From a7d494c764ce1212b16ed2269d99830331e2273e Mon Sep 17 00:00:00 2001 From: Packit Date: Sep 21 2020 09:47:49 +0000 Subject: gtksourceview3-3.24.9 base --- diff --git a/ABOUT-NLS b/ABOUT-NLS new file mode 100644 index 0000000..b1de1b6 --- /dev/null +++ b/ABOUT-NLS @@ -0,0 +1,1282 @@ +1 Notes on the Free Translation Project +*************************************** + +Free software is going international! The Free Translation Project is +a way to get maintainers of free software, translators, and users all +together, so that free software will gradually become able to speak many +languages. A few packages already provide translations for their +messages. + + If you found this `ABOUT-NLS' file inside a distribution, you may +assume that the distributed package does use GNU `gettext' internally, +itself available at your nearest GNU archive site. But you do _not_ +need to install GNU `gettext' prior to configuring, installing or using +this package with messages translated. + + Installers will find here some useful hints. These notes also +explain how users should proceed for getting the programs to use the +available translations. They tell how people wanting to contribute and +work on translations can contact the appropriate team. + +1.1 INSTALL Matters +=================== + +Some packages are "localizable" when properly installed; the programs +they contain can be made to speak your own native language. Most such +packages use GNU `gettext'. Other packages have their own ways to +internationalization, predating GNU `gettext'. + + By default, this package will be installed to allow translation of +messages. It will automatically detect whether the system already +provides the GNU `gettext' functions. Installers may use special +options at configuration time for changing the default behaviour. The +command: + + ./configure --disable-nls + +will _totally_ disable translation of messages. + + When you already have GNU `gettext' installed on your system and run +configure without an option for your new package, `configure' will +probably detect the previously built and installed `libintl' library +and will decide to use it. If not, you may have to to use the +`--with-libintl-prefix' option to tell `configure' where to look for it. + + Internationalized packages usually have many `po/LL.po' files, where +LL gives an ISO 639 two-letter code identifying the language. Unless +translations have been forbidden at `configure' time by using the +`--disable-nls' switch, all available translations are installed +together with the package. However, the environment variable `LINGUAS' +may be set, prior to configuration, to limit the installed set. +`LINGUAS' should then contain a space separated list of two-letter +codes, stating which languages are allowed. + +1.2 Using This Package +====================== + +As a user, if your language has been installed for this package, you +only have to set the `LANG' environment variable to the appropriate +`LL_CC' combination. If you happen to have the `LC_ALL' or some other +`LC_xxx' environment variables set, you should unset them before +setting `LANG', otherwise the setting of `LANG' will not have the +desired effect. Here `LL' is an ISO 639 two-letter language code, and +`CC' is an ISO 3166 two-letter country code. For example, let's +suppose that you speak German and live in Germany. At the shell +prompt, merely execute `setenv LANG de_DE' (in `csh'), +`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash'). +This can be done from your `.login' or `.profile' file, once and for +all. + + You might think that the country code specification is redundant. +But in fact, some languages have dialects in different countries. For +example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The +country code serves to distinguish the dialects. + + The locale naming convention of `LL_CC', with `LL' denoting the +language and `CC' denoting the country, is the one use on systems based +on GNU libc. On other systems, some variations of this scheme are +used, such as `LL' or `LL_CC.ENCODING'. You can get the list of +locales supported by your system for your language by running the +command `locale -a | grep '^LL''. + + Not all programs have translations for all languages. By default, an +English message is shown in place of a nonexistent translation. If you +understand other languages, you can set up a priority list of languages. +This is done through a different environment variable, called +`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG' +for the purpose of message handling, but you still need to have `LANG' +set to the primary language; this is required by other parts of the +system libraries. For example, some Swedish users who would rather +read translations in German than English for when Swedish is not +available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'. + + Special advice for Norwegian users: The language code for Norwegian +bokma*l changed from `no' to `nb' recently (in 2003). During the +transition period, while some message catalogs for this language are +installed under `nb' and some older ones under `no', it's recommended +for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and +older translations are used. + + In the `LANGUAGE' environment variable, but not in the `LANG' +environment variable, `LL_CC' combinations can be abbreviated as `LL' +to denote the language's main dialect. For example, `de' is equivalent +to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT' +(Portuguese as spoken in Portugal) in this context. + +1.3 Translating Teams +===================== + +For the Free Translation Project to be a success, we need interested +people who like their own language and write it well, and who are also +able to synergize with other translators speaking the same language. +Each translation team has its own mailing list. The up-to-date list of +teams can be found at the Free Translation Project's homepage, +`http://translationproject.org/', in the "Teams" area. + + If you'd like to volunteer to _work_ at translating messages, you +should become a member of the translating team for your own language. +The subscribing address is _not_ the same as the list itself, it has +`-request' appended. For example, speakers of Swedish can send a +message to `sv-request@li.org', having this message body: + + subscribe + + Keep in mind that team members are expected to participate +_actively_ in translations, or at solving translational difficulties, +rather than merely lurking around. If your team does not exist yet and +you want to start one, or if you are unsure about what to do or how to +get started, please write to `coordinator@translationproject.org' to +reach the coordinator for all translator teams. + + The English team is special. It works at improving and uniformizing +the terminology in use. Proven linguistic skills are praised more than +programming skills, here. + +1.4 Available Packages +====================== + +Languages are not equally supported in all packages. The following +matrix shows the current state of internationalization, as of June +2010. The matrix shows, in regard of each package, for which languages +PO files have been submitted to translation coordination, with a +translation percentage of at least 50%. + + Ready PO files af am an ar as ast az be be@latin bg bn_IN bs ca + +--------------------------------------------------+ + a2ps | [] [] | + aegis | | + ant-phone | | + anubis | | + aspell | [] [] | + bash | | + bfd | | + bibshelf | [] | + binutils | | + bison | | + bison-runtime | [] | + bluez-pin | [] [] | + bombono-dvd | | + buzztard | | + cflow | | + clisp | | + coreutils | [] [] | + cpio | | + cppi | | + cpplib | [] | + cryptsetup | | + dfarc | | + dialog | [] [] | + dico | | + diffutils | [] | + dink | | + doodle | | + e2fsprogs | [] | + enscript | [] | + exif | | + fetchmail | [] | + findutils | [] | + flex | [] | + freedink | | + gas | | + gawk | [] [] | + gcal | [] | + gcc | | + gettext-examples | [] [] [] [] | + gettext-runtime | [] [] | + gettext-tools | [] [] | + gip | [] | + gjay | | + gliv | [] | + glunarclock | [] [] | + gnubiff | | + gnucash | [] | + gnuedu | | + gnulib | | + gnunet | | + gnunet-gtk | | + gnutls | | + gold | | + gpe-aerial | | + gpe-beam | | + gpe-bluetooth | | + gpe-calendar | | + gpe-clock | [] | + gpe-conf | | + gpe-contacts | | + gpe-edit | | + gpe-filemanager | | + gpe-go | | + gpe-login | | + gpe-ownerinfo | [] | + gpe-package | | + gpe-sketchbook | | + gpe-su | [] | + gpe-taskmanager | [] | + gpe-timesheet | [] | + gpe-today | [] | + gpe-todo | | + gphoto2 | | + gprof | [] | + gpsdrive | | + gramadoir | | + grep | | + grub | [] [] | + gsasl | | + gss | | + gst-plugins-bad | [] | + gst-plugins-base | [] | + gst-plugins-good | [] | + gst-plugins-ugly | [] | + gstreamer | [] [] [] | + gtick | | + gtkam | [] | + gtkorphan | [] | + gtkspell | [] [] [] | + gutenprint | | + hello | [] | + help2man | | + hylafax | | + idutils | | + indent | [] [] | + iso_15924 | | + iso_3166 | [] [] [] [] [] [] [] | + iso_3166_2 | | + iso_4217 | | + iso_639 | [] [] [] [] | + iso_639_3 | | + jwhois | | + kbd | | + keytouch | [] | + keytouch-editor | | + keytouch-keyboa... | [] | + klavaro | [] | + latrine | | + ld | [] | + leafpad | [] [] | + libc | [] [] | + libexif | () | + libextractor | | + libgnutls | | + libgpewidget | | + libgpg-error | | + libgphoto2 | | + libgphoto2_port | | + libgsasl | | + libiconv | [] | + libidn | | + lifelines | | + liferea | [] [] | + lilypond | | + linkdr | [] | + lordsawar | | + lprng | | + lynx | [] | + m4 | | + mailfromd | | + mailutils | | + make | | + man-db | | + man-db-manpages | | + minicom | | + mkisofs | | + myserver | | + nano | [] [] | + opcodes | | + parted | | + pies | | + popt | | + psmisc | | + pspp | [] | + pwdutils | | + radius | [] | + recode | [] [] | + rosegarden | | + rpm | | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] [] | + sed | [] [] | + sharutils | [] [] | + shishi | | + skencil | | + solfege | | + solfege-manual | | + soundtracker | | + sp | | + sysstat | | + tar | [] | + texinfo | | + tin | | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] | + vice | | + vmm | | + vorbis-tools | | + wastesedge | | + wdiff | | + wget | [] [] | + wyslij-po | | + xchat | [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] | + +--------------------------------------------------+ + af am an ar as ast az be be@latin bg bn_IN bs ca + 6 0 1 2 3 19 1 10 3 28 3 1 38 + + crh cs da de el en en_GB en_ZA eo es et eu fa + +-------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] | + aegis | [] [] [] | + ant-phone | [] () | + anubis | [] [] | + aspell | [] [] [] [] [] | + bash | [] [] [] | + bfd | [] | + bibshelf | [] [] [] | + binutils | [] | + bison | [] [] | + bison-runtime | [] [] [] [] | + bluez-pin | [] [] [] [] [] [] | + bombono-dvd | [] | + buzztard | [] [] [] | + cflow | [] [] | + clisp | [] [] [] [] | + coreutils | [] [] [] [] | + cpio | | + cppi | | + cpplib | [] [] [] | + cryptsetup | [] | + dfarc | [] [] [] | + dialog | [] [] [] [] [] | + dico | | + diffutils | [] [] [] [] [] [] | + dink | [] [] [] | + doodle | [] | + e2fsprogs | [] [] [] | + enscript | [] [] [] | + exif | () [] [] | + fetchmail | [] [] () [] [] [] | + findutils | [] [] [] | + flex | [] [] | + freedink | [] [] [] | + gas | [] | + gawk | [] [] [] | + gcal | [] | + gcc | [] [] | + gettext-examples | [] [] [] [] | + gettext-runtime | [] [] [] [] | + gettext-tools | [] [] [] | + gip | [] [] [] [] | + gjay | [] | + gliv | [] [] [] | + glunarclock | [] [] | + gnubiff | () | + gnucash | [] () () () () | + gnuedu | [] [] | + gnulib | [] [] | + gnunet | | + gnunet-gtk | [] | + gnutls | [] [] | + gold | [] | + gpe-aerial | [] [] [] [] | + gpe-beam | [] [] [] [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] | + gpe-clock | [] [] [] [] | + gpe-conf | [] [] [] | + gpe-contacts | [] [] [] | + gpe-edit | [] [] | + gpe-filemanager | [] [] [] | + gpe-go | [] [] [] [] | + gpe-login | [] [] | + gpe-ownerinfo | [] [] [] [] | + gpe-package | [] [] [] | + gpe-sketchbook | [] [] [] [] | + gpe-su | [] [] [] [] | + gpe-taskmanager | [] [] [] [] | + gpe-timesheet | [] [] [] [] | + gpe-today | [] [] [] [] | + gpe-todo | [] [] [] | + gphoto2 | [] [] () [] [] [] | + gprof | [] [] [] | + gpsdrive | [] [] [] | + gramadoir | [] [] [] | + grep | [] | + grub | [] [] | + gsasl | [] | + gss | | + gst-plugins-bad | [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] () [] | + gtkam | [] [] () [] [] | + gtkorphan | [] [] [] [] | + gtkspell | [] [] [] [] [] [] [] | + gutenprint | [] [] [] | + hello | [] [] [] [] | + help2man | [] | + hylafax | [] [] | + idutils | [] [] | + indent | [] [] [] [] [] [] [] | + iso_15924 | [] () [] [] | + iso_3166 | [] [] [] [] () [] [] [] () | + iso_3166_2 | () | + iso_4217 | [] [] [] () [] [] | + iso_639 | [] [] [] [] () [] [] | + iso_639_3 | [] | + jwhois | [] | + kbd | [] [] [] [] [] | + keytouch | [] [] | + keytouch-editor | [] [] | + keytouch-keyboa... | [] | + klavaro | [] [] [] [] | + latrine | [] () | + ld | [] [] | + leafpad | [] [] [] [] [] [] | + libc | [] [] [] [] | + libexif | [] [] () | + libextractor | | + libgnutls | [] | + libgpewidget | [] [] | + libgpg-error | [] [] | + libgphoto2 | [] () | + libgphoto2_port | [] () [] | + libgsasl | | + libiconv | [] [] [] [] [] | + libidn | [] [] [] | + lifelines | [] () | + liferea | [] [] [] [] [] | + lilypond | [] [] [] | + linkdr | [] [] [] | + lordsawar | [] | + lprng | | + lynx | [] [] [] [] | + m4 | [] [] [] [] | + mailfromd | | + mailutils | [] | + make | [] [] [] | + man-db | | + man-db-manpages | | + minicom | [] [] [] [] | + mkisofs | | + myserver | | + nano | [] [] [] | + opcodes | [] [] | + parted | [] [] | + pies | | + popt | [] [] [] [] [] | + psmisc | [] [] [] | + pspp | [] | + pwdutils | [] | + radius | [] | + recode | [] [] [] [] [] [] | + rosegarden | () () () | + rpm | [] [] [] | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] [] [] [] | + sed | [] [] [] [] [] [] | + sharutils | [] [] [] [] | + shishi | | + skencil | [] () [] | + solfege | [] [] [] | + solfege-manual | [] [] | + soundtracker | [] [] [] | + sp | [] | + sysstat | [] [] [] | + tar | [] [] [] [] | + texinfo | [] [] [] | + tin | [] [] | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] [] [] [] | + vice | () () | + vmm | [] | + vorbis-tools | [] [] | + wastesedge | [] | + wdiff | [] [] | + wget | [] [] [] | + wyslij-po | | + xchat | [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] [] | + +-------------------------------------------------+ + crh cs da de el en en_GB en_ZA eo es et eu fa + 5 64 105 117 18 1 8 0 28 89 18 19 0 + + fi fr ga gl gu he hi hr hu hy id is it ja ka kn + +----------------------------------------------------+ + a2ps | [] [] [] [] | + aegis | [] [] | + ant-phone | [] [] | + anubis | [] [] [] [] | + aspell | [] [] [] [] | + bash | [] [] [] [] | + bfd | [] [] [] | + bibshelf | [] [] [] [] [] | + binutils | [] [] [] | + bison | [] [] [] [] | + bison-runtime | [] [] [] [] [] [] | + bluez-pin | [] [] [] [] [] [] [] [] | + bombono-dvd | [] | + buzztard | [] | + cflow | [] [] [] | + clisp | [] | + coreutils | [] [] [] [] [] | + cpio | [] [] [] [] | + cppi | [] [] | + cpplib | [] [] [] | + cryptsetup | [] [] [] | + dfarc | [] [] [] | + dialog | [] [] [] [] [] [] [] | + dico | | + diffutils | [] [] [] [] [] [] [] [] [] | + dink | [] | + doodle | [] [] | + e2fsprogs | [] [] | + enscript | [] [] [] [] | + exif | [] [] [] [] [] [] | + fetchmail | [] [] [] [] | + findutils | [] [] [] [] [] [] | + flex | [] [] [] | + freedink | [] [] [] | + gas | [] [] | + gawk | [] [] [] [] () [] | + gcal | [] | + gcc | [] | + gettext-examples | [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] | + gettext-tools | [] [] [] [] | + gip | [] [] [] [] [] [] | + gjay | [] | + gliv | [] () | + glunarclock | [] [] [] [] | + gnubiff | () [] () | + gnucash | () () () () () [] | + gnuedu | [] [] | + gnulib | [] [] [] [] [] [] | + gnunet | | + gnunet-gtk | [] | + gnutls | [] [] | + gold | [] [] | + gpe-aerial | [] [] [] | + gpe-beam | [] [] [] [] | + gpe-bluetooth | [] [] [] [] | + gpe-calendar | [] [] | + gpe-clock | [] [] [] [] [] | + gpe-conf | [] [] [] [] | + gpe-contacts | [] [] [] [] | + gpe-edit | [] [] [] | + gpe-filemanager | [] [] [] [] | + gpe-go | [] [] [] [] [] | + gpe-login | [] [] [] | + gpe-ownerinfo | [] [] [] [] [] | + gpe-package | [] [] [] | + gpe-sketchbook | [] [] [] [] | + gpe-su | [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] | + gpe-timesheet | [] [] [] [] [] | + gpe-today | [] [] [] [] [] [] [] | + gpe-todo | [] [] [] | + gphoto2 | [] [] [] [] [] [] | + gprof | [] [] [] [] | + gpsdrive | [] [] [] | + gramadoir | [] [] [] | + grep | [] [] | + grub | [] [] [] [] | + gsasl | [] [] [] [] [] | + gss | [] [] [] [] [] | + gst-plugins-bad | [] [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] [] [] [] [] | + gtkam | [] [] [] [] [] | + gtkorphan | [] [] [] | + gtkspell | [] [] [] [] [] [] [] [] [] | + gutenprint | [] [] [] [] | + hello | [] [] [] | + help2man | [] [] | + hylafax | [] | + idutils | [] [] [] [] [] [] | + indent | [] [] [] [] [] [] [] [] | + iso_15924 | [] () [] [] | + iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] | + iso_3166_2 | () [] [] [] | + iso_4217 | [] () [] [] [] [] | + iso_639 | [] () [] [] [] [] [] [] [] | + iso_639_3 | () [] [] | + jwhois | [] [] [] [] [] | + kbd | [] [] | + keytouch | [] [] [] [] [] [] | + keytouch-editor | [] [] [] [] [] | + keytouch-keyboa... | [] [] [] [] [] | + klavaro | [] [] | + latrine | [] [] [] | + ld | [] [] [] [] | + leafpad | [] [] [] [] [] [] [] () | + libc | [] [] [] [] [] | + libexif | [] | + libextractor | | + libgnutls | [] [] | + libgpewidget | [] [] [] [] | + libgpg-error | [] [] | + libgphoto2 | [] [] [] | + libgphoto2_port | [] [] [] | + libgsasl | [] [] [] [] [] | + libiconv | [] [] [] [] [] [] | + libidn | [] [] [] [] | + lifelines | () | + liferea | [] [] [] [] | + lilypond | [] [] | + linkdr | [] [] [] [] [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] [] [] | + m4 | [] [] [] [] [] [] | + mailfromd | | + mailutils | [] [] | + make | [] [] [] [] [] [] [] [] [] | + man-db | [] [] | + man-db-manpages | [] | + minicom | [] [] [] [] [] | + mkisofs | [] [] [] [] | + myserver | | + nano | [] [] [] [] [] [] | + opcodes | [] [] [] [] | + parted | [] [] [] [] | + pies | | + popt | [] [] [] [] [] [] [] [] [] | + psmisc | [] [] [] | + pspp | | + pwdutils | [] [] | + radius | [] [] | + recode | [] [] [] [] [] [] [] [] | + rosegarden | () () () () () | + rpm | [] [] | + rush | | + sarg | [] | + screem | [] [] | + scrollkeeper | [] [] [] [] | + sed | [] [] [] [] [] [] [] [] | + sharutils | [] [] [] [] [] [] [] | + shishi | [] | + skencil | [] | + solfege | [] [] [] [] | + solfege-manual | [] [] | + soundtracker | [] [] | + sp | [] () | + sysstat | [] [] [] [] [] | + tar | [] [] [] [] [] [] [] | + texinfo | [] [] [] [] | + tin | [] | + unicode-han-tra... | | + unicode-transla... | [] [] | + util-linux-ng | [] [] [] [] [] [] | + vice | () () () | + vmm | [] | + vorbis-tools | [] | + wastesedge | () () | + wdiff | [] | + wget | [] [] [] [] [] [] [] [] | + wyslij-po | [] [] [] | + xchat | [] [] [] [] [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] | + +----------------------------------------------------+ + fi fr ga gl gu he hi hr hu hy id is it ja ka kn + 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4 + + ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne + +-----------------------------------------------+ + a2ps | [] | + aegis | | + ant-phone | | + anubis | [] [] | + aspell | [] | + bash | | + bfd | | + bibshelf | [] [] | + binutils | | + bison | [] | + bison-runtime | [] [] [] [] [] | + bluez-pin | [] [] [] [] [] | + bombono-dvd | | + buzztard | | + cflow | | + clisp | | + coreutils | [] | + cpio | | + cppi | | + cpplib | | + cryptsetup | | + dfarc | [] | + dialog | [] [] [] [] [] | + dico | | + diffutils | [] [] | + dink | | + doodle | | + e2fsprogs | | + enscript | | + exif | [] | + fetchmail | | + findutils | | + flex | | + freedink | [] | + gas | | + gawk | | + gcal | | + gcc | | + gettext-examples | [] [] [] [] | + gettext-runtime | [] | + gettext-tools | [] | + gip | [] [] | + gjay | | + gliv | | + glunarclock | [] | + gnubiff | | + gnucash | () () () () | + gnuedu | | + gnulib | | + gnunet | | + gnunet-gtk | | + gnutls | [] | + gold | | + gpe-aerial | [] | + gpe-beam | [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] | + gpe-clock | [] [] [] [] [] | + gpe-conf | [] [] | + gpe-contacts | [] [] | + gpe-edit | [] | + gpe-filemanager | [] [] | + gpe-go | [] [] [] | + gpe-login | [] | + gpe-ownerinfo | [] [] | + gpe-package | [] [] | + gpe-sketchbook | [] [] | + gpe-su | [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] [] | + gpe-timesheet | [] [] | + gpe-today | [] [] [] [] | + gpe-todo | [] [] | + gphoto2 | | + gprof | [] | + gpsdrive | | + gramadoir | | + grep | | + grub | | + gsasl | | + gss | | + gst-plugins-bad | [] [] [] [] | + gst-plugins-base | [] [] | + gst-plugins-good | [] [] | + gst-plugins-ugly | [] [] [] [] [] | + gstreamer | | + gtick | | + gtkam | [] | + gtkorphan | [] [] | + gtkspell | [] [] [] [] [] [] [] | + gutenprint | | + hello | [] [] [] | + help2man | | + hylafax | | + idutils | | + indent | | + iso_15924 | [] [] | + iso_3166 | [] [] () [] [] [] [] [] | + iso_3166_2 | | + iso_4217 | [] [] | + iso_639 | [] [] | + iso_639_3 | [] | + jwhois | [] | + kbd | | + keytouch | [] | + keytouch-editor | [] | + keytouch-keyboa... | [] | + klavaro | [] | + latrine | [] | + ld | | + leafpad | [] [] [] | + libc | [] | + libexif | | + libextractor | | + libgnutls | [] | + libgpewidget | [] [] | + libgpg-error | | + libgphoto2 | | + libgphoto2_port | | + libgsasl | | + libiconv | | + libidn | | + lifelines | | + liferea | | + lilypond | | + linkdr | | + lordsawar | | + lprng | | + lynx | | + m4 | | + mailfromd | | + mailutils | | + make | [] | + man-db | | + man-db-manpages | | + minicom | [] | + mkisofs | | + myserver | | + nano | [] [] | + opcodes | | + parted | | + pies | | + popt | [] [] [] | + psmisc | | + pspp | | + pwdutils | | + radius | | + recode | | + rosegarden | | + rpm | | + rush | | + sarg | | + screem | | + scrollkeeper | [] [] | + sed | | + sharutils | | + shishi | | + skencil | | + solfege | [] | + solfege-manual | | + soundtracker | | + sp | | + sysstat | [] | + tar | [] | + texinfo | [] | + tin | | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | | + vice | | + vmm | | + vorbis-tools | | + wastesedge | | + wdiff | | + wget | [] | + wyslij-po | | + xchat | [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +-----------------------------------------------+ + ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne + 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1 + + nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr + +---------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] [] | + aegis | [] [] [] | + ant-phone | [] [] | + anubis | [] [] [] | + aspell | [] [] [] [] [] | + bash | [] [] | + bfd | [] | + bibshelf | [] [] | + binutils | [] [] | + bison | [] [] [] | + bison-runtime | [] [] [] [] [] [] [] | + bluez-pin | [] [] [] [] [] [] [] [] | + bombono-dvd | [] () | + buzztard | [] [] | + cflow | [] | + clisp | [] [] | + coreutils | [] [] [] [] [] [] | + cpio | [] [] [] | + cppi | [] | + cpplib | [] | + cryptsetup | [] | + dfarc | [] | + dialog | [] [] [] [] | + dico | [] | + diffutils | [] [] [] [] [] [] | + dink | () | + doodle | [] [] | + e2fsprogs | [] [] | + enscript | [] [] [] [] [] | + exif | [] [] [] () [] | + fetchmail | [] [] [] [] | + findutils | [] [] [] [] [] | + flex | [] [] [] [] [] | + freedink | [] [] | + gas | | + gawk | [] [] [] [] | + gcal | | + gcc | [] | + gettext-examples | [] [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] [] [] [] | + gettext-tools | [] [] [] [] [] [] | + gip | [] [] [] [] [] | + gjay | | + gliv | [] [] [] [] [] [] | + glunarclock | [] [] [] [] [] | + gnubiff | [] () | + gnucash | [] () () () | + gnuedu | [] | + gnulib | [] [] [] [] | + gnunet | | + gnunet-gtk | | + gnutls | [] [] | + gold | | + gpe-aerial | [] [] [] [] [] [] [] | + gpe-beam | [] [] [] [] [] [] [] | + gpe-bluetooth | [] [] | + gpe-calendar | [] [] [] [] | + gpe-clock | [] [] [] [] [] [] [] [] | + gpe-conf | [] [] [] [] [] [] [] | + gpe-contacts | [] [] [] [] [] | + gpe-edit | [] [] [] | + gpe-filemanager | [] [] [] | + gpe-go | [] [] [] [] [] [] [] [] | + gpe-login | [] [] | + gpe-ownerinfo | [] [] [] [] [] [] [] [] | + gpe-package | [] [] | + gpe-sketchbook | [] [] [] [] [] [] [] | + gpe-su | [] [] [] [] [] [] [] [] | + gpe-taskmanager | [] [] [] [] [] [] [] [] | + gpe-timesheet | [] [] [] [] [] [] [] [] | + gpe-today | [] [] [] [] [] [] [] [] | + gpe-todo | [] [] [] [] [] | + gphoto2 | [] [] [] [] [] [] [] [] | + gprof | [] [] [] | + gpsdrive | [] [] | + gramadoir | [] [] | + grep | [] [] [] [] | + grub | [] [] [] | + gsasl | [] [] [] [] | + gss | [] [] [] | + gst-plugins-bad | [] [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] [] [] | + gtkam | [] [] [] [] [] [] | + gtkorphan | [] | + gtkspell | [] [] [] [] [] [] [] [] [] [] | + gutenprint | [] [] | + hello | [] [] [] [] | + help2man | [] [] | + hylafax | [] | + idutils | [] [] [] [] [] | + indent | [] [] [] [] [] [] [] | + iso_15924 | [] [] [] [] | + iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] | + iso_3166_2 | [] [] [] | + iso_4217 | [] [] [] [] [] [] [] [] | + iso_639 | [] [] [] [] [] [] [] [] [] | + iso_639_3 | [] [] | + jwhois | [] [] [] [] | + kbd | [] [] [] | + keytouch | [] [] [] | + keytouch-editor | [] [] [] | + keytouch-keyboa... | [] [] [] | + klavaro | [] [] | + latrine | [] [] | + ld | | + leafpad | [] [] [] [] [] [] [] [] [] | + libc | [] [] [] [] | + libexif | [] [] () [] | + libextractor | | + libgnutls | [] [] | + libgpewidget | [] [] [] | + libgpg-error | [] [] | + libgphoto2 | [] [] | + libgphoto2_port | [] [] [] [] [] | + libgsasl | [] [] [] [] [] | + libiconv | [] [] [] [] [] | + libidn | [] [] | + lifelines | [] [] | + liferea | [] [] [] [] [] () () [] | + lilypond | [] | + linkdr | [] [] [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] | + m4 | [] [] [] [] [] | + mailfromd | [] | + mailutils | [] | + make | [] [] [] [] | + man-db | [] [] [] | + man-db-manpages | [] [] [] | + minicom | [] [] [] [] | + mkisofs | [] [] [] | + myserver | | + nano | [] [] [] [] | + opcodes | [] [] | + parted | [] [] [] [] | + pies | [] | + popt | [] [] [] [] | + psmisc | [] [] [] | + pspp | [] [] | + pwdutils | [] | + radius | [] [] [] | + recode | [] [] [] [] [] [] [] [] | + rosegarden | () () | + rpm | [] [] [] | + rush | [] [] | + sarg | | + screem | | + scrollkeeper | [] [] [] [] [] [] [] [] | + sed | [] [] [] [] [] [] [] [] [] | + sharutils | [] [] [] [] | + shishi | [] | + skencil | [] [] | + solfege | [] [] [] [] | + solfege-manual | [] [] [] | + soundtracker | [] | + sp | | + sysstat | [] [] [] [] | + tar | [] [] [] [] | + texinfo | [] [] [] [] | + tin | [] | + unicode-han-tra... | | + unicode-transla... | | + util-linux-ng | [] [] [] [] [] | + vice | [] | + vmm | [] | + vorbis-tools | [] [] | + wastesedge | [] | + wdiff | [] [] | + wget | [] [] [] [] [] [] [] | + wyslij-po | [] [] [] | + xchat | [] [] [] [] [] [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +---------------------------------------------------+ + nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr + 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37 + + sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW + +---------------------------------------------------+ + a2ps | [] [] [] [] [] | 27 + aegis | [] | 9 + ant-phone | [] [] [] [] | 9 + anubis | [] [] [] [] | 15 + aspell | [] [] [] | 20 + bash | [] [] [] | 12 + bfd | [] | 6 + bibshelf | [] [] [] | 16 + binutils | [] [] | 8 + bison | [] [] | 12 + bison-runtime | [] [] [] [] [] [] | 29 + bluez-pin | [] [] [] [] [] [] [] [] | 37 + bombono-dvd | [] | 4 + buzztard | [] | 7 + cflow | [] [] [] | 9 + clisp | | 10 + coreutils | [] [] [] [] | 22 + cpio | [] [] [] [] [] [] | 13 + cppi | [] [] | 5 + cpplib | [] [] [] [] [] [] | 14 + cryptsetup | [] [] | 7 + dfarc | [] | 9 + dialog | [] [] [] [] [] [] [] | 30 + dico | [] | 2 + diffutils | [] [] [] [] [] [] | 30 + dink | | 4 + doodle | [] [] | 7 + e2fsprogs | [] [] [] | 11 + enscript | [] [] [] [] | 17 + exif | [] [] [] | 16 + fetchmail | [] [] [] | 17 + findutils | [] [] [] [] [] | 20 + flex | [] [] [] [] | 15 + freedink | [] | 10 + gas | [] | 4 + gawk | [] [] [] [] | 18 + gcal | [] [] | 5 + gcc | [] [] [] | 7 + gettext-examples | [] [] [] [] [] [] [] | 34 + gettext-runtime | [] [] [] [] [] [] [] | 29 + gettext-tools | [] [] [] [] [] [] | 22 + gip | [] [] [] [] | 22 + gjay | [] | 3 + gliv | [] [] [] | 14 + glunarclock | [] [] [] [] [] | 19 + gnubiff | [] [] | 4 + gnucash | () [] () [] () | 10 + gnuedu | [] [] | 7 + gnulib | [] [] [] [] | 16 + gnunet | [] | 1 + gnunet-gtk | [] [] [] | 5 + gnutls | [] [] [] | 10 + gold | [] | 4 + gpe-aerial | [] [] [] | 18 + gpe-beam | [] [] [] | 19 + gpe-bluetooth | [] [] [] | 13 + gpe-calendar | [] [] [] [] | 12 + gpe-clock | [] [] [] [] [] | 28 + gpe-conf | [] [] [] [] | 20 + gpe-contacts | [] [] [] | 17 + gpe-edit | [] [] [] | 12 + gpe-filemanager | [] [] [] [] | 16 + gpe-go | [] [] [] [] [] | 25 + gpe-login | [] [] [] | 11 + gpe-ownerinfo | [] [] [] [] [] | 25 + gpe-package | [] [] [] | 13 + gpe-sketchbook | [] [] [] | 20 + gpe-su | [] [] [] [] [] | 30 + gpe-taskmanager | [] [] [] [] [] | 29 + gpe-timesheet | [] [] [] [] [] | 25 + gpe-today | [] [] [] [] [] [] | 30 + gpe-todo | [] [] [] [] | 17 + gphoto2 | [] [] [] [] [] | 24 + gprof | [] [] [] | 15 + gpsdrive | [] [] [] | 11 + gramadoir | [] [] [] | 11 + grep | [] [] [] | 10 + grub | [] [] [] | 14 + gsasl | [] [] [] [] | 14 + gss | [] [] [] | 11 + gst-plugins-bad | [] [] [] [] | 26 + gst-plugins-base | [] [] [] [] [] | 24 + gst-plugins-good | [] [] [] [] | 24 + gst-plugins-ugly | [] [] [] [] [] | 29 + gstreamer | [] [] [] [] | 22 + gtick | [] [] [] | 13 + gtkam | [] [] [] | 20 + gtkorphan | [] [] [] | 14 + gtkspell | [] [] [] [] [] [] [] [] [] | 45 + gutenprint | [] | 10 + hello | [] [] [] [] [] [] | 21 + help2man | [] [] | 7 + hylafax | [] | 5 + idutils | [] [] [] [] | 17 + indent | [] [] [] [] [] [] | 30 + iso_15924 | () [] () [] [] | 16 + iso_3166 | [] [] () [] [] () [] [] [] () | 53 + iso_3166_2 | () [] () [] | 9 + iso_4217 | [] () [] [] () [] [] | 26 + iso_639 | [] [] [] () [] () [] [] [] [] | 38 + iso_639_3 | [] () | 8 + jwhois | [] [] [] [] [] | 16 + kbd | [] [] [] [] [] | 15 + keytouch | [] [] [] | 16 + keytouch-editor | [] [] [] | 14 + keytouch-keyboa... | [] [] [] | 14 + klavaro | [] | 11 + latrine | [] [] [] | 10 + ld | [] [] [] [] | 11 + leafpad | [] [] [] [] [] [] | 33 + libc | [] [] [] [] [] | 21 + libexif | [] () | 7 + libextractor | [] | 1 + libgnutls | [] [] [] | 9 + libgpewidget | [] [] [] | 14 + libgpg-error | [] [] [] | 9 + libgphoto2 | [] [] | 8 + libgphoto2_port | [] [] [] [] | 14 + libgsasl | [] [] [] | 13 + libiconv | [] [] [] [] | 21 + libidn | () [] [] | 11 + lifelines | [] | 4 + liferea | [] [] [] | 21 + lilypond | [] | 7 + linkdr | [] [] [] [] [] | 17 + lordsawar | | 1 + lprng | [] | 3 + lynx | [] [] [] [] | 17 + m4 | [] [] [] [] | 19 + mailfromd | [] [] | 3 + mailutils | [] | 5 + make | [] [] [] [] | 21 + man-db | [] [] [] | 8 + man-db-manpages | | 4 + minicom | [] [] | 16 + mkisofs | [] [] | 9 + myserver | | 0 + nano | [] [] [] [] | 21 + opcodes | [] [] [] | 11 + parted | [] [] [] [] [] | 15 + pies | [] [] | 3 + popt | [] [] [] [] [] [] | 27 + psmisc | [] [] | 11 + pspp | | 4 + pwdutils | [] [] | 6 + radius | [] [] | 9 + recode | [] [] [] [] | 28 + rosegarden | () | 0 + rpm | [] [] [] | 11 + rush | [] [] | 4 + sarg | | 1 + screem | [] | 3 + scrollkeeper | [] [] [] [] [] | 27 + sed | [] [] [] [] [] | 30 + sharutils | [] [] [] [] [] | 22 + shishi | [] | 3 + skencil | [] [] | 7 + solfege | [] [] [] [] | 16 + solfege-manual | [] | 8 + soundtracker | [] [] [] | 9 + sp | [] | 3 + sysstat | [] [] | 15 + tar | [] [] [] [] [] [] | 23 + texinfo | [] [] [] [] [] | 17 + tin | | 4 + unicode-han-tra... | | 0 + unicode-transla... | | 2 + util-linux-ng | [] [] [] [] | 20 + vice | () () | 1 + vmm | [] | 4 + vorbis-tools | [] | 6 + wastesedge | | 2 + wdiff | [] [] | 7 + wget | [] [] [] [] [] | 26 + wyslij-po | [] [] | 8 + xchat | [] [] [] [] [] [] | 36 + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | 63 + xkeyboard-config | [] [] [] | 22 + +---------------------------------------------------+ + 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW + 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41 2618 + + Some counters in the preceding matrix are higher than the number of +visible blocks let us expect. This is because a few extra PO files are +used for implementing regional variants of languages, or language +dialects. + + For a PO file in the matrix above to be effective, the package to +which it applies should also have been internationalized and +distributed as such by its maintainer. There might be an observable +lag between the mere existence a PO file and its wide availability in a +distribution. + + If June 2010 seems to be old, you may fetch a more recent copy of +this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date +matrix with full percentage details can be found at +`http://translationproject.org/extra/matrix.html'. + +1.5 Using `gettext' in new packages +=================================== + +If you are writing a freely available program and want to +internationalize it you are welcome to use GNU `gettext' in your +package. Of course you have to respect the GNU Library General Public +License which covers the use of the GNU `gettext' library. This means +in particular that even non-free programs can use `libintl' as a shared +library, whereas only free software can use `libintl' as a static +library or use modified versions of `libintl'. + + Once the sources are changed appropriately and the setup can handle +the use of `gettext' the only thing missing are the translations. The +Free Translation Project is also available for packages which are not +developed inside the GNU project. Therefore the information given above +applies also for every other Free Software Project. Contact +`coordinator@translationproject.org' to make the `.pot' files available +to the translation teams. + diff --git a/AUTHORS b/AUTHORS new file mode 100644 index 0000000..2b4bdae --- /dev/null +++ b/AUTHORS @@ -0,0 +1,15 @@ +Active authors: + +Ignacio Casal Quinteiro +Jesse van den Kieboom +Paolo Borelli +Sébastien Wilmet + +Old contributors: + +Chris Phelps +Gustavo Giráldez +Jeroen Zwartepoorte +Mikael Hermansson +Paolo Maggi +Yevgen Muntyan diff --git a/COPYING b/COPYING new file mode 100644 index 0000000..5ab7695 --- /dev/null +++ b/COPYING @@ -0,0 +1,504 @@ + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms of the +ordinary General Public License). + + To apply these terms, attach the following notices to the library. It is +safest to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the library, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James Random Hacker. + + , 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! + + diff --git a/ChangeLog b/ChangeLog new file mode 100644 index 0000000..2c7e4d0 --- /dev/null +++ b/ChangeLog @@ -0,0 +1 @@ +See the 'NEWS' file or the version control system's log. diff --git a/HACKING b/HACKING new file mode 100644 index 0000000..ea1693d --- /dev/null +++ b/HACKING @@ -0,0 +1,179 @@ +Guidelines for GtkSourceView +============================ + +GtkSourceView source code is maintained using the git version control system +and is available at the following location: + + git://git.gnome.org/gtksourceview + +Or if you have an account on GNOME servers: + + ssh://USERNAME@git.gnome.org/git/gtksourceview + +A web interface is available at: + + https://git.gnome.org/browse/gtksourceview/ + +Please don't commit directly to the git repository unless +you have been given the green light to commit freely to GtkSourceView. +When in doubt assume you haven't ;-). + +Please attach patches in bugzilla (http://bugzilla.gnome.org). +If the patch fixes a bug that is not reported yet in bugzilla or is +an enhancement, create a new bugreport. + +Please create patches with the git format-patch command. + +If you are a translator feel free to mark strings for translation, +fix typos in the code, etc. + +Please send patches for build & configure fixes too. I really appreciate +your help, I just want to review these fixes before applying. + +If you are a "build sheriff", feel free to commit fixes for build and +configure. + +When committing to the GtkSourceView git repository make sure to include a +meaningful commit message. Changes without a sufficient commit message +will be reverted. Commit messages should have the following format: + +=== begin example commit === +Short explanation of the commit + +Longer explanation explaining exactly what's changed, whether any +external or private interfaces changed, what bugs were fixed (with bug +tracker reference if applicable) and so forth. Be concise but not too brief. +=== end example commit === + + - Always add a brief description of the commit to the _first_ line of + the commit and terminate by two newlines (it will work without the + second newline, but that is not nice for the interfaces). + + - First line (the brief description) must only be one sentence and + should start with a capital letter unless it starts with a lowercase + symbol or identifier. Don't use a trailing period either. Don't exceed + 72 characters. + + - The main description (the body) is normal prose and should use normal + punctuation and capital letters where appropriate. Normally, for patches + sent to a mailing list it's copied from there. + + - When committing code on behalf of others use the --author option, e.g. + git commit -a --author "Joe Coder " and --signoff. + + +Code conventions +================ + +You may encounter old code that doesn't follow all the following code +conventions, but for new code it is better to follow them, for consistency. + + - Avoid trailing whitespace. + + - Indent the C code with tabulations with a width of eight characters. + + - The files should have a modeline for the indentation style. + + - All blocks should be surrounded by curly braces, even one-line blocks. It + spaces out the code, and it is more convenient when some code must be added + or removed without the need to add or remove the curly braces. + + - Follow the C89 standard. In particular, no "//"-style comments. + + - As a general rule of thumb, follow the same coding style as the surrounding + code. + + - Do not be cheap about blank lines, spacing the code vertically help + readability. However never use two consecutive blank lines, there is really + no need. + + +Programming best practices +========================== + +GtkSourceView is a pretty big piece of software, developed over the years by +different people and GNOME technologies. Some parts of the code may be a little +old. So when editing the code, we should try to make it better, not worse. + +Here are some general advices. + + - Simplicity: the simpler code the better. Any trick that seem smart when you + write it is going to bite your ass later when reading the code. Given that + you spend 90% of the time staring at the code and 10% writing it, making + reading the code harder is a net loss. + + - Brevity: make an effort to refactor common code into utility functions and + use library function whenever is possible: every time you cut and paste a + line of code you are throwing away all the precious seconds of your life + that you will later spend trying to figure out the differences among the two + copies that will have surely diverged. + + - Code for change: code is bound to contain bugs no matter how well it is + written. A good coding style allows to fix these bugs with minimal changes + instead of reformatting a whole section of unrelated code, this is + especially important to make patch review easier and to easily understand + the commit history. Some practical examples are: + + - Factor code into self contained functions so that changing a function + does not require to change all the callers. + + - Do not align variable declaration, "case" statements etc, since this + will inevitably mean that when a line will change you'll have to + reformat all the surrounding ones. + + - Declare variables in the strictest scope as possible. + + - Reorder functions so that you do not need prototypes for static + functions so that when you change them you need to change them only in + one place. + + - Self documentation and code comments: use code comments parsimoniously. Code + should be written so that it is clear and evident without the need of + comments. Besides, comments usually get outdated when the code is changed + and they become misleading. In particular avoid stating the obvious e.g. "a + = 1; /* assign 1 to a */". Use good function names and variables to make the + code self-documented. + + A good function name is one that explain clearly all what its code really + does. There shouldn't be hidden features. If you can not find easily a good + function name, you should probably split the function in smaller pieces. A + function should do only one thing, but do it well. + + Please avoid lots of one-letter variables. And a variable should be used for + only one purpose. + + Self-documentation is obviously not always possible, so when a comment is + needed, it is needed. In those cases make sure to explain why and not only + how a specific thing is done: you can deduce the "how" from the code, but + not the "why". Public library functions should always be documented and in + particular should include the calling conventions, e.g. if the result should + be freed by the caller. + + Do not use fancy frames around comments like a line full of + /*---------------*/ etc. + + - Contribute below on the stack. Fix a problem at the right place, instead of + writing hacks to work around a bug or a lack of feature in an underlying + library. + + +See also +======== + +https://wiki.gnome.org/Apps/Gedit/DevGettingStarted +https://developer.gnome.org/programming-guidelines/stable/ +https://wiki.gnome.org/Projects/GTK%2B/BestPractices +http://ometer.com/hacking.html +http://blogs.gnome.org/swilmet/2012/08/01/about-code-quality-and-maintainability/ + +For a shared library: + +http://davidz25.blogspot.be/2011/07/writing-c-library-intro-conclusion-and.html +http://akkadia.org/drepper/ + - How to Write Shared Libraries + - Good Practices in Library Design, Implementation, and Maintenance + + +Thanks, + + The GtkSourceView team. diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..8865734 --- /dev/null +++ b/INSTALL @@ -0,0 +1,368 @@ +Installation Instructions +************************* + + Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software +Foundation, Inc. + + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. + +Basic Installation +================== + + Briefly, the shell command './configure && make && make install' +should configure, build, and install this package. The following +more-detailed instructions are generic; see the 'README' file for +instructions specific to this package. Some packages provide this +'INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. + + The 'configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a 'Makefile' in each directory of the package. +It may also create one or more '.h' files containing system-dependent +definitions. Finally, it creates a shell script 'config.status' that +you can run in the future to recreate the current configuration, and a +file 'config.log' containing compiler output (useful mainly for +debugging 'configure'). + + It can also use an optional file (typically called 'config.cache' and +enabled with '--cache-file=config.cache' or simply '-C') that saves the +results of its tests to speed up reconfiguring. Caching is disabled by +default to prevent problems with accidental use of stale cache files. + + If you need to do unusual things to compile the package, please try +to figure out how 'configure' could check whether to do them, and mail +diffs or instructions to the address given in the 'README' so they can +be considered for the next release. If you are using the cache, and at +some point 'config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file 'configure.ac' (or 'configure.in') is used to create +'configure' by a program called 'autoconf'. You need 'configure.ac' if +you want to change it or regenerate 'configure' using a newer version of +'autoconf'. + + The simplest way to compile this package is: + + 1. 'cd' to the directory containing the package's source code and type + './configure' to configure the package for your system. + + Running 'configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type 'make' to compile the package. + + 3. Optionally, type 'make check' to run any self-tests that come with + the package, generally using the just-built uninstalled binaries. + + 4. Type 'make install' to install the programs and any data files and + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the 'make install' phase executed with root + privileges. + + 5. Optionally, type 'make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior 'make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the + source code directory by typing 'make clean'. To also remove the + files that 'configure' created (so you can compile the package for + a different kind of computer), type 'make distclean'. There is + also a 'make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + + 7. Often, you can also type 'make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide 'make + distcheck', which can by used by developers to test that all other + targets like 'make install' and 'make uninstall' work correctly. + This target is generally not run by end users. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the 'configure' script does not know about. Run './configure --help' +for details on some of the pertinent environment variables. + + You can give 'configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here is +an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU 'make'. 'cd' to the +directory where you want the object files and executables to go and run +the 'configure' script. 'configure' automatically checks for the source +code in the directory that 'configure' is in and in '..'. This is known +as a "VPATH" build. + + With a non-GNU 'make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use 'make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple '-arch' options to the +compiler but only a single '-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the 'lipo' tool if you have problems. + +Installation Names +================== + + By default, 'make install' installs the package's commands under +'/usr/local/bin', include files under '/usr/local/include', etc. You +can specify an installation prefix other than '/usr/local' by giving +'configure' the option '--prefix=PREFIX', where PREFIX must be an +absolute file name. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option '--exec-prefix=PREFIX' to 'configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like '--bindir=DIR' to specify different values for particular +kinds of files. Run 'configure --help' for a list of the directories +you can set and what kinds of files go in them. In general, the default +for these options is expressed in terms of '${prefix}', so that +specifying just '--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to 'configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +'make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, 'make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +'${prefix}'. Any directories that were specified during 'configure', +but not in terms of '${prefix}', must each be overridden at install time +for the entire installation to be relocated. The approach of makefile +variable overrides for each directory variable is required by the GNU +Coding Standards, and ideally causes no recompilation. However, some +platforms have known limitations with the semantics of shared libraries +that end up requiring recompilation when using this method, particularly +noticeable in packages that use GNU Libtool. + + The second method involves providing the 'DESTDIR' variable. For +example, 'make install DESTDIR=/alternate/directory' will prepend +'/alternate/directory' before all installation names. The approach of +'DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of '${prefix}' +at 'configure' time. + +Optional Features +================= + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving 'configure' the +option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'. + + Some packages pay attention to '--enable-FEATURE' options to +'configure', where FEATURE indicates an optional part of the package. +They may also pay attention to '--with-PACKAGE' options, where PACKAGE +is something like 'gnu-as' or 'x' (for the X Window System). The +'README' should mention any '--enable-' and '--with-' options that the +package recognizes. + + For packages that use the X Window System, 'configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the 'configure' options '--x-includes=DIR' and +'--x-libraries=DIR' to specify their locations. + + Some packages offer the ability to configure how verbose the +execution of 'make' will be. For these packages, running './configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with 'make V=1'; while running './configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with 'make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC +is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + HP-UX 'make' updates targets which have the same time stamps as their +prerequisites, which makes it generally unusable when shipped generated +files such as 'configure' are involved. Use GNU 'make' instead. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its '' header file. The option '-nodtk' can be used as a +workaround. If GNU CC is not installed, it is therefore recommended to +try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put '/usr/ucb' early in your 'PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in '/usr/bin'. So, if you need '/usr/ucb' +in your 'PATH', put it _after_ '/usr/bin'. + + On Haiku, software installed for all users goes in '/boot/common', +not '/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + +Specifying the System Type +========================== + + There may be some features 'configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, 'configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +'--build=TYPE' option. TYPE can either be a short name for the system +type, such as 'sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS + KERNEL-OS + + See the file 'config.sub' for the possible values of each field. If +'config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option '--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with '--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for 'configure' scripts to share, +you can create a site shell script called 'config.site' that gives +default values for variables like 'CC', 'cache_file', and 'prefix'. +'configure' looks for 'PREFIX/share/config.site' if it exists, then +'PREFIX/etc/config.site' if it exists. Or, you can set the +'CONFIG_SITE' environment variable to the location of the site script. +A warning: not all 'configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to 'configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the 'configure' command line, using 'VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified 'gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an +Autoconf limitation. Until the limitation is lifted, you can use this +workaround: + + CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash + +'configure' Invocation +====================== + + 'configure' recognizes the following options to control how it +operates. + +'--help' +'-h' + Print a summary of all of the options to 'configure', and exit. + +'--help=short' +'--help=recursive' + Print a summary of the options unique to this package's + 'configure', and exit. The 'short' variant lists options used only + in the top level, while the 'recursive' variant lists options also + present in any nested packages. + +'--version' +'-V' + Print the version of Autoconf used to generate the 'configure' + script, and exit. + +'--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally 'config.cache'. FILE defaults to '/dev/null' to + disable caching. + +'--config-cache' +'-C' + Alias for '--cache-file=config.cache'. + +'--quiet' +'--silent' +'-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to '/dev/null' (any error + messages will still be shown). + +'--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + 'configure' can determine that directory automatically. + +'--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: for + more details, including other options available for fine-tuning the + installation locations. + +'--no-create' +'-n' + Run the configure checks, but stop before creating any output + files. + +'configure' also accepts some other, not widely useful, options. Run +'configure --help' for more details. diff --git a/MAINTAINERS b/MAINTAINERS new file mode 100644 index 0000000..1076fdf --- /dev/null +++ b/MAINTAINERS @@ -0,0 +1,7 @@ +Paolo Borelli +E-mail: pborelli@gnome.org +Userid: pborelli + +Sébastien Wilmet +E-mail: swilmet@gnome.org +Userid: swilmet diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..d1ad8b2 --- /dev/null +++ b/Makefile.am @@ -0,0 +1,104 @@ +SUBDIRS = gtksourceview po data docs tests testsuite win32 + +@CODE_COVERAGE_RULES@ + +AM_DISTCHECK_CONFIGURE_FLAGS = \ + --enable-gtk-doc \ + --enable-introspection \ + --enable-vala \ + --enable-glade-catalog + +pkgconfig_DATA = gtksourceview-@GSV_API_VERSION@.pc + +EXTRA_DIST = \ + gtksourceview.doap \ + gtksourceview.pc.in \ + HACKING \ + MAINTAINERS \ + config.h.win32.in \ + config.h.win32 + +MAINTAINERCLEANFILES = \ + ABOUT-NLS \ + aclocal.m4 \ + compile \ + config.guess \ + config.h.in \ + config.rpath \ + config.sub \ + depcomp \ + gtk-doc.make \ + INSTALL \ + install-sh \ + ltmain.sh \ + m4/ax_append_compile_flags.m4 \ + m4/ax_append_flag.m4 \ + m4/ax_append_link_flags.m4 \ + m4/ax_check_compile_flag.m4 \ + m4/ax_check_link_flag.m4 \ + m4/ax_code_coverage.m4 \ + m4/ax_compiler_flags_cflags.m4 \ + m4/ax_compiler_flags_gir.m4 \ + m4/ax_compiler_flags_ldflags.m4 \ + m4/ax_compiler_flags.m4 \ + m4/ax_is_release.m4 \ + m4/ax_pkg_check_modules.m4 \ + m4/ax_require_defined.m4 \ + m4/ax_valgrind_check.m4 \ + m4/codeset.m4 \ + m4/extern-inline.m4 \ + m4/fcntl-o.m4 \ + m4/gettext.m4 \ + m4/glibc21.m4 \ + m4/glibc2.m4 \ + m4/gtk-3.0.m4 \ + m4/gtk-doc.m4 \ + m4/iconv.m4 \ + m4/intdiv0.m4 \ + m4/intldir.m4 \ + m4/intl.m4 \ + m4/intlmacosx.m4 \ + m4/intmax.m4 \ + m4/introspection.m4 \ + m4/inttypes_h.m4 \ + m4/inttypes-pri.m4 \ + m4/lcmessage.m4 \ + m4/lib-ld.m4 \ + m4/lib-link.m4 \ + m4/lib-prefix.m4 \ + m4/libtool.m4 \ + m4/lock.m4 \ + m4/longlong.m4 \ + m4/lt~obsolete.m4 \ + m4/ltoptions.m4 \ + m4/ltsugar.m4 \ + m4/ltversion.m4 \ + m4/nls.m4 \ + m4/pkg.m4 \ + m4/po.m4 \ + m4/printf-posix.m4 \ + m4/progtest.m4 \ + m4/size_max.m4 \ + m4/stdint_h.m4 \ + m4/threadlib.m4 \ + m4/uintmax_t.m4 \ + m4/visibility.m4 \ + m4/wchar_t.m4 \ + m4/wint_t.m4 \ + m4/xsize.m4 \ + missing \ + mkinstalldirs \ + po/Makevars.template \ + po/Rules-quot \ + po/boldquot.sed \ + po/en@boldquot.header \ + po/en@quot.header \ + po/insert-header.sin \ + po/quot.sed \ + po/remove-potcdate.sed \ + po/remove-potcdate.sin \ + po/stamp-po \ + test-driver \ + `find "$(srcdir)" -type f -name Makefile.in -print` + +-include $(top_srcdir)/git.mk diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..a87feed --- /dev/null +++ b/Makefile.in @@ -0,0 +1,1107 @@ +# Makefile.in generated by automake 1.15.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2017 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_append_compile_flags.m4 \ + $(top_srcdir)/m4/ax_append_flag.m4 \ + $(top_srcdir)/m4/ax_append_link_flags.m4 \ + $(top_srcdir)/m4/ax_check_compile_flag.m4 \ + $(top_srcdir)/m4/ax_check_link_flag.m4 \ + $(top_srcdir)/m4/ax_code_coverage.m4 \ + $(top_srcdir)/m4/ax_compiler_flags.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_cflags.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_gir.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_ldflags.m4 \ + $(top_srcdir)/m4/ax_is_release.m4 \ + $(top_srcdir)/m4/ax_pkg_check_modules.m4 \ + $(top_srcdir)/m4/ax_require_defined.m4 \ + $(top_srcdir)/m4/ax_valgrind_check.m4 \ + $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-3.0.m4 \ + $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/iconv.m4 \ + $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \ + $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ + $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/vapigen.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) $(am__DIST_COMMON) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = gtksourceview-${GSV_API_VERSION}.pc \ + config.h.win32 +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(pkgconfigdir)" +DATA = $(pkgconfig_DATA) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + cscope distdir dist dist-all distcheck +am__extra_recursive_targets = check-valgrind-recursive \ + check-valgrind-memcheck-recursive \ + check-valgrind-helgrind-recursive check-valgrind-drd-recursive \ + check-valgrind-sgcheck-recursive +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ + $(LISP)config.h.in +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(srcdir)/config.h.win32.in $(srcdir)/gtksourceview.pc.in \ + ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README \ + compile config.guess config.rpath config.sub depcomp \ + install-sh ltmain.sh missing +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +GZIP_ENV = --best +DIST_ARCHIVES = $(distdir).tar.xz +DIST_TARGETS = dist-xz +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print +ABS_TOP_SRCDIR = @ABS_TOP_SRCDIR@ +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +AX_PACKAGE_REQUIRES = @AX_PACKAGE_REQUIRES@ +AX_PACKAGE_REQUIRES_PRIVATE = @AX_PACKAGE_REQUIRES_PRIVATE@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ +CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ +CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ +CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ +CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ +CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DEP_CFLAGS = @DEP_CFLAGS@ +DEP_LIBS = @DEP_LIBS@ +DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@ +ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@ +ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@ +ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GCOV = @GCOV@ +GENHTML = @GENHTML@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +GLADE_CATALOG_DIR = @GLADE_CATALOG_DIR@ +GLADE_CFLAGS = @GLADE_CFLAGS@ +GLADE_LIBS = @GLADE_LIBS@ +GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ +GLIB_MKENUMS = @GLIB_MKENUMS@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +GSV_API_VERSION = @GSV_API_VERSION@ +GSV_LT_VERSION = @GSV_LT_VERSION@ +GSV_MAJOR_API_VERSION = @GSV_MAJOR_API_VERSION@ +GTKDOC_CHECK = @GTKDOC_CHECK@ +GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ +GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ +GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ +GTKDOC_MKPDF = @GTKDOC_MKPDF@ +GTKDOC_REBASE = @GTKDOC_REBASE@ +GTK_SOURCE_MAJOR_VERSION = @GTK_SOURCE_MAJOR_VERSION@ +GTK_SOURCE_MICRO_VERSION = @GTK_SOURCE_MICRO_VERSION@ +GTK_SOURCE_MINOR_VERSION = @GTK_SOURCE_MINOR_VERSION@ +HIDDEN_VISIBILITY_CFLAGS = @HIDDEN_VISIBILITY_CFLAGS@ +HTML_DIR = @HTML_DIR@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ +INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ +INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ +INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ +INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ +INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ +INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ +INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ +ITSTOOL = @ITSTOOL@ +LCOV = @LCOV@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VALGRIND = @VALGRIND@ +VALGRIND_ENABLED = @VALGRIND_ENABLED@ +VAPIGEN = @VAPIGEN@ +VAPIGEN_MAKEFILE = @VAPIGEN_MAKEFILE@ +VAPIGEN_VAPIDIR = @VAPIGEN_VAPIDIR@ +VERSION = @VERSION@ +WARN_CFLAGS = @WARN_CFLAGS@ +WARN_LDFLAGS = @WARN_LDFLAGS@ +WARN_SCANNERFLAGS = @WARN_SCANNERFLAGS@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +pkgconfigdir = @pkgconfigdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +valgrind_enabled_tools = @valgrind_enabled_tools@ +valgrind_tools = @valgrind_tools@ +SUBDIRS = gtksourceview po data docs tests testsuite win32 +AM_DISTCHECK_CONFIGURE_FLAGS = \ + --enable-gtk-doc \ + --enable-introspection \ + --enable-vala \ + --enable-glade-catalog + +pkgconfig_DATA = gtksourceview-@GSV_API_VERSION@.pc +EXTRA_DIST = \ + gtksourceview.doap \ + gtksourceview.pc.in \ + HACKING \ + MAINTAINERS \ + config.h.win32.in \ + config.h.win32 + +MAINTAINERCLEANFILES = \ + ABOUT-NLS \ + aclocal.m4 \ + compile \ + config.guess \ + config.h.in \ + config.rpath \ + config.sub \ + depcomp \ + gtk-doc.make \ + INSTALL \ + install-sh \ + ltmain.sh \ + m4/ax_append_compile_flags.m4 \ + m4/ax_append_flag.m4 \ + m4/ax_append_link_flags.m4 \ + m4/ax_check_compile_flag.m4 \ + m4/ax_check_link_flag.m4 \ + m4/ax_code_coverage.m4 \ + m4/ax_compiler_flags_cflags.m4 \ + m4/ax_compiler_flags_gir.m4 \ + m4/ax_compiler_flags_ldflags.m4 \ + m4/ax_compiler_flags.m4 \ + m4/ax_is_release.m4 \ + m4/ax_pkg_check_modules.m4 \ + m4/ax_require_defined.m4 \ + m4/ax_valgrind_check.m4 \ + m4/codeset.m4 \ + m4/extern-inline.m4 \ + m4/fcntl-o.m4 \ + m4/gettext.m4 \ + m4/glibc21.m4 \ + m4/glibc2.m4 \ + m4/gtk-3.0.m4 \ + m4/gtk-doc.m4 \ + m4/iconv.m4 \ + m4/intdiv0.m4 \ + m4/intldir.m4 \ + m4/intl.m4 \ + m4/intlmacosx.m4 \ + m4/intmax.m4 \ + m4/introspection.m4 \ + m4/inttypes_h.m4 \ + m4/inttypes-pri.m4 \ + m4/lcmessage.m4 \ + m4/lib-ld.m4 \ + m4/lib-link.m4 \ + m4/lib-prefix.m4 \ + m4/libtool.m4 \ + m4/lock.m4 \ + m4/longlong.m4 \ + m4/lt~obsolete.m4 \ + m4/ltoptions.m4 \ + m4/ltsugar.m4 \ + m4/ltversion.m4 \ + m4/nls.m4 \ + m4/pkg.m4 \ + m4/po.m4 \ + m4/printf-posix.m4 \ + m4/progtest.m4 \ + m4/size_max.m4 \ + m4/stdint_h.m4 \ + m4/threadlib.m4 \ + m4/uintmax_t.m4 \ + m4/visibility.m4 \ + m4/wchar_t.m4 \ + m4/wint_t.m4 \ + m4/xsize.m4 \ + missing \ + mkinstalldirs \ + po/Makevars.template \ + po/Rules-quot \ + po/boldquot.sed \ + po/en@boldquot.header \ + po/en@quot.header \ + po/insert-header.sin \ + po/quot.sed \ + po/remove-potcdate.sed \ + po/remove-potcdate.sin \ + po/stamp-po \ + test-driver \ + `find "$(srcdir)" -type f -name Makefile.in -print` + +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +config.h: stamp-h1 + @test -f $@ || rm -f stamp-h1 + @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +gtksourceview-${GSV_API_VERSION}.pc: $(top_builddir)/config.status $(srcdir)/gtksourceview.pc.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +config.h.win32: $(top_builddir)/config.status $(srcdir)/config.h.win32.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt +install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ + done + +uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" +check-valgrind-local: +check-valgrind-memcheck-local: +check-valgrind-helgrind-local: +check-valgrind-drd-local: +check-valgrind-sgcheck-local: + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz + $(am__post_remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) + +dist-tarZ: distdir + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__post_remove_distdir) + +dist-shar: distdir + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz + $(am__post_remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__post_remove_distdir) + +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build/sub \ + && ../../configure \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + --srcdir=../.. --prefix="$$dc_install_base" \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile $(DATA) config.h +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +check-valgrind: check-valgrind-recursive + +check-valgrind-am: check-valgrind-local + +check-valgrind-drd: check-valgrind-drd-recursive + +check-valgrind-drd-am: check-valgrind-drd-local + +check-valgrind-helgrind: check-valgrind-helgrind-recursive + +check-valgrind-helgrind-am: check-valgrind-helgrind-local + +check-valgrind-memcheck: check-valgrind-memcheck-recursive + +check-valgrind-memcheck-am: check-valgrind-memcheck-local + +check-valgrind-sgcheck: check-valgrind-sgcheck-recursive + +check-valgrind-sgcheck-am: check-valgrind-sgcheck-local + +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr \ + distclean-libtool distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: install-pkgconfigDATA + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-pkgconfigDATA + +.MAKE: $(am__recursive_targets) all install-am install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ + am--refresh check check-am check-valgrind-am \ + check-valgrind-drd-am check-valgrind-drd-local \ + check-valgrind-helgrind-am check-valgrind-helgrind-local \ + check-valgrind-local check-valgrind-memcheck-am \ + check-valgrind-memcheck-local check-valgrind-sgcheck-am \ + check-valgrind-sgcheck-local clean clean-cscope clean-generic \ + clean-libtool cscope cscopelist-am ctags ctags-am dist \ + dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ + dist-xz dist-zip distcheck distclean distclean-generic \ + distclean-hdr distclean-libtool distclean-tags distcleancheck \ + distdir distuninstallcheck dvi dvi-am html html-am info \ + info-am install install-am install-data install-data-am \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-pkgconfigDATA \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-pkgconfigDATA + +.PRECIOUS: Makefile + + +@CODE_COVERAGE_RULES@ + +-include $(top_srcdir)/git.mk + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/NEWS b/NEWS new file mode 100644 index 0000000..7324dd2 --- /dev/null +++ b/NEWS @@ -0,0 +1,1468 @@ +News in 3.24.9, 2018-09-05 +-------------------------- +* New syntax highlighting definition file for: Logtalk. +* Improvements to the syntax highlighting of: Haskell, C++, GLSL, and Markdown. +* Performance improvements to space drawing. +* Missing G_PARAM_DEPRECATED flag was added to :underline property +* Various memory leak fixes. +* Translation updates. + +News in 3.24.8, 2018-06-17 +-------------------------- +* MS Windows: lib shutdown on DLL_PROCESS_DETACH, not DLL_THREAD_DETACH. +* Syntax highlighting: sync all *.lang files from GtkSourceView 4. +* Translation updates. + +News in 3.24.7, 2018-03-14 +-------------------------- +* GtkSourceView class: respect the GtkTextView:accepts-tab property. +* Syntax highlighting: sync all *.lang files from GtkSourceView 4. +* Build system: don't declare functions in AC_TRY_COMPILE. +* Translation updates. + +News in 3.24.6 +-------------- +* New syntax highlighting definition file for: logcat. +* Improvements to the syntax highlighting of: Python and reStructuredText. +* Improvements to the Visual Studio builds. +* Translation updates. + +News in 3.24.5 +-------------- +* Bug fix in gtk_source_view_indent_lines(). +* Improvements to the Visual Studio builds. +* Improvements to the syntax highlighting of: Vala. +* Translation updates. + +News in 3.24.4 +-------------- +* Fix bug when GtkSourceView:indent-width and :tab-width are equal. +* New syntax highlighting definition files for: Swift, Maxima and Kotlin. +* Improvements to the syntax highlighting of: CSS. +* Various other small improvements. +* Translation updates. + +News in 3.24.3 +-------------- +* Improvements to the syntax highlighting of: SPARQL, CSS, BibTeX and LaTeX. + +News in 3.24.2 +-------------- +* Avoid type redefinitions. +* jade.lang: add *.pug to globs. +* Bug fix in LaTeX syntax highlighting. +* Various other small bug fixes. +* Translation updates. + +News in 3.24.1 +-------------- +* Deprecate the 'copy' parameter of the GtkSourceView::move-lines signal. +* Force visual word movements for RTL text with Ctrl+left/right. +* Misc bug fixes. +* Translation update. + +News in 3.24.0 +-------------- +* Translation update + +News in 3.23.91 +--------------- +* Improvements to the Visual Studio builds and add support for Visual Studio + 2017. +* Bug fix in Rust syntax highlighting +* Add mimetype to python3.lang +* Translation updates + +News in 3.23.90 +--------------- +* Bug fix in GtkSourceGutterRendererPixbuf +* Fixes for bugs found by Coverity +* New syntax highlighting definition file for: Django template +* Improvements to the syntax highlighting of: CSS and JavaScript +* Translation updates + +News in 3.23.2 +-------------- + +This version still uses GTK+ 3. A GtkSourceView 3.24 version is planned (still +depending on GTK+ 3), which will be released at the same time as GNOME 3.24 in +March 2017. + +* Docs: add an introduction with the pkg-config name and which GTK+ version is + used. +* Build fixes on MS Windows. +* New syntax highlighting definition files for: ABNF and HAXE. +* Improvements to the syntax highlighting of: JavaScript, PHP, Meson, CSS, ini + and Rust. +* Translation updates. + +News in 3.23.1 +-------------- + +This version still uses GTK+ 3. A GtkSourceView 3.24 version is planned (still +depending on GTK+ 3), but the release date is not yet determined. + +* New class: GtkSourceSpaceDrawer with a matrix property to combine space types + vs locations. The old white space drawing API has been deprecated. +* gtk_source_search_context_set_settings() has been deprecated, the "settings" + property will become construct-only. +* GtkSourceCompletionItem: add a new API and deprecate the old constructors. +* GtkSourceGutter: add get_view() and get_window_type() public functions. +* Build system: do not hardcode the API version (currently 3.0) at as many + places as possible (use a variable instead). +* Bug fixes +* Documentation improvements +* Translation updates + +News in 3.22.0 +-------------- +* Translation updates + +News in 3.21.6 +-------------- +* Improvements to the syntax highlighting of: CSS and Rust +* Translation updates + +News in 3.21.5 +-------------- +* Fix an infinite loop in whitespace drawing +* Translation updates + +News in 3.21.4 +-------------- +* GtkSourceRegion: add functions to add/subtract/intersect two GtkSourceRegions +* GtkSourceRegion: rename functions to add/subtract/intersect a subregion +* GtkSourceRegion: real unit tests +* Whitespace drawing: draw a final newline if the + GtkSourceBuffer:implicit-trailing-newline property is TRUE. +* Whitespace drawing: refactor the code, move the code to a private SpaceDrawer + class. +* Use gconstructor.h to have a DSO constructor that inits i18n, and a + destructor to unref the singletons. +* Use the AX_VALGRIND_CHECK Autotools macro +* SearchContext: send a private signal to the views so that the views can ask + the SearchContext to highlight in priority the visible areas of the buffer + (works only for normal search, not regex search). +* Improvements to the syntax highlighting of: LaTeX +* Various other code improvements +* Translation updates + +News in 3.21.3 +-------------- +* Warn when a secondary public header is #included in external code. + Only should be #included directly. +* Remove the --disable-completion-providers configure option, to always build + the completion providers. There is currently only one completion provider: + GtkSourceCompletionWords, which is not a lot of code and doesn't pull up + additional dependencies. +* Add back the gtksourceview-typebuiltins.h public header, for backward + compatibility. +* Fixes/improvements to the Visual Studio builds +* Improvements to the syntax highlighting of: rpmspec +* Fix a bug in GtkSourceSearchContext +* Various small code and documentation improvements +* Translation updates + +News in 3.21.2 +-------------- +* Make gtk_source_style_apply() public +* GtkSourceSearchContext: add "version 2" of some functions to improve the API, + and deprecate the v1's. +* Fix a critical message when showing a completion window +* Fix a drawing issue with syntax highlighting +* Improvements to the syntax highlighting of: Meson, JavaScript +* Various code improvements and bug fixes +* Documentation improvements +* Build fixes on ARM + +News in 3.21.1 +-------------- +* Export SourceRegion in the public API +* Translation updates + +News in 3.20.2 +-------------- +* Drawing optimizations +* Translation updates + +News in 3.20.1 +-------------- +* Improvements to style schemes +* Export missing public methods +* Translation updates + +News in 3.20.0 +-------------- +* Improvements to the syntax highlighting of: CSS, JavaScript, protobuf, Vala, + imagej, Python 3 and BibTeX +* Adapt code to use GTK_TEXT_VIEW_LAYER_BELOW_TEXT and + GTK_TEXT_VIEW_LAYER_ABOVE_TEXT +* Add a "sourceview" CSS class to all GtkSourceView's +* Fixes to the MSVC build system +* Various other small fixes and improvements +* Translation updates + +News in 3.19.4 +-------------- +* CSS fixes to track GTK+ changes +* Fix completion popup on Wayland +* MSVC build projects +* Misc bug fixes +* Translation updates + +News in 3.19.3 +-------------- +* Many fixes to track GTK+ changes +* Rework symbol visibility handling +* Other small improvements +* Translation updates + +News in 3.19.2 +-------------- +* Some CSS adjustments to track GTK+ changes +* Add API to get the GtkSourceView version +* Other small improvements +* Translation update + +News in 3.19.1 +-------------- +* New class: GtkSourceTag with a draw-spaces property +* Drop build dependency on intltool, use upstream gettext and ITS Tool instead +* Completion windows: don't add space for scrollbars +* Do not show undo/redo in context menu if undo/redo is disabled +* Bracket matching: several bug fixes, unit tests written, code simplified +* Other small code improvements +* Translation updates + +News in 3.18.1 +-------------- +* Misc bug fixes +* Translation updates + +News in 3.18.0 +-------------- +* Minor improvement to the CSS syntax highlighting +* Translation updates + +News in 3.17.7 +-------------- +* Handle creating pixbufs for HiDPI resolutions +* Improvements to the Octave and Matlab syntax highlighting +* Other various code improvements +* Translation updates + +News in 3.17.6 +-------------- +* Search and replace: fix bug with regular expressions containing look-ahead + assertions. +* Add some missing GI annotations +* A few adjustments to the build system +* Translation updates + +News in 3.17.5 +-------------- +* Support symbolic icons in the completion API +* New lang or improved lang files: Rust, Meson, C, protobuf +* Revamped build system (drop gnome-common dependency) +* Misc bug fixes +* Translation updates + +News in 3.17.4 +-------------- +* Add .rej files as another version of diff file +* Improvements to lang files: Apache Pig, rpmspec +* Misc bug fixes +* Translation updates + +News in 3.17.3 +-------------- +* Add a few more functions to GtkSourceFile +* Add the "smart-backspace" property +* Misc bug fixes +* Translation updates + +News in 3.17.2 +-------------- +* New widget: GtkSourceMap +* Set a GtkTextTag name for context classes (no-spell-check, etc) +* Add gtk_source_buffer_sort_lines() +* Style schemes: + * Support "single", "double" etc for the underline attribute + * Support underline-color +* Improvements to lang files: Ocaml, C++ header and Shell +* Translation updates + +News in 3.17.1 +-------------- +* New public function: gtk_source_encoding_get_default_candidates() +* Add g_autoptr autocleanup support +* Add lang files for (basic) CSV and jade template +* Improvements to lang files: C, CMake, GDB log, JavaScript, C#, F#, + VB.net and CSS +* Translation updates + +News in 3.16.1 +-------------- +* Update CMake language spec +* Add a "path" class for contexts with a file name +* Performance improvements for groups of text insertions/deletions +* Fix bug with symbolic icons and dark GTK+ theme +* Translation updates + +News in 3.16.0 +-------------- +* A few bug fixes and various other improvements +* Translation updates + +News in 3.15.91 +--------------- +* Fix a crash when destroying the widget during a search +* Add some signals to bind keyboard actions +* Various other improvements +* Translation updates + +News in 3.15.90 +--------------- +* Provide a way to draw background patterns (a grid) +* Support incrementing and decrementing numbers +* Various other improvements + +News in 3.15.3 +-------------- +* Better word boundaries for word selection (double-click) and word movements + (ctrl+arrow, shift+ctrl+arrow, ctrl+backspace, etc). +* Add style scheme chooser widgets: GtkSourceStyleSchemeChooser (interface), + GtkSourceStyleSchemeChooserButton and GtkSourceStyleSchemeChooserWidget. +* Add gtk_source_view_indent_lines() and gtk_source_view_unindent_lines(). +* Add the GtkSourceView::move-to-matching-bracket action signal. +* Add gtk_source_buffer_join_lines(). +* Gutter: use current line background color for current line. +* Add syntax highlighting support for Apache Thrift. +* Various other improvements and bug fixes +* Translation updates + +News in 3.15.2 +-------------- +* Undo/Redo: restore selection +* Documentation improvements +* Some GtkSourceGutter code refactoring +* Syntax highlighting for Apache Pig 0.12 + +News in 3.15.1 +-------------- +* Search: allow caller to choose a style for text matches +* gtk_source_completion_context_get_iter() now returns a gboolean to tell if + the GtkTextIter is correctly set. For a more robust code, it is recommended + to use the return value. +* Improvements to the Lua and Yacc syntax highlighting +* Translation updates + +News in 3.14.1 +-------------- +* Fix UndoManager with a new implementation +* Various other improvements +* Translation updates + +News in 3.14.0 +-------------- +* Translation updates + +News in 3.13.91 +--------------- +* Improved Mac OS X support +* Gutter improvements +* Various other improvements and code clean-up +* Translation updates + +News in 3.13.90 +--------------- +* Adjustments to the file loading and saving API: + - Make gtk_source_encoding_get_default_candidates() private + - Replace gtk_source_encoding_foreach() by gtk_source_encoding_get_all() + The file loading and saving API can be considered stable now. + +* Add Vala bindings +* Various other improvements +* Translation updates + +News in 3.13.3 +-------------- +* Extend the api to obtain candidate encodings +* Rework drawing of spaces and margins (requires new Gtk+) +* Various other improvements and bugfixes +* Translation updates + +News in 3.13.2 +-------------- +* New feature: file loading and saving +* Split testfiles.sh to tests/syntax-highlighting/ +* GtkSourceView is now fully relicensed to LGPL +* Various other improvements and bugfixes +* Translation updates + +News in 3.13.1 +-------------- +* Improvements to the words completion provider +* Completion window sizing fixes +* Improvements to some lang files +* Various other improvements and bugfixes +* Updated translations + +News in 3.12.1 +-------------- +* Renovate test-widget +* Various improvements and bugfixes +* Updated translations + +News in 3.12.0 +-------------- +* Small improvements to the documentation +* Updated translations + +News in 3.11.91 +--------------- +* Updated translations + +News in 3.11.90 +--------------- +* Add syntax highlighting for LLVM IR and Sweave +* Improvements to some lang files +* Updated translations + +News in 3.11.4 +-------------- +* Add the popular Solarized style schemes +* Improvements to some lang files and a new lang file for lex +* Optimize the draw-spaces code +* Various fixes to the completion framework +* Misc bugfixes +* Updated translations + +News in 3.11.3 +-------------- +* Font scaling support for headings/titles in LaTeX and HTML +* Add Change Case submenu to the right click context menu +* Add ANS Forth 94 syntax highlighting +* Misc bugfixes +* Updated translations + +News in 3.11.2 +-------------- +* Add API to change text case +* Add reStructuredText and yaml syntax highlighting +* Improve LaTeX, m4 and D syntax highlighting +* Documentation improvements (including best practices for language definition files) +* Installed tests +* Misc bugfixes +* Updated translations + +News in 3.11.1 +-------------- +* Deprecate the Gutter:xpad and Gutter:ypad properties +* Deprecate gtk_source_gutter_get_window() +* Better implementation of GtkSourceMarks (private class GtkSourceMarksSequence) +* Style schemes: more visible right margin +* Documentation improvements +* Misc bugfixes +* Updated translations + +News in 3.10.0 +-------------- +* Small bugfix +* Updated translations + +News in 3.9.92 +-------------- +* SearchSettings: change default value of wrap-around to FALSE +* Misc bugfixes +* Updated translations + +News in 3.9.91 +-------------- +* Improvements to the completion +* API break for the search and replace +* Deprecate the GtkSourceMarkAttributes:stock-id property +* Misc bugfixes +* Updated translations + +News in 3.9.90 +-------------- +* Modify the search and replace API: SearchContext and SearchSettings classes +* Regular expression search +* Misc bugfixes +* Updated translations + +News in 3.9.4 +------------- +* Warning: the search and replace API is unstable +* Misc bugfixes +* Updated translations + +News in 3.9.3 +------------- +* Add a higher-level asynchronous search and replace API +* Deprecate gtk_source_completion_item_new_from_stock() +* Deprecate the GtkSourceGutterRendererPixbuf:stock-id property +* Updated translations + +News in 3.9.2 +------------- +* Add syntax highlighting for the Julia, mediawiki and Scala languages +* Improvements to the word completion provider +* Add the GtkSourceCompletionWords:activation property +* More compact completion popup window +* Misc bugfixes +* Updated translations + +News in 3.9.1 +------------- +* Deprecate the GtkSourceCompletionInfo::before-show signal +* Hide CompletionInfo when focus-out-event on the attached-to widget +* Improvements to the main completion window +* Some code improvements to the words completion provider +* Improvements to the C++ and Perl language specs +* Documentation improvements +* Misc bugfixes +* Updated translations + +News in 3.8.1 +------------- +* Improvements to the LaTeX and Perl language specs +* Update to gtk-mac-integration 2.0 API +* More unit tests +* Misc bugfixes +* Updated translations + +News in 3.8.0 +------------- +* Add Libtool versioning. There was an ABI break during this development + cycle, because some private functions were accidentally exported. So + the Libtool's -version-info is bumped from 0:0:0 to 1:0:0. On + GNU/Linux, this results in a version bump of the soname. +* Updated translations + +News in 3.7.92 +-------------- +* New style id for warnings +* Improvements to the completion code and documentation +* Misc bugfixes +* Updated translations + +News in 3.7.91 +-------------- +* Simplify code for the completion +* Improvements of the Perl, R and Ruby language specs +* Misc bugfixes +* Updated translations + +News in 3.7.90 +-------------- +* Improvements in completion +* Add Modelica language spec +* Misc bugfixes +* Updated translations + +News in 3.7.3 +------------- +* Deprecate gtk_source_completion_move_window() +* Deprecate gtk_source_completion_info_get_widget() +* Deprecate gtk_source_completion_info_set_widget() +* CompletionInfo: always a natural size +* Simplify internal code for the completion (new CompletionModel) +* Fixes for the style schemes and GtkSourceMark +* Other misc bugfixes +* Updated translations + +News in 3.7.2 +------------- +* Improved unit tests and code coverage support +* Misc bugfixes +* Updated translations + +News in 3.7.1 +------------- +* Add Bluespec SystemVerilog syntax highlighter +* Improvements in completion +* Add language spec for IDL +* Lots of fixes in gtk doc +* Misc bugfixes +* Updated translations + +News in 3.6.0 +------------- +* Updated translations + +News in 3.5.4 +------------- +* Misc bugfixes +* Updated translations + +News in 3.5.3 +------------- +* New ActionScript, mxml and J languages +* Misc bugfixes +* Updated translations + +News in 3.5.2 +------------- +* Misc bugfixes + +News in 3.5.1 +------------- +* New Puppet language +* Improvements in Go Language +* Misc bugfixes +* Updated translations + +News in 3.4.2 +------------- +* Improvements to completion code +* Misc bugfixes +* Updated translations + +News in 3.4.1 +------------- +* Fix problems with the completion popup when headers are hidden +* Misc bugfixes +* Updated translations + +News in 3.4.0 +------------- +* Updated translations + +News in 3.3.5 +------------- +* Misc bugfixes +* Updated translations + +News in 3.3.4 +------------- +* Misc bugfixes +* Updated translations + +News in 3.3.3 +------------- +* Python3 lang file +* Win32 build fixes +* Misc bugfixes +* Updated translations + +News in 3.3.2 +------------- +* Introduce gtk_source_language_get_style_fallback +* Refactoring and clenaup +* Misc bugfixes +* Updated translations + +News in 3.3.1 +------------- +* Change IgeMacIntegration to GtkOSXApplication +* Allow for multiple GDK backends +* Sort schemes alphabetically +* Sort the languages alphabetically +* Misc bugfixes +* Updated translations + +News in 3.2.2 +------------- +* Misc bugfixes + +News in 3.2.1 +------------- +* New JavaScript Object Notation lang file +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 3.2.0 +------------- +* Updated translations + +News in 3.1.6 +------------- +* New Automake lang file +* New protobuf lang file +* Misc bugfixes +* Updated translations + +News in 3.1.5 +------------- +* Misc bugfixes +* Updated translations + +News in 3.1.4 +------------- +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 3.1.3 +------------- +* New Markdown lang file +* New Standard ML lang file +* Misc bugfixes +* Updated translations + +News in 3.1.2 +------------- +* Misc bugfixes +* Updated translations + +News in 3.1.1 +------------- +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 3.0.2 +------------- +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 3.0.1 +------------- +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 3.0.0 +------------- +* Updated translations + +News in 2.91.9 +------------- +* Use the GTK_SOURCE_ prefix also for all the macros +* Updated translations + +News in 2.91.8 +------------- +* Misc bugfixes + +News in 2.91.7 +------------- +* Misc bugfixes + +News in 2.91.6 +------------- +* Misc bugfixes +* Updated translations + +News in 2.91.5 +------------- +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.91.4 +------------- +* Highlight C standard streams and signals +* GtkSourceView is not a factory of categories now +* Fix style problems +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.91.3 +------------- +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.91.2 +------------- +* Improved Gutter support +* New languages: Cobol, GO, Scilab +* Misc bugfixes +* Updated translations + +News in 2.91.1 +------------- +* Removed SourceIter, caseless search is now in gtk +* Adapt to latest gtk changes +* Misc bugfixes +* Updated translations + +News in 2.91.0 +------------- +* Added SystemVerilog language +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.90.4 +------------- +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.90.3 +------------- +* Bump version to 2.90: we are now targeting gtk3. + This release is parallel installable with GtkSourveView 2 +* Misc bugfixes +* Updated translations + +News in 2.11.2 +------------- +* Misc bugfixes +* Updated translations + +News in 2.11.1 +------------- +* Added introspection support +* Misc bugfixes +* Updated translations + +News in 2.10.1 +------------- +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.10.0 +------------- +* Misc bugfixes +* Updated translations + +News in 2.9.9 +------------- +* Distribute a catalog for glade3 +* Misc bugfixes +* Updated translations + +News in 2.9.8 +------------- +* Bugfixes in the "words" completion provider +* Misc bugfixes +* Updated translations + +News in 2.9.7 +------------- +* Remove a leftover in the UndoManager API + +News in 2.9.6 +------------- +* Changes to the completion API to allow better language bindings +* Add API to set a custom UndoManager on the buffer +* Misc bugfixes +* Updated translations + +News in 2.9.5 +------------- +* Misc bugfixes +* Updated translations + +News in 2.9.4 +------------- +* Implement context classes and use them to mark strings, + comments, keywords and regions where spell-check is disabled +* More work on completion +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.9.3 +------------- +* Crasher bugfixes in word completion provider +* Misc bugfixes for win32 +* Smarter autoindentation +* New language: SPARQL +* Misc bugfixes +* Updated translations + +News in 2.9.2 +------------- +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.9.1 +------------- +* Added draw spaces for leading, text and trailing spaces +* Merged GtkSourceCompletion branch +* Updated translations + +News in 2.8.1 +------------- +* Misc bugfixes in gutter tooltip rendering +* Updated translations + +News in 2.8.0 +------------- +* Misc bugfixes +* Updated translations + +News in 2.7.5 +------------- +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.7.4 +------------- +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.7.3 +------------- +* Misc bugfixes + +News in 2.7.2 +------------- +* Add GtkSourceGutter api to customize gutter drawing +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.7.1 +------------- +* Add tooltips to GtkSourceMarks +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.6.2 +------------- +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.6.1 +------------- +* Improvements to some of the lang files +* Updated translations + +News in 2.6.0 +------------- +* Improvements to some of the lang files +* Updated translations + +News in 2.5.6 +------------- +* Misc bugfixes +* Updated translations + +News in 2.5.5 +------------- +* New "cobalt" style scheme +* Misc bugfixes +* Updated translations + +News in 2.5.4 +------------- +* Improvements to some of the lang files +* Updated translations + +News in 2.5.3 +------------- +* Improvements to some of the lang files +* Updated translations + +News in 2.5.2 +------------- +* Misc bugfixes +* Improvements to some of the lang files +* Updated translations + +News in 2.5.1 +------------- +* Misc bugfixes +* Improvements to some of the lang files +* Updated translations + +News in 2.4.1 +------------- +* Fix a crash when inserting images in the buffer +* Improvements to some of the lang files +* Updated translations + +News in 2.4.0 +------------- +* Updated translations + +News in 2.3.3 +------------- +* Improvements to some of the lang files +* Updated translations + +News in 2.3.2 +------------- +* Misc bugfixes +* Improvements to some of the lang files +* Updated translations + +News in 2.3.1 +------------- +* Misc bugfixes +* Updated translations + +News in 2.3.0 +------------- +* Add function to guess the language for a given filename and mime type + (bump glib dependency to 2.14 that includes gio, remove gnome-vfs dep) +* Allow to set background color of paragraphs with marks +* Support drawing white spaces +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.2.2 +------------- + +* Improvements to some of the lang files +* Misc bugfixes +* Updated translations + +News in 2.2.1 +------------- + +* Improve keybindings +* Misc bugfixes +* Updated translations + +News in 2.2.0 +------------- + +* Misc bugfixes +* Updated translations + +News in 2.1.3 +------------- + +* Misc bugfixes +* Updated translations + +News in 2.1.2 +------------- + +* Fix a GtkSourceMark API issue +* Updated translations + +News in 2.1.1 +------------- + +* Misc bugfixes +* Updated translations + +News in 2.1.0 +------------- + +* New gtk-print based printing API +* New GtkTextMark-based GtkSourceMark API +* Misc bugfixes +* Updated translations + +News in 2.0.0 +------------- + +* Updated translations + +News in 1.90.4 +-------------- + +* Many improvements to all the lang files +* Many minor API tweaks +* Misc bugfixes +* Updated translations + +News in 1.90.3 +-------------- + +* New default set of styles used to define a style scheme +* Many improvements to all the lang files, ruby and perl lang + files in particular. +* Some API tweaks +* Misc bugfixes + +News in 1.90.2 +-------------- + +* Library is now LGPL (some lang files aren't yet) +* Support replacing contexts +* Support symbolic colors in schemes +* Add tango style scheme +* Some API tweaks +* Many lang file updates +* Misc bugfixes + +News in 1.90.1 +-------------- + +* GtkSourceStyle is now a gobject +* Be more careful about Language and LanguageManager lifecycles: add + gtk_source_[language|style_scheme]_manager_get_default to obtain + managers object owned by gtksourceview +* Most of the files are now officially licensed under LGPL, still + waiting for a few approval before completely switching the license. +* Port to GRegex +* Misc lang file updates +* Misc bugfixes + +News in 1.90.0 +-------------- + +This marks the road to GtkSourceView 2.0, and breaks the API. It is still +considererd API-unstable. + +* API update/break +* New highlighting and theming engines (Yevgen Muntyan, Marco Barisione) +* GnomePrint-based print API removal + +News in 1.8.6 +------------- + +* Mark Undo/Redo insensitive when the view is not editable (Carlos Garnacho) +* Fix current line highlightging drawing artifacts (Yevgen Muntyan) +* Updated translations + +News in 1.8.5 +------------- + +* Updated translations + +News in 1.8.4 +------------- + +* RPM highlighting (Konstantin Ryabitsev) +* Fix a problem with search in accented words (Yevgen Muntyan) +* Misc lang file fixes +* Updated translations + +News in 1.8.3 +------------- + +* Added docbook lang file (Joachim Noreiko) +* Added OCaml lang file (Eric Cooper) +* Cleanup some mime types in lang files (Paolo Maggi) +* Updated translations + +News in 1.8.2 +------------- + +* Fixed bug #360495 – Errors in Java/Verilog syntax files (Jeff Walden) +* Fixed bug #380996 – language.dtd needs more comments (Leonardo Ferreira + Fontenelle and Paolo Maggi) +* Added a RNG schema for the .lang file format (Paolo Maggi) +* Fixes bug #375515 – allow fullstop in xml tag highlighting (Carey O'Shea) +* Updated translations + +News in 1.8.1 +------------- + +* Fixed #357447 – Missing break in gtk_source_tag_set_property() (Kouhei Sutou) +* Fixed #357746 – "Insert spaces instead of tabs" doesn't work (Paolo Borelli) +* Updated translations + +News in 1.8.0 +------------- + +* Added text/x-gettext-translation-template to the list of + mime-types in po.lang +* Updated translations + +News in 1.7.2 +------------- + +* add an 'indent-on-tab' property to indent the selected text + using the tab key +* highlight fortran operators +* Updated translations + +News in 1.7.1 +------------- + +* New Lang files (D, boo) +* Updated translations + +News in 1.6.1 +------------- + +* Updated Lang files (php, ruby, perl, xml, .desktop) +* Consume all button press events on the line numbers margin +* Updated translations + +News in 1.6.0 +------------- + +* Updated translations + +News in 1.5.7 +------------- + +* Updated translations + +News in 1.5.6 +------------- + +* fix .lang files lookup from xdg directories. + +News in 1.5.5 +------------- + +* Requires gtk+ 2.8.x +* Fixed bug #309663 – gcc 4.01 compiler treats pointer target + warnings as errors (Marco Barisione) +* Added scheme.lang (Paolo Borelli) +* Allow to specify both 'u' and 'r' modifiers to python strings at + the same time (Steve Frécinaux) +* Add iterators to text region and use them (Paolo Borelli and Paolo Maggi) +* Use cairo to draw the right margin (Jeroen Zwartepoorte) +* Fixed bug #321252 - Clicking gedit line numbers should jump to line (Paolo + Borelli and Paolo Maggi) +* Fixed bug 312241 – .lang files in homedir take priority over $prefix (Guillaume + Desmottes and Paolo Borelli) +* Fixed bug #318577 – win32 port (Tor Lillqvist, Paolo Borelli and Paolo Maggi) +* Updated translations + +News in 1.5.4 +------------- + +* Fixed bug #170604 – syntax for GNU Octave + +News in 1.5.3 +------------- + +* Fixed bug #321898 - fix for division by zero bug (not checking + g_timer_elapsed() return value) +* Fixed bug #323999 - perl inline pod not properly highlighted +* Fixed bug #323750 - CSS highlighting missing "font" property +* Fixed bug #316612 - Ruby coloration problems +* Fixed bug #316587 - PHP syntax file should be in the "Scripting" section + instead of "Sources") +* Fixed bug #316330 - Ada Syntax highlighting is incorrect +* Fixed bug #168090 - Recognise fortran line comments better +* Added a --disable-gnomeprint configuration option +* Fixed i18n problem introduced in 1.5.2 +* Added changelog.lang +* Updated translations + +News in 1.5.2 +------------- + +* Fix an off by one error in Lang directory lookup + +News in 1.5.1 +------------- + +* Lang files are now loaded from the locations specified in XDG_DATA_DIRS +* Bug Fixes +* New and updated translations. + +News in 1.4.2 +------------- + +* New and updated translations. + +News in 1.4.1 +------------- + +* Include the html documentation in the tarball. +* Updated translations. + +News in 1.4.0 +------------- + +* Bug fixes (Paolo Maggi and Paolo Borelli) +* New and updated translations. + +News in 1.3.93 +-------------- + +* Bug fixes (Paolo Maggi and Paolo Borelli) +* New and updated translations. + +News in 1.3.92 +-------------- + +* New and updated translations. + +News in 1.3.91 +-------------- + +* use G_NORMALIZE_NFD in caseless search, part of bug #303239 (Paolo Maggi) +* allow GtkSourceView derivatives to override the key press (Paolo Borelli) +* Makefile.lang (Ricardo Lenz, Paolo Borelli) +* Updates to SQL, C#, javascript and XML language specifications. +* New and updated translations. + +News in 1.2.1 +------------- + +* Plug small memory leaks (Yevgen Muntyan) +* Fix unitialized variable (Marco Barisione) +* Use the proper mime type for ruby files (Paolo Maggi) +* Small improvements to sql.lang and fortran.lang +* New and updated translations. + +News in 1.2.0 +------------- + +* Updated translations. + +News in 1.1.93 +-------------- + +* Partially fixed bug bug #168247 (wrong selection of characters when + searching for single characters) +* Fixed bug #164066 (Highlight Current Line Bug with Pixmap Based Themes) +* Fixed bug #168229 (disconnect tag table signal handlers in destructor) +* Rewritten idl.lang +* Added some missing items to php.lang +* Updated translations. + +News in 1.1.92 +-------------- + +* Bug fixes and update translations. + +News in 1.1.91 +-------------- + +* Undoing/Redoing to a non-modified state unset the modified flag. +* Added some missing documentation and improved existing one. +* Bug fixes and update translations. + +News in 1.1.90 +-------------- + +* Current line highlighting +* New languages specs for TCL, Nemerle, VHDL, sh, .ini, gtkrc. +* Support for Undo key in Sun keyboards +* Bug fixes and updated translations. + +News in 1.1.1 +------------- + +* New languages specs for fortran, css, javascript and pascal. +* Bug fixes and updated translations. + +News in 1.1.0 +------------- + +* Use Pango for printing. +* New languages specs for Ruby, LUA, Perl's POD, VB.NET, Haskell and + Texinfo. +* Bug fixes and updated translations. + +News in 1.0.0 +------------- + +* Bug fixes and updated translations. + +News in 0.9.2 +------------- + +* Bug fixes and updated translations. + +News in 0.9.1 +------------- + +* Bug fixes. +* XML and HTML .lang files now highlight strings using simple patterns. +* Beginning of line and end of line are now correctly matched, even if + the slice of text doesn't include the newlines. +* "Others" style is now deprecated. + +News in 0.9.0 +------------- + +* Miscellaneous Bugfixes + +News in 0.8.0 +------------- + +* Highlighting spec files for PHP, Verilog, MSIL, C# and SQL. +* Migrated test application to Gtk 2.3 (UI and file selector). + +News in 0.7.0 +------------- + +* A bunch of small bugfixes +* Replaced deprecated calls for glib 2.3 +* Multiline backward search works now +* patterns are now limited to 250 elements (more cause + trouble with GNU regex) + +News 0.4.0 -> 0.5.0 +------------------- + +* Removed hack for bug #81893 since it's now fixed in Gtk+ +* Added "style_changed" signal to GtkSourceStyleScheme to signal the + buffer that a style has changed + +News 0.3.0 -> 0.4.0 +------------------- + +* Added get_style_names method to the GtkSourceStyleScheme interface +* New method gtk_source_language_get_id +* Added the id arg to all constructors of gtksourcetag.[ch] +* Added ID and tag_style properties to GtkSourceTag +* Fixed the .pc.in file +* Fixes to the printing code + +News 0.2.1 -> 0.3.0 +------------------- + +* Printing support +* Caseless search functions gtk_source_iter_search_forward/backward +* API reference documentation building infrastructure +* Added support for translation of user visible strings in language + spec files +* gtk_source_buffer_find_bracket_match has been renamed to + gtk_source_iter_find_matching_bracket + +News 0.2.0 -> 0.2.1 +------------------- + +* Dropped strict libgnome dependency (some Gnome libraries are still needed to + build the tests, but those are now optional) +* Regular expression syntax changed to Extended POSIX + GNU operators +* Generate enums and flags for introspection and language bindings +* Copy of GNU regular expression library included for platforms which aren't + based on the GNU C library (bug #112517) +* grab_focus no longer scrolls the widget to the cursor (workaround Gtk+ + bug #81893) + +News 0.1.0 -> 0.2.0 +------------------- + +* src directory renamed to gtksourceview for proper header + namespacing + +News 0.0.3 -> 0.1.0 +------------------- + +* API has been completely revised +* New language and manager objects to set regular expressions for + syntax highlighting from XML files +* New improved highlighting engine +* Rewritten test application which demonstrates most important features +* Markers API have been redesigned +* Text style schemes for highlighted elements +* The view can draw a vertical line indicating a right margin +* Smart HOME/END keys move to the first/last character in the line + before moving to the real begin/end +* Auto indentation + +News 0.0.2 -> 0.0.3 +---------------- + +* Undo support using begin/end_user_action in GtkTextBuffer. +* Implemented gtk_source_buffer_convert_to_html the name says what it does :-) +* more auto indent support/bugfixes: On an keypress it will automatic inserting whitespaces before/after on operator characters like [=<>!], comma [,] and begin parantes[(]. This is hardcoded values and will probadly only work correcly on C/C++/Java/python or similar programing languages syntax +* bugfixes. + +News 0.0.1 -> 0.0.2 +---------------- + +* Auto indent support +* bugfixes + +News 0.0.1 +-------- + +* Syntax/Pattern highlighting +* Bracket matching support +* Show line numbers in margin diff --git a/README b/README new file mode 100644 index 0000000..faede97 --- /dev/null +++ b/README @@ -0,0 +1,89 @@ +General Information +=================== + +This is version 3.24.9 of GtkSourceView. + +GtkSourceView is a text widget that extends the standard GTK+ text widget +GtkTextView. + +It improves GtkTextView by implementing syntax highlighting and other +features typical of a source code editor. + +The official web site is: + + https://wiki.gnome.org/Projects/GtkSourceView + +The GtkSourceView library is free software and is released under the terms of +the GNU Lesser General Public License. + + +Installation +============ + +GtkSourceView requires GLib >= 2.48, GTK+ >= 3.20 and libxml2 >= 2.6. + +Simple install procedure: + + $ ./configure + $ make + [ Become root if necessary ] + $ make install + +See the file 'INSTALL' for more detailed information. + +From the Git repository, the 'configure' script and the 'INSTALL' file are not +yet generated, so you need to run 'autogen.sh' instead, which takes the same +arguments as 'configure'. + +To build the latest version of GtkSourceView from Git, Jhbuild can be used: + + https://wiki.gnome.org/Projects/Jhbuild + + +How to report bugs +================== + +Bugs should be reported to the GNOME bug tracking system: + + https://bugzilla.gnome.org/page.cgi?id=browse.html&product=gtksourceview + +You will need to create an account for yourself. + +Please search to see if the bug is not already reported. If not, file a new bug +and include: + +* Information about your system. For instance: + + - What version of GtkSourceView + - What operating system and version + - What version of GTK+ and GLib + + And anything else you think is relevant. + +* How to reproduce the bug. + +* If the bug was a crash, the exact text that was printed out when the + crash occurred, with a backtrace from gdb with debug symbols. See: + https://wiki.gnome.org/Community/GettingInTouch/Bugzilla/GettingTraces + + +Patches +======= + +Patches should also be submitted to bugzilla.gnome.org. If the patch +fixes an existing bug, add the patch as an attachment to that bug +report. + +Otherwise, enter a new bug report that describes the problem the patch +fixes, and attach it to that bug report. + +Patches should be created with the git format-patch command. +Please follow the coding style described in the HACKING file. + +If you are interested in helping us to develop GtkSourceView, please see the +file 'MAINTAINERS' for contact information and/or send a message to +the GtkSourceView mailing list. See also the file 'HACKING' for +information about our git guidelines. + + +The GtkSourceView team. diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..f57fcae --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,1238 @@ +# generated automatically by aclocal 1.15.1 -*- Autoconf -*- + +# Copyright (C) 1996-2017 Free Software Foundation, Inc. + +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) + +# Copyright (C) 2002-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.15' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.15.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.15.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is '.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each '.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# AM_EXTRA_RECURSIVE_TARGETS -*- Autoconf -*- + +# Copyright (C) 2012-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_EXTRA_RECURSIVE_TARGETS +# -------------------------- +# Define the list of user recursive targets. This macro exists only to +# be traced by Automake, which will ensure that a proper definition of +# user-defined recursive targets (and associated rules) is propagated +# into all the generated Makefiles. +# TODO: We should really reject non-literal arguments here... +AC_DEFUN([AM_EXTRA_RECURSIVE_TARGETS], []) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. +m4_define([AC_PROG_CC], +m4_defn([AC_PROG_CC]) +[_AM_PROG_CC_C_O +]) + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi +dnl The trailing newline in this macro's definition is deliberate, for +dnl backward compatibility and to allow trailing 'dnl'-style comments +dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. +]) + +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) + +# Copyright (C) 2003-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAINTAINER_MODE([DEFAULT-MODE]) +# ---------------------------------- +# Control maintainer-specific portions of Makefiles. +# Default is to disable them, unless 'enable' is passed literally. +# For symmetry, 'disable' may be passed as well. Anyway, the user +# can override the default with the --enable/--disable switch. +AC_DEFUN([AM_MAINTAINER_MODE], +[m4_case(m4_default([$1], [disable]), + [enable], [m4_define([am_maintainer_other], [disable])], + [disable], [m4_define([am_maintainer_other], [enable])], + [m4_define([am_maintainer_other], [enable]) + m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) +AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode's default is 'disable' unless 'enable' is passed + AC_ARG_ENABLE([maintainer-mode], + [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], + am_maintainer_other[ make rules and dependencies not useful + (and sometimes confusing) to the casual installer])], + [USE_MAINTAINER_MODE=$enableval], + [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST([MAINT])dnl +] +) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Copyright (C) 1999-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_CC_C_O +# --------------- +# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC +# to automatically call this. +AC_DEFUN([_AM_PROG_CC_C_O], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +AC_LANG_PUSH([C])dnl +AC_CACHE_CHECK( + [whether $CC understands -c and -o together], + [am_cv_prog_cc_c_o], + [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i]) +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +AC_LANG_POP([C])]) + +# For backward compatibility. +AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) + +# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_RUN_LOG(COMMAND) +# ------------------- +# Run COMMAND, save the exit status in ac_status, and log it. +# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) +AC_DEFUN([AM_RUN_LOG], +[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD + ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + (exit $ac_status); }]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) + +# Copyright (C) 2009-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor 'install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in "make install-strip", and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +# +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' + +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + + [m4_case([$1], + [ustar], + [# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi + AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi], + + [pax], + [], + + [m4_fatal([Unknown tar format])]) + + AC_MSG_CHECKING([how to create a $1 tar archive]) + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_$1-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi + done + rm -rf conftest.dir + + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([m4/ax_append_compile_flags.m4]) +m4_include([m4/ax_append_flag.m4]) +m4_include([m4/ax_append_link_flags.m4]) +m4_include([m4/ax_check_compile_flag.m4]) +m4_include([m4/ax_check_link_flag.m4]) +m4_include([m4/ax_code_coverage.m4]) +m4_include([m4/ax_compiler_flags.m4]) +m4_include([m4/ax_compiler_flags_cflags.m4]) +m4_include([m4/ax_compiler_flags_gir.m4]) +m4_include([m4/ax_compiler_flags_ldflags.m4]) +m4_include([m4/ax_is_release.m4]) +m4_include([m4/ax_pkg_check_modules.m4]) +m4_include([m4/ax_require_defined.m4]) +m4_include([m4/ax_valgrind_check.m4]) +m4_include([m4/gettext.m4]) +m4_include([m4/gtk-3.0.m4]) +m4_include([m4/gtk-doc.m4]) +m4_include([m4/iconv.m4]) +m4_include([m4/intlmacosx.m4]) +m4_include([m4/introspection.m4]) +m4_include([m4/lib-ld.m4]) +m4_include([m4/lib-link.m4]) +m4_include([m4/lib-prefix.m4]) +m4_include([m4/libtool.m4]) +m4_include([m4/ltoptions.m4]) +m4_include([m4/ltsugar.m4]) +m4_include([m4/ltversion.m4]) +m4_include([m4/lt~obsolete.m4]) +m4_include([m4/nls.m4]) +m4_include([m4/pkg.m4]) +m4_include([m4/po.m4]) +m4_include([m4/progtest.m4]) +m4_include([m4/vapigen.m4]) diff --git a/compile b/compile new file mode 100755 index 0000000..de0005d --- /dev/null +++ b/compile @@ -0,0 +1,348 @@ +#!/bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2016-01-11.22; # UTC + +# Copyright (C) 1999-2017 Free Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \ + icl | *[/\\]icl | icl.exe | *[/\\]icl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC0" +# time-stamp-end: "; # UTC" +# End: diff --git a/config.guess b/config.guess new file mode 100755 index 0000000..717b228 --- /dev/null +++ b/config.guess @@ -0,0 +1,1476 @@ +#!/bin/sh +# Attempt to guess a canonical system name. +# Copyright 1992-2017 Free Software Foundation, Inc. + +timestamp='2017-08-08' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). +# +# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess +# +# Please send patches to . + + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright 1992-2017 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +case "${UNAME_SYSTEM}" in +Linux|GNU|GNU/*) + # If the system lacks a compiler, then just pick glibc. + # We could probably try harder. + LIBC=gnu + + eval $set_cc_for_build + cat <<-EOF > $dummy.c + #include + #if defined(__UCLIBC__) + LIBC=uclibc + #elif defined(__dietlibc__) + LIBC=dietlibc + #else + LIBC=gnu + #endif + EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` + ;; +esac + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ + /sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || \ + echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + earmv*) + arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'` + endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'` + machine=${arch}${endian}-unknown + ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently (or will in the future) and ABI. + case "${UNAME_MACHINE_ARCH}" in + earm*) + os=netbsdelf + ;; + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # Determine ABI tags. + case "${UNAME_MACHINE_ARCH}" in + earm*) + expr='s/^earmv[0-9]/-eabi/;s/eb$//' + abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"` + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}${abi}" + exit ;; + *:Bitrig:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:LibertyBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-libertybsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:Sortix:*:*) + echo ${UNAME_MACHINE}-unknown-sortix + exit ;; + *:Redox:*:*) + echo ${UNAME_MACHINE}-unknown-redox + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE=alpha ;; + "EV4.5 (21064)") + UNAME_MACHINE=alpha ;; + "LCA4 (21066/21068)") + UNAME_MACHINE=alpha ;; + "EV5 (21164)") + UNAME_MACHINE=alphaev5 ;; + "EV5.6 (21164A)") + UNAME_MACHINE=alphaev56 ;; + "EV5.6 (21164PC)") + UNAME_MACHINE=alphapca56 ;; + "EV5.7 (21164PC)") + UNAME_MACHINE=alphapca57 ;; + "EV6 (21264)") + UNAME_MACHINE=alphaev6 ;; + "EV6.7 (21264A)") + UNAME_MACHINE=alphaev67 ;; + "EV6.8CB (21264C)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8AL (21264B)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8CX (21264D)") + UNAME_MACHINE=alphaev68 ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE=alphaev69 ;; + "EV7 (21364)") + UNAME_MACHINE=alphaev7 ;; + "EV7.9 (21364A)") + UNAME_MACHINE=alphaev79 ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm*:riscos:*:*|arm*:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH=i386 + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH=x86_64 + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/lslpp ] ; then + IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | + awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 + 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH=hppa2.0n ;; + 64) HP_ARCH=hppa2.0w ;; + '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = hppa2.0w ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH=hppa2.0w + else + HP_ARCH=hppa64 + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`/usr/bin/uname -p` + case ${UNAME_PROCESSOR} in + amd64) + UNAME_PROCESSOR=x86_64 ;; + i386) + UNAME_PROCESSOR=i586 ;; + esac + echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW64*:*) + echo ${UNAME_MACHINE}-pc-mingw64 + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + *:MSYS*:*) + echo ${UNAME_MACHINE}-pc-msys + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + aarch64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC=gnulibc1 ; fi + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + arc:Linux:*:* | arceb:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi + else + echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + cris:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-${LIBC} + exit ;; + crisv32:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-${LIBC} + exit ;; + e2k:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + frv:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + hexagon:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + i*86:Linux:*:*) + echo ${UNAME_MACHINE}-pc-linux-${LIBC} + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + k1om:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } + ;; + mips64el:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + openrisc*:Linux:*:*) + echo or1k-unknown-linux-${LIBC} + exit ;; + or32:Linux:*:* | or1k*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-${LIBC} + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-${LIBC} + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; + PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; + *) echo hppa-unknown-linux-${LIBC} ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-${LIBC} + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-${LIBC} + exit ;; + ppc64le:Linux:*:*) + echo powerpc64le-unknown-linux-${LIBC} + exit ;; + ppcle:Linux:*:*) + echo powerpcle-unknown-linux-${LIBC} + exit ;; + riscv32:Linux:*:* | riscv64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux-${LIBC} + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + tile*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-${LIBC} + exit ;; + x86_64:Linux:*:*) + echo ${UNAME_MACHINE}-pc-linux-${LIBC} + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configure will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + x86_64:Haiku:*:*) + echo x86_64-unknown-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + SX-ACE:SUPER-UX:*:*) + echo sxace-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + eval $set_cc_for_build + if test "$UNAME_PROCESSOR" = unknown ; then + UNAME_PROCESSOR=powerpc + fi + if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + case $UNAME_PROCESSOR in + i386) UNAME_PROCESSOR=x86_64 ;; + powerpc) UNAME_PROCESSOR=powerpc64 ;; + esac + fi + # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc + if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_PPC >/dev/null + then + UNAME_PROCESSOR=powerpc + fi + fi + elif test "$UNAME_PROCESSOR" = i386 ; then + # Avoid executing cc on OS X 10.9, as it ships with a stub + # that puts up a graphical alert prompting to install + # developer tools. Any system running Mac OS X 10.7 or + # later (Darwin 11 and later) is required to have a 64-bit + # processor. This is not true of the ARM version of Darwin + # that Apple uses in portable devices. + UNAME_PROCESSOR=x86_64 + fi + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = x86; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-*:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk${UNAME_RELEASE} + exit ;; + NSE-*:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-*:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + NSX-*:NONSTOP_KERNEL:*:*) + echo nsx-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = 386; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'` + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo ${UNAME_MACHINE}-unknown-esx + exit ;; + amd64:Isilon\ OneFS:*:*) + echo x86_64-unknown-onefs + exit ;; +esac + +cat >&2 </dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/config.h.in b/config.h.in new file mode 100644 index 0000000..e619ee3 --- /dev/null +++ b/config.h.in @@ -0,0 +1,91 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Defined if native language support should be enabled. */ +#undef ENABLE_NLS + +/* Define to the gettext package name. */ +#undef GETTEXT_PACKAGE + +/* Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the + CoreFoundation framework. */ +#undef HAVE_CFLOCALECOPYCURRENT + +/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in + the CoreFoundation framework. */ +#undef HAVE_CFPREFERENCESCOPYAPPVALUE + +/* Define if the GNU dcgettext() function is already present or preinstalled. + */ +#undef HAVE_DCGETTEXT + +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + +/* Define if the GNU gettext() function is already present or preinstalled. */ +#undef HAVE_GETTEXT + +/* Define if you have the iconv() function and it works. */ +#undef HAVE_ICONV + +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Define to the sub-directory where libtool stores uninstalled libraries. */ +#undef LT_OBJDIR + +/* Defined if os is Mac OSX */ +#undef OS_OSX + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Version number of package */ +#undef VERSION + +/* defines how to decorate public symbols while building */ +#undef _GTK_SOURCE_EXTERN diff --git a/config.h.win32 b/config.h.win32 new file mode 100644 index 0000000..35fb501 --- /dev/null +++ b/config.h.win32 @@ -0,0 +1,85 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Defined if native language support should be enabled. */ +#define ENABLE_NLS 1 + +/* Define to the gettext package name. */ +#define GETTEXT_PACKAGE "gtksourceview-3.0" + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_DLFCN_H */ + +/* Define to 1 if you have the header file. */ +#ifndef _MSC_VER +#define HAVE_INTTYPES_H 1 +#endif + +/* Define to 1 if you have the header file. */ +#define HAVE_MEMORY_H 1 + +/* Define to 1 if you have the header file. */ +#if (!defined(_MSC_VER) || (_MSC_VER >= 1600)) +#define HAVE_STDINT_H 1 +#endif + +/* Define to 1 if you have the header file. */ +#define HAVE_STDLIB_H 1 + +/* Define to 1 if you have the header file. */ +#ifndef _MSC_VER +#define HAVE_STRINGS_H 1 +#endif + +/* Define to 1 if you have the header file. */ +#define HAVE_STRING_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_STAT_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_TYPES_H 1 + +/* Define to 1 if you have the header file. */ +#ifndef _MSC_VER +#define HAVE_UNISTD_H 1 +#endif + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#define LT_OBJDIR ".libs/" + +/* Defined if os is Mac OSX */ +/* #undef OS_OSX */ + +/* Name of package */ +#define PACKAGE "gtksourceview" + +/* Define to the address where bug reports for this package should be sent. */ +#define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=gtksourceview" + +/* Define to the full name of this package. */ +#define PACKAGE_NAME "gtksourceview" + +/* Define to the full name and version of this package. */ +#define PACKAGE_STRING "gtksourceview 3.24.9" + +/* Define to the one symbol short name of this package. */ +#define PACKAGE_TARNAME "gtksourceview" + +/* Define to the home page for this package. */ +#define PACKAGE_URL "http://projects.gnome.org/gtksourceview/" + +/* Define to the version of this package. */ +#define PACKAGE_VERSION "3.24.9" + +/* Define to 1 if you have the ANSI C header files. */ +#define STDC_HEADERS 1 + +/* Version number of package */ +#define VERSION "3.24.9" + +#ifdef _MSC_VER +#define _GTK_SOURCE_EXTERN __declspec (dllexport) extern +#else +#define _GTK_SOURCE_EXTERN __attribute__((visibility("default"))) __declspec (dllexport) extern +#endif diff --git a/config.h.win32.in b/config.h.win32.in new file mode 100644 index 0000000..f39180f --- /dev/null +++ b/config.h.win32.in @@ -0,0 +1,85 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Defined if native language support should be enabled. */ +#define ENABLE_NLS 1 + +/* Define to the gettext package name. */ +#define GETTEXT_PACKAGE "@GETTEXT_PACKAGE@" + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_DLFCN_H */ + +/* Define to 1 if you have the header file. */ +#ifndef _MSC_VER +#define HAVE_INTTYPES_H 1 +#endif + +/* Define to 1 if you have the header file. */ +#define HAVE_MEMORY_H 1 + +/* Define to 1 if you have the header file. */ +#if (!defined(_MSC_VER) || (_MSC_VER >= 1600)) +#define HAVE_STDINT_H 1 +#endif + +/* Define to 1 if you have the header file. */ +#define HAVE_STDLIB_H 1 + +/* Define to 1 if you have the header file. */ +#ifndef _MSC_VER +#define HAVE_STRINGS_H 1 +#endif + +/* Define to 1 if you have the header file. */ +#define HAVE_STRING_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_STAT_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_TYPES_H 1 + +/* Define to 1 if you have the header file. */ +#ifndef _MSC_VER +#define HAVE_UNISTD_H 1 +#endif + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#define LT_OBJDIR ".libs/" + +/* Defined if os is Mac OSX */ +/* #undef OS_OSX */ + +/* Name of package */ +#define PACKAGE "gtksourceview" + +/* Define to the address where bug reports for this package should be sent. */ +#define PACKAGE_BUGREPORT "http://bugzilla.gnome.org/enter_bug.cgi?product=gtksourceview" + +/* Define to the full name of this package. */ +#define PACKAGE_NAME "gtksourceview" + +/* Define to the full name and version of this package. */ +#define PACKAGE_STRING "gtksourceview @PACKAGE_VERSION@" + +/* Define to the one symbol short name of this package. */ +#define PACKAGE_TARNAME "gtksourceview" + +/* Define to the home page for this package. */ +#define PACKAGE_URL "http://projects.gnome.org/gtksourceview/" + +/* Define to the version of this package. */ +#define PACKAGE_VERSION "@PACKAGE_VERSION@" + +/* Define to 1 if you have the ANSI C header files. */ +#define STDC_HEADERS 1 + +/* Version number of package */ +#define VERSION "@PACKAGE_VERSION@" + +#ifdef _MSC_VER +#define _GTK_SOURCE_EXTERN __declspec (dllexport) extern +#else +#define _GTK_SOURCE_EXTERN __attribute__((visibility("default"))) __declspec (dllexport) extern +#endif diff --git a/config.rpath b/config.rpath new file mode 100755 index 0000000..b625621 --- /dev/null +++ b/config.rpath @@ -0,0 +1,684 @@ +#! /bin/sh +# Output a system dependent set of variables, describing how to set the +# run time search path of shared libraries in an executable. +# +# Copyright 1996-2014 Free Software Foundation, Inc. +# Taken from GNU libtool, 2001 +# Originally by Gordon Matzigkeit , 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. +# +# The first argument passed to this file is the canonical host specification, +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld +# should be set by the caller. +# +# The set of defined variables is at the end of this script. + +# Known limitations: +# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer +# than 256 bytes, otherwise the compiler driver will dump core. The only +# known workaround is to choose shorter directory names for the build +# directory and/or the installation directory. + +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +shrext=.so + +host="$1" +host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + +# Code taken from libtool.m4's _LT_CC_BASENAME. + +for cc_temp in $CC""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` + +# Code taken from libtool.m4's _LT_COMPILER_PIC. + +wl= +if test "$GCC" = yes; then + wl='-Wl,' +else + case "$host_os" in + aix*) + wl='-Wl,' + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) + ;; + hpux9* | hpux10* | hpux11*) + wl='-Wl,' + ;; + irix5* | irix6* | nonstopux*) + wl='-Wl,' + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + ecc*) + wl='-Wl,' + ;; + icc* | ifort*) + wl='-Wl,' + ;; + lf95*) + wl='-Wl,' + ;; + nagfor*) + wl='-Wl,-Wl,,' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + wl='-Wl,' + ;; + ccc*) + wl='-Wl,' + ;; + xl* | bgxl* | bgf* | mpixl*) + wl='-Wl,' + ;; + como) + wl='-lopt=' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ F* | *Sun*Fortran*) + wl= + ;; + *Sun\ C*) + wl='-Wl,' + ;; + esac + ;; + esac + ;; + newsos6) + ;; + *nto* | *qnx*) + ;; + osf3* | osf4* | osf5*) + wl='-Wl,' + ;; + rdos*) + ;; + solaris*) + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + wl='-Qoption ld ' + ;; + *) + wl='-Wl,' + ;; + esac + ;; + sunos4*) + wl='-Qoption ld ' + ;; + sysv4 | sysv4.2uw2* | sysv4.3*) + wl='-Wl,' + ;; + sysv4*MP*) + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + wl='-Wl,' + ;; + unicos*) + wl='-Wl,' + ;; + uts4*) + ;; + esac +fi + +# Code taken from libtool.m4's _LT_LINKER_SHLIBS. + +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no + +case "$host_os" in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + # Unlike libtool, we use -rpath here, not --rpath, since the documented + # option of GNU ld is called -rpath, not --rpath. + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + case "$host_os" in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + fi + ;; + amigaos*) + case "$host_cpu" in + powerpc) + ;; + m68k) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + cygwin* | mingw* | pw32* | cegcc*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + haiku*) + ;; + interix[3-9]*) + hardcode_direct=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + netbsd*) + ;; + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + else + ld_shlibs=no + fi + ;; + esac + ;; + sunos4*) + hardcode_direct=yes + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + esac + if test "$ld_shlibs" = no; then + hardcode_libdir_flag_spec= + fi +else + case "$host_os" in + aix3*) + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + else + aix_use_runtimelinking=no + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + fi + hardcode_direct=yes + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + fi + # Begin _LT_AC_SYS_LIBPATH_AIX. + echo 'int main () { return 0; }' > conftest.c + ${CC} ${LDFLAGS} conftest.c -o conftest + aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + fi + if test -z "$aix_libpath"; then + aix_libpath="/usr/lib:/lib" + fi + rm -f conftest.c conftest + # End _LT_AC_SYS_LIBPATH_AIX. + if test "$aix_use_runtimelinking" = yes; then + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + else + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + fi + fi + ;; + amigaos*) + case "$host_cpu" in + powerpc) + ;; + m68k) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + bsdi[45]*) + ;; + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + libext=lib + ;; + darwin* | rhapsody*) + hardcode_direct=no + if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then + : + else + ld_shlibs=no + fi + ;; + dgux*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + freebsd2.[01]*) + hardcode_direct=yes + hardcode_minus_L=yes + ;; + freebsd* | dragonfly*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + hpux9*) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + hpux10*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + hpux11*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + ;; + *) + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + irix5* | irix6* | nonstopux*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + netbsd*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + newsos6) + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + *nto* | *qnx*) + ;; + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + else + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + osf3*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + osf4* | osf5*) + if test "$GCC" = yes; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + # Both cc and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + solaris*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + sunos4*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + ;; + sysv4) + case $host_vendor in + sni) + hardcode_direct=yes # is this really true??? + ;; + siemens) + hardcode_direct=no + ;; + motorola) + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + ;; + sysv4.3*) + ;; + sysv4*MP*) + if test -d /usr/nec; then + ld_shlibs=yes + fi + ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + ;; + sysv5* | sco3.2v5* | sco5v6*) + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator=':' + ;; + uts4*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + *) + ld_shlibs=no + ;; + esac +fi + +# Check dynamic linker characteristics +# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. +# Unlike libtool.m4, here we don't care about _all_ names of the library, but +# only about the one the linker finds when passed -lNAME. This is the last +# element of library_names_spec in libtool.m4, or possibly two of them if the +# linker has special search rules. +library_names_spec= # the last element of library_names_spec in libtool.m4 +libname_spec='lib$name' +case "$host_os" in + aix3*) + library_names_spec='$libname.a' + ;; + aix[4-9]*) + library_names_spec='$libname$shrext' + ;; + amigaos*) + case "$host_cpu" in + powerpc*) + library_names_spec='$libname$shrext' ;; + m68k) + library_names_spec='$libname.a' ;; + esac + ;; + beos*) + library_names_spec='$libname$shrext' + ;; + bsdi[45]*) + library_names_spec='$libname$shrext' + ;; + cygwin* | mingw* | pw32* | cegcc*) + shrext=.dll + library_names_spec='$libname.dll.a $libname.lib' + ;; + darwin* | rhapsody*) + shrext=.dylib + library_names_spec='$libname$shrext' + ;; + dgux*) + library_names_spec='$libname$shrext' + ;; + freebsd[23].*) + library_names_spec='$libname$shrext$versuffix' + ;; + freebsd* | dragonfly*) + library_names_spec='$libname$shrext' + ;; + gnu*) + library_names_spec='$libname$shrext' + ;; + haiku*) + library_names_spec='$libname$shrext' + ;; + hpux9* | hpux10* | hpux11*) + case $host_cpu in + ia64*) + shrext=.so + ;; + hppa*64*) + shrext=.sl + ;; + *) + shrext=.sl + ;; + esac + library_names_spec='$libname$shrext' + ;; + interix[3-9]*) + library_names_spec='$libname$shrext' + ;; + irix5* | irix6* | nonstopux*) + library_names_spec='$libname$shrext' + case "$host_os" in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; + *) libsuff= shlibsuff= ;; + esac + ;; + esac + ;; + linux*oldld* | linux*aout* | linux*coff*) + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + library_names_spec='$libname$shrext' + ;; + knetbsd*-gnu) + library_names_spec='$libname$shrext' + ;; + netbsd*) + library_names_spec='$libname$shrext' + ;; + newsos6) + library_names_spec='$libname$shrext' + ;; + *nto* | *qnx*) + library_names_spec='$libname$shrext' + ;; + openbsd*) + library_names_spec='$libname$shrext$versuffix' + ;; + os2*) + libname_spec='$name' + shrext=.dll + library_names_spec='$libname.a' + ;; + osf3* | osf4* | osf5*) + library_names_spec='$libname$shrext' + ;; + rdos*) + ;; + solaris*) + library_names_spec='$libname$shrext' + ;; + sunos4*) + library_names_spec='$libname$shrext$versuffix' + ;; + sysv4 | sysv4.3*) + library_names_spec='$libname$shrext' + ;; + sysv4*MP*) + library_names_spec='$libname$shrext' + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + library_names_spec='$libname$shrext' + ;; + tpf*) + library_names_spec='$libname$shrext' + ;; + uts4*) + library_names_spec='$libname$shrext' + ;; +esac + +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' +escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` +shlibext=`echo "$shrext" | sed -e 's,^\.,,'` +escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` + +LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). + + +# Please send patches to . +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright 1992-2017 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ + linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ + kopensolaris*-gnu* | cloudabi*-eabi* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + android-linux) + os=-linux-android + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze*) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*178) + os=-lynxos178 + ;; + -lynx*5) + os=-lynxos5 + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | aarch64 | aarch64_be \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arceb \ + | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ + | avr | avr32 \ + | ba \ + | be32 | be64 \ + | bfin \ + | c4x | c8051 | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | e2k | epiphany \ + | fido | fr30 | frv | ft32 \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | hexagon \ + | i370 | i860 | i960 | ia16 | ia64 \ + | ip2k | iq2000 \ + | k1om \ + | le32 | le64 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa32r6 | mipsisa32r6el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64r6 | mipsisa64r6el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipsr5900 | mipsr5900el \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nds32 | nds32le | nds32be \ + | nios | nios2 | nios2eb | nios2el \ + | ns16k | ns32k \ + | open8 | or1k | or1knd | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pru \ + | pyramid \ + | riscv32 | riscv64 \ + | rl78 | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | visium \ + | wasm32 \ + | we32k \ + | x86 | xc16x | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + c54x) + basic_machine=tic54x-unknown + ;; + c55x) + basic_machine=tic55x-unknown + ;; + c6x) + basic_machine=tic6x-unknown + ;; + leon|leon[3-9]) + basic_machine=sparc-$basic_machine + ;; + m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip) + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + xgate) + basic_machine=$basic_machine-unknown + os=-none + ;; + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | aarch64-* | aarch64_be-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | ba-* \ + | be32-* | be64-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* \ + | c8051-* | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | e2k-* | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | hexagon-* \ + | i*86-* | i860-* | i960-* | ia16-* | ia64-* \ + | ip2k-* | iq2000-* \ + | k1om-* \ + | le32-* | le64-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ + | microblaze-* | microblazeel-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa32r6-* | mipsisa32r6el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64r6-* | mipsisa64r6el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipsr5900-* | mipsr5900el-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nds32-* | nds32le-* | nds32be-* \ + | nios-* | nios2-* | nios2eb-* | nios2el-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ + | or1k*-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pru-* \ + | pyramid-* \ + | riscv32-* | riscv64-* \ + | rl78-* | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ + | tahoe-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile*-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ + | vax-* \ + | visium-* \ + | wasm32-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + asmjs) + basic_machine=asmjs-unknown + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c54x-*) + basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c55x-*) + basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c6x-*) + basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16 | cr16-*) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + e500v[12]) + basic_machine=powerpc-unknown + os=$os"spe" + ;; + e500v[12]-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + os=$os"spe" + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + leon-*|leon[3-9]-*) + basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'` + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze*) + basic_machine=microblaze-xilinx + ;; + mingw64) + basic_machine=x86_64-pc + os=-mingw64 + ;; + mingw32) + basic_machine=i686-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + moxiebox) + basic_machine=moxie-unknown + os=-moxiebox + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + msys) + basic_machine=i686-pc + os=-msys + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + nacl) + basic_machine=le32-unknown + os=-nacl + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + neo-tandem) + basic_machine=neo-tandem + ;; + nse-tandem) + basic_machine=nse-tandem + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + nsx-tandem) + basic_machine=nsx-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc | ppcbe) basic_machine=powerpc-unknown + ;; + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-* | ppc64p7-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos | rdos64) + basic_machine=x86_64-pc + os=-rdos + ;; + rdos32) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tile*) + basic_machine=$basic_machine-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + wasm32) + basic_machine=wasm32-unknown + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* | -plan9* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* | -cloudabi* | -sortix* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \ + | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ + | -linux-newlib* | -linux-musl* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \ + | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -nacl*) + ;; + -ios) + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + c8051-*) + os=-elf + ;; + hexagon-*) + os=-elf + ;; + tic54x-*) + os=-coff + ;; + tic55x-*) + os=-coff + ;; + tic6x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + pru-*) + os=-elf + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/configure b/configure new file mode 100755 index 0000000..8289964 --- /dev/null +++ b/configure @@ -0,0 +1,20930 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for gtksourceview 3.24.9. +# +# Report bugs to . +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: http://bugzilla.gnome.org/enter_bug.cgi?product=gtksourceview +$0: about your system, including any error possibly output +$0: before this message. Then install a modern shell, or +$0: manually run the script under such a shell if you do +$0: have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + +SHELL=${CONFIG_SHELL-/bin/sh} + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='gtksourceview' +PACKAGE_TARNAME='gtksourceview' +PACKAGE_VERSION='3.24.9' +PACKAGE_STRING='gtksourceview 3.24.9' +PACKAGE_BUGREPORT='http://bugzilla.gnome.org/enter_bug.cgi?product=gtksourceview' +PACKAGE_URL='https://wiki.gnome.org/Projects/GtkSourceView' + +ac_unique_file="gtksourceview/gtksourcebuffer.h" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +gt_needs= +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +MSVC_NO_TOOLSET_SET_FALSE +MSVC_NO_TOOLSET_SET_TRUE +MSVC_BASE_NO_TOOLSET_SET_FALSE +MSVC_BASE_NO_TOOLSET_SET_TRUE +ABS_TOP_SRCDIR +ENABLE_VAPIGEN_FALSE +ENABLE_VAPIGEN_TRUE +VAPIGEN_MAKEFILE +VAPIGEN_VAPIDIR +VAPIGEN +VALGRIND_CHECK_RULES +valgrind_enabled_tools +valgrind_tools +ENABLE_VALGRIND_sgcheck +ENABLE_VALGRIND_drd +ENABLE_VALGRIND_helgrind +ENABLE_VALGRIND_memcheck +VALGRIND_ENABLED +VALGRIND_ENABLED_FALSE +VALGRIND_ENABLED_TRUE +VALGRIND +CODE_COVERAGE_RULES +CODE_COVERAGE_LDFLAGS +CODE_COVERAGE_LIBS +CODE_COVERAGE_CXXFLAGS +CODE_COVERAGE_CFLAGS +CODE_COVERAGE_CPPFLAGS +GENHTML +LCOV +GCOV +CODE_COVERAGE_ENABLED +CODE_COVERAGE_ENABLED_FALSE +CODE_COVERAGE_ENABLED_TRUE +HAVE_INTROSPECTION_FALSE +HAVE_INTROSPECTION_TRUE +INTROSPECTION_MAKEFILE +INTROSPECTION_LIBS +INTROSPECTION_CFLAGS +INTROSPECTION_TYPELIBDIR +INTROSPECTION_GIRDIR +INTROSPECTION_GENERATE +INTROSPECTION_COMPILER +INTROSPECTION_SCANNER +INSTALLED_TESTS_FALSE +INSTALLED_TESTS_TRUE +GTK_DOC_USE_REBASE_FALSE +GTK_DOC_USE_REBASE_TRUE +GTK_DOC_USE_LIBTOOL_FALSE +GTK_DOC_USE_LIBTOOL_TRUE +GTK_DOC_BUILD_PDF_FALSE +GTK_DOC_BUILD_PDF_TRUE +GTK_DOC_BUILD_HTML_FALSE +GTK_DOC_BUILD_HTML_TRUE +ENABLE_GTK_DOC_FALSE +ENABLE_GTK_DOC_TRUE +HAVE_GTK_DOC_FALSE +HAVE_GTK_DOC_TRUE +GTKDOC_DEPS_LIBS +GTKDOC_DEPS_CFLAGS +HTML_DIR +GTKDOC_MKPDF +GTKDOC_REBASE +GTKDOC_CHECK_PATH +GTKDOC_CHECK +GETTEXT_PACKAGE +POSUB +LTLIBINTL +LIBINTL +INTLLIBS +LTLIBICONV +LIBICONV +INTL_MACOSX_LIBS +XGETTEXT_EXTRA_OPTIONS +MSGMERGE +XGETTEXT_015 +XGETTEXT +GMSGFMT_015 +MSGFMT_015 +GMSGFMT +MSGFMT +GETTEXT_MACRO_VERSION +USE_NLS +GLADE_CATALOG_DIR +GLADE_LIBS +GLADE_CFLAGS +GLADE_CATALOG_FALSE +GLADE_CATALOG_TRUE +OS_OSX_FALSE +OS_OSX_TRUE +AX_PACKAGE_REQUIRES_PRIVATE +AX_PACKAGE_REQUIRES +DEP_LIBS +DEP_CFLAGS +HIDDEN_VISIBILITY_CFLAGS +DISABLE_DEPRECATED_CFLAGS +WARN_SCANNERFLAGS +WARN_LDFLAGS +WARN_CFLAGS +ITSTOOL +GLIB_COMPILE_RESOURCES +GLIB_MKENUMS +CPP +LT_SYS_LIBRARY_PATH +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +RANLIB +ac_ct_AR +AR +DLLTOOL +OBJDUMP +LN_S +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +EGREP +GREP +SED +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +LIBTOOL +pkgconfigdir +PKG_CONFIG_LIBDIR +PKG_CONFIG_PATH +PKG_CONFIG +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +GSV_MAJOR_API_VERSION +GSV_API_VERSION +GSV_LT_VERSION +GTK_SOURCE_MICRO_VERSION +GTK_SOURCE_MINOR_VERSION +GTK_SOURCE_MAJOR_VERSION +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_maintainer_mode +enable_dependency_tracking +with_pkgconfigdir +enable_static +enable_shared +with_pic +enable_fast_install +with_aix_soname +with_gnu_ld +with_sysroot +enable_libtool_lock +enable_compile_warnings +enable_Werror +enable_deprecations +enable_glade_catalog +enable_nls +enable_rpath +with_libiconv_prefix +with_libintl_prefix +with_html_dir +enable_gtk_doc +enable_gtk_doc_html +enable_gtk_doc_pdf +enable_installed_tests +enable_introspection +with_gcov +enable_code_coverage +enable_valgrind +enable_valgrind_memcheck +enable_valgrind_helgrind +enable_valgrind_drd +enable_valgrind_sgcheck +enable_vala +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +PKG_CONFIG +PKG_CONFIG_PATH +PKG_CONFIG_LIBDIR +LT_SYS_LIBRARY_PATH +CPP +DEP_CFLAGS +DEP_LIBS +GLADE_CFLAGS +GLADE_LIBS +GTKDOC_DEPS_CFLAGS +GTKDOC_DEPS_LIBS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures gtksourceview 3.24.9 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/gtksourceview] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of gtksourceview 3.24.9:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --disable-maintainer-mode + disable make rules and dependencies not useful (and + sometimes confusing) to the casual installer + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + --enable-static[=PKGS] build static libraries [default=no] + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --enable-compile-warnings=[no/yes/error] + Enable compiler warnings and errors + --disable-Werror Unconditionally make all compiler warnings non-fatal + --disable-deprecations remove deprecated symbols from the header files + --enable-glade-catalog Install a glade catalog file [default=no] + --disable-nls do not use Native Language Support + --disable-rpath do not hardcode runtime library paths + --enable-gtk-doc use gtk-doc to build documentation [[default=no]] + --enable-gtk-doc-html build documentation in html format [[default=yes]] + --enable-gtk-doc-pdf build documentation in pdf format [[default=no]] + --enable-installed-tests + Install test programs (default: no) + --enable-introspection=[no/auto/yes] + Enable introspection for this build + --enable-code-coverage Whether to enable code coverage support + --enable-valgrind Whether to enable Valgrind on the unit tests + --disable-valgrind-memcheck + Whether to skip memcheck during the Valgrind tests + --disable-valgrind-helgrind + Whether to skip helgrind during the Valgrind tests + --disable-valgrind-drd Whether to skip drd during the Valgrind tests + --disable-valgrind-sgcheck + Whether to skip sgcheck during the Valgrind tests + --enable-vala=[no/auto/yes] + build Vala bindings [default=auto] + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-pkgconfigdir pkg-config installation directory + ['${libdir}/pkgconfig'] + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use + both] + --with-aix-soname=aix|svr4|both + shared library versioning (aka "SONAME") variant to + provide on AIX, [default=aix]. + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-sysroot[=DIR] Search for dependent libraries within DIR (or the + compiler's sysroot if not specified). + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib + --without-libiconv-prefix don't search for libiconv in includedir and libdir + --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib + --without-libintl-prefix don't search for libintl in includedir and libdir + --with-html-dir=PATH path to installed docs + --with-gcov=GCOV use given GCOV for coverage (GCOV=gcov). + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + PKG_CONFIG path to pkg-config utility + PKG_CONFIG_PATH + directories to add to pkg-config's search path + PKG_CONFIG_LIBDIR + path overriding pkg-config's built-in search path + LT_SYS_LIBRARY_PATH + User-defined run-time library search path. + CPP C preprocessor + DEP_CFLAGS C compiler flags for DEP, overriding pkg-config + DEP_LIBS linker flags for DEP, overriding pkg-config + GLADE_CFLAGS + C compiler flags for GLADE, overriding pkg-config + GLADE_LIBS linker flags for GLADE, overriding pkg-config + GTKDOC_DEPS_CFLAGS + C compiler flags for GTKDOC_DEPS, overriding pkg-config + GTKDOC_DEPS_LIBS + linker flags for GTKDOC_DEPS, overriding pkg-config + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +gtksourceview home page: . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +gtksourceview configure 3.24.9 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} +( $as_echo "## ---------------------------------------------------------------------------- ## +## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gtksourceview ## +## ---------------------------------------------------------------------------- ##" + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by gtksourceview $as_me 3.24.9, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +gt_needs="$gt_needs " +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + # $is_release = (.git directory does not exist) + if test -d ${srcdir}/.git; then : + ax_is_release=no +else + ax_is_release=yes +fi + + + +GTK_SOURCE_MAJOR_VERSION=3 +GTK_SOURCE_MINOR_VERSION=24 +GTK_SOURCE_MICRO_VERSION=9 + + + + +# Libtool versioning +# +# For development releases (if the minor package version is odd), keep the same +# Libtool version. +# +# For a new minor stable release (when incrementing the minor package version +# to an even number), apply the following algorithm step by step: +# 1. If the library source code has changed at all since the last +# update, then increment REVISION. +# 2. If any exported functions or data have been added, removed, or +# changed since the last update, increment CURRENT and set REVISION +# to 0. +# 3. If any exported functions or data have been added since the last +# public release, increment AGE. +# 4. If any exported functions or data have been removed since the last +# public release, set AGE to 0. +# +# When incrementing the API version (usually for a new major package version), +# set CURRENT, REVISION and AGE to 0 since it's like a new library. + +GSV_LT_CURRENT=9 +GSV_LT_REVISION=0 +GSV_LT_AGE=8 +GSV_LT_VERSION="$GSV_LT_CURRENT:$GSV_LT_REVISION:$GSV_LT_AGE" + + +# API version, used for parallel installability. +# Not used in: +# - po/Makevars +# - the docs/reference/gtksourceview-3.0-sections.txt filename +# - the gtksourceview/ directory and sub-directories, because make variables +# need to be transformed (3.0 -> 3_0), and it doesn't work if two different +# variables are used (it must be the same variable). With GSV_API_VERSION +# defined to a single digit (4 instead of 4.0), then it would work. +# Because as far as I've tested, it is not easily feasible to not hardcode the +# API version in those places (swilmet). +GSV_API_VERSION=3.0 +GSV_MAJOR_API_VERSION=3 + + + +# Dependencies +glib_req=2.48 +gtk_req=3.20 +libxml_req=2.6 +gladeui_req=3.9 + + +ac_config_headers="$ac_config_headers config.h" + + + +# gnu strictness to generate the INSTALL file +am__api_version='1.15' + +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='gtksourceview' + VERSION='3.24.9' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar plaintar pax cpio none' + +# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether UID '$am_uid' is supported by ustar format" >&5 +$as_echo_n "checking whether UID '$am_uid' is supported by ustar format... " >&6; } + if test $am_uid -le $am_max_uid; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + _am_tools=none + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether GID '$am_gid' is supported by ustar format" >&5 +$as_echo_n "checking whether GID '$am_gid' is supported by ustar format... " >&6; } + if test $am_gid -le $am_max_gid; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + _am_tools=none + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a ustar tar archive" >&5 +$as_echo_n "checking how to create a ustar tar archive... " >&6; } + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_ustar-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + { echo "$as_me:$LINENO: $_am_tar --version" >&5 + ($_am_tar --version) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && break + done + am__tar="$_am_tar --format=ustar -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=ustar -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x ustar -w "$$tardir"' + am__tar_='pax -L -x ustar -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H ustar -L' + am__tar_='find "$tardir" -print | cpio -o -H ustar -L' + am__untar='cpio -i -H ustar -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_ustar}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + { echo "$as_me:$LINENO: tardir=conftest.dir && eval $am__tar_ >conftest.tar" >&5 + (tardir=conftest.dir && eval $am__tar_ >conftest.tar) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + rm -rf conftest.dir + if test -s conftest.tar; then + { echo "$as_me:$LINENO: $am__untar &5 + ($am__untar &5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { echo "$as_me:$LINENO: cat conftest.dir/file" >&5 + (cat conftest.dir/file) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + grep GrepMe conftest.dir/file >/dev/null 2>&1 && break + fi + done + rm -rf conftest.dir + + if ${am_cv_prog_tar_ustar+:} false; then : + $as_echo_n "(cached) " >&6 +else + am_cv_prog_tar_ustar=$_am_tool +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_ustar" >&5 +$as_echo "$am_cv_prog_tar_ustar" >&6; } + + + + + + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then : + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=yes +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=0;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + + +# Check for programs +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + + + + + + + + + + + + + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. +set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +PKG_CONFIG=$ac_cv_path_PKG_CONFIG +if test -n "$PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 +$as_echo "$PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_PKG_CONFIG"; then + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +if test -n "$ac_pt_PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 +$as_echo "$ac_pt_PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_PKG_CONFIG" = x; then + PKG_CONFIG="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + PKG_CONFIG=$ac_pt_PKG_CONFIG + fi +else + PKG_CONFIG="$ac_cv_path_PKG_CONFIG" +fi + +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.9.0 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 +$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + PKG_CONFIG="" + fi +fi + + + +# Check whether --with-pkgconfigdir was given. +if test "${with_pkgconfigdir+set}" = set; then : + withval=$with_pkgconfigdir; +else + with_pkgconfigdir='${libdir}/pkgconfig' +fi + +pkgconfigdir=$with_pkgconfigdir + + + + + +# Initialize libtool + +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.4.6' +macro_revision='2.4.6' + + + + + + + + + + + + + +ltmain=$ac_aux_dir/ltmain.sh + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case $ECHO in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_FGREP" || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test yes = "$GCC"; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return, which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD=$ac_prog + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test yes = "$with_gnu_ld"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD=$ac_dir/$ac_prog + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM=$NM +else + lt_nm_to_check=${ac_tool_prefix}nm + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break 2 + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break 2 + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS=$lt_save_ifs + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols -headers" + ;; + *) + DUMPBIN=: + ;; + esac + fi + + if test : != "$DUMPBIN"; then + NM=$DUMPBIN + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring=ABCD + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len" && \ + test undefined != "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test 17 != "$i" # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n "$lt_cv_sys_max_cmd_len"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +$as_echo_n "checking how to convert $build file names to $host format... " >&6; } +if ${lt_cv_to_host_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac + +fi + +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +$as_echo "$lt_cv_to_host_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } +if ${lt_cv_to_tool_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac + +fi + +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +$as_echo "$lt_cv_to_tool_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test yes != "$GCC"; then + reload_cmds=false + fi + ;; + darwin*) + if test yes = "$GCC"; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if ${lt_cv_deplibs_check_method+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# 'unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd* | bitrig*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +$as_echo_n "checking how to associate runtime and link libraries... " >&6; } +if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd=$ECHO + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + + + + + + + + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} +: ${AR_FLAGS=cru} + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +$as_echo_n "checking for archiver @FILE support... " >&6; } +if ${lt_cv_ar_at_file+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test 0 -eq "$ac_status"; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test 0 -ne "$ac_status"; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +$as_echo "$lt_cv_ar_at_file" >&6; } + +if test no = "$lt_cv_ar_at_file"; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + bitrig* | openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if ${lt_cv_sys_global_symbol_pipe+:} false; then : + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test ia64 = "$host_cpu"; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined __osf__ +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS=conftstm.$ac_objext + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest$ac_exeext; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test yes = "$pipe_works"; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +$as_echo_n "checking for sysroot... " >&6; } + +# Check whether --with-sysroot was given. +if test "${with_sysroot+set}" = set; then : + withval=$with_sysroot; +else + with_sysroot=no +fi + + +lt_sysroot= +case $with_sysroot in #( + yes) + if test yes = "$GCC"; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 +$as_echo "$with_sysroot" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +$as_echo "${lt_sysroot:-no}" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 +$as_echo_n "checking for a working dd... " >&6; } +if ${ac_cv_path_lt_DD+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +if test -z "$lt_DD"; then + ac_path_lt_DD_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in dd; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_lt_DD" || continue +if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi + $ac_path_lt_DD_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_lt_DD"; then + : + fi +else + ac_cv_path_lt_DD=$lt_DD +fi + +rm -f conftest.i conftest2.i conftest.out +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 +$as_echo "$ac_cv_path_lt_DD" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 +$as_echo_n "checking how to truncate binary pipes... " >&6; } +if ${lt_cv_truncate_bin+:} false; then : + $as_echo_n "(cached) " >&6 +else + printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 +$as_echo "$lt_cv_truncate_bin" >&6; } + + + + + + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test no = "$enable_libtool_lock" || enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE=32 + ;; + *ELF-64*) + HPUX_IA64_MODE=64 + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test yes = "$lt_cv_prog_gnu_ld"; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + emul=elf + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `/usr/bin/file conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + case `/usr/bin/file conftest.o` in + *x86-64*) + LD="${LD-ld} -m elf32_x86_64" + ;; + *) + LD="${LD-ld} -m elf_i386" + ;; + esac + ;; + powerpc64le-*linux*) + LD="${LD-ld} -m elf32lppclinux" + ;; + powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + powerpcle-*linux*) + LD="${LD-ld} -m elf64lppc" + ;; + powerpc-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS=$CFLAGS + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test yes != "$lt_cv_cc_needs_belf"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS=$SAVE_CFLAGS + fi + ;; +*-*solaris*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*|x86_64-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD=${LD-ld}_sol2 + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks=$enable_libtool_lock + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +$as_echo "$MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + fi +else + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" +fi + +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if ${lt_cv_path_mainfest_tool+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +$as_echo "$lt_cv_path_mainfest_tool" >&6; } +if test yes != "$lt_cv_path_mainfest_tool"; then + MANIFEST_TOOL=: +fi + + + + + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if ${lt_cv_apple_cc_single_mod+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "$LT_MULTI_MODULE"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if ${lt_cv_ld_exported_symbols_list+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes +else + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if ${lt_cv_ld_force_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[012][,.]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test yes = "$lt_cv_apple_cc_single_mod"; then + _lt_dar_single_mod='$single_module' + fi + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' + fi + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi + +done + + + + + +# Set options +# Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_static=no +fi + + + + + + + + + + + enable_dlopen=no + + + enable_win32_dll=no + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for lt_pkg in $withval; do + IFS=$lt_save_ifs + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + pic_mode=default +fi + + + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[5-9]*,yes) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 +$as_echo_n "checking which variant of shared library versioning to provide... " >&6; } + +# Check whether --with-aix-soname was given. +if test "${with_aix_soname+set}" = set; then : + withval=$with_aix_soname; case $withval in + aix|svr4|both) + ;; + *) + as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname +else + if ${lt_cv_with_aix_soname+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_with_aix_soname=aix +fi + + with_aix_soname=$lt_cv_with_aix_soname +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 +$as_echo "$with_aix_soname" >&6; } + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS=$ltmain + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld=$lt_cv_prog_gnu_ld + +old_CC=$CC +old_CFLAGS=$CFLAGS + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +func_cc_basename $compiler +cc_basename=$func_cc_basename_result + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/${ac_tool_prefix}file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac +fi + +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac +fi + +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC=$CC +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test yes = "$GCC"; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + + + if test yes = "$GCC"; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + lt_prog_compiler_pic='-fPIC' + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='$wl-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + case $cc_basename in + # old Intel for x86_64, which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms that do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +$as_echo "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if ${lt_cv_prog_compiler_pic_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_pic_works"; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_static_works"; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links=nottested +if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test no = "$hard_links"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test yes != "$GCC"; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd* | bitrig*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test yes = "$with_gnu_ld"; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test yes = "$lt_use_gnu_ld_interface"; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='$wl' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + export_dynamic_flag_spec='$wl--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test ia64 != "$host_cpu"; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='$wl--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test linux-dietlibc = "$host_os"; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test no = "$tmp_diet" + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + + if test yes = "$supports_anon_versioning"; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + tcc*) + export_dynamic_flag_spec='-rdynamic' + ;; + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test yes = "$supports_anon_versioning"; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test no = "$ld_shlibs"; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test ia64 = "$host_cpu"; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag= + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then + aix_use_runtimelinking=yes + break + fi + done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + hardcode_direct=no + hardcode_direct_absolute=no + ;; + esac + + if test yes = "$GCC"; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`$CC -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' + fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' + else + # not using gcc + if test ia64 = "$host_cpu"; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' + else + shared_flag='$wl-bM:SRE' + fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' + fi + fi + + export_dynamic_flag_spec='$wl-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=/usr/lib:/lib + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag + else + if test ia64 = "$host_cpu"; then + hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=/usr/lib:/lib + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' $wl-bernotok' + allow_undefined_flag=' $wl-berok' + if test yes = "$with_gnu_ld"; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test yes = "$lt_cv_ld_force_load"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag=$_lt_dar_allow_undefined + case $cc_basename in + ifort*|nagfor*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test yes = "$_lt_dar_can_shared"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test yes = "$GCC"; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='$wl-E' + ;; + + hpux10*) + if test yes,no = "$GCC,$with_gnu_ld"; then + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='$wl-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test yes,no = "$GCC,$with_gnu_ld"; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if ${lt_cv_prog_compiler__b+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } + +if test yes = "$lt_cv_prog_compiler__b"; then + archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi + + ;; + esac + fi + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='$wl-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test yes = "$GCC"; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : + $as_echo_n "(cached) " >&6 +else + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test yes = "$lt_cv_irix_exported_symbol"; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' + fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + ld_shlibs=yes + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd* | bitrig*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' + else + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + ;; + + osf3*) + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test yes = "$GCC"; then + wlarc='$wl' + archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='$wl' + archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands '-z linker_flag'. GCC discards it without '$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test yes = "$GCC"; then + whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test sequent = "$host_vendor"; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='$wl-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We CANNOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='$wl-z,text' + allow_undefined_flag='$wl-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='$wl-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='$wl-Bexport' + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test sni = "$host_vendor"; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='$wl-Blargedynsym' + ;; + esac + fi + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test no = "$ld_shlibs" && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test yes,yes = "$GCC,$enable_shared"; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test yes = "$GCC"; then + case $host_os in + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary... + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo = "/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's|/\([A-Za-z]:\)|\1|g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=.so +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + + + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='$libname$release$shared_ext$major' + ;; + +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test ia64 = "$host_cpu"; then + # AIX 5 supports IA64 + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a(lib.so.V)' + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='$libname$shared_ext' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec=$LIB + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=no + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 + fi + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test yes = "$lt_cv_prog_gnu_ld"; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # Don't embed -rpath directories since the linker doesn't support them. + hardcode_libdir_flag_spec='-L$libdir' + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Add ABI-specific directories to the system library path. + sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" + + # Ideally, we could use ldconfig to report *all* directores which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd* | bitrig*) + version_type=sunos + sys_lib_dlsearch_path_spec=/usr/lib + need_lib_prefix=no + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no + else + need_version=yes + fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +os2*) + libname_spec='$name' + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test yes = "$with_gnu_ld"; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec; then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=sco + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test yes = "$with_gnu_ld"; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test no = "$dynamic_linker" && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test yes = "$GCC"; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec +fi + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec +fi + +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test yes = "$hardcode_automatic"; then + + # We can hardcode non-existent directories. + if test no != "$hardcode_direct" && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && + test no != "$hardcode_minus_L"; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test relink = "$hardcode_action" || + test yes = "$inherit_rpath"; then + # Fast installation is not supported + enable_fast_install=no +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test yes != "$enable_dlopen"; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen=load_add_on + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen=LoadLibrary + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl +else + + lt_cv_dlopen=dyld + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : + lt_cv_dlopen=shl_load +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + lt_cv_dlopen=dlopen +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if ${ac_cv_lib_svld_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if ${ac_cv_lib_dld_dld_link+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : + lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test no = "$lt_cv_dlopen"; then + enable_dlopen=no + else + enable_dlopen=yes + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS=$LDFLAGS + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS=$LIBS + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test yes = "$cross_compiling"; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test yes = "$lt_cv_dlopen_self"; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self_static+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test yes = "$cross_compiling"; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP"; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report what library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC=$lt_save_CC + + + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + + +# Check for header files +for ac_header in unistd.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "unistd.h" "ac_cv_header_unistd_h" "$ac_includes_default" +if test "x$ac_cv_header_unistd_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_UNISTD_H 1 +_ACEOF + +fi + +done + + +# Pull glib-mkenums & co. +# Extract the first word of "glib-mkenums", so it can be a program name with args. +set dummy glib-mkenums; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_GLIB_MKENUMS+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $GLIB_MKENUMS in + [\\/]* | ?:[\\/]*) + ac_cv_path_GLIB_MKENUMS="$GLIB_MKENUMS" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_GLIB_MKENUMS="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +GLIB_MKENUMS=$ac_cv_path_GLIB_MKENUMS +if test -n "$GLIB_MKENUMS"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_MKENUMS" >&5 +$as_echo "$GLIB_MKENUMS" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +# Extract the first word of "glib-compile-resources", so it can be a program name with args. +set dummy glib-compile-resources; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_GLIB_COMPILE_RESOURCES+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $GLIB_COMPILE_RESOURCES in + [\\/]* | ?:[\\/]*) + ac_cv_path_GLIB_COMPILE_RESOURCES="$GLIB_COMPILE_RESOURCES" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_GLIB_COMPILE_RESOURCES="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +GLIB_COMPILE_RESOURCES=$ac_cv_path_GLIB_COMPILE_RESOURCES +if test -n "$GLIB_COMPILE_RESOURCES"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_COMPILE_RESOURCES" >&5 +$as_echo "$GLIB_COMPILE_RESOURCES" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +# Extract the first word of "itstool", so it can be a program name with args. +set dummy itstool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ITSTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ITSTOOL in + [\\/]* | ?:[\\/]*) + ac_cv_path_ITSTOOL="$ITSTOOL" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_ITSTOOL="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ITSTOOL=$ac_cv_path_ITSTOOL +if test -n "$ITSTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ITSTOOL" >&5 +$as_echo "$ITSTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + +# Compile warnings + + + + # C support is enabled by default. + + + # Only enable C++ support if AC_PROG_CXX is called. The redefinition of + # AC_PROG_CXX is so that a fatal error is emitted if this macro is called + # before AC_PROG_CXX, which would otherwise cause no C++ warnings to be + # checked. + + + + + # Default value for IS-RELEASE is $ax_is_release + ax_compiler_flags_is_release=$ax_is_release + + # Check whether --enable-compile-warnings was given. +if test "${enable_compile_warnings+set}" = set; then : + enableval=$enable_compile_warnings; +else + if test "$ax_compiler_flags_is_release" = "yes"; then : + enable_compile_warnings="yes" +else + enable_compile_warnings="error" +fi +fi + + # Check whether --enable-Werror was given. +if test "${enable_Werror+set}" = set; then : + enableval=$enable_Werror; +else + enable_Werror=maybe +fi + + + # Return the user's chosen warning level + if test "$enable_Werror" = "no" -a \ + "$enable_compile_warnings" = "error"; then : + + enable_compile_warnings="yes" + +fi + + ax_enable_compile_warnings=$enable_compile_warnings + + + + + + + + + + + # Variable names + + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #ifndef __cplusplus + #error "no C++" + #endif +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ax_compiler_cxx=yes; +else + ax_compiler_cxx=no; +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + # Always pass -Werror=unknown-warning-option to get Clang to fail on bad + # flags, otherwise they are always appended to the warn_cflags variable, and + # Clang warns on them for every compilation unit. + # If this is passed to GCC, it will explode, so the flag must be enabled + # conditionally. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts -Werror=unknown-warning-option" >&5 +$as_echo_n "checking whether C compiler accepts -Werror=unknown-warning-option... " >&6; } +if ${ax_cv_check_cflags___Werror_unknown_warning_option+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$CFLAGS + CFLAGS="$CFLAGS -Werror=unknown-warning-option" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ax_cv_check_cflags___Werror_unknown_warning_option=yes +else + ax_cv_check_cflags___Werror_unknown_warning_option=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS=$ax_check_save_flags +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_cflags___Werror_unknown_warning_option" >&5 +$as_echo "$ax_cv_check_cflags___Werror_unknown_warning_option" >&6; } +if test "x$ax_cv_check_cflags___Werror_unknown_warning_option" = xyes; then : + + ax_compiler_flags_test="-Werror=unknown-warning-option" + +else + + ax_compiler_flags_test="" + +fi + + + # Check that -Wno-suggest-attribute=format is supported + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts -Wno-suggest-attribute=format" >&5 +$as_echo_n "checking whether C compiler accepts -Wno-suggest-attribute=format... " >&6; } +if ${ax_cv_check_cflags___Wno_suggest_attribute_format+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$CFLAGS + CFLAGS="$CFLAGS -Wno-suggest-attribute=format" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ax_cv_check_cflags___Wno_suggest_attribute_format=yes +else + ax_cv_check_cflags___Wno_suggest_attribute_format=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS=$ax_check_save_flags +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_cflags___Wno_suggest_attribute_format" >&5 +$as_echo "$ax_cv_check_cflags___Wno_suggest_attribute_format" >&6; } +if test "x$ax_cv_check_cflags___Wno_suggest_attribute_format" = xyes; then : + + ax_compiler_no_suggest_attribute_flags="-Wno-suggest-attribute=format" + +else + + ax_compiler_no_suggest_attribute_flags="" + +fi + + + # Base flags + + + + +for flag in -fno-strict-aliasing ; do + as_CACHEVAR=`$as_echo "ax_cv_check_cflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts $flag" >&5 +$as_echo_n "checking whether C compiler accepts $flag... " >&6; } +if eval \${$as_CACHEVAR+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$CFLAGS + CFLAGS="$CFLAGS $ax_compiler_flags_test $flag" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$as_CACHEVAR=yes" +else + eval "$as_CACHEVAR=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS=$ax_check_save_flags +fi +eval ac_res=\$$as_CACHEVAR + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : + +if ${WARN_CFLAGS+:} false; then : + + case " $WARN_CFLAGS " in #( + *" $flag "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS already contains \$flag"; } >&5 + (: WARN_CFLAGS already contains $flag) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append WARN_CFLAGS " $flag" + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 + (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + WARN_CFLAGS=$flag + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 + (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + +else + : +fi + +done + + + if test "$ax_enable_compile_warnings" != "no"; then : + + # "yes" flags + + + + +for flag in -Wall -Wextra -Wundef -Wwrite-strings -Wpointer-arith -Wmissing-declarations -Wredundant-decls -Wno-unused-parameter -Wno-missing-field-initializers -Wformat=2 -Wcast-align -Wformat-nonliteral -Wformat-security -Wsign-compare -Wstrict-aliasing -Wshadow -Winline -Wpacked -Wmissing-format-attribute -Wmissing-noreturn -Winit-self -Wredundant-decls -Wmissing-include-dirs -Wunused-but-set-variable -Warray-bounds -Wreturn-type -Wswitch-enum -Wswitch-default -Wduplicated-cond -Wduplicated-branches -Wlogical-op -Wrestrict -Wnull-dereference -Wdouble-promotion ; do + as_CACHEVAR=`$as_echo "ax_cv_check_cflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts $flag" >&5 +$as_echo_n "checking whether C compiler accepts $flag... " >&6; } +if eval \${$as_CACHEVAR+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$CFLAGS + CFLAGS="$CFLAGS $ax_compiler_flags_test $flag" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$as_CACHEVAR=yes" +else + eval "$as_CACHEVAR=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS=$ax_check_save_flags +fi +eval ac_res=\$$as_CACHEVAR + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : + +if ${WARN_CFLAGS+:} false; then : + + case " $WARN_CFLAGS " in #( + *" $flag "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS already contains \$flag"; } >&5 + (: WARN_CFLAGS already contains $flag) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append WARN_CFLAGS " $flag" + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 + (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + WARN_CFLAGS=$flag + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 + (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + +else + : +fi + +done + + if test "$ax_compiler_cxx" = "no" ; then + # C-only flags. Warn in C++ + + + + +for flag in -Wnested-externs -Wmissing-prototypes -Wstrict-prototypes -Wdeclaration-after-statement -Wimplicit-function-declaration -Wold-style-definition -Wjump-misses-init ; do + as_CACHEVAR=`$as_echo "ax_cv_check_cflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts $flag" >&5 +$as_echo_n "checking whether C compiler accepts $flag... " >&6; } +if eval \${$as_CACHEVAR+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$CFLAGS + CFLAGS="$CFLAGS $ax_compiler_flags_test $flag" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$as_CACHEVAR=yes" +else + eval "$as_CACHEVAR=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS=$ax_check_save_flags +fi +eval ac_res=\$$as_CACHEVAR + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : + +if ${WARN_CFLAGS+:} false; then : + + case " $WARN_CFLAGS " in #( + *" $flag "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS already contains \$flag"; } >&5 + (: WARN_CFLAGS already contains $flag) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append WARN_CFLAGS " $flag" + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 + (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + WARN_CFLAGS=$flag + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 + (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + +else + : +fi + +done + + fi + +fi + if test "$ax_enable_compile_warnings" = "error"; then : + + # "error" flags; -Werror has to be appended unconditionally because + # it's not possible to test for + # + # suggest-attribute=format is disabled because it gives too many false + # positives + +if ${WARN_CFLAGS+:} false; then : + + case " $WARN_CFLAGS " in #( + *" -Werror "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS already contains -Werror"; } >&5 + (: WARN_CFLAGS already contains -Werror) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append WARN_CFLAGS " -Werror" + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 + (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + WARN_CFLAGS=-Werror + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 + (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + + + + + + +for flag in $ax_compiler_no_suggest_attribute_flags ; do + as_CACHEVAR=`$as_echo "ax_cv_check_cflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts $flag" >&5 +$as_echo_n "checking whether C compiler accepts $flag... " >&6; } +if eval \${$as_CACHEVAR+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$CFLAGS + CFLAGS="$CFLAGS $ax_compiler_flags_test $flag" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$as_CACHEVAR=yes" +else + eval "$as_CACHEVAR=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS=$ax_check_save_flags +fi +eval ac_res=\$$as_CACHEVAR + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : + +if ${WARN_CFLAGS+:} false; then : + + case " $WARN_CFLAGS " in #( + *" $flag "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS already contains \$flag"; } >&5 + (: WARN_CFLAGS already contains $flag) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append WARN_CFLAGS " $flag" + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 + (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + WARN_CFLAGS=$flag + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 + (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + +else + : +fi + +done + + +fi + + # In the flags below, when disabling specific flags, always add *both* + # -Wno-foo and -Wno-error=foo. This fixes the situation where (for example) + # we enable -Werror, disable a flag, and a build bot passes CFLAGS=-Wall, + # which effectively turns that flag back on again as an error. + for flag in $WARN_CFLAGS; do + case $flag in #( + -Wno-*=*) : + ;; #( + -Wno-*) : + + + + + +for flag in -Wno-error=$($as_echo $flag | $SED 's/^-Wno-//'); do + as_CACHEVAR=`$as_echo "ax_cv_check_cflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts $flag" >&5 +$as_echo_n "checking whether C compiler accepts $flag... " >&6; } +if eval \${$as_CACHEVAR+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$CFLAGS + CFLAGS="$CFLAGS $ax_compiler_flags_test $flag" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$as_CACHEVAR=yes" +else + eval "$as_CACHEVAR=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS=$ax_check_save_flags +fi +eval ac_res=\$$as_CACHEVAR + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : + +if ${WARN_CFLAGS+:} false; then : + + case " $WARN_CFLAGS " in #( + *" $flag "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS already contains \$flag"; } >&5 + (: WARN_CFLAGS already contains $flag) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append WARN_CFLAGS " $flag" + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 + (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + WARN_CFLAGS=$flag + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_CFLAGS=\"\$WARN_CFLAGS\""; } >&5 + (: WARN_CFLAGS="$WARN_CFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + +else + : +fi + +done + + ;; #( + *) : + ;; +esac + done + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + # Substitute the variables + + + + + + + + + + + + + + # Variable names + + + # Always pass -Werror=unknown-warning-option to get Clang to fail on bad + # flags, otherwise they are always appended to the warn_ldflags variable, + # and Clang warns on them for every compilation unit. + # If this is passed to GCC, it will explode, so the flag must be enabled + # conditionally. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether C compiler accepts -Werror=unknown-warning-option" >&5 +$as_echo_n "checking whether C compiler accepts -Werror=unknown-warning-option... " >&6; } +if ${ax_cv_check_cflags___Werror_unknown_warning_option+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$CFLAGS + CFLAGS="$CFLAGS -Werror=unknown-warning-option" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ax_cv_check_cflags___Werror_unknown_warning_option=yes +else + ax_cv_check_cflags___Werror_unknown_warning_option=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS=$ax_check_save_flags +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_cflags___Werror_unknown_warning_option" >&5 +$as_echo "$ax_cv_check_cflags___Werror_unknown_warning_option" >&6; } +if test "x$ax_cv_check_cflags___Werror_unknown_warning_option" = xyes; then : + + ax_compiler_flags_test="-Werror=unknown-warning-option" + +else + + ax_compiler_flags_test="" + +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts -Wl,--as-needed" >&5 +$as_echo_n "checking whether the linker accepts -Wl,--as-needed... " >&6; } +if ${ax_cv_check_ldflags___Wl___as_needed+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,--as-needed" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_cv_check_ldflags___Wl___as_needed=yes +else + ax_cv_check_ldflags___Wl___as_needed=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_ldflags___Wl___as_needed" >&5 +$as_echo "$ax_cv_check_ldflags___Wl___as_needed" >&6; } +if test "x$ax_cv_check_ldflags___Wl___as_needed" = xyes; then : + + + + + +for flag in -Wl,--as-needed; do + as_CACHEVAR=`$as_echo "ax_cv_check_ldflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts $flag" >&5 +$as_echo_n "checking whether the linker accepts $flag... " >&6; } +if eval \${$as_CACHEVAR+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS $ax_compiler_flags_test $flag" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$as_CACHEVAR=yes" +else + eval "$as_CACHEVAR=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +eval ac_res=\$$as_CACHEVAR + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : + +if ${AM_LDFLAGS+:} false; then : + + case " $AM_LDFLAGS " in #( + *" $flag "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : AM_LDFLAGS already contains \$flag"; } >&5 + (: AM_LDFLAGS already contains $flag) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append AM_LDFLAGS " $flag" + { { $as_echo "$as_me:${as_lineno-$LINENO}: : AM_LDFLAGS=\"\$AM_LDFLAGS\""; } >&5 + (: AM_LDFLAGS="$AM_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + AM_LDFLAGS=$flag + { { $as_echo "$as_me:${as_lineno-$LINENO}: : AM_LDFLAGS=\"\$AM_LDFLAGS\""; } >&5 + (: AM_LDFLAGS="$AM_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + +else + : +fi + +done + + +else + : +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts -Wl,-z,relro" >&5 +$as_echo_n "checking whether the linker accepts -Wl,-z,relro... " >&6; } +if ${ax_cv_check_ldflags___Wl__z_relro+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-z,relro" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_cv_check_ldflags___Wl__z_relro=yes +else + ax_cv_check_ldflags___Wl__z_relro=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_ldflags___Wl__z_relro" >&5 +$as_echo "$ax_cv_check_ldflags___Wl__z_relro" >&6; } +if test "x$ax_cv_check_ldflags___Wl__z_relro" = xyes; then : + + + + + +for flag in -Wl,-z,relro; do + as_CACHEVAR=`$as_echo "ax_cv_check_ldflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts $flag" >&5 +$as_echo_n "checking whether the linker accepts $flag... " >&6; } +if eval \${$as_CACHEVAR+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS $ax_compiler_flags_test $flag" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$as_CACHEVAR=yes" +else + eval "$as_CACHEVAR=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +eval ac_res=\$$as_CACHEVAR + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : + +if ${AM_LDFLAGS+:} false; then : + + case " $AM_LDFLAGS " in #( + *" $flag "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : AM_LDFLAGS already contains \$flag"; } >&5 + (: AM_LDFLAGS already contains $flag) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append AM_LDFLAGS " $flag" + { { $as_echo "$as_me:${as_lineno-$LINENO}: : AM_LDFLAGS=\"\$AM_LDFLAGS\""; } >&5 + (: AM_LDFLAGS="$AM_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + AM_LDFLAGS=$flag + { { $as_echo "$as_me:${as_lineno-$LINENO}: : AM_LDFLAGS=\"\$AM_LDFLAGS\""; } >&5 + (: AM_LDFLAGS="$AM_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + +else + : +fi + +done + + +else + : +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts -Wl,-z,now" >&5 +$as_echo_n "checking whether the linker accepts -Wl,-z,now... " >&6; } +if ${ax_cv_check_ldflags___Wl__z_now+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-z,now" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_cv_check_ldflags___Wl__z_now=yes +else + ax_cv_check_ldflags___Wl__z_now=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_ldflags___Wl__z_now" >&5 +$as_echo "$ax_cv_check_ldflags___Wl__z_now" >&6; } +if test "x$ax_cv_check_ldflags___Wl__z_now" = xyes; then : + + + + + +for flag in -Wl,-z,now; do + as_CACHEVAR=`$as_echo "ax_cv_check_ldflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts $flag" >&5 +$as_echo_n "checking whether the linker accepts $flag... " >&6; } +if eval \${$as_CACHEVAR+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS $ax_compiler_flags_test $flag" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$as_CACHEVAR=yes" +else + eval "$as_CACHEVAR=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +eval ac_res=\$$as_CACHEVAR + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : + +if ${AM_LDFLAGS+:} false; then : + + case " $AM_LDFLAGS " in #( + *" $flag "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : AM_LDFLAGS already contains \$flag"; } >&5 + (: AM_LDFLAGS already contains $flag) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append AM_LDFLAGS " $flag" + { { $as_echo "$as_me:${as_lineno-$LINENO}: : AM_LDFLAGS=\"\$AM_LDFLAGS\""; } >&5 + (: AM_LDFLAGS="$AM_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + AM_LDFLAGS=$flag + { { $as_echo "$as_me:${as_lineno-$LINENO}: : AM_LDFLAGS=\"\$AM_LDFLAGS\""; } >&5 + (: AM_LDFLAGS="$AM_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + +else + : +fi + +done + + +else + : +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts -Wl,-z,noexecstack" >&5 +$as_echo_n "checking whether the linker accepts -Wl,-z,noexecstack... " >&6; } +if ${ax_cv_check_ldflags___Wl__z_noexecstack+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-z,noexecstack" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_cv_check_ldflags___Wl__z_noexecstack=yes +else + ax_cv_check_ldflags___Wl__z_noexecstack=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_ldflags___Wl__z_noexecstack" >&5 +$as_echo "$ax_cv_check_ldflags___Wl__z_noexecstack" >&6; } +if test "x$ax_cv_check_ldflags___Wl__z_noexecstack" = xyes; then : + + + + + +for flag in -Wl,-z,noexecstack; do + as_CACHEVAR=`$as_echo "ax_cv_check_ldflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts $flag" >&5 +$as_echo_n "checking whether the linker accepts $flag... " >&6; } +if eval \${$as_CACHEVAR+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS $ax_compiler_flags_test $flag" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$as_CACHEVAR=yes" +else + eval "$as_CACHEVAR=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +eval ac_res=\$$as_CACHEVAR + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : + +if ${AM_LDFLAGS+:} false; then : + + case " $AM_LDFLAGS " in #( + *" $flag "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : AM_LDFLAGS already contains \$flag"; } >&5 + (: AM_LDFLAGS already contains $flag) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append AM_LDFLAGS " $flag" + { { $as_echo "$as_me:${as_lineno-$LINENO}: : AM_LDFLAGS=\"\$AM_LDFLAGS\""; } >&5 + (: AM_LDFLAGS="$AM_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + AM_LDFLAGS=$flag + { { $as_echo "$as_me:${as_lineno-$LINENO}: : AM_LDFLAGS=\"\$AM_LDFLAGS\""; } >&5 + (: AM_LDFLAGS="$AM_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + +else + : +fi + +done + + +else + : +fi + + # textonly, retpolineplt not yet + + # macOS and cygwin linker do not have --as-needed + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts -Wl,--no-as-needed" >&5 +$as_echo_n "checking whether the linker accepts -Wl,--no-as-needed... " >&6; } +if ${ax_cv_check_ldflags___Wl___no_as_needed+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,--no-as-needed" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_cv_check_ldflags___Wl___no_as_needed=yes +else + ax_cv_check_ldflags___Wl___no_as_needed=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_ldflags___Wl___no_as_needed" >&5 +$as_echo "$ax_cv_check_ldflags___Wl___no_as_needed" >&6; } +if test "x$ax_cv_check_ldflags___Wl___no_as_needed" = xyes; then : + + ax_compiler_flags_as_needed_option="-Wl,--no-as-needed" + +else + + ax_compiler_flags_as_needed_option="" + +fi + + + # macOS linker speaks with a different accent + ax_compiler_flags_fatal_warnings_option="" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts -Wl,--fatal-warnings" >&5 +$as_echo_n "checking whether the linker accepts -Wl,--fatal-warnings... " >&6; } +if ${ax_cv_check_ldflags___Wl___fatal_warnings+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,--fatal-warnings" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_cv_check_ldflags___Wl___fatal_warnings=yes +else + ax_cv_check_ldflags___Wl___fatal_warnings=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_ldflags___Wl___fatal_warnings" >&5 +$as_echo "$ax_cv_check_ldflags___Wl___fatal_warnings" >&6; } +if test "x$ax_cv_check_ldflags___Wl___fatal_warnings" = xyes; then : + + ax_compiler_flags_fatal_warnings_option="-Wl,--fatal-warnings" + +else + : +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts -Wl,-fatal_warnings" >&5 +$as_echo_n "checking whether the linker accepts -Wl,-fatal_warnings... " >&6; } +if ${ax_cv_check_ldflags___Wl__fatal_warnings+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-fatal_warnings" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_cv_check_ldflags___Wl__fatal_warnings=yes +else + ax_cv_check_ldflags___Wl__fatal_warnings=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_check_ldflags___Wl__fatal_warnings" >&5 +$as_echo "$ax_cv_check_ldflags___Wl__fatal_warnings" >&6; } +if test "x$ax_cv_check_ldflags___Wl__fatal_warnings" = xyes; then : + + ax_compiler_flags_fatal_warnings_option="-Wl,-fatal_warnings" + +else + : +fi + + + # Base flags + + + + +for flag in $ax_compiler_flags_as_needed_option ; do + as_CACHEVAR=`$as_echo "ax_cv_check_ldflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts $flag" >&5 +$as_echo_n "checking whether the linker accepts $flag... " >&6; } +if eval \${$as_CACHEVAR+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS $ax_compiler_flags_test $flag" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$as_CACHEVAR=yes" +else + eval "$as_CACHEVAR=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +eval ac_res=\$$as_CACHEVAR + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : + +if ${WARN_LDFLAGS+:} false; then : + + case " $WARN_LDFLAGS " in #( + *" $flag "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS already contains \$flag"; } >&5 + (: WARN_LDFLAGS already contains $flag) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append WARN_LDFLAGS " $flag" + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS=\"\$WARN_LDFLAGS\""; } >&5 + (: WARN_LDFLAGS="$WARN_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + WARN_LDFLAGS=$flag + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS=\"\$WARN_LDFLAGS\""; } >&5 + (: WARN_LDFLAGS="$WARN_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + +else + : +fi + +done + + + if test "$ax_enable_compile_warnings" != "no"; then : + + # "yes" flags + + + + +for flag in ; do + as_CACHEVAR=`$as_echo "ax_cv_check_ldflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts $flag" >&5 +$as_echo_n "checking whether the linker accepts $flag... " >&6; } +if eval \${$as_CACHEVAR+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS $ax_compiler_flags_test $flag" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$as_CACHEVAR=yes" +else + eval "$as_CACHEVAR=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +eval ac_res=\$$as_CACHEVAR + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : + +if ${WARN_LDFLAGS+:} false; then : + + case " $WARN_LDFLAGS " in #( + *" $flag "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS already contains \$flag"; } >&5 + (: WARN_LDFLAGS already contains $flag) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append WARN_LDFLAGS " $flag" + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS=\"\$WARN_LDFLAGS\""; } >&5 + (: WARN_LDFLAGS="$WARN_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + WARN_LDFLAGS=$flag + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS=\"\$WARN_LDFLAGS\""; } >&5 + (: WARN_LDFLAGS="$WARN_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + +else + : +fi + +done + + +fi + if test "$ax_enable_compile_warnings" = "error"; then : + + # "error" flags; -Werror has to be appended unconditionally because + # it's not possible to test for + # + # suggest-attribute=format is disabled because it gives too many false + # positives + + + + +for flag in $ax_compiler_flags_fatal_warnings_option ; do + as_CACHEVAR=`$as_echo "ax_cv_check_ldflags_$ax_compiler_flags_test_$flag" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts $flag" >&5 +$as_echo_n "checking whether the linker accepts $flag... " >&6; } +if eval \${$as_CACHEVAR+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_check_save_flags=$LDFLAGS + LDFLAGS="$LDFLAGS $ax_compiler_flags_test $flag" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$as_CACHEVAR=yes" +else + eval "$as_CACHEVAR=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_check_save_flags +fi +eval ac_res=\$$as_CACHEVAR + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_CACHEVAR"\" = x"yes"; then : + +if ${WARN_LDFLAGS+:} false; then : + + case " $WARN_LDFLAGS " in #( + *" $flag "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS already contains \$flag"; } >&5 + (: WARN_LDFLAGS already contains $flag) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append WARN_LDFLAGS " $flag" + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS=\"\$WARN_LDFLAGS\""; } >&5 + (: WARN_LDFLAGS="$WARN_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + WARN_LDFLAGS=$flag + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_LDFLAGS=\"\$WARN_LDFLAGS\""; } >&5 + (: WARN_LDFLAGS="$WARN_LDFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + +else + : +fi + +done + + +fi + + # Substitute the variables + + + + + + + # Variable names + + + # Base flags + +if ${WARN_SCANNERFLAGS+:} false; then : + + case " $WARN_SCANNERFLAGS " in #( + *" "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS already contains "; } >&5 + (: WARN_SCANNERFLAGS already contains ) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append WARN_SCANNERFLAGS " " + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS=\"\$WARN_SCANNERFLAGS\""; } >&5 + (: WARN_SCANNERFLAGS="$WARN_SCANNERFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + WARN_SCANNERFLAGS= + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS=\"\$WARN_SCANNERFLAGS\""; } >&5 + (: WARN_SCANNERFLAGS="$WARN_SCANNERFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + + + if test "$ax_enable_compile_warnings" != "no"; then : + + # "yes" flags + +if ${WARN_SCANNERFLAGS+:} false; then : + + case " $WARN_SCANNERFLAGS " in #( + *" --warn-all "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS already contains --warn-all "; } >&5 + (: WARN_SCANNERFLAGS already contains --warn-all ) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append WARN_SCANNERFLAGS " --warn-all " + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS=\"\$WARN_SCANNERFLAGS\""; } >&5 + (: WARN_SCANNERFLAGS="$WARN_SCANNERFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + WARN_SCANNERFLAGS= --warn-all + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS=\"\$WARN_SCANNERFLAGS\""; } >&5 + (: WARN_SCANNERFLAGS="$WARN_SCANNERFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + + +fi + if test "$ax_enable_compile_warnings" = "error"; then : + + # "error" flags + +if ${WARN_SCANNERFLAGS+:} false; then : + + case " $WARN_SCANNERFLAGS " in #( + *" --warn-error "*) : + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS already contains --warn-error "; } >&5 + (: WARN_SCANNERFLAGS already contains --warn-error ) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } ;; #( + *) : + + as_fn_append WARN_SCANNERFLAGS " --warn-error " + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS=\"\$WARN_SCANNERFLAGS\""; } >&5 + (: WARN_SCANNERFLAGS="$WARN_SCANNERFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + ;; +esac + +else + + WARN_SCANNERFLAGS= --warn-error + { { $as_echo "$as_me:${as_lineno-$LINENO}: : WARN_SCANNERFLAGS=\"\$WARN_SCANNERFLAGS\""; } >&5 + (: WARN_SCANNERFLAGS="$WARN_SCANNERFLAGS") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + +fi + + +fi + + # Substitute the variables + + + + +# Check whether --enable-deprecations was given. +if test "${enable_deprecations+set}" = set; then : + enableval=$enable_deprecations; enable_deprecations=$enableval +else + enable_deprecations="yes" +fi + + +if test "$enable_deprecations" = "no"; then + DISABLE_DEPRECATED_CFLAGS="\ +-DG_DISABLE_DEPRECATED \ +-DGDK_DISABLE_DEPRECATED \ +-DGTK_DISABLE_DEPRECATED \ +-DGDK_PIXBUF_DISABLE_DEPRECATED" + + +fi + +# Symbol visibility handling +HIDDEN_VISIBILITY_CFLAGS="" +case "$host" in + *-*-mingw*) + +$as_echo "#define _GTK_SOURCE_EXTERN __attribute__((visibility(\"default\"))) __declspec(dllexport) extern" >>confdefs.h + + HIDDEN_VISIBILITY_CFLAGS="-fvisibility=hidden" + ;; + *) + SAVED_CFLAGS="${CFLAGS}" + CFLAGS="-fvisibility=hidden" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -fvisibility=hidden compiler flag" >&5 +$as_echo_n "checking for -fvisibility=hidden compiler flag... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +return 0 + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + enable_fvisibility_hidden=yes +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + enable_fvisibility_hidden=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + CFLAGS="${SAVED_CFLAGS}" + + if test "${enable_fvisibility_hidden}" = "yes"; then : + + +$as_echo "#define _GTK_SOURCE_EXTERN __attribute__((visibility(\"default\"))) extern" >>confdefs.h + + HIDDEN_VISIBILITY_CFLAGS="-fvisibility=hidden" + +fi + ;; +esac + + + + + + + + + AX_PACKAGE_REQUIRES="$AX_PACKAGE_REQUIRES glib-2.0 >= $glib_req gio-2.0 >= $glib_req gtk+-3.0 >= $gtk_req" + AX_PACKAGE_REQUIRES_PRIVATE="$AX_PACKAGE_REQUIRES_PRIVATE libxml-2.0 >= $libxml_req" + + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DEP" >&5 +$as_echo_n "checking for DEP... " >&6; } + +if test -n "$DEP_CFLAGS"; then + pkg_cv_DEP_CFLAGS="$DEP_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$glib_req gio-2.0 >= \$glib_req gtk+-3.0 >= \$gtk_req libxml-2.0 >= \$libxml_req\""; } >&5 + ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $glib_req gio-2.0 >= $glib_req gtk+-3.0 >= $gtk_req libxml-2.0 >= $libxml_req") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_DEP_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $glib_req gio-2.0 >= $glib_req gtk+-3.0 >= $gtk_req libxml-2.0 >= $libxml_req" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$DEP_LIBS"; then + pkg_cv_DEP_LIBS="$DEP_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$glib_req gio-2.0 >= \$glib_req gtk+-3.0 >= \$gtk_req libxml-2.0 >= \$libxml_req\""; } >&5 + ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $glib_req gio-2.0 >= $glib_req gtk+-3.0 >= $gtk_req libxml-2.0 >= $libxml_req") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_DEP_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $glib_req gio-2.0 >= $glib_req gtk+-3.0 >= $gtk_req libxml-2.0 >= $libxml_req" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + DEP_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "glib-2.0 >= $glib_req gio-2.0 >= $glib_req gtk+-3.0 >= $gtk_req libxml-2.0 >= $libxml_req" 2>&1` + else + DEP_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "glib-2.0 >= $glib_req gio-2.0 >= $glib_req gtk+-3.0 >= $gtk_req libxml-2.0 >= $libxml_req" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$DEP_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (glib-2.0 >= $glib_req gio-2.0 >= $glib_req gtk+-3.0 >= $gtk_req libxml-2.0 >= $libxml_req) were not met: + +$DEP_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables DEP_CFLAGS +and DEP_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables DEP_CFLAGS +and DEP_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see . +See \`config.log' for more details" "$LINENO" 5; } +else + DEP_CFLAGS=$pkg_cv_DEP_CFLAGS + DEP_LIBS=$pkg_cv_DEP_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + + # Substitute output. + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for native Mac OS X" >&5 +$as_echo_n "checking for native Mac OS X... " >&6; } + + + + pkg_config_args=gtk+-quartz-3.0 + min_gtk_version=3.0.0 + pkg_config_args="$pkg_config_args >= $min_gtk_version" + + + + + + + + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. +set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +PKG_CONFIG=$ac_cv_path_PKG_CONFIG +if test -n "$PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 +$as_echo "$PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_PKG_CONFIG"; then + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +if test -n "$ac_pt_PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 +$as_echo "$ac_pt_PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_PKG_CONFIG" = x; then + PKG_CONFIG="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + PKG_CONFIG=$ac_pt_PKG_CONFIG + fi +else + PKG_CONFIG="$ac_cv_path_PKG_CONFIG" +fi + +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.16 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 +$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + PKG_CONFIG="" + fi +fi + if test -z "$PKG_CONFIG"; then : + as_fn_error $? "No pkg-config found" "$LINENO" 5 +fi + + if $PKG_CONFIG $pkg_config_args ; then + target_found=yes + else + target_found=no + fi + + if test "x$target_found" = "xno"; then + os_osx=no + else + os_osx=yes + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $os_osx" >&5 +$as_echo "$os_osx" >&6; } + if test "$os_osx" = "yes" ; then + OS_OSX_TRUE= + OS_OSX_FALSE='#' +else + OS_OSX_TRUE='#' + OS_OSX_FALSE= +fi + + +if test "$os_osx" = "yes"; then + +$as_echo "#define OS_OSX 1" >>confdefs.h + +fi + +# Check for Glade3 +# Check whether --enable-glade-catalog was given. +if test "${enable_glade_catalog+set}" = set; then : + enableval=$enable_glade_catalog; glade_catalog=$enableval +else + glade_catalog=no +fi + + + if test "$glade_catalog" = "yes" ; then + GLADE_CATALOG_TRUE= + GLADE_CATALOG_FALSE='#' +else + GLADE_CATALOG_TRUE='#' + GLADE_CATALOG_FALSE= +fi + + +if test "$glade_catalog" = "yes" ; then : + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GLADE" >&5 +$as_echo_n "checking for GLADE... " >&6; } + +if test -n "$GLADE_CFLAGS"; then + pkg_cv_GLADE_CFLAGS="$GLADE_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gladeui-2.0 >= \$gladeui_req\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gladeui-2.0 >= $gladeui_req") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GLADE_CFLAGS=`$PKG_CONFIG --cflags "gladeui-2.0 >= $gladeui_req" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$GLADE_LIBS"; then + pkg_cv_GLADE_LIBS="$GLADE_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gladeui-2.0 >= \$gladeui_req\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gladeui-2.0 >= $gladeui_req") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GLADE_LIBS=`$PKG_CONFIG --libs "gladeui-2.0 >= $gladeui_req" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + GLADE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gladeui-2.0 >= $gladeui_req" 2>&1` + else + GLADE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gladeui-2.0 >= $gladeui_req" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$GLADE_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (gladeui-2.0 >= $gladeui_req) were not met: + +$GLADE_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables GLADE_CFLAGS +and GLADE_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables GLADE_CFLAGS +and GLADE_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see . +See \`config.log' for more details" "$LINENO" 5; } +else + GLADE_CFLAGS=$pkg_cv_GLADE_CFLAGS + GLADE_LIBS=$pkg_cv_GLADE_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to install Glade catalog" >&5 +$as_echo_n "checking whether to install Glade catalog... " >&6; } + GLADE_CATALOG_DIR=`$PKG_CONFIG --variable=catalogdir gladeui-2.0 2>&5` + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLADE_CATALOG_DIR" >&5 +$as_echo "$GLADE_CATALOG_DIR" >&6; } + +fi + +# i18n + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 +$as_echo_n "checking whether NLS is requested... " >&6; } + # Check whether --enable-nls was given. +if test "${enable_nls+set}" = set; then : + enableval=$enable_nls; USE_NLS=$enableval +else + USE_NLS=yes +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 +$as_echo "$USE_NLS" >&6; } + + + + + GETTEXT_MACRO_VERSION=0.19 + + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_MSGFMT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case "$MSGFMT" in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && + (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" + ;; +esac +fi +MSGFMT="$ac_cv_path_MSGFMT" +if test "$MSGFMT" != ":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 +$as_echo "$MSGFMT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + # Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_GMSGFMT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $GMSGFMT in + [\\/]* | ?:[\\/]*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; +esac +fi +GMSGFMT=$ac_cv_path_GMSGFMT +if test -n "$GMSGFMT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 +$as_echo "$GMSGFMT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; + *) MSGFMT_015=$MSGFMT ;; + esac + + case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; + *) GMSGFMT_015=$GMSGFMT ;; + esac + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_XGETTEXT+:} false; then : + $as_echo_n "(cached) " >&6 +else + case "$XGETTEXT" in + [\\/]* | ?:[\\/]*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && + (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" + ;; +esac +fi +XGETTEXT="$ac_cv_path_XGETTEXT" +if test "$XGETTEXT" != ":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 +$as_echo "$XGETTEXT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + rm -f messages.po + + case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; + *) XGETTEXT_015=$XGETTEXT ;; + esac + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "msgmerge", so it can be a program name with args. +set dummy msgmerge; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_MSGMERGE+:} false; then : + $as_echo_n "(cached) " >&6 +else + case "$MSGMERGE" in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then + ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" + ;; +esac +fi +MSGMERGE="$ac_cv_path_MSGMERGE" +if test "$MSGMERGE" != ":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 +$as_echo "$MSGMERGE" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$localedir" || localedir='${datadir}/locale' + + + test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= + + + ac_config_commands="$ac_config_commands po-directories" + + + + if test "X$prefix" = "XNONE"; then + acl_final_prefix="$ac_default_prefix" + else + acl_final_prefix="$prefix" + fi + if test "X$exec_prefix" = "XNONE"; then + acl_final_exec_prefix='${prefix}' + else + acl_final_exec_prefix="$exec_prefix" + fi + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" + prefix="$acl_save_prefix" + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'` + while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${acl_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$acl_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + acl_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$acl_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${acl_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$acl_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$acl_cv_prog_gnu_ld + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5 +$as_echo_n "checking for shared library run path origin... " >&6; } +if ${acl_cv_rpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + + CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ + ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh + . ./conftest.sh + rm -f ./conftest.sh + acl_cv_rpath=done + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5 +$as_echo "$acl_cv_rpath" >&6; } + wl="$acl_cv_wl" + acl_libext="$acl_cv_libext" + acl_shlibext="$acl_cv_shlibext" + acl_libname_spec="$acl_cv_libname_spec" + acl_library_names_spec="$acl_cv_library_names_spec" + acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + acl_hardcode_direct="$acl_cv_hardcode_direct" + acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" + # Check whether --enable-rpath was given. +if test "${enable_rpath+set}" = set; then : + enableval=$enable_rpath; : +else + enable_rpath=yes +fi + + + + + acl_libdirstem=lib + acl_libdirstem2= + case "$host_os" in + solaris*) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5 +$as_echo_n "checking for 64-bit host... " >&6; } +if ${gl_cv_solaris_64bit+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef _LP64 +sixtyfour bits +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "sixtyfour bits" >/dev/null 2>&1; then : + gl_cv_solaris_64bit=yes +else + gl_cv_solaris_64bit=no +fi +rm -f conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5 +$as_echo "$gl_cv_solaris_64bit" >&6; } + if test $gl_cv_solaris_64bit = yes; then + acl_libdirstem=lib/64 + case "$host_cpu" in + sparc*) acl_libdirstem2=lib/sparcv9 ;; + i*86 | x86_64) acl_libdirstem2=lib/amd64 ;; + esac + fi + ;; + *) + searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` + if test -n "$searchpath"; then + acl_save_IFS="${IFS= }"; IFS=":" + for searchdir in $searchpath; do + if test -d "$searchdir"; then + case "$searchdir" in + */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; + */../ | */.. ) + # Better ignore directories of this form. They are misleading. + ;; + *) searchdir=`cd "$searchdir" && pwd` + case "$searchdir" in + */lib64 ) acl_libdirstem=lib64 ;; + esac ;; + esac + fi + done + IFS="$acl_save_IFS" + fi + ;; + esac + test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" + + + + + + + + + + + + + use_additional=yes + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + +# Check whether --with-libiconv-prefix was given. +if test "${with_libiconv_prefix+set}" = set; then : + withval=$with_libiconv_prefix; + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + if test "$acl_libdirstem2" != "$acl_libdirstem" \ + && ! test -d "$withval/$acl_libdirstem"; then + additional_libdir="$withval/$acl_libdirstem2" + fi + fi + fi + +fi + + LIBICONV= + LTLIBICONV= + INCICONV= + LIBICONV_PREFIX= + HAVE_LIBICONV= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='iconv ' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" + else + : + fi + else + found_dir= + found_la= + found_so= + found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi + if test $use_additional = yes; then + dir="$additional_libdir" + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + if test "$acl_hardcode_direct" = yes; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + haveit= + for x in $LDFLAGS $LIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" + fi + if test "$acl_hardcode_minus_L" != no; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" + fi + fi + additional_includedir= + case "$found_dir" in + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = 'iconv'; then + LIBICONV_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = 'iconv'; then + LIBICONV_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INCICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + if test -n "$found_la"; then + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" + ;; + esac + done + fi + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$acl_hardcode_libdir_separator"; then + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" + else + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + for found_dir in $ltrpathdirs; do + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" + done + fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5 +$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; } +if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then : + $as_echo_n "(cached) " >&6 +else + gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +CFPreferencesCopyAppValue(NULL, NULL) + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + gt_cv_func_CFPreferencesCopyAppValue=yes +else + gt_cv_func_CFPreferencesCopyAppValue=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$gt_save_LIBS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 +$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; } + if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then + +$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h + + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5 +$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; } +if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then : + $as_echo_n "(cached) " >&6 +else + gt_save_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +CFLocaleCopyCurrent(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + gt_cv_func_CFLocaleCopyCurrent=yes +else + gt_cv_func_CFLocaleCopyCurrent=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$gt_save_LIBS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5 +$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; } + if test $gt_cv_func_CFLocaleCopyCurrent = yes; then + +$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h + + fi + INTL_MACOSX_LIBS= + if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then + INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" + fi + + + + + + + LIBINTL= + LTLIBINTL= + POSUB= + + case " $gt_needs " in + *" need-formatstring-macros "*) gt_api_version=3 ;; + *" need-ngettext "*) gt_api_version=2 ;; + *) gt_api_version=1 ;; + esac + gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" + gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" + + if test "$USE_NLS" = "yes"; then + gt_use_preinstalled_gnugettext=no + + + if test $gt_api_version -ge 3; then + gt_revision_test_code=' +#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +' + else + gt_revision_test_code= + fi + if test $gt_api_version -ge 2; then + gt_expression_test_code=' + * ngettext ("", "", 0)' + else + gt_expression_test_code= + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5 +$as_echo_n "checking for GNU gettext in libc... " >&6; } +if eval \${$gt_func_gnugettext_libc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +extern int _nl_msg_cat_cntr; +extern int *_nl_domain_bindings; +#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings) +#else +#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 +#endif +$gt_revision_test_code + +int +main () +{ + +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$gt_func_gnugettext_libc=yes" +else + eval "$gt_func_gnugettext_libc=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$gt_func_gnugettext_libc + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + + if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then + + + + + + am_save_CPPFLAGS="$CPPFLAGS" + + for element in $INCICONV; do + haveit= + for x in $CPPFLAGS; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" + fi + done + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5 +$as_echo_n "checking for iconv... " >&6; } +if ${am_cv_func_iconv+:} false; then : + $as_echo_n "(cached) " >&6 +else + + am_cv_func_iconv="no, consider installing GNU libiconv" + am_cv_lib_iconv=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main () +{ +iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + am_cv_func_iconv=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test "$am_cv_func_iconv" != yes; then + am_save_LIBS="$LIBS" + LIBS="$LIBS $LIBICONV" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main () +{ +iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + am_cv_lib_iconv=yes + am_cv_func_iconv=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$am_save_LIBS" + fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5 +$as_echo "$am_cv_func_iconv" >&6; } + if test "$am_cv_func_iconv" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5 +$as_echo_n "checking for working iconv... " >&6; } +if ${am_cv_func_iconv_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + + am_save_LIBS="$LIBS" + if test $am_cv_lib_iconv = yes; then + LIBS="$LIBS $LIBICONV" + fi + am_cv_func_iconv_works=no + for ac_iconv_const in '' 'const'; do + if test "$cross_compiling" = yes; then : + case "$host_os" in + aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; + *) am_cv_func_iconv_works="guessing yes" ;; + esac +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +#ifndef ICONV_CONST +# define ICONV_CONST $ac_iconv_const +#endif + +int +main () +{ +int result = 0; + /* Test against AIX 5.1 bug: Failures are not distinguishable from successful + returns. */ + { + iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); + if (cd_utf8_to_88591 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ + char buf[10]; + ICONV_CONST char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_utf8_to_88591, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + result |= 1; + iconv_close (cd_utf8_to_88591); + } + } + /* Test against Solaris 10 bug: Failures are not distinguishable from + successful returns. */ + { + iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); + if (cd_ascii_to_88591 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\263"; + char buf[10]; + ICONV_CONST char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_ascii_to_88591, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + result |= 2; + iconv_close (cd_ascii_to_88591); + } + } + /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ + { + iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); + if (cd_88591_to_utf8 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\304"; + static char buf[2] = { (char)0xDE, (char)0xAD }; + ICONV_CONST char *inptr = input; + size_t inbytesleft = 1; + char *outptr = buf; + size_t outbytesleft = 1; + size_t res = iconv (cd_88591_to_utf8, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) + result |= 4; + iconv_close (cd_88591_to_utf8); + } + } +#if 0 /* This bug could be worked around by the caller. */ + /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ + { + iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); + if (cd_88591_to_utf8 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; + char buf[50]; + ICONV_CONST char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_88591_to_utf8, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if ((int)res > 0) + result |= 8; + iconv_close (cd_88591_to_utf8); + } + } +#endif + /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is + provided. */ + if (/* Try standardized names. */ + iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) + /* Try IRIX, OSF/1 names. */ + && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) + /* Try AIX names. */ + && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) + /* Try HP-UX names. */ + && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) + result |= 16; + return result; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + am_cv_func_iconv_works=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + test "$am_cv_func_iconv_works" = no || break + done + LIBS="$am_save_LIBS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5 +$as_echo "$am_cv_func_iconv_works" >&6; } + case "$am_cv_func_iconv_works" in + *no) am_func_iconv=no am_cv_lib_iconv=no ;; + *) am_func_iconv=yes ;; + esac + else + am_func_iconv=no am_cv_lib_iconv=no + fi + if test "$am_func_iconv" = yes; then + +$as_echo "#define HAVE_ICONV 1" >>confdefs.h + + fi + if test "$am_cv_lib_iconv" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5 +$as_echo_n "checking how to link with libiconv... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5 +$as_echo "$LIBICONV" >&6; } + else + CPPFLAGS="$am_save_CPPFLAGS" + LIBICONV= + LTLIBICONV= + fi + + + + + + + + + + + + use_additional=yes + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + +# Check whether --with-libintl-prefix was given. +if test "${with_libintl_prefix+set}" = set; then : + withval=$with_libintl_prefix; + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + if test "$acl_libdirstem2" != "$acl_libdirstem" \ + && ! test -d "$withval/$acl_libdirstem"; then + additional_libdir="$withval/$acl_libdirstem2" + fi + fi + fi + +fi + + LIBINTL= + LTLIBINTL= + INCINTL= + LIBINTL_PREFIX= + HAVE_LIBINTL= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='intl ' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" + else + : + fi + else + found_dir= + found_la= + found_so= + found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi + if test $use_additional = yes; then + dir="$additional_libdir" + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext"; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + if test "$acl_hardcode_direct" = yes; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + haveit= + for x in $LDFLAGS $LIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" + fi + if test "$acl_hardcode_minus_L" != no; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" + fi + fi + additional_includedir= + case "$found_dir" in + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = 'intl'; then + LIBINTL_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = 'intl'; then + LIBINTL_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INCINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + if test -n "$found_la"; then + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" + ;; + esac + done + fi + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$acl_hardcode_libdir_separator"; then + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" + else + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + for found_dir in $ltrpathdirs; do + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" + done + fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5 +$as_echo_n "checking for GNU gettext in libintl... " >&6; } +if eval \${$gt_func_gnugettext_libintl+:} false; then : + $as_echo_n "(cached) " >&6 +else + gt_save_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $INCINTL" + gt_save_LIBS="$LIBS" + LIBS="$LIBS $LIBINTL" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (const char *); +#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) +#else +#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 +#endif +$gt_revision_test_code + +int +main () +{ + +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$gt_func_gnugettext_libintl=yes" +else + eval "$gt_func_gnugettext_libintl=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then + LIBS="$LIBS $LIBICONV" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (const char *); +#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) +#else +#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 +#endif +$gt_revision_test_code + +int +main () +{ + +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + LIBINTL="$LIBINTL $LIBICONV" + LTLIBINTL="$LTLIBINTL $LTLIBICONV" + eval "$gt_func_gnugettext_libintl=yes" + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + fi + CPPFLAGS="$gt_save_CPPFLAGS" + LIBS="$gt_save_LIBS" +fi +eval ac_res=\$$gt_func_gnugettext_libintl + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + fi + + if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ + || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ + && test "$PACKAGE" != gettext-runtime \ + && test "$PACKAGE" != gettext-tools; }; then + gt_use_preinstalled_gnugettext=yes + else + LIBINTL= + LTLIBINTL= + INCINTL= + fi + + + + if test -n "$INTL_MACOSX_LIBS"; then + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" + LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" + fi + fi + + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + +$as_echo "#define ENABLE_NLS 1" >>confdefs.h + + else + USE_NLS=no + fi + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5 +$as_echo_n "checking whether to use NLS... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 +$as_echo "$USE_NLS" >&6; } + if test "$USE_NLS" = "yes"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5 +$as_echo_n "checking where the gettext function comes from... " >&6; } + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then + gt_source="external libintl" + else + gt_source="libc" + fi + else + gt_source="included intl directory" + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5 +$as_echo "$gt_source" >&6; } + fi + + if test "$USE_NLS" = "yes"; then + + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5 +$as_echo_n "checking how to link with libintl... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5 +$as_echo "$LIBINTL" >&6; } + + for element in $INCINTL; do + haveit= + for x in $CPPFLAGS; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" + fi + done + + fi + + +$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h + + +$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h + + fi + + POSUB=po + fi + + + + INTLLIBS="$LIBINTL" + + + + + + + + +if test "$USE_NLS" = "yes"; then : + +$as_echo "#define ENABLE_NLS 1" >>confdefs.h + +fi + +GETTEXT_PACKAGE=gtksourceview-$GSV_API_VERSION + + +cat >>confdefs.h <<_ACEOF +#define GETTEXT_PACKAGE "$GETTEXT_PACKAGE" +_ACEOF + + +# Documentation + + + + + + gtk_doc_requires="gtk-doc >= 1.25" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gtk-doc" >&5 +$as_echo_n "checking for gtk-doc... " >&6; } + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$gtk_doc_requires\""; } >&5 + ($PKG_CONFIG --exists --print-errors "$gtk_doc_requires") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + have_gtk_doc=yes +else + have_gtk_doc=no +fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_gtk_doc" >&5 +$as_echo "$have_gtk_doc" >&6; } + + if test "$have_gtk_doc" = "no"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: + You will not be able to create source packages with 'make dist' + because $gtk_doc_requires is not found." >&5 +$as_echo "$as_me: WARNING: + You will not be able to create source packages with 'make dist' + because $gtk_doc_requires is not found." >&2;} + fi + + # Extract the first word of "gtkdoc-check", so it can be a program name with args. +set dummy gtkdoc-check; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_GTKDOC_CHECK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$GTKDOC_CHECK"; then + ac_cv_prog_GTKDOC_CHECK="$GTKDOC_CHECK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_GTKDOC_CHECK="gtkdoc-check.test" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +GTKDOC_CHECK=$ac_cv_prog_GTKDOC_CHECK +if test -n "$GTKDOC_CHECK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_CHECK" >&5 +$as_echo "$GTKDOC_CHECK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + # Extract the first word of "gtkdoc-check", so it can be a program name with args. +set dummy gtkdoc-check; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_GTKDOC_CHECK_PATH+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $GTKDOC_CHECK_PATH in + [\\/]* | ?:[\\/]*) + ac_cv_path_GTKDOC_CHECK_PATH="$GTKDOC_CHECK_PATH" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_GTKDOC_CHECK_PATH="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +GTKDOC_CHECK_PATH=$ac_cv_path_GTKDOC_CHECK_PATH +if test -n "$GTKDOC_CHECK_PATH"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_CHECK_PATH" >&5 +$as_echo "$GTKDOC_CHECK_PATH" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + for ac_prog in gtkdoc-rebase +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_GTKDOC_REBASE+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $GTKDOC_REBASE in + [\\/]* | ?:[\\/]*) + ac_cv_path_GTKDOC_REBASE="$GTKDOC_REBASE" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_GTKDOC_REBASE="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +GTKDOC_REBASE=$ac_cv_path_GTKDOC_REBASE +if test -n "$GTKDOC_REBASE"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_REBASE" >&5 +$as_echo "$GTKDOC_REBASE" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$GTKDOC_REBASE" && break +done +test -n "$GTKDOC_REBASE" || GTKDOC_REBASE="true" + + # Extract the first word of "gtkdoc-mkpdf", so it can be a program name with args. +set dummy gtkdoc-mkpdf; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_GTKDOC_MKPDF+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $GTKDOC_MKPDF in + [\\/]* | ?:[\\/]*) + ac_cv_path_GTKDOC_MKPDF="$GTKDOC_MKPDF" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_GTKDOC_MKPDF="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +GTKDOC_MKPDF=$ac_cv_path_GTKDOC_MKPDF +if test -n "$GTKDOC_MKPDF"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GTKDOC_MKPDF" >&5 +$as_echo "$GTKDOC_MKPDF" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + +# Check whether --with-html-dir was given. +if test "${with_html_dir+set}" = set; then : + withval=$with_html_dir; +else + with_html_dir='${datadir}/gtk-doc/html' +fi + + HTML_DIR="$with_html_dir" + + + # Check whether --enable-gtk-doc was given. +if test "${enable_gtk_doc+set}" = set; then : + enableval=$enable_gtk_doc; +else + enable_gtk_doc=no +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build gtk-doc documentation" >&5 +$as_echo_n "checking whether to build gtk-doc documentation... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_gtk_doc" >&5 +$as_echo "$enable_gtk_doc" >&6; } + + if test "x$enable_gtk_doc" = "xyes" && test "$have_gtk_doc" = "no"; then + as_fn_error $? " + You must have $gtk_doc_requires installed to build documentation for + $PACKAGE_NAME. Please install gtk-doc or disable building the + documentation by adding '--disable-gtk-doc' to '$0'." "$LINENO" 5 + fi + + if test "x$PACKAGE_NAME" != "xglib"; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTKDOC_DEPS" >&5 +$as_echo_n "checking for GTKDOC_DEPS... " >&6; } + +if test -n "$GTKDOC_DEPS_CFLAGS"; then + pkg_cv_GTKDOC_DEPS_CFLAGS="$GTKDOC_DEPS_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GTKDOC_DEPS_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$GTKDOC_DEPS_LIBS"; then + pkg_cv_GTKDOC_DEPS_LIBS="$GTKDOC_DEPS_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GTKDOC_DEPS_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + GTKDOC_DEPS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>&1` + else + GTKDOC_DEPS_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "glib-2.0 >= 2.10.0 gobject-2.0 >= 2.10.0" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$GTKDOC_DEPS_PKG_ERRORS" >&5 + + : +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + : +else + GTKDOC_DEPS_CFLAGS=$pkg_cv_GTKDOC_DEPS_CFLAGS + GTKDOC_DEPS_LIBS=$pkg_cv_GTKDOC_DEPS_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + fi + + # Check whether --enable-gtk-doc-html was given. +if test "${enable_gtk_doc_html+set}" = set; then : + enableval=$enable_gtk_doc_html; +else + enable_gtk_doc_html=yes +fi + + # Check whether --enable-gtk-doc-pdf was given. +if test "${enable_gtk_doc_pdf+set}" = set; then : + enableval=$enable_gtk_doc_pdf; +else + enable_gtk_doc_pdf=no +fi + + + if test -z "$GTKDOC_MKPDF"; then + enable_gtk_doc_pdf=no + fi + + if test -z "$AM_DEFAULT_VERBOSITY"; then + AM_DEFAULT_VERBOSITY=1 + fi + + + if test x$have_gtk_doc = xyes; then + HAVE_GTK_DOC_TRUE= + HAVE_GTK_DOC_FALSE='#' +else + HAVE_GTK_DOC_TRUE='#' + HAVE_GTK_DOC_FALSE= +fi + + if test x$enable_gtk_doc = xyes; then + ENABLE_GTK_DOC_TRUE= + ENABLE_GTK_DOC_FALSE='#' +else + ENABLE_GTK_DOC_TRUE='#' + ENABLE_GTK_DOC_FALSE= +fi + + if test x$enable_gtk_doc_html = xyes; then + GTK_DOC_BUILD_HTML_TRUE= + GTK_DOC_BUILD_HTML_FALSE='#' +else + GTK_DOC_BUILD_HTML_TRUE='#' + GTK_DOC_BUILD_HTML_FALSE= +fi + + if test x$enable_gtk_doc_pdf = xyes; then + GTK_DOC_BUILD_PDF_TRUE= + GTK_DOC_BUILD_PDF_FALSE='#' +else + GTK_DOC_BUILD_PDF_TRUE='#' + GTK_DOC_BUILD_PDF_FALSE= +fi + + if test -n "$LIBTOOL"; then + GTK_DOC_USE_LIBTOOL_TRUE= + GTK_DOC_USE_LIBTOOL_FALSE='#' +else + GTK_DOC_USE_LIBTOOL_TRUE='#' + GTK_DOC_USE_LIBTOOL_FALSE= +fi + + if test -n "$GTKDOC_REBASE"; then + GTK_DOC_USE_REBASE_TRUE= + GTK_DOC_USE_REBASE_FALSE='#' +else + GTK_DOC_USE_REBASE_TRUE='#' + GTK_DOC_USE_REBASE_FALSE= +fi + + + +# Installed Tests for gnome continuous integration +# Check whether --enable-installed_tests was given. +if test "${enable_installed_tests+set}" = set; then : + enableval=$enable_installed_tests; +else + enable_installed_tests=no +fi + + + if test "x$enable_installed_tests" = "xyes"; then + INSTALLED_TESTS_TRUE= + INSTALLED_TESTS_FALSE='#' +else + INSTALLED_TESTS_TRUE='#' + INSTALLED_TESTS_FALSE= +fi + + +# Introspection + + + + + + # Check whether --enable-introspection was given. +if test "${enable_introspection+set}" = set; then : + enableval=$enable_introspection; +else + enable_introspection=auto +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gobject-introspection" >&5 +$as_echo_n "checking for gobject-introspection... " >&6; } + + case $enable_introspection in #( + no) : + found_introspection="no (disabled, use --enable-introspection to enable)" + ;; #( + yes) : + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + : +else + as_fn_error $? "gobject-introspection-1.0 is not installed" "$LINENO" 5 +fi + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0 >= 1.42.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0 >= 1.42.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + found_introspection=yes +else + as_fn_error $? "You need to have gobject-introspection >= 1.42.0 installed to build gtksourceview" "$LINENO" 5 +fi + ;; #( + auto) : + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-introspection-1.0 >= 1.42.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gobject-introspection-1.0 >= 1.42.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + found_introspection=yes +else + found_introspection=no +fi + enable_introspection=$found_introspection + ;; #( + *) : + as_fn_error $? "invalid argument passed to --enable-introspection, should be one of [no/auto/yes]" "$LINENO" 5 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_introspection" >&5 +$as_echo "$found_introspection" >&6; } + + INTROSPECTION_SCANNER= + INTROSPECTION_COMPILER= + INTROSPECTION_GENERATE= + INTROSPECTION_GIRDIR= + INTROSPECTION_TYPELIBDIR= + if test "x$found_introspection" = "xyes"; then + INTROSPECTION_SCANNER=`$PKG_CONFIG --variable=g_ir_scanner gobject-introspection-1.0` + INTROSPECTION_COMPILER=`$PKG_CONFIG --variable=g_ir_compiler gobject-introspection-1.0` + INTROSPECTION_GENERATE=`$PKG_CONFIG --variable=g_ir_generate gobject-introspection-1.0` + INTROSPECTION_GIRDIR=`$PKG_CONFIG --variable=girdir gobject-introspection-1.0` + INTROSPECTION_TYPELIBDIR="$($PKG_CONFIG --variable=typelibdir gobject-introspection-1.0)" + INTROSPECTION_CFLAGS=`$PKG_CONFIG --cflags gobject-introspection-1.0` + INTROSPECTION_LIBS=`$PKG_CONFIG --libs gobject-introspection-1.0` + INTROSPECTION_MAKEFILE=`$PKG_CONFIG --variable=datadir gobject-introspection-1.0`/gobject-introspection-1.0/Makefile.introspection + fi + + + + + + + + + + if test "x$found_introspection" = "xyes"; then + HAVE_INTROSPECTION_TRUE= + HAVE_INTROSPECTION_FALSE='#' +else + HAVE_INTROSPECTION_TRUE='#' + HAVE_INTROSPECTION_FALSE= +fi + + + + +# Code coverage + + + + + + # allow to override gcov location + +# Check whether --with-gcov was given. +if test "${with_gcov+set}" = set; then : + withval=$with_gcov; _AX_CODE_COVERAGE_GCOV_PROG_WITH=$with_gcov +else + _AX_CODE_COVERAGE_GCOV_PROG_WITH=gcov +fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with code coverage support" >&5 +$as_echo_n "checking whether to build with code coverage support... " >&6; } + # Check whether --enable-code-coverage was given. +if test "${enable_code_coverage+set}" = set; then : + enableval=$enable_code_coverage; +else + enable_code_coverage=no +fi + + + if test x$enable_code_coverage = xyes; then + CODE_COVERAGE_ENABLED_TRUE= + CODE_COVERAGE_ENABLED_FALSE='#' +else + CODE_COVERAGE_ENABLED_TRUE='#' + CODE_COVERAGE_ENABLED_FALSE= +fi + + CODE_COVERAGE_ENABLED=$enable_code_coverage + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_code_coverage" >&5 +$as_echo "$enable_code_coverage" >&6; } + + if test "$enable_code_coverage" = "yes" ; then : + + # check for gcov + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}$_AX_CODE_COVERAGE_GCOV_PROG_WITH", so it can be a program name with args. +set dummy ${ac_tool_prefix}$_AX_CODE_COVERAGE_GCOV_PROG_WITH; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_GCOV+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$GCOV"; then + ac_cv_prog_GCOV="$GCOV" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_GCOV="${ac_tool_prefix}$_AX_CODE_COVERAGE_GCOV_PROG_WITH" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +GCOV=$ac_cv_prog_GCOV +if test -n "$GCOV"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCOV" >&5 +$as_echo "$GCOV" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_GCOV"; then + ac_ct_GCOV=$GCOV + # Extract the first word of "$_AX_CODE_COVERAGE_GCOV_PROG_WITH", so it can be a program name with args. +set dummy $_AX_CODE_COVERAGE_GCOV_PROG_WITH; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_GCOV+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_GCOV"; then + ac_cv_prog_ac_ct_GCOV="$ac_ct_GCOV" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_GCOV="$_AX_CODE_COVERAGE_GCOV_PROG_WITH" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_GCOV=$ac_cv_prog_ac_ct_GCOV +if test -n "$ac_ct_GCOV"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_GCOV" >&5 +$as_echo "$ac_ct_GCOV" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_GCOV" = x; then + GCOV=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + GCOV=$ac_ct_GCOV + fi +else + GCOV="$ac_cv_prog_GCOV" +fi + + if test "X$GCOV" = "X:"; then : + as_fn_error $? "gcov is needed to do coverage" "$LINENO" 5 +fi + + + if test "$GCC" = "no" ; then : + + as_fn_error $? "not compiling with gcc, which is required for gcov code coverage" "$LINENO" 5 + +fi + + # Extract the first word of "lcov", so it can be a program name with args. +set dummy lcov; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LCOV+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LCOV"; then + ac_cv_prog_LCOV="$LCOV" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LCOV="lcov" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LCOV=$ac_cv_prog_LCOV +if test -n "$LCOV"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LCOV" >&5 +$as_echo "$LCOV" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + # Extract the first word of "genhtml", so it can be a program name with args. +set dummy genhtml; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_GENHTML+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$GENHTML"; then + ac_cv_prog_GENHTML="$GENHTML" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_GENHTML="genhtml" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +GENHTML=$ac_cv_prog_GENHTML +if test -n "$GENHTML"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GENHTML" >&5 +$as_echo "$GENHTML" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + if test -z "$LCOV" ; then : + + as_fn_error $? "To enable code coverage reporting you must have lcov installed" "$LINENO" 5 + +fi + + if test -z "$GENHTML" ; then : + + as_fn_error $? "Could not find genhtml from the lcov package" "$LINENO" 5 + +fi + + CODE_COVERAGE_CPPFLAGS="-DNDEBUG" + CODE_COVERAGE_CFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" + CODE_COVERAGE_CXXFLAGS="-O0 -g -fprofile-arcs -ftest-coverage" + CODE_COVERAGE_LIBS="-lgcov" + CODE_COVERAGE_LDFLAGS="$CODE_COVERAGE_LIBS" + + + + + + + + CODE_COVERAGE_RULES_CHECK=' + -$(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) -k check + $(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) code-coverage-capture +' + CODE_COVERAGE_RULES_CAPTURE=' + $(code_coverage_v_lcov_cap)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(call code_coverage_sanitize,$(PACKAGE_NAME)-$(PACKAGE_VERSION))" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_OPTIONS) + $(code_coverage_v_lcov_ign)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN) --output-file "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_RMOPTS) + -@rm -f $(CODE_COVERAGE_OUTPUT_FILE).tmp + $(code_coverage_v_genhtml)LANG=C $(GENHTML) $(code_coverage_quiet) $(addprefix --prefix ,$(CODE_COVERAGE_DIRECTORY)) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS) + @echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html" +' + CODE_COVERAGE_RULES_CLEAN=' +clean: code-coverage-clean +distclean: code-coverage-clean +code-coverage-clean: + -$(LCOV) --directory $(top_builddir) -z + -rm -rf $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_FILE).tmp $(CODE_COVERAGE_OUTPUT_DIRECTORY) + -find . \( -name "*.gcda" -o -name "*.gcno" -o -name "*.gcov" \) -delete +' + +else + + CODE_COVERAGE_RULES_CHECK=' + @echo "Need to reconfigure with --enable-code-coverage" +' + CODE_COVERAGE_RULES_CAPTURE="$CODE_COVERAGE_RULES_CHECK" + CODE_COVERAGE_RULES_CLEAN='' + +fi + +CODE_COVERAGE_RULES=' +# Code coverage +# +# Optional: +# - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting. +# Multiple directories may be specified, separated by whitespace. +# (Default: $(top_builddir)) +# - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated +# by lcov for code coverage. (Default: +# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info) +# - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage +# reports to be created. (Default: +# $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage) +# - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage, +# set to 0 to disable it and leave empty to stay with the default. +# (Default: empty) +# - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov +# instances. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) +# - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov +# instances. (Default: $CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) +# - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov +# - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the +# collecting lcov instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) +# - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov +# instance. (Default: $CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) +# - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering +# lcov instance. (Default: empty) +# - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov +# instance. (Default: $CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) +# - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the +# genhtml instance. (Default: based on $CODE_COVERAGE_BRANCH_COVERAGE) +# - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml +# instance. (Default: $CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) +# - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore +# +# The generated report will be titled using the $(PACKAGE_NAME) and +# $(PACKAGE_VERSION). In order to add the current git hash to the title, +# use the git-version-gen script, available online. + +# Optional variables +CODE_COVERAGE_DIRECTORY ?= $(top_builddir) +CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info +CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage +CODE_COVERAGE_BRANCH_COVERAGE ?= +CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= $(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ +--rc lcov_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) +CODE_COVERAGE_LCOV_SHOPTS ?= $(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT) +CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)" +CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH) +CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT) +CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?= +CODE_COVERAGE_LCOV_RMOPTS ?= $(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT) +CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=\ +$(if $(CODE_COVERAGE_BRANCH_COVERAGE),\ +--rc genhtml_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE)) +CODE_COVERAGE_GENHTML_OPTIONS ?= $(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT) +CODE_COVERAGE_IGNORE_PATTERN ?= + +GITIGNOREFILES ?= +GITIGNOREFILES += $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY) + +code_coverage_v_lcov_cap = $(code_coverage_v_lcov_cap_$(V)) +code_coverage_v_lcov_cap_ = $(code_coverage_v_lcov_cap_$(AM_DEFAULT_VERBOSITY)) +code_coverage_v_lcov_cap_0 = @echo " LCOV --capture"\ + $(CODE_COVERAGE_OUTPUT_FILE); +code_coverage_v_lcov_ign = $(code_coverage_v_lcov_ign_$(V)) +code_coverage_v_lcov_ign_ = $(code_coverage_v_lcov_ign_$(AM_DEFAULT_VERBOSITY)) +code_coverage_v_lcov_ign_0 = @echo " LCOV --remove /tmp/*"\ + $(CODE_COVERAGE_IGNORE_PATTERN); +code_coverage_v_genhtml = $(code_coverage_v_genhtml_$(V)) +code_coverage_v_genhtml_ = $(code_coverage_v_genhtml_$(AM_DEFAULT_VERBOSITY)) +code_coverage_v_genhtml_0 = @echo " GEN " $(CODE_COVERAGE_OUTPUT_DIRECTORY); +code_coverage_quiet = $(code_coverage_quiet_$(V)) +code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY)) +code_coverage_quiet_0 = --quiet + +# sanitizes the test-name: replaces with underscores: dashes and dots +code_coverage_sanitize = $(subst -,_,$(subst .,_,$(1))) + +# Use recursive makes in order to ignore errors during check +check-code-coverage:'"$CODE_COVERAGE_RULES_CHECK"' + +# Capture code coverage data +code-coverage-capture: code-coverage-capture-hook'"$CODE_COVERAGE_RULES_CAPTURE"' + +# Hook rule executed before code-coverage-capture, overridable by the user +code-coverage-capture-hook: + +'"$CODE_COVERAGE_RULES_CLEAN"' + +A''M_DISTCHECK_CONFIGURE_FLAGS ?= +A''M_DISTCHECK_CONFIGURE_FLAGS += --disable-code-coverage + +.PHONY: check-code-coverage code-coverage-capture code-coverage-capture-hook code-coverage-clean +' + + + + + +# Valgrind check + + + + # Check whether --enable-valgrind was given. +if test "${enable_valgrind+set}" = set; then : + enableval=$enable_valgrind; enable_valgrind=$enableval +else + enable_valgrind= +fi + + + if test "$enable_valgrind" != "no"; then : + + # Check for Valgrind. + # Extract the first word of "valgrind", so it can be a program name with args. +set dummy valgrind; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_VALGRIND+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$VALGRIND"; then + ac_cv_prog_VALGRIND="$VALGRIND" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_VALGRIND="valgrind" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +VALGRIND=$ac_cv_prog_VALGRIND +if test -n "$VALGRIND"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $VALGRIND" >&5 +$as_echo "$VALGRIND" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + if test "$VALGRIND" = ""; then : + + if test "$enable_valgrind" = "yes"; then : + + as_fn_error $? "Could not find valgrind; either install it or reconfigure with --disable-valgrind" "$LINENO" 5 + +else + + enable_valgrind=no + +fi + +else + + enable_valgrind=yes + +fi + +fi + + if test "$enable_valgrind" = "yes"; then + VALGRIND_ENABLED_TRUE= + VALGRIND_ENABLED_FALSE='#' +else + VALGRIND_ENABLED_TRUE='#' + VALGRIND_ENABLED_FALSE= +fi + + VALGRIND_ENABLED=$enable_valgrind + + + # Check for Valgrind tools we care about. + valgrind_enabled_tools= + + # Check whether --enable-valgrind-memcheck was given. +if test "${enable_valgrind_memcheck+set}" = set; then : + enableval=$enable_valgrind_memcheck; enable_valgrind_memcheck=$enableval +else + enable_valgrind_memcheck= +fi + + if test "$enable_valgrind" = "no"; then : + + enable_valgrind_memcheck=no +elif test "$enable_valgrind_memcheck" != "no"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Valgrind tool memcheck" >&5 +$as_echo_n "checking for Valgrind tool memcheck... " >&6; } +if ${ax_cv_valgrind_tool_memcheck+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_cv_valgrind_tool_memcheck=no + + if `$VALGRIND --tool=memcheck --help >/dev/null 2>&1`; then : + + ax_cv_valgrind_tool_memcheck=yes + +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_valgrind_tool_memcheck" >&5 +$as_echo "$ax_cv_valgrind_tool_memcheck" >&6; } + if test "$ax_cv_valgrind_tool_memcheck" = "no"; then : + + if test "$enable_valgrind_memcheck" = "yes"; then : + + as_fn_error $? "Valgrind does not support memcheck; reconfigure with --disable-valgrind-memcheck" "$LINENO" 5 + +else + + enable_valgrind_memcheck=no + +fi + +else + + enable_valgrind_memcheck=yes + +fi + +fi + if test "$enable_valgrind_memcheck" = "yes"; then : + + valgrind_enabled_tools="$valgrind_enabled_tools memcheck" + +fi + ENABLE_VALGRIND_memcheck=$enable_valgrind_memcheck + + + # Check whether --enable-valgrind-helgrind was given. +if test "${enable_valgrind_helgrind+set}" = set; then : + enableval=$enable_valgrind_helgrind; enable_valgrind_helgrind=$enableval +else + enable_valgrind_helgrind= +fi + + if test "$enable_valgrind" = "no"; then : + + enable_valgrind_helgrind=no +elif test "$enable_valgrind_helgrind" != "no"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Valgrind tool helgrind" >&5 +$as_echo_n "checking for Valgrind tool helgrind... " >&6; } +if ${ax_cv_valgrind_tool_helgrind+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_cv_valgrind_tool_helgrind=no + + if `$VALGRIND --tool=helgrind --help >/dev/null 2>&1`; then : + + ax_cv_valgrind_tool_helgrind=yes + +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_valgrind_tool_helgrind" >&5 +$as_echo "$ax_cv_valgrind_tool_helgrind" >&6; } + if test "$ax_cv_valgrind_tool_helgrind" = "no"; then : + + if test "$enable_valgrind_helgrind" = "yes"; then : + + as_fn_error $? "Valgrind does not support helgrind; reconfigure with --disable-valgrind-helgrind" "$LINENO" 5 + +else + + enable_valgrind_helgrind=no + +fi + +else + + enable_valgrind_helgrind=yes + +fi + +fi + if test "$enable_valgrind_helgrind" = "yes"; then : + + valgrind_enabled_tools="$valgrind_enabled_tools helgrind" + +fi + ENABLE_VALGRIND_helgrind=$enable_valgrind_helgrind + + + # Check whether --enable-valgrind-drd was given. +if test "${enable_valgrind_drd+set}" = set; then : + enableval=$enable_valgrind_drd; enable_valgrind_drd=$enableval +else + enable_valgrind_drd= +fi + + if test "$enable_valgrind" = "no"; then : + + enable_valgrind_drd=no +elif test "$enable_valgrind_drd" != "no"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Valgrind tool drd" >&5 +$as_echo_n "checking for Valgrind tool drd... " >&6; } +if ${ax_cv_valgrind_tool_drd+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_cv_valgrind_tool_drd=no + + if `$VALGRIND --tool=drd --help >/dev/null 2>&1`; then : + + ax_cv_valgrind_tool_drd=yes + +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_valgrind_tool_drd" >&5 +$as_echo "$ax_cv_valgrind_tool_drd" >&6; } + if test "$ax_cv_valgrind_tool_drd" = "no"; then : + + if test "$enable_valgrind_drd" = "yes"; then : + + as_fn_error $? "Valgrind does not support drd; reconfigure with --disable-valgrind-drd" "$LINENO" 5 + +else + + enable_valgrind_drd=no + +fi + +else + + enable_valgrind_drd=yes + +fi + +fi + if test "$enable_valgrind_drd" = "yes"; then : + + valgrind_enabled_tools="$valgrind_enabled_tools drd" + +fi + ENABLE_VALGRIND_drd=$enable_valgrind_drd + + + # Check whether --enable-valgrind-sgcheck was given. +if test "${enable_valgrind_sgcheck+set}" = set; then : + enableval=$enable_valgrind_sgcheck; enable_valgrind_sgcheck=$enableval +else + enable_valgrind_sgcheck= +fi + + if test "$enable_valgrind" = "no"; then : + + enable_valgrind_sgcheck=no +elif test "$enable_valgrind_sgcheck" != "no"; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Valgrind tool sgcheck" >&5 +$as_echo_n "checking for Valgrind tool sgcheck... " >&6; } +if ${ax_cv_valgrind_tool_sgcheck+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_cv_valgrind_tool_sgcheck=no + + if `$VALGRIND --tool=exp-sgcheck --help >/dev/null 2>&1`; then : + + ax_cv_valgrind_tool_sgcheck=yes + +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_valgrind_tool_sgcheck" >&5 +$as_echo "$ax_cv_valgrind_tool_sgcheck" >&6; } + if test "$ax_cv_valgrind_tool_sgcheck" = "no"; then : + + if test "$enable_valgrind_sgcheck" = "yes"; then : + + as_fn_error $? "Valgrind does not support sgcheck; reconfigure with --disable-valgrind-sgcheck" "$LINENO" 5 + +else + + enable_valgrind_sgcheck=no + +fi + +else + + enable_valgrind_sgcheck=yes + +fi + +fi + if test "$enable_valgrind_sgcheck" = "yes"; then : + + valgrind_enabled_tools="$valgrind_enabled_tools sgcheck" + +fi + ENABLE_VALGRIND_sgcheck=$enable_valgrind_sgcheck + + + valgrind_tools="memcheck helgrind drd sgcheck" + + valgrind_enabled_tools=$valgrind_enabled_tools + + +VALGRIND_CHECK_RULES=' +# Valgrind check +# +# Optional: +# - VALGRIND_SUPPRESSIONS_FILES: Space-separated list of Valgrind suppressions +# files to load. (Default: empty) +# - VALGRIND_FLAGS: General flags to pass to all Valgrind tools. +# (Default: --num-callers=30) +# - VALGRIND_$toolname_FLAGS: Flags to pass to Valgrind $toolname (one of: +# memcheck, helgrind, drd, sgcheck). (Default: various) + +# Optional variables +VALGRIND_SUPPRESSIONS ?= $(addprefix --suppressions=,$(VALGRIND_SUPPRESSIONS_FILES)) +VALGRIND_FLAGS ?= --num-callers=30 +VALGRIND_memcheck_FLAGS ?= --leak-check=full --show-reachable=no +VALGRIND_helgrind_FLAGS ?= --history-level=approx +VALGRIND_drd_FLAGS ?= +VALGRIND_sgcheck_FLAGS ?= + +# Internal use +valgrind_log_files = $(addprefix test-suite-,$(addsuffix .log,$(valgrind_tools))) + +valgrind_memcheck_flags = --tool=memcheck $(VALGRIND_memcheck_FLAGS) +valgrind_helgrind_flags = --tool=helgrind $(VALGRIND_helgrind_FLAGS) +valgrind_drd_flags = --tool=drd $(VALGRIND_drd_FLAGS) +valgrind_sgcheck_flags = --tool=exp-sgcheck $(VALGRIND_sgcheck_FLAGS) + +valgrind_quiet = $(valgrind_quiet_$(V)) +valgrind_quiet_ = $(valgrind_quiet_$(AM_DEFAULT_VERBOSITY)) +valgrind_quiet_0 = --quiet +valgrind_v_use = $(valgrind_v_use_$(V)) +valgrind_v_use_ = $(valgrind_v_use_$(AM_DEFAULT_VERBOSITY)) +valgrind_v_use_0 = @echo " USE " $(patsubst check-valgrind-%-am,%,$''@):; + +# Support running with and without libtool. +ifneq ($(LIBTOOL),) +valgrind_lt = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=execute +else +valgrind_lt = +endif + +# Use recursive makes in order to ignore errors during check +check-valgrind-am: +ifeq ($(VALGRIND_ENABLED),yes) + $(A''M_V_at)$(MAKE) $(AM_MAKEFLAGS) -k \ + $(foreach tool, $(valgrind_enabled_tools), check-valgrind-$(tool)) +else + @echo "Need to reconfigure with --enable-valgrind" +endif + +# Valgrind running +VALGRIND_TESTS_ENVIRONMENT = \ + $(TESTS_ENVIRONMENT) \ + env VALGRIND=$(VALGRIND) \ + G_SLICE=always-malloc,debug-blocks \ + G_DEBUG=fatal-warnings,fatal-criticals,gc-friendly + +VALGRIND_LOG_COMPILER = \ + $(valgrind_lt) \ + $(VALGRIND) $(VALGRIND_SUPPRESSIONS) --error-exitcode=1 $(VALGRIND_FLAGS) + +define valgrind_tool_rule +check-valgrind-$(1)-am: +ifeq ($$(VALGRIND_ENABLED)-$$(ENABLE_VALGRIND_$(1)),yes-yes) +ifneq ($$(TESTS),) + $$(valgrind_v_use)$$(MAKE) check-TESTS \ + TESTS_ENVIRONMENT="$$(VALGRIND_TESTS_ENVIRONMENT)" \ + LOG_COMPILER="$$(VALGRIND_LOG_COMPILER)" \ + LOG_FLAGS="$$(valgrind_$(1)_flags)" \ + TEST_SUITE_LOG=test-suite-$(1).log +endif +else ifeq ($$(VALGRIND_ENABLED),yes) + @echo "Need to reconfigure with --enable-valgrind-$(1)" +else + @echo "Need to reconfigure with --enable-valgrind" +endif +endef + +$(foreach tool,$(valgrind_tools),$(eval $(call valgrind_tool_rule,$(tool)))) + +A''M_DISTCHECK_CONFIGURE_FLAGS ?= +A''M_DISTCHECK_CONFIGURE_FLAGS += --disable-valgrind + +MOSTLYCLEANFILES ?= +MOSTLYCLEANFILES += $(valgrind_log_files) + +.PHONY: check-valgrind $(add-prefix check-valgrind-,$(valgrind_tools)) +' + + + + + +# Vala + + + + if test "x" != "xyes"; then : + + + +fi + + # Check whether --enable-vala was given. +if test "${enable_vala+set}" = set; then : + enableval=$enable_vala; +else + + if test "x" = "x"; then : + + enable_vala=auto + +else + + enable_vala= + +fi + +fi + + + case $enable_vala in #( + no) : + enable_vala=no ;; #( + yes) : + + if test "x" != "xyes" -a "x$found_introspection" != "xyes"; then : + + as_fn_error $? "Vala bindings require GObject Introspection" "$LINENO" 5 + +fi + ;; #( + auto) : + + if test "x" != "xyes" -a "x$found_introspection" != "xyes"; then : + + enable_vala=no + +fi + ;; #( + *) : + + as_fn_error $? "Invalid argument passed to --enable-vala, should be one of [no/auto/yes]" "$LINENO" 5 + ;; +esac + + if test "x" = "x"; then : + + vapigen_pkg_name=vapigen + +else + + vapigen_pkg_name=vapigen- + +fi + if test "x" = "x"; then : + + vapigen_pkg="$vapigen_pkg_name" + +else + + vapigen_pkg="$vapigen_pkg_name >= " + +fi + + + + + + + + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. +set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +PKG_CONFIG=$ac_cv_path_PKG_CONFIG +if test -n "$PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 +$as_echo "$PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_PKG_CONFIG"; then + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +if test -n "$ac_pt_PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 +$as_echo "$ac_pt_PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_PKG_CONFIG" = x; then + PKG_CONFIG="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + PKG_CONFIG=$ac_pt_PKG_CONFIG + fi +else + PKG_CONFIG="$ac_cv_path_PKG_CONFIG" +fi + +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.9.0 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 +$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + PKG_CONFIG="" + fi +fi + + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"\$vapigen_pkg\""; } >&5 + ($PKG_CONFIG --exists --print-errors "$vapigen_pkg") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + + if test "$enable_vala" = "auto"; then : + + enable_vala=yes + +fi + +else + + case $enable_vala in #( + yes) : + + as_fn_error $? "$vapigen_pkg not found" "$LINENO" 5 + ;; #( + auto) : + + enable_vala=no + ;; #( + *) : + ;; +esac + +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for vapigen" >&5 +$as_echo_n "checking for vapigen... " >&6; } + + case $enable_vala in #( + yes) : + + VAPIGEN=`$PKG_CONFIG --variable=vapigen $vapigen_pkg_name` + VAPIGEN_MAKEFILE=`$PKG_CONFIG --variable=datadir $vapigen_pkg_name`/vala/Makefile.vapigen + if test "x" = "x"; then : + + VAPIGEN_VAPIDIR=`$PKG_CONFIG --variable=vapidir $vapigen_pkg_name` + +else + + VAPIGEN_VAPIDIR=`$PKG_CONFIG --variable=vapidir_versioned $vapigen_pkg_name` + +fi + ;; #( + *) : + ;; +esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_vala" >&5 +$as_echo "$enable_vala" >&6; } + + + + + + if test "x$enable_vala" = "xyes"; then + ENABLE_VAPIGEN_TRUE= + ENABLE_VAPIGEN_FALSE='#' +else + ENABLE_VAPIGEN_TRUE='#' + ENABLE_VAPIGEN_FALSE= +fi + + + +# test-widget uses this to find lang files and gtksourcebuffer.c +ABS_TOP_SRCDIR=`cd $srcdir && pwd` + + +# Check whether MSVC toolset is explicitly set + + if test x$MSVC_BASE_TOOLSET = x; then + MSVC_BASE_NO_TOOLSET_SET_TRUE= + MSVC_BASE_NO_TOOLSET_SET_FALSE='#' +else + MSVC_BASE_NO_TOOLSET_SET_TRUE='#' + MSVC_BASE_NO_TOOLSET_SET_FALSE= +fi + + if test x$MSVC_TOOLSET = x; then + MSVC_NO_TOOLSET_SET_TRUE= + MSVC_NO_TOOLSET_SET_FALSE='#' +else + MSVC_NO_TOOLSET_SET_TRUE='#' + MSVC_NO_TOOLSET_SET_FALSE= +fi + + +# Output files +ac_config_files="$ac_config_files gtksourceview-${GSV_API_VERSION}.pc:gtksourceview.pc.in Makefile config.h.win32 win32/Makefile win32/vs9/Makefile win32/vs9/gtksourceview-version-paths.vsprops win32/vs10/Makefile win32/vs10/gtksourceview-version-paths.props win32/vs11/Makefile win32/vs12/Makefile win32/vs14/Makefile win32/vs15/Makefile data/Makefile data/glade/Makefile data/glade/gtksourceview.xml data/language-specs/Makefile data/styles/Makefile docs/Makefile docs/reference/Makefile docs/reference/gtksourceview-docs.xml docs/reference/intro.xml docs/reference/lang-reference.xml docs/reference/style-reference.xml gtksourceview/Makefile gtksourceview/gtksourceversion.h gtksourceview/GtkSource-${GSV_API_VERSION}.metadata:gtksourceview/GtkSource.metadata.in gtksourceview/completion-providers/Makefile gtksourceview/completion-providers/words/Makefile po/Makefile.in tests/Makefile testsuite/Makefile" + + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${OS_OSX_TRUE}" && test -z "${OS_OSX_FALSE}"; then + as_fn_error $? "conditional \"OS_OSX\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${GLADE_CATALOG_TRUE}" && test -z "${GLADE_CATALOG_FALSE}"; then + as_fn_error $? "conditional \"GLADE_CATALOG\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_GTK_DOC_TRUE}" && test -z "${HAVE_GTK_DOC_FALSE}"; then + as_fn_error $? "conditional \"HAVE_GTK_DOC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${ENABLE_GTK_DOC_TRUE}" && test -z "${ENABLE_GTK_DOC_FALSE}"; then + as_fn_error $? "conditional \"ENABLE_GTK_DOC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${GTK_DOC_BUILD_HTML_TRUE}" && test -z "${GTK_DOC_BUILD_HTML_FALSE}"; then + as_fn_error $? "conditional \"GTK_DOC_BUILD_HTML\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${GTK_DOC_BUILD_PDF_TRUE}" && test -z "${GTK_DOC_BUILD_PDF_FALSE}"; then + as_fn_error $? "conditional \"GTK_DOC_BUILD_PDF\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${GTK_DOC_USE_LIBTOOL_TRUE}" && test -z "${GTK_DOC_USE_LIBTOOL_FALSE}"; then + as_fn_error $? "conditional \"GTK_DOC_USE_LIBTOOL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${GTK_DOC_USE_REBASE_TRUE}" && test -z "${GTK_DOC_USE_REBASE_FALSE}"; then + as_fn_error $? "conditional \"GTK_DOC_USE_REBASE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${INSTALLED_TESTS_TRUE}" && test -z "${INSTALLED_TESTS_FALSE}"; then + as_fn_error $? "conditional \"INSTALLED_TESTS\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_INTROSPECTION_TRUE}" && test -z "${HAVE_INTROSPECTION_FALSE}"; then + as_fn_error $? "conditional \"HAVE_INTROSPECTION\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${CODE_COVERAGE_ENABLED_TRUE}" && test -z "${CODE_COVERAGE_ENABLED_FALSE}"; then + as_fn_error $? "conditional \"CODE_COVERAGE_ENABLED\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${VALGRIND_ENABLED_TRUE}" && test -z "${VALGRIND_ENABLED_FALSE}"; then + as_fn_error $? "conditional \"VALGRIND_ENABLED\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${ENABLE_VAPIGEN_TRUE}" && test -z "${ENABLE_VAPIGEN_FALSE}"; then + as_fn_error $? "conditional \"ENABLE_VAPIGEN\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${MSVC_BASE_NO_TOOLSET_SET_TRUE}" && test -z "${MSVC_BASE_NO_TOOLSET_SET_FALSE}"; then + as_fn_error $? "conditional \"MSVC_BASE_NO_TOOLSET_SET\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${MSVC_NO_TOOLSET_SET_TRUE}" && test -z "${MSVC_NO_TOOLSET_SET_FALSE}"; then + as_fn_error $? "conditional \"MSVC_NO_TOOLSET_SET\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by gtksourceview $as_me 3.24.9, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to . +gtksourceview home page: ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +gtksourceview config.status 3.24.9 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' +macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' +SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' +ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' +host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' +host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' +host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' +build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' +build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' +build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' +SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' +Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' +GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' +EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' +FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' +LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' +NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' +LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' +ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' +exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' +lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' +lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' +lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' +reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' +file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' +want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' +DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' +sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' +AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' +archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' +STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' +RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' +lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' +CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' +compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' +GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' +nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' +lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' +objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' +need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' +MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' +LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' +libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' +module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' +postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' +version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' +runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' +libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' +soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' +install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' +finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' +configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`' +configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' +old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' +striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in SHELL \ +ECHO \ +PATH_SEPARATOR \ +SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +OBJDUMP \ +deplibs_check_method \ +file_magic_cmd \ +file_magic_glob \ +want_nocaseglob \ +DLLTOOL \ +sharedlib_from_linklib_cmd \ +AR \ +AR_FLAGS \ +archiver_list_spec \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_import \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +lt_cv_nm_interface \ +nm_file_list_spec \ +lt_cv_truncate_bin \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_pic \ +lt_prog_compiler_wl \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +MANIFEST_TOOL \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_separator \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +install_override_mode \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postlink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +configure_time_dlsearch_path \ +configure_time_lt_sys_library_path; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +ac_aux_dir='$ac_aux_dir' + +# See if we are running on zsh, and set the options that allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + RM='$RM' + ofile='$ofile' + + + +# Capture the value of obsolete ALL_LINGUAS because we need it to compute + # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it + # from automake < 1.5. + eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' + # Capture the value of LINGUAS because we need it to compute CATALOGS. + LINGUAS="${LINGUAS-%UNSET%}" + + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;; + "gtksourceview-${GSV_API_VERSION}.pc") CONFIG_FILES="$CONFIG_FILES gtksourceview-${GSV_API_VERSION}.pc:gtksourceview.pc.in" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "config.h.win32") CONFIG_FILES="$CONFIG_FILES config.h.win32" ;; + "win32/Makefile") CONFIG_FILES="$CONFIG_FILES win32/Makefile" ;; + "win32/vs9/Makefile") CONFIG_FILES="$CONFIG_FILES win32/vs9/Makefile" ;; + "win32/vs9/gtksourceview-version-paths.vsprops") CONFIG_FILES="$CONFIG_FILES win32/vs9/gtksourceview-version-paths.vsprops" ;; + "win32/vs10/Makefile") CONFIG_FILES="$CONFIG_FILES win32/vs10/Makefile" ;; + "win32/vs10/gtksourceview-version-paths.props") CONFIG_FILES="$CONFIG_FILES win32/vs10/gtksourceview-version-paths.props" ;; + "win32/vs11/Makefile") CONFIG_FILES="$CONFIG_FILES win32/vs11/Makefile" ;; + "win32/vs12/Makefile") CONFIG_FILES="$CONFIG_FILES win32/vs12/Makefile" ;; + "win32/vs14/Makefile") CONFIG_FILES="$CONFIG_FILES win32/vs14/Makefile" ;; + "win32/vs15/Makefile") CONFIG_FILES="$CONFIG_FILES win32/vs15/Makefile" ;; + "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; + "data/glade/Makefile") CONFIG_FILES="$CONFIG_FILES data/glade/Makefile" ;; + "data/glade/gtksourceview.xml") CONFIG_FILES="$CONFIG_FILES data/glade/gtksourceview.xml" ;; + "data/language-specs/Makefile") CONFIG_FILES="$CONFIG_FILES data/language-specs/Makefile" ;; + "data/styles/Makefile") CONFIG_FILES="$CONFIG_FILES data/styles/Makefile" ;; + "docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; + "docs/reference/Makefile") CONFIG_FILES="$CONFIG_FILES docs/reference/Makefile" ;; + "docs/reference/gtksourceview-docs.xml") CONFIG_FILES="$CONFIG_FILES docs/reference/gtksourceview-docs.xml" ;; + "docs/reference/intro.xml") CONFIG_FILES="$CONFIG_FILES docs/reference/intro.xml" ;; + "docs/reference/lang-reference.xml") CONFIG_FILES="$CONFIG_FILES docs/reference/lang-reference.xml" ;; + "docs/reference/style-reference.xml") CONFIG_FILES="$CONFIG_FILES docs/reference/style-reference.xml" ;; + "gtksourceview/Makefile") CONFIG_FILES="$CONFIG_FILES gtksourceview/Makefile" ;; + "gtksourceview/gtksourceversion.h") CONFIG_FILES="$CONFIG_FILES gtksourceview/gtksourceversion.h" ;; + "gtksourceview/GtkSource-${GSV_API_VERSION}.metadata") CONFIG_FILES="$CONFIG_FILES gtksourceview/GtkSource-${GSV_API_VERSION}.metadata:gtksourceview/GtkSource.metadata.in" ;; + "gtksourceview/completion-providers/Makefile") CONFIG_FILES="$CONFIG_FILES gtksourceview/completion-providers/Makefile" ;; + "gtksourceview/completion-providers/words/Makefile") CONFIG_FILES="$CONFIG_FILES gtksourceview/completion-providers/words/Makefile" ;; + "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; + "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; + "testsuite/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/Makefile" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + "libtool":C) + + # See if we are running on zsh, and set the options that allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST + fi + + cfgfile=${ofile}T + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL +# Generated automatically by $as_me ($PACKAGE) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. + +# Provide generalized library-building support services. +# Written by Gordon Matzigkeit, 1996 + +# Copyright (C) 2014 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program or library that is built +# using GNU Libtool, you may include this file under the same +# distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + + +# The names of the tagged configurations supported by this script. +available_tags='' + +# Configured defaults for sys_lib_dlsearch_path munging. +: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"} + +# ### BEGIN LIBTOOL CONFIG + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# Shared archive member basename,for filename based shared library versioning on AIX. +shared_archive_member_spec=$shared_archive_member_spec + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that protects backslashes. +ECHO=$lt_ECHO + +# The PATH separator for the build system. +PATH_SEPARATOR=$lt_PATH_SEPARATOR + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# convert \$build file names to \$host format. +to_host_file_cmd=$lt_cv_to_host_file_cmd + +# convert \$build files to toolchain format. +to_tool_file_cmd=$lt_cv_to_tool_file_cmd + +# An object symbol dumper. +OBJDUMP=$lt_OBJDUMP + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method = "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# How to find potential files when deplibs_check_method = "file_magic". +file_magic_glob=$lt_file_magic_glob + +# Find potential files using nocaseglob when deplibs_check_method = "file_magic". +want_nocaseglob=$lt_want_nocaseglob + +# DLL creation program. +DLLTOOL=$lt_DLLTOOL + +# Command to associate shared and link libraries. +sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd + +# The archiver. +AR=$lt_AR + +# Flags to create an archive. +AR_FLAGS=$lt_AR_FLAGS + +# How to feed a file listing to the archiver. +archiver_list_spec=$lt_archiver_list_spec + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Whether to use a lock for old archive extraction. +lock_old_archive_extraction=$lock_old_archive_extraction + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm into a list of symbols to manually relocate. +global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# The name lister interface. +nm_interface=$lt_lt_cv_nm_interface + +# Specify filename containing input files for \$NM. +nm_file_list_spec=$lt_nm_file_list_spec + +# The root where to search for dependent libraries,and where our libraries should be installed. +lt_sysroot=$lt_sysroot + +# Command to truncate a binary pipe. +lt_truncate_bin=$lt_lt_cv_truncate_bin + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Manifest tool. +MANIFEST_TOOL=$lt_MANIFEST_TOOL + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Permission mode override for installation of shared libraries. +install_override_mode=$lt_install_override_mode + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Detected run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path + +# Explicit LT_SYS_LIBRARY_PATH set during ./configure time. +configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \$shlibpath_var if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + cat <<'_LT_EOF' >> "$cfgfile" + +# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + + +# ### END FUNCTIONS SHARED WITH CONFIGURE + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain=$ac_aux_dir/ltmain.sh + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + ;; + "po-directories":C) + for ac_file in $CONFIG_FILES; do + # Support "outfile[:infile[:infile...]]" + case "$ac_file" in + *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + esac + # PO directories have a Makefile.in generated from Makefile.in.in. + case "$ac_file" in */Makefile.in) + # Adjust a relative srcdir. + ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` + ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'` + ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` + # In autoconf-2.13 it is called $ac_given_srcdir. + # In autoconf-2.50 it is called $srcdir. + test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" + case "$ac_given_srcdir" in + .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; + /*) top_srcdir="$ac_given_srcdir" ;; + *) top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + # Treat a directory as a PO directory if and only if it has a + # POTFILES.in file. This allows packages to have multiple PO + # directories under different names or in different locations. + if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then + rm -f "$ac_dir/POTFILES" + test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" + gt_tab=`printf '\t'` + cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" + POMAKEFILEDEPS="POTFILES.in" + # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend + # on $ac_dir but don't depend on user-specified configuration + # parameters. + if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then + # The LINGUAS file contains the set of available languages. + if test -n "$OBSOLETE_ALL_LINGUAS"; then + test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" + fi + ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` + # Hide the ALL_LINGUAS assignment from automake < 1.5. + eval 'ALL_LINGUAS''=$ALL_LINGUAS_' + POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" + else + # The set of available languages was given in configure.in. + # Hide the ALL_LINGUAS assignment from automake < 1.5. + eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' + fi + # Compute POFILES + # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) + # Compute UPDATEPOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) + # Compute DUMMYPOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) + # Compute GMOFILES + # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) + case "$ac_given_srcdir" in + .) srcdirpre= ;; + *) srcdirpre='$(srcdir)/' ;; + esac + POFILES= + UPDATEPOFILES= + DUMMYPOFILES= + GMOFILES= + for lang in $ALL_LINGUAS; do + POFILES="$POFILES $srcdirpre$lang.po" + UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" + DUMMYPOFILES="$DUMMYPOFILES $lang.nop" + GMOFILES="$GMOFILES $srcdirpre$lang.gmo" + done + # CATALOGS depends on both $ac_dir and the user's LINGUAS + # environment variable. + INST_LINGUAS= + if test -n "$ALL_LINGUAS"; then + for presentlang in $ALL_LINGUAS; do + useit=no + if test "%UNSET%" != "$LINGUAS"; then + desiredlanguages="$LINGUAS" + else + desiredlanguages="$ALL_LINGUAS" + fi + for desiredlang in $desiredlanguages; do + # Use the presentlang catalog if desiredlang is + # a. equal to presentlang, or + # b. a variant of presentlang (because in this case, + # presentlang can be used as a fallback for messages + # which are not translated in the desiredlang catalog). + case "$desiredlang" in + "$presentlang"*) useit=yes;; + esac + done + if test $useit = yes; then + INST_LINGUAS="$INST_LINGUAS $presentlang" + fi + done + fi + CATALOGS= + if test -n "$INST_LINGUAS"; then + for lang in $INST_LINGUAS; do + CATALOGS="$CATALOGS $lang.gmo" + done + fi + test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" + sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" + for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do + if test -f "$f"; then + case "$f" in + *.orig | *.bak | *~) ;; + *) cat "$f" >> "$ac_dir/Makefile" ;; + esac + fi + done + fi + ;; + esac + done ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + + + +echo " + +Configuration: + + Source code location: ${srcdir} + Compiler: ${CC} + Glade Catalog: ${glade_catalog} + Documentation: ${enable_gtk_doc} + GObject introspection: ${found_introspection} + Vala: ${enable_vala} + Code coverage: ${enable_code_coverage} + Valgrind check: ${enable_valgrind} + Installed tests: ${enable_installed_tests} +" diff --git a/configure.ac b/configure.ac new file mode 100644 index 0000000..724cc29 --- /dev/null +++ b/configure.ac @@ -0,0 +1,283 @@ +dnl Process this file with autoconf to produce a configure script. + +AC_PREREQ(2.64) + +m4_define(gtksourceview_major_version, 3) +m4_define(gtksourceview_minor_version, 24) +m4_define(gtksourceview_micro_version, 9) +m4_define(gtksourceview_version, gtksourceview_major_version.gtksourceview_minor_version.gtksourceview_micro_version) + +AC_INIT([gtksourceview], + [gtksourceview_version], + [http://bugzilla.gnome.org/enter_bug.cgi?product=gtksourceview], + [gtksourceview], + [https://wiki.gnome.org/Projects/GtkSourceView]) + +AX_IS_RELEASE([git-directory]) + +GTK_SOURCE_MAJOR_VERSION=gtksourceview_major_version +GTK_SOURCE_MINOR_VERSION=gtksourceview_minor_version +GTK_SOURCE_MICRO_VERSION=gtksourceview_micro_version +AC_SUBST(GTK_SOURCE_MAJOR_VERSION) +AC_SUBST(GTK_SOURCE_MINOR_VERSION) +AC_SUBST(GTK_SOURCE_MICRO_VERSION) + +# Libtool versioning +# +# For development releases (if the minor package version is odd), keep the same +# Libtool version. +# +# For a new minor stable release (when incrementing the minor package version +# to an even number), apply the following algorithm step by step: +# 1. If the library source code has changed at all since the last +# update, then increment REVISION. +# 2. If any exported functions or data have been added, removed, or +# changed since the last update, increment CURRENT and set REVISION +# to 0. +# 3. If any exported functions or data have been added since the last +# public release, increment AGE. +# 4. If any exported functions or data have been removed since the last +# public release, set AGE to 0. +# +# When incrementing the API version (usually for a new major package version), +# set CURRENT, REVISION and AGE to 0 since it's like a new library. + +GSV_LT_CURRENT=9 +GSV_LT_REVISION=0 +GSV_LT_AGE=8 +GSV_LT_VERSION="$GSV_LT_CURRENT:$GSV_LT_REVISION:$GSV_LT_AGE" +AC_SUBST(GSV_LT_VERSION) + +# API version, used for parallel installability. +# Not used in: +# - po/Makevars +# - the docs/reference/gtksourceview-3.0-sections.txt filename +# - the gtksourceview/ directory and sub-directories, because make variables +# need to be transformed (3.0 -> 3_0), and it doesn't work if two different +# variables are used (it must be the same variable). With GSV_API_VERSION +# defined to a single digit (4 instead of 4.0), then it would work. +# Because as far as I've tested, it is not easily feasible to not hardcode the +# API version in those places (swilmet). +GSV_API_VERSION=3.0 +GSV_MAJOR_API_VERSION=3 +AC_SUBST(GSV_API_VERSION) +AC_SUBST(GSV_MAJOR_API_VERSION) + +# Dependencies +glib_req=2.48 +gtk_req=3.20 +libxml_req=2.6 +gladeui_req=3.9 + +AC_CONFIG_SRCDIR([gtksourceview/gtksourcebuffer.h]) +AC_CONFIG_HEADER([config.h]) +AC_CONFIG_MACRO_DIR([m4]) + +# gnu strictness to generate the INSTALL file +AM_INIT_AUTOMAKE([1.13 tar-ustar dist-xz no-dist-gzip -Wno-portability gnu]) +AM_MAINTAINER_MODE([enable]) + +m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) + +# Check for programs +AC_PROG_CC +AC_PROG_INSTALL + +AX_REQUIRE_DEFINED([PKG_PROG_PKG_CONFIG]) +AX_REQUIRE_DEFINED([PKG_INSTALLDIR]) +PKG_PROG_PKG_CONFIG +PKG_INSTALLDIR + +# Initialize libtool +LT_PREREQ([2.2.6]) +LT_INIT([disable-static]) + +# Check for header files +AC_CHECK_HEADERS([unistd.h]) + +# Pull glib-mkenums & co. +AC_PATH_PROG(GLIB_MKENUMS, glib-mkenums) +AC_PATH_PROG(GLIB_COMPILE_RESOURCES, glib-compile-resources) +AC_PATH_PROG(ITSTOOL, itstool) + +# Compile warnings +AX_REQUIRE_DEFINED([AX_COMPILER_FLAGS]) +AX_COMPILER_FLAGS([WARN_CFLAGS], [WARN_LDFLAGS]) + +AC_ARG_ENABLE(deprecations, + [AS_HELP_STRING([--disable-deprecations], + [remove deprecated symbols from the header files])], + [enable_deprecations=$enableval], + [enable_deprecations="yes"]) + +if test "$enable_deprecations" = "no"; then + DISABLE_DEPRECATED_CFLAGS="\ +-DG_DISABLE_DEPRECATED \ +-DGDK_DISABLE_DEPRECATED \ +-DGTK_DISABLE_DEPRECATED \ +-DGDK_PIXBUF_DISABLE_DEPRECATED" + + AC_SUBST(DISABLE_DEPRECATED_CFLAGS) +fi + +# Symbol visibility handling +HIDDEN_VISIBILITY_CFLAGS="" +case "$host" in + *-*-mingw*) + dnl on mingw32 we do -fvisibility=hidden and __declspec(dllexport) + AC_DEFINE([_GTK_SOURCE_EXTERN], [__attribute__((visibility("default"))) __declspec(dllexport) extern], + [defines how to decorate public symbols while building]) + HIDDEN_VISIBILITY_CFLAGS="-fvisibility=hidden" + ;; + *) + dnl on other compilers, check if we can do -fvisibility=hidden + SAVED_CFLAGS="${CFLAGS}" + CFLAGS="-fvisibility=hidden" + AC_MSG_CHECKING([for -fvisibility=hidden compiler flag]) + AC_TRY_COMPILE([], [return 0], + AC_MSG_RESULT(yes) + enable_fvisibility_hidden=yes, + AC_MSG_RESULT(no) + enable_fvisibility_hidden=no) + CFLAGS="${SAVED_CFLAGS}" + + AS_IF([test "${enable_fvisibility_hidden}" = "yes"], [ + AC_DEFINE([_GTK_SOURCE_EXTERN], [__attribute__((visibility("default"))) extern], + [defines how to decorate public symbols while building]) + HIDDEN_VISIBILITY_CFLAGS="-fvisibility=hidden" + ]) + ;; +esac +AC_SUBST(HIDDEN_VISIBILITY_CFLAGS) + +AX_REQUIRE_DEFINED([AX_PKG_CHECK_MODULES]) +AX_PKG_CHECK_MODULES([DEP], + [glib-2.0 >= $glib_req gio-2.0 >= $glib_req gtk+-3.0 >= $gtk_req], + [libxml-2.0 >= $libxml_req]) + +dnl check for native osx +AC_MSG_CHECKING([for native Mac OS X]) +AX_REQUIRE_DEFINED([GTK_CHECK_BACKEND]) +GTK_CHECK_BACKEND([quartz], [3.0.0], [os_osx=yes], [os_osx=no]) +AC_MSG_RESULT([$os_osx]) +AM_CONDITIONAL([OS_OSX], [ test "$os_osx" = "yes" ]) + +if test "$os_osx" = "yes"; then + AC_DEFINE([OS_OSX], [1], [Defined if os is Mac OSX]) +fi + +# Check for Glade3 +AC_ARG_ENABLE([glade-catalog], + [AS_HELP_STRING([--enable-glade-catalog], + [Install a glade catalog file [default=no]])], + [glade_catalog=$enableval], + [glade_catalog=no]) + +AM_CONDITIONAL([GLADE_CATALOG], [ test "$glade_catalog" = "yes" ]) + +AS_IF([ test "$glade_catalog" = "yes" ], + [PKG_CHECK_MODULES(GLADE, [gladeui-2.0 >= $gladeui_req]) + AC_MSG_CHECKING([whether to install Glade catalog]) + GLADE_CATALOG_DIR=`$PKG_CONFIG --variable=catalogdir gladeui-2.0 2>&AS_MESSAGE_LOG_FD` + AC_MSG_RESULT([$GLADE_CATALOG_DIR]) + AC_SUBST(GLADE_CATALOG_DIR)]) + +# i18n +AM_GNU_GETTEXT([external]) +AM_GNU_GETTEXT_VERSION([0.19.4]) + +AS_IF([test "$USE_NLS" = "yes"], + [AC_DEFINE([ENABLE_NLS], [1], [Defined if native language support should be enabled.])]) + +AC_SUBST([GETTEXT_PACKAGE], [gtksourceview-$GSV_API_VERSION]) +AC_DEFINE_UNQUOTED([GETTEXT_PACKAGE], ["$GETTEXT_PACKAGE"], [Define to the gettext package name.]) + +# Documentation +AX_REQUIRE_DEFINED([GTK_DOC_CHECK]) +GTK_DOC_CHECK([1.25], [--flavour=no-tmpl]) + +# Installed Tests for gnome continuous integration +AC_ARG_ENABLE(installed_tests, + AS_HELP_STRING([--enable-installed-tests], + [Install test programs (default: no)]),, + [enable_installed_tests=no]) + +AM_CONDITIONAL(INSTALLED_TESTS, test "x$enable_installed_tests" = "xyes") + +# Introspection +AX_REQUIRE_DEFINED([GOBJECT_INTROSPECTION_CHECK]) +GOBJECT_INTROSPECTION_CHECK([1.42.0]) + +# Code coverage +AX_REQUIRE_DEFINED([AX_CODE_COVERAGE]) +AX_CODE_COVERAGE() + +# Valgrind check +AX_REQUIRE_DEFINED([AX_VALGRIND_CHECK]) +AX_VALGRIND_CHECK + +# Vala +AX_REQUIRE_DEFINED([VAPIGEN_CHECK]) +VAPIGEN_CHECK + +# test-widget uses this to find lang files and gtksourcebuffer.c +ABS_TOP_SRCDIR=`cd $srcdir && pwd` +AC_SUBST(ABS_TOP_SRCDIR) + +# Check whether MSVC toolset is explicitly set + +AM_CONDITIONAL(MSVC_BASE_NO_TOOLSET_SET, [test x$MSVC_BASE_TOOLSET = x]) +AM_CONDITIONAL(MSVC_NO_TOOLSET_SET, [test x$MSVC_TOOLSET = x]) + +# Output files +AC_CONFIG_FILES([ +gtksourceview-${GSV_API_VERSION}.pc:gtksourceview.pc.in +Makefile +config.h.win32 +win32/Makefile +win32/vs9/Makefile +win32/vs9/gtksourceview-version-paths.vsprops +win32/vs10/Makefile +win32/vs10/gtksourceview-version-paths.props +win32/vs11/Makefile +win32/vs12/Makefile +win32/vs14/Makefile +win32/vs15/Makefile +data/Makefile +data/glade/Makefile +data/glade/gtksourceview.xml +data/language-specs/Makefile +data/styles/Makefile +docs/Makefile +docs/reference/Makefile +docs/reference/gtksourceview-docs.xml +docs/reference/intro.xml +docs/reference/lang-reference.xml +docs/reference/style-reference.xml +gtksourceview/Makefile +gtksourceview/gtksourceversion.h +gtksourceview/GtkSource-${GSV_API_VERSION}.metadata:gtksourceview/GtkSource.metadata.in +gtksourceview/completion-providers/Makefile +gtksourceview/completion-providers/words/Makefile +po/Makefile.in +tests/Makefile +testsuite/Makefile +]) + +AC_OUTPUT + + +echo " + +Configuration: + + Source code location: ${srcdir} + Compiler: ${CC} + Glade Catalog: ${glade_catalog} + Documentation: ${enable_gtk_doc} + GObject introspection: ${found_introspection} + Vala: ${enable_vala} + Code coverage: ${enable_code_coverage} + Valgrind check: ${enable_valgrind} + Installed tests: ${enable_installed_tests} +" diff --git a/data/Makefile.am b/data/Makefile.am new file mode 100644 index 0000000..d48ae4a --- /dev/null +++ b/data/Makefile.am @@ -0,0 +1,7 @@ +SUBDIRS = language-specs styles + +if GLADE_CATALOG +SUBDIRS += glade +endif + +-include $(top_srcdir)/git.mk diff --git a/data/Makefile.in b/data/Makefile.in new file mode 100644 index 0000000..f2cf890 --- /dev/null +++ b/data/Makefile.in @@ -0,0 +1,753 @@ +# Makefile.in generated by automake 1.15.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2017 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +@GLADE_CATALOG_TRUE@am__append_1 = glade +subdir = data +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_append_compile_flags.m4 \ + $(top_srcdir)/m4/ax_append_flag.m4 \ + $(top_srcdir)/m4/ax_append_link_flags.m4 \ + $(top_srcdir)/m4/ax_check_compile_flag.m4 \ + $(top_srcdir)/m4/ax_check_link_flag.m4 \ + $(top_srcdir)/m4/ax_code_coverage.m4 \ + $(top_srcdir)/m4/ax_compiler_flags.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_cflags.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_gir.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_ldflags.m4 \ + $(top_srcdir)/m4/ax_is_release.m4 \ + $(top_srcdir)/m4/ax_pkg_check_modules.m4 \ + $(top_srcdir)/m4/ax_require_defined.m4 \ + $(top_srcdir)/m4/ax_valgrind_check.m4 \ + $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-3.0.m4 \ + $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/iconv.m4 \ + $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \ + $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ + $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/vapigen.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + distdir +am__extra_recursive_targets = check-valgrind-recursive \ + check-valgrind-memcheck-recursive \ + check-valgrind-helgrind-recursive check-valgrind-drd-recursive \ + check-valgrind-sgcheck-recursive +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = language-specs styles glade +am__DIST_COMMON = $(srcdir)/Makefile.in +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +ABS_TOP_SRCDIR = @ABS_TOP_SRCDIR@ +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +AX_PACKAGE_REQUIRES = @AX_PACKAGE_REQUIRES@ +AX_PACKAGE_REQUIRES_PRIVATE = @AX_PACKAGE_REQUIRES_PRIVATE@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ +CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ +CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ +CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ +CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ +CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DEP_CFLAGS = @DEP_CFLAGS@ +DEP_LIBS = @DEP_LIBS@ +DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@ +ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@ +ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@ +ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GCOV = @GCOV@ +GENHTML = @GENHTML@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +GLADE_CATALOG_DIR = @GLADE_CATALOG_DIR@ +GLADE_CFLAGS = @GLADE_CFLAGS@ +GLADE_LIBS = @GLADE_LIBS@ +GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ +GLIB_MKENUMS = @GLIB_MKENUMS@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +GSV_API_VERSION = @GSV_API_VERSION@ +GSV_LT_VERSION = @GSV_LT_VERSION@ +GSV_MAJOR_API_VERSION = @GSV_MAJOR_API_VERSION@ +GTKDOC_CHECK = @GTKDOC_CHECK@ +GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ +GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ +GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ +GTKDOC_MKPDF = @GTKDOC_MKPDF@ +GTKDOC_REBASE = @GTKDOC_REBASE@ +GTK_SOURCE_MAJOR_VERSION = @GTK_SOURCE_MAJOR_VERSION@ +GTK_SOURCE_MICRO_VERSION = @GTK_SOURCE_MICRO_VERSION@ +GTK_SOURCE_MINOR_VERSION = @GTK_SOURCE_MINOR_VERSION@ +HIDDEN_VISIBILITY_CFLAGS = @HIDDEN_VISIBILITY_CFLAGS@ +HTML_DIR = @HTML_DIR@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ +INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ +INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ +INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ +INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ +INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ +INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ +INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ +ITSTOOL = @ITSTOOL@ +LCOV = @LCOV@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VALGRIND = @VALGRIND@ +VALGRIND_ENABLED = @VALGRIND_ENABLED@ +VAPIGEN = @VAPIGEN@ +VAPIGEN_MAKEFILE = @VAPIGEN_MAKEFILE@ +VAPIGEN_VAPIDIR = @VAPIGEN_VAPIDIR@ +VERSION = @VERSION@ +WARN_CFLAGS = @WARN_CFLAGS@ +WARN_LDFLAGS = @WARN_LDFLAGS@ +WARN_SCANNERFLAGS = @WARN_SCANNERFLAGS@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +pkgconfigdir = @pkgconfigdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +valgrind_enabled_tools = @valgrind_enabled_tools@ +valgrind_tools = @valgrind_tools@ +SUBDIRS = language-specs styles $(am__append_1) +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu data/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu data/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" +check-valgrind-local: +check-valgrind-memcheck-local: +check-valgrind-helgrind-local: +check-valgrind-drd-local: +check-valgrind-sgcheck-local: + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +check-valgrind: check-valgrind-recursive + +check-valgrind-am: check-valgrind-local + +check-valgrind-drd: check-valgrind-drd-recursive + +check-valgrind-drd-am: check-valgrind-drd-local + +check-valgrind-helgrind: check-valgrind-helgrind-recursive + +check-valgrind-helgrind-am: check-valgrind-helgrind-local + +check-valgrind-memcheck: check-valgrind-memcheck-recursive + +check-valgrind-memcheck-am: check-valgrind-memcheck-local + +check-valgrind-sgcheck: check-valgrind-sgcheck-recursive + +check-valgrind-sgcheck-am: check-valgrind-sgcheck-local + +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(am__recursive_targets) install-am install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ + check-am check-valgrind-am check-valgrind-drd-am \ + check-valgrind-drd-local check-valgrind-helgrind-am \ + check-valgrind-helgrind-local check-valgrind-local \ + check-valgrind-memcheck-am check-valgrind-memcheck-local \ + check-valgrind-sgcheck-am check-valgrind-sgcheck-local clean \ + clean-generic clean-libtool cscopelist-am ctags ctags-am \ + distclean distclean-generic distclean-libtool distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-am uninstall uninstall-am + +.PRECIOUS: Makefile + + +-include $(top_srcdir)/git.mk + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/data/glade/Makefile.am b/data/glade/Makefile.am new file mode 100644 index 0000000..20ed221 --- /dev/null +++ b/data/glade/Makefile.am @@ -0,0 +1,20 @@ +# Note that we do not install in the detected GLADE_CATALOG_DIR +# since we may not have permissions to do it, for instance if +# compiling with a prefix while glade is installed in /usr. +# We use the variable only to find the dtd file. +# If you install gtksourceview and glade in different prefixes +# and want to use the catalog in glade, you will need to set +# the GLADE_CATALOG_SEARCH_PATH environment variable. +catalogdir = $(datadir)/glade/catalogs +catalog_DATA = gtksourceview.xml + +validate: $(catalog_DATA) + xmllint --dtdvalid $(GLADE_CATALOG_DIR)/glade-catalog.dtd --noout $< + +EXTRA_DIST = \ + gtksourceview.xml.in \ + glade.its \ + glade.pot \ + update-pot.sh + +-include $(top_srcdir)/git.mk diff --git a/data/glade/Makefile.in b/data/glade/Makefile.in new file mode 100644 index 0000000..9266ddb --- /dev/null +++ b/data/glade/Makefile.in @@ -0,0 +1,647 @@ +# Makefile.in generated by automake 1.15.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2017 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = data/glade +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_append_compile_flags.m4 \ + $(top_srcdir)/m4/ax_append_flag.m4 \ + $(top_srcdir)/m4/ax_append_link_flags.m4 \ + $(top_srcdir)/m4/ax_check_compile_flag.m4 \ + $(top_srcdir)/m4/ax_check_link_flag.m4 \ + $(top_srcdir)/m4/ax_code_coverage.m4 \ + $(top_srcdir)/m4/ax_compiler_flags.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_cflags.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_gir.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_ldflags.m4 \ + $(top_srcdir)/m4/ax_is_release.m4 \ + $(top_srcdir)/m4/ax_pkg_check_modules.m4 \ + $(top_srcdir)/m4/ax_require_defined.m4 \ + $(top_srcdir)/m4/ax_valgrind_check.m4 \ + $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-3.0.m4 \ + $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/iconv.m4 \ + $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \ + $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ + $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/vapigen.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = gtksourceview.xml +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(catalogdir)" +DATA = $(catalog_DATA) +am__extra_recursive_targets = check-valgrind-recursive \ + check-valgrind-memcheck-recursive \ + check-valgrind-helgrind-recursive check-valgrind-drd-recursive \ + check-valgrind-sgcheck-recursive +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/gtksourceview.xml.in +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ABS_TOP_SRCDIR = @ABS_TOP_SRCDIR@ +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +AX_PACKAGE_REQUIRES = @AX_PACKAGE_REQUIRES@ +AX_PACKAGE_REQUIRES_PRIVATE = @AX_PACKAGE_REQUIRES_PRIVATE@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ +CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ +CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ +CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ +CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ +CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DEP_CFLAGS = @DEP_CFLAGS@ +DEP_LIBS = @DEP_LIBS@ +DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@ +ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@ +ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@ +ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GCOV = @GCOV@ +GENHTML = @GENHTML@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +GLADE_CATALOG_DIR = @GLADE_CATALOG_DIR@ +GLADE_CFLAGS = @GLADE_CFLAGS@ +GLADE_LIBS = @GLADE_LIBS@ +GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ +GLIB_MKENUMS = @GLIB_MKENUMS@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +GSV_API_VERSION = @GSV_API_VERSION@ +GSV_LT_VERSION = @GSV_LT_VERSION@ +GSV_MAJOR_API_VERSION = @GSV_MAJOR_API_VERSION@ +GTKDOC_CHECK = @GTKDOC_CHECK@ +GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ +GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ +GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ +GTKDOC_MKPDF = @GTKDOC_MKPDF@ +GTKDOC_REBASE = @GTKDOC_REBASE@ +GTK_SOURCE_MAJOR_VERSION = @GTK_SOURCE_MAJOR_VERSION@ +GTK_SOURCE_MICRO_VERSION = @GTK_SOURCE_MICRO_VERSION@ +GTK_SOURCE_MINOR_VERSION = @GTK_SOURCE_MINOR_VERSION@ +HIDDEN_VISIBILITY_CFLAGS = @HIDDEN_VISIBILITY_CFLAGS@ +HTML_DIR = @HTML_DIR@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ +INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ +INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ +INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ +INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ +INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ +INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ +INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ +ITSTOOL = @ITSTOOL@ +LCOV = @LCOV@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VALGRIND = @VALGRIND@ +VALGRIND_ENABLED = @VALGRIND_ENABLED@ +VAPIGEN = @VAPIGEN@ +VAPIGEN_MAKEFILE = @VAPIGEN_MAKEFILE@ +VAPIGEN_VAPIDIR = @VAPIGEN_VAPIDIR@ +VERSION = @VERSION@ +WARN_CFLAGS = @WARN_CFLAGS@ +WARN_LDFLAGS = @WARN_LDFLAGS@ +WARN_SCANNERFLAGS = @WARN_SCANNERFLAGS@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +pkgconfigdir = @pkgconfigdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +valgrind_enabled_tools = @valgrind_enabled_tools@ +valgrind_tools = @valgrind_tools@ + +# Note that we do not install in the detected GLADE_CATALOG_DIR +# since we may not have permissions to do it, for instance if +# compiling with a prefix while glade is installed in /usr. +# We use the variable only to find the dtd file. +# If you install gtksourceview and glade in different prefixes +# and want to use the catalog in glade, you will need to set +# the GLADE_CATALOG_SEARCH_PATH environment variable. +catalogdir = $(datadir)/glade/catalogs +catalog_DATA = gtksourceview.xml +EXTRA_DIST = \ + gtksourceview.xml.in \ + glade.its \ + glade.pot \ + update-pot.sh + +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu data/glade/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu data/glade/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +gtksourceview.xml: $(top_builddir)/config.status $(srcdir)/gtksourceview.xml.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-catalogDATA: $(catalog_DATA) + @$(NORMAL_INSTALL) + @list='$(catalog_DATA)'; test -n "$(catalogdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(catalogdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(catalogdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(catalogdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(catalogdir)" || exit $$?; \ + done + +uninstall-catalogDATA: + @$(NORMAL_UNINSTALL) + @list='$(catalog_DATA)'; test -n "$(catalogdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(catalogdir)'; $(am__uninstall_files_from_dir) +check-valgrind-local: +check-valgrind-memcheck-local: +check-valgrind-helgrind-local: +check-valgrind-drd-local: +check-valgrind-sgcheck-local: +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) +installdirs: + for dir in "$(DESTDIR)$(catalogdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +check-valgrind: check-valgrind-am + +check-valgrind-am: check-valgrind-local + +check-valgrind-drd: check-valgrind-drd-am + +check-valgrind-drd-am: check-valgrind-drd-local + +check-valgrind-helgrind: check-valgrind-helgrind-am + +check-valgrind-helgrind-am: check-valgrind-helgrind-local + +check-valgrind-memcheck: check-valgrind-memcheck-am + +check-valgrind-memcheck-am: check-valgrind-memcheck-local + +check-valgrind-sgcheck: check-valgrind-sgcheck-am + +check-valgrind-sgcheck-am: check-valgrind-sgcheck-local + +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-catalogDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-catalogDATA + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am check-valgrind-am \ + check-valgrind-drd-am check-valgrind-drd-local \ + check-valgrind-helgrind-am check-valgrind-helgrind-local \ + check-valgrind-local check-valgrind-memcheck-am \ + check-valgrind-memcheck-local check-valgrind-sgcheck-am \ + check-valgrind-sgcheck-local clean clean-generic clean-libtool \ + cscopelist-am ctags-am distclean distclean-generic \ + distclean-libtool distdir dvi dvi-am html html-am info info-am \ + install install-am install-catalogDATA install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ + uninstall-am uninstall-catalogDATA + +.PRECIOUS: Makefile + + +validate: $(catalog_DATA) + xmllint --dtdvalid $(GLADE_CATALOG_DIR)/glade-catalog.dtd --noout $< + +-include $(top_srcdir)/git.mk + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/data/glade/glade.its b/data/glade/glade.its new file mode 100644 index 0000000..082400a --- /dev/null +++ b/data/glade/glade.its @@ -0,0 +1,7 @@ + + + + + diff --git a/data/glade/glade.pot b/data/glade/glade.pot new file mode 100644 index 0000000..bfcccdf --- /dev/null +++ b/data/glade/glade.pot @@ -0,0 +1,71 @@ +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"POT-Creation-Date: 2015-10-03 15:09+0200\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME \n" +"Language-Team: LANGUAGE \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. (itstool) path: displayable-values/value@name +#: gtksourceview.xml:23 +msgid "Disabled" +msgstr "" + +#. (itstool) path: displayable-values/value@name +#: gtksourceview.xml:24 +msgid "Before" +msgstr "" + +#. (itstool) path: displayable-values/value@name +#: gtksourceview.xml:25 +msgid "After" +msgstr "" + +#. (itstool) path: displayable-values/value@name +#: gtksourceview.xml:26 +msgid "Always" +msgstr "" + +#. (itstool) path: displayable-values/value@name +#: gtksourceview.xml:32 +msgid "Space" +msgstr "" + +#. (itstool) path: displayable-values/value@name +#: gtksourceview.xml:33 +msgid "Tab" +msgstr "" + +#. (itstool) path: displayable-values/value@name +#: gtksourceview.xml:34 +msgid "Newline" +msgstr "" + +#. (itstool) path: displayable-values/value@name +#: gtksourceview.xml:35 +msgid "Non Breaking Whitespace" +msgstr "" + +#. (itstool) path: displayable-values/value@name +#: gtksourceview.xml:36 +msgid "Leading" +msgstr "" + +#. (itstool) path: displayable-values/value@name +#: gtksourceview.xml:37 +msgid "Text" +msgstr "" + +#. (itstool) path: displayable-values/value@name +#: gtksourceview.xml:38 +msgid "Trailing" +msgstr "" + +#. (itstool) path: displayable-values/value@name +#: gtksourceview.xml:39 +msgid "All" +msgstr "" + diff --git a/data/glade/gtksourceview.xml.in b/data/glade/gtksourceview.xml.in new file mode 100644 index 0000000..4c7a69f --- /dev/null +++ b/data/glade/gtksourceview.xml.in @@ -0,0 +1,58 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/data/glade/update-pot.sh b/data/glade/update-pot.sh new file mode 100755 index 0000000..ca30049 --- /dev/null +++ b/data/glade/update-pot.sh @@ -0,0 +1,3 @@ +#!/bin/sh + +itstool -i glade.its -o glade.pot gtksourceview.xml diff --git a/data/language-specs/Makefile.am b/data/language-specs/Makefile.am new file mode 100644 index 0000000..a4218f3 --- /dev/null +++ b/data/language-specs/Makefile.am @@ -0,0 +1,148 @@ +TESTS = check-language.sh + +LANGUAGES = \ + abnf.lang \ + actionscript.lang \ + ada.lang \ + ansforth94.lang \ + asp.lang \ + automake.lang \ + awk.lang \ + bennugd.lang \ + bibtex.lang \ + bluespec.lang \ + boo.lang \ + cg.lang \ + changelog.lang \ + chdr.lang \ + c.lang \ + cmake.lang \ + cobol.lang \ + cpphdr.lang \ + cpp.lang \ + csharp.lang \ + css.lang \ + csv.lang \ + cuda.lang \ + def.lang \ + desktop.lang \ + diff.lang \ + d.lang \ + docbook.lang \ + dosbatch.lang \ + dot.lang \ + dpatch.lang \ + dtd.lang \ + dtl.lang \ + eiffel.lang \ + erlang.lang \ + fcl.lang \ + forth.lang \ + fortran.lang \ + fsharp.lang \ + gap.lang \ + gdb-log.lang \ + genie.lang \ + glsl.lang \ + go.lang \ + groovy.lang \ + gtk-doc.lang \ + gtkrc.lang \ + haddock.lang \ + haskell.lang \ + haskell-literate.lang \ + haxe.lang \ + html.lang \ + idl-exelis.lang \ + idl.lang \ + imagej.lang \ + ini.lang \ + jade.lang \ + java.lang \ + javascript.lang \ + j.lang \ + json.lang \ + julia.lang \ + kotlin.lang \ + latex.lang \ + less.lang \ + lex.lang \ + libtool.lang \ + llvm.lang \ + logcat.lang \ + logtalk.lang \ + lua.lang \ + m4.lang \ + makefile.lang \ + mallard.lang \ + markdown.lang \ + matlab.lang \ + maxima.lang \ + mediawiki.lang \ + meson.lang \ + modelica.lang \ + mxml.lang \ + nemerle.lang \ + netrexx.lang \ + nsis.lang \ + objc.lang \ + objj.lang \ + ocaml.lang \ + ocl.lang \ + octave.lang \ + ooc.lang \ + opal.lang \ + opencl.lang \ + pascal.lang \ + perl.lang \ + php.lang \ + pig.lang \ + pkgconfig.lang \ + po.lang \ + prolog.lang \ + protobuf.lang \ + puppet.lang \ + python3.lang \ + python.lang \ + R.lang \ + rpmspec.lang \ + rst.lang \ + ruby.lang \ + rust.lang \ + scala.lang \ + scheme.lang \ + scilab.lang \ + scss.lang \ + sh.lang \ + sml.lang \ + sparql.lang \ + sql.lang \ + sweave.lang \ + swift.lang \ + systemverilog.lang \ + t2t.lang \ + tcl.lang \ + tera.lang \ + texinfo.lang \ + thrift.lang \ + toml.lang \ + vala.lang \ + vbnet.lang \ + verilog.lang \ + vhdl.lang \ + xml.lang \ + xslt.lang \ + yacc.lang \ + yaml.lang + +languagesdir = $(datadir)/gtksourceview-@GSV_API_VERSION@/language-specs +languages_DATA = $(LANGUAGES) language.rng language2.rng language.dtd + +EXTRA_DIST = \ + $(languages_DATA) \ + check-language.sh \ + language-specs.its \ + language-specs.pot \ + update-pot.sh + +-include $(top_srcdir)/git.mk diff --git a/data/language-specs/Makefile.in b/data/language-specs/Makefile.in new file mode 100644 index 0000000..8f720c4 --- /dev/null +++ b/data/language-specs/Makefile.in @@ -0,0 +1,1116 @@ +# Makefile.in generated by automake 1.15.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2017 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = data/language-specs +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_append_compile_flags.m4 \ + $(top_srcdir)/m4/ax_append_flag.m4 \ + $(top_srcdir)/m4/ax_append_link_flags.m4 \ + $(top_srcdir)/m4/ax_check_compile_flag.m4 \ + $(top_srcdir)/m4/ax_check_link_flag.m4 \ + $(top_srcdir)/m4/ax_code_coverage.m4 \ + $(top_srcdir)/m4/ax_compiler_flags.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_cflags.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_gir.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_ldflags.m4 \ + $(top_srcdir)/m4/ax_is_release.m4 \ + $(top_srcdir)/m4/ax_pkg_check_modules.m4 \ + $(top_srcdir)/m4/ax_require_defined.m4 \ + $(top_srcdir)/m4/ax_valgrind_check.m4 \ + $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-3.0.m4 \ + $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/iconv.m4 \ + $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \ + $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ + $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/vapigen.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(languagesdir)" +DATA = $(languages_DATA) +am__extra_recursive_targets = check-valgrind-recursive \ + check-valgrind-memcheck-recursive \ + check-valgrind-helgrind-recursive check-valgrind-drd-recursive \ + check-valgrind-sgcheck-recursive +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__tty_colors_dummy = \ + mgn= red= grn= lgn= blu= brg= std=; \ + am__color_tests=no +am__tty_colors = { \ + $(am__tty_colors_dummy); \ + if test "X$(AM_COLOR_TESTS)" = Xno; then \ + am__color_tests=no; \ + elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ + am__color_tests=yes; \ + elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ + am__color_tests=yes; \ + fi; \ + if test $$am__color_tests = yes; then \ + red=''; \ + grn=''; \ + lgn=''; \ + blu=''; \ + mgn=''; \ + brg=''; \ + std=''; \ + fi; \ +} +am__recheck_rx = ^[ ]*:recheck:[ ]* +am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* +am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* +# A command that, given a newline-separated list of test names on the +# standard input, print the name of the tests that are to be re-run +# upon "make recheck". +am__list_recheck_tests = $(AWK) '{ \ + recheck = 1; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + { \ + if ((getline line2 < ($$0 ".log")) < 0) \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ + { \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ + { \ + break; \ + } \ + }; \ + if (recheck) \ + print $$0; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# A command that, given a newline-separated list of test names on the +# standard input, create the global log from their .trs and .log files. +am__create_global_log = $(AWK) ' \ +function fatal(msg) \ +{ \ + print "fatal: making $@: " msg | "cat >&2"; \ + exit 1; \ +} \ +function rst_section(header) \ +{ \ + print header; \ + len = length(header); \ + for (i = 1; i <= len; i = i + 1) \ + printf "="; \ + printf "\n\n"; \ +} \ +{ \ + copy_in_global_log = 1; \ + global_test_result = "RUN"; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".trs"); \ + if (line ~ /$(am__global_test_result_rx)/) \ + { \ + sub("$(am__global_test_result_rx)", "", line); \ + sub("[ ]*$$", "", line); \ + global_test_result = line; \ + } \ + else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ + copy_in_global_log = 0; \ + }; \ + if (copy_in_global_log) \ + { \ + rst_section(global_test_result ": " $$0); \ + while ((rc = (getline line < ($$0 ".log"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".log"); \ + print line; \ + }; \ + printf "\n"; \ + }; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# Restructured Text title. +am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } +# Solaris 10 'make', and several other traditional 'make' implementations, +# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it +# by disabling -e (using the XSI extension "set +e") if it's set. +am__sh_e_setup = case $$- in *e*) set +e;; esac +# Default flags passed to test drivers. +am__common_driver_flags = \ + --color-tests "$$am__color_tests" \ + --enable-hard-errors "$$am__enable_hard_errors" \ + --expect-failure "$$am__expect_failure" +# To be inserted before the command running the test. Creates the +# directory for the log if needed. Stores in $dir the directory +# containing $f, in $tst the test, in $log the log. Executes the +# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and +# passes TESTS_ENVIRONMENT. Set up options for the wrapper that +# will run the test scripts (or their associated LOG_COMPILER, if +# thy have one). +am__check_pre = \ +$(am__sh_e_setup); \ +$(am__vpath_adj_setup) $(am__vpath_adj) \ +$(am__tty_colors); \ +srcdir=$(srcdir); export srcdir; \ +case "$@" in \ + */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ + *) am__odir=.;; \ +esac; \ +test "x$$am__odir" = x"." || test -d "$$am__odir" \ + || $(MKDIR_P) "$$am__odir" || exit $$?; \ +if test -f "./$$f"; then dir=./; \ +elif test -f "$$f"; then dir=; \ +else dir="$(srcdir)/"; fi; \ +tst=$$dir$$f; log='$@'; \ +if test -n '$(DISABLE_HARD_ERRORS)'; then \ + am__enable_hard_errors=no; \ +else \ + am__enable_hard_errors=yes; \ +fi; \ +case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ + am__expect_failure=yes;; \ + *) \ + am__expect_failure=no;; \ +esac; \ +$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) +# A shell command to get the names of the tests scripts with any registered +# extension removed (i.e., equivalently, the names of the test logs, with +# the '.log' extension removed). The result is saved in the shell variable +# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, +# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", +# since that might cause problem with VPATH rewrites for suffix-less tests. +# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. +am__set_TESTS_bases = \ + bases='$(TEST_LOGS)'; \ + bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ + bases=`echo $$bases` +RECHECK_LOGS = $(TEST_LOGS) +AM_RECURSIVE_TARGETS = check recheck +TEST_SUITE_LOG = test-suite.log +TEST_EXTENSIONS = @EXEEXT@ .test +LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver +LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) +am__set_b = \ + case '$@' in \ + */*) \ + case '$*' in \ + */*) b='$*';; \ + *) b=`echo '$@' | sed 's/\.log$$//'`; \ + esac;; \ + *) \ + b='$*';; \ + esac +am__test_logs1 = $(TESTS:=.log) +am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) +TEST_LOGS = $(am__test_logs2:.test.log=.log) +TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver +TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ + $(TEST_LOG_FLAGS) +am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/test-driver +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ABS_TOP_SRCDIR = @ABS_TOP_SRCDIR@ +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +AX_PACKAGE_REQUIRES = @AX_PACKAGE_REQUIRES@ +AX_PACKAGE_REQUIRES_PRIVATE = @AX_PACKAGE_REQUIRES_PRIVATE@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ +CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ +CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ +CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ +CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ +CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DEP_CFLAGS = @DEP_CFLAGS@ +DEP_LIBS = @DEP_LIBS@ +DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@ +ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@ +ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@ +ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GCOV = @GCOV@ +GENHTML = @GENHTML@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +GLADE_CATALOG_DIR = @GLADE_CATALOG_DIR@ +GLADE_CFLAGS = @GLADE_CFLAGS@ +GLADE_LIBS = @GLADE_LIBS@ +GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ +GLIB_MKENUMS = @GLIB_MKENUMS@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +GSV_API_VERSION = @GSV_API_VERSION@ +GSV_LT_VERSION = @GSV_LT_VERSION@ +GSV_MAJOR_API_VERSION = @GSV_MAJOR_API_VERSION@ +GTKDOC_CHECK = @GTKDOC_CHECK@ +GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ +GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ +GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ +GTKDOC_MKPDF = @GTKDOC_MKPDF@ +GTKDOC_REBASE = @GTKDOC_REBASE@ +GTK_SOURCE_MAJOR_VERSION = @GTK_SOURCE_MAJOR_VERSION@ +GTK_SOURCE_MICRO_VERSION = @GTK_SOURCE_MICRO_VERSION@ +GTK_SOURCE_MINOR_VERSION = @GTK_SOURCE_MINOR_VERSION@ +HIDDEN_VISIBILITY_CFLAGS = @HIDDEN_VISIBILITY_CFLAGS@ +HTML_DIR = @HTML_DIR@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ +INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ +INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ +INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ +INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ +INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ +INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ +INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ +ITSTOOL = @ITSTOOL@ +LCOV = @LCOV@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VALGRIND = @VALGRIND@ +VALGRIND_ENABLED = @VALGRIND_ENABLED@ +VAPIGEN = @VAPIGEN@ +VAPIGEN_MAKEFILE = @VAPIGEN_MAKEFILE@ +VAPIGEN_VAPIDIR = @VAPIGEN_VAPIDIR@ +VERSION = @VERSION@ +WARN_CFLAGS = @WARN_CFLAGS@ +WARN_LDFLAGS = @WARN_LDFLAGS@ +WARN_SCANNERFLAGS = @WARN_SCANNERFLAGS@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +pkgconfigdir = @pkgconfigdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +valgrind_enabled_tools = @valgrind_enabled_tools@ +valgrind_tools = @valgrind_tools@ +TESTS = check-language.sh +LANGUAGES = \ + abnf.lang \ + actionscript.lang \ + ada.lang \ + ansforth94.lang \ + asp.lang \ + automake.lang \ + awk.lang \ + bennugd.lang \ + bibtex.lang \ + bluespec.lang \ + boo.lang \ + cg.lang \ + changelog.lang \ + chdr.lang \ + c.lang \ + cmake.lang \ + cobol.lang \ + cpphdr.lang \ + cpp.lang \ + csharp.lang \ + css.lang \ + csv.lang \ + cuda.lang \ + def.lang \ + desktop.lang \ + diff.lang \ + d.lang \ + docbook.lang \ + dosbatch.lang \ + dot.lang \ + dpatch.lang \ + dtd.lang \ + dtl.lang \ + eiffel.lang \ + erlang.lang \ + fcl.lang \ + forth.lang \ + fortran.lang \ + fsharp.lang \ + gap.lang \ + gdb-log.lang \ + genie.lang \ + glsl.lang \ + go.lang \ + groovy.lang \ + gtk-doc.lang \ + gtkrc.lang \ + haddock.lang \ + haskell.lang \ + haskell-literate.lang \ + haxe.lang \ + html.lang \ + idl-exelis.lang \ + idl.lang \ + imagej.lang \ + ini.lang \ + jade.lang \ + java.lang \ + javascript.lang \ + j.lang \ + json.lang \ + julia.lang \ + kotlin.lang \ + latex.lang \ + less.lang \ + lex.lang \ + libtool.lang \ + llvm.lang \ + logcat.lang \ + logtalk.lang \ + lua.lang \ + m4.lang \ + makefile.lang \ + mallard.lang \ + markdown.lang \ + matlab.lang \ + maxima.lang \ + mediawiki.lang \ + meson.lang \ + modelica.lang \ + mxml.lang \ + nemerle.lang \ + netrexx.lang \ + nsis.lang \ + objc.lang \ + objj.lang \ + ocaml.lang \ + ocl.lang \ + octave.lang \ + ooc.lang \ + opal.lang \ + opencl.lang \ + pascal.lang \ + perl.lang \ + php.lang \ + pig.lang \ + pkgconfig.lang \ + po.lang \ + prolog.lang \ + protobuf.lang \ + puppet.lang \ + python3.lang \ + python.lang \ + R.lang \ + rpmspec.lang \ + rst.lang \ + ruby.lang \ + rust.lang \ + scala.lang \ + scheme.lang \ + scilab.lang \ + scss.lang \ + sh.lang \ + sml.lang \ + sparql.lang \ + sql.lang \ + sweave.lang \ + swift.lang \ + systemverilog.lang \ + t2t.lang \ + tcl.lang \ + tera.lang \ + texinfo.lang \ + thrift.lang \ + toml.lang \ + vala.lang \ + vbnet.lang \ + verilog.lang \ + vhdl.lang \ + xml.lang \ + xslt.lang \ + yacc.lang \ + yaml.lang + +languagesdir = $(datadir)/gtksourceview-@GSV_API_VERSION@/language-specs +languages_DATA = $(LANGUAGES) language.rng language2.rng language.dtd +EXTRA_DIST = \ + $(languages_DATA) \ + check-language.sh \ + language-specs.its \ + language-specs.pot \ + update-pot.sh + +all: all-am + +.SUFFIXES: +.SUFFIXES: .log .test .test$(EXEEXT) .trs +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu data/language-specs/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu data/language-specs/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-languagesDATA: $(languages_DATA) + @$(NORMAL_INSTALL) + @list='$(languages_DATA)'; test -n "$(languagesdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(languagesdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(languagesdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(languagesdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(languagesdir)" || exit $$?; \ + done + +uninstall-languagesDATA: + @$(NORMAL_UNINSTALL) + @list='$(languages_DATA)'; test -n "$(languagesdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(languagesdir)'; $(am__uninstall_files_from_dir) +check-valgrind-local: +check-valgrind-memcheck-local: +check-valgrind-helgrind-local: +check-valgrind-drd-local: +check-valgrind-sgcheck-local: +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + + +# Recover from deleted '.trs' file; this should ensure that +# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create +# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells +# to avoid problems with "make -n". +.log.trs: + rm -f $< $@ + $(MAKE) $(AM_MAKEFLAGS) $< + +# Leading 'am--fnord' is there to ensure the list of targets does not +# expand to empty, as could happen e.g. with make check TESTS=''. +am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) +am--force-recheck: + @: + +$(TEST_SUITE_LOG): $(TEST_LOGS) + @$(am__set_TESTS_bases); \ + am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ + redo_bases=`for i in $$bases; do \ + am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ + done`; \ + if test -n "$$redo_bases"; then \ + redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ + redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ + if $(am__make_dryrun); then :; else \ + rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ + fi; \ + fi; \ + if test -n "$$am__remaking_logs"; then \ + echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ + "recursion detected" >&2; \ + elif test -n "$$redo_logs"; then \ + am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ + fi; \ + if $(am__make_dryrun); then :; else \ + st=0; \ + errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ + for i in $$redo_bases; do \ + test -f $$i.trs && test -r $$i.trs \ + || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ + test -f $$i.log && test -r $$i.log \ + || { echo "$$errmsg $$i.log" >&2; st=1; }; \ + done; \ + test $$st -eq 0 || exit 1; \ + fi + @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ + ws='[ ]'; \ + results=`for b in $$bases; do echo $$b.trs; done`; \ + test -n "$$results" || results=/dev/null; \ + all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ + pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ + fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ + skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ + xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ + xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ + error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ + if test `expr $$fail + $$xpass + $$error` -eq 0; then \ + success=true; \ + else \ + success=false; \ + fi; \ + br='==================='; br=$$br$$br$$br$$br; \ + result_count () \ + { \ + if test x"$$1" = x"--maybe-color"; then \ + maybe_colorize=yes; \ + elif test x"$$1" = x"--no-color"; then \ + maybe_colorize=no; \ + else \ + echo "$@: invalid 'result_count' usage" >&2; exit 4; \ + fi; \ + shift; \ + desc=$$1 count=$$2; \ + if test $$maybe_colorize = yes && test $$count -gt 0; then \ + color_start=$$3 color_end=$$std; \ + else \ + color_start= color_end=; \ + fi; \ + echo "$${color_start}# $$desc $$count$${color_end}"; \ + }; \ + create_testsuite_report () \ + { \ + result_count $$1 "TOTAL:" $$all "$$brg"; \ + result_count $$1 "PASS: " $$pass "$$grn"; \ + result_count $$1 "SKIP: " $$skip "$$blu"; \ + result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ + result_count $$1 "FAIL: " $$fail "$$red"; \ + result_count $$1 "XPASS:" $$xpass "$$red"; \ + result_count $$1 "ERROR:" $$error "$$mgn"; \ + }; \ + { \ + echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ + $(am__rst_title); \ + create_testsuite_report --no-color; \ + echo; \ + echo ".. contents:: :depth: 2"; \ + echo; \ + for b in $$bases; do echo $$b; done \ + | $(am__create_global_log); \ + } >$(TEST_SUITE_LOG).tmp || exit 1; \ + mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ + if $$success; then \ + col="$$grn"; \ + else \ + col="$$red"; \ + test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ + fi; \ + echo "$${col}$$br$${std}"; \ + echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ + echo "$${col}$$br$${std}"; \ + create_testsuite_report --maybe-color; \ + echo "$$col$$br$$std"; \ + if $$success; then :; else \ + echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ + if test -n "$(PACKAGE_BUGREPORT)"; then \ + echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ + fi; \ + echo "$$col$$br$$std"; \ + fi; \ + $$success || exit 1 + +check-TESTS: + @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list + @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + trs_list=`for i in $$bases; do echo $$i.trs; done`; \ + log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ + exit $$?; +recheck: all + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + bases=`for i in $$bases; do echo $$i; done \ + | $(am__list_recheck_tests)` || exit 1; \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + log_list=`echo $$log_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ + am__force_recheck=am--force-recheck \ + TEST_LOGS="$$log_list"; \ + exit $$? +check-language.sh.log: check-language.sh + @p='check-language.sh'; \ + b='check-language.sh'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +.test.log: + @p='$<'; \ + $(am__set_b); \ + $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +@am__EXEEXT_TRUE@.test$(EXEEXT).log: +@am__EXEEXT_TRUE@ @p='$<'; \ +@am__EXEEXT_TRUE@ $(am__set_b); \ +@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ +@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ +@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ +@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: check-am +all-am: Makefile $(DATA) +installdirs: + for dir in "$(DESTDIR)$(languagesdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) + -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) + -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +check-valgrind: check-valgrind-am + +check-valgrind-am: check-valgrind-local + +check-valgrind-drd: check-valgrind-drd-am + +check-valgrind-drd-am: check-valgrind-drd-local + +check-valgrind-helgrind: check-valgrind-helgrind-am + +check-valgrind-helgrind-am: check-valgrind-helgrind-local + +check-valgrind-memcheck: check-valgrind-memcheck-am + +check-valgrind-memcheck-am: check-valgrind-memcheck-local + +check-valgrind-sgcheck: check-valgrind-sgcheck-am + +check-valgrind-sgcheck-am: check-valgrind-sgcheck-local + +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-languagesDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-languagesDATA + +.MAKE: check-am install-am install-strip + +.PHONY: all all-am check check-TESTS check-am check-valgrind-am \ + check-valgrind-drd-am check-valgrind-drd-local \ + check-valgrind-helgrind-am check-valgrind-helgrind-local \ + check-valgrind-local check-valgrind-memcheck-am \ + check-valgrind-memcheck-local check-valgrind-sgcheck-am \ + check-valgrind-sgcheck-local clean clean-generic clean-libtool \ + cscopelist-am ctags-am distclean distclean-generic \ + distclean-libtool distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am \ + install-languagesDATA install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am recheck tags-am \ + uninstall uninstall-am uninstall-languagesDATA + +.PRECIOUS: Makefile + + +-include $(top_srcdir)/git.mk + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/data/language-specs/R.lang b/data/language-specs/R.lang new file mode 100644 index 0000000..a2c1578 --- /dev/null +++ b/data/language-specs/R.lang @@ -0,0 +1,2198 @@ + + + + + + text/x-R + *.R;*.Rout;*.r;*.Rhistory;*.Rt;*.Rout.save;*.Rout.fail + # + + + + + + + Hi there! + + diff --git a/tests/syntax-highlighting/file.hx b/tests/syntax-highlighting/file.hx new file mode 100644 index 0000000..8de2314 --- /dev/null +++ b/tests/syntax-highlighting/file.hx @@ -0,0 +1,20 @@ +/* Multi line comment + * ================== + * line 1 + * line 2 + * */ + +package; + +import flash.display.Sprite; + +class Main extends Sprite +{ + var foo:Int = 400; // single line comment + public static function main():Void + { + @metadata("argument") + @:buildMacro + var boolean:Bool = false; + } +} diff --git a/tests/syntax-highlighting/file.ijm b/tests/syntax-highlighting/file.ijm new file mode 100644 index 0000000..120b3d0 --- /dev/null +++ b/tests/syntax-highlighting/file.ijm @@ -0,0 +1,11 @@ +// line comment +var variable = "string\n with \t escaped\"characters"; +macro "new macro" { + NotGlobalVar = 5 +6; + result = getPixel(0, 0); + run("8-bit"); +} +function NewFunction() { + /* + multiline comment*/ +} diff --git a/tests/syntax-highlighting/file.impl b/tests/syntax-highlighting/file.impl new file mode 100644 index 0000000..088b8f5 --- /dev/null +++ b/tests/syntax-highlighting/file.impl @@ -0,0 +1,11 @@ +-- Opal test +IMPLEMENTATION LeapYear + +IMPORT Nat COMPLETELY + +DEF leapYear(year) == + IF (year % ("400"!) = 0) THEN true + IF (year % ("400"!) |= 0) and (year % 100 = 0) THEN false + IF (year % 100 |= 0) and (year % 4 = 0) THEN true + IF (year % 4 |= 0) THEN false + FI diff --git a/tests/syntax-highlighting/file.ini b/tests/syntax-highlighting/file.ini new file mode 100644 index 0000000..668265e --- /dev/null +++ b/tests/syntax-highlighting/file.ini @@ -0,0 +1,11 @@ +[module] +type=Python +file=simple.py +version=1.0 +[plugin] +id=APlugin +_name=A Plugin +_description=A plugin +author=Some Guy +; this is a plugin version, can be anything +version=3.1415926 diff --git a/tests/syntax-highlighting/file.js b/tests/syntax-highlighting/file.js new file mode 100644 index 0000000..78cf4ef --- /dev/null +++ b/tests/syntax-highlighting/file.js @@ -0,0 +1,27 @@ +// Regular expressions: +/abc/ +x = /abc/; +function_with_regex_arg(/abc/); +[ /abc/, /def/]; +{ regex: /abc/ }; +(1 === 0) ? /abc/ : /def/; +/abc/ /* Comment */ +/abc/ // Comment +var matches = /abc/.exec('Alphabet ... that should contain abc, right?'); + +// No regex here: +a = [thing / thing, thing / thing]; +x = a /b/ c / d; + +// Template strings +// ---------------- +// Template strings are delimited by back-ticks (grave accent) and +// can span multiple lines. They allow for expressions that inside +// of a dollar-sign plus curly-bracket construct (${...}). + +console.log(`The sum of 2 and 2 is ${2 + 2}`); + +let y = 8; +let my_string = `This is a multiline +string that also contains +a template ${y + (4.1 - 2.2)}`; diff --git a/tests/syntax-highlighting/file.json b/tests/syntax-highlighting/file.json new file mode 100644 index 0000000..3707e73 --- /dev/null +++ b/tests/syntax-highlighting/file.json @@ -0,0 +1,12 @@ +{ + "hi": -1.1e1, "b": 2, + "abc": "hi", + "dce": [ + 1.2, 2e10, -3, + 1, 2, + "string" + ], + "fgh": { + "a": 1 + } +} diff --git a/tests/syntax-highlighting/file.la b/tests/syntax-highlighting/file.la new file mode 100644 index 0000000..db76e5b --- /dev/null +++ b/tests/syntax-highlighting/file.la @@ -0,0 +1,36 @@ +# moo.la - a libtool library file +# Generated by ltmain.sh - GNU libtool 1.5.22 Debian 1.5.22-4 (1.1220.2.365 2005/12/18 22:14:06) +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='moo.so' + +# Names of this library. +library_names='moo.so moo.so moo.so' + +# The name of the static archive. +old_library='' + +# Libraries that this one depends upon. +dependency_libs=' -L/usr/local/gtk/lib /home/muntyan/projects/gtk/build/moo/moo/libmoo.la -lutil /usr/local/gtk/lib/libgtk-x11-2.0.la -lXext -lXinerama -lXrandr -lXcursor -lXfixes /usr/local/gtk/lib/libgdk-x11-2.0.la -latk-1.0 /usr/local/gtk/lib/libgdk_pixbuf-2.0.la /usr/local/gtk/lib/libpangocairo-1.0.la /usr/local/gtk/lib/libpangoft2-1.0.la /usr/local/gtk/lib/libpango-1.0.la /usr/local/gtk/lib/libcairo.la -lfreetype -lz -lfontconfig -lpng12 -lXrender -lX11 -lm /usr/local/gtk/lib/libgobject-2.0.la /usr/local/gtk/lib/libgmodule-2.0.la -ldl /usr/local/gtk/lib/libgthread-2.0.la -lpthread /usr/local/gtk/lib/libglib-2.0.la -lrt -lpcre /usr/lib/gcc/i486-linux-gnu/4.1.2/../../..//libfam.la -lrpcsvc /usr/lib/gcc/i486-linux-gnu/4.1.2/../../..//libxml2.la -L/usr/lib/python2.4 -lpython2.4 ' + +# Version information for moo. +current=0 +age=0 +revision=0 + +# Is this an already installed library? +installed=no + +# Should we warn about portability when linking against -modules? +shouldnotlink=yes + +# Files to dlopen/dlpreopen +dlopen='' +dlpreopen='' + +# Directory that this library needs to be installed in: +libdir='/usr/local/gtk/lib/python2.4/site-packages' +relink_command="(cd /home/muntyan/projects/gtk/build/moo/moo; /bin/sh ../libtool --tag=CC --mode=relink gcc -g -L/usr/local/gtk/lib -o moo.la -rpath /usr/local/gtk/lib/python2.4/site-packages -no-undefined -module -avoid-version -export-symbols-regex initmoo moopython/libmoomod.la libmoo.la -lutil -L/usr/local/gtk/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -pthread -L/usr/local/gtk/lib -lgthread-2.0 -lglib-2.0 -lpcre -lfam -lxml2 -L/usr/lib/python2.4 -lpython2.4 @inst_prefix_dir@)" diff --git a/tests/syntax-highlighting/file.less b/tests/syntax-highlighting/file.less new file mode 100644 index 0000000..ef8308e --- /dev/null +++ b/tests/syntax-highlighting/file.less @@ -0,0 +1,779 @@ +/* + * nesting + */ + +#header { + width: 300px; + + .navigation { + font-size: 12px; + } + + @media (min-width: 768px) { + width: 600px; + + @media (min-resolution: 192dpi) { + background-image: url(/img/retina2x.png); + } + } +} + + +/* + * parent selector + */ + +.component { + &:hover { + text-decoration: underline; + } + + // compound selector + &__element, + &--modifier { + border: 1px; + } + + // multiple & + & + & { + color: red; + } + + // changing selector order + body.firefox & { + font-weight: normal; + } +} + + +/* + * variables, data types + */ + +// assignment +@number: 5em; +@double-quoted-string: "foo"; +@single-quoted-string: 'bar'; +@double-quoted-escape-string: ~"foo"; +@single-quoted-escape-string: ~'bar'; +@not-quoted-string: baz; +@spaces-list: 1px 2px 3px 4px; +@commas-list: arial, some-other-arial, sans-serif; +@color: #fe57a1; + +@detached-ruleset: { + color: red; + + div { + color: blue; + } +}; + +#main { + // property value + width: @width; + + // variable reference + color: @@color-variable-name; + + // property variable + background-color: $color; + + // use detached ruleset + @detached-ruleset(); // parentheses required +} + +// media type, feature test +@import "foo" @type and @feature-test, (@feature-test-content); +@media @type and @feature-test, (@feature-test-content) { + width: 700px; +} + +// font feature value +@font-feature-values Font One { + @styleset { + nice-style: @value; + } +} + +// @keyframes name +@keyframes @myanim { + from { width: 0; } + to { width: 100%; } +} + + +/* + * cases where Less doesn't currently accept variables (as of Less 3.0.0) + * but may be still be incidentally highlighted + */ + +// font feature values font name +@font-feature-values @fontname { + @styleset { + nice-style: 12; + } +} + +// @namespace name +@namespace @name url('http://www.w3.org/2000/svg'); + +// @page custom name, pseudo-page +@page @name { + margin: 0; + + @left-top { + content: ''; + } +} + + +/* + * variable interpolation + */ + +// selector +@{hash-id}, +#@{id}, +#i@{d}, +@{whole-class}, +.part-@{class}-fragment, +@{div}, +d@{i}v, +[@{attr}=@{value}], +[@{attr-selector-content}], +@{attr-selector}, +@{selection}, +::se@{lect}ion, +@{hover}, +:ho@{v}er, +@{lang-fr}, +:la@{ng}(fr), +:lang(@{fr}), +:nth-child(@{expr}), +:not(@{div}) { + + // property name + @{font}: serif; + background-@{image}: none; + border-@{bottom}-width: 0; + + // inside strings + content: "@{var}"; + content: '@{var}'; + + // nested interpolations + content: "@{@{nested}-variable}"; +} + +// font feature type, custom name +@font-feature-values Font One { + @{type} { + @{name}: 12; + } +} + +// inside @import url() +@import url("http://fonts.googleapis.com/css?family=@{family}"); +// inside @import string +@import "http://fonts.googleapis.com/css?family=@{family}"; + +// @keyframes selectors +@keyframes myanim { + @{from} { width: 0; } + @{to} { width: 100%; } +} + +// @page margin box type +@page toc, :first { + margin: 0; + + @{margin-box-type} { + content: ''; + } +} + + +/* + * operations + */ + +body { + width: (1px + (2em - 3rem)) * (4 / 5vh); + + // unary negation + z-index: -@z-index; + margin-bottom: -(@base * 2); +} + + +/* + * functions + */ + +body { + // Less string format function + content: %("1 plus 2 is %d", 1 + 2); + + // single line comments not parsed inside url() + background: url(http://example.com/styles.css); + + // semicolons separators + color: hsl(90; 100%; 50%); +} + + +/* + * extend + */ + +// attached to selector +#main:extend(.card-style), +.sidebar :extend(div pre) { + color: blue; +} + +#main { + // inside ruleset + &:extend(#board:nth-child(2n+3)); + + // all keyword + &:extend(div ~ .inline[name="foo"] all); +} + + +/* + * property merge + */ + +code { + // with comma + box-shadow+: 0 0 20px black; + + // with space + transform+_: scale(2); +} + + +/* + * mixins + */ + +// mixin definition +.black() { + color: black; +} + +// with parameters +.box(@margin, @padding) { // comma separated + margin: @margin; + padding: @padding; +} +.box(@margin; @padding) { // semicolon separated + margin: @margin; + padding: @padding; +} +.box(@margin: 10px; @padding: 10px) { // default parameters + margin: @margin; + padding: @padding; +} + +// @arguments +.box-shadow(@x: 0; @y: 0; @blur: 1px; @color: #000) { + box-shadow: @arguments; +} + +// variable arguments +.mixin(...) {} // 0 or more arguments +.mixin(@a; ...) {} // at least 1 argument +.mixin(@a; @rest...) {} // remaining arguments bound to variable + +// with pattern +.mixin(dark; 5px) {} +.mixin(light; #000) {} + +// mixin call +#main { + // existing styles + #header; + .card-style; + + // existing styles with parentheses (optional), + // or mixins with parentheses and no required parameters + #header(); + .card-style(); + + // namespaced styles + #outer > .inner; + #outer .inner; + #outer.inner; + + // important modifier + #header !important; + .card-style() !important; + #outer > .inner !important; + + // with parameters + .box(20px, 10px); // comma separated + .box(20px; 10px); // semicolon separated + .box(@padding: 10px; @margin: 20px); // named parameters + .box(@list...); // expands values in @list as arguments + .mixin({ // detached ruleset + color: red; + div { + color: blue; + } + }); + + // with pattern + .mixin(dark; 5px); + .mixin(light; #000); +} + + +/* + * guards + */ + +// regular styles +button when (@my-option = true) { + color: white; +} +& when (@my-option = true) { + button { + color: white; + } + a { + color: blue; + } +} + +// namespace +#namespace when (@mode = huge) { + .mixin() {} +} +#namespace { + .mixin() when (@mode = huge) {} +} + +// mixin +.mixin (@a) when (lightness(@a) >= 50%) { + background-color: black; +} +.mixin (@a) when (lightness(@a) < 50%) { + background-color: white; +} + +// comparison operators, logical operators +.mixin (@a) when (@a >= 0) and (@a =< 0) {} +.mixin (@a) when (@a < 0) or (@a > 0) {} +.mixin (@a) when (@a < 0), (@a > 0) {} +.mixin (@a) when not (@a = 0) {} + +// true keyword +.mixin (@a) when (@a) {} +.mixin (@a) when (@a = true) {} + + +/* + * at-rules + */ + +// @import +@import "@{themes}/tidal-wave.less"; +@import (optional, reference) "foo.less" screen and (orientation: landscape), print; // import options + +// @plugin +@plugin 'my-plugin'; +@plugin (options) 'my-plugin'; // plugin options + +// @plugin function call +my-plugin(); +div { + my-plugin(red; 10px); +} + + +/* + * test cases + */ + +.declarations-or-selectors { + // declarations + display:block; + font-family:arial; + @{property}:block; + + // selectors + input:focus { + opacity: 0.5; + } + div:nth-child(2n+1) { + background-color: gray; + } + @{selector}:focus { + color: blue; + } + a:@{state} { + color: blue; + } +} + + +// from file.css + +/* + * general + */ + +/* whitespace */ +#main +{ + color:aqua; + float: left!important; + margin : 0 ; + width + : + 100% + ! + important + ; +} + +/* case insensitivity */ +Body { + FONT: 12Px/16pX iTaLiC sans-SERIF; +} + + +/* + * selectors + */ + +/* simple selectors */ +#testID, /* id */ +.someclass, /* class */ +div, /* type */ +*, /* universal */ +[lang|="zh"] { /* attribute */ + color: black; +} + +/* combinators */ +header + main, /* adjacent sibling */ +li ~ li, /* general sibling */ +ul > li, /* child */ +ul ul { /* descendant */ + color: blue; +} + +/* pseudo-elements */ +:after, +::after, +::placeholder, +::selection { + color: green; +} + +/* pseudo-classes */ +:hover, +:required, +:lang(fr), +:not(div#sidebar.fancy), +:nth-child(n+1), +:nth-last-child(-2n - 30), +:nth-of-type(5), +:nth-last-of-type(even) { + color: yellow; +} + +/* pseudo-classes with invalid arguments */ +:not(div:before), /* pseudo-element */ +:not(input::placeholder), /* pseudo-element */ +:not(p:not(:lang(en))), /* nested :not */ +:nth-child(1.2n), /* non-integer */ +:nth-child(.5), /* non-integer */ +:nth-child(n+-1) { /* number sign */ + color: red; +} + +/* namespace qualified */ +a, /* type in default namespace */ +svg|a, /* type in specified namespace */ +|a, /* type in no namespace */ +*|a, /* type in all namespaces (including no namespace) */ +svg|*, /* universal */ +svg|[fill] { /* attribute */ + color: white; +} + + +/* + * basic data types + */ + +#main { + /* angle */ + transform: rotate(+33.333e+3deg); + + /* color */ + color: #f00; + color: #f00f; /* #rgba */ + color: #ff0000; + color: #ff0000ff; /* #rrggbbaa */ + color: red; + color: lightgoldenrodyellow; + color: rebeccapurple; + color: currentColor; + + /* freqency (not currently used for any property) */ + content: 44.1kHz; + + /* integer */ + z-index: +255; + z-index: -1; + + /* length */ + width: 10px; + width: 10.5rem; + width: -10e-2vw; + + /* number */ + opacity: .5; + opacity: 0.3333; + opacity: 1; + opacity: 2e-34; + + /* percentage */ + width: 100%; + + /* string */ + content: "double quoted"; + content: 'single quoted'; + + /* time */ + transition-duration: .4s; + transition-duration: 400ms; + + /* unicode range */ + unicode-range: U+0025-00FF; + unicode-range: U+4??; /* wildcard range */ +} + +/* ratio */ +@media (min-aspect-ratio: 16/9) {} + +/* resolution */ +@media (min-resolution: +2.54dpcm) {} + + +/* + * identifiers + */ + +/* leading hyphens */ +#-here.-there, +#-- .--everywhere { /* two hyphens: https://stackoverflow.com/a/30822662 */ + color: blue; +} + +/* non-ASCII */ +#español, +#你好, +.❤♫ { + color: green; +} + +/* invalid identifiers */ +#1id, /* starts with digit */ +.-2class { /* starts with hyphen digit */ + color: maroon; +} + + +/* + * escaping + */ + +/* selectors */ +#\..\+\ space\@\>, /* special character escape */ +#\E9 dition .\0000E9dition .motion_\e9motion, /* Unicode character escape */ +.\e33 div, /* trailing space terminates Unicode character escape */ +.\e33 div, /* extra space to denote separate tokens */ +.\31 23 { /* escape leading digit of identifier */ + + /* property value */ + content: "\E9 dition \ + \"\0000E9dition\" \ + \e9motion"; + + /* function name */ + background: \u\72\l(image.png); +} + + +/* + * functions + */ + +#main { + /* url */ + background: url("image.svg"); + + /* function argument keywords */ + background-image: linear-gradient(to left top, #fff, blue); + grid-template-columns: repeat(2, minmax(max-content, 300px) 1fr) 100px; +} + + +/* + * style properties + */ + +#main { + /* svg */ + fill: url(#pattern); + text-rendering: optimizeLegibility; + + /* css3 */ + font-variant-east-asian: jis04; + size: letter; + transition-timing-function: ease-in; + + /* animatable */ + transition-property: height, font-size, visibility; +} + +/* + * modifiers + */ +body { + background: pink !important; +} + + +/* + * media queries + */ + +@media screen, (orientation: portrait) {} +@media not (print and (min-monochrome: 16) and (color)) {} +@media only screen {} @media not print {} + + +/* + * at-rules + */ + +/* @font-face */ +@font-face { + font-family: MyHelvetica; + src: local("Helvetica Neue"), + local("HelveticaNeue"), + url(MgOpenModerna.ttf); +} + +/* @font-feature-values */ +@font-feature-values Font One { + @styleset { + nice-style: 12; + } +} +.nice-look { + font-variant-alternates: styleset(nice-style); +} + +/* @import */ +@import URL("fineprint.css"); +@import 'custom.css'; +@import url('landscape.css') screen and (orientation: landscape), print; + +/* @keyframes */ +@keyframes myanim { + from { opacity: 0.0; } + 50% { opacity: 0.5; } + to { opacity: 1.0; } +} + +/* @media */ +@media all { + body { + background: gray; + } + @media screen, (orientation: portrait) { + body { + background: grey; + } + } +} + +/* @namespace */ +@namespace "http://www.w3.org/1999/xhtml"; +@namespace svg url(http://www.w3.org/2000/svg); + +/* @page */ +@page { + bleed: 1cm; +} +@page toc, :blank { + margin: 2cm; + marks: crop cross; +} +@page index:left { + size: A4; + + @top-right { + content: "Page " counter(page); + } +} + +/* @supports */ +@supports (animation-name: test) { + @keyframes 'my-complicated-animation' { + 0% { width: 0; } + 100% { width: 100%; } + } +} + + +/* + * vendor-specific extensions + */ + +/* pseudo-elements */ +input[type="number"]::-webkit-outer-spin-button, +input[type="number"]::-webkit-inner-spin-button { + -webkit-appearance: none; +} +input[type="number"] { + -moz-appearance: textfield; +} + +/* pseudo-classes */ +#page:-moz-full-screen, +#page:-ms-fullscreen, +#page:-webkit-full-screen { + background: silver; +} + +/* functions */ +.footer { + background-image: -webkit-linear-gradient(to left top, #fff, blue); +} + +/* style properties */ +#sidebar { + -ms-overflow-style: -ms-autohiding-scrollbar; +} +@supports not ((text-align-last: justify) or (-moz-text-align-last: justify)) { + body { + text-align: justify; + } +} + +/* at-rules */ +@-webkit-keyframes myanim { + from { opacity: 0.0; } + 50% { opacity: 0.5; } + to { opacity: 1.0; } +} diff --git a/tests/syntax-highlighting/file.ll b/tests/syntax-highlighting/file.ll new file mode 100644 index 0000000..8f4e570 --- /dev/null +++ b/tests/syntax-highlighting/file.ll @@ -0,0 +1,18 @@ +; LLVM intermediate representation +; Run with: llc file.ll && gcc file.s && ./a.out + +@str = internal constant [4 x i8] c"%d\0A\00" + +declare i32 @printf(i8*, ...) + +define i32 @main() { + ; Print a secret number on the screen + %1 = select i1 true, float 0x402ABD70A0000000, float 0xC0FFEE0000000000 + %2 = fpext float %1 to double + %3 = fmul double %2, 1.000000e+02 + %4 = fptoui double %3 to i32 + %5 = add i32 %4, 1 + ; Call printf + call i32 (i8*, ...)* @printf(i8* getelementptr inbounds ([4 x i8]* @str, i32 0, i32 0), i32 %5) + ret i32 0 +} diff --git a/tests/syntax-highlighting/file.logcat b/tests/syntax-highlighting/file.logcat new file mode 100644 index 0000000..4bcb5c2 --- /dev/null +++ b/tests/syntax-highlighting/file.logcat @@ -0,0 +1,27 @@ +--------- beginning of /dev/log/system +V/test ( 145): The quick brown fox jumps over the lazy dog +D/test ( 141): The quick brown fox jumps over the lazy dog +I/test ( 141): The quick brown fox jumps over the lazy dog +W/test ( 141): The quick brown fox jumps over the lazy dog +E/test ( 141): The quick brown fox jumps over the lazy dog +F/test ( 141): The quick brown fox jumps over the lazy dog +--------- beginning of /dev/log/system +V(test ( 145): The quick brown fox jumps over the lazy dog +D(test ( 141): The quick brown fox jumps over the lazy dog +I(test ( 141): The quick brown fox jumps over the lazy dog +W(test ( 141): The quick brown fox jumps over the lazy dog +E(test ( 141): The quick brown fox jumps over the lazy dog +F(test ( 141): The quick brown fox jumps over the lazy dog +--------- beginning of /dev/log/main +01-28 12:36:22.826 8 8 V TEST : "The quick brown fox jumps over the lazy dog" +01-28 12:36:22.826 98 98 D TEST : "The quick brown fox jumps over the lazy dog" +01-28 12:36:22.826 398 398 I TEST : "The quick brown fox jumps over the lazy dog" +01-28 12:36:22.826 3398 3398 W TEST : "The quick brown fox jumps over the lazy dog" +01-28 12:36:22.827 3398 3398 E TEST : "The quick brown fox jumps over the lazy dog" +01-28 12:36:22.827 3398 3398 F TEST : "The quick brown fox jumps over the lazy dog" +2017-01-28 12:36:22.826 8 8 V TEST : "The quick brown fox jumps over the lazy dog" +2017-01-28 12:36:22.826 98 98 D TEST : "The quick brown fox jumps over the lazy dog" +2017-01-28 12:36:22.826 398 398 I TEST : "The quick brown fox jumps over the lazy dog" +2017-01-28 12:36:22.826 3398 3398 W TEST : "The quick brown fox jumps over the lazy dog" +2017-01-28 12:36:22.827 3398 3398 E TEST : "The quick brown fox jumps over the lazy dog" +2017-01-28 12:36:22.827 3398 3398 F TEST : "The quick brown fox jumps over the lazy dog" diff --git a/tests/syntax-highlighting/file.m b/tests/syntax-highlighting/file.m new file mode 100644 index 0000000..66785aa --- /dev/null +++ b/tests/syntax-highlighting/file.m @@ -0,0 +1,21 @@ +#import +#import +@interface Lalala : Object +- (BOOL) sayHello; +@end + +@implementation Lalala : Object +- (BOOL) sayHello +{ + printf ("Hello there!\n"); + return YES; +} +@end + +int main (void) +{ + Lalala *obj = [[Lalala alloc] init]; + [obj sayHello]; + [obj free]; + return 0; +} diff --git a/tests/syntax-highlighting/file.m4 b/tests/syntax-highlighting/file.m4 new file mode 100644 index 0000000..7b932ab --- /dev/null +++ b/tests/syntax-highlighting/file.m4 @@ -0,0 +1,4 @@ +dnl an m4 file +AC_DEFINE([foo],[echo "Hi there!"]) +AC_CHECK_FUNC([foo],[yes=yes],[yes=no]) +foo() diff --git a/tests/syntax-highlighting/file.ml b/tests/syntax-highlighting/file.ml new file mode 100644 index 0000000..579f1f2 --- /dev/null +++ b/tests/syntax-highlighting/file.ml @@ -0,0 +1,13 @@ +open List + +(*comment +(** comment in comment *) +*) + +let id = fun x -> x + +(**) (*<- empty comment*) +(**ocamldoc (*and comment*) *) + +let _ = print_string "ok\n" + diff --git a/tests/syntax-highlighting/file.octave b/tests/syntax-highlighting/file.octave new file mode 100644 index 0000000..a1d887a --- /dev/null +++ b/tests/syntax-highlighting/file.octave @@ -0,0 +1,3 @@ +% gtk-source-lang: octave +% -*- octave -*- +No idea what syntax is diff --git a/tests/syntax-highlighting/file.ooc b/tests/syntax-highlighting/file.ooc new file mode 100644 index 0000000..66992c4 --- /dev/null +++ b/tests/syntax-highlighting/file.ooc @@ -0,0 +1,10 @@ +import structs/[ArrayList, LinkedList], io/FileReader +include stdarg, memory, string +use sdl, gtk +pi := const 3.14 +Int: cover from int { + toString: func -> String { "%d" format() } +} +Dog: class extends Animal { + barf: func { ("woof! " * 2) println() } +} diff --git a/tests/syntax-highlighting/file.pc b/tests/syntax-highlighting/file.pc new file mode 100644 index 0000000..a914078 --- /dev/null +++ b/tests/syntax-highlighting/file.pc @@ -0,0 +1,14 @@ +# A comment +prefix=/usr +exec_prefix= +libdir=/lib +includedir=/include + +Name: cairo +Description: Multi-platform 2D graphics library +Version: 1.4.10 + +Requires.private: freetype2 >= 8.0.2 fontconfig libpng12 xrender >= 0.6 x11 +Libs: -L -lcairo +Libs.private: -lz -lm +Cflags: -I/cairo diff --git a/tests/syntax-highlighting/file.pig b/tests/syntax-highlighting/file.pig new file mode 100644 index 0000000..d76eef6 --- /dev/null +++ b/tests/syntax-highlighting/file.pig @@ -0,0 +1,11 @@ +/* + * This file tests Apache Pig 0.12 Syntax Highlighting + */ + +fake = LOAD 'fakeData' USING PigStorage() AS (name:chararray, age:int); + +fake = limit fake 5; -- operations can be case insensitive + +fake = FOREACH fake GENERATE TRIM(name) AS name, null as nullField, false AS booleanConst; + +DUMP fake; diff --git a/tests/syntax-highlighting/file.pl b/tests/syntax-highlighting/file.pl new file mode 100644 index 0000000..580fe18 --- /dev/null +++ b/tests/syntax-highlighting/file.pl @@ -0,0 +1,110 @@ +#!/usr/bin/perl -- # -*- Perl -*- +# +# : collateindex.pl,v 1.10 2004/10/24 17:05:41 petere78 Exp $ + +print OUT "\n\n" if ; + + = {}; # the last indexterm we processed + = 1; # this is the first one + = ""; # we're not in a group yet + = ""; # we've not put anything out yet +@seealsos = (); # See also stack. + +# Termcount is > 0 iff some entries were skipped. + || print STDERR " entries ignored...\n"; + +&end_entry(); + +print OUT "\n" if ; +print OUT "\n"; + +close (OUT); + + || print STDERR "Done.\n"; + +sub same { + my() = shift; + my() = shift; + + my() = ->{'psortas'} || ->{'primary'}; + my() = ->{'ssortas'} || ->{'secondary'}; + my() = ->{'tsortas'} || ->{'tertiary'}; + + my() = ->{'psortas'} || ->{'primary'}; + my() = ->{'ssortas'} || ->{'secondary'}; + my() = ->{'tsortas'} || ->{'tertiary'}; + + my(); + + =~ s/^\s*//; =~ s/\s*$//; = uc(); + =~ s/^\s*//; =~ s/\s*$//; = uc(); + =~ s/^\s*//; =~ s/\s*$//; = uc(); + =~ s/^\s*//; =~ s/\s*$//; = uc(); + =~ s/^\s*//; =~ s/\s*$//; = uc(); + =~ s/^\s*//; =~ s/\s*$//; = uc(); + +# print "[]=[]\n"; +# print "[]=[]\n"; +# print "[]=[]\n"; + + # Two index terms are the same if: + # 1. the primary, secondary, and tertiary entries are the same + # (or have the same SORTAS) + # AND + # 2. They occur in the same titled section + # AND + # 3. They point to the same place + # + # Notes: Scope is used to suppress some entries, but can't be used + # for comparing duplicates. + # Interpretation of "the same place" depends on whether or + # not is true. + + = (( eq ) + && ( eq ) + && ( eq ) + && (->{'title'} eq ->{'title'}) + && (->{'href'} eq ->{'href'})); + + # If we're linking to points, they're only the same if they link + # to exactly the same spot. + = && (->{'hrefpoint'} eq ->{'hrefpoint'}) + if ; + + if () { + warn ": duplicated index entry found: \n"; + } + + ; +} + +sub tsame { + # Unlike same(), tsame only compares a single term + my() = shift; + my() = shift; + my() = shift; + my() = substr(, 0, 1) . "sortas"; + my(, ); + + = ->{} || ->{}; + = ->{} || ->{}; + + =~ s/^\s*//; =~ s/\s*$//; = uc(); + =~ s/^\s*//; =~ s/\s*$//; = uc(); + + return eq ; +} + +=head1 EXAMPLE +B B<-o> F F +=head1 EXIT STATUS +=over 5 +=item B<0> +Success +=item B<1> +Failure +=back +=head1 AUTHOR +Norm Walsh Endw@nwalsh.comE +Minor updates by Adam Di Carlo Eadam@onshore.comE and Peter Eisentraut Epeter_e@gmx.netE +=cut diff --git a/tests/syntax-highlighting/file.po b/tests/syntax-highlighting/file.po new file mode 100644 index 0000000..ddcaacb --- /dev/null +++ b/tests/syntax-highlighting/file.po @@ -0,0 +1,24 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR , YEAR. +# +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2006-12-17 09:49-0600\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME \n" +"Language-Team: LANGUAGE \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: 8bit\n" + +#: ../medit/medit.desktop.in.h:1 +msgid "Text editor" +msgstr "" + +#: ../medit/medit.desktop.in.h:2 +msgid "medit" +msgstr "" diff --git a/tests/syntax-highlighting/file.prg b/tests/syntax-highlighting/file.prg new file mode 100644 index 0000000..72e4824 --- /dev/null +++ b/tests/syntax-highlighting/file.prg @@ -0,0 +1,28 @@ +import "mod_say" +import "mod_rand" +import "mod_screen" +import "mod_video" +import "mod_map" +import "mod_key" + +// Bouncing box example +process main() +private + int vx=5, vy=5; + +begin + set_mode(640, 480, 16, MODE_WINDOW); + graph = map_new(20, 20, 16); + map_clear(0, graph, rgb(255, 0, 0)); + x = 320; y = 240; + while(! key(_esc)) + if(x > 630 || x < 10) + vx = -vx; + end; + if(y > 470 || y < 10) + vy = -vy; + end; + x += vx; y += vy; // Move the box + frame; + end; +end; diff --git a/tests/syntax-highlighting/file.prolog b/tests/syntax-highlighting/file.prolog new file mode 100644 index 0000000..557911f --- /dev/null +++ b/tests/syntax-highlighting/file.prolog @@ -0,0 +1,3 @@ +conc([],X,X). +conc([Car|Cdr], X, [Car|ConcatCdr]):- + conc(Cdr, X, ConcatCdr). diff --git a/tests/syntax-highlighting/file.py b/tests/syntax-highlighting/file.py new file mode 100644 index 0000000..819875d --- /dev/null +++ b/tests/syntax-highlighting/file.py @@ -0,0 +1,14 @@ +import sys +from sys import * +class Hello(object): + def __init__(self): + object.__init__(self) + def hello(self): + print >> sys.stderr, "Hi there!" + None, True, False + r'raw \' \ + string' + r"""raw multiline \""" + string""" + +Hello().hello() diff --git a/tests/syntax-highlighting/file.rq b/tests/syntax-highlighting/file.rq new file mode 100644 index 0000000..8be12e4 --- /dev/null +++ b/tests/syntax-highlighting/file.rq @@ -0,0 +1,9 @@ +# Positive test: product of type promotion within the xsd:decimal type tree. + +PREFIX t: +PREFIX rdf: +PREFIX xsd: +ASK + WHERE { t:double1 rdf:value ?l . + t:float1 rdf:value ?r . + FILTER ( datatype(?l + ?r) = xsd:double ) } diff --git a/tests/syntax-highlighting/file.rs b/tests/syntax-highlighting/file.rs new file mode 100644 index 0000000..06742ea --- /dev/null +++ b/tests/syntax-highlighting/file.rs @@ -0,0 +1,56 @@ +// Comment + +enum Animal { + Dog, + Cat +} + +struct Point { + x: i32, + y: i32 +} + +union MyUnion { + f1: u32, + f2: f32, +} + +macro_rules! hello_world_macro { + () => ( + println!("Hello World!"); + ) +} + +fn main() { + let _i8: i8 = 1i8; + let _i16: i16 = 1i16; + let _i32: i32 = 1i32; + let _i64: i64 = 1i64; + let _isize: isize = 1isize; + + let _u8: u8 = 1u8; + let _u16: u16 = 1u16; + let _u32: u32 = 1u32; + let _u64: u64 = 1u64; + let _usize: usize = 1usize; + + let _f32: f32 = 3.14f32; + let _f64: f64 = 3.14f64; + + let valid_binary = 0b0_10; + let invalid_binary= 0b0_13; + + let valid_octal = 0o3_45; + let invalid_octal = 0o3_49; + + let valid_hexadecimal = 0x9_AF; + let invalid_hexadecimal = 0x9_AZ; + + let valid_char: char = 'a'; + let invalid_char = 'ab'; + + let valid_byte: u8 = b'a'; + let invalid_byte = b'ab'; + + hello_world_macro!(); +} diff --git a/tests/syntax-highlighting/file.rst b/tests/syntax-highlighting/file.rst new file mode 100644 index 0000000..a88217f --- /dev/null +++ b/tests/syntax-highlighting/file.rst @@ -0,0 +1,31 @@ +Heading +======= + +These are some addresses: http://www.gnome.org/ and https://www.gnome.org/ and git://git.gnome.org/gtksourceview and ssh://USERNAME@git.gnome.org/git/gtksourceview and gnome-list@gnome.org is the last one. + +Subheading +---------- + + - First ``literal`` Item + - Second **bold** Item + - Subitem `interpreted` + - Third *emphasis* Item + +This is a sentence with a `http-link `_, a `https-link `_, and a footnote [#]_. + +.. image:: images/example.png + :height: 100px + :width: 100 px + +| A line block +> A quote block + +.. + + This is a block that will be shown. + +.. This is a comment and will not be shown. + +.. math:: + + \lambda = \lambda_{0} + \arctan \left[ \frac{x}{-y} \right] diff --git a/tests/syntax-highlighting/file.sci b/tests/syntax-highlighting/file.sci new file mode 100644 index 0000000..f93cd77 --- /dev/null +++ b/tests/syntax-highlighting/file.sci @@ -0,0 +1,14 @@ +// A comment with whites and tabulations +// Scilab editor: http://www.scilab.org/ + +function [a, b] = myfunction(d, e, f) + a = 2.71828 + %pi + f($, :); + b = cos(a) + cosh(a); + if d == e then + b = 10 - e.field; + else + b = " test " + home + return + end + myvar = 1.23e-45; +endfunction diff --git a/tests/syntax-highlighting/file.scss b/tests/syntax-highlighting/file.scss new file mode 100644 index 0000000..bc3dd5e --- /dev/null +++ b/tests/syntax-highlighting/file.scss @@ -0,0 +1,805 @@ +/* + * css extensions + */ + +div { + color: #00ff00; + + // nested rules + #inner.element { + color: #000000; + } + + // parent selector + &:hover { + text-decoration: underline; + } + body.firefox & { + font-weight: normal; + } + &__element, // compound selector + &--modifier { + border: 1px; + } + + // nested properties + font: { + family: fantasy; + size: 30em; + weight: bold; + } + font: 20px/24px fantasy { + weight: bold; + } +} + + +/* + * variables, data types + */ + +// assignment +$number: 5em; +$double-quoted-string: "foo"; +$single-quoted-string: 'bar'; +$not-quoted-string: baz; +$true: true; +$false: false; +$null: null; +$parens-spaces-list: (left top); +$parens-commas-list: (1px, 2px, 3px, 4px); +$no-parens-spaces-list: 1px 2px 3px 4px; +$no-parens-commas-list: arial, some-other-arial, sans-serif; +$trailing-comma: (1 2 3,); // a comma-separated list containing a space-separated list +$bracketed-list: [5rem 6rem 7rem]; // comma or space separated +$map: (medium: 640, 'large': 960, "x-large": 1280, (xx-large,): 1600); // must have parentheses, be comma separated +$color: #fe57a1; +$function-reference: get-function($function-name); + +// assign if not already assigned to +$var: 1 !default; + +#main { + // global variable defined in block + $width: 5em !global; + + // list of parent selectors + $selectors: &; + + // property value + width: $width; +} + +// media feature test +@import "foo" ($orientation: $landscape); +@media ($orientation-landscape) { + width: 700px; +} + +// font feature value +@font-feature-values Font One { + @styleset { + nice-style: $value; + } +} + +// @supports test +@supports ($animation-name: $test) { + body { + animation-name: test; + } +} +@supports ($animation-name-test) { + body { + animation-name: test; + } +} + +// @at-root query +@at-root ($type: $value) { + .top-level { + background: pink; + } +} +@at-root ($query) { + .top-level { + background: pink; + } +} + + +/* + * operations + */ + +body { + // arithmetic operators + width: (1px + (2em - 3rem)) * (4 / 5vh) % 6cm; + + // plain css + font: 10px/8px; + font: (italic bold 10px/8px); + font: #{$font-size}/#{$line-height}; + + // division + width: $width/2; + width: round(1.5)/2; + width: (500px/2); + width: 5px + 8px/2px; + + // minus sign + animation-name: a-1; // identifier + margin: (5px - 3px) 5px-3px 3-2 (1 -$var); // subtraction + margin: 1 -3em; // negative number + margin: -$var -(1); // unary negation + + // string concatenation + content: "Foo " + Bar; // "Foo Bar" + font-family: sans- + "serif"; // sans-serif +} + +// string concatenation in string-only context +@keyframes ('foo' + bar) {} +@keyframes (foo + "bar") {} + +// comparison operators, logical operators +$a: (1 < 2 and 1 > 2) or (1 <= 2) and 1 >= 2; +$b: not (1 == 2) and 1 != 2; + + +/* + * interpolation + */ + +// selector +#{'#id'}, +#i#{'d'}, +#{'.whole-class'}, +.part-#{'class'}-fragment, +#{'div'}, +d#{'i'}v, +[#{'attr'}=#{'value'}], +[#{'attr="value"'}], +#{'[attr="value"]'}, +#{'::selection'}, +::se#{'lect'}ion, +#{':hover'}, +:ho#{'v'}er, +#{':lang(fr)'}, +:la#{'ng(f'}r), +:lang(#{'fr'}), +:nth-child(#{'2n+1'}), +:not(#{'div'}), +#{'%placeholder'}, +%pla#{'ceho'}lder { + + // property name + #{'font'}: serif; + background-#{'image'}: none; + border-#{'bottom'}-width: 0; + + // property value + font-size: #{$font-size}; + font-family: #{'arial, sans'}-serif; + width: #{5 * (3 - 1)}px; + + // function name + background: #{'url'}('image.png'); + background: u#{'r'}l('image.png'); + + // !important (exclamation mark needs to be inside) + width: 0 #{'!important'}; + width: 0 #{'!import'}ant; + + // inside strings + content: "#{$var}"; + content: '#{$var}'; + + // inside comments + /* multi-line: #{$yes} */ + // single line: #{$no} +} + +// media type, feature test +@import "foo" #{'screen'} and (#{'orientation'}: #{'landscape'}); +@media #{'screen'} and (#{'orientation: landscape'}) { + width: 700px; +} + +// font name, font feature custom name, font feature value +@font-feature-values #{'Font One'} { + @styleset { // interpolation not accepted here? + #{'nice-style'}: #{12}; + } +} + +// inside @import url() +@import url("http://fonts.googleapis.com/css?family=#{$family}"); + +// @keyframes name, selector +@keyframes #{'myanim'} { + #{'from'} { width: 0; } + #{'to'} { width: 100%; } +} + +// @namespace name +@namespace #{'svg'} url('http://www.w3.org/2000/svg'); + +// @page custom name, pseudo-page +@page #{'toc'}, #{':first'} { + margin: 0; + + @left-top { // interpolation not accepted here? + content: ''; + } +} + +// @supports test +@supports (#{'animation-name'}: #{'test'}) { + body { + animation-name: test; + } +} +@supports (#{'animation-name: test'}) { + body { + animation-name: test; + } +} + +// @at-root query +@at-root (#{'without'}: #{'media'}) { + .top-level { + background: pink; + } +} +@at-root (#{'without: media'}) { + .top-level { + background: pink; + } +} + + +/* + * functions + */ + +body { + // single line comments not parsed inside url() + background: url(http://example.com/styles.css); + + // keyword arguments + color: hsl($hue: 0, $saturation: 100%, $lightness: 50%); +} + + +/* + * at-rules + */ + +// @import +@import "rounded-corners", "text-shadow"; // multiple files +#main { // nested @import + @import "example"; // but not inside mixins or control directives +} + +// nested @media +@media screen { + .sidebar { + @media (orientation: landscape) { + width: 500px; + } + } +} + +// @extend +#main { + @extend #hello; + + // no error if not found + @extend .from[the="other-side"] !optional; + + // placeholder selector + @extend div%placeholder; +} + +// @at-root +#main { + @at-root .child { + color: red; + } +} +@media screen { + @supports (font-variant-alternates: styleset(nice-style)) { + @at-root (without: media supports) { // with query + .absolutely-top-level { + background: pink; + } + } + } +} + +// @if/@else if/@else, @debug/@warn/@error +@if $num-errors == 0 { + @debug "$num-errors is 0"; +} @else if $num-errors > 0 { + @warn "oops there are #{$num-errors} errors"; +} @else { + @error "negative errors?!?"; +} + +// @for +@for $i from 1 through 3 { + .item-#{$i} { + width: 2em * $i; + } +} + +// @each +@each $animal in puma, sea-slug, egret, salamander { + .#{$animal}-icon { + background-image: url('/images/#{$animal}.png'); + } +} +@each $header, $size in (h1: 2em, h2: 1.5em, h3: 1.2em) { + #{$header} { + font-size: $size; + } +} + +// @while +$i: 6; +@while $i > 0 { + .item-#{$i} { + width: 2em * $i; + } + $i: $i - 2; +} + +// @mixin +@mixin large-text { + font-size: 128px; +} +@mixin sexy-border($color, $width: 1in) { // with arguments, default value + border: { + color: $color; + width: $width; + } +} +@mixin box-shadow($shadows...) { // variable arguments + box-shadow: $shadows; +} +@mixin apply-to-ie6-only { // accepts content block + * html { + @content; + } +} + +// @include +.page-title { + @include large-text; +} +p { + @include sexy-border(blue); // with arguments +} +div { + @include sexy-border($color: blue, $width: 10cm); // keyword arguments +} +.primary { + @include box-shadow($shadows...); // expand list into arguments +} +@include apply-to-ie6-only { // passing content block + display: block; + + #main { + background: black; + } +} + +// @function +@function grid-width($n) { + @return $n * $grid-width + ($n - 1) * $gutter-width; +} +#sidebar { + width: grid-width(5); +} + + +/* + * test cases + */ + +.declarations-or-selectors { + // declarations + display:block; + font-family:arial; + font: { + family: fantasy; + weight: bold; + } + font: fantasy { + size: 20px; + style: italic; + } + #{$property}:block; + #{$property}: { + color: red; + } + color:#000; + width:#{$width}; + + // selectors + input:focus { + opacity: 0.5; + } + div:nth-child(2n+1) { + background-color: gray; + } + div:-moz-full-screen { + display: block; + } + a:#{$state} { + color: blue; + } + #{$selector}:focus { + color: blue; + } +} + + +// from file.css + +/* + * general + */ + +/* whitespace */ +#main +{ + color:aqua; + float: left!important; + margin : 0 ; + width + : + 100% + ! + important + ; +} + +/* case insensitivity */ +Body { + FONT: 12Px/16pX iTaLiC sans-SERIF; +} + + +/* + * selectors + */ + +/* simple selectors */ +#testID, /* id */ +.someclass, /* class */ +div, /* type */ +*, /* universal */ +[lang|="zh"] { /* attribute */ + color: black; +} + +/* combinators */ +header + main, /* adjacent sibling */ +li ~ li, /* general sibling */ +ul > li, /* child */ +ul ul { /* descendant */ + color: blue; +} + +/* pseudo-elements */ +:after, +::after, +::placeholder, +::selection { + color: green; +} + +/* pseudo-classes */ +:hover, +:required, +:lang(fr), +:not(div#sidebar.fancy), +:nth-child(n+1), +:nth-last-child(-2n - 30), +:nth-of-type(5), +:nth-last-of-type(even) { + color: yellow; +} + +/* pseudo-classes with invalid arguments */ +:not(div:before), /* pseudo-element */ +:not(input::placeholder), /* pseudo-element */ +:not(p:not(:lang(en))), /* nested :not */ +:nth-child(1.2n), /* non-integer */ +:nth-child(.5), /* non-integer */ +:nth-child(n+-1) { /* number sign */ + color: red; +} + +/* namespace qualified */ +a, /* type in default namespace */ +svg|a, /* type in specified namespace */ +|a, /* type in no namespace */ +*|a, /* type in all namespaces (including no namespace) */ +svg|*, /* universal */ +svg|[fill] { /* attribute */ + color: white; +} + + +/* + * basic data types + */ + +#main { + /* angle */ + transform: rotate(+33.333e+3deg); + + /* color */ + color: #f00; + color: #f00f; /* #rgba */ + color: #ff0000; + color: #ff0000ff; /* #rrggbbaa */ + color: red; + color: lightgoldenrodyellow; + color: rebeccapurple; + color: currentColor; + + /* freqency (not currently used for any property) */ + content: 44.1kHz; + + /* integer */ + z-index: +255; + z-index: -1; + + /* length */ + width: 10px; + width: 10.5rem; + width: -10e-2vw; + + /* number */ + opacity: .5; + opacity: 0.3333; + opacity: 1; + opacity: 2e-34; + + /* percentage */ + width: 100%; + + /* string */ + content: "double quoted"; + content: 'single quoted'; + + /* time */ + transition-duration: .4s; + transition-duration: 400ms; + + /* unicode range */ + unicode-range: U+0025-00FF; + unicode-range: U+4??; /* wildcard range */ +} + +/* ratio */ +@media (min-aspect-ratio: 16/9) {} + +/* resolution */ +@media (min-resolution: +2.54dpcm) {} + + +/* + * identifiers + */ + +/* leading hyphens */ +#-here.-there, +#-- .--everywhere { /* two hyphens: https://stackoverflow.com/a/30822662 */ + color: blue; +} + +/* non-ASCII */ +#español, +#你好, +.❤♫ { + color: green; +} + +/* invalid identifiers */ +#1id, /* starts with digit */ +.-2class { /* starts with hyphen digit */ + color: maroon; +} + + +/* + * escaping + */ + +/* selectors */ +#\..\+\ space\@\>, /* special character escape */ +#\E9 dition .\0000E9dition .motion_\e9motion, /* Unicode character escape */ +.\e33 div, /* trailing space terminates Unicode character escape */ +.\e33 div, /* extra space to denote separate tokens */ +.\31 23 { /* escape leading digit of identifier */ + + /* property value */ + content: "\E9 dition \ + \"\0000E9dition\" \ + \e9motion"; + + /* function name */ + background: \u\72\l(image.png); +} + + +/* + * functions + */ + +#main { + /* url */ + background: url("image.svg"); + + /* function argument keywords */ + background-image: linear-gradient(to left top, #fff, blue); + grid-template-columns: repeat(2, minmax(max-content, 300px) 1fr) 100px; +} + + +/* + * style properties + */ + +#main { + /* svg */ + fill: url(#pattern); + text-rendering: optimizeLegibility; + + /* css3 */ + font-variant-east-asian: jis04; + size: letter; + transition-timing-function: ease-in; + + /* animatable */ + transition-property: height, font-size, visibility; +} + +/* + * modifiers + */ +body { + background: pink !important; +} + + +/* + * media queries + */ + +@media screen, (orientation: portrait) {} +@media not (print and (min-monochrome: 16) and (color)) {} +@media only screen {} @media not print {} + + +/* + * at-rules + */ + +/* @font-face */ +@font-face { + font-family: MyHelvetica; + src: local("Helvetica Neue"), + local("HelveticaNeue"), + url(MgOpenModerna.ttf); +} + +/* @font-feature-values */ +@font-feature-values Font One { + @styleset { + nice-style: 12; + } +} +.nice-look { + font-variant-alternates: styleset(nice-style); +} + +/* @import */ +@import URL("fineprint.css"); +@import 'custom.css'; +@import url('landscape.css') screen and (orientation: landscape), print; + +/* @keyframes */ +@keyframes myanim { + from { opacity: 0.0; } + 50% { opacity: 0.5; } + to { opacity: 1.0; } +} + +/* @media */ +@media all { + body { + background: gray; + } + @media screen, (orientation: portrait) { + body { + background: grey; + } + } +} + +/* @namespace */ +@namespace "http://www.w3.org/1999/xhtml"; +@namespace svg url(http://www.w3.org/2000/svg); + +/* @page */ +@page { + bleed: 1cm; +} +@page toc, :blank { + margin: 2cm; + marks: crop cross; +} +@page index:left { + size: A4; + + @top-right { + content: "Page " counter(page); + } +} + +/* @supports */ +@supports (animation-name: test) { + @keyframes 'my-complicated-animation' { + 0% { width: 0; } + 100% { width: 100%; } + } +} + + +/* + * vendor-specific extensions + */ + +/* pseudo-elements */ +input[type="number"]::-webkit-outer-spin-button, +input[type="number"]::-webkit-inner-spin-button { + -webkit-appearance: none; +} +input[type="number"] { + -moz-appearance: textfield; +} + +/* pseudo-classes */ +#page:-moz-full-screen, +#page:-ms-fullscreen, +#page:-webkit-full-screen { + background: silver; +} + +/* functions */ +.footer { + background-image: -webkit-linear-gradient(to left top, #fff, blue); +} + +/* style properties */ +#sidebar { + -ms-overflow-style: -ms-autohiding-scrollbar; +} +@supports not ((text-align-last: justify) or (-moz-text-align-last: justify)) { + body { + text-align: justify; + } +} + +/* at-rules */ +@-webkit-keyframes myanim { + from { opacity: 0.0; } + 50% { opacity: 0.5; } + to { opacity: 1.0; } +} diff --git a/tests/syntax-highlighting/file.sh b/tests/syntax-highlighting/file.sh new file mode 100644 index 0000000..10d6392 --- /dev/null +++ b/tests/syntax-highlighting/file.sh @@ -0,0 +1,31 @@ +#!/bin/bash +echo "Hi there!" + +# Parameter Expansion + +xxx${xxx}xxx # parameter in braces +xxx${"{"}xxx xxx${"}"}xxx # brace in quoted string + +xxx$0000 # one digit parameter + +xxx${parameter:-word}xxx${parameter-word}xxx # Use Default Values +xxx${parameter:=word}xxx${parameter=word}xxx # Assign Default Values +xxx${parameter:?word}xxx${parameter?word}xxx # Indicate Error if Null or Unset +xxx${parameter:?}xxx${parameter?}xxx # Indicate Error if Null or Unset +xxx${parameter:+word}xxx${parameter+word}xxx # Use Alternative Value + +xxx${#parameter}xxx # String Length +xxx${parameter%word}xxx # Remove Smallest Suffix Pattern +xxx${parameter%%word}xxx # Remove Largest Suffix Pattern +xxx${parameter#word}xxx # Remove Smallest Prefix Pattern +xxx${parameter##word}xxx # Remove Largest Prefix Pattern + +xxx${x:-$(ls)}xxx +xxx${posix:?}xxx +xxx${3:+posix}xxx +xxx${#HOME}xxx +xxx${x%.c}.oxxx +xxx${x#$HOME}xxx +xxx${x##*/}xxx +xxx${x#*}xxx +xxx${x#"*"}xxx diff --git a/tests/syntax-highlighting/file.spec b/tests/syntax-highlighting/file.spec new file mode 100644 index 0000000..c8a6398 --- /dev/null +++ b/tests/syntax-highlighting/file.spec @@ -0,0 +1,105 @@ +# +# gtksourceview.spec +# + +%define api_version 1.0 +%define lib_major 0 +%define lib_name %mklibname %{name}- %{api_version} %{lib_major} + +Summary: Source code viewing library +Name: gtksourceview +Version: 1.7.2 +Release: %mkrel 1 +License: GPL +Group: Editors +URL: http://people.ecsc.co.uk/~matt/downloads/rpms/gtksourceview/ +Source0: https://download.gnome.org/sources/%{name}/%{name}-%{version}.tar.xz +BuildRoot: %{_tmppath}/%{name}-%{version} +BuildRequires: libgtk+2-devel >= 2.3.0 +BuildRequires: libgnome-vfs2-devel >= 2.2.0 +BuildRequires: libgnomeprintui-devel >= 2.7.0 +BuildRequires: perl-XML-Parser +Conflicts: gtksourceview-sharp <= 0.5-3mdk + +%description +GtkSourceview is a library that adds syntax highlighting, +line numbers, and other programming-editor features. +GtkSourceView specializes these features for a code editor. + +%package -n %{lib_name} +Summary: Source code viewing library +Group: Editors +Requires: %{name} >= %{version}-%{release} +Provides: lib%{name} = %{version}-%{release} +Provides: libgtksourceview0 = %{version}-%{release} +Obsoletes: libgtksourceview0 +Provides: libgtksourceview1.0 = %{version}-%{release} +Obsoletes: libgtksourceview1.0 + +%description -n %{lib_name} +GtkSourceview is a library that adds syntax highlighting, +line numbers, and other programming-editor features. +GtkSourceView specializes these features for a code editor. + +%package -n %{lib_name}-devel +Summary: Libraries and include files for GtkSourceView +Group: Development/GNOME and GTK+ +Requires: %{lib_name} = %{version} +Provides: %{name}-devel = %{version}-%{release} +Provides: lib%{name}-devel = %{version}-%{release} +Provides: lib%{name}-%{api_version}-devel = %{version}-%{release} +Provides: libgtksourceview0-devel = %{version}-%{release} +Obsoletes: libgtksourceview0-devel +Provides: libgtksourceview1.0-devel = %{version}-%{release} +Obsoletes: libgtksourceview1.0-devel + +%description -n %{lib_name}-devel +GtkSourceView development files + + +%prep +%setup -q + +%build + +%configure2_5x + +%make + +%install +rm -rf %{buildroot} + +%makeinstall_std + +%{find_lang} %{name}-%{api_version} + +%post -n %{lib_name} -p /sbin/ldconfig + +%postun -n %{lib_name} -p /sbin/ldconfig + +%clean +rm -rf %{buildroot} + +%files -f %{name}-%{api_version}.lang +%defattr(-,root,root) +%doc AUTHORS ChangeLog NEWS README TODO +%{_datadir}/gtksourceview-%{api_version} + +%files -n %{lib_name} +%defattr(-,root,root) +%{_libdir}/*.so.* + +%files -n %{lib_name}-devel +%defattr(-,root,root) +%doc %{_datadir}/gtk-doc/html/gtksourceview +%{_libdir}/*.so +%attr(644,root,root) %{_libdir}/*.la +%{_includedir}/* +%{_libdir}/pkgconfig/* + +%changelog +* Tue Aug 08 2006 Götz Waschk 1.7.2-1mdv2007.0 +- New release 1.7.2 + +* Tue Jul 25 2006 Götz Waschk 1.7.1-1mdk +- New release 1.7.1 diff --git a/tests/syntax-highlighting/file.svh b/tests/syntax-highlighting/file.svh new file mode 100644 index 0000000..84f48fe --- /dev/null +++ b/tests/syntax-highlighting/file.svh @@ -0,0 +1,46 @@ +class my_class extends some_class; + + // This is a comment. + /* This is also a comment, but it containts keywords: bit string, etc */ + + // Some types. + string my_string = "This is a string"; + bit [3:0] my_bits = 4'b0z1x; + integer my_integer = 32'h0z2ab43x; + real my_real = 1.2124155e-123; + shortreal my_shortreal = -0.1111e1; + int my_int = 53152462; + + extern function bit + my_function( + int unsigned something); + +endclass : my_class + +function bit + my_class::my_function( + int unsigned something); + + /* Display a string. + * + * This is a slightly awkward string as it has + * special characters and line continuations. + */ + ("Display a string that continues over multiple lines and contains special characters: \n \t \" \'"); + + // Use a system task. + my_int = (my_bits); + + // (); // Commenting a system task. + // my_function(); // Commenting a function. + +endfunction my_function + +program test(); + + my_class c; + + c = new(); + c.my_function(3); + +endprogram : test diff --git a/tests/syntax-highlighting/file.t2t b/tests/syntax-highlighting/file.t2t new file mode 100644 index 0000000..fa290ae --- /dev/null +++ b/tests/syntax-highlighting/file.t2t @@ -0,0 +1,8 @@ +! gtk-source-lang: t2t + +%!include ``something`` +% Comment +``verbatim`` //italic// +``` +verbatim block +``` diff --git a/tests/syntax-highlighting/file.tera b/tests/syntax-highlighting/file.tera new file mode 100644 index 0000000..be0ddd7 --- /dev/null +++ b/tests/syntax-highlighting/file.tera @@ -0,0 +1,15 @@ +{% extends "master" %} + +{% set_global number = 1.2 + 4 %} + + + {% import "macros.tera" as macros %} + {# Comment #} + {{ macros::input(label="Name", type="text") }} + + {% set result = call_function() %} + + {{ type|first }} + +

{{ value|join(sep=",") }}

+ diff --git a/tests/syntax-highlighting/file.testv1 b/tests/syntax-highlighting/file.testv1 new file mode 100644 index 0000000..3636ac1 --- /dev/null +++ b/tests/syntax-highlighting/file.testv1 @@ -0,0 +1,9 @@ +// gtk-source-lang: testv1 +// comment +/* comment! */ +"A string" +'And a string too' +bambom - keyword, Others +bumbam - keyword, Others2 +kwkw - keyword, Keyword +Numbers: 0.1 1234 0233 diff --git a/tests/syntax-highlighting/file.tex b/tests/syntax-highlighting/file.tex new file mode 100644 index 0000000..46bffee --- /dev/null +++ b/tests/syntax-highlighting/file.tex @@ -0,0 +1,4 @@ +\documentclass{article} +\begin{document} +Hi there! +\end{document} diff --git a/tests/syntax-highlighting/file.texi b/tests/syntax-highlighting/file.texi new file mode 100644 index 0000000..f056eeb --- /dev/null +++ b/tests/syntax-highlighting/file.texi @@ -0,0 +1,51 @@ +\input texinfo +@setfilename manual +@settitle manual + +@titlepage +@title manual + +@c The following two commands start the copyright page. +@page +@vskip 0pt plus 1filll +@insertcopying +@end titlepage + +@c Output the table of contents at the beginning. +@contents + +@ifnottex +@node Top +@top manual +@insertcopying +@end ifnottex + +@menu +* MooScript:: MooScript - builtin scripting language. +* Index:: Index. +@end menu + +@node MooScript +@chapter MooScript + +@cindex chapter, first + +This is the first chapter. +@cindex index entry, another + +Here is a numbered list. + +@enumerate +@item +This is the first item. + +@item +This is the second item. +@end enumerate + +@node Index +@unnumbered Index + +@printindex cp + +@bye diff --git a/tests/syntax-highlighting/file.toml b/tests/syntax-highlighting/file.toml new file mode 100644 index 0000000..902a1ae --- /dev/null +++ b/tests/syntax-highlighting/file.toml @@ -0,0 +1,47 @@ +# comment + +[table] +key = "value - #" # " comment " +lines = ''' +multi +lines +''' + +[tabel] #comment +date = 1979-05-27T00:32:00.999999-07:00 #date +int = 1_000 +float = 6.626e-34 + +hex = 0xDEADBEEF +oct = 0o012345 +bin = 0b11010110 +inf = inf # positive infinity + + [[more.complex."array#"]] + "key" = "text" + multi_line_array = [ + "]", + # ] commmet + ] + + +="no key name" #not allowed +[...fasd...] # INVALID +[a.] # INVALID +[a..b] # INVALID +[.b] # INVALID +[.] # INVALID + + +[error] if you didn't catch this, your parser is broken +key = # INVALID + +string = "after value error" like this + +array = [ + "This might most likely happen in multiline arrays", + Like here, + "or here, + and here" + ] End of array comment, forgot the # +number = 3.14 pi <--again forgot the # \ No newline at end of file diff --git a/tests/syntax-highlighting/file.xml b/tests/syntax-highlighting/file.xml new file mode 100644 index 0000000..e6b4d46 --- /dev/null +++ b/tests/syntax-highlighting/file.xml @@ -0,0 +1,4 @@ + + + momomomo + diff --git a/tests/syntax-highlighting/file.y b/tests/syntax-highlighting/file.y new file mode 100644 index 0000000..bd0f198 --- /dev/null +++ b/tests/syntax-highlighting/file.y @@ -0,0 +1,58 @@ +%{ +#include +#define FOO_BAR(x,y) printf ("x, y") +%} + +%name-prefix="foolala" +%error-verbose +%lex-param {FooLaLa *lala} +%parse-param {FooLaLa *lala} +/* %expect 1 */ + +%union { + int ival; + const char *str; +} + +%token ATOKEN +%token ATOKEN2 + +%type program stmt +%type if_stmt + +%token IF THEN ELSE ELIF FI +%token WHILE DO OD FOR IN +%token CONTINUE BREAK RETURN +%token EQ NEQ LE GE +%token AND OR NOT +%token UMINUS +%token TWODOTS + +%left '-' '+' +%left '*' '/' +%left '%' +%left EQ NEQ '<' '>' GE LE +%left OR +%left AND +%left NOT +%left '#' +%left UMINUS + +%% + +script: program { _ms_parser_set_top_node (parser, $1); } +; + +program: stmt_or_error { $$ = node_list_add (parser, NULL, $1234); } + | program stmt_or_error { $$ = node_list_add (parser, MS_NODE_LIST ($1), $2); } +; + +stmt_or_error: + error ';' { $$ = NULL; } + | stmt ';' { $$ = ; } +; + +variable: IDENTIFIER { $$ = node_var (parser, $1); } +; + +%% diff --git a/tests/syntax-highlighting/gtkrc b/tests/syntax-highlighting/gtkrc new file mode 100644 index 0000000..417ef55 --- /dev/null +++ b/tests/syntax-highlighting/gtkrc @@ -0,0 +1,9 @@ +# -- THEME AUTO-WRITTEN DO NOT EDIT +include "/usr/share/themes/Clearlooks/gtk-2.0/gtkrc" +style "user-font" +{ + font_name="Tahoma 11" +} +widget_class "*" style "user-font" +include "/home/muntyan/.gtkrc-2.0.mine" +# -- THEME AUTO-WRITTEN DO NOT EDIT diff --git a/tests/syntax-highlighting/meson.build b/tests/syntax-highlighting/meson.build new file mode 100644 index 0000000..912447f --- /dev/null +++ b/tests/syntax-highlighting/meson.build @@ -0,0 +1,9 @@ +project('gtksourceview', 'c') +glib = dependency('glib-2.0') +executable( + 'hello', + sources : [ + 'hello.c', + ], + dependencies : glib, +) diff --git a/tests/test-completion.c b/tests/test-completion.c new file mode 100644 index 0000000..8d9ae99 --- /dev/null +++ b/tests/test-completion.c @@ -0,0 +1,472 @@ +/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8; coding: utf-8 -*- + * test-completion.c + * This file is part of GtkSourceView + * + * Copyright (C) 2007 - Jesús Barbero Rodríguez + * Copyright (C) 2013 - Sébastien Wilmet + * + * GtkSourceView is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * GtkSourceView is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include + +typedef struct _TestProvider TestProvider; +typedef struct _TestProviderClass TestProviderClass; + +static GtkSourceCompletionWords *word_provider; +static TestProvider *fixed_provider; +static TestProvider *random_provider; + +struct _TestProvider +{ + GObject parent; + + GList *proposals; + gint priority; + gchar *name; + + GdkPixbuf *provider_icon; + + GdkPixbuf *item_icon; + GIcon *item_gicon; + + /* If it's a random provider, a subset of 'proposals' are choosen on + * each populate. Otherwise, all the proposals are shown. */ + guint is_random : 1; +}; + +struct _TestProviderClass +{ + GObjectClass parent_class; +}; + +static void test_provider_iface_init (GtkSourceCompletionProviderIface *iface); +GType test_provider_get_type (void); + +G_DEFINE_TYPE_WITH_CODE (TestProvider, + test_provider, + G_TYPE_OBJECT, + G_IMPLEMENT_INTERFACE (GTK_SOURCE_TYPE_COMPLETION_PROVIDER, + test_provider_iface_init)) + +static gchar * +test_provider_get_name (GtkSourceCompletionProvider *provider) +{ + return g_strdup (((TestProvider *)provider)->name); +} + +static gint +test_provider_get_priority (GtkSourceCompletionProvider *provider) +{ + return ((TestProvider *)provider)->priority; +} + +static GList * +select_random_proposals (GList *all_proposals) +{ + GList *selection = NULL; + GList *prop; + + for (prop = all_proposals; prop != NULL; prop = g_list_next (prop)) + { + if (g_random_boolean ()) + { + selection = g_list_prepend (selection, prop->data); + } + } + + return selection; +} + +static void +test_provider_populate (GtkSourceCompletionProvider *completion_provider, + GtkSourceCompletionContext *context) +{ + TestProvider *provider = (TestProvider *)completion_provider; + GList *proposals; + + if (provider->is_random) + { + proposals = select_random_proposals (provider->proposals); + } + else + { + proposals = provider->proposals; + } + + gtk_source_completion_context_add_proposals (context, + completion_provider, + proposals, + TRUE); +} + +static GdkPixbuf * +test_provider_get_icon (GtkSourceCompletionProvider *provider) +{ + TestProvider *tp = (TestProvider *)provider; + + return tp->is_random ? NULL : tp->provider_icon; +} + +static void +test_provider_iface_init (GtkSourceCompletionProviderIface *iface) +{ + iface->get_name = test_provider_get_name; + iface->populate = test_provider_populate; + iface->get_priority = test_provider_get_priority; + iface->get_icon = test_provider_get_icon; +} + +static void +test_provider_dispose (GObject *gobject) +{ + TestProvider *self = (TestProvider *)gobject; + + g_list_free_full (self->proposals, g_object_unref); + self->proposals = NULL; + + g_clear_object (&self->provider_icon); + g_clear_object (&self->item_icon); + g_clear_object (&self->item_gicon); + + G_OBJECT_CLASS (test_provider_parent_class)->dispose (gobject); +} + +static void +test_provider_finalize (GObject *gobject) +{ + TestProvider *self = (TestProvider *)gobject; + + g_free (self->name); + self->name = NULL; + + G_OBJECT_CLASS (test_provider_parent_class)->finalize (gobject); +} + +static void +test_provider_class_init (TestProviderClass *klass) +{ + GObjectClass *gobject_class = G_OBJECT_CLASS (klass); + + gobject_class->dispose = test_provider_dispose; + gobject_class->finalize = test_provider_finalize; +} + +static void +test_provider_init (TestProvider *self) +{ + GtkIconTheme *theme; + GIcon *icon; + GIcon *emblem_icon; + GEmblem *emblem; + + theme = gtk_icon_theme_get_default (); + self->provider_icon = gtk_icon_theme_load_icon (theme, "dialog-information", 16, 0, NULL); + + self->item_icon = gtk_icon_theme_load_icon (theme, "trophy-gold", 16, 0, NULL); + + icon = g_themed_icon_new ("trophy-silver"); + emblem_icon = g_themed_icon_new ("emblem-urgent"); + emblem = g_emblem_new (emblem_icon); + self->item_gicon = g_emblemed_icon_new (icon, emblem); + g_object_unref (icon); + g_object_unref (emblem_icon); + g_object_unref (emblem); +} + +static void +test_provider_set_fixed (TestProvider *provider, + gint nb_proposals) +{ + GtkSourceCompletionItem *item; + GList *proposals = NULL; + gint i; + + g_list_free_full (provider->proposals, g_object_unref); + + item = gtk_source_completion_item_new2 (); + gtk_source_completion_item_set_markup (item, "A very long proposal. I repeat, a very long proposal!"); + gtk_source_completion_item_set_text (item, "A very long proposal. I repeat, a very long proposal!"); + gtk_source_completion_item_set_icon (item, provider->item_icon); + gtk_source_completion_item_set_info (item, "To test the horizontal scrollbar and the markup."); + proposals = g_list_prepend (proposals, item); + + item = gtk_source_completion_item_new2 (); + gtk_source_completion_item_set_markup (item, "A proposal with a symbolic icon"); + gtk_source_completion_item_set_text (item, "Test setting the icon-name property"); + gtk_source_completion_item_set_icon_name (item, "face-cool-symbolic"); + proposals = g_list_prepend (proposals, item); + + item = gtk_source_completion_item_new2 (); + gtk_source_completion_item_set_markup (item, "A proposal with an emblem GIcon"); + gtk_source_completion_item_set_text (item, "Test setting the GIcon property"); + gtk_source_completion_item_set_gicon (item, provider->item_gicon); + proposals = g_list_prepend (proposals, item); + + for (i = nb_proposals - 1; i > 0; i--) + { + gchar *name = g_strdup_printf ("Proposal %d", i); + + item = gtk_source_completion_item_new2 (); + gtk_source_completion_item_set_label (item, name); + gtk_source_completion_item_set_text (item, name); + gtk_source_completion_item_set_icon (item, provider->item_icon); + gtk_source_completion_item_set_info (item, "The extra info of the proposal.\nA second line."); + proposals = g_list_prepend (proposals, item); + + g_free (name); + } + + provider->proposals = proposals; + provider->is_random = 0; +} + +static void +test_provider_set_random (TestProvider *provider, + gint nb_proposals) +{ + GList *proposals = NULL; + gint i; + + g_list_free_full (provider->proposals, g_object_unref); + + for (i = 0; i < nb_proposals; i++) + { + GtkSourceCompletionItem *item; + gchar *padding = g_strnfill ((i * 3) % 10, 'o'); + gchar *name = g_strdup_printf ("Propo%ssal %d", padding, i); + + item = gtk_source_completion_item_new2 (); + gtk_source_completion_item_set_label (item, name); + gtk_source_completion_item_set_text (item, name); + gtk_source_completion_item_set_icon (item, provider->item_icon); + proposals = g_list_prepend (proposals, item); + + g_free (padding); + g_free (name); + } + + provider->proposals = proposals; + provider->is_random = 1; +} + +static void +add_remove_provider (GtkToggleButton *button, + GtkSourceCompletion *completion, + GtkSourceCompletionProvider *provider) +{ + g_return_if_fail (provider != NULL); + + if (gtk_toggle_button_get_active (button)) + { + gtk_source_completion_add_provider (completion, provider, NULL); + } + else + { + gtk_source_completion_remove_provider (completion, provider, NULL); + } +} + +static void +enable_word_provider_toggled_cb (GtkToggleButton *button, + GtkSourceCompletion *completion) +{ + add_remove_provider (button, + completion, + GTK_SOURCE_COMPLETION_PROVIDER (word_provider)); +} + +static void +enable_fixed_provider_toggled_cb (GtkToggleButton *button, + GtkSourceCompletion *completion) +{ + add_remove_provider (button, + completion, + GTK_SOURCE_COMPLETION_PROVIDER (fixed_provider)); +} + +static void +enable_random_provider_toggled_cb (GtkToggleButton *button, + GtkSourceCompletion *completion) +{ + add_remove_provider (button, + completion, + GTK_SOURCE_COMPLETION_PROVIDER (random_provider)); +} + +static void +nb_proposals_changed_cb (GtkSpinButton *spin_button, + TestProvider *provider) +{ + gint nb_proposals = gtk_spin_button_get_value_as_int (spin_button); + + if (provider->is_random) + { + test_provider_set_random (provider, nb_proposals); + } + else + { + test_provider_set_fixed (provider, nb_proposals); + } +} + +static void +create_completion (GtkSourceView *source_view, + GtkSourceCompletion *completion) +{ + /* Words completion provider */ + word_provider = gtk_source_completion_words_new (NULL, NULL); + + gtk_source_completion_words_register (word_provider, + gtk_text_view_get_buffer (GTK_TEXT_VIEW (source_view))); + + gtk_source_completion_add_provider (completion, + GTK_SOURCE_COMPLETION_PROVIDER (word_provider), + NULL); + + g_object_set (word_provider, "priority", 10, NULL); + + /* Fixed provider: the proposals don't change */ + fixed_provider = g_object_new (test_provider_get_type (), NULL); + test_provider_set_fixed (fixed_provider, 3); + fixed_provider->priority = 5; + fixed_provider->name = g_strdup ("Fixed Provider"); + + gtk_source_completion_add_provider (completion, + GTK_SOURCE_COMPLETION_PROVIDER (fixed_provider), + NULL); + + /* Random provider: the proposals vary on each populate */ + random_provider = g_object_new (test_provider_get_type (), NULL); + test_provider_set_random (random_provider, 10); + random_provider->priority = 1; + random_provider->name = g_strdup ("Random Provider"); + + gtk_source_completion_add_provider (completion, + GTK_SOURCE_COMPLETION_PROVIDER (random_provider), + NULL); +} + +static void +create_window (void) +{ + GtkBuilder *builder; + GError *error = NULL; + GtkWindow *window; + GtkSourceView *source_view; + GtkSourceCompletion *completion; + GtkCheckButton *remember_info_visibility; + GtkCheckButton *select_on_show; + GtkCheckButton *show_headers; + GtkCheckButton *show_icons; + GtkCheckButton *enable_word_provider; + GtkCheckButton *enable_fixed_provider; + GtkCheckButton *enable_random_provider; + GtkSpinButton *nb_fixed_proposals; + GtkSpinButton *nb_random_proposals; + + builder = gtk_builder_new (); + + gtk_builder_add_from_resource (builder, + "/org/gnome/gtksourceview/tests/ui/test-completion.ui", + &error); + + if (error != NULL) + { + g_error ("Impossible to load test-completion.ui: %s", error->message); + } + + window = GTK_WINDOW (gtk_builder_get_object (builder, "window")); + source_view = GTK_SOURCE_VIEW (gtk_builder_get_object (builder, "source_view")); + remember_info_visibility = GTK_CHECK_BUTTON (gtk_builder_get_object (builder, "checkbutton_remember_info_visibility")); + select_on_show = GTK_CHECK_BUTTON (gtk_builder_get_object (builder, "checkbutton_select_on_show")); + show_headers = GTK_CHECK_BUTTON (gtk_builder_get_object (builder, "checkbutton_show_headers")); + show_icons = GTK_CHECK_BUTTON (gtk_builder_get_object (builder, "checkbutton_show_icons")); + enable_word_provider = GTK_CHECK_BUTTON (gtk_builder_get_object (builder, "checkbutton_word_provider")); + enable_fixed_provider = GTK_CHECK_BUTTON (gtk_builder_get_object (builder, "checkbutton_fixed_provider")); + enable_random_provider = GTK_CHECK_BUTTON (gtk_builder_get_object (builder, "checkbutton_random_provider")); + nb_fixed_proposals = GTK_SPIN_BUTTON (gtk_builder_get_object (builder, "spinbutton_nb_fixed_proposals")); + nb_random_proposals = GTK_SPIN_BUTTON (gtk_builder_get_object (builder, "spinbutton_nb_random_proposals")); + + completion = gtk_source_view_get_completion (source_view); + + g_signal_connect (window, + "destroy", + G_CALLBACK (gtk_main_quit), + NULL); + + g_object_bind_property (completion, "remember-info-visibility", + remember_info_visibility, "active", + G_BINDING_SYNC_CREATE | G_BINDING_BIDIRECTIONAL); + + g_object_bind_property (completion, "select-on-show", + select_on_show, "active", + G_BINDING_SYNC_CREATE | G_BINDING_BIDIRECTIONAL); + + g_object_bind_property (completion, "show-headers", + show_headers, "active", + G_BINDING_SYNC_CREATE | G_BINDING_BIDIRECTIONAL); + + g_object_bind_property (completion, "show-icons", + show_icons, "active", + G_BINDING_SYNC_CREATE | G_BINDING_BIDIRECTIONAL); + + create_completion (source_view, completion); + + g_signal_connect (enable_word_provider, + "toggled", + G_CALLBACK (enable_word_provider_toggled_cb), + completion); + + g_signal_connect (enable_fixed_provider, + "toggled", + G_CALLBACK (enable_fixed_provider_toggled_cb), + completion); + + g_signal_connect (enable_random_provider, + "toggled", + G_CALLBACK (enable_random_provider_toggled_cb), + completion); + + g_signal_connect (nb_fixed_proposals, + "value-changed", + G_CALLBACK (nb_proposals_changed_cb), + fixed_provider); + + g_signal_connect (nb_random_proposals, + "value-changed", + G_CALLBACK (nb_proposals_changed_cb), + random_provider); + + g_object_unref (builder); +} + +int +main (int argc, char *argv[]) +{ + gtk_init (&argc, &argv); + + create_window (); + + gtk_main (); + + /* Not really useful, except for debugging memory leaks. */ + g_object_unref (word_provider); + g_object_unref (fixed_provider); + g_object_unref (random_provider); + + return 0; +} diff --git a/tests/test-completion.gresource.xml b/tests/test-completion.gresource.xml new file mode 100644 index 0000000..2225e21 --- /dev/null +++ b/tests/test-completion.gresource.xml @@ -0,0 +1,6 @@ + + + + test-completion.ui + + diff --git a/tests/test-completion.py b/tests/test-completion.py new file mode 100644 index 0000000..041caf1 --- /dev/null +++ b/tests/test-completion.py @@ -0,0 +1,139 @@ +#!/usr/bin/env python + +# WARNING: test-completion.c is more complete and is better maintained. + +import os, os.path +import sys + +from gi.repository import Gio, GObject, Pango, Gtk, GdkPixbuf, Gdk, GtkSource + +class TestProvider(GObject.Object, GtkSource.CompletionProvider): + __gtype_name__ = 'TestProvider' + + def __init__(self): + GObject.Object.__init__(self) + + self.priority = 1 + + theme = Gtk.IconTheme.get_default() + icon = theme.load_icon(Gtk.STOCK_DIALOG_INFO, 16, 0) + + self.proposals = [] + self.proposals.append(GtkSource.CompletionItem.new("Proposal 1", "Proposal 1", icon, "blah 1")) + self.proposals.append(GtkSource.CompletionItem.new("Proposal 2", "Proposal 2", icon, "blah 2")) + self.proposals.append(GtkSource.CompletionItem.new("Proposal 3", "Proposal 3", icon, "blah 3")) + + def do_get_name(self): + return "Test Provider" + + def do_get_priority(self): + return self.priority + + def do_match(self, context): + return True + + def do_populate(self, context): + context.add_proposals(self, self.proposals, True) + + def set_priority(self, priority): + self.priority = priority + +GObject.type_register(TestProvider) + +def create_completion(): + prov_words = GtkSource.CompletionWords.new(None, None) + prov_words.register(view.get_buffer()) + + prov_words.set_property("priority", 10) + + completion.add_provider(prov_words) + + test1 = TestProvider() + completion.add_provider(test1) + + test2 = TestProvider() + completion.add_provider(test2) + test2.set_priority(5) + +def remember_toggled_cb(button, data): + completion.set_property("remember-info-visibility", button.get_active()) + +def select_on_show_toggled_cb(button, data): + completion.set_property("select-on-show", button.get_active()) + +def show_headers_toggled_cb(button, data): + completion.set_property("show-headers", button.get_active()) + +def show_icons_toggled_cb(button, data): + completion.set_property("show-icons", button.get_active()) + +def toggle_active_property(source, dest, name): + value = source.get_property(name) + dest.set_property("active", value) + +def create_window(): + global window + global view + global completion + + window = Gtk.Window() + window.set_title('GtkSourceView Completion Demo') + window.set_icon_name('text-editor') + window.set_default_size(600, 400) + window.connect_after('destroy', _quit) + + vbox = Gtk.VBox() + hbox = Gtk.HBox() + + sw = Gtk.ScrolledWindow(hadjustment=None, + vadjustment=None) + sw.set_shadow_type(Gtk.ShadowType.IN) + + view = GtkSource.View.new() + sw.add(view) + + completion = view.get_completion() + + remember = Gtk.CheckButton.new_with_label("Remember info visibility") + select_on_show = Gtk.CheckButton.new_with_label("Select first on show") + show_headers = Gtk.CheckButton.new_with_label("Show headers") + show_icons = Gtk.CheckButton.new_with_label("Show icons") + + toggle_active_property(completion, remember, "remember-info-visibility") + toggle_active_property(completion, select_on_show, "select-on-show") + toggle_active_property(completion, show_headers, "show-headers") + toggle_active_property(completion, show_icons, "show-icons") + + hbox.pack_start(remember, False, False, 0) + hbox.pack_start(select_on_show, False, False, 0) + hbox.pack_start(show_headers, False, False, 0) + hbox.pack_start(show_icons, False, False, 0) + + vbox.pack_start(sw, True, True, 0) + vbox.pack_end(hbox, False, False, 0) + + window.add(vbox) + + remember.connect("toggled", remember_toggled_cb, None) + select_on_show.connect("toggled", select_on_show_toggled_cb, None) + show_headers.connect("toggled", show_headers_toggled_cb, None) + show_icons.connect("toggled", show_icons_toggled_cb, None) + + return window + +def _quit(*args): + Gtk.main_quit() + +def main(args = []): + + window = create_window() + create_completion() + + window.show_all() + + Gtk.main() + +if __name__ == '__main__': + main(sys.argv) + + diff --git a/tests/test-completion.ui b/tests/test-completion.ui new file mode 100644 index 0000000..4137507 --- /dev/null +++ b/tests/test-completion.ui @@ -0,0 +1,375 @@ + + + + + + 100000 + 3 + 1 + 10 + + + 100000 + 10 + 1 + 10 + + + True + False + + + True + False + 6 + 10 + + + True + False + 5 + + + True + False + 10 + + + Remember info visibility + True + True + False + True + + + 0 + 0 + 1 + 1 + + + + + Select first on show + True + True + False + True + + + 0 + 1 + 1 + 1 + + + + + Show headers + True + True + False + True + + + 0 + 2 + 1 + 1 + + + + + Show icons + True + True + False + True + + + 0 + 3 + 1 + 1 + + + + + 0 + 1 + 1 + 1 + + + + + True + False + start + Providers + + + + + + 0 + 2 + 1 + 1 + + + + + True + False + start + General options + + + + + + 0 + 0 + 1 + 1 + + + + + True + False + 10 + + + Word provider + True + True + False + True + True + + + 0 + 0 + 1 + 1 + + + + + Fixed provider + True + True + False + True + True + + + 0 + 1 + 1 + 1 + + + + + Random provider + True + True + False + True + True + + + 0 + 2 + 1 + 1 + + + + + 0 + 3 + 1 + 1 + + + + + True + False + start + Fixed provider proposals + + + + + + 0 + 4 + 1 + 1 + + + + + True + False + 10 + + + True + False + 5 + + + True + False + Number of proposals: + + + 0 + 0 + 1 + 1 + + + + + True + True + 3 + adjustment1 + 3 + + + 1 + 0 + 1 + 1 + + + + + 0 + 0 + 1 + 1 + + + + + 0 + 5 + 1 + 1 + + + + + True + False + start + Random provider proposals + + + + + + 0 + 6 + 1 + 1 + + + + + True + False + 10 + 5 + + + True + False + Max number of proposals: + + + 0 + 0 + 1 + 1 + + + + + True + True + adjustment2 + 10 + + + 1 + 0 + 1 + 1 + + + + + 0 + 7 + 1 + 1 + + + + + 0 + 0 + 1 + 1 + + + + + 600 + True + True + in + + + True + True + True + True + 2 + 2 + True + True + + + True + + + 3 + + + + + + + + + 1 + 0 + 1 + 1 + + + + + + diff --git a/tests/test-search-performances.c b/tests/test-search-performances.c new file mode 100644 index 0000000..136e0ed --- /dev/null +++ b/tests/test-search-performances.c @@ -0,0 +1,286 @@ +/* + * test-search-performances.c + * This file is part of GtkSourceView + * + * Copyright (C) 2013 - Sébastien Wilmet + * + * GtkSourceView is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * GtkSourceView is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include + +/* This measures the execution times for: + * - basic search: with gtk_text_iter_forward_search(); + * - "smart" search: the first search with gtk_text_iter_forward_search(), later + * searches with gtk_text_iter_forward_to_tag_toggle(); + * - regex search. + * + * For the "smart" search, only the first search is measured. Later searches + * are really fast (going to the previous/next occurrence is done in O(log n)). + * Different search flags are also tested. We can see a big difference between + * the case sensitive search and case insensitive. + */ + +#define NB_LINES 100000 + +static void +on_notify_search_occurrences_count_cb (GtkSourceSearchContext *search_context, + GParamSpec *spec, + GTimer *timer) +{ + g_print ("smart asynchronous search, case sensitive: %lf seconds.\n", + g_timer_elapsed (timer, NULL)); + + gtk_main_quit (); +} + +int +main (int argc, char *argv[]) +{ + GtkSourceBuffer *buffer; + GtkSourceSearchContext *search_context; + GtkSourceSearchSettings *search_settings; + GtkTextIter iter; + GtkTextIter match_end; + GTimer *timer; + gint i; + GtkTextSearchFlags flags; + gchar *regex_pattern; + + gtk_init (&argc, &argv); + + buffer = gtk_source_buffer_new (NULL); + + gtk_text_buffer_get_start_iter (GTK_TEXT_BUFFER (buffer), &iter); + + for (i = 0; i < NB_LINES; i++) + { + gtk_text_buffer_insert (GTK_TEXT_BUFFER (buffer), + &iter, + "A line of text to fill the text buffer. Is it long enough?\n", + -1); + } + + gtk_text_buffer_insert (GTK_TEXT_BUFFER (buffer), &iter, "foo\n", -1); + + /* Basic search, no flags */ + + timer = g_timer_new (); + + gtk_text_buffer_get_start_iter (GTK_TEXT_BUFFER (buffer), &iter); + + flags = 0; + + while (gtk_text_iter_forward_search (&iter, "foo", flags, NULL, &match_end, NULL)) + { + iter = match_end; + } + + g_timer_stop (timer); + g_print ("basic forward search, no flags: %lf seconds.\n", + g_timer_elapsed (timer, NULL)); + + /* Basic search, with flags always enabled by gsv */ + + g_timer_start (timer); + + gtk_text_buffer_get_start_iter (GTK_TEXT_BUFFER (buffer), &iter); + + flags = GTK_TEXT_SEARCH_VISIBLE_ONLY | GTK_TEXT_SEARCH_TEXT_ONLY; + + while (gtk_text_iter_forward_search (&iter, "foo", flags, NULL, &match_end, NULL)) + { + iter = match_end; + } + + g_timer_stop (timer); + g_print ("basic forward search, visible and text only flags: %lf seconds.\n", + g_timer_elapsed (timer, NULL)); + + /* Basic search, with default flags in gsv */ + + g_timer_start (timer); + + gtk_text_buffer_get_start_iter (GTK_TEXT_BUFFER (buffer), &iter); + + flags = GTK_TEXT_SEARCH_VISIBLE_ONLY | + GTK_TEXT_SEARCH_TEXT_ONLY | + GTK_TEXT_SEARCH_CASE_INSENSITIVE; + + while (gtk_text_iter_forward_search (&iter, "foo", flags, NULL, &match_end, NULL)) + { + iter = match_end; + } + + g_timer_stop (timer); + g_print ("basic forward search, all flags: %lf seconds.\n", + g_timer_elapsed (timer, NULL)); + + /* Smart forward search, with default flags in gsv */ + + search_settings = gtk_source_search_settings_new (); + search_context = gtk_source_search_context_new (buffer, search_settings); + + g_timer_start (timer); + + gtk_source_search_settings_set_search_text (search_settings, "foo"); + + gtk_text_buffer_get_start_iter (GTK_TEXT_BUFFER (buffer), &iter); + + while (gtk_source_search_context_forward2 (search_context, &iter, NULL, &match_end, NULL)) + { + iter = match_end; + } + + g_timer_stop (timer); + g_print ("smart synchronous forward search, case insensitive: %lf seconds.\n", + g_timer_elapsed (timer, NULL)); + + /* Smart forward search, case sensitive */ + + g_timer_start (timer); + + gtk_source_search_settings_set_search_text (search_settings, NULL); + gtk_source_search_settings_set_case_sensitive (search_settings, TRUE); + gtk_source_search_settings_set_search_text (search_settings, "foo"); + + gtk_text_buffer_get_start_iter (GTK_TEXT_BUFFER (buffer), &iter); + + while (gtk_source_search_context_forward2 (search_context, &iter, NULL, &match_end, NULL)) + { + iter = match_end; + } + + g_timer_stop (timer); + g_print ("smart synchronous forward search, case sensitive: %lf seconds.\n", + g_timer_elapsed (timer, NULL)); + + /* Regex search: search "foo" */ + + g_timer_start (timer); + + gtk_source_search_settings_set_search_text (search_settings, NULL); + gtk_source_search_settings_set_regex_enabled (search_settings, TRUE); + gtk_source_search_settings_set_search_text (search_settings, "foo"); + + gtk_text_buffer_get_start_iter (GTK_TEXT_BUFFER (buffer), &iter); + + while (gtk_source_search_context_forward2 (search_context, &iter, NULL, &match_end, NULL)) + { + iter = match_end; + } + + g_timer_stop (timer); + g_print ("regex search: 'foo' (no partial matches): %lf seconds.\n", + g_timer_elapsed (timer, NULL)); + + /* Regex search: search "fill" */ + + g_timer_start (timer); + + gtk_source_search_settings_set_search_text (search_settings, "fill"); + + gtk_text_buffer_get_start_iter (GTK_TEXT_BUFFER (buffer), &iter); + + while (gtk_source_search_context_forward2 (search_context, &iter, NULL, &match_end, NULL)) + { + iter = match_end; + } + + g_timer_stop (timer); + g_print ("regex search: 'fill' (no partial matches): %lf seconds.\n", + g_timer_elapsed (timer, NULL)); + + /* Regex search: search single lines */ + + g_timer_start (timer); + + gtk_source_search_settings_set_search_text (search_settings, ".*"); + + gtk_text_buffer_get_start_iter (GTK_TEXT_BUFFER (buffer), &iter); + + while (gtk_source_search_context_forward2 (search_context, &iter, NULL, &match_end, NULL)) + { + iter = match_end; + } + + g_timer_stop (timer); + g_print ("regex search: match single lines (no partial matches): %lf seconds.\n", + g_timer_elapsed (timer, NULL)); + + /* Regex search: search matches of 3 lines */ + + g_timer_start (timer); + + /* The space at the beginning of the pattern permits to not have contiguous + * matches. There is a performance issue with contiguous matches. + */ + gtk_source_search_settings_set_search_text (search_settings, " (.*\n){3}"); + + gtk_text_buffer_get_start_iter (GTK_TEXT_BUFFER (buffer), &iter); + + while (gtk_source_search_context_forward2 (search_context, &iter, NULL, &match_end, NULL)) + { + iter = match_end; + } + + g_timer_stop (timer); + g_print ("regex search: matches of 3 lines (small partial matches): %lf seconds.\n", + g_timer_elapsed (timer, NULL)); + + /* Regex search: search matches of really big chunks */ + + g_timer_start (timer); + + regex_pattern = g_strdup_printf (" (.*\n){%d}", NB_LINES / 10); + gtk_source_search_settings_set_search_text (search_settings, regex_pattern); + g_free (regex_pattern); + + gtk_text_buffer_get_start_iter (GTK_TEXT_BUFFER (buffer), &iter); + + while (gtk_source_search_context_forward2 (search_context, &iter, NULL, &match_end, NULL)) + { + iter = match_end; + } + + g_timer_stop (timer); + g_print ("regex search: 10 matches of %d lines (big partial matches): %lf seconds.\n", + NB_LINES / 10, + g_timer_elapsed (timer, NULL)); + + /* Smart search, case sensitive, asynchronous */ + + /* The asynchronous overhead doesn't depend on the search flags, it + * depends on the maximum number of lines to scan in one batch, and + * (obviously), on the buffer size. + * You can tune SCAN_BATCH_SIZE in gtksourcesearchcontext.c to see a + * difference in the overhead. + */ + + g_signal_connect (search_context, + "notify::occurrences-count", + G_CALLBACK (on_notify_search_occurrences_count_cb), + timer); + + g_timer_start (timer); + + gtk_source_search_settings_set_search_text (search_settings, NULL); + gtk_source_search_settings_set_regex_enabled (search_settings, FALSE); + gtk_source_search_settings_set_search_text (search_settings, "foo"); + + gtk_main (); + return 0; +} diff --git a/tests/test-search.c b/tests/test-search.c new file mode 100644 index 0000000..5c62598 --- /dev/null +++ b/tests/test-search.c @@ -0,0 +1,485 @@ +/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8; coding: utf-8 -*- + * test-search.c + * This file is part of GtkSourceView + * + * Copyright (C) 2013 - Sébastien Wilmet + * + * GtkSourceView is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * GtkSourceView is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include + +#define TEST_TYPE_SEARCH (test_search_get_type ()) +#define TEST_SEARCH(obj) (G_TYPE_CHECK_INSTANCE_CAST ((obj), TEST_TYPE_SEARCH, TestSearch)) +#define TEST_SEARCH_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST ((klass), TEST_TYPE_SEARCH, TestSearchClass)) +#define TEST_IS_SEARCH(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), TEST_TYPE_SEARCH)) +#define TEST_IS_SEARCH_CLASS(klass) (G_TYPE_CHECK_CLASS_TYPE ((klass), TEST_TYPE_SEARCH)) +#define TEST_SEARCH_GET_CLASS(obj) (G_TYPE_INSTANCE_GET_CLASS ((obj), TEST_TYPE_SEARCH, TestSearchClass)) + +typedef struct _TestSearch TestSearch; +typedef struct _TestSearchClass TestSearchClass; +typedef struct _TestSearchPrivate TestSearchPrivate; + +struct _TestSearch +{ + GtkGrid parent; + TestSearchPrivate *priv; +}; + +struct _TestSearchClass +{ + GtkGridClass parent_class; +}; + +struct _TestSearchPrivate +{ + GtkSourceView *source_view; + GtkSourceBuffer *source_buffer; + GtkSourceSearchContext *search_context; + GtkSourceSearchSettings *search_settings; + GtkEntry *replace_entry; + GtkLabel *label_occurrences; + GtkLabel *label_regex_error; + + guint idle_update_label_id; +}; + +GType test_search_get_type (void); + +G_DEFINE_TYPE_WITH_PRIVATE (TestSearch, test_search, GTK_TYPE_GRID) + +static void +open_file (TestSearch *search, + const gchar *filename) +{ + gchar *contents; + GError *error = NULL; + GtkSourceLanguageManager *language_manager; + GtkSourceLanguage *language; + GtkTextIter iter; + + /* In a realistic application you would use GtkSourceFile of course. */ + if (!g_file_get_contents (filename, &contents, NULL, &error)) + { + g_error ("Impossible to load file: %s", error->message); + } + + gtk_text_buffer_set_text (GTK_TEXT_BUFFER (search->priv->source_buffer), + contents, + -1); + + language_manager = gtk_source_language_manager_get_default (); + language = gtk_source_language_manager_get_language (language_manager, "c"); + gtk_source_buffer_set_language (search->priv->source_buffer, language); + + gtk_text_buffer_get_start_iter (GTK_TEXT_BUFFER (search->priv->source_buffer), + &iter); + + gtk_text_buffer_select_range (GTK_TEXT_BUFFER (search->priv->source_buffer), + &iter, + &iter); + + g_free (contents); +} + +static void +update_label_occurrences (TestSearch *search) +{ + gint occurrences_count; + GtkTextIter select_start; + GtkTextIter select_end; + gint occurrence_pos; + gchar *text; + + occurrences_count = gtk_source_search_context_get_occurrences_count (search->priv->search_context); + + gtk_text_buffer_get_selection_bounds (GTK_TEXT_BUFFER (search->priv->source_buffer), + &select_start, + &select_end); + + occurrence_pos = gtk_source_search_context_get_occurrence_position (search->priv->search_context, + &select_start, + &select_end); + + if (occurrences_count == -1) + { + text = g_strdup (""); + } + else if (occurrence_pos == -1) + { + text = g_strdup_printf ("%u occurrences", occurrences_count); + } + else + { + text = g_strdup_printf ("%d of %u", occurrence_pos, occurrences_count); + } + + gtk_label_set_text (search->priv->label_occurrences, text); + g_free (text); +} + +static void +update_label_regex_error (TestSearch *search) +{ + GError *error; + + error = gtk_source_search_context_get_regex_error (search->priv->search_context); + + if (error == NULL) + { + gtk_label_set_text (search->priv->label_regex_error, ""); + gtk_widget_hide (GTK_WIDGET (search->priv->label_regex_error)); + } + else + { + gtk_label_set_text (search->priv->label_regex_error, error->message); + gtk_widget_show (GTK_WIDGET (search->priv->label_regex_error)); + g_clear_error (&error); + } +} + +static void +search_entry_changed_cb (TestSearch *search, + GtkEntry *entry) +{ + const gchar *text = gtk_entry_get_text (entry); + gchar *unescaped_text = gtk_source_utils_unescape_search_text (text); + + gtk_source_search_settings_set_search_text (search->priv->search_settings, unescaped_text); + g_free (unescaped_text); +} + +static void +select_search_occurrence (TestSearch *search, + const GtkTextIter *match_start, + const GtkTextIter *match_end) +{ + GtkTextMark *insert; + + gtk_text_buffer_select_range (GTK_TEXT_BUFFER (search->priv->source_buffer), + match_start, + match_end); + + insert = gtk_text_buffer_get_insert (GTK_TEXT_BUFFER (search->priv->source_buffer)); + + gtk_text_view_scroll_mark_onscreen (GTK_TEXT_VIEW (search->priv->source_view), + insert); +} + +static void +backward_search_finished (GtkSourceSearchContext *search_context, + GAsyncResult *result, + TestSearch *search) +{ + GtkTextIter match_start; + GtkTextIter match_end; + + if (gtk_source_search_context_backward_finish2 (search_context, + result, + &match_start, + &match_end, + NULL, + NULL)) + { + select_search_occurrence (search, &match_start, &match_end); + } +} + +static void +button_previous_clicked_cb (TestSearch *search, + GtkButton *button) +{ + GtkTextIter start_at; + + gtk_text_buffer_get_selection_bounds (GTK_TEXT_BUFFER (search->priv->source_buffer), + &start_at, + NULL); + + gtk_source_search_context_backward_async (search->priv->search_context, + &start_at, + NULL, + (GAsyncReadyCallback)backward_search_finished, + search); +} + +static void +forward_search_finished (GtkSourceSearchContext *search_context, + GAsyncResult *result, + TestSearch *search) +{ + GtkTextIter match_start; + GtkTextIter match_end; + + if (gtk_source_search_context_forward_finish2 (search_context, + result, + &match_start, + &match_end, + NULL, + NULL)) + { + select_search_occurrence (search, &match_start, &match_end); + } +} + +static void +button_next_clicked_cb (TestSearch *search, + GtkButton *button) +{ + GtkTextIter start_at; + + gtk_text_buffer_get_selection_bounds (GTK_TEXT_BUFFER (search->priv->source_buffer), + NULL, + &start_at); + + gtk_source_search_context_forward_async (search->priv->search_context, + &start_at, + NULL, + (GAsyncReadyCallback)forward_search_finished, + search); +} + +static void +button_replace_clicked_cb (TestSearch *search, + GtkButton *button) +{ + GtkTextIter match_start; + GtkTextIter match_end; + GtkTextIter iter; + GtkEntryBuffer *entry_buffer; + gint replace_length; + + gtk_text_buffer_get_selection_bounds (GTK_TEXT_BUFFER (search->priv->source_buffer), + &match_start, + &match_end); + + entry_buffer = gtk_entry_get_buffer (search->priv->replace_entry); + replace_length = gtk_entry_buffer_get_bytes (entry_buffer); + + gtk_source_search_context_replace2 (search->priv->search_context, + &match_start, + &match_end, + gtk_entry_get_text (search->priv->replace_entry), + replace_length, + NULL); + + gtk_text_buffer_get_selection_bounds (GTK_TEXT_BUFFER (search->priv->source_buffer), + NULL, + &iter); + + gtk_source_search_context_forward_async (search->priv->search_context, + &iter, + NULL, + (GAsyncReadyCallback)forward_search_finished, + search); +} + +static void +button_replace_all_clicked_cb (TestSearch *search, + GtkButton *button) +{ + GtkEntryBuffer *entry_buffer = gtk_entry_get_buffer (search->priv->replace_entry); + gint replace_length = gtk_entry_buffer_get_bytes (entry_buffer); + + gtk_source_search_context_replace_all (search->priv->search_context, + gtk_entry_get_text (search->priv->replace_entry), + replace_length, + NULL); +} + +static gboolean +update_label_idle_cb (TestSearch *search) +{ + search->priv->idle_update_label_id = 0; + + update_label_occurrences (search); + + return G_SOURCE_REMOVE; +} + +static void +mark_set_cb (GtkTextBuffer *buffer, + GtkTextIter *location, + GtkTextMark *mark, + TestSearch *search) +{ + GtkTextMark *insert; + GtkTextMark *selection_bound; + + insert = gtk_text_buffer_get_insert (buffer); + selection_bound = gtk_text_buffer_get_selection_bound (buffer); + + if ((mark == insert || mark == selection_bound) && + search->priv->idle_update_label_id == 0) + { + search->priv->idle_update_label_id = g_idle_add ((GSourceFunc)update_label_idle_cb, + search); + } +} + +static void +highlight_toggled_cb (TestSearch *search, + GtkToggleButton *button) +{ + gtk_source_search_context_set_highlight (search->priv->search_context, + gtk_toggle_button_get_active (button)); +} + +static void +match_case_toggled_cb (TestSearch *search, + GtkToggleButton *button) +{ + gtk_source_search_settings_set_case_sensitive (search->priv->search_settings, + gtk_toggle_button_get_active (button)); +} + +static void +at_word_boundaries_toggled_cb (TestSearch *search, + GtkToggleButton *button) +{ + gtk_source_search_settings_set_at_word_boundaries (search->priv->search_settings, + gtk_toggle_button_get_active (button)); +} + +static void +wrap_around_toggled_cb (TestSearch *search, + GtkToggleButton *button) +{ + gtk_source_search_settings_set_wrap_around (search->priv->search_settings, + gtk_toggle_button_get_active (button)); +} + +static void +regex_toggled_cb (TestSearch *search, + GtkToggleButton *button) +{ + gtk_source_search_settings_set_regex_enabled (search->priv->search_settings, + gtk_toggle_button_get_active (button)); +} + +static void +test_search_dispose (GObject *object) +{ + TestSearch *search = TEST_SEARCH (object); + + g_clear_object (&search->priv->source_buffer); + g_clear_object (&search->priv->search_context); + g_clear_object (&search->priv->search_settings); + + G_OBJECT_CLASS (test_search_parent_class)->dispose (object); +} + +static void +test_search_class_init (TestSearchClass *klass) +{ + GObjectClass *object_class = G_OBJECT_CLASS (klass); + GtkWidgetClass *widget_class = GTK_WIDGET_CLASS (klass); + + object_class->dispose = test_search_dispose; + + gtk_widget_class_set_template_from_resource (widget_class, + "/org/gnome/gtksourceview/tests/ui/test-search.ui"); + + gtk_widget_class_bind_template_child_private (widget_class, TestSearch, source_view); + gtk_widget_class_bind_template_child_private (widget_class, TestSearch, replace_entry); + gtk_widget_class_bind_template_child_private (widget_class, TestSearch, label_occurrences); + gtk_widget_class_bind_template_child_private (widget_class, TestSearch, label_regex_error); + + gtk_widget_class_bind_template_callback (widget_class, search_entry_changed_cb); + gtk_widget_class_bind_template_callback (widget_class, button_previous_clicked_cb); + gtk_widget_class_bind_template_callback (widget_class, button_next_clicked_cb); + gtk_widget_class_bind_template_callback (widget_class, button_replace_clicked_cb); + gtk_widget_class_bind_template_callback (widget_class, button_replace_all_clicked_cb); + + /* It is also possible to bind the properties with + * g_object_bind_property(), between the check buttons and the source + * buffer. But GtkBuilder and Glade don't support that yet. + */ + gtk_widget_class_bind_template_callback (widget_class, highlight_toggled_cb); + gtk_widget_class_bind_template_callback (widget_class, match_case_toggled_cb); + gtk_widget_class_bind_template_callback (widget_class, at_word_boundaries_toggled_cb); + gtk_widget_class_bind_template_callback (widget_class, wrap_around_toggled_cb); + gtk_widget_class_bind_template_callback (widget_class, regex_toggled_cb); +} + +static void +test_search_init (TestSearch *search) +{ + search->priv = test_search_get_instance_private (search); + + gtk_widget_init_template (GTK_WIDGET (search)); + + search->priv->source_buffer = GTK_SOURCE_BUFFER ( + gtk_text_view_get_buffer (GTK_TEXT_VIEW (search->priv->source_view))); + + g_object_ref (search->priv->source_buffer); + + open_file (search, TOP_SRCDIR "/gtksourceview/gtksourcesearchcontext.c"); + + search->priv->search_settings = gtk_source_search_settings_new (); + + search->priv->search_context = gtk_source_search_context_new (search->priv->source_buffer, + search->priv->search_settings); + + g_signal_connect_swapped (search->priv->search_context, + "notify::occurrences-count", + G_CALLBACK (update_label_occurrences), + search); + + g_signal_connect (search->priv->source_buffer, + "mark-set", + G_CALLBACK (mark_set_cb), + search); + + g_signal_connect_swapped (search->priv->search_context, + "notify::regex-error", + G_CALLBACK (update_label_regex_error), + search); + + update_label_regex_error (search); +} + +static TestSearch * +test_search_new (void) +{ + return g_object_new (test_search_get_type (), NULL); +} + +gint +main (gint argc, gchar *argv[]) +{ + GtkWidget *window; + TestSearch *search; + + gtk_init (&argc, &argv); + + window = gtk_window_new (GTK_WINDOW_TOPLEVEL); + + gtk_window_set_default_size (GTK_WINDOW (window), 700, 500); + + g_signal_connect (window, + "destroy", + G_CALLBACK (gtk_main_quit), + NULL); + + search = test_search_new (); + gtk_container_add (GTK_CONTAINER (window), GTK_WIDGET (search)); + + gtk_widget_show (window); + + gtk_main (); + + return 0; +} diff --git a/tests/test-search.gresource.xml b/tests/test-search.gresource.xml new file mode 100644 index 0000000..8cfee5b --- /dev/null +++ b/tests/test-search.gresource.xml @@ -0,0 +1,6 @@ + + + + test-search.ui + + diff --git a/tests/test-search.ui b/tests/test-search.ui new file mode 100644 index 0000000..b822e96 --- /dev/null +++ b/tests/test-search.ui @@ -0,0 +1,345 @@ + + + + + + True + False + go-up + 1 + + + True + False + go-down + 1 + + + True + False + edit-find-replace + 1 + + + True + False + edit-find-replace + 1 + + + diff --git a/tests/test-space-drawing.c b/tests/test-space-drawing.c new file mode 100644 index 0000000..cf85b44 --- /dev/null +++ b/tests/test-space-drawing.c @@ -0,0 +1,159 @@ +/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8; coding: utf-8 -*- + * test-space-drawing.c + * This file is part of GtkSourceView + * + * Copyright (C) 2015 - Université Catholique de Louvain + * + * GtkSourceView is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * GtkSourceView is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Sébastien Wilmet + */ + +#include + +static void +fill_buffer (GtkTextBuffer *buffer, + GtkTextTag *tag) +{ + GtkTextIter iter; + + gtk_text_buffer_set_text (buffer, "", 0); + + gtk_text_buffer_get_start_iter (buffer, &iter); + gtk_text_buffer_insert (buffer, &iter, + "---\n" + "\tText without draw-spaces tag.\n" + "\tNon-breaking whitespace: .\n" + "\tTrailing spaces.\t  \n" + "---\n\n", + -1); + + gtk_text_buffer_insert_with_tags (buffer, &iter, + "---\n" + "\tText with draw-spaces tag.\n" + "\tNon-breaking whitespace: .\n" + "\tTrailing spaces.\t  \n" + "---", + -1, + tag, + NULL); +} + +static void +create_window (void) +{ + GtkWidget *window; + GtkWidget *hgrid; + GtkWidget *panel_grid; + GtkWidget *scrolled_window; + GtkWidget *matrix_checkbutton; + GtkWidget *tag_set_checkbutton; + GtkWidget *tag_checkbutton; + GtkWidget *implicit_trailing_newline_checkbutton; + GtkSourceView *view; + GtkSourceBuffer *buffer; + GtkTextTag *tag; + GtkSourceSpaceDrawer *space_drawer; + + window = gtk_window_new (GTK_WINDOW_TOPLEVEL); + gtk_window_set_default_size (GTK_WINDOW (window), 800, 600); + g_signal_connect (window, "destroy", gtk_main_quit, NULL); + + hgrid = gtk_grid_new (); + gtk_orientable_set_orientation (GTK_ORIENTABLE (hgrid), GTK_ORIENTATION_HORIZONTAL); + + view = GTK_SOURCE_VIEW (gtk_source_view_new ()); + + g_object_set (view, + "expand", TRUE, + NULL); + + gtk_text_view_set_monospace (GTK_TEXT_VIEW (view), TRUE); + + buffer = GTK_SOURCE_BUFFER (gtk_text_view_get_buffer (GTK_TEXT_VIEW (view))); + + tag = gtk_source_buffer_create_source_tag (buffer, + NULL, + "draw-spaces", FALSE, + NULL); + + fill_buffer (GTK_TEXT_BUFFER (buffer), tag); + + space_drawer = gtk_source_view_get_space_drawer (view); + gtk_source_space_drawer_set_types_for_locations (space_drawer, + GTK_SOURCE_SPACE_LOCATION_ALL, + GTK_SOURCE_SPACE_TYPE_NBSP); + gtk_source_space_drawer_set_types_for_locations (space_drawer, + GTK_SOURCE_SPACE_LOCATION_TRAILING, + GTK_SOURCE_SPACE_TYPE_ALL); + + panel_grid = gtk_grid_new (); + gtk_orientable_set_orientation (GTK_ORIENTABLE (panel_grid), GTK_ORIENTATION_VERTICAL); + gtk_container_add (GTK_CONTAINER (hgrid), panel_grid); + + gtk_grid_set_row_spacing (GTK_GRID (panel_grid), 6); + g_object_set (panel_grid, + "margin", 6, + NULL); + + matrix_checkbutton = gtk_check_button_new_with_label ("GtkSourceSpaceDrawer enable-matrix"); + gtk_container_add (GTK_CONTAINER (panel_grid), matrix_checkbutton); + gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (matrix_checkbutton), TRUE); + g_object_bind_property (matrix_checkbutton, "active", + space_drawer, "enable-matrix", + G_BINDING_BIDIRECTIONAL | G_BINDING_SYNC_CREATE); + + tag_set_checkbutton = gtk_check_button_new_with_label ("GtkSourceTag draw-spaces-set"); + gtk_container_add (GTK_CONTAINER (panel_grid), tag_set_checkbutton); + gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (tag_set_checkbutton), TRUE); + g_object_bind_property (tag_set_checkbutton, "active", + tag, "draw-spaces-set", + G_BINDING_BIDIRECTIONAL | G_BINDING_SYNC_CREATE); + + tag_checkbutton = gtk_check_button_new_with_label ("GtkSourceTag draw-spaces"); + gtk_container_add (GTK_CONTAINER (panel_grid), tag_checkbutton); + gtk_toggle_button_set_active (GTK_TOGGLE_BUTTON (tag_checkbutton), FALSE); + g_object_bind_property (tag_checkbutton, "active", + tag, "draw-spaces", + G_BINDING_BIDIRECTIONAL | G_BINDING_SYNC_CREATE); + + implicit_trailing_newline_checkbutton = gtk_check_button_new_with_label ("Implicit trailing newline"); + gtk_widget_set_margin_top (implicit_trailing_newline_checkbutton, 12); + gtk_container_add (GTK_CONTAINER (panel_grid), implicit_trailing_newline_checkbutton); + g_object_bind_property (buffer, "implicit-trailing-newline", + implicit_trailing_newline_checkbutton, "active", + G_BINDING_BIDIRECTIONAL | G_BINDING_SYNC_CREATE); + + scrolled_window = gtk_scrolled_window_new (NULL, NULL); + gtk_container_add (GTK_CONTAINER (scrolled_window), GTK_WIDGET (view)); + gtk_container_add (GTK_CONTAINER (hgrid), scrolled_window); + + gtk_container_add (GTK_CONTAINER (window), hgrid); + + gtk_widget_show_all (window); +} + +gint +main (gint argc, + gchar **argv) +{ + gtk_init (&argc, &argv); + + create_window (); + + gtk_main (); + + return 0; +} diff --git a/tests/test-undo-manager-performances.c b/tests/test-undo-manager-performances.c new file mode 100644 index 0000000..c08a6af --- /dev/null +++ b/tests/test-undo-manager-performances.c @@ -0,0 +1,104 @@ +/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8; coding: utf-8 -*- */ +/* test-undo-manager-performances.c + * This file is part of GtkSourceView + * + * Copyright (C) 2014 - Sébastien Wilmet + * + * GtkSourceView is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * GtkSourceView is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +#define NB_LINES 100000 + +/* Returns the number of undo's. */ +static gint +test_undo_redo (GtkSourceBuffer *buffer, + gint max_actions) +{ + gint nb_actions; + gint i; + + for (nb_actions = 0; nb_actions < max_actions; nb_actions++) + { + if (gtk_source_buffer_can_undo (buffer)) + { + gtk_source_buffer_undo (buffer); + } + else + { + break; + } + } + + for (i = 0; i < nb_actions; i++) + { + g_assert (gtk_source_buffer_can_redo (buffer)); + gtk_source_buffer_redo (buffer); + } + + return nb_actions; +} + +gint +main (gint argc, + gchar **argv) +{ + GtkSourceBuffer *source_buffer; + GtkTextBuffer *text_buffer; + GtkTextIter iter; + GTimer *timer; + gint nb_actions; + gint i; + + gtk_init (&argc, &argv); + + source_buffer = gtk_source_buffer_new (NULL); + text_buffer = GTK_TEXT_BUFFER (source_buffer); + + gtk_text_buffer_get_start_iter (text_buffer, &iter); + + for (i = 0; i < NB_LINES; i++) + { + gtk_text_buffer_begin_user_action (text_buffer); + + gtk_text_buffer_insert (text_buffer, + &iter, + "A line of text to fill the text buffer. Is it long enough?\n", + -1); + + gtk_text_buffer_end_user_action (text_buffer); + } + + timer = g_timer_new (); + nb_actions = test_undo_redo (source_buffer, NB_LINES / 10); + g_timer_stop (timer); + + g_print ("Undo/Redo %d actions: %lf seconds.\n", + nb_actions, + g_timer_elapsed (timer, NULL)); + + g_timer_start (timer); + nb_actions = test_undo_redo (source_buffer, NB_LINES); + g_timer_stop (timer); + + g_print ("Undo/Redo %d actions: %lf seconds.\n", + nb_actions, + g_timer_elapsed (timer, NULL)); + + g_object_unref (source_buffer); + g_timer_destroy (timer); + return 0; +} diff --git a/tests/test-widget.c b/tests/test-widget.c new file mode 100644 index 0000000..c065185 --- /dev/null +++ b/tests/test-widget.c @@ -0,0 +1,1103 @@ +/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8; coding: utf-8 -*- + * test-widget.c + * This file is part of GtkSourceView + * + * Copyright (C) 2001 - Mikael Hermansson + * Copyright (C) 2003 - Gustavo Giráldez + * Copyright (C) 2014 - Sébastien Wilmet + * + * GtkSourceView is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * GtkSourceView is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include + +#define TEST_TYPE_WIDGET (test_widget_get_type ()) +#define TEST_WIDGET(obj) (G_TYPE_CHECK_INSTANCE_CAST ((obj), TEST_TYPE_WIDGET, TestWidget)) +#define TEST_WIDGET_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST ((klass), TEST_TYPE_WIDGET, TestWidgetClass)) +#define TEST_IS_WIDGET(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), TEST_TYPE_WIDGET)) +#define TEST_IS_WIDGET_CLASS(klass) (G_TYPE_CHECK_CLASS_TYPE ((klass), TEST_TYPE_WIDGET)) +#define TEST_WIDGET_GET_CLASS(obj) (G_TYPE_INSTANCE_GET_CLASS ((obj), TEST_TYPE_WIDGET, TestWidgetClass)) + +typedef struct _TestWidget TestWidget; +typedef struct _TestWidgetClass TestWidgetClass; +typedef struct _TestWidgetPrivate TestWidgetPrivate; + +struct _TestWidget +{ + GtkGrid parent; + + TestWidgetPrivate *priv; +}; + +struct _TestWidgetClass +{ + GtkGridClass parent_class; +}; + +struct _TestWidgetPrivate +{ + GtkSourceView *view; + GtkSourceBuffer *buffer; + GtkSourceFile *file; + GtkSourceMap *map; + GtkCheckButton *show_top_border_window_checkbutton; + GtkCheckButton *show_map_checkbutton; + GtkCheckButton *draw_spaces_checkbutton; + GtkCheckButton *smart_backspace_checkbutton; + GtkCheckButton *indent_width_checkbutton; + GtkSpinButton *indent_width_spinbutton; + GtkLabel *cursor_position_info; + GtkSourceStyleSchemeChooserButton *chooser_button; + GtkComboBoxText *background_pattern; +}; + +GType test_widget_get_type (void); + +G_DEFINE_TYPE_WITH_PRIVATE (TestWidget, test_widget, GTK_TYPE_GRID) + +#define MARK_TYPE_1 "one" +#define MARK_TYPE_2 "two" + +static void +remove_all_marks (GtkSourceBuffer *buffer) +{ + GtkTextIter start; + GtkTextIter end; + + gtk_text_buffer_get_bounds (GTK_TEXT_BUFFER (buffer), &start, &end); + + gtk_source_buffer_remove_source_marks (buffer, &start, &end, NULL); +} + +static GtkSourceLanguage * +get_language_for_file (GtkTextBuffer *buffer, + const gchar *filename) +{ + GtkSourceLanguageManager *manager; + GtkSourceLanguage *language; + GtkTextIter start; + GtkTextIter end; + gchar *text; + gchar *content_type; + gboolean result_uncertain; + + gtk_text_buffer_get_start_iter (buffer, &start); + gtk_text_buffer_get_iter_at_offset (buffer, &end, 1024); + text = gtk_text_buffer_get_slice (buffer, &start, &end, TRUE); + + content_type = g_content_type_guess (filename, + (guchar*) text, + strlen (text), + &result_uncertain); + + if (result_uncertain) + { + g_free (content_type); + content_type = NULL; + } + + manager = gtk_source_language_manager_get_default (); + language = gtk_source_language_manager_guess_language (manager, + filename, + content_type); + + g_message ("Detected '%s' mime type for file %s, chose language %s", + content_type != NULL ? content_type : "(null)", + filename, + language != NULL ? gtk_source_language_get_id (language) : "(none)"); + + g_free (content_type); + g_free (text); + return language; +} + +static GtkSourceLanguage * +get_language_by_id (const gchar *id) +{ + GtkSourceLanguageManager *manager; + manager = gtk_source_language_manager_get_default (); + return gtk_source_language_manager_get_language (manager, id); +} + +static GtkSourceLanguage * +get_language (GtkTextBuffer *buffer, + GFile *location) +{ + GtkSourceLanguage *language = NULL; + GtkTextIter start; + GtkTextIter end; + gchar *text; + gchar *lang_string; + + gtk_text_buffer_get_start_iter (buffer, &start); + end = start; + gtk_text_iter_forward_line (&end); + +#define LANG_STRING "gtk-source-lang:" + + text = gtk_text_iter_get_slice (&start, &end); + lang_string = strstr (text, LANG_STRING); + + if (lang_string != NULL) + { + gchar **tokens; + + lang_string += strlen (LANG_STRING); + g_strchug (lang_string); + + tokens = g_strsplit_set (lang_string, " \t\n", 2); + + if (tokens != NULL && tokens[0] != NULL) + { + language = get_language_by_id (tokens[0]); + } + + g_strfreev (tokens); + } + + if (language == NULL) + { + gchar *filename = g_file_get_path (location); + language = get_language_for_file (buffer, filename); + g_free (filename); + } + + g_free (text); + return language; +} + +static void +print_language_style_ids (GtkSourceLanguage *language) +{ + gchar **styles; + + g_assert (language != NULL); + + styles = gtk_source_language_get_style_ids (language); + + if (styles == NULL) + { + g_print ("No styles in language '%s'\n", + gtk_source_language_get_name (language)); + } + else + { + gchar **ids; + g_print ("Styles in language '%s':\n", + gtk_source_language_get_name (language)); + + for (ids = styles; *ids != NULL; ids++) + { + const gchar *name = gtk_source_language_get_style_name (language, *ids); + + g_print ("- %s (name: '%s')\n", *ids, name); + } + + g_strfreev (styles); + } + + g_print ("\n"); +} + +static void +load_cb (GtkSourceFileLoader *loader, + GAsyncResult *result, + TestWidget *self) +{ + GtkTextIter iter; + GFile *location; + GtkSourceLanguage *language = NULL; + GError *error = NULL; + + gtk_source_file_loader_load_finish (loader, result, &error); + + if (error != NULL) + { + g_warning ("Error while loading the file: %s", error->message); + g_clear_error (&error); + g_clear_object (&self->priv->file); + goto end; + } + + /* move cursor to the beginning */ + gtk_text_buffer_get_start_iter (GTK_TEXT_BUFFER (self->priv->buffer), &iter); + gtk_text_buffer_place_cursor (GTK_TEXT_BUFFER (self->priv->buffer), &iter); + gtk_widget_grab_focus (GTK_WIDGET (self->priv->view)); + + location = gtk_source_file_loader_get_location (loader); + + language = get_language (GTK_TEXT_BUFFER (self->priv->buffer), location); + gtk_source_buffer_set_language (self->priv->buffer, language); + + if (language != NULL) + { + print_language_style_ids (language); + } + else + { + gchar *path = g_file_get_path (location); + g_print ("No language found for file '%s'\n", path); + g_free (path); + } + +end: + g_object_unref (loader); +} + +static void +open_file (TestWidget *self, + const gchar *filename) +{ + GFile *location; + GtkSourceFileLoader *loader; + + g_clear_object (&self->priv->file); + self->priv->file = gtk_source_file_new (); + + location = g_file_new_for_path (filename); + gtk_source_file_set_location (self->priv->file, location); + g_object_unref (location); + + loader = gtk_source_file_loader_new (self->priv->buffer, + self->priv->file); + + remove_all_marks (self->priv->buffer); + + gtk_source_file_loader_load_async (loader, + G_PRIORITY_DEFAULT, + NULL, + NULL, NULL, NULL, + (GAsyncReadyCallback) load_cb, + self); +} + +static void +show_line_numbers_toggled_cb (TestWidget *self, + GtkCheckButton *button) +{ + gboolean enabled = gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (button)); + gtk_source_view_set_show_line_numbers (self->priv->view, enabled); +} + +static void +show_line_marks_toggled_cb (TestWidget *self, + GtkCheckButton *button) +{ + gboolean enabled = gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (button)); + gtk_source_view_set_show_line_marks (self->priv->view, enabled); +} + +static void +show_right_margin_toggled_cb (TestWidget *self, + GtkCheckButton *button) +{ + gboolean enabled = gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (button)); + gtk_source_view_set_show_right_margin (self->priv->view, enabled); +} + +static void +right_margin_position_value_changed_cb (TestWidget *self, + GtkSpinButton *button) +{ + gint position = gtk_spin_button_get_value_as_int (button); + gtk_source_view_set_right_margin_position (self->priv->view, position); +} + +static void +highlight_syntax_toggled_cb (TestWidget *self, + GtkCheckButton *button) +{ + gboolean enabled = gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (button)); + gtk_source_buffer_set_highlight_syntax (self->priv->buffer, enabled); +} + +static void +highlight_matching_bracket_toggled_cb (TestWidget *self, + GtkCheckButton *button) +{ + gboolean enabled = gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (button)); + gtk_source_buffer_set_highlight_matching_brackets (self->priv->buffer, enabled); +} + +static void +highlight_current_line_toggled_cb (TestWidget *self, + GtkCheckButton *button) +{ + gboolean enabled = gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (button)); + gtk_source_view_set_highlight_current_line (self->priv->view, enabled); +} + +static void +wrap_lines_toggled_cb (TestWidget *self, + GtkCheckButton *button) +{ + gboolean enabled = gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (button)); + gtk_text_view_set_wrap_mode (GTK_TEXT_VIEW (self->priv->view), + enabled ? GTK_WRAP_WORD : GTK_WRAP_NONE); +} + +static void +auto_indent_toggled_cb (TestWidget *self, + GtkCheckButton *button) +{ + gboolean enabled = gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (button)); + gtk_source_view_set_auto_indent (self->priv->view, enabled); +} + +static void +indent_spaces_toggled_cb (TestWidget *self, + GtkCheckButton *button) +{ + gboolean enabled = gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (button)); + gtk_source_view_set_insert_spaces_instead_of_tabs (self->priv->view, enabled); +} + +static void +tab_width_value_changed_cb (TestWidget *self, + GtkSpinButton *button) +{ + gint tab_width = gtk_spin_button_get_value_as_int (button); + gtk_source_view_set_tab_width (self->priv->view, tab_width); +} + +static void +update_indent_width (TestWidget *self) +{ + gint indent_width = -1; + + if (gtk_toggle_button_get_active (GTK_TOGGLE_BUTTON (self->priv->indent_width_checkbutton))) + { + indent_width = gtk_spin_button_get_value_as_int (self->priv->indent_width_spinbutton); + } + + gtk_source_view_set_indent_width (self->priv->view, indent_width); +} + +static void +smart_home_end_changed_cb (TestWidget *self, + GtkComboBox *combo) +{ + GtkSourceSmartHomeEndType type; + gint active = gtk_combo_box_get_active (combo); + + switch (active) + { + case 0: + type = GTK_SOURCE_SMART_HOME_END_DISABLED; + break; + + case 1: + type = GTK_SOURCE_SMART_HOME_END_BEFORE; + break; + + case 2: + type = GTK_SOURCE_SMART_HOME_END_AFTER; + break; + + case 3: + type = GTK_SOURCE_SMART_HOME_END_ALWAYS; + break; + + default: + type = GTK_SOURCE_SMART_HOME_END_DISABLED; + break; + } + + gtk_source_view_set_smart_home_end (self->priv->view, type); +} + +static void +backward_string_clicked_cb (TestWidget *self) +{ + GtkTextIter iter; + GtkTextMark *insert; + + insert = gtk_text_buffer_get_insert (GTK_TEXT_BUFFER (self->priv->buffer)); + + gtk_text_buffer_get_iter_at_mark (GTK_TEXT_BUFFER (self->priv->buffer), + &iter, + insert); + + if (gtk_source_buffer_iter_backward_to_context_class_toggle (self->priv->buffer, + &iter, + "string")) + { + gtk_text_buffer_place_cursor (GTK_TEXT_BUFFER (self->priv->buffer), &iter); + gtk_text_view_scroll_mark_onscreen (GTK_TEXT_VIEW (self->priv->view), insert); + } + + gtk_widget_grab_focus (GTK_WIDGET (self->priv->view)); +} + +static void +forward_string_clicked_cb (TestWidget *self) +{ + GtkTextIter iter; + GtkTextMark *insert; + + insert = gtk_text_buffer_get_insert (GTK_TEXT_BUFFER (self->priv->buffer)); + + gtk_text_buffer_get_iter_at_mark (GTK_TEXT_BUFFER (self->priv->buffer), + &iter, + insert); + + if (gtk_source_buffer_iter_forward_to_context_class_toggle (self->priv->buffer, + &iter, + "string")) + { + gtk_text_buffer_place_cursor (GTK_TEXT_BUFFER (self->priv->buffer), &iter); + gtk_text_view_scroll_mark_onscreen (GTK_TEXT_VIEW (self->priv->view), insert); + } + + gtk_widget_grab_focus (GTK_WIDGET (self->priv->view)); +} + +static void +open_button_clicked_cb (TestWidget *self) +{ + GtkWidget *main_window; + GtkWidget *chooser; + gint response; + static gchar *last_dir; + + main_window = gtk_widget_get_toplevel (GTK_WIDGET (self->priv->view)); + + chooser = gtk_file_chooser_dialog_new ("Open file...", + GTK_WINDOW (main_window), + GTK_FILE_CHOOSER_ACTION_OPEN, + "Cancel", GTK_RESPONSE_CANCEL, + "Open", GTK_RESPONSE_OK, + NULL); + + if (last_dir == NULL) + { + last_dir = g_strdup (TOP_SRCDIR "/gtksourceview"); + } + + if (last_dir != NULL && g_path_is_absolute (last_dir)) + { + gtk_file_chooser_set_current_folder (GTK_FILE_CHOOSER (chooser), + last_dir); + } + + response = gtk_dialog_run (GTK_DIALOG (chooser)); + + if (response == GTK_RESPONSE_OK) + { + gchar *filename; + + filename = gtk_file_chooser_get_filename (GTK_FILE_CHOOSER (chooser)); + + if (filename != NULL) + { + g_free (last_dir); + last_dir = gtk_file_chooser_get_current_folder (GTK_FILE_CHOOSER (chooser)); + open_file (self, filename); + g_free (filename); + } + } + + gtk_widget_destroy (chooser); +} + +#define NON_BLOCKING_PAGINATION + +#ifndef NON_BLOCKING_PAGINATION + +static void +begin_print (GtkPrintOperation *operation, + GtkPrintContext *context, + GtkSourcePrintCompositor *compositor) +{ + gint n_pages; + + while (!gtk_source_print_compositor_paginate (compositor, context)) + ; + + n_pages = gtk_source_print_compositor_get_n_pages (compositor); + gtk_print_operation_set_n_pages (operation, n_pages); +} + +#else + +static gboolean +paginate (GtkPrintOperation *operation, + GtkPrintContext *context, + GtkSourcePrintCompositor *compositor) +{ + g_print ("Pagination progress: %.2f %%\n", gtk_source_print_compositor_get_pagination_progress (compositor) * 100.0); + + if (gtk_source_print_compositor_paginate (compositor, context)) + { + gint n_pages; + + g_assert (gtk_source_print_compositor_get_pagination_progress (compositor) == 1.0); + g_print ("Pagination progress: %.2f %%\n", gtk_source_print_compositor_get_pagination_progress (compositor) * 100.0); + + n_pages = gtk_source_print_compositor_get_n_pages (compositor); + gtk_print_operation_set_n_pages (operation, n_pages); + + return TRUE; + } + + return FALSE; +} + +#endif + +#define ENABLE_CUSTOM_OVERLAY + +static void +draw_page (GtkPrintOperation *operation, + GtkPrintContext *context, + gint page_nr, + GtkSourcePrintCompositor *compositor) +{ +#ifdef ENABLE_CUSTOM_OVERLAY + + /* This part of the code shows how to add a custom overlay to the + printed text generated by GtkSourcePrintCompositor */ + + cairo_t *cr; + PangoLayout *layout; + PangoFontDescription *desc; + PangoRectangle rect; + + + cr = gtk_print_context_get_cairo_context (context); + + cairo_save (cr); + + layout = gtk_print_context_create_pango_layout (context); + + pango_layout_set_text (layout, "Draft", -1); + + desc = pango_font_description_from_string ("Sans Bold 120"); + pango_layout_set_font_description (layout, desc); + pango_font_description_free (desc); + + + pango_layout_get_extents (layout, NULL, &rect); + + cairo_move_to (cr, + (gtk_print_context_get_width (context) - ((double) rect.width / (double) PANGO_SCALE)) / 2, + (gtk_print_context_get_height (context) - ((double) rect.height / (double) PANGO_SCALE)) / 2); + + pango_cairo_layout_path (cr, layout); + + /* Font Outline */ + cairo_set_source_rgba (cr, 0.85, 0.85, 0.85, 0.80); + cairo_set_line_width (cr, 0.5); + cairo_stroke_preserve (cr); + + /* Font Fill */ + cairo_set_source_rgba (cr, 0.8, 0.8, 0.8, 0.60); + cairo_fill (cr); + + g_object_unref (layout); + cairo_restore (cr); +#endif + + /* To print page_nr you only need to call the following function */ + gtk_source_print_compositor_draw_page (compositor, context, page_nr); +} + +static void +end_print (GtkPrintOperation *operation, + GtkPrintContext *context, + GtkSourcePrintCompositor *compositor) +{ + g_object_unref (compositor); +} + +#define LINE_NUMBERS_FONT_NAME "Sans 8" +#define HEADER_FONT_NAME "Sans 11" +#define FOOTER_FONT_NAME "Sans 11" +#define BODY_FONT_NAME "Monospace 9" + +/* +#define SETUP_FROM_VIEW +*/ + +#undef SETUP_FROM_VIEW + +static void +print_button_clicked_cb (TestWidget *self) +{ + gchar *basename = NULL; + GtkSourcePrintCompositor *compositor; + GtkPrintOperation *operation; + + if (self->priv->file != NULL) + { + GFile *location; + + location = gtk_source_file_get_location (self->priv->file); + + if (location != NULL) + { + basename = g_file_get_basename (location); + } + } + +#ifdef SETUP_FROM_VIEW + compositor = gtk_source_print_compositor_new_from_view (self->priv->view); +#else + compositor = gtk_source_print_compositor_new (self->priv->buffer); + + gtk_source_print_compositor_set_tab_width (compositor, + gtk_source_view_get_tab_width (self->priv->view)); + + gtk_source_print_compositor_set_wrap_mode (compositor, + gtk_text_view_get_wrap_mode (GTK_TEXT_VIEW (self->priv->view))); + + gtk_source_print_compositor_set_print_line_numbers (compositor, 1); + + gtk_source_print_compositor_set_body_font_name (compositor, + BODY_FONT_NAME); + + /* To test line numbers font != text font */ + gtk_source_print_compositor_set_line_numbers_font_name (compositor, + LINE_NUMBERS_FONT_NAME); + + gtk_source_print_compositor_set_header_format (compositor, + TRUE, + "Printed on %A", + "test-widget", + "%F"); + + gtk_source_print_compositor_set_footer_format (compositor, + TRUE, + "%T", + basename, + "Page %N/%Q"); + + gtk_source_print_compositor_set_print_header (compositor, TRUE); + gtk_source_print_compositor_set_print_footer (compositor, TRUE); + + gtk_source_print_compositor_set_header_font_name (compositor, + HEADER_FONT_NAME); + + gtk_source_print_compositor_set_footer_font_name (compositor, + FOOTER_FONT_NAME); +#endif + operation = gtk_print_operation_new (); + + gtk_print_operation_set_job_name (operation, basename); + + gtk_print_operation_set_show_progress (operation, TRUE); + +#ifndef NON_BLOCKING_PAGINATION + g_signal_connect (G_OBJECT (operation), "begin-print", + G_CALLBACK (begin_print), compositor); +#else + g_signal_connect (G_OBJECT (operation), "paginate", + G_CALLBACK (paginate), compositor); +#endif + g_signal_connect (G_OBJECT (operation), "draw-page", + G_CALLBACK (draw_page), compositor); + g_signal_connect (G_OBJECT (operation), "end-print", + G_CALLBACK (end_print), compositor); + + gtk_print_operation_run (operation, + GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG, + NULL, NULL); + + g_object_unref (operation); + g_free (basename); +} + +static void +update_cursor_position_info (TestWidget *self) +{ + gchar *msg; + gint offset; + gint line; + guint column; + GtkTextIter iter; + gchar **classes; + gchar **classes_ptr; + GString *classes_str; + + gtk_text_buffer_get_iter_at_mark (GTK_TEXT_BUFFER (self->priv->buffer), + &iter, + gtk_text_buffer_get_insert (GTK_TEXT_BUFFER (self->priv->buffer))); + + offset = gtk_text_iter_get_offset (&iter); + line = gtk_text_iter_get_line (&iter) + 1; + column = gtk_source_view_get_visual_column (self->priv->view, &iter) + 1; + + classes = gtk_source_buffer_get_context_classes_at_iter (self->priv->buffer, &iter); + + classes_str = g_string_new (""); + + for (classes_ptr = classes; classes_ptr != NULL && *classes_ptr != NULL; classes_ptr++) + { + if (classes_ptr != classes) + { + g_string_append (classes_str, ", "); + } + + g_string_append_printf (classes_str, "%s", *classes_ptr); + } + + g_strfreev (classes); + + msg = g_strdup_printf ("offset: %d, line: %d, column: %u, classes: %s", + offset, + line, + column, + classes_str->str); + + gtk_label_set_text (self->priv->cursor_position_info, msg); + + g_free (msg); + g_string_free (classes_str, TRUE); +} + +static void +mark_set_cb (GtkTextBuffer *buffer, + GtkTextIter *iter, + GtkTextMark *mark, + TestWidget *self) +{ + if (mark == gtk_text_buffer_get_insert (buffer)) + { + update_cursor_position_info (self); + } +} + +static void +line_mark_activated_cb (GtkSourceGutter *gutter, + GtkTextIter *iter, + GdkEventButton *event, + TestWidget *self) +{ + GSList *mark_list; + const gchar *mark_type; + + mark_type = event->button == 1 ? MARK_TYPE_1 : MARK_TYPE_2; + + /* get the marks already in the line */ + mark_list = gtk_source_buffer_get_source_marks_at_line (self->priv->buffer, + gtk_text_iter_get_line (iter), + mark_type); + + if (mark_list != NULL) + { + /* just take the first and delete it */ + gtk_text_buffer_delete_mark (GTK_TEXT_BUFFER (self->priv->buffer), + GTK_TEXT_MARK (mark_list->data)); + } + else + { + /* no mark found: create one */ + gtk_source_buffer_create_source_mark (self->priv->buffer, + NULL, + mark_type, + iter); + } + + g_slist_free (mark_list); +} + +static void +bracket_matched_cb (GtkSourceBuffer *buffer, + GtkTextIter *iter, + GtkSourceBracketMatchType state) +{ + GEnumClass *eclass; + GEnumValue *evalue; + + eclass = G_ENUM_CLASS (g_type_class_ref (GTK_SOURCE_TYPE_BRACKET_MATCH_TYPE)); + evalue = g_enum_get_value (eclass, state); + + g_print ("Bracket match state: '%s'\n", evalue->value_nick); + + g_type_class_unref (eclass); + + if (state == GTK_SOURCE_BRACKET_MATCH_FOUND) + { + g_return_if_fail (iter != NULL); + + g_print ("Matched bracket: '%c' at row: %"G_GINT32_FORMAT", col: %"G_GINT32_FORMAT"\n", + gtk_text_iter_get_char (iter), + gtk_text_iter_get_line (iter) + 1, + gtk_text_iter_get_line_offset (iter) + 1); + } +} + +static gchar * +mark_tooltip_func (GtkSourceMarkAttributes *attrs, + GtkSourceMark *mark, + GtkSourceView *view) +{ + GtkTextBuffer *buffer; + GtkTextIter iter; + gint line; + gint column; + + buffer = gtk_text_mark_get_buffer (GTK_TEXT_MARK (mark)); + + gtk_text_buffer_get_iter_at_mark (buffer, &iter, GTK_TEXT_MARK (mark)); + line = gtk_text_iter_get_line (&iter) + 1; + column = gtk_text_iter_get_line_offset (&iter); + + if (g_strcmp0 (gtk_source_mark_get_category (mark), MARK_TYPE_1) == 0) + { + return g_strdup_printf ("Line: %d, Column: %d", line, column); + } + else + { + return g_strdup_printf ("Line: %d\nColumn: %d", line, column); + } +} + +static void +add_source_mark_attributes (GtkSourceView *view) +{ + GdkRGBA color; + GtkSourceMarkAttributes *attrs; + + attrs = gtk_source_mark_attributes_new (); + + gdk_rgba_parse (&color, "lightgreen"); + gtk_source_mark_attributes_set_background (attrs, &color); + + gtk_source_mark_attributes_set_icon_name (attrs, "list-add"); + + g_signal_connect_object (attrs, + "query-tooltip-markup", + G_CALLBACK (mark_tooltip_func), + view, + 0); + + gtk_source_view_set_mark_attributes (view, MARK_TYPE_1, attrs, 1); + g_object_unref (attrs); + + attrs = gtk_source_mark_attributes_new (); + + gdk_rgba_parse (&color, "pink"); + gtk_source_mark_attributes_set_background (attrs, &color); + + gtk_source_mark_attributes_set_icon_name (attrs, "list-remove"); + + g_signal_connect_object (attrs, + "query-tooltip-markup", + G_CALLBACK (mark_tooltip_func), + view, + 0); + + gtk_source_view_set_mark_attributes (view, MARK_TYPE_2, attrs, 2); + g_object_unref (attrs); +} + +static void +on_background_pattern_changed (GtkComboBox *combobox, + TestWidget *self) +{ + gchar *text; + + text = gtk_combo_box_text_get_active_text (GTK_COMBO_BOX_TEXT (combobox)); + + if (g_strcmp0 (text, "Grid") == 0) + { + gtk_source_view_set_background_pattern (self->priv->view, + GTK_SOURCE_BACKGROUND_PATTERN_TYPE_GRID); + } + else + { + gtk_source_view_set_background_pattern (self->priv->view, + GTK_SOURCE_BACKGROUND_PATTERN_TYPE_NONE); + } + + g_free (text); +} + +static void +test_widget_dispose (GObject *object) +{ + TestWidget *self = TEST_WIDGET (object); + + g_clear_object (&self->priv->buffer); + g_clear_object (&self->priv->file); + + G_OBJECT_CLASS (test_widget_parent_class)->dispose (object); +} + +static void +test_widget_class_init (TestWidgetClass *klass) +{ + GObjectClass *object_class = G_OBJECT_CLASS (klass); + GtkWidgetClass *widget_class = GTK_WIDGET_CLASS (klass); + + object_class->dispose = test_widget_dispose; + + gtk_widget_class_set_template_from_resource (widget_class, + "/org/gnome/gtksourceview/tests/ui/test-widget.ui"); + + gtk_widget_class_bind_template_callback (widget_class, open_button_clicked_cb); + gtk_widget_class_bind_template_callback (widget_class, print_button_clicked_cb); + gtk_widget_class_bind_template_callback (widget_class, highlight_syntax_toggled_cb); + gtk_widget_class_bind_template_callback (widget_class, highlight_matching_bracket_toggled_cb); + gtk_widget_class_bind_template_callback (widget_class, show_line_numbers_toggled_cb); + gtk_widget_class_bind_template_callback (widget_class, show_line_marks_toggled_cb); + gtk_widget_class_bind_template_callback (widget_class, show_right_margin_toggled_cb); + gtk_widget_class_bind_template_callback (widget_class, right_margin_position_value_changed_cb); + gtk_widget_class_bind_template_callback (widget_class, highlight_current_line_toggled_cb); + gtk_widget_class_bind_template_callback (widget_class, wrap_lines_toggled_cb); + gtk_widget_class_bind_template_callback (widget_class, auto_indent_toggled_cb); + gtk_widget_class_bind_template_callback (widget_class, indent_spaces_toggled_cb); + gtk_widget_class_bind_template_callback (widget_class, tab_width_value_changed_cb); + gtk_widget_class_bind_template_callback (widget_class, backward_string_clicked_cb); + gtk_widget_class_bind_template_callback (widget_class, forward_string_clicked_cb); + gtk_widget_class_bind_template_callback (widget_class, smart_home_end_changed_cb); + + gtk_widget_class_bind_template_child_private (widget_class, TestWidget, view); + gtk_widget_class_bind_template_child_private (widget_class, TestWidget, map); + gtk_widget_class_bind_template_child_private (widget_class, TestWidget, show_top_border_window_checkbutton); + gtk_widget_class_bind_template_child_private (widget_class, TestWidget, show_map_checkbutton); + gtk_widget_class_bind_template_child_private (widget_class, TestWidget, draw_spaces_checkbutton); + gtk_widget_class_bind_template_child_private (widget_class, TestWidget, smart_backspace_checkbutton); + gtk_widget_class_bind_template_child_private (widget_class, TestWidget, indent_width_checkbutton); + gtk_widget_class_bind_template_child_private (widget_class, TestWidget, indent_width_spinbutton); + gtk_widget_class_bind_template_child_private (widget_class, TestWidget, cursor_position_info); + gtk_widget_class_bind_template_child_private (widget_class, TestWidget, chooser_button); + gtk_widget_class_bind_template_child_private (widget_class, TestWidget, background_pattern); +} + +static void +show_top_border_window_toggled_cb (GtkToggleButton *checkbutton, + TestWidget *self) +{ + gint size; + + size = gtk_toggle_button_get_active (checkbutton) ? 20 : 0; + + gtk_text_view_set_border_window_size (GTK_TEXT_VIEW (self->priv->view), + GTK_TEXT_WINDOW_TOP, + size); +} + +static void +test_widget_init (TestWidget *self) +{ + GtkSourceSpaceDrawer *space_drawer; + + self->priv = test_widget_get_instance_private (self); + + gtk_widget_init_template (GTK_WIDGET (self)); + + self->priv->buffer = GTK_SOURCE_BUFFER ( + gtk_text_view_get_buffer (GTK_TEXT_VIEW (self->priv->view))); + + g_object_ref (self->priv->buffer); + + g_signal_connect (self->priv->show_top_border_window_checkbutton, + "toggled", + G_CALLBACK (show_top_border_window_toggled_cb), + self); + + g_signal_connect_swapped (self->priv->indent_width_checkbutton, + "toggled", + G_CALLBACK (update_indent_width), + self); + + g_signal_connect_swapped (self->priv->indent_width_spinbutton, + "value-changed", + G_CALLBACK (update_indent_width), + self); + + g_signal_connect (self->priv->buffer, + "mark-set", + G_CALLBACK (mark_set_cb), + self); + + g_signal_connect_swapped (self->priv->buffer, + "changed", + G_CALLBACK (update_cursor_position_info), + self); + + g_signal_connect (self->priv->buffer, + "bracket-matched", + G_CALLBACK (bracket_matched_cb), + NULL); + + add_source_mark_attributes (self->priv->view); + + g_signal_connect (self->priv->view, + "line-mark-activated", + G_CALLBACK (line_mark_activated_cb), + self); + + g_object_bind_property (self->priv->chooser_button, + "style-scheme", + self->priv->buffer, + "style-scheme", + G_BINDING_SYNC_CREATE); + + g_object_bind_property (self->priv->show_map_checkbutton, + "active", + self->priv->map, + "visible", + G_BINDING_SYNC_CREATE); + + g_object_bind_property (self->priv->smart_backspace_checkbutton, + "active", + self->priv->view, + "smart-backspace", + G_BINDING_SYNC_CREATE); + + g_signal_connect (self->priv->background_pattern, + "changed", + G_CALLBACK (on_background_pattern_changed), + self); + + space_drawer = gtk_source_view_get_space_drawer (self->priv->view); + g_object_bind_property (self->priv->draw_spaces_checkbutton, "active", + space_drawer, "enable-matrix", + G_BINDING_BIDIRECTIONAL | G_BINDING_SYNC_CREATE); + + open_file (self, TOP_SRCDIR "/gtksourceview/gtksourcebuffer.c"); +} + +static TestWidget * +test_widget_new (void) +{ + return g_object_new (test_widget_get_type (), NULL); +} + +int +main (int argc, char *argv[]) +{ + GtkWidget *window; + TestWidget *test_widget; + + gtk_init (&argc, &argv); + + window = gtk_window_new (GTK_WINDOW_TOPLEVEL); + gtk_window_set_default_size (GTK_WINDOW (window), 900, 600); + + g_signal_connect (window, "destroy", gtk_main_quit, NULL); + + test_widget = test_widget_new (); + gtk_container_add (GTK_CONTAINER (window), GTK_WIDGET (test_widget)); + + gtk_widget_show (window); + + gtk_main (); + return 0; +} diff --git a/tests/test-widget.gresource.xml b/tests/test-widget.gresource.xml new file mode 100644 index 0000000..7568a08 --- /dev/null +++ b/tests/test-widget.gresource.xml @@ -0,0 +1,6 @@ + + + + test-widget.ui + + diff --git a/tests/test-widget.py b/tests/test-widget.py new file mode 100644 index 0000000..701a195 --- /dev/null +++ b/tests/test-widget.py @@ -0,0 +1,589 @@ +#!/usr/bin/env python +# -*- Mode: Python; py-indent-offset: 4 -*- +# vim: tabstop=4 shiftwidth=4 expandtab + +# WARNING: test-widget.c is more complete and is better maintained. + +import os, os.path +import sys + +import gi +from gi.repository import Gio, GObject, Pango, Gtk, GdkPixbuf, Gdk, GtkSource + +ui_description = """ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +""" + +class AboutDialog(Gtk.AboutDialog): + + def __init__(self, parent): + Gtk.AboutDialog.__init__(self) + self.set_name('GtkSourceView Test') + self.set_copyright('Copyright (c) 2010 Ignacio Casal Quinteiro') + self.set_website_label('https://wiki.gnome.org/Projects/GtkSourceView') + self.set_authors(['Ignacio Casal Quinteiro', 'Paolo Borelli']) + self.set_transient_for(parent) + self.connect("response", lambda d, r: d.destroy()) + +class SearchDialog(Gtk.Dialog): + + def __init__(self, parent, replace, what, replacement): + if replace: + title = "Replace" + else: + title = "Find" + + Gtk.Dialog.__init__(self, title, parent, Gtk.DialogFlags.MODAL, + (Gtk.STOCK_CANCEL, Gtk.ResponseType.CANCEL, + Gtk.STOCK_OK, Gtk.ResponseType.OK)) + + self._search_widget = Gtk.Entry() + if what: + self._search_widget.set_text(what) + self._search_widget.set_activates_default(True) + self._search_widget.show() + print(self.get_content_area()) + self.get_content_area().pack_start(self._search_widget, True, True, 0) + + if replace: + self._replace_widget = Gtk.Entry() + if replacement: + self._replace_widget.set_text(replacement) + self._replace_widget.set_activates_default(True) + self._replace_widget.show() + self.get_content_area().pack_start(self._replace_widget, True, True, 0) + + self._case_sensitive = Gtk.CheckButton.new_with_label("Case sensitive") + self._case_sensitive.show() + self.get_content_area().pack_start(self._case_sensitive, False, False, 0) + + def run_search(self): + while True: + if self.run() != Gtk.ResponseType.OK: + self.hide() + return False + + if self._search_widget.get_text() != "": + break + + self.hide() + return True + + def is_case_sensitive(self): + return self._case_sensitive.get_active() + + def get_search_text(self): + return self._search_widget.get_text() + + def get_replace_text(self): + return self._replace_widget.get_text() + +class Window(Gtk.Window): + + def __init__(self): + Gtk.Window.__init__(self) + + self.MARK_TYPE_1 = "one" + self.MARK_TYPE_2 = "two" + + self.set_title('GtkSourceView Demo') + self.set_icon_name('text-editor') + self.set_default_size(500, 500) + self.connect_after('destroy', _quit) + + self._vbox = Gtk.VBox() + self.add(self._vbox) + + sw = Gtk.ScrolledWindow(hadjustment=None, + vadjustment=None) + sw.set_shadow_type(Gtk.ShadowType.IN) + + self._buf = GtkSource.Buffer() + self._view = GtkSource.View.new_with_buffer(self._buf) + self.insert_menu() + + mgr = GtkSource.StyleSchemeManager.get_default() + style_scheme = mgr.get_scheme('classic') + if style_scheme: + self._buf.set_style_scheme(style_scheme) + + self._vbox.pack_start(sw, True, True, 0) + sw.add(self._view) + + self._pos_label = Gtk.Label() + self._vbox.pack_end(self._pos_label, False, False, 0) + + self.add_source_mark_pixbufs() + + self._buf.connect("mark-set", self.move_cursor_cb, None) + self._view.connect("line-mark-activated", self.line_mark_activated, None) + self._buf.connect("bracket-matched", self.bracket_matched, None); + + def insert_menu(self): + action_group = Gtk.ActionGroup("GtkSourceViewActions") + action_group.add_actions([("FileMenu", None, "_File", None, None, None), + ("Open", Gtk.STOCK_OPEN, "_Open", "O", + "Open a file", self.open_file_cb), + ("Print", Gtk.STOCK_PRINT, "_Print", "P", + "Print the current file", self.print_file_cb), + ("Find", Gtk.STOCK_FIND, "_Find", "F", + "Find", self.find_cb), + ("Replace", Gtk.STOCK_FIND_AND_REPLACE, "Search and _Replace", "R", + "Search and replace", self.replace_cb), + ("Quit", Gtk.STOCK_QUIT, "_Quit", "Q", + "Exit the application", self.quit_cb), + ("ViewMenu", None, "_View", None, None, None), + ("NewView", Gtk.STOCK_NEW, "_New View", None, + "Create a new view of the file", self.new_view_cb), + ("TabWidth", None, "_Tab Width", None, None, None), + ("IndentWidth", None, "I_ndent Width", None, None, None), + ("SmartHomeEnd", None, "_Smart Home/End", None, None, None), + ("ForwardString", None, "_Forward to string toggle", "S", + "Forward to the start or end of the next string", self.forward_string_cb), + ("BackwardString", None, "_Backward to string toggle", "S", + "Backward to the start or end of the next string", self.backward_string_cb), + ("HelpMenu", None, "_Help", None, None, None), + ("About", Gtk.STOCK_ABOUT, "_About...", None, + "About GtkSourceView Test Widget", self.about_cb)]) + + action_group.add_toggle_actions([("HlSyntax", None, "Highlight _Syntax", None, + "Toggle syntax highlighting", self.hl_syntax_toggled_cb), + ("HlBracket", None, "Highlight Matching _Bracket", None, + "Toggle highlighting of matching bracket", self.hl_bracket_toggled_cb), + ("ShowNumbers", None, "Show _Line Numbers", None, + "Toggle visibility of line numbers in the left margin", self.numbers_toggled_cb), + ("ShowMarks", None, "Show Line _Marks", None, + "Toggle visibility of marks in the left margin", self.marks_toggled_cb), + ("ShowMargin", None, "Show Right M_argin", None, + "Toggle visibility of right margin indicator", self.margin_toggled_cb), + ("HlLine", None, "_Highlight Current Line", None, + "Toggle highlighting of current line", self.hl_line_toggled_cb), + ("DrawSpaces", None, "_Draw Spaces", None, + "Draw Spaces", self.draw_spaces_toggled_cb), + ("WrapLines", None, "_Wrap Lines", None, + "Toggle line wrapping", self.wrap_lines_toggled_cb), + ("AutoIndent", None, "Enable _Auto Indent", None, + "Toggle automatic auto indentation of text", self.auto_indent_toggled_cb), + ("InsertSpaces", None, "Insert _Spaces Instead of Tabs", None, + "Whether to insert space characters when inserting tabulations", + self.insert_spaces_toggled_cb)]) + + action_group.add_radio_actions([("TabWidth4", None, "4", None, + "Set tabulation width to 4 spaces", 4), + ("TabWidth6", None, "6", None, + "Set tabulation width to 6 spaces", 6), + ("TabWidth8", None, "8", None, + "Set tabulation width to 8 spaces", 8), + ("TabWidth10", None, "10", None, + "Set tabulation width to 10 spaces", 10), + ("TabWidth12", None, "12", None, + "Set tabulation width to 12 spaces", 12)], + -1, self.tabs_toggled_cb) + + action_group.add_radio_actions([("IndentWidthUnset", None, "Use Tab Width", None, + "Set indent width same as tab width", -1), + ("IndentWidth4", None, "4", None, + "Set indent width to 4 spaces", 4), + ("IndentWidth6", None, "6", None, + "Set indent width to 6 spaces", 6), + ("IndentWidth8", None, "8", None, + "Set indent width to 8 spaces", 8), + ("IndentWidth10", None, "10", None, + "Set indent width to 10 spaces", 10), + ("IndentWidth12", None, "12", None, + "Set indent width to 12 spaces", 12)], + -1, self.indent_toggled_cb) + + action_group.add_radio_actions([("SmartHomeEndDisabled", None, "Disabled", None, + "Smart Home/End disabled", GtkSource.SmartHomeEndType.DISABLED), + ("SmartHomeEndBefore", None, "Before", None, + "Smart Home/End before", GtkSource.SmartHomeEndType.BEFORE), + ("SmartHomeEndAfter", None, "After", None, + "Smart Home/End after", GtkSource.SmartHomeEndType.AFTER), + ("SmartHomeEndAlways", None, "Always", None, + "Smart Home/End always", GtkSource.SmartHomeEndType.ALWAYS)], + -1, self.smart_home_end_toggled_cb) + + self._ui_manager = Gtk.UIManager() + self._ui_manager.insert_action_group(action_group, 0) + + try: + self._ui_manager.add_ui_from_string(ui_description) + except: + return + + menu = self._ui_manager.get_widget("/MainMenu") + self._vbox.pack_start(menu, False, False, 0) + + accel_group = self._ui_manager.get_accel_group() + self.add_accel_group (accel_group) + + # Add default values + action_group.get_action("HlSyntax").set_active(True) + action_group.get_action("HlBracket").set_active(True) + action_group.get_action("ShowNumbers").set_active(True) + action_group.get_action("ShowMarks").set_active(True) + action_group.get_action("ShowMargin").set_active(True) + action_group.get_action("AutoIndent").set_active(True) + action_group.get_action("TabWidth8").set_active(True) + action_group.get_action("IndentWidthUnset").set_active(True) + + def add_source_mark_pixbufs(self): + attrs = GtkSource.MarkAttributes (); + color = Gdk.RGBA(); + parsed = color.parse("lightgreen") + if parsed: + attrs.set_background(color) + attrs.set_stock_id(Gtk.STOCK_YES) + attrs.connect("query-tooltip-markup", self.mark_tooltip_func) + self._view.set_mark_attributes (self.MARK_TYPE_1, attrs, 1) + + attrs = GtkSource.MarkAttributes (); + color = Gdk.RGBA(); + parsed = color.parse("pink") + if parsed: + attrs.set_background(color) + attrs.set_stock_id(Gtk.STOCK_NO) + attrs.connect("query-tooltip-markup", self.mark_tooltip_func) + self._view.set_mark_attributes (self.MARK_TYPE_2, attrs, 2) + + def remove_all_marks(self): + start, end = self._buf.get_bounds() + self._buf.remove_source_marks(start, end, None) + + def mark_tooltip_func(self, attrs, mark): + i = self._buf.get_iter_at_mark(mark) + line = i.get_line() + 1 + column = i.get_line_offset() + + if mark.get_category() == self.MARK_TYPE_1: + return "Line: %d, Column: %d" % (line, column) + else: + return "Line: %d\nColumn: %d" % (line, column) + + def update_cursor_position(self): + i = self._buf.get_iter_at_mark(self._buf.get_insert()) + chars = i.get_offset() + row = i.get_line() + 1 + col = self._view.get_visual_column(i) + 1 + + classes = self._buf.get_context_classes_at_iter(i) + + classes_str = "" + + i = 0 + for c in classes: + if len(classes) != i + 1: + classes_str += c + ", " + else: + classes_str += c + + msg = "char: %d, line: %d, column: %d, classes: %s" % (chars, row, col, classes_str) + self._pos_label.set_text(msg) + + # Callbacks + def open_file_cb(self, action, user_data=None): + chooser = Gtk.FileChooserDialog("Open File...", None, + Gtk.FileChooserAction.OPEN, + (Gtk.STOCK_CANCEL, Gtk.ResponseType.CANCEL, + Gtk.STOCK_OPEN, Gtk.ResponseType.OK)) + + response = chooser.run() + + if response == Gtk.ResponseType.OK: + filename = chooser.get_filename() + + if filename: + self.open_file(filename) + + chooser.destroy() + + def print_file_cb(self, action, user_data=None): + compositor = GtkSource.PrintCompositor.new_from_view (self._view) + operation = Gtk.PrintOperation () + operation.set_job_name (os.path.basename(self._filepath)) + operation.set_show_progress (True) + + # we do blocking pagination + operation.connect('paginate', self.paginate_cb, compositor) + operation.connect('draw-page', self.draw_page_cb, compositor) + + operation.run (Gtk.PrintOperationAction.PRINT_DIALOG, None) + + def find_cb(self, action, user_data=None): + dialog = SearchDialog(self, False, None, None) + + if dialog.is_case_sensitive: + search_flags = GtkSource.SearchFlags.CASE_INSENSITIVE + else: + search_flags = 0 + + if dialog.run_search(): + i = self._buf.get_iter_at_mark(self._buf.get_insert()) + + searched, start, end = i.forward_search(dialog.get_search_text(), + search_flags, None) + if searched: + self._buf.select_range(start, end) + else: + end = i + i = self._buf.get_start_iter() + + searched, start, end = i.forward_search(dialog.get_search_text(), + search_flags, end) + if searched: + self._buf.select_range(start, end) + + def replace_cb(self, action, user_data=None): + dialog = SearchDialog(self, False, None, None) + + if dialog.is_case_sensitive: + search_flags = GtkSource.SearchFlags.CASE_INSENSITIVE + else: + search_flags = 0 + + i = self._buf.get_start_iter() + + while True: + searched, start, end = i.forward_search(dialog.get_search_text(), + search_flags, None) + + if not searched: + break + + self._buf.delete(start, end) + self._buf.insert(start, dialog.get_replace_text()) + i = start + + def quit_cb(self, action, user_data=None): + _quit() + + def new_view_cb(self, action, user_data=None): + window = Window() + window.show_all() + + def hl_syntax_toggled_cb(self, action, user_data=None): + self._buf.set_highlight_syntax(action.get_active()) + + def hl_bracket_toggled_cb(self, action, user_data=None): + self._buf.set_highlight_matching_brackets(action.get_active()) + + def numbers_toggled_cb(self, action, user_data=None): + self._view.set_show_line_numbers(action.get_active()) + + def marks_toggled_cb(self, action, user_data=None): + self._view.set_show_line_marks(action.get_active()) + + def margin_toggled_cb(self, action, user_data=None): + self._view.set_show_right_margin(action.get_active()) + + def hl_line_toggled_cb(self, action, user_data=None): + self._view.set_highlight_current_line(action.get_active()) + + def draw_spaces_toggled_cb(self, action, user_data=None): + + if (action.get_active()): + draw_spaces = GtkSource.DrawSpacesFlags.ALL + else: + draw_spaces = 0 + self._view.set_draw_spaces(draw_spaces) + + def wrap_lines_toggled_cb(self, action, user_data=None): + + if (action.get_active()): + wrap_mode = Gtk.WrapMode.WORD + else: + wrap_mode = Gtk.WrapMode.NONE + self._view.set_wrap_mode(wrap_mode) + + def auto_indent_toggled_cb(self, action, user_data=None): + self._view.set_auto_indent(action.get_active()) + + def insert_spaces_toggled_cb(self, action, user_data=None): + self._view.set_insert_spaces_instead_of_tabs(action.get_active()) + + def forward_string_cb(self, action, user_data=None): + insert = self._buf.get_insert() + + it = self._buf.get_iter_at_mark(insert) + + if (self._buf.iter_forward_to_context_class_toggle(it, "string")): + self._buf.place_cursor(it) + self._view.scroll_mark_onscreen(insert) + + def backward_string_cb(self, action, user_data=None): + insert = self._buf.get_insert() + + it = self._buf.get_iter_at_mark(insert) + + if (self._buf.iter_backward_to_context_class_toggle(it, "string")): + self._buf.place_cursor(it) + self._view.scroll_mark_onscreen(insert) + + def tabs_toggled_cb(self, action, current, user_data=None): + self._view.set_tab_width(current.get_current_value()) + + def indent_toggled_cb(self, action, current): + self._view.set_indent_width(current.get_current_value()) + + def smart_home_end_toggled_cb(self, action, current, user_data=None): + self._view.set_smart_home_end(current.get_current_value()) + + def about_cb(self, action, user_data=None): + about = AboutDialog(self) + about.show() + + def move_cursor_cb(self, buf, cursor_iter, mark, user_data): + if mark != buf.get_insert(): + return + + self.update_cursor_position() + + def line_mark_activated(self, gutter, place, ev, user_data): + if ev.button.button == 1: + mark_type = self.MARK_TYPE_1 + else: + mark_type = self.MARK_TYPE_2 + + mark_list = self._buf.get_source_marks_at_line(place.get_line(), mark_type) + + if mark_list: + self._buf.delete_mark(mark_list[0]) + else: + self._buf.create_source_mark(None, mark_type, place) + + def bracket_matched(self, buf, place, state, user_data): + # FIXME: figure out how to obtain the nick from the enum value + # print "Bracket match state: '%s'\n" % nick + if state == GtkSource.BracketMatchType.FOUND: + bracket = place.get_char() + row = place.get_line() + 1 + col = place.get_line_offset() + 1 + print("Matched bracket: '%c' at row: %i, col: %i" % (bracket, row, col)) + + def open_file(self, filename): + if os.path.isabs(filename): + path = filename + else: + path = os.path.abspath(filename) + + self._filepath = path + + f = Gio.file_new_for_path(path) + + info = f.query_info("*", 0, None) + content_type = info.get_content_type() + + mgr = GtkSource.LanguageManager.get_default() + language = mgr.guess_language(filename, content_type) + + self.remove_all_marks() + self._buf.set_language(language) + self._buf.set_highlight_syntax(True) + + self._buf.begin_not_undoable_action() + + # stream = f.read(None) + # chunk, r = stream.read(4096, None) + + #FIXME: Use Gio + try: + txt = open(path, 'r').read() + except: + return False + + self._buf.set_text(txt, -1) + + self._buf.end_not_undoable_action() + + self._buf.set_modified(False) + + i = self._buf.get_start_iter() + self._buf.place_cursor(i) + return True + + def paginate_cb(self, operation, context, compositor): + print("Pagination progress: %.2f %%\n" % (compositor.get_pagination_progress () * 100.0)) + if compositor.paginate (context): + print("Pagination progress: %.2f %%\n" % (compositor.get_pagination_progress () * 100.0)) + operation.set_n_pages (compositor.get_n_pages ()) + return True + return False + + def draw_page_cb(self, operation, context, page_nr, compositor): + compositor.draw_page (context, page_nr) + +def _quit(*args): + Gtk.main_quit() + +def main(args = []): + global window + + window = Window() + + if len(args) > 2: + window.open_file(args[1]) + else: + window.open_file(args[0]) + + window.show_all() + Gtk.main() + +if __name__ == '__main__': + main(sys.argv) + diff --git a/tests/test-widget.ui b/tests/test-widget.ui new file mode 100644 index 0000000..150e5e3 --- /dev/null +++ b/tests/test-widget.ui @@ -0,0 +1,599 @@ + + + + + + + 1 + 16 + 1 + 10 + + + 1 + 100 + 80 + 1 + 10 + + + 1 + 16 + 8 + 1 + 10 + + + diff --git a/testsuite/Makefile.am b/testsuite/Makefile.am new file mode 100644 index 0000000..4324f9b --- /dev/null +++ b/testsuite/Makefile.am @@ -0,0 +1,141 @@ +@CODE_COVERAGE_RULES@ + +@VALGRIND_CHECK_RULES@ + +# https://github.com/pwithnall/walbottle +# https://github.com/dtrebbien/GNOME.supp +VALGRIND_SUPPRESSIONS_FILES = \ + $(top_srcdir)/../walbottle/libwalbottle/tests/walbottle.supp \ + $(top_srcdir)/../GNOME.supp/build/base.supp \ + $(top_srcdir)/../GNOME.supp/build/pango.supp \ + $(top_srcdir)/../GNOME.supp/build/gdk.supp \ + $(top_srcdir)/../GNOME.supp/build/gtk3.supp + +AM_CPPFLAGS = \ + -DG_LOG_DOMAIN=\"GtkSourceView\"\ + -I$(top_srcdir) -I$(srcdir) \ + -DTOP_SRCDIR=\""$(ABS_TOP_SRCDIR)"\"\ + $(DISABLE_DEPRECATED_CFLAGS) \ + $(WARN_CFLAGS) \ + $(DEP_CFLAGS) \ + $(TESTS_CFLAGS) + +AM_LDFLAGS = $(WARN_LDFLAGS) + +LDADD = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + -lm \ + $(DEP_LIBS) \ + $(TESTS_LIBS) + +UNIT_TEST_PROGS = + +UNIT_TEST_PROGS += test-buffer +test_buffer_SOURCES = test-buffer.c + +UNIT_TEST_PROGS += test-buffer-input-stream +test_buffer_input_stream_SOURCES = test-buffer-input-stream.c + +UNIT_TEST_PROGS += test-buffer-output-stream +test_buffer_output_stream_SOURCES = test-buffer-output-stream.c + +UNIT_TEST_PROGS += test-completion-model +test_completion_model_SOURCES = test-completion-model.c + +UNIT_TEST_PROGS += test-completion-words +test_completion_words_SOURCES = test-completion-words.c + +UNIT_TEST_PROGS += test-encoding +test_encoding_SOURCES = test-encoding.c + +UNIT_TEST_PROGS += test-file-loader +test_file_loader_SOURCES = test-file-loader.c + +UNIT_TEST_PROGS += test-file-saver +test_file_saver_SOURCES = test-file-saver.c + +UNIT_TEST_PROGS += test-iter +test_iter_SOURCES = test-iter.c + +UNIT_TEST_PROGS += test-language +test_language_SOURCES = test-language.c + +UNIT_TEST_PROGS += test-languagemanager +test_languagemanager_SOURCES = test-languagemanager.c + +UNIT_TEST_PROGS += test-mark +test_mark_SOURCES = test-mark.c + +UNIT_TEST_PROGS += test-printcompositor +test_printcompositor_SOURCES = test-printcompositor.c + +UNIT_TEST_PROGS += test-regex +test_regex_SOURCES = test-regex.c + +UNIT_TEST_PROGS += test-region +test_region_SOURCES = test-region.c + +UNIT_TEST_PROGS += test-search-context +test_search_context_SOURCES = test-search-context.c + +UNIT_TEST_PROGS += test-space-drawer +test_space_drawer_SOURCES = test-space-drawer.c + +UNIT_TEST_PROGS += test-stylescheme +test_stylescheme_SOURCES = test-stylescheme.c + +UNIT_TEST_PROGS += test-styleschememanager +test_styleschememanager_SOURCES = test-styleschememanager.c + +UNIT_TEST_PROGS += test-undo-manager +test_undo_manager_SOURCES = test-undo-manager.c + +UNIT_TEST_PROGS += test-utils +test_utils_SOURCES = test-utils.c + +UNIT_TEST_PROGS += test-view +test_view_SOURCES = test-view.c + +TESTS_ENVIRONMENT = G_TEST_SRCDIR="$(abs_srcdir)" +TESTS = $(UNIT_TEST_PROGS) +noinst_PROGRAMS = $(UNIT_TEST_PROGS) + +EXTRA_DIST = \ + language-specs/test-empty.lang \ + language-specs/test-full.lang \ + setup-file-saver.sh \ + styles/classic.xml \ + styles/test.xml + +if INSTALLED_TESTS +insttestdir = $(libexecdir)/installed-tests/$(PACKAGE)-@GSV_API_VERSION@ +insttest_PROGRAMS = $(UNIT_TEST_PROGS) + +insttestlangdir = $(libexecdir)/installed-tests/$(PACKAGE)-@GSV_API_VERSION@/language-specs +insttestlang_DATA = \ + language-specs/test-empty.lang \ + language-specs/test-full.lang + +instteststyledir = $(libexecdir)/installed-tests/$(PACKAGE)-@GSV_API_VERSION@/styles +instteststyle_DATA = \ + styles/classic.xml \ + styles/test.xml + +%.test: %$(EXEEXT) Makefile + $(AM_V_GEN) (echo '[Test]' > $@.tmp; \ + echo 'Description=GtkSourceView test' >> $@.tmp; \ + echo 'Exec=$(insttestdir)/$<' >> $@.tmp; \ + echo 'Type=session' >> $@.tmp; \ + echo 'Output=TAP' >> $@.tmp; \ + mv $@.tmp $@) + +test_files = $(UNIT_TEST_PROGS:=.test) + +DISTCLEANFILES = $(test_files) + +testmetadir = $(datadir)/installed-tests/$(PACKAGE)-@GSV_API_VERSION@ +testmeta_DATA = $(test_files) + +endif # INSTALLED_TESTS + +-include $(top_srcdir)/git.mk diff --git a/testsuite/Makefile.in b/testsuite/Makefile.in new file mode 100644 index 0000000..6843926 --- /dev/null +++ b/testsuite/Makefile.in @@ -0,0 +1,1733 @@ +# Makefile.in generated by automake 1.15.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2017 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +TESTS = $(am__EXEEXT_1) +noinst_PROGRAMS = $(am__EXEEXT_1) +@INSTALLED_TESTS_TRUE@insttest_PROGRAMS = $(am__EXEEXT_1) +subdir = testsuite +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_append_compile_flags.m4 \ + $(top_srcdir)/m4/ax_append_flag.m4 \ + $(top_srcdir)/m4/ax_append_link_flags.m4 \ + $(top_srcdir)/m4/ax_check_compile_flag.m4 \ + $(top_srcdir)/m4/ax_check_link_flag.m4 \ + $(top_srcdir)/m4/ax_code_coverage.m4 \ + $(top_srcdir)/m4/ax_compiler_flags.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_cflags.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_gir.m4 \ + $(top_srcdir)/m4/ax_compiler_flags_ldflags.m4 \ + $(top_srcdir)/m4/ax_is_release.m4 \ + $(top_srcdir)/m4/ax_pkg_check_modules.m4 \ + $(top_srcdir)/m4/ax_require_defined.m4 \ + $(top_srcdir)/m4/ax_valgrind_check.m4 \ + $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gtk-3.0.m4 \ + $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/iconv.m4 \ + $(top_srcdir)/m4/intlmacosx.m4 \ + $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \ + $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ + $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \ + $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/vapigen.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__EXEEXT_1 = test-buffer$(EXEEXT) test-buffer-input-stream$(EXEEXT) \ + test-buffer-output-stream$(EXEEXT) \ + test-completion-model$(EXEEXT) test-completion-words$(EXEEXT) \ + test-encoding$(EXEEXT) test-file-loader$(EXEEXT) \ + test-file-saver$(EXEEXT) test-iter$(EXEEXT) \ + test-language$(EXEEXT) test-languagemanager$(EXEEXT) \ + test-mark$(EXEEXT) test-printcompositor$(EXEEXT) \ + test-regex$(EXEEXT) test-region$(EXEEXT) \ + test-search-context$(EXEEXT) test-space-drawer$(EXEEXT) \ + test-stylescheme$(EXEEXT) test-styleschememanager$(EXEEXT) \ + test-undo-manager$(EXEEXT) test-utils$(EXEEXT) \ + test-view$(EXEEXT) +am__installdirs = "$(DESTDIR)$(insttestdir)" \ + "$(DESTDIR)$(insttestlangdir)" "$(DESTDIR)$(instteststyledir)" \ + "$(DESTDIR)$(testmetadir)" +PROGRAMS = $(insttest_PROGRAMS) $(noinst_PROGRAMS) +am_test_buffer_OBJECTS = test-buffer.$(OBJEXT) +test_buffer_OBJECTS = $(am_test_buffer_OBJECTS) +test_buffer_LDADD = $(LDADD) +am__DEPENDENCIES_1 = +test_buffer_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +AM_V_lt = $(am__v_lt_@AM_V@) +am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) +am__v_lt_0 = --silent +am__v_lt_1 = +am_test_buffer_input_stream_OBJECTS = \ + test-buffer-input-stream.$(OBJEXT) +test_buffer_input_stream_OBJECTS = \ + $(am_test_buffer_input_stream_OBJECTS) +test_buffer_input_stream_LDADD = $(LDADD) +test_buffer_input_stream_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_buffer_output_stream_OBJECTS = \ + test-buffer-output-stream.$(OBJEXT) +test_buffer_output_stream_OBJECTS = \ + $(am_test_buffer_output_stream_OBJECTS) +test_buffer_output_stream_LDADD = $(LDADD) +test_buffer_output_stream_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_completion_model_OBJECTS = test-completion-model.$(OBJEXT) +test_completion_model_OBJECTS = $(am_test_completion_model_OBJECTS) +test_completion_model_LDADD = $(LDADD) +test_completion_model_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_completion_words_OBJECTS = test-completion-words.$(OBJEXT) +test_completion_words_OBJECTS = $(am_test_completion_words_OBJECTS) +test_completion_words_LDADD = $(LDADD) +test_completion_words_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_encoding_OBJECTS = test-encoding.$(OBJEXT) +test_encoding_OBJECTS = $(am_test_encoding_OBJECTS) +test_encoding_LDADD = $(LDADD) +test_encoding_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_file_loader_OBJECTS = test-file-loader.$(OBJEXT) +test_file_loader_OBJECTS = $(am_test_file_loader_OBJECTS) +test_file_loader_LDADD = $(LDADD) +test_file_loader_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_file_saver_OBJECTS = test-file-saver.$(OBJEXT) +test_file_saver_OBJECTS = $(am_test_file_saver_OBJECTS) +test_file_saver_LDADD = $(LDADD) +test_file_saver_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_iter_OBJECTS = test-iter.$(OBJEXT) +test_iter_OBJECTS = $(am_test_iter_OBJECTS) +test_iter_LDADD = $(LDADD) +test_iter_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_language_OBJECTS = test-language.$(OBJEXT) +test_language_OBJECTS = $(am_test_language_OBJECTS) +test_language_LDADD = $(LDADD) +test_language_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_languagemanager_OBJECTS = test-languagemanager.$(OBJEXT) +test_languagemanager_OBJECTS = $(am_test_languagemanager_OBJECTS) +test_languagemanager_LDADD = $(LDADD) +test_languagemanager_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_mark_OBJECTS = test-mark.$(OBJEXT) +test_mark_OBJECTS = $(am_test_mark_OBJECTS) +test_mark_LDADD = $(LDADD) +test_mark_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_printcompositor_OBJECTS = test-printcompositor.$(OBJEXT) +test_printcompositor_OBJECTS = $(am_test_printcompositor_OBJECTS) +test_printcompositor_LDADD = $(LDADD) +test_printcompositor_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_regex_OBJECTS = test-regex.$(OBJEXT) +test_regex_OBJECTS = $(am_test_regex_OBJECTS) +test_regex_LDADD = $(LDADD) +test_regex_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_region_OBJECTS = test-region.$(OBJEXT) +test_region_OBJECTS = $(am_test_region_OBJECTS) +test_region_LDADD = $(LDADD) +test_region_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_search_context_OBJECTS = test-search-context.$(OBJEXT) +test_search_context_OBJECTS = $(am_test_search_context_OBJECTS) +test_search_context_LDADD = $(LDADD) +test_search_context_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_space_drawer_OBJECTS = test-space-drawer.$(OBJEXT) +test_space_drawer_OBJECTS = $(am_test_space_drawer_OBJECTS) +test_space_drawer_LDADD = $(LDADD) +test_space_drawer_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_stylescheme_OBJECTS = test-stylescheme.$(OBJEXT) +test_stylescheme_OBJECTS = $(am_test_stylescheme_OBJECTS) +test_stylescheme_LDADD = $(LDADD) +test_stylescheme_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_styleschememanager_OBJECTS = \ + test-styleschememanager.$(OBJEXT) +test_styleschememanager_OBJECTS = \ + $(am_test_styleschememanager_OBJECTS) +test_styleschememanager_LDADD = $(LDADD) +test_styleschememanager_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_undo_manager_OBJECTS = test-undo-manager.$(OBJEXT) +test_undo_manager_OBJECTS = $(am_test_undo_manager_OBJECTS) +test_undo_manager_LDADD = $(LDADD) +test_undo_manager_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_utils_OBJECTS = test-utils.$(OBJEXT) +test_utils_OBJECTS = $(am_test_utils_OBJECTS) +test_utils_LDADD = $(LDADD) +test_utils_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +am_test_view_OBJECTS = test-view.$(OBJEXT) +test_view_OBJECTS = $(am_test_view_OBJECTS) +test_view_LDADD = $(LDADD) +test_view_DEPENDENCIES = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + $(am__DEPENDENCIES_1) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(test_buffer_SOURCES) $(test_buffer_input_stream_SOURCES) \ + $(test_buffer_output_stream_SOURCES) \ + $(test_completion_model_SOURCES) \ + $(test_completion_words_SOURCES) $(test_encoding_SOURCES) \ + $(test_file_loader_SOURCES) $(test_file_saver_SOURCES) \ + $(test_iter_SOURCES) $(test_language_SOURCES) \ + $(test_languagemanager_SOURCES) $(test_mark_SOURCES) \ + $(test_printcompositor_SOURCES) $(test_regex_SOURCES) \ + $(test_region_SOURCES) $(test_search_context_SOURCES) \ + $(test_space_drawer_SOURCES) $(test_stylescheme_SOURCES) \ + $(test_styleschememanager_SOURCES) \ + $(test_undo_manager_SOURCES) $(test_utils_SOURCES) \ + $(test_view_SOURCES) +DIST_SOURCES = $(test_buffer_SOURCES) \ + $(test_buffer_input_stream_SOURCES) \ + $(test_buffer_output_stream_SOURCES) \ + $(test_completion_model_SOURCES) \ + $(test_completion_words_SOURCES) $(test_encoding_SOURCES) \ + $(test_file_loader_SOURCES) $(test_file_saver_SOURCES) \ + $(test_iter_SOURCES) $(test_language_SOURCES) \ + $(test_languagemanager_SOURCES) $(test_mark_SOURCES) \ + $(test_printcompositor_SOURCES) $(test_regex_SOURCES) \ + $(test_region_SOURCES) $(test_search_context_SOURCES) \ + $(test_space_drawer_SOURCES) $(test_stylescheme_SOURCES) \ + $(test_styleschememanager_SOURCES) \ + $(test_undo_manager_SOURCES) $(test_utils_SOURCES) \ + $(test_view_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +DATA = $(insttestlang_DATA) $(instteststyle_DATA) $(testmeta_DATA) +am__extra_recursive_targets = check-valgrind-recursive \ + check-valgrind-memcheck-recursive \ + check-valgrind-helgrind-recursive check-valgrind-drd-recursive \ + check-valgrind-sgcheck-recursive +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +am__tty_colors_dummy = \ + mgn= red= grn= lgn= blu= brg= std=; \ + am__color_tests=no +am__tty_colors = { \ + $(am__tty_colors_dummy); \ + if test "X$(AM_COLOR_TESTS)" = Xno; then \ + am__color_tests=no; \ + elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ + am__color_tests=yes; \ + elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ + am__color_tests=yes; \ + fi; \ + if test $$am__color_tests = yes; then \ + red=''; \ + grn=''; \ + lgn=''; \ + blu=''; \ + mgn=''; \ + brg=''; \ + std=''; \ + fi; \ +} +am__recheck_rx = ^[ ]*:recheck:[ ]* +am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* +am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* +# A command that, given a newline-separated list of test names on the +# standard input, print the name of the tests that are to be re-run +# upon "make recheck". +am__list_recheck_tests = $(AWK) '{ \ + recheck = 1; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + { \ + if ((getline line2 < ($$0 ".log")) < 0) \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ + { \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ + { \ + break; \ + } \ + }; \ + if (recheck) \ + print $$0; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# A command that, given a newline-separated list of test names on the +# standard input, create the global log from their .trs and .log files. +am__create_global_log = $(AWK) ' \ +function fatal(msg) \ +{ \ + print "fatal: making $@: " msg | "cat >&2"; \ + exit 1; \ +} \ +function rst_section(header) \ +{ \ + print header; \ + len = length(header); \ + for (i = 1; i <= len; i = i + 1) \ + printf "="; \ + printf "\n\n"; \ +} \ +{ \ + copy_in_global_log = 1; \ + global_test_result = "RUN"; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".trs"); \ + if (line ~ /$(am__global_test_result_rx)/) \ + { \ + sub("$(am__global_test_result_rx)", "", line); \ + sub("[ ]*$$", "", line); \ + global_test_result = line; \ + } \ + else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ + copy_in_global_log = 0; \ + }; \ + if (copy_in_global_log) \ + { \ + rst_section(global_test_result ": " $$0); \ + while ((rc = (getline line < ($$0 ".log"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".log"); \ + print line; \ + }; \ + printf "\n"; \ + }; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# Restructured Text title. +am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } +# Solaris 10 'make', and several other traditional 'make' implementations, +# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it +# by disabling -e (using the XSI extension "set +e") if it's set. +am__sh_e_setup = case $$- in *e*) set +e;; esac +# Default flags passed to test drivers. +am__common_driver_flags = \ + --color-tests "$$am__color_tests" \ + --enable-hard-errors "$$am__enable_hard_errors" \ + --expect-failure "$$am__expect_failure" +# To be inserted before the command running the test. Creates the +# directory for the log if needed. Stores in $dir the directory +# containing $f, in $tst the test, in $log the log. Executes the +# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and +# passes TESTS_ENVIRONMENT. Set up options for the wrapper that +# will run the test scripts (or their associated LOG_COMPILER, if +# thy have one). +am__check_pre = \ +$(am__sh_e_setup); \ +$(am__vpath_adj_setup) $(am__vpath_adj) \ +$(am__tty_colors); \ +srcdir=$(srcdir); export srcdir; \ +case "$@" in \ + */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ + *) am__odir=.;; \ +esac; \ +test "x$$am__odir" = x"." || test -d "$$am__odir" \ + || $(MKDIR_P) "$$am__odir" || exit $$?; \ +if test -f "./$$f"; then dir=./; \ +elif test -f "$$f"; then dir=; \ +else dir="$(srcdir)/"; fi; \ +tst=$$dir$$f; log='$@'; \ +if test -n '$(DISABLE_HARD_ERRORS)'; then \ + am__enable_hard_errors=no; \ +else \ + am__enable_hard_errors=yes; \ +fi; \ +case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ + am__expect_failure=yes;; \ + *) \ + am__expect_failure=no;; \ +esac; \ +$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) +# A shell command to get the names of the tests scripts with any registered +# extension removed (i.e., equivalently, the names of the test logs, with +# the '.log' extension removed). The result is saved in the shell variable +# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, +# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", +# since that might cause problem with VPATH rewrites for suffix-less tests. +# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. +am__set_TESTS_bases = \ + bases='$(TEST_LOGS)'; \ + bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ + bases=`echo $$bases` +RECHECK_LOGS = $(TEST_LOGS) +AM_RECURSIVE_TARGETS = check recheck +TEST_SUITE_LOG = test-suite.log +TEST_EXTENSIONS = @EXEEXT@ .test +LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver +LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) +am__set_b = \ + case '$@' in \ + */*) \ + case '$*' in \ + */*) b='$*';; \ + *) b=`echo '$@' | sed 's/\.log$$//'`; \ + esac;; \ + *) \ + b='$*';; \ + esac +am__test_logs1 = $(TESTS:=.log) +am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) +TEST_LOGS = $(am__test_logs2:.test.log=.log) +TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver +TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ + $(TEST_LOG_FLAGS) +am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp \ + $(top_srcdir)/test-driver +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ABS_TOP_SRCDIR = @ABS_TOP_SRCDIR@ +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +AX_PACKAGE_REQUIRES = @AX_PACKAGE_REQUIRES@ +AX_PACKAGE_REQUIRES_PRIVATE = @AX_PACKAGE_REQUIRES_PRIVATE@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@ +CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@ +CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@ +CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@ +CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@ +CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DEP_CFLAGS = @DEP_CFLAGS@ +DEP_LIBS = @DEP_LIBS@ +DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ENABLE_VALGRIND_drd = @ENABLE_VALGRIND_drd@ +ENABLE_VALGRIND_helgrind = @ENABLE_VALGRIND_helgrind@ +ENABLE_VALGRIND_memcheck = @ENABLE_VALGRIND_memcheck@ +ENABLE_VALGRIND_sgcheck = @ENABLE_VALGRIND_sgcheck@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GCOV = @GCOV@ +GENHTML = @GENHTML@ +GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ +GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +GLADE_CATALOG_DIR = @GLADE_CATALOG_DIR@ +GLADE_CFLAGS = @GLADE_CFLAGS@ +GLADE_LIBS = @GLADE_LIBS@ +GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@ +GLIB_MKENUMS = @GLIB_MKENUMS@ +GMSGFMT = @GMSGFMT@ +GMSGFMT_015 = @GMSGFMT_015@ +GREP = @GREP@ +GSV_API_VERSION = @GSV_API_VERSION@ +GSV_LT_VERSION = @GSV_LT_VERSION@ +GSV_MAJOR_API_VERSION = @GSV_MAJOR_API_VERSION@ +GTKDOC_CHECK = @GTKDOC_CHECK@ +GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@ +GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ +GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ +GTKDOC_MKPDF = @GTKDOC_MKPDF@ +GTKDOC_REBASE = @GTKDOC_REBASE@ +GTK_SOURCE_MAJOR_VERSION = @GTK_SOURCE_MAJOR_VERSION@ +GTK_SOURCE_MICRO_VERSION = @GTK_SOURCE_MICRO_VERSION@ +GTK_SOURCE_MINOR_VERSION = @GTK_SOURCE_MINOR_VERSION@ +HIDDEN_VISIBILITY_CFLAGS = @HIDDEN_VISIBILITY_CFLAGS@ +HTML_DIR = @HTML_DIR@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ +INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@ +INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@ +INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@ +INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@ +INTROSPECTION_LIBS = @INTROSPECTION_LIBS@ +INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@ +INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@ +INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@ +ITSTOOL = @ITSTOOL@ +LCOV = @LCOV@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +MSGFMT = @MSGFMT@ +MSGFMT_015 = @MSGFMT_015@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +POSUB = @POSUB@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VALGRIND = @VALGRIND@ +VALGRIND_ENABLED = @VALGRIND_ENABLED@ +VAPIGEN = @VAPIGEN@ +VAPIGEN_MAKEFILE = @VAPIGEN_MAKEFILE@ +VAPIGEN_VAPIDIR = @VAPIGEN_VAPIDIR@ +VERSION = @VERSION@ +WARN_CFLAGS = @WARN_CFLAGS@ +WARN_LDFLAGS = @WARN_LDFLAGS@ +WARN_SCANNERFLAGS = @WARN_SCANNERFLAGS@ +XGETTEXT = @XGETTEXT@ +XGETTEXT_015 = @XGETTEXT_015@ +XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +pkgconfigdir = @pkgconfigdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +valgrind_enabled_tools = @valgrind_enabled_tools@ +valgrind_tools = @valgrind_tools@ + +# https://github.com/pwithnall/walbottle +# https://github.com/dtrebbien/GNOME.supp +VALGRIND_SUPPRESSIONS_FILES = \ + $(top_srcdir)/../walbottle/libwalbottle/tests/walbottle.supp \ + $(top_srcdir)/../GNOME.supp/build/base.supp \ + $(top_srcdir)/../GNOME.supp/build/pango.supp \ + $(top_srcdir)/../GNOME.supp/build/gdk.supp \ + $(top_srcdir)/../GNOME.supp/build/gtk3.supp + +AM_CPPFLAGS = \ + -DG_LOG_DOMAIN=\"GtkSourceView\"\ + -I$(top_srcdir) -I$(srcdir) \ + -DTOP_SRCDIR=\""$(ABS_TOP_SRCDIR)"\"\ + $(DISABLE_DEPRECATED_CFLAGS) \ + $(WARN_CFLAGS) \ + $(DEP_CFLAGS) \ + $(TESTS_CFLAGS) + +AM_LDFLAGS = $(WARN_LDFLAGS) +LDADD = $(top_builddir)/gtksourceview/completion-providers/words/libgtksourcecompletionwords.la \ + $(top_builddir)/gtksourceview/libgtksourceview-core.la \ + -lm \ + $(DEP_LIBS) \ + $(TESTS_LIBS) + +UNIT_TEST_PROGS = test-buffer test-buffer-input-stream \ + test-buffer-output-stream test-completion-model \ + test-completion-words test-encoding test-file-loader \ + test-file-saver test-iter test-language test-languagemanager \ + test-mark test-printcompositor test-regex test-region \ + test-search-context test-space-drawer test-stylescheme \ + test-styleschememanager test-undo-manager test-utils test-view +test_buffer_SOURCES = test-buffer.c +test_buffer_input_stream_SOURCES = test-buffer-input-stream.c +test_buffer_output_stream_SOURCES = test-buffer-output-stream.c +test_completion_model_SOURCES = test-completion-model.c +test_completion_words_SOURCES = test-completion-words.c +test_encoding_SOURCES = test-encoding.c +test_file_loader_SOURCES = test-file-loader.c +test_file_saver_SOURCES = test-file-saver.c +test_iter_SOURCES = test-iter.c +test_language_SOURCES = test-language.c +test_languagemanager_SOURCES = test-languagemanager.c +test_mark_SOURCES = test-mark.c +test_printcompositor_SOURCES = test-printcompositor.c +test_regex_SOURCES = test-regex.c +test_region_SOURCES = test-region.c +test_search_context_SOURCES = test-search-context.c +test_space_drawer_SOURCES = test-space-drawer.c +test_stylescheme_SOURCES = test-stylescheme.c +test_styleschememanager_SOURCES = test-styleschememanager.c +test_undo_manager_SOURCES = test-undo-manager.c +test_utils_SOURCES = test-utils.c +test_view_SOURCES = test-view.c +TESTS_ENVIRONMENT = G_TEST_SRCDIR="$(abs_srcdir)" +EXTRA_DIST = \ + language-specs/test-empty.lang \ + language-specs/test-full.lang \ + setup-file-saver.sh \ + styles/classic.xml \ + styles/test.xml + +@INSTALLED_TESTS_TRUE@insttestdir = $(libexecdir)/installed-tests/$(PACKAGE)-@GSV_API_VERSION@ +@INSTALLED_TESTS_TRUE@insttestlangdir = $(libexecdir)/installed-tests/$(PACKAGE)-@GSV_API_VERSION@/language-specs +@INSTALLED_TESTS_TRUE@insttestlang_DATA = \ +@INSTALLED_TESTS_TRUE@ language-specs/test-empty.lang \ +@INSTALLED_TESTS_TRUE@ language-specs/test-full.lang + +@INSTALLED_TESTS_TRUE@instteststyledir = $(libexecdir)/installed-tests/$(PACKAGE)-@GSV_API_VERSION@/styles +@INSTALLED_TESTS_TRUE@instteststyle_DATA = \ +@INSTALLED_TESTS_TRUE@ styles/classic.xml \ +@INSTALLED_TESTS_TRUE@ styles/test.xml + +@INSTALLED_TESTS_TRUE@test_files = $(UNIT_TEST_PROGS:=.test) +@INSTALLED_TESTS_TRUE@DISTCLEANFILES = $(test_files) +@INSTALLED_TESTS_TRUE@testmetadir = $(datadir)/installed-tests/$(PACKAGE)-@GSV_API_VERSION@ +@INSTALLED_TESTS_TRUE@testmeta_DATA = $(test_files) +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu testsuite/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu testsuite/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-insttestPROGRAMS: $(insttest_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(insttest_PROGRAMS)'; test -n "$(insttestdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(insttestdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(insttestdir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p \ + || test -f $$p1 \ + ; then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' \ + -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(insttestdir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(insttestdir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-insttestPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(insttest_PROGRAMS)'; test -n "$(insttestdir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' \ + `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(insttestdir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(insttestdir)" && rm -f $$files + +clean-insttestPROGRAMS: + @list='$(insttest_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list + +test-buffer$(EXEEXT): $(test_buffer_OBJECTS) $(test_buffer_DEPENDENCIES) $(EXTRA_test_buffer_DEPENDENCIES) + @rm -f test-buffer$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_buffer_OBJECTS) $(test_buffer_LDADD) $(LIBS) + +test-buffer-input-stream$(EXEEXT): $(test_buffer_input_stream_OBJECTS) $(test_buffer_input_stream_DEPENDENCIES) $(EXTRA_test_buffer_input_stream_DEPENDENCIES) + @rm -f test-buffer-input-stream$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_buffer_input_stream_OBJECTS) $(test_buffer_input_stream_LDADD) $(LIBS) + +test-buffer-output-stream$(EXEEXT): $(test_buffer_output_stream_OBJECTS) $(test_buffer_output_stream_DEPENDENCIES) $(EXTRA_test_buffer_output_stream_DEPENDENCIES) + @rm -f test-buffer-output-stream$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_buffer_output_stream_OBJECTS) $(test_buffer_output_stream_LDADD) $(LIBS) + +test-completion-model$(EXEEXT): $(test_completion_model_OBJECTS) $(test_completion_model_DEPENDENCIES) $(EXTRA_test_completion_model_DEPENDENCIES) + @rm -f test-completion-model$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_completion_model_OBJECTS) $(test_completion_model_LDADD) $(LIBS) + +test-completion-words$(EXEEXT): $(test_completion_words_OBJECTS) $(test_completion_words_DEPENDENCIES) $(EXTRA_test_completion_words_DEPENDENCIES) + @rm -f test-completion-words$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_completion_words_OBJECTS) $(test_completion_words_LDADD) $(LIBS) + +test-encoding$(EXEEXT): $(test_encoding_OBJECTS) $(test_encoding_DEPENDENCIES) $(EXTRA_test_encoding_DEPENDENCIES) + @rm -f test-encoding$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_encoding_OBJECTS) $(test_encoding_LDADD) $(LIBS) + +test-file-loader$(EXEEXT): $(test_file_loader_OBJECTS) $(test_file_loader_DEPENDENCIES) $(EXTRA_test_file_loader_DEPENDENCIES) + @rm -f test-file-loader$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_file_loader_OBJECTS) $(test_file_loader_LDADD) $(LIBS) + +test-file-saver$(EXEEXT): $(test_file_saver_OBJECTS) $(test_file_saver_DEPENDENCIES) $(EXTRA_test_file_saver_DEPENDENCIES) + @rm -f test-file-saver$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_file_saver_OBJECTS) $(test_file_saver_LDADD) $(LIBS) + +test-iter$(EXEEXT): $(test_iter_OBJECTS) $(test_iter_DEPENDENCIES) $(EXTRA_test_iter_DEPENDENCIES) + @rm -f test-iter$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_iter_OBJECTS) $(test_iter_LDADD) $(LIBS) + +test-language$(EXEEXT): $(test_language_OBJECTS) $(test_language_DEPENDENCIES) $(EXTRA_test_language_DEPENDENCIES) + @rm -f test-language$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_language_OBJECTS) $(test_language_LDADD) $(LIBS) + +test-languagemanager$(EXEEXT): $(test_languagemanager_OBJECTS) $(test_languagemanager_DEPENDENCIES) $(EXTRA_test_languagemanager_DEPENDENCIES) + @rm -f test-languagemanager$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_languagemanager_OBJECTS) $(test_languagemanager_LDADD) $(LIBS) + +test-mark$(EXEEXT): $(test_mark_OBJECTS) $(test_mark_DEPENDENCIES) $(EXTRA_test_mark_DEPENDENCIES) + @rm -f test-mark$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_mark_OBJECTS) $(test_mark_LDADD) $(LIBS) + +test-printcompositor$(EXEEXT): $(test_printcompositor_OBJECTS) $(test_printcompositor_DEPENDENCIES) $(EXTRA_test_printcompositor_DEPENDENCIES) + @rm -f test-printcompositor$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_printcompositor_OBJECTS) $(test_printcompositor_LDADD) $(LIBS) + +test-regex$(EXEEXT): $(test_regex_OBJECTS) $(test_regex_DEPENDENCIES) $(EXTRA_test_regex_DEPENDENCIES) + @rm -f test-regex$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_regex_OBJECTS) $(test_regex_LDADD) $(LIBS) + +test-region$(EXEEXT): $(test_region_OBJECTS) $(test_region_DEPENDENCIES) $(EXTRA_test_region_DEPENDENCIES) + @rm -f test-region$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_region_OBJECTS) $(test_region_LDADD) $(LIBS) + +test-search-context$(EXEEXT): $(test_search_context_OBJECTS) $(test_search_context_DEPENDENCIES) $(EXTRA_test_search_context_DEPENDENCIES) + @rm -f test-search-context$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_search_context_OBJECTS) $(test_search_context_LDADD) $(LIBS) + +test-space-drawer$(EXEEXT): $(test_space_drawer_OBJECTS) $(test_space_drawer_DEPENDENCIES) $(EXTRA_test_space_drawer_DEPENDENCIES) + @rm -f test-space-drawer$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_space_drawer_OBJECTS) $(test_space_drawer_LDADD) $(LIBS) + +test-stylescheme$(EXEEXT): $(test_stylescheme_OBJECTS) $(test_stylescheme_DEPENDENCIES) $(EXTRA_test_stylescheme_DEPENDENCIES) + @rm -f test-stylescheme$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_stylescheme_OBJECTS) $(test_stylescheme_LDADD) $(LIBS) + +test-styleschememanager$(EXEEXT): $(test_styleschememanager_OBJECTS) $(test_styleschememanager_DEPENDENCIES) $(EXTRA_test_styleschememanager_DEPENDENCIES) + @rm -f test-styleschememanager$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_styleschememanager_OBJECTS) $(test_styleschememanager_LDADD) $(LIBS) + +test-undo-manager$(EXEEXT): $(test_undo_manager_OBJECTS) $(test_undo_manager_DEPENDENCIES) $(EXTRA_test_undo_manager_DEPENDENCIES) + @rm -f test-undo-manager$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_undo_manager_OBJECTS) $(test_undo_manager_LDADD) $(LIBS) + +test-utils$(EXEEXT): $(test_utils_OBJECTS) $(test_utils_DEPENDENCIES) $(EXTRA_test_utils_DEPENDENCIES) + @rm -f test-utils$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_utils_OBJECTS) $(test_utils_LDADD) $(LIBS) + +test-view$(EXEEXT): $(test_view_OBJECTS) $(test_view_DEPENDENCIES) $(EXTRA_test_view_DEPENDENCIES) + @rm -f test-view$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(test_view_OBJECTS) $(test_view_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-buffer-input-stream.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-buffer-output-stream.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-buffer.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-completion-model.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-completion-words.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-encoding.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-file-loader.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-file-saver.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-iter.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-language.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-languagemanager.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-mark.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-printcompositor.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-regex.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-region.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-search-context.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-space-drawer.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-stylescheme.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-styleschememanager.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-undo-manager.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-utils.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-view.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-insttestlangDATA: $(insttestlang_DATA) + @$(NORMAL_INSTALL) + @list='$(insttestlang_DATA)'; test -n "$(insttestlangdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(insttestlangdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(insttestlangdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(insttestlangdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(insttestlangdir)" || exit $$?; \ + done + +uninstall-insttestlangDATA: + @$(NORMAL_UNINSTALL) + @list='$(insttestlang_DATA)'; test -n "$(insttestlangdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(insttestlangdir)'; $(am__uninstall_files_from_dir) +install-instteststyleDATA: $(instteststyle_DATA) + @$(NORMAL_INSTALL) + @list='$(instteststyle_DATA)'; test -n "$(instteststyledir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(instteststyledir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(instteststyledir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(instteststyledir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(instteststyledir)" || exit $$?; \ + done + +uninstall-instteststyleDATA: + @$(NORMAL_UNINSTALL) + @list='$(instteststyle_DATA)'; test -n "$(instteststyledir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(instteststyledir)'; $(am__uninstall_files_from_dir) +install-testmetaDATA: $(testmeta_DATA) + @$(NORMAL_INSTALL) + @list='$(testmeta_DATA)'; test -n "$(testmetadir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(testmetadir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(testmetadir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(testmetadir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(testmetadir)" || exit $$?; \ + done + +uninstall-testmetaDATA: + @$(NORMAL_UNINSTALL) + @list='$(testmeta_DATA)'; test -n "$(testmetadir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(testmetadir)'; $(am__uninstall_files_from_dir) +check-valgrind-local: +check-valgrind-memcheck-local: +check-valgrind-helgrind-local: +check-valgrind-drd-local: +check-valgrind-sgcheck-local: + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +# Recover from deleted '.trs' file; this should ensure that +# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create +# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells +# to avoid problems with "make -n". +.log.trs: + rm -f $< $@ + $(MAKE) $(AM_MAKEFLAGS) $< + +# Leading 'am--fnord' is there to ensure the list of targets does not +# expand to empty, as could happen e.g. with make check TESTS=''. +am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) +am--force-recheck: + @: + +$(TEST_SUITE_LOG): $(TEST_LOGS) + @$(am__set_TESTS_bases); \ + am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ + redo_bases=`for i in $$bases; do \ + am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ + done`; \ + if test -n "$$redo_bases"; then \ + redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ + redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ + if $(am__make_dryrun); then :; else \ + rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ + fi; \ + fi; \ + if test -n "$$am__remaking_logs"; then \ + echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ + "recursion detected" >&2; \ + elif test -n "$$redo_logs"; then \ + am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ + fi; \ + if $(am__make_dryrun); then :; else \ + st=0; \ + errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ + for i in $$redo_bases; do \ + test -f $$i.trs && test -r $$i.trs \ + || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ + test -f $$i.log && test -r $$i.log \ + || { echo "$$errmsg $$i.log" >&2; st=1; }; \ + done; \ + test $$st -eq 0 || exit 1; \ + fi + @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ + ws='[ ]'; \ + results=`for b in $$bases; do echo $$b.trs; done`; \ + test -n "$$results" || results=/dev/null; \ + all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ + pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ + fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ + skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ + xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ + xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ + error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ + if test `expr $$fail + $$xpass + $$error` -eq 0; then \ + success=true; \ + else \ + success=false; \ + fi; \ + br='==================='; br=$$br$$br$$br$$br; \ + result_count () \ + { \ + if test x"$$1" = x"--maybe-color"; then \ + maybe_colorize=yes; \ + elif test x"$$1" = x"--no-color"; then \ + maybe_colorize=no; \ + else \ + echo "$@: invalid 'result_count' usage" >&2; exit 4; \ + fi; \ + shift; \ + desc=$$1 count=$$2; \ + if test $$maybe_colorize = yes && test $$count -gt 0; then \ + color_start=$$3 color_end=$$std; \ + else \ + color_start= color_end=; \ + fi; \ + echo "$${color_start}# $$desc $$count$${color_end}"; \ + }; \ + create_testsuite_report () \ + { \ + result_count $$1 "TOTAL:" $$all "$$brg"; \ + result_count $$1 "PASS: " $$pass "$$grn"; \ + result_count $$1 "SKIP: " $$skip "$$blu"; \ + result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ + result_count $$1 "FAIL: " $$fail "$$red"; \ + result_count $$1 "XPASS:" $$xpass "$$red"; \ + result_count $$1 "ERROR:" $$error "$$mgn"; \ + }; \ + { \ + echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ + $(am__rst_title); \ + create_testsuite_report --no-color; \ + echo; \ + echo ".. contents:: :depth: 2"; \ + echo; \ + for b in $$bases; do echo $$b; done \ + | $(am__create_global_log); \ + } >$(TEST_SUITE_LOG).tmp || exit 1; \ + mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ + if $$success; then \ + col="$$grn"; \ + else \ + col="$$red"; \ + test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ + fi; \ + echo "$${col}$$br$${std}"; \ + echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ + echo "$${col}$$br$${std}"; \ + create_testsuite_report --maybe-color; \ + echo "$$col$$br$$std"; \ + if $$success; then :; else \ + echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ + if test -n "$(PACKAGE_BUGREPORT)"; then \ + echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ + fi; \ + echo "$$col$$br$$std"; \ + fi; \ + $$success || exit 1 + +check-TESTS: + @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list + @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + trs_list=`for i in $$bases; do echo $$i.trs; done`; \ + log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ + exit $$?; +recheck: all + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + bases=`for i in $$bases; do echo $$i; done \ + | $(am__list_recheck_tests)` || exit 1; \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + log_list=`echo $$log_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ + am__force_recheck=am--force-recheck \ + TEST_LOGS="$$log_list"; \ + exit $$? +test-buffer.log: test-buffer$(EXEEXT) + @p='test-buffer$(EXEEXT)'; \ + b='test-buffer'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-buffer-input-stream.log: test-buffer-input-stream$(EXEEXT) + @p='test-buffer-input-stream$(EXEEXT)'; \ + b='test-buffer-input-stream'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-buffer-output-stream.log: test-buffer-output-stream$(EXEEXT) + @p='test-buffer-output-stream$(EXEEXT)'; \ + b='test-buffer-output-stream'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-completion-model.log: test-completion-model$(EXEEXT) + @p='test-completion-model$(EXEEXT)'; \ + b='test-completion-model'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-completion-words.log: test-completion-words$(EXEEXT) + @p='test-completion-words$(EXEEXT)'; \ + b='test-completion-words'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-encoding.log: test-encoding$(EXEEXT) + @p='test-encoding$(EXEEXT)'; \ + b='test-encoding'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-file-loader.log: test-file-loader$(EXEEXT) + @p='test-file-loader$(EXEEXT)'; \ + b='test-file-loader'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-file-saver.log: test-file-saver$(EXEEXT) + @p='test-file-saver$(EXEEXT)'; \ + b='test-file-saver'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-iter.log: test-iter$(EXEEXT) + @p='test-iter$(EXEEXT)'; \ + b='test-iter'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-language.log: test-language$(EXEEXT) + @p='test-language$(EXEEXT)'; \ + b='test-language'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-languagemanager.log: test-languagemanager$(EXEEXT) + @p='test-languagemanager$(EXEEXT)'; \ + b='test-languagemanager'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-mark.log: test-mark$(EXEEXT) + @p='test-mark$(EXEEXT)'; \ + b='test-mark'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-printcompositor.log: test-printcompositor$(EXEEXT) + @p='test-printcompositor$(EXEEXT)'; \ + b='test-printcompositor'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-regex.log: test-regex$(EXEEXT) + @p='test-regex$(EXEEXT)'; \ + b='test-regex'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-region.log: test-region$(EXEEXT) + @p='test-region$(EXEEXT)'; \ + b='test-region'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-search-context.log: test-search-context$(EXEEXT) + @p='test-search-context$(EXEEXT)'; \ + b='test-search-context'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-space-drawer.log: test-space-drawer$(EXEEXT) + @p='test-space-drawer$(EXEEXT)'; \ + b='test-space-drawer'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-stylescheme.log: test-stylescheme$(EXEEXT) + @p='test-stylescheme$(EXEEXT)'; \ + b='test-stylescheme'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-styleschememanager.log: test-styleschememanager$(EXEEXT) + @p='test-styleschememanager$(EXEEXT)'; \ + b='test-styleschememanager'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-undo-manager.log: test-undo-manager$(EXEEXT) + @p='test-undo-manager$(EXEEXT)'; \ + b='test-undo-manager'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-utils.log: test-utils$(EXEEXT) + @p='test-utils$(EXEEXT)'; \ + b='test-utils'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +test-view.log: test-view$(EXEEXT) + @p='test-view$(EXEEXT)'; \ + b='test-view'; \ + $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +.test.log: + @p='$<'; \ + $(am__set_b); \ + $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +@am__EXEEXT_TRUE@.test$(EXEEXT).log: +@am__EXEEXT_TRUE@ @p='$<'; \ +@am__EXEEXT_TRUE@ $(am__set_b); \ +@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ +@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ +@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ +@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: check-am +all-am: Makefile $(PROGRAMS) $(DATA) +installdirs: + for dir in "$(DESTDIR)$(insttestdir)" "$(DESTDIR)$(insttestlangdir)" "$(DESTDIR)$(instteststyledir)" "$(DESTDIR)$(testmetadir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) + -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) + -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +check-valgrind: check-valgrind-am + +check-valgrind-am: check-valgrind-local + +check-valgrind-drd: check-valgrind-drd-am + +check-valgrind-drd-am: check-valgrind-drd-local + +check-valgrind-helgrind: check-valgrind-helgrind-am + +check-valgrind-helgrind-am: check-valgrind-helgrind-local + +check-valgrind-memcheck: check-valgrind-memcheck-am + +check-valgrind-memcheck-am: check-valgrind-memcheck-local + +check-valgrind-sgcheck: check-valgrind-sgcheck-am + +check-valgrind-sgcheck-am: check-valgrind-sgcheck-local + +clean: clean-am + +clean-am: clean-generic clean-insttestPROGRAMS clean-libtool \ + clean-noinstPROGRAMS mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-insttestPROGRAMS install-insttestlangDATA \ + install-instteststyleDATA install-testmetaDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-insttestPROGRAMS uninstall-insttestlangDATA \ + uninstall-instteststyleDATA uninstall-testmetaDATA + +.MAKE: check-am install-am install-strip + +.PHONY: CTAGS GTAGS TAGS all all-am check check-TESTS check-am \ + check-valgrind-am check-valgrind-drd-am \ + check-valgrind-drd-local check-valgrind-helgrind-am \ + check-valgrind-helgrind-local check-valgrind-local \ + check-valgrind-memcheck-am check-valgrind-memcheck-local \ + check-valgrind-sgcheck-am check-valgrind-sgcheck-local clean \ + clean-generic clean-insttestPROGRAMS clean-libtool \ + clean-noinstPROGRAMS cscopelist-am ctags ctags-am distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am \ + install-insttestPROGRAMS install-insttestlangDATA \ + install-instteststyleDATA install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + install-testmetaDATA installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am recheck tags tags-am uninstall \ + uninstall-am uninstall-insttestPROGRAMS \ + uninstall-insttestlangDATA uninstall-instteststyleDATA \ + uninstall-testmetaDATA + +.PRECIOUS: Makefile + +@CODE_COVERAGE_RULES@ + +@VALGRIND_CHECK_RULES@ + +@INSTALLED_TESTS_TRUE@%.test: %$(EXEEXT) Makefile +@INSTALLED_TESTS_TRUE@ $(AM_V_GEN) (echo '[Test]' > $@.tmp; \ +@INSTALLED_TESTS_TRUE@ echo 'Description=GtkSourceView test' >> $@.tmp; \ +@INSTALLED_TESTS_TRUE@ echo 'Exec=$(insttestdir)/$<' >> $@.tmp; \ +@INSTALLED_TESTS_TRUE@ echo 'Type=session' >> $@.tmp; \ +@INSTALLED_TESTS_TRUE@ echo 'Output=TAP' >> $@.tmp; \ +@INSTALLED_TESTS_TRUE@ mv $@.tmp $@) + +-include $(top_srcdir)/git.mk + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/testsuite/language-specs/test-empty.lang b/testsuite/language-specs/test-empty.lang new file mode 100644 index 0000000..56771f4 --- /dev/null +++ b/testsuite/language-specs/test-empty.lang @@ -0,0 +1,6 @@ + + diff --git a/testsuite/language-specs/test-full.lang b/testsuite/language-specs/test-full.lang new file mode 100644 index 0000000..4ef9b91 --- /dev/null +++ b/testsuite/language-specs/test-full.lang @@ -0,0 +1,34 @@ + + + + text/x-test;application/x-test + *.test;*.tst + extra + + + +