dnl IA-64 mpn_divexact_1 -- mpn by limb exact division. dnl Contributed to the GNU project by Torbjorn Granlund and Kevin Ryde. dnl Copyright 2003-2005, 2010 Free Software Foundation, Inc. dnl This file is part of the GNU MP Library. dnl dnl The GNU MP Library is free software; you can redistribute it and/or modify dnl it under the terms of either: dnl dnl * the GNU Lesser General Public License as published by the Free dnl Software Foundation; either version 3 of the License, or (at your dnl option) any later version. dnl dnl or dnl dnl * the GNU General Public License as published by the Free Software dnl Foundation; either version 2 of the License, or (at your option) any dnl later version. dnl dnl or both in parallel, as here. dnl dnl The GNU MP Library is distributed in the hope that it will be useful, but dnl WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY dnl or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License dnl for more details. dnl dnl You should have received copies of the GNU General Public License and the dnl GNU Lesser General Public License along with the GNU MP Library. If not, dnl see https://www.gnu.org/licenses/. include(`../config.m4') C cycles/limb C Itanium: 16 C Itanium 2: 8 C INPUT PARAMETERS define(`rp', `r32') define(`up', `r33') define(`n', `r34') define(`divisor', `r35') define(`lshift', `r24') define(`rshift', `r25') C This code is a bit messy, and not as similar to mode1o.asm as desired. C The critical path during initialization is for computing the inverse of the C divisor. Since odd divisors are probably common, we conditionally execute C the initial count_trailing_zeros code and the downshift. C Possible improvement: Merge more of the feed-in code into the inverse C computation. ASM_START() .text .align 32 .Ltab: data1 0,0x01, 0,0xAB, 0,0xCD, 0,0xB7, 0,0x39, 0,0xA3, 0,0xC5, 0,0xEF data1 0,0xF1, 0,0x1B, 0,0x3D, 0,0xA7, 0,0x29, 0,0x13, 0,0x35, 0,0xDF data1 0,0xE1, 0,0x8B, 0,0xAD, 0,0x97, 0,0x19, 0,0x83, 0,0xA5, 0,0xCF data1 0,0xD1, 0,0xFB, 0,0x1D, 0,0x87, 0,0x09, 0,0xF3, 0,0x15, 0,0xBF data1 0,0xC1, 0,0x6B, 0,0x8D, 0,0x77, 0,0xF9, 0,0x63, 0,0x85, 0,0xAF data1 0,0xB1, 0,0xDB, 0,0xFD, 0,0x67, 0,0xE9, 0,0xD3, 0,0xF5, 0,0x9F data1 0,0xA1, 0,0x4B, 0,0x6D, 0,0x57, 0,0xD9, 0,0x43, 0,0x65, 0,0x8F data1 0,0x91, 0,0xBB, 0,0xDD, 0,0x47, 0,0xC9, 0,0xB3, 0,0xD5, 0,0x7F data1 0,0x81, 0,0x2B, 0,0x4D, 0,0x37, 0,0xB9, 0,0x23, 0,0x45, 0,0x6F data1 0,0x71, 0,0x9B, 0,0xBD, 0,0x27, 0,0xA9, 0,0x93, 0,0xB5, 0,0x5F data1 0,0x61, 0,0x0B, 0,0x2D, 0,0x17, 0,0x99, 0,0x03, 0,0x25, 0,0x4F data1 0,0x51, 0,0x7B, 0,0x9D, 0,0x07, 0,0x89, 0,0x73, 0,0x95, 0,0x3F data1 0,0x41, 0,0xEB, 0,0x0D, 0,0xF7, 0,0x79, 0,0xE3, 0,0x05, 0,0x2F data1 0,0x31, 0,0x5B, 0,0x7D, 0,0xE7, 0,0x69, 0,0x53, 0,0x75, 0,0x1F data1 0,0x21, 0,0xCB, 0,0xED, 0,0xD7, 0,0x59, 0,0xC3, 0,0xE5, 0,0x0F data1 0,0x11, 0,0x3B, 0,0x5D, 0,0xC7, 0,0x49, 0,0x33, 0,0x55, 0,0xFF PROLOGUE(mpn_divexact_1) .prologue .save ar.lc, r2 .body {.mmi; add r8 = -1, divisor C M0 nop 0 C M1 tbit.z p8, p9 = divisor, 0 C I0 } ifdef(`HAVE_ABI_32', ` addp4 rp = 0, rp C M2 rp extend addp4 up = 0, up C M3 up extend sxt4 n = n') C I1 size extend ;; .Lhere: {.mmi; ld8 r20 = [up], 8 C M0 up[0] (p8) andcm r8 = r8, divisor C M1 mov r15 = ip C I0 .Lhere ;; }{.mii .pred.rel "mutex", p8, p9 (p9) mov rshift = 0 C M0 (p8) popcnt rshift = r8 C I0 r8 = cnt_lo_zeros(divisor) cmp.eq p6, p10 = 1, n C I1 ;; }{.mii; add r9 = .Ltab-.Lhere, r15 C M0 (p8) shr.u divisor = divisor, rshift C I0 nop 0 C I1 ;; }{.mmi; add n = -4, n C M0 size-1 (p10) ld8 r21 = [up], 8 C M1 up[1] mov r14 = 2 C M1 2 }{.mfi; setf.sig f6 = divisor C M2 divisor mov f9 = f0 C M3 carry FIXME zxt1 r3 = divisor C I1 divisor low byte ;; }{.mmi; add r3 = r9, r3 C M0 table offset ip and index sub r16 = 0, divisor C M1 -divisor mov r2 = ar.lc C I0 }{.mmi; sub lshift = 64, rshift C M2 setf.sig f13 = r14 C M3 2 in significand mov r17 = -1 C I1 -1 ;; }{.mmi; ld1 r3 = [r3] C M0 inverse, 8 bits nop 0 C M1 mov ar.lc = n C I0 size-1 loop count }{.mmi; setf.sig f12 = r16 C M2 -divisor setf.sig f8 = r17 C M3 -1 cmp.eq p7, p0 = -2, n C I1 ;; }{.mmi; setf.sig f7 = r3 C M2 inverse, 8 bits cmp.eq p8, p0 = -1, n C M0 shr.u r23 = r20, rshift C I0 ;; } C f6 divisor C f7 inverse, being calculated C f8 -1, will be -inverse C f9 carry C f12 -divisor C f13 2 C f14 scratch xmpy.l f14 = f13, f7 C Newton 2*i xmpy.l f7 = f7, f7 C Newton i*i ;; xma.l f7 = f7, f12, f14 C Newton i*i*-d + 2*i, 16 bits ;; setf.sig f10 = r23 C speculative, used iff n = 1 xmpy.l f14 = f13, f7 C Newton 2*i shl r22 = r21, lshift C speculative, used iff n > 1 xmpy.l f7 = f7, f7 C Newton i*i ;; or r31 = r22, r23 C speculative, used iff n > 1 xma.l f7 = f7, f12, f14 C Newton i*i*-d + 2*i, 32 bits shr.u r23 = r21, rshift C speculative, used iff n > 1 ;; setf.sig f11 = r31 C speculative, used iff n > 1 xmpy.l f14 = f13, f7 C Newton 2*i xmpy.l f7 = f7, f7 C Newton i*i ;; xma.l f7 = f7, f12, f14 C Newton i*i*-d + 2*i, 64 bits (p7) br.cond.dptk .Ln2 (p10) br.cond.dptk .grt3 ;; .Ln1: xmpy.l f12 = f10, f7 C q = ulimb * inverse br .Lx1 .Ln2: xmpy.l f8 = f7, f8 C -inverse = inverse * -1 xmpy.l f12 = f11, f7 C q = ulimb * inverse setf.sig f11 = r23 br .Lx2 .grt3: ld8 r21 = [up], 8 C up[2] xmpy.l f8 = f7, f8 C -inverse = inverse * -1 ;; shl r22 = r21, lshift ;; xmpy.l f12 = f11, f7 C q = ulimb * inverse ;; or r31 = r22, r23 shr.u r23 = r21, rshift ;; setf.sig f11 = r31 (p8) br.cond.dptk .Lx3 C branch for n = 3 ;; ld8 r21 = [up], 8 br .Lent .Ltop: ld8 r21 = [up], 8 xma.l f12 = f9, f8, f10 C q = c * -inverse + si nop.b 0 ;; .Lent: add r16 = 160, up shl r22 = r21, lshift nop.b 0 ;; stf8 [rp] = f12, 8 xma.hu f9 = f12, f6, f9 C c = high(q * divisor + c) nop.b 0 nop.m 0 xmpy.l f10 = f11, f7 C si = ulimb * inverse nop.b 0 ;; or r31 = r22, r23 shr.u r23 = r21, rshift nop.b 0 ;; lfetch [r16] setf.sig f11 = r31 br.cloop.sptk.few.clr .Ltop xma.l f12 = f9, f8, f10 C q = c * -inverse + si ;; .Lx3: stf8 [rp] = f12, 8 xma.hu f9 = f12, f6, f9 C c = high(q * divisor + c) xmpy.l f10 = f11, f7 C si = ulimb * inverse ;; setf.sig f11 = r23 ;; xma.l f12 = f9, f8, f10 C q = c * -inverse + si ;; .Lx2: stf8 [rp] = f12, 8 xma.hu f9 = f12, f6, f9 C c = high(q * divisor + c) xmpy.l f10 = f11, f7 C si = ulimb * inverse ;; xma.l f12 = f9, f8, f10 C q = c * -inverse + si ;; .Lx1: stf8 [rp] = f12, 8 mov ar.lc = r2 C I0 br.ret.sptk.many b0 EPILOGUE()