/* GTK - The GIMP Toolkit
* gtkprintoperation.c: Print Operation
* Copyright (C) 2006, Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
*/
#include "config.h"
#include <errno.h>
#include <stdlib.h>
#include <math.h>
#include <string.h>
#include "gtkprintoperation-private.h"
#include "gtkmarshalers.h"
#include <cairo-pdf.h>
#include "gtkintl.h"
#include "gtkprivate.h"
#include "gtkmessagedialog.h"
#include "gtkalias.h"
#define SHOW_PROGRESS_TIME 1200
#define GTK_PRINT_OPERATION_GET_PRIVATE(obj)(G_TYPE_INSTANCE_GET_PRIVATE ((obj), GTK_TYPE_PRINT_OPERATION, GtkPrintOperationPrivate))
enum
{
DONE,
BEGIN_PRINT,
PAGINATE,
REQUEST_PAGE_SETUP,
DRAW_PAGE,
END_PRINT,
STATUS_CHANGED,
CREATE_CUSTOM_WIDGET,
CUSTOM_WIDGET_APPLY,
PREVIEW,
UPDATE_CUSTOM_WIDGET,
LAST_SIGNAL
};
enum
{
PROP_0,
PROP_DEFAULT_PAGE_SETUP,
PROP_PRINT_SETTINGS,
PROP_JOB_NAME,
PROP_N_PAGES,
PROP_CURRENT_PAGE,
PROP_USE_FULL_PAGE,
PROP_TRACK_PRINT_STATUS,
PROP_UNIT,
PROP_SHOW_PROGRESS,
PROP_ALLOW_ASYNC,
PROP_EXPORT_FILENAME,
PROP_STATUS,
PROP_STATUS_STRING,
PROP_CUSTOM_TAB_LABEL,
PROP_EMBED_PAGE_SETUP,
PROP_HAS_SELECTION,
PROP_SUPPORT_SELECTION,
PROP_N_PAGES_TO_PRINT
};
static guint signals[LAST_SIGNAL] = { 0 };
static int job_nr = 0;
typedef struct _PrintPagesData PrintPagesData;
static void preview_iface_init (GtkPrintOperationPreviewIface *iface);
static GtkPageSetup *create_page_setup (GtkPrintOperation *op);
static void common_render_page (GtkPrintOperation *op,
gint page_nr);
static void increment_page_sequence (PrintPagesData *data);
static void prepare_data (PrintPagesData *data);
static void clamp_page_ranges (PrintPagesData *data);
G_DEFINE_TYPE_WITH_CODE (GtkPrintOperation, gtk_print_operation, G_TYPE_OBJECT,
G_IMPLEMENT_INTERFACE (GTK_TYPE_PRINT_OPERATION_PREVIEW,
preview_iface_init))
/**
* gtk_print_error_quark:
*
* Registers an error quark for #GtkPrintOperation if necessary.
*
* Return value: The error quark used for #GtkPrintOperation errors.
*
* Since: 2.10
**/
GQuark
gtk_print_error_quark (void)
{
static GQuark quark = 0;
if (quark == 0)
quark = g_quark_from_static_string ("gtk-print-error-quark");
return quark;
}
static void
gtk_print_operation_finalize (GObject *object)
{
GtkPrintOperation *print_operation = GTK_PRINT_OPERATION (object);
GtkPrintOperationPrivate *priv = print_operation->priv;
if (priv->free_platform_data &&
priv->platform_data)
{
priv->free_platform_data (priv->platform_data);
priv->free_platform_data = NULL;
}
if (priv->default_page_setup)
g_object_unref (priv->default_page_setup);
if (priv->print_settings)
g_object_unref (priv->print_settings);
if (priv->print_context)
g_object_unref (priv->print_context);
g_free (priv->export_filename);
g_free (priv->job_name);
g_free (priv->custom_tab_label);
g_free (priv->status_string);
if (priv->print_pages_idle_id > 0)
g_source_remove (priv->print_pages_idle_id);
if (priv->show_progress_timeout_id > 0)
g_source_remove (priv->show_progress_timeout_id);
if (priv->error)
g_error_free (priv->error);
G_OBJECT_CLASS (gtk_print_operation_parent_class)->finalize (object);
}
static void
gtk_print_operation_init (GtkPrintOperation *operation)
{
GtkPrintOperationPrivate *priv;
const char *appname;
priv = operation->priv = GTK_PRINT_OPERATION_GET_PRIVATE (operation);
priv->status = GTK_PRINT_STATUS_INITIAL;
priv->status_string = g_strdup ("");
priv->default_page_setup = NULL;
priv->print_settings = NULL;
priv->nr_of_pages = -1;
priv->nr_of_pages_to_print = -1;
priv->page_position = -1;
priv->current_page = -1;
priv->use_full_page = FALSE;
priv->show_progress = FALSE;
priv->export_filename = NULL;
priv->track_print_status = FALSE;
priv->is_sync = FALSE;
priv->support_selection = FALSE;
priv->has_selection = FALSE;
priv->embed_page_setup = FALSE;
priv->page_drawing_state = GTK_PAGE_DRAWING_STATE_READY;
priv->rloop = NULL;
priv->unit = GTK_UNIT_PIXEL;
appname = g_get_application_name ();
if (appname == NULL)
appname = "";
/* translators: this string is the default job title for print
* jobs. %s gets replaced by the application name, %d gets replaced
* by the job number.
*/
priv->job_name = g_strdup_printf (_("%s job #%d"), appname, ++job_nr);
}
static void
preview_iface_render_page (GtkPrintOperationPreview *preview,
gint page_nr)
{
GtkPrintOperation *op;
op = GTK_PRINT_OPERATION (preview);
common_render_page (op, page_nr);
}
static void
preview_iface_end_preview (GtkPrintOperationPreview *preview)
{
GtkPrintOperation *op;
op = GTK_PRINT_OPERATION (preview);
g_signal_emit (op, signals[END_PRINT], 0, op->priv->print_context);
if (op->priv->rloop)
g_main_loop_quit (op->priv->rloop);
if (op->priv->end_run)
op->priv->end_run (op, op->priv->is_sync, TRUE);
_gtk_print_operation_set_status (op, GTK_PRINT_STATUS_FINISHED, NULL);
g_signal_emit (op, signals[DONE], 0, GTK_PRINT_OPERATION_RESULT_APPLY);
}
static gboolean
preview_iface_is_selected (GtkPrintOperationPreview *preview,
gint page_nr)
{
GtkPrintOperation *op;
GtkPrintOperationPrivate *priv;
int i;
op = GTK_PRINT_OPERATION (preview);
priv = op->priv;
switch (priv->print_pages)
{
case GTK_PRINT_PAGES_SELECTION:
case GTK_PRINT_PAGES_ALL:
return (page_nr >= 0) && (page_nr < priv->nr_of_pages);
case GTK_PRINT_PAGES_CURRENT:
return page_nr == priv->current_page;
case GTK_PRINT_PAGES_RANGES:
for (i = 0; i < priv->num_page_ranges; i++)
{
if (page_nr >= priv->page_ranges[i].start &&
(page_nr <= priv->page_ranges[i].end || priv->page_ranges[i].end == -1))
return TRUE;
}
return FALSE;
}
return FALSE;
}
static void
preview_iface_init (GtkPrintOperationPreviewIface *iface)
{
iface->render_page = preview_iface_render_page;
iface->end_preview = preview_iface_end_preview;
iface->is_selected = preview_iface_is_selected;
}
static void
preview_start_page (GtkPrintOperation *op,
GtkPrintContext *print_context,
GtkPageSetup *page_setup)
{
if ((op->priv->manual_number_up < 2) ||
(op->priv->page_position % op->priv->manual_number_up == 0))
g_signal_emit_by_name (op, "got-page-size", print_context, page_setup);
}
static void
preview_end_page (GtkPrintOperation *op,
GtkPrintContext *print_context)
{
cairo_t *cr;
cr = gtk_print_context_get_cairo_context (print_context);
if ((op->priv->manual_number_up < 2) ||
((op->priv->page_position + 1) % op->priv->manual_number_up == 0) ||
(op->priv->page_position == op->priv->nr_of_pages_to_print - 1))
cairo_show_page (cr);
}
static void
preview_end_run (GtkPrintOperation *op,
gboolean wait,
gboolean cancelled)
{
g_free (op->priv->page_ranges);
op->priv->page_ranges = NULL;
}
static void
gtk_print_operation_set_property (GObject *object,
guint prop_id,
const GValue *value,
GParamSpec *pspec)
{
GtkPrintOperation *op = GTK_PRINT_OPERATION (object);
switch (prop_id)
{
case PROP_DEFAULT_PAGE_SETUP:
gtk_print_operation_set_default_page_setup (op, g_value_get_object (value));
break;
case PROP_PRINT_SETTINGS:
gtk_print_operation_set_print_settings (op, g_value_get_object (value));
break;
case PROP_JOB_NAME:
gtk_print_operation_set_job_name (op, g_value_get_string (value));
break;
case PROP_N_PAGES:
gtk_print_operation_set_n_pages (op, g_value_get_int (value));
break;
case PROP_CURRENT_PAGE:
gtk_print_operation_set_current_page (op, g_value_get_int (value));
break;
case PROP_USE_FULL_PAGE:
gtk_print_operation_set_use_full_page (op, g_value_get_boolean (value));
break;
case PROP_TRACK_PRINT_STATUS:
gtk_print_operation_set_track_print_status (op, g_value_get_boolean (value));
break;
case PROP_UNIT:
gtk_print_operation_set_unit (op, g_value_get_enum (value));
break;
case PROP_ALLOW_ASYNC:
gtk_print_operation_set_allow_async (op, g_value_get_boolean (value));
break;
case PROP_SHOW_PROGRESS:
gtk_print_operation_set_show_progress (op, g_value_get_boolean (value));
break;
case PROP_EXPORT_FILENAME:
gtk_print_operation_set_export_filename (op, g_value_get_string (value));
break;
case PROP_CUSTOM_TAB_LABEL:
gtk_print_operation_set_custom_tab_label (op, g_value_get_string (value));
break;
case PROP_EMBED_PAGE_SETUP:
gtk_print_operation_set_embed_page_setup (op, g_value_get_boolean (value));
break;
case PROP_HAS_SELECTION:
gtk_print_operation_set_has_selection (op, g_value_get_boolean (value));
break;
case PROP_SUPPORT_SELECTION:
gtk_print_operation_set_support_selection (op, g_value_get_boolean (value));
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
gtk_print_operation_get_property (GObject *object,
guint prop_id,
GValue *value,
GParamSpec *pspec)
{
GtkPrintOperation *op = GTK_PRINT_OPERATION (object);
GtkPrintOperationPrivate *priv = op->priv;
switch (prop_id)
{
case PROP_DEFAULT_PAGE_SETUP:
g_value_set_object (value, priv->default_page_setup);
break;
case PROP_PRINT_SETTINGS:
g_value_set_object (value, priv->print_settings);
break;
case PROP_JOB_NAME:
g_value_set_string (value, priv->job_name);
break;
case PROP_N_PAGES:
g_value_set_int (value, priv->nr_of_pages);
break;
case PROP_CURRENT_PAGE:
g_value_set_int (value, priv->current_page);
break;
case PROP_USE_FULL_PAGE:
g_value_set_boolean (value, priv->use_full_page);
break;
case PROP_TRACK_PRINT_STATUS:
g_value_set_boolean (value, priv->track_print_status);
break;
case PROP_UNIT:
g_value_set_enum (value, priv->unit);
break;
case PROP_ALLOW_ASYNC:
g_value_set_boolean (value, priv->allow_async);
break;
case PROP_SHOW_PROGRESS:
g_value_set_boolean (value, priv->show_progress);
break;
case PROP_EXPORT_FILENAME:
g_value_set_string (value, priv->export_filename);
break;
case PROP_STATUS:
g_value_set_enum (value, priv->status);
break;
case PROP_STATUS_STRING:
g_value_set_string (value, priv->status_string);
break;
case PROP_CUSTOM_TAB_LABEL:
g_value_set_string (value, priv->custom_tab_label);
break;
case PROP_EMBED_PAGE_SETUP:
g_value_set_boolean (value, priv->embed_page_setup);
break;
case PROP_HAS_SELECTION:
g_value_set_boolean (value, priv->has_selection);
break;
case PROP_SUPPORT_SELECTION:
g_value_set_boolean (value, priv->support_selection);
break;
case PROP_N_PAGES_TO_PRINT:
g_value_set_int (value, priv->nr_of_pages_to_print);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
struct _PrintPagesData
{
GtkPrintOperation *op;
gint uncollated_copies;
gint collated_copies;
gint uncollated, collated, total;
gint range, num_ranges;
GtkPageRange *ranges;
GtkPageRange one_range;
gint page;
gint sheet;
gint first_position, last_position;
gint first_sheet;
gint num_of_sheets;
gint *pages;
GtkWidget *progress;
gboolean initialized;
gboolean is_preview;
gboolean done;
};
typedef struct
{
GtkPrintOperationPreview *preview;
GtkPrintContext *print_context;
GtkWindow *parent;
cairo_surface_t *surface;
gchar *filename;
gboolean wait;
PrintPagesData *pages_data;
} PreviewOp;
static void
preview_print_idle_done (gpointer data)
{
GtkPrintOperation *op;
PreviewOp *pop = (PreviewOp *) data;
op = GTK_PRINT_OPERATION (pop->preview);
cairo_surface_finish (pop->surface);
/* Surface is destroyed in launch_preview */
_gtk_print_operation_platform_backend_launch_preview (op,
pop->surface,
pop->parent,
pop->filename);
g_free (pop->filename);
gtk_print_operation_preview_end_preview (pop->preview);
g_object_unref (pop->pages_data->op);
g_free (pop->pages_data->pages);
g_free (pop->pages_data);
g_object_unref (op);
g_free (pop);
}
static gboolean
preview_print_idle (gpointer data)
{
PreviewOp *pop;
GtkPrintOperation *op;
GtkPrintOperationPrivate *priv;
gboolean done = FALSE;
pop = (PreviewOp *) data;
op = GTK_PRINT_OPERATION (pop->preview);
priv = op->priv;
if (priv->page_drawing_state == GTK_PAGE_DRAWING_STATE_READY)
{
if (!pop->pages_data->initialized)
{
pop->pages_data->initialized = TRUE;
prepare_data (pop->pages_data);
}
else
{
increment_page_sequence (pop->pages_data);
if (!pop->pages_data->done)
gtk_print_operation_preview_render_page (pop->preview, pop->pages_data->page);
else
done = priv->page_drawing_state == GTK_PAGE_DRAWING_STATE_READY;
}
}
return !done;
}
static void
preview_got_page_size (GtkPrintOperationPreview *preview,
GtkPrintContext *context,
GtkPageSetup *page_setup,
PreviewOp *pop)
{
GtkPrintOperation *op = GTK_PRINT_OPERATION (preview);
cairo_t *cr;
_gtk_print_operation_platform_backend_resize_preview_surface (op, page_setup, pop->surface);
cr = gtk_print_context_get_cairo_context (pop->print_context);
_gtk_print_operation_platform_backend_preview_start_page (op, pop->surface, cr);
}
static void
preview_ready (GtkPrintOperationPreview *preview,
GtkPrintContext *context,
PreviewOp *pop)
{
pop->print_context = context;
g_object_ref (preview);
gdk_threads_add_idle_full (G_PRIORITY_DEFAULT_IDLE + 10,
preview_print_idle,
pop,
preview_print_idle_done);
}
static gboolean
gtk_print_operation_preview_handler (GtkPrintOperation *op,
GtkPrintOperationPreview *preview,
GtkPrintContext *context,
GtkWindow *parent)
{
gdouble dpi_x, dpi_y;
PreviewOp *pop;
GtkPageSetup *page_setup;
cairo_t *cr;
pop = g_new0 (PreviewOp, 1);
pop->filename = NULL;
pop->preview = preview;
pop->parent = parent;
pop->pages_data = g_new0 (PrintPagesData, 1);
pop->pages_data->op = g_object_ref (GTK_PRINT_OPERATION (preview));
pop->pages_data->is_preview = TRUE;
page_setup = gtk_print_context_get_page_setup (context);
pop->surface =
_gtk_print_operation_platform_backend_create_preview_surface (op,
page_setup,
&dpi_x, &dpi_y,
&pop->filename);
if (pop->surface == NULL)
{
g_free (pop);
return FALSE;
}
cr = cairo_create (pop->surface);
gtk_print_context_set_cairo_context (op->priv->print_context, cr,
dpi_x, dpi_y);
cairo_destroy (cr);
g_signal_connect (preview, "ready", (GCallback) preview_ready, pop);
g_signal_connect (preview, "got-page-size", (GCallback) preview_got_page_size, pop);
return TRUE;
}
static GtkWidget *
gtk_print_operation_create_custom_widget (GtkPrintOperation *operation)
{
return NULL;
}
static gboolean
gtk_print_operation_paginate (GtkPrintOperation *operation,
GtkPrintContext *context)
{
/* assume the number of pages is already set and pagination is not needed */
return TRUE;
}
static void
gtk_print_operation_done (GtkPrintOperation *operation,
GtkPrintOperationResult result)
{
GtkPrintOperationPrivate *priv = operation->priv;
if (priv->print_context)
{
g_object_unref (priv->print_context);
priv->print_context = NULL;
}
}
static gboolean
custom_widget_accumulator (GSignalInvocationHint *ihint,
GValue *return_accu,
const GValue *handler_return,
gpointer dummy)
{
gboolean continue_emission;
GtkWidget *widget;
widget = g_value_get_object (handler_return);
if (widget != NULL)
g_value_set_object (return_accu, widget);
continue_emission = (widget == NULL);
return continue_emission;
}
static gboolean
paginate_accumulator (GSignalInvocationHint *ihint,
GValue *return_accu,
const GValue *handler_return,
gpointer dummy)
{
*return_accu = *handler_return;
/* Stop signal emission on first invocation, so if it's a callback then
* the default handler won't run. */
return FALSE;
}
static void
gtk_print_operation_class_init (GtkPrintOperationClass *class)
{
GObjectClass *gobject_class = (GObjectClass *)class;
gobject_class->set_property = gtk_print_operation_set_property;
gobject_class->get_property = gtk_print_operation_get_property;
gobject_class->finalize = gtk_print_operation_finalize;
class->preview = gtk_print_operation_preview_handler;
class->create_custom_widget = gtk_print_operation_create_custom_widget;
class->paginate = gtk_print_operation_paginate;
class->done = gtk_print_operation_done;
g_type_class_add_private (gobject_class, sizeof (GtkPrintOperationPrivate));
/**
* GtkPrintOperation::done:
* @operation: the #GtkPrintOperation on which the signal was emitted
* @result: the result of the print operation
*
* Emitted when the print operation run has finished doing
* everything required for printing.
*
* @result gives you information about what happened during the run.
* If @result is %GTK_PRINT_OPERATION_RESULT_ERROR then you can call
* gtk_print_operation_get_error() for more information.
*
* If you enabled print status tracking then
* gtk_print_operation_is_finished() may still return %FALSE
* after #GtkPrintOperation::done was emitted.
*
* Since: 2.10
*/
signals[DONE] =
g_signal_new (I_("done"),
G_TYPE_FROM_CLASS (gobject_class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, done),
NULL, NULL,
g_cclosure_marshal_VOID__ENUM,
G_TYPE_NONE, 1, GTK_TYPE_PRINT_OPERATION_RESULT);
/**
* GtkPrintOperation::begin-print:
* @operation: the #GtkPrintOperation on which the signal was emitted
* @context: the #GtkPrintContext for the current operation
*
* Emitted after the user has finished changing print settings
* in the dialog, before the actual rendering starts.
*
* A typical use for ::begin-print is to use the parameters from the
* #GtkPrintContext and paginate the document accordingly, and then
* set the number of pages with gtk_print_operation_set_n_pages().
*
* Since: 2.10
*/
signals[BEGIN_PRINT] =
g_signal_new (I_("begin-print"),
G_TYPE_FROM_CLASS (gobject_class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, begin_print),
NULL, NULL,
g_cclosure_marshal_VOID__OBJECT,
G_TYPE_NONE, 1, GTK_TYPE_PRINT_CONTEXT);
/**
* GtkPrintOperation::paginate:
* @operation: the #GtkPrintOperation on which the signal was emitted
* @context: the #GtkPrintContext for the current operation
*
* Emitted after the #GtkPrintOperation::begin-print signal, but before
* the actual rendering starts. It keeps getting emitted until a connected
* signal handler returns %TRUE.
*
* The ::paginate signal is intended to be used for paginating a document
* in small chunks, to avoid blocking the user interface for a long
* time. The signal handler should update the number of pages using
* gtk_print_operation_set_n_pages(), and return %TRUE if the document
* has been completely paginated.
*
* If you don't need to do pagination in chunks, you can simply do
* it all in the ::begin-print handler, and set the number of pages
* from there.
*
* Return value: %TRUE if pagination is complete
*
* Since: 2.10
*/
signals[PAGINATE] =
g_signal_new (I_("paginate"),
G_TYPE_FROM_CLASS (gobject_class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, paginate),
paginate_accumulator, NULL,
_gtk_marshal_BOOLEAN__OBJECT,
G_TYPE_BOOLEAN, 1, GTK_TYPE_PRINT_CONTEXT);
/**
* GtkPrintOperation::request-page-setup:
* @operation: the #GtkPrintOperation on which the signal was emitted
* @context: the #GtkPrintContext for the current operation
* @page_nr: the number of the currently printed page (0-based)
* @setup: the #GtkPageSetup
*
* Emitted once for every page that is printed, to give
* the application a chance to modify the page setup. Any changes
* done to @setup will be in force only for printing this page.
*
* Since: 2.10
*/
signals[REQUEST_PAGE_SETUP] =
g_signal_new (I_("request-page-setup"),
G_TYPE_FROM_CLASS (gobject_class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, request_page_setup),
NULL, NULL,
_gtk_marshal_VOID__OBJECT_INT_OBJECT,
G_TYPE_NONE, 3,
GTK_TYPE_PRINT_CONTEXT,
G_TYPE_INT,
GTK_TYPE_PAGE_SETUP);
/**
* GtkPrintOperation::draw-page:
* @operation: the #GtkPrintOperation on which the signal was emitted
* @context: the #GtkPrintContext for the current operation
* @page_nr: the number of the currently printed page (0-based)
*
* Emitted for every page that is printed. The signal handler
* must render the @page_nr's page onto the cairo context obtained
* from @context using gtk_print_context_get_cairo_context().
* |[
* static void
* draw_page (GtkPrintOperation *operation,
* GtkPrintContext *context,
* gint page_nr,
* gpointer user_data)
* {
* cairo_t *cr;
* PangoLayout *layout;
* gdouble width, text_height;
* gint layout_height;
* PangoFontDescription *desc;
*
* cr = gtk_print_context_get_cairo_context (context);
* width = gtk_print_context_get_width (context);
*
* cairo_rectangle (cr, 0, 0, width, HEADER_HEIGHT);
*
* cairo_set_source_rgb (cr, 0.8, 0.8, 0.8);
* cairo_fill (cr);
*
* layout = gtk_print_context_create_pango_layout (context);
*
* desc = pango_font_description_from_string ("sans 14");
* pango_layout_set_font_description (layout, desc);
* pango_font_description_free (desc);
*
* pango_layout_set_text (layout, "some text", -1);
* pango_layout_set_width (layout, width * PANGO_SCALE);
* pango_layout_set_alignment (layout, PANGO_ALIGN_CENTER);
*
* pango_layout_get_size (layout, NULL, &layout_height);
* text_height = (gdouble)layout_height / PANGO_SCALE;
*
* cairo_move_to (cr, width / 2, (HEADER_HEIGHT - text_height) / 2);
* pango_cairo_show_layout (cr, layout);
*
* g_object_unref (layout);
* }
* ]|
*
* Use gtk_print_operation_set_use_full_page() and
* gtk_print_operation_set_unit() before starting the print operation
* to set up the transformation of the cairo context according to your
* needs.
*
* Since: 2.10
*/
signals[DRAW_PAGE] =
g_signal_new (I_("draw-page"),
G_TYPE_FROM_CLASS (gobject_class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, draw_page),
NULL, NULL,
_gtk_marshal_VOID__OBJECT_INT,
G_TYPE_NONE, 2,
GTK_TYPE_PRINT_CONTEXT,
G_TYPE_INT);
/**
* GtkPrintOperation::end-print:
* @operation: the #GtkPrintOperation on which the signal was emitted
* @context: the #GtkPrintContext for the current operation
*
* Emitted after all pages have been rendered.
* A handler for this signal can clean up any resources that have
* been allocated in the #GtkPrintOperation::begin-print handler.
*
* Since: 2.10
*/
signals[END_PRINT] =
g_signal_new (I_("end-print"),
G_TYPE_FROM_CLASS (gobject_class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, end_print),
NULL, NULL,
g_cclosure_marshal_VOID__OBJECT,
G_TYPE_NONE, 1, GTK_TYPE_PRINT_CONTEXT);
/**
* GtkPrintOperation::status-changed:
* @operation: the #GtkPrintOperation on which the signal was emitted
*
* Emitted at between the various phases of the print operation.
* See #GtkPrintStatus for the phases that are being discriminated.
* Use gtk_print_operation_get_status() to find out the current
* status.
*
* Since: 2.10
*/
signals[STATUS_CHANGED] =
g_signal_new (I_("status-changed"),
G_TYPE_FROM_CLASS (class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, status_changed),
NULL, NULL,
g_cclosure_marshal_VOID__VOID,
G_TYPE_NONE, 0);
/**
* GtkPrintOperation::create-custom-widget:
* @operation: the #GtkPrintOperation on which the signal was emitted
*
* Emitted when displaying the print dialog. If you return a
* widget in a handler for this signal it will be added to a custom
* tab in the print dialog. You typically return a container widget
* with multiple widgets in it.
*
* The print dialog owns the returned widget, and its lifetime is not
* controlled by the application. However, the widget is guaranteed
* to stay around until the #GtkPrintOperation::custom-widget-apply
* signal is emitted on the operation. Then you can read out any
* information you need from the widgets.
*
* Returns: (transfer none): A custom widget that gets embedded in
* the print dialog, or %NULL
*
* Since: 2.10
*/
signals[CREATE_CUSTOM_WIDGET] =
g_signal_new (I_("create-custom-widget"),
G_TYPE_FROM_CLASS (class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, create_custom_widget),
custom_widget_accumulator, NULL,
_gtk_marshal_OBJECT__VOID,
G_TYPE_OBJECT, 0);
/**
* GtkPrintOperation::update-custom-widget:
* @operation: the #GtkPrintOperation on which the signal was emitted
* @widget: the custom widget added in create-custom-widget
* @setup: actual page setup
* @settings: actual print settings
*
* Emitted after change of selected printer. The actual page setup and
* print settings are passed to the custom widget, which can actualize
* itself according to this change.
*
* Since: 2.18
*/
signals[UPDATE_CUSTOM_WIDGET] =
g_signal_new (I_("update-custom-widget"),
G_TYPE_FROM_CLASS (class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, update_custom_widget),
NULL, NULL,
_gtk_marshal_VOID__OBJECT_OBJECT_OBJECT,
G_TYPE_NONE, 3, GTK_TYPE_WIDGET, GTK_TYPE_PAGE_SETUP, GTK_TYPE_PRINT_SETTINGS);
/**
* GtkPrintOperation::custom-widget-apply:
* @operation: the #GtkPrintOperation on which the signal was emitted
* @widget: the custom widget added in create-custom-widget
*
* Emitted right before #GtkPrintOperation::begin-print if you added
* a custom widget in the #GtkPrintOperation::create-custom-widget handler.
* When you get this signal you should read the information from the
* custom widgets, as the widgets are not guaraneed to be around at a
* later time.
*
* Since: 2.10
*/
signals[CUSTOM_WIDGET_APPLY] =
g_signal_new (I_("custom-widget-apply"),
G_TYPE_FROM_CLASS (class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, custom_widget_apply),
NULL, NULL,
g_cclosure_marshal_VOID__OBJECT,
G_TYPE_NONE, 1, GTK_TYPE_WIDGET);
/**
* GtkPrintOperation::preview:
* @operation: the #GtkPrintOperation on which the signal was emitted
* @preview: the #GtkPrintPreviewOperation for the current operation
* @context: the #GtkPrintContext that will be used
* @parent: (allow-none): the #GtkWindow to use as window parent, or %NULL
*
* Gets emitted when a preview is requested from the native dialog.
*
* The default handler for this signal uses an external viewer
* application to preview.
*
* To implement a custom print preview, an application must return
* %TRUE from its handler for this signal. In order to use the
* provided @context for the preview implementation, it must be
* given a suitable cairo context with gtk_print_context_set_cairo_context().
*
* The custom preview implementation can use
* gtk_print_operation_preview_is_selected() and
* gtk_print_operation_preview_render_page() to find pages which
* are selected for print and render them. The preview must be
* finished by calling gtk_print_operation_preview_end_preview()
* (typically in response to the user clicking a close button).
*
* Returns: %TRUE if the listener wants to take over control of the preview
*
* Since: 2.10
*/
signals[PREVIEW] =
g_signal_new (I_("preview"),
G_TYPE_FROM_CLASS (gobject_class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, preview),
_gtk_boolean_handled_accumulator, NULL,
_gtk_marshal_BOOLEAN__OBJECT_OBJECT_OBJECT,
G_TYPE_BOOLEAN, 3,
GTK_TYPE_PRINT_OPERATION_PREVIEW,
GTK_TYPE_PRINT_CONTEXT,
GTK_TYPE_WINDOW);
/**
* GtkPrintOperation:default-page-setup:
*
* The #GtkPageSetup used by default.
*
* This page setup will be used by gtk_print_operation_run(),
* but it can be overridden on a per-page basis by connecting
* to the #GtkPrintOperation::request-page-setup signal.
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_DEFAULT_PAGE_SETUP,
g_param_spec_object ("default-page-setup",
P_("Default Page Setup"),
P_("The GtkPageSetup used by default"),
GTK_TYPE_PAGE_SETUP,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:print-settings:
*
* The #GtkPrintSettings used for initializing the dialog.
*
* Setting this property is typically used to re-establish
* print settings from a previous print operation, see
* gtk_print_operation_run().
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_PRINT_SETTINGS,
g_param_spec_object ("print-settings",
P_("Print Settings"),
P_("The GtkPrintSettings used for initializing the dialog"),
GTK_TYPE_PRINT_SETTINGS,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:job-name:
*
* A string used to identify the job (e.g. in monitoring
* applications like eggcups).
*
* If you don't set a job name, GTK+ picks a default one
* by numbering successive print jobs.
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_JOB_NAME,
g_param_spec_string ("job-name",
P_("Job Name"),
P_("A string used for identifying the print job."),
"",
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:n-pages:
*
* The number of pages in the document.
*
* This <emphasis>must</emphasis> be set to a positive number
* before the rendering starts. It may be set in a
* #GtkPrintOperation::begin-print signal hander.
*
* Note that the page numbers passed to the
* #GtkPrintOperation::request-page-setup and
* #GtkPrintOperation::draw-page signals are 0-based, i.e. if
* the user chooses to print all pages, the last ::draw-page signal
* will be for page @n_pages - 1.
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_N_PAGES,
g_param_spec_int ("n-pages",
P_("Number of Pages"),
P_("The number of pages in the document."),
-1,
G_MAXINT,
-1,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:current-page:
*
* The current page in the document.
*
* If this is set before gtk_print_operation_run(),
* the user will be able to select to print only the current page.
*
* Note that this only makes sense for pre-paginated documents.
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_CURRENT_PAGE,
g_param_spec_int ("current-page",
P_("Current Page"),
P_("The current page in the document"),
-1,
G_MAXINT,
-1,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:use-full-page:
*
* If %TRUE, the transformation for the cairo context obtained
* from #GtkPrintContext puts the origin at the top left corner
* of the page (which may not be the top left corner of the sheet,
* depending on page orientation and the number of pages per sheet).
* Otherwise, the origin is at the top left corner of the imageable
* area (i.e. inside the margins).
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_USE_FULL_PAGE,
g_param_spec_boolean ("use-full-page",
P_("Use full page"),
P_("TRUE if the origin of the context should be at the corner of the page and not the corner of the imageable area"),
FALSE,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:track-print-status:
*
* If %TRUE, the print operation will try to continue report on
* the status of the print job in the printer queues and printer.
* This can allow your application to show things like "out of paper"
* issues, and when the print job actually reaches the printer.
* However, this is often implemented using polling, and should
* not be enabled unless needed.
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_TRACK_PRINT_STATUS,
g_param_spec_boolean ("track-print-status",
P_("Track Print Status"),
P_("TRUE if the print operation will continue to report on the print job status after the print data has been sent to the printer or print server."),
FALSE,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:unit:
*
* The transformation for the cairo context obtained from
* #GtkPrintContext is set up in such a way that distances
* are measured in units of @unit.
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_UNIT,
g_param_spec_enum ("unit",
P_("Unit"),
P_("The unit in which distances can be measured in the context"),
GTK_TYPE_UNIT,
GTK_UNIT_PIXEL,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:show-progress:
*
* Determines whether to show a progress dialog during the
* print operation.
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_SHOW_PROGRESS,
g_param_spec_boolean ("show-progress",
P_("Show Dialog"),
P_("TRUE if a progress dialog is shown while printing."),
FALSE,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:allow-async:
*
* Determines whether the print operation may run asynchronously or not.
*
* Some systems don't support asynchronous printing, but those that do
* will return %GTK_PRINT_OPERATION_RESULT_IN_PROGRESS as the status, and
* emit the #GtkPrintOperation::done signal when the operation is actually
* done.
*
* The Windows port does not support asynchronous operation at all (this
* is unlikely to change). On other platforms, all actions except for
* %GTK_PRINT_OPERATION_ACTION_EXPORT support asynchronous operation.
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_ALLOW_ASYNC,
g_param_spec_boolean ("allow-async",
P_("Allow Async"),
P_("TRUE if print process may run asynchronous."),
FALSE,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:export-filename:
*
* The name of a file to generate instead of showing the print dialog.
* Currently, PDF is the only supported format.
*
* The intended use of this property is for implementing
* "Export to PDF" actions.
*
* "Print to PDF" support is independent of this and is done
* by letting the user pick the "Print to PDF" item from the
* list of printers in the print dialog.
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_EXPORT_FILENAME,
g_param_spec_string ("export-filename",
P_("Export filename"),
P_("Export filename"),
NULL,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:status:
*
* The status of the print operation.
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_STATUS,
g_param_spec_enum ("status",
P_("Status"),
P_("The status of the print operation"),
GTK_TYPE_PRINT_STATUS,
GTK_PRINT_STATUS_INITIAL,
GTK_PARAM_READABLE));
/**
* GtkPrintOperation:status-string:
*
* A string representation of the status of the print operation.
* The string is translated and suitable for displaying the print
* status e.g. in a #GtkStatusbar.
*
* See the #GtkPrintOperation:status property for a status value that
* is suitable for programmatic use.
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_STATUS_STRING,
g_param_spec_string ("status-string",
P_("Status String"),
P_("A human-readable description of the status"),
"",
GTK_PARAM_READABLE));
/**
* GtkPrintOperation:custom-tab-label:
*
* Used as the label of the tab containing custom widgets.
* Note that this property may be ignored on some platforms.
*
* If this is %NULL, GTK+ uses a default label.
*
* Since: 2.10
*/
g_object_class_install_property (gobject_class,
PROP_CUSTOM_TAB_LABEL,
g_param_spec_string ("custom-tab-label",
P_("Custom tab label"),
P_("Label for the tab containing custom widgets."),
NULL,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:support-selection:
*
* If %TRUE, the print operation will support print of selection.
* This allows the print dialog to show a "Selection" button.
*
* Since: 2.18
*/
g_object_class_install_property (gobject_class,
PROP_SUPPORT_SELECTION,
g_param_spec_boolean ("support-selection",
P_("Support Selection"),
P_("TRUE if the print operation will support print of selection."),
FALSE,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:has-selection:
*
* Determines whether there is a selection in your application.
* This can allow your application to print the selection.
* This is typically used to make a "Selection" button sensitive.
*
* Since: 2.18
*/
g_object_class_install_property (gobject_class,
PROP_HAS_SELECTION,
g_param_spec_boolean ("has-selection",
P_("Has Selection"),
P_("TRUE if a selection exists."),
FALSE,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:embed-page-setup:
*
* If %TRUE, page size combo box and orientation combo box are embedded into page setup page.
*
* Since: 2.18
*/
g_object_class_install_property (gobject_class,
PROP_EMBED_PAGE_SETUP,
g_param_spec_boolean ("embed-page-setup",
P_("Embed Page Setup"),
P_("TRUE if page setup combos are embedded in GtkPrintDialog"),
FALSE,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:n-pages-to-print:
*
* The number of pages that will be printed.
*
* Note that this value is set during print preparation phase
* (%GTK_PRINT_STATUS_PREPARING), so this value should never be
* get before the data generation phase (%GTK_PRINT_STATUS_GENERATING_DATA).
* You can connect to the #GtkPrintOperation::status-changed signal
* and call gtk_print_operation_get_n_pages_to_print() when
* print status is %GTK_PRINT_STATUS_GENERATING_DATA.
* This is typically used to track the progress of print operation.
*
* Since: 2.18
*/
g_object_class_install_property (gobject_class,
PROP_N_PAGES_TO_PRINT,
g_param_spec_int ("n-pages-to-print",
P_("Number of Pages To Print"),
P_("The number of pages that will be printed."),
-1,
G_MAXINT,
-1,
GTK_PARAM_READABLE));
}
/**
* gtk_print_operation_new:
*
* Creates a new #GtkPrintOperation.
*
* Returns: a new #GtkPrintOperation
*
* Since: 2.10
*/
GtkPrintOperation *
gtk_print_operation_new (void)
{
GtkPrintOperation *print_operation;
print_operation = g_object_new (GTK_TYPE_PRINT_OPERATION, NULL);
return print_operation;
}
/**
* gtk_print_operation_set_default_page_setup:
* @op: a #GtkPrintOperation
* @default_page_setup: (allow-none): a #GtkPageSetup, or %NULL
*
* Makes @default_page_setup the default page setup for @op.
*
* This page setup will be used by gtk_print_operation_run(),
* but it can be overridden on a per-page basis by connecting
* to the #GtkPrintOperation::request-page-setup signal.
*
* Since: 2.10
**/
void
gtk_print_operation_set_default_page_setup (GtkPrintOperation *op,
GtkPageSetup *default_page_setup)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
g_return_if_fail (default_page_setup == NULL ||
GTK_IS_PAGE_SETUP (default_page_setup));
priv = op->priv;
if (default_page_setup != priv->default_page_setup)
{
if (default_page_setup)
g_object_ref (default_page_setup);
if (priv->default_page_setup)
g_object_unref (priv->default_page_setup);
priv->default_page_setup = default_page_setup;
g_object_notify (G_OBJECT (op), "default-page-setup");
}
}
/**
* gtk_print_operation_get_default_page_setup:
* @op: a #GtkPrintOperation
*
* Returns the default page setup, see
* gtk_print_operation_set_default_page_setup().
*
* Returns: (transfer none): the default page setup
*
* Since: 2.10
*/
GtkPageSetup *
gtk_print_operation_get_default_page_setup (GtkPrintOperation *op)
{
g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), NULL);
return op->priv->default_page_setup;
}
/**
* gtk_print_operation_set_print_settings:
* @op: a #GtkPrintOperation
* @print_settings: (allow-none): #GtkPrintSettings
*
* Sets the print settings for @op. This is typically used to
* re-establish print settings from a previous print operation,
* see gtk_print_operation_run().
*
* Since: 2.10
**/
void
gtk_print_operation_set_print_settings (GtkPrintOperation *op,
GtkPrintSettings *print_settings)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
g_return_if_fail (print_settings == NULL ||
GTK_IS_PRINT_SETTINGS (print_settings));
priv = op->priv;
if (print_settings != priv->print_settings)
{
if (print_settings)
g_object_ref (print_settings);
if (priv->print_settings)
g_object_unref (priv->print_settings);
priv->print_settings = print_settings;
g_object_notify (G_OBJECT (op), "print-settings");
}
}
/**
* gtk_print_operation_get_print_settings:
* @op: a #GtkPrintOperation
*
* Returns the current print settings.
*
* Note that the return value is %NULL until either
* gtk_print_operation_set_print_settings() or
* gtk_print_operation_run() have been called.
*
* Return value: (transfer none): the current print settings of @op.
*
* Since: 2.10
**/
GtkPrintSettings *
gtk_print_operation_get_print_settings (GtkPrintOperation *op)
{
g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), NULL);
return op->priv->print_settings;
}
/**
* gtk_print_operation_set_job_name:
* @op: a #GtkPrintOperation
* @job_name: a string that identifies the print job
*
* Sets the name of the print job. The name is used to identify
* the job (e.g. in monitoring applications like eggcups).
*
* If you don't set a job name, GTK+ picks a default one by
* numbering successive print jobs.
*
* Since: 2.10
**/
void
gtk_print_operation_set_job_name (GtkPrintOperation *op,
const gchar *job_name)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
g_return_if_fail (job_name != NULL);
priv = op->priv;
g_free (priv->job_name);
priv->job_name = g_strdup (job_name);
g_object_notify (G_OBJECT (op), "job-name");
}
/**
* gtk_print_operation_set_n_pages:
* @op: a #GtkPrintOperation
* @n_pages: the number of pages
*
* Sets the number of pages in the document.
*
* This <emphasis>must</emphasis> be set to a positive number
* before the rendering starts. It may be set in a
* #GtkPrintOperation::begin-print signal hander.
*
* Note that the page numbers passed to the
* #GtkPrintOperation::request-page-setup
* and #GtkPrintOperation::draw-page signals are 0-based, i.e. if
* the user chooses to print all pages, the last ::draw-page signal
* will be for page @n_pages - 1.
*
* Since: 2.10
**/
void
gtk_print_operation_set_n_pages (GtkPrintOperation *op,
gint n_pages)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
g_return_if_fail (n_pages > 0);
priv = op->priv;
g_return_if_fail (priv->current_page == -1 ||
priv->current_page < n_pages);
if (priv->nr_of_pages != n_pages)
{
priv->nr_of_pages = n_pages;
g_object_notify (G_OBJECT (op), "n-pages");
}
}
/**
* gtk_print_operation_set_current_page:
* @op: a #GtkPrintOperation
* @current_page: the current page, 0-based
*
* Sets the current page.
*
* If this is called before gtk_print_operation_run(),
* the user will be able to select to print only the current page.
*
* Note that this only makes sense for pre-paginated documents.
*
* Since: 2.10
**/
void
gtk_print_operation_set_current_page (GtkPrintOperation *op,
gint current_page)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
g_return_if_fail (current_page >= 0);
priv = op->priv;
g_return_if_fail (priv->nr_of_pages == -1 ||
current_page < priv->nr_of_pages);
if (priv->current_page != current_page)
{
priv->current_page = current_page;
g_object_notify (G_OBJECT (op), "current-page");
}
}
/**
* gtk_print_operation_set_use_full_page:
* @op: a #GtkPrintOperation
* @full_page: %TRUE to set up the #GtkPrintContext for the full page
*
* If @full_page is %TRUE, the transformation for the cairo context
* obtained from #GtkPrintContext puts the origin at the top left
* corner of the page (which may not be the top left corner of the
* sheet, depending on page orientation and the number of pages per
* sheet). Otherwise, the origin is at the top left corner of the
* imageable area (i.e. inside the margins).
*
* Since: 2.10
*/
void
gtk_print_operation_set_use_full_page (GtkPrintOperation *op,
gboolean full_page)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
full_page = full_page != FALSE;
priv = op->priv;
if (priv->use_full_page != full_page)
{
priv->use_full_page = full_page;
g_object_notify (G_OBJECT (op), "use-full-page");
}
}
/**
* gtk_print_operation_set_unit:
* @op: a #GtkPrintOperation
* @unit: the unit to use
*
* Sets up the transformation for the cairo context obtained from
* #GtkPrintContext in such a way that distances are measured in
* units of @unit.
*
* Since: 2.10
*/
void
gtk_print_operation_set_unit (GtkPrintOperation *op,
GtkUnit unit)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
priv = op->priv;
if (priv->unit != unit)
{
priv->unit = unit;
g_object_notify (G_OBJECT (op), "unit");
}
}
/**
* gtk_print_operation_set_track_print_status:
* @op: a #GtkPrintOperation
* @track_status: %TRUE to track status after printing
*
* If track_status is %TRUE, the print operation will try to continue report
* on the status of the print job in the printer queues and printer. This
* can allow your application to show things like "out of paper" issues,
* and when the print job actually reaches the printer.
*
* This function is often implemented using some form of polling, so it should
* not be enabled unless needed.
*
* Since: 2.10
*/
void
gtk_print_operation_set_track_print_status (GtkPrintOperation *op,
gboolean track_status)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
priv = op->priv;
if (priv->track_print_status != track_status)
{
priv->track_print_status = track_status;
g_object_notify (G_OBJECT (op), "track-print-status");
}
}
void
_gtk_print_operation_set_status (GtkPrintOperation *op,
GtkPrintStatus status,
const gchar *string)
{
GtkPrintOperationPrivate *priv = op->priv;
static const gchar *status_strs[] = {
NC_("print operation status", "Initial state"),
NC_("print operation status", "Preparing to print"),
NC_("print operation status", "Generating data"),
NC_("print operation status", "Sending data"),
NC_("print operation status", "Waiting"),
NC_("print operation status", "Blocking on issue"),
NC_("print operation status", "Printing"),
NC_("print operation status", "Finished"),
NC_("print operation status", "Finished with error")
};
if (status < 0 || status > GTK_PRINT_STATUS_FINISHED_ABORTED)
status = GTK_PRINT_STATUS_FINISHED_ABORTED;
if (string == NULL)
string = g_dpgettext2 (GETTEXT_PACKAGE, "print operation status", status_strs[status]);
if (priv->status == status &&
strcmp (string, priv->status_string) == 0)
return;
g_free (priv->status_string);
priv->status_string = g_strdup (string);
priv->status = status;
g_object_notify (G_OBJECT (op), "status");
g_object_notify (G_OBJECT (op), "status-string");
g_signal_emit (op, signals[STATUS_CHANGED], 0);
}
/**
* gtk_print_operation_get_status:
* @op: a #GtkPrintOperation
*
* Returns the status of the print operation.
* Also see gtk_print_operation_get_status_string().
*
* Return value: the status of the print operation
*
* Since: 2.10
**/
GtkPrintStatus
gtk_print_operation_get_status (GtkPrintOperation *op)
{
g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op),
GTK_PRINT_STATUS_FINISHED_ABORTED);
return op->priv->status;
}
/**
* gtk_print_operation_get_status_string:
* @op: a #GtkPrintOperation
*
* Returns a string representation of the status of the
* print operation. The string is translated and suitable
* for displaying the print status e.g. in a #GtkStatusbar.
*
* Use gtk_print_operation_get_status() to obtain a status
* value that is suitable for programmatic use.
*
* Return value: a string representation of the status
* of the print operation
*
* Since: 2.10
**/
const gchar *
gtk_print_operation_get_status_string (GtkPrintOperation *op)
{
g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), "");
return op->priv->status_string;
}
/**
* gtk_print_operation_is_finished:
* @op: a #GtkPrintOperation
*
* A convenience function to find out if the print operation
* is finished, either successfully (%GTK_PRINT_STATUS_FINISHED)
* or unsuccessfully (%GTK_PRINT_STATUS_FINISHED_ABORTED).
*
* Note: when you enable print status tracking the print operation
* can be in a non-finished state even after done has been called, as
* the operation status then tracks the print job status on the printer.
*
* Return value: %TRUE, if the print operation is finished.
*
* Since: 2.10
**/
gboolean
gtk_print_operation_is_finished (GtkPrintOperation *op)
{
GtkPrintOperationPrivate *priv;
g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), TRUE);
priv = op->priv;
return
priv->status == GTK_PRINT_STATUS_FINISHED_ABORTED ||
priv->status == GTK_PRINT_STATUS_FINISHED;
}
/**
* gtk_print_operation_set_show_progress:
* @op: a #GtkPrintOperation
* @show_progress: %TRUE to show a progress dialog
*
* If @show_progress is %TRUE, the print operation will show a
* progress dialog during the print operation.
*
* Since: 2.10
*/
void
gtk_print_operation_set_show_progress (GtkPrintOperation *op,
gboolean show_progress)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
priv = op->priv;
show_progress = show_progress != FALSE;
if (priv->show_progress != show_progress)
{
priv->show_progress = show_progress;
g_object_notify (G_OBJECT (op), "show-progress");
}
}
/**
* gtk_print_operation_set_allow_async:
* @op: a #GtkPrintOperation
* @allow_async: %TRUE to allow asynchronous operation
*
* Sets whether the gtk_print_operation_run() may return
* before the print operation is completed. Note that
* some platforms may not allow asynchronous operation.
*
* Since: 2.10
*/
void
gtk_print_operation_set_allow_async (GtkPrintOperation *op,
gboolean allow_async)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
priv = op->priv;
allow_async = allow_async != FALSE;
if (priv->allow_async != allow_async)
{
priv->allow_async = allow_async;
g_object_notify (G_OBJECT (op), "allow-async");
}
}
/**
* gtk_print_operation_set_custom_tab_label:
* @op: a #GtkPrintOperation
* @label: (allow-none): the label to use, or %NULL to use the default label
*
* Sets the label for the tab holding custom widgets.
*
* Since: 2.10
*/
void
gtk_print_operation_set_custom_tab_label (GtkPrintOperation *op,
const gchar *label)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
priv = op->priv;
g_free (priv->custom_tab_label);
priv->custom_tab_label = g_strdup (label);
g_object_notify (G_OBJECT (op), "custom-tab-label");
}
/**
* gtk_print_operation_set_export_filename:
* @op: a #GtkPrintOperation
* @filename: the filename for the exported file
*
* Sets up the #GtkPrintOperation to generate a file instead
* of showing the print dialog. The indended use of this function
* is for implementing "Export to PDF" actions. Currently, PDF
* is the only supported format.
*
* "Print to PDF" support is independent of this and is done
* by letting the user pick the "Print to PDF" item from the list
* of printers in the print dialog.
*
* Since: 2.10
*/
void
gtk_print_operation_set_export_filename (GtkPrintOperation *op,
const gchar *filename)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
priv = op->priv;
g_free (priv->export_filename);
priv->export_filename = g_strdup (filename);
g_object_notify (G_OBJECT (op), "export-filename");
}
/* Creates the initial page setup used for printing unless the
* app overrides this on a per-page basis using request_page_setup.
*
* Data is taken from, in order, if existing:
*
* PrintSettings returned from the print dialog
* (initial dialog values are set from default_page_setup
* if unset in app specified print_settings)
* default_page_setup
* per-locale default setup
*/
static GtkPageSetup *
create_page_setup (GtkPrintOperation *op)
{
GtkPrintOperationPrivate *priv = op->priv;
GtkPageSetup *page_setup;
GtkPrintSettings *settings;
if (priv->default_page_setup)
page_setup = gtk_page_setup_copy (priv->default_page_setup);
else
page_setup = gtk_page_setup_new ();
settings = priv->print_settings;
if (settings)
{
GtkPaperSize *paper_size;
if (gtk_print_settings_has_key (settings, GTK_PRINT_SETTINGS_ORIENTATION))
gtk_page_setup_set_orientation (page_setup,
gtk_print_settings_get_orientation (settings));
paper_size = gtk_print_settings_get_paper_size (settings);
if (paper_size)
{
gtk_page_setup_set_paper_size (page_setup, paper_size);
gtk_paper_size_free (paper_size);
}
/* TODO: Margins? */
}
return page_setup;
}
static void
pdf_start_page (GtkPrintOperation *op,
GtkPrintContext *print_context,
GtkPageSetup *page_setup)
{
GtkPaperSize *paper_size;
cairo_surface_t *surface = op->priv->platform_data;
gdouble w, h;
paper_size = gtk_page_setup_get_paper_size (page_setup);
w = gtk_paper_size_get_width (paper_size, GTK_UNIT_POINTS);
h = gtk_paper_size_get_height (paper_size, GTK_UNIT_POINTS);
cairo_pdf_surface_set_size (surface, w, h);
}
static void
pdf_end_page (GtkPrintOperation *op,
GtkPrintContext *print_context)
{
cairo_t *cr;
cr = gtk_print_context_get_cairo_context (print_context);
if ((op->priv->manual_number_up < 2) ||
((op->priv->page_position + 1) % op->priv->manual_number_up == 0) ||
(op->priv->page_position == op->priv->nr_of_pages_to_print - 1))
cairo_show_page (cr);
}
static void
pdf_end_run (GtkPrintOperation *op,
gboolean wait,
gboolean cancelled)
{
GtkPrintOperationPrivate *priv = op->priv;
cairo_surface_t *surface = priv->platform_data;
cairo_surface_finish (surface);
cairo_surface_destroy (surface);
priv->platform_data = NULL;
priv->free_platform_data = NULL;
}
static GtkPrintOperationResult
run_pdf (GtkPrintOperation *op,
GtkWindow *parent,
gboolean *do_print)
{
GtkPrintOperationPrivate *priv = op->priv;
GtkPageSetup *page_setup;
cairo_surface_t *surface;
cairo_t *cr;
gdouble width, height;
priv->print_context = _gtk_print_context_new (op);
page_setup = create_page_setup (op);
_gtk_print_context_set_page_setup (priv->print_context, page_setup);
/* This will be overwritten later by the non-default size, but
we need to pass some size: */
width = gtk_page_setup_get_paper_width (page_setup, GTK_UNIT_POINTS);
height = gtk_page_setup_get_paper_height (page_setup, GTK_UNIT_POINTS);
g_object_unref (page_setup);
surface = cairo_pdf_surface_create (priv->export_filename,
width, height);
if (cairo_surface_status (surface) != CAIRO_STATUS_SUCCESS)
{
g_set_error_literal (&priv->error,
GTK_PRINT_ERROR,
GTK_PRINT_ERROR_GENERAL,
cairo_status_to_string (cairo_surface_status (surface)));
*do_print = FALSE;
return GTK_PRINT_OPERATION_RESULT_ERROR;
}
/* this would crash on a nil surface */
cairo_surface_set_fallback_resolution (surface, 300, 300);
priv->platform_data = surface;
priv->free_platform_data = (GDestroyNotify) cairo_surface_destroy;
cr = cairo_create (surface);
gtk_print_context_set_cairo_context (op->priv->print_context,
cr, 72, 72);
cairo_destroy (cr);
priv->print_pages = GTK_PRINT_PAGES_ALL;
priv->page_ranges = NULL;
priv->num_page_ranges = 0;
priv->manual_num_copies = 1;
priv->manual_collation = FALSE;
priv->manual_reverse = FALSE;
priv->manual_page_set = GTK_PAGE_SET_ALL;
priv->manual_scale = 1.0;
priv->manual_orientation = TRUE;
priv->manual_number_up = 1;
priv->manual_number_up_layout = GTK_NUMBER_UP_LAYOUT_LEFT_TO_RIGHT_TOP_TO_BOTTOM;
*do_print = TRUE;
priv->start_page = pdf_start_page;
priv->end_page = pdf_end_page;
priv->end_run = pdf_end_run;
return GTK_PRINT_OPERATION_RESULT_APPLY;
}
static void
clamp_page_ranges (PrintPagesData *data)
{
GtkPrintOperationPrivate *priv;
gint num_of_correct_ranges;
gint i;
priv = data->op->priv;
num_of_correct_ranges = 0;
for (i = 0; i < data->num_ranges; i++)
if ((data->ranges[i].start >= 0) &&
(data->ranges[i].start < priv->nr_of_pages) &&
(data->ranges[i].end >= 0) &&
(data->ranges[i].end < priv->nr_of_pages))
{
data->ranges[num_of_correct_ranges] = data->ranges[i];
num_of_correct_ranges++;
}
else if ((data->ranges[i].start >= 0) &&
(data->ranges[i].start < priv->nr_of_pages) &&
(data->ranges[i].end >= priv->nr_of_pages))
{
data->ranges[i].end = priv->nr_of_pages - 1;
data->ranges[num_of_correct_ranges] = data->ranges[i];
num_of_correct_ranges++;
}
else if ((data->ranges[i].end >= 0) &&
(data->ranges[i].end < priv->nr_of_pages) &&
(data->ranges[i].start < 0))
{
data->ranges[i].start = 0;
data->ranges[num_of_correct_ranges] = data->ranges[i];
num_of_correct_ranges++;
}
data->num_ranges = num_of_correct_ranges;
}
static void
increment_page_sequence (PrintPagesData *data)
{
GtkPrintOperationPrivate *priv = data->op->priv;
gint inc;
if (data->total == -1)
{
data->total = 0;
return;
}
/* check whether we reached last position */
if (priv->page_position == data->last_position &&
!(data->collated_copies > 1 && data->collated < (data->collated_copies - 1)))
{
if (data->uncollated_copies > 1 && data->uncollated < (data->uncollated_copies - 1))
{
priv->page_position = data->first_position;
data->sheet = data->first_sheet;
data->uncollated++;
}
else
{
data->done = TRUE;
return;
}
}
else
{
if (priv->manual_reverse)
inc = -1;
else
inc = 1;
/* changing sheet */
if (priv->manual_number_up < 2 ||
(priv->page_position + 1) % priv->manual_number_up == 0 ||
priv->page_position == data->last_position ||
priv->page_position == priv->nr_of_pages_to_print - 1)
{
/* check whether to print the same sheet again */
if (data->collated_copies > 1)
{
if (data->collated < (data->collated_copies - 1))
{
data->collated++;
data->total++;
priv->page_position = data->sheet * priv->manual_number_up;
if (priv->page_position < 0 ||
priv->page_position >= priv->nr_of_pages_to_print ||
data->sheet < 0 ||
data->sheet >= data->num_of_sheets)
{
data->done = TRUE;
return;
}
else
data->page = data->pages[priv->page_position];
return;
}
else
data->collated = 0;
}
if (priv->manual_page_set == GTK_PAGE_SET_ODD ||
priv->manual_page_set == GTK_PAGE_SET_EVEN)
data->sheet += 2 * inc;
else
data->sheet += inc;
priv->page_position = data->sheet * priv->manual_number_up;
}
else
priv->page_position += 1;
}
/* general check */
if (priv->page_position < 0 ||
priv->page_position >= priv->nr_of_pages_to_print ||
data->sheet < 0 ||
data->sheet >= data->num_of_sheets)
{
data->done = TRUE;
return;
}
else
data->page = data->pages[priv->page_position];
data->total++;
}
static void
print_pages_idle_done (gpointer user_data)
{
PrintPagesData *data;
GtkPrintOperationPrivate *priv;
data = (PrintPagesData*)user_data;
priv = data->op->priv;
priv->print_pages_idle_id = 0;
if (priv->show_progress_timeout_id > 0)
{
g_source_remove (priv->show_progress_timeout_id);
priv->show_progress_timeout_id = 0;
}
if (data->progress)
gtk_widget_destroy (data->progress);
if (priv->rloop && !data->is_preview)
g_main_loop_quit (priv->rloop);
if (!data->is_preview)
g_signal_emit (data->op, signals[DONE], 0,
priv->cancelled ?
GTK_PRINT_OPERATION_RESULT_CANCEL :
GTK_PRINT_OPERATION_RESULT_APPLY);
g_object_unref (data->op);
g_free (data->pages);
g_free (data);
}
static void
update_progress (PrintPagesData *data)
{
GtkPrintOperationPrivate *priv;
gchar *text = NULL;
priv = data->op->priv;
if (data->progress)
{
if (priv->status == GTK_PRINT_STATUS_PREPARING)
{
if (priv->nr_of_pages_to_print > 0)
text = g_strdup_printf (_("Preparing %d"), priv->nr_of_pages_to_print);
else
text = g_strdup (_("Preparing"));
}
else if (priv->status == GTK_PRINT_STATUS_GENERATING_DATA)
text = g_strdup_printf (_("Printing %d"), data->total);
if (text)
{
g_object_set (data->progress, "text", text, NULL);
g_free (text);
}
}
}
/**
* gtk_print_operation_set_defer_drawing:
* @op: a #GtkPrintOperation
*
* Sets up the #GtkPrintOperation to wait for calling of
* gtk_print_operation_draw_page_finish() from application. It can
* be used for drawing page in another thread.
*
* This function must be called in the callback of "draw-page" signal.
*
* Since: 2.16
**/
void
gtk_print_operation_set_defer_drawing (GtkPrintOperation *op)
{
GtkPrintOperationPrivate *priv = op->priv;
g_return_if_fail (priv->page_drawing_state == GTK_PAGE_DRAWING_STATE_DRAWING);
priv->page_drawing_state = GTK_PAGE_DRAWING_STATE_DEFERRED_DRAWING;
}
/**
* gtk_print_operation_set_embed_page_setup:
* @op: a #GtkPrintOperation
* @embed: %TRUE to embed page setup selection in the #GtkPrintDialog
*
* Embed page size combo box and orientation combo box into page setup page.
* Selected page setup is stored as default page setup in #GtkPrintOperation.
*
* Since: 2.18
**/
void
gtk_print_operation_set_embed_page_setup (GtkPrintOperation *op,
gboolean embed)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
priv = op->priv;
embed = embed != FALSE;
if (priv->embed_page_setup != embed)
{
priv->embed_page_setup = embed;
g_object_notify (G_OBJECT (op), "embed-page-setup");
}
}
/**
* gtk_print_operation_get_embed_page_setup:
* @op: a #GtkPrintOperation
*
* Gets the value of #GtkPrintOperation::embed-page-setup property.
*
* Returns: whether page setup selection combos are embedded
*
* Since: 2.18
*/
gboolean
gtk_print_operation_get_embed_page_setup (GtkPrintOperation *op)
{
g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), FALSE);
return op->priv->embed_page_setup;
}
/**
* gtk_print_operation_draw_page_finish:
* @op: a #GtkPrintOperation
*
* Signalize that drawing of particular page is complete.
*
* It is called after completion of page drawing (e.g. drawing in another
* thread).
* If gtk_print_operation_set_defer_drawing() was called before, then this function
* has to be called by application. In another case it is called by the library
* itself.
*
* Since: 2.16
**/
void
gtk_print_operation_draw_page_finish (GtkPrintOperation *op)
{
GtkPrintOperationPrivate *priv = op->priv;
GtkPageSetup *page_setup;
GtkPrintContext *print_context;
cairo_t *cr;
print_context = priv->print_context;
page_setup = gtk_print_context_get_page_setup (print_context);
cr = gtk_print_context_get_cairo_context (print_context);
priv->end_page (op, print_context);
cairo_restore (cr);
g_object_unref (page_setup);
priv->page_drawing_state = GTK_PAGE_DRAWING_STATE_READY;
}
static void
common_render_page (GtkPrintOperation *op,
gint page_nr)
{
GtkPrintOperationPrivate *priv = op->priv;
GtkPageSetup *page_setup;
GtkPrintContext *print_context;
cairo_t *cr;
print_context = priv->print_context;
page_setup = create_page_setup (op);
g_signal_emit (op, signals[REQUEST_PAGE_SETUP], 0,
print_context, page_nr, page_setup);
_gtk_print_context_set_page_setup (print_context, page_setup);
priv->start_page (op, print_context, page_setup);
cr = gtk_print_context_get_cairo_context (print_context);
cairo_save (cr);
if (priv->manual_scale != 1.0 && priv->manual_number_up <= 1)
cairo_scale (cr,
priv->manual_scale,
priv->manual_scale);
if (priv->manual_orientation)
_gtk_print_context_rotate_according_to_orientation (print_context);
if (priv->manual_number_up > 1)
{
GtkPageOrientation orientation;
GtkPageSetup *page_setup;
gdouble paper_width, paper_height;
gdouble page_width, page_height;
gdouble context_width, context_height;
gdouble bottom_margin, top_margin, left_margin, right_margin;
gdouble x_step, y_step;
gdouble x_scale, y_scale, scale;
gdouble horizontal_offset = 0.0, vertical_offset = 0.0;
gint columns, rows, x, y, tmp_length;
page_setup = gtk_print_context_get_page_setup (print_context);
orientation = gtk_page_setup_get_orientation (page_setup);
top_margin = gtk_page_setup_get_top_margin (page_setup, GTK_UNIT_POINTS);
bottom_margin = gtk_page_setup_get_bottom_margin (page_setup, GTK_UNIT_POINTS);
left_margin = gtk_page_setup_get_left_margin (page_setup, GTK_UNIT_POINTS);
right_margin = gtk_page_setup_get_right_margin (page_setup, GTK_UNIT_POINTS);
paper_width = gtk_page_setup_get_paper_width (page_setup, GTK_UNIT_POINTS);
paper_height = gtk_page_setup_get_paper_height (page_setup, GTK_UNIT_POINTS);
context_width = gtk_print_context_get_width (print_context);
context_height = gtk_print_context_get_height (print_context);
if (orientation == GTK_PAGE_ORIENTATION_PORTRAIT ||
orientation == GTK_PAGE_ORIENTATION_REVERSE_PORTRAIT)
{
page_width = paper_width - (left_margin + right_margin);
page_height = paper_height - (top_margin + bottom_margin);
}
else
{
page_width = paper_width - (top_margin + bottom_margin);
page_height = paper_height - (left_margin + right_margin);
}
if (orientation == GTK_PAGE_ORIENTATION_PORTRAIT ||
orientation == GTK_PAGE_ORIENTATION_REVERSE_PORTRAIT)
cairo_translate (cr, left_margin, top_margin);
else
cairo_translate (cr, top_margin, left_margin);
switch (priv->manual_number_up)
{
default:
columns = 1;
rows = 1;
break;
case 2:
columns = 2;
rows = 1;
break;
case 4:
columns = 2;
rows = 2;
break;
case 6:
columns = 3;
rows = 2;
break;
case 9:
columns = 3;
rows = 3;
break;
case 16:
columns = 4;
rows = 4;
break;
}
if (orientation == GTK_PAGE_ORIENTATION_LANDSCAPE ||
orientation == GTK_PAGE_ORIENTATION_REVERSE_LANDSCAPE)
{
tmp_length = columns;
columns = rows;
rows = tmp_length;
}
switch (priv->manual_number_up_layout)
{
case GTK_NUMBER_UP_LAYOUT_LEFT_TO_RIGHT_TOP_TO_BOTTOM:
x = priv->page_position % columns;
y = (priv->page_position / columns) % rows;
break;
case GTK_NUMBER_UP_LAYOUT_LEFT_TO_RIGHT_BOTTOM_TO_TOP:
x = priv->page_position % columns;
y = rows - 1 - (priv->page_position / columns) % rows;
break;
case GTK_NUMBER_UP_LAYOUT_RIGHT_TO_LEFT_TOP_TO_BOTTOM:
x = columns - 1 - priv->page_position % columns;
y = (priv->page_position / columns) % rows;
break;
case GTK_NUMBER_UP_LAYOUT_RIGHT_TO_LEFT_BOTTOM_TO_TOP:
x = columns - 1 - priv->page_position % columns;
y = rows - 1 - (priv->page_position / columns) % rows;
break;
case GTK_NUMBER_UP_LAYOUT_TOP_TO_BOTTOM_LEFT_TO_RIGHT:
x = (priv->page_position / rows) % columns;
y = priv->page_position % rows;
break;
case GTK_NUMBER_UP_LAYOUT_TOP_TO_BOTTOM_RIGHT_TO_LEFT:
x = columns - 1 - (priv->page_position / rows) % columns;
y = priv->page_position % rows;
break;
case GTK_NUMBER_UP_LAYOUT_BOTTOM_TO_TOP_LEFT_TO_RIGHT:
x = (priv->page_position / rows) % columns;
y = rows - 1 - priv->page_position % rows;
break;
case GTK_NUMBER_UP_LAYOUT_BOTTOM_TO_TOP_RIGHT_TO_LEFT:
x = columns - 1 - (priv->page_position / rows) % columns;
y = rows - 1 - priv->page_position % rows;
break;
default:
g_assert_not_reached();
x = 0;
y = 0;
}
if (priv->manual_number_up == 4 || priv->manual_number_up == 9 || priv->manual_number_up == 16)
{
x_scale = page_width / (columns * paper_width);
y_scale = page_height / (rows * paper_height);
scale = x_scale < y_scale ? x_scale : y_scale;
x_step = paper_width * (x_scale / scale);
y_step = paper_height * (y_scale / scale);
if ((left_margin + right_margin) > 0)
{
horizontal_offset = left_margin * (x_step - context_width) / (left_margin + right_margin);
vertical_offset = top_margin * (y_step - context_height) / (top_margin + bottom_margin);
}
else
{
horizontal_offset = (x_step - context_width) / 2.0;
vertical_offset = (y_step - context_height) / 2.0;
}
cairo_scale (cr, scale, scale);
cairo_translate (cr,
x * x_step + horizontal_offset,
y * y_step + vertical_offset);
if (priv->manual_scale != 1.0)
cairo_scale (cr, priv->manual_scale, priv->manual_scale);
}
if (priv->manual_number_up == 2 || priv->manual_number_up == 6)
{
x_scale = page_height / (columns * paper_width);
y_scale = page_width / (rows * paper_height);
scale = x_scale < y_scale ? x_scale : y_scale;
horizontal_offset = (paper_width * (x_scale / scale) - paper_width) / 2.0 * columns;
vertical_offset = (paper_height * (y_scale / scale) - paper_height) / 2.0 * rows;
if (!priv->use_full_page)
{
horizontal_offset -= right_margin;
vertical_offset += top_margin;
}
cairo_scale (cr, scale, scale);
cairo_translate (cr,
y * paper_height + vertical_offset,
(columns - x) * paper_width + horizontal_offset);
if (priv->manual_scale != 1.0)
cairo_scale (cr, priv->manual_scale, priv->manual_scale);
cairo_rotate (cr, - G_PI / 2);
}
}
else
if (!priv->use_full_page)
_gtk_print_context_translate_into_margin (print_context);
priv->page_drawing_state = GTK_PAGE_DRAWING_STATE_DRAWING;
g_signal_emit (op, signals[DRAW_PAGE], 0,
print_context, page_nr);
if (priv->page_drawing_state == GTK_PAGE_DRAWING_STATE_DRAWING)
gtk_print_operation_draw_page_finish (op);
}
static void
prepare_data (PrintPagesData *data)
{
GtkPrintOperationPrivate *priv;
GtkPageSetup *page_setup;
gboolean paginated = FALSE;
gint i, j, counter;
priv = data->op->priv;
if (priv->manual_collation)
{
data->uncollated_copies = priv->manual_num_copies;
data->collated_copies = 1;
}
else
{
data->uncollated_copies = 1;
data->collated_copies = priv->manual_num_copies;
}
if (!data->initialized)
{
data->initialized = TRUE;
page_setup = create_page_setup (data->op);
_gtk_print_context_set_page_setup (priv->print_context,
page_setup);
g_object_unref (page_setup);
g_signal_emit (data->op, signals[BEGIN_PRINT], 0, priv->print_context);
return;
}
g_signal_emit (data->op, signals[PAGINATE], 0, priv->print_context, &paginated);
if (!paginated)
return;
/* Initialize parts of PrintPagesData that depend on nr_of_pages
*/
if (priv->print_pages == GTK_PRINT_PAGES_RANGES)
{
if (priv->page_ranges == NULL)
{
g_warning ("no pages to print");
priv->cancelled = TRUE;
return;
}
data->ranges = priv->page_ranges;
data->num_ranges = priv->num_page_ranges;
for (i = 0; i < data->num_ranges; i++)
if (data->ranges[i].end == -1 ||
data->ranges[i].end >= priv->nr_of_pages)
data->ranges[i].end = priv->nr_of_pages - 1;
}
else if (priv->print_pages == GTK_PRINT_PAGES_CURRENT &&
priv->current_page != -1)
{
data->ranges = &data->one_range;
data->num_ranges = 1;
data->ranges[0].start = priv->current_page;
data->ranges[0].end = priv->current_page;
}
else
{
data->ranges = &data->one_range;
data->num_ranges = 1;
data->ranges[0].start = 0;
data->ranges[0].end = priv->nr_of_pages - 1;
}
clamp_page_ranges (data);
if (data->num_ranges < 1)
{
priv->cancelled = TRUE;
return;
}
priv->nr_of_pages_to_print = 0;
for (i = 0; i < data->num_ranges; i++)
priv->nr_of_pages_to_print += data->ranges[i].end - data->ranges[i].start + 1;
data->pages = g_new (gint, priv->nr_of_pages_to_print);
counter = 0;
for (i = 0; i < data->num_ranges; i++)
for (j = data->ranges[i].start; j <= data->ranges[i].end; j++)
{
data->pages[counter] = j;
counter++;
}
data->total = -1;
data->collated = 0;
data->uncollated = 0;
if (priv->manual_number_up > 1)
{
if (priv->nr_of_pages_to_print % priv->manual_number_up == 0)
data->num_of_sheets = priv->nr_of_pages_to_print / priv->manual_number_up;
else
data->num_of_sheets = priv->nr_of_pages_to_print / priv->manual_number_up + 1;
}
else
data->num_of_sheets = priv->nr_of_pages_to_print;
if (priv->manual_reverse)
{
/* data->sheet is 0-based */
if (priv->manual_page_set == GTK_PAGE_SET_ODD)
data->sheet = (data->num_of_sheets - 1) - (data->num_of_sheets - 1) % 2;
else if (priv->manual_page_set == GTK_PAGE_SET_EVEN)
data->sheet = (data->num_of_sheets - 1) - (1 - (data->num_of_sheets - 1) % 2);
else
data->sheet = data->num_of_sheets - 1;
}
else
{
/* data->sheet is 0-based */
if (priv->manual_page_set == GTK_PAGE_SET_ODD)
data->sheet = 0;
else if (priv->manual_page_set == GTK_PAGE_SET_EVEN)
{
if (data->num_of_sheets > 1)
data->sheet = 1;
else
data->sheet = -1;
}
else
data->sheet = 0;
}
priv->page_position = data->sheet * priv->manual_number_up;
if (priv->page_position < 0 || priv->page_position >= priv->nr_of_pages_to_print)
{
priv->cancelled = TRUE;
return;
}
data->page = data->pages[priv->page_position];
data->first_position = priv->page_position;
data->first_sheet = data->sheet;
if (priv->manual_reverse)
{
if (priv->manual_page_set == GTK_PAGE_SET_ODD)
data->last_position = MIN (priv->manual_number_up - 1, priv->nr_of_pages_to_print - 1);
else if (priv->manual_page_set == GTK_PAGE_SET_EVEN)
data->last_position = MIN (2 * priv->manual_number_up - 1, priv->nr_of_pages_to_print - 1);
else
data->last_position = MIN (priv->manual_number_up - 1, priv->nr_of_pages_to_print - 1);
}
else
{
if (priv->manual_page_set == GTK_PAGE_SET_ODD)
data->last_position = MIN (((data->num_of_sheets - 1) - ((data->num_of_sheets - 1) % 2)) * priv->manual_number_up - 1, priv->nr_of_pages_to_print - 1);
else if (priv->manual_page_set == GTK_PAGE_SET_EVEN)
data->last_position = MIN (((data->num_of_sheets - 1) - (1 - (data->num_of_sheets - 1) % 2)) * priv->manual_number_up - 1, priv->nr_of_pages_to_print - 1);
else
data->last_position = priv->nr_of_pages_to_print - 1;
}
_gtk_print_operation_set_status (data->op,
GTK_PRINT_STATUS_GENERATING_DATA,
NULL);
}
static gboolean
print_pages_idle (gpointer user_data)
{
PrintPagesData *data;
GtkPrintOperationPrivate *priv;
gboolean done = FALSE;
data = (PrintPagesData*)user_data;
priv = data->op->priv;
if (priv->page_drawing_state == GTK_PAGE_DRAWING_STATE_READY)
{
if (priv->status == GTK_PRINT_STATUS_PREPARING)
{
prepare_data (data);
goto out;
}
if (data->is_preview && !priv->cancelled)
{
done = TRUE;
g_signal_emit_by_name (data->op, "ready", priv->print_context);
goto out;
}
increment_page_sequence (data);
if (!data->done)
common_render_page (data->op, data->page);
else
done = priv->page_drawing_state == GTK_PAGE_DRAWING_STATE_READY;
out:
if (priv->cancelled)
{
_gtk_print_operation_set_status (data->op, GTK_PRINT_STATUS_FINISHED_ABORTED, NULL);
data->is_preview = FALSE;
done = TRUE;
}
if (done && !data->is_preview)
{
g_signal_emit (data->op, signals[END_PRINT], 0, priv->print_context);
priv->end_run (data->op, priv->is_sync, priv->cancelled);
}
update_progress (data);
}
return !done;
}
static void
handle_progress_response (GtkWidget *dialog,
gint response,
gpointer data)
{
GtkPrintOperation *op = (GtkPrintOperation *)data;
gtk_widget_hide (dialog);
gtk_print_operation_cancel (op);
}
static gboolean
show_progress_timeout (PrintPagesData *data)
{
gtk_window_present (GTK_WINDOW (data->progress));
data->op->priv->show_progress_timeout_id = 0;
return FALSE;
}
static void
print_pages (GtkPrintOperation *op,
GtkWindow *parent,
gboolean do_print,
GtkPrintOperationResult result)
{
GtkPrintOperationPrivate *priv = op->priv;
PrintPagesData *data;
if (!do_print)
{
_gtk_print_operation_set_status (op, GTK_PRINT_STATUS_FINISHED_ABORTED, NULL);
g_signal_emit (op, signals[DONE], 0, result);
return;
}
_gtk_print_operation_set_status (op, GTK_PRINT_STATUS_PREPARING, NULL);
data = g_new0 (PrintPagesData, 1);
data->op = g_object_ref (op);
data->is_preview = (priv->action == GTK_PRINT_OPERATION_ACTION_PREVIEW);
if (priv->show_progress)
{
GtkWidget *progress;
progress = gtk_message_dialog_new (parent, 0,
GTK_MESSAGE_OTHER,
GTK_BUTTONS_CANCEL,
_("Preparing"));
g_signal_connect (progress, "response",
G_CALLBACK (handle_progress_response), op);
priv->show_progress_timeout_id =
gdk_threads_add_timeout (SHOW_PROGRESS_TIME,
(GSourceFunc)show_progress_timeout,
data);
data->progress = progress;
}
if (data->is_preview)
{
gboolean handled;
g_signal_emit_by_name (op, "preview",
GTK_PRINT_OPERATION_PREVIEW (op),
priv->print_context,
parent,
&handled);
if (!handled)
{
GtkWidget *error_dialog;
error_dialog = gtk_message_dialog_new (parent,
GTK_DIALOG_MODAL | GTK_DIALOG_DESTROY_WITH_PARENT,
GTK_MESSAGE_ERROR,
GTK_BUTTONS_OK,
_("Error creating print preview"));
gtk_message_dialog_format_secondary_text (GTK_MESSAGE_DIALOG (error_dialog),
_("The most probable reason is that a temporary file could not be created."));
if (parent && parent->group)
gtk_window_group_add_window (parent->group, GTK_WINDOW (error_dialog));
g_signal_connect (error_dialog, "response",
G_CALLBACK (gtk_widget_destroy), NULL);
gtk_widget_show (error_dialog);
print_pages_idle_done (data);
return;
}
if (gtk_print_context_get_cairo_context (priv->print_context) == NULL)
{
/* Programmer error */
g_error ("You must set a cairo context on the print context");
}
priv->start_page = preview_start_page;
priv->end_page = preview_end_page;
priv->end_run = preview_end_run;
priv->print_pages = gtk_print_settings_get_print_pages (priv->print_settings);
priv->page_ranges = gtk_print_settings_get_page_ranges (priv->print_settings,
&priv->num_page_ranges);
priv->manual_num_copies = 1;
priv->manual_collation = FALSE;
priv->manual_reverse = gtk_print_settings_get_reverse (priv->print_settings);
priv->manual_page_set = gtk_print_settings_get_page_set (priv->print_settings);
priv->manual_scale = gtk_print_settings_get_scale (priv->print_settings) / 100.0;
priv->manual_orientation = TRUE;
priv->manual_number_up = gtk_print_settings_get_number_up (priv->print_settings);
priv->manual_number_up_layout = gtk_print_settings_get_number_up_layout (priv->print_settings);
}
priv->print_pages_idle_id = gdk_threads_add_idle_full (G_PRIORITY_DEFAULT_IDLE + 10,
print_pages_idle,
data,
print_pages_idle_done);
/* Recursive main loop to make sure we don't exit on sync operations */
if (priv->is_sync)
{
priv->rloop = g_main_loop_new (NULL, FALSE);
g_object_ref (op);
GDK_THREADS_LEAVE ();
g_main_loop_run (priv->rloop);
GDK_THREADS_ENTER ();
g_main_loop_unref (priv->rloop);
priv->rloop = NULL;
g_object_unref (op);
}
}
/**
* gtk_print_operation_get_error:
* @op: a #GtkPrintOperation
* @error: return location for the error
*
* Call this when the result of a print operation is
* %GTK_PRINT_OPERATION_RESULT_ERROR, either as returned by
* gtk_print_operation_run(), or in the #GtkPrintOperation::done signal
* handler. The returned #GError will contain more details on what went wrong.
*
* Since: 2.10
**/
void
gtk_print_operation_get_error (GtkPrintOperation *op,
GError **error)
{
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
g_propagate_error (error, op->priv->error);
op->priv->error = NULL;
}
/**
* gtk_print_operation_run:
* @op: a #GtkPrintOperation
* @action: the action to start
* @parent: (allow-none): Transient parent of the dialog
* @error: (allow-none): Return location for errors, or %NULL
*
* Runs the print operation, by first letting the user modify
* print settings in the print dialog, and then print the document.
*
* Normally that this function does not return until the rendering of all
* pages is complete. You can connect to the
* #GtkPrintOperation::status-changed signal on @op to obtain some
* information about the progress of the print operation.
* Furthermore, it may use a recursive mainloop to show the print dialog.
*
* If you call gtk_print_operation_set_allow_async() or set the
* #GtkPrintOperation:allow-async property the operation will run
* asynchronously if this is supported on the platform. The
* #GtkPrintOperation::done signal will be emitted with the result of the
* operation when the it is done (i.e. when the dialog is canceled, or when
* the print succeeds or fails).
* |[
* if (settings != NULL)
* gtk_print_operation_set_print_settings (print, settings);
*
* if (page_setup != NULL)
* gtk_print_operation_set_default_page_setup (print, page_setup);
*
* g_signal_connect (print, "begin-print",
* G_CALLBACK (begin_print), &data);
* g_signal_connect (print, "draw-page",
* G_CALLBACK (draw_page), &data);
*
* res = gtk_print_operation_run (print,
* GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG,
* parent,
* &error);
*
* if (res == GTK_PRINT_OPERATION_RESULT_ERROR)
* {
* error_dialog = gtk_message_dialog_new (GTK_WINDOW (parent),
* GTK_DIALOG_DESTROY_WITH_PARENT,
* GTK_MESSAGE_ERROR,
* GTK_BUTTONS_CLOSE,
* "Error printing file:\n%s",
* error->message);
* g_signal_connect (error_dialog, "response",
* G_CALLBACK (gtk_widget_destroy), NULL);
* gtk_widget_show (error_dialog);
* g_error_free (error);
* }
* else if (res == GTK_PRINT_OPERATION_RESULT_APPLY)
* {
* if (settings != NULL)
* g_object_unref (settings);
* settings = g_object_ref (gtk_print_operation_get_print_settings (print));
* }
* ]|
*
* Note that gtk_print_operation_run() can only be called once on a
* given #GtkPrintOperation.
*
* Return value: the result of the print operation. A return value of
* %GTK_PRINT_OPERATION_RESULT_APPLY indicates that the printing was
* completed successfully. In this case, it is a good idea to obtain
* the used print settings with gtk_print_operation_get_print_settings()
* and store them for reuse with the next print operation. A value of
* %GTK_PRINT_OPERATION_RESULT_IN_PROGRESS means the operation is running
* asynchronously, and will emit the #GtkPrintOperation::done signal when
* done.
*
* Since: 2.10
**/
GtkPrintOperationResult
gtk_print_operation_run (GtkPrintOperation *op,
GtkPrintOperationAction action,
GtkWindow *parent,
GError **error)
{
GtkPrintOperationPrivate *priv;
GtkPrintOperationResult result;
GtkPageSetup *page_setup;
gboolean do_print;
gboolean run_print_pages;
g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op),
GTK_PRINT_OPERATION_RESULT_ERROR);
g_return_val_if_fail (op->priv->status == GTK_PRINT_STATUS_INITIAL,
GTK_PRINT_OPERATION_RESULT_ERROR);
priv = op->priv;
run_print_pages = TRUE;
do_print = FALSE;
priv->error = NULL;
priv->action = action;
if (priv->print_settings == NULL)
priv->print_settings = gtk_print_settings_new ();
if (action == GTK_PRINT_OPERATION_ACTION_EXPORT)
{
/* note: if you implement async EXPORT, update the docs
* docs for the allow-async property.
*/
priv->is_sync = TRUE;
g_return_val_if_fail (priv->export_filename != NULL, GTK_PRINT_OPERATION_RESULT_ERROR);
result = run_pdf (op, parent, &do_print);
}
else if (action == GTK_PRINT_OPERATION_ACTION_PREVIEW)
{
priv->is_sync = !priv->allow_async;
priv->print_context = _gtk_print_context_new (op);
page_setup = create_page_setup (op);
_gtk_print_context_set_page_setup (priv->print_context, page_setup);
g_object_unref (page_setup);
do_print = TRUE;
result = priv->is_sync ? GTK_PRINT_OPERATION_RESULT_APPLY : GTK_PRINT_OPERATION_RESULT_IN_PROGRESS;
}
#ifndef G_OS_WIN32
else if (priv->allow_async)
{
priv->is_sync = FALSE;
_gtk_print_operation_platform_backend_run_dialog_async (op,
action == GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG,
parent,
print_pages);
result = GTK_PRINT_OPERATION_RESULT_IN_PROGRESS;
run_print_pages = FALSE; /* print_pages is called asynchronously from dialog */
}
#endif
else
{
priv->is_sync = TRUE;
result = _gtk_print_operation_platform_backend_run_dialog (op,
action == GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG,
parent,
&do_print);
}
if (run_print_pages)
print_pages (op, parent, do_print, result);
if (priv->error && error)
*error = g_error_copy (priv->error);
return result;
}
/**
* gtk_print_operation_cancel:
* @op: a #GtkPrintOperation
*
* Cancels a running print operation. This function may
* be called from a #GtkPrintOperation::begin-print,
* #GtkPrintOperation::paginate or #GtkPrintOperation::draw-page
* signal handler to stop the currently running print
* operation.
*
* Since: 2.10
*/
void
gtk_print_operation_cancel (GtkPrintOperation *op)
{
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
op->priv->cancelled = TRUE;
}
/**
* gtk_print_operation_set_support_selection:
* @op: a #GtkPrintOperation
* @support_selection: %TRUE to support selection
*
* Sets whether selection is supported by #GtkPrintOperation.
*
* Since: 2.18
*/
void
gtk_print_operation_set_support_selection (GtkPrintOperation *op,
gboolean support_selection)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
priv = op->priv;
support_selection = support_selection != FALSE;
if (priv->support_selection != support_selection)
{
priv->support_selection = support_selection;
g_object_notify (G_OBJECT (op), "support-selection");
}
}
/**
* gtk_print_operation_get_support_selection:
* @op: a #GtkPrintOperation
*
* Gets the value of #GtkPrintOperation::support-selection property.
*
* Returns: whether the application supports print of selection
*
* Since: 2.18
*/
gboolean
gtk_print_operation_get_support_selection (GtkPrintOperation *op)
{
g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), FALSE);
return op->priv->support_selection;
}
/**
* gtk_print_operation_set_has_selection:
* @op: a #GtkPrintOperation
* @has_selection: %TRUE indicates that a selection exists
*
* Sets whether there is a selection to print.
*
* Application has to set number of pages to which the selection
* will draw by gtk_print_operation_set_n_pages() in a callback of
* #GtkPrintOperation::begin-print.
*
* Since: 2.18
*/
void
gtk_print_operation_set_has_selection (GtkPrintOperation *op,
gboolean has_selection)
{
GtkPrintOperationPrivate *priv;
g_return_if_fail (GTK_IS_PRINT_OPERATION (op));
priv = op->priv;
has_selection = has_selection != FALSE;
if (priv->has_selection != has_selection)
{
priv->has_selection = has_selection;
g_object_notify (G_OBJECT (op), "has-selection");
}
}
/**
* gtk_print_operation_get_has_selection:
* @op: a #GtkPrintOperation
*
* Gets the value of #GtkPrintOperation::has-selection property.
*
* Returns: whether there is a selection
*
* Since: 2.18
*/
gboolean
gtk_print_operation_get_has_selection (GtkPrintOperation *op)
{
g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), FALSE);
return op->priv->has_selection;
}
/**
* gtk_print_operation_get_n_pages_to_print:
* @op: a #GtkPrintOperation
*
* Returns the number of pages that will be printed.
*
* Note that this value is set during print preparation phase
* (%GTK_PRINT_STATUS_PREPARING), so this function should never be
* called before the data generation phase (%GTK_PRINT_STATUS_GENERATING_DATA).
* You can connect to the #GtkPrintOperation::status-changed signal
* and call gtk_print_operation_get_n_pages_to_print() when
* print status is %GTK_PRINT_STATUS_GENERATING_DATA.
* This is typically used to track the progress of print operation.
*
* Returns: the number of pages that will be printed
*
* Since: 2.18
**/
gint
gtk_print_operation_get_n_pages_to_print (GtkPrintOperation *op)
{
g_return_val_if_fail (GTK_IS_PRINT_OPERATION (op), -1);
return op->priv->nr_of_pages_to_print;
}
#define __GTK_PRINT_OPERATION_C__
#include "gtkaliasdef.c"