/*
* Copyright (c) 2004 Sun Microsystems, Inc. All Rights Reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistribution of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistribution in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* Neither the name of Sun Microsystems, Inc. or the names of
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* This software is provided "AS IS," without a warranty of any kind.
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
* INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
* SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
* FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
* OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL
* SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
* OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
* PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
* LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
* EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef _BMC_INTF_H
#define _BMC_INTF_H
#pragma ident "@(#)bmc_intf.h 1.2 05/03/07 SMI"
#ifdef __cplusplus
extern "C" {
#endif
#define BMC_SUCCESS 0x0
#define BMC_FAILURE 0x1
#define BMC_NETFN_CHASSIS 0x0
#define BMC_NETFN_BRIDGE 0x2
#define BMC_NETFN_SE 0x4
#define BMC_NETFN_APP 0x6
#define BMC_NETFN_FIRMWARE 0x8
#define BMC_NETFN_STORAGE 0xa
#define BMC_NETFN_TRANSPORT 0xc
#define SEND_MAX_PAYLOAD_SIZE 34 /* MAX payload */
#define RECV_MAX_PAYLOAD_SIZE 33 /* MAX payload */
#define BMC_MIN_RESPONSE_SIZE 3
#define BMC_MIN_REQUEST_SIZE 2
#define BMC_MAX_RESPONSE_SIZE (BMC_MIN_RESPONSE_SIZE + RECV_MAX_PAYLOAD_SIZE)
#define BMC_MAX_REQUEST_SIZE (BMC_MIN_REQUEST_SIZE + BMC_MAX_RESPONSE_SIZE)
#define BUF_SIZE 256
#define MAX_BUF_SIZE 256
/*
* Useful macros
*/
#define FORM_NETFNLUN(net, lun) ((((net) << 2) | ((lun) & 0x3)))
#define GET_NETFN(netfn) (((netfn) >> 2) & 0x3f)
#define GET_LUN(netfn) (netfn & 0x3)
#define RESP_NETFN(nflun) ((nflun) | 1)
#define ISREQUEST(nl) (((nl) & 1) == 0) /* test for request */
#define ISRESPONSE(nl) (((nl) & 1) == 1) /* test for response */
/* for checking BMC specific stuff */
#define BMC_GET_DEVICE_ID 0x1 /* GET DEVICE ID COMMAND */
#define BMC_IPMI_15_VER 0x51 /* IPMI 1.5 definion */
/* BMC Completion Code and OEM Completion Code */
#define BMC_IPMI_UNSPECIFIC_ERROR 0xFF /* Unspecific Error */
#define BMC_IPMI_INVALID_COMMAND 0xC1 /* Invalid Command */
#define BMC_IPMI_COMMAND_TIMEOUT 0xC3 /* Command Timeout */
#define BMC_IPMI_DATA_LENGTH_EXCEED 0xC8 /* DataLength exceeded limit */
#define BMC_IPMI_OEM_FAILURE_SENDBMC 0x7E /* Cannot send BMC req */
#define IOCTL_IPMI_KCS_ACTION 0x01
#define IOCTL_IPMI_INTERFACE_METHOD 0x02
/* Interface methods returned from IOCTL_IPMI_INTERFACE_METHOD ioctl: */
#define BMC_IOCTL_METHOD 0 /* Not returned from ioctl, */
/* but can be used by */
/* applications that want to */
/* compare against an */
/* alternative method. */
#define BMC_PUTMSG_METHOD 1
/*
* bmc_req_t is the data structure to send
* request packet from applications to the driver
* module.
*
* the request pkt is mainly for KCS-interface-BMC
* messages. Since the system interface is session-less
* connections, the packet won't have any session
* information.
*
* the data payload will be 2 bytes less than max
* BMC supported packet size.
* the address of the responder is always BMC and so
* rsSa field is not required.
*/
typedef struct bmc_req {
uint8_t fn; /* netFn for command */
uint8_t lun; /* logical unit on responder */
uint8_t cmd; /* command */
uint8_t datalength; /* length of following data */
uint8_t data[SEND_MAX_PAYLOAD_SIZE]; /* request data */
} bmc_req_t;
/*
* bmc_rsp_t is the data structure to send
* respond packet from applications to the driver
* module.
*
* the respond pkt is mainly for KCS-interface-BMC
* messages. Since the system interface is session-less
* connections, the packet won't have any session
* information.
*
* the data payload will be 2 bytes less than max
* BMC supported packet size.
*/
typedef struct bmc_rsp {
uint8_t fn; /* netFn for command */
uint8_t lun; /* logical unit on responder */
uint8_t cmd; /* command */
uint8_t ccode; /* completion code */
uint8_t datalength; /* Length */
uint8_t data[RECV_MAX_PAYLOAD_SIZE]; /* response */
} bmc_rsp_t;
/*
* the data structure for synchronous operation via ioctl (DEPRECATED)
*/
typedef struct bmc_reqrsp {
bmc_req_t req; /* request half */
bmc_rsp_t rsp; /* response half */
} bmc_reqrsp_t;
/*
* The new way of communicating with the bmc driver is to use putmsg() to
* send a message of a particular type. Replies from the driver also have this
* form, and will require the user to process the type field before examining
* the rest of the reply.
*
* The only change that must be observed when using the request and response
* structures defined above is as follows:
* when sending messages to the bmc driver, the data portion is now variable
* (the caller must allocate enough space to store the all structure members,
* plus enough space to cover the amount of data in the request), e.g.:
*
* bmc_msg_t *msg = malloc(offsetof(bmc_msg_t, msg) + sizeof(bmc_req_t) + 10);
*
* The amount allocated for the message is (# of bytes before the msg field) +
* the size of a bmc_req_t (which includes SEND_MAX_PAYLOAD_SIZE
* bytes in the data field), plus an additional 10 bytes for the data
* field (so the data field would occupy (SEND_MAX_PAYLOAD_SIZE + 10)
* bytes). The datalength member must reflect the amount of data in the
* request's data field (as was required when using the ioctl interface).
*/
typedef struct bmc_msg {
uint8_t m_type; /* Message type (see below) */
uint32_t m_id; /* Message ID */
uint8_t reserved[32];
uint8_t msg[1]; /* Variable length message data */
} bmc_msg_t;
/*
* An error response passed back from the bmc driver will have its m_id
* field set to BMC_UNKNOWN_MSG_ID if a message is sent to it that is not
* at least as large as a bmc_msg_t.
*/
#define BMC_UNKNOWN_MSG_ID ~((uint32_t)0)
/*
* Possible values for the m_type field in bmc_msg_t:
*/
#define BMC_MSG_REQUEST 1 /* BMC request (as above, sent to the */
/* driver by the user), bmc_msg.msg */
/* begins with the bmc_req_t */
/* structure. */
#define BMC_MSG_RESPONSE 2 /* BMC response (sent by the driver) */
/* bmc_msg.msg begins with the */
/* bmc_rsp_t structure. */
#define BMC_MSG_ERROR 3 /* Error while processing a user msg */
/* msg[0] is the error code */
/* (interpret as an errno value) */
#ifdef __cplusplus
}
#endif
#endif /* _BMC_INTF_H */