Blob Blame History Raw
/*
 * Copyright (c) 2005 Sun Microsystems, Inc.  All Rights Reserved.
 * Use is subject to license terms.
 */

/*
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 
 * Redistribution of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer.
 * 
 * Redistribution in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution.
 * 
 * Neither the name of Sun Microsystems, Inc. or the names of
 * contributors may be used to endorse or promote products derived
 * from this software without specific prior written permission.
 * 
 * This software is provided "AS IS," without a warranty of any kind.
 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
 * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
 * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED.
 * SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE
 * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
 * OR DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES.  IN NO EVENT WILL
 * SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA,
 * OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR
 * PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF
 * LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE,
 * EVEN IF SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
 */

#include <ipmitool/ipmi.h>
#include <ipmitool/ipmi_intf.h>
#include <ipmitool/ipmi_main.h>

#include <ipmitool/ipmi_sdr.h>
#include <ipmitool/ipmi_gendev.h>
#include <ipmitool/ipmi_sel.h>
#include <ipmitool/ipmi_fru.h>
#include <ipmitool/ipmi_sol.h>
#include <ipmitool/ipmi_isol.h>
#include <ipmitool/ipmi_tsol.h>
#include <ipmitool/ipmi_lanp.h>
#include <ipmitool/ipmi_chassis.h>
#include <ipmitool/ipmi_mc.h>
#include <ipmitool/ipmi_sensor.h>
#include <ipmitool/ipmi_channel.h>
#include <ipmitool/ipmi_session.h>
#include <ipmitool/ipmi_event.h>
#include <ipmitool/ipmi_user.h>
#include <ipmitool/ipmi_raw.h>
#include <ipmitool/ipmi_pef.h>
#include <ipmitool/ipmi_oem.h>
#include <ipmitool/ipmi_sunoem.h>
#include <ipmitool/ipmi_fwum.h>
#include <ipmitool/ipmi_picmg.h>
#include <ipmitool/ipmi_kontronoem.h>
#include <ipmitool/ipmi_firewall.h>
#include <ipmitool/ipmi_hpmfwupg.h>
#include <ipmitool/ipmi_delloem.h>
#include <ipmitool/ipmi_ekanalyzer.h>
#include <ipmitool/ipmi_ime.h>
#include <ipmitool/ipmi_dcmi.h>
#include <ipmitool/ipmi_vita.h>
#include <ipmitool/ipmi_quantaoem.h>

#ifdef HAVE_CONFIG_H
# include <config.h>
#endif

#ifdef HAVE_READLINE
extern int ipmi_shell_main(struct ipmi_intf * intf, int argc, char ** argv);
#endif
extern int ipmi_echo_main(struct ipmi_intf * intf, int argc, char ** argv);
extern int ipmi_set_main(struct ipmi_intf * intf, int argc, char ** argv);
extern int ipmi_exec_main(struct ipmi_intf * intf, int argc, char ** argv);
extern int ipmi_lan6_main(struct ipmi_intf *intf, int argc, char **argv);


int csv_output = 0;
int verbose = 0;

struct ipmi_cmd ipmitool_cmd_list[] = {
	{ ipmi_raw_main,     "raw",     "Send a RAW IPMI request and print response" },
	{ ipmi_rawi2c_main,  "i2c",     "Send an I2C Master Write-Read command and print response" },
	{ ipmi_rawspd_main,  "spd",     "Print SPD info from remote I2C device" },
	{ ipmi_lanp_main,    "lan",     "Configure LAN Channels" },
	{ ipmi_chassis_main, "chassis", "Get chassis status and set power state" },
	{ ipmi_power_main,   "power",   "Shortcut to chassis power commands" },
	{ ipmi_event_main,   "event",   "Send pre-defined events to MC" },
	{ ipmi_mc_main,      "mc",      "Management Controller status and global enables" },
	{ ipmi_mc_main,      "bmc",     NULL },	/* for backwards compatibility */
	{ ipmi_sdr_main,     "sdr",     "Print Sensor Data Repository entries and readings" },
	{ ipmi_sensor_main,  "sensor",  "Print detailed sensor information" },
	{ ipmi_fru_main,     "fru",     "Print built-in FRU and scan SDR for FRU locators" },
	{ ipmi_gendev_main,  "gendev",  "Read/Write Device associated with Generic Device locators sdr" },
	{ ipmi_sel_main,     "sel",     "Print System Event Log (SEL)" },
	{ ipmi_pef_main,     "pef",     "Configure Platform Event Filtering (PEF)" },
	{ ipmi_sol_main,     "sol",     "Configure and connect IPMIv2.0 Serial-over-LAN" },
	{ ipmi_tsol_main,    "tsol",    "Configure and connect with Tyan IPMIv1.5 Serial-over-LAN" },
	{ ipmi_isol_main,    "isol",    "Configure IPMIv1.5 Serial-over-LAN" },
	{ ipmi_user_main,    "user",    "Configure Management Controller users" },
	{ ipmi_channel_main, "channel", "Configure Management Controller channels" },
	{ ipmi_session_main, "session", "Print session information" },
	{ ipmi_dcmi_main,    "dcmi",    "Data Center Management Interface"},
	{ ipmi_nm_main,      "nm",      "Node Manager Interface"},
	{ ipmi_sunoem_main,  "sunoem",  "OEM Commands for Sun servers" },
	{ ipmi_kontronoem_main, "kontronoem", "OEM Commands for Kontron devices"},
	{ ipmi_picmg_main,   "picmg",   "Run a PICMG/ATCA extended cmd"},
	{ ipmi_fwum_main,    "fwum",	"Update IPMC using Kontron OEM Firmware Update Manager" },
	{ ipmi_firewall_main,"firewall","Configure Firmware Firewall" },
	{ ipmi_delloem_main, "delloem", "OEM Commands for Dell systems" },
#ifdef HAVE_READLINE
	{ ipmi_shell_main,   "shell",   "Launch interactive IPMI shell" },
#endif
	{ ipmi_exec_main,    "exec",    "Run list of commands from file" },
	{ ipmi_set_main,     "set",     "Set runtime variable for shell and exec" },
	{ ipmi_echo_main,    "echo",    NULL }, /* for echoing lines to stdout in scripts */
	{ ipmi_hpmfwupg_main,"hpm", "Update HPM components using PICMG HPM.1 file"},
	{ ipmi_ekanalyzer_main,"ekanalyzer", "run FRU-Ekeying analyzer using FRU files"},
	{ ipmi_ime_main,          "ime", "Update Intel Manageability Engine Firmware"},
	{ ipmi_vita_main,   "vita",   "Run a VITA 46.11 extended cmd"},
	{ ipmi_lan6_main,   "lan6",   "Configure IPv6 LAN Channels"},
	{ NULL },
};

int
main(int argc, char ** argv)
{
	int rc;

	rc = ipmi_main(argc, argv, ipmitool_cmd_list, NULL);

	if (rc < 0)
		exit(EXIT_FAILURE);
	else
		exit(EXIT_SUCCESS);
}