# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# -*- mode: makefile -*-
#
# gtk-doc.make - make rules for gtk-doc
# Copyright (C) 2003 James Henstridge
# 2004-2007 Damon Chaplin
# 2007-2017 Stefan Sauer
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
####################################
# Everything below here is generic #
####################################
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@ENABLE_DOCUMENTATION_TRUE@am__append_1 = \
@ENABLE_DOCUMENTATION_TRUE@ goa-daemon.8 \
@ENABLE_DOCUMENTATION_TRUE@ $(NULL)
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_append_compile_flags.m4 \
$(top_srcdir)/m4/ax_append_flag.m4 \
$(top_srcdir)/m4/ax_append_link_flags.m4 \
$(top_srcdir)/m4/ax_check_compile_flag.m4 \
$(top_srcdir)/m4/ax_check_enable_debug.m4 \
$(top_srcdir)/m4/ax_check_link_flag.m4 \
$(top_srcdir)/m4/ax_compiler_flags.m4 \
$(top_srcdir)/m4/ax_compiler_flags_cflags.m4 \
$(top_srcdir)/m4/ax_compiler_flags_gir.m4 \
$(top_srcdir)/m4/ax_compiler_flags_ldflags.m4 \
$(top_srcdir)/m4/ax_config_dir.m4 \
$(top_srcdir)/m4/ax_is_release.m4 \
$(top_srcdir)/m4/ax_require_defined.m4 \
$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gsettings.m4 \
$(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/iconv.m4 \
$(top_srcdir)/m4/intlmacosx.m4 \
$(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \
$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
$(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \
$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/vapigen.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = version.xml
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
man8dir = $(mandir)/man8
am__installdirs = "$(DESTDIR)$(man8dir)"
NROFF = nroff
MANS = $(man_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
distdir
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/version.xml.in \
$(top_srcdir)/gtk-doc.make
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GCR_CFLAGS = @GCR_CFLAGS@
GCR_LIBS = @GCR_LIBS@
GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_COMPILE_SCHEMAS = @GLIB_COMPILE_SCHEMAS@
GLIB_LIBS = @GLIB_LIBS@
GMSGFMT = @GMSGFMT@
GMSGFMT_015 = @GMSGFMT_015@
GOA_BACKEND_LT_VERSION = @GOA_BACKEND_LT_VERSION@
GOA_LT_VERSION = @GOA_LT_VERSION@
GOA_MAJOR_VERSION = @GOA_MAJOR_VERSION@
GOA_MICRO_VERSION = @GOA_MICRO_VERSION@
GOA_MINOR_VERSION = @GOA_MINOR_VERSION@
GREP = @GREP@
GSETTINGS_DISABLE_SCHEMAS_COMPILE = @GSETTINGS_DISABLE_SCHEMAS_COMPILE@
GTKDOC_CHECK = @GTKDOC_CHECK@
GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@
GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@
GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@
GTKDOC_MKPDF = @GTKDOC_MKPDF@
GTKDOC_REBASE = @GTKDOC_REBASE@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_LIBS = @GTK_LIBS@
HTML_DIR = @HTML_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@
INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@
INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@
INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@
INTROSPECTION_LIBS = @INTROSPECTION_LIBS@
INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@
INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@
INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@
JSON_GLIB_CFLAGS = @JSON_GLIB_CFLAGS@
JSON_GLIB_LIBS = @JSON_GLIB_LIBS@
KRB5_CFLAGS = @KRB5_CFLAGS@
KRB5_CONFIG = @KRB5_CONFIG@
KRB5_LIBS = @KRB5_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSOUP_CFLAGS = @LIBSOUP_CFLAGS@
LIBSOUP_LIBS = @LIBSOUP_LIBS@
LIBTOOL = @LIBTOOL@
LIBXML_CFLAGS = @LIBXML_CFLAGS@
LIBXML_LIBS = @LIBXML_LIBS@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGFMT_015 = @MSGFMT_015@
MSGMERGE = @MSGMERGE@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
POSUB = @POSUB@
RANLIB = @RANLIB@
REST_CFLAGS = @REST_CFLAGS@
REST_LIBS = @REST_LIBS@
SECRET_CFLAGS = @SECRET_CFLAGS@
SECRET_LIBS = @SECRET_LIBS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TPAW_CFLAGS = @TPAW_CFLAGS@
TPAW_LIBS = @TPAW_LIBS@
TP_CFLAGS = @TP_CFLAGS@
TP_LIBS = @TP_LIBS@
USE_NLS = @USE_NLS@
VAPIGEN = @VAPIGEN@
VAPIGEN_MAKEFILE = @VAPIGEN_MAKEFILE@
VAPIGEN_VAPIDIR = @VAPIGEN_VAPIDIR@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
WARN_LDFLAGS = @WARN_LDFLAGS@
WARN_SCANNERFLAGS = @WARN_SCANNERFLAGS@
WEBKIT_GTK_CFLAGS = @WEBKIT_GTK_CFLAGS@
WEBKIT_GTK_LIBS = @WEBKIT_GTK_LIBS@
XGETTEXT = @XGETTEXT@
XGETTEXT_015 = @XGETTEXT_015@
XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
XSLTPROC = @XSLTPROC@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gsettingsschemadir = @gsettingsschemadir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
NULL =
SUBDIRS =
# The name of the module.
DOC_MODULE = goa
# The top-level SGML file.
DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.xml
# Extra options to supply to gtkdoc-scan
SCAN_OPTIONS =
# The directory containing the source code. Relative to $(srcdir)
DOC_SOURCE_DIR = $(top_srcdir)/src
HFILE_GLOB = $(top_srcdir)/src/goa/*.h $(top_srcdir)/src/goabackend/*.h
CFILE_GLOB = $(top_srcdir)/src/goa/*.c $(top_srcdir)/src/goabackend/*.c
# Headers to ignore
IGNORE_HFILES = \
config.h \
$(NULL)
# CFLAGS and LDFLAGS for compiling scan program. Only needed
# if $(DOC_MODULE).types is non-empty.
AM_CPPFLAGS = \
-I$(srcdir) \
-I$(top_srcdir) \
-I$(top_builddir) \
$(GLIB_CFLAGS) \
$(GIO_CFLAGS) \
$(NULL)
GTKDOC_LIBS = \
$(GLIB_LIBS) \
$(GIO_LIBS) \
$(top_builddir)/src/goa/libgoa-1.0.la \
$(top_builddir)/src/goabackend/libgoa-backend-1.0.la \
$(NULL)
# Extra options to supply to gtkdoc-mkdb
MKDB_OPTIONS = --output-format=xml --sgml-mode --name-space=goa
# Images to copy into HTML directory
HTML_IMAGES = \
$(NULL)
content_files = \
$(NULL)
expand_content_files = \
goa-daemon.xml \
goa-overview.xml \
$(NULL)
extra_files = \
$(NULL)
man_MANS = $(am__append_1)
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_CC = $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_LD = $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_RUN =
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_RUN = $(LIBTOOL) --mode=execute
# We set GPATH here; this gives us semantics for GNU make
# which are more like other make's VPATH, when it comes to
# whether a source that is a target of one rule is then
# searched for in VPATH/GPATH.
#
@ENABLE_GTK_DOC_TRUE@GPATH = $(srcdir)
@ENABLE_GTK_DOC_TRUE@TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE)
@ENABLE_GTK_DOC_TRUE@SETUP_FILES = \
@ENABLE_GTK_DOC_TRUE@ $(content_files) \
@ENABLE_GTK_DOC_TRUE@ $(expand_content_files) \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MAIN_SGML_FILE) \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE)-sections.txt \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE)-overrides.txt
@ENABLE_GTK_DOC_FALSE@EXTRA_DIST = goa-daemon.xml goa-overview.xml \
@ENABLE_GTK_DOC_FALSE@ version.xml.in $(NULL)
@ENABLE_GTK_DOC_TRUE@EXTRA_DIST = $(HTML_IMAGES) $(SETUP_FILES) \
@ENABLE_GTK_DOC_TRUE@ goa-daemon.xml goa-overview.xml \
@ENABLE_GTK_DOC_TRUE@ version.xml.in $(NULL)
@ENABLE_GTK_DOC_TRUE@DOC_STAMPS = setup-build.stamp scan-build.stamp sgml-build.stamp \
@ENABLE_GTK_DOC_TRUE@ html-build.stamp pdf-build.stamp \
@ENABLE_GTK_DOC_TRUE@ sgml.stamp html.stamp pdf.stamp
@ENABLE_GTK_DOC_TRUE@SCANOBJ_FILES = \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE).args \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE).hierarchy \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE).interfaces \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE).prerequisites \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE).signals
@ENABLE_GTK_DOC_TRUE@REPORT_FILES = \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE)-undocumented.txt \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE)-undeclared.txt \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE)-unused.txt
@ENABLE_GTK_DOC_FALSE@CLEANFILES = $(DOC_MODULE)-decl-list.txt \
@ENABLE_GTK_DOC_FALSE@ $(DOC_MODULE)-decl.txt \
@ENABLE_GTK_DOC_FALSE@ $(DOC_MODULE)-overrides.txt \
@ENABLE_GTK_DOC_FALSE@ $(DOC_MODULE)-undeclared.txt \
@ENABLE_GTK_DOC_FALSE@ $(DOC_MODULE)-undocumented.txt \
@ENABLE_GTK_DOC_FALSE@ $(DOC_MODULE)-overrides.txt \
@ENABLE_GTK_DOC_FALSE@ $(DOC_MODULE)-unused.txt \
@ENABLE_GTK_DOC_FALSE@ $(DOC_MODULE).args \
@ENABLE_GTK_DOC_FALSE@ $(DOC_MODULE).hierarchy \
@ENABLE_GTK_DOC_FALSE@ $(DOC_MODULE).interfaces \
@ENABLE_GTK_DOC_FALSE@ $(DOC_MODULE).prerequisites \
@ENABLE_GTK_DOC_FALSE@ $(DOC_MODULE).signals *.stamp *.8 -rf \
@ENABLE_GTK_DOC_FALSE@ xml html tmpl $(NULL)
@ENABLE_GTK_DOC_TRUE@CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) \
@ENABLE_GTK_DOC_TRUE@ $(DOC_STAMPS) gtkdoc-check.test \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE)-decl-list.txt \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE)-decl.txt \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE)-overrides.txt \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE)-undeclared.txt \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE)-undocumented.txt \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE)-overrides.txt \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE)-unused.txt \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE).args \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE).hierarchy \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE).interfaces \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE).prerequisites \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE).signals *.stamp *.8 -rf xml \
@ENABLE_GTK_DOC_TRUE@ html tmpl $(NULL)
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_HTML_FALSE@HTML_BUILD_STAMP =
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_HTML_TRUE@HTML_BUILD_STAMP = html-build.stamp
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_PDF_FALSE@PDF_BUILD_STAMP =
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_BUILD_PDF_TRUE@PDF_BUILD_STAMP = pdf-build.stamp
#### setup ####
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_SETUP = $(GTK_DOC_V_SETUP_@AM_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_SETUP_ = $(GTK_DOC_V_SETUP_@AM_DEFAULT_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_SETUP_0 = @echo " DOC Preparing build";
#### scan ####
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_SCAN = $(GTK_DOC_V_SCAN_@AM_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_SCAN_ = $(GTK_DOC_V_SCAN_@AM_DEFAULT_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_SCAN_0 = @echo " DOC Scanning header files";
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_INTROSPECT = $(GTK_DOC_V_INTROSPECT_@AM_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_INTROSPECT_ = $(GTK_DOC_V_INTROSPECT_@AM_DEFAULT_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_INTROSPECT_0 = @echo " DOC Introspecting gobjects";
#### xml ####
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_XML = $(GTK_DOC_V_XML_@AM_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_XML_ = $(GTK_DOC_V_XML_@AM_DEFAULT_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_XML_0 = @echo " DOC Building XML";
#### html ####
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_HTML = $(GTK_DOC_V_HTML_@AM_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_HTML_ = $(GTK_DOC_V_HTML_@AM_DEFAULT_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_HTML_0 = @echo " DOC Building HTML";
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_XREF = $(GTK_DOC_V_XREF_@AM_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_XREF_ = $(GTK_DOC_V_XREF_@AM_DEFAULT_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_XREF_0 = @echo " DOC Fixing cross-references";
#### pdf ####
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_PDF = $(GTK_DOC_V_PDF_@AM_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_PDF_ = $(GTK_DOC_V_PDF_@AM_DEFAULT_V@)
@ENABLE_GTK_DOC_TRUE@GTK_DOC_V_PDF_0 = @echo " DOC Building PDF";
all: all-recursive
.SUFFIXES:
.SUFFIXES: .8 .xml
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_srcdir)/gtk-doc.make $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
version.xml: $(top_builddir)/config.status $(srcdir)/version.xml.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
install-man8: $(man_MANS)
@$(NORMAL_INSTALL)
@list1=''; \
list2='$(man_MANS)'; \
test -n "$(man8dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.8[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
done; }
uninstall-man8:
@$(NORMAL_UNINSTALL)
@list=''; test -n "$(man8dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.8[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@ENABLE_GTK_DOC_FALSE@dist-hook:
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
check-am: all-am
check: check-recursive
@ENABLE_GTK_DOC_FALSE@all-local:
all-am: Makefile $(MANS) all-local
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(man8dir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
@ENABLE_GTK_DOC_FALSE@distclean-local:
@ENABLE_GTK_DOC_FALSE@install-data-local:
@ENABLE_GTK_DOC_FALSE@uninstall-local:
@ENABLE_GTK_DOC_FALSE@clean-local:
@ENABLE_GTK_DOC_FALSE@maintainer-clean-local:
clean: clean-recursive
clean-am: clean-generic clean-libtool clean-local mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local \
distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-data-local install-man
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man: install-man8
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
maintainer-clean-local
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-local uninstall-man
uninstall-man: uninstall-man8
.MAKE: $(am__recursive_targets) install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
check check-am clean clean-generic clean-libtool clean-local \
cscopelist-am ctags ctags-am dist-hook distclean \
distclean-generic distclean-libtool distclean-local \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am \
install-data-local install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-man8 install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-generic \
maintainer-clean-local mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-local uninstall-man uninstall-man8
.PRECIOUS: Makefile
.xml.8:
$(AM_V_GEN) $(XSLTPROC) \
--nonet \
--stringparam man.output.quietly 1 \
--stringparam funcsynopsis.style ansi \
http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
@ENABLE_GTK_DOC_TRUE@gtkdoc-check.test: Makefile
@ENABLE_GTK_DOC_TRUE@ $(AM_V_GEN)echo "#!/bin/sh -e" > $@; \
@ENABLE_GTK_DOC_TRUE@ echo "$(GTKDOC_CHECK_PATH) || exit 1" >> $@; \
@ENABLE_GTK_DOC_TRUE@ chmod +x $@
@ENABLE_GTK_DOC_TRUE@all-gtk-doc: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
@ENABLE_GTK_DOC_TRUE@.PHONY: all-gtk-doc
@ENABLE_GTK_DOC_TRUE@all-local: all-gtk-doc
@ENABLE_GTK_DOC_TRUE@docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
@ENABLE_GTK_DOC_TRUE@$(REPORT_FILES): sgml-build.stamp
@ENABLE_GTK_DOC_TRUE@setup-build.stamp:
@ENABLE_GTK_DOC_TRUE@ -$(GTK_DOC_V_SETUP)if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
@ENABLE_GTK_DOC_TRUE@ files=`echo $(SETUP_FILES) $(DOC_MODULE).types`; \
@ENABLE_GTK_DOC_TRUE@ if test "x$$files" != "x" ; then \
@ENABLE_GTK_DOC_TRUE@ for file in $$files ; do \
@ENABLE_GTK_DOC_TRUE@ destdir=`dirname $(abs_builddir)/$$file`; \
@ENABLE_GTK_DOC_TRUE@ test -d "$$destdir" || mkdir -p "$$destdir"; \
@ENABLE_GTK_DOC_TRUE@ test -f $(abs_srcdir)/$$file && \
@ENABLE_GTK_DOC_TRUE@ cp -pf $(abs_srcdir)/$$file $(abs_builddir)/$$file || true; \
@ENABLE_GTK_DOC_TRUE@ done; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ fi
@ENABLE_GTK_DOC_TRUE@ $(AM_V_at)touch setup-build.stamp
@ENABLE_GTK_DOC_TRUE@scan-build.stamp: setup-build.stamp $(HFILE_GLOB) $(CFILE_GLOB)
@ENABLE_GTK_DOC_TRUE@ $(GTK_DOC_V_SCAN)_source_dir='' ; \
@ENABLE_GTK_DOC_TRUE@ for i in $(DOC_SOURCE_DIR) ; do \
@ENABLE_GTK_DOC_TRUE@ _source_dir="$${_source_dir} --source-dir=$$i" ; \
@ENABLE_GTK_DOC_TRUE@ done ; \
@ENABLE_GTK_DOC_TRUE@ gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES)
@ENABLE_GTK_DOC_TRUE@ $(GTK_DOC_V_INTROSPECT)if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \
@ENABLE_GTK_DOC_TRUE@ scanobj_options=""; \
@ENABLE_GTK_DOC_TRUE@ gtkdoc-scangobj 2>&1 --help | grep >/dev/null "\-\-verbose"; \
@ENABLE_GTK_DOC_TRUE@ if test "$$?" = "0"; then \
@ENABLE_GTK_DOC_TRUE@ if test "x$(V)" = "x1"; then \
@ENABLE_GTK_DOC_TRUE@ scanobj_options="--verbose"; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \
@ENABLE_GTK_DOC_TRUE@ gtkdoc-scangobj $(SCANGOBJ_OPTIONS) $$scanobj_options --module=$(DOC_MODULE); \
@ENABLE_GTK_DOC_TRUE@ else \
@ENABLE_GTK_DOC_TRUE@ for i in $(SCANOBJ_FILES) ; do \
@ENABLE_GTK_DOC_TRUE@ test -f $$i || touch $$i ; \
@ENABLE_GTK_DOC_TRUE@ done \
@ENABLE_GTK_DOC_TRUE@ fi
@ENABLE_GTK_DOC_TRUE@ $(AM_V_at)touch scan-build.stamp
@ENABLE_GTK_DOC_TRUE@$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp
@ENABLE_GTK_DOC_TRUE@ @true
@ENABLE_GTK_DOC_TRUE@sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(HFILE_GLOB) $(CFILE_GLOB) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files) xml/gtkdocentities.ent
@ENABLE_GTK_DOC_TRUE@ $(GTK_DOC_V_XML)_source_dir='' ; \
@ENABLE_GTK_DOC_TRUE@ for i in $(DOC_SOURCE_DIR) ; do \
@ENABLE_GTK_DOC_TRUE@ _source_dir="$${_source_dir} --source-dir=$$i" ; \
@ENABLE_GTK_DOC_TRUE@ done ; \
@ENABLE_GTK_DOC_TRUE@ gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS)
@ENABLE_GTK_DOC_TRUE@ $(AM_V_at)touch sgml-build.stamp
@ENABLE_GTK_DOC_TRUE@sgml.stamp: sgml-build.stamp
@ENABLE_GTK_DOC_TRUE@ @true
@ENABLE_GTK_DOC_TRUE@$(DOC_MAIN_SGML_FILE): sgml-build.stamp
@ENABLE_GTK_DOC_TRUE@ @true
@ENABLE_GTK_DOC_TRUE@xml/gtkdocentities.ent: Makefile
@ENABLE_GTK_DOC_TRUE@ $(GTK_DOC_V_XML)$(MKDIR_P) $(@D) && ( \
@ENABLE_GTK_DOC_TRUE@ echo "<!ENTITY package \"$(PACKAGE)\">"; \
@ENABLE_GTK_DOC_TRUE@ echo "<!ENTITY package_bugreport \"$(PACKAGE_BUGREPORT)\">"; \
@ENABLE_GTK_DOC_TRUE@ echo "<!ENTITY package_name \"$(PACKAGE_NAME)\">"; \
@ENABLE_GTK_DOC_TRUE@ echo "<!ENTITY package_string \"$(PACKAGE_STRING)\">"; \
@ENABLE_GTK_DOC_TRUE@ echo "<!ENTITY package_tarname \"$(PACKAGE_TARNAME)\">"; \
@ENABLE_GTK_DOC_TRUE@ echo "<!ENTITY package_url \"$(PACKAGE_URL)\">"; \
@ENABLE_GTK_DOC_TRUE@ echo "<!ENTITY package_version \"$(PACKAGE_VERSION)\">"; \
@ENABLE_GTK_DOC_TRUE@ ) > $@
@ENABLE_GTK_DOC_TRUE@html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files)
@ENABLE_GTK_DOC_TRUE@ $(GTK_DOC_V_HTML)rm -rf html && mkdir html && \
@ENABLE_GTK_DOC_TRUE@ mkhtml_options=""; \
@ENABLE_GTK_DOC_TRUE@ gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-verbose"; \
@ENABLE_GTK_DOC_TRUE@ if test "$$?" = "0"; then \
@ENABLE_GTK_DOC_TRUE@ if test "x$(V)" = "x1"; then \
@ENABLE_GTK_DOC_TRUE@ mkhtml_options="$$mkhtml_options --verbose"; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-path"; \
@ENABLE_GTK_DOC_TRUE@ if test "$$?" = "0"; then \
@ENABLE_GTK_DOC_TRUE@ mkhtml_options="$$mkhtml_options --path=\"$(abs_srcdir)\""; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
@ENABLE_GTK_DOC_TRUE@ -@test "x$(HTML_IMAGES)" = "x" || \
@ENABLE_GTK_DOC_TRUE@ for file in $(HTML_IMAGES) ; do \
@ENABLE_GTK_DOC_TRUE@ test -f $(abs_srcdir)/$$file && cp $(abs_srcdir)/$$file $(abs_builddir)/html; \
@ENABLE_GTK_DOC_TRUE@ test -f $(abs_builddir)/$$file && cp $(abs_builddir)/$$file $(abs_builddir)/html; \
@ENABLE_GTK_DOC_TRUE@ done;
@ENABLE_GTK_DOC_TRUE@ $(GTK_DOC_V_XREF)gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
@ENABLE_GTK_DOC_TRUE@ $(AM_V_at)touch html-build.stamp
@ENABLE_GTK_DOC_TRUE@pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files)
@ENABLE_GTK_DOC_TRUE@ $(GTK_DOC_V_PDF)rm -f $(DOC_MODULE).pdf && \
@ENABLE_GTK_DOC_TRUE@ mkpdf_options=""; \
@ENABLE_GTK_DOC_TRUE@ gtkdoc-mkpdf 2>&1 --help | grep >/dev/null "\-\-verbose"; \
@ENABLE_GTK_DOC_TRUE@ if test "$$?" = "0"; then \
@ENABLE_GTK_DOC_TRUE@ if test "x$(V)" = "x1"; then \
@ENABLE_GTK_DOC_TRUE@ mkpdf_options="$$mkpdf_options --verbose"; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ if test "x$(HTML_IMAGES)" != "x"; then \
@ENABLE_GTK_DOC_TRUE@ for img in $(HTML_IMAGES); do \
@ENABLE_GTK_DOC_TRUE@ part=`dirname $$img`; \
@ENABLE_GTK_DOC_TRUE@ echo $$mkpdf_options | grep >/dev/null "\-\-imgdir=$$part "; \
@ENABLE_GTK_DOC_TRUE@ if test $$? != 0; then \
@ENABLE_GTK_DOC_TRUE@ mkpdf_options="$$mkpdf_options --imgdir=$$part"; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ done; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_options $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS)
@ENABLE_GTK_DOC_TRUE@ $(AM_V_at)touch pdf-build.stamp
##############
@ENABLE_GTK_DOC_TRUE@clean-local:
@ENABLE_GTK_DOC_TRUE@ @rm -f *~ *.bak
@ENABLE_GTK_DOC_TRUE@ @rm -rf .libs
@ENABLE_GTK_DOC_TRUE@ @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-types" ; then \
@ENABLE_GTK_DOC_TRUE@ rm -f $(DOC_MODULE).types; \
@ENABLE_GTK_DOC_TRUE@ fi
@ENABLE_GTK_DOC_TRUE@ @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-sections" ; then \
@ENABLE_GTK_DOC_TRUE@ rm -f $(DOC_MODULE)-sections.txt; \
@ENABLE_GTK_DOC_TRUE@ fi
@ENABLE_GTK_DOC_TRUE@distclean-local:
@ENABLE_GTK_DOC_TRUE@ @rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \
@ENABLE_GTK_DOC_TRUE@ $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt
@ENABLE_GTK_DOC_TRUE@ @if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
@ENABLE_GTK_DOC_TRUE@ rm -f $(SETUP_FILES) $(DOC_MODULE).types; \
@ENABLE_GTK_DOC_TRUE@ fi
@ENABLE_GTK_DOC_TRUE@maintainer-clean-local:
@ENABLE_GTK_DOC_TRUE@ @rm -rf xml html
@ENABLE_GTK_DOC_TRUE@install-data-local:
@ENABLE_GTK_DOC_TRUE@ @installfiles=`echo $(builddir)/html/*`; \
@ENABLE_GTK_DOC_TRUE@ if test "$$installfiles" = '$(builddir)/html/*'; \
@ENABLE_GTK_DOC_TRUE@ then echo 1>&2 'Nothing to install' ; \
@ENABLE_GTK_DOC_TRUE@ else \
@ENABLE_GTK_DOC_TRUE@ if test -n "$(DOC_MODULE_VERSION)"; then \
@ENABLE_GTK_DOC_TRUE@ installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
@ENABLE_GTK_DOC_TRUE@ else \
@ENABLE_GTK_DOC_TRUE@ installdir="$(DESTDIR)$(TARGET_DIR)"; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ $(mkinstalldirs) $${installdir} ; \
@ENABLE_GTK_DOC_TRUE@ for i in $$installfiles; do \
@ENABLE_GTK_DOC_TRUE@ echo ' $(INSTALL_DATA) '$$i ; \
@ENABLE_GTK_DOC_TRUE@ $(INSTALL_DATA) $$i $${installdir}; \
@ENABLE_GTK_DOC_TRUE@ done; \
@ENABLE_GTK_DOC_TRUE@ if test -n "$(DOC_MODULE_VERSION)"; then \
@ENABLE_GTK_DOC_TRUE@ mv -f $${installdir}/$(DOC_MODULE).devhelp2 \
@ENABLE_GTK_DOC_TRUE@ $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \
@ENABLE_GTK_DOC_TRUE@ fi
@ENABLE_GTK_DOC_TRUE@uninstall-local:
@ENABLE_GTK_DOC_TRUE@ @if test -n "$(DOC_MODULE_VERSION)"; then \
@ENABLE_GTK_DOC_TRUE@ installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
@ENABLE_GTK_DOC_TRUE@ else \
@ENABLE_GTK_DOC_TRUE@ installdir="$(DESTDIR)$(TARGET_DIR)"; \
@ENABLE_GTK_DOC_TRUE@ fi; \
@ENABLE_GTK_DOC_TRUE@ rm -rf $${installdir}
#
# Require gtk-doc when making dist
#
@ENABLE_GTK_DOC_TRUE@@HAVE_GTK_DOC_TRUE@dist-check-gtkdoc: docs
@ENABLE_GTK_DOC_TRUE@@HAVE_GTK_DOC_FALSE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_TRUE@@HAVE_GTK_DOC_FALSE@ @echo "*** gtk-doc is needed to run 'make dist'. ***"
@ENABLE_GTK_DOC_TRUE@@HAVE_GTK_DOC_FALSE@ @echo "*** gtk-doc was not found when 'configure' ran. ***"
@ENABLE_GTK_DOC_TRUE@@HAVE_GTK_DOC_FALSE@ @echo "*** please install gtk-doc and rerun 'configure'. ***"
@ENABLE_GTK_DOC_TRUE@@HAVE_GTK_DOC_FALSE@ @false
@ENABLE_GTK_DOC_TRUE@dist-hook: dist-check-gtkdoc all-gtk-doc dist-hook-local
@ENABLE_GTK_DOC_TRUE@ @mkdir $(distdir)/html
@ENABLE_GTK_DOC_TRUE@ @cp ./html/* $(distdir)/html
@ENABLE_GTK_DOC_TRUE@ @-cp ./$(DOC_MODULE).pdf $(distdir)/
@ENABLE_GTK_DOC_TRUE@ @-cp ./$(DOC_MODULE).types $(distdir)/
@ENABLE_GTK_DOC_TRUE@ @-cp ./$(DOC_MODULE)-sections.txt $(distdir)/
@ENABLE_GTK_DOC_TRUE@ @cd $(distdir) && rm -f $(DISTCLEANFILES)
@ENABLE_GTK_DOC_TRUE@ @$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html
@ENABLE_GTK_DOC_TRUE@.PHONY : dist-hook-local docs
-include $(top_srcdir)/git.mk
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: