/* GTK - The GIMP Toolkit * gtkprintoperation.c: Print Operation * Copyright (C) 2006, Red Hat, Inc. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the * Free Software Foundation, Inc., 59 Temple Place - Suite 330, * Boston, MA 02111-1307, USA. */ #include "config.h" #include #include #include #include #include "gtkprintoperation-private.h" #include "gtkmarshalers.h" #include #include "gtkintl.h" #include "gtkprivate.h" #include "gtkmessagedialog.h" #include "gtkalias.h" #define SHOW_PROGRESS_TIME 1200 #define GTK_PRINT_OPERATION_GET_PRIVATE(obj)(G_TYPE_INSTANCE_GET_PRIVATE ((obj), GTK_TYPE_PRINT_OPERATION, GtkPrintOperationPrivate)) enum { DONE, BEGIN_PRINT, PAGINATE, REQUEST_PAGE_SETUP, DRAW_PAGE, END_PRINT, STATUS_CHANGED, CREATE_CUSTOM_WIDGET, CUSTOM_WIDGET_APPLY, PREVIEW, UPDATE_CUSTOM_WIDGET, LAST_SIGNAL }; enum { PROP_0, PROP_DEFAULT_PAGE_SETUP, PROP_PRINT_SETTINGS, PROP_JOB_NAME, PROP_N_PAGES, PROP_CURRENT_PAGE, PROP_USE_FULL_PAGE, PROP_TRACK_PRINT_STATUS, PROP_UNIT, PROP_SHOW_PROGRESS, PROP_ALLOW_ASYNC, PROP_EXPORT_FILENAME, PROP_STATUS, PROP_STATUS_STRING, PROP_CUSTOM_TAB_LABEL, PROP_EMBED_PAGE_SETUP, PROP_HAS_SELECTION, PROP_SUPPORT_SELECTION, PROP_N_PAGES_TO_PRINT }; static guint signals[LAST_SIGNAL] = { 0 }; static int job_nr = 0; typedef struct _PrintPagesData PrintPagesData; static void preview_iface_init (GtkPrintOperationPreviewIface *iface); static GtkPageSetup *create_page_setup (GtkPrintOperation *op); static void common_render_page (GtkPrintOperation *op, gint page_nr); static void increment_page_sequence (PrintPagesData *data); static void prepare_data (PrintPagesData *data); static void clamp_page_ranges (PrintPagesData *data); G_DEFINE_TYPE_WITH_CODE (GtkPrintOperation, gtk_print_operation, G_TYPE_OBJECT, G_IMPLEMENT_INTERFACE (GTK_TYPE_PRINT_OPERATION_PREVIEW, preview_iface_init)) /** * gtk_print_error_quark: * * Registers an error quark for #GtkPrintOperation if necessary. * * Return value: The error quark used for #GtkPrintOperation errors. * * Since: 2.10 **/ GQuark gtk_print_error_quark (void) { static GQuark quark = 0; if (quark == 0) quark = g_quark_from_static_string ("gtk-print-error-quark"); return quark; } static void gtk_print_operation_finalize (GObject *object) { GtkPrintOperation *print_operation = GTK_PRINT_OPERATION (object); GtkPrintOperationPrivate *priv = print_operation->priv; if (priv->free_platform_data && priv->platform_data) { priv->free_platform_data (priv->platform_data); priv->free_platform_data = NULL; } if (priv->default_page_setup) g_object_unref (priv->default_page_setup); if (priv->print_settings) g_object_unref (priv->print_settings); if (priv->print_context) g_object_unref (priv->print_context); g_free (priv->export_filename); g_free (priv->job_name); g_free (priv->custom_tab_label); g_free (priv->status_string); if (priv->print_pages_idle_id > 0) g_source_remove (priv->print_pages_idle_id); if (priv->show_progress_timeout_id > 0) g_source_remove (priv->show_progress_timeout_id); if (priv->error) g_error_free (priv->error); G_OBJECT_CLASS (gtk_print_operation_parent_class)->finalize (object); } static void gtk_print_operation_init (GtkPrintOperation *operation) { GtkPrintOperationPrivate *priv; const char *appname; priv = operation->priv = GTK_PRINT_OPERATION_GET_PRIVATE (operation); priv->status = GTK_PRINT_STATUS_INITIAL; priv->status_string = g_strdup (""); priv->default_page_setup = NULL; priv->print_settings = NULL; priv->nr_of_pages = -1; priv->nr_of_pages_to_print = -1; priv->page_position = -1; priv->current_page = -1; priv->use_full_page = FALSE; priv->show_progress = FALSE; priv->export_filename = NULL; priv->track_print_status = FALSE; priv->is_sync = FALSE; priv->support_selection = FALSE; priv->has_selection = FALSE; priv->embed_page_setup = FALSE; priv->page_drawing_state = GTK_PAGE_DRAWING_STATE_READY; priv->rloop = NULL; priv->unit = GTK_UNIT_PIXEL; appname = g_get_application_name (); if (appname == NULL) appname = ""; /* translators: this string is the default job title for print * jobs. %s gets replaced by the application name, %d gets replaced * by the job number. */ priv->job_name = g_strdup_printf (_("%s job #%d"), appname, ++job_nr); } static void preview_iface_render_page (GtkPrintOperationPreview *preview, gint page_nr) { GtkPrintOperation *op; op = GTK_PRINT_OPERATION (preview); common_render_page (op, page_nr); } static void preview_iface_end_preview (GtkPrintOperationPreview *preview) { GtkPrintOperation *op; op = GTK_PRINT_OPERATION (preview); g_signal_emit (op, signals[END_PRINT], 0, op->priv->print_context); if (op->priv->rloop) g_main_loop_quit (op->priv->rloop); if (op->priv->end_run) op->priv->end_run (op, op->priv->is_sync, TRUE); _gtk_print_operation_set_status (op, GTK_PRINT_STATUS_FINISHED, NULL); g_signal_emit (op, signals[DONE], 0, GTK_PRINT_OPERATION_RESULT_APPLY); } static gboolean preview_iface_is_selected (GtkPrintOperationPreview *preview, gint page_nr) { GtkPrintOperation *op; GtkPrintOperationPrivate *priv; int i; op = GTK_PRINT_OPERATION (preview); priv = op->priv; switch (priv->print_pages) { case GTK_PRINT_PAGES_SELECTION: case GTK_PRINT_PAGES_ALL: return (page_nr >= 0) && (page_nr < priv->nr_of_pages); case GTK_PRINT_PAGES_CURRENT: return page_nr == priv->current_page; case GTK_PRINT_PAGES_RANGES: for (i = 0; i < priv->num_page_ranges; i++) { if (page_nr >= priv->page_ranges[i].start && (page_nr <= priv->page_ranges[i].end || priv->page_ranges[i].end == -1)) return TRUE; } return FALSE; } return FALSE; } static void preview_iface_init (GtkPrintOperationPreviewIface *iface) { iface->render_page = preview_iface_render_page; iface->end_preview = preview_iface_end_preview; iface->is_selected = preview_iface_is_selected; } static void preview_start_page (GtkPrintOperation *op, GtkPrintContext *print_context, GtkPageSetup *page_setup) { if ((op->priv->manual_number_up < 2) || (op->priv->page_position % op->priv->manual_number_up == 0)) g_signal_emit_by_name (op, "got-page-size", print_context, page_setup); } static void preview_end_page (GtkPrintOperation *op, GtkPrintContext *print_context) { cairo_t *cr; cr = gtk_print_context_get_cairo_context (print_context); if ((op->priv->manual_number_up < 2) || ((op->priv->page_position + 1) % op->priv->manual_number_up == 0) || (op->priv->page_position == op->priv->nr_of_pages_to_print - 1)) cairo_show_page (cr); } static void preview_end_run (GtkPrintOperation *op, gboolean wait, gboolean cancelled) { g_free (op->priv->page_ranges); op->priv->page_ranges = NULL; } static void gtk_print_operation_set_property (GObject *object, guint prop_id, const GValue *value, GParamSpec *pspec) { GtkPrintOperation *op = GTK_PRINT_OPERATION (object); switch (prop_id) { case PROP_DEFAULT_PAGE_SETUP: gtk_print_operation_set_default_page_setup (op, g_value_get_object (value)); break; case PROP_PRINT_SETTINGS: gtk_print_operation_set_print_settings (op, g_value_get_object (value)); break; case PROP_JOB_NAME: gtk_print_operation_set_job_name (op, g_value_get_string (value)); break; case PROP_N_PAGES: gtk_print_operation_set_n_pages (op, g_value_get_int (value)); break; case PROP_CURRENT_PAGE: gtk_print_operation_set_current_page (op, g_value_get_int (value)); break; case PROP_USE_FULL_PAGE: gtk_print_operation_set_use_full_page (op, g_value_get_boolean (value)); break; case PROP_TRACK_PRINT_STATUS: gtk_print_operation_set_track_print_status (op, g_value_get_boolean (value)); break; case PROP_UNIT: gtk_print_operation_set_unit (op, g_value_get_enum (value)); break; case PROP_ALLOW_ASYNC: gtk_print_operation_set_allow_async (op, g_value_get_boolean (value)); break; case PROP_SHOW_PROGRESS: gtk_print_operation_set_show_progress (op, g_value_get_boolean (value)); break; case PROP_EXPORT_FILENAME: gtk_print_operation_set_export_filename (op, g_value_get_string (value)); break; case PROP_CUSTOM_TAB_LABEL: gtk_print_operation_set_custom_tab_label (op, g_value_get_string (value)); break; case PROP_EMBED_PAGE_SETUP: gtk_print_operation_set_embed_page_setup (op, g_value_get_boolean (value)); break; case PROP_HAS_SELECTION: gtk_print_operation_set_has_selection (op, g_value_get_boolean (value)); break; case PROP_SUPPORT_SELECTION: gtk_print_operation_set_support_selection (op, g_value_get_boolean (value)); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); break; } } static void gtk_print_operation_get_property (GObject *object, guint prop_id, GValue *value, GParamSpec *pspec) { GtkPrintOperation *op = GTK_PRINT_OPERATION (object); GtkPrintOperationPrivate *priv = op->priv; switch (prop_id) { case PROP_DEFAULT_PAGE_SETUP: g_value_set_object (value, priv->default_page_setup); break; case PROP_PRINT_SETTINGS: g_value_set_object (value, priv->print_settings); break; case PROP_JOB_NAME: g_value_set_string (value, priv->job_name); break; case PROP_N_PAGES: g_value_set_int (value, priv->nr_of_pages); break; case PROP_CURRENT_PAGE: g_value_set_int (value, priv->current_page); break; case PROP_USE_FULL_PAGE: g_value_set_boolean (value, priv->use_full_page); break; case PROP_TRACK_PRINT_STATUS: g_value_set_boolean (value, priv->track_print_status); break; case PROP_UNIT: g_value_set_enum (value, priv->unit); break; case PROP_ALLOW_ASYNC: g_value_set_boolean (value, priv->allow_async); break; case PROP_SHOW_PROGRESS: g_value_set_boolean (value, priv->show_progress); break; case PROP_EXPORT_FILENAME: g_value_set_string (value, priv->export_filename); break; case PROP_STATUS: g_value_set_enum (value, priv->status); break; case PROP_STATUS_STRING: g_value_set_string (value, priv->status_string); break; case PROP_CUSTOM_TAB_LABEL: g_value_set_string (value, priv->custom_tab_label); break; case PROP_EMBED_PAGE_SETUP: g_value_set_boolean (value, priv->embed_page_setup); break; case PROP_HAS_SELECTION: g_value_set_boolean (value, priv->has_selection); break; case PROP_SUPPORT_SELECTION: g_value_set_boolean (value, priv->support_selection); break; case PROP_N_PAGES_TO_PRINT: g_value_set_int (value, priv->nr_of_pages_to_print); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); break; } } struct _PrintPagesData { GtkPrintOperation *op; gint uncollated_copies; gint collated_copies; gint uncollated, collated, total; gint range, num_ranges; GtkPageRange *ranges; GtkPageRange one_range; gint page; gint sheet; gint first_position, last_position; gint first_sheet; gint num_of_sheets; gint *pages; GtkWidget *progress; gboolean initialized; gboolean is_preview; gboolean done; }; typedef struct { GtkPrintOperationPreview *preview; GtkPrintContext *print_context; GtkWindow *parent; cairo_surface_t *surface; gchar *filename; gboolean wait; PrintPagesData *pages_data; } PreviewOp; static void preview_print_idle_done (gpointer data) { GtkPrintOperation *op; PreviewOp *pop = (PreviewOp *) data; op = GTK_PRINT_OPERATION (pop->preview); cairo_surface_finish (pop->surface); /* Surface is destroyed in launch_preview */ _gtk_print_operation_platform_backend_launch_preview (op, pop->surface, pop->parent, pop->filename); g_free (pop->filename); gtk_print_operation_preview_end_preview (pop->preview); g_object_unref (pop->pages_data->op); g_free (pop->pages_data->pages); g_free (pop->pages_data); g_object_unref (op); g_free (pop); } static gboolean preview_print_idle (gpointer data) { PreviewOp *pop; GtkPrintOperation *op; GtkPrintOperationPrivate *priv; gboolean done = FALSE; pop = (PreviewOp *) data; op = GTK_PRINT_OPERATION (pop->preview); priv = op->priv; if (priv->page_drawing_state == GTK_PAGE_DRAWING_STATE_READY) { if (!pop->pages_data->initialized) { pop->pages_data->initialized = TRUE; prepare_data (pop->pages_data); } else { increment_page_sequence (pop->pages_data); if (!pop->pages_data->done) gtk_print_operation_preview_render_page (pop->preview, pop->pages_data->page); else done = priv->page_drawing_state == GTK_PAGE_DRAWING_STATE_READY; } } return !done; } static void preview_got_page_size (GtkPrintOperationPreview *preview, GtkPrintContext *context, GtkPageSetup *page_setup, PreviewOp *pop) { GtkPrintOperation *op = GTK_PRINT_OPERATION (preview); cairo_t *cr; _gtk_print_operation_platform_backend_resize_preview_surface (op, page_setup, pop->surface); cr = gtk_print_context_get_cairo_context (pop->print_context); _gtk_print_operation_platform_backend_preview_start_page (op, pop->surface, cr); } static void preview_ready (GtkPrintOperationPreview *preview, GtkPrintContext *context, PreviewOp *pop) { pop->print_context = context; g_object_ref (preview); gdk_threads_add_idle_full (G_PRIORITY_DEFAULT_IDLE + 10, preview_print_idle, pop, preview_print_idle_done); } static gboolean gtk_print_operation_preview_handler (GtkPrintOperation *op, GtkPrintOperationPreview *preview, GtkPrintContext *context, GtkWindow *parent) { gdouble dpi_x, dpi_y; PreviewOp *pop; GtkPageSetup *page_setup; cairo_t *cr; pop = g_new0 (PreviewOp, 1); pop->filename = NULL; pop->preview = preview; pop->parent = parent; pop->pages_data = g_new0 (PrintPagesData, 1); pop->pages_data->op = g_object_ref (GTK_PRINT_OPERATION (preview)); pop->pages_data->is_preview = TRUE; page_setup = gtk_print_context_get_page_setup (context); pop->surface = _gtk_print_operation_platform_backend_create_preview_surface (op, page_setup, &dpi_x, &dpi_y, &pop->filename); if (pop->surface == NULL) { g_free (pop); return FALSE; } cr = cairo_create (pop->surface); gtk_print_context_set_cairo_context (op->priv->print_context, cr, dpi_x, dpi_y); cairo_destroy (cr); g_signal_connect (preview, "ready", (GCallback) preview_ready, pop); g_signal_connect (preview, "got-page-size", (GCallback) preview_got_page_size, pop); return TRUE; } static GtkWidget * gtk_print_operation_create_custom_widget (GtkPrintOperation *operation) { return NULL; } static gboolean gtk_print_operation_paginate (GtkPrintOperation *operation, GtkPrintContext *context) { /* assume the number of pages is already set and pagination is not needed */ return TRUE; } static void gtk_print_operation_done (GtkPrintOperation *operation, GtkPrintOperationResult result) { GtkPrintOperationPrivate *priv = operation->priv; if (priv->print_context) { g_object_unref (priv->print_context); priv->print_context = NULL; } } static gboolean custom_widget_accumulator (GSignalInvocationHint *ihint, GValue *return_accu, const GValue *handler_return, gpointer dummy) { gboolean continue_emission; GtkWidget *widget; widget = g_value_get_object (handler_return); if (widget != NULL) g_value_set_object (return_accu, widget); continue_emission = (widget == NULL); return continue_emission; } static gboolean paginate_accumulator (GSignalInvocationHint *ihint, GValue *return_accu, const GValue *handler_return, gpointer dummy) { *return_accu = *handler_return; /* Stop signal emission on first invocation, so if it's a callback then * the default handler won't run. */ return FALSE; } static void gtk_print_operation_class_init (GtkPrintOperationClass *class) { GObjectClass *gobject_class = (GObjectClass *)class; gobject_class->set_property = gtk_print_operation_set_property; gobject_class->get_property = gtk_print_operation_get_property; gobject_class->finalize = gtk_print_operation_finalize; class->preview = gtk_print_operation_preview_handler; class->create_custom_widget = gtk_print_operation_create_custom_widget; class->paginate = gtk_print_operation_paginate; class->done = gtk_print_operation_done; g_type_class_add_private (gobject_class, sizeof (GtkPrintOperationPrivate)); /** * GtkPrintOperation::done: * @operation: the #GtkPrintOperation on which the signal was emitted * @result: the result of the print operation * * Emitted when the print operation run has finished doing * everything required for printing. * * @result gives you information about what happened during the run. * If @result is %GTK_PRINT_OPERATION_RESULT_ERROR then you can call * gtk_print_operation_get_error() for more information. * * If you enabled print status tracking then * gtk_print_operation_is_finished() may still return %FALSE * after #GtkPrintOperation::done was emitted. * * Since: 2.10 */ signals[DONE] = g_signal_new (I_("done"), G_TYPE_FROM_CLASS (gobject_class), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GtkPrintOperationClass, done), NULL, NULL, g_cclosure_marshal_VOID__ENUM, G_TYPE_NONE, 1, GTK_TYPE_PRINT_OPERATION_RESULT); /** * GtkPrintOperation::begin-print: * @operation: the #GtkPrintOperation on which the signal was emitted * @context: the #GtkPrintContext for the current operation * * Emitted after the user has finished changing print settings * in the dialog, before the actual rendering starts. * * A typical use for ::begin-print is to use the parameters from the * #GtkPrintContext and paginate the document accordingly, and then * set the number of pages with gtk_print_operation_set_n_pages(). * * Since: 2.10 */ signals[BEGIN_PRINT] = g_signal_new (I_("begin-print"), G_TYPE_FROM_CLASS (gobject_class), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GtkPrintOperationClass, begin_print), NULL, NULL, g_cclosure_marshal_VOID__OBJECT, G_TYPE_NONE, 1, GTK_TYPE_PRINT_CONTEXT); /** * GtkPrintOperation::paginate: * @operation: the #GtkPrintOperation on which the signal was emitted * @context: the #GtkPrintContext for the current operation * * Emitted after the #GtkPrintOperation::begin-print signal, but before * the actual rendering starts. It keeps getting emitted until a connected * signal handler returns %TRUE. * * The ::paginate signal is intended to be used for paginating a document * in small chunks, to avoid blocking the user interface for a long * time. The signal handler should update the number of pages using * gtk_print_operation_set_n_pages(), and return %TRUE if the document * has been completely paginated. * * If you don't need to do pagination in chunks, you can simply do * it all in the ::begin-print handler, and set the number of pages * from there. * * Return value: %TRUE if pagination is complete * * Since: 2.10 */ signals[PAGINATE] = g_signal_new (I_("paginate"), G_TYPE_FROM_CLASS (gobject_class), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GtkPrintOperationClass, paginate), paginate_accumulator, NULL, _gtk_marshal_BOOLEAN__OBJECT, G_TYPE_BOOLEAN, 1, GTK_TYPE_PRINT_CONTEXT); /** * GtkPrintOperation::request-page-setup: * @operation: the #GtkPrintOperation on which the signal was emitted * @context: the #GtkPrintContext for the current operation * @page_nr: the number of the currently printed page (0-based) * @setup: the #GtkPageSetup * * Emitted once for every page that is printed, to give * the application a chance to modify the page setup. Any changes * done to @setup will be in force only for printing this page. * * Since: 2.10 */ signals[REQUEST_PAGE_SETUP] = g_signal_new (I_("request-page-setup"), G_TYPE_FROM_CLASS (gobject_class), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GtkPrintOperationClass, request_page_setup), NULL, NULL, _gtk_marshal_VOID__OBJECT_INT_OBJECT, G_TYPE_NONE, 3, GTK_TYPE_PRINT_CONTEXT, G_TYPE_INT, GTK_TYPE_PAGE_SETUP); /** * GtkPrintOperation::draw-page: * @operation: the #GtkPrintOperation on which the signal was emitted * @context: the #GtkPrintContext for the current operation * @page_nr: the number of the currently printed page (0-based) * * Emitted for every page that is printed. The signal handler * must render the @page_nr's page onto the cairo context obtained * from @context using gtk_print_context_get_cairo_context(). * |[ * static void * draw_page (GtkPrintOperation *operation, * GtkPrintContext *context, * gint page_nr, * gpointer user_data) * { * cairo_t *cr; * PangoLayout *layout; * gdouble width, text_height; * gint layout_height; * PangoFontDescription *desc; * * cr = gtk_print_context_get_cairo_context (context); * width = gtk_print_context_get_width (context); * * cairo_rectangle (cr, 0, 0, width, HEADER_HEIGHT); * * cairo_set_source_rgb (cr, 0.8, 0.8, 0.8); * cairo_fill (cr); * * layout = gtk_print_context_create_pango_layout (context); * * desc = pango_font_description_from_string ("sans 14"); * pango_layout_set_font_description (layout, desc); * pango_font_description_free (desc); * * pango_layout_set_text (layout, "some text", -1); * pango_layout_set_width (layout, width * PANGO_SCALE); * pango_layout_set_alignment (layout, PANGO_ALIGN_CENTER); * * pango_layout_get_size (layout, NULL, &layout_height); * text_height = (gdouble)layout_height / PANGO_SCALE; * * cairo_move_to (cr, width / 2, (HEADER_HEIGHT - text_height) / 2); * pango_cairo_show_layout (cr, layout); * * g_object_unref (layout); * } * ]| * * Use gtk_print_operation_set_use_full_page() and * gtk_print_operation_set_unit() before starting the print operation * to set up the transformation of the cairo context according to your * needs. * * Since: 2.10 */ signals[DRAW_PAGE] = g_signal_new (I_("draw-page"), G_TYPE_FROM_CLASS (gobject_class), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GtkPrintOperationClass, draw_page), NULL, NULL, _gtk_marshal_VOID__OBJECT_INT, G_TYPE_NONE, 2, GTK_TYPE_PRINT_CONTEXT, G_TYPE_INT); /** * GtkPrintOperation::end-print: * @operation: the #GtkPrintOperation on which the signal was emitted * @context: the #GtkPrintContext for the current operation * * Emitted after all pages have been rendered. * A handler for this signal can clean up any resources that have * been allocated in the #GtkPrintOperation::begin-print handler. * * Since: 2.10 */ signals[END_PRINT] = g_signal_new (I_("end-print"), G_TYPE_FROM_CLASS (gobject_class), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GtkPrintOperationClass, end_print), NULL, NULL, g_cclosure_marshal_VOID__OBJECT, G_TYPE_NONE, 1, GTK_TYPE_PRINT_CONTEXT); /** * GtkPrintOperation::status-changed: * @operation: the #GtkPrintOperation on which the signal was emitted * * Emitted at between the various phases of the print operation. * See #GtkPrintStatus for the phases that are being discriminated. * Use gtk_print_operation_get_status() to find out the current * status. * * Since: 2.10 */ signals[STATUS_CHANGED] = g_signal_new (I_("status-changed"), G_TYPE_FROM_CLASS (class), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GtkPrintOperationClass, status_changed), NULL, NULL, g_cclosure_marshal_VOID__VOID, G_TYPE_NONE, 0); /** * GtkPrintOperation::create-custom-widget: * @operation: the #GtkPrintOperation on which the signal was emitted * * Emitted when displaying the print dialog. If you return a * widget in a handler for this signal it will be added to a custom * tab in the print dialog. You typically return a container widget * with multiple widgets in it. * * The print dialog owns the returned widget, and its lifetime is not * controlled by the application. However, the widget is guaranteed * to stay around until the #GtkPrintOperation::custom-widget-apply * signal is emitted on the operation. Then you can read out any * information you need from the widgets. * * Returns: (transfer none): A custom widget that gets embedded in * the print dialog, or %NULL * * Since: 2.10 */ signals[CREATE_CUSTOM_WIDGET] = g_signal_new (I_("create-custom-widget"), G_TYPE_FROM_CLASS (class), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GtkPrintOperationClass, create_custom_widget), custom_widget_accumulator, NULL, _gtk_marshal_OBJECT__VOID, G_TYPE_OBJECT, 0); /** * GtkPrintOperation::update-custom-widget: * @operation: the #GtkPrintOperation on which the signal was emitted * @widget: the custom widget added in create-custom-widget * @setup: actual page setup * @settings: actual print settings * * Emitted after change of selected printer. The actual page setup and * print settings are passed to the custom widget, which can actualize * itself according to this change. * * Since: 2.18 */ signals[UPDATE_CUSTOM_WIDGET] = g_signal_new (I_("update-custom-widget"), G_TYPE_FROM_CLASS (class), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GtkPrintOperationClass, update_custom_widget), NULL, NULL, _gtk_marshal_VOID__OBJECT_OBJECT_OBJECT, G_TYPE_NONE, 3, GTK_TYPE_WIDGET, GTK_TYPE_PAGE_SETUP, GTK_TYPE_PRINT_SETTINGS); /** * GtkPrintOperation::custom-widget-apply: * @operation: the #GtkPrintOperation on which the signal was emitted * @widget: the custom widget added in create-custom-widget * * Emitted right before #GtkPrintOperation::begin-print if you added * a custom widget in the #GtkPrintOperation::create-custom-widget handler. * When you get this signal you should read the information from the * custom widgets, as the widgets are not guaraneed to be around at a * later time. * * Since: 2.10 */ signals[CUSTOM_WIDGET_APPLY] = g_signal_new (I_("custom-widget-apply"), G_TYPE_FROM_CLASS (class), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GtkPrintOperationClass, custom_widget_apply), NULL, NULL, g_cclosure_marshal_VOID__OBJECT, G_TYPE_NONE, 1, GTK_TYPE_WIDGET); /** * GtkPrintOperation::preview: * @operation: the #GtkPrintOperation on which the signal was emitted * @preview: the #GtkPrintPreviewOperation for the current operation * @context: the #GtkPrintContext that will be used * @parent: (allow-none): the #GtkWindow to use as window parent, or %NULL * * Gets emitted when a preview is requested from the native dialog. * * The default handler for this signal uses an external viewer * application to preview. * * To implement a custom print preview, an application must return * %TRUE from its handler for this signal. In order to use the * provided @context for the preview implementation, it must be * given a suitable cairo context with gtk_print_context_set_cairo_context(). * * The custom preview implementation can use * gtk_print_operation_preview_is_selected() and * gtk_print_operation_preview_render_page() to find pages which * are selected for print and render them. The preview must be * finished by calling gtk_print_operation_preview_end_preview() * (typically in response to the user clicking a close button). * * Returns: %TRUE if the listener wants to take over control of the preview * * Since: 2.10 */ signals[PREVIEW] = g_signal_new (I_("preview"), G_TYPE_FROM_CLASS (gobject_class), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GtkPrintOperationClass, preview), _gtk_boolean_handled_accumulator, NULL, _gtk_marshal_BOOLEAN__OBJECT_OBJECT_OBJECT, G_TYPE_BOOLEAN, 3, GTK_TYPE_PRINT_OPERATION_PREVIEW, GTK_TYPE_PRINT_CONTEXT, GTK_TYPE_WINDOW); /** * GtkPrintOperation:default-page-setup: * * The #GtkPageSetup used by default. * * This page setup will be used by gtk_print_operation_run(), * but it can be overridden on a per-page basis by connecting * to the #GtkPrintOperation::request-page-setup signal. * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_DEFAULT_PAGE_SETUP, g_param_spec_object ("default-page-setup", P_("Default Page Setup"), P_("The GtkPageSetup used by default"), GTK_TYPE_PAGE_SETUP, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:print-settings: * * The #GtkPrintSettings used for initializing the dialog. * * Setting this property is typically used to re-establish * print settings from a previous print operation, see * gtk_print_operation_run(). * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_PRINT_SETTINGS, g_param_spec_object ("print-settings", P_("Print Settings"), P_("The GtkPrintSettings used for initializing the dialog"), GTK_TYPE_PRINT_SETTINGS, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:job-name: * * A string used to identify the job (e.g. in monitoring * applications like eggcups). * * If you don't set a job name, GTK+ picks a default one * by numbering successive print jobs. * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_JOB_NAME, g_param_spec_string ("job-name", P_("Job Name"), P_("A string used for identifying the print job."), "", GTK_PARAM_READWRITE)); /** * GtkPrintOperation:n-pages: * * The number of pages in the document. * * This must be set to a positive number * before the rendering starts. It may be set in a * #GtkPrintOperation::begin-print signal hander. * * Note that the page numbers passed to the * #GtkPrintOperation::request-page-setup and * #GtkPrintOperation::draw-page signals are 0-based, i.e. if * the user chooses to print all pages, the last ::draw-page signal * will be for page @n_pages - 1. * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_N_PAGES, g_param_spec_int ("n-pages", P_("Number of Pages"), P_("The number of pages in the document."), -1, G_MAXINT, -1, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:current-page: * * The current page in the document. * * If this is set before gtk_print_operation_run(), * the user will be able to select to print only the current page. * * Note that this only makes sense for pre-paginated documents. * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_CURRENT_PAGE, g_param_spec_int ("current-page", P_("Current Page"), P_("The current page in the document"), -1, G_MAXINT, -1, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:use-full-page: * * If %TRUE, the transformation for the cairo context obtained * from #GtkPrintContext puts the origin at the top left corner * of the page (which may not be the top left corner of the sheet, * depending on page orientation and the number of pages per sheet). * Otherwise, the origin is at the top left corner of the imageable * area (i.e. inside the margins). * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_USE_FULL_PAGE, g_param_spec_boolean ("use-full-page", P_("Use full page"), P_("TRUE if the origin of the context should be at the corner of the page and not the corner of the imageable area"), FALSE, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:track-print-status: * * If %TRUE, the print operation will try to continue report on * the status of the print job in the printer queues and printer. * This can allow your application to show things like "out of paper" * issues, and when the print job actually reaches the printer. * However, this is often implemented using polling, and should * not be enabled unless needed. * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_TRACK_PRINT_STATUS, g_param_spec_boolean ("track-print-status", P_("Track Print Status"), P_("TRUE if the print operation will continue to report on the print job status after the print data has been sent to the printer or print server."), FALSE, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:unit: * * The transformation for the cairo context obtained from * #GtkPrintContext is set up in such a way that distances * are measured in units of @unit. * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_UNIT, g_param_spec_enum ("unit", P_("Unit"), P_("The unit in which distances can be measured in the context"), GTK_TYPE_UNIT, GTK_UNIT_PIXEL, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:show-progress: * * Determines whether to show a progress dialog during the * print operation. * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_SHOW_PROGRESS, g_param_spec_boolean ("show-progress", P_("Show Dialog"), P_("TRUE if a progress dialog is shown while printing."), FALSE, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:allow-async: * * Determines whether the print operation may run asynchronously or not. * * Some systems don't support asynchronous printing, but those that do * will return %GTK_PRINT_OPERATION_RESULT_IN_PROGRESS as the status, and * emit the #GtkPrintOperation::done signal when the operation is actually * done. * * The Windows port does not support asynchronous operation at all (this * is unlikely to change). On other platforms, all actions except for * %GTK_PRINT_OPERATION_ACTION_EXPORT support asynchronous operation. * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_ALLOW_ASYNC, g_param_spec_boolean ("allow-async", P_("Allow Async"), P_("TRUE if print process may run asynchronous."), FALSE, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:export-filename: * * The name of a file to generate instead of showing the print dialog. * Currently, PDF is the only supported format. * * The intended use of this property is for implementing * "Export to PDF" actions. * * "Print to PDF" support is independent of this and is done * by letting the user pick the "Print to PDF" item from the * list of printers in the print dialog. * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_EXPORT_FILENAME, g_param_spec_string ("export-filename", P_("Export filename"), P_("Export filename"), NULL, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:status: * * The status of the print operation. * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_STATUS, g_param_spec_enum ("status", P_("Status"), P_("The status of the print operation"), GTK_TYPE_PRINT_STATUS, GTK_PRINT_STATUS_INITIAL, GTK_PARAM_READABLE)); /** * GtkPrintOperation:status-string: * * A string representation of the status of the print operation. * The string is translated and suitable for displaying the print * status e.g. in a #GtkStatusbar. * * See the #GtkPrintOperation:status property for a status value that * is suitable for programmatic use. * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_STATUS_STRING, g_param_spec_string ("status-string", P_("Status String"), P_("A human-readable description of the status"), "", GTK_PARAM_READABLE)); /** * GtkPrintOperation:custom-tab-label: * * Used as the label of the tab containing custom widgets. * Note that this property may be ignored on some platforms. * * If this is %NULL, GTK+ uses a default label. * * Since: 2.10 */ g_object_class_install_property (gobject_class, PROP_CUSTOM_TAB_LABEL, g_param_spec_string ("custom-tab-label", P_("Custom tab label"), P_("Label for the tab containing custom widgets."), NULL, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:support-selection: * * If %TRUE, the print operation will support print of selection. * This allows the print dialog to show a "Selection" button. * * Since: 2.18 */ g_object_class_install_property (gobject_class, PROP_SUPPORT_SELECTION, g_param_spec_boolean ("support-selection", P_("Support Selection"), P_("TRUE if the print operation will support print of selection."), FALSE, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:has-selection: * * Determines whether there is a selection in your application. * This can allow your application to print the selection. * This is typically used to make a "Selection" button sensitive. * * Since: 2.18 */ g_object_class_install_property (gobject_class, PROP_HAS_SELECTION, g_param_spec_boolean ("has-selection", P_("Has Selection"), P_("TRUE if a selection exists."), FALSE, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:embed-page-setup: * * If %TRUE, page size combo box and orientation combo box are embedded into page setup page. * * Since: 2.18 */ g_object_class_install_property (gobject_class, PROP_EMBED_PAGE_SETUP, g_param_spec_boolean ("embed-page-setup", P_("Embed Page Setup"), P_("TRUE if page setup combos are embedded in GtkPrintDialog"), FALSE, GTK_PARAM_READWRITE)); /** * GtkPrintOperation:n-pages-to-print: * * The number of pages that will be printed. * * Note that this value is set during print preparation phase * (%GTK_PRINT_STATUS_PREPARING), so this value should never be * get before the data generation phase (%GTK_PRINT_STATUS_GENERATING_DATA). * You can connect to the #GtkPrintOperation::status-changed signal * and call gtk_print_operation_get_n_pages_to_print() when * print status is %GTK_PRINT_STATUS_GENERATING_DATA. * This is typically used to track the progress of print operation. * * Since: 2.18 */ g_object_class_install_property (gobject_class, PROP_N_PAGES_TO_PRINT, g_param_spec_int ("n-pages-to-print", P_("Number of Pages To Print"), P_("The number of pages that will be printed."), -1, G_MAXINT, -1, GTK_PARAM_READABLE)); } /** * gtk_print_operation_new: * * Creates a new #GtkPrintOperation. * * Returns: a new #GtkPrintOperation * * Since: 2.10 */ GtkPrintOperation * gtk_print_operation_new (void) { GtkPrintOperation *print_operation; print_operation = g_object_new (GTK_TYPE_PRINT_OPERATION, NULL); return print_operation; } /** * gtk_print_operation_set_default_page_setup: * @op: a #GtkPrintOperation * @default_page_setup: (allow-none): a #GtkPageSetup, or %NULL * * Makes @default_page_setup the default page setup for @op. * * This page setup will be used by gtk_print_operation_run(), * but it can be overridden on a per-page basis by connecting * to the #GtkPrintOperation::request-page-setup signal. * * Since: 2.10 **/ void gtk_print_operation_set_default_page_setup (GtkPrintOperation *op, GtkPageSetup *default_page_setup) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); g_return_if_fail (default_page_setup == NULL || GTK_IS_PAGE_SETUP (default_page_setup)); priv = op->priv; if (default_page_setup != priv->default_page_setup) { if (default_page_setup) g_object_ref (default_page_setup); if (priv->default_page_setup) g_object_unref (priv->default_page_setup); priv->default_page_setup = default_page_setup; g_object_notify (G_OBJECT (op), "default-page-setup"); } } /** * gtk_print_operation_get_default_page_setup: * @op: a #GtkPrintOperation * * Returns the default page setup, see * gtk_print_operation_set_default_page_setup(). * * Returns: (transfer none): the default page setup * * Since: 2.10 */ GtkPageSetup * gtk_print_operation_get_default_page_setup (GtkPrintOperation *op) { g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), NULL); return op->priv->default_page_setup; } /** * gtk_print_operation_set_print_settings: * @op: a #GtkPrintOperation * @print_settings: (allow-none): #GtkPrintSettings * * Sets the print settings for @op. This is typically used to * re-establish print settings from a previous print operation, * see gtk_print_operation_run(). * * Since: 2.10 **/ void gtk_print_operation_set_print_settings (GtkPrintOperation *op, GtkPrintSettings *print_settings) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); g_return_if_fail (print_settings == NULL || GTK_IS_PRINT_SETTINGS (print_settings)); priv = op->priv; if (print_settings != priv->print_settings) { if (print_settings) g_object_ref (print_settings); if (priv->print_settings) g_object_unref (priv->print_settings); priv->print_settings = print_settings; g_object_notify (G_OBJECT (op), "print-settings"); } } /** * gtk_print_operation_get_print_settings: * @op: a #GtkPrintOperation * * Returns the current print settings. * * Note that the return value is %NULL until either * gtk_print_operation_set_print_settings() or * gtk_print_operation_run() have been called. * * Return value: (transfer none): the current print settings of @op. * * Since: 2.10 **/ GtkPrintSettings * gtk_print_operation_get_print_settings (GtkPrintOperation *op) { g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), NULL); return op->priv->print_settings; } /** * gtk_print_operation_set_job_name: * @op: a #GtkPrintOperation * @job_name: a string that identifies the print job * * Sets the name of the print job. The name is used to identify * the job (e.g. in monitoring applications like eggcups). * * If you don't set a job name, GTK+ picks a default one by * numbering successive print jobs. * * Since: 2.10 **/ void gtk_print_operation_set_job_name (GtkPrintOperation *op, const gchar *job_name) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); g_return_if_fail (job_name != NULL); priv = op->priv; g_free (priv->job_name); priv->job_name = g_strdup (job_name); g_object_notify (G_OBJECT (op), "job-name"); } /** * gtk_print_operation_set_n_pages: * @op: a #GtkPrintOperation * @n_pages: the number of pages * * Sets the number of pages in the document. * * This must be set to a positive number * before the rendering starts. It may be set in a * #GtkPrintOperation::begin-print signal hander. * * Note that the page numbers passed to the * #GtkPrintOperation::request-page-setup * and #GtkPrintOperation::draw-page signals are 0-based, i.e. if * the user chooses to print all pages, the last ::draw-page signal * will be for page @n_pages - 1. * * Since: 2.10 **/ void gtk_print_operation_set_n_pages (GtkPrintOperation *op, gint n_pages) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); g_return_if_fail (n_pages > 0); priv = op->priv; g_return_if_fail (priv->current_page == -1 || priv->current_page < n_pages); if (priv->nr_of_pages != n_pages) { priv->nr_of_pages = n_pages; g_object_notify (G_OBJECT (op), "n-pages"); } } /** * gtk_print_operation_set_current_page: * @op: a #GtkPrintOperation * @current_page: the current page, 0-based * * Sets the current page. * * If this is called before gtk_print_operation_run(), * the user will be able to select to print only the current page. * * Note that this only makes sense for pre-paginated documents. * * Since: 2.10 **/ void gtk_print_operation_set_current_page (GtkPrintOperation *op, gint current_page) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); g_return_if_fail (current_page >= 0); priv = op->priv; g_return_if_fail (priv->nr_of_pages == -1 || current_page < priv->nr_of_pages); if (priv->current_page != current_page) { priv->current_page = current_page; g_object_notify (G_OBJECT (op), "current-page"); } } /** * gtk_print_operation_set_use_full_page: * @op: a #GtkPrintOperation * @full_page: %TRUE to set up the #GtkPrintContext for the full page * * If @full_page is %TRUE, the transformation for the cairo context * obtained from #GtkPrintContext puts the origin at the top left * corner of the page (which may not be the top left corner of the * sheet, depending on page orientation and the number of pages per * sheet). Otherwise, the origin is at the top left corner of the * imageable area (i.e. inside the margins). * * Since: 2.10 */ void gtk_print_operation_set_use_full_page (GtkPrintOperation *op, gboolean full_page) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); full_page = full_page != FALSE; priv = op->priv; if (priv->use_full_page != full_page) { priv->use_full_page = full_page; g_object_notify (G_OBJECT (op), "use-full-page"); } } /** * gtk_print_operation_set_unit: * @op: a #GtkPrintOperation * @unit: the unit to use * * Sets up the transformation for the cairo context obtained from * #GtkPrintContext in such a way that distances are measured in * units of @unit. * * Since: 2.10 */ void gtk_print_operation_set_unit (GtkPrintOperation *op, GtkUnit unit) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); priv = op->priv; if (priv->unit != unit) { priv->unit = unit; g_object_notify (G_OBJECT (op), "unit"); } } /** * gtk_print_operation_set_track_print_status: * @op: a #GtkPrintOperation * @track_status: %TRUE to track status after printing * * If track_status is %TRUE, the print operation will try to continue report * on the status of the print job in the printer queues and printer. This * can allow your application to show things like "out of paper" issues, * and when the print job actually reaches the printer. * * This function is often implemented using some form of polling, so it should * not be enabled unless needed. * * Since: 2.10 */ void gtk_print_operation_set_track_print_status (GtkPrintOperation *op, gboolean track_status) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); priv = op->priv; if (priv->track_print_status != track_status) { priv->track_print_status = track_status; g_object_notify (G_OBJECT (op), "track-print-status"); } } void _gtk_print_operation_set_status (GtkPrintOperation *op, GtkPrintStatus status, const gchar *string) { GtkPrintOperationPrivate *priv = op->priv; static const gchar *status_strs[] = { NC_("print operation status", "Initial state"), NC_("print operation status", "Preparing to print"), NC_("print operation status", "Generating data"), NC_("print operation status", "Sending data"), NC_("print operation status", "Waiting"), NC_("print operation status", "Blocking on issue"), NC_("print operation status", "Printing"), NC_("print operation status", "Finished"), NC_("print operation status", "Finished with error") }; if (status < 0 || status > GTK_PRINT_STATUS_FINISHED_ABORTED) status = GTK_PRINT_STATUS_FINISHED_ABORTED; if (string == NULL) string = g_dpgettext2 (GETTEXT_PACKAGE, "print operation status", status_strs[status]); if (priv->status == status && strcmp (string, priv->status_string) == 0) return; g_free (priv->status_string); priv->status_string = g_strdup (string); priv->status = status; g_object_notify (G_OBJECT (op), "status"); g_object_notify (G_OBJECT (op), "status-string"); g_signal_emit (op, signals[STATUS_CHANGED], 0); } /** * gtk_print_operation_get_status: * @op: a #GtkPrintOperation * * Returns the status of the print operation. * Also see gtk_print_operation_get_status_string(). * * Return value: the status of the print operation * * Since: 2.10 **/ GtkPrintStatus gtk_print_operation_get_status (GtkPrintOperation *op) { g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), GTK_PRINT_STATUS_FINISHED_ABORTED); return op->priv->status; } /** * gtk_print_operation_get_status_string: * @op: a #GtkPrintOperation * * Returns a string representation of the status of the * print operation. The string is translated and suitable * for displaying the print status e.g. in a #GtkStatusbar. * * Use gtk_print_operation_get_status() to obtain a status * value that is suitable for programmatic use. * * Return value: a string representation of the status * of the print operation * * Since: 2.10 **/ const gchar * gtk_print_operation_get_status_string (GtkPrintOperation *op) { g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), ""); return op->priv->status_string; } /** * gtk_print_operation_is_finished: * @op: a #GtkPrintOperation * * A convenience function to find out if the print operation * is finished, either successfully (%GTK_PRINT_STATUS_FINISHED) * or unsuccessfully (%GTK_PRINT_STATUS_FINISHED_ABORTED). * * Note: when you enable print status tracking the print operation * can be in a non-finished state even after done has been called, as * the operation status then tracks the print job status on the printer. * * Return value: %TRUE, if the print operation is finished. * * Since: 2.10 **/ gboolean gtk_print_operation_is_finished (GtkPrintOperation *op) { GtkPrintOperationPrivate *priv; g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), TRUE); priv = op->priv; return priv->status == GTK_PRINT_STATUS_FINISHED_ABORTED || priv->status == GTK_PRINT_STATUS_FINISHED; } /** * gtk_print_operation_set_show_progress: * @op: a #GtkPrintOperation * @show_progress: %TRUE to show a progress dialog * * If @show_progress is %TRUE, the print operation will show a * progress dialog during the print operation. * * Since: 2.10 */ void gtk_print_operation_set_show_progress (GtkPrintOperation *op, gboolean show_progress) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); priv = op->priv; show_progress = show_progress != FALSE; if (priv->show_progress != show_progress) { priv->show_progress = show_progress; g_object_notify (G_OBJECT (op), "show-progress"); } } /** * gtk_print_operation_set_allow_async: * @op: a #GtkPrintOperation * @allow_async: %TRUE to allow asynchronous operation * * Sets whether the gtk_print_operation_run() may return * before the print operation is completed. Note that * some platforms may not allow asynchronous operation. * * Since: 2.10 */ void gtk_print_operation_set_allow_async (GtkPrintOperation *op, gboolean allow_async) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); priv = op->priv; allow_async = allow_async != FALSE; if (priv->allow_async != allow_async) { priv->allow_async = allow_async; g_object_notify (G_OBJECT (op), "allow-async"); } } /** * gtk_print_operation_set_custom_tab_label: * @op: a #GtkPrintOperation * @label: (allow-none): the label to use, or %NULL to use the default label * * Sets the label for the tab holding custom widgets. * * Since: 2.10 */ void gtk_print_operation_set_custom_tab_label (GtkPrintOperation *op, const gchar *label) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); priv = op->priv; g_free (priv->custom_tab_label); priv->custom_tab_label = g_strdup (label); g_object_notify (G_OBJECT (op), "custom-tab-label"); } /** * gtk_print_operation_set_export_filename: * @op: a #GtkPrintOperation * @filename: the filename for the exported file * * Sets up the #GtkPrintOperation to generate a file instead * of showing the print dialog. The indended use of this function * is for implementing "Export to PDF" actions. Currently, PDF * is the only supported format. * * "Print to PDF" support is independent of this and is done * by letting the user pick the "Print to PDF" item from the list * of printers in the print dialog. * * Since: 2.10 */ void gtk_print_operation_set_export_filename (GtkPrintOperation *op, const gchar *filename) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); priv = op->priv; g_free (priv->export_filename); priv->export_filename = g_strdup (filename); g_object_notify (G_OBJECT (op), "export-filename"); } /* Creates the initial page setup used for printing unless the * app overrides this on a per-page basis using request_page_setup. * * Data is taken from, in order, if existing: * * PrintSettings returned from the print dialog * (initial dialog values are set from default_page_setup * if unset in app specified print_settings) * default_page_setup * per-locale default setup */ static GtkPageSetup * create_page_setup (GtkPrintOperation *op) { GtkPrintOperationPrivate *priv = op->priv; GtkPageSetup *page_setup; GtkPrintSettings *settings; if (priv->default_page_setup) page_setup = gtk_page_setup_copy (priv->default_page_setup); else page_setup = gtk_page_setup_new (); settings = priv->print_settings; if (settings) { GtkPaperSize *paper_size; if (gtk_print_settings_has_key (settings, GTK_PRINT_SETTINGS_ORIENTATION)) gtk_page_setup_set_orientation (page_setup, gtk_print_settings_get_orientation (settings)); paper_size = gtk_print_settings_get_paper_size (settings); if (paper_size) { gtk_page_setup_set_paper_size (page_setup, paper_size); gtk_paper_size_free (paper_size); } /* TODO: Margins? */ } return page_setup; } static void pdf_start_page (GtkPrintOperation *op, GtkPrintContext *print_context, GtkPageSetup *page_setup) { GtkPaperSize *paper_size; cairo_surface_t *surface = op->priv->platform_data; gdouble w, h; paper_size = gtk_page_setup_get_paper_size (page_setup); w = gtk_paper_size_get_width (paper_size, GTK_UNIT_POINTS); h = gtk_paper_size_get_height (paper_size, GTK_UNIT_POINTS); cairo_pdf_surface_set_size (surface, w, h); } static void pdf_end_page (GtkPrintOperation *op, GtkPrintContext *print_context) { cairo_t *cr; cr = gtk_print_context_get_cairo_context (print_context); if ((op->priv->manual_number_up < 2) || ((op->priv->page_position + 1) % op->priv->manual_number_up == 0) || (op->priv->page_position == op->priv->nr_of_pages_to_print - 1)) cairo_show_page (cr); } static void pdf_end_run (GtkPrintOperation *op, gboolean wait, gboolean cancelled) { GtkPrintOperationPrivate *priv = op->priv; cairo_surface_t *surface = priv->platform_data; cairo_surface_finish (surface); cairo_surface_destroy (surface); priv->platform_data = NULL; priv->free_platform_data = NULL; } static GtkPrintOperationResult run_pdf (GtkPrintOperation *op, GtkWindow *parent, gboolean *do_print) { GtkPrintOperationPrivate *priv = op->priv; GtkPageSetup *page_setup; cairo_surface_t *surface; cairo_t *cr; gdouble width, height; priv->print_context = _gtk_print_context_new (op); page_setup = create_page_setup (op); _gtk_print_context_set_page_setup (priv->print_context, page_setup); /* This will be overwritten later by the non-default size, but we need to pass some size: */ width = gtk_page_setup_get_paper_width (page_setup, GTK_UNIT_POINTS); height = gtk_page_setup_get_paper_height (page_setup, GTK_UNIT_POINTS); g_object_unref (page_setup); surface = cairo_pdf_surface_create (priv->export_filename, width, height); if (cairo_surface_status (surface) != CAIRO_STATUS_SUCCESS) { g_set_error_literal (&priv->error, GTK_PRINT_ERROR, GTK_PRINT_ERROR_GENERAL, cairo_status_to_string (cairo_surface_status (surface))); *do_print = FALSE; return GTK_PRINT_OPERATION_RESULT_ERROR; } /* this would crash on a nil surface */ cairo_surface_set_fallback_resolution (surface, 300, 300); priv->platform_data = surface; priv->free_platform_data = (GDestroyNotify) cairo_surface_destroy; cr = cairo_create (surface); gtk_print_context_set_cairo_context (op->priv->print_context, cr, 72, 72); cairo_destroy (cr); priv->print_pages = GTK_PRINT_PAGES_ALL; priv->page_ranges = NULL; priv->num_page_ranges = 0; priv->manual_num_copies = 1; priv->manual_collation = FALSE; priv->manual_reverse = FALSE; priv->manual_page_set = GTK_PAGE_SET_ALL; priv->manual_scale = 1.0; priv->manual_orientation = TRUE; priv->manual_number_up = 1; priv->manual_number_up_layout = GTK_NUMBER_UP_LAYOUT_LEFT_TO_RIGHT_TOP_TO_BOTTOM; *do_print = TRUE; priv->start_page = pdf_start_page; priv->end_page = pdf_end_page; priv->end_run = pdf_end_run; return GTK_PRINT_OPERATION_RESULT_APPLY; } static void clamp_page_ranges (PrintPagesData *data) { GtkPrintOperationPrivate *priv; gint num_of_correct_ranges; gint i; priv = data->op->priv; num_of_correct_ranges = 0; for (i = 0; i < data->num_ranges; i++) if ((data->ranges[i].start >= 0) && (data->ranges[i].start < priv->nr_of_pages) && (data->ranges[i].end >= 0) && (data->ranges[i].end < priv->nr_of_pages)) { data->ranges[num_of_correct_ranges] = data->ranges[i]; num_of_correct_ranges++; } else if ((data->ranges[i].start >= 0) && (data->ranges[i].start < priv->nr_of_pages) && (data->ranges[i].end >= priv->nr_of_pages)) { data->ranges[i].end = priv->nr_of_pages - 1; data->ranges[num_of_correct_ranges] = data->ranges[i]; num_of_correct_ranges++; } else if ((data->ranges[i].end >= 0) && (data->ranges[i].end < priv->nr_of_pages) && (data->ranges[i].start < 0)) { data->ranges[i].start = 0; data->ranges[num_of_correct_ranges] = data->ranges[i]; num_of_correct_ranges++; } data->num_ranges = num_of_correct_ranges; } static void increment_page_sequence (PrintPagesData *data) { GtkPrintOperationPrivate *priv = data->op->priv; gint inc; if (data->total == -1) { data->total = 0; return; } /* check whether we reached last position */ if (priv->page_position == data->last_position && !(data->collated_copies > 1 && data->collated < (data->collated_copies - 1))) { if (data->uncollated_copies > 1 && data->uncollated < (data->uncollated_copies - 1)) { priv->page_position = data->first_position; data->sheet = data->first_sheet; data->uncollated++; } else { data->done = TRUE; return; } } else { if (priv->manual_reverse) inc = -1; else inc = 1; /* changing sheet */ if (priv->manual_number_up < 2 || (priv->page_position + 1) % priv->manual_number_up == 0 || priv->page_position == data->last_position || priv->page_position == priv->nr_of_pages_to_print - 1) { /* check whether to print the same sheet again */ if (data->collated_copies > 1) { if (data->collated < (data->collated_copies - 1)) { data->collated++; data->total++; priv->page_position = data->sheet * priv->manual_number_up; if (priv->page_position < 0 || priv->page_position >= priv->nr_of_pages_to_print || data->sheet < 0 || data->sheet >= data->num_of_sheets) { data->done = TRUE; return; } else data->page = data->pages[priv->page_position]; return; } else data->collated = 0; } if (priv->manual_page_set == GTK_PAGE_SET_ODD || priv->manual_page_set == GTK_PAGE_SET_EVEN) data->sheet += 2 * inc; else data->sheet += inc; priv->page_position = data->sheet * priv->manual_number_up; } else priv->page_position += 1; } /* general check */ if (priv->page_position < 0 || priv->page_position >= priv->nr_of_pages_to_print || data->sheet < 0 || data->sheet >= data->num_of_sheets) { data->done = TRUE; return; } else data->page = data->pages[priv->page_position]; data->total++; } static void print_pages_idle_done (gpointer user_data) { PrintPagesData *data; GtkPrintOperationPrivate *priv; data = (PrintPagesData*)user_data; priv = data->op->priv; priv->print_pages_idle_id = 0; if (priv->show_progress_timeout_id > 0) { g_source_remove (priv->show_progress_timeout_id); priv->show_progress_timeout_id = 0; } if (data->progress) gtk_widget_destroy (data->progress); if (priv->rloop && !data->is_preview) g_main_loop_quit (priv->rloop); if (!data->is_preview) g_signal_emit (data->op, signals[DONE], 0, priv->cancelled ? GTK_PRINT_OPERATION_RESULT_CANCEL : GTK_PRINT_OPERATION_RESULT_APPLY); g_object_unref (data->op); g_free (data->pages); g_free (data); } static void update_progress (PrintPagesData *data) { GtkPrintOperationPrivate *priv; gchar *text = NULL; priv = data->op->priv; if (data->progress) { if (priv->status == GTK_PRINT_STATUS_PREPARING) { if (priv->nr_of_pages_to_print > 0) text = g_strdup_printf (_("Preparing %d"), priv->nr_of_pages_to_print); else text = g_strdup (_("Preparing")); } else if (priv->status == GTK_PRINT_STATUS_GENERATING_DATA) text = g_strdup_printf (_("Printing %d"), data->total); if (text) { g_object_set (data->progress, "text", text, NULL); g_free (text); } } } /** * gtk_print_operation_set_defer_drawing: * @op: a #GtkPrintOperation * * Sets up the #GtkPrintOperation to wait for calling of * gtk_print_operation_draw_page_finish() from application. It can * be used for drawing page in another thread. * * This function must be called in the callback of "draw-page" signal. * * Since: 2.16 **/ void gtk_print_operation_set_defer_drawing (GtkPrintOperation *op) { GtkPrintOperationPrivate *priv = op->priv; g_return_if_fail (priv->page_drawing_state == GTK_PAGE_DRAWING_STATE_DRAWING); priv->page_drawing_state = GTK_PAGE_DRAWING_STATE_DEFERRED_DRAWING; } /** * gtk_print_operation_set_embed_page_setup: * @op: a #GtkPrintOperation * @embed: %TRUE to embed page setup selection in the #GtkPrintDialog * * Embed page size combo box and orientation combo box into page setup page. * Selected page setup is stored as default page setup in #GtkPrintOperation. * * Since: 2.18 **/ void gtk_print_operation_set_embed_page_setup (GtkPrintOperation *op, gboolean embed) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); priv = op->priv; embed = embed != FALSE; if (priv->embed_page_setup != embed) { priv->embed_page_setup = embed; g_object_notify (G_OBJECT (op), "embed-page-setup"); } } /** * gtk_print_operation_get_embed_page_setup: * @op: a #GtkPrintOperation * * Gets the value of #GtkPrintOperation::embed-page-setup property. * * Returns: whether page setup selection combos are embedded * * Since: 2.18 */ gboolean gtk_print_operation_get_embed_page_setup (GtkPrintOperation *op) { g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), FALSE); return op->priv->embed_page_setup; } /** * gtk_print_operation_draw_page_finish: * @op: a #GtkPrintOperation * * Signalize that drawing of particular page is complete. * * It is called after completion of page drawing (e.g. drawing in another * thread). * If gtk_print_operation_set_defer_drawing() was called before, then this function * has to be called by application. In another case it is called by the library * itself. * * Since: 2.16 **/ void gtk_print_operation_draw_page_finish (GtkPrintOperation *op) { GtkPrintOperationPrivate *priv = op->priv; GtkPageSetup *page_setup; GtkPrintContext *print_context; cairo_t *cr; print_context = priv->print_context; page_setup = gtk_print_context_get_page_setup (print_context); cr = gtk_print_context_get_cairo_context (print_context); priv->end_page (op, print_context); cairo_restore (cr); g_object_unref (page_setup); priv->page_drawing_state = GTK_PAGE_DRAWING_STATE_READY; } static void common_render_page (GtkPrintOperation *op, gint page_nr) { GtkPrintOperationPrivate *priv = op->priv; GtkPageSetup *page_setup; GtkPrintContext *print_context; cairo_t *cr; print_context = priv->print_context; page_setup = create_page_setup (op); g_signal_emit (op, signals[REQUEST_PAGE_SETUP], 0, print_context, page_nr, page_setup); _gtk_print_context_set_page_setup (print_context, page_setup); priv->start_page (op, print_context, page_setup); cr = gtk_print_context_get_cairo_context (print_context); cairo_save (cr); if (priv->manual_scale != 1.0 && priv->manual_number_up <= 1) cairo_scale (cr, priv->manual_scale, priv->manual_scale); if (priv->manual_orientation) _gtk_print_context_rotate_according_to_orientation (print_context); if (priv->manual_number_up > 1) { GtkPageOrientation orientation; GtkPageSetup *page_setup; gdouble paper_width, paper_height; gdouble page_width, page_height; gdouble context_width, context_height; gdouble bottom_margin, top_margin, left_margin, right_margin; gdouble x_step, y_step; gdouble x_scale, y_scale, scale; gdouble horizontal_offset = 0.0, vertical_offset = 0.0; gint columns, rows, x, y, tmp_length; page_setup = gtk_print_context_get_page_setup (print_context); orientation = gtk_page_setup_get_orientation (page_setup); top_margin = gtk_page_setup_get_top_margin (page_setup, GTK_UNIT_POINTS); bottom_margin = gtk_page_setup_get_bottom_margin (page_setup, GTK_UNIT_POINTS); left_margin = gtk_page_setup_get_left_margin (page_setup, GTK_UNIT_POINTS); right_margin = gtk_page_setup_get_right_margin (page_setup, GTK_UNIT_POINTS); paper_width = gtk_page_setup_get_paper_width (page_setup, GTK_UNIT_POINTS); paper_height = gtk_page_setup_get_paper_height (page_setup, GTK_UNIT_POINTS); context_width = gtk_print_context_get_width (print_context); context_height = gtk_print_context_get_height (print_context); if (orientation == GTK_PAGE_ORIENTATION_PORTRAIT || orientation == GTK_PAGE_ORIENTATION_REVERSE_PORTRAIT) { page_width = paper_width - (left_margin + right_margin); page_height = paper_height - (top_margin + bottom_margin); } else { page_width = paper_width - (top_margin + bottom_margin); page_height = paper_height - (left_margin + right_margin); } if (orientation == GTK_PAGE_ORIENTATION_PORTRAIT || orientation == GTK_PAGE_ORIENTATION_REVERSE_PORTRAIT) cairo_translate (cr, left_margin, top_margin); else cairo_translate (cr, top_margin, left_margin); switch (priv->manual_number_up) { default: columns = 1; rows = 1; break; case 2: columns = 2; rows = 1; break; case 4: columns = 2; rows = 2; break; case 6: columns = 3; rows = 2; break; case 9: columns = 3; rows = 3; break; case 16: columns = 4; rows = 4; break; } if (orientation == GTK_PAGE_ORIENTATION_LANDSCAPE || orientation == GTK_PAGE_ORIENTATION_REVERSE_LANDSCAPE) { tmp_length = columns; columns = rows; rows = tmp_length; } switch (priv->manual_number_up_layout) { case GTK_NUMBER_UP_LAYOUT_LEFT_TO_RIGHT_TOP_TO_BOTTOM: x = priv->page_position % columns; y = (priv->page_position / columns) % rows; break; case GTK_NUMBER_UP_LAYOUT_LEFT_TO_RIGHT_BOTTOM_TO_TOP: x = priv->page_position % columns; y = rows - 1 - (priv->page_position / columns) % rows; break; case GTK_NUMBER_UP_LAYOUT_RIGHT_TO_LEFT_TOP_TO_BOTTOM: x = columns - 1 - priv->page_position % columns; y = (priv->page_position / columns) % rows; break; case GTK_NUMBER_UP_LAYOUT_RIGHT_TO_LEFT_BOTTOM_TO_TOP: x = columns - 1 - priv->page_position % columns; y = rows - 1 - (priv->page_position / columns) % rows; break; case GTK_NUMBER_UP_LAYOUT_TOP_TO_BOTTOM_LEFT_TO_RIGHT: x = (priv->page_position / rows) % columns; y = priv->page_position % rows; break; case GTK_NUMBER_UP_LAYOUT_TOP_TO_BOTTOM_RIGHT_TO_LEFT: x = columns - 1 - (priv->page_position / rows) % columns; y = priv->page_position % rows; break; case GTK_NUMBER_UP_LAYOUT_BOTTOM_TO_TOP_LEFT_TO_RIGHT: x = (priv->page_position / rows) % columns; y = rows - 1 - priv->page_position % rows; break; case GTK_NUMBER_UP_LAYOUT_BOTTOM_TO_TOP_RIGHT_TO_LEFT: x = columns - 1 - (priv->page_position / rows) % columns; y = rows - 1 - priv->page_position % rows; break; default: g_assert_not_reached(); x = 0; y = 0; } if (priv->manual_number_up == 4 || priv->manual_number_up == 9 || priv->manual_number_up == 16) { x_scale = page_width / (columns * paper_width); y_scale = page_height / (rows * paper_height); scale = x_scale < y_scale ? x_scale : y_scale; x_step = paper_width * (x_scale / scale); y_step = paper_height * (y_scale / scale); if ((left_margin + right_margin) > 0) { horizontal_offset = left_margin * (x_step - context_width) / (left_margin + right_margin); vertical_offset = top_margin * (y_step - context_height) / (top_margin + bottom_margin); } else { horizontal_offset = (x_step - context_width) / 2.0; vertical_offset = (y_step - context_height) / 2.0; } cairo_scale (cr, scale, scale); cairo_translate (cr, x * x_step + horizontal_offset, y * y_step + vertical_offset); if (priv->manual_scale != 1.0) cairo_scale (cr, priv->manual_scale, priv->manual_scale); } if (priv->manual_number_up == 2 || priv->manual_number_up == 6) { x_scale = page_height / (columns * paper_width); y_scale = page_width / (rows * paper_height); scale = x_scale < y_scale ? x_scale : y_scale; horizontal_offset = (paper_width * (x_scale / scale) - paper_width) / 2.0 * columns; vertical_offset = (paper_height * (y_scale / scale) - paper_height) / 2.0 * rows; if (!priv->use_full_page) { horizontal_offset -= right_margin; vertical_offset += top_margin; } cairo_scale (cr, scale, scale); cairo_translate (cr, y * paper_height + vertical_offset, (columns - x) * paper_width + horizontal_offset); if (priv->manual_scale != 1.0) cairo_scale (cr, priv->manual_scale, priv->manual_scale); cairo_rotate (cr, - G_PI / 2); } } else if (!priv->use_full_page) _gtk_print_context_translate_into_margin (print_context); priv->page_drawing_state = GTK_PAGE_DRAWING_STATE_DRAWING; g_signal_emit (op, signals[DRAW_PAGE], 0, print_context, page_nr); if (priv->page_drawing_state == GTK_PAGE_DRAWING_STATE_DRAWING) gtk_print_operation_draw_page_finish (op); } static void prepare_data (PrintPagesData *data) { GtkPrintOperationPrivate *priv; GtkPageSetup *page_setup; gboolean paginated = FALSE; gint i, j, counter; priv = data->op->priv; if (priv->manual_collation) { data->uncollated_copies = priv->manual_num_copies; data->collated_copies = 1; } else { data->uncollated_copies = 1; data->collated_copies = priv->manual_num_copies; } if (!data->initialized) { data->initialized = TRUE; page_setup = create_page_setup (data->op); _gtk_print_context_set_page_setup (priv->print_context, page_setup); g_object_unref (page_setup); g_signal_emit (data->op, signals[BEGIN_PRINT], 0, priv->print_context); return; } g_signal_emit (data->op, signals[PAGINATE], 0, priv->print_context, &paginated); if (!paginated) return; /* Initialize parts of PrintPagesData that depend on nr_of_pages */ if (priv->print_pages == GTK_PRINT_PAGES_RANGES) { if (priv->page_ranges == NULL) { g_warning ("no pages to print"); priv->cancelled = TRUE; return; } data->ranges = priv->page_ranges; data->num_ranges = priv->num_page_ranges; for (i = 0; i < data->num_ranges; i++) if (data->ranges[i].end == -1 || data->ranges[i].end >= priv->nr_of_pages) data->ranges[i].end = priv->nr_of_pages - 1; } else if (priv->print_pages == GTK_PRINT_PAGES_CURRENT && priv->current_page != -1) { data->ranges = &data->one_range; data->num_ranges = 1; data->ranges[0].start = priv->current_page; data->ranges[0].end = priv->current_page; } else { data->ranges = &data->one_range; data->num_ranges = 1; data->ranges[0].start = 0; data->ranges[0].end = priv->nr_of_pages - 1; } clamp_page_ranges (data); if (data->num_ranges < 1) { priv->cancelled = TRUE; return; } priv->nr_of_pages_to_print = 0; for (i = 0; i < data->num_ranges; i++) priv->nr_of_pages_to_print += data->ranges[i].end - data->ranges[i].start + 1; data->pages = g_new (gint, priv->nr_of_pages_to_print); counter = 0; for (i = 0; i < data->num_ranges; i++) for (j = data->ranges[i].start; j <= data->ranges[i].end; j++) { data->pages[counter] = j; counter++; } data->total = -1; data->collated = 0; data->uncollated = 0; if (priv->manual_number_up > 1) { if (priv->nr_of_pages_to_print % priv->manual_number_up == 0) data->num_of_sheets = priv->nr_of_pages_to_print / priv->manual_number_up; else data->num_of_sheets = priv->nr_of_pages_to_print / priv->manual_number_up + 1; } else data->num_of_sheets = priv->nr_of_pages_to_print; if (priv->manual_reverse) { /* data->sheet is 0-based */ if (priv->manual_page_set == GTK_PAGE_SET_ODD) data->sheet = (data->num_of_sheets - 1) - (data->num_of_sheets - 1) % 2; else if (priv->manual_page_set == GTK_PAGE_SET_EVEN) data->sheet = (data->num_of_sheets - 1) - (1 - (data->num_of_sheets - 1) % 2); else data->sheet = data->num_of_sheets - 1; } else { /* data->sheet is 0-based */ if (priv->manual_page_set == GTK_PAGE_SET_ODD) data->sheet = 0; else if (priv->manual_page_set == GTK_PAGE_SET_EVEN) { if (data->num_of_sheets > 1) data->sheet = 1; else data->sheet = -1; } else data->sheet = 0; } priv->page_position = data->sheet * priv->manual_number_up; if (priv->page_position < 0 || priv->page_position >= priv->nr_of_pages_to_print) { priv->cancelled = TRUE; return; } data->page = data->pages[priv->page_position]; data->first_position = priv->page_position; data->first_sheet = data->sheet; if (priv->manual_reverse) { if (priv->manual_page_set == GTK_PAGE_SET_ODD) data->last_position = MIN (priv->manual_number_up - 1, priv->nr_of_pages_to_print - 1); else if (priv->manual_page_set == GTK_PAGE_SET_EVEN) data->last_position = MIN (2 * priv->manual_number_up - 1, priv->nr_of_pages_to_print - 1); else data->last_position = MIN (priv->manual_number_up - 1, priv->nr_of_pages_to_print - 1); } else { if (priv->manual_page_set == GTK_PAGE_SET_ODD) data->last_position = MIN (((data->num_of_sheets - 1) - ((data->num_of_sheets - 1) % 2)) * priv->manual_number_up - 1, priv->nr_of_pages_to_print - 1); else if (priv->manual_page_set == GTK_PAGE_SET_EVEN) data->last_position = MIN (((data->num_of_sheets - 1) - (1 - (data->num_of_sheets - 1) % 2)) * priv->manual_number_up - 1, priv->nr_of_pages_to_print - 1); else data->last_position = priv->nr_of_pages_to_print - 1; } _gtk_print_operation_set_status (data->op, GTK_PRINT_STATUS_GENERATING_DATA, NULL); } static gboolean print_pages_idle (gpointer user_data) { PrintPagesData *data; GtkPrintOperationPrivate *priv; gboolean done = FALSE; data = (PrintPagesData*)user_data; priv = data->op->priv; if (priv->page_drawing_state == GTK_PAGE_DRAWING_STATE_READY) { if (priv->status == GTK_PRINT_STATUS_PREPARING) { prepare_data (data); goto out; } if (data->is_preview && !priv->cancelled) { done = TRUE; g_signal_emit_by_name (data->op, "ready", priv->print_context); goto out; } increment_page_sequence (data); if (!data->done) common_render_page (data->op, data->page); else done = priv->page_drawing_state == GTK_PAGE_DRAWING_STATE_READY; out: if (priv->cancelled) { _gtk_print_operation_set_status (data->op, GTK_PRINT_STATUS_FINISHED_ABORTED, NULL); data->is_preview = FALSE; done = TRUE; } if (done && !data->is_preview) { g_signal_emit (data->op, signals[END_PRINT], 0, priv->print_context); priv->end_run (data->op, priv->is_sync, priv->cancelled); } update_progress (data); } return !done; } static void handle_progress_response (GtkWidget *dialog, gint response, gpointer data) { GtkPrintOperation *op = (GtkPrintOperation *)data; gtk_widget_hide (dialog); gtk_print_operation_cancel (op); } static gboolean show_progress_timeout (PrintPagesData *data) { gtk_window_present (GTK_WINDOW (data->progress)); data->op->priv->show_progress_timeout_id = 0; return FALSE; } static void print_pages (GtkPrintOperation *op, GtkWindow *parent, gboolean do_print, GtkPrintOperationResult result) { GtkPrintOperationPrivate *priv = op->priv; PrintPagesData *data; if (!do_print) { _gtk_print_operation_set_status (op, GTK_PRINT_STATUS_FINISHED_ABORTED, NULL); g_signal_emit (op, signals[DONE], 0, result); return; } _gtk_print_operation_set_status (op, GTK_PRINT_STATUS_PREPARING, NULL); data = g_new0 (PrintPagesData, 1); data->op = g_object_ref (op); data->is_preview = (priv->action == GTK_PRINT_OPERATION_ACTION_PREVIEW); if (priv->show_progress) { GtkWidget *progress; progress = gtk_message_dialog_new (parent, 0, GTK_MESSAGE_OTHER, GTK_BUTTONS_CANCEL, _("Preparing")); g_signal_connect (progress, "response", G_CALLBACK (handle_progress_response), op); priv->show_progress_timeout_id = gdk_threads_add_timeout (SHOW_PROGRESS_TIME, (GSourceFunc)show_progress_timeout, data); data->progress = progress; } if (data->is_preview) { gboolean handled; g_signal_emit_by_name (op, "preview", GTK_PRINT_OPERATION_PREVIEW (op), priv->print_context, parent, &handled); if (!handled) { GtkWidget *error_dialog; error_dialog = gtk_message_dialog_new (parent, GTK_DIALOG_MODAL | GTK_DIALOG_DESTROY_WITH_PARENT, GTK_MESSAGE_ERROR, GTK_BUTTONS_OK, _("Error creating print preview")); gtk_message_dialog_format_secondary_text (GTK_MESSAGE_DIALOG (error_dialog), _("The most probable reason is that a temporary file could not be created.")); if (parent && parent->group) gtk_window_group_add_window (parent->group, GTK_WINDOW (error_dialog)); g_signal_connect (error_dialog, "response", G_CALLBACK (gtk_widget_destroy), NULL); gtk_widget_show (error_dialog); print_pages_idle_done (data); return; } if (gtk_print_context_get_cairo_context (priv->print_context) == NULL) { /* Programmer error */ g_error ("You must set a cairo context on the print context"); } priv->start_page = preview_start_page; priv->end_page = preview_end_page; priv->end_run = preview_end_run; priv->print_pages = gtk_print_settings_get_print_pages (priv->print_settings); priv->page_ranges = gtk_print_settings_get_page_ranges (priv->print_settings, &priv->num_page_ranges); priv->manual_num_copies = 1; priv->manual_collation = FALSE; priv->manual_reverse = gtk_print_settings_get_reverse (priv->print_settings); priv->manual_page_set = gtk_print_settings_get_page_set (priv->print_settings); priv->manual_scale = gtk_print_settings_get_scale (priv->print_settings) / 100.0; priv->manual_orientation = TRUE; priv->manual_number_up = gtk_print_settings_get_number_up (priv->print_settings); priv->manual_number_up_layout = gtk_print_settings_get_number_up_layout (priv->print_settings); } priv->print_pages_idle_id = gdk_threads_add_idle_full (G_PRIORITY_DEFAULT_IDLE + 10, print_pages_idle, data, print_pages_idle_done); /* Recursive main loop to make sure we don't exit on sync operations */ if (priv->is_sync) { priv->rloop = g_main_loop_new (NULL, FALSE); g_object_ref (op); GDK_THREADS_LEAVE (); g_main_loop_run (priv->rloop); GDK_THREADS_ENTER (); g_main_loop_unref (priv->rloop); priv->rloop = NULL; g_object_unref (op); } } /** * gtk_print_operation_get_error: * @op: a #GtkPrintOperation * @error: return location for the error * * Call this when the result of a print operation is * %GTK_PRINT_OPERATION_RESULT_ERROR, either as returned by * gtk_print_operation_run(), or in the #GtkPrintOperation::done signal * handler. The returned #GError will contain more details on what went wrong. * * Since: 2.10 **/ void gtk_print_operation_get_error (GtkPrintOperation *op, GError **error) { g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); g_propagate_error (error, op->priv->error); op->priv->error = NULL; } /** * gtk_print_operation_run: * @op: a #GtkPrintOperation * @action: the action to start * @parent: (allow-none): Transient parent of the dialog * @error: (allow-none): Return location for errors, or %NULL * * Runs the print operation, by first letting the user modify * print settings in the print dialog, and then print the document. * * Normally that this function does not return until the rendering of all * pages is complete. You can connect to the * #GtkPrintOperation::status-changed signal on @op to obtain some * information about the progress of the print operation. * Furthermore, it may use a recursive mainloop to show the print dialog. * * If you call gtk_print_operation_set_allow_async() or set the * #GtkPrintOperation:allow-async property the operation will run * asynchronously if this is supported on the platform. The * #GtkPrintOperation::done signal will be emitted with the result of the * operation when the it is done (i.e. when the dialog is canceled, or when * the print succeeds or fails). * |[ * if (settings != NULL) * gtk_print_operation_set_print_settings (print, settings); * * if (page_setup != NULL) * gtk_print_operation_set_default_page_setup (print, page_setup); * * g_signal_connect (print, "begin-print", * G_CALLBACK (begin_print), &data); * g_signal_connect (print, "draw-page", * G_CALLBACK (draw_page), &data); * * res = gtk_print_operation_run (print, * GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG, * parent, * &error); * * if (res == GTK_PRINT_OPERATION_RESULT_ERROR) * { * error_dialog = gtk_message_dialog_new (GTK_WINDOW (parent), * GTK_DIALOG_DESTROY_WITH_PARENT, * GTK_MESSAGE_ERROR, * GTK_BUTTONS_CLOSE, * "Error printing file:\n%s", * error->message); * g_signal_connect (error_dialog, "response", * G_CALLBACK (gtk_widget_destroy), NULL); * gtk_widget_show (error_dialog); * g_error_free (error); * } * else if (res == GTK_PRINT_OPERATION_RESULT_APPLY) * { * if (settings != NULL) * g_object_unref (settings); * settings = g_object_ref (gtk_print_operation_get_print_settings (print)); * } * ]| * * Note that gtk_print_operation_run() can only be called once on a * given #GtkPrintOperation. * * Return value: the result of the print operation. A return value of * %GTK_PRINT_OPERATION_RESULT_APPLY indicates that the printing was * completed successfully. In this case, it is a good idea to obtain * the used print settings with gtk_print_operation_get_print_settings() * and store them for reuse with the next print operation. A value of * %GTK_PRINT_OPERATION_RESULT_IN_PROGRESS means the operation is running * asynchronously, and will emit the #GtkPrintOperation::done signal when * done. * * Since: 2.10 **/ GtkPrintOperationResult gtk_print_operation_run (GtkPrintOperation *op, GtkPrintOperationAction action, GtkWindow *parent, GError **error) { GtkPrintOperationPrivate *priv; GtkPrintOperationResult result; GtkPageSetup *page_setup; gboolean do_print; gboolean run_print_pages; g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), GTK_PRINT_OPERATION_RESULT_ERROR); g_return_val_if_fail (op->priv->status == GTK_PRINT_STATUS_INITIAL, GTK_PRINT_OPERATION_RESULT_ERROR); priv = op->priv; run_print_pages = TRUE; do_print = FALSE; priv->error = NULL; priv->action = action; if (priv->print_settings == NULL) priv->print_settings = gtk_print_settings_new (); if (action == GTK_PRINT_OPERATION_ACTION_EXPORT) { /* note: if you implement async EXPORT, update the docs * docs for the allow-async property. */ priv->is_sync = TRUE; g_return_val_if_fail (priv->export_filename != NULL, GTK_PRINT_OPERATION_RESULT_ERROR); result = run_pdf (op, parent, &do_print); } else if (action == GTK_PRINT_OPERATION_ACTION_PREVIEW) { priv->is_sync = !priv->allow_async; priv->print_context = _gtk_print_context_new (op); page_setup = create_page_setup (op); _gtk_print_context_set_page_setup (priv->print_context, page_setup); g_object_unref (page_setup); do_print = TRUE; result = priv->is_sync ? GTK_PRINT_OPERATION_RESULT_APPLY : GTK_PRINT_OPERATION_RESULT_IN_PROGRESS; } #ifndef G_OS_WIN32 else if (priv->allow_async) { priv->is_sync = FALSE; _gtk_print_operation_platform_backend_run_dialog_async (op, action == GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG, parent, print_pages); result = GTK_PRINT_OPERATION_RESULT_IN_PROGRESS; run_print_pages = FALSE; /* print_pages is called asynchronously from dialog */ } #endif else { priv->is_sync = TRUE; result = _gtk_print_operation_platform_backend_run_dialog (op, action == GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG, parent, &do_print); } if (run_print_pages) print_pages (op, parent, do_print, result); if (priv->error && error) *error = g_error_copy (priv->error); return result; } /** * gtk_print_operation_cancel: * @op: a #GtkPrintOperation * * Cancels a running print operation. This function may * be called from a #GtkPrintOperation::begin-print, * #GtkPrintOperation::paginate or #GtkPrintOperation::draw-page * signal handler to stop the currently running print * operation. * * Since: 2.10 */ void gtk_print_operation_cancel (GtkPrintOperation *op) { g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); op->priv->cancelled = TRUE; } /** * gtk_print_operation_set_support_selection: * @op: a #GtkPrintOperation * @support_selection: %TRUE to support selection * * Sets whether selection is supported by #GtkPrintOperation. * * Since: 2.18 */ void gtk_print_operation_set_support_selection (GtkPrintOperation *op, gboolean support_selection) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); priv = op->priv; support_selection = support_selection != FALSE; if (priv->support_selection != support_selection) { priv->support_selection = support_selection; g_object_notify (G_OBJECT (op), "support-selection"); } } /** * gtk_print_operation_get_support_selection: * @op: a #GtkPrintOperation * * Gets the value of #GtkPrintOperation::support-selection property. * * Returns: whether the application supports print of selection * * Since: 2.18 */ gboolean gtk_print_operation_get_support_selection (GtkPrintOperation *op) { g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), FALSE); return op->priv->support_selection; } /** * gtk_print_operation_set_has_selection: * @op: a #GtkPrintOperation * @has_selection: %TRUE indicates that a selection exists * * Sets whether there is a selection to print. * * Application has to set number of pages to which the selection * will draw by gtk_print_operation_set_n_pages() in a callback of * #GtkPrintOperation::begin-print. * * Since: 2.18 */ void gtk_print_operation_set_has_selection (GtkPrintOperation *op, gboolean has_selection) { GtkPrintOperationPrivate *priv; g_return_if_fail (GTK_IS_PRINT_OPERATION (op)); priv = op->priv; has_selection = has_selection != FALSE; if (priv->has_selection != has_selection) { priv->has_selection = has_selection; g_object_notify (G_OBJECT (op), "has-selection"); } } /** * gtk_print_operation_get_has_selection: * @op: a #GtkPrintOperation * * Gets the value of #GtkPrintOperation::has-selection property. * * Returns: whether there is a selection * * Since: 2.18 */ gboolean gtk_print_operation_get_has_selection (GtkPrintOperation *op) { g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), FALSE); return op->priv->has_selection; } /** * gtk_print_operation_get_n_pages_to_print: * @op: a #GtkPrintOperation * * Returns the number of pages that will be printed. * * Note that this value is set during print preparation phase * (%GTK_PRINT_STATUS_PREPARING), so this function should never be * called before the data generation phase (%GTK_PRINT_STATUS_GENERATING_DATA). * You can connect to the #GtkPrintOperation::status-changed signal * and call gtk_print_operation_get_n_pages_to_print() when * print status is %GTK_PRINT_STATUS_GENERATING_DATA. * This is typically used to track the progress of print operation. * * Returns: the number of pages that will be printed * * Since: 2.18 **/ gint gtk_print_operation_get_n_pages_to_print (GtkPrintOperation *op) { g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), -1); return op->priv->nr_of_pages_to_print; } #define __GTK_PRINT_OPERATION_C__ #include "gtkaliasdef.c"