/*

 * ethtool.h: Defines for Linux ethtool.

 *

 * Copyright (C) 1998 David S. Miller (davem@redhat.com)

 * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>

 * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)

 * Portions Copyright 2002 Intel (eli.kupermann@intel.com,

 *                                christopher.leech@intel.com,

 *                                scott.feldman@intel.com)

 * Portions Copyright (C) Sun Microsystems 2008

 */

#ifndef _LINUX_ETHTOOL_H

#define _LINUX_ETHTOOL_H

#include <linux/types.h>

/* This should work for both 32 and 64 bit userland. */

struct ethtool_cmd {

	__u32	cmd;

	__u32	supported;	/* Features this interface supports */

	__u32	advertising;	/* Features this interface advertises */

	__u16	speed;		/* The forced speed, 10Mb, 100Mb, gigabit */

	__u8	duplex;		/* Duplex, half or full */

	__u8	port;		/* Which connector port */

	__u8	phy_address;

	__u8	transceiver;	/* Which transceiver to use */

	__u8	autoneg;	/* Enable or disable autonegotiation */

	__u8	mdio_support;

	__u32	maxtxpkt;	/* Tx pkts before generating tx int */

	__u32	maxrxpkt;	/* Rx pkts before generating rx int */

	__u16	speed_hi;

	__u8	eth_tp_mdix;

	__u8	reserved2;

	__u32	lp_advertising;	/* Features the link partner advertises */

	__u32	reserved[2];

};

static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,

						__u32 speed)

{

	ep->speed = (__u16)speed;

	ep->speed_hi = (__u16)(speed >> 16);

}

static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)

{

	return (ep->speed_hi << 16) | ep->speed;

}

#define ETHTOOL_BUSINFO_LEN	32

/* these strings are set to whatever the driver author decides... */

struct ethtool_drvinfo {

	__u32	cmd;

	char	driver[32];	/* driver short name, "tulip", "eepro100" */

	char	version[32];	/* driver version string */

	char	fw_version[32];	/* firmware version string, if applicable */

	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */

				/* For PCI devices, use pci_name(pci_dev). */

	char	reserved1[32];

	char	reserved2[12];

	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */

	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */

	__u32	testinfo_len;

	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */

	__u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */

};

#define SOPASS_MAX	6

/* wake-on-lan settings */

struct ethtool_wolinfo {

	__u32	cmd;

	__u32	supported;

	__u32	wolopts;

	__u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */

};

/* for passing single values */

struct ethtool_value {

	__u32	cmd;

	__u32	data;

};

/* for passing big chunks of data */

struct ethtool_regs {

	__u32	cmd;

	__u32	version; /* driver-specific, indicates different chips/revs */

	__u32	len; /* bytes */

	__u8	data[0];

};

/* for passing EEPROM chunks */

struct ethtool_eeprom {

	__u32	cmd;

	__u32	magic;

	__u32	offset; /* in bytes */

	__u32	len; /* in bytes */

	__u8	data[0];

};

/* for configuring coalescing parameters of chip */

struct ethtool_coalesce {

	__u32	cmd;	/* ETHTOOL_{G,S}COALESCE */

	/* How many usecs to delay an RX interrupt after

	 * a packet arrives.  If 0, only rx_max_coalesced_frames

	 * is used.

	 */

	__u32	rx_coalesce_usecs;

	/* How many packets to delay an RX interrupt after

	 * a packet arrives.  If 0, only rx_coalesce_usecs is

	 * used.  It is illegal to set both usecs and max frames

	 * to zero as this would cause RX interrupts to never be

	 * generated.

	 */

	__u32	rx_max_coalesced_frames;

	/* Same as above two parameters, except that these values

	 * apply while an IRQ is being serviced by the host.  Not

	 * all cards support this feature and the values are ignored

	 * in that case.

	 */

	__u32	rx_coalesce_usecs_irq;

	__u32	rx_max_coalesced_frames_irq;

	/* How many usecs to delay a TX interrupt after

	 * a packet is sent.  If 0, only tx_max_coalesced_frames

	 * is used.

	 */

	__u32	tx_coalesce_usecs;

	/* How many packets to delay a TX interrupt after

	 * a packet is sent.  If 0, only tx_coalesce_usecs is

	 * used.  It is illegal to set both usecs and max frames

	 * to zero as this would cause TX interrupts to never be

	 * generated.

	 */

	__u32	tx_max_coalesced_frames;

	/* Same as above two parameters, except that these values

	 * apply while an IRQ is being serviced by the host.  Not

	 * all cards support this feature and the values are ignored

	 * in that case.

	 */

	__u32	tx_coalesce_usecs_irq;

	__u32	tx_max_coalesced_frames_irq;

	/* How many usecs to delay in-memory statistics

	 * block updates.  Some drivers do not have an in-memory

	 * statistic block, and in such cases this value is ignored.

	 * This value must not be zero.

	 */

	__u32	stats_block_coalesce_usecs;

	/* Adaptive RX/TX coalescing is an algorithm implemented by

	 * some drivers to improve latency under low packet rates and

	 * improve throughput under high packet rates.  Some drivers

	 * only implement one of RX or TX adaptive coalescing.  Anything

	 * not implemented by the driver causes these values to be

	 * silently ignored.

	 */

	__u32	use_adaptive_rx_coalesce;

	__u32	use_adaptive_tx_coalesce;

	/* When the packet rate (measured in packets per second)

	 * is below pkt_rate_low, the {rx,tx}_*_low parameters are

	 * used.

	 */

	__u32	pkt_rate_low;

	__u32	rx_coalesce_usecs_low;

	__u32	rx_max_coalesced_frames_low;

	__u32	tx_coalesce_usecs_low;

	__u32	tx_max_coalesced_frames_low;

	/* When the packet rate is below pkt_rate_high but above

	 * pkt_rate_low (both measured in packets per second) the

	 * normal {rx,tx}_* coalescing parameters are used.

	 */

	/* When the packet rate is (measured in packets per second)

	 * is above pkt_rate_high, the {rx,tx}_*_high parameters are

	 * used.

	 */

	__u32	pkt_rate_high;

	__u32	rx_coalesce_usecs_high;

	__u32	rx_max_coalesced_frames_high;

	__u32	tx_coalesce_usecs_high;

	__u32	tx_max_coalesced_frames_high;

	/* How often to do adaptive coalescing packet rate sampling,

	 * measured in seconds.  Must not be zero.

	 */

	__u32	rate_sample_interval;

};

/* for configuring RX/TX ring parameters */

struct ethtool_ringparam {

	__u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */

	/* Read only attributes.  These indicate the maximum number

	 * of pending RX/TX ring entries the driver will allow the

	 * user to set.

	 */

	__u32	rx_max_pending;

	__u32	rx_mini_max_pending;

	__u32	rx_jumbo_max_pending;

	__u32	tx_max_pending;

	/* Values changeable by the user.  The valid values are

	 * in the range 1 to the "*_max_pending" counterpart above.

	 */

	__u32	rx_pending;

	__u32	rx_mini_pending;

	__u32	rx_jumbo_pending;

	__u32	tx_pending;

};

/* for configuring link flow control parameters */

struct ethtool_pauseparam {

	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */

	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg

	 * being true) the user may set 'autonet' here non-zero to have the

	 * pause parameters be auto-negotiated too.  In such a case, the

	 * {rx,tx}_pause values below determine what capabilities are

	 * advertised.

	 *

	 * If 'autoneg' is zero or the link is not being auto-negotiated,

	 * then {rx,tx}_pause force the driver to use/not-use pause

	 * flow control.

	 */

	__u32	autoneg;

	__u32	rx_pause;

	__u32	tx_pause;

};

#define ETH_GSTRING_LEN		32

enum ethtool_stringset {

	ETH_SS_TEST		= 0,

	ETH_SS_STATS,

	ETH_SS_PRIV_FLAGS,

};

/* for passing string sets for data tagging */

struct ethtool_gstrings {

	__u32	cmd;		/* ETHTOOL_GSTRINGS */

	__u32	string_set;	/* string set id e.c. ETH_SS_TEST, etc*/

	__u32	len;		/* number of strings in the string set */

	__u8	data[0];

};

enum ethtool_test_flags {

	ETH_TEST_FL_OFFLINE	= (1 << 0),	/* online / offline */

	ETH_TEST_FL_FAILED	= (1 << 1),	/* test passed / failed */

};

/* for requesting NIC test and getting results*/

struct ethtool_test {

	__u32	cmd;		/* ETHTOOL_TEST */

	__u32	flags;		/* ETH_TEST_FL_xxx */

	__u32	reserved;

	__u32	len;		/* result length, in number of u64 elements */

	__u64	data[0];

};

/* for dumping NIC-specific statistics */

struct ethtool_stats {

	__u32	cmd;		/* ETHTOOL_GSTATS */

	__u32	n_stats;	/* number of u64's being returned */

	__u64	data[0];

};

struct ethtool_perm_addr {

	__u32	cmd;		/* ETHTOOL_GPERMADDR */

	__u32	size;

	__u8	data[0];

};

/* boolean flags controlling per-interface behavior characteristics.

 * When reading, the flag indicates whether or not a certain behavior

 * is enabled/present.  When writing, the flag indicates whether

 * or not the driver should turn on (set) or off (clear) a behavior.

 *

 * Some behaviors may read-only (unconditionally absent or present).

 * If such is the case, return EINVAL in the set-flags operation if the

 * flag differs from the read-only value.

 */

enum ethtool_flags {

	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */

};

/* The following structures are for supporting RX network flow

 * classification configuration. Note, all multibyte fields, e.g.,

 * ip4src, ip4dst, psrc, pdst, spi, etc. are expected to be in network

 * byte order.

 */

struct ethtool_tcpip4_spec {

	__be32	ip4src;

	__be32	ip4dst;

	__be16	psrc;

	__be16	pdst;

	__u8    tos;

};

struct ethtool_ah_espip4_spec {

	__be32	ip4src;

	__be32	ip4dst;

	__be32	spi;

	__u8    tos;

};

struct ethtool_rawip4_spec {

	__be32	ip4src;

	__be32	ip4dst;

	__u8	hdata[64];

};

struct ethtool_ether_spec {

	__be16	ether_type;

	__u8	frame_size;

	__u8	eframe[16];

};

#define	ETH_RX_NFC_IP4	1

#define	ETH_RX_NFC_IP6	2

struct ethtool_usrip4_spec {

	__be32	ip4src;

	__be32	ip4dst;

	__be32	l4_4_bytes;

	__u8    tos;

	__u8    ip_ver;

	__u8    proto;

};

struct ethtool_rx_flow_spec {

	__u32		flow_type;

	union {

		struct ethtool_tcpip4_spec		tcp_ip4_spec;

		struct ethtool_tcpip4_spec		udp_ip4_spec;

		struct ethtool_tcpip4_spec		sctp_ip4_spec;

		struct ethtool_ah_espip4_spec		ah_ip4_spec;

		struct ethtool_ah_espip4_spec		esp_ip4_spec;

		struct ethtool_rawip4_spec		raw_ip4_spec;

		struct ethtool_ether_spec		ether_spec;

		struct ethtool_usrip4_spec		usr_ip4_spec;

		__u8					hdata[64];

	} h_u, m_u; /* entry, mask */

	__u64		ring_cookie;

	__u32		location;

};

struct ethtool_rxnfc {

	__u32				cmd;

	__u32				flow_type;

	/* The rx flow hash value or the rule DB size */

	__u64				data;

	struct ethtool_rx_flow_spec	fs;

	__u32				rule_cnt;

	__u32				rule_locs[0];

};

#define ETHTOOL_FLASH_MAX_FILENAME	128

enum ethtool_flash_op_type {

	ETHTOOL_FLASH_ALL_REGIONS	= 0,

};

/* for passing firmware flashing related parameters */

struct ethtool_flash {

	__u32	cmd;

	__u32	region;

	char	data[ETHTOOL_FLASH_MAX_FILENAME];

};

/* CMDs currently supported */

#define ETHTOOL_GSET		0x00000001 /* Get settings. */

#define ETHTOOL_SSET		0x00000002 /* Set settings. */

#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */

#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */

#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */

#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */

#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */

#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */

#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */

#define ETHTOOL_GLINK		0x0000000a /* Get link status (ethtool_value) */

#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */

#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */

#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */

#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */

#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */

#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */

#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */

#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */

#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */

#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */

#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */

#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */

#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable

					    * (ethtool_value) */

#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable

					    * (ethtool_value). */

#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */

#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */

#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */

#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */

#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */

#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */

#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */

#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */

#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */

#define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */

#define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */

#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */

#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */

#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */

#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */

#define	ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */

#define	ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */

#define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */

#define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */

#define	ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */

#define	ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */

#define	ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */

#define	ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */

#define	ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */

#define	ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */

#define	ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */

#define	ETHTOOL_RESET		0x00000034 /* Reset hardware */

/* compatibility with older code */

#define SPARC_ETH_GSET		ETHTOOL_GSET

#define SPARC_ETH_SSET		ETHTOOL_SSET

/* Indicates what features are supported by the interface. */

#define SUPPORTED_10baseT_Half		(1 << 0)

#define SUPPORTED_10baseT_Full		(1 << 1)

#define SUPPORTED_100baseT_Half		(1 << 2)

#define SUPPORTED_100baseT_Full		(1 << 3)

#define SUPPORTED_1000baseT_Half	(1 << 4)

#define SUPPORTED_1000baseT_Full	(1 << 5)

#define SUPPORTED_Autoneg		(1 << 6)

#define SUPPORTED_TP			(1 << 7)

#define SUPPORTED_AUI			(1 << 8)

#define SUPPORTED_MII			(1 << 9)

#define SUPPORTED_FIBRE			(1 << 10)

#define SUPPORTED_BNC			(1 << 11)

#define SUPPORTED_10000baseT_Full	(1 << 12)

#define SUPPORTED_Pause			(1 << 13)

#define SUPPORTED_Asym_Pause		(1 << 14)

#define SUPPORTED_2500baseX_Full	(1 << 15)

#define SUPPORTED_Backplane		(1 << 16)

#define SUPPORTED_1000baseKX_Full	(1 << 17)

#define SUPPORTED_10000baseKX4_Full	(1 << 18)

#define SUPPORTED_10000baseKR_Full	(1 << 19)

#define SUPPORTED_10000baseR_FEC	(1 << 20)

/* Indicates what features are advertised by the interface. */

#define ADVERTISED_10baseT_Half		(1 << 0)

#define ADVERTISED_10baseT_Full		(1 << 1)

#define ADVERTISED_100baseT_Half	(1 << 2)

#define ADVERTISED_100baseT_Full	(1 << 3)

#define ADVERTISED_1000baseT_Half	(1 << 4)

#define ADVERTISED_1000baseT_Full	(1 << 5)

#define ADVERTISED_Autoneg		(1 << 6)

#define ADVERTISED_TP			(1 << 7)

#define ADVERTISED_AUI			(1 << 8)

#define ADVERTISED_MII			(1 << 9)

#define ADVERTISED_FIBRE		(1 << 10)

#define ADVERTISED_BNC			(1 << 11)

#define ADVERTISED_10000baseT_Full	(1 << 12)

#define ADVERTISED_Pause		(1 << 13)

#define ADVERTISED_Asym_Pause		(1 << 14)

#define ADVERTISED_2500baseX_Full	(1 << 15)

#define ADVERTISED_Backplane		(1 << 16)

#define ADVERTISED_1000baseKX_Full	(1 << 17)

#define ADVERTISED_10000baseKX4_Full	(1 << 18)

#define ADVERTISED_10000baseKR_Full	(1 << 19)

#define ADVERTISED_10000baseR_FEC	(1 << 20)

/* The following are all involved in forcing a particular link

 * mode for the device for setting things.  When getting the

 * devices settings, these indicate the current mode and whether

 * it was foced up into this mode or autonegotiated.

 */

/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */

#define SPEED_10		10

#define SPEED_100		100

#define SPEED_1000		1000

#define SPEED_2500		2500

#define SPEED_10000		10000

/* Duplex, half or full. */

#define DUPLEX_HALF		0x00

#define DUPLEX_FULL		0x01

/* Which connector port. */

#define PORT_TP			0x00

#define PORT_AUI		0x01

#define PORT_MII		0x02

#define PORT_FIBRE		0x03

#define PORT_BNC		0x04

#define PORT_DA			0x05

#define PORT_NONE		0xef

#define PORT_OTHER		0xff

/* Which transceiver to use. */

#define XCVR_INTERNAL		0x00

#define XCVR_EXTERNAL		0x01

#define XCVR_DUMMY1		0x02

#define XCVR_DUMMY2		0x03

#define XCVR_DUMMY3		0x04

/* Enable or disable autonegotiation.  If this is set to enable,

 * the forced link modes above are completely ignored.

 */

#define AUTONEG_DISABLE		0x00

#define AUTONEG_ENABLE		0x01

/* Mode MDI or MDI-X */

#define ETH_TP_MDI_INVALID	0x00

#define ETH_TP_MDI		0x01

#define ETH_TP_MDI_X		0x02

/* Wake-On-Lan options. */

#define WAKE_PHY		(1 << 0)

#define WAKE_UCAST		(1 << 1)

#define WAKE_MCAST		(1 << 2)

#define WAKE_BCAST		(1 << 3)

#define WAKE_ARP		(1 << 4)

#define WAKE_MAGIC		(1 << 5)

#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */

/* L3-L4 network traffic flow types */

#define	TCP_V4_FLOW	0x01

#define	UDP_V4_FLOW	0x02

#define	SCTP_V4_FLOW	0x03

#define	AH_ESP_V4_FLOW	0x04

#define	TCP_V6_FLOW	0x05

#define	UDP_V6_FLOW	0x06

#define	SCTP_V6_FLOW	0x07

#define	AH_ESP_V6_FLOW	0x08

#define	AH_V4_FLOW	0x09

#define	ESP_V4_FLOW	0x0a

#define	AH_V6_FLOW	0x0b

#define	ESP_V6_FLOW	0x0c

#define	IP_USER_FLOW	0x0d

#define IPV4_FLOW       0x10

#define IPV6_FLOW       0x11

/* L3-L4 network traffic flow hash options */

#define	RXH_L2DA	(1 << 1)

#define	RXH_VLAN	(1 << 2)

#define	RXH_L3_PROTO	(1 << 3)

#define	RXH_IP_SRC	(1 << 4)

#define	RXH_IP_DST	(1 << 5)

#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */

#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */

#define	RXH_DISCARD	(1 << 31)

#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL

/* Reset flags */

/* The reset() operation must clear the flags for the components which

 * were actually reset.  On successful return, the flags indicate the

 * components which were not reset, either because they do not exist

 * in the hardware or because they cannot be reset independently.  The

 * driver must never reset any components that were not requested.

 */

enum ethtool_reset_flags {

	/* These flags represent components dedicated to the interface

	 * the command is addressed to.  Shift any flag left by

	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the

	 * same type.

	 */

	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */

	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */

	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */

	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */

	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */

	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */

	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */

	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between

						 * multiple components */

	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to

						 * this interface */

	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this

						 * interface, even if shared */

};

#define ETH_RESET_SHARED_SHIFT	16

#endif /* _LINUX_ETHTOOL_H */