# Makefile.in generated by automake 1.14.1 from Makefile.am.

# @configure_input@

# Copyright (C) 1994-2013 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation

# gives unlimited permission to copy and/or distribute it,

# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

# PARTICULAR PURPOSE.

@SET_MAKE@

# Makefile.am for libgpg-error documentation

# Copyright (C) 2014 g10 Code GmbH

#

# This file is part of libgpg-error.

#

# libgpg-error is free software; you can redistribute it and/or modify

# it under the terms of the GNU Lesser General Public License as

# published by the Free Software Foundation; either version 2.1 of the

# License, or (at your option) any later version.

#

# libgpg-error is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU Lesser General Public License for more details.

#

# You should have received a copy of the GNU Lesser General Public

# License along with this program; if not, see <https://www.gnu.org/licenses/>.

VPATH = @srcdir@

am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'

am__make_running_with_option = \

  case $${target_option-} in \

      ?) ;; \

      *) echo "am__make_running_with_option: internal error: invalid" \

              "target option '$${target_option-}' specified" >&2; \

         exit 1;; \

  esac; \

  has_opt=no; \

  sane_makeflags=$$MAKEFLAGS; \

  if $(am__is_gnu_make); then \

    sane_makeflags=$$MFLAGS; \

  else \

    case $$MAKEFLAGS in \

      *\\[\ \	]*) \

        bs=\\; \

        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \

          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \

    esac; \

  fi; \

  skip_next=no; \

  strip_trailopt () \

  { \

    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \

  }; \

  for flg in $$sane_makeflags; do \

    test $$skip_next = yes && { skip_next=no; continue; }; \

    case $$flg in \

      *=*|--*) continue;; \

        -*I) strip_trailopt 'I'; skip_next=yes;; \

      -*I?*) strip_trailopt 'I';; \

        -*O) strip_trailopt 'O'; skip_next=yes;; \

      -*O?*) strip_trailopt 'O';; \

        -*l) strip_trailopt 'l'; skip_next=yes;; \

      -*l?*) strip_trailopt 'l';; \

      -[dEDm]) skip_next=yes;; \

      -[JT]) skip_next=yes;; \

    esac; \

    case $$flg in \

      *$$target_option*) has_opt=yes; break;; \

    esac; \

  done; \

  test $$has_opt = yes

am__make_dryrun = (target_option=n; $(am__make_running_with_option))

am__make_keepgoing = (target_option=k; $(am__make_running_with_option))

pkgdatadir = $(datadir)/@PACKAGE@

pkgincludedir = $(includedir)/@PACKAGE@

pkglibdir = $(libdir)/@PACKAGE@

pkglibexecdir = $(libexecdir)/@PACKAGE@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

install_sh_DATA = $(install_sh) -c -m 644

install_sh_PROGRAM = $(install_sh) -c

install_sh_SCRIPT = $(install_sh) -c

INSTALL_HEADER = $(INSTALL_DATA)

transform = $(program_transform_name)

NORMAL_INSTALL = :

PRE_INSTALL = :

POST_INSTALL = :

NORMAL_UNINSTALL = :

PRE_UNINSTALL = :

POST_UNINSTALL = :

build_triplet = @build@

host_triplet = @host@

bin_PROGRAMS = yat2m$(EXEEXT)

@CROSS_COMPILING_TRUE@@HAVE_YAT2M_FALSE@am__append_1 = yat2m-for-build

subdir = doc

DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \

	$(top_srcdir)/build-aux/depcomp $(gpgrt_TEXINFOS) \

	$(top_srcdir)/build-aux/mdate-sh $(srcdir)/version.texi \

	$(srcdir)/stamp-vti $(top_srcdir)/build-aux/texinfo.tex

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \

	$(top_srcdir)/m4/estream.m4 $(top_srcdir)/m4/gettext.m4 \

	$(top_srcdir)/m4/gnupg-misc.m4 $(top_srcdir)/m4/iconv.m4 \

	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \

	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \

	$(top_srcdir)/m4/lock.m4 $(top_srcdir)/m4/ltoptions.m4 \

	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \

	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \

	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \

	$(top_srcdir)/m4/readline.m4 $(top_srcdir)/m4/threadlib.m4 \

	$(top_srcdir)/configure.ac

am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

	$(ACLOCAL_M4)

mkinstalldirs = $(install_sh) -d

CONFIG_HEADER = $(top_builddir)/config.h

CONFIG_CLEAN_FILES =

CONFIG_CLEAN_VPATH_FILES =

am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" \

	"$(DESTDIR)$(man1dir)"

PROGRAMS = $(bin_PROGRAMS)

am_yat2m_OBJECTS = yat2m-yat2m.$(OBJEXT)

yat2m_OBJECTS = $(am_yat2m_OBJECTS)

yat2m_LDADD = $(LDADD)

AM_V_lt = $(am__v_lt_@AM_V@)

am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)

am__v_lt_0 = --silent

am__v_lt_1 = 

yat2m_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \

	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(yat2m_CFLAGS) $(CFLAGS) \

	$(AM_LDFLAGS) $(LDFLAGS) -o $@

AM_V_P = $(am__v_P_@AM_V@)

am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)

am__v_P_0 = false

am__v_P_1 = :

AM_V_GEN = $(am__v_GEN_@AM_V@)

am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)

am__v_GEN_0 = @echo "  GEN     " $@;

am__v_GEN_1 = 

AM_V_at = $(am__v_at_@AM_V@)

am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)

am__v_at_0 = @

am__v_at_1 = 

DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)

depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp

am__depfiles_maybe = depfiles

am__mv = mv -f

COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \

	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)

LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \

	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \

	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \

	$(AM_CFLAGS) $(CFLAGS)

AM_V_CC = $(am__v_CC_@AM_V@)

am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)

am__v_CC_0 = @echo "  CC      " $@;

am__v_CC_1 = 

CCLD = $(CC)

LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \

	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \

	$(AM_LDFLAGS) $(LDFLAGS) -o $@

AM_V_CCLD = $(am__v_CCLD_@AM_V@)

am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)

am__v_CCLD_0 = @echo "  CCLD    " $@;

am__v_CCLD_1 = 

SOURCES = $(yat2m_SOURCES)

DIST_SOURCES = $(yat2m_SOURCES)

AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)

am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)

am__v_DVIPS_0 = @echo "  DVIPS   " $@;

am__v_DVIPS_1 = 

AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)

am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)

am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;

am__v_MAKEINFO_1 = 

AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)

am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)

am__v_INFOHTML_0 = @echo "  INFOHTML" $@;

am__v_INFOHTML_1 = 

AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)

am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)

am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;

am__v_TEXI2DVI_1 = 

AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)

am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)

am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;

am__v_TEXI2PDF_1 = 

AM_V_texinfo = $(am__v_texinfo_@AM_V@)

am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)

am__v_texinfo_0 = -q

am__v_texinfo_1 = 

AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)

am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)

am__v_texidevnull_0 = > /dev/null

am__v_texidevnull_1 = 

INFO_DEPS = $(srcdir)/gpgrt.info

TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex

am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux

DVIS = gpgrt.dvi

PDFS = gpgrt.pdf

PSS = gpgrt.ps

HTMLS = gpgrt.html

TEXINFOS = gpgrt.texi

TEXI2DVI = texi2dvi

TEXI2PDF = $(TEXI2DVI) --pdf --batch

MAKEINFOHTML = $(MAKEINFO) --html

AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)

DVIPS = dvips

am__can_run_installinfo = \

  case $$AM_UPDATE_INFO_DIR in \

    n|no|NO) false;; \

    *) (install-info --version) >/dev/null 2>&1;; \

  esac

am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;

am__vpath_adj = case $$p in \

    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \

    *) f=$$p;; \

  esac;

am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;

am__install_max = 40

am__nobase_strip_setup = \

  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`

am__nobase_strip = \

  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"

am__nobase_list = $(am__nobase_strip_setup); \

  for p in $$list; do echo "$$p $$p"; done | \

  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \

  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \

    if (++n[$$2] == $(am__install_max)) \

      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \

    END { for (dir in files) print dir, files[dir] }'

am__base_list = \

  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \

  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'

am__uninstall_files_from_dir = { \

  test -z "$$files" \

    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \

    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \

         $(am__cd) "$$dir" && rm -f $$files; }; \

  }

man1dir = $(mandir)/man1

NROFF = nroff

MANS = $(man_MANS)

am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)

# Read a list of newline-separated strings from the standard input,

# and print each of them once, without duplicates.  Input order is

# *not* preserved.

am__uniquify_input = $(AWK) '\

  BEGIN { nonempty = 0; } \

  { items[$$0] = 1; nonempty = 1; } \

  END { if (nonempty) { for (i in items) print i; }; } \

'

# Make sure the list of sources is unique.  This is necessary because,

# e.g., the same source file might be shared among _SOURCES variables

# for different programs/libraries.

am__define_uniq_tagged_files = \

  list='$(am__tagged_files)'; \

  unique=`for i in $$list; do \

    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

  done | $(am__uniquify_input)`

ETAGS = etags

CTAGS = ctags

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

ACLOCAL = @ACLOCAL@

AMTAR = @AMTAR@

AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@

AR = @AR@

AS = @AS@

AUTOCONF = @AUTOCONF@

AUTOHEADER = @AUTOHEADER@

AUTOMAKE = @AUTOMAKE@

AWK = @AWK@

BUILD_FILEVERSION = @BUILD_FILEVERSION@

BUILD_REVISION = @BUILD_REVISION@

BUILD_TIMESTAMP = @BUILD_TIMESTAMP@

BUILD_VERSION = @BUILD_VERSION@

CC = @CC@

CCDEPMODE = @CCDEPMODE@

CC_FOR_BUILD = @CC_FOR_BUILD@

CFLAGS = @CFLAGS@

CPP = @CPP@

CPPFLAGS = @CPPFLAGS@

CYGPATH_W = @CYGPATH_W@

DEFS = @DEFS@

DEPDIR = @DEPDIR@

DLLTOOL = @DLLTOOL@

DSYMUTIL = @DSYMUTIL@

DUMPBIN = @DUMPBIN@

ECHO_C = @ECHO_C@

ECHO_N = @ECHO_N@

ECHO_T = @ECHO_T@

EGREP = @EGREP@

EXEEXT = @EXEEXT@

FGREP = @FGREP@

GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@

GMSGFMT = @GMSGFMT@

GMSGFMT_015 = @GMSGFMT_015@

GPG_ERROR_CONFIG_CFLAGS = @GPG_ERROR_CONFIG_CFLAGS@

GPG_ERROR_CONFIG_HOST = @GPG_ERROR_CONFIG_HOST@

GPG_ERROR_CONFIG_ISUBDIRAFTER = @GPG_ERROR_CONFIG_ISUBDIRAFTER@

GPG_ERROR_CONFIG_LIBS = @GPG_ERROR_CONFIG_LIBS@

GPG_ERROR_CONFIG_MT_CFLAGS = @GPG_ERROR_CONFIG_MT_CFLAGS@

GPG_ERROR_CONFIG_MT_LIBS = @GPG_ERROR_CONFIG_MT_LIBS@

GREP = @GREP@

INSTALL = @INSTALL@

INSTALL_DATA = @INSTALL_DATA@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_SCRIPT = @INSTALL_SCRIPT@

INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

INTLLIBS = @INTLLIBS@

INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@

LD = @LD@

LDFLAGS = @LDFLAGS@

LIBGPG_ERROR_LT_AGE = @LIBGPG_ERROR_LT_AGE@

LIBGPG_ERROR_LT_CURRENT = @LIBGPG_ERROR_LT_CURRENT@

LIBGPG_ERROR_LT_REVISION = @LIBGPG_ERROR_LT_REVISION@

LIBICONV = @LIBICONV@

LIBINTL = @LIBINTL@

LIBMULTITHREAD = @LIBMULTITHREAD@

LIBOBJS = @LIBOBJS@

LIBREADLINE = @LIBREADLINE@

LIBS = @LIBS@

LIBTHREAD = @LIBTHREAD@

LIBTOOL = @LIBTOOL@

LIB_NETWORK = @LIB_NETWORK@

LIB_SCHED_YIELD = @LIB_SCHED_YIELD@

LIPO = @LIPO@

LN_S = @LN_S@

LTLIBICONV = @LTLIBICONV@

LTLIBINTL = @LTLIBINTL@

LTLIBMULTITHREAD = @LTLIBMULTITHREAD@

LTLIBOBJS = @LTLIBOBJS@

LTLIBTHREAD = @LTLIBTHREAD@

MAINT = @MAINT@

MAKEINFO = @MAKEINFO@

MANIFEST_TOOL = @MANIFEST_TOOL@

MKDIR_P = @MKDIR_P@

MSGFMT = @MSGFMT@

MSGFMT_015 = @MSGFMT_015@

MSGMERGE = @MSGMERGE@

NM = @NM@

NMEDIT = @NMEDIT@

OBJDUMP = @OBJDUMP@

OBJEXT = @OBJEXT@

OTOOL = @OTOOL@

OTOOL64 = @OTOOL64@

PACKAGE = @PACKAGE@

PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

PACKAGE_NAME = @PACKAGE_NAME@

PACKAGE_STRING = @PACKAGE_STRING@

PACKAGE_TARNAME = @PACKAGE_TARNAME@

PACKAGE_URL = @PACKAGE_URL@

PACKAGE_VERSION = @PACKAGE_VERSION@

PATH_SEPARATOR = @PATH_SEPARATOR@

POSUB = @POSUB@

RANLIB = @RANLIB@

RC = @RC@

SED = @SED@

SET_MAKE = @SET_MAKE@

SHELL = @SHELL@

STRIP = @STRIP@

USE_NLS = @USE_NLS@

VERSION = @VERSION@

VERSION_NUMBER = @VERSION_NUMBER@

XGETTEXT = @XGETTEXT@

XGETTEXT_015 = @XGETTEXT_015@

XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@

YAT2M = @YAT2M@

abs_builddir = @abs_builddir@

abs_srcdir = @abs_srcdir@

abs_top_builddir = @abs_top_builddir@

abs_top_srcdir = @abs_top_srcdir@

ac_ct_AR = @ac_ct_AR@

ac_ct_CC = @ac_ct_CC@

ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

am__include = @am__include@

am__leading_dot = @am__leading_dot@

am__quote = @am__quote@

am__tar = @am__tar@

am__untar = @am__untar@

bindir = @bindir@

build = @build@

build_alias = @build_alias@

build_cpu = @build_cpu@

build_os = @build_os@

build_vendor = @build_vendor@

builddir = @builddir@

datadir = @datadir@

datarootdir = @datarootdir@

docdir = @docdir@

dvidir = @dvidir@

exec_prefix = @exec_prefix@

host = @host@

host_alias = @host_alias@

host_cpu = @host_cpu@

host_os = @host_os@

host_vendor = @host_vendor@

htmldir = @htmldir@

includedir = @includedir@

infodir = @infodir@

install_sh = @install_sh@

libdir = @libdir@

libexecdir = @libexecdir@

localedir = @localedir@

localstatedir = @localstatedir@

mandir = @mandir@

mkdir_p = @mkdir_p@

oldincludedir = @oldincludedir@

pdfdir = @pdfdir@

prefix = @prefix@

program_transform_name = @program_transform_name@

psdir = @psdir@

sbindir = @sbindir@

sharedstatedir = @sharedstatedir@

srcdir = @srcdir@

sysconfdir = @sysconfdir@

target_alias = @target_alias@

top_build_prefix = @top_build_prefix@

top_builddir = @top_builddir@

top_srcdir = @top_srcdir@

EXTRA_DIST = HACKING errorref.txt

yat2m_SOURCES = yat2m.c

yat2m_CFLAGS = -DPACKAGE_VERSION="\"$(PACKAGE_VERSION)\""

DISTCLEANFILES = gpgrt.cps yat2m-stamp.tmp yat2m-stamp $(myman_pages)

CLEANFILES = errorref.txt.x $(am__append_1)

info_TEXINFOS = gpgrt.texi

gpgrt_TEXINFOS = lgpl.texi gpl.texi

YAT2M_OPTIONS = -I $(srcdir) \

	--release "Libgpg-error @PACKAGE_VERSION@" --source "GnuPG"

myman_sources = gpgrt.texi

myman_pages = gpg-error-config.1

man_MANS = $(myman_pages)

@CROSS_COMPILING_FALSE@@HAVE_YAT2M_FALSE@YAT2M_CMD = ./yat2m

@CROSS_COMPILING_TRUE@@HAVE_YAT2M_FALSE@YAT2M_CMD = ./yat2m-for-build

@HAVE_YAT2M_TRUE@YAT2M_CMD = $(YAT2M)

@CROSS_COMPILING_FALSE@@HAVE_YAT2M_FALSE@YAT2M_DEP = yat2m

@CROSS_COMPILING_TRUE@@HAVE_YAT2M_FALSE@YAT2M_DEP = yat2m-for-build

@HAVE_YAT2M_TRUE@YAT2M_DEP = $(YAT2M)

all: all-am

.SUFFIXES:

.SUFFIXES: .c .dvi .html .info .lo .o .obj .pdf .ps .texi

$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)

	@for dep in $?; do \

	  case '$(am__configure_deps)' in \

	    *$$dep*) \

	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \

	        && { if test -f $@; then exit 0; else break; fi; }; \

	      exit 1;; \

	  esac; \

	done; \

	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \

	$(am__cd) $(top_srcdir) && \

	  $(AUTOMAKE) --gnu doc/Makefile

.PRECIOUS: Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

	@case '$?' in \

	  *config.status*) \

	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

	  *) \

	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)

	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(am__aclocal_m4_deps):

install-binPROGRAMS: $(bin_PROGRAMS)

	@$(NORMAL_INSTALL)

	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \

	if test -n "$$list"; then \

	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \

	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \

	fi; \

	for p in $$list; do echo "$$p $$p"; done | \

	sed 's/$(EXEEXT)$$//' | \

	while read p p1; do if test -f $$p \

	 || test -f $$p1 \

	  ; then echo "$$p"; echo "$$p"; else :; fi; \

	done | \

	sed -e 'p;s,.*/,,;n;h' \

	    -e 's|.*|.|' \

	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \

	sed 'N;N;N;s,\n, ,g' | \

	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \

	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \

	    if ($$2 == $$4) files[d] = files[d] " " $$1; \

	    else { print "f", $$3 "/" $$4, $$1; } } \

	  END { for (d in files) print "f", d, files[d] }' | \

	while read type dir files; do \

	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \

	    test -z "$$files" || { \

	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \

	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \

	    } \

	; done

uninstall-binPROGRAMS:

	@$(NORMAL_UNINSTALL)

	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \

	files=`for p in $$list; do echo "$$p"; done | \

	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \

	      -e 's/$$/$(EXEEXT)/' \

	`; \

	test -n "$$list" || exit 0; \

	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \

	cd "$(DESTDIR)$(bindir)" && rm -f $$files

clean-binPROGRAMS:

	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \

	echo " rm -f" $$list; \

	rm -f $$list || exit $$?; \

	test -n "$(EXEEXT)" || exit 0; \

	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \

	echo " rm -f" $$list; \

	rm -f $$list

yat2m$(EXEEXT): $(yat2m_OBJECTS) $(yat2m_DEPENDENCIES) $(EXTRA_yat2m_DEPENDENCIES) 

	@rm -f yat2m$(EXEEXT)

	$(AM_V_CCLD)$(yat2m_LINK) $(yat2m_OBJECTS) $(yat2m_LDADD) $(LIBS)

mostlyclean-compile:

	-rm -f *.$(OBJEXT)

distclean-compile:

	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/yat2m-yat2m.Po@am__quote@

.c.o:

@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<

@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@

@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<

.c.obj:

@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`

@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@

@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.c.lo:

@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<

@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo

@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@

@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<

yat2m-yat2m.o: yat2m.c

@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(yat2m_CFLAGS) $(CFLAGS) -MT yat2m-yat2m.o -MD -MP -MF $(DEPDIR)/yat2m-yat2m.Tpo -c -o yat2m-yat2m.o `test -f 'yat2m.c' || echo '$(srcdir)/'`yat2m.c

@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/yat2m-yat2m.Tpo $(DEPDIR)/yat2m-yat2m.Po

@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='yat2m.c' object='yat2m-yat2m.o' libtool=no @AMDEPBACKSLASH@

@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(yat2m_CFLAGS) $(CFLAGS) -c -o yat2m-yat2m.o `test -f 'yat2m.c' || echo '$(srcdir)/'`yat2m.c

yat2m-yat2m.obj: yat2m.c

@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(yat2m_CFLAGS) $(CFLAGS) -MT yat2m-yat2m.obj -MD -MP -MF $(DEPDIR)/yat2m-yat2m.Tpo -c -o yat2m-yat2m.obj `if test -f 'yat2m.c'; then $(CYGPATH_W) 'yat2m.c'; else $(CYGPATH_W) '$(srcdir)/yat2m.c'; fi`

@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/yat2m-yat2m.Tpo $(DEPDIR)/yat2m-yat2m.Po

@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='yat2m.c' object='yat2m-yat2m.obj' libtool=no @AMDEPBACKSLASH@

@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(yat2m_CFLAGS) $(CFLAGS) -c -o yat2m-yat2m.obj `if test -f 'yat2m.c'; then $(CYGPATH_W) 'yat2m.c'; else $(CYGPATH_W) '$(srcdir)/yat2m.c'; fi`

mostlyclean-libtool:

	-rm -f *.lo

clean-libtool:

	-rm -rf .libs _libs

.texi.info:

	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \

	am__cwd=`pwd` && $(am__cd) $(srcdir) && \

	rm -rf $$backupdir && mkdir $$backupdir && \

	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \

	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \

	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \

	  done; \

	else :; fi && \

	cd "$$am__cwd"; \

	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \

	 -o $@ $<; \

	then \

	  rc=0; \

	  $(am__cd) $(srcdir); \

	else \

	  rc=$$?; \

	  $(am__cd) $(srcdir) && \

	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \

	fi; \

	rm -rf $$backupdir; exit $$rc

.texi.dvi:

	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \

	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \

	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \

	$<

.texi.pdf:

	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \

	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \

	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \

	$<

.texi.html:

	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)

	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \

	 -o $(@:.html=.htp) $<; \

	then \

	  rm -rf $@ && mv $(@:.html=.htp) $@; \

	else \

	  rm -rf $(@:.html=.htp); exit 1; \

	fi

$(srcdir)/gpgrt.info: gpgrt.texi $(srcdir)/version.texi $(gpgrt_TEXINFOS)

gpgrt.dvi: gpgrt.texi $(srcdir)/version.texi $(gpgrt_TEXINFOS)

gpgrt.pdf: gpgrt.texi $(srcdir)/version.texi $(gpgrt_TEXINFOS)

gpgrt.html: gpgrt.texi $(srcdir)/version.texi $(gpgrt_TEXINFOS)

$(srcdir)/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/stamp-vti

$(srcdir)/stamp-vti: gpgrt.texi $(top_srcdir)/configure

	@(dir=.; test -f ./gpgrt.texi || dir=$(srcdir); \

	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/gpgrt.texi`; \

	echo "@set UPDATED $$1 $$2 $$3"; \

	echo "@set UPDATED-MONTH $$2 $$3"; \

	echo "@set EDITION $(VERSION)"; \

	echo "@set VERSION $(VERSION)") > vti.tmp

	@cmp -s vti.tmp $(srcdir)/version.texi \

	  || (echo "Updating $(srcdir)/version.texi"; \

	      cp vti.tmp $(srcdir)/version.texi)

	-@rm -f vti.tmp

	@cp $(srcdir)/version.texi $@

mostlyclean-vti:

	-rm -f vti.tmp

maintainer-clean-vti:

@MAINTAINER_MODE_TRUE@	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi

.dvi.ps:

	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \

	$(DVIPS) $(AM_V_texinfo) -o $@ $<

uninstall-dvi-am:

	@$(NORMAL_UNINSTALL)

	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \

	for p in $$list; do \

	  $(am__strip_dir) \

	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \

	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \

	done

uninstall-html-am:

	@$(NORMAL_UNINSTALL)

	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \

	for p in $$list; do \

	  $(am__strip_dir) \

	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \

	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \

	done

uninstall-info-am:

	@$(PRE_UNINSTALL)

	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \

	  list='$(INFO_DEPS)'; \

	  for file in $$list; do \

	    relfile=`echo "$$file" | sed 's|^.*/||'`; \

	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \

	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \

	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \

	  done; \

	else :; fi

	@$(NORMAL_UNINSTALL)

	@list='$(INFO_DEPS)'; \

	for file in $$list; do \

	  relfile=`echo "$$file" | sed 's|^.*/||'`; \

	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \

	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \

	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \

	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \

	   else :; fi); \

	done

uninstall-pdf-am:

	@$(NORMAL_UNINSTALL)

	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \

	for p in $$list; do \

	  $(am__strip_dir) \

	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \

	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \

	done

uninstall-ps-am:

	@$(NORMAL_UNINSTALL)

	@list='$(PSS)'; test -n "$(psdir)" || list=; \

	for p in $$list; do \

	  $(am__strip_dir) \

	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \

	  rm -f "$(DESTDIR)$(psdir)/$$f"; \

	done

dist-info: $(INFO_DEPS)

	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \

	list='$(INFO_DEPS)'; \

	for base in $$list; do \

	  case $$base in \

	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \

	  esac; \

	  if test -f $$base; then d=.; else d=$(srcdir); fi; \

	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \

	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \

	    if test -f $$file; then \

	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \

	      test -f "$(distdir)/$$relfile" || \

		cp -p $$file "$(distdir)/$$relfile"; \

	    else :; fi; \

	  done; \

	done

mostlyclean-aminfo:

	-rm -rf gpgrt.t2d gpgrt.t2p

clean-aminfo:

	-test -z "gpgrt.dvi gpgrt.pdf gpgrt.ps gpgrt.html" \

	|| rm -rf gpgrt.dvi gpgrt.pdf gpgrt.ps gpgrt.html

maintainer-clean-aminfo:

	@list='$(INFO_DEPS)'; for i in $$list; do \

	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \

	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \

	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \

	done

install-man1: $(man_MANS)

	@$(NORMAL_INSTALL)

	@list1=''; \

	list2='$(man_MANS)'; \

	test -n "$(man1dir)" \

	  && test -n "`echo $$list1$$list2`" \

	  || exit 0; \

	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \

	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \

	{ for i in $$list1; do echo "$$i"; done;  \

	if test -n "$$list2"; then \

	  for i in $$list2; do echo "$$i"; done \

	    | sed -n '/\.1[a-z]*$$/p'; \

	fi; \

	} | while read p; do \

	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \

	  echo "$$d$$p"; echo "$$p"; \

	done | \

	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \

	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \

	sed 'N;N;s,\n, ,g' | { \

	list=; while read file base inst; do \

	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \

	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \

	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \

	  fi; \

	done; \

	for i in $$list; do echo "$$i"; done | $(am__base_list) | \

	while read files; do \

	  test -z "$$files" || { \

	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \

	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \

	done; }

uninstall-man1:

	@$(NORMAL_UNINSTALL)

	@list=''; test -n "$(man1dir)" || exit 0; \

	files=`{ for i in $$list; do echo "$$i"; done; \

	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \

	  sed -n '/\.1[a-z]*$$/p'; \

	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \

	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \

	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)

ID: $(am__tagged_files)

	$(am__define_uniq_tagged_files); mkid -fID $$unique

tags: tags-am

TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)

	set x; \

	here=`pwd`; \

	$(am__define_uniq_tagged_files); \

	shift; \

	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \

	  test -n "$$unique" || unique=$$empty_fix; \

	  if test $$# -gt 0; then \

	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

	      "$$@" $$unique; \

	  else \

	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

	      $$unique; \

	  fi; \

	fi

ctags: ctags-am

CTAGS: ctags

ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)

	$(am__define_uniq_tagged_files); \

	test -z "$(CTAGS_ARGS)$$unique" \

	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

	     $$unique

GTAGS:

	here=`$(am__cd) $(top_builddir) && pwd` \

	  && $(am__cd) $(top_srcdir) \

	  && gtags -i $(GTAGS_ARGS) "$$here"

cscopelist: cscopelist-am

cscopelist-am: $(am__tagged_files)

	list='$(am__tagged_files)'; \

	case "$(srcdir)" in \

	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \

	  *) sdir=$(subdir)/$(srcdir) ;; \

	esac; \

	for i in $$list; do \

	  if test -f "$$i"; then \

	    echo "$(subdir)/$$i"; \

	  else \

	    echo "$$sdir/$$i"; \

	  fi; \

	done >> $(top_builddir)/cscope.files

distclean-tags:

	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)

	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

	list='$(DISTFILES)'; \

	  dist_files=`for file in $$list; do echo $$file; done | \

	  sed -e "s|^$$srcdirstrip/||;t" \

	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

	case $$dist_files in \

	  */*) $(MKDIR_P) `echo "$$dist_files" | \

			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

			   sort -u` ;; \

	esac; \

	for file in $$dist_files; do \

	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

	  if test -d $$d/$$file; then \

	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

	    if test -d "$(distdir)/$$file"; then \

	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

	    fi; \

	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

	    fi; \

	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

	  else \

	    test -f "$(distdir)/$$file" \

	    || cp -p $$d/$$file "$(distdir)/$$file" \

	    || exit 1; \

	  fi; \

	done

	$(MAKE) $(AM_MAKEFLAGS) \

	  top_distdir="$(top_distdir)" distdir="$(distdir)" \

	  dist-info

check-am: all-am

check: check-am

all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(MANS)

installdirs:

	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \

	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \

	done

install: install-am

install-exec: install-exec-am

install-data: install-data-am

uninstall: uninstall-am