lt_cv_ld_force_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi + +done + + + + + +# Set options +enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AS="${ac_tool_prefix}as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AS=$ac_cv_prog_AS +if test -n "$AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 +$as_echo "$AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. +set dummy as; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AS+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AS"; then + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AS="as" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AS=$ac_cv_prog_ac_ct_AS +if test -n "$ac_ct_AS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 +$as_echo "$ac_ct_AS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AS" = x; then + AS="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi +else + AS="$ac_cv_prog_AS" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + + ;; +esac + +test -z "$AS" && AS=as + + + + + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + +# Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=no +fi + + + + + + + + + + + enable_dlopen=no + + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + pic_mode=default +fi + + +test -z "$pic_mode" && pic_mode=default + + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +$as_echo "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if ${lt_cv_prog_compiler_pic_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + linux* | k*bsd*-gnu | gnu*) + link_all_deplibs=no + ;; + esac + + ld_shlibs=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='${wl}--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED \"$sed_uncomment_deffile\" $export_symbols | $SED 1q`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + link_all_deplibs=no + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + export_dynamic_flag_spec='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + archive_expsym_cmds='if test "x`$SED \"$sed_uncomment_deffile\" $export_symbols | $SED 1q`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if ${lt_cv_prog_compiler__b+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } + +if test x"$lt_cv_prog_compiler__b" = xyes; then + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi + + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : + $as_echo_n "(cached) " >&6 +else + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test "$lt_cv_irix_exported_symbol" = yes; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; + esac + fi + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([A-Za-z]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + hardcode_libdir_flag_spec='-L$libdir' + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if ${ac_cv_lib_svld_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if ${ac_cv_lib_dld_dld_link+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self_static+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report which library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args. +set dummy ${ac_tool_prefix}windres; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RC"; then + ac_cv_prog_RC="$RC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RC="${ac_tool_prefix}windres" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RC=$ac_cv_prog_RC +if test -n "$RC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RC" >&5 +$as_echo "$RC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RC"; then + ac_ct_RC=$RC + # Extract the first word of "windres", so it can be a program name with args. +set dummy windres; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RC"; then + ac_cv_prog_ac_ct_RC="$ac_ct_RC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RC="windres" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RC=$ac_cv_prog_ac_ct_RC +if test -n "$ac_ct_RC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RC" >&5 +$as_echo "$ac_ct_RC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RC" = x; then + RC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RC=$ac_ct_RC + fi +else + RC="$ac_cv_prog_RC" +fi + + + + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +objext_RC=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +CFLAGS= +compiler=$CC +compiler_RC=$CC +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` + +lt_cv_prog_compiler_c_o_RC=yes + +if test -n "$compiler"; then + : + + + +fi + +GCC=$lt_save_GCC +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS + + + +# We need to compile and run a program on the build machine. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for cc for build" >&5 +$as_echo_n "checking for cc for build... " >&6; } +if test "$cross_compiling" = "yes"; then + CC_FOR_BUILD="${CC_FOR_BUILD-cc}" +else + CC_FOR_BUILD="${CC_FOR_BUILD-$CC}" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC_FOR_BUILD" >&5 +$as_echo "$CC_FOR_BUILD" >&6; } + + +# Extract the first word of "yat2m", so it can be a program name with args. +set dummy yat2m; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_YAT2M+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $YAT2M in + [\\/]* | ?:[\\/]*) + ac_cv_path_YAT2M="$YAT2M" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_YAT2M="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +YAT2M=$ac_cv_path_YAT2M +if test -n "$YAT2M"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $YAT2M" >&5 +$as_echo "$YAT2M" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + if test -n "$ac_cv_path_YAT2M"; then + HAVE_YAT2M_TRUE= + HAVE_YAT2M_FALSE='#' +else + HAVE_YAT2M_TRUE='#' + HAVE_YAT2M_FALSE= +fi + + + + + +# Note, that autogen.sh greps for the next line. + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 +$as_echo_n "checking whether NLS is requested... " >&6; } + # Check whether --enable-nls was given. +if test "${enable_nls+set}" = set; then : + enableval=$enable_nls; USE_NLS=$enableval +else + USE_NLS=yes +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 +$as_echo "$USE_NLS" >&6; } + + + + + GETTEXT_MACRO_VERSION=0.19 + + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_MSGFMT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case "$MSGFMT" in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && + (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" + ;; +esac +fi +MSGFMT="$ac_cv_path_MSGFMT" +if test "$MSGFMT" != ":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 +$as_echo "$MSGFMT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + # Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_GMSGFMT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $GMSGFMT in + [\\/]* | ?:[\\/]*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; +esac +fi +GMSGFMT=$ac_cv_path_GMSGFMT +if test -n "$GMSGFMT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 +$as_echo "$GMSGFMT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; + *) MSGFMT_015=$MSGFMT ;; + esac + + case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; + *) GMSGFMT_015=$GMSGFMT ;; + esac + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_XGETTEXT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case "$XGETTEXT" in + [\\/]* | ?:[\\/]*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && + (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" + ;; +esac +fi +XGETTEXT="$ac_cv_path_XGETTEXT" +if test "$XGETTEXT" != ":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 +$as_echo "$XGETTEXT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + rm -f messages.po + + case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; + *) XGETTEXT_015=$XGETTEXT ;; + esac + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "msgmerge", so it can be a program name with args. +set dummy msgmerge; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_MSGMERGE+:} false; then : + $as_echo_n "(cached) " >&6 +else + case "$MSGMERGE" in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then + ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" + ;; +esac +fi +MSGMERGE="$ac_cv_path_MSGMERGE" +if test "$MSGMERGE" != ":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 +$as_echo "$MSGMERGE" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$localedir" || localedir='${datadir}/locale' + + + test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= + + + ac_config_commands="$ac_config_commands po-directories" + + + + if test "X$prefix" = "XNONE"; then + acl_final_prefix="$ac_default_prefix" + else + acl_final_prefix="$prefix" + fi + if test "X$exec_prefix" = "XNONE"; then + acl_final_exec_prefix='${prefix}' + else + acl_final_exec_prefix="$exec_prefix" + fi + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" + prefix="$acl_save_prefix" + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'` + while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${acl_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$acl_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + acl_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$acl_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${acl_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$acl_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$acl_cv_prog_gnu_ld + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5 +$as_echo_n "checking for shared library run path origin... " >&6; } +if ${acl_cv_rpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + + CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ + ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh + . ./conftest.sh + rm -f ./conftest.sh + acl_cv_rpath=done + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5 +$as_echo "$acl_cv_rpath" >&6; } + wl="$acl_cv_wl" + acl_libext="$acl_cv_libext" + acl_shlibext="$acl_cv_shlibext" + acl_libname_spec="$acl_cv_libname_spec" + acl_library_names_spec="$acl_cv_library_names_spec" + acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + acl_hardcode_direct="$acl_cv_hardcode_direct" + acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" + # Check whether --enable-rpath was given. +if test "${enable_rpath+set}" = set; then : + enableval=$enable_rpath; : +else + enable_rpath=yes +fi + + + + + acl_libdirstem=lib + acl_libdirstem2= + case "$host_os" in + solaris*) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5 +$as_echo_n "checking for 64-bit host... " >&6; } +if ${gl_cv_solaris_64bit+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef _LP64 +sixtyfour bits +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "sixtyfour bits" >/dev/null 2>&1; then : + gl_cv_solaris_64bit=yes +else + gl_cv_solaris_64bit=no +fi +rm -f conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5 +$as_echo "$gl_cv_solaris_64bit" >&6; } + if test $gl_cv_solaris_64bit = yes; then + acl_libdirstem=lib/64 + case "$host_cpu" in + sparc*) acl_libdirstem2=lib/sparcv9 ;; + i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; + esac + fi + ;; + *) + searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` + if test -n "$searchpath"; then + acl_save_IFS="${IFS= }"; IFS=":" + for searchdir in $searchpath; do + if test -d "$searchdir"; then + case "$searchdir" in + */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; + */../ | */.. ) + # Better ignore directories of this form. They are misleading. + ;; + *) searchdir=`cd "$searchdir" && pwd` + case "$searchdir" in + */lib64 ) acl_libdirstem=lib64 ;; + esac ;; + esac + fi + done + IFS="$acl_save_IFS" + fi + ;; + esac + test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" + + + + + + + + + + + + + use_additional=yes + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + +# Check whether --with-libiconv-prefix was given. +if test "${with_libiconv_prefix+set}" = set; then : + withval=$with_libiconv_prefix; + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + if test "$acl_libdirstem2" != "$acl_libdirstem" \ + && ! test -d "$withval/$acl_libdirstem"; then + additional_libdir="$withval/$acl_libdirstem2" + fi + fi + fi + +fi + + LIBICONV= + LTLIBICONV= + INCICONV= + LIBICONV_PREFIX= + HAVE_LIBICONV= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='iconv ' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" + else + : + fi + else + found_dir= + found_la= + found_so= + found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi + if test $use_additional = yes; then + dir="$additional_libdir" + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + if test "$acl_hardcode_direct" = yes; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + haveit= + for x in $LDFLAGS $LIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" + fi + if test "$acl_hardcode_minus_L" != no; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" + fi + fi + additional_includedir= + case "$found_dir" in + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = 'iconv'; then + LIBICONV_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = 'iconv'; then + LIBICONV_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INCICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + if test -n "$found_la"; then + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" + ;; + esac + done + fi + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$acl_hardcode_libdir_separator"; then + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" + else + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + for found_dir in $ltrpathdirs; do + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" + done + fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5 +$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; } +if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then : + $as_echo_n "(cached) " >&6 +else + gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +CFPreferencesCopyAppValue(NULL, NULL) + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + gt_cv_func_CFPreferencesCopyAppValue=yes +else + gt_cv_func_CFPreferencesCopyAppValue=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$gt_save_LIBS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 +$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; } + if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then + +$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h + + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5 +$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; } +if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then : + $as_echo_n "(cached) " >&6 +else + gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +CFLocaleCopyCurrent(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + gt_cv_func_CFLocaleCopyCurrent=yes +else + gt_cv_func_CFLocaleCopyCurrent=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$gt_save_LIBS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5 +$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; } + if test $gt_cv_func_CFLocaleCopyCurrent = yes; then + +$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h + + fi + INTL_MACOSX_LIBS= + if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then + INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" + fi + + + + + + + LIBINTL= + LTLIBINTL= + POSUB= + + case " $gt_needs " in + *" need-formatstring-macros "*) gt_api_version=3 ;; + *" need-ngettext "*) gt_api_version=2 ;; + *) gt_api_version=1 ;; + esac + gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" + gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" + + if test "$USE_NLS" = "yes"; then + gt_use_preinstalled_gnugettext=no + + + if test $gt_api_version -ge 3; then + gt_revision_test_code=' +#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +' + else + gt_revision_test_code= + fi + if test $gt_api_version -ge 2; then + gt_expression_test_code=' + * ngettext ("", "", 0)' + else + gt_expression_test_code= + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5 +$as_echo_n "checking for GNU gettext in libc... " >&6; } +if eval \${$gt_func_gnugettext_libc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern int *_nl_domain_bindings; + +int +main () +{ + +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$gt_func_gnugettext_libc=yes" +else + eval "$gt_func_gnugettext_libc=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$gt_func_gnugettext_libc + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + + if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then + + + + + + am_save_CPPFLAGS="$CPPFLAGS" + + for element in $INCICONV; do + haveit= + for x in $CPPFLAGS; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" + fi + done + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5 +$as_echo_n "checking for iconv... " >&6; } +if ${am_cv_func_iconv+:} false; then : + $as_echo_n "(cached) " >&6 +else + + am_cv_func_iconv="no, consider installing GNU libiconv" + am_cv_lib_iconv=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main () +{ +iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + am_cv_func_iconv=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test "$am_cv_func_iconv" != yes; then + am_save_LIBS="$LIBS" + LIBS="$LIBS $LIBICONV" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main () +{ +iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + am_cv_lib_iconv=yes + am_cv_func_iconv=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$am_save_LIBS" + fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5 +$as_echo "$am_cv_func_iconv" >&6; } + if test "$am_cv_func_iconv" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5 +$as_echo_n "checking for working iconv... " >&6; } +if ${am_cv_func_iconv_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + + am_save_LIBS="$LIBS" + if test $am_cv_lib_iconv = yes; then + LIBS="$LIBS $LIBICONV" + fi + if test "$cross_compiling" = yes; then : + + case "$host_os" in + aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; + *) am_cv_func_iconv_works="guessing yes" ;; + esac + +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include +int main () +{ + int result = 0; + /* Test against AIX 5.1 bug: Failures are not distinguishable from successful + returns. */ + { + iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); + if (cd_utf8_to_88591 != (iconv_t)(-1)) + { + static const char input[] = "\342\202\254"; /* EURO SIGN */ + char buf[10]; + const char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_utf8_to_88591, + (char **) &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + result |= 1; + iconv_close (cd_utf8_to_88591); + } + } + /* Test against Solaris 10 bug: Failures are not distinguishable from + successful returns. */ + { + iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); + if (cd_ascii_to_88591 != (iconv_t)(-1)) + { + static const char input[] = "\263"; + char buf[10]; + const char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_ascii_to_88591, + (char **) &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + result |= 2; + iconv_close (cd_ascii_to_88591); + } + } + /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ + { + iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); + if (cd_88591_to_utf8 != (iconv_t)(-1)) + { + static const char input[] = "\304"; + static char buf[2] = { (char)0xDE, (char)0xAD }; + const char *inptr = input; + size_t inbytesleft = 1; + char *outptr = buf; + size_t outbytesleft = 1; + size_t res = iconv (cd_88591_to_utf8, + (char **) &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) + result |= 4; + iconv_close (cd_88591_to_utf8); + } + } +#if 0 /* This bug could be worked around by the caller. */ + /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ + { + iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); + if (cd_88591_to_utf8 != (iconv_t)(-1)) + { + static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; + char buf[50]; + const char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_88591_to_utf8, + (char **) &inptr, &inbytesleft, + &outptr, &outbytesleft); + if ((int)res > 0) + result |= 8; + iconv_close (cd_88591_to_utf8); + } + } +#endif + /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is + provided. */ + if (/* Try standardized names. */ + iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) + /* Try IRIX, OSF/1 names. */ + && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) + /* Try AIX names. */ + && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) + /* Try HP-UX names. */ + && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) + result |= 16; + return result; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + am_cv_func_iconv_works=yes +else + am_cv_func_iconv_works=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + LIBS="$am_save_LIBS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5 +$as_echo "$am_cv_func_iconv_works" >&6; } + case "$am_cv_func_iconv_works" in + *no) am_func_iconv=no am_cv_lib_iconv=no ;; + *) am_func_iconv=yes ;; + esac + else + am_func_iconv=no am_cv_lib_iconv=no + fi + if test "$am_func_iconv" = yes; then + +$as_echo "#define HAVE_ICONV 1" >>confdefs.h + + fi + if test "$am_cv_lib_iconv" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5 +$as_echo_n "checking how to link with libiconv... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5 +$as_echo "$LIBICONV" >&6; } + else + CPPFLAGS="$am_save_CPPFLAGS" + LIBICONV= + LTLIBICONV= + fi + + + + + + + + + + + + use_additional=yes + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + +# Check whether --with-libintl-prefix was given. +if test "${with_libintl_prefix+set}" = set; then : + withval=$with_libintl_prefix; + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + if test "$acl_libdirstem2" != "$acl_libdirstem" \ + && ! test -d "$withval/$acl_libdirstem"; then + additional_libdir="$withval/$acl_libdirstem2" + fi + fi + fi + +fi + + LIBINTL= + LTLIBINTL= + INCINTL= + LIBINTL_PREFIX= + HAVE_LIBINTL= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='intl ' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" + else + : + fi + else + found_dir= + found_la= + found_so= + found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi + if test $use_additional = yes; then + dir="$additional_libdir" + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + if test "$acl_hardcode_direct" = yes; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + haveit= + for x in $LDFLAGS $LIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" + fi + if test "$acl_hardcode_minus_L" != no; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" + fi + fi + additional_includedir= + case "$found_dir" in + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = 'intl'; then + LIBINTL_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = 'intl'; then + LIBINTL_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INCINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + if test -n "$found_la"; then + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" + ;; + esac + done + fi + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$acl_hardcode_libdir_separator"; then + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" + else + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + for found_dir in $ltrpathdirs; do + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" + done + fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5 +$as_echo_n "checking for GNU gettext in libintl... " >&6; } +if eval \${$gt_func_gnugettext_libintl+:} false; then : + $as_echo_n "(cached) " >&6 +else + gt_save_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $INCINTL" + gt_save_LIBS="$LIBS" + LIBS="$LIBS $LIBINTL" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (const char *); + +int +main () +{ + +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$gt_func_gnugettext_libintl=yes" +else + eval "$gt_func_gnugettext_libintl=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then + LIBS="$LIBS $LIBICONV" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +$gt_revision_test_code +extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (const char *); + +int +main () +{ + +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + LIBINTL="$LIBINTL $LIBICONV" + LTLIBINTL="$LTLIBINTL $LTLIBICONV" + eval "$gt_func_gnugettext_libintl=yes" + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + fi + CPPFLAGS="$gt_save_CPPFLAGS" + LIBS="$gt_save_LIBS" +fi +eval ac_res=\$$gt_func_gnugettext_libintl + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + fi + + if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ + || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ + && test "$PACKAGE" != gettext-runtime \ + && test "$PACKAGE" != gettext-tools; }; then + gt_use_preinstalled_gnugettext=yes + else + LIBINTL= + LTLIBINTL= + INCINTL= + fi + + + + if test -n "$INTL_MACOSX_LIBS"; then + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" + LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" + fi + fi + + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + +$as_echo "#define ENABLE_NLS 1" >>confdefs.h + + else + USE_NLS=no + fi + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5 +$as_echo_n "checking whether to use NLS... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 +$as_echo "$USE_NLS" >&6; } + if test "$USE_NLS" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5 +$as_echo_n "checking where the gettext function comes from... " >&6; } + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then + gt_source="external libintl" + else + gt_source="libc" + fi + else + gt_source="included intl directory" + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5 +$as_echo "$gt_source" >&6; } + fi + + if test "$USE_NLS" = "yes"; then + + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5 +$as_echo_n "checking how to link with libintl... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5 +$as_echo "$LIBINTL" >&6; } + + for element in $INCINTL; do + haveit= + for x in $CPPFLAGS; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" + fi + done + + fi + + +$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h + + +$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h + + fi + + POSUB=po + fi + + + + INTLLIBS="$LIBINTL" + + + + + + + +# Checks for header files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +for ac_header in stdlib.h locale.h stdint.h sys/select.h sys/time.h \ + signal.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +ac_fn_c_check_decl "$LINENO" "strerror_r" "ac_cv_have_decl_strerror_r" "$ac_includes_default" +if test "x$ac_cv_have_decl_strerror_r" = xyes; then : + ac_have_decl=1 +else + ac_have_decl=0 +fi + +cat >>confdefs.h <<_ACEOF +#define HAVE_DECL_STRERROR_R $ac_have_decl +_ACEOF + +for ac_func in strerror_r +do : + ac_fn_c_check_func "$LINENO" "strerror_r" "ac_cv_func_strerror_r" +if test "x$ac_cv_func_strerror_r" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_STRERROR_R 1 +_ACEOF + +fi +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether strerror_r returns char *" >&5 +$as_echo_n "checking whether strerror_r returns char *... " >&6; } +if ${ac_cv_func_strerror_r_char_p+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ac_cv_func_strerror_r_char_p=no + if test $ac_cv_have_decl_strerror_r = yes; then + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ + + char buf[100]; + char x = *strerror_r (0, buf, sizeof buf); + char *p = strerror_r (0, buf, sizeof buf); + return !p || x; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_func_strerror_r_char_p=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + else + # strerror_r is not declared. Choose between + # systems that have relatively inaccessible declarations for the + # function. BeOS and DEC UNIX 4.0 fall in this category, but the + # former has a strerror_r that returns char*, while the latter + # has a strerror_r that returns `int'. + # This test should segfault on the DEC system. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default + extern char *strerror_r (); +int +main () +{ +char buf[100]; + char x = *strerror_r (0, buf, sizeof buf); + return ! isalpha (x); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_strerror_r_char_p=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strerror_r_char_p" >&5 +$as_echo "$ac_cv_func_strerror_r_char_p" >&6; } +if test $ac_cv_func_strerror_r_char_p = yes; then + +$as_echo "#define STRERROR_R_CHAR_P 1" >>confdefs.h + +fi + +case "${host_os}" in + solaris*) + # All versions of Solaris from 2.4 have a thread-safe strerror(). + # Since Solaris 10, in addition strerror_r() exists. + ;; + *) + ac_fn_c_check_func "$LINENO" "strerror_r" "ac_cv_func_strerror_r" +if test "x$ac_cv_func_strerror_r" = xyes; then : + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Without strerror_r, gpg_strerror_r might not be thread-safe" >&5 +$as_echo "$as_me: WARNING: Without strerror_r, gpg_strerror_r might not be thread-safe" >&2;} +fi + + ;; +esac + +ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default" +if test "x$ac_cv_type_pid_t" = xyes; then : + +else + +cat >>confdefs.h <<_ACEOF +#define pid_t int +_ACEOF + +fi + +for ac_header in vfork.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "vfork.h" "ac_cv_header_vfork_h" "$ac_includes_default" +if test "x$ac_cv_header_vfork_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_VFORK_H 1 +_ACEOF + +fi + +done + +for ac_func in fork vfork +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + +if test "x$ac_cv_func_fork" = xyes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5 +$as_echo_n "checking for working fork... " >&6; } +if ${ac_cv_func_fork_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_func_fork_works=cross +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ + + /* By Ruediger Kuhlmann. */ + return fork () < 0; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_fork_works=yes +else + ac_cv_func_fork_works=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_fork_works" >&5 +$as_echo "$ac_cv_func_fork_works" >&6; } + +else + ac_cv_func_fork_works=$ac_cv_func_fork +fi +if test "x$ac_cv_func_fork_works" = xcross; then + case $host in + *-*-amigaos* | *-*-msdosdjgpp*) + # Override, as these systems have only a dummy fork() stub + ac_cv_func_fork_works=no + ;; + *) + ac_cv_func_fork_works=yes + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 +$as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} +fi +ac_cv_func_vfork_works=$ac_cv_func_vfork +if test "x$ac_cv_func_vfork" = xyes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5 +$as_echo_n "checking for working vfork... " >&6; } +if ${ac_cv_func_vfork_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_func_vfork_works=cross +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Thanks to Paul Eggert for this test. */ +$ac_includes_default +#include +#ifdef HAVE_VFORK_H +# include +#endif +/* On some sparc systems, changes by the child to local and incoming + argument registers are propagated back to the parent. The compiler + is told about this with #include , but some compilers + (e.g. gcc -O) don't grok . Test for this by using a + static variable whose address is put into a register that is + clobbered by the vfork. */ +static void +#ifdef __cplusplus +sparc_address_test (int arg) +# else +sparc_address_test (arg) int arg; +#endif +{ + static pid_t child; + if (!child) { + child = vfork (); + if (child < 0) { + perror ("vfork"); + _exit(2); + } + if (!child) { + arg = getpid(); + write(-1, "", 0); + _exit (arg); + } + } +} + +int +main () +{ + pid_t parent = getpid (); + pid_t child; + + sparc_address_test (0); + + child = vfork (); + + if (child == 0) { + /* Here is another test for sparc vfork register problems. This + test uses lots of local variables, at least as many local + variables as main has allocated so far including compiler + temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris + 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should + reuse the register of parent for one of the local variables, + since it will think that parent can't possibly be used any more + in this routine. Assigning to the local variable will thus + munge parent in the parent process. */ + pid_t + p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), + p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); + /* Convince the compiler that p..p7 are live; otherwise, it might + use the same hardware register for all 8 local variables. */ + if (p != p1 || p != p2 || p != p3 || p != p4 + || p != p5 || p != p6 || p != p7) + _exit(1); + + /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent + from child file descriptors. If the child closes a descriptor + before it execs or exits, this munges the parent's descriptor + as well. Test for this by closing stdout in the child. */ + _exit(close(fileno(stdout)) != 0); + } else { + int status; + struct stat st; + + while (wait(&status) != child) + ; + return ( + /* Was there some problem with vforking? */ + child < 0 + + /* Did the child fail? (This shouldn't happen.) */ + || status + + /* Did the vfork/compiler bug occur? */ + || parent != getpid() + + /* Did the file descriptor bug occur? */ + || fstat(fileno(stdout), &st) != 0 + ); + } +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_vfork_works=yes +else + ac_cv_func_vfork_works=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vfork_works" >&5 +$as_echo "$ac_cv_func_vfork_works" >&6; } + +fi; +if test "x$ac_cv_func_fork_works" = xcross; then + ac_cv_func_vfork_works=$ac_cv_func_vfork + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 +$as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} +fi + +if test "x$ac_cv_func_vfork_works" = xyes; then + +$as_echo "#define HAVE_WORKING_VFORK 1" >>confdefs.h + +else + +$as_echo "#define vfork fork" >>confdefs.h + +fi +if test "x$ac_cv_func_fork_works" = xyes; then + +$as_echo "#define HAVE_WORKING_FORK 1" >>confdefs.h + +fi + +for ac_func in flockfile vasprintf mmap rand strlwr stpcpy setenv stat \ + getrlimit +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + + +# +# Checks for typedefs, structures, and compiler characteristics. +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 +$as_echo_n "checking for an ANSI C-conforming const... " >&6; } +if ${ac_cv_c_const+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + +#ifndef __cplusplus + /* Ultrix mips cc rejects this sort of thing. */ + typedef int charset[2]; + const charset cs = { 0, 0 }; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this sort of thing. */ + char tx; + char *t = &tx; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; } bx; + struct s *b = &bx; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_const=yes +else + ac_cv_c_const=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 +$as_echo "$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then + +$as_echo "#define const /**/" >>confdefs.h + +fi + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int" >&5 +$as_echo_n "checking size of int... " >&6; } +if ${ac_cv_sizeof_int+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (int))" "ac_cv_sizeof_int" "$ac_includes_default"; then : + +else + if test "$ac_cv_type_int" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (int) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_int=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int" >&5 +$as_echo "$ac_cv_sizeof_int" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_INT $ac_cv_sizeof_int +_ACEOF + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5 +$as_echo_n "checking size of long... " >&6; } +if ${ac_cv_sizeof_long+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long" "$ac_includes_default"; then : + +else + if test "$ac_cv_type_long" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (long) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_long=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5 +$as_echo "$ac_cv_sizeof_long" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_LONG $ac_cv_sizeof_long +_ACEOF + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long long" >&5 +$as_echo_n "checking size of long long... " >&6; } +if ${ac_cv_sizeof_long_long+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long long))" "ac_cv_sizeof_long_long" "$ac_includes_default"; then : + +else + if test "$ac_cv_type_long_long" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (long long) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_long_long=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long_long" >&5 +$as_echo "$ac_cv_sizeof_long_long" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long +_ACEOF + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5 +$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } +if ${ac_cv_header_time+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include + +int +main () +{ +if ((struct tm *) 0) +return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_time=yes +else + ac_cv_header_time=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5 +$as_echo "$ac_cv_header_time" >&6; } +if test $ac_cv_header_time = yes; then + +$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h + +fi + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of time_t" >&5 +$as_echo_n "checking size of time_t... " >&6; } +if ${ac_cv_sizeof_time_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (time_t))" "ac_cv_sizeof_time_t" " +#include +#if TIME_WITH_SYS_TIME +# include +# include +#else +# if HAVE_SYS_TIME_H +# include +# else +# include +# endif +#endif + +"; then : + +else + if test "$ac_cv_type_time_t" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (time_t) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_time_t=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_time_t" >&5 +$as_echo "$ac_cv_sizeof_time_t" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_TIME_T $ac_cv_sizeof_time_t +_ACEOF + + + +for ac_header in sys/stat.h unistd.h direct.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if mkdir takes one argument" >&5 +$as_echo_n "checking if mkdir takes one argument... " >&6; } +if ${gnupg_cv_mkdir_takes_one_arg+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif +#ifdef HAVE_DIRECT_H +# include +#endif +int +main () +{ +mkdir ("foo", 0); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + gnupg_cv_mkdir_takes_one_arg=no +else + gnupg_cv_mkdir_takes_one_arg=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gnupg_cv_mkdir_takes_one_arg" >&5 +$as_echo "$gnupg_cv_mkdir_takes_one_arg" >&6; } +if test $gnupg_cv_mkdir_takes_one_arg = yes ; then + +$as_echo "#define MKDIR_TAKES_ONE_ARG 1" >>confdefs.h + +fi + + + +# Find a 64 bit integer type to be used instead of off_t. We prefer +# the standard integer types over int64_t and finally try long long. +if test "$ac_cv_sizeof_int" = "8"; then + replacement_for_off_t="int" +elif test "$ac_cv_sizeof_long" = "8"; then + replacement_for_off_t="long" +elif test "$ac_cv_header_stdint_h" = yes; then + replacement_for_off_t="int64_t" +elif test "$ac_cv_sizeof_long_long" = "8"; then + replacement_for_off_t="long long" +else + as_fn_error $? " +*** +*** No 64 bit signed integer type found. Can't build this library. +***" "$LINENO" 5 +fi + +cat >>confdefs.h <<_ACEOF +#define REPLACEMENT_FOR_OFF_T "$replacement_for_off_t" +_ACEOF + + + +# +# Setup gcc specific options +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for cc features" >&5 +$as_echo "$as_me: checking for cc features" >&6;} +if test "$GCC" = yes; then + # Check whether gcc does not emit a diagnostic for unknown -Wno-* + # options. This is the case for gcc >= 4.6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if gcc ignores unknown -Wno-* options" >&5 +$as_echo_n "checking if gcc ignores unknown -Wno-* options... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 6 ) +#kickerror +#endif +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + _gcc_silent_wno=yes +else + _gcc_silent_wno=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_gcc_silent_wno" >&5 +$as_echo "$_gcc_silent_wno" >&6; } + + # Note that it is okay to use CFLAGS here because these are just + # warning options and the user should have a chance of overriding + # them. + if test "$USE_MAINTAINER_MODE" = "yes"; then + M_CFLAGS="-O3 -Wall -Wcast-align -Wshadow -Wstrict-prototypes" + M_CFLAGS="$M_CFLAGS -Wformat -Wno-format-y2k -Wformat-security" + if test x"$_gcc_silent_wno" = xyes ; then + _gcc_wopt=yes + else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if gcc supports -Wno-missing-field-initializers" >&5 +$as_echo_n "checking if gcc supports -Wno-missing-field-initializers... " >&6; } + _gcc_cflags_save=$CFLAGS + CFLAGS="-Wno-missing-field-initializers" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + _gcc_wopt=yes +else + _gcc_wopt=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_gcc_wopt" >&5 +$as_echo "$_gcc_wopt" >&6; } + CFLAGS=$_gcc_cflags_save; + fi + if test x"$_gcc_wopt" = xyes ; then + M_CFLAGS="$M_CFLAGS -W -Wno-sign-compare -Wno-missing-field-initializers" + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if gcc supports -Wdeclaration-after-statement" >&5 +$as_echo_n "checking if gcc supports -Wdeclaration-after-statement... " >&6; } + _gcc_cflags_save=$CFLAGS + CFLAGS="-Wdeclaration-after-statement" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + _gcc_wopt=yes +else + _gcc_wopt=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_gcc_wopt" >&5 +$as_echo "$_gcc_wopt" >&6; } + CFLAGS=$_gcc_cflags_save; + if test x"$_gcc_wopt" = xyes ; then + M_CFLAGS="$M_CFLAGS -Wdeclaration-after-statement" + fi + + # Prepend the maintainer-cflags so that the user can override + # them, e.g. to override the optimization flags for debugging. + CFLAGS="$M_CFLAGS $CFLAGS" + else + CFLAGS="$CFLAGS -Wall" + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if gcc supports -Wpointer-arith" >&5 +$as_echo_n "checking if gcc supports -Wpointer-arith... " >&6; } + _gcc_cflags_save=$CFLAGS + CFLAGS="-Wpointer-arith" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + _gcc_psign=yes +else + _gcc_psign=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_gcc_psign" >&5 +$as_echo "$_gcc_psign" >&6; } + CFLAGS=$_gcc_cflags_save; + if test x"$_gcc_psign" = xyes ; then + CFLAGS="$CFLAGS -Wpointer-arith" + fi + + # The undocumented option -Wno-psabi suppresses the annoying + # "the ABI of passing union with long double has changed in GCC 4.4" + # which is emitted in estream-printf.c but entirely irrelvant + # because that union is local to the file. + if test x"$_gcc_silent_wno" = xyes ; then + CFLAGS="$CFLAGS -Wno-psabi" + fi +fi + +# +# Check whether the compiler supports the GCC style aligned attribute +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the GCC style aligned attribute is supported" >&5 +$as_echo_n "checking whether the GCC style aligned attribute is supported... " >&6; } +if ${gcry_cv_gcc_attribute_aligned+:} false; then : + $as_echo_n "(cached) " >&6 +else + gcry_cv_gcc_attribute_aligned=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +struct { int a; } foo __attribute__ ((aligned (16))); +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + gcry_cv_gcc_attribute_aligned=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcry_cv_gcc_attribute_aligned" >&5 +$as_echo "$gcry_cv_gcc_attribute_aligned" >&6; } +if test "$gcry_cv_gcc_attribute_aligned" = "yes" ; then + +$as_echo "#define HAVE_GCC_ATTRIBUTE_ALIGNED 1" >>confdefs.h + +fi + +# +# Check for ELF visibility support. +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the visibility attribute is supported" >&5 +$as_echo_n "checking whether the visibility attribute is supported... " >&6; } +if ${gcry_cv_visibility_attribute+:} false; then : + $as_echo_n "(cached) " >&6 +else + gcry_cv_visibility_attribute=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo __attribute__ ((visibility ("hidden"))) = 1; + int bar __attribute__ ((visibility ("protected"))) = 1; + +_ACEOF + + if ${CC-cc} -Werror -S conftest.c -o conftest.s \ + 1>&5 2>&5 ; then + if grep '\.hidden.*foo' conftest.s >/dev/null 2>&1 ; then + if grep '\.protected.*bar' conftest.s >/dev/null 2>&1; then + gcry_cv_visibility_attribute=yes + fi + fi + fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcry_cv_visibility_attribute" >&5 +$as_echo "$gcry_cv_visibility_attribute" >&6; } +if test "$gcry_cv_visibility_attribute" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for broken visibility attribute" >&5 +$as_echo_n "checking for broken visibility attribute... " >&6; } +if ${gcry_cv_broken_visibility_attribute+:} false; then : + $as_echo_n "(cached) " >&6 +else + gcry_cv_broken_visibility_attribute=yes + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (int x); + int bar (int x) __asm__ ("foo") + __attribute__ ((visibility ("hidden"))); + int bar (int x) { return x; } + +_ACEOF + + if ${CC-cc} -Werror -S conftest.c -o conftest.s \ + 1>&5 2>&5 ; then + if grep '\.hidden[ _]foo' conftest.s >/dev/null 2>&1; + then + gcry_cv_broken_visibility_attribute=no + fi + fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcry_cv_broken_visibility_attribute" >&5 +$as_echo "$gcry_cv_broken_visibility_attribute" >&6; } +fi +if test "$gcry_cv_visibility_attribute" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for broken alias attribute" >&5 +$as_echo_n "checking for broken alias attribute... " >&6; } +if ${gcry_cv_broken_alias_attribute+:} false; then : + $as_echo_n "(cached) " >&6 +else + gcry_cv_broken_alias_attribute=yes + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +extern int foo (int x) __asm ("xyzzy"); + int bar (int x) { return x; } + extern __typeof (bar) foo __attribute ((weak, alias ("bar"))); + extern int dfoo; + extern __typeof (dfoo) dfoo __asm ("abccb"); + int dfoo = 1; + +_ACEOF + + if ${CC-cc} -Werror -S conftest.c -o conftest.s \ + 1>&5 2>&5 ; then + if grep 'xyzzy' conftest.s >/dev/null 2>&1 && \ + grep 'abccb' conftest.s >/dev/null 2>&1; then + gcry_cv_broken_alias_attribute=no + fi + fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcry_cv_broken_alias_attribute" >&5 +$as_echo "$gcry_cv_broken_alias_attribute" >&6; } +fi +if test "$gcry_cv_visibility_attribute" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if gcc supports -fvisibility=hidden" >&5 +$as_echo_n "checking if gcc supports -fvisibility=hidden... " >&6; } +if ${gcry_cv_gcc_has_f_visibility+:} false; then : + $as_echo_n "(cached) " >&6 +else + gcry_cv_gcc_has_f_visibility=no + _gcc_cflags_save=$CFLAGS + CFLAGS="-fvisibility=hidden" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + gcry_cv_gcc_has_f_visibility=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS=$_gcc_cflags_save; + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcry_cv_gcc_has_f_visibility" >&5 +$as_echo "$gcry_cv_gcc_has_f_visibility" >&6; } +fi +if test "$gcry_cv_visibility_attribute" = "yes" \ + && test "$gcry_cv_broken_visibility_attribute" != "yes" \ + && test "$gcry_cv_broken_alias_attribute" != "yes" \ + && test "$gcry_cv_gcc_has_f_visibility" = "yes" + then + +$as_echo "#define GPGRT_USE_VISIBILITY 1" >>confdefs.h + + CFLAGS="$CFLAGS -fvisibility=hidden" +fi + +# +# Check whether ld supports a version script. +# (Actually not a check but a list of systems which are known to support it.) +# +have_ld_version_script=no +case "${host}" in + *-*-linux*) + have_ld_version_script=yes + ;; + *-*-gnu*) + have_ld_version_script=yes + ;; +esac +# Check whether --enable-ld-version-script was given. +if test "${enable_ld_version_script+set}" = set; then : + enableval=$enable_ld_version_script; have_ld_version_script=$enableval +else + : +fi + + if test "$have_ld_version_script" = "yes"; then + HAVE_LD_VERSION_SCRIPT_TRUE= + HAVE_LD_VERSION_SCRIPT_FALSE='#' +else + HAVE_LD_VERSION_SCRIPT_TRUE='#' + HAVE_LD_VERSION_SCRIPT_FALSE= +fi + + + +# +# Check for thread library. +# +# Windows has always thread support; thus we don't bother to test for +# it as it may lead to false results when cross building. +if test "$have_w32_system" = yes; then + $as_echo "#define USE_WINDOWS_THREADS 1" >>confdefs.h + + LIBTHREAD= + LTLIBTHREAD= + LIBMULTITHREAD= + LTLIBMULTITHREAD= + THREADLIB_CPPFLAGS="" + + + + +else + + + gl_threads_api=none + LIBTHREAD= + LTLIBTHREAD= + LIBMULTITHREAD= + LTLIBMULTITHREAD= + if test "$gl_use_threads" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether imported symbols can be declared weak" >&5 +$as_echo_n "checking whether imported symbols can be declared weak... " >&6; } +if ${gl_cv_have_weak+:} false; then : + $as_echo_n "(cached) " >&6 +else + gl_cv_have_weak=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +extern void xyzzy (); +#pragma weak xyzzy +int +main () +{ +xyzzy(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + gl_cv_have_weak=maybe +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test $gl_cv_have_weak = maybe; then + if test "$cross_compiling" = yes; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __ELF__ + Extensible Linking Format + #endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "Extensible Linking Format" >/dev/null 2>&1; then : + gl_cv_have_weak="guessing yes" +else + gl_cv_have_weak="guessing no" +fi +rm -f conftest* + + +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#pragma weak fputs +int main () +{ + return (fputs == NULL); +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + gl_cv_have_weak=yes +else + gl_cv_have_weak=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_have_weak" >&5 +$as_echo "$gl_cv_have_weak" >&6; } + if test "$gl_use_threads" = yes || test "$gl_use_threads" = posix; then + # On OSF/1, the compiler needs the flag -pthread or -D_REENTRANT so that + # it groks . It's added above, in gl_THREADLIB_EARLY_BODY. + ac_fn_c_check_header_mongrel "$LINENO" "pthread.h" "ac_cv_header_pthread_h" "$ac_includes_default" +if test "x$ac_cv_header_pthread_h" = xyes; then : + gl_have_pthread_h=yes +else + gl_have_pthread_h=no +fi + + + if test "$gl_have_pthread_h" = yes; then + # Other possible tests: + # -lpthreads (FSU threads, PCthreads) + # -lgthreads + gl_have_pthread= + # Test whether both pthread_mutex_lock and pthread_mutexattr_init exist + # in libc. IRIX 6.5 has the first one in both libc and libpthread, but + # the second one only in libpthread, and lock.c needs it. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +pthread_mutex_lock((pthread_mutex_t*)0); + pthread_mutexattr_init((pthread_mutexattr_t*)0); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + gl_have_pthread=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + # Test for libpthread by looking for pthread_kill. (Not pthread_self, + # since it is defined as a macro on OSF/1.) + if test -n "$gl_have_pthread"; then + # The program links fine without libpthread. But it may actually + # need to link with libpthread in order to create multiple threads. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_kill in -lpthread" >&5 +$as_echo_n "checking for pthread_kill in -lpthread... " >&6; } +if ${ac_cv_lib_pthread_pthread_kill+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pthread_kill (); +int +main () +{ +return pthread_kill (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_pthread_pthread_kill=yes +else + ac_cv_lib_pthread_pthread_kill=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_kill" >&5 +$as_echo "$ac_cv_lib_pthread_pthread_kill" >&6; } +if test "x$ac_cv_lib_pthread_pthread_kill" = xyes; then : + LIBMULTITHREAD=-lpthread LTLIBMULTITHREAD=-lpthread + # On Solaris and HP-UX, most pthread functions exist also in libc. + # Therefore pthread_in_use() needs to actually try to create a + # thread: pthread_create from libc will fail, whereas + # pthread_create will actually create a thread. + case "$host_os" in + solaris* | hpux*) + +$as_echo "#define PTHREAD_IN_USE_DETECTION_HARD 1" >>confdefs.h + + esac + +fi + + else + # Some library is needed. Try libpthread and libc_r. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_kill in -lpthread" >&5 +$as_echo_n "checking for pthread_kill in -lpthread... " >&6; } +if ${ac_cv_lib_pthread_pthread_kill+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pthread_kill (); +int +main () +{ +return pthread_kill (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_pthread_pthread_kill=yes +else + ac_cv_lib_pthread_pthread_kill=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_kill" >&5 +$as_echo "$ac_cv_lib_pthread_pthread_kill" >&6; } +if test "x$ac_cv_lib_pthread_pthread_kill" = xyes; then : + gl_have_pthread=yes + LIBTHREAD=-lpthread LTLIBTHREAD=-lpthread + LIBMULTITHREAD=-lpthread LTLIBMULTITHREAD=-lpthread +fi + + if test -z "$gl_have_pthread"; then + # For FreeBSD 4. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_kill in -lc_r" >&5 +$as_echo_n "checking for pthread_kill in -lc_r... " >&6; } +if ${ac_cv_lib_c_r_pthread_kill+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lc_r $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pthread_kill (); +int +main () +{ +return pthread_kill (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_c_r_pthread_kill=yes +else + ac_cv_lib_c_r_pthread_kill=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_r_pthread_kill" >&5 +$as_echo "$ac_cv_lib_c_r_pthread_kill" >&6; } +if test "x$ac_cv_lib_c_r_pthread_kill" = xyes; then : + gl_have_pthread=yes + LIBTHREAD=-lc_r LTLIBTHREAD=-lc_r + LIBMULTITHREAD=-lc_r LTLIBMULTITHREAD=-lc_r +fi + + fi + fi + if test -n "$gl_have_pthread"; then + gl_threads_api=posix + +$as_echo "#define USE_POSIX_THREADS 1" >>confdefs.h + + if test -n "$LIBMULTITHREAD" || test -n "$LTLIBMULTITHREAD"; then + if case "$gl_cv_have_weak" in *yes) true;; *) false;; esac; then + +$as_echo "#define USE_POSIX_THREADS_WEAK 1" >>confdefs.h + + LIBTHREAD= + LTLIBTHREAD= + fi + fi + fi + fi + fi + if test -z "$gl_have_pthread"; then + if test "$gl_use_threads" = yes || test "$gl_use_threads" = solaris; then + gl_have_solaristhread= + gl_save_LIBS="$LIBS" + LIBS="$LIBS -lthread" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main () +{ +thr_self(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + gl_have_solaristhread=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$gl_save_LIBS" + if test -n "$gl_have_solaristhread"; then + gl_threads_api=solaris + LIBTHREAD=-lthread + LTLIBTHREAD=-lthread + LIBMULTITHREAD="$LIBTHREAD" + LTLIBMULTITHREAD="$LTLIBTHREAD" + +$as_echo "#define USE_SOLARIS_THREADS 1" >>confdefs.h + + if case "$gl_cv_have_weak" in *yes) true;; *) false;; esac; then + +$as_echo "#define USE_SOLARIS_THREADS_WEAK 1" >>confdefs.h + + LIBTHREAD= + LTLIBTHREAD= + fi + fi + fi + fi + if test -z "$gl_have_pthread"; then + case "$gl_use_threads" in + yes | windows | win32) # The 'win32' is for backward compatibility. + if { case "$host_os" in + mingw*) true;; + *) false;; + esac + }; then + gl_threads_api=windows + +$as_echo "#define USE_WINDOWS_THREADS 1" >>confdefs.h + + fi + ;; + esac + fi + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for multithread API to use" >&5 +$as_echo_n "checking for multithread API to use... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_threads_api" >&5 +$as_echo "$gl_threads_api" >&6; } + + + + + + + + + + + + if test "$gl_threads_api" = posix; then + # OSF/1 4.0 and Mac OS X 10.1 lack the pthread_rwlock_t type and the + # pthread_rwlock_* functions. + ac_fn_c_check_type "$LINENO" "pthread_rwlock_t" "ac_cv_type_pthread_rwlock_t" "#include +" +if test "x$ac_cv_type_pthread_rwlock_t" = xyes; then : + +$as_echo "#define HAVE_PTHREAD_RWLOCK 1" >>confdefs.h + +fi + + # glibc defines PTHREAD_MUTEX_RECURSIVE as enum, not as a macro. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #include +int +main () +{ + +#if __FreeBSD__ == 4 +error "No, in FreeBSD 4.0 recursive mutexes actually don't work." +#elif (defined __ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ \ + && __ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ < 1070) +error "No, in Mac OS X < 10.7 recursive mutexes actually don't work." +#else +int x = (int)PTHREAD_MUTEX_RECURSIVE; +return !x; +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +$as_echo "#define HAVE_PTHREAD_MUTEX_RECURSIVE 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + : + + if test "$gl_threads_api" = posix; then + # The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of pthread_mutex_t" >&5 +$as_echo_n "checking size of pthread_mutex_t... " >&6; } +if ${ac_cv_sizeof_pthread_mutex_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (pthread_mutex_t))" "ac_cv_sizeof_pthread_mutex_t" "$ac_includes_default + #include +"; then : + +else + if test "$ac_cv_type_pthread_mutex_t" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (pthread_mutex_t) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_pthread_mutex_t=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_pthread_mutex_t" >&5 +$as_echo "$ac_cv_sizeof_pthread_mutex_t" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_PTHREAD_MUTEX_T $ac_cv_sizeof_pthread_mutex_t +_ACEOF + + + fi +fi + +# Default value for GPG_ERROR_CONFIG_LIBS +config_libs="-lgpg-error" + +# +# Check for other libraries +# +LIB_SCHED_YIELD= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing sched_yield" >&5 +$as_echo_n "checking for library containing sched_yield... " >&6; } +if ${ac_cv_search_sched_yield+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char sched_yield (); +int +main () +{ +return sched_yield (); + ; + return 0; +} +_ACEOF +for ac_lib in '' rt posix4; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_sched_yield=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_sched_yield+:} false; then : + break +fi +done +if ${ac_cv_search_sched_yield+:} false; then : + +else + ac_cv_search_sched_yield=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_sched_yield" >&5 +$as_echo "$ac_cv_search_sched_yield" >&6; } +ac_res=$ac_cv_search_sched_yield +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + if test "$ac_cv_search_sched_yield" != "none required"; then + LIB_SCHED_YIELD=$ac_cv_search_sched_yield + config_libs="$config_libs $LIB_SCHED_YIELD" + fi +fi + + +LIB_NETWORK= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing inet_addr" >&5 +$as_echo_n "checking for library containing inet_addr... " >&6; } +if ${ac_cv_search_inet_addr+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char inet_addr (); +int +main () +{ +return inet_addr (); + ; + return 0; +} +_ACEOF +for ac_lib in '' nsl; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_inet_addr=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_inet_addr+:} false; then : + break +fi +done +if ${ac_cv_search_inet_addr+:} false; then : + +else + ac_cv_search_inet_addr=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_inet_addr" >&5 +$as_echo "$ac_cv_search_inet_addr" >&6; } +ac_res=$ac_cv_search_inet_addr +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + if test "$ac_cv_search_inet_addr" != "none required"; then + LIB_NETWORK=$ac_cv_search_inet_addr + fi +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing socket" >&5 +$as_echo_n "checking for library containing socket... " >&6; } +if ${ac_cv_search_socket+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char socket (); +int +main () +{ +return socket (); + ; + return 0; +} +_ACEOF +for ac_lib in '' socket; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $LIB_NETWORK $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_socket=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_socket+:} false; then : + break +fi +done +if ${ac_cv_search_socket+:} false; then : + +else + ac_cv_search_socket=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_socket" >&5 +$as_echo "$ac_cv_search_socket" >&6; } +ac_res=$ac_cv_search_socket +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + if test "$ac_cv_search_socket" != "none required"; then + LIB_NETWORK="$ac_cv_search_socket $LIB_NETWORK" + fi +fi + +if test "x$LIB_NETWORK" != x; then + config_libs="$config_libs $LIB_NETWORK" +fi + +# Check for optional readline support + + +# Check whether --with-readline was given. +if test "${with_readline+set}" = set; then : + withval=$with_readline; _do_readline=$withval +else + _do_readline=yes +fi + + + gnupg_cv_have_readline=no + if test "$_do_readline" != "no" ; then + if test -d "$withval" ; then + CPPFLAGS="${CPPFLAGS} -I$withval/include" + LDFLAGS="${LDFLAGS} -L$withval/lib" + fi + + for _termcap in "" "-ltermcap" "-lcurses" "-lncurses" ; do + _readline_save_libs=$LIBS + _combo="-lreadline${_termcap:+ $_termcap}" + LIBS="$LIBS $_combo" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether readline via \"$_combo\" is present and sane" >&5 +$as_echo_n "checking whether readline via \"$_combo\" is present and sane... " >&6; } + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include +#include + +int +main () +{ + +rl_completion_func_t *completer; +add_history("foobar"); +rl_catch_signals=0; +rl_inhibit_completion=0; +rl_attempted_completion_function=NULL; +rl_completion_matches(NULL,NULL); + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + _found_readline=yes +else + _found_readline=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_found_readline" >&5 +$as_echo "$_found_readline" >&6; } + + LIBS=$_readline_save_libs + + if test $_found_readline = yes ; then + +$as_echo "#define HAVE_LIBREADLINE 1" >>confdefs.h + + LIBREADLINE=$_combo + + gnupg_cv_have_readline=yes + break + fi + done + + unset _termcap + unset _readline_save_libs + unset _combo + unset _found_readline + fi + + + +# +# Prepare building of estream +# + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for unsigned long long int" >&5 +$as_echo_n "checking for unsigned long long int... " >&6; } +if ${ac_cv_type_unsigned_long_long_int+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_type_unsigned_long_long_int=yes + if test "x${ac_cv_prog_cc_c99-no}" = xno; then + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + /* For now, do not test the preprocessor; as of 2007 there are too many + implementations with broken preprocessors. Perhaps this can + be revisited in 2012. In the meantime, code should not expect + #if to work with literals wider than 32 bits. */ + /* Test literals. */ + long long int ll = 9223372036854775807ll; + long long int nll = -9223372036854775807LL; + unsigned long long int ull = 18446744073709551615ULL; + /* Test constant expressions. */ + typedef int a[((-9223372036854775807LL < 0 && 0 < 9223372036854775807ll) + ? 1 : -1)]; + typedef int b[(18446744073709551615ULL <= (unsigned long long int) -1 + ? 1 : -1)]; + int i = 63; +int +main () +{ +/* Test availability of runtime routines for shift and division. */ + long long int llmax = 9223372036854775807ll; + unsigned long long int ullmax = 18446744073709551615ull; + return ((ll << 63) | (ll >> 63) | (ll < i) | (ll > i) + | (llmax / ll) | (llmax % ll) + | (ull << 63) | (ull >> 63) | (ull << i) | (ull >> i) + | (ullmax / ull) | (ullmax % ull)); + ; + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +else + ac_cv_type_unsigned_long_long_int=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_unsigned_long_long_int" >&5 +$as_echo "$ac_cv_type_unsigned_long_long_int" >&6; } + if test $ac_cv_type_unsigned_long_long_int = yes; then + +$as_echo "#define HAVE_UNSIGNED_LONG_LONG_INT 1" >>confdefs.h + + fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking system features for estream-printf" >&5 +$as_echo "$as_me: checking system features for estream-printf" >&6;} + for ac_header in stdint.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "stdint.h" "ac_cv_header_stdint_h" "$ac_includes_default" +if test "x$ac_cv_header_stdint_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_STDINT_H 1 +_ACEOF + +fi + +done + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for long long int" >&5 +$as_echo_n "checking for long long int... " >&6; } +if ${ac_cv_type_long_long_int+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_type_long_long_int=yes + if test "x${ac_cv_prog_cc_c99-no}" = xno; then + ac_cv_type_long_long_int=$ac_cv_type_unsigned_long_long_int + if test $ac_cv_type_long_long_int = yes; then + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + #ifndef LLONG_MAX + # define HALF \ + (1LL << (sizeof (long long int) * CHAR_BIT - 2)) + # define LLONG_MAX (HALF - 1 + HALF) + #endif +int +main () +{ +long long int n = 1; + int i; + for (i = 0; ; i++) + { + long long int m = n << i; + if (m >> i != n) + return 1; + if (LLONG_MAX / 2 < m) + break; + } + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_type_long_long_int=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_long_long_int" >&5 +$as_echo "$ac_cv_type_long_long_int" >&6; } + if test $ac_cv_type_long_long_int = yes; then + +$as_echo "#define HAVE_LONG_LONG_INT 1" >>confdefs.h + + fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for long double" >&5 +$as_echo_n "checking for long double... " >&6; } +if ${ac_cv_type_long_double+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$GCC" = yes; then + ac_cv_type_long_double=yes + else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* The Stardent Vistra knows sizeof (long double), but does + not support it. */ + long double foo = 0.0L; +int +main () +{ +static int test_array [1 - 2 * !(/* On Ultrix 4.3 cc, long double is 4 and double is 8. */ + sizeof (double) <= sizeof (long double))]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_type_long_double=yes +else + ac_cv_type_long_double=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_long_double" >&5 +$as_echo "$ac_cv_type_long_double" >&6; } + if test $ac_cv_type_long_double = yes; then + +$as_echo "#define HAVE_LONG_DOUBLE 1" >>confdefs.h + + fi + + + + ac_fn_c_check_type "$LINENO" "intmax_t" "ac_cv_type_intmax_t" "$ac_includes_default" +if test "x$ac_cv_type_intmax_t" = xyes; then : + +$as_echo "#define HAVE_INTMAX_T 1" >>confdefs.h + +else + test $ac_cv_type_long_long_int = yes \ + && ac_type='long long int' \ + || ac_type='long int' + +cat >>confdefs.h <<_ACEOF +#define intmax_t $ac_type +_ACEOF + +fi + + + + + ac_fn_c_check_type "$LINENO" "uintmax_t" "ac_cv_type_uintmax_t" "$ac_includes_default" +if test "x$ac_cv_type_uintmax_t" = xyes; then : + +$as_echo "#define HAVE_UINTMAX_T 1" >>confdefs.h + +else + test $ac_cv_type_unsigned_long_long_int = yes \ + && ac_type='unsigned long long int' \ + || ac_type='unsigned long int' + +cat >>confdefs.h <<_ACEOF +#define uintmax_t $ac_type +_ACEOF + +fi + + + ac_fn_c_check_type "$LINENO" "ptrdiff_t" "ac_cv_type_ptrdiff_t" "$ac_includes_default" +if test "x$ac_cv_type_ptrdiff_t" = xyes; then : + +cat >>confdefs.h <<_ACEOF +#define HAVE_PTRDIFF_T 1 +_ACEOF + + +fi + + # The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of unsigned long" >&5 +$as_echo_n "checking size of unsigned long... " >&6; } +if ${ac_cv_sizeof_unsigned_long+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (unsigned long))" "ac_cv_sizeof_unsigned_long" "$ac_includes_default"; then : + +else + if test "$ac_cv_type_unsigned_long" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (unsigned long) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_unsigned_long=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_unsigned_long" >&5 +$as_echo "$ac_cv_sizeof_unsigned_long" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_UNSIGNED_LONG $ac_cv_sizeof_unsigned_long +_ACEOF + + + # The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of void *" >&5 +$as_echo_n "checking size of void *... " >&6; } +if ${ac_cv_sizeof_void_p+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (void *))" "ac_cv_sizeof_void_p" "$ac_includes_default"; then : + +else + if test "$ac_cv_type_void_p" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (void *) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_void_p=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_void_p" >&5 +$as_echo "$ac_cv_sizeof_void_p" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_VOID_P $ac_cv_sizeof_void_p +_ACEOF + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for nl_langinfo and THOUSANDS_SEP" >&5 +$as_echo_n "checking for nl_langinfo and THOUSANDS_SEP... " >&6; } +if ${estream_cv_langinfo_thousands_sep+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +char* cs = nl_langinfo(THOUSANDS_SEP); return !cs; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + estream_cv_langinfo_thousands_sep=yes +else + estream_cv_langinfo_thousands_sep=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $estream_cv_langinfo_thousands_sep" >&5 +$as_echo "$estream_cv_langinfo_thousands_sep" >&6; } + if test $estream_cv_langinfo_thousands_sep = yes; then + +$as_echo "#define HAVE_LANGINFO_THOUSANDS_SEP 1" >>confdefs.h + + fi + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking system features for estream" >&5 +$as_echo "$as_me: checking system features for estream" >&6;} + for ac_func in memrchr +do : + ac_fn_c_check_func "$LINENO" "memrchr" "ac_cv_func_memrchr" +if test "x$ac_cv_func_memrchr" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_MEMRCHR 1 +_ACEOF + +fi +done + + + +# +# Substitution used for gpg-error-config +# +GPG_ERROR_CONFIG_LIBS="$config_libs" +if test "x$LIBTHREAD" != x; then + GPG_ERROR_CONFIG_LIBS="${GPG_ERROR_CONFIG_LIBS} ${LIBTHREAD}" +fi +if test "x$LIBMULTITHREAD" != x; then + GPG_ERROR_CONFIG_MT_LIBS="${LIBMULTITHREAD}" +else + GPG_ERROR_CONFIG_MT_LIBS="" +fi +GPG_ERROR_CONFIG_CFLAGS="" +if test "x$THREADLIB_CPPFLAGS" != x; then + GPG_ERROR_CONFIG_MT_CFLAGS="${THREADLIB_CPPFLAGS}" +else + GPG_ERROR_CONFIG_MT_CFLAGS="" +fi +GPG_ERROR_CONFIG_ISUBDIRAFTER="" +GPG_ERROR_CONFIG_HOST="$host" + + + + + + + + +# +# Special defines for certain platforms +# +force_use_syscfg=no +if test "$have_w32_system" = yes; then + +$as_echo "#define HAVE_W32_SYSTEM 1" >>confdefs.h + + if test "$have_w64_system" = yes; then + +$as_echo "#define HAVE_W64_SYSTEM 1" >>confdefs.h + + fi + if test "$have_w32ce_system" = yes; then + +$as_echo "#define HAVE_W32CE_SYSTEM 1" >>confdefs.h + + GPG_ERROR_CONFIG_ISUBDIRAFTER="gpg-extra" + fi + force_use_syscfg=yes +fi +if test x$cross_compiling = xyes; then + force_use_syscfg=yes +fi + + if test "$have_w32_system" = yes; then + HAVE_W32_SYSTEM_TRUE= + HAVE_W32_SYSTEM_FALSE='#' +else + HAVE_W32_SYSTEM_TRUE='#' + HAVE_W32_SYSTEM_FALSE= +fi + + if test "$have_w64_system" = yes; then + HAVE_W64_SYSTEM_TRUE= + HAVE_W64_SYSTEM_FALSE='#' +else + HAVE_W64_SYSTEM_TRUE='#' + HAVE_W64_SYSTEM_FALSE= +fi + + if test "$have_w32ce_system" = yes; then + HAVE_W32CE_SYSTEM_TRUE= + HAVE_W32CE_SYSTEM_FALSE='#' +else + HAVE_W32CE_SYSTEM_TRUE='#' + HAVE_W32CE_SYSTEM_FALSE= +fi + + if test x$cross_compiling = xyes; then + CROSS_COMPILING_TRUE= + CROSS_COMPILING_FALSE='#' +else + CROSS_COMPILING_TRUE='#' + CROSS_COMPILING_FALSE= +fi + + if test x$force_use_syscfg = xyes; then + FORCE_USE_SYSCFG_TRUE= + FORCE_USE_SYSCFG_FALSE='#' +else + FORCE_USE_SYSCFG_TRUE='#' + FORCE_USE_SYSCFG_FALSE= +fi + + + +cat >>confdefs.h <<_ACEOF +#define HOST_TRIPLET_STRING "$host" +_ACEOF + + + +# +# gpgrt_log_clock may require linking with extra libaries. As long as +# we don't have a good test for this we require the use of this +# configure option to enabling printing of a timestamp. +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable log_clock" >&5 +$as_echo_n "checking whether to enable log_clock... " >&6; } +# Check whether --enable-log_clock was given. +if test "${enable_log_clock+set}" = set; then : + enableval=$enable_log_clock; enable_log_clock=$enableval +else + enable_log_clock=no +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_log_clock" >&5 +$as_echo "$enable_log_clock" >&6; } +if test "$enable_log_clock" = yes ; then + +$as_echo "#define ENABLE_LOG_CLOCK 1" >>confdefs.h + +fi + +# +# For now we do not build gpgscm by default. +# Eventually we will reverse the meaning of that option. +# +build_gpgscm=no +#AC_MSG_CHECKING([whether to build gpgscm]) +#AC_ARG_ENABLE(gpgscm, +# AC_HELP_STRING([--enable-gpgscm], +# [build the gpgscm tool]), +# build_gpgscm=$enableval, build_gpgscm=no) +#AC_MSG_RESULT($build_gpgscm) + if test "x$build_gpgscm" != xno; then + BUILD_GPGSCM_TRUE= + BUILD_GPGSCM_FALSE='#' +else + BUILD_GPGSCM_TRUE='#' + BUILD_GPGSCM_FALSE= +fi + + + +# +# Add -Werror to CFLAGS. This hack can be used to avoid problems with +# misbehaving autoconf tests in case the user supplied -Werror. +# +# Check whether --enable-werror was given. +if test "${enable_werror+set}" = set; then : + enableval=$enable_werror; if test $enableval = yes ; then + CFLAGS="$CFLAGS -Werror" + fi +fi + + + +# +# Provide information about the build. +# +BUILD_REVISION="10a984d" + + +cat >>confdefs.h <<_ACEOF +#define BUILD_REVISION "$BUILD_REVISION" +_ACEOF + + +BUILD_VERSION=`echo "$PACKAGE_VERSION"|sed 's/\([0-9.]*\).*/\1./'` +BUILD_VERSION="${BUILD_VERSION}0.4265" +BUILD_FILEVERSION=`echo "${BUILD_VERSION}" | tr . ,` + + + +# Check whether --enable-build-timestamp was given. +if test "${enable_build_timestamp+set}" = set; then : + enableval=$enable_build_timestamp; if test "$enableval" = "yes"; then + BUILD_TIMESTAMP=`date -u +%Y-%m-%dT%H:%M+0000 2>/dev/null || date` + else + BUILD_TIMESTAMP="$enableval" + fi +else + BUILD_TIMESTAMP="" +fi + + + +cat >>confdefs.h <<_ACEOF +#define BUILD_TIMESTAMP "$BUILD_TIMESTAMP" +_ACEOF + + + + +# Check whether --enable-languages was given. +if test "${enable_languages+set}" = set; then : + enableval=$enable_languages; +fi + + if test "x$enable_languages" != xno; then + LANGUAGES_SOME_TRUE= + LANGUAGES_SOME_FALSE='#' +else + LANGUAGES_SOME_TRUE='#' + LANGUAGES_SOME_FALSE= +fi + + +build_doc=yes +# Check whether --enable-doc was given. +if test "${enable_doc+set}" = set; then : + enableval=$enable_doc; build_doc=$enableval +else + build_doc=yes +fi + + if test "x$build_doc" != xno; then + BUILD_DOC_TRUE= + BUILD_DOC_FALSE='#' +else + BUILD_DOC_TRUE='#' + BUILD_DOC_FALSE= +fi + + +build_tests=yes +# Check whether --enable-tests was given. +if test "${enable_tests+set}" = set; then : + enableval=$enable_tests; build_tests=$enableval +else + build_tests=yes +fi + + if test "x$build_tests" != xno; then + BUILD_TESTS_TRUE= + BUILD_TESTS_FALSE='#' +else + BUILD_TESTS_TRUE='#' + BUILD_TESTS_FALSE= +fi + + +# +# Substitution +# +ac_config_files="$ac_config_files Makefile" + +ac_config_files="$ac_config_files doc/Makefile po/Makefile.in m4/Makefile" + +ac_config_files="$ac_config_files src/Makefile tests/Makefile" + +ac_config_files="$ac_config_files lang/Makefile lang/cl/Makefile lang/cl/gpg-error.asd" + +ac_config_files="$ac_config_files src/versioninfo.rc src/gpg-error.w32-manifest" + +ac_config_files="$ac_config_files src/gpg-error-config" + + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_YAT2M_TRUE}" && test -z "${HAVE_YAT2M_FALSE}"; then + as_fn_error $? "conditional \"HAVE_YAT2M\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LD_VERSION_SCRIPT_TRUE}" && test -z "${HAVE_LD_VERSION_SCRIPT_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LD_VERSION_SCRIPT\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_W32_SYSTEM_TRUE}" && test -z "${HAVE_W32_SYSTEM_FALSE}"; then + as_fn_error $? "conditional \"HAVE_W32_SYSTEM\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_W64_SYSTEM_TRUE}" && test -z "${HAVE_W64_SYSTEM_FALSE}"; then + as_fn_error $? "conditional \"HAVE_W64_SYSTEM\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_W32CE_SYSTEM_TRUE}" && test -z "${HAVE_W32CE_SYSTEM_FALSE}"; then + as_fn_error $? "conditional \"HAVE_W32CE_SYSTEM\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${CROSS_COMPILING_TRUE}" && test -z "${CROSS_COMPILING_FALSE}"; then + as_fn_error $? "conditional \"CROSS_COMPILING\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${FORCE_USE_SYSCFG_TRUE}" && test -z "${FORCE_USE_SYSCFG_FALSE}"; then + as_fn_error $? "conditional \"FORCE_USE_SYSCFG\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${BUILD_GPGSCM_TRUE}" && test -z "${BUILD_GPGSCM_FALSE}"; then + as_fn_error $? "conditional \"BUILD_GPGSCM\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${LANGUAGES_SOME_TRUE}" && test -z "${LANGUAGES_SOME_FALSE}"; then + as_fn_error $? "conditional \"LANGUAGES_SOME\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${BUILD_DOC_TRUE}" && test -z "${BUILD_DOC_FALSE}"; then + as_fn_error $? "conditional \"BUILD_DOC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${BUILD_TESTS_TRUE}" && test -z "${BUILD_TESTS_FALSE}"; then + as_fn_error $? "conditional \"BUILD_TESTS\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by libgpg-error $as_me 1.31, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +libgpg-error config.status 1.31 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' +macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' +AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`' +DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' +ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' +host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' +host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' +host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' +build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' +build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' +build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' +SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' +Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' +GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' +EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' +FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' +LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' +NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' +LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' +ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' +exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' +lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' +lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' +lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' +reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' +file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' +want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' +sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' +AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' +archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' +STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' +RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' +lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' +CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' +compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' +GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' +lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' +need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' +MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' +LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' +libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' +module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' +postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' +version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' +runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' +libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' +soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' +install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' +finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' +old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' +striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' +LD_RC='`$ECHO "$LD_RC" | $SED "$delay_single_quote_subst"`' +reload_flag_RC='`$ECHO "$reload_flag_RC" | $SED "$delay_single_quote_subst"`' +reload_cmds_RC='`$ECHO "$reload_cmds_RC" | $SED "$delay_single_quote_subst"`' +old_archive_cmds_RC='`$ECHO "$old_archive_cmds_RC" | $SED "$delay_single_quote_subst"`' +compiler_RC='`$ECHO "$compiler_RC" | $SED "$delay_single_quote_subst"`' +GCC_RC='`$ECHO "$GCC_RC" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag_RC='`$ECHO "$lt_prog_compiler_no_builtin_flag_RC" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic_RC='`$ECHO "$lt_prog_compiler_pic_RC" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl_RC='`$ECHO "$lt_prog_compiler_wl_RC" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static_RC='`$ECHO "$lt_prog_compiler_static_RC" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o_RC='`$ECHO "$lt_cv_prog_compiler_c_o_RC" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc_RC='`$ECHO "$archive_cmds_need_lc_RC" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes_RC='`$ECHO "$enable_shared_with_static_runtimes_RC" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec_RC='`$ECHO "$export_dynamic_flag_spec_RC" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec_RC='`$ECHO "$whole_archive_flag_spec_RC" | $SED "$delay_single_quote_subst"`' +compiler_needs_object_RC='`$ECHO "$compiler_needs_object_RC" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds_RC='`$ECHO "$old_archive_from_new_cmds_RC" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds_RC='`$ECHO "$old_archive_from_expsyms_cmds_RC" | $SED "$delay_single_quote_subst"`' +archive_cmds_RC='`$ECHO "$archive_cmds_RC" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds_RC='`$ECHO "$archive_expsym_cmds_RC" | $SED "$delay_single_quote_subst"`' +module_cmds_RC='`$ECHO "$module_cmds_RC" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds_RC='`$ECHO "$module_expsym_cmds_RC" | $SED "$delay_single_quote_subst"`' +with_gnu_ld_RC='`$ECHO "$with_gnu_ld_RC" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag_RC='`$ECHO "$allow_undefined_flag_RC" | $SED "$delay_single_quote_subst"`' +no_undefined_flag_RC='`$ECHO "$no_undefined_flag_RC" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_RC='`$ECHO "$hardcode_libdir_flag_spec_RC" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator_RC='`$ECHO "$hardcode_libdir_separator_RC" | $SED "$delay_single_quote_subst"`' +hardcode_direct_RC='`$ECHO "$hardcode_direct_RC" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute_RC='`$ECHO "$hardcode_direct_absolute_RC" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L_RC='`$ECHO "$hardcode_minus_L_RC" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var_RC='`$ECHO "$hardcode_shlibpath_var_RC" | $SED "$delay_single_quote_subst"`' +hardcode_automatic_RC='`$ECHO "$hardcode_automatic_RC" | $SED "$delay_single_quote_subst"`' +inherit_rpath_RC='`$ECHO "$inherit_rpath_RC" | $SED "$delay_single_quote_subst"`' +link_all_deplibs_RC='`$ECHO "$link_all_deplibs_RC" | $SED "$delay_single_quote_subst"`' +always_export_symbols_RC='`$ECHO "$always_export_symbols_RC" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds_RC='`$ECHO "$export_symbols_cmds_RC" | $SED "$delay_single_quote_subst"`' +exclude_expsyms_RC='`$ECHO "$exclude_expsyms_RC" | $SED "$delay_single_quote_subst"`' +include_expsyms_RC='`$ECHO "$include_expsyms_RC" | $SED "$delay_single_quote_subst"`' +prelink_cmds_RC='`$ECHO "$prelink_cmds_RC" | $SED "$delay_single_quote_subst"`' +postlink_cmds_RC='`$ECHO "$postlink_cmds_RC" | $SED "$delay_single_quote_subst"`' +file_list_spec_RC='`$ECHO "$file_list_spec_RC" | $SED "$delay_single_quote_subst"`' +hardcode_action_RC='`$ECHO "$hardcode_action_RC" | $SED "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in AS \ +DLLTOOL \ +OBJDUMP \ +SHELL \ +ECHO \ +PATH_SEPARATOR \ +SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +deplibs_check_method \ +file_magic_cmd \ +file_magic_glob \ +want_nocaseglob \ +sharedlib_from_linklib_cmd \ +AR \ +AR_FLAGS \ +archiver_list_spec \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +nm_file_list_spec \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_pic \ +lt_prog_compiler_wl \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +MANIFEST_TOOL \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_separator \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +install_override_mode \ +finish_eval \ +old_striplib \ +striplib \ +LD_RC \ +reload_flag_RC \ +compiler_RC \ +lt_prog_compiler_no_builtin_flag_RC \ +lt_prog_compiler_pic_RC \ +lt_prog_compiler_wl_RC \ +lt_prog_compiler_static_RC \ +lt_cv_prog_compiler_c_o_RC \ +export_dynamic_flag_spec_RC \ +whole_archive_flag_spec_RC \ +compiler_needs_object_RC \ +with_gnu_ld_RC \ +allow_undefined_flag_RC \ +no_undefined_flag_RC \ +hardcode_libdir_flag_spec_RC \ +hardcode_libdir_separator_RC \ +exclude_expsyms_RC \ +include_expsyms_RC \ +file_list_spec_RC; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postlink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec \ +reload_cmds_RC \ +old_archive_cmds_RC \ +old_archive_from_new_cmds_RC \ +old_archive_from_expsyms_cmds_RC \ +archive_cmds_RC \ +archive_expsym_cmds_RC \ +module_cmds_RC \ +module_expsym_cmds_RC \ +export_symbols_cmds_RC \ +prelink_cmds_RC \ +postlink_cmds_RC; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' + + + + + +# Capture the value of obsolete ALL_LINGUAS because we need it to compute + # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it + # from automake < 1.5. + eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' + # Capture the value of LINGUAS because we need it to compute CATALOGS. + LINGUAS="${LINGUAS-%UNSET%}" + + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; + "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; + "m4/Makefile") CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;; + "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; + "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; + "lang/Makefile") CONFIG_FILES="$CONFIG_FILES lang/Makefile" ;; + "lang/cl/Makefile") CONFIG_FILES="$CONFIG_FILES lang/cl/Makefile" ;; + "lang/cl/gpg-error.asd") CONFIG_FILES="$CONFIG_FILES lang/cl/gpg-error.asd" ;; + "src/versioninfo.rc") CONFIG_FILES="$CONFIG_FILES src/versioninfo.rc" ;; + "src/gpg-error.w32-manifest") CONFIG_FILES="$CONFIG_FILES src/gpg-error.w32-manifest" ;; + "src/gpg-error-config") CONFIG_FILES="$CONFIG_FILES src/gpg-error-config" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + "libtool":C) + + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from https://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + +# The names of the tagged configurations supported by this script. +available_tags="RC " + +# ### BEGIN LIBTOOL CONFIG + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Assembler program. +AS=$lt_AS + +# DLL creation program. +DLLTOOL=$lt_DLLTOOL + +# Object dumper program. +OBJDUMP=$lt_OBJDUMP + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that protects backslashes. +ECHO=$lt_ECHO + +# The PATH separator for the build system. +PATH_SEPARATOR=$lt_PATH_SEPARATOR + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# convert \$build file names to \$host format. +to_host_file_cmd=$lt_cv_to_host_file_cmd + +# convert \$build files to toolchain format. +to_tool_file_cmd=$lt_cv_to_tool_file_cmd + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method = "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# How to find potential files when deplibs_check_method = "file_magic". +file_magic_glob=$lt_file_magic_glob + +# Find potential files using nocaseglob when deplibs_check_method = "file_magic". +want_nocaseglob=$lt_want_nocaseglob + +# Command to associate shared and link libraries. +sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd + +# The archiver. +AR=$lt_AR + +# Flags to create an archive. +AR_FLAGS=$lt_AR_FLAGS + +# How to feed a file listing to the archiver. +archiver_list_spec=$lt_archiver_list_spec + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Whether to use a lock for old archive extraction. +lock_old_archive_extraction=$lock_old_archive_extraction + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# Specify filename containing input files for \$NM. +nm_file_list_spec=$lt_nm_file_list_spec + +# The root where to search for dependent libraries,and in which our libraries should be installed. +lt_sysroot=$lt_sysroot + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Manifest tool. +MANIFEST_TOOL=$lt_MANIFEST_TOOL + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Permission mode override for installation of shared libraries. +install_override_mode=$lt_install_override_mode + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain="$ac_aux_dir/ltmain.sh" + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + if test x"$xsi_shell" = xyes; then + sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ +func_dirname ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_basename ()$/,/^} # func_basename /c\ +func_basename ()\ +{\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ +func_dirname_and_basename ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ +func_stripname ()\ +{\ +\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ +\ # positional parameters, so assign one to ordinary parameter first.\ +\ func_stripname_result=${3}\ +\ func_stripname_result=${func_stripname_result#"${1}"}\ +\ func_stripname_result=${func_stripname_result%"${2}"}\ +} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ +func_split_long_opt ()\ +{\ +\ func_split_long_opt_name=${1%%=*}\ +\ func_split_long_opt_arg=${1#*=}\ +} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ +func_split_short_opt ()\ +{\ +\ func_split_short_opt_arg=${1#??}\ +\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ +} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ +func_lo2o ()\ +{\ +\ case ${1} in\ +\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ +\ *) func_lo2o_result=${1} ;;\ +\ esac\ +} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_xform ()$/,/^} # func_xform /c\ +func_xform ()\ +{\ + func_xform_result=${1%.*}.lo\ +} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_arith ()$/,/^} # func_arith /c\ +func_arith ()\ +{\ + func_arith_result=$(( $* ))\ +} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_len ()$/,/^} # func_len /c\ +func_len ()\ +{\ + func_len_result=${#1}\ +} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + +fi + +if test x"$lt_shell_append" = xyes; then + sed -e '/^func_append ()$/,/^} # func_append /c\ +func_append ()\ +{\ + eval "${1}+=\\${2}"\ +} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ +func_append_quoted ()\ +{\ +\ func_quote_for_eval "${2}"\ +\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ +} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 +$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} +fi + + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + + cat <<_LT_EOF >> "$ofile" + +# ### BEGIN LIBTOOL TAG CONFIG: RC + +# The linker used to build libraries. +LD=$lt_LD_RC + +# How to create reloadable object files. +reload_flag=$lt_reload_flag_RC +reload_cmds=$lt_reload_cmds_RC + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds_RC + +# A language specific compiler. +CC=$lt_compiler_RC + +# Is the compiler the GNU compiler? +with_gcc=$GCC_RC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_RC + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_RC + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_RC + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_RC + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object_RC + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds_RC +archive_expsym_cmds=$lt_archive_expsym_cmds_RC + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds_RC +module_expsym_cmds=$lt_module_expsym_cmds_RC + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld_RC + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_RC + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_RC + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct_RC + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute_RC + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L_RC + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_RC + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic_RC + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath_RC + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_RC + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols_RC + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_RC + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_RC + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_RC + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds_RC + +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds_RC + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec_RC + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_RC + +# ### END LIBTOOL TAG CONFIG: RC +_LT_EOF + + ;; + "po-directories":C) + for ac_file in $CONFIG_FILES; do + # Support "outfile[:infile[:infile...]]" + case "$ac_file" in + *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + esac + # PO directories have a Makefile.in generated from Makefile.in.in. + case "$ac_file" in */Makefile.in) + # Adjust a relative srcdir. + ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` + ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` + ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` + # In autoconf-2.13 it is called $ac_given_srcdir. + # In autoconf-2.50 it is called $srcdir. + test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" + case "$ac_given_srcdir" in + .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; + /*) top_srcdir="$ac_given_srcdir" ;; + *) top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + # Treat a directory as a PO directory if and only if it has a + # POTFILES.in file. This allows packages to have multiple PO + # directories under different names or in different locations. + if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then + rm -f "$ac_dir/POTFILES" + test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" + gt_tab=`printf '\t'` + cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" + POMAKEFILEDEPS="POTFILES.in" + # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend + # on $ac_dir but don't depend on user-specified configuration + # parameters. + if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then + # The LINGUAS file contains the set of available languages. + if test -n "$OBSOLETE_ALL_LINGUAS"; then + test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" + fi + ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` + # Hide the ALL_LINGUAS assignment from automake < 1.5. + eval 'ALL_LINGUAS''=$ALL_LINGUAS_' + POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" + else + # The set of available languages was given in configure.in. + # Hide the ALL_LINGUAS assignment from automake < 1.5. + eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' + fi + # Compute POFILES + # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) + # Compute UPDATEPOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) + # Compute DUMMYPOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) + # Compute GMOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) + case "$ac_given_srcdir" in + .) srcdirpre= ;; + *) srcdirpre='$(srcdir)/' ;; + esac + POFILES= + UPDATEPOFILES= + DUMMYPOFILES= + GMOFILES= + for lang in $ALL_LINGUAS; do + POFILES="$POFILES $srcdirpre$lang.po" + UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" + DUMMYPOFILES="$DUMMYPOFILES $lang.nop" + GMOFILES="$GMOFILES $srcdirpre$lang.gmo" + done + # CATALOGS depends on both $ac_dir and the user's LINGUAS + # environment variable. + INST_LINGUAS= + if test -n "$ALL_LINGUAS"; then + for presentlang in $ALL_LINGUAS; do + useit=no + if test "%UNSET%" != "$LINGUAS"; then + desiredlanguages="$LINGUAS" + else + desiredlanguages="$ALL_LINGUAS" + fi + for desiredlang in $desiredlanguages; do + # Use the presentlang catalog if desiredlang is + # a. equal to presentlang, or + # b. a variant of presentlang (because in this case, + # presentlang can be used as a fallback for messages + # which are not translated in the desiredlang catalog). + case "$desiredlang" in + "$presentlang"*) useit=yes;; + esac + done + if test $useit = yes; then + INST_LINGUAS="$INST_LINGUAS $presentlang" + fi + done + fi + CATALOGS= + if test -n "$INST_LINGUAS"; then + for lang in $INST_LINGUAS; do + CATALOGS="$CATALOGS $lang.gmo" + done + fi + test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" + sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" + for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do + if test -f "$f"; then + case "$f" in + *.orig | *.bak | *~) ;; + *) cat "$f" >> "$ac_dir/Makefile" ;; + esac + fi + done + fi + ;; + esac + done ;; + "src/gpg-error-config":F) chmod +x src/gpg-error-config ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + + +tmp= +if test "$have_w32_system" != yes; then + if test x"$gl_use_threads" = xno; then + tmp=" NO-THREADS" + fi +fi +echo " + $PACKAGE_NAME v$PACKAGE_VERSION has been configured as follows: + + Revision: 10a984d (4265) + Platform: $host$tmp +" +if test "$gcry_cv_gcc_attribute_aligned" != "yes" ; then +cat <. +# SPDX-License-Identifier: LGPL-2.1+ + +# (Process this file with autoconf to produce a configure script.) +# The following lines are used by ./autogen.sh. +AC_PREREQ(2.59) +min_automake_version="1.14" + +# To build a release you need to create a tag with the version number +# (git tag -s libgpg-error-n.m) and run "./autogen.sh --force". +# Please bump the version number immediately after the release, do +# another commit, and a push so that the git magic is able to work. +# See below for the LT versions. +m4_define([mym4_package],[libgpg-error]) +m4_define([mym4_major], [1]) +m4_define([mym4_minor], [31]) + +# Below is m4 magic to extract and compute the revision number, the +# decimalized short revision number, a beta version string, and a flag +# indicating a development version (mym4_isgit). Note that the m4 +# processing is done by autoconf and not during the configure run. +m4_define([mym4_verslist], m4_split(m4_esyscmd([./autogen.sh --find-version] \ + mym4_package mym4_major mym4_minor),[:])) +m4_define([mym4_isbeta], m4_argn(2, mym4_verslist)) +m4_define([mym4_version], m4_argn(4, mym4_verslist)) +m4_define([mym4_revision], m4_argn(7, mym4_verslist)) +m4_define([mym4_revision_dec], m4_argn(8, mym4_verslist)) +m4_esyscmd([echo ]mym4_version[>VERSION]) +AC_INIT([mym4_package],[mym4_version], [https://bugs.gnupg.org]) +# LT Version numbers, remember to change them just *before* a release. +# (Code changed: REVISION++) +# (Interfaces added/removed/changed: CURRENT++, REVISION=0) +# (Interfaces added: AGE++) +# (Interfaces removed: AGE=0) +# Note that added error codes don't constitute an interface change. +LIBGPG_ERROR_LT_CURRENT=24 +LIBGPG_ERROR_LT_AGE=24 +LIBGPG_ERROR_LT_REVISION=2 +################################################ + +AC_SUBST(LIBGPG_ERROR_LT_CURRENT) +AC_SUBST(LIBGPG_ERROR_LT_AGE) +AC_SUBST(LIBGPG_ERROR_LT_REVISION) + +VERSION_NUMBER=m4_esyscmd(printf "0x%02x%02x00" mym4_major mym4_minor) +AC_SUBST(VERSION_NUMBER) + +AC_CONFIG_AUX_DIR([build-aux]) +AM_INIT_AUTOMAKE([serial-tests dist-bzip2]) +AM_MAINTAINER_MODE +AC_CONFIG_SRCDIR([src/err-sources.h.in]) +AC_CONFIG_HEADER([config.h]) +AC_CONFIG_MACRO_DIR([m4]) +AM_SILENT_RULES + +# We need to know about the host architecture to avoid spurious +# warnings. +AC_CANONICAL_HOST +AB_INIT + +# Checks for programs. +AC_PROG_CC +AM_PROG_CC_C_O +AC_PROG_CPP +AC_PROG_AWK +AC_CHECK_TOOL(AR, ar, :) +AC_GNU_SOURCE + +# Set some variables depending on the platform for later use. +have_w32_system=no +have_w64_system=no +have_w32ce_system=no +case "${host}" in + x86_64-*mingw32*) + have_w32_system=yes + have_w64_system=yes + ;; + *-mingw32ce*) + have_w32_system=yes + have_w32ce_system=yes + ;; + *-mingw32*) + have_w32_system=yes + ;; + *-apple-darwin*) + # This is the equivalent of the _GNU_SOURCE feature-test-macro + # on GNU libc systems. + AC_DEFINE(_DARWIN_C_SOURCE, 900000L, + Expose all libc features (__DARWIN_C_FULL).) + ;; + *) + ;; +esac + + +if test "$have_w32_system" != yes; then + gl_THREADLIB_EARLY +fi + +# We build libgpg-error with large file support so that we have a 64 +# bit off_t. Our external interface uses the gpgrt_off_t which is +# anyway specified as 64 bit. Thus the same libgpg-error can be used +# by software which is not build with large file support. +AC_SYS_LARGEFILE + + +LT_PREREQ([2.2.6]) +LT_INIT([win32-dll disable-static]) +LT_LANG([Windows Resource]) + + +# We need to compile and run a program on the build machine. +dnl The AC_PROG_CC_FOR_BUILD macro in the AC archive is broken for +dnl autoconf 2.57. +dnl AC_PROG_CC_FOR_BUILD +AC_MSG_CHECKING(for cc for build) +if test "$cross_compiling" = "yes"; then + CC_FOR_BUILD="${CC_FOR_BUILD-cc}" +else + CC_FOR_BUILD="${CC_FOR_BUILD-$CC}" +fi +AC_MSG_RESULT($CC_FOR_BUILD) +AC_ARG_VAR(CC_FOR_BUILD,[build system C compiler]) + +AC_PATH_PROG(YAT2M, yat2m) +AC_ARG_VAR(YAT2M, [tool to convert texi to man pages]) +AM_CONDITIONAL(HAVE_YAT2M, test -n "$ac_cv_path_YAT2M") + +AH_BOTTOM([ +/* Force using of NLS for W32 even if no libintl has been found. This is + okay because we have our own gettext implementation for W32. */ +#if defined(HAVE_W32_SYSTEM) && !defined(ENABLE_NLS) +#define ENABLE_NLS 1 +#endif + +/* Connect the generic estream-printf.c to our framework. */ +#define _ESTREAM_PRINTF_REALLOC _gpgrt_realloc +#define _ESTREAM_PRINTF_EXTRA_INCLUDE "gpgrt-int.h" + +/* For building we need to define these macro. */ +#define GPG_ERR_ENABLE_GETTEXT_MACROS 1 +#define GPG_ERR_ENABLE_ERRNO_MACROS 1 +#define GPGRT_ENABLE_ES_MACROS 1 +#define GPGRT_ENABLE_LOG_MACROS 1 +#define GPGRT_ENABLE_ARGPARSE_MACROS 1 +]) + + +# Note, that autogen.sh greps for the next line. +AM_GNU_GETTEXT_VERSION([0.19.3]) +AM_GNU_GETTEXT([external]) + +# Checks for header files. +AC_HEADER_STDC +AC_CHECK_HEADERS([stdlib.h locale.h stdint.h sys/select.h sys/time.h \ + signal.h]) + +AC_FUNC_STRERROR_R +case "${host_os}" in + solaris*) + # All versions of Solaris from 2.4 have a thread-safe strerror(). + # Since Solaris 10, in addition strerror_r() exists. + ;; + *) + AC_CHECK_FUNC([strerror_r], [], +AC_MSG_WARN([[Without strerror_r, gpg_strerror_r might not be thread-safe]])) + ;; +esac + +AC_FUNC_FORK +AC_CHECK_FUNCS([flockfile vasprintf mmap rand strlwr stpcpy setenv stat \ + getrlimit ]) + + +# +# Checks for typedefs, structures, and compiler characteristics. +# +AC_C_CONST + +AC_CHECK_SIZEOF(int) +AC_CHECK_SIZEOF(long) +AC_CHECK_SIZEOF(long long) +AC_HEADER_TIME +AC_CHECK_SIZEOF(time_t,,[[ +#include +#if TIME_WITH_SYS_TIME +# include +# include +#else +# if HAVE_SYS_TIME_H +# include +# else +# include +# endif +#endif +]]) + +GNUPG_FUNC_MKDIR_TAKES_ONE_ARG + + +# Find a 64 bit integer type to be used instead of off_t. We prefer +# the standard integer types over int64_t and finally try long long. +if test "$ac_cv_sizeof_int" = "8"; then + replacement_for_off_t="int" +elif test "$ac_cv_sizeof_long" = "8"; then + replacement_for_off_t="long" +elif test "$ac_cv_header_stdint_h" = yes; then + replacement_for_off_t="int64_t" +elif test "$ac_cv_sizeof_long_long" = "8"; then + replacement_for_off_t="long long" +else + AC_MSG_ERROR([[ +*** +*** No 64 bit signed integer type found. Can't build this library. +***]]) +fi +AC_DEFINE_UNQUOTED(REPLACEMENT_FOR_OFF_T, "$replacement_for_off_t", + [Used by mkheader to insert the replacement type.]) + + +# +# Setup gcc specific options +# +AC_MSG_NOTICE([checking for cc features]) +if test "$GCC" = yes; then + # Check whether gcc does not emit a diagnostic for unknown -Wno-* + # options. This is the case for gcc >= 4.6 + AC_MSG_CHECKING([if gcc ignores unknown -Wno-* options]) + AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ +#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 6 ) +#kickerror +#endif]],[])],[_gcc_silent_wno=yes],[_gcc_silent_wno=no]) + AC_MSG_RESULT($_gcc_silent_wno) + + # Note that it is okay to use CFLAGS here because these are just + # warning options and the user should have a chance of overriding + # them. + if test "$USE_MAINTAINER_MODE" = "yes"; then + M_CFLAGS="-O3 -Wall -Wcast-align -Wshadow -Wstrict-prototypes" + M_CFLAGS="$M_CFLAGS -Wformat -Wno-format-y2k -Wformat-security" + if test x"$_gcc_silent_wno" = xyes ; then + _gcc_wopt=yes + else + AC_MSG_CHECKING([if gcc supports -Wno-missing-field-initializers]) + _gcc_cflags_save=$CFLAGS + CFLAGS="-Wno-missing-field-initializers" + AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[])], + [_gcc_wopt=yes],[_gcc_wopt=no]) + AC_MSG_RESULT($_gcc_wopt) + CFLAGS=$_gcc_cflags_save; + fi + if test x"$_gcc_wopt" = xyes ; then + M_CFLAGS="$M_CFLAGS -W -Wno-sign-compare -Wno-missing-field-initializers" + fi + + AC_MSG_CHECKING([if gcc supports -Wdeclaration-after-statement]) + _gcc_cflags_save=$CFLAGS + CFLAGS="-Wdeclaration-after-statement" + AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[])],_gcc_wopt=yes,_gcc_wopt=no) + AC_MSG_RESULT($_gcc_wopt) + CFLAGS=$_gcc_cflags_save; + if test x"$_gcc_wopt" = xyes ; then + M_CFLAGS="$M_CFLAGS -Wdeclaration-after-statement" + fi + + # Prepend the maintainer-cflags so that the user can override + # them, e.g. to override the optimization flags for debugging. + CFLAGS="$M_CFLAGS $CFLAGS" + else + CFLAGS="$CFLAGS -Wall" + fi + + AC_MSG_CHECKING([if gcc supports -Wpointer-arith]) + _gcc_cflags_save=$CFLAGS + CFLAGS="-Wpointer-arith" + AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[])],_gcc_psign=yes,_gcc_psign=no) + AC_MSG_RESULT($_gcc_psign) + CFLAGS=$_gcc_cflags_save; + if test x"$_gcc_psign" = xyes ; then + CFLAGS="$CFLAGS -Wpointer-arith" + fi + + # The undocumented option -Wno-psabi suppresses the annoying + # "the ABI of passing union with long double has changed in GCC 4.4" + # which is emitted in estream-printf.c but entirely irrelvant + # because that union is local to the file. + if test x"$_gcc_silent_wno" = xyes ; then + CFLAGS="$CFLAGS -Wno-psabi" + fi +fi + +# +# Check whether the compiler supports the GCC style aligned attribute +# +AC_CACHE_CHECK([whether the GCC style aligned attribute is supported], + [gcry_cv_gcc_attribute_aligned], + [gcry_cv_gcc_attribute_aligned=no + AC_COMPILE_IFELSE([AC_LANG_SOURCE( + [[struct { int a; } foo __attribute__ ((aligned (16)));]])], + [gcry_cv_gcc_attribute_aligned=yes])]) +if test "$gcry_cv_gcc_attribute_aligned" = "yes" ; then + AC_DEFINE(HAVE_GCC_ATTRIBUTE_ALIGNED,1, + [Defined if a GCC style "__attribute__ ((aligned (n))" is supported]) +fi + +# +# Check for ELF visibility support. +# +AC_CACHE_CHECK(whether the visibility attribute is supported, + gcry_cv_visibility_attribute, + [gcry_cv_visibility_attribute=no + AC_LANG_CONFTEST([AC_LANG_SOURCE( + [[int foo __attribute__ ((visibility ("hidden"))) = 1; + int bar __attribute__ ((visibility ("protected"))) = 1; + ]])]) + + if ${CC-cc} -Werror -S conftest.c -o conftest.s \ + 1>&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ; then + if grep '\.hidden.*foo' conftest.s >/dev/null 2>&1 ; then + if grep '\.protected.*bar' conftest.s >/dev/null 2>&1; then + gcry_cv_visibility_attribute=yes + fi + fi + fi + ]) +if test "$gcry_cv_visibility_attribute" = "yes"; then + AC_CACHE_CHECK(for broken visibility attribute, + gcry_cv_broken_visibility_attribute, + [gcry_cv_broken_visibility_attribute=yes + AC_LANG_CONFTEST([AC_LANG_SOURCE( + [[int foo (int x); + int bar (int x) __asm__ ("foo") + __attribute__ ((visibility ("hidden"))); + int bar (int x) { return x; } + ]])]) + + if ${CC-cc} -Werror -S conftest.c -o conftest.s \ + 1>&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ; then + if grep '\.hidden@<:@ _@:>@foo' conftest.s >/dev/null 2>&1; + then + gcry_cv_broken_visibility_attribute=no + fi + fi + ]) +fi +if test "$gcry_cv_visibility_attribute" = "yes"; then + AC_CACHE_CHECK(for broken alias attribute, + gcry_cv_broken_alias_attribute, + [gcry_cv_broken_alias_attribute=yes + AC_LANG_CONFTEST([AC_LANG_SOURCE( + [[extern int foo (int x) __asm ("xyzzy"); + int bar (int x) { return x; } + extern __typeof (bar) foo __attribute ((weak, alias ("bar"))); + extern int dfoo; + extern __typeof (dfoo) dfoo __asm ("abccb"); + int dfoo = 1; + ]])]) + + if ${CC-cc} -Werror -S conftest.c -o conftest.s \ + 1>&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD ; then + if grep 'xyzzy' conftest.s >/dev/null 2>&1 && \ + grep 'abccb' conftest.s >/dev/null 2>&1; then + gcry_cv_broken_alias_attribute=no + fi + fi + ]) +fi +if test "$gcry_cv_visibility_attribute" = "yes"; then + AC_CACHE_CHECK(if gcc supports -fvisibility=hidden, + gcry_cv_gcc_has_f_visibility, + [gcry_cv_gcc_has_f_visibility=no + _gcc_cflags_save=$CFLAGS + CFLAGS="-fvisibility=hidden" + AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[])], + gcry_cv_gcc_has_f_visibility=yes) + CFLAGS=$_gcc_cflags_save; + ]) +fi +if test "$gcry_cv_visibility_attribute" = "yes" \ + && test "$gcry_cv_broken_visibility_attribute" != "yes" \ + && test "$gcry_cv_broken_alias_attribute" != "yes" \ + && test "$gcry_cv_gcc_has_f_visibility" = "yes" + then + AC_DEFINE(GPGRT_USE_VISIBILITY, 1, + [Define to use the GNU C visibility attribute.]) + CFLAGS="$CFLAGS -fvisibility=hidden" +fi + +# +# Check whether ld supports a version script. +# (Actually not a check but a list of systems which are known to support it.) +# +have_ld_version_script=no +case "${host}" in + *-*-linux*) + have_ld_version_script=yes + ;; + *-*-gnu*) + have_ld_version_script=yes + ;; +esac +AC_ARG_ENABLE([ld-version-script], + AC_HELP_STRING([--enable-ld-version-script], + [enable/disable use of linker version script. + (default is system dependent)]), + [have_ld_version_script=$enableval], + [ : ] ) +AM_CONDITIONAL(HAVE_LD_VERSION_SCRIPT, test "$have_ld_version_script" = "yes") + + +# +# Check for thread library. +# +# Windows has always thread support; thus we don't bother to test for +# it as it may lead to false results when cross building. +if test "$have_w32_system" = yes; then + AC_DEFINE([USE_WINDOWS_THREADS], [1]) + LIBTHREAD= + LTLIBTHREAD= + LIBMULTITHREAD= + LTLIBMULTITHREAD= + THREADLIB_CPPFLAGS="" + AC_SUBST([LIBTHREAD]) + AC_SUBST([LTLIBTHREAD]) + AC_SUBST([LIBMULTITHREAD]) + AC_SUBST([LTLIBMULTITHREAD]) +else + gl_LOCK + if test "$gl_threads_api" = posix; then + AC_CHECK_SIZEOF(pthread_mutex_t,,[AC_INCLUDES_DEFAULT + #include ]) + fi +fi + +# Default value for GPG_ERROR_CONFIG_LIBS +config_libs="-lgpg-error" + +# +# Check for other libraries +# +LIB_SCHED_YIELD= +AC_SUBST([LIB_SCHED_YIELD]) +AC_SEARCH_LIBS([sched_yield], [rt posix4], + [if test "$ac_cv_search_sched_yield" != "none required"; then + LIB_SCHED_YIELD=$ac_cv_search_sched_yield + config_libs="$config_libs $LIB_SCHED_YIELD" + fi]) + +LIB_NETWORK= +AC_SUBST([LIB_NETWORK]) +AC_SEARCH_LIBS([inet_addr], [nsl], + [if test "$ac_cv_search_inet_addr" != "none required"; then + LIB_NETWORK=$ac_cv_search_inet_addr + fi]) +AC_SEARCH_LIBS([socket], [socket], + [if test "$ac_cv_search_socket" != "none required"; then + LIB_NETWORK="$ac_cv_search_socket $LIB_NETWORK" + fi], [], [$LIB_NETWORK]) +if test "x$LIB_NETWORK" != x; then + config_libs="$config_libs $LIB_NETWORK" +fi + +# Check for optional readline support +GNUPG_CHECK_READLINE + + +# +# Prepare building of estream +# +estream_INIT + +# +# Substitution used for gpg-error-config +# +GPG_ERROR_CONFIG_LIBS="$config_libs" +if test "x$LIBTHREAD" != x; then + GPG_ERROR_CONFIG_LIBS="${GPG_ERROR_CONFIG_LIBS} ${LIBTHREAD}" +fi +if test "x$LIBMULTITHREAD" != x; then + GPG_ERROR_CONFIG_MT_LIBS="${LIBMULTITHREAD}" +else + GPG_ERROR_CONFIG_MT_LIBS="" +fi +GPG_ERROR_CONFIG_CFLAGS="" +if test "x$THREADLIB_CPPFLAGS" != x; then + GPG_ERROR_CONFIG_MT_CFLAGS="${THREADLIB_CPPFLAGS}" +else + GPG_ERROR_CONFIG_MT_CFLAGS="" +fi +GPG_ERROR_CONFIG_ISUBDIRAFTER="" +GPG_ERROR_CONFIG_HOST="$host" +AC_SUBST(GPG_ERROR_CONFIG_LIBS) +AC_SUBST(GPG_ERROR_CONFIG_CFLAGS) +AC_SUBST(GPG_ERROR_CONFIG_MT_LIBS) +AC_SUBST(GPG_ERROR_CONFIG_MT_CFLAGS) +AC_SUBST(GPG_ERROR_CONFIG_ISUBDIRAFTER) +AC_SUBST(GPG_ERROR_CONFIG_HOST) + + +# +# Special defines for certain platforms +# +force_use_syscfg=no +if test "$have_w32_system" = yes; then + AC_DEFINE(HAVE_W32_SYSTEM,1,[Defined if we run on a W32 API based system]) + if test "$have_w64_system" = yes; then + AC_DEFINE(HAVE_W64_SYSTEM,1,[Defined if we run on 64 bit W32 API system]) + fi + if test "$have_w32ce_system" = yes; then + AC_DEFINE(HAVE_W32CE_SYSTEM,1,[Defined if we run on WindowsCE]) + GPG_ERROR_CONFIG_ISUBDIRAFTER="gpg-extra" + fi + force_use_syscfg=yes +fi +if test x$cross_compiling = xyes; then + force_use_syscfg=yes +fi + +AM_CONDITIONAL(HAVE_W32_SYSTEM, test "$have_w32_system" = yes) +AM_CONDITIONAL(HAVE_W64_SYSTEM, test "$have_w64_system" = yes) +AM_CONDITIONAL(HAVE_W32CE_SYSTEM, test "$have_w32ce_system" = yes) +AM_CONDITIONAL(CROSS_COMPILING, test x$cross_compiling = xyes) +AM_CONDITIONAL(FORCE_USE_SYSCFG, test x$force_use_syscfg = xyes) + +AC_DEFINE_UNQUOTED(HOST_TRIPLET_STRING, "$host", [The host triplet]) + + +# +# gpgrt_log_clock may require linking with extra libaries. As long as +# we don't have a good test for this we require the use of this +# configure option to enabling printing of a timestamp. +# +AC_MSG_CHECKING([whether to enable log_clock]) +AC_ARG_ENABLE(log_clock, + AC_HELP_STRING([--enable-log-clock], + [enable log_clock timestamps]), + enable_log_clock=$enableval, enable_log_clock=no) +AC_MSG_RESULT($enable_log_clock) +if test "$enable_log_clock" = yes ; then + AC_DEFINE(ENABLE_LOG_CLOCK,1,[Defined to use log_clock timestamps]) +fi + +# +# For now we do not build gpgscm by default. +# Eventually we will reverse the meaning of that option. +# +build_gpgscm=no +#AC_MSG_CHECKING([whether to build gpgscm]) +#AC_ARG_ENABLE(gpgscm, +# AC_HELP_STRING([--enable-gpgscm], +# [build the gpgscm tool]), +# build_gpgscm=$enableval, build_gpgscm=no) +#AC_MSG_RESULT($build_gpgscm) +AM_CONDITIONAL([BUILD_GPGSCM], [test "x$build_gpgscm" != xno]) + + +# +# Add -Werror to CFLAGS. This hack can be used to avoid problems with +# misbehaving autoconf tests in case the user supplied -Werror. +# +AC_ARG_ENABLE(werror, + AC_HELP_STRING([--enable-werror], + [append -Werror to CFLAGS]), + [if test $enableval = yes ; then + CFLAGS="$CFLAGS -Werror" + fi]) + + +# +# Provide information about the build. +# +BUILD_REVISION="mym4_revision" +AC_SUBST(BUILD_REVISION) +AC_DEFINE_UNQUOTED(BUILD_REVISION, "$BUILD_REVISION", + [GIT commit id revision used to build this package]) + +changequote(,)dnl +BUILD_VERSION=`echo "$PACKAGE_VERSION"|sed 's/\([0-9.]*\).*/\1./'` +changequote([,])dnl +BUILD_VERSION="${BUILD_VERSION}0.mym4_revision_dec" +BUILD_FILEVERSION=`echo "${BUILD_VERSION}" | tr . ,` +AC_SUBST(BUILD_VERSION) +AC_SUBST(BUILD_FILEVERSION) + +AC_ARG_ENABLE([build-timestamp], + AC_HELP_STRING([--enable-build-timestamp], + [set an explicit build timestamp for reproducibility. + (default is the current time in ISO-8601 format)]), + [if test "$enableval" = "yes"; then + BUILD_TIMESTAMP=`date -u +%Y-%m-%dT%H:%M+0000 2>/dev/null || date` + else + BUILD_TIMESTAMP="$enableval" + fi], + [BUILD_TIMESTAMP=""]) +AC_SUBST(BUILD_TIMESTAMP) +AC_DEFINE_UNQUOTED(BUILD_TIMESTAMP, "$BUILD_TIMESTAMP", + [The time this package was configured for a build]) + + + +AC_ARG_ENABLE(languages, AC_HELP_STRING([--disable-languages], + [do not build support for other languages than C])) +AM_CONDITIONAL([LANGUAGES_SOME], [test "x$enable_languages" != xno]) + +build_doc=yes +AC_ARG_ENABLE([doc], AC_HELP_STRING([--disable-doc], + [do not build the documentation]), + build_doc=$enableval, build_doc=yes) +AM_CONDITIONAL([BUILD_DOC], [test "x$build_doc" != xno]) + +build_tests=yes +AC_ARG_ENABLE([tests], AC_HELP_STRING([--disable-tests], + [do not build the tests]), + build_tests=$enableval, build_tests=yes) +AM_CONDITIONAL([BUILD_TESTS], [test "x$build_tests" != xno]) + +# +# Substitution +# +AC_CONFIG_FILES([Makefile]) +AC_CONFIG_FILES([doc/Makefile po/Makefile.in m4/Makefile]) +AC_CONFIG_FILES([src/Makefile tests/Makefile]) +AC_CONFIG_FILES([lang/Makefile lang/cl/Makefile lang/cl/gpg-error.asd]) +AC_CONFIG_FILES([src/versioninfo.rc src/gpg-error.w32-manifest]) +AC_CONFIG_FILES([src/gpg-error-config], [chmod +x src/gpg-error-config]) + +AC_OUTPUT + +tmp= +if test "$have_w32_system" != yes; then + if test x"$gl_use_threads" = xno; then + tmp=" NO-THREADS" + fi +fi +echo " + $PACKAGE_NAME v$PACKAGE_VERSION has been configured as follows: + + Revision: mym4_revision (mym4_revision_dec) + Platform: $host$tmp +" +if test "$gcry_cv_gcc_attribute_aligned" != "yes" ; then +cat < + + NB: ChangeLog files are no longer manually maintained. Starting + on December 1st, 2011 we put change information only in the GIT + commit log, and generate a top-level ChangeLog file from logs at + "make dist". See doc/HACKING for details. + +2010-11-15 Marcus Brinkmann + + * conf-w32ce-msc/stdint.h: New file. + * conf-w32ce-msc/build.mk (conf_sources): Add stdint.h. + +2010-11-15 Werner Koch + + * conf-w32ce-msc/build.mk (clean): New. + +2010-11-02 Werner Koch + + * conf-w32ce-msc/build.mk: Change directory layout. Provide + install target. + +2010-10-28 Werner Koch + + * contrib/conf-w32ce-msc/build.mk: New. + * contrib/conf-w32ce-msc/config.h: New. diff --git a/doc/HACKING b/doc/HACKING new file mode 100644 index 0000000..33b56d5 --- /dev/null +++ b/doc/HACKING @@ -0,0 +1,81 @@ +# HACKING -*- org -*- +#+TITLE: Various hacking notes +#+STARTUP: showall + +* How to contribute + + The following stuff explains some basic procedures you need to + follow if you want to contribute code or documentation. + +* No more ChangeLog files + + Do not modify any of the ChangeLog files in Libgpg-error. Starting + on December 1st, 2011 we put change information only in the GIT + commit log, and generate a top-level ChangeLog file from logs at + "make dist" time. As such, there are strict requirements on the + form of the commit log messages. The old ChangeLog files have all + be renamed to ChangeLog-2011 + + +* Commit log requirements + + Your commit log should always start with a one-line summary, the + second line should be blank, and the remaining lines are usually + ChangeLog-style entries for all affected files. However, it's fine + -- even recommended -- to write a few lines of prose describing the + change, when the summary and ChangeLog entries don't give enough of + the big picture. Omit the leading TABs that you're used to seeing + in a "real" ChangeLog file, but keep the maximum line length at 72 + or smaller, so that the generated ChangeLog lines, each with its + leading TAB, will not exceed 80 columns. + +* Commit log keywords + + - GnuPG-bug-id :: Values are comma or space delimited bug numbers + from bug.gnupg.org pertaining to this commit. + - Debian-bug-id :: Same as above but from the Debian bug tracker. + - CVE-id :: CVE id number pertaining to this commit. + - Regression-due-to :: Commit id of the regression fixed by this commit. + - Fixes-commit :: Commit id this commit fixes. + - Reported-by :: Value is a name or mail address of a bug reporte. + - Suggested-by :: Value is a name or mail address of someone how + suggested this change. + - Co-authored-by :: Name or mail address of a co-author + - Some-comments-by :: Name or mail address of the author of + additional comments (commit log or code). + - Proofread-by :: Sometimes used by translation commits. + - Signed-off-by :: Name or mail address of the developer + +* Sending patches + + - submitting patches, and subsequent discussions around them, + happens via the gnupg-devel@gnupg.org public mailing list + + - send your patches to that list, preferably PGP/MIME signed. Make + sure to include a mention of 'libgpg-error' in the subject line, + the list is used for several different projects + + - if you're working from the git repo, here's a suggested workflow: + + - configure git send-email defaults: + + git config format.subjectPrefix 'PATCH libgpg-error' + git config sendemail.to gnupg-devel@gnupg.org + + Note that running ./autogen.sh on a fresh clone will do this for + you. + + - hack hack hack + + - commit your changes; group changes into easily-reviewable commit + units, feel free to submit several patches at once + + - e.g. if you want to submit a single patch on top of master, do: + git send-email --annotate -1 + + - e.g. if you have two commits on top of master, do: + git send-email --annotate --cover-letter -2 + (that prompts you for a summary mail to precede your actual + patch mails) + + - use --dry-run to test your setup diff --git a/doc/Makefile.am b/doc/Makefile.am new file mode 100644 index 0000000..76af5be --- /dev/null +++ b/doc/Makefile.am @@ -0,0 +1,95 @@ +# Makefile.am for libgpg-error documentation +# Copyright (C) 2014 g10 Code GmbH +# +# This file is part of libgpg-error. +# +# libgpg-error is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# libgpg-error is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this program; if not, see . + + +EXTRA_DIST = HACKING errorref.txt + +bin_PROGRAMS = yat2m +yat2m_SOURCES = yat2m.c +yat2m_CFLAGS= -DPACKAGE_VERSION="\"$(PACKAGE_VERSION)\"" + +DISTCLEANFILES = gpgrt.cps yat2m-stamp.tmp yat2m-stamp $(myman_pages) +CLEANFILES = errorref.txt.x + +info_TEXINFOS = gpgrt.texi +gpgrt_TEXINFOS = lgpl.texi gpl.texi + +YAT2M_OPTIONS = -I $(srcdir) \ + --release "Libgpg-error @PACKAGE_VERSION@" --source "GnuPG" + +myman_sources = gpgrt.texi +myman_pages = gpg-error-config.1 + +man_MANS = $(myman_pages) + +if HAVE_YAT2M +YAT2M_CMD = $(YAT2M) +YAT2M_DEP = $(YAT2M) +else +if CROSS_COMPILING +YAT2M_CMD = ./yat2m-for-build +YAT2M_DEP = yat2m-for-build +CLEANFILES += yat2m-for-build + +yat2m-for-build: yat2m.c + $(CC_FOR_BUILD) -o $@ $(srcdir)/yat2m.c +else +YAT2M_CMD = ./yat2m +YAT2M_DEP = yat2m +endif +endif + +yat2m-stamp: $(myman_sources) $(srcdir)/version.texi + @rm -f yat2m-stamp.tmp + @touch yat2m-stamp.tmp + for file in $(myman_sources) ; do \ + $(YAT2M_CMD) $(YAT2M_OPTIONS) --store \ + `test -f '$$file' || echo '$(srcdir)/'`$$file ; done + @mv -f yat2m-stamp.tmp $@ + +yat2m-stamp: $(YAT2M_DEP) + +$(myman_pages) : yat2m-stamp + @if test -f $@; then :; else \ + trap 'rm -rf yat2m-stamp yat2m-lock' 1 2 13 15; \ + if mkdir yat2m-lock 2>/dev/null; then \ + rm -f yat2m-stamp; \ + $(MAKE) $(AM_MAKEFLAGS) yat2m-stamp; \ + rmdir yat2m-lock; \ + else \ + while test -d yat2m-lock; do sleep 1; done; \ + test -f yat2m-stamp; exit $$?; \ + fi; \ + fi + +# Make sure that gpgrt.texi is touched if any other texi file has +# been modified. This is required so that the version.texi magic +# updates the release date. +gpgrt.texi : $(gpgrt_TEXINFOS) + touch $(srcdir)/gpgrt.texi + +errorref.txt.x : errorref.txt + sed '/^##/ d' $< >$@ + echo "# Installed by $(PACKAGE_NAME) $(PACKAGE_VERSION)" >>$@ + +install-data-local: errorref.txt.x + $(mkinstalldirs) $(DESTDIR)$(pkgdatadir) + $(INSTALL_DATA) errorref.txt.x $(DESTDIR)$(pkgdatadir)/errorref.txt + +uninstall-local: + -@rm $(DESTDIR)$(pkgdatadir)/errorref.txt diff --git a/doc/Makefile.in b/doc/Makefile.in new file mode 100644 index 0000000..2bc27c3 --- /dev/null +++ b/doc/Makefile.in @@ -0,0 +1,1143 @@ +# Makefile.in generated by automake 1.14.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2013 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Makefile.am for libgpg-error documentation +# Copyright (C) 2014 g10 Code GmbH +# +# This file is part of libgpg-error. +# +# libgpg-error is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# libgpg-error is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this program; if not, see . + +VPATH = @srcdir@ +am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +bin_PROGRAMS = yat2m$(EXEEXT) +@CROSS_COMPILING_TRUE@@HAVE_YAT2M_FALSE@am__append_1 = yat2m-for-build +subdir = doc +DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(top_srcdir)/build-aux/depcomp $(gpgrt_TEXINFOS) \ + $(top_srcdir)/build-aux/mdate-sh $(srcdir)/version.texi \ + $(srcdir)/stamp-vti $(top_srcdir)/build-aux/texinfo.tex +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \ + $(top_srcdir)/m4/estream.m4 $(top_srcdir)/m4/gettext.m4 \ + $(top_srcdir)/m4/gnupg-misc.m4 $(top_srcdir)/m4/iconv.m4 \ + $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ + $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/lock.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ + $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ + $(top_srcdir)/m4/readline.m4 $(top_srcdir)/m4/threadlib.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" \ + "$(DESTDIR)$(man1dir)" +PROGRAMS = $(bin_PROGRAMS) +am_yat2m_OBJECTS = yat2m-yat2m.$(OBJEXT) +yat2m_OBJECTS = $(am_yat2m_OBJECTS) +yat2m_LDADD = $(LDADD) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +yat2m_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(yat2m_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(yat2m_SOURCES) +DIST_SOURCES = $(yat2m_SOURCES) +AM_V_DVIPS = $(am__v_DVIPS_@AM_V@) +am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@) +am__v_DVIPS_0 = @echo " DVIPS " $@; +am__v_DVIPS_1 = +AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@) +am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@) +am__v_MAKEINFO_0 = @echo " MAKEINFO" $@; +am__v_MAKEINFO_1 = +AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@) +am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@) +am__v_INFOHTML_0 = @echo " INFOHTML" $@; +am__v_INFOHTML_1 = +AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@) +am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@) +am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@; +am__v_TEXI2DVI_1 = +AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@) +am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@) +am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@; +am__v_TEXI2PDF_1 = +AM_V_texinfo = $(am__v_texinfo_@AM_V@) +am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@) +am__v_texinfo_0 = -q +am__v_texinfo_1 = +AM_V_texidevnull = $(am__v_texidevnull_@AM_V@) +am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@) +am__v_texidevnull_0 = > /dev/null +am__v_texidevnull_1 = +INFO_DEPS = $(srcdir)/gpgrt.info +TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex +am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux +DVIS = gpgrt.dvi +PDFS = gpgrt.pdf +PSS = gpgrt.ps +HTMLS = gpgrt.html +TEXINFOS = gpgrt.texi +TEXI2DVI = texi2dvi +TEXI2PDF = $(TEXI2DVI) --pdf --batch +MAKEINFOHTML = $(MAKEINFO) --html +AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) +DVIPS = dvips +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +man1dir = $(mandir)/man1 +NROFF = nroff +MANS = $(man_MANS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BUILD_FILEVERSION = @BUILD_FILEVERSION@ +BUILD_REVISION = @BUILD_REVISION@ +BUILD_TIMESTAMP = @BUILD_TIMESTAMP@ +BUILD_VERSION = @BUILD_VERSION@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CC_FOR_BUILD = @CC_FOR_BUILD@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GPG_ERROR_CONFIG_CFLAGS = @GPG_ERROR_CONFIG_CFLAGS@ +GPG_ERROR_CONFIG_HOST = @GPG_ERROR_CONFIG_HOST@ +GPG_ERROR_CONFIG_ISUBDIRAFTER = @GPG_ERROR_CONFIG_ISUBDIRAFTER@ +GPG_ERROR_CONFIG_LIBS = @GPG_ERROR_CONFIG_LIBS@ +GPG_ERROR_CONFIG_MT_CFLAGS = @GPG_ERROR_CONFIG_MT_CFLAGS@ +GPG_ERROR_CONFIG_MT_LIBS = @GPG_ERROR_CONFIG_MT_LIBS@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBGPG_ERROR_LT_AGE = @LIBGPG_ERROR_LT_AGE@ +LIBGPG_ERROR_LT_CURRENT = @LIBGPG_ERROR_LT_CURRENT@ +LIBGPG_ERROR_LT_REVISION = @LIBGPG_ERROR_LT_REVISION@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBMULTITHREAD = @LIBMULTITHREAD@ +LIBOBJS = @LIBOBJS@ +LIBREADLINE = @LIBREADLINE@ +LIBS = @LIBS@ +LIBTHREAD = @LIBTHREAD@ +LIBTOOL = @LIBTOOL@ +LIB_NETWORK = @LIB_NETWORK@ +LIB_SCHED_YIELD = @LIB_SCHED_YIELD@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBMULTITHREAD = @LTLIBMULTITHREAD@ +LTLIBOBJS = @LTLIBOBJS@ +LTLIBTHREAD = @LTLIBTHREAD@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +RC = @RC@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +VERSION_NUMBER = @VERSION_NUMBER@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +YAT2M = @YAT2M@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +EXTRA_DIST = HACKING errorref.txt +yat2m_SOURCES = yat2m.c +yat2m_CFLAGS = -DPACKAGE_VERSION="\"$(PACKAGE_VERSION)\"" +DISTCLEANFILES = gpgrt.cps yat2m-stamp.tmp yat2m-stamp $(myman_pages) +CLEANFILES = errorref.txt.x $(am__append_1) +info_TEXINFOS = gpgrt.texi +gpgrt_TEXINFOS = lgpl.texi gpl.texi +YAT2M_OPTIONS = -I $(srcdir) \ + --release "Libgpg-error @PACKAGE_VERSION@" --source "GnuPG" + +myman_sources = gpgrt.texi +myman_pages = gpg-error-config.1 +man_MANS = $(myman_pages) +@CROSS_COMPILING_FALSE@@HAVE_YAT2M_FALSE@YAT2M_CMD = ./yat2m +@CROSS_COMPILING_TRUE@@HAVE_YAT2M_FALSE@YAT2M_CMD = ./yat2m-for-build +@HAVE_YAT2M_TRUE@YAT2M_CMD = $(YAT2M) +@CROSS_COMPILING_FALSE@@HAVE_YAT2M_FALSE@YAT2M_DEP = yat2m +@CROSS_COMPILING_TRUE@@HAVE_YAT2M_FALSE@YAT2M_DEP = yat2m-for-build +@HAVE_YAT2M_TRUE@YAT2M_DEP = $(YAT2M) +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .dvi .html .info .lo .o .obj .pdf .ps .texi +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu doc/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p \ + || test -f $$p1 \ + ; then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' \ + -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' \ + `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +yat2m$(EXEEXT): $(yat2m_OBJECTS) $(yat2m_DEPENDENCIES) $(EXTRA_yat2m_DEPENDENCIES) + @rm -f yat2m$(EXEEXT) + $(AM_V_CCLD)$(yat2m_LINK) $(yat2m_OBJECTS) $(yat2m_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/yat2m-yat2m.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +yat2m-yat2m.o: yat2m.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(yat2m_CFLAGS) $(CFLAGS) -MT yat2m-yat2m.o -MD -MP -MF $(DEPDIR)/yat2m-yat2m.Tpo -c -o yat2m-yat2m.o `test -f 'yat2m.c' || echo '$(srcdir)/'`yat2m.c +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/yat2m-yat2m.Tpo $(DEPDIR)/yat2m-yat2m.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='yat2m.c' object='yat2m-yat2m.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(yat2m_CFLAGS) $(CFLAGS) -c -o yat2m-yat2m.o `test -f 'yat2m.c' || echo '$(srcdir)/'`yat2m.c + +yat2m-yat2m.obj: yat2m.c +@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(yat2m_CFLAGS) $(CFLAGS) -MT yat2m-yat2m.obj -MD -MP -MF $(DEPDIR)/yat2m-yat2m.Tpo -c -o yat2m-yat2m.obj `if test -f 'yat2m.c'; then $(CYGPATH_W) 'yat2m.c'; else $(CYGPATH_W) '$(srcdir)/yat2m.c'; fi` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/yat2m-yat2m.Tpo $(DEPDIR)/yat2m-yat2m.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='yat2m.c' object='yat2m-yat2m.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(yat2m_CFLAGS) $(CFLAGS) -c -o yat2m-yat2m.obj `if test -f 'yat2m.c'; then $(CYGPATH_W) 'yat2m.c'; else $(CYGPATH_W) '$(srcdir)/yat2m.c'; fi` + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +.texi.info: + $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \ + am__cwd=`pwd` && $(am__cd) $(srcdir) && \ + rm -rf $$backupdir && mkdir $$backupdir && \ + if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ + for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ + if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ + done; \ + else :; fi && \ + cd "$$am__cwd"; \ + if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ + -o $@ $<; \ + then \ + rc=0; \ + $(am__cd) $(srcdir); \ + else \ + rc=$$?; \ + $(am__cd) $(srcdir) && \ + $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ + fi; \ + rm -rf $$backupdir; exit $$rc + +.texi.dvi: + $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ + $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \ + $< + +.texi.pdf: + $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ + $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \ + $< + +.texi.html: + $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp) + $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ + -o $(@:.html=.htp) $<; \ + then \ + rm -rf $@ && mv $(@:.html=.htp) $@; \ + else \ + rm -rf $(@:.html=.htp); exit 1; \ + fi +$(srcdir)/gpgrt.info: gpgrt.texi $(srcdir)/version.texi $(gpgrt_TEXINFOS) +gpgrt.dvi: gpgrt.texi $(srcdir)/version.texi $(gpgrt_TEXINFOS) +gpgrt.pdf: gpgrt.texi $(srcdir)/version.texi $(gpgrt_TEXINFOS) +gpgrt.html: gpgrt.texi $(srcdir)/version.texi $(gpgrt_TEXINFOS) +$(srcdir)/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/stamp-vti +$(srcdir)/stamp-vti: gpgrt.texi $(top_srcdir)/configure + @(dir=.; test -f ./gpgrt.texi || dir=$(srcdir); \ + set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/gpgrt.texi`; \ + echo "@set UPDATED $$1 $$2 $$3"; \ + echo "@set UPDATED-MONTH $$2 $$3"; \ + echo "@set EDITION $(VERSION)"; \ + echo "@set VERSION $(VERSION)") > vti.tmp + @cmp -s vti.tmp $(srcdir)/version.texi \ + || (echo "Updating $(srcdir)/version.texi"; \ + cp vti.tmp $(srcdir)/version.texi) + -@rm -f vti.tmp + @cp $(srcdir)/version.texi $@ + +mostlyclean-vti: + -rm -f vti.tmp + +maintainer-clean-vti: +@MAINTAINER_MODE_TRUE@ -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi +.dvi.ps: + $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + $(DVIPS) $(AM_V_texinfo) -o $@ $< + +uninstall-dvi-am: + @$(NORMAL_UNINSTALL) + @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \ + rm -f "$(DESTDIR)$(dvidir)/$$f"; \ + done + +uninstall-html-am: + @$(NORMAL_UNINSTALL) + @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \ + rm -rf "$(DESTDIR)$(htmldir)/$$f"; \ + done + +uninstall-info-am: + @$(PRE_UNINSTALL) + @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \ + list='$(INFO_DEPS)'; \ + for file in $$list; do \ + relfile=`echo "$$file" | sed 's|^.*/||'`; \ + echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ + if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ + then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \ + done; \ + else :; fi + @$(NORMAL_UNINSTALL) + @list='$(INFO_DEPS)'; \ + for file in $$list; do \ + relfile=`echo "$$file" | sed 's|^.*/||'`; \ + relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ + (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \ + echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ + rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ + else :; fi); \ + done + +uninstall-pdf-am: + @$(NORMAL_UNINSTALL) + @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \ + rm -f "$(DESTDIR)$(pdfdir)/$$f"; \ + done + +uninstall-ps-am: + @$(NORMAL_UNINSTALL) + @list='$(PSS)'; test -n "$(psdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \ + rm -f "$(DESTDIR)$(psdir)/$$f"; \ + done + +dist-info: $(INFO_DEPS) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + list='$(INFO_DEPS)'; \ + for base in $$list; do \ + case $$base in \ + $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ + esac; \ + if test -f $$base; then d=.; else d=$(srcdir); fi; \ + base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \ + for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \ + if test -f $$file; then \ + relfile=`expr "$$file" : "$$d/\(.*\)"`; \ + test -f "$(distdir)/$$relfile" || \ + cp -p $$file "$(distdir)/$$relfile"; \ + else :; fi; \ + done; \ + done + +mostlyclean-aminfo: + -rm -rf gpgrt.t2d gpgrt.t2p + +clean-aminfo: + -test -z "gpgrt.dvi gpgrt.pdf gpgrt.ps gpgrt.html" \ + || rm -rf gpgrt.dvi gpgrt.pdf gpgrt.ps gpgrt.html + +maintainer-clean-aminfo: + @list='$(INFO_DEPS)'; for i in $$list; do \ + i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ + echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ + rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ + done +install-man1: $(man_MANS) + @$(NORMAL_INSTALL) + @list1=''; \ + list2='$(man_MANS)'; \ + test -n "$(man1dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.1[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list=''; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + sed -n '/\.1[a-z]*$$/p'; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-info +check-am: all-am +check: check-am +all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(MANS) +installdirs: + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-aminfo clean-binPROGRAMS clean-generic clean-libtool \ + mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: $(DVIS) + +html: html-am + +html-am: $(HTMLS) + +info: info-am + +info-am: $(INFO_DEPS) + +install-data-am: install-data-local install-info-am install-man + +install-dvi: install-dvi-am + +install-dvi-am: $(DVIS) + @$(NORMAL_INSTALL) + @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \ + done +install-exec-am: install-binPROGRAMS + +install-html: install-html-am + +install-html-am: $(HTMLS) + @$(NORMAL_INSTALL) + @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \ + $(am__strip_dir) \ + d2=$$d$$p; \ + if test -d "$$d2"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \ + $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ + echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \ + $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \ + else \ + list2="$$list2 $$d2"; \ + fi; \ + done; \ + test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \ + done; } +install-info: install-info-am + +install-info-am: $(INFO_DEPS) + @$(NORMAL_INSTALL) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \ + fi; \ + for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + esac; \ + if test -f $$file; then d=.; else d=$(srcdir); fi; \ + file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ + for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ + $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ + if test -f $$ifile; then \ + echo "$$ifile"; \ + else : ; fi; \ + done; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done + @$(POST_INSTALL) + @if $(am__can_run_installinfo); then \ + list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ + for file in $$list; do \ + relfile=`echo "$$file" | sed 's|^.*/||'`; \ + echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ + install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ + done; \ + else : ; fi +install-man: install-man1 + +install-pdf: install-pdf-am + +install-pdf-am: $(PDFS) + @$(NORMAL_INSTALL) + @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done +install-ps: install-ps-am + +install-ps-am: $(PSS) + @$(NORMAL_INSTALL) + @list='$(PSS)'; test -n "$(psdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-aminfo \ + maintainer-clean-generic maintainer-clean-vti + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool mostlyclean-vti + +pdf: pdf-am + +pdf-am: $(PDFS) + +ps: ps-am + +ps-am: $(PSS) + +uninstall-am: uninstall-binPROGRAMS uninstall-dvi-am uninstall-html-am \ + uninstall-info-am uninstall-local uninstall-man \ + uninstall-pdf-am uninstall-ps-am + +uninstall-man: uninstall-man1 + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-aminfo \ + clean-binPROGRAMS clean-generic clean-libtool cscopelist-am \ + ctags ctags-am dist-info distclean distclean-compile \ + distclean-generic distclean-libtool distclean-tags distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-binPROGRAMS install-data install-data-am \ + install-data-local install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-man1 install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-aminfo maintainer-clean-generic \ + maintainer-clean-vti mostlyclean mostlyclean-aminfo \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + mostlyclean-vti pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-binPROGRAMS uninstall-dvi-am \ + uninstall-html-am uninstall-info-am uninstall-local \ + uninstall-man uninstall-man1 uninstall-pdf-am uninstall-ps-am + + +@CROSS_COMPILING_TRUE@@HAVE_YAT2M_FALSE@yat2m-for-build: yat2m.c +@CROSS_COMPILING_TRUE@@HAVE_YAT2M_FALSE@ $(CC_FOR_BUILD) -o $@ $(srcdir)/yat2m.c + +yat2m-stamp: $(myman_sources) $(srcdir)/version.texi + @rm -f yat2m-stamp.tmp + @touch yat2m-stamp.tmp + for file in $(myman_sources) ; do \ + $(YAT2M_CMD) $(YAT2M_OPTIONS) --store \ + `test -f '$$file' || echo '$(srcdir)/'`$$file ; done + @mv -f yat2m-stamp.tmp $@ + +yat2m-stamp: $(YAT2M_DEP) + +$(myman_pages) : yat2m-stamp + @if test -f $@; then :; else \ + trap 'rm -rf yat2m-stamp yat2m-lock' 1 2 13 15; \ + if mkdir yat2m-lock 2>/dev/null; then \ + rm -f yat2m-stamp; \ + $(MAKE) $(AM_MAKEFLAGS) yat2m-stamp; \ + rmdir yat2m-lock; \ + else \ + while test -d yat2m-lock; do sleep 1; done; \ + test -f yat2m-stamp; exit $$?; \ + fi; \ + fi + +# Make sure that gpgrt.texi is touched if any other texi file has +# been modified. This is required so that the version.texi magic +# updates the release date. +gpgrt.texi : $(gpgrt_TEXINFOS) + touch $(srcdir)/gpgrt.texi + +errorref.txt.x : errorref.txt + sed '/^##/ d' $< >$@ + echo "# Installed by $(PACKAGE_NAME) $(PACKAGE_VERSION)" >>$@ + +install-data-local: errorref.txt.x + $(mkinstalldirs) $(DESTDIR)$(pkgdatadir) + $(INSTALL_DATA) errorref.txt.x $(DESTDIR)$(pkgdatadir)/errorref.txt + +uninstall-local: + -@rm $(DESTDIR)$(pkgdatadir)/errorref.txt + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/errorref.txt b/doc/errorref.txt new file mode 100644 index 0000000..284123b --- /dev/null +++ b/doc/errorref.txt @@ -0,0 +1,1122 @@ +# errorref.txt - Description of error codes +# Copyright (C) 2003-2004, 2010, 2013-2016 g10 Code GmbH +# +# This file is part of libgpg-error. +# +# libgpg-error is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public License +# as published by the Free Software Foundation; either version 2.1 of +# the License, or (at your option) any later version. +# +# libgpg-error is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public +# License along with this program; if not, see . +## +## Note that lines with a leading double hash will not installed. +## Please do not put any tabs into this file. +## +## find ~/s/{gnupg,libgpg-error,libksba,libgcrypt,gpgme,gpa} -type f \ +## -name '*.[ch]' -print0 | xargs -0 grep -n GPG_ERR_ + + +GPG_ERR_UNKNOWN_PACKET Unknown packet + + GNUPG: - Redefined to G10ERR_UNKNOWN_PACKET in gpg. + +GPG_ERR_UNKNOWN_VERSION Unknown version in packet + + Used by GnuPG 2.1 to identify valid OpenPGP packets with an + unknown version. + +GPG_ERR_PUBKEY_ALGO Invalid public key algorithm + + GNUPG: - Redefined to G10ERR_PUBKEY_ALGO in gpg. + - Public key algorithm is not allowed by OpenPGP. + GCRYPT: - Public key algorithm is not defined or not available. + Note that this is also the case if the algorithm has + been disabled. + - [version < 1.5] Checking of the RSA secret key failed + (consistency check). + +GPG_ERR_DIGEST_ALGO Invalid digest algorithm + + GNUPG: - Digest algorithm is not supported. + - Redefined to G10ERR_PUBKEY_ALGO in gpg. + - Digest algorithm is not allowed by OpenPGP. + - Unsupported algorithm given to "--hash=" option of + certain Assuan server commands. + - Signature creation or verification failed due to + an unsupported hash algorithm. + GCRYPT: - Digest key algorithm is not defined or not available. + Note that this is also the case if the algorithm has + been disabled. + - Unsupported digest algorithm in a selftest. + - Invalid digest algorithm used in FIPS mode. Note that + in enforced-FIPS mode there is no such error return. + - Message digested or HMAC computation finished with no + message algorithm enabled for the hash context. + - Bad digest algorithm given to public key function. + +GPG_ERR_BAD_PUBKEY Bad public key + + GNUPG: - Redefined to G10ERR_BAD_PUBKEY in gpg. + - Missing public or domain parameter in an s-expression. + If the curve name is mssing GPG_ERR_INV_CURVE may be + used as well. + +GPG_ERR_BAD_SECKEY Bad secret key + + GNUPG: - Invalid format of a S-expression encoded private key in + gpg-agent. + - Missing secret parameter in an s-expression. + - A protected or shadowed private key was passed to the + OpenPGP card application for storing it on the card. + - A private key passed to the OpenPGP card application does + not match the requirements of the card or misses required + parameters. + - Gpg'agents import key command is not able to convert + the key to the internal format. + GCRYPT: - Checking the secret key failed (consistency check). + + +GPG_ERR_BAD_SIGNATURE Bad signature + + GNUPG: - Redefined to G10ERR_BAD_SIGN in gpg. + - The MDC check of an OpenPGP encrypted message failed. + - A OpenPGP key signature did not verify. + - A signature with a key flagged as "never trust" was made. + GCRYPT: - A public key signature did not verify. + +GPG_ERR_NO_PUBKEY No public key + + GNUPG: - Redefined to G10ERR_NO_PUBKEY in gpg. + - A key was requested from an OpenPGP card but the key is + not stored on the card. + - The public key could not be retrieved from a corresponding + certificate on a card (command READKEY in scd). + - A requested certificate was not found or an unspecified + error occurred while selecting a X.509 certificate in + gpgsm. + - The specified certificate or key was not found. This + does not necessary mean that the certifciate is not + available but the specification method may not be usable + for the given certificate. May also happen for + certificates somewhere in the chain while validaiting a + certificate chain. + - The requested encryption certificate was not found. + - A certificate specified in a CMS message is not + available and thus the signature could not be verified + or details of the certificate be shown. + GPA: - No key was given for encryption. + - The selected encryption protocol is not available. + +GPG_ERR_CHECKSUM Checksum error + + GNUPG: - The checksum of an unprotected OpenPGP secret key packet + is wrong. + GCRYPT: - Decryption in AESWRAP mode does not match the expected IV. + [more to come] + +GPG_ERR_BAD_PASSPHRASE Bad passphrase + + GNUPG: - The entered passphrase does not verify + +GPG_ERR_CIPHER_ALGO Invalid cipher algorithm + +GPG_ERR_KEYRING_OPEN Cannot open keyring + +GPG_ERR_INV_PACKET Invalid packet + +GPG_ERR_INV_ARMOR Invalid armor + +GPG_ERR_NO_USER_ID No user ID + +GPG_ERR_NO_SECKEY No secret key + + NTBTLS: - No private key or pre-shared key available. + +GPG_ERR_WRONG_SECKEY Wrong secret key used + +GPG_ERR_BAD_KEY Bad session key + + GNUPG: - gpg-agent's command IMPORT_KEY or EXPORT_KEY is used + without a prior KEYWRAP_KEY command. + + [more to come] + + +GPG_ERR_COMPR_ALGO Unknown compression algorithm + +GPG_ERR_NO_PRIME Number is not prime + +GPG_ERR_NO_ENCODING_METHOD Invalid encoding method + +GPG_ERR_NO_ENCRYPTION_SCHEME Invalid encryption scheme + +GPG_ERR_NO_SIGNATURE_SCHEME Invalid signature scheme + +GPG_ERR_INV_ATTR Invalid attribute + + +GPG_ERR_NO_VALUE No value + + GNUPG: - A timestamp value is expect but there is none. + KSBA: - A timestamp value is expect but there is none. + - A certificate is missing a required property. + - A CMS object is missing a required property. + - Converting a Distinguised Name to an RFC2253 string failed. + + +GPG_ERR_NOT_FOUND Not found + + A search operation did not return a matching value. + + +GPG_ERR_VALUE_NOT_FOUND Value not found + + GNUPG: - A keyblock or a cert object was requested but not + found. This might indicate an internal error here. + + +GPG_ERR_SYNTAX Syntax error + +GPG_ERR_BAD_MPI Bad MPI value + +GPG_ERR_INV_PASSPHRASE Invalid passphrase + + GNUPG: - Required constraints of the passphrase are not met. + +GPG_ERR_SIG_CLASS Invalid signature class + +GPG_ERR_RESOURCE_LIMIT Resources exhausted + +GPG_ERR_INV_KEYRING Invalid keyring + +GPG_ERR_TRUSTDB Trust DB error + + +GPG_ERR_BAD_CERT Bad certificate + + NTBTLS: - No subject found in the certifciate. + + +GPG_ERR_INV_USER_ID Invalid user ID + + GNUPG: - Used to indicate a bad specification of a user id. + [more to come] + + +GPG_ERR_UNEXPECTED Unexpected error + +GPG_ERR_TIME_CONFLICT Time conflict + +GPG_ERR_KEYSERVER Keyserver error + + +GPG_ERR_WRONG_PUBKEY_ALGO Wrong public key algorithm + + GNUPG: - The algorithm is not expected. For example a DSA + algorithm is used where a non-DSA algorithm is expected + or vice versa. May indicate an internal error. + NTBTLS: - Public key type mismatch. The peer presented a + different key type than requested. + + +GPG_ERR_TRIBUTE_TO_D_A Tribute to D. A. + +GPG_ERR_WEAK_KEY Weak encryption key + +GPG_ERR_INV_KEYLEN Invalid key length + +GPG_ERR_INV_ARG Invalid argument + + GCRYPT: - Unsupported length of input data in encrypt or decrypt + cipher functions. For example not matching the block + lengths of the algorithm. + - Incompatible args given; e.g. two or none if exactly one + is required. + [more to come] + + +GPG_ERR_BAD_URI Syntax error in URI + +GPG_ERR_INV_URI Invalid URI + +GPG_ERR_NETWORK Network error + +GPG_ERR_UNKNOWN_HOST Unknown host + + Used instead of the non-portable EHOSTNOTFOUND which is + returned by some systems as a mapping of h_errno's + HOST_NOT_FOUND + + +GPG_ERR_SELFTEST_FAILED Selftest failed + +GPG_ERR_NOT_ENCRYPTED Data not encrypted + +GPG_ERR_NOT_PROCESSED Data not processed + +GPG_ERR_UNUSABLE_PUBKEY Unusable public key + +GPG_ERR_UNUSABLE_SECKEY Unusable secret key + +GPG_ERR_INV_VALUE Invalid value + + NTBTLS: - A DH parameter is out of range + + +GPG_ERR_BAD_CERT_CHAIN Bad certificate chain + +GPG_ERR_MISSING_CERT Missing certificate + + NTBTLS: - The server needs to send a certifciate but none has been + set. See also GPG_ERR_MISSING_ISSUER_CERT and + GPG_ERR_MISSING_CLIENT_CERT. + + + +GPG_ERR_NO_DATA No data + +GPG_ERR_BUG Bug + +GPG_ERR_NOT_SUPPORTED Not supported + + Used if a feature is currently not supported but may be + enabled for example using a program option. Commonly used if + a feature has been disabled by an administrator. See also + GPG_ERR_NOT_ENABLED. Sometimes also used for features which + are not yet supported. + + +GPG_ERR_INV_OP Invalid operation code + +GPG_ERR_TIMEOUT Timeout + + Some function or network access timed out. + +GPG_ERR_INTERNAL Internal error + +GPG_ERR_EOF_GCRYPT EOF (gcrypt) + +GPG_ERR_INV_OBJ Invalid object + +GPG_ERR_TOO_SHORT Provided object is too short + +GPG_ERR_TOO_LARGE Provided object is too large + +GPG_ERR_NO_OBJ Missing item in object + +GPG_ERR_NOT_IMPLEMENTED Not implemented + + NTBTLS: - The requested feature is not implemented. + +GPG_ERR_CONFLICT Conflicting use + + NTBTLS: - Function has already been called and may not be called + again at this protocol state. + GNUPG: - Returned by g13 when creating a new container on a device + which seems to be in use. + + +GPG_ERR_INV_CIPHER_MODE Invalid cipher mode + +GPG_ERR_INV_FLAG Invalid flag + + GPGME: Used to indicate an invalid combination of flags. + + +GPG_ERR_INV_HANDLE Invalid handle + +GPG_ERR_TRUNCATED Result truncated + +GPG_ERR_INCOMPLETE_LINE Incomplete line + +GPG_ERR_INV_RESPONSE Invalid response + +GPG_ERR_NO_AGENT No agent running + +GPG_ERR_AGENT agent error + +GPG_ERR_INV_DATA Invalid data + + GNUPG: - Used in app-openpgp.c for a badly formatted request. + GCRYPT: - No passphrase given for gcry_kdf_derive. + - An opaque MPI is given to a public key function but not + expected. + +GPG_ERR_ASSUAN_SERVER_FAULT Unspecific Assuan server fault + +GPG_ERR_ASSUAN General Assuan error + + GNUPG: - Used by Assuan command handler if they fail to do basic + things like an es_fdopen or es_fopencookie. + + +GPG_ERR_INV_SESSION_KEY Invalid session key + +GPG_ERR_INV_SEXP Invalid S-expression + +GPG_ERR_UNSUPPORTED_ALGORITHM Unsupported algorithm + +GPG_ERR_NO_PIN_ENTRY No pinentry + +GPG_ERR_PIN_ENTRY pinentry error + +GPG_ERR_BAD_PIN Bad PIN + +GPG_ERR_INV_NAME Invalid name + + GNUPG: - Formerly used in GPGSM to indicate an error in + the specification of a user id. Later replaced by + GPG_ERR_INV_USER_ID. + - In G13 to indicate a bad file name (e.g. one with + an embedded Nul byte when given as escaped string. + - In SCDAEMON for an unknown attribute name. + + Also used for URLs which have non-acceptable characters for the + specific application. + + [more to come] + +GPG_ERR_BAD_DATA Bad data + +GPG_ERR_INV_PARAMETER Invalid parameter + + GNUPG: - Returned if gpg-agent sends a new generated key with + unknown parameter names. + - Invalid parameter in the parameter file for key + generation by gpgsm. + +GPG_ERR_WRONG_CARD Wrong card + +GPG_ERR_NO_DIRMNGR No dirmngr + +GPG_ERR_DIRMNGR dirmngr error + +GPG_ERR_CERT_REVOKED Certificate revoked + +GPG_ERR_NO_CRL_KNOWN No CRL known + +GPG_ERR_CRL_TOO_OLD CRL too old + +GPG_ERR_LINE_TOO_LONG Line too long + +GPG_ERR_NOT_TRUSTED Not trusted + +GPG_ERR_CANCELED Operation cancelled + +GPG_ERR_BAD_CA_CERT Bad CA certificate + +GPG_ERR_CERT_EXPIRED Certificate expired + +GPG_ERR_CERT_TOO_YOUNG Certificate too young + +GPG_ERR_UNSUPPORTED_CERT Unsupported certificate + +GPG_ERR_UNKNOWN_SEXP Unknown S-expression + +GPG_ERR_UNSUPPORTED_PROTECTION Unsupported protection + +GPG_ERR_CORRUPTED_PROTECTION Corrupted protection + +GPG_ERR_AMBIGUOUS_NAME Ambiguous name + +GPG_ERR_CARD Card error + +GPG_ERR_CARD_RESET Card reset required + +GPG_ERR_CARD_REMOVED Card removed + +GPG_ERR_INV_CARD Invalid card + +GPG_ERR_CARD_NOT_PRESENT Card not present + +GPG_ERR_NO_PKCS15_APP No PKCS15 application + +GPG_ERR_NOT_CONFIRMED Not confirmed + +GPG_ERR_CONFIGURATION Configuration error + +GPG_ERR_NO_POLICY_MATCH No policy match + +GPG_ERR_INV_INDEX Invalid index + +GPG_ERR_INV_ID Invalid ID + +GPG_ERR_NO_SCDAEMON No SmartCard daemon + +GPG_ERR_SCDAEMON SmartCard daemon error + +GPG_ERR_UNSUPPORTED_PROTOCOL Unsupported protocol + + GPG: - An unsupported keyserver protocol. + GPG_AGENT: - Invalid shadow_info protocol (not "t1-v1") + LIBKSBA: - Unknown OID of the OCSP response bytes + GPGME: - GPGME_PROTOCOL_xxx not supported. + NTBTLS: - Handshake protocol version not supported. + +GPG_ERR_BAD_PIN_METHOD Bad PIN method + +GPG_ERR_CARD_NOT_INITIALIZED Card not initialized + + SCDAEMON: - A card function is called but the card has not yet + been initialized. This may be due to a conflict with + another card using connection or due to a bug. + +GPG_ERR_UNSUPPORTED_OPERATION Unsupported operation + +GPG_ERR_WRONG_KEY_USAGE Wrong key usage + + GNUPG: - Key usage not possible with selected algorithm. + +GPG_ERR_NOTHING_FOUND Nothing found + + Indicates that the operation was not possible because nothing has + been found. For example an update request for non existent data. + +GPG_ERR_WRONG_BLOB_TYPE Wrong blob type + +GPG_ERR_MISSING_VALUE Missing value + + GNUPG: - Not enough parameters for a secret key send to gpg-agent. + + GCRYPT: - A required parameter has not been given. + + +GPG_ERR_HARDWARE Hardware problem + +GPG_ERR_PIN_BLOCKED PIN blocked + +GPG_ERR_USE_CONDITIONS Conditions of use not satisfied + +GPG_ERR_PIN_NOT_SYNCED PINs are not synced + +GPG_ERR_INV_CRL Invalid CRL + +GPG_ERR_BAD_BER BER error + +GPG_ERR_INV_BER Invalid BER + +GPG_ERR_ELEMENT_NOT_FOUND Element not found + +GPG_ERR_IDENTIFIER_NOT_FOUND Identifier not found + +GPG_ERR_INV_TAG Invalid tag + +GPG_ERR_INV_LENGTH Invalid length + + GCRYPT: - Bad block length for certain cipher algorithms and + modes. + - Bad length of input data; e.g. not a multiple of the + block length. + - A length does not match the size of the digest + algorithm. + - Length of signature or public key is not as expected + (e.g. in EdDSA). + [more to come] + GNUPG: - Invalid hash length for a pubkey + [more to come] + +GPG_ERR_INV_KEYINFO Invalid key info + + KSBA: - Returned if the ASN.1 Keyinfo structure is not valid + +GPG_ERR_UNEXPECTED_TAG Unexpected tag + +GPG_ERR_NOT_DER_ENCODED Not DER encoded + +GPG_ERR_NO_CMS_OBJ No CMS object + +GPG_ERR_INV_CMS_OBJ Invalid CMS object + +GPG_ERR_UNKNOWN_CMS_OBJ Unknown CMS object + +GPG_ERR_UNSUPPORTED_CMS_OBJ Unsupported CMS object + +GPG_ERR_UNSUPPORTED_ENCODING Unsupported encoding + + GNUPG: - Returned by Dirmngr if a keyserver returns a HTML document. + + +GPG_ERR_UNSUPPORTED_CMS_VERSION Unsupported CMS version + + +GPG_ERR_UNKNOWN_ALGORITHM Unknown algorithm + + GCRYPT: gcry_kdf_proc for an unknown kdf algorithm + +GPG_ERR_INV_ENGINE Invalid crypto engine + + GPGME: Several uses use cases. For example: + - Unexpected format of a status line. + +GPG_ERR_PUBKEY_NOT_TRUSTED Public key not trusted +GPG_ERR_DECRYPT_FAILED Decryption failed +GPG_ERR_KEY_EXPIRED Key expired +GPG_ERR_SIG_EXPIRED Signature expired +GPG_ERR_ENCODING_PROBLEM Encoding problem + +GPG_ERR_INV_STATE Invalid state + + The state (of a protocol) is not possible or not defined at all. + + NTBTLS: - Data received in an unexpected state. + - A function is called while not being in the right state. + + +GPG_ERR_DUP_VALUE Duplicated value + +GPG_ERR_MISSING_ACTION Missing action + + GNUPG: - In G13 the server command "MOUNT" is used without prior + use of the command "OPEN". + + others: - The libassuan ce-server test program uses this to + indicate that the client did not connect to the server + as requested. + +GPG_ERR_MODULE_NOT_FOUND ASN.1 module not found + +GPG_ERR_INV_OID_STRING Invalid OID string + +GPG_ERR_INV_TIME Invalid time + +GPG_ERR_INV_CRL_OBJ Invalid CRL object + +GPG_ERR_UNSUPPORTED_CRL_VERSION Unsupported CRL version + + +GPG_ERR_INV_CERT_OBJ Invalid certificate object + + GPGME: - A bad certificate (gpgme_key_t) has been passed to a + function. For example it might be incomplete due to a + missing fingerprint. + + +GPG_ERR_UNKNOWN_NAME Unknown name + + Used by GPG to indicate an unknown ECC curve name (may also + indicate missing ECC support). It is also used to indicate an + unsuported parameter name in functions which take a name and + value to update state. Note that GPG_ERR_UNKNOWN_CURVE is + used instead by newer code. + +GPG_ERR_LOCALE_PROBLEM A locale function failed + +GPG_ERR_NOT_LOCKED Not locked + +GPG_ERR_PROTOCOL_VIOLATION Protocol violation + + GNUPG: - Used for invalid HTTP responses. + + +GPG_ERR_INV_MAC Invalid MAC + + The length, algo, or other properties of a MAC are not met. + See also GPG_ERR_BAD_MAC. + + +GPG_ERR_INV_REQUEST Invalid request + +GPG_ERR_UNKNOWN_EXTN Unknown extension + +GPG_ERR_UNKNOWN_CRIT_EXTN Unknown critical extension + +GPG_ERR_LOCKED Locked + +GPG_ERR_UNKNOWN_OPTION Unknown option + +GPG_ERR_UNKNOWN_COMMAND Unknown command + +GPG_ERR_NOT_OPERATIONAL Not operational + +GPG_ERR_NO_PASSPHRASE No passphrase given + +GPG_ERR_NO_PIN No PIN given + +GPG_ERR_NOT_ENABLED Not enabled + + Similar to GPG_ERR_NOT_SUPPORTED. In general this error is + used for disabled features which can be expected to be enabled + by the user. + + +GPG_ERR_NO_ENGINE No crypto engine + +GPG_ERR_MISSING_KEY Missing key + + GNUPG: - gpg-agent returns this error on import or export if a key + wrapping transport key has not been specified. + - It is used when the name "Key" is not found while looking + up name value pairs of the extended private key format + + GCRYPT: - A key has not been set when calling a symmetric + encryption function. + +GPG_ERR_TOO_MANY Too many objects + + GPG: - Dirmngr KS_GET called with too many pattern so that the + maximum Assuan line length would overflow. + - gpgsm's command export --secret called with too man keys. + GPGME: - To many patterns in gpgme-tools's KEYLIST command. + +GPG_ERR_LIMIT_REACHED Limit reached + + A programmed limit has been reached. + + GnuPG: gpgtar: Extract directory can't be created because too + many of directories with a similar name are already existing. + +GPG_ERR_NOT_INITIALIZED Not initialized + + An operation can't be performed because something has not been + initialized. This might be a missing initialization of an entire + subsystems or a prerequisite for using a function is not + fulfilled. + +GPG_ERR_MISSING_ISSUER_CERT Missing issuer certificate + +GPG_ERR_NO_KEYSERVER No keyserver available + + No keyserver configured or no keyserver available due to + missing support for the requested protocol. Found in Dirmngr. + +GPG_ERR_INV_CURVE Invalid elliptic curve + + The curve parameter is missing or the curve is invalid; for + example it is not possible to get affine coordinates for the + public key. + +GPG_ERR_UNKNOWN_CURVE Unknown elliptic curve + + The curve is not known or not supported by the protocol. + + +GPG_ERR_DUP_KEY Duplicated key + + A duplicated key was detected. For example a unique key in a + database occurred more than once. Also used if in a protocol + an expected key was returned more than once. + +GPG_ERR_AMBIGUOUS Ambiguous search + + A search etc returned an ambigious result. This usually means + that the search string was not specific enough. + +GPG_ERR_NO_CRYPT_CTX No crypto context + + A crypto context was expected but not given. Commonly used by + Libgcrypt. + +GPG_ERR_WRONG_CRYPT_CTX Wrong crypto context + + The given crypto context does not match the requirements. For + example in Libgcrypt a crypto context has private data + pertaining to certain algorithms. This error is for example + returned if a crypto context initialized for a different + algorithm is used. + +GPG_ERR_BAD_CRYPT_CTX Bad crypto context + + The is a problem with the crypto context. For example it has + not been properly initialized. + +GPG_ERR_CRYPT_CTX_CONFLICT Conflict in the crypto context + + Conflicting use of a crypto context. For example if a context + is used with objects that don't match the state of the + context. + +GPG_ERR_BROKEN_PUBKEY Broken public key + + The public key was mathematically not correctly generated. + (It would have been nicer if we would have used BAD_PUBKEY for + this, but that error code is in long time use to describe for + example policy and encoding problems with a key. Using + INV_PUBKEY would have been better for these purposes) + +GPG_ERR_BROKEN_SECKEY Broken secret key + + The secret key was mathematically not correctly generated. + +GPG_ERR_MAC_ALGO + + GCRYPT: - MAC key algorithm is not defined or not available. + + +GPG_ERR_FULLY_CANCELED Operation fully cancelled + +GPG_ERR_UNFINISHED Operation not yet finished + +GPG_ERR_BUFFER_TOO_SHORT Buffer too short + +GPG_ERR_SEXP_INV_LEN_SPEC Invalid length specifier in S-expression + +GPG_ERR_SEXP_STRING_TOO_LONG String too long in S-expression + +GPG_ERR_SEXP_UNMATCHED_PAREN Unmatched parentheses in S-expression + +GPG_ERR_SEXP_NOT_CANONICAL S-expression not canonical + +GPG_ERR_SEXP_BAD_CHARACTER Bad character in S-expression + +GPG_ERR_SEXP_BAD_QUOTATION Bad quotation in S-expression + +GPG_ERR_SEXP_ZERO_PREFIX Zero prefix in S-expression + +GPG_ERR_SEXP_NESTED_DH Nested display hints in S-expression + +GPG_ERR_SEXP_UNMATCHED_DH Unmatched display hints + +GPG_ERR_SEXP_UNEXPECTED_PUNC Unexpected reserved punctuation in S-expression + +GPG_ERR_SEXP_BAD_HEX_CHAR Bad hexadecimal character in S-expression + +GPG_ERR_SEXP_ODD_HEX_NUMBERS Odd hexadecimal numbers in S-expression + +GPG_ERR_SEXP_BAD_OCT_CHAR Bad octal character in S-expression + +GPG_ERR_SUBKEYS_EXP_REV All subkeys are expired or revoked + +GPG_ERR_DB_CORRUPTED Database is corrupted + +GPG_ERR_SERVER_FAILED Server indicated a failure + +GPG_ERR_NO_NAME No name + + EAI_NONAME may be mapped to this code. + +GPG_ERR_NO_KEY No key + + Some kind of key was not found. + +GPG_ERR_LEGACY_KEY Legacy key + + Used by GnuPG to identify version 2 and 3 OpenPGP key packets. + +GPG_ERR_REQUEST_TOO_SHORT Request too short + + A received request is too short to continue processing. + +GPG_ERR_REQUEST_TOO_LONG Request too long + + A received request is too long to continue processing. This may + be due to an internal limitation, a protocol violation, or due to + the use of a newer version of a protocol. + +GPG_ERR_OBJ_TERM_STATE Object is in termination state + + For cards this is the ISO status word 0x6285 (file is in + termination state). + +GPG_ERR_NO_CERT_CHAIN No certificate chain + + NTBTLS: - A CA chain has not been set but is required. + +GPG_ERR_CERT_TOO_LARGE Certificate is too large + + NTBTLS: - A certificate is too large to be used by the protocol. + +GPG_ERR_INV_RECORD Invalid record + + NTBTLS: - An invalid record was received + +GPG_ERR_BAD_MAC The MAC does not verify + + NTBTLS: - MAC verification of the message failed. + +GPG_ERR_UNEXPECTED_MSG Unexpected message + + GNUPG: - An unexpected WKS message was received. + NTBTLS: - Unexpected message received. + +GPG_ERR_COMPR_FAILED Compression or decompression failed + + NTBTLS: - As the description says. + +GPG_ERR_WOULD_WRAP A counter would wrap + + NTBTLS: - Too many messages exchanged + Other: - A counter would wrap. + +GPG_ERR_FATAL_ALERT Fatal alert message received + + NTBTLS: - Fatal alert message received from the peer. + +GPG_ERR_NO_CIPHER No cipher algorithm + + NTBTLS: - Server and client have no algo in common + +GPG_ERR_MISSING_CLIENT_CERT Missing client certificate + + NTBTLS: - No certificate received from client. + +GPG_ERR_CLOSE_NOTIFY Close notification received + + NTBTLS: - Alert with a close notification received + +GPG_ERR_TICKET_EXPIRED Ticket expired + + NTBTLS: - Session ticket has expired. + +GPG_ERR_BAD_TICKET Bad ticket + + NTBTLS: - Bad new session ticket message. + +GPG_ERR_UNKNOWN_IDENTITY Unknown identity + + NTBTLS: - Unknown PSK identify received + +GPG_ERR_BAD_HS_CERT Bad certificate message in handshake + + NTBTLS: - As the description says. + +GPG_ERR_BAD_HS_CERT_REQ Bad certificate request message in handshake + + NTBTLS: - As the description says. + +GPG_ERR_BAD_HS_CERT_VER Bad certificate verify message in handshake + + NTBTLS: - As the description says. + +GPG_ERR_BAD_HS_CHANGE_CIPHER Bad change cipher message in handshake + + NTBTLS: - As the description says. + +GPG_ERR_BAD_HS_CLIENT_HELLO Bad client hello message in handshake + + NTBTLS: - As the description says. + +GPG_ERR_BAD_HS_SERVER_HELLO Bad server hello message in handshake + + NTBTLS: - As the description says. + +GPG_ERR_BAD_HS_SERVER_HELLO_DONE Bad server hello done message in handshake + + NTBTLS: - As the description says. + +GPG_ERR_BAD_HS_FINISHED Bad finished message in handshake + + NTBTLS: - As the description says. + +GPG_ERR_BAD_HS_SERVER_KEX Bad server key exchange message in handshake + + NTBTLS: - As the description says. + +GPG_ERR_BAD_HS_CLIENT_KEX Bad client key exchange message in handshake + + NTBTLS: - As the description says. + + +GPG_ERR_BOGUS_STRING Bogus string + + Used if a protocol sends length prefixed strings which contain a + Nul byte and further processing would discard the rest of the + string. May also be used if a string contains unexpected and + possible dangerous characters (e.g. control characters in a domain + name). + +GPG_ERR_FORBIDDEN Forbidden + + The use of a features is not allowed due to insufficient rights. + Use by gpg-agent as an error codes for restricted commands. + +GPG_ERR_KEY_DISABLED Key disabled + + GNUPG: - The key has been disabled by the user. + +GPG_ERR_KEY_ON_CARD Not possible with a card based key + + GNUPG: - The gpg-agent returns this if a DELETE_KEY commands is + used for a smartcard based key. + +GPG_ERR_INV_LOCK_OBJ Invalid lock object + + GPGRT: - The provided lock object is not valid. This indicates an + internal problem in libgpg-error or more likely a + programming error. + +GPG_ERR_TRUE True + + Used to return the boolean value True. Note that GPG_ERR_NO_ERROR + (with the value 0) is also often used to indicate the value true. + +GPG_ERR_FALSE False + + Used to return the boolean value False. + + +GPG_ERR_ASS_GENERAL General IPC error + +GPG_ERR_ASS_ACCEPT_FAILED IPC accept call failed + +GPG_ERR_ASS_CONNECT_FAILED IPC connect call failed + +GPG_ERR_ASS_INV_RESPONSE Invalid IPC response + +GPG_ERR_ASS_INV_VALUE Invalid value passed to IPC + +GPG_ERR_ASS_INCOMPLETE_LINE Incomplete line passed to IPC + +GPG_ERR_ASS_LINE_TOO_LONG Line passed to IPC too long + +GPG_ERR_ASS_NESTED_COMMANDS Nested IPC commands + +GPG_ERR_ASS_NO_DATA_CB No data callback in IPC + +GPG_ERR_ASS_NO_INQUIRE_CB No inquire callback in IPC + +GPG_ERR_ASS_NOT_A_SERVER Not an IPC server + +GPG_ERR_ASS_NOT_A_CLIENT Not an IPC client + +GPG_ERR_ASS_SERVER_START Problem starting IPC server + +GPG_ERR_ASS_READ_ERROR IPC read error + +GPG_ERR_ASS_WRITE_ERROR IPC write error + +GPG_ERR_ASS_TOO_MUCH_DATA Too much data for IPC layer + +GPG_ERR_ASS_UNEXPECTED_CMD Unexpected IPC command + +GPG_ERR_ASS_UNKNOWN_CMD Unknown IPC command + +GPG_ERR_ASS_SYNTAX IPC syntax error + +GPG_ERR_ASS_CANCELED IPC call has been cancelled + +GPG_ERR_ASS_NO_INPUT No input source for IPC + +GPG_ERR_ASS_NO_OUTPUT No output source for IPC + +GPG_ERR_ASS_PARAMETER IPC parameter error + +GPG_ERR_ASS_UNKNOWN_INQUIRE Unknown IPC inquire + +GPG_ERR_ENGINE_TOO_OLD Crypto engine too old + +GPG_ERR_WINDOW_TOO_SMALL Screen or window too small + + Pinentry: - The size of the screen is too small. + +GPG_ERR_WINDOW_TOO_LARGE Screen or window too large + +GPG_ERR_MISSING_ENVVAR Required environment variable not set + + Pinentry: - The size of the screen can't be determined. + +GPG_ERR_USER_ID_EXISTS User ID already exists + + GNUPG: - Existing user ID in --quick-gen-key. + +GPG_ERR_NAME_EXISTS Name already exists + +GPG_ERR_DUP_NAME Duplicated name + +GPG_ERR_TOO_YOUNG Objects is too young + + For example used if a file is younger than expected. + +GPG_ERR_TOO_OLD Objects is too old + + Used if an object is too old to be used. This is a more generic + code than GPG_ERR_ENGINE_TOO_OLD or GPG_ERR_CRL_TOO_OLD. + +GPG_ERR_UNKNOWN_FLAG Unknown flag + + The flag is not known. + + GNUPG: - The flag part of the string given to the + option --default-new-key-algo value is not known. + +GPG_ERR_INV_ORDER Invalid execution order + + GNUPG: - In Dirmngr used for the libdns error code DNS_EORDER. + +GPG_ERR_ALREADY_FETCHED Already fetched + + GNUPG: - In Dirmngr used for the libdns error code DNS_EFETCHED. + +GPG_ERR_TRY_LATER Try again later + + This indicates that a server asked to try again later; thus it is + different from EAGAIN which is used by the local system. This + code is for example used instead of h_error's TRY_AGAIN. + +GPG_ERR_WRONG_NAME Wrong name + + NTBTLS: - Hostname does not match the certificate + +GPG_ERR_SYSTEM_BUG System bug detected + + The underlying operating system misbehaved. For example it wrote + more to a buffer than the told maximum size. + + +GPG_ERR_DNS_UNKNOWN Unknown DNS error + + Used by Dirmngr for DNS errors from libdns (DNS_EUNKNOWN); + +GPG_ERR_DNS_SECTION Invalid DNS section + + Used by Dirmngr for DNS errors from libdns (DNS_ESECTION); + +GPG_ERR_DNS_ADDRESS Invalid textual address form + + Used by Dirmngr for DNS errors from libdns (DNS_EADDRESS); + +GPG_ERR_DNS_NO_QUERY Missing DNS query packet + + Used by Dirmngr for DNS errors from libdns (DNS_ENOQUERY); + +GPG_ERR_DNS_NO_ANSWER Missing DNS answer packet + + Used by Dirmngr for DNS errors from libdns (DNS_ENOANSWER); + +GPG_ERR_DNS_CLOSED Connection closed in DNS + + Used by Dirmngr for DNS errors from libdns (DNS_ECONNFIN); + +GPG_ERR_DNS_VERIFY Verification failed in DNS + + Used by Dirmngr for DNS errors from libdns (DNS_EVERIFY); + +GPG_ERR_DNS_TIMEOUT DNS Timeout + + A DNS query timed out + +GPG_ERR_LDAP_GENERAL LDAP General error + + Catch all error for LDAP. Use when an error code could not be + mapped to a gpg-error code. + +GPG_ERR_LDAP_ATTR_GENERAL LDAP General attribute error +GPG_ERR_LDAP_NAME_GENERAL LDAP General name error +GPG_ERR_LDAP_SECURITY_GENERAL LDAP General security error +GPG_ERR_LDAP_SERVICE_GENERAL LDAP General service error +GPG_ERR_LDAP_UPDATE_GENERAL LDAP General update error +GPG_ERR_LDAP_E_GENERAL LDAP Experimental error code +GPG_ERR_LDAP_X_GENERAL LDAP Private error code +GPG_ERR_LDAP_OTHER_GENERAL LDAP Other general error + + The 8 GPG_ERR_LDAP_*_GENERAL error codes may be used to map ranges + of LDAP errors to one specific code. OpenLDAP uses LDAP_xxx_RANGE(n) + macros for that mapping. "Other general error" may be used similar + to "General error" for mapping of ranges. Here are macros from + OpenLDAP for reference: + + #define LDAP_ATTR_ERROR(n) LDAP_RANGE((n),0x10,0x15) /* 16-21 */ + #define LDAP_NAME_ERROR(n) LDAP_RANGE((n),0x20,0x24) /* 32-34,36 */ + #define LDAP_SECURITY_ERROR(n) LDAP_RANGE((n),0x2F,0x32) /* 47-50 */ + #define LDAP_SERVICE_ERROR(n) LDAP_RANGE((n),0x33,0x36) /* 51-54 */ + #define LDAP_UPDATE_ERROR(n) LDAP_RANGE((n),0x40,0x47) /* 64-69,71 */ + #define LDAP_E_ERROR(n) LDAP_RANGE((n),0x1000,0x3FFF) + #define LDAP_X_ERROR(n) LDAP_RANGE((n),0x4000,0xFFFF) + +## end of errorref.txt diff --git a/doc/gpgrt.info b/doc/gpgrt.info new file mode 100644 index 0000000..c373dd4 --- /dev/null +++ b/doc/gpgrt.info @@ -0,0 +1,1267 @@ +This is gpgrt.info, produced by makeinfo version 6.3 from gpgrt.texi. + +This manual is for Libgpg-error (version 1.31, 28 November 2017), which +is a library for code used by all GnuPG related packages. + +Copyright (C) 2014 g10 Code GmbH + + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. The text of the + license can be found in the section entitled "GNU General Public + License". +INFO-DIR-SECTION Libraries +START-INFO-DIR-ENTRY +* libgpg-error: (gnupg). Error codes and common code for GnuPG. +END-INFO-DIR-ENTRY + + +File: gpgrt.info, Node: Top, Next: Introduction, Up: (dir) + +The Libgpg-error Library +************************ + +This manual is for Libgpg-error (version 1.31, 28 November 2017), which +is a library for code used by all GnuPG related packages. + +Copyright (C) 2014 g10 Code GmbH + + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. The text of the + license can be found in the section entitled "GNU General Public + License". + +* Menu: + +* Introduction:: What is Libgpg-error. +* Preparation:: What you should do before using the library. +* Generalities:: General library functions and data types. +* Tools:: Utility tools + +Appendices + +* Library Copying:: The GNU Lesser General Public License + says how you can copy and share Libgpg-error. +* Copying:: The GNU General Public License says how you + can copy and share some parts of Libgpg-error. + +Indices + +* Concept Index:: Index of concepts and programs. +* Function and Data Index:: Index of functions, variables and data types. + + +File: gpgrt.info, Node: Introduction, Next: Preparation, Prev: Top, Up: Top + +1 Introduction +************** + +Libgpg-error is a library to provide error codes for GnuPG and relates +software as well as some other general purpose functions. It is planned +to eventually rename this library to "gpgrt" (for GnuPG RunTime). + +* Menu: + +* Getting Started:: How to use this manual. +* Features:: A glance at Libgpg-error’s features. +* Overview:: Overview about the library. + + +File: gpgrt.info, Node: Getting Started, Next: Features, Up: Introduction + +1.1 Getting Started +=================== + +This manual documents the Libgpg-error library application programming +interface (API). The goal is to that all functions and data types +provided by the library are explained. However, for now this is only a +stub and not very useful. + + +File: gpgrt.info, Node: Features, Next: Overview, Prev: Getting Started, Up: Introduction + +1.2 Features +============ + +TBD + + +File: gpgrt.info, Node: Overview, Prev: Features, Up: Introduction + +1.3 Overview +============ + +The Libgpg-error library is fully thread-safe, where it makes sense to +be thread-safe. + + TBD + + +File: gpgrt.info, Node: Preparation, Next: Generalities, Prev: Introduction, Up: Top + +2 Preparation +************* + +To use Libgpg-error, you have to perform some changes to your sources +and the build system. The necessary changes are small and explained in +the following sections. At the end of this chapter, it is described how +the library is initialized, and how the requirements of the library are +verified. + +* Menu: + +* Header:: What header file you need to include. +* Building sources:: How to build sources using the library. +* Building sources using Automake:: How to build sources with the help of Automake. +* Initializing the library:: How to initialize the library. +* Multi-Threading:: How Libgpg-error can be used in a MT environment. + + +File: gpgrt.info, Node: Header, Next: Building sources, Up: Preparation + +2.1 Header +========== + +All interfaces (data types and functions) of the library are defined in +the header file 'libgpg-error.h'. You must include this in all source +files using the library, either directly or through some other header +file, like this: + + #include + + Note well that the header file is platform specific and may only be +used on the platform for which it has been build. + + The name space of Libgpg-error is 'gpg_*' and 'gpgrt*' for function +and type names and 'GPG_*' and 'GPGRT_*' for other symbols. In addition +the same name prefixes with one prepended underscore are reserved for +internal use and should never be used by an application. + +Certain parts of gpg-error.h may be included by defining these macros: + +'GPG_ERR_ENABLE_GETTEXT_MACROS' + Define to provide macros to map the internal gettext API to + standard names. This has only an effect on Windows platforms. + +'GPGRT_ENABLE_ES_MACROS' + Define to provide "es_" macros for the estream functions. + + +File: gpgrt.info, Node: Building sources, Next: Building sources using Automake, Prev: Header, Up: Preparation + +2.2 Building sources +==================== + +If you want to compile a source file including the 'gpg-error.h' header +file, you must make sure that the compiler can find it in the directory +hierarchy. This is accomplished by adding the path to the directory in +which the header file is located to the compilers include file search +path (via the '-I' option). + + However, the path to the include file is determined at the time the +source is configured. To solve this problem, Libgpg-error ships with +the small helper programs 'gpg-error-config' and 'gpgrt-config' which +both know the path to the include file and other configuration options. +The options that need to be added to the compiler invocation at compile +time are output by the '--cflags' option to 'gpg-error-config' (or +'gpgrt-config'. The following example shows how it can be used at the +command line: + + gcc -c foo.c $(gpg-error-config --cflags) + + or with the identical + + gcc -c foo.c $(gpgrt-config --cflags) + + Adding the output of 'gpg-error-config --cflags' to the compiler’s +command line will ensure that the compiler can find the Libgpg-error +header file. + + A similar problem occurs when linking the program with the library. +Again, the compiler has to find the library files. For this to work, +the path to the library files has to be added to the library search path +(via the '-L' option). For this, the option '--libs' to +'gpg-error-config' can be used. The example shows how to link 'foo.o' +with the Libgpg-error library to a program 'foo'. + + gcc -o foo foo.o $(gpg-error-config --libs) + + Of course you can also combine both examples to a single command by +specifying both options to 'gpg-error-config': + + gcc -o foo foo.c $(gpg-error-config --cflags --libs) + + +File: gpgrt.info, Node: Building sources using Automake, Next: Initializing the library, Prev: Building sources, Up: Preparation + +2.3 Building sources using Automake +=================================== + +It is much easier if you use GNU Automake instead of writing your own +Makefiles. If you do that, you do not have to worry about finding and +invoking the 'gpg-error-config' script at all. Libgpg-error provides an +extension to Automake that does all the work for you. + + -- Macro: AM_PATH_GPG_ERROR ([MINIMUM-VERSION], [ACTION-IF-FOUND], + [ACTION-IF-NOT-FOUND]) + Check whether Libgpg-error (at least version MINIMUM-VERSION, if + given) exists on the host system. If it is found, execute + ACTION-IF-FOUND, otherwise do ACTION-IF-NOT-FOUND, if given. + + Additionally, the function defines 'GPG_ERROR_CFLAGS' to the flags + needed for compilation of the program to find the 'gpg-error.h' + header file, and 'GPG_ERROR_LIBS' to the linker flags needed to + link the program to the Libgpg-error library. If the used helper + script does not match the target type you are building for a + warning is printed and the string 'libgpg-error' is appended to the + variable 'gpg_config_script_warn'. + + This macro searches for 'gpg-error-config' along the PATH. If you + are cross-compiling, it is useful to set the environment variable + 'SYSROOT' to the top directory of your target. The macro will then + first look for the helper program in the 'bin' directory below that + top directory. An absolute directory name must be used for + 'SYSROOT'. Finally, if the configure command line option + '--with-libgpg-error-prefix' is used, only its value is used for + the top directory below which the helper script is expected. + + You can use the defined Autoconf variables like this in your +'Makefile.am': + + AM_CPPFLAGS = $(GPG_ERROR_CFLAGS) + LDADD = $(GPG_ERROR_LIBS) + + +File: gpgrt.info, Node: Initializing the library, Next: Multi-Threading, Prev: Building sources using Automake, Up: Preparation + +2.4 Initializing the library +============================ + +Before the library can be used, it should initialize itself. This is +achieved by invoking the function 'gpgrt_check_version' described below. + + Also, it is often desirable to check that the version of Libgpg-error +used is indeed one which fits all requirements. Even with binary +compatibility, new features may have been introduced, but due to problem +with the dynamic linker an old version may actually be used. So you may +want to check that the version is okay right after program startup. + + -- Function: const char * gpgrt_check_version (const char *REQ_VERSION) + + The function 'gpgrt_check_version' initializes some subsystems used + by Libgpg-error and must be invoked before any other function in + the library. *Note Multi-Threading::. + + Furthermore, this function returns the version number of the + library. It can also verify that the version number is higher than + a certain required version number REQ_VERSION, if this value is not + a null pointer. + + +File: gpgrt.info, Node: Multi-Threading, Prev: Initializing the library, Up: Preparation + +2.5 Multi-Threading +=================== + +TBD. + + +File: gpgrt.info, Node: Generalities, Next: Tools, Prev: Preparation, Up: Top + +3 Generalities +************** + +TBD. (Description of the error function may be taken from Libgcrypt.) + + +File: gpgrt.info, Node: Tools, Next: Library Copying, Prev: Generalities, Up: Top + +4 Tools +******* + +* Menu: + +* gpg-error-config:: Print required compiler flags + + +File: gpgrt.info, Node: gpg-error-config, Up: Tools + +4.1 Print required compiler flags +================================= + +'gpg-error-config' is a tool that is used to configure to determine the +compiler and linker flags that should be used to compile and link +programs that use Libgpg-error. It is also used internally to the '.m4' +macros for GNU autoconf that are included with Libgpg-error. + +'gpg-error-config' accepts the following options: + +'--mt' + Provide output appropriate for multithreaded programs. '--mt' is + only useful when combined with other options, and must be the first + option if present. + +'--version' + Print the currently installed version of Libgpg-error on the + standard output. + +'--libs' + Print the linker flags that are necessary to link a program using + Libgpg-error. + +'--cflags' + Print the compiler flags that are necessary to compile a program + using Libgpg-error. + +'--prefix=PREFIX' + If specified, use PREFIX instead of the installation prefix that + Libgpg-error was built with when computing the output for the + '--cflags' and '--libs' options. This option is also used for the + exec prefix if '--exec-prefix' was not specified. This option must + be specified before any '--libs' or '--cflags' options. + +'--exec-prefix=PREFIX' + If specified, use PREFIX instead of the installation exec prefix + that Libgpg-error was built with when computing the output for the + '--cflags' and '--libs' options. This option must be specified + before any '--libs' or '--cflags' options. + + +File: gpgrt.info, Node: Library Copying, Next: Copying, Prev: Tools, Up: Top + +GNU Lesser General Public License +********************************* + + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + [This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence the + version number 2.1.] + +Preamble +======== + +The licenses for most software are designed to take away your freedom to +share and change it. By contrast, the GNU General Public Licenses are +intended to guarantee your freedom to share and change free software--to +make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software--typically libraries--of the Free Software +Foundation and other authors who decide to use it. You can use it too, +but we suggest you first think carefully about whether this license or +the ordinary General Public License is the better strategy to use in any +particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of it +in new free programs; and that you are informed that you can do these +things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling it. +And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that there +is no warranty for the free library. Also, if the library is modified +by someone else and passed on, the recipients should know that what they +have is not the original version, so that the original author's +reputation will not be affected by problems that might be introduced by +others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that any +patent license obtained for a version of the library must be consistent +with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and is +quite different from the ordinary General Public License. We use this +license for certain libraries in order to permit linking those libraries +into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the entire +combination fits its criteria of freedom. The Lesser General Public +License permits more lax criteria for linking other code with the +library. + + We call this license the "Lesser" General Public License because it +does _Less_ to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less of +an advantage over competing non-free programs. These disadvantages are +the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it +becomes a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free library +does the same job as widely used non-free libraries. In this case, +there is little to gain by limiting the free library to free software +only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of free +software. For example, permission to use the GNU C Library in non-free +programs enables many more people to use the whole GNU operating system, +as well as its variant, the GNU/Linux operating system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is linked +with the Library has the freedom and the wherewithal to run that program +using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other + program which contains a notice placed by the copyright holder or + other authorized party saying it may be distributed under the terms + of this Lesser General Public License (also called "this License"). + Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data + prepared so as to be conveniently linked with application programs + (which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work + which has been distributed under these terms. A "work based on the + Library" means either the Library or any derivative work under + copyright law: that is to say, a work containing the Library or a + portion of it, either verbatim or with modifications and/or + translated straightforwardly into another language. (Hereinafter, + translation is included without limitation in the term + "modification".) + + "Source code" for a work means the preferred form of the work for + making modifications to it. For a library, complete source code + means all the source code for all modules it contains, plus any + associated interface definition files, plus the scripts used to + control compilation and installation of the library. + + Activities other than copying, distribution and modification are + not covered by this License; they are outside its scope. The act + of running a program using the Library is not restricted, and + output from such a program is covered only if its contents + constitute a work based on the Library (independent of the use of + the Library in a tool for writing it). Whether that is true + depends on what the Library does and what the program that uses the + Library does. + + 1. You may copy and distribute verbatim copies of the Library's + complete source code as you receive it, in any medium, provided + that you conspicuously and appropriately publish on each copy an + appropriate copyright notice and disclaimer of warranty; keep + intact all the notices that refer to this License and to the + absence of any warranty; and distribute a copy of this License + along with the Library. + + You may charge a fee for the physical act of transferring a copy, + and you may at your option offer warranty protection in exchange + for a fee. + + 2. You may modify your copy or copies of the Library or any portion of + it, thus forming a work based on the Library, and copy and + distribute such modifications or work under the terms of Section 1 + above, provided that you also meet all of these conditions: + + a. The modified work must itself be a software library. + + b. You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c. You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d. If a facility in the modified Library refers to a function or + a table of data to be supplied by an application program that + uses the facility, other than as an argument passed when the + facility is invoked, then you must make a good faith effort to + ensure that, in the event an application does not supply such + function or table, the facility still operates, and performs + whatever part of its purpose remains meaningful. + + (For example, a function in a library to compute square roots + has a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function + must be optional: if the application does not supply it, the + square root function must still compute square roots.) + + These requirements apply to the modified work as a whole. If + identifiable sections of that work are not derived from the + Library, and can be reasonably considered independent and separate + works in themselves, then this License, and its terms, do not apply + to those sections when you distribute them as separate works. But + when you distribute the same sections as part of a whole which is a + work based on the Library, the distribution of the whole must be on + the terms of this License, whose permissions for other licensees + extend to the entire whole, and thus to each and every part + regardless of who wrote it. + + Thus, it is not the intent of this section to claim rights or + contest your rights to work written entirely by you; rather, the + intent is to exercise the right to control the distribution of + derivative or collective works based on the Library. + + In addition, mere aggregation of another work not based on the + Library with the Library (or with a work based on the Library) on a + volume of a storage or distribution medium does not bring the other + work under the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public + License instead of this License to a given copy of the Library. To + do this, you must alter all the notices that refer to this License, + so that they refer to the ordinary GNU General Public License, + version 2, instead of to this License. (If a newer version than + version 2 of the ordinary GNU General Public License has appeared, + then you can specify that version instead if you wish.) Do not + make any other change in these notices. + + Once this change is made in a given copy, it is irreversible for + that copy, so the ordinary GNU General Public License applies to + all subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of the + Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or derivative + of it, under Section 2) in object code or executable form under the + terms of Sections 1 and 2 above provided that you accompany it with + the complete corresponding machine-readable source code, which must + be distributed under the terms of Sections 1 and 2 above on a + medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy + from a designated place, then offering equivalent access to copy + the source code from the same place satisfies the requirement to + distribute the source code, even though third parties are not + compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the + Library, but is designed to work with the Library by being compiled + or linked with it, is called a "work that uses the Library". Such + a work, in isolation, is not a derivative work of the Library, and + therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library + creates an executable that is a derivative of the Library (because + it contains portions of the Library), rather than a "work that uses + the library". The executable is therefore covered by this License. + Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header + file that is part of the Library, the object code for the work may + be a derivative work of the Library even though the source code is + not. Whether this is true is especially significant if the work + can be linked without the Library, or if the work is itself a + library. The threshold for this to be true is not precisely + defined by law. + + If such an object file uses only numerical parameters, data + structure layouts and accessors, and small macros and small inline + functions (ten lines or less in length), then the use of the object + file is unrestricted, regardless of whether it is legally a + derivative work. (Executables containing this object code plus + portions of the Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may + distribute the object code for the work under the terms of Section + 6. Any executables containing that work also fall under Section 6, + whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or link + a "work that uses the Library" with the Library to produce a work + containing portions of the Library, and distribute that work under + terms of your choice, provided that the terms permit modification + of the work for the customer's own use and reverse engineering for + debugging such modifications. + + You must give prominent notice with each copy of the work that the + Library is used in it and that the Library and its use are covered + by this License. You must supply a copy of this License. If the + work during execution displays copyright notices, you must include + the copyright notice for the Library among them, as well as a + reference directing the user to the copy of this License. Also, + you must do one of these things: + + a. Accompany the work with the complete corresponding + machine-readable source code for the Library including + whatever changes were used in the work (which must be + distributed under Sections 1 and 2 above); and, if the work is + an executable linked with the Library, with the complete + machine-readable "work that uses the Library", as object code + and/or source code, so that the user can modify the Library + and then relink to produce a modified executable containing + the modified Library. (It is understood that the user who + changes the contents of definitions files in the Library will + not necessarily be able to recompile the application to use + the modified definitions.) + + b. Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run + time a copy of the library already present on the user's + computer system, rather than copying library functions into + the executable, and (2) will operate properly with a modified + version of the library, if the user installs one, as long as + the modified version is interface-compatible with the version + that the work was made with. + + c. Accompany the work with a written offer, valid for at least + three years, to give the same user the materials specified in + Subsection 6a, above, for a charge no more than the cost of + performing this distribution. + + d. If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the + above specified materials from the same place. + + e. Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the + Library" must include any data and utility programs needed for + reproducing the executable from it. However, as a special + exception, the materials to be distributed need not include + anything that is normally distributed (in either source or binary + form) with the major components (compiler, kernel, and so on) of + the operating system on which the executable runs, unless that + component itself accompanies the executable. + + It may happen that this requirement contradicts the license + restrictions of other proprietary libraries that do not normally + accompany the operating system. Such a contradiction means you + cannot use both them and the Library together in an executable that + you distribute. + + 7. You may place library facilities that are a work based on the + Library side-by-side in a single library together with other + library facilities not covered by this License, and distribute such + a combined library, provided that the separate distribution of the + work based on the Library and of the other library facilities is + otherwise permitted, and provided that you do these two things: + + a. Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b. Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same + work. + + 8. You may not copy, modify, sublicense, link with, or distribute the + Library except as expressly provided under this License. Any + attempt otherwise to copy, modify, sublicense, link with, or + distribute the Library is void, and will automatically terminate + your rights under this License. However, parties who have received + copies, or rights, from you under this License will not have their + licenses terminated so long as such parties remain in full + compliance. + + 9. You are not required to accept this License, since you have not + signed it. However, nothing else grants you permission to modify + or distribute the Library or its derivative works. These actions + are prohibited by law if you do not accept this License. + Therefore, by modifying or distributing the Library (or any work + based on the Library), you indicate your acceptance of this License + to do so, and all its terms and conditions for copying, + distributing or modifying the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the + Library), the recipient automatically receives a license from the + original licensor to copy, distribute, link with or modify the + Library subject to these terms and conditions. You may not impose + any further restrictions on the recipients' exercise of the rights + granted herein. You are not responsible for enforcing compliance + by third parties with this License. + + 11. If, as a consequence of a court judgment or allegation of patent + infringement or for any other reason (not limited to patent + issues), conditions are imposed on you (whether by court order, + agreement or otherwise) that contradict the conditions of this + License, they do not excuse you from the conditions of this + License. If you cannot distribute so as to satisfy simultaneously + your obligations under this License and any other pertinent + obligations, then as a consequence you may not distribute the + Library at all. For example, if a patent license would not permit + royalty-free redistribution of the Library by all those who receive + copies directly or indirectly through you, then the only way you + could satisfy both it and this License would be to refrain entirely + from distribution of the Library. + + If any portion of this section is held invalid or unenforceable + under any particular circumstance, the balance of the section is + intended to apply, and the section as a whole is intended to apply + in other circumstances. + + It is not the purpose of this section to induce you to infringe any + patents or other property right claims or to contest validity of + any such claims; this section has the sole purpose of protecting + the integrity of the free software distribution system which is + implemented by public license practices. Many people have made + generous contributions to the wide range of software distributed + through that system in reliance on consistent application of that + system; it is up to the author/donor to decide if he or she is + willing to distribute software through any other system and a + licensee cannot impose that choice. + + This section is intended to make thoroughly clear what is believed + to be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in + certain countries either by patents or by copyrighted interfaces, + the original copyright holder who places the Library under this + License may add an explicit geographical distribution limitation + excluding those countries, so that distribution is permitted only + in or among countries not thus excluded. In such case, this + License incorporates the limitation as if written in the body of + this License. + + 13. The Free Software Foundation may publish revised and/or new + versions of the Lesser General Public License from time to time. + Such new versions will be similar in spirit to the present version, + but may differ in detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the + Library specifies a version number of this License which applies to + it and "any later version", you have the option of following the + terms and conditions either of that version or of any later version + published by the Free Software Foundation. If the Library does not + specify a license version number, you may choose any version ever + published by the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free + programs whose distribution conditions are incompatible with these, + write to the author to ask for permission. For software which is + copyrighted by the Free Software Foundation, write to the Free + Software Foundation; we sometimes make exceptions for this. Our + decision will be guided by the two goals of preserving the free + status of all derivatives of our free software and of promoting the + sharing and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO + WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE + LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS + AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY + OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND + PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE + DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR + OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN + WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY + MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE + LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, + INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR + INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF + DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU + OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY + OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN + ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + +How to Apply These Terms to Your New Libraries +============================================== + +If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms of +the ordinary General Public License). + + To apply these terms, attach the following notices to the library. +It is safest to attach them to the start of each source file to most +effectively convey the exclusion of warranty; and each file should have +at least the "copyright" line and a pointer to where the full notice is +found. + + ONE LINE TO GIVE THE LIBRARY'S NAME AND AN IDEA OF WHAT IT DOES. + Copyright (C) YEAR NAME OF AUTHOR + + This library is free software; you can redistribute it and/or modify it + under the terms of the GNU Lesser General Public License as published by + the Free Software Foundation; either version 2.1 of the License, or (at + your option) any later version. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, + USA. + + Also add information on how to contact you by electronic and paper +mail. + + You should also get your employer (if you work as a programmer) or +your school, if any, to sign a "copyright disclaimer" for the library, +if necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the library + `Frob' (a library for tweaking knobs) written by James Random Hacker. + + SIGNATURE OF TY COON, 1 April 1990 + Ty Coon, President of Vice + + That's all there is to it! + + +File: gpgrt.info, Node: Copying, Next: Concept Index, Prev: Library Copying, Up: Top + +GNU General Public License +************************** + + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +Preamble +======== + +The licenses for most software are designed to take away your freedom to +share and change it. By contrast, the GNU General Public License is +intended to guarantee your freedom to share and change free software--to +make sure the software is free for all its users. This General Public +License applies to most of the Free Software Foundation's software and +to any other program whose authors commit to using it. (Some other Free +Software Foundation software is covered by the GNU Library General +Public License instead.) You can apply it to your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it if +you want it, that you can change the software or use pieces of it in new +free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, +and (2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 1. This License applies to any program or other work which contains a + notice placed by the copyright holder saying it may be distributed + under the terms of this General Public License. The "Program", + below, refers to any such program or work, and a "work based on the + Program" means either the Program or any derivative work under + copyright law: that is to say, a work containing the Program or a + portion of it, either verbatim or with modifications and/or + translated into another language. (Hereinafter, translation is + included without limitation in the term "modification".) Each + licensee is addressed as "you". + + Activities other than copying, distribution and modification are + not covered by this License; they are outside its scope. The act + of running the Program is not restricted, and the output from the + Program is covered only if its contents constitute a work based on + the Program (independent of having been made by running the + Program). Whether that is true depends on what the Program does. + + 2. You may copy and distribute verbatim copies of the Program's source + code as you receive it, in any medium, provided that you + conspicuously and appropriately publish on each copy an appropriate + copyright notice and disclaimer of warranty; keep intact all the + notices that refer to this License and to the absence of any + warranty; and give any other recipients of the Program a copy of + this License along with the Program. + + You may charge a fee for the physical act of transferring a copy, + and you may at your option offer warranty protection in exchange + for a fee. + + 3. You may modify your copy or copies of the Program or any portion of + it, thus forming a work based on the Program, and copy and + distribute such modifications or work under the terms of Section 1 + above, provided that you also meet all of these conditions: + + a. You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b. You must cause any work that you distribute or publish, that + in whole or in part contains or is derived from the Program or + any part thereof, to be licensed as a whole at no charge to + all third parties under the terms of this License. + + c. If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display + an announcement including an appropriate copyright notice and + a notice that there is no warranty (or else, saying that you + provide a warranty) and that users may redistribute the + program under these conditions, and telling the user how to + view a copy of this License. (Exception: if the Program + itself is interactive but does not normally print such an + announcement, your work based on the Program is not required + to print an announcement.) + + These requirements apply to the modified work as a whole. If + identifiable sections of that work are not derived from the + Program, and can be reasonably considered independent and separate + works in themselves, then this License, and its terms, do not apply + to those sections when you distribute them as separate works. But + when you distribute the same sections as part of a whole which is a + work based on the Program, the distribution of the whole must be on + the terms of this License, whose permissions for other licensees + extend to the entire whole, and thus to each and every part + regardless of who wrote it. + + Thus, it is not the intent of this section to claim rights or + contest your rights to work written entirely by you; rather, the + intent is to exercise the right to control the distribution of + derivative or collective works based on the Program. + + In addition, mere aggregation of another work not based on the + Program with the Program (or with a work based on the Program) on a + volume of a storage or distribution medium does not bring the other + work under the scope of this License. + + 4. You may copy and distribute the Program (or a work based on it, + under Section 2) in object code or executable form under the terms + of Sections 1 and 2 above provided that you also do one of the + following: + + a. Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of + Sections 1 and 2 above on a medium customarily used for + software interchange; or, + + b. Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a + medium customarily used for software interchange; or, + + c. Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with + such an offer, in accord with Subsection b above.) + + The source code for a work means the preferred form of the work for + making modifications to it. For an executable work, complete + source code means all the source code for all modules it contains, + plus any associated interface definition files, plus the scripts + used to control compilation and installation of the executable. + However, as a special exception, the source code distributed need + not include anything that is normally distributed (in either source + or binary form) with the major components (compiler, kernel, and so + on) of the operating system on which the executable runs, unless + that component itself accompanies the executable. + + If distribution of executable or object code is made by offering + access to copy from a designated place, then offering equivalent + access to copy the source code from the same place counts as + distribution of the source code, even though third parties are not + compelled to copy the source along with the object code. + + 5. You may not copy, modify, sublicense, or distribute the Program + except as expressly provided under this License. Any attempt + otherwise to copy, modify, sublicense or distribute the Program is + void, and will automatically terminate your rights under this + License. However, parties who have received copies, or rights, + from you under this License will not have their licenses terminated + so long as such parties remain in full compliance. + + 6. You are not required to accept this License, since you have not + signed it. However, nothing else grants you permission to modify + or distribute the Program or its derivative works. These actions + are prohibited by law if you do not accept this License. + Therefore, by modifying or distributing the Program (or any work + based on the Program), you indicate your acceptance of this License + to do so, and all its terms and conditions for copying, + distributing or modifying the Program or works based on it. + + 7. Each time you redistribute the Program (or any work based on the + Program), the recipient automatically receives a license from the + original licensor to copy, distribute or modify the Program subject + to these terms and conditions. You may not impose any further + restrictions on the recipients' exercise of the rights granted + herein. You are not responsible for enforcing compliance by third + parties to this License. + + 8. If, as a consequence of a court judgment or allegation of patent + infringement or for any other reason (not limited to patent + issues), conditions are imposed on you (whether by court order, + agreement or otherwise) that contradict the conditions of this + License, they do not excuse you from the conditions of this + License. If you cannot distribute so as to satisfy simultaneously + your obligations under this License and any other pertinent + obligations, then as a consequence you may not distribute the + Program at all. For example, if a patent license would not permit + royalty-free redistribution of the Program by all those who receive + copies directly or indirectly through you, then the only way you + could satisfy both it and this License would be to refrain entirely + from distribution of the Program. + + If any portion of this section is held invalid or unenforceable + under any particular circumstance, the balance of the section is + intended to apply and the section as a whole is intended to apply + in other circumstances. + + It is not the purpose of this section to induce you to infringe any + patents or other property right claims or to contest validity of + any such claims; this section has the sole purpose of protecting + the integrity of the free software distribution system, which is + implemented by public license practices. Many people have made + generous contributions to the wide range of software distributed + through that system in reliance on consistent application of that + system; it is up to the author/donor to decide if he or she is + willing to distribute software through any other system and a + licensee cannot impose that choice. + + This section is intended to make thoroughly clear what is believed + to be a consequence of the rest of this License. + + 9. If the distribution and/or use of the Program is restricted in + certain countries either by patents or by copyrighted interfaces, + the original copyright holder who places the Program under this + License may add an explicit geographical distribution limitation + excluding those countries, so that distribution is permitted only + in or among countries not thus excluded. In such case, this + License incorporates the limitation as if written in the body of + this License. + + 10. The Free Software Foundation may publish revised and/or new + versions of the General Public License from time to time. Such new + versions will be similar in spirit to the present version, but may + differ in detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the + Program specifies a version number of this License which applies to + it and "any later version", you have the option of following the + terms and conditions either of that version or of any later version + published by the Free Software Foundation. If the Program does not + specify a version number of this License, you may choose any + version ever published by the Free Software Foundation. + + 11. If you wish to incorporate parts of the Program into other free + programs whose distribution conditions are different, write to the + author to ask for permission. For software which is copyrighted by + the Free Software Foundation, write to the Free Software + Foundation; we sometimes make exceptions for this. Our decision + will be guided by the two goals of preserving the free status of + all derivatives of our free software and of promoting the sharing + and reuse of software generally. + + NO WARRANTY + + 12. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO + WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE + LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS + AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY + OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND + PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE + DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR + OR CORRECTION. + + 13. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN + WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY + MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE + LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, + INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR + INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF + DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU + OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY + OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN + ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + +How to Apply These Terms to Your New Programs +============================================= + +If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these +terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + + ONE LINE TO GIVE THE PROGRAM'S NAME AND AN IDEA OF WHAT IT DOES. + Copyright (C) 19YY NAME OF AUTHOR + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + + Also add information on how to contact you by electronic and paper +mail. + + If the program is interactive, make it output a short notice like +this when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19YY NAME OF AUTHOR + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details + type `show w'. This is free software, and you are welcome + to redistribute it under certain conditions; type `show c' + for details. + + The hypothetical commands 'show w' and 'show c' should show the +appropriate parts of the General Public License. Of course, the +commands you use may be called something other than 'show w' and 'show +c'; they could even be mouse-clicks or menu items--whatever suits your +program. + + You should also get your employer (if you work as a programmer) or +your school, if any, to sign a "copyright disclaimer" for the program, +if necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright + interest in the program `Gnomovision' + (which makes passes at compilers) written + by James Hacker. + + SIGNATURE OF TY COON, 1 April 1989 + Ty Coon, President of Vice + + This General Public License does not permit incorporating your +program into proprietary programs. If your program is a subroutine +library, you may consider it more useful to permit linking proprietary +applications with the library. If this is what you want to do, use the +GNU Library General Public License instead of this License. + + +File: gpgrt.info, Node: Concept Index, Next: Function and Data Index, Prev: Copying, Up: Top + +Concept Index +************* + +