Blob Blame History Raw
.TH DCB-ETS 8 "6 December 2020" "iproute2" "Linux"
.SH NAME
dcb-app \- show / manipulate application priority table of
the DCB (Data Center Bridging) subsystem
.SH SYNOPSIS
.sp
.ad l
.in +8

.ti -8
.B dcb
.RI "[ " OPTIONS " ] "
.B app
.RI "{ " COMMAND " | " help " }"
.sp

.ti -8
.B dcb app " { " show " | " flush " } " dev
.RI DEV
.RB "[ " default-prio " ]"
.RB "[ " ethtype-prio " ]"
.RB "[ " stream-port-prio " ]"
.RB "[ " dgram-port-prio " ]"
.RB "[ " port-prio " ]"
.RB "[ " dscp-prio " ]"

.ti -8
.B dcb ets " { " add " | " del " | " replace " } " dev
.RI DEV
.RB "[ " default-prio " " \fIPRIO-LIST\fB " ]"
.RB "[ " ethtype-prio " " \fIET-MAP\fB " ]"
.RB "[ " stream-port-prio " " \fIPORT-MAP\fB " ]"
.RB "[ " dgram-port-prio " " \fIPORT-MAP\fB " ]"
.RB "[ " port-prio " " \fIPORT-MAP\fB " ]"
.RB "[ " dscp-prio " " \fIDSCP-MAP\fB " ]"

.ti -8
.IR PRIO-LIST " := [ " PRIO-LIST " ] " PRIO

.ti -8
.IR ET-MAP " := [ " ET-MAP " ] " ET-MAPPING

.ti -8
.IR ET-MAPPING " := " ET\fB:\fIPRIO\fR

.ti -8
.IR PORT-MAP " := [ " PORT-MAP " ] " PORT-MAPPING

.ti -8
.IR PORT-MAPPING " := " PORT\fB:\fIPRIO\fR

.ti -8
.IR DSCP-MAP " := [ " DSCP-MAP " ] " DSCP-MAPPING

.ti -8
.IR DSCP-MAPPING " := { " DSCP " | " \fBall " }" \fB:\fIPRIO\fR

.ti -8
.IR ET " := { " \fB0x600\fR " .. " \fB0xffff\fR " }"

.ti -8
.IR PORT " := { " \fB1\fR " .. " \fB65535\fR " }"

.ti -8
.IR DSCP " := { " \fB0\fR " .. " \fB63\fR " }"

.ti -8
.IR PRIO " := { " \fB0\fR " .. " \fB7\fR " }"

.SH DESCRIPTION

.B dcb app
is used to configure APP table, or application priority table in the DCB (Data
Center Bridging) subsystem. The APP table is used to assign priority to traffic
based on value in one of several headers: EtherType, L4 destination port, or
DSCP. It also allows configuration of port-default priority that is chosen if no
other prioritization rule applies.

DCB APP entries are 3-tuples of selector, protocol ID, and priority. Selector is
an enumeration that picks one of the prioritization namespaces. Currently it
mostly corresponds to configurable parameters described below. Protocol ID is a
value in the selector namespace. E.g. for EtherType selector, protocol IDs are
the individual EtherTypes, for DSCP they are individual code points. The
priority is the priority that should be assigned to traffic that matches the
selector and protocol ID.

The APP table is a set of DCB APP entries. The only requirement is that
duplicate entries are not added. Notably, it is valid to have conflicting
priority assignment for the same selector and protocol ID. For example, the set
of two APP entries (DSCP, 10, 1) and (DSCP, 10, 2), where packets with DSCP of
10 should get priority of both 1 and 2, form a well-defined APP table. The
.B dcb app
tool allows low-level management of the app table by adding and deleting
individual APP 3-tuples through
.B add
and
.B del
commands. On the other other hand, the command
.B replace
does what one would typically want in this situation--first adds the new
configuration, and then removes the obsolete one, so that only one
prioritization is in effect for a given selector and protocol ID.

.SH COMMANDS

.TP
.B show
Display all entries with a given selector. When no selector is given, shows all
APP table entries categorized per selector.

.TP
.B flush
Remove all entries with a given selector. When no selector is given, removes all
APP table entries.

.TP
.B add
.TQ
.B del
Add and, respectively, remove individual APP 3-tuples to and from the DCB APP
table.

.TP
.B replace
Take the list of entries mentioned as parameter, and add those that are not
present in the APP table yet. Then remove those entries, whose selector and
protocol ID have been mentioned as parameter, but not with the exact same
priority. This has the effect of, for the given selector and protocol ID,
causing that the table only contains the priority (or priorities) given as
parameter.

.SH PARAMETERS

The following table shows parameters in a way that they would be used with
\fBadd\fR, \fBdel\fR and \fBreplace\fR commands. For \fBshow\fR and \fBflush\fR,
the parameter name is to be used as a simple keyword without further arguments.

.TP
.B default-prio \fIPRIO-LIST
The priority to be used for traffic the priority of which is otherwise
unspecified. The argument is a list of individual priorities. Note that
.B default-prio
rules are configured as triplets (\fBEtherType\fR, \fB0\fR, \fIPRIO\fR).
.B dcb app
translates these rules to the symbolic name
.B default-prio
and back.

.TP
.B ethtype-prio \fIET-MAP
\fIET-MAP\fR uses the array parameter syntax, see
.BR dcb (8)
for details. Keys are EtherType values. Values are priorities to be assigned to
traffic with the matching EtherType.

.TP
.B stream-port-prio \fIPORT-MAP
.TQ
.B dgram-port-prio \fIPORT-MAP
.TQ
.B port-prio \fIPORT-MAP
\fIPORT-MAP\fR uses the array parameter syntax, see
.BR dcb (8)
for details. Keys are L4 destination port numbers that match on, respectively,
TCP and SCTP traffic, UDP and DCCP traffic, and either of those. Values are
priorities that should be assigned to matching traffic.

.TP
.B dscp-prio \fIDSCP-MAP
\fIDSCP-MAP\fR uses the array parameter syntax, see
.BR dcb (8)
for details. Keys are DSCP points, values are priorities assigned to
traffic with matching DSCP. DSCP points can be written either direcly as
numeric values, or using symbolic names specified in
.B /etc/iproute2/rt_dsfield
(however note that that file specifies full 8-bit dsfield values, whereas
.B dcb app
will only use the higher six bits).
.B dcb app show
will similarly format DSCP values as symbolic names if possible. The
command line option
.B -N
turns the show translation off.

.SH EXAMPLE & USAGE

Prioritize traffic with DSCP 0 to priority 0, 24 to 3 and 48 to 6:

.P
# dcb app add dev eth0 dscp-prio 0:0 24:3 48:6

Add another rule to configure DSCP 24 to priority 2 and show the result:

.P
# dcb app add dev eth0 dscp-prio 24:2
.br
# dcb app show dev eth0 dscp-prio
.br
dscp-prio 0:0 CS3:2 CS3:3 CS6:6
.br
# dcb -N app show dev eth0 dscp-prio
.br
dscp-prio 0:0 24:2 24:3 48:6

Reconfigure the table so that the only rule for DSCP 24 is for assignment of
priority 4:

.P
# dcb app replace dev eth0 dscp-prio 24:4
.br
# dcb app show dev eth0 dscp-prio
.br
dscp-prio 0:0 24:4 48:6

Flush all DSCP rules:

.P
# dcb app flush dev eth0 dscp-prio
.br
# dcb app show dev eth0 dscp-prio
.br
(nothing)

.SH EXIT STATUS
Exit status is 0 if command was successful or a positive integer upon failure.

.SH SEE ALSO
.BR dcb (8)

.SH REPORTING BUGS
Report any bugs to the Network Developers mailing list
.B <netdev@vger.kernel.org>
where the development and maintenance is primarily done.
You do not have to be subscribed to the list to send a message there.

.SH AUTHOR
Petr Machata <me@pmachata.org>