/* $TOG: PolyReg.c /main/15 1998/02/06 17:47:08 kaleb $ */
/************************************************************************
Copyright 1987, 1998 The Open Group
All Rights Reserved.
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of The Open Group shall not be
used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from The Open Group.
Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts.
All Rights Reserved
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Digital not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
SOFTWARE.
************************************************************************/
/* $XFree86: xc/lib/X11/PolyReg.c,v 1.4 1998/10/03 08:41:21 dawes Exp $ */
#define LARGE_COORDINATE 1000000
#define SMALL_COORDINATE -LARGE_COORDINATE
#include "config.h"
#include <gdkregion.h>
#include "gdkregion-generic.h"
#include "gdkpoly-generic.h"
#include "gdkalias.h"
/*
* InsertEdgeInET
*
* Insert the given edge into the edge table.
* First we must find the correct bucket in the
* Edge table, then find the right slot in the
* bucket. Finally, we can insert it.
*
*/
static void
InsertEdgeInET (EdgeTable *ET,
EdgeTableEntry *ETE,
int scanline,
ScanLineListBlock **SLLBlock,
int *iSLLBlock)
{
EdgeTableEntry *start, *prev;
ScanLineList *pSLL, *pPrevSLL;
ScanLineListBlock *tmpSLLBlock;
/*
* find the right bucket to put the edge into
*/
pPrevSLL = &ET->scanlines;
pSLL = pPrevSLL->next;
while (pSLL && (pSLL->scanline < scanline))
{
pPrevSLL = pSLL;
pSLL = pSLL->next;
}
/*
* reassign pSLL (pointer to ScanLineList) if necessary
*/
if ((!pSLL) || (pSLL->scanline > scanline))
{
if (*iSLLBlock > SLLSPERBLOCK-1)
{
tmpSLLBlock =
(ScanLineListBlock *)g_malloc(sizeof(ScanLineListBlock));
(*SLLBlock)->next = tmpSLLBlock;
tmpSLLBlock->next = (ScanLineListBlock *)NULL;
*SLLBlock = tmpSLLBlock;
*iSLLBlock = 0;
}
pSLL = &((*SLLBlock)->SLLs[(*iSLLBlock)++]);
pSLL->next = pPrevSLL->next;
pSLL->edgelist = (EdgeTableEntry *)NULL;
pPrevSLL->next = pSLL;
}
pSLL->scanline = scanline;
/*
* now insert the edge in the right bucket
*/
prev = (EdgeTableEntry *)NULL;
start = pSLL->edgelist;
while (start && (start->bres.minor_axis < ETE->bres.minor_axis))
{
prev = start;
start = start->next;
}
ETE->next = start;
if (prev)
prev->next = ETE;
else
pSLL->edgelist = ETE;
}
/*
* CreateEdgeTable
*
* This routine creates the edge table for
* scan converting polygons.
* The Edge Table (ET) looks like:
*
* EdgeTable
* --------
* | ymax | ScanLineLists
* |scanline|-->------------>-------------->...
* -------- |scanline| |scanline|
* |edgelist| |edgelist|
* --------- ---------
* | |
* | |
* V V
* list of ETEs list of ETEs
*
* where ETE is an EdgeTableEntry data structure,
* and there is one ScanLineList per scanline at
* which an edge is initially entered.
*
*/
static void
CreateETandAET (int count,
const GdkPoint *pts,
EdgeTable *ET,
EdgeTableEntry *AET,
EdgeTableEntry *pETEs,
ScanLineListBlock *pSLLBlock)
{
const GdkPoint *top, *bottom;
const GdkPoint *PrevPt, *CurrPt;
int iSLLBlock = 0;
int dy;
if (count < 2) return;
/*
* initialize the Active Edge Table
*/
AET->next = (EdgeTableEntry *)NULL;
AET->back = (EdgeTableEntry *)NULL;
AET->nextWETE = (EdgeTableEntry *)NULL;
AET->bres.minor_axis = SMALL_COORDINATE;
/*
* initialize the Edge Table.
*/
ET->scanlines.next = (ScanLineList *)NULL;
ET->ymax = SMALL_COORDINATE;
ET->ymin = LARGE_COORDINATE;
pSLLBlock->next = (ScanLineListBlock *)NULL;
PrevPt = &pts[count-1];
/*
* for each vertex in the array of points.
* In this loop we are dealing with two vertices at
* a time -- these make up one edge of the polygon.
*/
while (count--)
{
CurrPt = pts++;
/*
* find out which point is above and which is below.
*/
if (PrevPt->y > CurrPt->y)
{
bottom = PrevPt, top = CurrPt;
pETEs->ClockWise = 0;
}
else
{
bottom = CurrPt, top = PrevPt;
pETEs->ClockWise = 1;
}
/*
* don't add horizontal edges to the Edge table.
*/
if (bottom->y != top->y)
{
pETEs->ymax = bottom->y-1; /* -1 so we don't get last scanline */
/*
* initialize integer edge algorithm
*/
dy = bottom->y - top->y;
BRESINITPGONSTRUCT(dy, top->x, bottom->x, pETEs->bres);
InsertEdgeInET(ET, pETEs, top->y, &pSLLBlock, &iSLLBlock);
if (PrevPt->y > ET->ymax)
ET->ymax = PrevPt->y;
if (PrevPt->y < ET->ymin)
ET->ymin = PrevPt->y;
pETEs++;
}
PrevPt = CurrPt;
}
}
/*
* loadAET
*
* This routine moves EdgeTableEntries from the
* EdgeTable into the Active Edge Table,
* leaving them sorted by smaller x coordinate.
*
*/
static void
loadAET(EdgeTableEntry *AET,
EdgeTableEntry *ETEs)
{
EdgeTableEntry *pPrevAET;
EdgeTableEntry *tmp;
pPrevAET = AET;
AET = AET->next;
while (ETEs)
{
while (AET && (AET->bres.minor_axis < ETEs->bres.minor_axis))
{
pPrevAET = AET;
AET = AET->next;
}
tmp = ETEs->next;
ETEs->next = AET;
if (AET)
AET->back = ETEs;
ETEs->back = pPrevAET;
pPrevAET->next = ETEs;
pPrevAET = ETEs;
ETEs = tmp;
}
}
/*
* computeWAET
*
* This routine links the AET by the
* nextWETE (winding EdgeTableEntry) link for
* use by the winding number rule. The final
* Active Edge Table (AET) might look something
* like:
*
* AET
* ---------- --------- ---------
* |ymax | |ymax | |ymax |
* | ... | |... | |... |
* |next |->|next |->|next |->...
* |nextWETE| |nextWETE| |nextWETE|
* --------- --------- ^--------
* | | |
* V-------------------> V---> ...
*
*/
static void
computeWAET (EdgeTableEntry *AET)
{
EdgeTableEntry *pWETE;
int inside = 1;
int isInside = 0;
AET->nextWETE = (EdgeTableEntry *)NULL;
pWETE = AET;
AET = AET->next;
while (AET)
{
if (AET->ClockWise)
isInside++;
else
isInside--;
if ((!inside && !isInside) ||
( inside && isInside))
{
pWETE->nextWETE = AET;
pWETE = AET;
inside = !inside;
}
AET = AET->next;
}
pWETE->nextWETE = (EdgeTableEntry *)NULL;
}
/*
* InsertionSort
*
* Just a simple insertion sort using
* pointers and back pointers to sort the Active
* Edge Table.
*
*/
static int
InsertionSort (EdgeTableEntry *AET)
{
EdgeTableEntry *pETEchase;
EdgeTableEntry *pETEinsert;
EdgeTableEntry *pETEchaseBackTMP;
int changed = 0;
AET = AET->next;
while (AET)
{
pETEinsert = AET;
pETEchase = AET;
while (pETEchase->back->bres.minor_axis > AET->bres.minor_axis)
pETEchase = pETEchase->back;
AET = AET->next;
if (pETEchase != pETEinsert)
{
pETEchaseBackTMP = pETEchase->back;
pETEinsert->back->next = AET;
if (AET)
AET->back = pETEinsert->back;
pETEinsert->next = pETEchase;
pETEchase->back->next = pETEinsert;
pETEchase->back = pETEinsert;
pETEinsert->back = pETEchaseBackTMP;
changed = 1;
}
}
return(changed);
}
/*
* Clean up our act.
*/
static void
FreeStorage (ScanLineListBlock *pSLLBlock)
{
ScanLineListBlock *tmpSLLBlock;
while (pSLLBlock)
{
tmpSLLBlock = pSLLBlock->next;
g_free (pSLLBlock);
pSLLBlock = tmpSLLBlock;
}
}
/*
* Create an array of rectangles from a list of points.
* If indeed these things (POINTS, RECTS) are the same,
* then this proc is still needed, because it allocates
* storage for the array, which was allocated on the
* stack by the calling procedure.
*
*/
static int
PtsToRegion (int numFullPtBlocks,
int iCurPtBlock,
POINTBLOCK *FirstPtBlock,
GdkRegion *reg)
{
GdkRegionBox *rects;
GdkPoint *pts;
POINTBLOCK *CurPtBlock;
int i;
GdkRegionBox *extents;
int numRects;
extents = ®->extents;
numRects = ((numFullPtBlocks * NUMPTSTOBUFFER) + iCurPtBlock) >> 1;
GROWREGION(reg, numRects);
CurPtBlock = FirstPtBlock;
rects = reg->rects - 1;
numRects = 0;
extents->x1 = G_MAXSHORT, extents->x2 = G_MINSHORT;
for ( ; numFullPtBlocks >= 0; numFullPtBlocks--) {
/* the loop uses 2 points per iteration */
i = NUMPTSTOBUFFER >> 1;
if (!numFullPtBlocks)
i = iCurPtBlock >> 1;
for (pts = CurPtBlock->pts; i--; pts += 2) {
if (pts->x == pts[1].x)
continue;
if (numRects && pts->x == rects->x1 && pts->y == rects->y2 &&
pts[1].x == rects->x2 &&
(numRects == 1 || rects[-1].y1 != rects->y1) &&
(i && pts[2].y > pts[1].y)) {
rects->y2 = pts[1].y + 1;
continue;
}
numRects++;
rects++;
rects->x1 = pts->x; rects->y1 = pts->y;
rects->x2 = pts[1].x; rects->y2 = pts[1].y + 1;
if (rects->x1 < extents->x1)
extents->x1 = rects->x1;
if (rects->x2 > extents->x2)
extents->x2 = rects->x2;
}
CurPtBlock = CurPtBlock->next;
}
if (numRects) {
extents->y1 = reg->rects->y1;
extents->y2 = rects->y2;
} else {
extents->x1 = 0;
extents->y1 = 0;
extents->x2 = 0;
extents->y2 = 0;
}
reg->numRects = numRects;
return(TRUE);
}
/**
* gdk_region_polygon:
* @points: an array of #GdkPoint structs
* @n_points: the number of elements in the @points array
* @fill_rule: specifies which pixels are included in the region when the
* polygon overlaps itself.
*
* Creates a new #GdkRegion using the polygon defined by a
* number of points.
*
* Returns: a new #GdkRegion based on the given polygon
*
* Deprecated: 2.22: There is no replacement. For working with paths, please
* use Cairo.
*/
GdkRegion *
gdk_region_polygon (const GdkPoint *points,
gint n_points,
GdkFillRule fill_rule)
{
GdkRegion *region;
EdgeTableEntry *pAET; /* Active Edge Table */
int y; /* current scanline */
int iPts = 0; /* number of pts in buffer */
EdgeTableEntry *pWETE; /* Winding Edge Table Entry*/
ScanLineList *pSLL; /* current scanLineList */
GdkPoint *pts; /* output buffer */
EdgeTableEntry *pPrevAET; /* ptr to previous AET */
EdgeTable ET; /* header node for ET */
EdgeTableEntry AET; /* header node for AET */
EdgeTableEntry *pETEs; /* EdgeTableEntries pool */
ScanLineListBlock SLLBlock; /* header for scanlinelist */
int fixWAET = FALSE;
POINTBLOCK FirstPtBlock, *curPtBlock; /* PtBlock buffers */
POINTBLOCK *tmpPtBlock;
int numFullPtBlocks = 0;
region = gdk_region_new ();
/* special case a rectangle */
if (((n_points == 4) ||
((n_points == 5) && (points[4].x == points[0].x) && (points[4].y == points[0].y))) &&
(((points[0].y == points[1].y) &&
(points[1].x == points[2].x) &&
(points[2].y == points[3].y) &&
(points[3].x == points[0].x)) ||
((points[0].x == points[1].x) &&
(points[1].y == points[2].y) &&
(points[2].x == points[3].x) &&
(points[3].y == points[0].y)))) {
region->extents.x1 = MIN(points[0].x, points[2].x);
region->extents.y1 = MIN(points[0].y, points[2].y);
region->extents.x2 = MAX(points[0].x, points[2].x);
region->extents.y2 = MAX(points[0].y, points[2].y);
if ((region->extents.x1 != region->extents.x2) &&
(region->extents.y1 != region->extents.y2)) {
region->numRects = 1;
*(region->rects) = region->extents;
}
return(region);
}
pETEs = g_new (EdgeTableEntry, n_points);
pts = FirstPtBlock.pts;
CreateETandAET(n_points, points, &ET, &AET, pETEs, &SLLBlock);
pSLL = ET.scanlines.next;
curPtBlock = &FirstPtBlock;
if (fill_rule == GDK_EVEN_ODD_RULE) {
/*
* for each scanline
*/
for (y = ET.ymin; y < ET.ymax; y++) {
/*
* Add a new edge to the active edge table when we
* get to the next edge.
*/
if (pSLL != NULL && y == pSLL->scanline) {
loadAET(&AET, pSLL->edgelist);
pSLL = pSLL->next;
}
pPrevAET = &AET;
pAET = AET.next;
/*
* for each active edge
*/
while (pAET) {
pts->x = pAET->bres.minor_axis, pts->y = y;
pts++, iPts++;
/*
* send out the buffer
*/
if (iPts == NUMPTSTOBUFFER) {
tmpPtBlock = (POINTBLOCK *)g_malloc(sizeof(POINTBLOCK));
tmpPtBlock->next = NULL;
curPtBlock->next = tmpPtBlock;
curPtBlock = tmpPtBlock;
pts = curPtBlock->pts;
numFullPtBlocks++;
iPts = 0;
}
EVALUATEEDGEEVENODD(pAET, pPrevAET, y);
}
(void) InsertionSort(&AET);
}
}
else {
/*
* for each scanline
*/
for (y = ET.ymin; y < ET.ymax; y++) {
/*
* Add a new edge to the active edge table when we
* get to the next edge.
*/
if (pSLL != NULL && y == pSLL->scanline) {
loadAET(&AET, pSLL->edgelist);
computeWAET(&AET);
pSLL = pSLL->next;
}
pPrevAET = &AET;
pAET = AET.next;
pWETE = pAET;
/*
* for each active edge
*/
while (pAET) {
/*
* add to the buffer only those edges that
* are in the Winding active edge table.
*/
if (pWETE == pAET) {
pts->x = pAET->bres.minor_axis, pts->y = y;
pts++, iPts++;
/*
* send out the buffer
*/
if (iPts == NUMPTSTOBUFFER) {
tmpPtBlock = (POINTBLOCK *)g_malloc(sizeof(POINTBLOCK));
tmpPtBlock->next = NULL;
curPtBlock->next = tmpPtBlock;
curPtBlock = tmpPtBlock;
pts = curPtBlock->pts;
numFullPtBlocks++; iPts = 0;
}
pWETE = pWETE->nextWETE;
}
EVALUATEEDGEWINDING(pAET, pPrevAET, y, fixWAET);
}
/*
* recompute the winding active edge table if
* we just resorted or have exited an edge.
*/
if (InsertionSort(&AET) || fixWAET) {
computeWAET(&AET);
fixWAET = FALSE;
}
}
}
FreeStorage(SLLBlock.next);
(void) PtsToRegion(numFullPtBlocks, iPts, &FirstPtBlock, region);
for (curPtBlock = FirstPtBlock.next; --numFullPtBlocks >= 0;) {
tmpPtBlock = curPtBlock->next;
g_free (curPtBlock);
curPtBlock = tmpPtBlock;
}
g_free (pETEs);
return(region);
}
#define __GDK_POLYREG_GENERIC_C__
#include "gdkaliasdef.c"