|
Packit |
eace71 |
Description of iface attributes and their valid values
|
|
Packit |
eace71 |
======================================================
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
== IPv4 attributes ==
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
ipaddress
|
|
Packit |
eace71 |
---------
|
|
Packit |
eace71 |
IP address in format XXX.XXX.XXX.XXX
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
gateway
|
|
Packit |
eace71 |
-------
|
|
Packit |
eace71 |
IP address of the network router or gateway device in format XXX.XXX.XXX.XXX
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
subnet
|
|
Packit |
eace71 |
------
|
|
Packit |
eace71 |
Broadcast address in format XXX.XXX.XXX.XXX
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
bootproto
|
|
Packit |
eace71 |
---------
|
|
Packit |
eace71 |
The protocol type used to initialize interface
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "dhcp" or "static"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
dhcp_dns_address_en
|
|
Packit |
eace71 |
-------------------
|
|
Packit |
eace71 |
Request DNS Server IP Addresses and Domain Name
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
If bootproto is set to dhcp and dhcp_dns_address_en is enable,
|
|
Packit |
eace71 |
requests DNS addresses (option 6) and domain name (option 15) in its
|
|
Packit |
eace71 |
DHCP parameter request list.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
dhcp_slp_da_info_en
|
|
Packit |
eace71 |
-------------------
|
|
Packit |
eace71 |
Request SLP DA Information and SLP Scope
|
|
Packit |
eace71 |
If bootproto is set to dhcp and dhcp_slp_da_info_en is enable,
|
|
Packit |
eace71 |
requests SLP DA information (option 78) and SLP scope (option 79)
|
|
Packit |
eace71 |
in its DHCP parameter request list.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
tos_en
|
|
Packit |
eace71 |
------
|
|
Packit |
eace71 |
Enable IPv4 type of service (ToS)
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
When tos_en is set to enable, use value set in tos when transmitting IPv4 TCP
|
|
Packit |
eace71 |
packets on iSCSI connections.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
tos
|
|
Packit |
eace71 |
---
|
|
Packit |
eace71 |
IPv4 Type of service (ToS)
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
When tos_en is set to enable, use value set in tos when transmitting IPv4 TCP
|
|
Packit |
eace71 |
packets on iSCSI connections.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 8-bit value. [0-255]
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
grat_arp_en
|
|
Packit |
eace71 |
-----------
|
|
Packit |
eace71 |
Enable Gratuitous ARP Requests
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
dhcp_alt_client_id_en
|
|
Packit |
eace71 |
---------------------
|
|
Packit |
eace71 |
DHCP Use Alternate Client ID
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
When dhcp_alt_client_id_en is set to enable, use the Client ID configured in
|
|
Packit |
eace71 |
dhcp_alt_client_id as its Client ID (DHCP option 61) in outgoing DHCP messages.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
dhcp_alt_client_id
|
|
Packit |
eace71 |
------------------
|
|
Packit |
eace71 |
DHCP Alternate Client ID
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
When dhcp_alt_client_id_en is set to enable, use value set in dhcp_alt_client_id
|
|
Packit |
eace71 |
for Client ID in DHCP messages.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: 11-byte Client ID
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
dhcp_req_vendor_id_en
|
|
Packit |
eace71 |
---------------------
|
|
Packit |
eace71 |
DHCP Require Vendor ID
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
When dhcp_req_vendor_id_en is set to enable, use value set in dhcp_vendor_id as
|
|
Packit |
eace71 |
its vendor ID (DHCP option 60) in outgoing DHCP messages.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
dhcp_use_vendor_id_en
|
|
Packit |
eace71 |
---------------------
|
|
Packit |
eace71 |
DHCP Use Vendor ID
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
When dhcp_use_vendor_id_en is set to enable, use value set in dhcp_vendor_id as
|
|
Packit |
eace71 |
its vendor ID (DHCP option 60) in outgoing DHCP messages.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
dhcp_vendor_id
|
|
Packit |
eace71 |
--------------
|
|
Packit |
eace71 |
DHCP Vendor ID
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
When dhcp_req_vendor_id_en or dhcp_use_vendor_id_en is set to enable,
|
|
Packit |
eace71 |
use value set in dhcp_vendor_id for Vendor ID in DHCP messages.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: 11-byte Client ID
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
dhcp_learn_iqn_en
|
|
Packit |
eace71 |
-----------------
|
|
Packit |
eace71 |
DHCP Learn IQN
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
When dhcp_learn_iqn_en is set to enable, iSCSI initiator attempts to use DHCP
|
|
Packit |
eace71 |
to learn its (IQN) iSCSI name.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
fragment_disable
|
|
Packit |
eace71 |
----------------
|
|
Packit |
eace71 |
Fragmentation Disable.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
When fragment_disable is set to disable, iSCSI initiator cannot fragment IP
|
|
Packit |
eace71 |
datagrams.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
incoming_forwarding_en
|
|
Packit |
eace71 |
----------------------
|
|
Packit |
eace71 |
When incoming_forwarding_en is set to enable, iSCSI initiator forwards all
|
|
Packit |
eace71 |
incoming network traffic to the network driver, except for iSCSI TCP packets
|
|
Packit |
eace71 |
destined to the iSCSI initiator.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
ttl
|
|
Packit |
eace71 |
---
|
|
Packit |
eace71 |
IPv4 Time to Live (TTL)
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
This attribute contain TTL value sent in IPv4 TCP packets transmitted on
|
|
Packit |
eace71 |
iSCSI connections.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 8-bit value. [0-255]
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
== IPv6 attributes ==
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
ipaddress
|
|
Packit |
eace71 |
---------
|
|
Packit |
eace71 |
IP address in IPv6 format.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
link_local_addr
|
|
Packit |
eace71 |
---------------
|
|
Packit |
eace71 |
Link local address in IPv6 format.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
router_addr
|
|
Packit |
eace71 |
-----------
|
|
Packit |
eace71 |
Router address in IPv6 format.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
ipaddr_autocfg
|
|
Packit |
eace71 |
--------------
|
|
Packit |
eace71 |
Autoconfigure IPv6 Address.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: nd, dhcpv6 or disable
|
|
Packit |
eace71 |
qla4xxx don't support dhcpv6.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
link_local_autocfg
|
|
Packit |
eace71 |
------------------
|
|
Packit |
eace71 |
Autoconfigure IPv6 Link Local Address.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
IPv6 neighbor discovery protocol to discover Link Local Address.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: auto or disable
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
router_autocfg
|
|
Packit |
eace71 |
--------------
|
|
Packit |
eace71 |
Autoconfigure IPv6 Router address.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
IPv6 neighbor discovery protocol to discover a default router address.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: auto or disable
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
link_local_state
|
|
Packit |
eace71 |
----------------
|
|
Packit |
eace71 |
This Read-only attribute show Link Local IP address state in sysfs.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: Unconfigured, Acquiring, Tentative, Valid, Disabling, Invalid,
|
|
Packit |
eace71 |
Deprecated.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
router_state
|
|
Packit |
eace71 |
------------
|
|
Packit |
eace71 |
This Read-only attribute shows router state.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: Unknown, Advertised, Manual, Stale.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
grat_neighbor_adv_en
|
|
Packit |
eace71 |
--------------------
|
|
Packit |
eace71 |
Enable Gratuitous Neighbor Advertisement
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
mld_en
|
|
Packit |
eace71 |
------
|
|
Packit |
eace71 |
Enable IPv6 Multicast Listener Discovery
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
flow_label
|
|
Packit |
eace71 |
----------
|
|
Packit |
eace71 |
This attribute specifies the default value of the Flow Label field in the
|
|
Packit |
eace71 |
IPv6 header of TCP packets transmitted on iSCSI connections
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 20-bit value. [0-1048575]
|
|
Packit |
eace71 |
Value zero indicates that the traffic is not assigned to a labelled flow.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
traffic_class
|
|
Packit |
eace71 |
-------------
|
|
Packit |
eace71 |
This attribute specifies the IPv6 traffic class value to be used in IPv6
|
|
Packit |
eace71 |
TCP packets transmitted from the firmware on iSCSI connections.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 8-bit value. [0-255]
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
hop_limit
|
|
Packit |
eace71 |
---------
|
|
Packit |
eace71 |
This attribute specifies the IPv6 hop limit value to be used in IPv6 TCP
|
|
Packit |
eace71 |
packets transmitted from the firmware on iSCSI connections
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 8-bit value. [0-255]
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
nd_reachable_tmo
|
|
Packit |
eace71 |
----------------
|
|
Packit |
eace71 |
This attribute specifies the time (in milliseconds) that a node assumes
|
|
Packit |
eace71 |
that the neighbor is reachable after confirmation.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 4-byte value. [0-4294967295]
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
nd_rexmit_time
|
|
Packit |
eace71 |
--------------
|
|
Packit |
eace71 |
This attribute specifies the time (in milliseconds) between retransmitted
|
|
Packit |
eace71 |
neighbor solicitation messages.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 4-byte value. [0-4294967295]
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
nd_stale_tmo
|
|
Packit |
eace71 |
------------
|
|
Packit |
eace71 |
This attribute specifies the time (in milliseconds) after which a stale
|
|
Packit |
eace71 |
neighbor or destination cache entry is discarded.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 4-byte value. [0-4294967295]
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
dup_addr_detect_cnt
|
|
Packit |
eace71 |
-------------------
|
|
Packit |
eace71 |
This attribute specifies the IPv6 duplicate address detection count
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 8-bit value. [0-255]
|
|
Packit |
eace71 |
0 - Disable
|
|
Packit |
eace71 |
1 - TryOnce
|
|
Packit |
eace71 |
2 - TryTwice, and so on
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
router_adv_link_mtu
|
|
Packit |
eace71 |
-------------------
|
|
Packit |
eace71 |
IPv6 Router Advertised Link MTU Size.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 1280 bytes to 1500 bytes
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
== Common ==
|
|
Packit |
eace71 |
enabled
|
|
Packit |
eace71 |
-------
|
|
Packit |
eace71 |
This attribute is used to enable or disable IPv4 or IPv6 protocol.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
vlan_id
|
|
Packit |
eace71 |
-------
|
|
Packit |
eace71 |
This attribute specifies 12-bit VLAN identifier (VID)
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 12-bit value. [1-4094]
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
vlan_priority
|
|
Packit |
eace71 |
-------------
|
|
Packit |
eace71 |
This attribute specifies Priority to outbound packets containing the
|
|
Packit |
eace71 |
specified VLAN-ID (VID)
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 3-bit value. [0-7]
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
vlan_enabled
|
|
Packit |
eace71 |
------------
|
|
Packit |
eace71 |
VLAN Tagging Enable.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
When this attribute is set to enable, use value set in vlan_id and
|
|
Packit |
eace71 |
vlan_priority to transmit IP packets, and discards IP packets that were
|
|
Packit |
eace71 |
received without a matching VLAN ID
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
mtu
|
|
Packit |
eace71 |
---
|
|
Packit |
eace71 |
Ethernet MTU Size.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
This field specifies the maximum payload length in byte of an
|
|
Packit |
eace71 |
Ethernet frame supported by iSCSI initiator.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: 576 bytes to 9000 bytes
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
port
|
|
Packit |
eace71 |
----
|
|
Packit |
eace71 |
This attribute shows the initiator iSCSI port number.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
ipaddress_state
|
|
Packit |
eace71 |
---------------
|
|
Packit |
eace71 |
This Read-only attribute show IP address state.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: Unconfigured, Acquiring, Tentative, Valid, Disabling, Invalid,
|
|
Packit |
eace71 |
Deprecated.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
delayed_ack_en
|
|
Packit |
eace71 |
--------------
|
|
Packit |
eace71 |
When this attribute is set to enable, TCP delayed ACK is enabled.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
tcp_nagle_disable
|
|
Packit |
eace71 |
-----------------
|
|
Packit |
eace71 |
When this attribute is set to disable, TCP Nagle algorithm is disabled.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
tcp_wsf_disable
|
|
Packit |
eace71 |
---------------
|
|
Packit |
eace71 |
When this attribute is set to disable, TCP window scale is disabled.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
tcp_wsf
|
|
Packit |
eace71 |
-------
|
|
Packit |
eace71 |
This attribute specifies the TCP window scale factor to be negotiated
|
|
Packit |
eace71 |
on TCP connections.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 8-bit value. [0-255]
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
tcp_timer_scale
|
|
Packit |
eace71 |
---------------
|
|
Packit |
eace71 |
The TCP Timer Scale is scale factor that adjusts the time interval between
|
|
Packit |
eace71 |
timer ticks on a TCP connection. The scale factor allows for faster time-outs
|
|
Packit |
eace71 |
for connections running on a very small network, versus connections running
|
|
Packit |
eace71 |
on a very large network.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 3-bit value. [0-7]
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
tcp_timestamp_en
|
|
Packit |
eace71 |
----------------
|
|
Packit |
eace71 |
When this attribute is set to enable, iSCSI initiator negotiates to use time
|
|
Packit |
eace71 |
stamps in TCP headers
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
cache_id
|
|
Packit |
eace71 |
--------
|
|
Packit |
eace71 |
This Read-only attribute is used to find the valid cache entries for the
|
|
Packit |
eace71 |
interface.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
For IPv4, ARP cache entry
|
|
Packit |
eace71 |
For IPv6, Neighbor cache entry
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
redirect_en
|
|
Packit |
eace71 |
-----------
|
|
Packit |
eace71 |
For IPv4:
|
|
Packit |
eace71 |
When this attribute is set to enable, an ARP redirect can modify the address
|
|
Packit |
eace71 |
resolution protocol (ARP) table and any active connections.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
For IPv6:
|
|
Packit |
eace71 |
When this attribute is set to enable and neighbor advertisements are received,
|
|
Packit |
eace71 |
the connection table is examined and updated if any active connections match
|
|
Packit |
eace71 |
the IP address on the neighbor advertisement. This action is required for
|
|
Packit |
eace71 |
failover and redirect.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
def_taskmgmt_tmo
|
|
Packit |
eace71 |
----------------
|
|
Packit |
eace71 |
This attribute specifies timeout interval in seconds that iSCSI uses for
|
|
Packit |
eace71 |
timing out task-management commands.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid range: 16-bit value [0-65535].
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
header_digest
|
|
Packit |
eace71 |
-------------
|
|
Packit |
eace71 |
When this attribute is set to enable iSCSI initiator negotiates for
|
|
Packit |
eace71 |
HeaderDigest=CRC32 and when set to disable negotiates HeaderDigest=none.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
data_digest
|
|
Packit |
eace71 |
-----------
|
|
Packit |
eace71 |
When this attribute is set to enable iSCSI initiator negotiates for
|
|
Packit |
eace71 |
DataDigest=CRC32 and when set to disable negotiates DataDigest=none.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
immediate_data
|
|
Packit |
eace71 |
--------------
|
|
Packit |
eace71 |
When this attribute is set to enable iSCSI initiator negotiates for
|
|
Packit |
eace71 |
ImmediateData=yes and When set to disable negotiates ImmediateData=none
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
initial_r2t
|
|
Packit |
eace71 |
-----------
|
|
Packit |
eace71 |
When this attribute is set to enable iSCSI initiator negotiates for
|
|
Packit |
eace71 |
InitialR2T=yes. When set to disable negotiates InitialR2T=no.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
data_seq_in_order
|
|
Packit |
eace71 |
-----------------
|
|
Packit |
eace71 |
When this attribute is set to enable iSCSI initiator set data sequences
|
|
Packit |
eace71 |
in order
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
qla4xxx does not support out-of-order data sequences
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
data_pdu_in_order
|
|
Packit |
eace71 |
-----------------
|
|
Packit |
eace71 |
When this attribute is set to enable iSCSI initiator set Data PDU
|
|
Packit |
eace71 |
in order
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
qla4xxx does not support out-of-order Data PDUs.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
erl
|
|
Packit |
eace71 |
---
|
|
Packit |
eace71 |
Error Recovery Level
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
This attribute specifies error recovery level (ERL) supported by the
|
|
Packit |
eace71 |
connection.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: 2-bit value [0-2]
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
max_recv_dlength
|
|
Packit |
eace71 |
----------------
|
|
Packit |
eace71 |
iSCSI Maximum Receive Data Segment Length.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
This attribute specifies Maximum data segment length in bytes, that receive
|
|
Packit |
eace71 |
in an iSCSI PDU.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
first_burst_len
|
|
Packit |
eace71 |
---------------
|
|
Packit |
eace71 |
iSCSI First Burst Length
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
This attribute Specifies the maximum amount of unsolicited data an iSCSI
|
|
Packit |
eace71 |
initiator can send to the target during the execution of a single SCSI command,
|
|
Packit |
eace71 |
in bytes.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
max_outstanding_r2t
|
|
Packit |
eace71 |
-------------------
|
|
Packit |
eace71 |
iSCSI Maximum Outstanding R2T
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
This attribute Specifies how many R2T PDUs per command can be outstanding
|
|
Packit |
eace71 |
during an iSCSI session.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
max_burst_len
|
|
Packit |
eace71 |
-------------
|
|
Packit |
eace71 |
This attribute Specifies the maximum length for unsolicited or immediate data
|
|
Packit |
eace71 |
iSCSI session can send or receive.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
chap_auth
|
|
Packit |
eace71 |
---------
|
|
Packit |
eace71 |
When this attribute is set to enable iSCSI session performs authentication
|
|
Packit |
eace71 |
during the security state of login phase.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
bidi_chap
|
|
Packit |
eace71 |
---------
|
|
Packit |
eace71 |
When this attribute is set to enable iSCSI session generates a CHAP challenge
|
|
Packit |
eace71 |
to any target that has issued a CHAP challenge to the iSCSI session.
|
|
Packit |
eace71 |
iSCSI session issues the challenge to the target after responding to the
|
|
Packit |
eace71 |
targets challenge. This attribute is ignored if chap_auth is set to disable.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
discovery_auth_optional
|
|
Packit |
eace71 |
-----------------------
|
|
Packit |
eace71 |
When this attribute is set to enable and the chap_auth is set to enable,
|
|
Packit |
eace71 |
iSCSI session does not require authentication on discovery sessions unless
|
|
Packit |
eace71 |
requested by the peer. When this attribute is set to disable iSCSI session
|
|
Packit |
eace71 |
requires CHAP authentication for a discovery session.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
discovery_logout
|
|
Packit |
eace71 |
----------------
|
|
Packit |
eace71 |
When this attribute is set to enable, iSCSI initiator initiates an iSCSI logout
|
|
Packit |
eace71 |
on a discovery session when discovery is complete (before closing the connection).
|
|
Packit |
eace71 |
When this attribute is set to disable, iSCSI initiator closes the connection when
|
|
Packit |
eace71 |
discovery is complete.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
strict_login_comp_en
|
|
Packit |
eace71 |
--------------------
|
|
Packit |
eace71 |
When this attribute is set to enable, iSCSI initiator enforces the iSCSI login
|
|
Packit |
eace71 |
negotiation rules. When this attribute is set to disable, iSCSI initiator does
|
|
Packit |
eace71 |
not enforce iSCSI login negotiation.
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
Valid values: "enable" or "disable"
|
|
Packit |
eace71 |
|
|
Packit |
eace71 |
initiator_name
|
|
Packit |
eace71 |
--------------
|
|
Packit |
eace71 |
This Read-only attribute contains the iSCSI Name string used by the firmware.
|