From f0081289be5e645924b388e781339929b021e207 Mon Sep 17 00:00:00 2001
From: Packit <packit>
Date: Sep 18 2020 14:33:56 +0000
Subject: flex-2.6.1 base


---

diff --git a/.indent.pro b/.indent.pro
new file mode 100644
index 0000000..3f8232f
--- /dev/null
+++ b/.indent.pro
@@ -0,0 +1,15 @@
+--blank-lines-after-declarations
+--blank-lines-after-procedures
+-br  /* open braces on same line */
+-nce /* start else on new line */
+-nbc /* vars on same line */
+-di8 /* line up var decl at col 8 */
+-brs /* struct brace on same line */
+-i8  /* indent 4  */
+-lp  /* line up parens */
+-ts8 /* tab stop */
+-bbo /* break before && || */
+-hnl /* honor newlines */
+--space-special-semicolon
+--line-length75
+--dont-break-procedure-type
diff --git a/ABOUT-NLS b/ABOUT-NLS
new file mode 100644
index 0000000..b1de1b6
--- /dev/null
+++ b/ABOUT-NLS
@@ -0,0 +1,1282 @@
+1 Notes on the Free Translation Project
+***************************************
+
+Free software is going international!  The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
+together, so that free software will gradually become able to speak many
+languages.  A few packages already provide translations for their
+messages.
+
+   If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site.  But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+   Installers will find here some useful hints.  These notes also
+explain how users should proceed for getting the programs to use the
+available translations.  They tell how people wanting to contribute and
+work on translations can contact the appropriate team.
+
+1.1 INSTALL Matters
+===================
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language.  Most such
+packages use GNU `gettext'.  Other packages have their own ways to
+internationalization, predating GNU `gettext'.
+
+   By default, this package will be installed to allow translation of
+messages.  It will automatically detect whether the system already
+provides the GNU `gettext' functions.  Installers may use special
+options at configuration time for changing the default behaviour.  The
+command:
+
+     ./configure --disable-nls
+
+will _totally_ disable translation of messages.
+
+   When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl' library
+and will decide to use it.  If not, you may have to to use the
+`--with-libintl-prefix' option to tell `configure' where to look for it.
+
+   Internationalized packages usually have many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language.  Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package.  However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+1.2 Using This Package
+======================
+
+As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination.  If you happen to have the `LC_ALL' or some other
+`LC_xxx' environment variables set, you should unset them before
+setting `LANG', otherwise the setting of `LANG' will not have the
+desired effect.  Here `LL' is an ISO 639 two-letter language code, and
+`CC' is an ISO 3166 two-letter country code.  For example, let's
+suppose that you speak German and live in Germany.  At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+   You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries.  For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil.  The
+country code serves to distinguish the dialects.
+
+   The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc.  On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'.  You can get the list of
+locales supported by your system for your language by running the
+command `locale -a | grep '^LL''.
+
+   Not all programs have translations for all languages.  By default, an
+English message is shown in place of a nonexistent translation.  If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'.  GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries.  For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+   Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003).  During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
+   In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect.  For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+1.3 Translating Teams
+=====================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list.  The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://translationproject.org/', in the "Teams" area.
+
+   If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended.  For example, speakers of Swedish can send a
+message to `sv-request@li.org', having this message body:
+
+     subscribe
+
+   Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around.  If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to `coordinator@translationproject.org' to
+reach the coordinator for all translator teams.
+
+   The English team is special.  It works at improving and uniformizing
+the terminology in use.  Proven linguistic skills are praised more than
+programming skills, here.
+
+1.4 Available Packages
+======================
+
+Languages are not equally supported in all packages.  The following
+matrix shows the current state of internationalization, as of June
+2010.  The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+     Ready PO files       af am an ar as ast az be be@latin bg bn_IN bs ca
+                        +--------------------------------------------------+
+     a2ps               |                       []                      [] |
+     aegis              |                                                  |
+     ant-phone          |                                                  |
+     anubis             |                                                  |
+     aspell             |                []                             [] |
+     bash               |                                                  |
+     bfd                |                                                  |
+     bibshelf           |                []                                |
+     binutils           |                                                  |
+     bison              |                                                  |
+     bison-runtime      |                []                                |
+     bluez-pin          | []             []                                |
+     bombono-dvd        |                                                  |
+     buzztard           |                                                  |
+     cflow              |                                                  |
+     clisp              |                                                  |
+     coreutils          |                                   []          [] |
+     cpio               |                                                  |
+     cppi               |                                                  |
+     cpplib             |                                               [] |
+     cryptsetup         |                                                  |
+     dfarc              |                                                  |
+     dialog             |                             []                [] |
+     dico               |                                                  |
+     diffutils          |                                               [] |
+     dink               |                                                  |
+     doodle             |                                                  |
+     e2fsprogs          |                                               [] |
+     enscript           |                                               [] |
+     exif               |                                                  |
+     fetchmail          |                                               [] |
+     findutils          |                                   []             |
+     flex               |                                               [] |
+     freedink           |                                                  |
+     gas                |                                                  |
+     gawk               |                []                             [] |
+     gcal               |                                               [] |
+     gcc                |                                                  |
+     gettext-examples   | []             []                 []          [] |
+     gettext-runtime    |                                   []          [] |
+     gettext-tools      |                                   []          [] |
+     gip                |                                   []             |
+     gjay               |                                                  |
+     gliv               |                                   []             |
+     glunarclock        |                []                 []             |
+     gnubiff            |                                                  |
+     gnucash            |                                               [] |
+     gnuedu             |                                                  |
+     gnulib             |                                                  |
+     gnunet             |                                                  |
+     gnunet-gtk         |                                                  |
+     gnutls             |                                                  |
+     gold               |                                                  |
+     gpe-aerial         |                                                  |
+     gpe-beam           |                                                  |
+     gpe-bluetooth      |                                                  |
+     gpe-calendar       |                                                  |
+     gpe-clock          |                []                                |
+     gpe-conf           |                                                  |
+     gpe-contacts       |                                                  |
+     gpe-edit           |                                                  |
+     gpe-filemanager    |                                                  |
+     gpe-go             |                                                  |
+     gpe-login          |                                                  |
+     gpe-ownerinfo      |                []                                |
+     gpe-package        |                                                  |
+     gpe-sketchbook     |                                                  |
+     gpe-su             |                []                                |
+     gpe-taskmanager    |                []                                |
+     gpe-timesheet      |                []                                |
+     gpe-today          |                []                                |
+     gpe-todo           |                                                  |
+     gphoto2            |                                                  |
+     gprof              |                                   []             |
+     gpsdrive           |                                                  |
+     gramadoir          |                                                  |
+     grep               |                                                  |
+     grub               |                []                             [] |
+     gsasl              |                                                  |
+     gss                |                                                  |
+     gst-plugins-bad    |                                   []             |
+     gst-plugins-base   |                                   []             |
+     gst-plugins-good   |                                   []             |
+     gst-plugins-ugly   |                                   []             |
+     gstreamer          | []                                []          [] |
+     gtick              |                                                  |
+     gtkam              |                       []                         |
+     gtkorphan          |                                   []             |
+     gtkspell           | []             []     []                         |
+     gutenprint         |                                                  |
+     hello              |                                   []             |
+     help2man           |                                                  |
+     hylafax            |                                                  |
+     idutils            |                                                  |
+     indent             |                                   []          [] |
+     iso_15924          |                                                  |
+     iso_3166           | []          []        []          []  []   [] [] |
+     iso_3166_2         |                                                  |
+     iso_4217           |                                                  |
+     iso_639            |             [] []     []              []         |
+     iso_639_3          |                                                  |
+     jwhois             |                                                  |
+     kbd                |                                                  |
+     keytouch           |                                               [] |
+     keytouch-editor    |                                                  |
+     keytouch-keyboa... |                                               [] |
+     klavaro            |          []                                      |
+     latrine            |                                                  |
+     ld                 |                                   []             |
+     leafpad            |                                   []          [] |
+     libc               |                                   []          [] |
+     libexif            |                       ()                         |
+     libextractor       |                                                  |
+     libgnutls          |                                                  |
+     libgpewidget       |                                                  |
+     libgpg-error       |                                                  |
+     libgphoto2         |                                                  |
+     libgphoto2_port    |                                                  |
+     libgsasl           |                                                  |
+     libiconv           |                                   []             |
+     libidn             |                                                  |
+     lifelines          |                                                  |
+     liferea            |                             []                [] |
+     lilypond           |                                                  |
+     linkdr             |          []                                      |
+     lordsawar          |                                                  |
+     lprng              |                                                  |
+     lynx               |                                               [] |
+     m4                 |                                                  |
+     mailfromd          |                                                  |
+     mailutils          |                                                  |
+     make               |                                                  |
+     man-db             |                                                  |
+     man-db-manpages    |                                                  |
+     minicom            |                                                  |
+     mkisofs            |                                                  |
+     myserver           |                                                  |
+     nano               |                                   []          [] |
+     opcodes            |                                                  |
+     parted             |                                                  |
+     pies               |                                                  |
+     popt               |                                                  |
+     psmisc             |                                                  |
+     pspp               |                                               [] |
+     pwdutils           |                                                  |
+     radius             |                                               [] |
+     recode             |                       []                      [] |
+     rosegarden         |                                                  |
+     rpm                |                                                  |
+     rush               |                                                  |
+     sarg               |                                                  |
+     screem             |                                                  |
+     scrollkeeper       |                    [] []                      [] |
+     sed                |                []                             [] |
+     sharutils          |                                   []          [] |
+     shishi             |                                                  |
+     skencil            |                                                  |
+     solfege            |                                                  |
+     solfege-manual     |                                                  |
+     soundtracker       |                                                  |
+     sp                 |                                                  |
+     sysstat            |                                                  |
+     tar                |                                   []             |
+     texinfo            |                                                  |
+     tin                |                                                  |
+     unicode-han-tra... |                                                  |
+     unicode-transla... |                                                  |
+     util-linux-ng      |                                               [] |
+     vice               |                                                  |
+     vmm                |                                                  |
+     vorbis-tools       |                                                  |
+     wastesedge         |                                                  |
+     wdiff              |                                                  |
+     wget               |                       []                      [] |
+     wyslij-po          |                                                  |
+     xchat              |                []     []          []          [] |
+     xdg-user-dirs      | []    []    [] []     []    []    []  []      [] |
+     xkeyboard-config   |                                   []          [] |
+                        +--------------------------------------------------+
+                          af am an ar as ast az be be@latin bg bn_IN bs ca
+                           6  0  1  2  3 19   1 10     3    28   3    1 38
+
+                          crh cs da  de  el en en_GB en_ZA eo es et eu fa
+                        +-------------------------------------------------+
+     a2ps               |     [] []  []  []     []            [] []       |
+     aegis              |        []  []                       []          |
+     ant-phone          |        []  ()                                   |
+     anubis             |        []  []                                   |
+     aspell             |     [] []  []         []            []          |
+     bash               |     []                           [] []          |
+     bfd                |                                     []          |
+     bibshelf           |        []  []                       []          |
+     binutils           |                                     []          |
+     bison              |            []  []                               |
+     bison-runtime      |        []  []  []                      []       |
+     bluez-pin          |     [] []  []  []                [] []          |
+     bombono-dvd        |        []                                       |
+     buzztard           |     [] []  []                                   |
+     cflow              |        []  []                                   |
+     clisp              |        []  []     []                []          |
+     coreutils          |     [] []  []                          []       |
+     cpio               |                                                 |
+     cppi               |                                                 |
+     cpplib             |        []  []                       []          |
+     cryptsetup         |            []                                   |
+     dfarc              |        []  []                       []          |
+     dialog             |        []  []                    [] []    []    |
+     dico               |                                                 |
+     diffutils          |     [] []  []  []                [] []          |
+     dink               |        []  []                       []          |
+     doodle             |            []                                   |
+     e2fsprogs          |     []     []                       []          |
+     enscript           |        []  []         []                        |
+     exif               |     () []  []                                   |
+     fetchmail          |     [] []  ()  []     []            []          |
+     findutils          |     [] []  []                                   |
+     flex               |            []                       []          |
+     freedink           |        []  []                       []          |
+     gas                |                                     []          |
+     gawk               |        []  []                       []          |
+     gcal               |                                     []          |
+     gcc                |            []                       []          |
+     gettext-examples   |            []  []                [] []          |
+     gettext-runtime    |        []  []                    [] []          |
+     gettext-tools      |            []                       []    []    |
+     gip                |        []  []                       []    []    |
+     gjay               |            []                                   |
+     gliv               |     [] []  []                                   |
+     glunarclock        |        []  []                                   |
+     gnubiff            |            ()                                   |
+     gnucash            |     []     ()  ()     ()            ()          |
+     gnuedu             |        []                           []          |
+     gnulib             |            []                       []          |
+     gnunet             |                                                 |
+     gnunet-gtk         |        []                                       |
+     gnutls             |     []     []                                   |
+     gold               |                                     []          |
+     gpe-aerial         |     [] []  []                       []          |
+     gpe-beam           |     [] []  []                       []          |
+     gpe-bluetooth      |        []  []                                   |
+     gpe-calendar       |        []                                       |
+     gpe-clock          |     [] []  []                       []          |
+     gpe-conf           |     [] []  []                                   |
+     gpe-contacts       |        []  []                       []          |
+     gpe-edit           |        []  []                                   |
+     gpe-filemanager    |        []  []                       []          |
+     gpe-go             |     [] []  []                       []          |
+     gpe-login          |        []  []                                   |
+     gpe-ownerinfo      |     [] []  []                       []          |
+     gpe-package        |        []  []                       []          |
+     gpe-sketchbook     |     [] []  []                       []          |
+     gpe-su             |     [] []  []                       []          |
+     gpe-taskmanager    |     [] []  []                       []          |
+     gpe-timesheet      |     [] []  []                       []          |
+     gpe-today          |     [] []  []                       []          |
+     gpe-todo           |        []  []                       []          |
+     gphoto2            |     [] []  ()         []            []    []    |
+     gprof              |        []  []                       []          |
+     gpsdrive           |        []                           [] []       |
+     gramadoir          |        []  []                    []             |
+     grep               |     []                                          |
+     grub               |        []  []                                   |
+     gsasl              |            []                                   |
+     gss                |                                                 |
+     gst-plugins-bad    |     [] []  []                       []    []    |
+     gst-plugins-base   |     [] []  []                       []    []    |
+     gst-plugins-good   |     [] []  []  []                   []    []    |
+     gst-plugins-ugly   |     [] []  []  []                   []    []    |
+     gstreamer          |     [] []  []                       []    []    |
+     gtick              |        []  ()                    []             |
+     gtkam              |     [] []  ()                    [] []          |
+     gtkorphan          |     [] []  []                    []             |
+     gtkspell           |     [] []  []  []                [] []    []    |
+     gutenprint         |        []  []         []                        |
+     hello              |        []  []                    [] []          |
+     help2man           |            []                                   |
+     hylafax            |            []                       []          |
+     idutils            |        []  []                                   |
+     indent             |     [] []  []                    [] [] [] []    |
+     iso_15924          |        []      ()                [] []          |
+     iso_3166           | []  [] []  []  ()                [] [] [] ()    |
+     iso_3166_2         |                ()                               |
+     iso_4217           |     [] []  []  ()                   [] []       |
+     iso_639            | []  [] []  []  ()                [] []          |
+     iso_639_3          | []                                              |
+     jwhois             |                                     []          |
+     kbd                |     [] []  []  []                   []          |
+     keytouch           |        []  []                                   |
+     keytouch-editor    |        []  []                                   |
+     keytouch-keyboa... |        []                                       |
+     klavaro            |     [] []  []                    []             |
+     latrine            |        []  ()                                   |
+     ld                 |        []                           []          |
+     leafpad            |     [] []  []  []                   []    []    |
+     libc               |     [] []  []                       []          |
+     libexif            |        []  []         ()                        |
+     libextractor       |                                                 |
+     libgnutls          |     []                                          |
+     libgpewidget       |        []  []                                   |
+     libgpg-error       |     []     []                                   |
+     libgphoto2         |        []  ()                                   |
+     libgphoto2_port    |        []  ()                             []    |
+     libgsasl           |                                                 |
+     libiconv           |     [] []  []                    []    []       |
+     libidn             |     []     []                    []             |
+     lifelines          |        []  ()                                   |
+     liferea            |     []     []  []                   []    []    |
+     lilypond           |     []     []                       []          |
+     linkdr             |        []  []                       []          |
+     lordsawar          |        []                                       |
+     lprng              |                                                 |
+     lynx               |     [] []  []                          []       |
+     m4                 |     [] []  []  []                               |
+     mailfromd          |                                                 |
+     mailutils          |                                     []          |
+     make               |        []  []                       []          |
+     man-db             |                                                 |
+     man-db-manpages    |                                                 |
+     minicom            |     [] []  []                       []          |
+     mkisofs            |                                                 |
+     myserver           |                                                 |
+     nano               |            []                       []    []    |
+     opcodes            |            []                       []          |
+     parted             |     []     []                                   |
+     pies               |                                                 |
+     popt               |     [] []  []                    [] []          |
+     psmisc             |     []     []                             []    |
+     pspp               |                                     []          |
+     pwdutils           |        []                                       |
+     radius             |                                     []          |
+     recode             |     [] []  []  []                [] []          |
+     rosegarden         |     ()     ()                       ()          |
+     rpm                |        []  []                       []          |
+     rush               |                                                 |
+     sarg               |                                                 |
+     screem             |                                                 |
+     scrollkeeper       |     [] []  []         []            []          |
+     sed                |     []     []  []                [] [] []       |
+     sharutils          |        []  []                       [] []       |
+     shishi             |                                                 |
+     skencil            |        []  ()                       []          |
+     solfege            |            []                    []    []       |
+     solfege-manual     |                                  []    []       |
+     soundtracker       |        []  []                       []          |
+     sp                 |            []                                   |
+     sysstat            |        []  []                             []    |
+     tar                |     []     []                          [] []    |
+     texinfo            |            []                    [] []          |
+     tin                |            []                          []       |
+     unicode-han-tra... |                                                 |
+     unicode-transla... |                                                 |
+     util-linux-ng      |     [] []  []                       []          |
+     vice               |        ()  ()                                   |
+     vmm                |            []                                   |
+     vorbis-tools       |     []                           []             |
+     wastesedge         |        []                                       |
+     wdiff              |            []                       []          |
+     wget               |     []     []                          []       |
+     wyslij-po          |                                                 |
+     xchat              |     []     []  []                   [] []       |
+     xdg-user-dirs      | []  [] []  []  []                [] [] [] []    |
+     xkeyboard-config   | []  [] []  []                    [] []          |
+                        +-------------------------------------------------+
+                          crh cs da  de  el en en_GB en_ZA eo es et eu fa
+                           5  64 105 117 18  1   8     0   28 89 18 19  0
+
+                          fi  fr  ga gl gu he hi hr hu hy id  is it ja ka kn
+                        +----------------------------------------------------+
+     a2ps               | []  []                          []        []       |
+     aegis              |     []                                 []          |
+     ant-phone          |     []                                 []          |
+     anubis             | []  []                          []     []          |
+     aspell             |     []  []                      []     []          |
+     bash               | []  []                          []        []       |
+     bfd                | []  []                          []                 |
+     bibshelf           | []  []  []                      []     []          |
+     binutils           | []  []                          []                 |
+     bison              | []  []  []                      []                 |
+     bison-runtime      | []  []  []                      []     [] []       |
+     bluez-pin          | []  []  []                [] [] []  []    []       |
+     bombono-dvd        | []                                                 |
+     buzztard           |                                 []                 |
+     cflow              | []      []                      []                 |
+     clisp              |     []                                             |
+     coreutils          |     []  []                []    []     []          |
+     cpio               | []  []  []                      []                 |
+     cppi               | []  []                                             |
+     cpplib             | []  []                          []                 |
+     cryptsetup         |     []                          []     []          |
+     dfarc              | []  []                                 []          |
+     dialog             |     []  [] []                   []  [] [] []       |
+     dico               |                                                    |
+     diffutils          | []  []  [] []    []       []    []     [] []       |
+     dink               |     []                                             |
+     doodle             |         []                             []          |
+     e2fsprogs          |     []                          []                 |
+     enscript           |     []  []             []       []                 |
+     exif               | []  []                          []  [] [] []       |
+     fetchmail          |     []                          []     [] []       |
+     findutils          | []  []  []                []    []     []          |
+     flex               | []  []  []                                         |
+     freedink           | []  []                          []                 |
+     gas                |     []                          []                 |
+     gawk               |     []  []       []             []     () []       |
+     gcal               |     []                                             |
+     gcc                |                                 []                 |
+     gettext-examples   | []  []  []                []    []     [] []       |
+     gettext-runtime    | []  []  []                      []     [] []       |
+     gettext-tools      |     []                          []     [] []       |
+     gip                | []  []  [] []                   []        []       |
+     gjay               | []                                                 |
+     gliv               | []  ()                                             |
+     glunarclock        | []      []                []    []                 |
+     gnubiff            |     ()                          []     ()          |
+     gnucash            | ()  ()           ()       ()           () []       |
+     gnuedu             |     []                                 []          |
+     gnulib             | []  []  []                []           [] []       |
+     gnunet             |                                                    |
+     gnunet-gtk         |     []                                             |
+     gnutls             |     []                                 []          |
+     gold               | []                              []                 |
+     gpe-aerial         | []  []                          []                 |
+     gpe-beam           | []  []                          []        []       |
+     gpe-bluetooth      | []                              []     [] []       |
+     gpe-calendar       | []                                        []       |
+     gpe-clock          | []  []                    []    []        []       |
+     gpe-conf           | []  []                          []        []       |
+     gpe-contacts       | []  []                          []        []       |
+     gpe-edit           | []                              []        []       |
+     gpe-filemanager    | []                        []    []        []       |
+     gpe-go             | []  []                    []    []        []       |
+     gpe-login          | []                              []        []       |
+     gpe-ownerinfo      | []  []                    []    []        []       |
+     gpe-package        | []                              []        []       |
+     gpe-sketchbook     | []  []                          []        []       |
+     gpe-su             | []  []     []             []    []        []       |
+     gpe-taskmanager    | []  []                    []    []        []       |
+     gpe-timesheet      | []  []  []                      []        []       |
+     gpe-today          | []  []  [] []             []    []        []       |
+     gpe-todo           | []                              []        []       |
+     gphoto2            | []  []                    []    []     [] []       |
+     gprof              | []  []  []                      []                 |
+     gpsdrive           |            []                   []     []          |
+     gramadoir          |     []  []                      []                 |
+     grep               | []                                     []          |
+     grub               | []                        []    []     []          |
+     gsasl              | []  []  []                      []     []          |
+     gss                | []  []  []                      []     []          |
+     gst-plugins-bad    | []  []                    []    []     [] []       |
+     gst-plugins-base   | []  []                    []    []     [] []       |
+     gst-plugins-good   | []  []                    []    []     [] []       |
+     gst-plugins-ugly   | []  []                    []    []     [] []       |
+     gstreamer          | []  []                    []    []     []          |
+     gtick              | []  []  []                      []     []          |
+     gtkam              |     []                    []    []     [] []       |
+     gtkorphan          |     []                          []     []          |
+     gtkspell           | []  []  [] []             [] [] []     [] []       |
+     gutenprint         | []  []                    []           []          |
+     hello              | []      []                      []                 |
+     help2man           | []  []                                             |
+     hylafax            |                                 []                 |
+     idutils            | []  []  []                []    []     []          |
+     indent             | []  []  [] []             []    []     [] []       |
+     iso_15924          | []  ()                          []     []          |
+     iso_3166           | []  ()  [] [] [] [] [] [] []    []     [] []       |
+     iso_3166_2         |     ()                    []    []     []          |
+     iso_4217           | []  ()                    []    []     [] []       |
+     iso_639            | []  ()  []    []          []    []     [] []    [] |
+     iso_639_3          |     ()                                 []       [] |
+     jwhois             | []  []                    []    []     []          |
+     kbd                |     []                          []                 |
+     keytouch           | []  []  []                []    []     []          |
+     keytouch-editor    | []      []                []    []     []          |
+     keytouch-keyboa... | []      []                []    []     []          |
+     klavaro            |            []             []                       |
+     latrine            | []                              []     []          |
+     ld                 | []  []  []                      []                 |
+     leafpad            | []  []  []       []       []    []     [] ()       |
+     libc               | []  []     []                   []        []       |
+     libexif            |                                        []          |
+     libextractor       |                                                    |
+     libgnutls          |     []                                 []          |
+     libgpewidget       | []      []                      []        []       |
+     libgpg-error       |     []                                 []          |
+     libgphoto2         |     []                                 [] []       |
+     libgphoto2_port    |     []                                 [] []       |
+     libgsasl           | []  []  []                      []     []          |
+     libiconv           | []  []  []                      []     [] []       |
+     libidn             | []  []                          []     []          |
+     lifelines          |     ()                                             |
+     liferea            |     []                    []           [] []       |
+     lilypond           | []  []                                             |
+     linkdr             | []               []    [] []           []          |
+     lordsawar          |                                                    |
+     lprng              |                                 []                 |
+     lynx               |     []                    []    []     [] []       |
+     m4                 | []  []  [] []                   []        []       |
+     mailfromd          |                                                    |
+     mailutils          |     []                          []                 |
+     make               | []  []  [] []    []    []       []     [] []       |
+     man-db             |                                 []     []          |
+     man-db-manpages    |                                 []                 |
+     minicom            | []  []                    []    []        []       |
+     mkisofs            | []  []                          []     []          |
+     myserver           |                                                    |
+     nano               | []  []  [] []             []           []          |
+     opcodes            | []  []  []                      []                 |
+     parted             |     []                          []     [] []       |
+     pies               |                                                    |
+     popt               | []  []  [] []             []    []  [] [] []       |
+     psmisc             | []  []                          []                 |
+     pspp               |                                                    |
+     pwdutils           |     []                          []                 |
+     radius             |     []                          []                 |
+     recode             | []  []  [] []    []       []    []     []          |
+     rosegarden         | ()  ()                          ()     () ()       |
+     rpm                |                                 []        []       |
+     rush               |                                                    |
+     sarg               |     []                                             |
+     screem             |                                        [] []       |
+     scrollkeeper       | []                        []    []     []          |
+     sed                | []  []  [] []             []    []     [] []       |
+     sharutils          | []  []  []                []    []     [] []       |
+     shishi             |     []                                             |
+     skencil            |     []                                             |
+     solfege            | []  []     []                          []          |
+     solfege-manual     |     []     []                                      |
+     soundtracker       |     []                                 []          |
+     sp                 |     []                                    ()       |
+     sysstat            | []  []                          []     [] []       |
+     tar                | []  []  []                []    []     [] []       |
+     texinfo            |     []                          []     [] []       |
+     tin                |     []                                             |
+     unicode-han-tra... |                                                    |
+     unicode-transla... |     []  []                                         |
+     util-linux-ng      | []  []                    []    []     [] []       |
+     vice               |     ()                    ()           ()          |
+     vmm                |     []                                             |
+     vorbis-tools       |                                 []                 |
+     wastesedge         |     ()                                 ()          |
+     wdiff              | []                                                 |
+     wget               | []  []  []             [] []    []     [] []       |
+     wyslij-po          | []  []                          []                 |
+     xchat              | []  []        []    []    []    []     [] []    [] |
+     xdg-user-dirs      | []  []  [] [] [] [] []    []    []  [] [] []    [] |
+     xkeyboard-config   | []  []                    []    []     []          |
+                        +----------------------------------------------------+
+                          fi  fr  ga gl gu he hi hr hu hy id  is it ja ka kn
+                          105 121 53 20  4  8  3  5 53  2 120  5 84 67  0  4
+
+                          ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+                        +-----------------------------------------------+
+     a2ps               |                               []              |
+     aegis              |                                               |
+     ant-phone          |                                               |
+     anubis             |                               []    []        |
+     aspell             |                         []                    |
+     bash               |                                               |
+     bfd                |                                               |
+     bibshelf           |                []             []              |
+     binutils           |                                               |
+     bison              |                               []              |
+     bison-runtime      |       []    [] []             []    []        |
+     bluez-pin          |    [] []    [] []             []              |
+     bombono-dvd        |                                               |
+     buzztard           |                                               |
+     cflow              |                                               |
+     clisp              |                                               |
+     coreutils          |          []                                   |
+     cpio               |                                               |
+     cppi               |                                               |
+     cpplib             |                                               |
+     cryptsetup         |                                               |
+     dfarc              |                   []                          |
+     dialog             |    []       [] []             []    []        |
+     dico               |                                               |
+     diffutils          |                []             []              |
+     dink               |                                               |
+     doodle             |                                               |
+     e2fsprogs          |                                               |
+     enscript           |                                               |
+     exif               |                []                             |
+     fetchmail          |                                               |
+     findutils          |                                               |
+     flex               |                                               |
+     freedink           |                                     []        |
+     gas                |                                               |
+     gawk               |                                               |
+     gcal               |                                               |
+     gcc                |                                               |
+     gettext-examples   |       []       []             [] []           |
+     gettext-runtime    | []                                            |
+     gettext-tools      | []                                            |
+     gip                |                []             []              |
+     gjay               |                                               |
+     gliv               |                                               |
+     glunarclock        |                []                             |
+     gnubiff            |                                               |
+     gnucash            | ()          ()                      ()     () |
+     gnuedu             |                                               |
+     gnulib             |                                               |
+     gnunet             |                                               |
+     gnunet-gtk         |                                               |
+     gnutls             |                               []              |
+     gold               |                                               |
+     gpe-aerial         |                []                             |
+     gpe-beam           |                []                             |
+     gpe-bluetooth      |                []                []           |
+     gpe-calendar       |                []                             |
+     gpe-clock          | []    []       []             [] []           |
+     gpe-conf           | []             []                             |
+     gpe-contacts       | []             []                             |
+     gpe-edit           |                []                             |
+     gpe-filemanager    | []             []                             |
+     gpe-go             | []             []                []           |
+     gpe-login          |                []                             |
+     gpe-ownerinfo      |                []             []              |
+     gpe-package        | []             []                             |
+     gpe-sketchbook     | []             []                             |
+     gpe-su             | []    []       []             [] [] []        |
+     gpe-taskmanager    | [] [] []       []             [] []           |
+     gpe-timesheet      |                []             []              |
+     gpe-today          |       []       []             [] []           |
+     gpe-todo           |                []                   []        |
+     gphoto2            |                                               |
+     gprof              |                               []              |
+     gpsdrive           |                                               |
+     gramadoir          |                                               |
+     grep               |                                               |
+     grub               |                                               |
+     gsasl              |                                               |
+     gss                |                                               |
+     gst-plugins-bad    |             [] []                [] []        |
+     gst-plugins-base   |             [] []                             |
+     gst-plugins-good   |                []                []           |
+     gst-plugins-ugly   |             [] []             [] [] []        |
+     gstreamer          |                                               |
+     gtick              |                                               |
+     gtkam              |                                     []        |
+     gtkorphan          |                []                      []     |
+     gtkspell           |       []    [] []       []    []    [] []     |
+     gutenprint         |                                               |
+     hello              | []             []             []              |
+     help2man           |                                               |
+     hylafax            |                                               |
+     idutils            |                                               |
+     indent             |                                               |
+     iso_15924          |             [] []                             |
+     iso_3166           | [] []       () [] [] []    []       []        |
+     iso_3166_2         |                                               |
+     iso_4217           |             []                      []        |
+     iso_639            |                      []    []                 |
+     iso_639_3          |                            []                 |
+     jwhois             |                []                             |
+     kbd                |                                               |
+     keytouch           |                []                             |
+     keytouch-editor    |                []                             |
+     keytouch-keyboa... |                []                             |
+     klavaro            |                                     []        |
+     latrine            |                []                             |
+     ld                 |                                               |
+     leafpad            | []          [] []                             |
+     libc               | []                                            |
+     libexif            |                                               |
+     libextractor       |                                               |
+     libgnutls          |                               []              |
+     libgpewidget       |                []             []              |
+     libgpg-error       |                                               |
+     libgphoto2         |                                               |
+     libgphoto2_port    |                                               |
+     libgsasl           |                                               |
+     libiconv           |                                               |
+     libidn             |                                               |
+     lifelines          |                                               |
+     liferea            |                                               |
+     lilypond           |                                               |
+     linkdr             |                                               |
+     lordsawar          |                                               |
+     lprng              |                                               |
+     lynx               |                                               |
+     m4                 |                                               |
+     mailfromd          |                                               |
+     mailutils          |                                               |
+     make               | []                                            |
+     man-db             |                                               |
+     man-db-manpages    |                                               |
+     minicom            |                                     []        |
+     mkisofs            |                                               |
+     myserver           |                                               |
+     nano               |                               []    []        |
+     opcodes            |                                               |
+     parted             |                                               |
+     pies               |                                               |
+     popt               | []             []                   []        |
+     psmisc             |                                               |
+     pspp               |                                               |
+     pwdutils           |                                               |
+     radius             |                                               |
+     recode             |                                               |
+     rosegarden         |                                               |
+     rpm                |                                               |
+     rush               |                                               |
+     sarg               |                                               |
+     screem             |                                               |
+     scrollkeeper       |                                     []     [] |
+     sed                |                                               |
+     sharutils          |                                               |
+     shishi             |                                               |
+     skencil            |                                               |
+     solfege            |                                     []        |
+     solfege-manual     |                                               |
+     soundtracker       |                                               |
+     sp                 |                                               |
+     sysstat            |                []                             |
+     tar                |       []                                      |
+     texinfo            |                                     []        |
+     tin                |                                               |
+     unicode-han-tra... |                                               |
+     unicode-transla... |                                               |
+     util-linux-ng      |                                               |
+     vice               |                                               |
+     vmm                |                                               |
+     vorbis-tools       |                                               |
+     wastesedge         |                                               |
+     wdiff              |                                               |
+     wget               |             []                                |
+     wyslij-po          |                                               |
+     xchat              | []             [] []                          |
+     xdg-user-dirs      | [] []       [] [] []       []       [] []     |
+     xkeyboard-config   | []    []    []                                |
+                        +-----------------------------------------------+
+                          ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+                          20  5 10  1 13 48  4  2  2  4 24 10 20  3   1
+
+                          nl  nn or pa pl  ps pt pt_BR ro ru rw sk sl sq sr
+                        +---------------------------------------------------+
+     a2ps               | []           []     []  []   [] []       []    [] |
+     aegis              | []                      []      []                |
+     ant-phone          |                         []   []                   |
+     anubis             | []           []                 []                |
+     aspell             | []                           [] []    [] []       |
+     bash               | []                                    []          |
+     bfd                |                                 []                |
+     bibshelf           | []  []                                            |
+     binutils           |                                 []    []          |
+     bison              | []           []                 []                |
+     bison-runtime      | []           []     []  []   [] []       []       |
+     bluez-pin          | []           []         []   [] []    [] []    [] |
+     bombono-dvd        |     []                          ()                |
+     buzztard           | []  []                                            |
+     cflow              |              []                                   |
+     clisp              | []                              []                |
+     coreutils          | []           []     []  []      []       []       |
+     cpio               | []           []                 []                |
+     cppi               |              []                                   |
+     cpplib             | []                                                |
+     cryptsetup         | []                                                |
+     dfarc              |              []                                   |
+     dialog             | []           []         []      []                |
+     dico               |              []                                   |
+     diffutils          | []           []         []   [] []             [] |
+     dink               | ()                                                |
+     doodle             | []                                          []    |
+     e2fsprogs          | []           []                                   |
+     enscript           | []                      []   [] []       []       |
+     exif               | []           []              [] ()    []          |
+     fetchmail          | []           []                 []          []    |
+     findutils          | []           []     []          []       []       |
+     flex               | []           []         []   [] []                |
+     freedink           | []           []                                   |
+     gas                |                                                   |
+     gawk               | []           []         []   []                   |
+     gcal               |                                                   |
+     gcc                |                                                [] |
+     gettext-examples   | []           []     []       [] []    [] []    [] |
+     gettext-runtime    | []  []       []     []       [] []    [] []    [] |
+     gettext-tools      |              []              [] []    [] []    [] |
+     gip                | []           []                 []    []       [] |
+     gjay               |                                                   |
+     gliv               | []           []         []   [] []    []          |
+     glunarclock        | []                      []   []       []       [] |
+     gnubiff            | []                           ()                   |
+     gnucash            | []           ()         ()      ()                |
+     gnuedu             | []                                                |
+     gnulib             | []           []                 []       []       |
+     gnunet             |                                                   |
+     gnunet-gtk         |                                                   |
+     gnutls             | []           []                                   |
+     gold               |                                                   |
+     gpe-aerial         | []                  []  []   [] []       []    [] |
+     gpe-beam           | []                  []  []   [] []       []    [] |
+     gpe-bluetooth      | []                      []                        |
+     gpe-calendar       |                         []      []       []    [] |
+     gpe-clock          | []                  []  []   [] []    [] []    [] |
+     gpe-conf           | []                  []  []   [] []    [] []       |
+     gpe-contacts       |                         []   [] []       []    [] |
+     gpe-edit           | []           []                          []       |
+     gpe-filemanager    | []                              []       []       |
+     gpe-go             | []           []         []   [] []    [] []    [] |
+     gpe-login          | []                      []                        |
+     gpe-ownerinfo      | []                  []  []   [] []    [] []    [] |
+     gpe-package        | []                                       []       |
+     gpe-sketchbook     | []                  []  []   [] []       []    [] |
+     gpe-su             | []                  []  []   [] []    [] []    [] |
+     gpe-taskmanager    | []                  []  []   [] []    [] []    [] |
+     gpe-timesheet      | []                  []  []   [] []    [] []    [] |
+     gpe-today          | []                  []  []   [] []    [] []    [] |
+     gpe-todo           | []                      []      []       []    [] |
+     gphoto2            | []        [] []         []   [] []    []       [] |
+     gprof              | []                      []   []                   |
+     gpsdrive           | []                              []                |
+     gramadoir          | []                                    []          |
+     grep               | []           []                 []    []          |
+     grub               | []           []                 []                |
+     gsasl              | []           []                       []       [] |
+     gss                |              []              []       []          |
+     gst-plugins-bad    | []           []         []      []    []    []    |
+     gst-plugins-base   | []           []         []      []    []          |
+     gst-plugins-good   | []           []         []      []    []          |
+     gst-plugins-ugly   | []           []         []      []    [] []       |
+     gstreamer          | []           []         []      []    []          |
+     gtick              | []                              []    []          |
+     gtkam              | []        [] []         []      []    []          |
+     gtkorphan          | []                                                |
+     gtkspell           | []           []     []  []   [] []    [] [] [] [] |
+     gutenprint         | []                              []                |
+     hello              | []           []                       [] []       |
+     help2man           |              []                 []                |
+     hylafax            | []                                                |
+     idutils            | []           []         []   [] []                |
+     indent             | []           []         []   [] []    []       [] |
+     iso_15924          | []           []                 []       []       |
+     iso_3166           | []  [] [] [] []     ()  []   [] [] [] [] [] [] [] |
+     iso_3166_2         | []           []                          []       |
+     iso_4217           | []  []       []     []          [] []    []    [] |
+     iso_639            | []     [] [] []                 [] [] [] []    [] |
+     iso_639_3          |        [] []                                      |
+     jwhois             | []           []         []   []                   |
+     kbd                | []           []              []                   |
+     keytouch           | []           []                       []          |
+     keytouch-editor    | []           []                       []          |
+     keytouch-keyboa... | []           []                       []          |
+     klavaro            | []                      []                        |
+     latrine            |              []                 []                |
+     ld                 |                                                   |
+     leafpad            | []  []       []     []  []      []    [] []    [] |
+     libc               | []           []                 []    []          |
+     libexif            | []           []         ()            []          |
+     libextractor       |                                                   |
+     libgnutls          | []           []                                   |
+     libgpewidget       | []           []                          []       |
+     libgpg-error       |              []              []                   |
+     libgphoto2         | []           []                                   |
+     libgphoto2_port    | []           []         []      []    []          |
+     libgsasl           | []           []              []       []       [] |
+     libiconv           | []           []                       [] []    [] |
+     libidn             | []           []                                   |
+     lifelines          | []           []                                   |
+     liferea            | []           []     []  []   [] ()    ()    []    |
+     lilypond           | []                                                |
+     linkdr             | []                  []          []                |
+     lordsawar          |                                                   |
+     lprng              |              []                                   |
+     lynx               | []                      []      []                |
+     m4                 | []           []         []   [] []                |
+     mailfromd          |              []                                   |
+     mailutils          |              []                                   |
+     make               | []           []         []      []                |
+     man-db             | []           []                 []                |
+     man-db-manpages    | []           []                 []                |
+     minicom            |              []         []   [] []                |
+     mkisofs            | []           []                 []                |
+     myserver           |                                                   |
+     nano               | []           []         []      []                |
+     opcodes            | []                           []                   |
+     parted             | []           []                 []    []          |
+     pies               |              []                                   |
+     popt               | []           []     []          []                |
+     psmisc             | []           []                 []                |
+     pspp               | []                      []                        |
+     pwdutils           |              []                                   |
+     radius             | []           []                 []                |
+     recode             | []           []     []  []   [] []    [] []       |
+     rosegarden         |              ()                 ()                |
+     rpm                | []           []     []                            |
+     rush               | []           []                                   |
+     sarg               |                                                   |
+     screem             |                                                   |
+     scrollkeeper       | []  []       []              [] []    []    [] [] |
+     sed                | []           []     []  []   [] []    [] []    [] |
+     sharutils          | []           []                 []             [] |
+     shishi             |              []                                   |
+     skencil            |                     []  []                        |
+     solfege            | []           []         []      []                |
+     solfege-manual     | []           []         []                        |
+     soundtracker       |                                       []          |
+     sp                 |                                                   |
+     sysstat            | []           []         []      []                |
+     tar                | []           []                 []       []       |
+     texinfo            | []           []              [] []                |
+     tin                |                                 []                |
+     unicode-han-tra... |                                                   |
+     unicode-transla... |                                                   |
+     util-linux-ng      | []           []         []      []       []       |
+     vice               | []                                                |
+     vmm                | []                                                |
+     vorbis-tools       | []           []                                   |
+     wastesedge         | []                                                |
+     wdiff              | []           []                                   |
+     wget               | []           []     []  []      []    [] []       |
+     wyslij-po          | []  []       []                                   |
+     xchat              | []        [] []     []          []    [] [] [] [] |
+     xdg-user-dirs      | []  [] [] [] []  [] []  []   [] []    [] [] [] [] |
+     xkeyboard-config   | []           []                 []                |
+                        +---------------------------------------------------+
+                          nl  nn or pa pl  ps pt pt_BR ro ru rw sk sl sq sr
+                          135 10  4  7 105  1 29  62   47 91  3 54 46  9 37
+
+                          sv  sw ta te tg th tr uk vi  wa zh_CN zh_HK zh_TW
+                        +---------------------------------------------------+
+     a2ps               | []              [] [] [] []                       | 27
+     aegis              |                          []                       |  9
+     ant-phone          | []                 []    []      []               |  9
+     anubis             | []                 [] [] []                       | 15
+     aspell             |                       [] []  []                   | 20
+     bash               | []                    [] []                       | 12
+     bfd                |                          []                       |  6
+     bibshelf           | []                       []      []               | 16
+     binutils           |                       [] []                       |  8
+     bison              | []                       []                       | 12
+     bison-runtime      | []              []    [] []      []          []   | 29
+     bluez-pin          | []              [] [] [] []  []  []          []   | 37
+     bombono-dvd        |                          []                       |  4
+     buzztard           |                          []                       |  7
+     cflow              |                       [] []      []               |  9
+     clisp              |                                                   | 10
+     coreutils          | []                    [] []      []               | 22
+     cpio               | []                 [] [] []      []          []   | 13
+     cppi               |                       [] []                       |  5
+     cpplib             | []                 [] [] []      []          []   | 14
+     cryptsetup         | []                       []                       |  7
+     dfarc              |                          []                       |  9
+     dialog             | []  []          []       []  []  []          []   | 30
+     dico               |                       []                          |  2
+     diffutils          | []                 [] [] []      []          []   | 30
+     dink               |                                                   |  4
+     doodle             | []                       []                       |  7
+     e2fsprogs          | []                 []    []                       | 11
+     enscript           | []                 [] [] []                       | 17
+     exif               | []                       []      []               | 16
+     fetchmail          |                    []    []      []               | 17
+     findutils          | []                 [] [] []      []               | 20
+     flex               | []                 []    []                  []   | 15
+     freedink           |                          []                       | 10
+     gas                |                    []                             |  4
+     gawk               | []                 []    []      []               | 18
+     gcal               | []                 []                             |  5
+     gcc                | []                 []            []               |  7
+     gettext-examples   | []                 [] [] []      []    []    []   | 34
+     gettext-runtime    | []                 [] [] []      []    []    []   | 29
+     gettext-tools      | []                 [] [] []      []          []   | 22
+     gip                | []                       []      []          []   | 22
+     gjay               |                          []                       |  3
+     gliv               | []                 []    []                       | 14
+     glunarclock        | []                       []  []  []          []   | 19
+     gnubiff            | []                       []                       |  4
+     gnucash            |                    () [] ()      []          ()   | 10
+     gnuedu             |                          []                  []   |  7
+     gnulib             | []                    [] []      []               | 16
+     gnunet             |                          []                       |  1
+     gnunet-gtk         | []                 []    []                       |  5
+     gnutls             | []                       []      []               | 10
+     gold               |                          []                       |  4
+     gpe-aerial         | []                       []      []               | 18
+     gpe-beam           | []                       []      []               | 19
+     gpe-bluetooth      | []                       []      []               | 13
+     gpe-calendar       | []                       []  []  []               | 12
+     gpe-clock          | []                 []    []  []  []               | 28
+     gpe-conf           | []                       []  []  []               | 20
+     gpe-contacts       | []                       []      []               | 17
+     gpe-edit           | []                       []      []               | 12
+     gpe-filemanager    | []                       []  []  []               | 16
+     gpe-go             | []                 []    []  []  []               | 25
+     gpe-login          | []                       []      []               | 11
+     gpe-ownerinfo      | []                 []    []      []          []   | 25
+     gpe-package        | []                       []      []               | 13
+     gpe-sketchbook     | []                       []      []               | 20
+     gpe-su             | []                 []    []  []  []               | 30
+     gpe-taskmanager    | []                 []    []  []  []               | 29
+     gpe-timesheet      | []                 []    []      []          []   | 25
+     gpe-today          | []                 []    []  []  []          []   | 30
+     gpe-todo           | []                       []  []  []               | 17
+     gphoto2            | []                    [] []      []          []   | 24
+     gprof              | []                 []    []                       | 15
+     gpsdrive           | []                       []      []               | 11
+     gramadoir          | []                       []      []               | 11
+     grep               |                 []       []      []               | 10
+     grub               | []                       []      []               | 14
+     gsasl              | []                       []      []          []   | 14
+     gss                | []                       []      []               | 11
+     gst-plugins-bad    | []                 []    []      []               | 26
+     gst-plugins-base   | []                 [] [] []      []               | 24
+     gst-plugins-good   | []                 []    []      []               | 24
+     gst-plugins-ugly   | []                 [] [] []      []               | 29
+     gstreamer          | []                    [] []      []               | 22
+     gtick              |                       [] []      []               | 13
+     gtkam              | []                       []      []               | 20
+     gtkorphan          | []                       []      []               | 14
+     gtkspell           | []              [] [] [] []  []  []    []    []   | 45
+     gutenprint         | []                                                | 10
+     hello              | []              [] []    []      []          []   | 21
+     help2man           | []                       []                       |  7
+     hylafax            |                          []                       |  5
+     idutils            | []                 []    []      []               | 17
+     indent             | []                 [] [] []      []          []   | 30
+     iso_15924          |                 ()    [] ()      []          []   | 16
+     iso_3166           | []        []    () [] [] ()  []  []    []    ()   | 53
+     iso_3166_2         |                 ()    [] ()      []               |  9
+     iso_4217           | []              () [] [] ()      []    []         | 26
+     iso_639            | []     [] []    ()    [] ()  []  []    []    []   | 38
+     iso_639_3          |        []                ()                       |  8
+     jwhois             | []                 []    []      []          []   | 16
+     kbd                | []                 [] [] []      []               | 15
+     keytouch           | []                       []      []               | 16
+     keytouch-editor    | []                       []      []               | 14
+     keytouch-keyboa... | []                       []      []               | 14
+     klavaro            |                          []                       | 11
+     latrine            |                    []    []      []               | 10
+     ld                 | []                 []    []                  []   | 11
+     leafpad            | []                 [] [] []      []          []   | 33
+     libc               | []                 []    []      []          []   | 21
+     libexif            |                          []      ()               |  7
+     libextractor       |                          []                       |  1
+     libgnutls          | []                       []      []               |  9
+     libgpewidget       | []                       []      []               | 14
+     libgpg-error       | []                       []      []               |  9
+     libgphoto2         |                       [] []                       |  8
+     libgphoto2_port    | []                    [] []                  []   | 14
+     libgsasl           | []                       []      []               | 13
+     libiconv           | []                       []  []  []               | 21
+     libidn             | ()                       []      []               | 11
+     lifelines          | []                                                |  4
+     liferea            | []                 []            []               | 21
+     lilypond           |                          []                       |  7
+     linkdr             | []                 []    []      []          []   | 17
+     lordsawar          |                                                   |  1
+     lprng              |                          []                       |  3
+     lynx               | []                 [] [] []                       | 17
+     m4                 | []                       []      []          []   | 19
+     mailfromd          |                       [] []                       |  3
+     mailutils          |                          []                       |  5
+     make               | []                 []    []      []               | 21
+     man-db             | []                       []      []               |  8
+     man-db-manpages    |                                                   |  4
+     minicom            | []                       []                       | 16
+     mkisofs            |                          []      []               |  9
+     myserver           |                                                   |  0
+     nano               | []                       []      []          []   | 21
+     opcodes            | []                 []    []                       | 11
+     parted             | []                 [] [] []                  []   | 15
+     pies               |                       [] []                       |  3
+     popt               | []              [] []    []      []          []   | 27
+     psmisc             | []                       []                       | 11
+     pspp               |                                                   |  4
+     pwdutils           | []                       []                       |  6
+     radius             |                       [] []                       |  9
+     recode             | []                 []    []      []               | 28
+     rosegarden         | ()                                                |  0
+     rpm                | []                       []                  []   | 11
+     rush               |                       [] []                       |  4
+     sarg               |                                                   |  1
+     screem             |                          []                       |  3
+     scrollkeeper       | []                 [] [] []                  []   | 27
+     sed                | []                 []    []      []          []   | 30
+     sharutils          | []                 []    []      []          []   | 22
+     shishi             |                          []                       |  3
+     skencil            | []                       []                       |  7
+     solfege            | []                 []    []      []               | 16
+     solfege-manual     |                    []                             |  8
+     soundtracker       | []                 []    []                       |  9
+     sp                 |                    []                             |  3
+     sysstat            |                          []      []               | 15
+     tar                | []                 [] [] []      []          []   | 23
+     texinfo            | []                 [] [] []      []               | 17
+     tin                |                                                   |  4
+     unicode-han-tra... |                                                   |  0
+     unicode-transla... |                                                   |  2
+     util-linux-ng      | []                 [] [] []                       | 20
+     vice               | ()                 ()                             |  1
+     vmm                |                          []                       |  4
+     vorbis-tools       |                          []                       |  6
+     wastesedge         |                                                   |  2
+     wdiff              | []                       []                       |  7
+     wget               | []                 []    []      []          []   | 26
+     wyslij-po          |                       [] []                       |  8
+     xchat              | []              []    [] []      []          []   | 36
+     xdg-user-dirs      | []     [] []    [] [] [] []      []    []    []   | 63
+     xkeyboard-config   | []                    [] []                       | 22
+                        +---------------------------------------------------+
+       85 teams           sv  sw ta te tg th tr uk vi  wa zh_CN zh_HK zh_TW
+      178 domains         119  1  3  3  0 10 65 51 155 17  98     7    41    2618
+
+   Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect.  This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+   For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer.  There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+   If June 2010 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites.  The most up-to-date
+matrix with full percentage details can be found at
+`http://translationproject.org/extra/matrix.html'.
+
+1.5 Using `gettext' in new packages
+===================================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package.  Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library.  This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+   Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations.  The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project.  Therefore the information given above
+applies also for every other Free Software Project.  Contact
+`coordinator@translationproject.org' to make the `.pot' files available
+to the translation teams.
+
diff --git a/AUTHORS b/AUTHORS
new file mode 100644
index 0000000..93b3528
--- /dev/null
+++ b/AUTHORS
@@ -0,0 +1,16 @@
+
+In 2001, Will Estes took over as maintainer of flex.
+
+John Millaway is a co-author of the current version of flex. He has
+contributed a large number of new features, fixed a large number of
+outstanding bugs and has made significant contributions to the flex
+documentation.
+
+Aaron Stone has contributed several bug fixes to the flex codebase.
+
+Vern Paxson wrote flex with the help of many ideas and much
+inspiration from Van Jacobson.  Original version by Jef Poskanzer.
+
+The fast table representation is a partial implementation of a design
+done by Van Jacobson.  The implementation was done by Kevin Gong and
+Vern Paxson.
diff --git a/COPYING b/COPYING
new file mode 100644
index 0000000..684b011
--- /dev/null
+++ b/COPYING
@@ -0,0 +1,42 @@
+Flex carries the copyright used for BSD software, slightly modified
+because it originated at the Lawrence Berkeley (not Livermore!) Laboratory,
+which operates under a contract with the Department of Energy:
+
+Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007 The Flex Project.
+
+Copyright (c) 1990, 1997 The Regents of the University of California.
+All rights reserved.
+
+This code is derived from software contributed to Berkeley by
+Vern Paxson.
+
+The United States Government has rights in this work pursuant
+to contract no. DE-AC03-76SF00098 between the United States
+Department of Energy and the University of California.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+Neither the name of the University nor the names of its contributors
+may be used to endorse or promote products derived from this software
+without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.
+
+This basically says "do whatever you please with this software except
+remove this notice or take advantage of the University's (or the flex
+authors') name".
+
+Note that the "flex.skl" scanner skeleton carries no copyright notice.
+You are free to do whatever you please with scanners generated using flex;
+for them, you are not even bound by the above copyright.
diff --git a/ChangeLog b/ChangeLog
new file mode 100644
index 0000000..c6fecf8
--- /dev/null
+++ b/ChangeLog
@@ -0,0 +1,9721 @@
+2016-03-01  Will Estes <westes575@gmail.com>
+
+	* NEWS: Mention 2.6.1 release date
+
+2016-02-28  rlar <rlar>
+
+	* src/gen.c: avoid warning, add (int) cast to the read() return
+	value For similiarity with the fread() case.
+
+2016-02-28  rlar <rlar>
+
+	* src/scan.l: avoid warning, POSIX says yyless() has an `int'
+	argument
+
+2016-02-29  rlar <rlar>
+
+	* src/filter.c: use type size_t in filter_tee_header() to avoid
+	warnings
+
+2016-02-29  rlar <rlar>
+
+	* src/filter.c, src/misc.c, src/scanopt.c, src/tables.c: add
+	(size_t) casts to malloc invocations to prevent warnings
+
+2016-02-29  rlar <rlar>
+
+	* src/buf.c, src/misc.c, src/scan.l, src/scanopt.c, src/tables.c: 
+	add (int) casts to some strlen() invocations to prevent warnings
+
+2016-02-29  rlar <rlar>
+
+	* src/flexdef.h, src/scan.l, src/sym.c: ndlookup(), char *, to get
+	rid of casts and warnings
+
+2016-02-28  rlar <rlar>
+
+	* src/flexdef.h, src/scan.l, src/sym.c: ndinstal(), char *, to get
+	rid of casts and warnings
+
+2016-02-28  rlar <rlar>
+
+	* src/flexdef.h, src/scan.l, src/sym.c: cclinstal() and ccllookup(),
+	char *, to get rid of casts and warnings
+
+2016-02-28  rlar <rlar>
+
+	* src/gen.c: warning: redundant redeclaration of
+	‘gen_next_state’ [-Wredundant-decls]
+
+2016-02-28  rlar <rlar>
+
+	* src/gen.c: warning: no previous prototype for ‘mkecstbl’
+	[-Wmissing-prototypes]
+
+2016-02-28  rlar <rlar>
+
+	* src/main.c: warning: suggest parentheses around assignment used as
+	truth value [-Wparentheses]
+
+2016-02-28  rlar <rlar>
+
+	* src/flexdef.h: warning: redundant redeclaration of ‘yywrap’
+	[-Wredundant-decls]
+
+2016-02-28  rlar <rlar>
+
+	* src/flexdef.h: warning: redundant redeclaration of ‘yylval’
+	[-Wredundant-decls]
+
+2016-02-28  rlar <rlar>
+
+	* src/flexdef.h: warning: redundant redeclaration of ‘yyin’
+	[-Wredundant-decls]
+
+2016-02-28  rlar <rlar>
+
+	* src/flexdef.h, src/main.c: warning: redundant redeclaration of
+	‘yyparse’ [-Wredundant-decls]
+
+2016-02-28  rlar <rlar>
+
+	* src/parse.y, src/scan.l, src/yylex.c, to.do/unicode/scan.l: 
+	unification, rename some more rename these too for improved similiarity:   OPTION_OP OPT_HEADER OPT_EXTRA_TYPE OPT_TABLES
+
+2016-02-28  rlar <rlar>
+
+	* src/parse.y, src/scan.l, src/yylex.c, to.do/unicode/scan.l: fix
+	name clash, OPT_OUTFILE from parse.y and from options.h these collide:   OPT_OUTFILE OPT_PREFIX OPT_YYCLASS rename them TOK_... in the
+	parser
+
+2016-02-28  Will Estes <westes575@gmail.com>
+
+	* lib/reallocarray.c: Prototyped reallocarray implementation
+
+2016-02-28  Will Estes <westes575@gmail.com>
+
+	* src/scanopt.c: Removed custom strcasecmp() function
+
+2016-02-28  rlar <rlar>
+
+	* src/flex.skl: fwrite wants a size_t, yyleng is int per posix
+
+2016-02-28  rlar <rlar>
+
+	* src/scanopt.c: Remove some unneeded casts
+
+2016-02-28  rlar <rlar>
+
+	* src/flexdef.h: warning: negative integer implicitly converted to
+	unsigned type [-Wsign-conversion]
+
+2016-02-27  rlar <rlar>
+
+	* src/dfa.c, src/parse.y: dfa.c:157:24: warning: conversion to
+	'size_t' from 'int' may change the sign of the result
+	[-Wsign-conversion] most certainly safe cast
+
+2016-02-27  rlar <rlar>
+
+	* src/ccl.c: ccl.c:86:19: warning: conversion to 'unsigned char'
+	from 'int' may alter its value [-Wconversion] ch seems to have been checked for proper range some lines above
+
+2016-02-27  rlar <rlar>
+
+	* tests/bison_nr_parser.y: warning: deprecated directive, use
+	'%pure-parser' [-Wdeprecated]
+
+2016-02-27  rlar <rlar>
+
+	* lib/lib.c: warning: no previous prototype for 'do_nothing'
+	[-Wmissing-prototypes]
+
+2016-02-27  rlar <rlar>
+
+	* src/libmain.c: included stdlib.h header
+
+2016-02-27  Will Estes <westes575@gmail.com>
+
+	* NEWS: Described more post v2.6.0 changes
+
+2016-02-27  Will Estes <westes575@gmail.com>
+
+	* configure.ac: build: Removed bzip2 distribiution archive
+
+2016-02-27  Will Estes <westes575@gmail.com>
+
+	* configure.ac: removed obsolete program check
+
+2016-02-27  Will Estes <westes575@gmail.com>
+
+	* configure.ac: Made some program checks more robust
+
+2016-02-27  rlar <rlar>
+
+	* src/flex.skl: Remove unneeded cast to int
+
+2016-02-27  Will Estes <westes575@gmail.com>
+
+	* src/flex.skl: Fixed incorrect integer type
+
+2016-02-27  Will Estes <westes575@gmail.com>
+
+	* src/flex.skl: Fix more integer types, resolves sf 184, 187
+
+2016-02-26  Robert Larice <Robert.Larice@t-online.de>
+
+	* src/flex.skl, src/gen.c: Removed some type conversion warnings
+
+2016-02-26  Will Estes <westes575@gmail.com>
+
+	* src/flex.skl: Changed another buffer size to int; resolves gh#61
+
+2016-02-24  Will Estes <westes575@gmail.com>
+
+	* src/flex.skl: Changed type of yy_n_chars to int; gh#53, sf#160.  The variable yy_n_chars had been of type yy_size_t which is
+	incorrect given its use in read(). While it might be adviseable to
+	look at defining a yy_ssize_t, there might be some issues doing this
+	and so, for now, at least, we'll punt back to int.
+
+2016-02-24  Will Estes <westes575@gmail.com>
+
+	* src/buf.c: Fixed size of bufferallocation, resolved gh#54.  The value of n_alloc was a count, not a size. Multiplying the value
+	by the element size was incorrect. That multiplication was already
+	being done and having it done twice was incorrect.
+
+2016-02-23  Tobias Klauser <tklauser@distanz.ch>
+
+	* src/scan.l: Allow '%option noline' in flex input file, resolves
+	gh#56.  Allow specifying '%option noline' in the input file, leading to the
+	same effect as calling flex with the command line option --noline.  Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
+
+2016-02-23  Tobias Klauser <tklauser@distanz.ch>
+
+	* src/buf.c, src/main.c: Emit no #line directives if gen_line_dirs
+	is false, resolves igh#55.  There are two instances in the code which will print a #line
+	directive to the resulting lexer, regardless of the value of
+	gen_line_dirs. Fix them, so they also respect gen_line_dirs.  Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
+
+2016-02-16  Tobias Klauser <tklauser@distanz.ch>
+
+	* lib/lib.c, src/gen.c, src/misc.c, src/scan.l: Converted K&R style
+	function definitions to ANSI C style Consistently make use of the ANSI C function definition style
+	instead of the K&R style.
+
+2016-01-29  Tobias Klauser <tklauser@distanz.ch>
+
+	* src/flex.skl: Used NULL constant instead of plain integer for NULL
+	pointer.  The sparse static checker warns about using plain integer 0 as NULL
+	pointers in the generated lexer code. Fix this by using NULL
+	consistently for pointers.
+
+2016-01-29  Tobias Klauser <tklauser@distanz.ch>
+
+	* src/flex.skl: Marked declaration and definition of yy_fatal_error
+	as noreturn.  Only the declaration of yy_fatal_error is marked with
+	__attribute__((__noreturn__)) in case GCC >= 3 is used, but not the
+	definition. This leads to the sparse static checker to complain
+	about function declaration mismatch.  Fix it by defining a macro yynoreturn and using it for both the
+	declaration and the definition of yy_fatal_error.
+
+2016-01-27  Tobias Klauser <tklauser@distanz.ch>
+
+	* src/flex.skl: Fixed declaration mismatch in yy_fatal_error.  The prototype declares yy_fatal_error parameter as "const char
+	msg[]" while the definition uses "const char* msg" (introduced by
+	commit e9d5fc713f61b) which causes the sparse static checkers to
+	produce an error.  Fix this by adjusting the definition to use "const char* msg" as
+	well.  Also change the C++ version accordingly so it matches the
+	declaration in FlexLexer.hpp.
+
+2016-01-23  Will Estes <westes575@gmail.com>
+
+	* CODE_OF_CONDUCT.md: flex is for flex #NCoC
+
+2016-01-18  Will Estes <westes575@gmail.com>
+
+	* doc/flex.texi: Referred to github for issue tracking, no longer sf
+
+2016-01-10  Egor Pugin <egor.pugin@gmail.com>
+
+	* tests/reject.l4, tests/tableopts.l4: Opened files in binary mode
+	explicitly
+
+2016-01-08  OBATA Akio <obache@NetBSD.org>
+
+	* src/Makefile.am: Linked flex binary against libintl, not libfl.   Signed-off-by: Thomas Klausner <wiz@NetBSD.org>
+
+2016-01-08  Michael van Elst <mlelstv@NetBSD.org>
+
+	* src/filter.c: Improved pipe-stdin hack behavior; resolves sf#198.  Signed-off-by: Thomas <Klausner wiz@NetBSD.org>
+
+2015-12-27  Will Estes <westes575@gmail.com>
+
+	* configure.ac, src/flexdef.h: Removed no longer needed header
+	checks
+
+2015-12-27  Will Estes <westes575@gmail.com>
+
+	* configure.ac: Checked for reallocarray() with AC_REPLACE_FUNCS
+
+2015-12-27  Will Estes <westes575@gmail.com>
+
+	* src/flexdef.h, src/main.c: include libgen.h from flexdef.h, not
+	main.c
+
+2015-12-25  Michael Reed <m.reed@mykolab.com>
+
+	* src/main.c: Replace basename2() with basename(3).  Given the following program: 	\#include <libgen.h> 	\#include <stdio.h> 	/* extracts basename from path, optionally stripping the extension
+		 "\.*" * (same concept as /bin/sh `basename`, but different handling
+		of extension). */ static char *basename2 (char *path) 	{ 		char   *b; 		for (b = path; *path; path++) 			if (*path == '/') 				b = path + 1; 		return b; 	} 	static void basename_compare(char *path) 	{ 		printf("basename: %s\n", basename(path)); 		printf("basename2: %s\n\n", basename2(path)); 	} 	int main (int argc, char *argv[]) 	{ 		// From http://pubs.opengroup.org/onlinepubs/9699919799/ 		// ``Sample Input and Output Strings'' 		basename_compare("/usr/lib"); 		basename_compare("/usr/"); 		basename_compare("/"); 		basename_compare("///"); 		basename_compare("//usr//lib//"); 		return 0; 	} ... and the program's output: 	basename: lib 	basename2: lib 	basename: usr 	basename2: 	basename: / 	basename2: 	basename: / 	basename2: 	basename: lib 	basename2: ... we can see that basename2() behaves the same as basename(3) in
+	the average use case, but messes up pretty severely in others.
+	Besides that, basename(3) is mandated by POSIX so should be present
+	on modern Unix-like systems, so we shouldn't define it ourselves.  Some notes: - it doesn't appear to be mentioned in POSIX, but OpenBSD's
+	  basename(3) returns NULL if the returned path componenet is >
+	  PATH_MAX, so add a check for that - basename(3) shouldn't return an empty string, so remove the   program_name[0] != '\0' check
+
+2015-12-25  Michael Reed <m.reed@mykolab.com>
+
+	* src/main.c: Simplify basename2().  It's only call site does not activate the `strip_ext` code path, so
+	the function can be simplified a lot.  While here, remove a double
+	assignment.
+
+2015-12-25  Michael Reed <m.reed@mykolab.com>
+
+	* src/flex.skl, src/misc.c: Cleaned up __STDC__ #ifdefs.  Assuming a compiler conforming to the ISO C standard is used, i.e.,
+	__STDC__ is defined to 1, YY_USE_CONST is always defined and can be
+	eliminated.
+
+2015-12-25  Michael Reed <m.reed@mykolab.com>
+
+	* src/flexdef.h, src/main.c, src/scanopt.c, src/scanopt.h,
+	src/sym.c: Remove remaining use of PROTO
+
+2015-12-21  Serguey Parkhomovsky <xindigo@gmail.com>
+
+	* src/buf.c: buf.c: use snprintf
+
+2015-12-19  Will Estes <westes575@gmail.com>
+
+	* configure.ac: build: reformatted AC_CHECK_FUNCS for readability
+
+2015-12-17  Will Estes <westes575@gmail.com>
+
+	* src/scanopt.c: correct function prototype
+
+2015-12-15  Michael Reed <m.reed@mykolab.com>
+
+	* src/main.c, src/scanopt.c, src/sym.c, src/tblcmp.c: Remove more
+	instances of PROTO
+
+2015-12-15  Michael Reed <m.reed@mykolab.com>
+
+	* src/main.c: Removed prototype for main().  It's not called anywhere else so the prototype is not needed.  See
+	the C99 standard [1], section 5.1.2.2.1 for more info.  [1]: http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf
+
+2015-12-13  Michael McConville <mmcco@mykolab.com>
+
+	* src/dfa.c, src/gen.c, src/nfa.c, to.do/unicode/main.c,
+	to.do/unicode/tblcmp.c: Removed more instances of PROTO, ansifying.
+
+2015-12-13  Will Estes <westes575@gmail.com>
+
+	* README: Noted github for issue tracking and pull requests
+
+2015-12-13  Michael McConville <mmcco@mykolab.com>
+
+	* README: Reformatted README; removed sf bug tracking link.
+
+2015-12-13  Michael McConville <mmcco@mykolab.com>
+
+	* src/gen.c, to.do/unicode/gen.c: Removed macros for indentation
+	level.  Just increment or decrement the indentation counter. That's less to
+	remember and makes the code more readable.  w# Please enter the commit message for your changes. Lines starting
+
+2015-12-12  Mike Frysinger <vapier@gentoo.org>
+
+	* tests/Makefile.am, tests/testwrapper.sh: tests: fixed paths to
+	input files.  The current test wrapper works only when the inputs are specified
+	using relative paths.  If they're specified with absolute paths, the
+	driver fails to detect the inputs because it always prepends the
+	input dir name which itself is a relative path: $ cd tests $
+	./testwrapper.sh -d . -i $PWD/reject.txt -t ./reject_ver.table
+	<fails to open inputs> This normally doesn't show up because people run `./configure` or,
+	for out of tree builds, `../configure`.  But if you happen to run
+	configure with an absolute path, then automake tends to generate
+	absolute paths as well leading to test failures.  Fix all of this by dropping the implicit input directory prepending.  - INPUT_NAME is often a list of files, not just a single one - the input directory is used to find the testname tables which are   usually generated, so it's impossible to use files from both
+	  source and build directories - most of the time, the full/correct path is already specified
+
+2015-12-12  Mike Frysinger <vapier@gentoo.org>
+
+	* configure.ac: configure: fixed realloc test.  The [] characters are used for quoting in m4, so the attempt to use
+	them in place of `test` fails yielding the warning at build time: .../flex/configure: line 20222: no: command not found
+
+2015-12-12  Michael McConville <mmcco@mykolab.com>
+
+	* src/flexdef.h: Started removal of PROTO macro.  The PROTO macro is no longer needed. Additionally, its usage is
+	inconsistent, so we began removing it.
+
+2015-12-12  Michael Reed <m.reed@mykolab.com>
+
+	* Makefile.am, src/main.c: Removed SHORT_FILE_NAMES preprocessor
+	symbol.  As a relic of MS-DOS, we don't need this.  It's never defined; see 13b5b214f53d1c3354a7ab910bd160c126df1331.  Removed additional MSDOS ifdef.
+
+2015-12-11  Michael McConville <mmcco@mykolab.com>
+
+	* configure.ac, lib/reallocarray.c, src/flexdef.h: Added new
+	function reallocarray.  This is taken from OpenSSH Portable, which in turn takes it from
+	OpenBSD.  reallocarray wraps the stdlib's realloc function. It takes two size
+	arguments and checks for overflow, like calloc, but doesn't zero the
+	memory. Therefore, it allows us to do overflow-safe array
+	reallocations and overflow-safe unzeroed array allocations, which
+	the stdlib allocation functions don't.  We have a bunch of specific array allocation macros, none of which
+	check for overflow. reallocarray should be able to replace them.
+
+2015-12-11  Michael McConville <mmcco@mykolab.com>
+
+	* src/flexdef.h: Removed MS-DOS, VMS macros.  Given the age of the MS-DOS and VMS platforms, it's likely that no
+	one is building flex on them any more. Additionally, the preferred
+	approach is to test for particular platform features rather than to
+	test for particular platforms.
+
+2015-12-12  Will Estes <westes575@gmail.com>
+
+	* src/flexdef.h, src/main.c: Made search for m4 more explicit.
+
+2015-12-12  Will Estes <westes575@gmail.com>
+
+	* src/flex.skl: Returned 0 from yywrap() instead of EOF
+
+2015-12-11  Will Estes <westes575@gmail.com>
+
+	* src/libmain.c: Changed end of main() in libmain to exit(0)
+
+2015-12-11  Will Estes <westes575@gmail.com>
+
+	* NEWS, configure.ac: Mentioned v2.6.1; documented some changes
+	since v2.6.0
+
+2015-12-11  Will Estes <westes575@gmail.com>
+
+	* README: Updated build documentation; finished sf#155.  Removed version numbers for build tools. Noted that version
+	requirements for build tools will be noted in configure.ac. Expanded
+	documentation of building texinfo based docs.
+
+2015-12-11  Will Estes <westes575@gmail.com>
+
+	* doc/Makefile.am: Removed flex.pdf from distribution; partially
+	fixed sf#155
+
+2015-12-11  Will Estes <westes575@gmail.com>
+
+	* src/flex.skl: Commented in C style in skeleton; fixed sf#195
+
+2015-12-10  Will Estes <westes575@gmail.com>
+
+	* .gitignore: Ignored autoscan files
+
+2015-12-09  Will Estes <westes575@gmail.com>
+
+	* configure.ac: Checked for ranlib and strdup() at configure time
+
+2015-12-09  Michael McConville <mmcconville@mykolab.com>
+
+	* src/flexdef.h, src/misc.c, src/tblcmp.c, to.do/unicode/flexdef.h,
+	to.do/unicode/misc.c, to.do/unicode/tblcmp.c: Replace zero_out()
+	with stdlib's memset.
+
+2015-12-09  Michael McConville <mmcconville@mykolab.com>
+
+	* src/flex.skl: Removed memory allocation casts.
+
+2015-12-09  Michael McConville <mmcconville@mykolab.com>
+
+	* src/flexdef.h: Removed alloca() configuration.  Since alloca() is dangerous, depricated, we remove it.
+
+2015-12-09  Michael McConville <mmcconville@mykolab.com>
+
+	* src/flexdef.h: Removed implementation of isascii().  POSIX defines isascii(), so it's likely present on anything
+	weactually build flex on these days.
+
+2015-12-09  Michael McConville <mmcconville@mykolab.com>
+
+	* src/main.c, src/scanopt.c, src/tables.c: Removed NULL-checks
+	before free()
+
+2015-12-08  Michael McConville <mmcconville@mykolab.com>
+
+	* src/buf.c, src/dfa.c, src/flexdef.h, src/gen.c, src/scan.l,
+	to.do/unicode/flexdef.h, to.do/unicode/scan.l: Removed flex_free()i,
+	corrected buf_destroy logic.  As with flex_alloc(), replace with direct calls to free().  The function buf_destroy is now null safe and the logic was
+	corrected to free() correctly.
+
+2015-12-08  Michael McConville <mmcconville@mykolab.com>
+
+	* src/filter.c, src/flexdef.h, src/misc.c, src/scan.l,
+	src/scanflags.c, to.do/unicode/flexdef.h, to.do/unicode/misc.c,
+	to.do/unicode/scan.l: Removed flex_realloc().  As with flex_alloc(), replace calls to flex_realloc(), which was
+	just a wrapper around realloc().
+
+2015-12-08  Michael McConville <mmcconville@mykolab.com>
+
+	* src/buf.c, src/filter.c, src/flexdef.h, src/main.c, src/misc.c,
+	src/regex.c, src/scan.l, src/scanflags.c, src/sym.c,
+	to.do/unicode/flexdef.h, to.do/unicode/misc.c, to.do/unicode/scan.l: 
+	Removed flex_alloc; cleaned up style.  The function flex_alloc() was just a wrapper around malloc(). Since
+	this only added unclarity, and the flex_alloc() function is likely a
+	legacy of olden times, remove it in favor of calls to malloc()
+	directly.  Style elements cleaned up:  * superfluous spacing around parentheses  * non-constant initialization in variable declarations  * needless casts  * almost all uses of assignments as subexpressions
+
+2015-12-07  Michael McConville <mmcconville@mykolab.com>
+
+	* src/dfa.c, src/flexdef.h, src/gen.c, src/main.c, src/scan.l,
+	src/scanopt.c, tests/bison_nr_scanner.l,
+	tests/bison_yylloc_scanner.l, tests/bison_yylval_scanner.l,
+	tests/mem_nr.l, tests/mem_r.l, tests/pthread.l, tests/string_nr.l,
+	tests/string_r.l, tests/yyextra.l, to.do/unicode/scan.l: Remove
+	allocation casts
+
+2015-12-07  Will Estes <westes575@gmail.com>
+
+	* src/.gitignore, src/Makefile.am: Built flex with itself.  Changes in scan.l need to be built into flex with the same version
+	of flex in some cases. Since this build requirement is minimal, we
+	simply bootstrap flex unconditionally.  We intentionally exclude from version control the bootstrap
+	artifacts as the extra copy of the lexer, the intermediate scanner
+	and the bootstrap executable are not of interest.
+
+2015-12-05  Michael McConville <mmcconville@mykolab.com>
+
+	* src/buf.c, src/dfa.c, src/main.c, src/nfa.c, src/parse.y,
+	src/scan.l, src/scanopt.c, src/sym.c, to.do/unicode/main.c,
+	to.do/unicode/scan.l: Use NULL rather than (type *) 0.
+
+2015-12-05  Michael McConville <mmcconville@mykolab.com>
+
+	* src/flexdef.h, src/misc.c, src/sym.c, to.do/unicode/flexdef.h,
+	to.do/unicode/misc.c: Replace copy_unsigned_string() with xstrdup().  Like copy_string(), copy_unsigned_string() is just a clone of the
+	stlib's strdup(). We only use it twice. I'm pretty confident that
+	char signedness is irrelevant in this case.
+
+2015-12-04  Akim Demaille <akim@lrde.epita.fr>
+
+	* src/FlexLexer.h: Cleaned up white space.
+
+2015-12-04  Akim Demaille <akim@lrde.epita.fr>
+
+	* src/FlexLexer.h: Removed struct keyword before yy_buffer_state
+
+2015-12-04  Akim Demaille <akim@lrde.epita.fr>
+
+	* examples/testxxLexer.l, src/FlexLexer.h, src/flex.skl, src/main.c: 
+	Replaced FLEX_STD macro with std::.  The std:: construct exists as of C++98, so we can simply assume it
+	is supported.
+
+2015-12-04  Akim Demaille <akim@lrde.epita.fr>
+
+	* src/Makefile.am: Generated skel.c explicitly in srcdir.  Rewrote the target for skel.c to explicitly mention the srcdir. This
+	should help when building flex from a directory outside the flex
+	tree. Spread the rule out over several lines to enhance readability.
+
+2015-12-04  Akim Demaille <akim@lrde.epita.fr>
+
+	* autogen.sh: Called glibtoolize if libtoolize run fails.  On Mac OS X, libtoolize is known as glibtoolize. In cases where
+	libtoolize is not present, then calling glibtoolize when
+	bootstrapping the build system gives more folks a shot at getting
+	flex built from the ground up.
+
+2015-12-02  Mightyjo <mightyjo@gmail.com>
+
+	* configure.ac: Checked for (g)texi2dvi. Better bison, help2man
+	checks.  Added test for presence of (g)texi2dvi program. Gave notice if
+	texi2dvi is unavailable and set TEXI2DVI=: to avoid giving users
+	headaches.  Enhanced tests for bison and help2man with notices when the programs
+	aren't found.  Set their program variables to use the missing script
+	in build-aux since it's compatible with them.
+
+2015-12-02  Michael McConville <mmcconville@mykolab.com>
+
+	* src/flexdef.h, src/misc.c, src/parse.y, src/scan.l, src/sym.c,
+	src/tables.c, to.do/unicode/flexdef.h, to.do/unicode/misc.c,
+	to.do/unicode/scan.l: Made string copying more standard.  copy_string() was a clone of the stdlib's strdup(). For safety,
+	simplicity, and speed, we should use that instead. We introduce
+	xstrdup() which wraps strdup() in a failure upon memory allocation
+	errors.
+
+2015-11-30  Serguey Parkhomovsky <sergueyparkhomovsky@gmail.com>
+
+	* src/scan.l: Error on unbalanced parentheses in rules section.
+
+2015-11-29  Will Estes <westes575@gmail.com>
+
+	* src/Makefile.am: Cleaned up BUILT_SOURCES list.  Removed reference to skel.c as a built source since other make rules
+	cover this case.
+
+2015-11-29  Will Estes <westes575@gmail.com>
+
+	* src/Makefile.am: Sorted file names in flex_SOURCES
+
+2015-11-27  Mightyjo <mightyjo@gmail.com>
+
+	* src/ecs.c, src/flexdef.h, src/main.c, src/misc.c, src/scan.l,
+	src/scanopt.c, src/sym.c, src/tblcmp.c: Replaced CHAR macro with
+	unsigned char type.  Thanks to Michael McConville for pointing out that the old Char
+	macro causes problems with static analysis.  The macro has been
+	removed and replaced with 'unsigned char' throughout the flex
+	sources. The macro is not needed at best and was confusing at worst.
+	It was not used in any of the example files nor was it mentioned in
+	the manual at all.
+
+2015-11-21  Will Estes <westes575@gmail.com>
+
+	* configure.ac: updated syntax of AC_INIT call as per autoupdate
+
+2015-11-21  Will Estes <westes575@gmail.com>
+
+	* tests/Makefile.am: removed extra call to a _CPPFLAGS variable
+
+2015-05-14  Stefan Reinauer <stefan.reinauer@coreboot.org>
+
+	* src/buf.c, src/ccl.c, src/dfa.c, src/ecs.c, src/gen.c,
+	src/main.c, src/misc.c, src/nfa.c, src/parse.y, src/scan.l,
+	src/scanopt.c, src/sym.c, src/tblcmp.c: Switch function definitions
+	from mixed K&R to consistent ANSI C.  flex was using K&R function definitions for some functions and ANSI
+	C style in others, sometimes even in the same file. Change the code
+	to consistently use ANSI C.  Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
+
+2015-11-16  Mightyjo <mightyjo@gmail.com>
+
+	* tests/Makefile.am: Used in-tree header file for c++ tests.
+
+2015-11-17  Will Estes <westes575@gmail.com>
+
+	* configure.ac: Declared version 2.6.0
+
+2015-11-17  Will Estes <westes575@gmail.com>
+
+	* NEWS: Dated, described flex release 2.6.0
+
+2015-11-13  Will Estes <westes575@gmail.com>
+
+	* NEWS, configure.ac: Declared version 2.6.0rc1
+
+2015-11-13  lukeallardyce <lukeallardyce@users.sourceforge.net>
+
+	* src/Makefile.am: Supplied versioning information in flex
+	libraries.  Resolves sourceforge bug #182. On OSX, and possibly other platforms,
+	building the libfl libraries without versioning information caused a
+	build failures.
+
+2015-11-12  Will Estes <westes575@gmail.com>
+
+	* tests/Makefile.am: Cleaned up more precisely after make check.  BUILT_SOURCES is now just the list of headers built as per the
+	automake manual. We provide the list of files to clean to make
+	rebuilding the test suite programs easier. We then use the
+	CLEANFILES list in a dist-hook to clean up the distribution that
+	automake gathers since not distributing flex generated files is
+	foreign to automake's mindset, but we need exactly that.  Additionally, we locate inputs to the tables-related tests more
+	precisely. Some files are in srcdir and some are in builddir, which
+	the arguments to the log compiler are now made aware of.
+
+2015-11-11  Will Estes <westes575@gmail.com>
+
+	* tests/Makefile.am: Pulled out scripts in tests/Makefile.am
+
+2015-11-11  Will Estes <westes575@gmail.com>
+
+	* tests/Makefile.am: Added srcdir to tableopts.am include
+
+2015-11-11  Will Estes <westes575@gmail.com>
+
+	* doc/Makefile.am: Changed man page dependencies.  The man page is just the --help output as reformatted by help2man.
+	The --help option is most likely to change when the flex skeleton
+	changes or one of the option parsing files changes or the
+	configure.ac script itself changes. The dependencies reflect this
+	now.  It is still necessary, under some circumstances, to rebuild flex
+	explicitly before building the man page. In theory, it's possible to
+	have automake arrange to do this all the time, but doing so works
+	out to be fragile, given the rest of the build system.
+
+2015-11-10  Will Estes <westes575@gmail.com>
+
+	* autogen.sh: Called libtoolize directly because autoreconf fails to
+	pick up LT_INIT properly
+
+2015-11-10  Will Estes <westes575@gmail.com>
+
+	* tests/Makefile.am: Added tableopts.sh to EXTRA_DIST
+
+2015-11-08  Mightyjo <mightyjo@gmail.com>
+
+	* tests/Makefile.am: Made tests depend on the built flex binary.
+
+2015-11-08  Mightyjo <mightyjo@gmail.com>
+
+	* : commit cf6cb4dce791c26567cc506770ca96b4f4118024 Author: Mightyjo
+	<mightyjo@gmail.com> Date:   Sat Nov 7 23:11:35 2015 -0800
+
+2015-11-04  Mightyjo <mightyjo@gmail.com>
+
+	* doc/flex.texi: Updated documentation to reflect the revisions to
+	FlexLexer.h
+
+2015-10-26  Mightyjo <mightyjo@gmail.com>
+
+	* src/FlexLexer.h, src/flex.skl: Changed several pointers to istream
+	(and ostream) to references in c++-only sections of the skeleton.  Patched up a variety of expected errors caused by changing istream*
+	to istream&.  Added a stray 'make' at line 545.  Oops.  Changed the buffer_state struct to store std::streambuf* instead of
+	std::istream* for C++ mode.  Changed interfaces in FlexLexer.h to
+	take std::istream& instead of *.  Backward compatibility temporarily
+	broken.  Patched up backward compatibility with reasonable behavior in the
+	presence of null pointers.  Re-added backward-compatible versions of the yyFlexLexer methods
+	that take iostream pointers.  All tests passing.
+
+2015-09-29  Translation Project <coordinator@translationproject.org>
+
+	* po/zh_CN.po: new zh_CN translation from the translation project
+
+2015-07-27  Jaska Uimonen <jaska.uimonen@helsinki.fi>
+
+	* src/gen.c: fix possible resource leak with yynultrans_tbl
+
+2015-07-27  Jaska Uimonen <jaska.uimonen@helsinki.fi>
+
+	* src/dfa.c: fix possible uninitialized array values
+
+2015-08-05  Will Estes <westes575@gmail.com>
+
+	* doc/flex.texi: add %{...%} block to example in manual
+
+2015-07-15  Will Estes <westes575@gmail.com>
+
+	* configure.ac: initialize libtool earlier in build system
+	generation
+
+2015-05-08  Translation Project <translation@translationproject.org>
+
+	* po/da.po: new da translation from the Translation Project
+
+2014-07-25  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* src/gen.c, src/scan.l, tests/bison_nr_parser.y,
+	tests/bison_yylloc_parser.y, tests/bison_yylval_parser.y,
+	tests/multiple_scanners_nr_main.c: Fix `label unused` warning
+
+2014-07-25  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* src/flex.skl: Fix two "signed/unsigned" warnings
+
+2014-07-25  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* tests/alloc_extra.l, tests/array_nr.l, tests/array_r.l,
+	tests/basic_nr.l, tests/basic_r.l, tests/bison_nr_scanner.l,
+	tests/bison_yylloc_scanner.l, tests/bison_yylval_scanner.l,
+	tests/ccl.l, tests/cxx_basic.ll, tests/debug_nr.l, tests/debug_r.l,
+	tests/extended.l, tests/header_nr_scanner.l,
+	tests/header_r_scanner.l, tests/include_by_buffer.direct.l,
+	tests/include_by_push.direct.l,
+	tests/include_by_reentrant.direct.l, tests/lineno_nr.l,
+	tests/lineno_r.l, tests/lineno_trailing.l, tests/mem_nr.l,
+	tests/mem_r.l, tests/multiple_scanners_nr_1.l,
+	tests/multiple_scanners_nr_2.l, tests/multiple_scanners_r_1.l,
+	tests/multiple_scanners_r_2.l, tests/noansi_nr.l, tests/noansi_r.l,
+	tests/posix.l, tests/posixly_correct.l, tests/prefix_nr.l,
+	tests/prefix_r.l, tests/pthread.l, tests/quotes.l, tests/reject.l4,
+	tests/rescan_nr.direct.l, tests/rescan_r.direct.l,
+	tests/string_nr.l, tests/string_r.l, tests/tableopts.l4,
+	tests/top.l, tests/yyextra.l: Fix `unused function` warnings in
+	tests
+
+2014-07-25  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* tests/bison_nr_parser.y, tests/bison_yylloc_parser.y,
+	tests/bison_yylval_parser.y: Fix `implicit function declaration`
+	warnings in tests
+
+2014-07-25  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* tests/header_r_main.c, tests/multiple_scanners_nr_main.c,
+	tests/reject.l4, tests/tableopts.l4, tests/top_main.c: Remove a few
+	`unused variable` warnings
+
+2014-07-25  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* src/filter.c: Remove unused variable from
+	src/filter.c:filter_fix_linedirs
+
+2014-07-25  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* src/scanopt.c: Remove unused argument and variable from
+	src/scanopt.c:scanopt_err
+
+2014-07-25  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* src/flex.skl, src/libmain.c, src/parse.y, tests/bison_nr_main.c,
+	tests/bison_yylloc_main.c, tests/bison_yylloc_parser.y,
+	tests/bison_yylval_main.c, tests/bison_yylval_parser.y,
+	tests/header_nr_main.c, tests/header_r_main.c, tests/lineno_nr.l,
+	tests/lineno_r.l, tests/lineno_trailing.l, tests/mem_r.l,
+	tests/multiple_scanners_nr_main.c,
+	tests/multiple_scanners_r_main.c, tests/pthread.l,
+	tests/rescan_nr.direct.l, tests/rescan_r.direct.l, tests/top_main.c: 
+	Fix a few "unused parameter" warnings
+
+2014-07-25  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* src/main.c: Fix warning about redefined macro when multiple
+	scanners are used.
+
+2014-07-25  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* tests/bison_nr_parser.y: Avoid passing `const char*` argument as
+	`char*` in test-bison-nr
+
+2014-11-21  Alexis La Goutte <alexis.lagoutte@gmail.com>
+
+	* src/misc.c, src/regex.c, src/tables.c, src/tables_shared.c: Fix
+	-Wdocumentation warnings
+
+2014-11-16  Will Estes <westes575@gmail.com>
+
+	* tests/README: document new suite layout
+
+2014-11-16  Will Estes <westes575@gmail.com>
+
+	* tests/TEMPLATE/.gitignore, tests/TEMPLATE/Makefile.am,
+	tests/TEMPLATE/cvsignore, tests/TEMPLATE/parser.y,
+	tests/TEMPLATE/scanner.l, tests/TEMPLATE/test.input,
+	tests/create-test, tests/descriptions: remove unused files after
+	test suite refactor
+
+2014-11-14  Will Estes <westes575@gmail.com>
+
+	* .gitignore, doc/.gitignore: Ignore directories build-aux/, m4/ Since build-aux/ now contains a number of files previously at the
+	top level, we ignore build-aux/. Therefore, it's not necessary to
+	list any files that are now kept in it. Also, explicitly mark m4/ as
+	a directory to ignore.
+
+2014-11-14  Will Estes <westes575@gmail.com>
+
+	* configure.ac: added back call to AC_CONFIG_AUX_DIR.  In an effort to reduce top level directory clutter, reintroduced the
+	call to AC_CONFIG_AUX_DIR. Moved the call to LT_INIT to after that
+	call so configure will be able to find its files.
+
+2014-07-18  Will Estes <westes575@gmail.com>
+
+	* tests/tableopts.sh, tests/testwrapper.sh: use unofficial bash
+	strict mode and cleanups in supporting bash scripts
+
+2014-07-18  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/tableopts.am,
+	tests/tableopts.l4, tests/tableopts.sh, tests/tableopts.txt,
+	tests/test-table-opts/.gitignore,
+	tests/test-table-opts/Makefile.am, tests/test-table-opts/scanner.l,
+	tests/test-table-opts/test.input: split apart table options tests
+	into tests per threading, table option, serialization and
+	verification
+
+2014-07-17  Will Estes <westes575@gmail.com>
+
+	* tests/tableopts.sh: add tableopts.sh script
+
+2014-07-02  Will Estes <westes575@gmail.com>
+
+	* configure.ac, tests/Makefile.am: use automake conditional  around
+	pthread test
+
+2014-07-01  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/lineno_trailing.l,
+	tests/lineno_trailing.one.txt,
+	tests/test-lineno-trailing/.gitignore,
+	tests/test-lineno-trailing/Makefile.am,
+	tests/test-lineno-trailing/scanner.l,
+	tests/test-lineno-trailing/test.input: refactor lineno_trailing test
+	for new test suite layout
+
+2014-07-01  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/lineno_r.l,
+	tests/lineno_r.one.txt, tests/test-lineno-r/.gitignore,
+	tests/test-lineno-r/Makefile.am, tests/test-lineno-r/scanner.l,
+	tests/test-lineno-r/test.input: refactor lineno_r test for new test
+	suite layout
+
+2014-07-01  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/lineno_nr.l,
+	tests/lineno_nr.one.txt, tests/test-lineno-nr/.gitignore,
+	tests/test-lineno-nr/Makefile.am, tests/test-lineno-nr/scanner.l,
+	tests/test-lineno-nr/test.input, tests/testwrapper.sh: refactor
+	lineno_nr test for new test suite layout
+
+2014-06-30  Will Estes <westes575@gmail.com>
+
+	* tests/test-linedir-r/.gitignore,
+	tests/test-linedir-r/Makefile.am,
+	tests/test-linedir-r/check-lines.awk, tests/test-linedir-r/main.c,
+	tests/test-linedir-r/scanner.l, tests/test-linedir-r/test.input: 
+	Remove linedir_r test.  The linedir_r test tested the implementation of line number
+	tracking, not its results.
+
+2014-06-24  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/pthread.l,
+	tests/pthread_1.txt, tests/pthread_2.txt, tests/pthread_3.txt,
+	tests/pthread_4.txt, tests/pthread_5.txt,
+	tests/test-pthread/.gitignore, tests/test-pthread/Makefile.am,
+	tests/test-pthread/scanner.l, tests/test-pthread/test-1.input,
+	tests/test-pthread/test-2.input, tests/test-pthread/test-3.input,
+	tests/test-pthread/test-4.input, tests/test-pthread/test-5.input: 
+	refactor pthread test for new test suite layout
+
+2014-06-24  Will Estes <westes575@gmail.com>
+
+	* tests/Makefile.am: build reject_[vs]er tests explicitly to pass
+	proper compiler flags
+
+2014-06-24  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/cxx_yywrap.ll,
+	tests/cxx_yywrap.txt, tests/test-c++-yywrap/.gitignore,
+	tests/test-c++-yywrap/Makefile.am, tests/test-c++-yywrap/scanner.l,
+	tests/test-c++-yywrap/test.input, tests/testwrapper.sh: refactor
+	cxx_yywrap test for new test suite layout
+
+2014-06-17  Will Estes <westes575@gmail.com>
+
+	* tests/Makefile.am, tests/options.cn,
+	tests/test-concatenated-options/.gitignore,
+	tests/test-concatenated-options/Makefile.am: refactor concatenated
+	options test for new test suite layout
+
+2014-06-17  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am,
+	tests/include_by_buffer.direct.l,
+	tests/include_by_buffer.direct.txt,
+	tests/include_by_buffer.direct_2.txt,
+	tests/include_by_buffer.direct_3.txt,
+	tests/include_by_push.direct.l, tests/include_by_push.direct.txt,
+	tests/include_by_push.direct_2.txt,
+	tests/include_by_push.direct_3.txt,
+	tests/include_by_reentrant.direct.l,
+	tests/include_by_reentrant.direct.txt,
+	tests/include_by_reentrant.direct_2.txt,
+	tests/include_by_reentrant.direct_3.txt,
+	tests/test-include-by-buffer/.gitignore,
+	tests/test-include-by-buffer/Makefile.am,
+	tests/test-include-by-buffer/scanner.l,
+	tests/test-include-by-buffer/test-1.input,
+	tests/test-include-by-buffer/test-2.input,
+	tests/test-include-by-buffer/test-3.input,
+	tests/test-include-by-push/.gitignore,
+	tests/test-include-by-push/Makefile.am,
+	tests/test-include-by-push/scanner.l,
+	tests/test-include-by-push/test-1.input,
+	tests/test-include-by-push/test-2.input,
+	tests/test-include-by-push/test-3.input,
+	tests/test-include-by-reentrant/.gitignore,
+	tests/test-include-by-reentrant/Makefile.am,
+	tests/test-include-by-reentrant/scanner.l,
+	tests/test-include-by-reentrant/test-1.input,
+	tests/test-include-by-reentrant/test-2.input,
+	tests/test-include-by-reentrant/test-3.input: refactor include_by_*
+	tests for new test suite layout
+
+2014-06-16  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/rescan_nr.direct.l,
+	tests/rescan_nr.direct.txt, tests/rescan_nr.l, tests/rescan_nr.txt,
+	tests/rescan_r.direct.l, tests/rescan_r.direct.txt,
+	tests/test-rescan-r/.gitignore, tests/test-rescan-r/Makefile.am,
+	tests/test-rescan-r/scanner.l, tests/test-rescan-r/test.input,
+	tests/testwrapper.sh: refactor rescan_r test for new test suite
+	layout
+
+2014-06-16  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/rescan_nr.l,
+	tests/rescan_nr.txt, tests/test-rescan-nr/.gitignore,
+	tests/test-rescan-nr/Makefile.am, tests/test-rescan-nr/scanner.l,
+	tests/test-rescan-nr/test.input, tests/testwrapper.sh: Refactor
+	rescan_nr test for new test suite layout.  Also add -r option to testwrapper.sh to support passing input file
+	as a command line argument to the test scanner without using shell
+	redirection.
+
+2014-06-16  Will Estes <westes575@gmail.com>
+
+	* tests/Makefile.am: correct use of objext to OBJEXT
+
+2014-06-16  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/quotes.l,
+	tests/quotes.txt, tests/test-quotes/.gitignore,
+	tests/test-quotes/Makefile.am, tests/test-quotes/scanner.l,
+	tests/test-quotes/test.input: refactor quotes test for new test
+	suite layout
+
+2014-06-16  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/reject.l4,
+	tests/reject.txt, tests/test-reject/.gitignore,
+	tests/test-reject/Makefile.am, tests/test-reject/scanner.l,
+	tests/test-reject/test.input, tests/testwrapper.sh: Refactor reject
+	test for new test suite layout.  Split out reject test into its constituant tests. Add .reject tests
+	and .table tests for automake test log generation. Rewrite
+	testwrapper.sh to handle running with a tables file and specifying
+	optional input using command line options rather than positional
+	parameters.
+
+2014-06-15  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am,
+	tests/multiple_scanners_r_1.l, tests/multiple_scanners_r_2.l,
+	tests/multiple_scanners_r_main.c,
+	tests/test-multiple-scanners-r/.gitignore,
+	tests/test-multiple-scanners-r/Makefile.am,
+	tests/test-multiple-scanners-r/main.c,
+	tests/test-multiple-scanners-r/scanner-1.l,
+	tests/test-multiple-scanners-r/scanner-2.l: Refactor
+	multiple_scanners_r test for new test suite layout.  Also, remove the use of table files from this test as that tests two
+	features at once and we want to be as close to testing one feature
+	at a time as we can be.
+
+2014-06-15  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am,
+	tests/multiple_scanners_nr_1.l, tests/multiple_scanners_nr_2.l,
+	tests/multiple_scanners_nr_main.c,
+	tests/test-multiple-scanners-nr/.gitignore,
+	tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-nr/main.c,
+	tests/test-multiple-scanners-nr/scanner-1.l,
+	tests/test-multiple-scanners-nr/scanner-2.l: refactor
+	multiple_scanners_nr test for new test suite layout
+
+2014-06-14  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am,
+	tests/cxx_multiple_scanners.txt, tests/cxx_multiple_scanners_1.ll,
+	tests/cxx_multiple_scanners_2.ll,
+	tests/cxx_multiple_scanners_main.cc,
+	tests/test-c++-multiple-scanners/.gitignore,
+	tests/test-c++-multiple-scanners/Makefile.am,
+	tests/test-c++-multiple-scanners/main.cpp,
+	tests/test-c++-multiple-scanners/scanner-1.l,
+	tests/test-c++-multiple-scanners/scanner-2.l,
+	tests/test-c++-multiple-scanners/test.input: refactor
+	cxx_multiple_scanners test for new test suite layout
+
+2014-06-14  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/c_cxx_nr.lll,
+	tests/c_cxx_nr.txt, tests/c_cxx_r.lll, tests/c_cxx_r.txt,
+	tests/test-c-cpp-nr/.gitignore, tests/test-c-cpp-nr/Makefile.am,
+	tests/test-c-cpp-nr/scanner.l, tests/test-c-cpp-nr/test.input,
+	tests/test-c-cpp-r/.gitignore, tests/test-c-cpp-r/Makefile.am,
+	tests/test-c-cpp-r/scanner.l, tests/test-c-cpp-r/test.input: 
+	refactor c_cxx_nr, c_cxx_r tests for new test suite layout
+
+2014-06-14  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/cxx_basic.ll,
+	tests/cxx_basic.txt, tests/test-c++-basic/.gitignore,
+	tests/test-c++-basic/Makefile.am, tests/test-c++-basic/scanner.l,
+	tests/test-c++-basic/test.input: refactor cxx_basic test for new
+	test suite layout
+
+2014-06-14  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/posixly_correct.l,
+	tests/test-posixly-correct/.gitignore,
+	tests/test-posixly-correct/Makefile.am,
+	tests/test-posixly-correct/scanner.l: refactor posixly_correct test
+	for new test suite layout
+
+2014-06-14  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am,
+	tests/test-yyextra/.gitignore, tests/test-yyextra/Makefile.am,
+	tests/test-yyextra/scanner.l, tests/test-yyextra/test.input,
+	tests/yyextra.l, tests/yyextra.txt: refactor yyextra test for new
+	test suite layout
+
+2014-06-14  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/test-top/.gitignore,
+	tests/test-top/Makefile.am, tests/test-top/main.c,
+	tests/test-top/scanner.l, tests/test-top/test.input, tests/top.l,
+	tests/top.txt, tests/top_main.c: refactor top test for new test
+	suite layout
+
+2014-06-14  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/string_r.l,
+	tests/test-string-r/.gitignore, tests/test-string-r/Makefile.am,
+	tests/test-string-r/scanner.l: refactor string_r test for new test
+	suite layout
+
+2014-06-14  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/string_nr.l,
+	tests/test-string-nr/.gitignore, tests/test-string-nr/Makefile.am,
+	tests/test-string-nr/scanner.l: refactor string_nr test for new test
+	suite layout
+
+2014-06-12  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/prefix_r.l,
+	tests/prefix_r.txt, tests/test-prefix-r/.gitignore,
+	tests/test-prefix-r/Makefile.am, tests/test-prefix-r/README,
+	tests/test-prefix-r/scanner.l, tests/test-prefix-r/test.input: 
+	refactor prefix_r test for new test suite layout
+
+2014-06-12  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/prefix_nr.l,
+	tests/prefix_nr.txt, tests/test-prefix-nr/.gitignore,
+	tests/test-prefix-nr/Makefile.am, tests/test-prefix-nr/README,
+	tests/test-prefix-nr/scanner.l, tests/test-prefix-nr/test.input: 
+	refactor prefix_nr for new test suite layout
+
+2014-06-12  Will Estes <westes575@gmail.com>
+
+	* tests/testwrapper.sh: Check if test input file exists.  Not all tests have input files, so check if one exists and run the
+	test program accordingly.
+
+2014-06-12  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/posix.l,
+	tests/test-posix/.gitignore, tests/test-posix/Makefile.am,
+	tests/test-posix/scanner.l: refactor posix test for new test suite
+	layout
+
+2014-06-12  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/noansi_r.l,
+	tests/noansi_r.txt, tests/test-noansi-r/.gitignore,
+	tests/test-noansi-r/Makefile.am, tests/test-noansi-r/scanner.l,
+	tests/test-noansi-r/test.input: refactor noansi_r test for new test
+	suite layout
+
+2014-06-12  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/noansi_nr.l,
+	tests/noansi_nr.txt, tests/test-noansi-nr/.gitignore,
+	tests/test-noansi-nr/Makefile.am, tests/test-noansi-nr/scanner.l,
+	tests/test-noansi-nr/test.input: refactor noansi_nr for new test
+	suite layout
+
+2014-06-05  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/mem_r.l,
+	tests/mem_r.txt, tests/test-mem-r/.gitignore,
+	tests/test-mem-r/Makefile.am, tests/test-mem-r/scanner.l,
+	tests/test-mem-r/test.input: refactor mem_r test for new test suite
+	layout
+
+2014-06-05  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/mem_nr.l,
+	tests/mem_nr.txt, tests/test-mem-nr/.gitignore,
+	tests/test-mem-nr/Makefile.am, tests/test-mem-nr/scanner.l,
+	tests/test-mem-nr/test.input: refactor mem_nr test for new test
+	suite layout
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/header_r.txt,
+	tests/header_r_main.c, tests/header_r_scanner.l,
+	tests/test-header-r/.gitignore, tests/test-header-r/Makefile.am,
+	tests/test-header-r/main.c, tests/test-header-r/scanner.l,
+	tests/test-header-r/test.input: refactor header_r test for new test
+	suite layout
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/header_nr.txt,
+	tests/header_nr_main.c, tests/header_nr_scanner.l,
+	tests/test-header-nr/.gitignore, tests/test-header-nr/Makefile.am,
+	tests/test-header-nr/main.c, tests/test-header-nr/scanner.l,
+	tests/test-header-nr/test.input: refactor header_nr test for new
+	test suite layout
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/extended.l,
+	tests/extended.txt, tests/test-extended/.gitignore,
+	tests/test-extended/Makefile.am, tests/test-extended/scanner.l,
+	tests/test-extended/test.input: refactor extended test for new test
+	suite layout
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/debug_r.l,
+	tests/debug_r.txt, tests/test-debug-r/.gitignore,
+	tests/test-debug-r/Makefile.am, tests/test-debug-r/scanner.l,
+	tests/test-debug-r/test.input: refactor debug_r test for new test
+	suite layout
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/debug_nr.l,
+	tests/debug_nr.txt, tests/test-debug-nr/.gitignore,
+	tests/test-debug-nr/Makefile.am, tests/test-debug-nr/scanner.l,
+	tests/test-debug-nr/test.input: refactor debug_nr test for new test
+	suite layout
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/ccl.l, tests/ccl.txt,
+	tests/test-ccl/.gitignore, tests/test-ccl/Makefile.am,
+	tests/test-ccl/scanner.l, tests/test-ccl/test.input: refactor ccl
+	test for new test suite layout
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/alloc-extra.l,
+	tests/alloc-extra.txt, tests/alloc_extra.l, tests/alloc_extra.txt,
+	tests/array-nr.l, tests/array-nr.txt, tests/array-r.l,
+	tests/array-r.txt, tests/array_nr.l, tests/array_nr.txt,
+	tests/array_r.l, tests/array_r.txt, tests/basic-nr.l,
+	tests/basic-nr.txt, tests/basic-r.l, tests/basic-r.txt,
+	tests/basic_nr.l, tests/basic_nr.txt, tests/basic_r.l,
+	tests/basic_r.txt, tests/bison-nr-main.c, tests/bison-nr-parser.y,
+	tests/bison-nr-scanner.l, tests/bison-nr.txt,
+	tests/bison-yylloc-main.c, tests/bison-yylloc-parser.y,
+	tests/bison-yylloc-scanner.l, tests/bison-yylloc.txt,
+	tests/bison-yylval-main.c, tests/bison-yylval-parser.y,
+	tests/bison-yylval-scanner.l, tests/bison-yylval.txt,
+	tests/bison_nr.txt, tests/bison_nr_main.c, tests/bison_nr_parser.y,
+	tests/bison_nr_scanner.l, tests/bison_yylloc.txt,
+	tests/bison_yylloc_main.c, tests/bison_yylloc_parser.y,
+	tests/bison_yylloc_scanner.l, tests/bison_yylval.txt,
+	tests/bison_yylval_main.c, tests/bison_yylval_parser.y,
+	tests/bison_yylval_scanner.l: use underscores in test file names to
+	silence automake warnings
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* .gitignore, m4/.gitignore, m4/Makefile.am: do not track m4
+	subdirectory any more
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* .gitignore, configure.ac: upgrade automake version to 1.14.1 Unfortunately, automake 1.14.1 does not play nicely with
+	AC_CONFIG_AUX_DIR, so upgrading the used automake version required
+	removing the build-aux directory and letting autoconf's installed
+	helper files live more over the tree.
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* doc/.gitignore: ignore more files generated by texinfo
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* configure.ac: update gettext version to 0.19
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* configure.ac: call LT_INIT earlier in configure.ac
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/bison-yylval-main.c,
+	tests/bison-yylval-parser.y, tests/bison-yylval-scanner.l,
+	tests/bison-yylval.txt, tests/test-bison-yylval/.gitignore,
+	tests/test-bison-yylval/Makefile.am,
+	tests/test-bison-yylval/main.c, tests/test-bison-yylval/parser.y,
+	tests/test-bison-yylval/scanner.l,
+	tests/test-bison-yylval/test.input: refactor bison-yylval test for
+	new test suite layout
+
+2014-06-04  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/bison-yylloc-main.c,
+	tests/bison-yylloc-parser.y, tests/bison-yylloc-scanner.l,
+	tests/bison-yylloc.txt, tests/test-bison-yylloc/.gitignore,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylloc/main.c, tests/test-bison-yylloc/parser.y,
+	tests/test-bison-yylloc/scanner.l,
+	tests/test-bison-yylloc/test.input: refactor bison-yylloc test for
+	new test suite layout
+
+2014-06-03  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/bison-nr-main.c,
+	tests/bison-nr-parser.y, tests/bison-nr-scanner.l,
+	tests/bison-nr.txt, tests/test-bison-nr/.gitignore,
+	tests/test-bison-nr/Makefile.am, tests/test-bison-nr/main.c,
+	tests/test-bison-nr/parser.y, tests/test-bison-nr/scanner.l,
+	tests/test-bison-nr/test.input: refactor bison-nr test for new test
+	suite layout
+
+2014-06-01  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/array-r.l,
+	tests/array-r.txt, tests/test-array-r/.gitignore,
+	tests/test-array-r/Makefile.am, tests/test-array-r/scanner.l,
+	tests/test-array-r/test.input: refactor array-r test for new test
+	suite layout
+
+2014-06-01  Will Estes <westes575@gmail.com>
+
+	* tests/Makefile.am: list tests/README with other EXTRA_DIST files
+	in tests/
+
+2014-06-01  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/array-nr.l,
+	tests/array-nr.txt, tests/test-array-nr/.gitignore,
+	tests/test-array-nr/Makefile.am, tests/test-array-nr/scanner.l,
+	tests/test-array-nr/test.input: refactor array-nr test for new test
+	suite layout
+
+2014-06-01  Will Estes <westes575@gmail.com>
+
+	* tests/Makefile.am, tests/testwrapper.sh: make tests/testwrapper.sh
+	more verbose; find input in srcdir Since output is redirected by the automake parallel test suite
+	driver, turn on both -v and -x in bash for the testwrapper.sh shell
+	script. This helps a ton in debugging problems with the test harness
+	itself.  In general, the input files are in automake's srcdir and the name of
+	the test includes the relative path to it (even though that's
+	supposed to be ./). Therefore, pass srcdir in AM_LOG_FLAGS and
+	prepend that to the test name as part of constructing the input
+	file's name.
+
+2014-06-01  Will Estes <westes575@gmail.com>
+
+	* tests/Makefile.am: distribute tests/testwrapper.sh
+
+2014-06-01  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/alloc-extra.l,
+	tests/alloc-extra.txt, tests/test-alloc-extra/.gitignore,
+	tests/test-alloc-extra/Makefile.am,
+	tests/test-alloc-extra/scanner.l, tests/test-alloc-extra/test.input: 
+	refacter alloc-extra for new test suite layout
+
+2014-05-29  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore, tests/Makefile.am, tests/basic-r.l,
+	tests/basic-r.txt, tests/test-basic-r/.gitignore,
+	tests/test-basic-r/Makefile.am, tests/test-basic-r/scanner.l,
+	tests/test-basic-r/test.input: refactor basic-r test for new test
+	suite layout
+
+2014-04-22  Will Estes <westes575@gmail.com>
+
+	* tests/Makefile.am, tests/basic-nr.l, tests/basic-nr.txt,
+	tests/test-basic-nr/.gitignore, tests/test-basic-nr/Makefile.am,
+	tests/test-basic-nr/scanner.l, tests/test-basic-nr/test.input,
+	tests/testwrapper.sh: refactor basic-nr test for new test suite
+	layout
+
+2014-04-22  Will Estes <westes575@gmail.com>
+
+	* configure.ac: remove old tests/ subdirectories from build system
+
+2014-04-22  Will Estes <westes575@gmail.com>
+
+	* configure.ac: add parallel test suite option to build system
+
+2014-04-22  Will Estes <westes575@gmail.com>
+
+	* tests/.gitignore: ignore files for new test suite layout
+
+2014-04-22  Will Estes <westes575@gmail.com>
+
+	* tests/Makefile.am: use automake parallel test suite option  to
+	build test suite
+
+2014-04-09  Manoj Srivastava <srivasta@golden-gryphon.com>
+
+	* tests/test-bison-yylloc/parser.y,
+	tests/test-bison-yylval/parser.y: Do not use obsolete bison
+	constructs in tests.  In Bison 3.0, support for YYLEX_PARAM and YYPARSE_PARAM has been
+	removed (deprecated in Bison 1.875): use %lex-param, %parse-param,
+	or %param. This commit fixes the tests so they still work.  Signed-off-by: Manoj Srivastava <srivasta@golden-gryphon.com>
+
+2014-10-31  Christos Zoulas <christos@zoulas.com>
+
+	* src/buf.c, src/filter.c, src/flex.skl, src/flexdef.h, src/gen.c,
+	src/libmain.c, src/libyywrap.c, src/main.c, src/misc.c, src/nfa.c,
+	src/scan.l, src/scanflags.c, src/scanopt.c, src/yylex.c: NetBSD
+	downstream patches.    const fixes.    -Wconversion fixes for the skeleton files.    param namespace protection (add _ to inline function parameters).    unused variable/code removal.    rename warn to lwarn to avoid conflict with <err.h>.    ctype.h function argument correction.    merged the error functions lerrif and lerrsf -> lerr.
+
+2014-07-25  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* src/flexdef.h, src/misc.c, src/scanflags.c: Allow error reporting
+	routines to accept varying number of arguments in modern style
+
+2014-07-25  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* src/buf.c: Fix warning on assigning from `const char*` to `char*`
+
+2014-07-24  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* src/main.c: Add disambiguation braces in main.c
+
+2014-07-17  Yuri <yuri@tsoft.com>
+
+	* doc/flex.texi, examples/fastwc/mywc.c, src/ccl.c, src/dfa.c,
+	src/ecs.c, src/flex.skl, src/flexdef.h, src/gen.c, src/misc.c,
+	src/nfa.c, src/parse.y, src/scan.l, src/sym.c, src/tblcmp.c: Removed
+	deprecated 'register' storage class specifier.  clang-3.5.0 now
+	complains about them: warning: 'register' storage class specifier is
+	deprecated [-Wdeprecated-register]
+
+2014-06-21  Mariusz Pluciński <mplucinski@mplucinski.com>
+
+	* src/flexdef.h, src/main.c, src/misc.c, src/options.c,
+	src/options.h, src/yylex.c: Change output formats from octal to
+	hexadecimal
+
+2014-06-11  Will Estes <westes575@gmail.com>
+
+	* NEWS, configure.ac: update version number to 2.6.0-pre
+
+2014-05-03  Will Estes <westes575@gmail.com>
+
+	* src/ecs.c: check limits before using array index cclp; resolves
+	sf-166
+
+2014-04-02  Sean McBride <sean@rogue-research.com>
+
+	* src/flex.skl: Suppress clang warning about empty @param paragraph;
+	resolves sf#158 Signed-off-by: Will Estes <westes575@gmail.com>
+
+2014-04-02  Will Estes <westes575@gmail.com>
+
+	* doc/flex.texi: fix punction when talking about colon-bracket
+	delimiters; resolves sf#167
+
+2014-04-02  Will Estes <westes575@gmail.com>
+
+	* doc/flex.texi: remove proofreading comment
+
+2014-04-02  Will Estes <westes575@gmail.com>
+
+	* doc/flex.texi: Put angle brackets around start condition name;
+	resolves bug #168.
+
+2014-04-02  Michael Haubenwallner <michael.haubenwallner@ssi-schaefer.com>
+
+	* lib/Makefile.am, lib/realloc.c: Fix malloc/realloc replacement,
+	bug#151.  Signed-off-by: Will Estes <westes575@gmail.com>
+
+2014-04-02  Will Estes <westes575@gmail.com>
+
+	* lib/malloc.c: change crlf line ending to lf
+
+2014-03-26  Will Estes <westes575@gmail.com>
+
+	* NEWS: mention flex 2.5.39 release in NEWS file
+
+2014-03-26  Will Estes <westes575@gmail.com>
+
+	* control.ac: initial default control file for shipper
+
+2014-03-05  Cyril Brulebois <kibi@debian.org>
+
+	* src/flex.skl: Adjust buffer sizes on ia64.  From the debian change entry: > Finish fixing the ia64 buffer issue. Previous commits increased
+	YY_READ_BUF_SIZE (where __ia64__ is defined) but left YY_BUF_SIZE
+	unchanged, so that didn't fix the problem in the end. In the general
+	case, the latter is twice the former. Therefore set it to the same
+	ratio in the ia64 case.  In general, this sort of architecture specific fix is not the path
+	we want to take, but the cleanup should be done in a more organized
+	way in the future and getting it working would be preferrable now.
+
+2014-02-18  Will Estes <westes575@gmail.com>
+
+	* Makefile.am, src/Makefile.am: move m4 make variable to
+	src/Makefile.am.  This prevents an error when building skel.c caused by the $(m4) make
+	variable not being defined. Particularly nasty since skel.c would
+	still be created, thus causing make to think skel.c was up to date.
+
+2014-02-18  Will Estes <westes575@gmail.com>
+
+	* devel/00EXTRACT-ALL-SYMS.sh, devel/README, devel/dump-tables.pl,
+	devel/tables.pl: remove unused devel/ subdirectory from codebase
+
+2014-02-15  Will Estes <westes575@gmail.com>
+
+	* po/Rules-getpo: Add make rule to rsync latest .po files from
+	translation project.  The rule assumes that rsync is on the path and that there is exactly
+	one domain listed in the DOMAIN make variable. The intent is that
+	the rule will work with vpath builds.
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* .gitignore: git ignore directories of the form flex-*
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* po/POTFILES.in: list source files for translation as now being in
+	src/
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* Makefile.am, configure.ac, tools/Makefile.am: Add tools/
+	directory.  Since tools/git2cl is a dependency of ChangeLog, not distributing
+	tools/git2cl with flex causes the "make dist" target to fail in the
+	distributed tar ball.
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* Makefile.am: removes extraneous files from EXTRA_DIST as automake
+	picks them up better without mentioning them
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* NEWS: mention version 2.6.0 in release news
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* .gitignore, FlexLexer.h, Makefile.am, buf.c, ccl.c, configure.ac,
+	dfa.c, doc/.gitignore, doc/Makefile.am, ecs.c, filter.c, flex.skl,
+	flexdef.h, flexint.h, gen.c, gettext.h, lib/.gitignore, libmain.c,
+	libyywrap.c, main.c, misc.c, mkskel.sh, nfa.c, options.c,
+	options.h, parse.y, regex.c, scan.l, scanflags.c, scanopt.c,
+	scanopt.h, src/.gitignore, src/FlexLexer.h, src/Makefile.am,
+	src/buf.c, src/ccl.c, src/dfa.c, src/ecs.c, src/filter.c,
+	src/flex.skl, src/flexdef.h, src/flexint.h, src/gen.c,
+	src/gettext.h, src/libmain.c, src/libyywrap.c, src/main.c,
+	src/misc.c, src/mkskel.sh, src/nfa.c, src/options.c, src/options.h,
+	src/parse.y, src/regex.c, src/scan.l, src/scanflags.c,
+	src/scanopt.c, src/scanopt.h, src/sym.c, src/tables.c,
+	src/tables.h, src/tables_shared.c, src/tables_shared.h,
+	src/tblcmp.c, src/version.h, src/yylex.c, sym.c, tables.c,
+	tables.h, tables_shared.c, tables_shared.h, tblcmp.c, version.h,
+	yylex.c: move flex program sources into src/ directory The *.[chly] sources are now in the src directory. This implies a
+	bunch of changes in Makefile.am and friends to account for the new
+	location. The .gitignore files are now more local to places where
+	various object files and generated source files occur.
+
+2014-02-13  Will Estes <westes575@gmail.com>
+
+	* configure.ac: increment flex version to 2.6.0
+
+2014-02-16  Translation Project <coordinator@translationproject.org>
+
+	* po/ru.po: update ru translation from the translation project
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* NEWS: mention updated da translation in release news
+
+2014-02-14  Translation Project <coordinator@translationproject.org>
+
+	* po/da.po: update da translation from the translation project
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* NEWS: mention updated es translation in release news
+
+2014-02-14  Translation Project <coordinator@translationproject.org>
+
+	* po/es.po: update es translation from the translation project
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* NEWS: mention updated ko translation in release news
+
+2014-02-14  Translation Project <coordinator@translationproject.org>
+
+	* po/ko.po: update ko translation from the translation project
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* NEWS: mention updated ro translation in release news
+
+2014-02-14  Translation Project <coordinator@translationproject.org>
+
+	* po/ro.po: update ro translation from the translation project
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* NEWS: mention updated ru translation in release news
+
+2014-02-14  Translation Project <coordinator@translationproject.org>
+
+	* po/ru.po: update ru translation from the translation project
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* NEWS: mention updated sv translation in news
+
+2014-02-14  Translation Project <coordinator@translationproject.org>
+
+	* po/sv.po: update sv translation from the translation project
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* NEWS: mention updated tr translation in news
+
+2014-02-14  Translation Project <coordinator@translationproject.org>
+
+	* po/tr.po: update tr translation from the translation project
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* NEWS: mention updated zh_CN in release news
+
+2014-02-14  Translation Project <coordinator@translationproject.org>
+
+	* po/zh_CN.po: update zh_CN translation from the translation project
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* NEWS, po/LINGUAS, po/zh_TW.po, po/zh_tw.po: rename zh_tw
+	translation to its proper zh_TW name
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* NEWS: mention updated nl, vi translations in release news
+
+2014-02-14  Translation Project <coordinator@translationproject.org>
+
+	* po/vi.po: update vi translation from the translation project
+
+2014-02-14  Translation Project <coordinator@translationproject.org>
+
+	* po/nl.po: update nl translation from the translation project
+
+2014-02-14  Will Estes <westes575@gmail.com>
+
+	* TODO: remove some unneeded entries from the todo list
+
+2014-02-13  Will Estes <westes575@gmail.com>
+
+	* doc/Makefile.am: list more generated files in CLEANFILES
+
+2014-02-13  Will Estes <westes575@gmail.com>
+
+	* doc/flex.xml: remove unmaintained xml documentation
+
+2014-02-13  Will Estes <westes575@gmail.com>
+
+	* configure.ac: bump AM_GNU_GETTEXT_VERSION to 0.18.1
+
+2014-02-13  Will Estes <westes575@gmail.com>
+
+	* README: list new location of flex git repo
+
+2014-02-13  Will Estes <westes575@gmail.com>
+
+	* po/.gitignore: git ignore generated files from english quoting
+	variant translations
+
+2014-02-13  Will Estes <westes575@gmail.com>
+
+	* po/LINGUAS: name english quoting variants correctly
+
+2014-02-13  Will Estes <westes575@gmail.com>
+
+	* Makefile.am, configure.ac, tools/Makefile.am: removed tools/
+	subdirectory from distribution Since it is not possible to rebuild the ChangeLog file without being
+	in a git working directory of flex, distributing the tools directory
+	is misleading. In particular, git2cl will always fail.
+
+2014-02-13  Will Estes <westes575@gmail.com>
+
+	* po/LINGUAS: removed unneeded blank line from translation list
+
+2014-02-13  Will Estes <westes575@gmail.com>
+
+	* po/LINGUAS: added en quoting variants to translation list
+
+2014-02-11  Will Estes <westes575@gmail.com>
+
+	* configure.ac: use gnu automake option instead of gnits option
+
+2014-02-11  Will Estes <westes575@gmail.com>
+
+	* README-alpha: remove README_alpha file since it is no longer
+	needed
+
+2014-02-10  Will Estes <westes575@gmail.com>
+
+	* configure.ac: increment version to 2.5.38
+
+2013-11-27  Will Estes <westes575@gmail.com>
+
+	* NEWS: flesh out internationalization section of NEWS file; mention
+	pt_BR translation
+
+2013-11-27  Translation Project <coordinator@translationproject.org>
+
+	* po/pt_BR.po: update pt_BR translation from the translation project
+
+2013-10-31  Will Estes <westes575@gmail.com>
+
+	* NEWS: begin listing 2.5.38 version in NEWS; list new sr
+	translation
+
+2013-10-31  Will Estes <westes575@gmail.com>
+
+	* po/LINGUAS: list new sr translation in list of translations
+
+2013-10-31  Will Estes <westes575@gmail.com>
+
+	* po/sr.po: add sr translation from the translation project
+
+2013-07-02  Till Varoquaux <till.varoquaux@gmail.com>
+
+	* configure.ac, flex.skl, nfa.c, tests/Makefile.am,
+	tests/test-lineno-trailing/.gitignore,
+	tests/test-lineno-trailing/Makefile.am,
+	tests/test-lineno-trailing/scanner.l,
+	tests/test-lineno-trailing/test.input: Adjust yylineno properly when
+	rewinding trailing contexts.
+
+2013-05-28  Will Estes <westes575@gmail.com>
+
+	* Makefile.am: Remove incorrect / in install-exec-hook target
+
+2013-02-16  Translation Project <coordinators@translationproject.org>
+
+	* po/LINGUAS, po/zh_tw.po: add zh_tw translation from the
+	translation project
+
+2012-12-06  Christoph Junghans <ottxor@gentoo.org>
+
+	* Makefile.am, configure.ac: add version information to shared
+	library Signed-off-by: Will Estes <westes575@gmail.com>
+
+2012-12-04  Christoph Junghans <ottxor@gentoo.org>
+
+	* .gitignore, Makefile.am, configure.ac, lib/Makefile.am: Build
+	libfl and libcompat using libtool; resolves #3586814 Signed-off-by: Will Estes <westes575@gmail.com>
+
+2012-12-04  Translation Project <coordinator@translationproject.org>
+
+	* po/ca.po: update ca translation
+
+2012-10-31  Hugh Sasse <hgs@dmu.ac.uk>
+
+	* tests/test-extended/Makefile.am, tests/test-quotes/Makefile.am: 
+	use cmp instead of diff in some tests for portability reasons Signed-off-by: Will Estes <westes575@gmail.com>
+
+2012-10-31  Dennis Clarke <dclarke@blastwave.org>
+
+	* tests/TEMPLATE/Makefile.am, tests/test-alloc-extra/Makefile.am,
+	tests/test-array-nr/Makefile.am, tests/test-array-r/Makefile.am,
+	tests/test-basic-nr/Makefile.am, tests/test-basic-r/Makefile.am,
+	tests/test-bison-nr/Makefile.am,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylval/Makefile.am,
+	tests/test-c++-basic/Makefile.am,
+	tests/test-c++-multiple-scanners/Makefile.am,
+	tests/test-c++-yywrap/Makefile.am, tests/test-c-cpp-nr/Makefile.am,
+	tests/test-c-cpp-r/Makefile.am, tests/test-ccl/Makefile.am,
+	tests/test-debug-nr/Makefile.am, tests/test-debug-r/Makefile.am,
+	tests/test-extended/Makefile.am, tests/test-header-nr/Makefile.am,
+	tests/test-header-r/Makefile.am,
+	tests/test-include-by-buffer/Makefile.am,
+	tests/test-include-by-push/Makefile.am,
+	tests/test-include-by-reentrant/Makefile.am,
+	tests/test-linedir-r/Makefile.am, tests/test-lineno-nr/Makefile.am,
+	tests/test-lineno-r/Makefile.am, tests/test-mem-nr/Makefile.am,
+	tests/test-mem-r/Makefile.am,
+	tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-r/Makefile.am,
+	tests/test-noansi-nr/Makefile.am, tests/test-noansi-r/Makefile.am,
+	tests/test-posix/Makefile.am,
+	tests/test-posixly-correct/Makefile.am,
+	tests/test-prefix-nr/Makefile.am, tests/test-prefix-r/Makefile.am,
+	tests/test-pthread/Makefile.am, tests/test-quotes/Makefile.am,
+	tests/test-reject/Makefile.am, tests/test-rescan-nr/Makefile.am,
+	tests/test-rescan-r/Makefile.am, tests/test-string-nr/Makefile.am,
+	tests/test-string-r/Makefile.am, tests/test-table-opts/Makefile.am,
+	tests/test-top/Makefile.am, tests/test-yyextra/Makefile.am: add
+	CFLAGS and CXXFLAGS options as appropriate to testsuite Makefile.am
+	files Signed-off-by: Will Estes <westes575@gmail.com>
+
+2012-10-25  Will Estes <westes575@gmail.com>
+
+	* po/LINGUAS: add hr to list of translations
+
+2012-10-25  Translation Project <coordinator@translationproject.org>
+
+	* po/hr.po: add hr translation from the translation project
+
+2012-10-25  Translation Project <coordinator@translationproject.org>
+
+	* po/fr.po: new fr translation project from the translation project
+
+2012-09-08  Will Estes <westes575@gmail.com>
+
+	* po/LINGUAS: update languages list to include esperanto translation
+
+2012-09-08  Translation Project <coordinator@translationproject.org>
+
+	* po/eo.po: add eo translation from the translation project
+
+2012-08-26  Will Estes <westes575@gmail.com>
+
+	* configure.ac: add dist-xz to automake options; resolves #3561837
+
+2012-08-26  Will Estes <westes575@gmail.com>
+
+	* autogen.sh, configure.ac: require gettext 0.18; force autoreconf
+	in autogen.sh; resolves #3561759 Autoconf had trouble finding the shared libraries for gettext. Using
+	gettext 0.18 fixes that.  When updating the gettext version number, autoreconf could fail to
+	update files, since autopoint would assume the gettext-related files
+	had been locally modified. Passing --force prevents that from
+	happening.
+
+2012-08-15  Will Estes <westes575@gmail.com>
+
+	* Makefile.am: remove README.cvs from dist_doc_DATA in Makefile.am
+
+2012-08-13  Will Estes <westes575@gmail.com>
+
+	* : commit 9256a268e2a1000cb410766e95487912a7d66d61 Author: Will
+	Estes <westes575@gmail.com> Date:   Mon Aug 13 16:23:35 2012 -0400
+
+2012-08-08  Will Estes <westes575@gmail.com>
+
+	* README, README.cvs: append README.cvs contents to README
+
+2012-08-08  Will Estes <westes575@gmail.com>
+
+	* gen.c: fix m4 error when useecs and nultrans are true; resolves
+	#1816878
+
+2012-08-08  Robert Minsk <rminsk@users.sourceforge.net>
+
+	* flex.skl: put user code after yyguts init; resolves #1744516 Signed-off-by: Will Estes <westes575@gmail.com>
+
+2012-08-08  Robert Minsk <rminsk@users.sourceforge.net>
+
+	* flex.skl, main.c: do not output yy_nxt to header with %option
+	full; resolves #1739922 Signed-off-by: Will Estes <westes575@gmail.com>
+
+2012-08-07  Will Estes <westes575@gmail.com>
+
+	* main.c: let flex decide if yymore and  reject are needed in lex
+	compatible mode This resolves bug #3510440.
+
+2012-08-06  Translation Project <coordinator@translationproject.org>
+
+	* po/vi.po: new vi translation from the translation project
+
+2012-08-06  Will Estes <westes575@gmail.com>
+
+	* .gitignore: add more patterns to .gitignore Undersome circumstances, the build process will generate conf.in~,
+	which we want to ignore. Also, some patch files will apply but not
+	cleanly and *.orig and *.rej files are generated. We want to ignore
+	them as well.
+
+2012-08-06  Will Estes <westes575@gmail.com>
+
+	* configure.ac, configure.in: rename configure.in to configure.ac to
+	prep for upcoming automake changes
+
+2012-08-06  Elias Pipping <pipping@users.sourceforge.net>
+
+	* tests/test-bison-yylloc/main.c, tests/test-bison-yylloc/parser.y,
+	tests/test-bison-yylval/main.c, tests/test-bison-yylval/parser.y: 
+	Fix two tests to pass under bison 2.6 Given that bison is moving forward with the %parse-param instead of
+	YYPARSE_PARAM syntax, it makes sense to switch over to using the new
+	style declaration. In particular, this means that flex scanners that
+	use bison features will now require bison 2.6 or higher.  Signed-off-by: Will Estes <westes575@gmail.com>
+
+2012-08-04  Will Estes <westes575@gmail.com>
+
+	* po/nl.po: new nl translation from the translation project
+
+2012-08-04  Mike Frysinger <vapier@gentoo.org>
+
+	* flexdef.h: add prototype for lerrsf_fatal to flexdef.h Signed-off-by: Will Estes <westes575@gmail.com>
+
+2012-08-04  nomis52 <nomis52@users.sourceforge.net>
+
+	* flex.skl, gen.c: Change variable types to silence compiler
+	warnings; resolves #3552806 Signed-off-by: Will Estes <westes575@gmail.com>
+
+2012-08-03  Will Estes <westes575@gmail.com>
+
+	* NEWS: update NEWS to reflect changes in 2.5.37
+
+2012-08-03  Will Estes <westes575@gmail.com>
+
+	* configure.in: update flex version to 2.5.37
+
+2012-08-03  Will Estes <westes575@gmail.com>
+
+	* po/de.po: new de translation from the translation project
+
+2012-08-02  Will Estes <westes575@gmail.com>
+
+	* po/vi.po: new vi translation from the translation project
+
+2012-08-02  Will Estes <westes575@gmail.com>
+
+	* po/pl.po: new pl translation from the translation project
+
+2012-08-02  Will Estes <westes575@gmail.com>
+
+	* po/fi.po: new fi translation from the translation project
+
+2012-08-02  Will Estes <westes575@gmail.com>
+
+	* Makefile.am: Add -f option to LN_S to create flex++ The autoconf macro LN_S needs -f to successfully install flex++ if
+	flex++ already exists. Fortunately, ln, ln -s and cp -p, which are
+	the various forms that LN_S can take all will do the right thing
+	with a -f argument passed.
+
+2012-08-02  Will Estes <westes575@gmail.com>
+
+	* Makefile.am, tools/Makefile.am, tools/cvs2cl.pl,
+	tools/cvsauthors, tools/git2cl: replace cvs2cl with git2cl Add the git2cl script in tools/ and remove the (now unnecessary)
+	cvs2cl script. Remove tools/cvsauthors since git2cl does not need
+	that file.  Account for all the above in Makefile.am and
+	tools/Makefile.am
+
+2012-07-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/.cvsignore, tests/.gitignore, tests/TEMPLATE/.cvsignore,
+	tests/TEMPLATE/.gitignore, tests/test-alloc-extra/.cvsignore,
+	tests/test-alloc-extra/.gitignore, tests/test-array-nr/.cvsignore,
+	tests/test-array-nr/.gitignore, tests/test-array-r/.cvsignore,
+	tests/test-array-r/.gitignore, tests/test-basic-nr/.cvsignore,
+	tests/test-basic-nr/.gitignore, tests/test-basic-r/.cvsignore,
+	tests/test-basic-r/.gitignore, tests/test-bison-nr/.cvsignore,
+	tests/test-bison-nr/.gitignore, tests/test-bison-yylloc/.cvsignore,
+	tests/test-bison-yylloc/.gitignore,
+	tests/test-bison-yylval/.cvsignore,
+	tests/test-bison-yylval/.gitignore,
+	tests/test-c++-basic/.cvsignore, tests/test-c++-basic/.gitignore,
+	tests/test-c++-multiple-scanners/.cvsignore,
+	tests/test-c++-multiple-scanners/.gitignore,
+	tests/test-c++-yywrap/.cvsignore, tests/test-c++-yywrap/.gitignore,
+	tests/test-c-cpp-nr/.cvsignore, tests/test-c-cpp-nr/.gitignore,
+	tests/test-c-cpp-r/.cvsignore, tests/test-c-cpp-r/.gitignore,
+	tests/test-ccl/.cvsignore, tests/test-ccl/.gitignore,
+	tests/test-concatenated-options/.cvsignore,
+	tests/test-concatenated-options/.gitignore,
+	tests/test-debug-nr/.cvsignore, tests/test-debug-nr/.gitignore,
+	tests/test-debug-r/.cvsignore, tests/test-debug-r/.gitignore,
+	tests/test-extended/.cvsignore, tests/test-extended/.gitignore,
+	tests/test-header-nr/.cvsignore, tests/test-header-nr/.gitignore,
+	tests/test-header-r/.cvsignore, tests/test-header-r/.gitignore,
+	tests/test-include-by-buffer/.cvsignore,
+	tests/test-include-by-buffer/.gitignore,
+	tests/test-include-by-push/.cvsignore,
+	tests/test-include-by-push/.gitignore,
+	tests/test-include-by-reentrant/.cvsignore,
+	tests/test-include-by-reentrant/.gitignore,
+	tests/test-linedir-r/.cvsignore, tests/test-linedir-r/.gitignore,
+	tests/test-lineno-nr/.cvsignore, tests/test-lineno-nr/.gitignore,
+	tests/test-lineno-r/.cvsignore, tests/test-lineno-r/.gitignore,
+	tests/test-mem-nr/.cvsignore, tests/test-mem-nr/.gitignore,
+	tests/test-mem-r/.cvsignore, tests/test-mem-r/.gitignore,
+	tests/test-multiple-scanners-nr/.cvsignore,
+	tests/test-multiple-scanners-nr/.gitignore,
+	tests/test-multiple-scanners-r/.cvsignore,
+	tests/test-multiple-scanners-r/.gitignore,
+	tests/test-noansi-nr/.cvsignore, tests/test-noansi-nr/.gitignore,
+	tests/test-noansi-r/.cvsignore, tests/test-noansi-r/.gitignore,
+	tests/test-posix/.cvsignore, tests/test-posix/.gitignore,
+	tests/test-posixly-correct/.cvsignore,
+	tests/test-posixly-correct/.gitignore,
+	tests/test-prefix-nr/.cvsignore, tests/test-prefix-nr/.gitignore,
+	tests/test-prefix-r/.cvsignore, tests/test-prefix-r/.gitignore,
+	tests/test-pthread/.cvsignore, tests/test-pthread/.gitignore,
+	tests/test-quotes/.cvsignore, tests/test-quotes/.gitignore,
+	tests/test-reject/.cvsignore, tests/test-reject/.gitignore,
+	tests/test-rescan-nr/.cvsignore, tests/test-rescan-nr/.gitignore,
+	tests/test-rescan-r/.cvsignore, tests/test-rescan-r/.gitignore,
+	tests/test-string-nr/.cvsignore, tests/test-string-nr/.gitignore,
+	tests/test-string-r/.cvsignore, tests/test-string-r/.gitignore,
+	tests/test-table-opts/.cvsignore, tests/test-table-opts/.gitignore,
+	tests/test-top/.cvsignore, tests/test-top/.gitignore,
+	tests/test-yyextra/.cvsignore, tests/test-yyextra/.gitignore: rename
+	.cvsignore files in tests/ subdirectories to gitignore
+
+2012-07-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* examples/.cvsignore, examples/fastwc/.cvsignore,
+	examples/manual/.cvsignore, lib/.cvsignore, tools/.cvsignore: remove
+	unneeded .cvsignore files
+
+2012-07-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* .gitignore: add *.o and *.a to top level .gitignore The cvs tree did not need these additions because cvs assumed a lot
+	of C-style defaults for .cvsignore files. flex builds *.o object
+	files in the course of compilation and *.a files are built as a part
+	of the libraries that flex compiles in the build process.
+
+2012-07-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* .cvsignore, .gitignore, doc/.cvsignore, doc/.gitignore,
+	m4/.cvsignore, m4/.gitignore, po/.cvsignore, po/.gitignore: rename
+	.cvsignore files to .gitignore The .cvsignore files from the legacy cvs repository tracked what
+	files got autogenerated during various stages of the flex build.
+	Renaming the .cvsignore files to .gitignore lets git do the same
+	thing. git is better about letting higher level .gitignore files
+	not-track files in lower level directories. As I work my way through
+	the test directories, we may add additional .gitignore files from
+	the old .cvsignore files.  The po/ directory has a lot of special files used by gettext, so the
+	patterns in po/.gitignore look very different.  The doc/.gitignore file accounts for what texinfo/makeinfo do, and
+	so it also has special patterns.  The m4 directory is mainly present for autoconf's benefit, but we
+	have to account for it so make can do the right thing. Hence,
+	m4/.gitignore says to ignore *.m4, as counterintuitive as that may
+	seem.
+
+2012-07-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: update NEWS file to note release date of 2.5.36
+
+2012-06-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: fix call to version in manual
+
+2012-06-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: add missing argument to call to yylex in manual
+
+2012-04-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: lintish cleanup in flex.skl; resolves #2040664
+
+2012-04-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: add a 7 to the c99 octal pattern; resolves #3518269
+
+2012-03-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: copyedit; resolves #3513670
+
+2012-03-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* buf.c: escape backslashes in #line filenames in %top section;
+	resolves #3212400; patch submitted by scfc_de
+
+2012-03-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, configure.in, lib/Makefile.am, lib/lib.c,
+	lib/malloc.c, lib/realloc.c: provide malloc() and realloc() for
+	systems that do not have satisfactory versions; resolves #1899047
+
+2012-03-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: install flex++ as a link; resolves bug #2939681
+
+2012-03-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-bison-nr/Makefile.am,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylval/Makefile.am: fix dependencies for make -j in
+	test suite
+
+2012-03-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: add missing prototypes for yyset_column() and
+	yyget_column(); resolves #3029024; patch submitted by scfc_de
+
+2012-03-02  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl, tests/test-reject/scanner.l,
+	tests/test-table-opts/scanner.l: wrap yy_fatal_error calls
+	appropriately
+
+2012-03-02  Will Estes <wlestes@users.sourceforge.net>
+
+	* regex.c: fix overlapping data buffer issue; patch from Tim
+	Landsheet scfc_de
+
+2012-03-02  Will Estes <wlestes@users.sourceforge.net>
+
+	* scan.l: better bracket handling in the scanner
+
+2012-03-02  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexdef.h, main.c, misc.c: Remove unneeded tracking of line/column
+	output; patch from Tim Landsheet scfc_de
+
+2012-03-02  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: fix test for m4 to accept an m4 with -P and not jus
+	tGNU m4; patch from Tim Landsheet scfc_de on sourceforge
+
+2012-03-02  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: fix order of td_lolen and td_hilen in
+	documentation; resolves #2913693; patch submitted by Andreas
+	Gruenbacher <agruen@suse.de>
+
+2012-03-02  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: correct document of YY_FLUSH_BUFFER; resolves
+	#1723028
+
+2012-02-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* dfa.c, flexdef.h, misc.c, parse.y: speed up things for complex
+	inputs; resolves #2891390
+
+2012-02-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: fix ipv6 pattern in manual; update manual copyright
+	to 2012
+
+2012-02-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: fremove isatty() declaration; resolves #1984987
+
+2012-02-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: Add link for RFC 2396
+
+2012-02-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: resolve #1990170
+
+2012-02-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: fix documentation to reflect arguments actually used;
+	bug #2783023
+
+2012-02-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* main.c: fix yywrap behavior for reentrant scanners
+
+2012-02-04  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: Mmention tr translation
+
+2012-02-04  Will Estes <wlestes@users.sourceforge.net>
+
+	* tables.c: prevent unused stuff from being compiled so as to reduce
+	warnings
+
+2012-02-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* buf.c, filter.c, main.c, misc.c, regex.c, scanflags.c: more better
+	error messages; more better memory handling
+
+2012-02-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* misc.c: more careful/paranoia
+
+2012-02-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* scanopt.c: more careful memory allocation in option processing
+
+2012-02-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, configure.in: remove m4/ directory and generally
+	clean up automake/autoconf inputs
+
+2012-02-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* lib/.cvsignore: cvsignore files that need that
+
+2012-02-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/da.po, po/es.po, po/ko.po, po/pt_BR.po, po/ro.po,
+	po/ru.po, po/sv.po, po/tr.po, po/zh_CN.po: check in translations
+
+2012-02-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* main.c: correct macro definition of yywrap
+
+2012-02-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* scan.l: Greater specificity in error messages
+
+2012-02-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* parse.y: improve rule handling at EOF
+
+2012-02-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: include cstdio for definition of EOF in all cases
+
+2012-02-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: suppress warning on unused yyguts_t
+
+2010-08-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/LINGUAS, po/fi.po: new fi translation from the
+	translation project
+
+2009-03-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: 	Include version.texi after @setfilename, 	so that @set values are correctly evaluated.  	(Start Conditions, Performance, Lex and Posix): Fix some 	markup errors.  	(Cxx): Likewise.  Also, fix C++ example to actually be 	compilable. Patch from Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+2008-12-28  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: remove line break that broke configure
+
+2008-12-28  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: specify the title on the title page since @settitle
+	doesn't do that for us; resolves bug #2043491
+
+2008-12-28  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in, flexdef.h: check for regex.h; resolves bug #2337486
+
+2008-07-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/ga.po: new ga translation from the translation project
+
+2008-06-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/ca.po: new ca translation
+
+2008-05-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: move ABOUT-NLS back to EXTRA_DIST
+
+2008-05-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: create new dist_doc_DATA; move some EXTRA_DIST files
+	to new dist_doc_DATA target
+
+2008-05-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* .cvsignore: ignore more automake generated config.status* files
+
+2008-05-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: flex distribution now built with automake and autoconf
+	versions ...
+
+2008-05-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* README.cvs: document GNU auto* version changes for building flex
+	from cvs
+
+2008-05-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* .cvsignore, doc/Makefile.am: ignore automake-supplied ylwrap
+
+2008-05-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, flex.skl: clean up types; resolves 1961902
+
+2008-05-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: update NEWS re manual
+
+2008-05-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: correct eroneous references to 'nowrap' to refer to
+	'noyywrap'; resolves bug #1739912
+
+2008-05-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* filter.c: call clearerr on stdin before dup2'ing it; resolves bug
+	#1902612
+
+2008-05-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: generic updates to NEWS
+
+2008-05-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-pthread/Makefile.am: move library flags in linker
+	command; resolves patch #1943403; patch submitted by
+	nullnix@users.sourceforge.net
+
+2008-05-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: use ansi syntax in simple examples; resolves patch
+	#1909844; patch submitted by Tom Browder,
+	tbrowder2@users.sourceforge.net
+
+2008-04-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: fix typo in example (from Paolo J. Matos
+
+2008-04-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexint.h: move endif to better account for what C99 defines for
+	integer types (fix from debian project)
+
+2008-04-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* gen.c: fix another int type to be size_t
+
+2008-03-30  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/fr.po: new fr translation
+
+2008-03-30  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: start version 2.5.36
+
+2008-02-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: add date of release
+
+2008-02-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, parse.y: fix bug that prevented comments from working
+	properly
+
+2008-02-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/de.po: new de translation
+
+2008-02-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/vi.po: new vi translation
+
+2008-02-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/nl.po: new nl translation
+
+2008-02-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/pl.po: new pl translation
+
+2008-02-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/de.po, po/pt_BR.po: new de, pt_br translations
+
+2008-02-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, flex.skl: generate headers for all functions (resolves bug
+	#1628314)
+
+2008-02-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, flex.skl: change yy_size_t to be size_t (resolves bug
+	#1849812)
+
+2008-02-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: start work on version 2.5.35
+
+2007-12-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: revert NEWS and configure.in to version 2.5.34
+
+2007-09-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: update version number to 2.5.35
+
+2007-09-10  Aaron Stone <sodabrew@users.sourceforge.net>
+
+	* tests/test-alloc-extra/scanner.l: Use %option extra-type.
+
+2007-09-10  Aaron Stone <sodabrew@users.sourceforge.net>
+
+	* NEWS, doc/flex.texi, flex.skl, flexdef.h, main.c, parse.y, scan.l: 
+	Introduce %option extra-type="your_type *" (resolves bug #1744505).
+
+2007-08-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/nl.po: new nl translations from the translation project
+
+2007-06-28  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: change release date
+
+2007-06-28  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: adjustment for prefix classes; patch submitted by Petr
+	Machata <pmachata@redhat.com>
+
+2007-06-28  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: NEWS item for yy_init_extra
+
+2007-06-12  Aaron Stone <sodabrew@users.sourceforge.net>
+
+	* doc/flex.texi: Docs and example for yylex_init_extra.
+
+2007-06-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-alloc-extra/.cvsignore: ignore OUTPUT file in
+	test-alloc-extra
+
+2007-06-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/descriptions: add description of concatenated options test
+
+2007-05-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-alloc-extra/.cvsignore: add missing .cvsignore to
+	test-alloc-extra
+
+2007-05-31  Aaron Stone <sodabrew@users.sourceforge.net>
+
+	* configure.in, flex.skl, gen.c, main.c: Changes to resolve SF bugs
+	1568325 and 1563589.
+
+2007-05-31  Aaron Stone <sodabrew@users.sourceforge.net>
+
+	* tests/Makefile.am, tests/descriptions,
+	tests/test-alloc-extra/Makefile.am,
+	tests/test-alloc-extra/scanner.l, tests/test-alloc-extra/test.input: 
+	Adding test cases for yylex_init_extra.
+
+2007-05-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in, tests/test-pthread/scanner.l: fixes to test-pthread
+
+2007-05-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: NEWS item for concatenated options
+
+2007-05-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in, tests/Makefile.am,
+	tests/test-concatenated-options/.cvsignore,
+	tests/test-concatenated-options/Makefile.am: unit test to verify
+	concatenated options parsing
+
+2007-05-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* scanopt.c: parse multiple short concatenated options; patch
+	submitted by Petr Machata <pmachata@redhat.com
+
+2007-05-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* autogen.sh: remove --force option from autogen.sh; much faster
+	without it
+
+2007-05-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.34
+
+2007-05-08  Aaron Stone <sodabrew@users.sourceforge.net>
+
+	* NEWS, flex.skl: Better checking after yyalloc/yyrealloc (resolves
+	bug #1595967)
+
+2007-05-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: change title of manual to 'Lexical Analysis with
+	Flex'
+
+2007-04-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: c++ memory leak plug
+
+2007-04-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: roll back c++ memory patch as it causes the test suite
+	no end of grief
+
+2007-04-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: fix function definitions for non-ANSI environments (from
+	Manoj Srivastava from Debian patchset)
+
+2007-04-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: fix c++ memory leak (from Manoj Srivastava from Debian
+	patchset)
+
+2007-04-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: fix parameter name in comment (patch from Manoj
+	Srivastava from the debian patchset
+
+2007-04-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: add a size_t cast (patch from Manoj Srivastava from the
+	debian patchset
+
+2007-04-16  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-extended/Makefile.am, tests/test-quotes/Makefile.am: 
+	cleanups to handle VPATH builds better; passifies make distcheck
+
+2007-04-16  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: drop using the \ in \ escaping as it throws pdf
+	generation for a loop
+
+2007-04-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* .cvsignore: add compile and *.tar.bz2 to .cvsignore
+
+2007-04-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* main.c: add call to setlocale for ctype as per debian patchset
+
+2007-04-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, NEWS: provide for a PIC version of libfl.a for shared
+	libraries using flex scanners
+
+2007-04-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* FlexLexer.h: annotate endifs since they're a bit far from their
+	opening #if statements
+
+2007-04-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexdef.h, parse.y: refactor and slightly redo alloca testing,
+	resolves bug #1675899
+
+2007-04-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* : overhaul configure.in: use octathorps for comments so they're
+	passed through m4 processing; better bracketing of m4 arguments;
+	retool checks as per suggestions from autoscan(1)
+
+2007-04-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: fix skeleton for reentrant scanners
+
+2007-04-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: remove homegrown tags target; automake does that for
+	us
+
+2007-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: fix skeleton for reentrant scanners, resolves bug
+	#1694318
+
+2007-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* FlexLexer.h: declare some const where missing in c++ header file
+
+2007-04-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: corrections to the manual as per suggestions from
+	flex-help@
+
+2007-04-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: include author names in online versions of the
+	manual
+
+2007-04-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* COPYING: update copyright notice
+
+2007-04-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* AUTHORS: rearrange and update AUTHORS
+
+2007-03-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: note sf feature request 1658379 in NEWS
+
+2007-03-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* tools/cvsauthors: add sodabrew to cvsauthors file
+
+2007-03-29  Aaron Stone <sodabrew@users.sourceforge.net>
+
+	* flex.skl: SourceForge feature request #1658379: Expose YY_BUF_SIZE
+	in the header file.
+
+2007-03-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, filter.c, flex.skl: apply patches submitted by sodabrew
+
+2007-03-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* README.cvs: more changes describing building flex from cvs
+
+2007-03-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, README.cvs, README.cvs-snapshot: rename
+	README.cvs-snapshot to README.cvs
+
+2007-03-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* README.cvs-snapshot: update to explain where flex cvs lives
+
+2007-03-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* README, doc/flex.texi: correct how to submit bugs
+
+2007-02-16  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: clarify NEWS item re man page and pdf manual
+
+2007-02-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/Makevars: update bug address to point to flex-devel instead of
+	lex-help
+
+2007-02-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in, doc/Makefile.am: make better use of AC_INIT; clean
+	up, simplify and make more robust the generation of the man page
+
+2007-02-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: remove option check-news from call to
+	AM_INIT_AUTOMAKE as gnits implies check-news
+
+2007-02-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, configure.in: move automake options from Makefile.am
+	to configure.in
+
+2007-02-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* autogen.sh: restore --install option to autogen.sh since --force
+	does not imply --install
+
+2007-02-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* tools/cvsauthors: add john43 to cvsauthors file
+
+2007-02-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* autogen.sh: call autoreconf with --force instead of --install
+
+2007-02-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/.cvsignore: remove texinfo.tex from cvs tree
+
+2007-02-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: updates to NEWS file to reflect recent changes
+
+2007-02-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/Makefile.am: add flex.pdf to EXTRA_DIST
+
+2007-02-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: remove flex.spec
+
+2007-02-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: remove maintainercleanfiles
+
+2007-02-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/Makefile.am: more changes to build system to distribute man
+	page
+
+2007-02-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/Makefile.am: add flex man page to distribution
+
+2007-02-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* .cvsignore, flex.spec.in: remove flex spec file
+
+2006-11-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-table-opts/Makefile.am: make test target depend on test
+	groupings, which in turn depend on building executables; cygwin
+	portability fix
+
+2006-11-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/create-test: change create-test script to edit files in
+	place
+
+2006-11-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-array-nr/Makefile.am, tests/test-array-r/Makefile.am,
+	tests/test-basic-nr/Makefile.am, tests/test-basic-r/Makefile.am,
+	tests/test-bison-nr/Makefile.am,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylval/Makefile.am,
+	tests/test-c++-basic/Makefile.am,
+	tests/test-c++-multiple-scanners/Makefile.am,
+	tests/test-c++-yywrap/Makefile.am, tests/test-c-cpp-nr/Makefile.am,
+	tests/test-c-cpp-r/Makefile.am, tests/test-ccl/Makefile.am,
+	tests/test-debug-nr/Makefile.am, tests/test-debug-r/Makefile.am,
+	tests/test-extended/Makefile.am, tests/test-header-nr/Makefile.am,
+	tests/test-header-r/Makefile.am,
+	tests/test-include-by-buffer/Makefile.am,
+	tests/test-include-by-push/Makefile.am,
+	tests/test-include-by-reentrant/Makefile.am,
+	tests/test-linedir-r/Makefile.am, tests/test-lineno-nr/Makefile.am,
+	tests/test-lineno-r/Makefile.am, tests/test-mem-nr/Makefile.am,
+	tests/test-mem-r/Makefile.am,
+	tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-r/Makefile.am,
+	tests/test-noansi-nr/Makefile.am, tests/test-noansi-r/Makefile.am,
+	tests/test-posix/Makefile.am,
+	tests/test-posixly-correct/Makefile.am,
+	tests/test-prefix-nr/Makefile.am, tests/test-prefix-r/Makefile.am,
+	tests/test-pthread/Makefile.am, tests/test-quotes/Makefile.am,
+	tests/test-reject/Makefile.am, tests/test-rescan-nr/Makefile.am,
+	tests/test-rescan-r/Makefile.am, tests/test-string-nr/Makefile.am,
+	tests/test-string-r/Makefile.am, tests/test-top/Makefile.am,
+	tests/test-yyextra/Makefile.am: change CLEANFILES to include
+	instead of just the testname for the executable
+
+2006-11-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: fix typos in manual; resolves bug #1592857
+
+2006-11-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am: change test template to remove test
+	executable when that executable has an extension, e.g. under Cygwin
+
+2006-11-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/Makefile.am: test names weren't displaying in test
+	success/failure messages (from #1591672
+
+2006-10-30  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/.cvsignore: add flex.html to .cvsignore in doc directory
+
+2006-10-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: update NEWS file for the work that millaway did
+
+2006-10-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* FlexLexer.h, NEWS, main.c,
+	tests/test-c++-multiple-scanners/scanner-2.l: make yywrap work with
+	c++ scanners as per sf bug report
+
+2006-10-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, flex.skl, tests/test-c++-multiple-scanners/main.cpp,
+	tests/test-c-cpp-nr/scanner.l: memory leak issues in c++ scanner
+
+2006-10-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in, tests/Makefile.am, tests/descriptions,
+	tests/test-c++-yywrap/.cvsignore,
+	tests/test-c++-yywrap/Makefile.am, tests/test-c++-yywrap/scanner.l,
+	tests/test-c++-yywrap/test.input: add unit test for c++ with yywrap
+
+2006-10-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, tests/test-c++-basic/Makefile.am,
+	tests/test-linedir-r/Makefile.am: use configure-provided awk
+	variable for portability; add loadlibes variable to c++ test
+
+2006-10-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/flex.texi: add noyywrap option to example; use whitespace to
+	clarify example
+
+2006-08-02  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/ca.po, po/vi.po: new translations
+
+2006-04-11  John Millaway <john43@users.sourceforge.net>
+
+	* tables.c: Casted away signedness to appease -Werror freaks.
+
+2006-03-28  John Millaway <john43@users.sourceforge.net>
+
+	* ccl.c, doc/flex.texi, flexdef.h, parse.y, scan.l, sym.c,
+	tests/test-ccl/scanner.l, tests/test-ccl/test.input: Added ccl union
+	operator.  Added test in test suite for ccl union operator.
+	Documented ccl union operator.  Removed crufty ccl cache to prevent
+	parser problems.
+
+2006-03-28  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi, scan.l, tests/test-extended/scanner.l,
+	tests/test-extended/test.input: Extended syntax excluded for
+	lex/posix compat mode.  Comments discarded inside (?x:) patterns.
+	Added test in test suite for comments in extended patterns.
+	Documented syntax additions.
+
+2006-03-27  John Millaway <john43@users.sourceforge.net>
+
+	* scan.l, tests/test-ccl/scanner.l, tests/test-ccl/test.input: 
+	Implemented (?x:) syntax to allow whitespace in patterns.  Added
+	test for (?x:) syntax in test suite.
+
+2006-03-27  John Millaway <john43@users.sourceforge.net>
+
+	* parse.y, tests/test-ccl/scanner.l, tests/test-ccl/test.input: 
+	Implemented dot-all syntax.  Added test for dot-all syntax in test
+	suite.
+
+2006-03-27  John Millaway <john43@users.sourceforge.net>
+
+	* dfa.c, doc/flex.texi, flexdef.h, gen.c, main.c, parse.y, scan.l,
+	scanflags.c, tests/test-ccl/scanner.l, tests/test-ccl/test.input: 
+	Removed global variable caseins.  Added scanner stack flags for
+	case-insensitivity.  Moved case-folding code from DFA-generation to
+	parse time read-macros.  Added localized case-sensitivity syntax
+	from Perl.  Added test for new syntax in test suite.  Documented new
+	syntax.
+
+2006-03-27  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am, configure.in, flexdef.h, scanflags.c: Added configure
+	check for assert.h.  Added scanner flags stack.
+
+2006-03-25  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, doc/flex.texi, scan.l, tests/Makefile.am,
+	tests/descriptions, tests/test-extended/.cvsignore,
+	tests/test-extended/Makefile.am, tests/test-extended/scanner.l,
+	tests/test-extended/test.input: Added extended, perl-compatible
+	comment syntax.  Added test for extended comment syntax.  Documented
+	extended comment syntax.
+
+2006-03-25  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi, parse.y: Changed explicit 'A'-'Z' to isupper(),
+	where correct to do so.  Documentation.
+
+2006-03-24  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi: Documentation.
+
+2006-03-24  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi: Added appendix of patterns to manual.
+
+2006-03-23  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi: .
+
+2006-03-22  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi: Documentation.
+
+2006-03-22  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi: Documented set difference operator {-}.
+
+2006-03-22  John Millaway <john43@users.sourceforge.net>
+
+	* ccl.c, flexdef.h, parse.y, scan.l, tests/test-ccl/scanner.l,
+	tests/test-ccl/test.input: Added set difference operator {-} for
+	character classes.
+
+2006-03-22  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, doc/flex.texi, parse.y, scan.l, tests/Makefile.am,
+	tests/descriptions, tests/test-ccl/.cvsignore,
+	tests/test-ccl/Makefile.am, tests/test-ccl/scanner.l,
+	tests/test-ccl/test.input: Added negated character class
+	expressions.  Documented negated character class expressions.  Added
+	regression test for negated character class expressions.
+
+2006-03-22  John Millaway <john43@users.sourceforge.net>
+
+	* buf.c, filter.c, gen.c, main.c, misc.c, nfa.c, parse.y, regex.c: 
+	Replaced sprintf with snprintf everywhere.
+
+2006-03-22  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am: Removed includedir from AM_CPPFLAGS #1439351.
+
+2006-03-21  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, tests/Makefile.am, tests/descriptions,
+	tests/test-quotes/.cvsignore, tests/test-quotes/Makefile.am,
+	tests/test-quotes/scanner.l, tests/test-quotes/test.input: Added
+	test to verify user code is unmangled.
+
+2006-03-21  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h, misc.c, scan.l: Fixed escape in actions.
+
+2006-03-21  John Millaway <john43@users.sourceforge.net>
+
+	* filter.c, flexdef.h, main.c, scan.l: Reverted previous input
+	filter changes.  Added noop macro to scanner output.  Modified
+	scan.l to escape m4 quotes found in user code.
+
+2006-03-21  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-table-opts/Makefile.am,
+	tests/test-table-opts/scanner.l: Removed m4 from test-table-opts
+
+2006-03-21  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-reject/Makefile.am, tests/test-reject/scanner.l: 
+	Removed m4 from test-reject
+
+2006-03-21  John Millaway <john43@users.sourceforge.net>
+
+	* filter.c, flexdef.h, main.c, scan.l: Moved set_input_file to
+	different file.
+
+2006-03-21  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, flexdef.h, flexint.h, misc.c: Relaxed tests for __STDC__
+	and __STDC_VERSION__ to cope with bugs in GCC and Sun cc.
+
+2006-03-20  John Millaway <john43@users.sourceforge.net>
+
+	* filter.c: Documented filter chain. Removed fdopen. Added no-op
+	fseek.
+
+2006-03-13  John Millaway <john43@users.sourceforge.net>
+
+	* gen.c: Fixed another -Wall report.
+
+2006-03-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/vi.po: new vi translation
+
+2006-03-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/ga.po, po/nl.po: new nl, ga translations
+
+2006-02-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* m4/Makefile.am: add po.m4 to extra_dist in m4/ so it gets picked
+	up by distributions
+
+2006-02-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* m4/Makefile.am: add nls.m4 to extra_dist in m4/ so it will get
+	picked up in distribution tarballs
+
+2006-02-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: remove website directory from configure.in
+
+2006-02-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.33 marks in NEWS and configure.in
+
+2006-02-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: change email address in configure.in to point to
+	flex-help@sourceforge.net
+
+2006-02-20  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi: Documentation.
+
+2006-02-20  John Millaway <john43@users.sourceforge.net>
+
+	* BUGS: Appended to BUGS file.
+
+2006-02-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: remove website directory (since it now has its own
+	module in the flex project
+
+2006-02-16  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi, flex.skl: Fixed buffer overflow in reject state
+	buffer.  Corrected documentation on the state buffer.
+
+2006-02-16  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Reverted num_read from size_t back to int.
+
+2006-02-15  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am, configure.in: Removed reference to RoadMap in
+	Makefile.am.  Added website directory.
+
+2006-02-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* README, RoadMap: remove RoadMap and reference to it in README
+
+2006-02-15  John Millaway <john43@users.sourceforge.net>
+
+	* BUGS, README, doc/flex.texi, doc/flex.xml: Eliminated references
+	to lex.sf.net.
+
+2006-02-15  John Millaway <john43@users.sourceforge.net>
+
+	* BUGS, flex.skl: Transfered bugs list from lex.sf.net to BUGS file.
+
+2006-02-15  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-rescan-nr/.cvsignore,
+	tests/test-rescan-nr/Makefile.am, tests/test-rescan-nr/scanner.l,
+	tests/test-rescan-nr/test.input, tests/test-rescan-r/.cvsignore,
+	tests/test-rescan-r/Makefile.am, tests/test-rescan-r/scanner.l,
+	tests/test-rescan-r/test.input: Recommit of last commit -- broken
+	pipe.
+
+2006-02-15  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, flex.skl, tests/Makefile.am, tests/descriptions: 
+	yy_lex_destroy calls yy_init_globals to reset everything for next
+	call to yylex.  Added two new tests for reusing scanners.
+
+2006-02-14  John Millaway <john43@users.sourceforge.net>
+
+	* flex.spec.in: Patched rpm spec file.
+
+2006-02-14  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, flexint.h: Added C99 macro for inttypes, just to be
+	conformant.
+
+2006-02-14  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h, nfa.c, parse.y: Changed symbol INFINITE to fix conflict
+	with C math symbol.
+
+2006-02-14  John Millaway <john43@users.sourceforge.net>
+
+	* scan.l: Omitting parens for named rules in trailing context.
+
+2006-02-14  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, main.c, po/ca.po, po/da.po, po/de.po, po/es.po,
+	po/fr.po, po/ga.po, po/ko.po, po/nl.po, po/pl.po, po/pt_BR.po,
+	po/ro.po, po/ru.po, po/sv.po, po/tr.po, po/vi.po, po/zh_CN.po,
+	tests/test-mem-nr/scanner.l, tests/test-mem-r/scanner.l: Added check
+	for locale.h and libintl.h in configure script.
+
+2006-02-14  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Removed unused local vars.
+
+2006-02-14  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Removed certain offending #undefs.
+
+2006-02-14  John Millaway <john43@users.sourceforge.net>
+
+	* flexint.h: Removed logical and from preprocessor statement.
+
+2006-02-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/nl.po, po/nl.po.1: remove eroneously named nl.po.1; update
+	nl.po
+
+2006-02-14  John Millaway <john43@users.sourceforge.net>
+
+	* dfa.c: .
+
+2006-02-14  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Included <sys/types.h> for serialized tables.
+
+2006-02-14  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in: Minor patch to call to head in configure script.
+
+2006-02-14  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi: Documentation patch.
+
+2006-02-14  John Millaway <john43@users.sourceforge.net>
+
+	* filter.c, gen.c, libyywrap.c, main.c: Patch for full file system
+	failure.
+
+2006-02-13  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi: Documentation.
+
+2006-02-13  John Millaway <john43@users.sourceforge.net>
+
+	* main.c: Fixed double-fclose when input file is empty.
+
+2006-02-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/ca.po, po/da.po, po/de.po, po/es.po, po/fr.po, po/ga.po,
+	po/ko.po, po/nl.po.1, po/pl.po, po/pt_BR.po, po/ro.po, po/ru.po,
+	po/sv.po, po/tr.po, po/vi.po, po/zh_CN.po: newtranslations
+
+2005-12-22  John Millaway <john43@users.sourceforge.net>
+
+	* buf.c, main.c: Improvement request 1069716 log vs. log10
+
+2005-12-22  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Fixed bug 1257093 yy_init_globals in header file
+
+2005-04-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/nl.po: new nl translation
+
+2005-04-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/LINGUAS, po/nl.po, po/vi.po: new nl and vi translations
+
+2004-07-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* filter.c: correct improper stdin assignment
+
+2004-05-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/tr.po: new tr translation
+
+2004-05-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* .cvsignore, .indent.pro: .cvsignore and  .indent.pro got missed in
+	the import to sourceforge; replace them
+
+2004-05-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/fr.po: new fr translation
+
+2004-05-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/LINGUAS: polish is pl, not po
+
+2004-03-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/sv.po: yet another sweedish update
+
+2004-03-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/sv.po: new sv translation
+
+2003-12-11  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, filter.c, main.c: Configure checks for GNU m4.
+	Environment variable M4 overrides built-in m4 path.  Generated m4
+	does a late check for GNU m4.
+
+2003-12-09  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi: added 3 faqs
+
+2003-11-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/ro.po: new ro translation
+
+2003-11-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/fr.po: new french translation
+
+2003-11-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/ca.po: new catalan translation from the translation
+	project
+
+2003-11-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/LINGUAS, po/ga.po, po/pl.po: new polish translation;
+	updated irish translation from translation project
+
+2003-10-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/LINGUAS, po/ga.po: new Irish translation
+
+2003-08-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/LINGUAS, po/ro.po: add romanian translation
+
+2003-07-16  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: flex_*int* type fixes
+
+2003-07-16  Will Estes <wlestes@users.sourceforge.net>
+
+	* tools/cvsauthors: change wlestes email address
+
+2003-07-16  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: undef yytext_ptr has some bad side effects
+
+2003-07-07  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi: Documented m4 incompatibility with lex.
+
+2003-05-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: upgrade to gettext 0.12
+
+2003-05-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl, gen.c: patches from manoj via sourceforge
+
+2003-05-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in, po/.cvsignore, po/Makevars: upgrade gettext to 0.12;
+	this allows running make pdf and make ps to be successful
+
+2003-05-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/.cvsignore: cvs should ignore flex.pdf and flex.ps
+
+2003-04-25  John Millaway <john43@users.sourceforge.net>
+
+	* TODO: Added yylineno bugs to TODO list.
+
+2003-04-03  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.xml: Docbook.
+
+2003-04-03  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.xml: xml now validates.
+
+2003-04-02  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.xml: Began conversion to DocBook.
+
+2003-04-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.31
+
+2003-04-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: remove --enable-maintainer-mode configure option
+
+2003-04-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: remove AM_MAINTAINER_MODE
+
+2003-04-01  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, flexdef.h, main.c, misc.c, scan.l: Renamed some internal
+	variables.
+
+2003-03-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: yylineno is now per-buffer in reentrant scanners
+
+2003-03-31  John Millaway <john43@users.sourceforge.net>
+
+	* TODO: Added TODO item.
+
+2003-03-30  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, gen.c: yylineno is per-buffer in the reentrant scanner.
+	support for yycolumn exists, but is not yet developed.
+
+2003-03-28  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Minor documentation.
+
+2003-03-28  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: added %top directive
+
+2003-03-27  John Millaway <john43@users.sourceforge.net>
+
+	* buf.c, configure.in, doc/flex.texi, flexdef.h, main.c, scan.l,
+	tests/Makefile.am, tests/descriptions, tests/test-top/.cvsignore,
+	tests/test-top/Makefile.am, tests/test-top/main.c,
+	tests/test-top/scanner.l, tests/test-top/test.input: Added %top
+	block syntax.  Added test for %top block.  Documented %top block.
+
+2003-03-27  John Millaway <john43@users.sourceforge.net>
+
+	* TODO, doc/flex.texi: Documented the m4 dependency.
+
+2003-03-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in, flexdef.h: check for sys/wait.h since we use wait(2)
+
+2003-03-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexdef.h: reorder include directives so as to catch system
+	integer types before flex defined values for same
+
+2003-03-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: assign tasks due before major release can happen; remove
+	--enable-maintainer-mode entry
+
+2003-03-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: only rebuild the ChangeLog if we're inside a cvs
+	working directory
+
+2003-03-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in, tools/.cvsignore, tools/Makefile.am: add tools/
+	subdirectory to distribution
+
+2003-03-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: remove maintainer_mode conditional; add filter.c and
+	regex.c to indentfiles; reformat and sort indentfiles so it's easier
+	to add files in the future
+
+2003-03-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/Makefile.am: clean up flex.texi processing leftovers with
+	cleanfiles
+
+2003-03-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-linedir-r/Makefile.am: an awk script wasn't included in
+	the distribution
+
+2003-03-26  John Millaway <john43@users.sourceforge.net>
+
+	* TODO, configure.in, tests/Makefile.am, tests/descriptions,
+	tests/test-include-by-push/.cvsignore,
+	tests/test-include-by-push/Makefile.am,
+	tests/test-include-by-push/scanner.l,
+	tests/test-include-by-push/test-1.input,
+	tests/test-include-by-push/test-2.input,
+	tests/test-include-by-push/test-3.input: Added test for
+	yypush_buffer_state and yypop_buffer_state.
+
+2003-03-26  John Millaway <john43@users.sourceforge.net>
+
+	* TODO: Removed items from TODO list.
+
+2003-03-26  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, tests/Makefile.am, tests/descriptions,
+	tests/test-linedir-r/.cvsignore, tests/test-linedir-r/Makefile.am,
+	tests/test-linedir-r/check-lines.awk, tests/test-linedir-r/main.c,
+	tests/test-linedir-r/scanner.l, tests/test-linedir-r/test.input: 
+	Added test for #line directives.
+
+2003-03-26  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, tests/Makefile.am, tests/test-noansi-nr/.cvsignore,
+	tests/test-noansi-nr/Makefile.am, tests/test-noansi-nr/scanner.l,
+	tests/test-noansi-nr/test.input, tests/test-noansi-r/.cvsignore,
+	tests/test-noansi-r/Makefile.am, tests/test-noansi-r/scanner.l,
+	tests/test-noansi-r/test.input: Added test for noansi (traditional)
+	options.  Reordered the tests so the basic ones are first.
+
+2003-03-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO, doc/Makefile.am: remove maintainer-mode conditional around
+	rebuilding of manpage
+
+2003-03-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* README: mention doc/ for user documentation
+
+2003-03-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: rework distribution items
+
+2003-03-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: mention m4 processing
+
+2003-03-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/README: update instructions for running test suite
+
+2003-03-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* FlexLexer.h, Makefile.am, TODO, buf.c, configure.in,
+	doc/flex.texi, filter.c, flex.skl, flexdef.h, gen.c, main.c,
+	misc.c, options.c, options.h, regex.c, scan.l, sym.c,
+	tests/test-bison-nr/scanner.l, tests/test-bison-yylloc/scanner.l,
+	tests/test-reject/scanner.l, tests/test-table-opts/scanner.l: merge
+	millaway's m4 branch work
+
+2003-03-24  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi, flex.skl, flexdef.h, gen.c, main.c, options.c,
+	options.h, scan.l: Option ansi-definitions.  Option ansi-prototypes.
+	Cleaned up some of header.  Documented bison-locations.
+
+2003-03-24  John Millaway <john43@users.sourceforge.net>
+
+	* scan.l: Escaped m4 macros in scan.l which would cause
+	bootstrapping issues.
+
+2003-03-21  John Millaway <john43@users.sourceforge.net>
+
+	* doc/flex.texi, flex.skl, main.c: Cleaning up the skel.
+
+2003-03-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: we want to move the contents of to.do/Wishlist to top level
+	TODO
+
+2003-03-20  John Millaway <john43@users.sourceforge.net>
+
+	* to.do/Wish-List: Assessment of every item in Wish-List.
+
+2003-03-19  John Millaway <john43@users.sourceforge.net>
+
+	* main.c: Fixed allocation of slightly more memory than needed.
+
+2003-03-19  John Millaway <john43@users.sourceforge.net>
+
+	* TODO, buf.c, configure.in, flex.skl, flexdef.h, main.c, sym.c: 
+	Start conditions now generated in a single place.
+
+2003-03-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: cosmetic changes to TODO list
+
+2003-03-19  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Cleaned up warnings so multiple headers could coincide.
+
+2003-03-19  John Millaway <john43@users.sourceforge.net>
+
+	* TODO, flex.skl, main.c: Moved prefixes to m4.
+
+2003-03-19  John Millaway <john43@users.sourceforge.net>
+
+	* FlexLexer.h, filter.c, flex.skl, flexdef.h, main.c, misc.c,
+	regex.c: Removed Paxson/Berkeley copyright restriction from filter.c
+	and regex.c.  Inline documentation of much of the generated API.
+	Line directives now fixed for header and stdin/stdout.  Blank lines
+	squeezed from generated scanner.
+
+2003-03-18  John Millaway <john43@users.sourceforge.net>
+
+	* filter.c, flexdef.h, main.c, regex.c: Fixed #line directives.
+
+2003-03-17  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am, filter.c, flexdef.h, regex.c: Added regex.c for
+	regex-related code.  Worked on fixing line directives;incomplete.
+
+2003-03-14  John Millaway <john43@users.sourceforge.net>
+
+	* TODO: Added some TODOs.
+
+2003-03-14  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h, main.c, options.c, options.h, scan.l,
+	tests/test-bison-nr/scanner.l, tests/test-bison-yylloc/scanner.l: 
+	Bison bridge was simplified to rely less on bison output.  New
+	option bison-locations.
+
+2003-03-14  John Millaway <john43@users.sourceforge.net>
+
+	* filter.c, flex.skl, flexdef.h, gen.c, main.c, scan.l,
+	tests/test-reject/scanner.l: Filters are now direct children of main
+	process.  Header file now generated through m4.
+
+2003-03-14  John Millaway <john43@users.sourceforge.net>
+
+	* buf.c, filter.c, flexdef.h, main.c, misc.c: Added internal filter
+	ability.  Deleted various unused variables.
+
+2003-03-14  John Millaway <john43@users.sourceforge.net>
+
+	* main.c, tests/test-table-opts/scanner.l: Keeping tests up to date
+	with m4 changes.  Proper wait for all children.
+
+2003-03-14  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, tests/test-table-opts/scanner.l: Moved test-tables to
+	m4.
+
+2003-03-14  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, main.c, options.c: Moved bison bridge code to m4.
+
+2003-03-13  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, gen.c, main.c, scan.l: Moved YY_USE_LINENO to m4.
+
+2003-03-13  John Millaway <john43@users.sourceforge.net>
+
+	* buf.c, flexdef.h, scan.l: Added function buf_m4_undefine.
+
+2003-03-13  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, main.c, scan.l: Replaced YY_ALWAYS_INTERACTIVE with m4.
+	Replaced YY_NEVER_INTERACTIVE with m4.
+
+2003-03-13  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, main.c: Moved YY_TEXT_IS_ARRAY to m4.
+
+2003-03-12  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, gen.c, main.c, tests/test-reject/scanner.l: Renaming
+	macros from YY_* to M4_YY_* where appropriate.
+
+2003-03-12  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, tests/test-reject/scanner.l,
+	tests/test-table-opts/scanner.l: Now using local variable "yyg"
+	instead of lengthly YY_G expansion.
+
+2003-03-12  John Millaway <john43@users.sourceforge.net>
+
+	* buf.c, filter.c, flex.skl, flexdef.h, main.c, misc.c, options.c,
+	options.h, scan.l, tests/test-reject/scanner.l: More m4 macro
+	conversions.  Added debugging option --preproc-level=NUM.
+
+2003-03-11  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am, buf.c, flex.skl, flexdef.h, gen.c, main.c, misc.c,
+	scan.l: Replaced many CPP macros with m4 equivalents.
+
+2003-03-10  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am, filter.c, flex.skl, flexdef.h, main.c, misc.c: Added
+	filter.c Added filter.c rules to Makefile.am Added filter prototypes
+	to flexdef.h Flex now filters output through m4.
+
+2003-03-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* doc/.cvsignore, texinfo.tex: move texinfo.tex to doc/
+
+2003-03-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: update TODO
+
+2003-03-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.29
+
+2003-03-04  John Millaway <john43@users.sourceforge.net>
+
+	* FlexLexer.h, flex.skl: Added growable buffer stack to C++ scanner
+	as well.  yyensure_buffer_stack is now static.
+
+2003-03-02  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, misc.c: Removed awkward %push %pop syntax from skeleton.
+
+2003-03-02  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Renamed YY_CURRENT_BUFFER_FAST to
+	YY_CURRENT_BUFFER_LVALUE to better reflect its purpose.
+
+2003-02-28  John Millaway <john43@users.sourceforge.net>
+
+	* NEWS: made entry on input buffer stacks.
+
+2003-02-28  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, doc/Makefile.am: build on . in top level first; this
+	will simplify calling help2man
+
+2003-02-28  John Millaway <john43@users.sourceforge.net>
+
+	* TODO, doc/flex.texi, flex.skl, gen.c, main.c: Removed
+	yy_current_buffer from the planet.  Input buffer states are now in
+	an internal unbounded stack.  Added new internal function,
+	yyensure_buffer_stack.  Added new API function, yypush_buffer_state.
+	Added new API function, yypop_buffer_state.  Documented the new API
+	calls in the manual.  Macro YY_BUFFER_STATE now refers to top of
+	stack.  This revision breaks the C++ scanner (again.)
+
+2003-02-28  John Millaway <john43@users.sourceforge.net>
+
+	* main.c: Removed some symbols from the undef list. They are needed
+	for multiple headers to coexist.
+
+2003-02-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, NEWS, configure.in, doc/.cvsignore, doc/Makefile.am,
+	doc/flex.texi, flex.texi: move flex.texi and flex.1 to new doc/
+	subdirectory
+
+2003-02-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: namespace cleanups
+
+2003-02-26  John Millaway <john43@users.sourceforge.net>
+
+	* main.c: Added a few macros to the undef list.
+
+2003-02-26  John Millaway <john43@users.sourceforge.net>
+
+	* main.c: Put the undef macros in an array.
+
+2003-02-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.28
+
+2003-02-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* README, TODO, configure.in, flex.texi: update documentation to
+	reflect the sourceforge move
+
+2003-02-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: update according to current thinking
+
+2003-02-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: mcvs reviewed
+
+2003-02-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: sourceforge migration tasks
+
+2003-02-04  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: Flex now warns if always-interactive is specified with fast
+	or full; Fixed trailing slash bug in YY_INPUT macro def
+
+2003-01-31  John Millaway <john43@users.sourceforge.net>
+
+	* scan.l: Flex now warns if always-interactive is specified with
+	fast or full.
+
+2003-01-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: switch to using cvs2cl.pl to generate the ChangeLog
+
+2003-01-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* tools/cvs2cl.pl, tools/cvsauthors: we're going to be switching how
+	we handle our ChangeLog
+
+2003-01-29  John Millaway <john43@users.sourceforge.net>
+
+	* gen.c, misc.c: Fixed trailing slash bug in YY_INPUT macro def.
+
+2003-01-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* README.cvs-snapshot: upgrade texinfo to 4.3d
+
+2003-01-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: the @copying construct works now; thanks to the texinfo
+	maintainers for finding the problem
+
+2003-01-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.27
+
+2003-01-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: flex now works with recent bison versions
+
+2003-01-18  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Check for YYLTYPE_IS_DECLARED. This fixes bison-bridge
+	with latest bison.
+
+2003-01-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/pt_BR.po: new pt_br translation
+
+2003-01-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.26
+
+2003-01-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: Fixed table deserialization bug on big-endian archs. Patch
+	sent from Bryce Nichols <bryce@bnichols.org>
+
+2003-01-12  John Millaway <john43@users.sourceforge.net>
+
+	* tables_shared.h: Fixed table deserialization bug on big-endian
+	archs. Patch sent from Bryce Nichols <bryce@bnichols.org>.
+
+2003-01-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* README.cvs-snapshot: add version numbers for some tools and
+	explain about version.texi and --enable-maintainer-mode
+
+2003-01-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: catch news up
+
+2003-01-09  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-mem-nr/scanner.l, tests/test-mem-r/scanner.l: Changed
+	size_t to yy_size_t in yyalloc() and yyrealloc(). Is this really
+	what we want?
+
+2003-01-09  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Changed type of yyleng from size_t to int. This fixes
+	bug in PostgreSQL compilation.
+
+2003-01-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: catch news up
+
+2003-01-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: more c++ fixes
+
+2003-01-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, configure.in, flex.spec.in: add a spec file
+
+2003-01-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: type cast to pacify c++ compilers; patch from Bruce
+	Lilly <blilly@erols.com>
+
+2003-01-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: new es translation
+
+2003-01-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/es.po: new spanish translation
+
+2002-12-19  John Millaway <john43@users.sourceforge.net>
+
+	* gen.c: Fixed bug where YY_G(0) sometimes occurs (created by my
+	previous commit.)
+
+2002-12-17  John Millaway <john43@users.sourceforge.net>
+
+	* gen.c: Fixed bug submitted by Bojan Smojver <bojan@rexursive.com>
+	where the use of yylineno, reentrant, and yymore together caused a
+	compile-time error.
+
+2002-12-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: update NEWS
+
+2002-12-17  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Documented new behavior with character ranges.
+
+2002-12-16  John Millaway <john43@users.sourceforge.net>
+
+	* parse.y: Fixed bug submitted by  Bruce Lilly <blilly@erols.com>
+	where character ranges would yield unexpected behavior in a caseless
+	scanner.  Also, flex now emits a warning if the range looks like
+	trouble.
+
+2002-12-16  John Millaway <john43@users.sourceforge.net>
+
+	* ccl.c, flexdef.h: Added utility functions to deal with character
+	case.
+
+2002-12-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexint.h: we don't really need int64 anyway
+
+2002-12-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: apparently some lints are happier with fllthrough
+	without a space
+
+2002-12-02  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.25
+
+2002-12-02  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: enclose flex.1 target in MAINTERNER_MODE
+
+2002-12-02  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/pt_BR.po: new pt_br translation
+
+2002-12-01  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Indexed some more faqs.
+
+2002-11-29  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Fixed bug in SECOND yyless definition where argument was
+	not enclosed in parentheses.
+
+2002-11-29  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Fixed bug in yyless definition where argument was not
+	enclosed in parentheses.
+
+2002-11-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: flex uses flex_int*_t types
+
+2002-11-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexint.h: integer types for non-C99 systems flexint.h
+
+2002-11-27  John Millaway <john43@users.sourceforge.net>
+
+	* dfa.c, flexint.h, gen.c, tables.c, tables.h, tables_shared.c,
+	tables_shared.h: Changed int types to flex_intX_t. The build is now
+	broken until typedef's are established.
+
+2002-11-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: MAINTAINERCLEANFILES: new variable: try to make it so
+	that make maintainer-clean  erases everything not under version
+	control
+
+2002-11-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* config.rpath: remove config.rpath
+
+2002-11-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* README-alpha: just list location of betas
+
+2002-11-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexint.h: __STDC_VERSION__ needs an L suffix
+
+2002-11-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/LINGUAS, po/pt_BR.po: new pt_br translation from the
+	translation project
+
+2002-11-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexint.h: include inttypes.h for folks who really are C99
+
+2002-11-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: fix a typo
+
+2002-11-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.24
+
+2002-11-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: try to make sure we have GNU m4
+
+2002-11-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-c++-multiple-scanners/Makefile.am: include
+	tests/test-c++-multipl-scanners/test.input
+
+2002-11-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: more portability fixes
+
+2002-11-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in, flexdef.h: apparently on some BSD systems, we need
+	sys/params.h; reported by millaway
+
+2002-11-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: update NEWS
+
+2002-11-22  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, main.c, tests/test-c++-multiple-scanners/Makefile.am: 
+	Fixed prefix of yyalloc,yyfree,yyrealloc in C++ scanner.  Removed
+	yylex_destroy from C++ scanner.
+
+2002-11-22  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: renamed some faqs.
+
+2002-11-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* AUTHORS: update wording about authorship
+
+2002-11-17  John Millaway <john43@users.sourceforge.net>
+
+	* parse.y: Removed space before line num in error messages to look
+	more like gcc's errors.
+
+2002-11-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/tr.po: new turkish translation from the translation
+	project
+
+2002-10-28  Will Estes <wlestes@users.sourceforge.net>
+
+	* gen.c: applied c++ from lilypond folks for std:: reasons
+
+2002-10-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: proofreading
+
+2002-10-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: proofreading
+
+2002-10-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: use c-style header names in c++ for now; at some point
+	we'll have a separate c++ skeleton and we can go whole-hog pure c++
+
+2002-10-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: c++ rants
+
+2002-10-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: more proofreading
+
+2002-10-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: include intent.pro; indent target is MAINTAINER_MODE
+	conditional
+
+2002-10-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: When we use AC_PATH_PROG, value-if-not-found is the
+	name of the program we wanted to find; this will generate more
+	helpful error messages
+
+2002-10-21  John Millaway <john43@users.sourceforge.net>
+
+	* tables.c: Added a missing function prototype.
+
+2002-10-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.23
+
+2002-10-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: update NEWS on recent changes
+
+2002-10-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexint.h: use sys/types.h and not inttypes.h
+
+2002-10-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: check for limits.h
+
+2002-10-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: update TODO on recent suggestions
+
+2002-10-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: titlepage and contents
+
+2002-10-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: typo
+
+2002-10-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, README.cvs-snapshot: include README.cvs-snapshot in
+	the distribution; in README-cvs-snapshot, mention the need for
+	enable-maintainer-mode
+
+2002-10-21  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: typo.
+
+2002-10-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: report the current version info that flex provides;
+	reformat a list of non-posix features
+
+2002-10-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: report the current version info that flex provides
+
+2002-10-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: FLEX_BETA defined if flex is beta
+
+2002-10-16  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexint.h: if we're doing c++, then we can't use long long
+
+2002-10-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: update TODO on several things
+
+2002-10-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: more proofreading
+
+2002-10-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am, tests/test-array-nr/Makefile.am,
+	tests/test-array-r/Makefile.am, tests/test-basic-nr/Makefile.am,
+	tests/test-basic-r/Makefile.am, tests/test-bison-nr/Makefile.am,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylval/Makefile.am,
+	tests/test-c++-basic/Makefile.am,
+	tests/test-c++-multiple-scanners/Makefile.am,
+	tests/test-c-cpp-nr/Makefile.am, tests/test-c-cpp-r/Makefile.am,
+	tests/test-debug-nr/Makefile.am, tests/test-debug-r/Makefile.am,
+	tests/test-header-nr/Makefile.am, tests/test-header-r/Makefile.am,
+	tests/test-include-by-buffer/Makefile.am,
+	tests/test-include-by-reentrant/Makefile.am,
+	tests/test-lineno-nr/Makefile.am, tests/test-lineno-r/Makefile.am,
+	tests/test-mem-nr/Makefile.am, tests/test-mem-r/Makefile.am,
+	tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-r/Makefile.am,
+	tests/test-posix/Makefile.am,
+	tests/test-posixly-correct/Makefile.am,
+	tests/test-prefix-nr/Makefile.am, tests/test-prefix-r/Makefile.am,
+	tests/test-pthread/Makefile.am, tests/test-reject/Makefile.am,
+	tests/test-string-nr/Makefile.am, tests/test-string-r/Makefile.am,
+	tests/test-table-opts/Makefile.am, tests/test-yyextra/Makefile.am: 
+	remove BISON assignment as per suggestion from Akim Demaille
+
+2002-10-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, configure.in: remove intl from dist
+
+2002-10-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: we use maintainer mode now
+
+2002-10-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: include create-test
+
+2002-10-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/Makefile.am: rename test to check-local as per Akim
+	Demaille; test for failed tests so that make check fails if any
+	tests do
+
+2002-10-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/Makefile.am: use dist_noinst_scripts as per email from Akim
+	Demaille
+
+2002-10-10  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Documentation.
+
+2002-10-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.22; portability fixes and attn to
+	the test suite
+
+2002-10-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexint.h: ok, this seems to work
+
+2002-10-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am, tests/test-bison-nr/Makefile.am,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylval/Makefile.am,
+	tests/test-header-nr/Makefile.am, tests/test-header-r/Makefile.am,
+	tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-r/Makefile.am: use builddir in tests
+	that need it in their include path
+
+2002-10-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am: sometimes we put header files in the
+	builddir and so we should account for that
+
+2002-10-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am: replace the last  instance
+
+2002-10-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: include unistd.h and not cunistd as cunistd only seems
+	to be present on very recent systems
+
+2002-10-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, configure.in, flex.skl, flexdef.h, flexint.h: redo
+	integral types again; add flexint.h; change dependencies caused by
+	adding flexint.h; remove autoconf wrapper around cunistd; restore
+	netinet/in.h includes; remove unneded feature checks in configure.in
+
+2002-10-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in, flex.skl, flexdef.h: current swipe at header magic;
+	int types be damned
+
+2002-10-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: change version constant info to reflect change to flex.skl
+
+2002-10-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: remove README-alpha option; add definitions for
+	FLEX_{MAJOR,MINOR,SUBMINOR}_VERSION
+
+2002-10-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl, flexdef.h: ok, here goes; try to handle integral
+	typedefs in one swell foop
+
+2002-10-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: we check for {u,}int*_t types; maybe this will
+	simplify things
+
+2002-10-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: we create the tests/TEMPLATE/Makefile so that we can
+	build the dist archives
+
+2002-10-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: more test suite cleanups
+
+2002-10-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-c++-multiple-scanners/Makefile.am: we don't use header
+	files...
+
+2002-10-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexdef.h: remove include of malloc.h
+
+2002-10-04  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: more editing; remove examples index; merge examples
+	into concept index
+
+2002-10-04  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: edited one more faq; used C-u C-c C-u C-a to update
+	menus and nodes since the other updating commands are somewhat
+	broken; unfortunately this means that all nodes have all pointers
+	filled in
+
+2002-10-04  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: yesterday's proofreading
+
+2002-10-02  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: proofread some more
+
+2002-10-02  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: proofread edit begins
+
+2002-10-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in, tests/Makefile.am,
+	tests/test-c++-multiple-scanners/.cvsignore,
+	tests/test-c++-multiple-scanners/Makefile.am,
+	tests/test-c++-multiple-scanners/main.cpp,
+	tests/test-c++-multiple-scanners/scanner-1.l,
+	tests/test-c++-multiple-scanners/scanner-2.l,
+	tests/test-c++-multiple-scanners/test.input: test c++ with multiple
+	scanners
+
+2002-09-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-array-nr/Makefile.am, tests/test-array-r/Makefile.am,
+	tests/test-basic-nr/Makefile.am, tests/test-basic-r/Makefile.am,
+	tests/test-bison-nr/Makefile.am,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylval/Makefile.am,
+	tests/test-c++-basic/Makefile.am, tests/test-c-cpp-nr/Makefile.am,
+	tests/test-c-cpp-r/Makefile.am, tests/test-debug-nr/Makefile.am,
+	tests/test-debug-r/Makefile.am, tests/test-header-nr/Makefile.am,
+	tests/test-header-r/Makefile.am,
+	tests/test-include-by-buffer/Makefile.am,
+	tests/test-include-by-reentrant/Makefile.am,
+	tests/test-lineno-nr/Makefile.am, tests/test-lineno-r/Makefile.am,
+	tests/test-mem-nr/Makefile.am, tests/test-mem-r/Makefile.am,
+	tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-r/Makefile.am,
+	tests/test-posix/Makefile.am,
+	tests/test-posixly-correct/Makefile.am,
+	tests/test-prefix-nr/Makefile.am, tests/test-prefix-r/Makefile.am,
+	tests/test-pthread/Makefile.am, tests/test-reject/Makefile.am,
+	tests/test-string-nr/Makefile.am, tests/test-string-r/Makefile.am,
+	tests/test-table-opts/Makefile.am, tests/test-yyextra/Makefile.am: 
+	we used INCLUDES in another place in the Makefile.am files in the
+	test suite
+
+2002-09-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-array-nr/Makefile.am, tests/test-array-r/Makefile.am,
+	tests/test-basic-nr/Makefile.am, tests/test-basic-r/Makefile.am,
+	tests/test-bison-nr/Makefile.am,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylval/Makefile.am,
+	tests/test-c++-basic/Makefile.am, tests/test-c-cpp-nr/Makefile.am,
+	tests/test-c-cpp-r/Makefile.am, tests/test-debug-nr/Makefile.am,
+	tests/test-debug-r/Makefile.am, tests/test-header-nr/Makefile.am,
+	tests/test-header-r/Makefile.am,
+	tests/test-include-by-buffer/Makefile.am,
+	tests/test-include-by-reentrant/Makefile.am,
+	tests/test-lineno-nr/Makefile.am, tests/test-lineno-r/Makefile.am,
+	tests/test-mem-nr/Makefile.am, tests/test-mem-r/Makefile.am,
+	tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-r/Makefile.am,
+	tests/test-posix/Makefile.am,
+	tests/test-posixly-correct/Makefile.am,
+	tests/test-prefix-nr/Makefile.am, tests/test-prefix-r/Makefile.am,
+	tests/test-pthread/Makefile.am, tests/test-reject/Makefile.am,
+	tests/test-string-nr/Makefile.am, tests/test-string-r/Makefile.am,
+	tests/test-table-opts/Makefile.am, tests/test-yyextra/Makefile.am: 
+	oops, I typed that last s/// command to perl way wrong
+
+2002-09-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am, tests/test-array-nr/Makefile.am,
+	tests/test-array-r/Makefile.am, tests/test-basic-nr/Makefile.am,
+	tests/test-basic-r/Makefile.am, tests/test-bison-nr/Makefile.am,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylval/Makefile.am,
+	tests/test-c++-basic/Makefile.am, tests/test-c-cpp-nr/Makefile.am,
+	tests/test-c-cpp-r/Makefile.am, tests/test-debug-nr/Makefile.am,
+	tests/test-debug-r/Makefile.am, tests/test-header-nr/Makefile.am,
+	tests/test-header-r/Makefile.am,
+	tests/test-include-by-buffer/Makefile.am,
+	tests/test-include-by-reentrant/Makefile.am,
+	tests/test-lineno-nr/Makefile.am, tests/test-lineno-r/Makefile.am,
+	tests/test-mem-nr/Makefile.am, tests/test-mem-r/Makefile.am,
+	tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-r/Makefile.am,
+	tests/test-posix/Makefile.am,
+	tests/test-posixly-correct/Makefile.am,
+	tests/test-prefix-nr/Makefile.am, tests/test-prefix-r/Makefile.am,
+	tests/test-pthread/Makefile.am, tests/test-reject/Makefile.am,
+	tests/test-string-nr/Makefile.am, tests/test-string-r/Makefile.am,
+	tests/test-table-opts/Makefile.am, tests/test-yyextra/Makefile.am: 
+	use AM_CPPFLAGS instead of INCLUDES; write -I with no space after it
+	for broken compilers
+
+2002-09-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: INCLUDES is obsolete; use AM_CPPFLAGS instead
+
+2002-09-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: apparently, AM_CONFIG_HEADER is obsolete
+
+2002-09-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: integrate test suite into automake
+
+2002-09-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: since we dont run the template test, we dont need to
+	generate its Makefile either
+
+2002-09-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* autogen.sh: use autoreconf instead of calling individual utilities
+	separately
+
+2002-09-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: check for c++ compiler
+
+2002-09-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: re-organize according to suggested layout in
+	autoconf manual
+
+2002-09-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, NEWS, configure.in: update automake to 1.7 and
+	autoconf to 2.54
+
+2002-09-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: use AM_YFLAGS since YFLAGS is a user variable
+
+2002-09-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: catch NEWS up on things, some of which happened a long time
+	ago; correct punctuation; try to remove some editorializing
+
+2002-09-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, flex.skl, flex.texi: include a single, automatically
+	generated version number in flex scanners
+
+2002-09-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/create-test: complain audibly when argument not supplied;
+	echo on stderr when writing error messages
+
+2002-09-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/Makefile.am, tests/create-test: DIST_SUBDIRS so we don't
+	have to run the TEMPLATE test; so we add new tests to SUBDIRS and
+	DIST_SUBDIRS
+
+2002-09-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am: not all compilers support '-I dir' so
+	we write '-Idir' instead
+
+2002-09-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: reorganize faq entries; proofread the manual
+
+2002-09-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: move c++ experimental warning to top of cxx node
+
+2002-09-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: move stdint.h include to table-serialization section;
+	we'll still need to think about stdint.h more though
+
+2002-09-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: new smarter skeleton/scanner generation
+
+2002-09-20  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, misc.c: bison-bridge skel handled via %if/%endif pairs.
+
+2002-09-19  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, misc.c: reentrant skel handled via %if/%endif pairs.
+
+2002-09-19  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, misc.c: skeleton uses %push/%pop to keep skelout() scope
+	sane.  skel commands are omitted unless --debug enabled.
+
+2002-09-19  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, main.c, misc.c, tables.h: Added %push and %pop
+	operations to skel processing.
+
+2002-09-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: flex 2.5.21
+
+2002-09-17  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-reject/Makefile.am: minor fixup for dist.
+
+2002-09-16  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.20
+
+2002-09-16  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: correct typo
+
+2002-09-16  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: note the new tables functionality
+
+2002-09-16  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-multiple-scanners-r/.cvsignore,
+	tests/test-multiple-scanners-r/Makefile.am: Fixed `clean' target and
+	.cvsignore.
+
+2002-09-16  John Millaway <john43@users.sourceforge.net>
+
+	* TODO, flex.skl, flex.texi, main.c, tables_shared.h,
+	tests/test-multiple-scanners-r/main.c,
+	tests/test-multiple-scanners-r/scanner-1.l,
+	tests/test-multiple-scanners-r/scanner-2.l: Serialization works in
+	headers (%option headers).  Serialization code (Tables API) is
+	complete.
+
+2002-09-16  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-reject/scanner.l: replace yytables_load with
+	yytables_fload as per millaway's other changes
+
+2002-09-15  John Millaway <john43@users.sourceforge.net>
+
+	* TODO, flex.texi: Created user API for tables deserialization.
+	Documented API and --tables-* options in manual.
+
+2002-09-15  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, tests/test-table-opts/scanner.l: Tables deserialization
+	uses yyalloc/yyfree.  Changed yytables_load to yytables_fload.
+
+2002-09-15  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-bison-nr/.cvsignore: minor upkeep.
+
+2002-09-15  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Categorized and indexed scanner options in manual.
+
+2002-09-15  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Initialization of reject vars and %array vars in
+	reentrant scanner.
+
+2002-09-13  John Millaway <john43@users.sourceforge.net>
+
+	* TODO, configure.in, devel/tables.pl, dfa.c, flex.skl, flex.texi,
+	gen.c, tables.c, tables_shared.c, tables_shared.h,
+	tests/Makefile.am, tests/test-reject/.cvsignore,
+	tests/test-reject/Makefile.am, tests/test-reject/scanner.l,
+	tests/test-reject/test.input, tests/test-table-opts/Makefile.am: 
+	Created test for reject.  Handled reject-triggered tables in
+	serialization.
+
+2002-09-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: millaway has been very busy
+
+2002-09-13  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, tests/test-table-opts/Makefile.am,
+	tests/test-table-opts/scanner.l: Added test for multiple tables in
+	one file.
+
+2002-09-13  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-bison-nr/.cvsignore: forgot to add .cvsignore on last
+	commit.
+
+2002-09-13  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-bison-nr/Makefile.am, tests/test-bison-nr/main.c,
+	tests/test-bison-nr/parser.y, tests/test-bison-nr/scanner.l,
+	tests/test-bison-nr/test.input: Added test-bison-bridge.
+
+2002-09-13  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, flex.skl, flex.texi, flexdef.h, gen.c, main.c,
+	misc.c, options.c, options.h, scan.l, tables.h, tests/Makefile.am,
+	tests/descriptions, tests/test-bison-yylloc/scanner.l,
+	tests/test-bison-yylval/scanner.l, tests/test-table-opts/scanner.l: 
+	Bison bridge code now works for all C scanners and pure/non-pure
+	bison parsers.  Added %option bison-bridge (--bison-bridge).
+	Removed %option reentrant-bison/--reentrant-bison/-Rb.  Scanner
+	knows the name of its tables.  Tables serialization is OK on EOF.
+	yylineno is present in all scanners.  Modified nasty performance
+	penalty warning w/ yylineno.  test-table-opts is now run last
+	because it's so fat.  Updated manual.
+
+2002-09-12  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: documentation of tabels api in manual
+
+2002-09-12  John Millaway <john43@users.sourceforge.net>
+
+	* TODO, tables.c: Renamed *_fwrite to *_write to reflect writer
+	abstraction.
+
+2002-09-11  John Millaway <john43@users.sourceforge.net>
+
+	* devel/tables.pl: Added perl script to read/dump serialized tables
+	in devel/
+
+2002-09-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* scan.l: the debian patch used strlen(yytext) and similar
+	constructs--as millaway points out, this is better known as yyleng
+
+2002-09-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/de.po: new de translation from the translation project
+
+2002-09-11  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: yytbl_load now checks tables set by name.  Localized var
+	scaope in yytbl_load.
+
+2002-09-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/Makefile.am: make clean  before make test
+
+2002-09-09  John Millaway <john43@users.sourceforge.net>
+
+	* TODO, flex.skl: Fixed deserialization of --fast tables.
+
+2002-09-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: fix typo; remove the yylineo entry
+
+2002-09-09  John Millaway <john43@users.sourceforge.net>
+
+	* TODO, buf.c, devel/dump-tables.pl, dfa.c, flex.skl, flexdef.h,
+	gen.c, main.c, misc.c, options.c, options.h, scan.l, tables.c,
+	tables.h, tables_shared.h, tests/test-table-opts/.cvsignore,
+	tests/test-table-opts/Makefile.am, tests/test-table-opts/scanner.l: 
+	Table deserialization works for everything except --fast scanners.
+	Scanners can auto-verify serialized table integrity via
+	--tables-verify.  Added tables API items to TODO list.
+	test-table-opts is becoming exhaustive (a good thing).
+
+2002-09-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: flex has better internal diagnostics
+
+2002-09-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in, flexdef.h: test for presence of __func__ and
+	compensate if absent
+
+2002-09-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: include the intl/ subdirectory when searching for
+	include files
+
+2002-09-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/ru.po, po/sv.po: new sv, ru translations from the
+	translation project
+
+2002-09-07  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, misc.c: Changed cryptic skeleton markers to readable
+	form.
+
+2002-09-07  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am, dfa.c, flex.skl, flex.texi, flexdef.h, gen.c,
+	main.c, misc.c, parse.y, tables.c, tables.h, tables_shared.c,
+	tables_shared.h: Members of struct yy_trans_info are now forced to
+	be the same size.  Added shared file tables_shared.c.  Separated
+	tables.h from flexdef.h Bulk of table deserialization code is done.
+
+2002-09-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/ca.po: new ca translation
+
+2002-09-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: new fr translation
+
+2002-09-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/fr.po: new french translation from the translation project
+
+2002-09-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: c99 function defs by default
+
+2002-09-05  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h, tables.c: Added flex_die macro. May need some autoconf
+	massaging.  Added thorough error checking in tables code.
+
+2002-09-05  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, flex.texi: Flex generates C99 defs now.  Documented the
+	above change in manual.
+
+2002-09-05  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-table-opts/.cvsignore,
+	tests/test-table-opts/Makefile.am: Added serialization test to
+	table-opts test.
+
+2002-09-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: oops, i made a typo
+
+2002-09-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.19
+
+2002-09-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* scan.l: use FLEX_EXIT(), not exit()
+
+2002-09-05  John Millaway <john43@users.sourceforge.net>
+
+	* devel/00EXTRACT-ALL-SYMS.sh, devel/README, devel/dump-tables.pl: 
+	Added devel/ directory for junk that we don't want in the
+	distribution, but that we want in CVS.
+
+2002-09-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* scan.l: s/exit(1)/exit(EXIT_FAILURE)
+
+2002-09-05  John Millaway <john43@users.sourceforge.net>
+
+	* dfa.c, gen.c: Tables are now generated with %option
+	tables-file=FILE.
+
+2002-09-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: catch up on a few things
+
+2002-09-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* scan.l: prevent segfault on input lines which are longer than the
+	allocated space (problem report from Manoj Srivastava
+	<srivasta@golden-gryphon.com>)
+
+2002-09-05  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi, main.c, options.c, options.h: Changed option 'header'
+	to 'header-file'. 'header' still works, though.
+
+2002-09-05  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi, flexdef.h, gen.c, main.c, options.c, options.h,
+	scan.l, tables.c: Tons more work on tables.
+
+2002-09-05  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h, gen.c, tables.c, tables_shared.h: Lots of work on
+	tables serialization code.
+
+2002-09-04  Will Estes <wlestes@users.sourceforge.net>
+
+	* README.cvs-snapshot: mention GNU indent
+
+2002-09-04  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: remove the word after from the version line
+
+2002-09-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.18
+
+2002-09-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: catch up on the NEWS
+
+2002-09-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/Makefile.am: target test: quote the results echoing so that
+	the ECHO_C will work on systems where it is used
+
+2002-09-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: when we don't have GNU indent, the test will
+	generate output on stderr, so we send that to /dev/null
+
+2002-09-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: fixed bug whereby bison was reported missing even
+	when it was found
+
+2002-09-02  John Millaway <john43@users.sourceforge.net>
+
+	* tables.c: In-code documentation.
+
+2002-09-02  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h: Forgot to indent before previous commit.
+
+2002-09-02  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h: Added known integer limits if undefined.
+
+2002-08-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: version 2.5.17
+
+2002-08-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: more portability fixes; new version number
+
+2002-08-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexdef.h, main.c, misc.c, scanopt.c: #include fixes; we've
+	factored out all the system include files and put them in flexdef.h
+
+2002-08-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* dfa.c: eat a blank line
+
+2002-08-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: new config.{sub,guess} files; mention that we use indent on
+	flex
+
+2002-08-28  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: warn if no indent found; version 2.5.16
+
+2002-08-28  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: catch up on recent changes; version 2.5.16
+
+2002-08-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* buf.c, ccl.c, dfa.c, ecs.c, flexdef.h, gen.c, libmain.c,
+	libyywrap.c, main.c, misc.c, nfa.c, options.c, options.h,
+	scanopt.c, scanopt.h, sym.c, tables.c, tables_shared.h, tblcmp.c,
+	yylex.c: ran the indent target; commit the results
+
+2002-08-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: touch up the indent targeet; it's ready for
+	production use now
+
+2002-08-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: test for GNU indent; reorder the tests somewhat
+
+2002-08-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: automake is smarter about autoconf's versioning
+	scheme
+
+2002-08-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: catch NEWS up on what we've been doing
+
+2002-08-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* flexdef.h: do some more conditional including for folks without
+	standard systems
+
+2002-08-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-c++-basic/Makefile.am: use CXX to link the test scanner
+	here
+
+2002-08-22  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Documentation.
+
+2002-08-22  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am: Created 'indent' target and added .indent.pro.
+
+2002-08-22  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-array-nr/Makefile.am, tests/test-array-r/Makefile.am,
+	tests/test-basic-nr/Makefile.am, tests/test-basic-r/Makefile.am,
+	tests/test-c-cpp-nr/Makefile.am: Fixed missing 'make clean' files.
+
+2002-08-22  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylval/Makefile.am: fixed missing 'clean' file.
+
+2002-08-22  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, tests/test-c++-basic/Makefile.am,
+	tests/test-c++-basic/scanner.l: Removed core of yylex_destroy from
+	c++ scanner -- hack! Added -lstdc++ to LDFLAGS (should we have to do
+	this??)
+
+2002-08-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* README: official releases are being hosted by Vern
+
+2002-08-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: new beta version; more entries in NEWS from
+	millaway; the top level entry for test-c++-basic
+
+2002-08-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/Makefile.am, tests/test-c++-basic/.cvsignore,
+	tests/test-c++-basic/Makefile.am, tests/test-c++-basic/scanner.l,
+	tests/test-c++-basic/test.input: add test-c++-basic
+
+2002-08-21  John Millaway <john43@users.sourceforge.net>
+
+	* gen.c, nfa.c: More tabels work.
+
+2002-08-21  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h, gen.c, tables.c, tables_shared.h: More work on tables.
+
+2002-08-20  John Millaway <john43@users.sourceforge.net>
+
+	* dfa.c: Cleaned up macros that took no ';'.
+
+2002-08-20  John Millaway <john43@users.sourceforge.net>
+
+	* scanopt.c: Fixed oddball '=-'.
+
+2002-08-20  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, flex.texi, gen.c: Dynamically allocate REJECT state
+	buffer.  Mentioned memory usage in docs.  Made REJECT buffer
+	variables reentrant-safe.
+
+2002-08-20  John Millaway <john43@users.sourceforge.net>
+
+	* tables.c: More work on tables code.
+
+2002-08-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, NEWS, configure.in: we're using m4 so have configure
+	test for it
+
+2002-08-20  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am, tables.c: Added tables.c and rebuilt dependencies.
+
+2002-08-20  John Millaway <john43@users.sourceforge.net>
+
+	* TODO, flex.texi: Dicussed prototypes and header in manual.
+
+2002-08-19  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am, configure.in, flex.skl, flexdef.h, tables_shared.h: 
+	More work on tables serialization.
+
+2002-08-19  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am, mkskel.sh: Skeleton is now passed through m4 (before
+	dist is built).
+
+2002-08-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/LINGUAS, po/zh_CN.po: add zh_cn translation from the
+	translation project
+
+2002-08-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: millaway's done a lot of things which need to be mentioned
+	in NEWS
+
+2002-08-18  John Millaway <john43@users.sourceforge.net>
+
+	* main.c: Removed #undef of start conditions.
+
+2002-08-17  John Millaway <john43@users.sourceforge.net>
+
+	* TODO: todo list
+
+2002-08-17  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h, main.c, misc.c: Start conditions now optional in
+	header.  undef's now optional in header.  Start conditions are NOT
+	prefixed.
+
+2002-08-17  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, flex.texi: Working on tables API.
+
+2002-08-16  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h, main.c, misc.c, options.c, options.h, parse.y, scan.l: 
+	Added --tables option.  Omitted tables code from generated scanner
+	when unused.
+
+2002-08-16  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, flex.texi, misc.c: Prelimary work on tables API.
+
+2002-08-16  John Millaway <john43@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am, tests/test-array-nr/Makefile.am,
+	tests/test-array-r/Makefile.am, tests/test-basic-nr/Makefile.am,
+	tests/test-basic-r/Makefile.am,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylval/Makefile.am,
+	tests/test-c-cpp-nr/Makefile.am, tests/test-c-cpp-r/Makefile.am,
+	tests/test-debug-nr/Makefile.am, tests/test-debug-r/Makefile.am,
+	tests/test-header-nr/Makefile.am, tests/test-header-r/Makefile.am,
+	tests/test-include-by-buffer/Makefile.am,
+	tests/test-include-by-reentrant/Makefile.am,
+	tests/test-lineno-nr/Makefile.am, tests/test-lineno-r/Makefile.am,
+	tests/test-mem-nr/Makefile.am, tests/test-mem-r/Makefile.am,
+	tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-r/Makefile.am,
+	tests/test-posix/Makefile.am,
+	tests/test-posixly-correct/Makefile.am,
+	tests/test-prefix-nr/Makefile.am, tests/test-prefix-r/Makefile.am,
+	tests/test-pthread/Makefile.am, tests/test-string-nr/Makefile.am,
+	tests/test-string-r/Makefile.am, tests/test-table-opts/Makefile.am,
+	tests/test-yyextra/Makefile.am: Tests now respect CFLAGS, CPPFLAGS,
+	etc..
+
+2002-08-16  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-basic-nr/scanner.l, tests/test-basic-r/scanner.l,
+	tests/test-lineno-nr/scanner.l, tests/test-lineno-r/scanner.l: Got
+	rid of flex -s warnings in tests.
+
+2002-08-16  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am: Updated dependencies list.
+
+2002-08-15  John Millaway <john43@users.sourceforge.net>
+
+	* main.c: Fixed seg fault bug in ecs.
+
+2002-08-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-c-cpp-nr/.cvsignore, tests/test-c-cpp-r/.cvsignore: 
+	ignore .cpp files since we generate them instead of .c
+
+2002-08-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: version 2.5.14
+
+2002-08-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: c-as-c++ tests reworked
+
+2002-08-15  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-c-cpp-nr/Makefile.am, tests/test-c-cpp-nr/scanner.l,
+	tests/test-c-cpp-r/Makefile.am, tests/test-c-cpp-r/scanner.l: The
+	c++ tests use .cpp instead of .c extensions just to be on the safe
+	side.
+
+2002-08-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* main.c: conditionally include <locale.h>; include config.h as well
+
+2002-08-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in, flex.skl: only include <cunistd> if we have it
+
+2002-08-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: portability fixes; added missing punctuation; de translation
+	now included
+
+2002-08-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/LINGUAS: we also translate to german
+
+2002-08-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: require automake at least 1.6
+
+2002-08-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.13
+
+2002-08-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: reverted away from the @copying as it breaks the info
+	reader
+
+2002-08-14  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi, flexdef.h, main.c, misc.c: Start condition prefixes
+	attempts to adjust to user preferences.
+
+2002-08-13  John Millaway <john43@users.sourceforge.net>
+
+	* main.c: Include start condition symbols in header.
+
+2002-08-13  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h, main.c: Omit user code and tables from generated header
+	file.
+
+2002-08-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: use @copying construct to display the flex license;
+	move copying and bug reporting to the front of the manual
+
+2002-08-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: printf fix and yylex_init reports errors
+
+2002-08-12  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Updated manual for %option header.
+
+2002-08-12  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, flex.texi, gen.c: Fixed type mismatch in printf.
+	yylex_init now reports errors.
+
+2002-08-10  John Millaway <john43@users.sourceforge.net>
+
+	* dfa.c, main.c: Added alignment flag for future use.
+
+2002-08-10  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-table-opts/.cvsignore,
+	tests/test-table-opts/Makefile.am: Added options to test-table-opts
+
+2002-08-10  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, tests/Makefile.am, tests/descriptions,
+	tests/test-c-cpp-nr/Makefile.am, tests/test-table-opts/.cvsignore,
+	tests/test-table-opts/Makefile.am, tests/test-table-opts/scanner.l,
+	tests/test-table-opts/test.input: Added a test for various DFA table
+	options.
+
+2002-08-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: more faq editing; corrected mistyped nodenames
+
+2002-08-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: fix typo which propogates out to generated scanners
+
+2002-08-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: edited a few more faqs
+
+2002-08-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, faq.texi: remove faq.texi as it's included in
+	flex.texi
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: a few more faq edits; remove faq-89
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: cite, not site
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: and get the faq included
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: fix some grammer/typography in the top node and add a
+	detailed menu
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: we've updated gettext
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/.cvsignore: we need to ignore a few more gettext files
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.12
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: mention gettext; document the non-need for bison/flex in the
+	build process
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, configure.in: include intl in the distribution and in
+	the build process
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: builddir in help2man call needed @-signs around it
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/.cvsignore: we can ignore Makefile.in.in
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* m4/.cvsignore, m4/Makefile.am: oops, too hasty on deleting this
+	directory, sigh
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* autogen.sh: if autopoint is going to run automatically, it's going
+	to need to be able to update existing files
+
+2002-08-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* ABOUT-NLS, autogen.sh, configure.in, m4/.cvsignore,
+	m4/Makefile.am, m4/codeset.m4, m4/gettext.m4, m4/glibc21.m4,
+	m4/iconv.m4, m4/isc-posix.m4, m4/lcmessage.m4, m4/lib-ld.m4,
+	m4/lib-link.m4, m4/lib-prefix.m4, m4/progtest.m4: autopoint now
+	works so let's let it run the gettext show
+
+2002-08-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: we need to index the faq entries
+
+2002-08-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* faq.texi: proofed "Why do flex scanners call fileno if it is not
+	ANSI compatible?"
+
+2002-08-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* faq.texi: proofed "How do I expand \ escape sequences in C-style
+	quoted strings?"
+
+2002-08-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* README: changes to README to align with GNU coding standards
+
+2002-08-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: help2man should look in builddir for the flex binary
+
+2002-08-02  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Fixed yyunput prototype.
+
+2002-08-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: new fr translation from the translation project
+
+2002-08-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/fr.po: new fr.po translation from the translation project
+
+2002-08-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: yylineno performance hit is fixed
+
+2002-07-31  John Millaway <john43@users.sourceforge.net>
+
+	* TODO, flex.texi: Updated docs on yylineno.
+
+2002-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: discuss yylineno performance
+
+2002-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: forgot to say what the date was that we made the release
+
+2002-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: version 2.5.11
+
+2002-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* faq.texi: fixed a menu entry and related problems
+
+2002-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: someday, maybe we can use autopoint
+
+2002-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: we need to include texinfo.tex now
+
+2002-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* texinfo.tex: add texinfo.tex
+
+2002-07-30  Will Estes <wlestes@users.sourceforge.net>
+
+	* faq.texi: fix up some fatal bugs in the texinfo of the faq; begin
+	the clean up; remove trailing and leading white space
+
+2002-07-30  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: faqs need work
+
+2002-07-30  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, TODO: prototypes get airtime these days
+
+2002-07-28  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Added some comments.
+
+2002-07-28  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Fixed bug where yyless did not consider yylineno.
+
+2002-07-28  John Millaway <john43@users.sourceforge.net>
+
+	* scan.l: Fixed bug I created in previous commit.
+
+2002-07-28  John Millaway <john43@users.sourceforge.net>
+
+	* scan.l: Don't wrap ()s around {NAMEDEFS} at the end of a rule.
+
+2002-07-27  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, tests/test-c-cpp-nr/Makefile.am,
+	tests/test-c-cpp-r/Makefile.am: Fixed test-c-cpp to actually use the
+	C++ compiler for the test.  Fixed the bug that this exposed.
+
+2002-07-27  John Millaway <john43@users.sourceforge.net>
+
+	* ccl.c, flex.skl, flexdef.h, gen.c, main.c, nfa.c, parse.y, scan.l: 
+	yylineno check is only performed on rules whose regexs can match a
+	newline.
+
+2002-07-25  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, tests/TEMPLATE/scanner.l,
+	tests/test-array-nr/scanner.l, tests/test-array-r/scanner.l,
+	tests/test-basic-nr/scanner.l, tests/test-basic-r/scanner.l,
+	tests/test-bison-yylloc/parser.y, tests/test-c-cpp-nr/scanner.l,
+	tests/test-c-cpp-r/scanner.l, tests/test-debug-nr/scanner.l,
+	tests/test-debug-r/scanner.l,
+	tests/test-include-by-buffer/scanner.l,
+	tests/test-include-by-reentrant/scanner.l,
+	tests/test-lineno-nr/scanner.l, tests/test-lineno-r/scanner.l,
+	tests/test-mem-nr/scanner.l, tests/test-mem-r/scanner.l,
+	tests/test-posix/scanner.l, tests/test-posixly-correct/scanner.l,
+	tests/test-prefix-nr/scanner.l, tests/test-prefix-r/scanner.l,
+	tests/test-pthread/scanner.l, tests/test-string-nr/scanner.l,
+	tests/test-string-r/scanner.l, tests/test-yyextra/scanner.l: All
+	prototypes were rewritten to depend upon the macro
+	YY_TRADITIONAL_FUNC_DEFS, which is defined by default.  The
+	generated scanners build cleanly under gcc's traditional strictness
+	and under C++ compilers.
+
+2002-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: dist-bzip2 and rename yy_globals and yy_globals_t
+
+2002-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: version 2.5.10
+
+2002-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: add dist-bzip2 to automake_options so we'll start
+	getting tar.bz2 archives
+
+2002-07-23  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, flex.texi, tests/test-bison-yylval/scanner.l,
+	tests/test-mem-r/scanner.l,
+	tests/test-multiple-scanners-r/scanner-1.l,
+	tests/test-multiple-scanners-r/scanner-2.l,
+	tests/test-prefix-r/scanner.l, tests/test-pthread/scanner.l,
+	tests/test-yyextra/scanner.l: s/yy_globals_t/yyguts_t/g
+	s/yy_globals/yyscanner/g
+
+2002-07-23  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am: typo in tags target
+
+2002-07-22  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am: Removed erroneous $(srcdir) from help2man target.
+
+2002-07-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, configure.in: it's version 2.5.9 now
+
+2002-07-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/.cvsignore: updated gettext to 0.11.3
+
+2002-07-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* ABOUT-NLS, config.rpath, m4/gettext.m4, m4/iconv.m4,
+	m4/isc-posix.m4, m4/lcmessage.m4, m4/lib-link.m4: updated gettext to
+	version 0.11.3
+
+2002-07-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* autogen.sh, configure.in: rollback on configure.in and autogen.sh
+	because autpoint is broken
+
+2002-07-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/ru.po: new russian translation from translation project
+
+2002-07-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* autogen.sh: ok, we're going to start using autopoint, but the tree
+	is going to undergo some changes after this
+
+2002-07-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: we're preparing for autopoint
+
+2002-07-17  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Updated manual.
+
+2002-07-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: update the NEWS file for lots of things millaway has done
+
+2002-07-17  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, main.c, misc.c, scan.l, scanopt.c, sym.c,
+	tests/test-mem-nr/scanner.l, tests/test-mem-r/scanner.l: Fixed
+	prototype/definition conflicts with "traditional" C in skeleton at
+	request of gcc developer.  Removed duplicate prototypes in gen.c,
+	sym.c, main.c.  Added missing prototypes where needed.  All
+	functions in skeleton follow ISO C style protos and defs, instead of
+	BOTH ISO and new-style.  Skeleton now compiles cleanly under
+	super-strict gcc flags.  Flex itself almost compiles cleanly under
+	strict flags.
+
+2002-07-15  John Millaway <john43@users.sourceforge.net>
+
+	* faq.texi, flex.texi: Worked on mem mgmt sect of manual.
+
+2002-07-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* scan.l: allow blank lines and continuations in more places
+
+2002-07-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: millaway finished the faqs directory
+
+2002-07-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: removed items as per email from millaway
+
+2002-07-12  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, tests/Makefile.am, tests/descriptions,
+	tests/test-posix/.cvsignore, tests/test-posix/Makefile.am,
+	tests/test-posix/scanner.l, tests/test-posixly-correct/.cvsignore,
+	tests/test-posixly-correct/Makefile.am,
+	tests/test-posixly-correct/scanner.l: Added test for %option
+	posix-compat and repeat operator.  Added test for POSIXLY_CORRECT
+	environment variable and repeat operator.
+
+2002-07-12  John Millaway <john43@users.sourceforge.net>
+
+	* main.c, scan.l: Fixed POSIXLY_CORRECT detection in scanner.
+
+2002-07-11  John Millaway <john43@users.sourceforge.net>
+
+	* faq.texi: More work on faq.
+
+2002-07-11  John Millaway <john43@users.sourceforge.net>
+
+	* faq.texi: Moved all faqs into manual -- but did not evaluate them
+	yet.  Removed the old faq files.
+
+2002-07-10  John Millaway <john43@users.sourceforge.net>
+
+	* main.c: Removed duplicate definition of FLEX_DEBUG. gcc doesn't
+	care, but other compilers might.
+
+2002-07-10  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Wrote some more about memory mgmt in the manual.
+
+2002-07-10  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: flex.texi now works with install-info.
+
+2002-07-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: added items as per email from millaway
+
+2002-07-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: after we release a version, we have to keep the version
+	number in NEWS current
+
+2002-07-10  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, flex.texi, main.c, scan.l, tests/test-mem-nr/scanner.l,
+	tests/test-mem-r/scanner.l: Fixed prefix issue with get/set debug
+	functions.  Fixed prefix issues with memory functions.
+
+2002-07-09  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Memory functions are no longer static.
+
+2002-07-09  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-mem-nr/test.input: Added a missing input file for
+	test-mem-nr/
+
+2002-07-09  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-mem-nr/.cvsignore, tests/test-mem-nr/Makefile.am,
+	tests/test-mem-nr/scanner.l, tests/test-mem-r/.cvsignore,
+	tests/test-mem-r/Makefile.am, tests/test-mem-r/scanner.l,
+	tests/test-mem-r/test.input: Added tests for overriding memory.
+
+2002-07-09  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Added sections in manual for memory management.
+
+2002-07-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: noted more user visible changes
+
+2002-07-09  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, flex.skl, scan.l, tests/Makefile.am: Added
+	yylex_destroy() to non-reentrant scanner.  Added ability to override
+	memory functions.  Added tests for overriding memory functions.
+
+2002-07-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: new POSIXLY_CORRECT and new ru translation
+
+2002-07-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/ru.po: new ru translation from the translation project
+
+2002-07-09  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Made note of set/get debug in docs.
+
+2002-07-09  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, flexdef.h, tests/create-test: Replaced obsolete
+	macros in configure.in.  Modified create-test to handle the above
+	changes in configure.in.  Added support for <stdbool.h>.
+
+2002-07-09  John Millaway <john43@users.sourceforge.net>
+
+	* main.c: Check POSIXLY_CORRECT env variable.
+
+2002-07-09  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Added prototypes for the get/set debug functions.
+
+2002-07-09  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in, flex.skl, gen.c, main.c, scan.l, tests/Makefile.am,
+	tests/test-debug-nr/.cvsignore, tests/test-debug-nr/Makefile.am,
+	tests/test-debug-nr/scanner.l, tests/test-debug-nr/test.input,
+	tests/test-debug-r/.cvsignore, tests/test-debug-r/Makefile.am,
+	tests/test-debug-r/scanner.l, tests/test-debug-r/test.input: Made
+	yy_flex_debug non-global in reentrant scanner.  Created get/set
+	functions for yy_flex_debug.  Defined prefixes for new yy_flex_debug
+	symbols.  Added tests/ for yy_flex_debug.
+
+2002-07-09  John Millaway <john43@users.sourceforge.net>
+
+	* tests/create-test: create-test script now modifies .cvsignore
+
+2002-07-09  John Millaway <john43@users.sourceforge.net>
+
+	* tests/create-test: Improved the error checking.
+
+2002-07-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* main.c: fix bug whereby prefix didn't get passed to everybody;
+	patch by                                        rse@engelschall.com
+
+2002-07-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* faq.texi: ~ is an active character, so we'll just use the word
+	'about'
+
+2002-07-02  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am: Fixed typo.
+
+2002-07-02  John Millaway <john43@users.sourceforge.net>
+
+	* faq.texi: Added a faq.
+
+2002-06-28  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am: Added 'tags' target -- something I should have done
+	long ago.
+
+2002-06-28  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: add two new items regarding coding; remove tests/ copyright
+	notice item as it's done
+
+2002-06-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: note the copyright messages in tests/
+
+2002-06-25  John Millaway <john43@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am, tests/TEMPLATE/parser.y,
+	tests/TEMPLATE/scanner.l, tests/test-array-nr/Makefile.am,
+	tests/test-array-nr/scanner.l, tests/test-array-r/Makefile.am,
+	tests/test-array-r/scanner.l, tests/test-basic-nr/Makefile.am,
+	tests/test-basic-nr/scanner.l, tests/test-basic-r/Makefile.am,
+	tests/test-basic-r/scanner.l, tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylloc/main.c, tests/test-bison-yylloc/parser.y,
+	tests/test-bison-yylloc/scanner.l,
+	tests/test-bison-yylval/Makefile.am,
+	tests/test-bison-yylval/main.c, tests/test-bison-yylval/parser.y,
+	tests/test-bison-yylval/scanner.l, tests/test-c-cpp-nr/Makefile.am,
+	tests/test-c-cpp-nr/scanner.l, tests/test-c-cpp-r/Makefile.am,
+	tests/test-c-cpp-r/scanner.l, tests/test-header-nr/Makefile.am,
+	tests/test-header-nr/main.c, tests/test-header-nr/scanner.l,
+	tests/test-header-r/Makefile.am, tests/test-header-r/main.c,
+	tests/test-header-r/scanner.l,
+	tests/test-include-by-buffer/Makefile.am,
+	tests/test-include-by-buffer/scanner.l,
+	tests/test-include-by-reentrant/Makefile.am,
+	tests/test-include-by-reentrant/scanner.l,
+	tests/test-lineno-nr/Makefile.am, tests/test-lineno-nr/scanner.l,
+	tests/test-lineno-r/Makefile.am, tests/test-lineno-r/scanner.l,
+	tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-nr/main.c,
+	tests/test-multiple-scanners-nr/scanner-1.l,
+	tests/test-multiple-scanners-nr/scanner-2.l,
+	tests/test-multiple-scanners-r/Makefile.am,
+	tests/test-multiple-scanners-r/main.c,
+	tests/test-multiple-scanners-r/scanner-1.l,
+	tests/test-multiple-scanners-r/scanner-2.l,
+	tests/test-prefix-nr/Makefile.am, tests/test-prefix-nr/scanner.l,
+	tests/test-prefix-r/Makefile.am, tests/test-prefix-r/scanner.l,
+	tests/test-pthread/Makefile.am, tests/test-pthread/scanner.l,
+	tests/test-string-nr/Makefile.am, tests/test-string-nr/scanner.l,
+	tests/test-string-r/Makefile.am, tests/test-string-r/scanner.l,
+	tests/test-yyextra/Makefile.am, tests/test-yyextra/scanner.l: 
+	Prepended explicit license to all test-*/ sources.
+
+2002-06-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, po/ca.po, po/de.po, po/fr.po, po/sv.po, po/tr.po: new ca,
+	de, fr, sv, tr translations
+
+2002-06-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: add bootstrapper to the todo list
+
+2002-06-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: new version number
+
+2002-06-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: update TODO list
+
+2002-06-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, TODO, flex.texi, flexdef.h, main.c, options.c, options.h,
+	parse.y, scan.l: address typos in NEWS; add --posix option for ERE
+	parsing the way posix wants it; update the TODO file
+
+2002-05-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* README-alpha: made code quality warning more explicit; gave url
+	for cvs and beta flex
+
+2002-05-23  John Millaway <john43@users.sourceforge.net>
+
+	* gen.c: Fixed bug where omission of user section 3 caused unmatched
+	#ifdef's in generated code.
+
+2002-05-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: configure.in requires at least autoconf 2.50
+
+2002-05-13  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am: Updated my email address.
+
+2002-05-10  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h, misc.c: chomp'd lines when reading external skel file.
+
+2002-05-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/sv.po: new sweedish translation from the translation project
+
+2002-04-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/ca.po: new catalan translation from the translation project
+
+2002-04-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/es.po: new spanish translation from the translation project
+
+2002-04-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: note that the lex matching of abc{1,3} is the posix behavior
+	and so we have a problem
+
+2002-04-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: note that the lex matching of abc{1,3} is the posix
+	behavior
+
+2002-04-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: new version 2.5.7; use autoconf versioning info
+
+2002-04-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: note changes in 2.5.7
+
+2002-04-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* main.c: conditional compile gettext initialization
+
+2002-04-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/de.po: new german translation from the translation project
+
+2002-04-19  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-include-by-reentrant/Makefile.am: Fixed command line
+	for test-include-by-reentrant/Makefile.am
+
+2002-04-19  John Millaway <john43@users.sourceforge.net>
+
+	* tests/Makefile.am, tests/TEMPLATE/Makefile.am,
+	tests/test-array-nr/Makefile.am, tests/test-array-r/Makefile.am,
+	tests/test-basic-nr/Makefile.am, tests/test-basic-r/Makefile.am,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylval/Makefile.am,
+	tests/test-c-cpp-nr/Makefile.am, tests/test-c-cpp-r/Makefile.am,
+	tests/test-header-nr/Makefile.am, tests/test-header-r/Makefile.am,
+	tests/test-include-by-buffer/Makefile.am,
+	tests/test-include-by-reentrant/Makefile.am,
+	tests/test-lineno-nr/Makefile.am, tests/test-lineno-r/Makefile.am,
+	tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-r/Makefile.am,
+	tests/test-prefix-nr/Makefile.am, tests/test-prefix-r/Makefile.am,
+	tests/test-pthread/Makefile.am, tests/test-string-nr/Makefile.am,
+	tests/test-string-r/Makefile.am, tests/test-yyextra/Makefile.am: 
+	Added -I . to compiler search path in tests (so it finds the
+	generated parser.h).
+
+2002-04-19  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h, misc.c, parse.y, sym.c: Applied 'const' to a few more
+	char*, where appropriate.
+
+2002-04-19  John Millaway <john43@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am, tests/test-array-nr/Makefile.am,
+	tests/test-array-r/Makefile.am, tests/test-basic-nr/Makefile.am,
+	tests/test-basic-r/Makefile.am,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylval/Makefile.am,
+	tests/test-c-cpp-nr/Makefile.am, tests/test-c-cpp-r/Makefile.am,
+	tests/test-header-nr/Makefile.am, tests/test-header-r/Makefile.am,
+	tests/test-include-by-buffer/Makefile.am,
+	tests/test-include-by-reentrant/Makefile.am,
+	tests/test-lineno-nr/Makefile.am, tests/test-lineno-r/Makefile.am,
+	tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-r/Makefile.am,
+	tests/test-prefix-nr/Makefile.am, tests/test-prefix-r/Makefile.am,
+	tests/test-pthread/Makefile.am, tests/test-string-nr/Makefile.am,
+	tests/test-string-r/Makefile.am, tests/test-yyextra/Makefile.am: 
+	Added top_builddir to -I path.  Changed $(srcdir)/$(testname) to
+	./$(testname) in 'make test' rule.
+
+2002-04-19  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h, gen.c, misc.c: Changed 'char[]' to 'const char*'
+	wherever in conflicted with gettext.
+
+2002-04-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/fr.po, po/sv.po: new files from translation after 2.5.6 beta
+	release
+
+2002-04-18  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-lineno-r/Makefile.am: Fixed minor typo/cut and paste
+	error.
+
+2002-04-18  John Millaway <john43@users.sourceforge.net>
+
+	* configure.in: Added yylineno test.
+
+2002-04-18  John Millaway <john43@users.sourceforge.net>
+
+	* tests/Makefile.am: Added yylineno tests.
+
+2002-04-18  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-lineno-nr/.cvsignore,
+	tests/test-lineno-nr/Makefile.am, tests/test-lineno-nr/scanner.l,
+	tests/test-lineno-nr/test.input, tests/test-lineno-r/.cvsignore,
+	tests/test-lineno-r/Makefile.am, tests/test-lineno-r/scanner.l,
+	tests/test-lineno-r/test.input: Created yylineno tests.
+
+2002-04-15  John Millaway <john43@users.sourceforge.net>
+
+	* scanopt.c: Applied gettext macros to error messages from scanopt.
+
+2002-04-15  John Millaway <john43@users.sourceforge.net>
+
+	* buf.c, faq.texi, options.c, options.h, scanopt.c, scanopt.h: 
+	Changed copyright from Millaway to flex? U.S. Gov't? Regents of U.
+	Cali.?  Paxson?
+
+2002-04-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-bison-yylloc/Makefile.am,
+	tests/test-header-nr/Makefile.am, tests/test-header-r/Makefile.am: 
+	we missed a few main.c files in the distribution
+
+2002-04-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: a lot more work has happened to flex; note this by removing
+	a number of TODO entries
+
+2002-04-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: make sure all gettext modules use gettext translation
+	facilities
+
+2002-04-14  John Millaway <john43@users.sourceforge.net>
+
+	* faq.texi: Converted faqs 34-41 to texinfo.
+
+2002-04-14  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am, faq.texi, flex.texi: Added faq.texi to archive.
+	Added faq.texi to flex_TEXINFOS macro in Makefile.am.  flex.texi now
+	includes faq.texi.
+
+2002-04-13  John Millaway <john43@users.sourceforge.net>
+
+	* flexdef.h: defined FLEX_EXIT macro to call longjmp on errors.
+
+2002-04-13  John Millaway <john43@users.sourceforge.net>
+
+	* main.c, misc.c: Replaced exit(2) calls with longjmps (in the form
+	of FLEX_EXIT macro).  Moved main() to flex_main() to allow flex to
+	be called from a library.
+
+2002-04-13  John Millaway <john43@users.sourceforge.net>
+
+	* scanopt.c: Fixed  minor typo in error message
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-header-nr/Makefile.am,
+	tests/test-header-r/Makefile.am,
+	tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-r/Makefile.am,
+	tests/test-pthread/Makefile.am, tests/test-string-nr/Makefile.am,
+	tests/test-string-r/Makefile.am, tests/test-yyextra/Makefile.am: 
+	removed eroneous files listed in EXTRA_DIST
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-yyextra/.cvsignore: ignore Makefile.in
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-string-r/.cvsignore: it's Makefile.in, not makefile.in
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-yyextra/Makefile.am, tests/test-yyextra/Makefile.in: 
+	put test-yyextra under automake
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-string-r/Makefile.am, tests/test-string-r/Makefile.in: 
+	put test-string-r under automake
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-string-nr/.cvsignore, tests/test-string-r/.cvsignore: 
+	we can ignore Makefile.in
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-string-nr/Makefile.am,
+	tests/test-string-nr/Makefile.in: put test-string-nr under automake
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-pthread/.cvsignore: ignore Makefile.in
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-pthread/Makefile.am, tests/test-pthread/Makefile.in: 
+	put test-pthread under automake
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-prefix-r/Makefile.am, tests/test-prefix-r/Makefile.in: 
+	put test-prefix-r under automake
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-prefix-nr/.cvsignore, tests/test-prefix-r/.cvsignore: 
+	we can ignore Makefile.in
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-prefix-nr/Makefile.am,
+	tests/test-prefix-nr/Makefile.in: put test-prefix-nr under automake
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-multiple-scanners-r/Makefile.am,
+	tests/test-multiple-scanners-r/Makefile.in: put
+	test-multiple-scanners-r under automake
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-multiple-scanners-nr/.cvsignore,
+	tests/test-multiple-scanners-r/.cvsignore: we can ignore Makefile.in
+	now
+
+2002-04-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-multiple-scanners-nr/Makefile.am,
+	tests/test-multiple-scanners-nr/Makefile.in: put
+	test-multiple-scanners-nr under automake
+
+2002-04-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-c-cpp-nr/Makefile.am, tests/test-c-cpp-r/Makefile.am: 
+	we didn't need parser.y
+
+2002-04-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: work done on the test suite; remove relevant entries from
+	TODO
+
+2002-04-10  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-include-by-reentrant/.cvsignore,
+	tests/test-include-by-reentrant/Makefile.am,
+	tests/test-include-by-reentrant/Makefile.in: put
+	test-include-by-reentrant under automake
+
+2002-04-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-include-by-buffer/.cvsignore: we have a Makefile.in
+	which we need to ignore
+
+2002-04-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-include-by-buffer/Makefile.am,
+	tests/test-include-by-buffer/Makefile.in: test-include-by-buffer now
+	under automake control
+
+2002-04-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am: and we want LFLAGS in the rule to make
+	scanner.c as well
+
+2002-04-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-header-r/.cvsignore, tests/test-header-r/Makefile.am,
+	tests/test-header-r/Makefile.in: put test-header-r under automake
+
+2002-04-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-header-nr/.cvsignore: we now generate a Makefile.in
+	from automake; cvs should ignore it
+
+2002-04-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-header-nr/Makefile.am: add dependencies for main.o and
+	scaner.h
+
+2002-04-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am: We may want to have LFLAGS readily
+	available
+
+2002-04-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-header-nr/Makefile.am,
+	tests/test-header-nr/Makefile.in: put test-header-nr under automake
+
+2002-04-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am: oops, we need to clean objects too
+
+2002-04-09  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/Makefile.am, tests/test-array-nr/Makefile.am,
+	tests/test-array-r/Makefile.am, tests/test-basic-nr/Makefile.am,
+	tests/test-basic-r/Makefile.am,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylval/Makefile.am,
+	tests/test-c-cpp-nr/Makefile.am, tests/test-c-cpp-r/Makefile.am: now
+	that config.h lives in the top-level directory, we need to tell the
+	testsuite
+
+2002-04-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-array-nr/.cvsignore, tests/test-array-r/.cvsignore,
+	tests/test-basic-nr/.cvsignore, tests/test-basic-r/.cvsignore,
+	tests/test-bison-yylval/.cvsignore, tests/test-c-cpp-nr/.cvsignore,
+	tests/test-c-cpp-r/.cvsignore: we can ignore some Makefile.in
+
+2002-04-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in, tests/TEMPLATE/Makefile.am: only one config file
+	header apparently; this will have consequences in the test suite
+
+2002-04-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-bison-yylval/Makefile.am,
+	tests/test-bison-yylval/Makefile.in: adding automake support
+
+2002-04-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-bison-yylloc/.cvsignore,
+	tests/test-bison-yylloc/Makefile.am: tuned Makefile.am to build
+	correctly; ignore Makefile.in now
+
+2002-04-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/configure.in: test suite changes
+
+2002-04-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* autogen.sh, configure.in, tests/.cvsignore, tests/Makefile.am,
+	tests/Makefile.in, tests/README, tests/TEMPLATE/.cvsignore,
+	tests/TEMPLATE/Makefile.am, tests/TEMPLATE/Makefile.in,
+	tests/configure.in, tests/create-test, tests/create-test.pl,
+	tests/test-array-nr/Makefile.am, tests/test-array-nr/Makefile.in,
+	tests/test-array-r/Makefile.am, tests/test-array-r/Makefile.in,
+	tests/test-basic-nr/Makefile.am, tests/test-basic-nr/Makefile.in,
+	tests/test-basic-r/Makefile.am, tests/test-basic-r/Makefile.in,
+	tests/test-bison-yylloc/Makefile.am,
+	tests/test-bison-yylloc/Makefile.in,
+	tests/test-c-cpp-nr/Makefile.am, tests/test-c-cpp-nr/Makefile.in,
+	tests/test-c-cpp-r/Makefile.am, tests/test-c-cpp-r/Makefile.in: test
+	suite changes
+
+2002-04-05  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Corrected error in manual regarding return type for
+	yy_scan_{string,buffer,bytes}.
+
+2002-04-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/de.po: new german translations from the translation project
+
+2002-04-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/es.po: new spanish translations
+
+2002-04-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: DIST_SUBDIRS: new variable. we can build flex with
+	SUBDIRS and then build the distribution using DIST_SUBDIRS
+
+2002-04-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* main.c: fix typo in comment
+
+2002-03-31  John Millaway <john43@users.sourceforge.net>
+
+	* main.c: Documented the header file kludge, (in anticipation of
+	buffering Section 1.)
+
+2002-03-31  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Created appendix "Makefiles and Flex" in the manual.
+
+2002-03-30  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: updating manual.
+
+2002-03-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/POTFILES.in: we want parse.y, not parse.c
+
+2002-03-29  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Indexing the manual (75% done).
+
+2002-03-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: unlisted intermediate flex/yacc-created files
+
+2002-03-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: millaway has done more work
+
+2002-03-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, configure.in: ok, one last touch up; users most
+	likely wont have help2man so we need to insure that's ok
+
+2002-03-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: fine tune flex.1 some more
+
+2002-03-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, configure.in: generalize the manpage a bit and tell
+	autofoo about help2man
+
+2002-03-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/da.po: new danish from translation project robot
+
+2002-03-28  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Indexing the manual -- it's only half done.
+
+2002-03-28  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: flex manual now uses automake's versioning info.
+
+2002-03-28  John Millaway <john43@users.sourceforge.net>
+
+	* README.cvs-snapshot: Mentioned requirements for gettext and
+	help2man.
+
+2002-03-28  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am, main.c: Output of `flex --version` now matches GNU
+	coding standards.  Makefile.am now uses `help2man` to generate
+	flex.1
+
+2002-03-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: millaway has done a lot on the TODO list; remove those items
+	that he has take care of
+
+2002-03-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* README.cvs-snapshot: edited millaway's initial draft
+
+2002-03-27  John Millaway <john43@users.sourceforge.net>
+
+	* README.cvs-snapshot: Created file.
+
+2002-03-27  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Fixed case of node names in flex.texi.
+
+2002-03-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: lex- and yacc- generated files
+
+2002-03-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/fr.po: new french
+
+2002-03-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: ending periods in news items removed; mention nounistd
+	options
+
+2002-03-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/sv.po: updated sweedish translations
+
+2002-03-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/de.po: german translation
+
+2002-03-18  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl, flex.texi, main.c, options.c, options.h, scan.l: Removed
+	CFront 1.2 -specific code from skeleton, because CFront now defines
+	__cplusplus properly.  Removed TurboC-specific code from skeleton.
+	Skeleton now includes proper C++ standard headers.  Relocated
+	"unistd.h" code after user section 1 to allow user to overrid it.
+	New option "nounistd" to suppress unistd.h from being included.
+
+2002-03-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/tr.po: new turkish translation
+
+2002-03-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: mention included translations
+
+2002-03-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: we've done the gettext thing, but sometime we should get
+	0.11.1
+
+2002-03-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/ca.po: new catalan translation
+
+2002-03-14  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Added section on format of comments.
+
+2002-03-14  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Split format chapter into sections.
+
+2002-03-14  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Removed explicit pointers in node definitions.
+
+2002-03-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: unistd.h can be problematic
+
+2002-03-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/README: editing changes to README
+
+2002-03-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/POTFILES.in: scan.l, not scan.c because gettext gets confused
+
+2002-03-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* scan.l: gettext cruft
+
+2002-03-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/descriptions: separate out test descriptions
+
+2002-03-13  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/LINGUAS: french and korean dont crash now
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/fr.po, po/ko.po: remove duplicate messages as per advice from
+	Jordi Mallach <jordi@debian.org>
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* gettext.h: yes, more gettext cruft
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* ABOUT-NLS, config.rpath, m4/codeset.m4, m4/gettext.m4,
+	m4/glibc21.m4, m4/iconv.m4, m4/isc-posix.m4, m4/lcmessage.m4,
+	m4/lib-ld.m4, m4/lib-link.m4, m4/lib-prefix.m4, m4/progtest.m4: this
+	is gettext cruft
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: gettext and autofoo are now involved
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, autogen.sh, configure.in, flexdef.h, main.c: mostly,
+	changes for gettext
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/ca.po, po/da.po, po/es.po, po/ru.po, po/sv.po, po/tr.po: these
+	sure change a lot
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: note about cvs documentation
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/LINGUAS: we now have turkish
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/tr.po: updated translations, i think
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/ca.po, po/da.po, po/es.po, po/fr.po, po/ko.po, po/ru.po,
+	po/sv.po, po/tr.po: ok, maybe we do keep these things?
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* README-alpha: README-alpha for those bad-hair days
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* m4/.cvsignore, m4/Makefile.am: ok,now we kinda have a m4/ subdir
+	for gettext
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/.cvsignore, po/LINGUAS, po/Makevars, po/POTFILES.in, po/da.po,
+	po/es.po, po/fr.po, po/ko.po, po/ru.po, po/sv.po: now, we have a po/
+	subdirectory for gettext. i hope you're happy
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/ca.po: removing po files, maybe
+
+2002-03-12  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/.cvsignore: ignore autom4te.cache
+
+2002-03-11  Will Estes <wlestes@users.sourceforge.net>
+
+	* po/ca.po, po/da.po, po/es.po, po/fr.po, po/ko.po, po/ru.po,
+	po/sv.po: po files from debian
+
+2002-03-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: add several notes about tasks which need doing; create a new
+	top-level entry for generic coding concerns (this is distinct from
+	specific API or other such issues)
+
+2002-03-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* README: eliminate to.do and faqs from the README file
+
+2002-03-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: more notes on tests/
+
+2002-03-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: remove subdirectories from EXTRA_DIST; add a SUBDIRS
+	macro to handle examples/; clean up the dist-hook target
+
+2002-03-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: we want to generate Makefiles in some more
+	subdirectories; automake will like this
+
+2002-03-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: notes on subdirectories
+
+2002-03-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* examples/.cvsignore, examples/Makefile.am: now examples/ fits into
+	automake
+
+2002-03-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* examples/fastwc/.cvsignore, examples/fastwc/Makefile.am: 
+	examples/fastwc now  fits into automake
+
+2002-03-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* examples/manual/.cvsignore, examples/manual/Makefile.am,
+	examples/manual/Makefile.examples, examples/manual/README: 
+	examples/manual directory now fits into automake
+
+2002-03-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* examples/manual/Makefile: renamed Makefile to Makefile.examples
+	for automake's sake
+
+2002-03-04  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: add parse.c and scan.c to built_sources
+
+2002-02-24  John Millaway <john43@users.sourceforge.net>
+
+	* Makefile.am: Removed CVS-specific code from 'dist-hook' target so
+	anybody with a copy of the tree can build a dist.
+
+2002-02-22  John Millaway <john43@users.sourceforge.net>
+
+	* tests/Makefile.in: Converted test script to portable /bin/sh.
+
+2002-02-22  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-bison-yylloc/Makefile.in: Added some spaces in shell
+	scripts for portability.
+
+2002-02-22  John Millaway <john43@users.sourceforge.net>
+
+	* tests/create-test.pl: Fixed #! line for portability.
+
+2002-02-22  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-bison-yylloc/Makefile.in: Fixed return status code on
+	bison-lloc test.
+
+2002-02-21  John Millaway <john43@users.sourceforge.net>
+
+	* tests/create-test.pl: Added script to auto-create tests. Probably
+	overkill.
+
+2002-02-21  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Fixed C++ #ifdef problem.  Removed mistyped __CPLUSPLUS
+	macro.  Removed THROW_NIL. Not sure where it came from in the first
+	place.
+
+2002-02-21  John Millaway <john43@users.sourceforge.net>
+
+	* tests/README, tests/TEMPLATE/Makefile.in, tests/configure.in,
+	tests/test-c-cpp-nr/.cvsignore, tests/test-c-cpp-nr/Makefile.in,
+	tests/test-c-cpp-nr/scanner.l, tests/test-c-cpp-nr/test.input,
+	tests/test-c-cpp-r/.cvsignore, tests/test-c-cpp-r/Makefile.in,
+	tests/test-c-cpp-r/scanner.l, tests/test-c-cpp-r/test.input: Added
+	test-c-cpp-nr and test-c-cpp-r.
+
+2002-02-16  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Added missing #endif.
+
+2002-02-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/.cvsignore, tests/test-array-nr/.cvsignore,
+	tests/test-array-r/.cvsignore, tests/test-basic-nr/.cvsignore,
+	tests/test-basic-r/.cvsignore, tests/test-bison-yylloc/.cvsignore,
+	tests/test-bison-yylval/.cvsignore,
+	tests/test-header-nr/.cvsignore, tests/test-header-r/.cvsignore,
+	tests/test-include-by-buffer/.cvsignore,
+	tests/test-include-by-reentrant/.cvsignore,
+	tests/test-multiple-scanners-nr/.cvsignore,
+	tests/test-multiple-scanners-r/.cvsignore,
+	tests/test-prefix-nr/.cvsignore, tests/test-prefix-r/.cvsignore,
+	tests/test-pthread/.cvsignore, tests/test-string-nr/.cvsignore,
+	tests/test-string-r/.cvsignore, tests/test-yyextra/.cvsignore: add
+	OUTPUT to .cvsignore files in test directories; it's also in the
+	template directory
+
+2002-02-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* gen.c: fix interrupted reads and freads; from the debian package
+	maintainer
+
+2002-02-06  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi, flexdef.h, main.c, nfa.c: support large flex tables;
+	from debian package maintainer
+
+2002-01-29  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/configure.in: add more output files to account for new tests
+
+2002-01-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-array-nr/.cvsignore, tests/test-array-nr/Makefile.in,
+	tests/test-array-nr/scanner.l, tests/test-array-nr/test.input: add
+	this test
+
+2002-01-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-array-r/.cvsignore, tests/test-array-r/Makefile.in,
+	tests/test-array-r/scanner.l, tests/test-array-r/test.input: add
+	this test suite
+
+2001-11-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl, main.c: millaway: Fixed yytext_ptr when using %array in
+	reentrant scanner
+
+2001-11-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* buf.c: oops, forgot this one line
+
+2001-11-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-header-r/.cvsignore, tests/test-header-r/Makefile.in,
+	tests/test-header-r/main.c, tests/test-header-r/scanner.l,
+	tests/test-header-r/test.input: and more fallout
+
+2001-11-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO, flex.skl, flex.texi, flexdef.h, main.c, misc.c,
+	tests/README, tests/TEMPLATE/Makefile.in, tests/configure.in,
+	tests/test-basic-r/scanner.l, tests/test-bison-yylloc/.cvsignore,
+	tests/test-bison-yylloc/Makefile.in,
+	tests/test-bison-yylloc/parser.y,
+	tests/test-bison-yylloc/scanner.l,
+	tests/test-bison-yylval/.cvsignore,
+	tests/test-bison-yylval/Makefile.in,
+	tests/test-bison-yylval/parser.y,
+	tests/test-bison-yylval/scanner.l,
+	tests/test-include-by-reentrant/scanner.l,
+	tests/test-prefix-r/scanner.l, tests/test-pthread/scanner.l,
+	tests/test-string-r/scanner.l, tests/test-yyextra/scanner.l: more
+	from the same batch
+
+2001-11-14  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-bison-yylloc/main.c, tests/test-bison-yylval/main.c,
+	tests/test-header-nr/.cvsignore, tests/test-header-nr/Makefile.in,
+	tests/test-header-nr/main.c, tests/test-header-nr/scanner.l,
+	tests/test-header-nr/test.input,
+	tests/test-multiple-scanners-nr/.cvsignore,
+	tests/test-multiple-scanners-nr/Makefile.in,
+	tests/test-multiple-scanners-nr/main.c,
+	tests/test-multiple-scanners-nr/scanner-1.l,
+	tests/test-multiple-scanners-nr/scanner-2.l,
+	tests/test-multiple-scanners-r/.cvsignore,
+	tests/test-multiple-scanners-r/Makefile.in,
+	tests/test-multiple-scanners-r/main.c,
+	tests/test-multiple-scanners-r/scanner-1.l,
+	tests/test-multiple-scanners-r/scanner-2.l: a big batch from
+	millaway
+
+2001-10-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: now NEWS has forgotten about the _r variables
+
+2001-10-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl, flex.texi, gen.c, main.c,
+	tests/test-bison-yylloc/scanner.l,
+	tests/test-bison-yylval/scanner.l,
+	tests/test-include-by-reentrant/scanner.l,
+	tests/test-prefix-nr/scanner.l, tests/test-pthread/scanner.l,
+	tests/test-string-r/scanner.l, tests/test-yyextra/scanner.l: 
+	millaway simplified the reentrant api; here's the result
+
+2001-10-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* main.c, options.c, options.h: more from millaway
+
+2001-10-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* main.c, options.c, options.h: the last checkin was broken;
+	millaway fixed it
+
+2001-10-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl, flex.texi, gen.c, main.c, misc.c, options.h, scan.l,
+	scanopt.c, tests/README, tests/configure.in: phew, millaway's latest
+	batch
+
+2001-10-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: flex.skl should come up in C mode
+
+2001-10-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: apparently, isatty and c++ need help getting along (from
+	octave)
+
+2001-10-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: document new options and new option handling
+
+2001-10-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: tell emacs that TODO is a text/outline mode file
+
+2001-10-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: we have new long options; we need to document that
+
+2001-10-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: tell emacs that NEWS is text/outline mode
+
+2001-10-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: oops, lost a line somewhere in the merge process on
+	millaway's work
+
+2001-10-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am, buf.c, flex.skl, flex.texi, flexdef.h, main.c,
+	misc.c, options.c, options.h, parse.y, scan.l, scanopt.c, scanopt.h: 
+	merge latest batch of millaway's changes
+
+2001-09-22  Will Estes <wlestes@users.sourceforge.net>
+
+	* main.c: Fixed typo in options display
+
+2001-09-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* main.c: reentrant and non-reentrant scanners share the same yywrap
+	MACRO. millaway
+
+2001-09-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: clarify item on comments in lexical files
+
+2001-09-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS, scan.l: now flex recognizes \r as an eol character
+
+2001-09-20  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: specify cvsroot so automake distcheck works
+
+2001-09-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: tex has lost its mind; we remove parentheses to
+	compensate
+
+2001-09-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: now that c++ is better supported, let's mention it as a news
+	item
+
+2001-09-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* examples/fastwc/wc1.l, examples/fastwc/wc2.l,
+	examples/fastwc/wc3.l, examples/fastwc/wc4.l,
+	examples/fastwc/wc5.l, flex.skl, main.c: commit the backwash from
+	the branch merges
+
+2001-09-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* FlexLexer.h, examples/testxxLexer.l, flex.skl: made preliminary
+	c++ fixes; the intent is to make it work with recent c++ compilers
+
+2001-08-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* main.c: remove argv_fixup; fix typo in error message; changes from
+	millaway's branch
+
+2001-08-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: mention no more c++ comments in c scanners
+
+2001-08-21  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Changed // comments to /* */ comments in skeleton.
+
+2001-08-19  John Millaway <john43@users.sourceforge.net>
+
+	* flex.texi: Changed @var to @code everywhere.
+
+2001-08-16  Will Estes <wlestes@users.sourceforge.net>
+
+	* to.do/flex.rmail: more mail
+
+2001-08-16  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: the manual now has its own section; we're not adding
+	comments either
+
+2001-08-04  John Millaway <john43@users.sourceforge.net>
+
+	* tests/Makefile.in, tests/README, tests/TEMPLATE/Makefile.in,
+	tests/test-basic-nr/Makefile.in, tests/test-basic-r/Makefile.in,
+	tests/test-bison-yylloc/Makefile.in,
+	tests/test-bison-yylval/Makefile.in,
+	tests/test-include-by-buffer/Makefile.in,
+	tests/test-include-by-reentrant/Makefile.in,
+	tests/test-prefix-nr/Makefile.in, tests/test-prefix-r/Makefile.in,
+	tests/test-pthread/Makefile.in, tests/test-string-nr/Makefile.in,
+	tests/test-string-r/Makefile.in, tests/test-yyextra/Makefile.in: 
+	Cleaned up the output of the tests.
+
+2001-08-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: note jason's thoughts on having a manpage
+
+2001-08-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: note millaway's assignment and tests to be under flex
+	license
+
+2001-08-01  John Millaway <john43@users.sourceforge.net>
+
+	* tests/test-bison-yylval/scanner.l: Fixed semantics of test (the
+	success or failure of this test should be unaffected by this
+	change.)
+
+2001-08-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* autogen.sh: fake automake into believing that ChangeLog already
+	exists
+
+2001-08-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: millaway needs to be covered in the ChangeLog
+
+2001-08-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* version.h: automake is supplying version info now so we just pick
+	it up
+
+2001-08-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: forgot braces on @copyright
+
+2001-08-01  John Millaway <john43@users.sourceforge.net>
+
+	* flex.skl: Added missing argument to yy_flex_free.
+
+2001-08-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* AUTHORS: john millaway wrote the reentrant C support
+
+2001-08-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: add license node to the manual
+
+2001-08-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: c++ ideas
+
+2001-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* parse.y: error messages will now show up the way that emacs likes
+	them
+
+2001-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: oops, left in an extra backslash
+
+2001-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: flex.texi is here; clarify tests/ rewrite issue
+
+2001-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: hey, we have texinfo, not man
+
+2001-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.1: no more manpage
+
+2001-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: remove flex.1 and rewrite the dist-hook so that we
+	pick up a couple more directories
+
+2001-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: the namual now compiles; hurray
+
+2001-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: first attempt at including the tests/ directory via
+	automake, dist-hook target added
+
+2001-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/.cvsignore: ignore config.cache in tests/ directory
+
+2001-07-31  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: automake groks the ChangeLog now so we don't have to
+	remind the maintainer to remake it
+
+2001-07-30  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: more corrections to the manual; the end is in site
+
+2001-07-30  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: auto-generated backup?
+
+2001-07-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: today's tinkering on the manual
+
+2001-07-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: if we want flex.1 we have to say so in EXTRA_DIST
+
+2001-07-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: note future issues with flex.texi
+
+2001-07-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: include flex.1 as it's the only working documentation
+	for now
+
+2001-07-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: rearrange to work with automake on building the
+	ChangeLog
+
+2001-07-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* scan.l: automake is unhappy if we specify the outfile
+
+2001-07-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: more conversions/corrections
+
+2001-07-26  Will Estes <wlestes@users.sourceforge.net>
+
+	* README: we removed misc/ so we don't mention it any more
+
+2001-07-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: begin the manual conversion to texinfo; yes, it's
+	broken right now
+
+2001-07-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* AUTHORS, THANKS: copy in manual author and thanks info
+
+2001-07-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: how to fake the ChangeLog into showing up in the
+	distribution
+
+2001-07-25  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: add YFLAGS so parse.h gets made
+
+2001-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* examples/fastwc/README, examples/fastwc/mywc.c,
+	examples/fastwc/wc1.l, examples/fastwc/wc2.l,
+	examples/fastwc/wc3.l, examples/fastwc/wc4.l, examples/fastwc/wc5.l: 
+	re-add these files
+
+2001-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: reflect recent doings
+
+2001-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.in: what with automake, we don't need Makefile.in any
+	more
+
+2001-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: more rearranging for automake
+
+2001-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* to.do/flex.rmail: more mail came in
+
+2001-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* autogen.sh: adjust to automake's idea of the world
+
+2001-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: add Vern's misc dependencies; noinst_SCRIPTS was
+	broken?; list a few last files to be included in the distribution
+
+2001-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: rearrange for better order; add automake support as a news
+	item
+
+2001-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: copyright notice on Makefile.am; document some -D
+	switches (are they still usable?)
+
+2001-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: add lex-replacement issue
+
+2001-07-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: add EXTRA_DIST
+
+2001-07-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* autogen.sh: we need to do the same thing in each directory
+
+2001-07-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: introduce automake into the macro calls
+
+2001-07-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: add AUTOMAKE_OPTIONS, info_TEXINFOS, include_HEADERS,
+	noinst_HEADERS; it's libfl.a, not libflex.a
+
+2001-07-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.am: bin_PROGRAMS and lib_LIBRARIES
+
+2001-07-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* to.do/streams.mail: streams.mail has moved here
+
+2001-07-23  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: add xref for teximanual
+
+2001-07-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.1: include typo/punctuation fixes from a patch submitted by
+	noon@cote-dazur.com (Fabrice Bauzac)
+
+2001-07-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: we want gettext
+
+2001-06-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: include c++ STD fixes from quanstro@quanstro.net
+
+2001-06-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl, gen.c: change some int types to size_t as per FreeBSD
+	28364 from avn@any.ru
+
+2001-06-24  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: remove parse.[ch] from make clean target; repackage
+	distribution (not rework)
+
+2001-06-19  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: add memory api and reworking of flex.skl reworking
+
+2001-06-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: remove extraneous notice from flex.skl
+
+2001-06-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: patch memory leak as per millaway
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* to.do/flex.rmail: add vern's ok for copyright/license changes and
+	john's answer on line offsets
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: remove creation of .cvsignore files (it's done); add other
+	notes about the test suite
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/.cvsignore, tests/test-basic-nr/.cvsignore,
+	tests/test-basic-r/.cvsignore, tests/test-bison-yylloc/.cvsignore,
+	tests/test-bison-yylval/.cvsignore,
+	tests/test-include-by-buffer/.cvsignore,
+	tests/test-include-by-reentrant/.cvsignore,
+	tests/test-prefix-nr/.cvsignore, tests/test-prefix-r/.cvsignore,
+	tests/test-pthread/.cvsignore, tests/test-string-nr/.cvsignore,
+	tests/test-string-r/.cvsignore, tests/test-yyextra/.cvsignore: 
+	adding .cvsignore files for existing tests/ subdirectories
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/README: reformat, say to add a description to this file and
+	mention what to do re .cvsignore
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/TEMPLATE/cvsignore: create template for .cvsignore
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: reorganize for logical reasons; test suite now seems to run
+	out of the box
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/.cvsignore: we dont want the Makefile either
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/test-prefix-nr/test.input, tests/test-prefix-r/test.input: 
+	test.input was supposed to be here
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/.cvsignore: add autoconf legacy files to be ignored
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* autogen.sh: clarify usage instructions; prepare tests/ as well
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/.cvsignore: . cvsignore for tests/ subdirectory
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* FlexLexer.h: tell emacs that FlexLexer.h is c++
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* scan.l: tell emacs scan.l is in C mode
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: added punctuation
+
+2001-06-17  Will Estes <wlestes@users.sourceforge.net>
+
+	* FlexLexer.h, Makefile.in, README, RoadMap, autogen.sh, ccl.c,
+	configure.in, dfa.c, ecs.c, flex.1, flex.skl, flexdef.h, gen.c,
+	libmain.c, libyywrap.c, main.c, misc.c, mkskel.sh, nfa.c, parse.y,
+	scan.l, sym.c, tblcmp.c, yylex.c: change copyright/license notices
+	as per Vern's response to Theo
+
+2001-06-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* to.do/flex.rmail: add bill fenlason's emails
+
+2001-06-15  Will Estes <wlestes@users.sourceforge.net>
+
+	* COPYING: make changes as per Theo De Raadt; remove tabs
+
+2001-06-08  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl: save errno as per Theo de Raadt
+
+2001-06-07  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.1: correct hyphenation as per openbsd tree
+
+2001-06-05  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.in, configure.in: change references to TESTS/ to tests/
+	to account for the directory name changes
+
+2001-05-27  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl, gen.c: commit john millaway's YY_G wrapper corrections
+
+2001-05-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/Makefile.in: remove || exit calls
+
+2001-05-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* gen.c: complete john millaway's reentrant patch
+
+2001-05-21  Will Estes <wlestes@users.sourceforge.net>
+
+	* to.do/flex.rmail:  more flex messages in the queue
+
+2001-05-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.skl, flexdef.h, gen.c, main.c, nfa.c, scan.l: john millaway's
+	reentrancy patch
+
+2001-05-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/Makefile.in: remove || exit from testing loop
+
+2001-05-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.in: tell make about the tests directory and its
+	associated targets
+
+2001-05-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: rethink the todo list
+
+2001-05-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.1: describe reentrant api changes
+
+2001-05-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* TODO: mention work needed for tests/
+
+2001-05-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: tell auto* about the test directory
+
+2001-05-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* README: make punctuation uniform, mention the new tests/ directory
+
+2001-05-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* NEWS: reformat items; cut out old items and move them to ONEWS
+
+2001-05-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* ONEWS: move old NEWS items to ONEWS
+
+2001-05-18  Will Estes <wlestes@users.sourceforge.net>
+
+	* tests/Makefile.in, tests/README, tests/TEMPLATE/Makefile.in,
+	tests/TEMPLATE/parser.y, tests/TEMPLATE/scanner.l,
+	tests/TEMPLATE/test.input, tests/configure.in,
+	tests/test-basic-nr/Makefile.in, tests/test-basic-nr/scanner.l,
+	tests/test-basic-nr/test.input, tests/test-basic-r/Makefile.in,
+	tests/test-basic-r/scanner.l, tests/test-basic-r/test.input,
+	tests/test-bison-yylloc/Makefile.in,
+	tests/test-bison-yylloc/parser.y,
+	tests/test-bison-yylloc/scanner.l,
+	tests/test-bison-yylloc/test.input,
+	tests/test-bison-yylval/Makefile.in,
+	tests/test-bison-yylval/parser.y,
+	tests/test-bison-yylval/scanner.l,
+	tests/test-bison-yylval/test.input,
+	tests/test-include-by-buffer/Makefile.in,
+	tests/test-include-by-buffer/scanner.l,
+	tests/test-include-by-buffer/test-1.input,
+	tests/test-include-by-buffer/test-2.input,
+	tests/test-include-by-buffer/test-3.input,
+	tests/test-include-by-reentrant/Makefile.in,
+	tests/test-include-by-reentrant/scanner.l,
+	tests/test-include-by-reentrant/test-1.input,
+	tests/test-include-by-reentrant/test-2.input,
+	tests/test-include-by-reentrant/test-3.input,
+	tests/test-prefix-nr/Makefile.in, tests/test-prefix-nr/README,
+	tests/test-prefix-nr/scanner.l, tests/test-prefix-r/Makefile.in,
+	tests/test-prefix-r/README, tests/test-prefix-r/scanner.l,
+	tests/test-pthread/Makefile.in, tests/test-pthread/scanner.l,
+	tests/test-pthread/test-1.input, tests/test-pthread/test-2.input,
+	tests/test-pthread/test-3.input, tests/test-pthread/test-4.input,
+	tests/test-pthread/test-5.input, tests/test-string-nr/Makefile.in,
+	tests/test-string-nr/scanner.l, tests/test-string-r/Makefile.in,
+	tests/test-string-r/scanner.l, tests/test-yyextra/Makefile.in,
+	tests/test-yyextra/scanner.l, tests/test-yyextra/test.input: add
+	john millaway's test directory
+
+2001-05-04  Will Estes <wlestes@users.sourceforge.net>
+
+	* to.do/flex.rmail: more mail in flex.rmail
+
+2001-05-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* FlexLexer.h, ccl.c, dfa.c, ecs.c, flex.skl, flexdef.h, gen.c,
+	libmain.c, libyywrap.c, main.c, misc.c, nfa.c, parse.y, scan.l,
+	sym.c, tblcmp.c, yylex.c: remove extraneous rcs keywords
+
+2001-05-03  Will Estes <wlestes@users.sourceforge.net>
+
+	* README: mention RoadMap
+
+2001-05-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* examples/README, examples/debflex.awk, examples/manual/ChangeLog,
+	examples/manual/Makefile, examples/manual/README,
+	examples/manual/cat.lex, examples/manual/dates.lex,
+	examples/manual/datetest.dat, examples/manual/eof_rules.lex,
+	examples/manual/eof_test01.txt, examples/manual/eof_test02.txt,
+	examples/manual/eof_test03.txt, examples/manual/expr.lex,
+	examples/manual/expr.y, examples/manual/front.lex,
+	examples/manual/front.y, examples/manual/j2t.lex,
+	examples/manual/myname.lex, examples/manual/myname.txt,
+	examples/manual/myname2.lex, examples/manual/numbers.lex,
+	examples/manual/pas_include.lex, examples/manual/pascal.lex,
+	examples/manual/reject.lex, examples/manual/replace.lex,
+	examples/manual/string1.lex, examples/manual/string2.lex,
+	examples/manual/strtest.dat, examples/manual/unput.lex,
+	examples/manual/user_act.lex, examples/manual/userinit.lex,
+	examples/manual/wc.lex, examples/manual/yymore.lex,
+	examples/manual/yymore2.lex, examples/manual/yymoretest.dat,
+	examples/testxxLexer.l, to.do/README, to.do/Wilhelms.todo,
+	to.do/Wish-List, to.do/flex.rmail, to.do/unicode/FlexLexer.h,
+	to.do/unicode/ccl.c, to.do/unicode/changes.txt,
+	to.do/unicode/ecs.c, to.do/unicode/flex.1, to.do/unicode/flex.skl,
+	to.do/unicode/flexdef.h, to.do/unicode/gen.c, to.do/unicode/main.c,
+	to.do/unicode/misc.c, to.do/unicode/scan.l, to.do/unicode/tblcmp.c: 
+	adding the rest of vern's files
+
+2001-05-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* README: mention misc/ directory
+
+2001-05-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* version.h: version is 2.5.5b
+
+2001-05-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* Makefile.in: remove header from top; add rule to generate
+	initscan.c just in case
+
+2001-05-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* configure.in: dont check for initscan.c; check for scan.l instead
+
+2001-05-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* RoadMap: list of source files
+
+2001-05-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* README: rewrite README to reflect changes in layout of directories
+
+2001-05-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* AUTHORS, THANKS, TODO: initial attempt at the files
+
+2001-05-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* COPYING: add 2001 copyright notice
+
+2001-05-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* autogen.sh: initial attempt at a bootstrap script for developers
+
+2001-05-01  Will Estes <wlestes@users.sourceforge.net>
+
+	* flex.texi: texinfo manual, old contributed version
+
+2000-08-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: fixed some bugs in examples of [[:...:]] ccls
+
+2000-08-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* version.h: version shipped to Dick King
+
+2000-08-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: explicit include of iostream.h
+
+2000-08-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: if a newline is seen in <ACTION_STRING>, assume it
+	terminates the string.
+
+2000-08-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h, sym.c: moved symbol table definitions from flexdef.h
+	into sym.c
+
+2000-08-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: fixed underallocation for accset
+
+1997-06-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* COPYING: revised for rms
+
+1997-06-23  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: fixed memory leak
+
+1997-06-23  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1:  input() doesn't destroy yytext
+
+1997-06-23  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: wrapped with extern "C++"
+
+1996-12-13  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: use delete [] for yy_state_buf
+
+1996-10-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: fixed %option noinput
+
+1996-10-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: free(char*) fix ... Sigh ...
+
+1996-10-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: bug fix for yymore()/yylineno interaction
+
+1996-10-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: fixed memory leak
+
+1996-09-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: release 2.5.4
+
+1996-09-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: more stuff for distclean
+
+1996-09-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: "str" -> "yy_str"
+
+1996-09-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* version.h: 2.5.4
+
+1996-07-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: (attempted) fix for input() crossing a file boundary
+
+1996-05-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: don't do Acorn diffs
+
+1996-05-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: some minor additions for 2.5.3
+
+1996-05-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS, version.h: 2.5.3
+
+1996-05-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: initialize yy_more_offset etc. for yyFlexLexer class
+
+1996-05-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: niggling cosmetic tweak
+
+1996-05-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: bug fixes for yymore (especially with %array)
+
+1996-05-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: yymore + %array tweaks
+
+1996-05-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: added yy_{,prev_}more_offset
+
+1996-05-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: removed decl of unused library function
+
+1996-05-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: snapshot of cscope yymore fixes, prior to switching
+	yymore-on-%array approach
+
+1995-12-18  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: don't stack states on NUL-transitions that are jams
+
+1995-09-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* libmain.c: fixed re Esmond Pitt's ancient suggestion
+
+1995-04-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: ANSI C / Solaris tweak
+
+1995-04-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: credits
+
+1995-04-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: multiple FlexLexer.h includes
+
+1995-04-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: fix multiple inclusions
+
+1995-04-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: lint tweak
+
+1995-04-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: typo fixed
+
+1995-04-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: credits update
+
+1995-04-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: (char*) cast for realloc
+
+1995-04-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: (char*) tweak
+
+1995-04-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: VMS update for 2.5.2
+
+1995-04-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: clarify when 8-bit scanners are created by default,
+	vs. 7-bit
+
+1995-04-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: reworked alloca() chud, from Francois
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS, version.h: 2.5.2
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: 2.5.2 update
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c, main.c: const -> yyconst
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: fixed some old libfl.a references
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: some (but not all) of Francois' tweaks
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* configure.in: tweaks from Francois
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: yy_delete_buffer allows nil buffer pointer
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: do_stdinit now defaults to false
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: remove first default for yylex(new_in, new_out)
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: rearrange some definitions; fix YY_NO_UNPUT
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: more alloca() bullshit
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: octal escape sequence must have just digits 0-7
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: '-' means stdin octal escape sequence must just be digits
+	0-7
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: -- terminates options
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: added dataflush() prototype
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: move dataflush, otoi prototypes into flexdef.h
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, gen.c: const -> yyconst
+
+1995-04-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: fixed bug in needing yy_cp for -Cf w/ backing up
+
+1995-03-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* README, flex.1: Stan Adermann credit
+
+1995-03-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: beta-tester update
+
+1995-03-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS, version.h: 2.5.1
+
+1995-03-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: update date for 2.5.1 release, some feedbacker credits
+
+1995-03-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: fixed lint problem with declaring yy_cp unnecessarily
+
+1995-03-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: {}'s around full-table initializations
+
+1995-03-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: for version 2.5
+
+1995-03-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: added note regarding yylineno should be maintained on a
+	per-buffer basis
+
+1995-03-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: new C++ member functions
+
+1995-03-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS, flex.1: 2.5.0.8 update
+
+1995-03-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: rename yylineno if -P
+
+1995-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: do_yylineno MARKER_DIFFERENCE depends on MAXIMUM_MNS
+
+1995-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: removed redundant skel.c from DISTFILES
+
+1995-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: debug(), setdebug(), lineno()
+
+1995-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: %option yylineno support
+
+1995-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: read up to newline for interactive reads, rather than one
+	char
+
+1995-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c, scan.l: added %option yylineno
+
+1995-03-18  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: added do_yylineno
+
+1995-03-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS, flex.1: 2.5.0.7
+
+1995-03-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: realclean -> maintainer-clean
+
+1995-03-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Added yy_flush_buffer
+
+1995-03-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: added yy_flush_buffer
+
+1995-03-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: prefix support for yy_flush_buffer
+
+1995-03-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: added %option yyclass
+
+1995-03-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h, main.c, scan.l: added yyclass
+
+1995-03-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: Added switch_streams
+
+1995-03-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: added switch_streams
+
+1995-03-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: don't rename yy_flex_debug for C++
+
+1995-03-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: yy_flex_debug extern only if not C++
+
+1995-03-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: added yy_flex_debug member variable
+
+1995-03-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: yyFlexLexer initialization of yy_flex_debug
+
+1995-03-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h, main.c: VMS POSIX stuff
+
+1995-03-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: moved position of yy_init = 0
+
+1995-03-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: added YY_EXIT_FAILURE
+
+1995-03-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: removed VMS-specific exit
+
+1995-03-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c, flexdef.h, gen.c, main.c, misc.c, nfa.c, scan.l, sym.c,
+	yylex.c: internationalization aids
+
+1995-03-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: do yy_flex_debug prefix for both C++ and C
+
+1995-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: fixed program_name tweak again
+
+1995-01-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: oops, fixed program_name tweak
+
+1995-01-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: program_name is "flex" if argv[0] nil
+
+1995-01-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.5.0.5
+
+1995-01-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Documented YY_NUM_RULES
+
+1995-01-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: added formatted man page to MISC
+
+1995-01-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: help messages to stdout
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Added YY_NUM_RULES
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: better fix for #pragma problem
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: better fix for #pragma portability problem
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: "# line" -> #line
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, flexdef.h: comment out Turbo C #pragma's
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: reset linenum on new file
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: isatty() extern
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS, flex.1: 2.5.0.4
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: long options, VMS tweaks
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Added parse.c, parse.h for dist MISC directory
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: some "const" cleansing
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* mkskel.sh: skel[] is now const
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: some const cleansing
+
+1995-01-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: #line in section 1
+
+1995-01-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* sym.c: preen
+
+1994-12-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* configure.in: config.h from conf.in
+
+1994-12-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: for VMS, delete -> remove
+
+1994-12-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: config.h.in -> conf.in rm config.h on distclean
+
+1994-12-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: stdinit tweaks
+
+1994-12-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: added nostdinit
+
+1994-12-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: added MS-DOS note for 2.5.0.2
+
+1994-12-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: typos, tweaks
+
+1994-12-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: removed flexdoc
+
+1994-12-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: flexdoc/flex merge
+
+1994-12-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: typos
+
+1994-12-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: typo
+
+1994-12-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: 2.5 update
+
+1994-12-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.5.0.2
+
+1994-12-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: fixed sense of %option main implying %option noyywrap
+
+1994-12-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: YY_FLEX_{MAJOR,MINOR}_VERSION fixed bug in unput
+	trashing yytext even with %array
+
+1994-12-17  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: prior to 2.5 update
+
+1994-12-17  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: C++/-P fixes
+
+1994-12-17  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: -P fixes constructor, destructor moved to flex.skl
+
+1994-12-17  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: YY_SKIP_YYWRAP yyFlexLexer constructor, destructor
+
+1994-12-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: formatting
+
+1994-12-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: fixed bug in adjusting yytext before backing up
+
+1994-12-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: switched scanner itself over to [:xxx:]
+
+1994-12-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: added YY_FLEX_VERSION
+
+1994-12-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Fixed CCL-match pattern for [:whatever:]
+
+1994-12-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: treat [:upper:] as [:lower:] if -i
+
+1994-12-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.5.0.1
+
+1994-12-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, gen.c: input() maintains BOL
+
+1994-12-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: check size of buffer in yy_scan_buffer
+
+1994-12-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: added %option main, fixed missing %*
+
+1994-12-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: added ccl exprs
+
+1994-12-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: added ccl exprs, %option main
+
+1994-12-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* yylex.c: added %options, ccl exprs
+
+1994-12-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: undid previous change
+
+1994-12-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Makefile.in from srcdir
+
+1994-12-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: added skel.c to DISTFILES
+
+1994-12-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: added YYSTATE alias
+
+1994-12-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: NL is now \r?\n
+
+1994-12-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: use cerr for C++ diagnostics
+
+1994-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: undid YY_UNIX_NEWLINE
+
+1994-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: STDC_HEADERS to check for stdlib
+
+1994-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* configure.in: AC_STDC_HEADERS -> AC_HEADER_STDC
+
+1994-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: \n -> '\012'
+
+1994-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Added YY_UNIX_NEWLINE
+
+1994-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: BOL changes
+
+1994-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: fixed bug with caseins but not ecs
+
+1994-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: BOL changes some casts for Turbo C
+
+1994-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: messages identify filenames
+
+1994-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Increase slowly if realloc double overflows
+
+1994-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c: YY_RULE_SETUP
+
+1994-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Added yy_XX_state %option's Added yy_set_bol
+
+1994-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: don't remove ~ files
+
+1994-11-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: get CFLAGS from autoconf
+
+1994-11-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c, flex.skl, flexdef.h, gen.c, misc.c, parse.y, scan.l, sym.c: 
+	Brian Madsen's tweaks for Borland
+
+1994-11-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* version.h: 2.5.0
+
+1994-11-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Added do_stdinit
+
+1994-11-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: Added yy_delete_buffer() in destructor
+
+1994-11-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Added yy_set_interactive, YY_ALWAYS_INTERACTIVE,
+	 YY_NEVER_INTERACTIVE, YY_NO_INPUT, YY_NO_UNPUT, YY_NO_*_STATE
+
+1994-11-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Added do_stdinit, Think C hacks
+
+1994-11-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Added %options for input, always-interactive,
+	never-interactive, yy_scan_{buffer,bytes,string}
+
+1994-11-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: size_t #ifdef's for not compiling some statics
+
+1994-11-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: $(FLEX) config.h
+
+1994-11-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* configure.in: config.h, size_t, malloc.h, sys/types.h
+
+1994-11-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: config.h, size_t
+
+1994-11-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: yywrap option, no stdin/out init for VMS, mundane tweaks
+
+1994-11-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: alloca, lint tweaks
+
+1994-11-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: %option yywrap size_t tweaks
+
+1994-11-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* tblcmp.c: size_t tweaks
+
+1994-11-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: size_t, STDC tweaks
+
+1994-11-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Added yy_scan_{buffer,bytes,string}, plus tweaks
+
+1994-10-12  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: made stack code conditional on "stack" option
+
+1994-10-12  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: added use of "stack" %option
+
+1994-08-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Fixed fencepost in call to yy_flex_strncpy
+
+1994-07-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: yy_eof_status -> yy_buffer_status
+
+1994-07-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: yy_flex_strcpy -> yy_flex_strncpy minor prototype tweak
+
+1994-07-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Bug fix for matching NUL's at end of token when
+	interactive.  yy_flex_strcpy -> yy_flex_strncpy
+
+1994-07-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c: No YY_USER_ACTION if continued action
+
+1994-03-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Added fix for 8-bit chars returned by input()
+
+1994-03-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Move definition of yy_flex_strcpy to come after #define
+	of yytext_ptr
+
+1994-01-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* mkskel.sh: flex.skel -> flex.skl
+
+1994-01-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* mkskel.sh: Initial revision
+
+1993-12-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Fixed scan.c target so "make" detects flex failure
+
+1993-12-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Added %option's
+
+1993-12-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Nuked FLEX_FLAGS that are now done using %option
+
+1993-12-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y, scan.l: %option
+
+1993-12-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Reworked for %option
+
+1993-12-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Added "unspecified", globals for %option
+
+1993-12-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* sym.c: start condition #define's go to action file
+
+1993-12-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Added action_define()
+
+1993-12-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Minor consolidation using scon scopes etc
+
+1993-12-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Modified to use scon scopes
+
+1993-12-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: indented rules
+
+1993-12-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: Added scon_stk stuff, format_warn
+
+1993-12-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Added format_warn
+
+1993-12-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: Working checkpoint prior to adding <scon>{ stuff
+
+1993-12-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h, main.c: Added in_rule, deleted actvsc
+
+1993-12-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Added doubling of '\'s in filenames
+
+1993-12-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Added in_rule, doing_rule_action
+
+1993-12-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* sym.c: Removed actvsc
+
+1993-12-23  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: -ooutput #line directives credits
+
+1993-12-23  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Fixsed sense of test for %array
+
+1993-12-23  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.5.0 snapshot for Craig
+
+1993-12-23  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: Added beginnings of <SCON>{ ... }
+
+1993-12-23  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Simplified scanning {}'s
+
+1993-12-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Added <stdlib.h>
+
+1993-12-17  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: prototypes for alloc/string routines
+
+1993-12-17  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: alloc, string routines internal
+
+1993-12-17  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Nuked lib{string,alloc}.c, added dependency of
+	yylex.o on parse.h
+
+1993-12-17  Vern Paxson <vern@ee.lbl.gov>
+
+	* configure.in: Check for string.h
+
+1993-12-17  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Use autoconf for string/strings.h yy_flex_XXX ->
+	flex_XXX
+
+1993-12-17  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Added flex_XXX -> yy_flex_XXX wrappers
+
+1993-12-17  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c, misc.c, sym.c: yy_flex_XXX -> flex_XXX
+
+1993-12-17  Vern Paxson <vern@ee.lbl.gov>
+
+	* yylex.c: No more WHITESPACE token
+
+1993-12-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h, flex.skl: Added yy_top_state()
+
+1993-12-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: simplified comment-scanning using push/pop states
+
+1993-12-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: removed crufty WHITESPACE token, some uses of '\n' token
+
+1993-12-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: start stack, extern "C++" moved
+
+1993-12-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: Bug fix for -CF
+
+1993-12-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h, misc.c: alloc routines take unsigned
+
+1993-12-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: start-state stacks, alloc routines take unsigned
+
+1993-12-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h, misc.c: bracket -CF table elements
+
+1993-12-13  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Do #bytes computation in {re,}allocate_array() only once
+
+1993-12-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, flexdef.h, gen.c, main.c, misc.c, scan.l, sym.c: 
+	yy_str*() -> str*()
+
+1993-12-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in, dfa.c, flexdef.h, gen.c, main.c, misc.c, nfa.c,
+	parse.y, scan.l, sym.c: -o option
+
+1993-12-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: lint tweak
+
+1993-12-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: Expanded on extern "C++" news item
+
+1993-12-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.4.5
+
+1993-12-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Added yy_fill_buffer
+
+1993-12-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: is_interactive -> yy_is_interactive
+
+1993-12-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Updated credits
+
+1993-12-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Fixed typo in "uninstall" target
+
+1993-12-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Updated comment regarding 0-based vs. 1-based arrays for
+	-CF.
+
+1993-12-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: Initialize dfaacc[0] for -CF representation Fixed minor
+	memory leak
+
+1993-12-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: #include "FlexLexer.h" -> <FlexLexer.h>
+
+1993-12-11  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: Added extern "C++" wrapper
+
+1993-12-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Detect REJECT etc. before generating YY_USES_REJECT!
+
+1993-12-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Fixed bug in interactive reads where char is unsigned
+
+1993-12-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: Fixed bug in treating '$' as variable trailing context
+
+1993-12-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* version.h: 2.4.5
+
+1993-12-07  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: pretester update
+
+1993-12-07  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.4.4
+
+1993-12-07  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: LexError(), C++ experiment warning, credits
+
+1993-12-07  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Fixed 8-bit bug
+
+1993-12-07  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, gen.c: Fixed nasty 8-bit bugs
+
+1993-12-07  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c, ecs.c, flexdef.h, gen.c, main.c, nfa.c, tblcmp.c: 
+	{min,max,abs} -> {MIN,MAX,ABS}
+
+1993-12-07  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h, flex.skl: Support for yyFlexLexer::LexerError
+
+1993-12-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* version.h: 2.4.4
+
+1993-12-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: credits update
+
+1993-12-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: very minor "install" tweaks
+
+1993-12-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, nfa.c: YY_USER_ACTION generated now for each case in
+	action switch
+
+1993-12-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Fixed bug in pointing yyin at a new file and resuming
+	scanning
+
+1993-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: Added note regarding g++ 2.5.X
+
+1993-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: updated credits
+
+1993-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: ranlib addition for 2.4.3
+
+1993-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Minor tweak to last change
+
+1993-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: run ranlib on libfl.a
+
+1993-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: Hopefully last update prior to 2.4.3
+
+1993-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h, gen.c, misc.c, sym.c: lint tweaks
+
+1993-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Added exec_prefix
+
+1993-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: credit update
+
+1993-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: lint tweak
+
+1993-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: FlexLexer.h fixed for separate inclusion
+
+1993-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h, flex.skl, main.c: mods so FlexLexer.h can be included
+	separately
+
+1993-12-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: -F incompatible with -+
+
+1993-12-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: Elaborated comments for 2.4.3
+
+1993-12-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.4.3
+
+1993-12-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Updated message regarding missing libfl.a routines Added
+	thanks to Noah Friedman
+
+1993-12-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Added libstring.c Modified "lint" target to use
+	-Dconst= Added a.out, lex.yy.cc to sundry clean targets
+
+1993-12-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, flexdef.h, gen.c, main.c, misc.c, scan.l, sym.c: Use
+	yy_strXXX() routines instead of <string.h>
+
+1993-12-01  Vern Paxson <vern@ee.lbl.gov>
+
+	* version.h: 2.4.3
+
+1993-12-01  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h, misc.c: yy_flex_xmalloc() moved to misc.c
+
+1993-12-01  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Fixed bug in yy_fatal_error()
+
+1993-12-01  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: ... and remove plain tar file after compression
+
+1993-12-01  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.4.2
+
+1993-12-01  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Produce both compress'd and gzip'd distribution tar
+	files
+
+1993-12-01  Vern Paxson <vern@ee.lbl.gov>
+
+	* version.h: Release 2.4.2
+
+1993-11-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: -a -> -Ca
+
+1993-11-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: described configuration files in manifest
+
+1993-11-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Added intermediate step of copying MISC/alloca.c ->
+	alloca.c Included CPPFLAGS when compiling alloca.c
+
+1993-11-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: Credit to 2.4 pre-testers.
+
+1993-11-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Fixed nasty bug in short/long decl decision
+
+1993-11-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Lowered MAX_SHORT out of increased general paranoia.
+	Added yy_flex_xmalloc() proto
+
+1993-11-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Fixed very minor typo in -v output
+
+1993-11-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Removed vestigal cast to (char) in isupper() call
+
+1993-11-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Added casts to unsigned Char for isascii() calls
+
+1993-11-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: Added #ifdef chud for alloca()
+
+1993-11-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Added alloca
+
+1993-11-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* configure.in: Add AC_ALLOCA if using bison
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Added intermediate file going scan.l -> scan.c
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Removed parse.{c,h} from distribution files, since
+	 they may not be all that portable.
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Fixed %array YYLMAX headaches, added error message if
+	 buffer needs growing but REJECT used
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c, main.c: Fixed YYLMAX headaches
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Documented that buffer can't grow if REJECT used
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Added parse.{c,h} to dist files
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, flexdef.h, gen.c, main.c, misc.c, scan.l: Fixed to
+	buffer section 1 definitions
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* sym.c: Fixed ANSI-C glitch with '%' operator
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Fixed mis-definition of ndlookup()
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.4 -> 2.4.1
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Added install.sh, mkinstalldirs to distribution files
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Added Nathan Zelle, "promoted" Francois
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: only "realclean" removes flex dist depends on flex
+
+1993-11-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h, misc.c: myctoi takes char[] instead of Char[]
+
+1993-11-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: -a -> -Ca all_lower, all_upper -> work on char*
+
+1993-11-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Added -Ca to bigcheck
+
+1993-11-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: -a -> -Ca; fixed help output
+
+1993-11-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c, flex.1: -a -> -Ca
+
+1993-11-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: all_lower, all_upper work on char*
+
+1993-11-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Fixed some casts now that yytext is always char* and never
+	unsigned char*
+
+1993-11-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Francois' tweaks
+
+1993-11-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* configure.in: AC_LN_S, AC_STDC_HEADERS (but not AC_ALLOCA)
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: fixed typo
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Don't remove dist directory
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Include liballoc.c in lint targets
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: lint tweak
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Added -l compression to bigcheck
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: permission tweaking for "dist"
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: more "dist" tweaks
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Changed "make dist" to use version.h, include scan.c
+	in initial dir copy
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* version.h: 2.4.1
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: Revised as per Francois Pinard
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* COPYING: flex.skel -> flex.skl
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: Updated date of 2.4 release
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Removed manual & nroff output from distribution
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.4.1 release
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* configure.in: Initial revision
+
+1993-11-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Merge w/ 2.4.1 changes added "dist2" target
+
+1993-11-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* Makefile.in: Initial revision
+
+1993-11-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Removed #ifndef FILE protection from include of stdio
+
+1993-11-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Added Francois Pinard to distribution headache helpers
+
+1993-11-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Modified C++ scanners to get input a character at a time
+	for interactive scanners.
+
+1993-11-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Added YY_INTERACTIVE.
+
+1993-11-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Put definitions inside ()'s so we can test -l option for
+	"make bigcheck"
+
+1993-11-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Documented YY_INTERACTIVE.
+
+1993-11-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1, flex.skl, flexdef.h, gen.c, main.c, parse.y, scan.l: -l
+	lex compatibility flag
+
+1993-11-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Support for read()/fread() section 1 definitions precede
+	default macro definitions
+
+1993-11-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Added use_read global
+
+1993-11-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Cleaner definition for yymore() Fixed string broken across
+	multiple lines
+
+1993-11-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Added -Cr
+
+1993-11-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: K&R declaration for check_char()
+
+1993-11-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Documented -Cr
+
+1993-11-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: No need to #undef before redefining prior to -Cr
+	documentation
+
+1993-11-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: Heavily massaged for 2.4
+
+1993-11-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Added Landon Noll to thanks.
+
+1993-11-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.4 release
+
+1993-11-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: 2.4 documentation
+
+1993-11-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Added global to remember -P prefix so it can be written in
+	-v summary.  Alphabetized prefix generation, added yywrap
+
+1993-11-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* version.h: updated date for 2.4.0 :-(
+
+1993-10-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: Whitespace tweaking
+
+1993-10-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Use DEFAULT_CSIZE only if not using equivalence classes.
+
+1993-10-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Checkpoint prior to final 2.4 update
+
+1993-10-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: Raw 2.4 changes
+
+1993-10-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: osfcn.h -> unistd.h
+
+1993-10-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Added "static" to definition of yy_fatal_error as well
+	as fwd decl.
+
+1993-10-04  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Added yy_fatal_error function.
+
+1993-10-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, gen.c: Got rid of (char *) casts of yytext, no longer
+	needed.
+
+1993-10-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: YY_CHAR -> char added YYText(), YYLeng()
+
+1993-10-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, gen.c: Minimized use of YY_CHAR
+
+1993-10-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Added "flex++" feature Minimized use of YY_CHAR
+
+1993-10-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Clarified help message for -S
+
+1993-10-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* libyywrap.c, version.h: Initial revision
+
+1993-10-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: If -+ used, output to lex.yy.cc
+
+1993-10-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h, flex.skl: Switched from FILE*'s to stream's
+
+1993-10-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Added expand_nxt_chk() extern.
+
+1993-10-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Added dynamic buffer growing.  Added yyless() for
+	section 3.
+
+1993-10-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c, flexdef.h, gen.c, main.c: Added -a option for long-align.
+
+1993-10-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: formfeed no longer considered whitespace
+
+1993-09-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Nuked FILENAMESIZE
+
+1993-09-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: yyflexlexer.h -> FlexLexer.h minor portability tweak
+
+1993-09-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Added start condition to EOF trace output
+
+1993-09-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Added YY_START changed yyFlexLexer to define yylex()
+
+1993-09-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Minor portability tweaks
+
+1993-09-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: Split into two classes, one fully abstract.  yylex()
+	no longer abstract in yyFlexLexer
+
+1993-09-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: PC lint tweak
+
+1993-09-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: YYSTYPE #define'd to int
+
+1993-09-21  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c: minor lint tweak
+
+1993-09-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* FlexLexer.h: Initial revision
+
+1993-09-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Delete prototypes for Unix system calls.
+
+1993-09-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c, dfa.c, ecs.c, gen.c, main.c, misc.c, nfa.c, parse.y,
+	scan.l, sym.c, tblcmp.c, yylex.c: nuked static RCS string
+
+1993-09-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: %array not allowed with C++ scanners
+
+1993-09-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Fixed bugs regarding %{%} code in section 2 prolog %array
+	not allowed with C++ scanners
+
+1993-08-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Added C_plus_plus flag.
+
+1993-08-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: First version of C/C++ skeleton
+
+1993-08-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: yy_state_type declared earlier.  Made a bunch of statics
+	only output if not -+
+
+1993-08-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Added -+ option, updated usage() output, rearranged some
+	 generated code to come at the right point in the output for
+	yyflexlexer.h.
+
+1993-08-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Added %+/%-/%* to skelout()
+
+1993-08-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: EOF in section 2 prolog leads to section 0, not section 3
+
+1993-08-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* yylex.c: Dump promotion of EOF in section 2 to turn on section 3;
+	 instead just treat it like a final EOF
+
+1993-08-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: yy_nxt table should be "const"
+
+1993-08-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Removed a lot of #ifdef chud "backtracking" -> "backing
+	up"
+
+1993-08-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: "backtracking" -> "backing up" got rid of time reports
+
+1993-08-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: "backtracking" -> "backing up" some portability tweaks
+	fixed to only call flexscan() when done if known to be in section 3
+
+1993-08-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: isascii() moved to flexdef.h nuked flex_gettime()
+
+1993-08-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Fixed bug with empty section 2
+
+1993-08-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* yylex.c: Chucked definition of isascii()
+
+1993-08-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: preserve yytext on input() bug fix when combining
+	yyless() with yymore() checkpoint prior to C++ option
+
+1993-08-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: "backtracking" -> "backing up"
+
+1993-07-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Fixed to not generate extra EOF's after reading one.
+
+1993-07-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Spit out definition of YY_CHAR early
+
+1993-07-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Some rearranging to make sure things get declared in the
+	right order
+
+1993-07-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* tblcmp.c: Some comment fixes as per Wilhelms
+
+1993-07-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Nuked #undef of yywrap, now that it's a function
+
+1993-07-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: Fixed bug with Z-a character classes as per Wilhelms
+
+1993-07-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c: added check_char call in mkstate() to prevent bad xtion
+	chars
+
+1993-07-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Fixed some reallocation bugs, etc. as per Wilhelms
+
+1993-07-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Added check_char(), readable_form()
+
+1993-07-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Added #ifndef's around #define's to let user override
+	Moved a bunch of definitions prior to section 1
+
+1993-07-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: Wilhems bug fixes.
+
+1993-07-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c, misc.c: Added check_char()
+
+1993-06-12  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Changed to use yy_flex_alloc() and friends
+
+1993-06-12  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Added -P flag
+
+1993-06-12  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Fixed bug in lex % directives
+
+1993-06-12  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Modified to use yy_flex_alloc() and friends
+
+1993-06-12  Vern Paxson <vern@ee.lbl.gov>
+
+	* sym.c: Modified to use yy_flex_alloc()
+
+1993-06-12  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Modified to use yy_flex_alloc() and friends Moved some
+	globals earlier in the file to permit access in section 1
+
+1993-06-12  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: Got rid of code needed for %t
+
+1993-04-14  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c, dfa.c, ecs.c, flex.skl, flexdef.h, gen.c, libmain.c,
+	main.c, misc.c, nfa.c, parse.y, scan.l, sym.c, tblcmp.c, yylex.c: 
+	Reformatting.
+
+1993-04-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Fixed bug in description of backtracking
+
+1993-04-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.3.8
+
+1993-04-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, main.c: %array support
+
+1993-04-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Added non-STDC clause for '\a'
+
+1993-04-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Fixed subtle problems regarding '*'s in comments
+	%pointer/%array match entire lines
+
+1993-04-05  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Added %array support
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: Finally updated email addr
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Mostly .LP -> .PP
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: [no log message]
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c, scan.l: A lot of tweaks ...
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c: reallocate_character_array -> reallocate_Character_array
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Bug/lint fixes Modified to work with "action" array instead
+	of temp file
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* sym.c: Fixed bug in 8-bit hashing
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: numerous bug fixes extra formatting of error/warning
+	messages added support of <*>, partial support for nested start
+	conditions
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* ecs.c: Remove %t cruft
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Beginning of %pointer/%array support
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: Added keeping track of which rules are useful fixed a
+	fencepost error in checking for scanners that require -8
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c: Added checking for whether rules are useful modified to
+	work with internal "action" array
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Added internal "action" array, internal skeleton,
+	zero_out() in lieu of bzero
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* tblcmp.c: Fixed a bunch of fencepost errors in increasing tables.
+
+1993-02-06  Vern Paxson <vern@ee.lbl.gov>
+
+	* yylex.c: -Wall fix
+
+1991-03-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Fixed out-of-bounds access bug; patch #7 for release 2.3
+
+1991-03-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: Patch #7 for 2.3
+
+1990-10-23  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: fixed missing "rule_type" entry for end-of-buffer action
+
+1990-08-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Fixed yymore() but in not resetting yy_more_len
+
+1990-08-29  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: Patch #6 for 2.3
+
+1990-08-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: Patch #5
+
+1990-08-14  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: fixed comment in myesc()
+
+1990-08-14  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: fixed date in patch #4
+
+1990-08-14  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: patch #4
+
+1990-08-14  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: fixed hexadecimal escapes; added is_hex_digit()
+
+1990-08-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: Patch #3
+
+1990-08-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, flexdef.h: changed to include <stddef.h> for __GNUC__
+
+1990-08-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.3 patch #2
+
+1990-08-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Another try at getting the malloc() definitions correct;
+	this time for g++, too
+
+1990-08-02  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, flexdef.h: fixed to declare malloc() and free() by hand
+	if __GNUC__
+
+1990-07-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Changed to get malloc definition in identical fashion
+	to that used by flex.skel
+
+1990-06-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: [no log message]
+
+1990-06-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Fixed bug in mini-scanner examle Fixed bug in YY_INPUT
+	redefinition yylineno defense reentrancy documentation Something
+	else which I forget.
+
+1990-06-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* COPYING, ccl.c, dfa.c, ecs.c, flexdef.h, gen.c, main.c, misc.c,
+	nfa.c, parse.y, scan.l, sym.c, tblcmp.c, yylex.c: 4.4 BSD copyright
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: Changed prolog to reflect 2.3 release.
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: pointed reader at Makefile instead of README for porting
+	considerations added Makefile comments: support for SCO Unix;
+	parameterization
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Added DONT_HAVE_STDLIB_H and declarations of malloc()
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.3 changes
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: documentation on new features Comment regarding Ove's work
+	^foo|bar difference between flex / lex yyin initialization
+	difference documented that yy_switch_to_buffer can be used in
+	yywrap() documented that # comments are deprecated
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: declared void functions as such added prototypes for
+	forward references changed to check for error status when closing
+	files
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* yylex.c: Added macro definition for isascii() if not already
+	present
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* sym.c: declared void functions as such added prototypes for
+	forward references changed to use format_pinpoint_message where
+	appropriate
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: declared void functions as such changed to strip #
+	comments, as documented moved #undef of yywrap() to before include
+	    of flexdef, so prototype doesn't get screwed up
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: introduced format_pinpoint_message() declared void
+	functions as such changed lone <<EOF>> to apply to all outstanding
+	start conditions
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c, tblcmp.c: declared void functions as such added prototypes
+	for forward references
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: declared void functions as such prototypes for forward
+	references shuffled around some routines to make the order perhaps a
+	little more logical changed memory references to use void* instead
+	of char*
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* libmain.c: Added declaration of arguments made yylex() a function
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: prototypes for forward references declared void functions
+	as such yy_flex_debug testing of error on file closes casts to void
+	for sprintf() and strcpy()
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Added prototypes changed memory allocation routines to
+	deal with void*'s instead of char*'s some rearranging for VMS
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Added YY_USER_INIT Added yy_new_buffer() alias for
+	yy_create_buffer() fixed (hopefully) malloc declaration headaches
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* ecs.c: declared void functions as such declared void functions as
+	such
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: prototypes for forward references declared void functions
+	as such
+
+1990-05-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c: Declared void functions as such
+
+1990-04-12  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: added fix for allowing yy_switch_to_buffer() in yywrap()
+
+1990-04-03  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: patch #3 - -I fix
+
+1990-03-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Changed generation of archaic "continue" to "goto
+	yy_find_action"
+
+1990-03-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: Patch #2 changes
+
+1990-03-27  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: fixed fencepost errors with yy_buf_size and detecting
+	NUL's
+
+1990-03-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: [no log message]
+
+1990-03-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: g++ tweaks
+
+1990-03-23  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: Changes for Patch #1.
+
+1990-03-23  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: fix for g++
+
+1990-03-23  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: minor typos and formatting changes.  Removed BITNET
+	address.
+
+1990-03-23  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: nuked BITNET address.
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: 2.2 README
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: USG alias.
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Added USG alias for SYS_V
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* : [no log message]
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Tweaks for lint and C++
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: -ll => -lfl
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: 2.2 changes
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Changed to use YY_BUFFER_STATE everywhere.
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: [no log message]
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: "associated rules" changed to "associated rule line
+	numbers".
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: cast added to malloc() call to keep lint happy.
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* yylex.c: Fixed handling of premature EOF's.
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* sym.c: Removed declaration of malloc()
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Removed malloc() declaration.  Added detection of EOF in
+	actions.
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: Rules rewritten so '/' and '$' parsed correctly.
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c: Corrected line numbers for continued actions.
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Removed declarations of malloc() and realloc().
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Summary of generation flags.  Minor -8 tweaks.
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: full support for -d
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: defines for malloc() and realloc() conditional defines
+	for abs(), min(), and max()
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Many multiple-buffer additions.
+
+1990-03-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: -8 tweaks.
+
+1990-03-19  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Proto hacks.  NUL hacks.  Debugging hacks.  C++ hacks.
+
+1990-03-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* : RCS won't let me unedit! gets "Missing access list"
+
+1990-03-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* tblcmp.c: Minor tweaks for NUL's.
+
+1990-03-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* : no changes -- had checked out for testing smaller read buffer
+	sizes
+
+1990-03-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c: hack for NUL's.
+
+1990-03-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Hack to cshell for NUL's.
+
+1990-03-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: NUL's.  -8
+
+1990-03-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: NUL's.
+
+1990-03-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: NUL's.  8-bit chars.
+
+1990-03-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: NUL's; indenting
+
+1990-03-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: more thrashing around with NUL's
+
+1990-03-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c: removed NUL hack
+
+1990-03-14  Vern Paxson <vern@ee.lbl.gov>
+
+	* yylex.c: Added <<EOF>> token
+
+1990-03-14  Vern Paxson <vern@ee.lbl.gov>
+
+	* ecs.c, flexdef.h:  Tweaks for NUL chars.
+
+1990-03-14  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c, gen.c, main.c, misc.c, parse.y, scan.l, tblcmp.c: Tweaks
+	for NUL chars.
+
+1990-03-14  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c: Tweaks for handling NUL's.
+
+1990-02-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: [no log message]
+
+1990-02-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Changed .so options.man to inlined version since flex.1
+	will have a different (shorter) options description.
+
+1990-02-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: [no log message]
+
+1990-02-28  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: [no log message]
+
+1990-02-26  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: [no log message]
+
+1990-02-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: [no log message]
+
+1990-02-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.1: Initial revision
+
+1990-01-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Restored EOB accepting list for REJECT.  Second try at 2.2
+	Release.
+
+1990-01-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Added missing ',' in error message.  2.2 Release, second
+	try.
+
+1990-01-16  Vern Paxson <vern@ee.lbl.gov>
+
+	* yylex.c: 8-bit char support.  2.2 Release.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: 8-bit char support.  Arbitrary indented/%{} code allowed
+	in section 2.  \x escapes.  %t support.  Minor POSIX-compliance
+	changes.  BEGIN(0) -> BEGIN(INITIAL).  yywrap() and set_input_file()
+	for multiple input files.  C_COMMENT_2 removed.  2.2 Release.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: 8-bit char support.  SYS_V / Atari portability fixes.
+	Removed generated array names.  CSIZE now only defined if not
+	already defined.  Added "csize" global.  Added "input_files",
+	"num_input_files", and "program_name" globals.  %t support globals.
+	2.2 Release.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Removed unused EOB_accepting_list array.  2.2 Release.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Bug in -F table generation fixed.  8-bit char support.
+	Hardwired generated array names.  "const"'s added to generated code.
+	Fixed yymore() / trailing context bug.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: 8-bit char support.  Error-message pinpointing.  2.2
+	Release.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Unsigned char support.  %t support.  Removed hard-wiring
+	of program name "flex".  -c changed to -C; -c now deprecated.  -n
+	added. :-( Multiple input files.  SYSV tmpnam() use.  Removed old
+	#define's from output.  Identified error messages w/ filename and
+	line.  2.2 Release.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* sym.c: Unsigned char support.  2.2 Release.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c: Removed redundant test.  2.2 Release.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: Unsigned char support.  \x support.  2.2 Release.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* tblcmp.c: 8-bit char support.  2.2 Release.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: C++ support.  Turbo-C support.  8-bit char support.
+	yyleng is an int.  unput() callable in section 3.  yymore hacks.
+	yyrestart() no longer closes stdin.  2.2 Release.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* ecs.c: %t support.  8-bit/unsigned char support.  2.2 Release.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: %t hacks.  minor cosmetics.  2.2 Relase.
+
+1990-01-15  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c: Changes for unsigned/8-bit chars.  2.2 Release.
+
+1990-01-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* libmain.c: Initial revision
+
+1989-12-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c: removed gratuitous trailing context code
+
+1989-12-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: made -c<compression flags> case-sensitive
+
+1989-12-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: unput() bug fix
+
+1989-12-30  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: [no log message]
+
+1989-06-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: changed to not use '|' and trailing context combo so users
+	can test using -F ...
+
+1989-06-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: made trailing context combined with '|' warning always
+	come out
+
+1989-06-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: [no log message]
+
+1989-06-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* COPYING: Initial revision
+
+1989-06-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS, README, main.c: [no log message]
+
+1989-06-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: [no log message]
+
+1989-06-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS, README, main.c: [no log message]
+
+1989-06-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* : Beta release
+
+1989-06-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS, main.c: [no log message]
+
+1989-06-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl, flexdef.h, gen.c, misc.c, nfa.c, parse.y, scan.l, sym.c: 
+	2.0.1 beta
+
+1989-06-20  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: [no log message]
+
+1989-05-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: fixsed bug with -I and backtracking
+
+1989-05-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Cleaned up forward declarations of yyunput() and input()
+
+1989-05-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: Split copyright string.
+
+1989-05-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c: Split copyright string.  Added check for empty machine in
+	dupmachine().
+
+1989-05-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c, dfa.c, ecs.c, gen.c, main.c, misc.c, scan.l, sym.c,
+	tblcmp.c, yylex.c: Split copyright string into two to avoid tempting
+	fate with \<newline> sequences ...
+
+1989-05-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: updated for 2nd release Beta test added RCS header
+
+1989-05-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: removed static char copyright
+
+1989-05-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Added BSD copyright notice.  Removed
+	FAST_SKELETON_FILE.
+
+1989-05-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: added BSD copyright notice.  Removed references to
+	FAST_SKELETON_FILE.
+
+1989-05-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* ecs.c, gen.c, nfa.c: Added BSD copyright notice
+
+1989-05-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c, dfa.c, misc.c, parse.y, scan.l, sym.c, tblcmp.c, yylex.c: 
+	added BSD copyright notice
+
+1989-05-24  Vern Paxson <vern@ee.lbl.gov>
+
+	* flex.skl: Initial revision
+
+1989-05-19  Vern Paxson <vern@ee.lbl.gov>
+
+	* yylex.c: renamed accnum to num_rules
+
+1989-05-19  Vern Paxson <vern@ee.lbl.gov>
+
+	* tblcmp.c: moved table generation code to gen.c moved ntod() to
+	dfa.c
+
+1989-05-19  Vern Paxson <vern@ee.lbl.gov>
+
+	* sym.c: the most piddling format change imaginable
+
+1989-05-19  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: changed to look for yymore, REJECT, %used and %unused
+	removed gross magic for dealing with section 3
+
+1989-05-19  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c, parse.y: changes for variable trailing context
+
+1989-05-19  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: added all_lower() and all_upper()
+
+1989-05-19  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: added checking for features being Really used
+	backtracking, performance reports misc. cleanup
+
+1989-05-19  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: major overhaul for merged skeleton
+
+1989-05-19  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: a zillion changes/additions/cleanups
+
+1989-05-19  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: added backtrack report added checking for dangerous
+	trailing context considerable minor cleanup
+
+1989-05-19  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c: list_character_set() modified to take a FILE to write to
+	...
+
+1989-05-19  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: updated for beta release
+
+1988-11-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: added -p flag generation of #define's for scanner
+
+1988-11-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: Added END_OF_BUFFER_ACTION and bol_needed
+
+1988-11-25  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: added ntod()
+
+1988-05-09  Vern Paxson <vern@ee.lbl.gov>
+
+	* gen.c: Initial revision
+
+1988-05-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* yylex.c: RCS header changed display style of non-printings from ^x
+	to \0xx
+
+1988-05-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* tblcmp.c: RCS header MAX_XTIONS_FOR_FULL_INTERIOR_FIT ->
+	MAX_XTIONS_FULL_INTERIOR_FIT made back-tracking accepting number be
+	  one greater than the last legit accepting number, instead of 0.
+	  This way, end-of-buffer can take 0 and no negative accepting numbers
+	are needed.  added genftbl() changed last ftl references to C added
+	check for UNSIGNED_CHAR's added back-track logic to make_tables()
+	added checking and report for backtracking fixed fence-post error
+	with onesp stack pointer
+
+1988-05-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* sym.c: RCS header changed "entry" to "sym_entry" to avoid conflict
+	with old keyword
+
+1988-05-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: RCS header removed \^ from ESCSEQ
+
+1988-05-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: RCS header bug fix due to missing default rule, could
+	  have to backtrack when backtrack variables haven't been set up
+
+1988-05-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c: RCS ident yy_cp, yy_bp support name shortenings assoc_rule
+	support
+
+1988-05-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: RCS header check before malloc()'ing for 16 bit overflow
+	MS_DOS, VMS ifdef's removed commented-out \^ code removed FTLSOURCE
+	code added readable_form()
+
+1988-05-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: Added RCS header removed revision history misc additions
+	and fixes to globals VMS ifdef's backtracking statistics -p flag
+	name shortenings
+
+1988-05-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: removed revision history added RCS header added VMS,
+	MS_DOS ifdef's removed DEFAULT_ACTION, changed END_OF_BUFFER_ACTION
+	shortened MAX_XTIONS_FOR_FULL_INTERIOR_FIT to
+	MAX_XTIONS_FULL_INTERIOR_FIT added MAX_ASSOC_RULES added
+	performance_report, assoc_rule gloabls added num_backtracking gloabl
+	shortened allocate_integer_pointer_array,
+	reallocate_integer_pointer_array
+
+1988-05-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* ecs.c: added RCS id added PROCFLG to avoid assumption of signed
+	char's
+
+1988-05-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: added RCS id added check_for_backtracking() added
+	dump_associated_rules() added dump_transitions() shortened
+	reallocate_integer_pointer_array to reallocate_int_ptr_array removed
+	some dfaacc_{state,set} abuses
+
+1988-05-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c: Added list_character_set()
+
+1988-05-07  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c: added RCS id
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: minor tweaks
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: forgot sh flex.shar
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* README: final tweaking
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* tblcmp.c: removed minor lint fluff
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS: [no log message]
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* NEWS, README: Initial revision
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* yylex.c: added identifying comment.  changed to include "parse.h"
+	instead of "y.tab.h"
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* tblcmp.c: Changed name from flexcmp.c -> tblcmp.c fixed misc.
+	typos made generating ec tables be a routine
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* sym.c: changed name from flexsym.c -> sym.c revamped calling
+	  sequences, etc., for extended table struct definition which now has
+	both char * and int fields.
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* scan.l: Changed name from flexscan.l -> scan.l fixed bug in
+	<RECOVER> added block comments between rules.
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* parse.y: changed name from flexparse.y -> parse.y added start
+	condition "INITIAL" made a{3} have "variable length"
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* nfa.c: changed name from flexnfa.c -> nfa.c corrected some typos.
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* misc.c: changed name from flexmisc.c -> misc.c
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* main.c: fixed bug causing core dumps if skeleton files could not
+	be opened.  Added -cF.  Added fullspd to be equivalent to fulltbl
+	   for which options is cannot be mixed with.
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* flexdef.h: fixed typos, enhanced symbol table definition.
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* ecs.c: changed name from flexecs.c to ecs.c
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* dfa.c: changed name from flexdfa.c to dfa.c
+
+1988-04-10  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c: changed name from flexccl.c -> ccl.c
+
+1988-02-13  Vern Paxson <vern@ee.lbl.gov>
+
+	* ccl.c, dfa.c, ecs.c, flexdef.h, main.c, misc.c, nfa.c, parse.y,
+	scan.l, sym.c, tblcmp.c, yylex.c: Beta Release.
+
+1987-11-08  Vern Paxson <vern@ee.lbl.gov>
+
+	* Initial revision
+
diff --git a/INSTALL b/INSTALL
new file mode 100644
index 0000000..2099840
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1,370 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
+Inc.
+
+   Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+   Briefly, the shell command `./configure && make && make install'
+should configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.  Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below.  The lack of an optional feature in a given package is not
+necessarily a bug.  More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+   The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.
+
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package, generally using the just-built uninstalled binaries.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.  When installing into a prefix owned by root, it is
+     recommended that the package be configured and built as a regular
+     user, and only the `make install' phase executed with root
+     privileges.
+
+  5. Optionally, type `make installcheck' to repeat any self-tests, but
+     this time using the binaries in their final installed location.
+     This target does not install anything.  Running this target as a
+     regular user, particularly if the prior `make install' required
+     root privileges, verifies that the installation completed
+     correctly.
+
+  6. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+  7. Often, you can also type `make uninstall' to remove the installed
+     files again.  In practice, not all packages have tested that
+     uninstallation works correctly, even though it is required by the
+     GNU Coding Standards.
+
+  8. Some packages, particularly those that use Automake, provide `make
+     distcheck', which can by used by developers to test that all other
+     targets like `make install' and `make uninstall' work correctly.
+     This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you can use GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.  This
+is known as a "VPATH" build.
+
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+   On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor.  Like
+this:
+
+     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CPP="gcc -E" CXXCPP="g++ -E"
+
+   This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+   By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.  In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+   The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+   The first method involves providing an override variable for each
+affected directory.  For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'.  Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated.  The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the `DESTDIR' variable.  For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names.  The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters.  On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+   Some packages offer the ability to configure how verbose the
+execution of `make' will be.  For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+   HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved.  Use GNU `make'
+instead.
+
+   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
+a workaround.  If GNU CC is not installed, it is therefore recommended
+to try
+
+     ./configure CC="cc"
+
+and if that doesn't work, try
+
+     ./configure CC="cc -nodtk"
+
+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+   On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'.  It is recommended to use the following options:
+
+     ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS
+     KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf limitation.  Until the limitation is lifted, you can use
+this workaround:
+
+     CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+     Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+     Print a summary of the options unique to this package's
+     `configure', and exit.  The `short' variant lists options used
+     only in the top level, while the `recursive' variant lists options
+     also present in any nested packages.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names::
+     for more details, including other options available for fine-tuning
+     the installation locations.
+
+`--no-create'
+`-n'
+     Run the configure checks, but stop before creating any output
+     files.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 0000000..fd8eb1a
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1,65 @@
+# This file is part of flex.
+
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+
+# Neither the name of the University nor the names of its contributors
+# may be used to endorse or promote products derived from this software
+# without specific prior written permission.
+
+# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE.
+
+# Notes on building:
+
+# Possible values for DEFS:
+#
+# By default, flex generates 8-bit scanners when using table compression,
+# and 7-bit scanners when using uncompressed tables (-f or -F options).
+# For flex to always generate 8-bit scanners, add "-DDEFAULT_CSIZE=256"
+# to DEFS.
+
+ACLOCAL_AMFLAGS = -I m4
+indent = @INDENT@
+
+dist_doc_DATA = \
+	AUTHORS \
+	COPYING \
+	NEWS \
+	ONEWS \
+	README
+
+EXTRA_DIST = \
+	.indent.pro \
+	autogen.sh
+
+SUBDIRS = \
+	lib \
+	src \
+	doc \
+	examples \
+	po \
+	tests \
+	tools
+
+# Create the ChangeLog, but only if we're inside a git working directory
+
+ChangeLog: $(srcdir)/tools/git2cl
+	if [ -d $(srcdir)/.git ] ; then \
+		$(srcdir)/tools/git2cl > $@ \
+	; fi
+
+install-exec-hook:
+	cd $(DESTDIR)$(bindir) && \
+		$(LN_S) -f flex$(EXEEXT) flex++$(EXEEXT)
+
+.PHONY: ChangeLog tags indent
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..c43c586
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,964 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# This file is part of flex.
+
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+
+# Neither the name of the University nor the names of its contributors
+# may be used to endorse or promote products derived from this software
+# without specific prior written permission.
+
+# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE.
+
+# Notes on building:
+
+# Possible values for DEFS:
+#
+# By default, flex generates 8-bit scanners when using table compression,
+# and 7-bit scanners when using uncompressed tables (-f or -F options).
+# For flex to always generate 8-bit scanners, add "-DDEFAULT_CSIZE=256"
+# to DEFS.
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
+	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(dist_doc_DATA) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(docdir)"
+DATA = $(dist_doc_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/compile \
+	$(top_srcdir)/build-aux/config.guess \
+	$(top_srcdir)/build-aux/config.rpath \
+	$(top_srcdir)/build-aux/config.sub \
+	$(top_srcdir)/build-aux/install-sh \
+	$(top_srcdir)/build-aux/ltmain.sh \
+	$(top_srcdir)/build-aux/missing ABOUT-NLS AUTHORS COPYING \
+	ChangeLog INSTALL NEWS README THANKS TODO build-aux/compile \
+	build-aux/config.guess build-aux/config.rpath \
+	build-aux/config.sub build-aux/install-sh build-aux/ltmain.sh \
+	build-aux/missing
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
+GZIP_ENV = --best
+DIST_TARGETS = dist-xz dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BISON = @BISON@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HELP2MAN = @HELP2MAN@
+INDENT = @INDENT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+M4 = @M4@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHARED_VERSION_INFO = @SHARED_VERSION_INFO@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TEXI2DVI = @TEXI2DVI@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ACLOCAL_AMFLAGS = -I m4
+indent = @INDENT@
+dist_doc_DATA = \
+	AUTHORS \
+	COPYING \
+	NEWS \
+	ONEWS \
+	README
+
+EXTRA_DIST = \
+	.indent.pro \
+	autogen.sh
+
+SUBDIRS = \
+	lib \
+	src \
+	doc \
+	examples \
+	po \
+	tests \
+	tools
+
+all: all-recursive
+
+.SUFFIXES:
+am--refresh: Makefile
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-dist_docDATA: $(dist_doc_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
+	done
+
+uninstall-dist_docDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+	@case `sed 15q $(srcdir)/NEWS` in \
+	*"$(VERSION)"*) : ;; \
+	*) \
+	  echo "NEWS not updated; not releasing" 1>&2; \
+	  exit 1;; \
+	esac
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__post_remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
+
+dist-tarZ: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__post_remove_distdir)
+
+dist-shar: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__post_remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__post_remove_distdir)
+
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__post_remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(docdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-dist_docDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+	@$(NORMAL_INSTALL)
+	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-dist_docDATA
+
+.MAKE: $(am__recursive_targets) install-am install-exec-am \
+	install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--refresh check check-am clean clean-cscope clean-generic \
+	clean-libtool cscope cscopelist-am ctags ctags-am dist \
+	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
+	dist-xz dist-zip distcheck distclean distclean-generic \
+	distclean-libtool distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am \
+	install-dist_docDATA install-dvi install-dvi-am install-exec \
+	install-exec-am install-exec-hook install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am uninstall-dist_docDATA
+
+.PRECIOUS: Makefile
+
+
+# Create the ChangeLog, but only if we're inside a git working directory
+
+ChangeLog: $(srcdir)/tools/git2cl
+	if [ -d $(srcdir)/.git ] ; then \
+		$(srcdir)/tools/git2cl > $@ \
+	; fi
+
+install-exec-hook:
+	cd $(DESTDIR)$(bindir) && \
+		$(LN_S) -f flex$(EXEEXT) flex++$(EXEEXT)
+
+.PHONY: ChangeLog tags indent
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/NEWS b/NEWS
new file mode 100644
index 0000000..2dce029
--- /dev/null
+++ b/NEWS
@@ -0,0 +1,608 @@
+This is the file NEWS for the flex package. It records user -visible
+changes between releases of flex.
+
+See the file COPYING for copying conditions.
+
+* version 2.6.1 released 2016-03-01
+
+** flex resources
+
+*** The flex project is now hosted at github. Consider this a "period of transition". In particular, you should start at https://github.com/westes/flex for the flex codebase, issue tracking and pull requests.
+
+*** New releases of flex are to be found at https://github.com/westes/flex/releases.
+
+** flex internals
+
+*** Flex now uses more modern and more standard names for variable types. There's more work to be done on that front yet, though.
+
+*** A number of compiler warnings have been remedied.
+
+*** Line directives should now  work as expected and be absent when that is expected.
+
+** test suite
+
+*** When running the test suite, c++ files are compiled with the c++ header inside the flex distribution, rather than relying on the build system's flex header , which might not be installed yet or which might be out of date with respect to what flex tests expect.
+
+*** Some portability fixes in the test suite such as opening files for reading in binary mode
+
+** Building flex
+
+*** The file src/scan.c asdistributed  with flex source is now built with the current version of flex. Occasionally this had to be done manually to pick up new flex features. It's now just a part of flex's build system.
+
+*** The pdf version of the manual is no longer distributed with flex, although if you have the texinfo package installed, you can still build it.
+
+*** lots of general build system cleanup
+
+*** the build system tries a bit harder to find libtoolize and texi2dvi.
+
+*** When help2man and texi2dvi are missing, the error messages are now much more helpful.
+
+** bug fixes
+
+*** resolved github issues #53, #54, #55, #61.
+
+*** Resolved sf bugs #128, #129, #155, #160, #184, #187, #195.
+
+* version 2.6.0 released 2015-11-17
+
+** User Visible Changes
+
+*** C++ scanners now use references instead of pointers. See the manual for details.
+
+*** A number of compiler warnings were addressed, so flex generated scanners should be quieter under compiler warning scenarios.
+
+*** Allow error reporting routines to accept varying number of arguments
+
+*** Removed deprecated 'register' storage class specifier
+
+*** Changeed output formats from octal to hexadecimal
+
+*** check limits before using array index cclp; resolves sf-166
+
+*** Suppress clang warning about empty @param paragraph; resolves sf#158
+
+*** Fixed malloc/realloc replacement, resolves sf bug#151.
+
+*** Adjusted buffer sizes on ia64.
+
+*** various documentation and code clean up fixes: resolves sf bugs #167, #168, among other patches.
+
+** Flex Internals
+
+*** flex is now organized into subdirectories. This keeps the tree neater at the top level and puts like things near each other and unlike things away from each other.
+
+*** The test suite has been reorganized and is now run with the parallel test suite harness from automake.
+
+*** Cleaned up the automake parts of the build system to better reflect what automake does on its own. Also added a call to libtoolize in autogen.sh because autoreconf gets confused without a prior run of libtoolize.
+
+*** po/Makefile now includes a rule to fetch the latest translations from the translation project. "make -f po/Makefile getpo" from the top level of the flex tree will fetch the files.
+
+*** New da translation from the translation project
+
+* flex version  2.5.39 released 2014-03-26
+
+** no user visible changes in this release
+
+* version 2.5.38 released 2014-02-14
+
+** internationalization
+
+*** add sr translation from the translation project
+
+*** update da, es, ko, nl, pt_BR, ro, ru, sv, tr, vi, zh_CN translations from the translation project
+
+*** rename zh_tw to its proper zh_TW name
+
+* version 2.5.37 released 2012-08-03
+
+** Import flex into git. See
+   git://flex.git.sourceforge.net/gitroot/flex/flex.
+
+** Fix make install target to not fail when the flex++ program is
+   already installed
+
+** New translations from the translation project: de, fi, pl, vi
+
+* version 2.5.36 released 2012-07-20
+
+** various portability fixes that quiet compiler warnings on 64-bit
+   hosts
+
+** various manual fixes, including correcting the name of a %option and
+   updating some simple examples to use ANSI C syntax
+
+** various bug fixes that prevent certain error conditions from
+   persisting when they should not persist
+
+** improvements to the test suite so it behaves better when linking
+   compiled files
+
+** new translations from the translation project: ca, da, es, fi, fr,
+   ga, ko, pt_br, ro, ru, sv, tr, zh_cn
+
+** the flex distribution is now built with automake 1.10.1 and automake
+   2.61
+
+* version 2.5.35 released 2008-02-26
+
+** fixed bug that prevented flex from accepting certain comments in the
+  scanner file (resolves bugs #1849809 and #1849805)
+
+** fix bug that prevented headers for all functions from being generated
+  (resolves bug #1628314)
+
+** change yy_size_t to be size_t (resolves bug #1849812)
+
+** new de, nl, pl, pt_br, vi translations from the translation project
+
+* version 2.5.34 released 2007-12-12
+
+** introduce yylex_init_extra; see the manual for details
+
+** introduce %option extra-type="your_type *" (resolves bug #1744505)
+
+** The flex program now parses multiple short concatenated options (resolves bug
+  #1619820). Thanks to Petr Machata of Red Hat on this issue.
+
+** better checking after yyalloc/yyrealloc (resolves bug #1595967)
+
+** flex now provides for a libfl_pic.a compiled with position
+   independent code. Particularly useful when including a flex scanner
+   in a shared library and with more recent versions of gcc. Thanks to the Debian project for the idea.
+
+** SourceForge feature request #1658379: Expose YY_BUF_SIZE in the
+	header file.
+
+** flex better escapes filenames with special characters in them
+   (resolves bug #1623600)
+
+** a memory leak was plugged(resolves bug #1601111)
+
+** pattern language expanded; see the manual for details on the below
+   highlights
+
+*** pattern options added to specify patterns as case-insensitive or
+    case-sensitive
+
+*** pattern options to specify whether the "." character should match
+    the newline character
+
+*** pattern options added to allow ignoring of whitespace in patterns
+
+*** POSIX character classes may be negated in patterns
+
+*** patterns may now use set difference, union operators
+
+** the manual now contains an appendix listing various common patterns
+   which may be useful when writing scanners
+
+** some memory leaks were removed from the C++ scanner (but the C++
+  scanner is still experimental and may change radically without
+  notice)
+
+** c++ scanners can now use yywrap
+
+** added new unit test for c++ and yywrap
+
+** portability fixes to some unit tests
+
+** flex man page and flex manual in pdf now distributed in the flex
+distribution
+
+** new ca, vi, ga, nl translations from the translation project
+
+** flex no longer comes with an rpm spec file
+
+** flex development now happens with automake 1.9.6
+
+* version 2.5.33 released 2006-2-20
+
+** all flex resources are now to be found from the website at
+   http://flex.sourceforge.net/
+
+** there was no release 2.5.32 published
+
+** numerous bug and security fixes
+
+** new nl, vi, sv, ro, po, ga, ca, fr, tr translations from the translation project
+
+** upgrade to use gettext 0.12 (this now makes the "pdf" and "ps"
+   targets in the build system able to be run successfully)
+
+* version 2.5.31 released 2003-4-1
+
+** remove --enable-maintainer-mode configure option; none of the
+   Makefiles were using it and it can be unduely confusing
+
+* version 2.5.30 released 2003-4-1
+
+** yylineno is per-buffer in reentrant scanners
+
+** added %top directive for placing code at the top of the generated
+   scanner; see manual for details
+
+** flex now uses m4 to generate scanners; while this means that
+   scanners are more readable, it means that flex requires m4 to be
+   installed; see manual for details
+
+* version 2.5.29 released 2003-3-5
+
+** Automatic stack management for multiple input buffers in C and C++ scanners
+
+** moved the flex documentation to a new doc/ subdirectory
+
+** cleanups to the yy namespace
+
+* version 2.5.28 released 2003-2-12
+
+** flex is now hosted at sourceforge
+
+** Fixed trailing slash bug in YY_INPUT macro def
+
+** Flex now warns if always-interactive is specified with fast or full
+
+* version 2.5.27 released 2003-1-21
+
+** flex now works with recent bison versions
+
+** new pt_br translation from the translation project
+
+* version 2.5.26 released 2003-1-14
+
+** Fixed table deserialization bug on big-endian archs. Patch sent from Bryce Nichols <bryce@bnichols.org>
+
+** yyleng has proper declarations now; this caused flex to generate
+   unusable scanners for some programs
+
+** the flex distribution now includes a spec file suitable for use
+   with rpm
+
+** some more c++ fixes
+
+** new es translation from the translation project
+
+** slight tweeks to the flex_int*_t types
+
+** flex now warns about pattern ranges that might be ambiguous when
+   generating a case-insensitive scanner
+
+
+* version 2.5.25 released 2002-12-2
+
+** flex now uses flex_int*_t types. For C99 systems, they are just the
+   int*_t types; for non-C99 systems, we just make some typedefs
+
+** new pt_br translation from the translation project
+
+* version 2.5.24 released 2002-11-25
+
+* more portability fixes
+
+** the manual continues to be updated and edited, but it's still got a
+   ways to go
+
+** it is possible to have multiple c++ scanners in the same program again
+
+** new turkish translation from the translation project
+
+* version 2.5.23 released 2002-10-21
+
+** more portability fixes
+
+** the manual includes a title page and a table-of-contents when printed
+
+** the test suite can be run with "make check" from the top-level
+   directory
+
+** configure now accepts the --enable-maintainer-mode option
+
+** gettext functionality is now only available externally
+
+** the constant FLEX_BETA is defined if flex is a beta release
+
+** the script create-test was not included in the distribution and it
+   should have been
+
+* version 2.5.22 released 2002-10-10
+
+** more portability fixes around how we get ahold of the integral
+   types; there is a constant FLEX_NEED_INTEGRAL_TYPE_DEFINITIONS
+   which you should define if you don't have the <inttypes.h> header
+   file (after you complain to your C vendor for not providing a
+   reasonable C environment)
+
+** more test suite cleanups; in particular, the test suite should run
+   correctly when build from a different directory
+
+** upgraded automake to 1.7 and consequently autoconf to 2.54; this
+   means, among other things, that there is some support for
+formatting the manual in postscript and pdf in the distributed
+   Makefile.in (and therefore in the Makefile built by configure)
+
+** the flex.1 manpage is generated by help2man; (this has been true
+   for quite a while but was not listed here)
+
+** flex now includes three defined constants to indicate which version
+  of flex generated a scanner (YY_FLEX_{MAJOR,MINOR,SUBMINOR}_VERSION)
+
+** flex tries its best to output only the relevant portions of the
+   skeleton when generating a scanner, thus avoiding as much
+   conditional compilation as possible
+
+* version 2.5.21 released 2002-9-17
+
+** one of the tests in the test suite broke the dist target
+
+* version 2.5.20 released 2002-9-16
+
+** A flex scanner has the ability to save the DFA tables to a file,
+   and load them at runtime when needed; see the manual for details
+
+** Added %option bison-bridge (--bison-bridge)
+
+** Removed %option reentrant-bison/--reentrant-bison/-Rb
+
+** yylineno is present in all scanners; Modified nasty performance
+   penalty warning with yylineno in documentation
+
+** test-table-opts is now run last in the test suite because it's so fat
+
+** flex can, to some extent, diagnose where internal problems occur
+
+** new translations from the translation project: fr, ca, de, ru, sv
+
+**Flex generates C99 defs now; see YY_TRADITIONAL_FUNC_DEFS in the
+  manual if that's not a good thing for you
+
+* version 2.5.19 released 2002-9-5
+
+** prevent segfault on input lines which are longer than the allocated
+   space (problem report from Manoj Srivastava
+   <srivasta@golden-gryphon.com>)
+
+** Changed option 'header' to 'header-file'
+
+* version 2.5.18 released 2002-9-4
+
+** portability fixes for integer constants and in the way the test
+   suite reports its results
+
+** the test for bison was reporting bison missing when it was, in
+   fact, found
+
+** if we don't find GNU indent, we're more careful when we're not
+   finding it
+
+* version 2.5.17 released 2002-8-29
+
+** more portability fixes
+
+** updated config.sub and config.guess
+
+** flex is indented by GNU indent (this was done earlier but not
+   explicitly documented)
+
+* version 2.5.16 released 2002-8-28
+
+** c++ scanners compile again
+
+** there is now an indent target in the top-level Makefile; configure
+   checks for GNU indent which is required for proper operation of the
+   indent target
+
+** some more portability fixes were made
+
+** %options and invocation sections of manual merged
+
+** a c++ test was added to the test suite
+
+** we're trying to clean up more files in the test suite's make clean
+   targets
+
+* version 2.5.15 released 2002-8-21
+
+** reject-state buffer is now dynamically allocated and REJECT buffer
+   variables are reentrant-safe
+
+** manual now discusses memory usage
+
+** skeleton now processed by m4 before mkskel.sh; (this only matters
+   if you want to change the skeleton or if you're doing flex development)
+
+** zh_cn translation added from translation project
+
+** a bug that caused a segfault has now been fixed
+
+** the test suite now respects the usual CFLAGS, etc. variables
+
+** removed some warnings which some tests trigggered with the -s option
+
+** the flex-generated header file now tries to be smarter about
+   conditionally including start conditions
+
+** tables code omitted from generated scanner when not used
+
+* version 2.5.14 released 2002-8-15
+
+** the tests using the reentrant c scanner as c++ were reworked
+   slightly to be sure that the c++ was enforced
+
+** de translation now included in the distribution
+
+** various portability fixes regarding nls support, c++ include
+   headers, etc.
+
+* version 2.5.13 released 2002-8-15
+
+** the header file output with %option header is now much smaller
+
+** Fixed type mismatch in printf in scanner skeleton
+
+** yylex_init now reports errors
+
+* version 2.5.12 released 2002-8-8
+
+** updated gettext support to 0.11.5
+
+** new fr translation from the translation project
+
+** bison is no longer needed to build flex; If you are building flex
+   from a release (i.e., not from a cvs snapshot), then you don't need
+   to have a pre-built lex around either (unless you modify scan.l, of
+   course); (This has been true for some time, but was not mentioned
+   here.)
+
+* version 2.5.11 released 2002-7-31
+
+** Fixed bug where yyless did not consider yylineno
+
+** the yylineno performance hit is now gone
+
+** fixed some typos in the manual and we now include texinfo.tex in
+   the distribution
+
+** traditional prototypes output for C scanners, controlled by a
+   preprocessor symbol; see documentation for details
+
+* version 2.5.10 released 2002-7-24
+
+** yy_globals renamed to yyscanner and yy_globals_t renamed to
+   yy_guts_t
+
+** added dist-bzip2 option to Makefile.am so we now produce a bzip2'd
+   archive in addition to the standard gzip archive
+
+*  version 2.5.9
+
+** new tests in test suite: test-mem-{nr,r}, test-posix,
+   test-posixly-correct, test-debug-{nr,r}
+
+** made changes to work with gcc-3.2 development code
+
+** ability to choose which memory functions are used in flex
+
+** new yylex_destroy() function for the non-reentrant scanner
+
+** new handling of POSIXLY_CORRECT environment variable
+
+** the test suite now has its copyrights explicitly described
+
+** new ca, de, fr, ru, sv, tr translations
+
+* version 2.5.8
+
+** a new --posix option generates scanners with posix-style abc{1,3}
+   compatible parsing, see manual for the screwy details
+
+* version 2.5.7
+
+** configure.in now includes a call to AC_PREREQ to enforce the
+   requirement for autoconf at least 2.50 (This only effects you if
+   you're doing flex development.)
+
+** configure now uses autoconf's versioning information and configure
+   --help reports the bug-reporting address for flex
+
+** test suite now only reports success versus failure; reporting
+   skipped is problematic under the current setup
+
+** compilation with --disable-nls now works
+
+** flex can now be built in a separate directory
+
+* version 2.5.6
+
+** gettext support added (from gettext 0.11)
+
+*** translations for ca, da, de, es, fr, ko, ru, sv, tr included
+
+** distribution now built under automake 1.6 and autoconf 2.53
+
+** command-line option parsing happens differently now:
+
+*** Added long option parsing
+
+*** Options -n and -c, previously deprecated, now simply do nothing
+
+*** Options are now parsed left to right
+
+** added a number of new options
+
+*** All positive %options are now accessible from the command line
+
+*** Added option -D, to define a preprocessor symbol
+
+*** Added option --header=FILE to specify a C .h file to generate
+
+*** added option --yywrap to call yywrap on EOF
+
+*** added option --yylineno to track line count in yylineno
+
+*** --yyclass=NAME name of C++ class when generating c++ scanners
+
+*** for long option names which are associated with existing short
+options, see accompanying documentation
+
+*** new %option nounistd or command-line --nounistd added to prevent
+    flex from generating #include <unistd.h> on systems that don't
+    have that include file
+
+** Support for reentrant C scanners has been added
+
+*** Updated the manual with the new reentrant API
+
+*** Two new options %option reentrant (-R) and 
+%option reentrant-bison (-Rb)
+
+*** All globals optionally placed into struct yyglobals_t
+
+*** All access to globals replaced by macro invocations
+
+*** All functions optionally take one additional
+argument, yy_globals
+
+*** New style for invoking reentrant scanner:
+yylex_init(void** scanner );
+yylex( scanner );
+yylex_destroy( scanner );
+
+*** Added get/set functions for members of struct yy_globals_t
+e.g.,  yyget_text, yyget_leng, etc
+
+*** Prefix substitution added for new functions
+
+*** Macro shortcuts to the lengthy get/set functions
+provided for use in actions, e.g.,  yytext, yyleng, etc
+
+*** Arbitrary, user-defined data, "yyextra", may be added to scanner
+
+** %option nomain no longer implies %option yywrap
+But the inverse is still true
+
+** Developer test suite added
+
+*** TESTS/ directory has been added. Users can 
+'make test' in the TESTS directory to execute the test suite
+
+** Support for bison variables yylval and yylloc added
+
+** automake support for the build process
+
+** manual is now in texinfo/info format
+
+*** flex.1 removed from distribution
+
+** flex no longer generates C-language scanners with C++-style
+   comments
+
+** flex now generates scanners in c++ which are compatible with
+   recent c++ compilers
+
+** flex input scanner now recognizes '\r' as an EOL character
+
+See the file ONEWS for changes in earlier releases.
+
+Local Variables:
+mode: text
+mode: outline-minor
+end:
diff --git a/ONEWS b/ONEWS
new file mode 100644
index 0000000..3341577
--- /dev/null
+++ b/ONEWS
@@ -0,0 +1,1233 @@
+Changes between release 2.5.4 (11Sep96) and release 2.5.3:
+
+	- Fixed a bug introduced in 2.5.3 that blew it when a call
+	  to input() occurred at the end of an input file.
+
+	- Fixed scanner skeleton so the example in the man page of
+	  scanning strings using exclusive start conditions works.
+
+	- Minor Makefile tweaks.
+
+
+Changes between release 2.5.3 (29May96) and release 2.5.2:
+
+	- Some serious bugs in yymore() have been fixed.  In particular,
+	  when using AT&T-lex-compatibility or %array, you can intermix
+	  calls to input(), unput(), and yymore().  (This still doesn't
+	  work for %pointer, and isn't likely to in the future.)
+
+	- A bug in handling NUL's in the input stream of scanners using
+	  REJECT has been fixed.
+
+	- The default main() in libfl.a now repeatedly calls yylex() until
+	  it returns 0, rather than just calling it once.
+
+	- Minor tweak for Windows NT Makefile, MISC/NT/Makefile.
+
+
+Changes between release 2.5.2 (25Apr95) and release 2.5.1:
+
+	- The --prefix configuration option now works.
+
+	- A bug that completely broke the "-Cf" table compression
+	  option has been fixed.
+
+	- A major headache involving "const" declarators and Solaris
+	  systems has been fixed.
+
+	- An octal escape sequence in a flex regular expression must
+	  now contain only the digits 0-7.
+
+	- You can now use "--" on the flex command line to mark the
+	  end of flex options.
+
+	- You can now specify the filename '-' as a synonym for stdin.
+
+	- By default, the scanners generated by flex no longer
+	  statically initialize yyin and yyout to stdin and stdout.
+	  This change is necessary because in some ANSI environments,
+	  stdin and stdout are not compile-time constant.  You can
+	  force the initialization using "%option stdinit" in the first
+	  section of your flex input.
+
+	- "%option nounput" now correctly omits the unput() routine
+	  from the output.
+
+	- "make clean" now removes config.log, config.cache, and the
+	  flex binary.  The fact that it removes the flex binary means
+	  you should take care if making changes to scan.l, to make
+	  sure you don't wind up in a bootstrap problem.
+
+	- In general, the Makefile has been reworked somewhat (thanks
+	  to Francois Pinard) for added flexibility - more changes will
+	  follow in subsequent releases.
+
+	- The .texi and .info files in MISC/texinfo/ have been updated,
+	  thanks also to Francois Pinard.
+
+	- The FlexLexer::yylex(istream* new_in, ostream* new_out) method
+	  now does not have a default for the first argument, to disambiguate
+	  it from FlexLexer::yylex().
+
+	- A bug in destructing a FlexLexer object before doing any scanning
+	  with it has been fixed.
+
+	- A problem with including FlexLexer.h multiple times has been fixed.
+
+	- The alloca() chud necessary to accommodate bison has grown
+	  even uglier, but hopefully more correct.
+
+	- A portability tweak has been added to accommodate compilers that
+	  use char* generic pointers.
+
+	- EBCDIC contact information in the file MISC/EBCDIC has been updated.
+
+	- An OS/2 Makefile and config.h for flex 2.5 is now available in
+	  MISC/OS2/, contributed by Kai Uwe Rommel.
+
+	- The descrip.mms file for building flex under VMS has been updated,
+	  thanks to Pat Rankin.
+
+	- The notes on building flex for the Amiga have been updated for
+	  flex 2.5, contributed by Andreas Scherer.
+
+
+Changes between release 2.5.1 (28Mar95) and release 2.4.7:
+
+	- A new concept of "start condition" scope has been introduced.
+	  A start condition scope is begun with:
+
+		<SCs>{
+
+	  where SCs is a list of one or more start conditions.  Inside
+	  the start condition scope, every rule automatically has the
+	  prefix <SCs> applied to it, until a '}' which matches the
+	  initial '{'.  So, for example:
+
+		<ESC>{
+			"\\n"	return '\n';
+			"\\r"	return '\r';
+			"\\f"	return '\f';
+			"\\0"	return '\0';
+		}
+
+	  is equivalent to:
+
+		<ESC>"\\n"	return '\n';
+		<ESC>"\\r"	return '\r';
+		<ESC>"\\f"	return '\f';
+		<ESC>"\\0"	return '\0';
+
+	  As indicated in this example, rules inside start condition scopes
+	  (and any rule, actually, other than the first) can be indented,
+	  to better show the extent of the scope.
+
+	  Start condition scopes may be nested.
+
+	- The new %option directive can be used in the first section of
+	  a flex scanner to control scanner-generation options.  Most
+	  options are given simply as names, optionally preceded by the
+	  word "no" (with no intervening whitespace) to negate their
+	  meaning.  Some are equivalent to flex flags, so putting them
+	  in your scanner source is equivalent to always specifying
+	  the flag (%option's take precedence over flags):
+
+		7bit	-7 option
+		8bit	-8 option
+		align	-Ca option
+		backup	-b option
+		batch	-B option
+		c++	-+ option
+		caseful	opposite of -i option (caseful is the default);
+		case-sensitive	same as above
+		caseless	-i option;
+		case-insensitive	same as above
+		debug	-d option
+		default	opposite of -s option
+		ecs	-Ce option
+		fast	-F option
+		full	-f option
+		interactive	-I option
+		lex-compat	-l option
+		meta-ecs	-Cm option
+		perf-report	-p option
+		read	-Cr option
+		stdout	-t option
+		verbose	-v option
+		warn	opposite of -w option (so use "%option nowarn" for -w)
+
+		array	equivalent to "%array"
+		pointer	equivalent to "%pointer" (default)
+
+	  Some provide new features:
+
+		always-interactive	generate a scanner which always
+			considers its input "interactive" (no call to isatty()
+			will be made when the scanner runs)
+		main	supply a main program for the scanner, which
+			simply calls yylex().  Implies %option noyywrap.
+		never-interactive	generate a scanner which never
+			considers its input "interactive" (no call to isatty()
+			will be made when the scanner runs)
+		stack	if set, enable start condition stacks (see below)
+		stdinit	if unset ("%option nostdinit"), initialize yyin
+			and yyout statically to nil FILE* pointers, instead
+			of stdin and stdout
+		yylineno	if set, keep track of the current line
+			number in global yylineno (this option is expensive
+			in terms of performance).  The line number is available
+			to C++ scanning objects via the new member function
+			lineno().
+		yywrap	if unset ("%option noyywrap"), scanner does not
+			call yywrap() upon EOF but simply assumes there
+			are no more files to scan
+
+	  Flex scans your rule actions to determine whether you use the
+	  REJECT or yymore features (this is not new).  Two %options can be
+	  used to override its decision, either by setting them to indicate
+	  the feature is indeed used, or unsetting them to indicate it
+	  actually is not used:
+
+		reject
+		yymore
+
+	  Three %option's take string-delimited values, offset with '=':
+
+		outfile="<name>"	equivalent to -o<name>
+		prefix="<name>"		equivalent to -P<name>
+		yyclass="<name>"	set the name of the C++ scanning class
+					(see below)
+
+	  A number of %option's are available for lint purists who
+	  want to suppress the appearance of unneeded routines in
+	  the generated scanner.  Each of the following, if unset,
+	  results in the corresponding routine not appearing in the
+	  generated scanner:
+
+		input, unput
+		yy_push_state, yy_pop_state, yy_top_state
+		yy_scan_buffer, yy_scan_bytes, yy_scan_string
+
+	  You can specify multiple options with a single %option directive,
+	  and multiple directives in the first section of your flex input file.
+
+	- The new function:
+
+		YY_BUFFER_STATE yy_scan_string( const char *str )
+
+	  returns a YY_BUFFER_STATE (which also becomes the current input
+	  buffer) for scanning the given string, which occurs starting
+	  with the next call to yylex().  The string must be NUL-terminated.
+	  A related function:
+
+		YY_BUFFER_STATE yy_scan_bytes( const char *bytes, int len )
+
+	  creates a buffer for scanning "len" bytes (including possibly NUL's)
+	  starting at location "bytes".
+
+	  Note that both of these functions create and scan a *copy* of
+	  the string/bytes.  (This may be desirable, since yylex() modifies
+	  the contents of the buffer it is scanning.)  You can avoid the
+	  copy by using:
+
+		YY_BUFFER_STATE yy_scan_buffer( char *base, yy_size_t size )
+
+	  which scans in place the buffer starting at "base", consisting
+	  of "size" bytes, the last two bytes of which *must* be
+	  YY_END_OF_BUFFER_CHAR (these bytes are not scanned; thus, scanning
+	  consists of base[0] through base[size-2], inclusive).  If you
+	  fail to set up "base" in this manner, yy_scan_buffer returns a
+	  nil pointer instead of creating a new input buffer.
+
+	  The type yy_size_t is an integral type to which you can cast
+	  an integer expression reflecting the size of the buffer.
+
+	- Three new routines are available for manipulating stacks of
+	  start conditions:
+
+		void yy_push_state( int new_state )
+
+	  pushes the current start condition onto the top of the stack
+	  and BEGIN's "new_state" (recall that start condition names are
+	  also integers).
+
+		void yy_pop_state()
+
+	  pops the top of the stack and BEGIN's to it, and
+
+		int yy_top_state()
+
+	  returns the top of the stack without altering the stack's
+	  contents.
+
+	  The start condition stack grows dynamically and so has no built-in
+	  size limitation.  If memory is exhausted, program execution
+	  is aborted.
+
+	  To use start condition stacks, your scanner must include
+	  a "%option stack" directive.
+
+	- flex now supports POSIX character class expressions.  These
+	  are expressions enclosed inside "[:" and ":]" delimiters (which
+	  themselves must appear between the '[' and ']' of a character
+	  class; other elements may occur inside the character class, too).
+	  The expressions flex recognizes are:
+
+		[:alnum:] [:alpha:] [:blank:] [:cntrl:] [:digit:] [:graph:]	
+		[:lower:] [:print:] [:punct:] [:space:] [:upper:] [:xdigit:]
+
+	  These expressions all designate a set of characters equivalent to
+	  the corresponding isXXX function (for example, [:alnum:] designates
+	  those characters for which isalnum() returns true - i.e., any
+	  alphabetic or numeric).  Some systems don't provide isblank(),
+	  so flex defines [:blank:] as a blank or a tab.
+
+	  For example, the following character classes are all equivalent:
+
+		[[:alnum:]]
+		[[:alpha:][:digit:]
+		[[:alpha:]0-9]
+		[a-zA-Z0-9]
+
+	  If your scanner is case-insensitive (-i flag), then [:upper:]
+	  and [:lower:] are equivalent to [:alpha:].
+
+	- The promised rewrite of the C++ FlexLexer class has not yet
+	  been done.  Support for FlexLexer is limited at the moment to
+	  fixing show-stopper bugs, so, for example, the new functions
+	  yy_scan_string() & friends are not available to FlexLexer
+	  objects.
+
+	- The new macro
+
+		yy_set_interactive(is_interactive)
+
+	  can be used to control whether the current buffer is considered
+	  "interactive".  An interactive buffer is processed more slowly,
+	  but must be used when the scanner's input source is indeed
+	  interactive to avoid problems due to waiting to fill buffers
+	  (see the discussion of the -I flag in flex.1).  A non-zero value
+	  in the macro invocation marks the buffer as interactive, a zero
+	  value as non-interactive.  Note that use of this macro overrides
+	  "%option always-interactive" or "%option never-interactive".
+
+	  yy_set_interactive() must be invoked prior to beginning to
+	  scan the buffer.
+
+	- The new macro
+
+		yy_set_bol(at_bol)
+
+	  can be used to control whether the current buffer's scanning
+	  context for the next token match is done as though at the
+	  beginning of a line (non-zero macro argument; makes '^' anchored
+	  rules active) or not at the beginning of a line (zero argument,
+	  '^' rules inactive).
+
+	- Related to this change, the mechanism for determining when a scan is
+	  starting at the beginning of a line has changed.  It used to be
+	  that '^' was active iff the character prior to that at which the
+	  scan started was a newline.  The mechanism now is that '^' is
+	  active iff the last token ended in a newline (or the last call to
+	  input() returned a newline).  For most users, the difference in
+	  mechanisms is negligible.  Where it will make a difference,
+	  however, is if unput() or yyless() is used to alter the input
+	  stream.  When in doubt, use yy_set_bol().
+
+	- The new beginning-of-line mechanism involved changing some fairly
+	  twisted code, so it may have introduced bugs - beware ...
+
+	- The macro YY_AT_BOL() returns true if the next token scanned from
+	  the current buffer will have '^' rules active, false otherwise.
+
+	- The new function
+
+		void yy_flush_buffer( struct yy_buffer_state* b )
+
+	  flushes the contents of the current buffer (i.e., next time
+	  the scanner attempts to match a token using b as the current
+	  buffer, it will begin by invoking YY_INPUT to fill the buffer).
+	  This routine is also available to C++ scanners (unlike some
+	  of the other new routines).
+
+	  The related macro
+
+		YY_FLUSH_BUFFER
+
+	  flushes the contents of the current buffer.
+
+	- A new "-ooutput" option writes the generated scanner to "output".
+	  If used with -t, the scanner is still written to stdout, but
+	  its internal #line directives (see previous item) use "output".
+
+	- Flex now generates #line directives relating the code it
+	  produces to the output file; this means that error messages
+	  in the flex-generated code should be correctly pinpointed.
+
+	- When generating #line directives, filenames with embedded '\'s
+	  have those characters escaped (i.e., turned into '\\').  This
+	  feature helps with reporting filenames for some MS-DOS and OS/2
+	  systems.
+
+	- The FlexLexer class includes two new public member functions:
+
+		virtual void switch_streams( istream* new_in = 0,
+						ostream* new_out = 0 )
+
+	  reassigns yyin to new_in (if non-nil) and yyout to new_out
+	  (ditto), deleting the previous input buffer if yyin is
+	  reassigned.  It is used by:
+
+		int yylex( istream* new_in = 0, ostream* new_out = 0 )
+
+	  which first calls switch_streams() and then returns the value
+	  of calling yylex().
+
+	- C++ scanners now have yy_flex_debug as a member variable of
+	  FlexLexer rather than a global, and member functions for testing
+	  and setting it.
+
+	- When generating a C++ scanning class, you can now use
+
+		%option yyclass="foo"
+
+	  to inform flex that you have derived "foo" as a subclass of
+	  yyFlexLexer, so flex will place your actions in the member
+	  function foo::yylex() instead of yyFlexLexer::yylex().  It also
+	  generates a yyFlexLexer::yylex() member function that generates a
+	  run-time error if called (by invoking yyFlexLexer::LexerError()).
+	  This feature is necessary if your subclass "foo" introduces some
+	  additional member functions or variables that you need to access
+	  from yylex().
+
+	- Current texinfo files in MISC/texinfo, contributed by Francois
+	  Pinard.
+
+	- You can now change the name "flex" to something else (e.g., "lex")
+	  by redefining $(FLEX) in the Makefile.
+
+	- Two bugs (one serious) that could cause "bigcheck" to fail have
+	  been fixed.
+
+	- A number of portability/configuration changes have been made
+	  for easier portability.
+
+	- You can use "YYSTATE" in your scanner as an alias for YY_START
+	  (for AT&T lex compatibility).
+
+	- input() now maintains yylineno.
+
+	- input() no longer trashes yytext.
+
+	- interactive scanners now read characters in YY_INPUT up to a
+	  newline, a large performance gain.
+
+	- C++ scanner objects now work with the -P option.  You include
+	  <FlexLexer.h> once per scanner - see comments in <FlexLexer.h>
+	  (or flex.1) for details.
+
+	- C++ FlexLexer objects now use the "cerr" stream to report -d output
+	  instead of stdio.
+
+	- The -c flag now has its full glorious POSIX interpretation (do
+	  nothing), rather than being interpreted as an old-style -C flag.
+
+	- Scanners generated by flex now include two #define's giving
+	  the major and minor version numbers (YY_FLEX_MAJOR_VERSION,
+	  YY_FLEX_MINOR_VERSION).  These can then be tested to see
+	  whether certain flex features are available.
+
+	- Scanners generated using -l lex compatibility now have the symbol
+	  YY_FLEX_LEX_COMPAT #define'd.
+
+	- When initializing (i.e., yy_init is non-zero on entry to yylex()),
+	  generated scanners now set yy_init to zero before executing
+	  YY_USER_INIT.  This means that you can set yy_init back to a
+	  non-zero value in YY_USER_INIT if you need the scanner to be
+	  reinitialized on the next call.
+
+	- You can now use "#line" directives in the first section of your
+	  scanner specification.
+
+	- When generating full-table scanners (-Cf), flex now puts braces
+	  around each row of the 2-d array initialization, to silence warnings
+	  on over-zealous compilers.
+
+	- Improved support for MS-DOS.  The flex sources have been successfully
+	  built, unmodified, for Borland 4.02 (all that's required is a
+	  Borland Makefile and config.h file, which are supplied in
+	  MISC/Borland - contributed by Terrence O Kane).
+
+	- Improved support for Macintosh using Think C - the sources should
+	  build for this platform "out of the box".  Contributed by Scott
+	  Hofmann.
+
+	- Improved support for VMS, in MISC/VMS/, contributed by Pat Rankin.
+
+	- Support for the Amiga, in MISC/Amiga/, contributed by Andreas
+	  Scherer.  Note that the contributed files were developed for
+	  flex 2.4 and have not been tested with flex 2.5.
+
+	- Some notes on support for the NeXT, in MISC/NeXT, contributed
+	  by Raf Schietekat.
+
+	- The MISC/ directory now includes a preformatted version of flex.1
+	  in flex.man, and pre-yacc'd versions of parse.y in parse.{c,h}.
+
+	- The flex.1 and flexdoc.1 manual pages have been merged.  There
+	  is now just one document, flex.1, which includes an overview
+	  at the beginning to help you find the section you need.
+
+	- Documentation now clarifies that start conditions persist across
+	  switches to new input files or different input buffers.  If you
+	  want to e.g., return to INITIAL, you must explicitly do so.
+
+	- The "Performance Considerations" section of the manual has been
+	  updated.
+
+	- Documented the "yy_act" variable, which when YY_USER_ACTION is
+	  invoked holds the number of the matched rule, and added an
+	  example of using yy_act to profile how often each rule is matched.
+
+	- Added YY_NUM_RULES, a definition that gives the total number
+	  of rules in the file, including the default rule (even if you
+	  use -s).
+
+	- Documentation now clarifies that you can pass a nil FILE* pointer
+	  to yy_create_buffer() or yyrestart() if you've arrange YY_INPUT
+	  to not need yyin.
+
+	- Documentation now clarifies that YY_BUFFER_STATE is a pointer to
+	  an opaque "struct yy_buffer_state".
+
+	- Documentation now stresses that you gain the benefits of removing
+	  backing-up states only if you remove *all* of them.
+
+	- Documentation now points out that traditional lex allows you
+	  to put the action on a separate line from the rule pattern if
+	  the pattern has trailing whitespace (ugh!), but flex doesn't
+	  support this.
+
+	- A broken example in documentation of the difference between
+	  inclusive and exclusive start conditions is now fixed.
+
+	- Usage (-h) report now goes to stdout.
+
+	- Version (-V) info now goes to stdout.
+
+	- More #ifdef chud has been added to the parser in attempt to
+	  deal with bison's use of alloca().
+
+	- "make clean" no longer deletes emacs backup files (*~).
+
+	- Some memory leaks have been fixed.
+
+	- A bug was fixed in which dynamically-expanded buffers were
+	  reallocated a couple of bytes too small.
+
+	- A bug was fixed which could cause flex to read and write beyond
+	  the end of the input buffer.
+
+	- -S will not be going away.
+
+
+Changes between release 2.4.7 (03Aug94) and release 2.4.6:
+
+	- Fixed serious bug in reading multiple files.
+
+	- Fixed bug in scanning NUL's.
+
+	- Fixed bug in input() returning 8-bit characters.
+
+	- Fixed bug in matching text with embedded NUL's when
+	  using %array or lex compatibility.
+
+	- Fixed multiple invocations of YY_USER_ACTION when using '|'
+	  continuation action.
+
+	- Minor prototyping fixes.
+
+Changes between release 2.4.6 (04Jan94) and release 2.4.5:
+
+	- Linking with -lfl no longer required if your program includes
+	  its own yywrap() and main() functions.  (This change will cause
+	  problems if you have a non-ANSI compiler on a system for which
+	  sizeof(int) != sizeof(void*) or sizeof(int) != sizeof(size_t).)
+
+	- The use of 'extern "C++"' in FlexLexer.h has been modified to
+	  get around an incompatibility with g++'s header files.
+
+Changes between release 2.4.5 (11Dec93) and release 2.4.4:
+
+	- Fixed bug breaking C++ scanners that use REJECT or variable
+	  trailing context.
+
+	- Fixed serious input problem for interactive scanners on
+	  systems for which char is unsigned.
+
+	- Fixed bug in incorrectly treating '$' operator as variable
+	  trailing context.
+
+	- Fixed bug in -CF table representation that could lead to
+	  corrupt tables.
+
+	- Fixed fairly benign memory leak.
+
+	- Added `extern "C++"' wrapper to FlexLexer.h header.  This
+	  should overcome the g++ 2.5.X problems mentioned in the
+	  NEWS for release 2.4.3.
+
+	- Changed #include of FlexLexer.h to use <> instead of "".
+
+	- Added feature to control whether the scanner attempts to
+	  refill the input buffer once it's exhausted.  This feature
+	  will be documented in the 2.5 release.
+
+
+Changes between release 2.4.4 (07Dec93) and release 2.4.3:
+
+	- Fixed two serious bugs in scanning 8-bit characters.
+
+	- Fixed bug in YY_USER_ACTION that caused it to be executed
+	  inappropriately (on the scanner's own internal actions, and
+	  with incorrect yytext/yyleng values).
+
+	- Fixed bug in pointing yyin at a new file and resuming scanning.
+
+	- Portability fix regarding min/max/abs macros conflicting with
+	  function definitions in standard header files.
+
+	- Added a virtual LexerError() method to the C++ yyFlexLexer class
+	  for reporting error messages instead of always using cerr.
+
+	- Added warning in flexdoc that the C++ scanning class is presently
+	  experimental and subject to considerable change between major
+	  releases.
+
+
+Changes between release 2.4.3 (03Dec93) and release 2.4.2:
+
+	- Fixed bug causing fatal scanner messages to fail to print.
+
+	- Fixed things so FlexLexer.h can be included in other C++
+	  sources.  One side-effect of this change is that -+ and -CF
+	  are now incompatible.
+
+	- libfl.a now supplies private versions of the the <string.h>/
+	  <strings.h> string routines needed by flex and the scanners
+	  it generates, to enhance portability to some BSD systems.
+
+	- More robust solution to 2.4.2's flexfatal() bug fix.
+
+	- Added ranlib of installed libfl.a.
+
+	- Some lint tweaks.
+
+	- NOTE: problems have been encountered attempting to build flex
+	  C++ scanners using g++ version 2.5.X.  The problem is due to an
+	  unfortunate heuristic in g++ 2.5.X that attempts to discern between
+	  C and C++ headers.  Because FlexLexer.h is installed (by default)
+	  in /usr/local/include and not /usr/local/lib/g++-include, g++ 2.5.X
+	  decides that it's a C header :-(.  So if you have problems, install
+	  the header in /usr/local/lib/g++-include instead.
+
+
+Changes between release 2.4.2 (01Dec93) and release 2.4.1:
+
+	- Fixed bug in libfl.a referring to non-existent "flexfatal" function.
+
+	- Modified to produce both compress'd and gzip'd tar files for
+	  distributions (you probably don't care about this change!).
+
+
+Changes between release 2.4.1 (30Nov93) and release 2.3.8:
+
+	- The new '-+' flag instructs flex to generate a C++ scanner class
+	  (thanks to Kent Williams).  flex writes an implementation of the
+	  class defined in FlexLexer.h to lex.yy.cc.  You may include
+	  multiple scanner classes in your program using the -P flag.  Note
+	  that the scanner class also provides a mechanism for creating
+	  reentrant scanners.  The scanner class uses C++ streams for I/O
+	  instead of FILE*'s (thanks to Tom Epperly).  If the flex executable's
+	  name ends in '+' then the '-+' flag is automatically on, so creating
+	  a symlink or copy of "flex" to "flex++" results in a version of
+	  flex that can be used exclusively for C++ scanners.
+
+	  Note that without the '-+' flag, flex-generated scanners can still
+	  be compiled using C++ compilers, though they use FILE*'s for I/O
+	  instead of streams.
+
+	  See the "GENERATING C++ SCANNERS" section of flexdoc for details.
+
+	- The new '-l' flag turns on maximum AT&T lex compatibility.  In
+	  particular, -l includes support for "yylineno" and makes yytext
+	  be an array instead of a pointer.  It does not, however, do away
+	  with all incompatibilities.  See the "INCOMPATIBILITIES WITH LEX
+	  AND POSIX" section of flexdoc for details.
+
+	- The new '-P' option specifies a prefix to use other than "yy"
+	  for the scanner's globally-visible variables, and for the
+	  "lex.yy.c" filename.  Using -P you can link together multiple
+	  flex scanners in the same executable.
+
+	- The distribution includes a "texinfo" version of flexdoc.1,
+	  contributed by Roland Pesch (thanks also to Marq Kole, who
+	  contributed another version).  It has not been brought up to
+	  date, but reflects version 2.3.  See MISC/flex.texinfo.
+
+	  The flex distribution will soon include G.T. Nicol's flex
+	  manual; he is presently bringing it up-to-date for version 2.4.
+
+	- yywrap() is now a function, and you now *must* link flex scanners
+	  with libfl.a.
+
+	- Site-configuration is now done via an autoconf-generated
+	  "configure" script contributed by Francois Pinard.
+
+	- Scanners now use fread() (or getc(), if interactive) and not
+	  read() for input.  A new "table compression" option, -Cr,
+	  overrides this change and causes the scanner to use read()
+	  (because read() is a bit faster than fread()).  -f and -F
+	  are now equivalent to -Cfr and -CFr; i.e., they imply the
+	  -Cr option.
+
+	- In the blessed name of POSIX compliance, flex supports "%array"
+	  and "%pointer" directives in the definitions (first) section of
+	  the scanner specification.  The former specifies that yytext
+	  should be an array (of size YYLMAX), the latter, that it should
+	  be a pointer.  The array version of yytext is universally slower
+	  than the pointer version, but has the advantage that its contents
+	  remain unmodified across calls to input() and unput() (the pointer
+	  version of yytext is, still, trashed by such calls).
+
+	  "%array" cannot be used with the '-+' C++ scanner class option.
+
+	- The new '-Ca' option directs flex to trade off memory for
+	  natural alignment when generating a scanner's tables.  In
+	  particular, table entries that would otherwise be "short"
+	  become "long".
+
+	- The new '-h' option produces a summary of the flex flags.
+
+	- The new '-V' option reports the flex version number and exits.
+
+	- The new scanner macro YY_START returns an integer value
+	  corresponding to the current start condition.  You can return
+	  to that start condition by passing the value to a subsequent
+	  "BEGIN" action.  You also can implement "start condition stacks"
+	  by storing the values in an integer stack.
+
+	- You can now redefine macros such as YY_INPUT by just #define'ing
+	  them to some other value in the first section of the flex input;
+	  no need to first #undef them.
+
+	- flex now generates warnings for rules that can't be matched.
+	  These warnings can be turned off using the new '-w' flag.  If
+	  your scanner uses REJECT then you will not get these warnings.
+
+	- If you specify the '-s' flag but the default rule can be matched,
+	  flex now generates a warning.
+
+	- "yyleng" is now a global, and may be modified by the user (though
+	  doing so and then using yymore() will yield weird results).
+
+	- Name definitions in the first section of a scanner specification
+	  can now include a leading '^' or trailing '$' operator.  In this
+	  case, the definition is *not* pushed back inside of parentheses.
+
+	- Scanners with compressed tables are now "interactive" (-I option)
+	  by default.  You can suppress this attribute (which makes them
+	  run slightly slower) using the new '-B' flag.
+
+	- Flex now generates 8-bit scanners by default, unless you use the
+	  -Cf or -CF compression options (-Cfe  and -CFe result in 8-bit
+	  scanners).  You can force it to generate a 7-bit scanner using
+	  the new '-7' flag.  You can build flex to generate 8-bit scanners
+	  for -Cf and -CF, too, by adding -DDEFAULT_CSIZE=256 to CFLAGS
+	  in the Makefile.
+
+	- You no longer need to call the scanner routine yyrestart() to
+	  inform the scanner that you have switched to a new file after
+	  having seen an EOF on the current input file.  Instead, just
+	  point yyin at the new file and continue scanning.
+
+	- You no longer need to invoke YY_NEW_FILE in an <<EOF>> action
+	  to indicate you wish to continue scanning.  Simply point yyin
+	  at a new file.
+
+	- A leading '#' no longer introduces a comment in a flex input.
+
+	- flex no longer considers formfeed ('\f') a whitespace character.
+
+	- %t, I'm happy to report, has been nuked.
+
+	- The '-p' option may be given twice ('-pp') to instruct flex to
+	  report minor performance problems as well as major ones.
+
+	- The '-v' verbose output no longer includes start/finish time
+	  information.
+
+	- Newlines in flex inputs can optionally include leading or
+	  trailing carriage-returns ('\r'), in support of several PC/Mac
+	  run-time libraries that automatically include these.
+
+	- A start condition of the form "<*>" makes the following rule
+	  active in every start condition, whether exclusive or inclusive.
+
+	- The following items have been corrected in the flex documentation:
+
+		- '-C' table compression options *are* cumulative.
+
+		- You may modify yytext but not lengthen it by appending
+		  characters to the end.  Modifying its final character
+		  will affect '^' anchoring for the next rule matched
+		  if the character is changed to or from a newline.
+
+		- The term "backtracking" has been renamed "backing up",
+		  since it is a one-time repositioning and not a repeated
+		  search.  What used to be the "lex.backtrack" file is now
+		  "lex.backup".
+
+		- Unindented "/* ... */" comments are allowed in the first
+		  flex input section, but not in the second.
+
+		- yyless() can only be used in the flex input source, not
+		  externally.
+
+		- You can use "yyrestart(yyin)" to throw away the
+		  current contents of the input buffer.
+
+		- To write high-speed scanners, attempt to match as much
+		  text as possible with each rule.  See MISC/fastwc/README
+		  for more information.
+
+		- Using the beginning-of-line operator ('^') is fairly
+		  cheap.  Using unput() is expensive.  Using yyless() is
+		  cheap.
+
+		- An example of scanning strings with embedded escape
+		  sequences has been added.
+
+		- The example of backing-up in flexdoc was erroneous; it
+		  has been corrected.
+
+	- A flex scanner's internal buffer now dynamically grows if needed
+	  to match large tokens.  Note that growing the buffer presently
+	  requires rescanning the (large) token, so consuming a lot of
+	  text this way is a slow process.  Also note that presently the
+	  buffer does *not* grow if you unput() more text than can fit
+	  into the buffer.
+
+	- The MISC/ directory has been reorganized; see MISC/README for
+	  details.
+
+	- yyless() can now be used in the third (user action) section
+	  of a scanner specification, thanks to Ceriel Jacobs.  yyless()
+	  remains a macro and cannot be used outside of the scanner source.
+
+	- The skeleton file is no longer opened at run-time, but instead
+	  compiled into a large string array (thanks to John Gilmore and
+	  friends at Cygnus).  You can still use the -S flag to point flex
+	  at a different skeleton file.
+
+	- flex no longer uses a temporary file to store the scanner's
+	  actions.
+
+	- A number of changes have been made to decrease porting headaches.
+	  In particular, flex no longer uses memset() or ctime(), and
+	  provides a single simple mechanism for dealing with C compilers
+	  that still define malloc() as returning char* instead of void*.
+
+	- Flex now detects if the scanner specification requires the -8 flag
+	  but the flag was not given or on by default.
+
+	- A number of table-expansion fencepost bugs have been fixed,
+	  making flex more robust for generating large scanners.
+
+	- flex more consistently identifies the location of errors in
+	  its input.
+
+	- YY_USER_ACTION is now invoked only for "real" actions, not for
+	  internal actions used by the scanner for things like filling
+	  the buffer or handling EOF.
+
+	- The rule "[^]]" now matches any character other than a ']';
+	  formerly it matched any character at all followed by a ']'.
+	  This change was made for compatibility with AT&T lex.
+
+	- A large number of miscellaneous bugs have been found and fixed
+	  thanks to Gerhard Wilhelms.
+
+	- The source code has been heavily reformatted, making patches
+	  relative to previous flex releases no longer accurate.
+
+
+Changes between 2.3 Patch #8 (21Feb93) and 2.3 Patch #7:
+
+	- Fixed bugs in dynamic memory allocation leading to grievous
+	  fencepost problems when generating large scanners.
+	- Fixed bug causing infinite loops on character classes with 8-bit
+	  characters in them.
+	- Fixed bug in matching repetitions with a lower bound of 0.
+	- Fixed bug in scanning NUL characters using an "interactive" scanner.
+	- Fixed bug in using yymore() at the end of a file.
+	- Fixed bug in misrecognizing rules with variable trailing context.
+	- Fixed bug compiling flex on Suns using gcc 2.
+	- Fixed bug in not recognizing that input files with the character
+	  ASCII 128 in them require the -8 flag.
+	- Fixed bug that could cause an infinite loop writing out
+	  error messages.
+	- Fixed bug in not recognizing old-style lex % declarations if
+	  followed by a tab instead of a space.
+	- Fixed potential crash when flex terminated early (usually due
+	  to a bad flag) and the -v flag had been given.
+	- Added some missing declarations of void functions.
+	- Changed to only use '\a' for __STDC__ compilers.
+	- Updated mailing addresses.
+
+
+Changes between 2.3 Patch #7 (28Mar91) and 2.3 Patch #6:
+
+	- Fixed out-of-bounds array access that caused bad tables
+	  to be produced on machines where the bad reference happened
+	  to yield a 1.  This caused problems installing or running
+	  flex on some Suns, in particular.
+
+
+Changes between 2.3 Patch #6 (29Aug90) and 2.3 Patch #5:
+
+	- Fixed a serious bug in yymore() which basically made it
+	  completely broken.  Thanks goes to Jean Christophe of
+	  the Nethack development team for finding the problem
+	  and passing along the fix.
+
+
+Changes between 2.3 Patch #5 (16Aug90) and 2.3 Patch #4:
+
+	- An up-to-date version of initscan.c so "make test" will
+	  work after applying the previous patches
+
+
+Changes between 2.3 Patch #4 (14Aug90) and 2.3 Patch #3:
+
+	- Fixed bug in hexadecimal escapes which allowed only digits,
+	  not letters, in escapes
+	- Fixed bug in previous "Changes" file!
+
+
+Changes between 2.3 Patch #3 (03Aug90) and 2.3 Patch #2:
+
+	- Correction to patch #2 for gcc compilation; thanks goes to
+	  Paul Eggert for catching this.
+
+
+Changes between 2.3 Patch #2 (02Aug90) and original 2.3 release:
+
+	- Fixed (hopefully) headaches involving declaring malloc()
+	  and free() for gcc, which defines __STDC__ but (often) doesn't
+	  come with the standard include files such as <stdlib.h>.
+	  Reordered #ifdef maze in the scanner skeleton in the hope of
+	  getting the declarations right for cfront and g++, too.
+
+	- Note that this patch supercedes patch #1 for release 2.3,
+	  which was never announced but was available briefly for
+	  anonymous ftp.
+
+
+Changes between 2.3 (full) release of 28Jun90 and 2.2 (alpha) release:
+
+User-visible:
+
+	- A lone <<EOF>> rule (that is, one which is not qualified with
+	  a list of start conditions) now specifies the EOF action for
+	  *all* start conditions which haven't already had <<EOF>> actions
+	  given.  To specify an end-of-file action for just the initial
+	  state, use <INITIAL><<EOF>>.
+
+	- -d debug output is now contigent on the global yy_flex_debug
+	  being set to a non-zero value, which it is by default.
+
+	- A new macro, YY_USER_INIT, is provided for the user to specify
+	  initialization action to be taken on the first call to the
+	  scanner.  This action is done before the scanner does its
+	  own initialization.
+
+	- yy_new_buffer() has been added as an alias for yy_create_buffer()
+
+	- Comments beginning with '#' and extending to the end of the line
+	  now work, but have been deprecated (in anticipation of making
+	  flex recognize #line directives).
+
+	- The funky restrictions on when semi-colons could follow the
+	  YY_NEW_FILE and yyless macros have been removed.  They now
+	  behave identically to functions.
+
+	- A bug in the sample redefinition of YY_INPUT in the documentation
+	  has been corrected.
+
+	- A bug in the sample simple tokener in the documentation has
+	  been corrected.
+
+	- The documentation on the incompatibilities between flex and
+	  lex has been reordered so that the discussion of yylineno
+	  and input() come first, as it's anticipated that these will
+	  be the most common source of headaches.
+
+
+Things which didn't used to be documented but now are:
+
+	- flex interprets "^foo|bar" differently from lex.  flex interprets
+	  it as "match either a 'foo' or a 'bar', providing it comes at the
+	  beginning of a line", whereas lex interprets it as "match either
+	  a 'foo' at the beginning of a line, or a 'bar' anywhere".
+
+	- flex initializes the global "yyin" on the first call to the
+	  scanner, while lex initializes it at compile-time.
+
+	- yy_switch_to_buffer() can be used in the yywrap() macro/routine.
+
+	- flex scanners do not use stdio for their input, and hence when
+	  writing an interactive scanner one must explictly call fflush()
+	  after writing out a prompt.
+
+	- flex scanner can be made reentrant (after a fashion) by using
+	  "yyrestart( yyin );".  This is useful for interactive scanners
+	  which have interrupt handlers that long-jump out of the scanner.
+
+	- a defense of why yylineno is not supported is included, along
+	  with a suggestion on how to convert scanners which rely on it.
+
+
+Other changes:
+
+	- Prototypes and proper declarations of void routines have
+	  been added to the flex source code, courtesy of Kevin B. Kenny.
+
+	- Routines dealing with memory allocation now use void* pointers
+	  instead of char* - see Makefile for porting implications.
+
+	- Error-checking is now done when flex closes a file.
+
+	- Various lint tweaks were added to reduce the number of gripes.
+
+	- Makefile has been further parameterized to aid in porting.
+
+	- Support for SCO Unix added.
+
+	- Flex now sports the latest & greatest UC copyright notice
+	  (which is only slightly different from the previous one).
+
+	- A note has been added to flexdoc.1 mentioning work in progress
+	  on modifying flex to generate straight C code rather than a
+	  table-driven automaton, with an email address of whom to contact
+	  if you are working along similar lines.
+
+
+Changes between 2.2 Patch #3 (30Mar90) and 2.2 Patch #2:
+
+	- fixed bug which caused -I scanners to bomb
+
+
+Changes between 2.2 Patch #2 (27Mar90) and 2.2 Patch #1:
+
+	- fixed bug writing past end of input buffer in yyunput()
+	- fixed bug detecting NUL's at the end of a buffer
+
+
+Changes between 2.2 Patch #1 (23Mar90) and 2.2 (alpha) release:
+
+	- Makefile fixes: definition of MAKE variable for systems
+	  which don't have it; installation of flexdoc.1 along with
+	  flex.1; fixed two bugs which could cause "bigtest" to fail.
+
+	- flex.skel fix for compiling with g++.
+
+	- README and flexdoc.1 no longer list an out-of-date BITNET address
+	  for contacting me.
+
+	- minor typos and formatting changes to flex.1 and flexdoc.1.
+
+
+Changes between 2.2 (alpha) release of March '90 and previous release:
+
+User-visible:
+
+	- Full user documentation now available.
+
+	- Support for 8-bit scanners.
+
+	- Scanners now accept NUL's.
+
+	- A facility has been added for dealing with multiple
+	  input buffers.
+
+	- Two manual entries now.  One which fully describes flex
+	  (rather than just its differences from lex), and the
+	  other for quick(er) reference.
+
+	- A number of changes to bring flex closer into compliance
+	  with the latest POSIX lex draft:
+
+		%t support
+		flex now accepts multiple input files and concatenates
+		    them together to form its input
+		previous -c (compress) flag renamed -C
+		do-nothing -c and -n flags added
+		Any indented code or code within %{}'s in section 2 is
+		    now copied to the output
+
+	- yyleng is now a bona fide global integer.
+
+	- -d debug information now gives the line number of the
+	  matched rule instead of which number rule it was from
+	  the beginning of the file.
+
+	- -v output now includes a summary of the flags used to generate
+	  the scanner.
+
+	- unput() and yyrestart() are now globally callable.
+
+	- yyrestart() no longer closes the previous value of yyin.
+
+	- C++ support; generated scanners can be compiled with C++ compiler.
+
+	- Primitive -lfl library added, containing default main()
+	  which calls yylex().  A number of routines currently living
+	  in the scanner skeleton will probably migrate to here
+	  in the future (in particular, yywrap() will probably cease
+	  to be a macro and instead be a function in the -lfl library).
+
+	- Hexadecimal (\x) escape sequences added.
+
+	- Support for MS-DOS, VMS, and Turbo-C integrated.
+
+	- The %used/%unused operators have been deprecated.  They
+	  may go away soon.
+
+
+Other changes:
+
+	- Makefile enhanced for easier testing and installation.
+	- The parser has been tweaked to detect some erroneous
+	  constructions which previously were missed.
+	- Scanner input buffer overflow is now detected.
+	- Bugs with missing "const" declarations fixed.
+	- Out-of-date Minix/Atari patches provided.
+	- Scanners no longer require printf() unless FLEX_DEBUG is being used.
+	- A subtle input() bug has been fixed.
+	- Line numbers for "continued action" rules (those following
+	  the special '|' action) are now correct.
+	- unput() bug fixed; had been causing problems porting flex to VMS.
+	- yymore() handling rewritten to fix bug with interaction
+	  between yymore() and trailing context.
+	- EOF in actions now generates an error message.
+	- Bug involving -CFe and generating equivalence classes fixed.
+	- Bug which made -CF be treated as -Cf fixed.
+	- Support for SysV tmpnam() added.
+	- Unused #define's for scanner no longer generated.
+	- Error messages which are associated with a particular input
+	  line are now all identified with their input line in standard
+	  format.
+	- % directives which are valid to lex but not to flex are
+	  now ignored instead of generating warnings.
+	- -DSYS_V flag can now also be specified -DUSG for System V
+	  compilation.
+
+
+Changes between 2.1 beta-test release of June '89 and previous release:
+
+User-visible:
+
+	- -p flag generates a performance report to stderr.  The report
+	  consists of comments regarding features of the scanner rules
+	  which result in slower scanners.
+
+	- -b flag generates backtracking information to lex.backtrack.
+	  This is a list of scanner states which require backtracking
+	  and the characters on which they do so.  By adding rules
+	  one can remove backtracking states.  If all backtracking states
+	  are eliminated, the generated scanner will run faster.
+	  Backtracking is not yet documented in the manual entry.
+
+	- Variable trailing context now works, i.e., one can have
+	  rules like "(foo)*/[ \t]*bletch".  Some trailing context
+	  patterns still cannot be properly matched and generate
+	  error messages.  These are patterns where the ending of the
+	  first part of the rule matches the beginning of the second
+	  part, such as "zx*/xy*", where the 'x*' matches the 'x' at
+	  the beginning of the trailing context.  Lex won't get these
+	  patterns right either.
+
+	- Faster scanners.
+
+	- End-of-file rules.  The special rule "<<EOF>>" indicates
+	  actions which are to be taken when an end-of-file is
+	  encountered and yywrap() returns non-zero (i.e., indicates
+	  no further files to process).  See manual entry for example.
+
+	- The -r (reject used) flag is gone.  flex now scans the input
+	  for occurrences of the string "REJECT" to determine if the
+	  action is needed.  It tries to be intelligent about this but
+	  can be fooled.  One can force the presence or absence of
+	  REJECT by adding a line in the first section of the form
+	  "%used REJECT" or "%unused REJECT".
+
+	- yymore() has been implemented.  Similarly to REJECT, flex
+	  detects the use of yymore(), which can be overridden using
+	  "%used" or "%unused".
+
+	- Patterns like "x{0,3}" now work (i.e., with lower-limit == 0).
+
+	- Removed '\^x' for ctrl-x misfeature.
+
+	- Added '\a' and '\v' escape sequences.
+
+	- \<digits> now works for octal escape sequences; previously
+	  \0<digits> was required.
+
+	- Better error reporting; line numbers are associated with rules.
+
+	- yyleng is a macro; it cannot be accessed outside of the
+	  scanner source file.
+
+	- yytext and yyleng should not be modified within a flex action.
+
+	- Generated scanners #define the name FLEX_SCANNER.
+
+	- Rules are internally separated by YY_BREAK in lex.yy.c rather
+	  than break, to allow redefinition.
+
+	- The macro YY_USER_ACTION can be redefined to provide an action
+	  which is always executed prior to the matched rule's action.
+	
+	- yyrestart() is a new action which can be used to restart
+	  the scanner after it has seen an end-of-file (a "real" one,
+	  that is, one for which yywrap() returned non-zero).  It takes
+	  a FILE* argument indicating a new file to scan and sets
+	  things up so that a subsequent call to yylex() will start
+	  scanning that file.
+
+	- Internal scanner names all preceded by "yy_"
+
+	- lex.yy.c is deleted if errors are encountered during processing.
+
+	- Comments may be put in the first section of the input by preceding
+	  them with '#'.
+
+
+
+Other changes:
+
+	- Some portability-related bugs fixed, in particular for machines
+	  with unsigned characters or sizeof( int* ) != sizeof( int ).
+	  Also, tweaks for VMS and Microsoft C (MS-DOS), and identifiers all
+	  trimmed to be 31 or fewer characters.  Shortened file names
+	  for dinosaur OS's.  Checks for allocating > 64K memory
+	  on 16 bit'ers.  Amiga tweaks.  Compiles using gcc on a Sun-3.
+	- Compressed and fast scanner skeletons merged.
+	- Skeleton header files done away with.
+	- Generated scanner uses prototypes and "const" for __STDC__.
+	- -DSV flag is now -DSYS_V for System V compilation.
+	- Removed all references to FTL language.
+	- Software now covered by BSD Copyright.
+	- flex will replace lex in subsequent BSD releases.
diff --git a/README b/README
new file mode 100644
index 0000000..4d60614
--- /dev/null
+++ b/README
@@ -0,0 +1,113 @@
+This is flex, the fast lexical analyzer generator.
+
+flex is a tool for generating scanners: programs which recognize
+lexical patterns in text.
+
+More information about flex as well as the latest official release of
+flex can be found at:
+
+http://flex.sourceforge.net/
+
+The flex codebase is kept in git at:
+
+https://github.com/westes/flex
+
+Bugs and pull requests should be filed against flex using github's
+issue tracker and pull request facilities.
+
+There are several mailing lists available as well:
+
+flex-announce@lists.sourceforge.net - where posts will be made
+announcing new releases of flex.
+
+flex-help@lists.sourceforge.net - where you can post questions about
+using flex
+
+flex-devel@lists.sourceforge.net - where you can discuss development of
+flex itself
+
+Find information on subscribing to the mailing lists at:
+
+http://sourceforge.net/mail/?group_id=97492
+
+The flex distribution contains the following files which may be of interest:
+
+README - This file.
+NEWS - current version number and list of user-visible changes.
+INSTALL - basic installation information.
+ABOUT-NLS - description of internationalization support in flex.
+COPYING - flex's copyright and license.
+doc/ - user documentation.
+examples/ - containing examples of some possible flex scanners and a
+	few other things. See the file examples/README for more details.
+TODO - outstanding bug reports, desired features, etc.
+tests/ - regression tests. See TESTS/README for details.
+po/ - internationalization support files.
+
+You need the following tools to build flex from the maintainer's
+repository:
+
+compiler suite - flex is built with gcc
+bash, or a good Bourne-style shell
+m4 - m4 -p needs to work; GNU m4 and a few others are suitable
+GNU bison;  to generate parse.c from parse.y
+autoconf; for handling the build system
+automake; for Makefile generation
+gettext; for i18n support
+help2man; to generate the flex man page
+tar, gzip, etc.; for packaging of the source distribution
+
+GNU texinfo; to build and test the flex manual. Note that if you want
+to build the dvi/ps/pdf versions of the documentation you will need
+texi2dvi and related programs, along with a sufficiently powerful
+implementation of \TeX to process them. See your operating system
+documentation for how to achieve this. The printable versions of the
+manual are not built unless specifically requested, but the targets
+are included by automake.
+
+GNU indent; for indenting the flex source the way we want it done
+
+In cases where the versions of the above tools matter, the file
+configure.ac will specify the minimum required versions.
+
+Once you have all the necessary tools installed, life becomes
+simple. To prepare the flex tree for building, run the script:
+
+$ ./autogen.sh
+
+in the top level of the flex source tree.
+This script calls the various tools needed to get flex ready for the
+GNU-style configure script to be able to work.
+
+From this point on, building flex follows the usual configure, make,
+make install routine.
+
+This file is part of flex.
+
+This code is derived from software contributed to Berkeley by
+Vern Paxson.
+
+The United States Government has rights in this work pursuant
+to contract no. DE-AC03-76SF00098 between the United States
+Department of Energy and the University of California.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+Neither the name of the University nor the names of its contributors
+may be used to endorse or promote products derived from this software
+without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.
+
+
diff --git a/THANKS b/THANKS
new file mode 100644
index 0000000..ac91ef6
--- /dev/null
+++ b/THANKS
@@ -0,0 +1,53 @@
+Vern had the following things to say:
+
+Many thanks to the 2.5 beta-testers for finding bugs and helping test and
+increase portability: Stan Adermann, Scott David Daniels, Charles Elliott,
+Joe Gayda, Chris Meier, James Nordby, Terrence O'Kane, Karsten Pahnke,
+Francois Pinard, Pat Rankin, Andreas Scherer, Marc Wiese, Nathan Zelle.
+
+Thanks to the many flex beta-testers, feedbackers, and contributors,
+especially Francois Pinard, Casey Leedom, Robert Abramovitz, Stan
+Adermann, Terry Allen, David Barker-Plummer, John Basrai, Neal Becker,
+Nelson H.F. Beebe, benson@odi.com, Karl Berry, Peter A. Bigot, Simon
+Blanchard, Keith Bostic, Frederic Brehm, Ian Brockbank, Kin Cho, Nick
+Christopher, Brian Clapper, J.T. Conklin, Jason Coughlin, Bill Cox,
+Nick Cropper, Dave Curtis, Scott David Daniels, Chris G. Demetriou,
+Theo Deraadt, Mike Donahue, Chuck Doucette, Tom Epperly, Leo Eskin,
+Chris Faylor, Chris Flatters, Jon Forrest, Jeffrey Friedl, Joe Gayda,
+Kaveh R. Ghazi, Wolfgang Glunz, Eric Goldman, Christopher M. Gould,
+Ulrich Grepel, Peer Griebel, Jan Hajic, Charles Hemphill, NORO Hideo,
+Jarkko Hietaniemi, Scott Hofmann, Jeff Honig, Dana Hudes, Eric Hughes,
+John Interrante, Ceriel Jacobs, Michal Jaegermann, Sakari Jalovaara,
+Jeffrey R. Jones, Henry Juengst, Klaus Kaempf, Jonathan I. Kamens,
+Terrence O Kane, Amir Katz, ken@ken.hilco.com, Kevin B. Kenny, Steve
+Kirsch, Winfried Koenig, Marq Kole, Ronald Lamprecht, Greg Lee, Rohan
+Lenard, Craig Leres, John Levine, Steve Liddle, David Loffredo, Mike
+Long, Mohamed el Lozy, Brian Madsen, Malte, Joe Marshall, Bengt
+Martensson, Chris Metcalf, Luke Mewburn, Jim Meyering, R. Alexander
+Milowski, Erik Naggum, G.T. Nicol, Landon Noll, James Nordby, Marc
+Nozell, Richard Ohnemus, Karsten Pahnke, Sven Panne, Roland Pesch,
+Walter Pelissero, Gaumond Pierre, Esmond Pitt, Jef Poskanzer, Joe
+Rahmeh, Jarmo Raiha, Frederic Raimbault, Pat Rankin, Rick Richardson,
+Kevin Rodgers, Kai Uwe Rommel, Jim Roskind, Alberto Santini, Andreas
+Scherer, Darrell Schiebel, Raf Schietekat, Doug Schmidt, Philippe
+Schnoebelen, Andreas Schwab, Larry Schwimmer, Alex Siegel, Eckehard
+Stolz, Jan-Erik Strvmquist, Mike Stump, Paul Stuart, Dave Tallman, Ian
+Lance Taylor, Chris Thewalt, Richard M. Timoney, Jodi Tsai, Paul
+Tuinenga, Gary Weik, Frank Whaley, Gerhard Wilhelms, Kent Williams,
+Ken Yap, Ron Zellar, Nathan Zelle, David Zuhn, and those whose names
+have slipped my marginal mail-archiving skills but whose contributions
+are appreciated all the same.
+
+Thanks to Keith Bostic, Jon Forrest, Noah Friedman,
+John Gilmore, Craig Leres, John Levine, Bob Mulcahy, G.T.
+Nicol, Francois Pinard, Rich Salz, and Richard Stallman for help with various
+distribution headaches.
+
+Thanks to Esmond Pitt and Earle Horton for 8-bit character support; to
+Benson Margulies and Fred Burke for C++ support; to Kent Williams and Tom
+Epperly for C++ class support; to Ove Ewerlid for support of NUL's; and to
+Eric Hughes for support of multiple buffers.
+
+This work was primarily done when I was with the Real Time Systems Group
+at the Lawrence Berkeley Laboratory in Berkeley, CA.  Many thanks to all there
+for the support I received.
diff --git a/TODO b/TODO
new file mode 100644
index 0000000..702a6db
--- /dev/null
+++ b/TODO
@@ -0,0 +1,66 @@
+* the manual:
+
+** do an end-to-end proofread of the manual (this is under way, but is
+   going slowly)
+
+** pretty up the dvi output; overflows, etc.
+
+** faq
+
+*** clean up the faqs section. The information is good; the texinfo
+   could use some touching up.
+
+*** index the faq entries
+
+*** mention that it's possible to use a variable to scan matching
+    brackets, nested comments etc.
+
+*** include something about lexing/parsing fortran
+
+** create a section on flex design, features, etc.
+
+* getext
+
+** make sure all flex modules use gettext translation facilities
+
+*subdirectories
+
+** in examples/manual, integrate the Makefile.examples into the
+    Makefile.am
+
+* test suite
+
+** integrate the test suite into automake's framework (note that the
+   test suite can be run from the top level directory with "make
+   check". Still, we want to get it completely under automake's control.)
+
+** make test suite more complete
+
+* generic coding
+
+** move as much skeleton code as possible out of gen.c and into
+  flex.skl
+
+** figure out whether we want to add the capability to have
+  auto-generated backout rules
+
+** token-type and token buffer support
+
+** check if we still need to #undef macros at the end of a header
+
+** merge yylineno into support for location tracking
+
+** bug where yylineno is not decremented on REJECT
+
+** bug where yylineno is counted in trailing context
+
+* C++
+
+** have a separate skeleton for c++
+
+** revisit the C++ API. We get requests to make it more complete.
+
+Local Variables:
+Mode: text
+mode: outline-minor
+End:
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000..1a4e650
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,1184 @@
+# generated automatically by aclocal 1.15 -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.15'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.15], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.15])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
+      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
+      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
+      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                    [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+  [--enable-dependency-tracking],
+  [do not reject slow dependency extractors])
+AS_HELP_STRING(
+  [--disable-dependency-tracking],
+  [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named 'Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running 'make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "$am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+             [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+  [ok:ok],,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES([CC])],
+		  [m4_define([AC_PROG_CC],
+			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES([CXX])],
+		  [m4_define([AC_PROG_CXX],
+			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES([OBJC])],
+		  [m4_define([AC_PROG_OBJC],
+			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+		  [_AM_DEPENDENCIES([OBJCXX])],
+		  [m4_define([AC_PROG_OBJCXX],
+			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+  fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Copyright (C) 1998-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_LEX
+# -----------
+# Autoconf leaves LEX=: if lex or flex can't be found.  Change that to a
+# "missing" invocation, for better error output.
+AC_DEFUN([AM_PROG_LEX],
+[AC_PREREQ([2.50])dnl
+AC_REQUIRE([AM_MISSING_HAS_RUN])dnl
+AC_REQUIRE([AC_PROG_LEX])dnl
+if test "$LEX" = :; then
+  LEX=${am_missing_run}flex
+fi])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+  [whether $CC understands -c and -o together],
+  [am_cv_prog_cc_c_o],
+  [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$[*]" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$[*]" != "X $srcdir/configure conftest.file" \
+	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment])
+     fi
+     if test "$[2]" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+  [AC_MSG_CHECKING([that generated files are newer than configure])
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+  [--enable-silent-rules],
+  [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+  [--disable-silent-rules],
+  [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+   [am_cv_make_support_nested_variables],
+   [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+  dnl Using '$V' instead of '$(V)' breaks IRIX make.
+  AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+  [m4_case([$1],
+    [ustar],
+     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+      # There is notably a 21 bits limit for the UID and the GID.  In fact,
+      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+      # and bug#13588).
+      am_max_uid=2097151 # 2^21 - 1
+      am_max_gid=$am_max_uid
+      # The $UID and $GID variables are not portable, so we need to resort
+      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
+      # below are definitely unexpected, so allow the users to see them
+      # (that is, avoid stderr redirection).
+      am_uid=`id -u || echo unknown`
+      am_gid=`id -g || echo unknown`
+      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+      if test $am_uid -le $am_max_uid; then
+         AC_MSG_RESULT([yes])
+      else
+         AC_MSG_RESULT([no])
+         _am_tools=none
+      fi
+      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+      if test $am_gid -le $am_max_gid; then
+         AC_MSG_RESULT([yes])
+      else
+        AC_MSG_RESULT([no])
+        _am_tools=none
+      fi],
+
+  [pax],
+    [],
+
+  [m4_fatal([Unknown tar format])])
+
+  AC_MSG_CHECKING([how to create a $1 tar archive])
+
+  # Go ahead even if we have the value already cached.  We do so because we
+  # need to set the values for the 'am__tar' and 'am__untar' variables.
+  _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+  for _am_tool in $_am_tools; do
+    case $_am_tool in
+    gnutar)
+      for _am_tar in tar gnutar gtar; do
+        AM_RUN_LOG([$_am_tar --version]) && break
+      done
+      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+      am__untar="$_am_tar -xf -"
+      ;;
+    plaintar)
+      # Must skip GNU tar: if it does not support --format= it doesn't create
+      # ustar tarball either.
+      (tar --version) >/dev/null 2>&1 && continue
+      am__tar='tar chf - "$$tardir"'
+      am__tar_='tar chf - "$tardir"'
+      am__untar='tar xf -'
+      ;;
+    pax)
+      am__tar='pax -L -x $1 -w "$$tardir"'
+      am__tar_='pax -L -x $1 -w "$tardir"'
+      am__untar='pax -r'
+      ;;
+    cpio)
+      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+      am__untar='cpio -i -H $1 -d'
+      ;;
+    none)
+      am__tar=false
+      am__tar_=false
+      am__untar=false
+      ;;
+    esac
+
+    # If the value was cached, stop now.  We just wanted to have am__tar
+    # and am__untar set.
+    test -n "${am_cv_prog_tar_$1}" && break
+
+    # tar/untar a dummy directory, and stop if the command works.
+    rm -rf conftest.dir
+    mkdir conftest.dir
+    echo GrepMe > conftest.dir/file
+    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+    rm -rf conftest.dir
+    if test -s conftest.tar; then
+      AM_RUN_LOG([$am__untar <conftest.tar])
+      AM_RUN_LOG([cat conftest.dir/file])
+      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+    fi
+  done
+  rm -rf conftest.dir
+
+  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+  AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/gettext.m4])
+m4_include([m4/iconv.m4])
+m4_include([m4/intlmacosx.m4])
+m4_include([m4/lib-ld.m4])
+m4_include([m4/lib-link.m4])
+m4_include([m4/lib-prefix.m4])
+m4_include([m4/libtool.m4])
+m4_include([m4/ltoptions.m4])
+m4_include([m4/ltsugar.m4])
+m4_include([m4/ltversion.m4])
+m4_include([m4/lt~obsolete.m4])
+m4_include([m4/nls.m4])
+m4_include([m4/po.m4])
+m4_include([m4/progtest.m4])
diff --git a/autogen.sh b/autogen.sh
new file mode 100755
index 0000000..46611bf
--- /dev/null
+++ b/autogen.sh
@@ -0,0 +1,33 @@
+#!/bin/sh
+
+#  This file is part of flex.
+
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in the
+#     documentation and/or other materials provided with the distribution.
+
+#  Neither the name of the University nor the names of its contributors
+#  may be used to endorse or promote products derived from this software
+#  without specific prior written permission.
+
+#  THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+#  IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+#  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+#  PURPOSE.
+
+# If you see no configure script, then run ./autogen.sh to create it
+# and procede with the "normal" build procedures.
+
+#if we pretend to have a ChangeLog, then automake is less
+#worried. (Don't worry, we *do* have a ChangeLog, we just need the
+#Makefile first.)
+
+touch ChangeLog
+libtoolize --install --force || glibtoolize --install --force
+autoreconf --install --force
diff --git a/build-aux/compile b/build-aux/compile
new file mode 100755
index 0000000..a85b723
--- /dev/null
+++ b/build-aux/compile
@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/config.guess b/build-aux/config.guess
new file mode 100755
index 0000000..6c32c86
--- /dev/null
+++ b/build-aux/config.guess
@@ -0,0 +1,1421 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright 1992-2014 Free Software Foundation, Inc.
+
+timestamp='2014-11-04'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches to <config-patches@gnu.org>.
+
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright 1992-2014 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	eval $set_cc_for_build
+	cat <<-EOF > $dummy.c
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	LIBC=gnu
+	#endif
+	EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
+	;;
+esac
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep -q __ELF__
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+		os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+	echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux${UNAME_RELEASE}
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+	echo m68k-milan-mint${UNAME_RELEASE}
+	exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+	echo m68k-hades-mint${UNAME_RELEASE}
+	exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+	echo m68k-unknown-mint${UNAME_RELEASE}
+	exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[4567])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/lslpp ] ; then
+		IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+			   awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "${sc_cpu_version}" in
+		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "${sc_kernel_bits}" in
+			  32) HP_ARCH="hppa2.0n" ;;
+			  64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+			esac ;;
+		    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^		//' << EOF >$dummy.c
+
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
+
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
+
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+	exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+	exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+	exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+	exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    5000:UNIX_System_V:4.*:*)
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case ${UNAME_PROCESSOR} in
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    *:MINGW64*:*)
+	echo ${UNAME_MACHINE}-pc-mingw64
+	exit ;;
+    *:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    *:MSYS*:*)
+	echo ${UNAME_MACHINE}-pc-msys
+	exit ;;
+    i*:windows32*:*)
+	# uname -m includes "-pc" on this system.
+	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    *:Interix*:*)
+	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    authenticamd | genuineintel | EM64T)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    8664:Windows_NT:*)
+	echo x86_64-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    aarch64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	else
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+	    else
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+	    fi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    cris:Linux:*:*)
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	exit ;;
+    crisv32:Linux:*:*)
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	exit ;;
+    frv:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    hexagon:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    i*86:Linux:*:*)
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=${UNAME_MACHINE}el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=${UNAME_MACHINE}
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
+	;;
+    openrisc*:Linux:*:*)
+	echo or1k-unknown-linux-${LIBC}
+	exit ;;
+    or32:Linux:*:* | or1k*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-${LIBC}
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-${LIBC}
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
+	esac
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-${LIBC}
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-${LIBC}
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-${LIBC}
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-${LIBC}
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
+	exit ;;
+    sh64*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    tile*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+	exit ;;
+    x86_64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    xtensa*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+	# Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configury will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
+	exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+		echo mips-nec-sysv${UNAME_RELEASE}
+	else
+		echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+	exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	eval $set_cc_for_build
+	if test "$UNAME_PROCESSOR" = unknown ; then
+	    UNAME_PROCESSOR=powerpc
+	fi
+	if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
+	    if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		    (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		    grep IS_64BIT_ARCH >/dev/null
+		then
+		    case $UNAME_PROCESSOR in
+			i386) UNAME_PROCESSOR=x86_64 ;;
+			powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		    esac
+		fi
+	    fi
+	elif test "$UNAME_PROCESSOR" = i386 ; then
+	    # Avoid executing cc on OS X 10.9, as it ships with a stub
+	    # that puts up a graphical alert prompting to install
+	    # developer tools.  Any system running Mac OS X 10.7 or
+	    # later (Darwin 11 and later) is required to have a 64-bit
+	    # processor. This is not true of the ARM version of Darwin
+	    # that Apple uses in portable devices.
+	    UNAME_PROCESSOR=x86_64
+	fi
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NEO-?:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSE-*:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+	echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
+    x86_64:VMkernel:*:*)
+	echo ${UNAME_MACHINE}-unknown-esx
+	exit ;;
+esac
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/build-aux/config.rpath b/build-aux/config.rpath
new file mode 100755
index 0000000..ab6fd99
--- /dev/null
+++ b/build-aux/config.rpath
@@ -0,0 +1,690 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+#   Copyright 1996-2014 Free Software Foundation, Inc.
+#   Taken from GNU libtool, 2001
+#   Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+#   This file is free software; the Free Software Foundation gives
+#   unlimited permission to copy and/or distribute it, with or without
+#   modifications, as long as this notice is preserved.
+#
+# The first argument passed to this file is the canonical host specification,
+#    CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+#    CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+#   than 256 bytes, otherwise the compiler driver will dump core. The only
+#   known workaround is to choose shorter directory names for the build
+#   directory and/or the installation directory.
+
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
+# Code taken from libtool.m4's _LT_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+  wl='-Wl,'
+else
+  case "$host_os" in
+    aix*)
+      wl='-Wl,'
+      ;;
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      ;;
+    hpux9* | hpux10* | hpux11*)
+      wl='-Wl,'
+      ;;
+    irix5* | irix6* | nonstopux*)
+      wl='-Wl,'
+      ;;
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+        ecc*)
+          wl='-Wl,'
+          ;;
+        icc* | ifort*)
+          wl='-Wl,'
+          ;;
+        lf95*)
+          wl='-Wl,'
+          ;;
+        nagfor*)
+          wl='-Wl,-Wl,,'
+          ;;
+        pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+          wl='-Wl,'
+          ;;
+        ccc*)
+          wl='-Wl,'
+          ;;
+        xl* | bgxl* | bgf* | mpixl*)
+          wl='-Wl,'
+          ;;
+        como)
+          wl='-lopt='
+          ;;
+        *)
+          case `$CC -V 2>&1 | sed 5q` in
+            *Sun\ F* | *Sun*Fortran*)
+              wl=
+              ;;
+            *Sun\ C*)
+              wl='-Wl,'
+              ;;
+          esac
+          ;;
+      esac
+      ;;
+    newsos6)
+      ;;
+    *nto* | *qnx*)
+      ;;
+    osf3* | osf4* | osf5*)
+      wl='-Wl,'
+      ;;
+    rdos*)
+      ;;
+    solaris*)
+      case $cc_basename in
+        f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+          wl='-Qoption ld '
+          ;;
+        *)
+          wl='-Wl,'
+          ;;
+      esac
+      ;;
+    sunos4*)
+      wl='-Qoption ld '
+      ;;
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      wl='-Wl,'
+      ;;
+    sysv4*MP*)
+      ;;
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      wl='-Wl,'
+      ;;
+    unicos*)
+      wl='-Wl,'
+      ;;
+    uts4*)
+      ;;
+  esac
+fi
+
+# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # Set some defaults for GNU ld with shared library support. These
+  # are reset later if shared libraries are not supported. Putting them
+  # here allows them to be overridden if necessary.
+  # Unlike libtool, we use -rpath here, not --rpath, since the documented
+  # option of GNU ld is called -rpath, not --rpath.
+  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+  case "$host_os" in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+        ld_shlibs=no
+      fi
+      ;;
+    amigaos*)
+      case "$host_cpu" in
+        powerpc)
+          ;;
+        m68k)
+          hardcode_libdir_flag_spec='-L$libdir'
+          hardcode_minus_L=yes
+          ;;
+      esac
+      ;;
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    cygwin* | mingw* | pw32* | cegcc*)
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    haiku*)
+      ;;
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      ;;
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    netbsd*)
+      ;;
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+        ld_shlibs=no
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+          ld_shlibs=no
+          ;;
+        *)
+          if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+            hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+          else
+            ld_shlibs=no
+          fi
+          ;;
+      esac
+      ;;
+    sunos4*)
+      hardcode_direct=yes
+      ;;
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+  esac
+  if test "$ld_shlibs" = no; then
+    hardcode_libdir_flag_spec=
+  fi
+else
+  case "$host_os" in
+    aix3*)
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes; then
+        # Neither direct hardcoding nor static linking is supported with a
+        # broken collect2.
+        hardcode_direct=unsupported
+      fi
+      ;;
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+        # On IA64, the linker does run time linking by default, so we don't
+        # have to do anything special.
+        aix_use_runtimelinking=no
+      else
+        aix_use_runtimelinking=no
+        # Test if we are trying to use run time linking or normal
+        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+        # need to do runtime linking.
+        case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+          for ld_flag in $LDFLAGS; do
+            if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+              aix_use_runtimelinking=yes
+              break
+            fi
+          done
+          ;;
+        esac
+      fi
+      hardcode_direct=yes
+      hardcode_libdir_separator=':'
+      if test "$GCC" = yes; then
+        case $host_os in aix4.[012]|aix4.[012].*)
+          collect2name=`${CC} -print-prog-name=collect2`
+          if test -f "$collect2name" && \
+            strings "$collect2name" | grep resolve_lib_name >/dev/null
+          then
+            # We have reworked collect2
+            :
+          else
+            # We have old collect2
+            hardcode_direct=unsupported
+            hardcode_minus_L=yes
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_libdir_separator=
+          fi
+          ;;
+        esac
+      fi
+      # Begin _LT_AC_SYS_LIBPATH_AIX.
+      echo 'int main () { return 0; }' > conftest.c
+      ${CC} ${LDFLAGS} conftest.c -o conftest
+      aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+      if test -z "$aix_libpath"; then
+        aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+      fi
+      if test -z "$aix_libpath"; then
+        aix_libpath="/usr/lib:/lib"
+      fi
+      rm -f conftest.c conftest
+      # End _LT_AC_SYS_LIBPATH_AIX.
+      if test "$aix_use_runtimelinking" = yes; then
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+      else
+        if test "$host_cpu" = ia64; then
+          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+        else
+          hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        fi
+      fi
+      ;;
+    amigaos*)
+      case "$host_cpu" in
+        powerpc)
+          ;;
+        m68k)
+          hardcode_libdir_flag_spec='-L$libdir'
+          hardcode_minus_L=yes
+          ;;
+      esac
+      ;;
+    bsdi[45]*)
+      ;;
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      libext=lib
+      ;;
+    darwin* | rhapsody*)
+      hardcode_direct=no
+      if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    dgux*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      ;;
+    freebsd2.2*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    freebsd2*)
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      ;;
+    freebsd* | dragonfly*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    hpux9*)
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      ;;
+    hpux10*)
+      if test "$with_gnu_ld" = no; then
+        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator=:
+        hardcode_direct=yes
+        # hardcode_minus_L: Not really in the search PATH,
+        # but as the default location of the library.
+        hardcode_minus_L=yes
+      fi
+      ;;
+    hpux11*)
+      if test "$with_gnu_ld" = no; then
+        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator=:
+        case $host_cpu in
+          hppa*64*|ia64*)
+            hardcode_direct=no
+            ;;
+          *)
+            hardcode_direct=yes
+            # hardcode_minus_L: Not really in the search PATH,
+            # but as the default location of the library.
+            hardcode_minus_L=yes
+            ;;
+        esac
+      fi
+      ;;
+    irix5* | irix6* | nonstopux*)
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    netbsd*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    newsos6)
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    *nto* | *qnx*)
+      ;;
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+        hardcode_direct=yes
+        if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+          hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+        else
+          case "$host_os" in
+            openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+              hardcode_libdir_flag_spec='-R$libdir'
+              ;;
+            *)
+              hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+              ;;
+          esac
+        fi
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      ;;
+    osf3*)
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    osf4* | osf5*)
+      if test "$GCC" = yes; then
+        hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+        # Both cc and cxx compiler support -rpath directly
+        hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      hardcode_libdir_separator=:
+      ;;
+    solaris*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      ;;
+    sunos4*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      ;;
+    sysv4)
+      case $host_vendor in
+        sni)
+          hardcode_direct=yes # is this really true???
+          ;;
+        siemens)
+          hardcode_direct=no
+          ;;
+        motorola)
+          hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+          ;;
+      esac
+      ;;
+    sysv4.3*)
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+        ld_shlibs=yes
+      fi
+      ;;
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      ;;
+    sysv5* | sco3.2v5* | sco5v6*)
+      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator=':'
+      ;;
+    uts4*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      ;;
+    *)
+      ld_shlibs=no
+      ;;
+  esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
+# only about the one the linker finds when passed -lNAME. This is the last
+# element of library_names_spec in libtool.m4, or possibly two of them if the
+# linker has special search rules.
+library_names_spec=      # the last element of library_names_spec in libtool.m4
+libname_spec='lib$name'
+case "$host_os" in
+  aix3*)
+    library_names_spec='$libname.a'
+    ;;
+  aix[4-9]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  amigaos*)
+    case "$host_cpu" in
+      powerpc*)
+        library_names_spec='$libname$shrext' ;;
+      m68k)
+        library_names_spec='$libname.a' ;;
+    esac
+    ;;
+  beos*)
+    library_names_spec='$libname$shrext'
+    ;;
+  bsdi[45]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  cygwin* | mingw* | pw32* | cegcc*)
+    shrext=.dll
+    library_names_spec='$libname.dll.a $libname.lib'
+    ;;
+  darwin* | rhapsody*)
+    shrext=.dylib
+    library_names_spec='$libname$shrext'
+    ;;
+  dgux*)
+    library_names_spec='$libname$shrext'
+    ;;
+  freebsd* | dragonfly*)
+    case "$host_os" in
+      freebsd[123]*)
+        library_names_spec='$libname$shrext$versuffix' ;;
+      *)
+        library_names_spec='$libname$shrext' ;;
+    esac
+    ;;
+  gnu*)
+    library_names_spec='$libname$shrext'
+    ;;
+  haiku*)
+    library_names_spec='$libname$shrext'
+    ;;
+  hpux9* | hpux10* | hpux11*)
+    case $host_cpu in
+      ia64*)
+        shrext=.so
+        ;;
+      hppa*64*)
+        shrext=.sl
+        ;;
+      *)
+        shrext=.sl
+        ;;
+    esac
+    library_names_spec='$libname$shrext'
+    ;;
+  interix[3-9]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  irix5* | irix6* | nonstopux*)
+    library_names_spec='$libname$shrext'
+    case "$host_os" in
+      irix5* | nonstopux*)
+        libsuff= shlibsuff=
+        ;;
+      *)
+        case $LD in
+          *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+          *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
+          *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+          *) libsuff= shlibsuff= ;;
+        esac
+        ;;
+    esac
+    ;;
+  linux*oldld* | linux*aout* | linux*coff*)
+    ;;
+  linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    library_names_spec='$libname$shrext'
+    ;;
+  knetbsd*-gnu)
+    library_names_spec='$libname$shrext'
+    ;;
+  netbsd*)
+    library_names_spec='$libname$shrext'
+    ;;
+  newsos6)
+    library_names_spec='$libname$shrext'
+    ;;
+  *nto* | *qnx*)
+    library_names_spec='$libname$shrext'
+    ;;
+  openbsd*)
+    library_names_spec='$libname$shrext$versuffix'
+    ;;
+  os2*)
+    libname_spec='$name'
+    shrext=.dll
+    library_names_spec='$libname.a'
+    ;;
+  osf3* | osf4* | osf5*)
+    library_names_spec='$libname$shrext'
+    ;;
+  rdos*)
+    ;;
+  solaris*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sunos4*)
+    library_names_spec='$libname$shrext$versuffix'
+    ;;
+  sysv4 | sysv4.3*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sysv4*MP*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+    library_names_spec='$libname$shrext'
+    ;;
+  tpf*)
+    library_names_spec='$libname$shrext'
+    ;;
+  uts4*)
+    library_names_spec='$libname$shrext'
+    ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Format of library name prefix.
+libname_spec="$escaped_libname_spec"
+
+# Library names that the linker finds when passed -lNAME.
+library_names_spec="$escaped_library_names_spec"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
diff --git a/build-aux/config.sub b/build-aux/config.sub
new file mode 100755
index 0000000..7ffe373
--- /dev/null
+++ b/build-aux/config.sub
@@ -0,0 +1,1807 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright 1992-2014 Free Software Foundation, Inc.
+
+timestamp='2014-12-03'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+
+
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright 1992-2014 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray | -microblaze*)
+		os=
+		basic_machine=$1
+		;;
+	-bluegene*)
+		os=-cnk
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+	-chorusrdb)
+		os=-chorusrdb
+		basic_machine=$1
+		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*178)
+		os=-lynxos178
+		;;
+	-lynx*5)
+		os=-lynxos5
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| aarch64 | aarch64_be \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arceb \
+	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+	| avr | avr32 \
+	| be32 | be64 \
+	| bfin \
+	| c4x | c8051 | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| epiphany \
+	| fido | fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| k1om \
+	| le32 | le64 \
+	| lm32 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64octeon | mips64octeonel \
+	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa32r6 | mipsisa32r6el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64r6 | mipsisa64r6el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipsr5900 | mipsr5900el \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| moxie \
+	| mt \
+	| msp430 \
+	| nds32 | nds32le | nds32be \
+	| nios | nios2 | nios2eb | nios2el \
+	| ns16k | ns32k \
+	| open8 | or1k | or1knd | or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle \
+	| pyramid \
+	| riscv32 | riscv64 \
+	| rl78 | rx \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu \
+	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+	| ubicom32 \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+	| visium \
+	| we32k \
+	| x86 | xc16x | xstormy16 | xtensa \
+	| z8k | z80)
+		basic_machine=$basic_machine-unknown
+		;;
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	leon|leon[3-9])
+		basic_machine=sparc-$basic_machine
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
+
+	strongarm | thumb | xscale)
+		basic_machine=arm-unknown
+		;;
+	xgate)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	xscaleeb)
+		basic_machine=armeb-unknown
+		;;
+
+	xscaleel)
+		basic_machine=armel-unknown
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| aarch64-* | aarch64_be-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* | avr32-* \
+	| be32-* | be64-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
+	| c8051-* | clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| k1om-* \
+	| le32-* | le64-* \
+	| lm32-* \
+	| m32c-* | m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| microblaze-* | microblazeel-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64octeon-* | mips64octeonel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa32r6-* | mipsisa32r6el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64r6-* | mipsisa64r6el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipsr5900-* | mipsr5900el-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| mt-* \
+	| msp430-* \
+	| nds32-* | nds32le-* | nds32be-* \
+	| nios-* | nios2-* | nios2eb-* | nios2el-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| open8-* \
+	| or1k*-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+	| pyramid-* \
+	| rl78-* | romp-* | rs6000-* | rx-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+	| tahoe-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile*-* \
+	| tron-* \
+	| ubicom32-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
+	| visium-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* \
+	| xstormy16-* | xtensa*-* \
+	| ymp-* \
+	| z8k-* | z80-*)
+		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
+	c54x-*)
+		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16 | cr16-*)
+		basic_machine=cr16-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	leon-*|leon[3-9]-*)
+		basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
+		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	microblaze*)
+		basic_machine=microblaze-xilinx
+		;;
+	mingw64)
+		basic_machine=x86_64-pc
+		os=-mingw64
+		;;
+	mingw32)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	moxiebox)
+		basic_machine=moxie-unknown
+		os=-moxiebox
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
+	msys)
+		basic_machine=i686-pc
+		os=-msys
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	neo-tandem)
+		basic_machine=neo-tandem
+		;;
+	nse-tandem)
+		basic_machine=nse-tandem
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc | ppcbe)	basic_machine=powerpc-unknown
+		;;
+	ppc-* | ppcbe-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rdos | rdos64)
+		basic_machine=x86_64-pc
+		os=-rdos
+		;;
+	rdos32)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	strongarm-* | thumb-*)
+		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tile*)
+		basic_machine=$basic_machine-unknown
+		os=-linux-gnu
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	xscale-* | xscalee[bl]-*)
+		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+	# First match some system type aliases
+	# that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-auroraux)
+		os=-auroraux
+		;;
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+	      | -sym* | -kopensolaris* | -plan9* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* | -aros* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* | -cegcc* \
+	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-dicos*)
+		os=-dicos
+		;;
+	-nacl*)
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	score-*)
+		os=-elf
+		;;
+	spu-*)
+		os=-elf
+		;;
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+	c4x-* | tic4x-*)
+		os=-coff
+		;;
+	c8051-*)
+		os=-elf
+		;;
+	hexagon-*)
+		os=-elf
+		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mep-*)
+		os=-elf
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-haiku)
+		os=-haiku
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-cnk*|-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/build-aux/depcomp b/build-aux/depcomp
new file mode 100755
index 0000000..fc98710
--- /dev/null
+++ b/build-aux/depcomp
@@ -0,0 +1,791 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2013-05-30.07; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by 'PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputting dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+## Some versions of gcc put a space before the ':'.  On the theory
+## that the space means something, we add a space to the output as
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like '#:fec' to the end of the
+    # dependency line.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
+    echo >> "$depfile"
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  set_dir_from "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\' :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  set_dir_from  "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add 'dependent.h:' lines.
+    sed -ne '2,${
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
+
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
+
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
+
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/'"$tab"'/
+  G
+  p
+}' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for ':'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+  "$@" $dashmflag |
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+        set fnord "$@"
+        shift
+        shift
+        ;;
+    *)
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
+    esac
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/install-sh b/build-aux/install-sh
new file mode 100755
index 0000000..0b0fdcb
--- /dev/null
+++ b/build-aux/install-sh
@@ -0,0 +1,501 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2013-12-25.23; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+tab='	'
+nl='
+'
+IFS=" $tab$nl"
+
+# Set DOITPROG to "echo" to test this script.
+
+doit=${DOITPROG-}
+doit_exec=${doit:-exec}
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+is_target_a_directory=possibly
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
+
+    -o) chowncmd="$chownprog $2"
+        shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        esac
+        shift;;
+
+    -T) is_target_a_directory=never;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --) shift
+        break;;
+
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call 'install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for 'test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      dstdir=`dirname "$dst"`
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+        # Create intermediate dirs using mode 755 as modified by the umask.
+        # This is like FreeBSD 'install' as of 1997-10-28.
+        umask=`umask`
+        case $stripcmd.$umask in
+          # Optimize common cases.
+          *[2367][2367]) mkdir_umask=$umask;;
+          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+          *[0-7])
+            mkdir_umask=`expr $umask + 22 \
+              - $umask % 100 % 40 + $umask % 20 \
+              - $umask % 10 % 4 + $umask % 2
+            `;;
+          *) mkdir_umask=$umask,go-w;;
+        esac
+
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
+
+        posix_mkdir=false
+        case $umask in
+          *[123567][0-7][0-7])
+            # POSIX mkdir -p sets u+wx bits regardless of umask, which
+            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+            ;;
+          *)
+            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+            trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+            if (umask $mkdir_umask &&
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+            then
+              if test -z "$dir_arg" || {
+                   # Check for POSIX incompatibilities with -m.
+                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                   # other-writable bit of parent directory when it shouldn't.
+                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+                   case $ls_ld_tmpdir in
+                     d????-?r-*) different_mode=700;;
+                     d????-?--*) different_mode=755;;
+                     *) false;;
+                   esac &&
+                   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+                     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                   }
+                 }
+              then posix_mkdir=:
+              fi
+              rmdir "$tmpdir/d" "$tmpdir"
+            else
+              # Remove any dirs left behind by ancient mkdir implementations.
+              rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+            fi
+            trap '' 0;;
+        esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+        /*) prefix='/';;
+        [-=\(\)!]*) prefix='./';;
+        *)  prefix='';;
+      esac
+
+      oIFS=$IFS
+      IFS=/
+      set -f
+      set fnord $dstdir
+      shift
+      set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+        test X"$d" = X && continue
+
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask=$mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       set +f &&
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd -f "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
+
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/ltmain.sh b/build-aux/ltmain.sh
new file mode 100644
index 0000000..0f0a2da
--- /dev/null
+++ b/build-aux/ltmain.sh
@@ -0,0 +1,11147 @@
+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+##               by inline-source v2014-01-03.01
+
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.6
+package_revision=2.4.6
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+#   . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
+fi
+
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test set = \"\${$_G_var+set}\"; then
+          save_$_G_var=\$$_G_var
+          $_G_var=C
+	  export $_G_var
+	  _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+	  _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
+	fi"
+done
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp	$nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+    test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+    _G_progs_list=$1
+    _G_check_func=$2
+    _G_PATH=${3-"$PATH"}
+
+    _G_path_prog_max=0
+    _G_path_prog_found=false
+    _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+    for _G_dir in $_G_PATH; do
+      IFS=$_G_save_IFS
+      test -z "$_G_dir" && _G_dir=.
+      for _G_prog_name in $_G_progs_list; do
+        for _exeext in '' .EXE; do
+          _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+          func_executable_p "$_G_path_prog" || continue
+          case `"$_G_path_prog" --version 2>&1` in
+            *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+            *)     $_G_check_func $_G_path_prog
+		   func_path_progs_result=$func_check_prog_result
+		   ;;
+          esac
+          $_G_path_prog_found && break 3
+        done
+      done
+    done
+    IFS=$_G_save_IFS
+    test -z "$func_path_progs_result" && {
+      echo "no acceptable sed could be found in \$PATH" >&2
+      exit 1
+    }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+  _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+  for _G_i in 1 2 3 4 5 6 7; do
+    _G_sed_script=$_G_sed_script$nl$_G_sed_script
+  done
+  echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+  _G_sed_script=
+
+  func_check_prog_sed ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo '' >> conftest.nl
+      "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+  rm -f conftest.sed
+  SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+  func_check_prog_grep ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    _G_path_prog_max=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo 'GREP' >> conftest.nl
+      "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+  GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables.  These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
+
+: ${CP="cp -f"}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+
+
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same.  If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion.  Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'.  '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+  s/$_G_bs4/&\\
+/g
+  s/^$_G_bs2$_G_dollar/$_G_bs&/
+  s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+  s/\n//g"
+
+
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
+
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
+
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+#    debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
+
+# By convention, finish your script with:
+#
+#    exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath=$0
+
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
+
+# Make sure we have an absolute progpath for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
+     progdir=`cd "$progdir" && pwd`
+     progpath=$progdir/$progname
+     ;;
+  *)
+     _G_IFS=$IFS
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS=$_G_IFS
+       test -x "$progdir/$progname" && break
+     done
+     IFS=$_G_IFS
+     test -n "$progdir" || progdir=`pwd`
+     progpath=$progdir/$progname
+     ;;
+esac
+
+
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
+
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
+
+opt_dry_run=false
+opt_quiet=false
+opt_verbose=false
+
+# Categories 'all' and 'none' are always available.  Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
+
+# By default, display warnings according to 'opt_warning_types'.  Set
+# 'warning_func'  to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
+
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
+
+
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
+
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
+
+
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
+{
+    $debug_cmd
+
+    test -t 1 && {
+      # COLORTERM and USE_ANSI_COLORS environment variables take
+      # precedence, because most terminfo databases neglect to describe
+      # whether color sequences are supported.
+      test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+      if test 1 = "$USE_ANSI_COLORS"; then
+        # Standard ANSI escape sequences
+        tc_reset=''
+        tc_bold='';   tc_standout=''
+        tc_red='';   tc_green=''
+        tc_blue='';  tc_cyan=''
+      else
+        # Otherwise trust the terminfo database after all.
+        test -n "`tput sgr0 2>/dev/null`" && {
+          tc_reset=`tput sgr0`
+          test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+          tc_standout=$tc_bold
+          test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+          test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+          test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+          test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+          test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+        }
+      fi
+    }
+
+    require_term_colors=:
+}
+
+
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+  # We should try to minimise forks, especially on Windows where they are
+  # unreasonably slow, so skip the feature probes when bash or zsh are
+  # being used:
+  if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+    : ${_G_HAVE_ARITH_OP="yes"}
+    : ${_G_HAVE_XSI_OPS="yes"}
+    # The += operator was introduced in bash 3.1
+    case $BASH_VERSION in
+      [12].* | 3.0 | 3.0*) ;;
+      *)
+        : ${_G_HAVE_PLUSEQ_OP="yes"}
+        ;;
+    esac
+  fi
+
+  # _G_HAVE_PLUSEQ_OP
+  # Can be empty, in which case the shell is probed, "yes" if += is
+  # useable or anything else if it does not work.
+  test -z "$_G_HAVE_PLUSEQ_OP" \
+    && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+    && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_append ()
+  {
+    $debug_cmd
+
+    eval "$1+=\$2"
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_append ()
+  {
+    $debug_cmd
+
+    eval "$1=\$$1\$2"
+  }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+  eval 'func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1+=\\ \$func_quote_for_eval_result"
+  }'
+else
+  func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1=\$$1\\ \$func_quote_for_eval_result"
+  }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE.  For example:
+#
+#   func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+    $debug_cmd
+
+    eval _G_current_value='`$ECHO $'$1'`'
+    _G_delim=`expr "$2" : '\(.\)'`
+
+    case $_G_delim$_G_current_value$_G_delim in
+      *"$2$_G_delim"*) ;;
+      *) func_append "$@" ;;
+    esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+  test -z "$_G_HAVE_ARITH_OP" \
+    && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+    && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+  eval 'func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=$(( $* ))
+  }'
+else
+  func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=`expr "$@"`
+  }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  # If this shell supports suffix pattern removal, then use it to avoid
+  # forking. Hide the definitions single quotes in case the shell chokes
+  # on unsupported syntax...
+  _b='func_basename_result=${1##*/}'
+  _d='case $1 in
+        */*) func_dirname_result=${1%/*}$2 ;;
+        *  ) func_dirname_result=$3        ;;
+      esac'
+
+else
+  # ...otherwise fall back to using sed.
+  _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+  _d='func_dirname_result=`$ECHO "$1"  |$SED "$sed_dirname"`
+      if test "X$func_dirname_result" = "X$1"; then
+        func_dirname_result=$3
+      else
+        func_append func_dirname_result "$2"
+      fi'
+fi
+
+eval 'func_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+eval 'func_dirname ()
+{
+    $debug_cmd
+
+    '"$_d"'
+}'
+
+
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+    '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    _G_infix=$1; shift
+    _G_indent=$_G_infix
+    _G_prefix="$progname: $_G_infix: "
+    _G_message=$*
+
+    # Strip color escape sequences before counting printable length
+    for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+    do
+      test -n "$_G_tc" && {
+        _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+        _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+      }
+    done
+    _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`"  " ## exclude from sc_prohibit_nested_quotes
+
+    func_echo_infix_1_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_infix_1_IFS
+      $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+      _G_prefix=$_G_indent
+    done
+    IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    func_echo_infix_1 "  $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    $debug_cmd
+
+    func_error "$*"
+    exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $debug_cmd
+
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+  test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=${#1}
+  }'
+else
+  func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+  }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    $debug_cmd
+
+    _G_directory_path=$1
+    _G_dir_list=
+
+    if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+      # Protect directory names starting with '-'
+      case $_G_directory_path in
+        -*) _G_directory_path=./$_G_directory_path ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$_G_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        _G_dir_list=$_G_directory_path:$_G_dir_list
+
+        # If the last portion added has no slash in it, the list is done
+        case $_G_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
+      done
+      _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
+
+      func_mkdir_p_IFS=$IFS; IFS=:
+      for _G_dir in $_G_dir_list; do
+	IFS=$func_mkdir_p_IFS
+        # mkdir can fail with a 'File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$_G_dir" 2>/dev/null || :
+      done
+      IFS=$func_mkdir_p_IFS
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$_G_directory_path" || \
+        func_fatal_error "Failed to create '$1'"
+    fi
+}
+
+
+# func_mktempdir [BASENAME]
+# -------------------------
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, BASENAME is the basename for that directory.
+func_mktempdir ()
+{
+    $debug_cmd
+
+    _G_template=${TMPDIR-/tmp}/${1-$progname}
+
+    if test : = "$opt_dry_run"; then
+      # Return a directory name, but don't create it in dry-run mode
+      _G_tmpdir=$_G_template-$$
+    else
+
+      # If mktemp works, use that first and foremost
+      _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$_G_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        _G_tmpdir=$_G_template-${RANDOM-0}$$
+
+        func_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$_G_tmpdir"
+        umask $func_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$_G_tmpdir" || \
+        func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+    fi
+
+    $ECHO "$_G_tmpdir"
+}
+
+
+# func_normal_abspath PATH
+# ------------------------
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+func_normal_abspath ()
+{
+    $debug_cmd
+
+    # These SED scripts presuppose an absolute path with a trailing slash.
+    _G_pathcar='s|^/\([^/]*\).*$|\1|'
+    _G_pathcdr='s|^/[^/]*||'
+    _G_removedotparts=':dotsl
+		s|/\./|/|g
+		t dotsl
+		s|/\.$|/|'
+    _G_collapseslashes='s|/\{1,\}|/|g'
+    _G_finalslash='s|/*$|/|'
+
+    # Start from root dir and reassemble the path.
+    func_normal_abspath_result=
+    func_normal_abspath_tpath=$1
+    func_normal_abspath_altnamespace=
+    case $func_normal_abspath_tpath in
+      "")
+        # Empty path, that just means $cwd.
+        func_stripname '' '/' "`pwd`"
+        func_normal_abspath_result=$func_stripname_result
+        return
+        ;;
+      # The next three entries are used to spot a run of precisely
+      # two leading slashes without using negated character classes;
+      # we take advantage of case's first-match behaviour.
+      ///*)
+        # Unusual form of absolute path, do nothing.
+        ;;
+      //*)
+        # Not necessarily an ordinary path; POSIX reserves leading '//'
+        # and for example Cygwin uses it to access remote file shares
+        # over CIFS/SMB, so we conserve a leading double slash if found.
+        func_normal_abspath_altnamespace=/
+        ;;
+      /*)
+        # Absolute path, do nothing.
+        ;;
+      *)
+        # Relative path, prepend $cwd.
+        func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+        ;;
+    esac
+
+    # Cancel out all the simple stuff to save iterations.  We also want
+    # the path to end with a slash for ease of parsing, so make sure
+    # there is one (and only one) here.
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+    while :; do
+      # Processed it all yet?
+      if test / = "$func_normal_abspath_tpath"; then
+        # If we ascended to the root using ".." the result may be empty now.
+        if test -z "$func_normal_abspath_result"; then
+          func_normal_abspath_result=/
+        fi
+        break
+      fi
+      func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcar"`
+      func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcdr"`
+      # Figure out what to do with it
+      case $func_normal_abspath_tcomponent in
+        "")
+          # Trailing empty path component, ignore it.
+          ;;
+        ..)
+          # Parent dir; strip last assembled component from result.
+          func_dirname "$func_normal_abspath_result"
+          func_normal_abspath_result=$func_dirname_result
+          ;;
+        *)
+          # Actual path component, append it.
+          func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+          ;;
+      esac
+    done
+    # Restore leading double-slash if one was found on entry.
+    func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
+{
+    $debug_cmd
+
+    $opt_quiet || func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
+{
+    $debug_cmd
+
+    func_relative_path_result=
+    func_normal_abspath "$1"
+    func_relative_path_tlibdir=$func_normal_abspath_result
+    func_normal_abspath "$2"
+    func_relative_path_tbindir=$func_normal_abspath_result
+
+    # Ascend the tree starting from libdir
+    while :; do
+      # check if we have found a prefix of bindir
+      case $func_relative_path_tbindir in
+        $func_relative_path_tlibdir)
+          # found an exact match
+          func_relative_path_tcancelled=
+          break
+          ;;
+        $func_relative_path_tlibdir*)
+          # found a matching prefix
+          func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+          func_relative_path_tcancelled=$func_stripname_result
+          if test -z "$func_relative_path_result"; then
+            func_relative_path_result=.
+          fi
+          break
+          ;;
+        *)
+          func_dirname $func_relative_path_tlibdir
+          func_relative_path_tlibdir=$func_dirname_result
+          if test -z "$func_relative_path_tlibdir"; then
+            # Have to descend all the way to the root!
+            func_relative_path_result=../$func_relative_path_result
+            func_relative_path_tcancelled=$func_relative_path_tbindir
+            break
+          fi
+          func_relative_path_result=../$func_relative_path_result
+          ;;
+      esac
+    done
+
+    # Now calculate path; take care to avoid doubling-up slashes.
+    func_stripname '' '/' "$func_relative_path_result"
+    func_relative_path_result=$func_stripname_result
+    func_stripname '/' '/' "$func_relative_path_tcancelled"
+    if test -n "$func_stripname_result"; then
+      func_append func_relative_path_result "/$func_stripname_result"
+    fi
+
+    # Normalisation. If bindir is libdir, return '.' else relative path.
+    if test -n "$func_relative_path_result"; then
+      func_stripname './' '' "$func_relative_path_result"
+      func_relative_path_result=$func_stripname_result
+    fi
+
+    test -n "$func_relative_path_result" || func_relative_path_result=.
+
+    :
+}
+
+
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+#   i) func_quote_for_eval_result
+#      double-quoted, suitable for a subsequent eval
+#  ii) func_quote_for_eval_unquoted_result
+#      has all characters that are still active within double
+#      quotes backslashified.
+func_quote_for_eval ()
+{
+    $debug_cmd
+
+    func_quote_for_eval_unquoted_result=
+    func_quote_for_eval_result=
+    while test 0 -lt $#; do
+      case $1 in
+        *[\\\`\"\$]*)
+	  _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+        *)
+          _G_unquoted_arg=$1 ;;
+      esac
+      if test -n "$func_quote_for_eval_unquoted_result"; then
+	func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+      else
+        func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+      fi
+
+      case $_G_unquoted_arg in
+        # Double-quote args containing shell metacharacters to delay
+        # word splitting, command substitution and variable expansion
+        # for a subsequent eval.
+        # Many Bourne shells cannot handle close brackets correctly
+        # in scan sets, so we specify it separately.
+        *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+          _G_quoted_arg=\"$_G_unquoted_arg\"
+          ;;
+        *)
+          _G_quoted_arg=$_G_unquoted_arg
+	  ;;
+      esac
+
+      if test -n "$func_quote_for_eval_result"; then
+	func_append func_quote_for_eval_result " $_G_quoted_arg"
+      else
+        func_append func_quote_for_eval_result "$_G_quoted_arg"
+      fi
+      shift
+    done
+}
+
+
+# func_quote_for_expand ARG
+# -------------------------
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    $debug_cmd
+
+    case $1 in
+      *[\\\`\"]*)
+	_G_arg=`$ECHO "$1" | $SED \
+	    -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        _G_arg=$1 ;;
+    esac
+
+    case $_G_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        _G_arg=\"$_G_arg\"
+        ;;
+    esac
+
+    func_quote_for_expand_result=$_G_arg
+}
+
+
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_stripname ()
+  {
+    $debug_cmd
+
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary variable first.
+    func_stripname_result=$3
+    func_stripname_result=${func_stripname_result#"$1"}
+    func_stripname_result=${func_stripname_result%"$2"}
+  }'
+else
+  func_stripname ()
+  {
+    $debug_cmd
+
+    case $2 in
+      .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+      *)  func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+    esac
+  }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    $debug_cmd
+
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
+
+    func_quote_for_expand "$_G_cmd"
+    eval "func_notquiet $func_quote_for_expand_result"
+
+    $opt_dry_run || {
+      eval "$_G_cmd"
+      _G_status=$?
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
+      fi
+    }
+}
+
+
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    $debug_cmd
+
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
+
+    $opt_quiet || {
+      func_quote_for_expand "$_G_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    $opt_dry_run || {
+      eval "$_G_user_locale
+	    $_G_cmd"
+      _G_status=$?
+      eval "$_G_safe_locale"
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
+      fi
+    }
+}
+
+
+# func_tr_sh
+# ----------
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+    $debug_cmd
+
+    case $1 in
+    [0-9]* | *[!a-zA-Z0-9_]*)
+      func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+      ;;
+    * )
+      func_tr_sh_result=$1
+      ;;
+    esac
+}
+
+
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $debug_cmd
+
+    $opt_verbose && func_echo "$*"
+
+    :
+}
+
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
+}
+
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+    $debug_cmd
+
+    # CATEGORY must be in the warning_categories list!
+    case " $warning_categories " in
+      *" $1 "*) ;;
+      *) func_internal_error "invalid warning category '$1'" ;;
+    esac
+
+    _G_category=$1
+    shift
+
+    case " $opt_warning_types " in
+      *" $_G_category "*) $warning_func ${1+"$@"} ;;
+    esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+    $debug_cmd
+
+    printf '%s\n%s\n' "$1" "$2" \
+      | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false.  Use it like this:
+#
+#  func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+    $debug_cmd
+
+    test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2014-01-07.03; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+#   #!/bin/sh
+#   . relative/path/to/funclib.sh
+#   . relative/path/to/options-parser
+#   scriptversion=1.0
+#   func_options ${1+"$@"}
+#   eval set dummy "$func_options_result"; shift
+#   ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'.  Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+       --debug        enable verbose shell tracing
+   -W, --warnings=CATEGORY
+                      report the warnings falling in CATEGORY [all]
+   -v, --verbose      verbosely report processing
+       --version      print version information and exit
+   -h, --help         print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+       'all'          show all warnings
+       'none'         turn off all the warnings
+       'error'        warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code.  A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+    $debug_cmd
+
+    func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns.  FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not accept hook functions." ;;
+    esac
+
+    eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+    $debug_cmd
+
+    eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+    esac
+
+    eval _G_hook_fns=\$$1_hooks; shift
+
+    for _G_hook in $_G_hook_fns; do
+      eval $_G_hook '"$@"'
+
+      # store returned options list back into positional
+      # parameters for next 'cmd' execution.
+      eval _G_hook_result=\$${_G_hook}_result
+      eval set dummy "$_G_hook_result"; shift
+    done
+
+    func_quote_for_eval ${1+"$@"}
+    func_run_hooks_result=$func_quote_for_eval_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, remove any
+# options that you action, and then pass back the remaining unprocessed
+# options in '<hooked_function_name>_result', escaped suitably for
+# 'eval'.  Like this:
+#
+#    my_options_prep ()
+#    {
+#        $debug_cmd
+#
+#        # Extend the existing usage message.
+#        usage_message=$usage_message'
+#      -s, --silent       don'\''t print informational messages
+#    '
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_options_prep_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_options_prep my_options_prep
+#
+#
+#    my_silent_option ()
+#    {
+#        $debug_cmd
+#
+#        # Note that for efficiency, we parse as many options as we can
+#        # recognise in a loop before passing the remainder back to the
+#        # caller on the first unrecognised argument we encounter.
+#        while test $# -gt 0; do
+#          opt=$1; shift
+#          case $opt in
+#            --silent|-s) opt_silent=: ;;
+#            # Separate non-argument short options:
+#            -s*)         func_split_short_opt "$_G_opt"
+#                         set dummy "$func_split_short_opt_name" \
+#                             "-$func_split_short_opt_arg" ${1+"$@"}
+#                         shift
+#                         ;;
+#            *)            set dummy "$_G_opt" "$*"; shift; break ;;
+#          esac
+#        done
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_silent_option_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_parse_options my_silent_option
+#
+#
+#    my_option_validation ()
+#    {
+#        $debug_cmd
+#
+#        $opt_silent && $opt_verbose && func_fatal_help "\
+#    '--silent' and '--verbose' options are mutually exclusive."
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_option_validation_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_validate_options my_option_validation
+#
+# You'll alse need to manually amend $usage_message to reflect the extra
+# options you parse.  It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+    $debug_cmd
+
+    func_options_prep ${1+"$@"}
+    eval func_parse_options \
+        ${func_options_prep_result+"$func_options_prep_result"}
+    eval func_validate_options \
+        ${func_parse_options_result+"$func_parse_options_result"}
+
+    eval func_run_hooks func_options \
+        ${func_validate_options_result+"$func_validate_options_result"}
+
+    # save modified positional parameters for caller
+    func_options_result=$func_run_hooks_result
+}
+
+
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters.  If a hook function modifies that list, and
+# needs to propogate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning.
+func_hookable func_options_prep
+func_options_prep ()
+{
+    $debug_cmd
+
+    # Option defaults:
+    opt_verbose=false
+    opt_warning_types=
+
+    func_run_hooks func_options_prep ${1+"$@"}
+
+    # save modified positional parameters for caller
+    func_options_prep_result=$func_run_hooks_result
+}
+
+
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
+{
+    $debug_cmd
+
+    func_parse_options_result=
+
+    # this just eases exit handling
+    while test $# -gt 0; do
+      # Defer to hook functions for initial option parsing, so they
+      # get priority in the event of reusing an option name.
+      func_run_hooks func_parse_options ${1+"$@"}
+
+      # Adjust func_parse_options positional parameters to match
+      eval set dummy "$func_run_hooks_result"; shift
+
+      # Break out of the loop if we already parsed every option.
+      test $# -gt 0 || break
+
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --debug|-x)   debug_cmd='set -x'
+                      func_echo "enabling shell trace mode"
+                      $debug_cmd
+                      ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                      set dummy --warnings none ${1+"$@"}
+                      shift
+		      ;;
+
+        --warnings|--warning|-W)
+                      test $# = 0 && func_missing_arg $_G_opt && break
+                      case " $warning_categories $1" in
+                        *" $1 "*)
+                          # trailing space prevents matching last $1 above
+                          func_append_uniq opt_warning_types " $1"
+                          ;;
+                        *all)
+                          opt_warning_types=$warning_categories
+                          ;;
+                        *none)
+                          opt_warning_types=none
+                          warning_func=:
+                          ;;
+                        *error)
+                          opt_warning_types=$warning_categories
+                          warning_func=func_fatal_error
+                          ;;
+                        *)
+                          func_fatal_error \
+                             "unsupported warning category: '$1'"
+                          ;;
+                      esac
+                      shift
+                      ;;
+
+        --verbose|-v) opt_verbose=: ;;
+        --version)    func_version ;;
+        -\?|-h)       func_usage ;;
+        --help)       func_help ;;
+
+	# Separate optargs to long options (plugins may need this):
+	--*=*)        func_split_equals "$_G_opt"
+	              set dummy "$func_split_equals_lhs" \
+                          "$func_split_equals_rhs" ${1+"$@"}
+                      shift
+                      ;;
+
+       # Separate optargs to short options:
+        -W*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        # Separate non-argument short options:
+        -\?*|-h*|-v*|-x*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "-$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        --)           break ;;
+        -*)           func_fatal_help "unrecognised option: '$_G_opt'" ;;
+        *)            set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+      esac
+    done
+
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    func_parse_options_result=$func_quote_for_eval_result
+}
+
+
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
+{
+    $debug_cmd
+
+    # Display all warnings if -W was not given.
+    test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+
+    func_run_hooks func_validate_options ${1+"$@"}
+
+    # Bail if the options were screwed!
+    $exit_cmd $EXIT_FAILURE
+
+    # save modified positional parameters for caller
+    func_validate_options_result=$func_run_hooks_result
+}
+
+
+
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
+
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    $debug_cmd
+
+    eval \$ECHO \""Usage: $usage"\"
+    eval \$ECHO \""$fatal_help"\"
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
+func_help ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "$long_help_message"
+    exit 0
+}
+
+
+# func_missing_arg ARGNAME
+# ------------------------
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    $debug_cmd
+
+    func_error "Missing argument for '$1'."
+    exit_cmd=exit
+}
+
+
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=${1%%=*}
+      func_split_equals_rhs=${1#*=}
+      test "x$func_split_equals_lhs" = "x$1" \
+        && func_split_equals_rhs=
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+      func_split_equals_rhs=
+      test "x$func_split_equals_lhs" = "x$1" \
+        || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+  }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_arg=${1#??}
+      func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
+      func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+  }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+    exit 0
+}
+
+
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
+{
+    $debug_cmd
+
+    eval \$ECHO \""Usage: $usage"\"
+    echo
+    $SED -n 's|^# ||
+        /^Written by/{
+          x;p;x
+        }
+	h
+	/^Written by/q' < "$progpath"
+    echo
+    eval \$ECHO \""$usage_message"\"
+}
+
+
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $debug_cmd
+
+    printf '%s\n' "$progname $scriptversion"
+    $SED -n '
+        /(C)/!b go
+        :more
+        /\./!{
+          N
+          s|\n# | |
+          b more
+        }
+        :go
+        /^# Written by /,/# warranty; / {
+          s|^# ||
+          s|^# *$||
+          s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+          p
+        }
+        /^# Written by / {
+          s|^# ||
+          p
+        }
+        /^warranty; /q' < "$progpath"
+
+    exit $?
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
+
+
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
+{
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
+
+
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
+{
+    $debug_cmd
+
+    $warning_func ${1+"$@"}
+}
+
+
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+       --config             show all configuration variables
+       --debug              enable verbose shell tracing
+   -n, --dry-run            display commands without modifying any files
+       --features           display basic configuration information and exit
+       --mode=MODE          use operation mode MODE
+       --no-warnings        equivalent to '-Wnone'
+       --preserve-dup-deps  don't remove duplicate dependency libraries
+       --quiet, --silent    don't print informational messages
+       --tag=TAG            use configuration variables from tag TAG
+   -v, --verbose            print more informational messages than default
+       --version            print version information
+   -W, --warnings=CATEGORY  report the warnings falling in CATEGORY [all]
+   -h, --help, --help-all   print short, long, or detailed help message
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+       clean           remove files from the build directory
+       compile         compile a source file into a libtool object
+       execute         automatically set library path, then run a program
+       finish          complete the installation of libtool libraries
+       install         install libraries or executables
+       link            create a library or an executable
+       uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+       host-triplet:   $host
+       shell:          $SHELL
+       compiler:       $LTCC
+       compiler flags: $LTCFLAGS
+       linker:         $LD (gnu? $with_gnu_ld)
+       version:        $progname (GNU libtool) 2.4.6
+       automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+       autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+    exit 0
+}
+
+
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_lo2o ()
+  {
+    case $1 in
+      *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+      *   ) func_lo2o_result=$1               ;;
+    esac
+  }'
+
+  # func_xform LIBOBJ-OR-SOURCE
+  # ---------------------------
+  # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+  # suffix to a '.lo' libtool-object suffix.
+  eval 'func_xform ()
+  {
+    func_xform_result=${1%.*}.lo
+  }'
+else
+  # ...otherwise fall back to using sed.
+  func_lo2o ()
+  {
+    func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+  }
+
+  func_xform ()
+  {
+    func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+  }
+fi
+
+
+# func_fatal_configuration ARG...
+# -------------------------------
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+    func__fatal_error ${1+"$@"} \
+      "See the $PACKAGE documentation for more information." \
+      "Fatal configuration error."
+}
+
+
+# func_config
+# -----------
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
+
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+    done
+
+    exit $?
+}
+
+
+# func_features
+# -------------
+# Display the features supported by this script.
+func_features ()
+{
+    echo "host: $host"
+    if test yes = "$build_libtool_libs"; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test yes = "$build_old_libs"; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+
+    exit $?
+}
+
+
+# func_enable_tag TAGNAME
+# -----------------------
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+    # Global variable:
+    tagname=$1
+
+    re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+    re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+    sed_extractcf=/$re_begincf/,/$re_endcf/p
+
+    # Validate tagname.
+    case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+        func_fatal_error "invalid tag name: $tagname"
+        ;;
+    esac
+
+    # Don't test for the "default" C tag, as we know it's
+    # there but not specially marked.
+    case $tagname in
+        CC) ;;
+    *)
+        if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	  taglist="$taglist $tagname"
+
+	  # Evaluate the configuration.  Be careful to quote the path
+	  # and the sed script, to avoid splitting on whitespace, but
+	  # also don't use non-portable quotes within backquotes within
+	  # quotes we have to do it in 2 steps:
+	  extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	  eval "$extractedcf"
+        else
+	  func_error "ignoring unknown tag $tagname"
+        fi
+        ;;
+    esac
+}
+
+
+# func_check_version_match
+# ------------------------
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+    if test "$package_revision" != "$macro_revision"; then
+      if test "$VERSION" != "$macro_version"; then
+        if test -z "$macro_version"; then
+          cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+        else
+          cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+        fi
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+      fi
+
+      exit $EXIT_MISMATCH
+    fi
+}
+
+
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
+{
+    $debug_mode
+
+    # Option defaults:
+    opt_config=false
+    opt_dlopen=
+    opt_dry_run=false
+    opt_help=false
+    opt_mode=
+    opt_preserve_dup_deps=false
+    opt_quiet=false
+
+    nonopt=
+    preserve_args=
+
+    # Shorthand for --mode=foo, only valid as the first argument
+    case $1 in
+    clean|clea|cle|cl)
+      shift; set dummy --mode clean ${1+"$@"}; shift
+      ;;
+    compile|compil|compi|comp|com|co|c)
+      shift; set dummy --mode compile ${1+"$@"}; shift
+      ;;
+    execute|execut|execu|exec|exe|ex|e)
+      shift; set dummy --mode execute ${1+"$@"}; shift
+      ;;
+    finish|finis|fini|fin|fi|f)
+      shift; set dummy --mode finish ${1+"$@"}; shift
+      ;;
+    install|instal|insta|inst|ins|in|i)
+      shift; set dummy --mode install ${1+"$@"}; shift
+      ;;
+    link|lin|li|l)
+      shift; set dummy --mode link ${1+"$@"}; shift
+      ;;
+    uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+      shift; set dummy --mode uninstall ${1+"$@"}; shift
+      ;;
+    esac
+
+    # Pass back the list of options.
+    func_quote_for_eval ${1+"$@"}
+    libtool_options_prep_result=$func_quote_for_eval_result
+}
+func_add_hook func_options_prep libtool_options_prep
+
+
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
+{
+    $debug_cmd
+
+    # Perform our own loop to consume as many options as possible in
+    # each iteration.
+    while test $# -gt 0; do
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --dry-run|--dryrun|-n)
+                        opt_dry_run=:
+                        ;;
+
+        --config)       func_config ;;
+
+        --dlopen|-dlopen)
+                        opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+                        shift
+                        ;;
+
+        --preserve-dup-deps)
+                        opt_preserve_dup_deps=: ;;
+
+        --features)     func_features ;;
+
+        --finish)       set dummy --mode finish ${1+"$@"}; shift ;;
+
+        --help)         opt_help=: ;;
+
+        --help-all)     opt_help=': help-all' ;;
+
+        --mode)         test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_mode=$1
+                        case $1 in
+                          # Valid mode arguments:
+                          clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+                          # Catch anything else as an error
+                          *) func_error "invalid argument for $_G_opt"
+                             exit_cmd=exit
+                             break
+                             ;;
+                        esac
+                        shift
+                        ;;
+
+        --no-silent|--no-quiet)
+                        opt_quiet=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                        opt_warning=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-verbose)
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --silent|--quiet)
+                        opt_quiet=:
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --tag)          test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_tag=$1
+                        func_append preserve_args " $_G_opt $1"
+                        func_enable_tag "$1"
+                        shift
+                        ;;
+
+        --verbose|-v)   opt_quiet=false
+                        opt_verbose=:
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+	# An option not handled by this hook function:
+        *)		set dummy "$_G_opt" ${1+"$@"};	shift; break  ;;
+      esac
+    done
+
+
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    libtool_parse_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_parse_options libtool_parse_options
+
+
+
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+    # save first non-option argument
+    if test 0 -lt $#; then
+      nonopt=$1
+      shift
+    fi
+
+    # preserve --debug
+    test : = "$debug_cmd" || func_append preserve_args " --debug"
+
+    case $host in
+      # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+      # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+      *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+        # don't eliminate duplications in $postdeps and $predeps
+        opt_duplicate_compiler_generated_deps=:
+        ;;
+      *)
+        opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+        ;;
+    esac
+
+    $opt_help || {
+      # Sanity checks first:
+      func_check_version_match
+
+      test yes != "$build_libtool_libs" \
+        && test yes != "$build_old_libs" \
+        && func_fatal_configuration "not configured to build any kind of library"
+
+      # Darwin sucks
+      eval std_shrext=\"$shrext_cmds\"
+
+      # Only execute mode is allowed to have -dlopen flags.
+      if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+        func_error "unrecognized option '-dlopen'"
+        $ECHO "$help" 1>&2
+        exit $EXIT_FAILURE
+      fi
+
+      # Change the help message to a mode-specific one.
+      generic_help=$help
+      help="Try '$progname --help --mode=$opt_mode' for more information."
+    }
+
+    # Pass back the unparsed argument list
+    func_quote_for_eval ${1+"$@"}
+    libtool_validate_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_validate_options libtool_validate_options
+
+
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
+
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+  $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if 'file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case $lalib_p_line in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test yes = "$lalib_p"
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    test -f "$1" &&
+      $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_dirname_and_basename "$1" "" "."
+    func_stripname '' '.exe' "$func_basename_result"
+    func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $debug_cmd
+
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$sp$nl
+      eval cmd=\"$cmd\"
+      IFS=$save_ifs
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# 'FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $debug_cmd
+
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot.  Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+  func_resolve_sysroot_result=$1
+  case $func_resolve_sysroot_result in
+  =*)
+    func_stripname '=' '' "$func_resolve_sysroot_result"
+    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+    ;;
+  esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+  case $lt_sysroot:$1 in
+  ?*:"$lt_sysroot"*)
+    func_stripname "$lt_sysroot" '' "$1"
+    func_replace_sysroot_result='='$func_stripname_result
+    ;;
+  *)
+    # Including no sysroot.
+    func_replace_sysroot_result=$1
+    ;;
+  esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $debug_cmd
+
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	func_append_quoted CC_quoted "$arg"
+      done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_append_quoted CC_quoted "$arg"
+	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
+	    case "$@ " in
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with '--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=$1
+    if test yes = "$build_libtool_libs"; then
+      write_lobj=\'$2\'
+    else
+      write_lobj=none
+    fi
+
+    if test yes = "$build_old_libs"; then
+      write_oldobj=\'$3\'
+    else
+      write_oldobj=none
+    fi
+
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+      $MV "${write_libobj}T" "$write_libobj"
+    }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+  $debug_cmd
+
+  func_convert_core_file_wine_to_w32_result=$1
+  if test -n "$1"; then
+    # Unfortunately, winepath does not exit with a non-zero error code, so we
+    # are forced to check the contents of stdout. On the other hand, if the
+    # command is not found, the shell will set an exit code of 127 and print
+    # *an error message* to stdout. So we must check for both error code of
+    # zero AND non-empty stdout, which explains the odd construction:
+    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+    if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
+      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+        $SED -e "$sed_naive_backslashify"`
+    else
+      func_convert_core_file_wine_to_w32_result=
+    fi
+  fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+  $debug_cmd
+
+  # unfortunately, winepath doesn't convert paths, only file names
+  func_convert_core_path_wine_to_w32_result=
+  if test -n "$1"; then
+    oldIFS=$IFS
+    IFS=:
+    for func_convert_core_path_wine_to_w32_f in $1; do
+      IFS=$oldIFS
+      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+      if test -n "$func_convert_core_file_wine_to_w32_result"; then
+        if test -z "$func_convert_core_path_wine_to_w32_result"; then
+          func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
+        else
+          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+        fi
+      fi
+    done
+    IFS=$oldIFS
+  fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+  $debug_cmd
+
+  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+    if test "$?" -ne 0; then
+      # on failure, ensure result is empty
+      func_cygpath_result=
+    fi
+  else
+    func_cygpath_result=
+    func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
+  fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format.  Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+  $debug_cmd
+
+  # awkward: cmd appends spaces to result
+  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+    $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+  $debug_cmd
+
+  if test -z "$2" && test -n "$1"; then
+    func_error "Could not determine host file name corresponding to"
+    func_error "  '$1'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback:
+    func_to_host_file_result=$1
+  fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+  $debug_cmd
+
+  if test -z "$4" && test -n "$3"; then
+    func_error "Could not determine the host path corresponding to"
+    func_error "  '$3'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback.  This is a deliberately simplistic "conversion" and
+    # should not be "improved".  See libtool.info.
+    if test "x$1" != "x$2"; then
+      lt_replace_pathsep_chars="s|$1|$2|g"
+      func_to_host_path_result=`echo "$3" |
+        $SED -e "$lt_replace_pathsep_chars"`
+    else
+      func_to_host_path_result=$3
+    fi
+  fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+  $debug_cmd
+
+  case $4 in
+  $1 ) func_to_host_path_result=$3$func_to_host_path_result
+    ;;
+  esac
+  case $4 in
+  $2 ) func_append func_to_host_path_result "$3"
+    ;;
+  esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via '$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+  $debug_cmd
+
+  $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result.  If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+  $debug_cmd
+
+  case ,$2, in
+    *,"$to_tool_file_cmd",*)
+      func_to_tool_file_result=$1
+      ;;
+    *)
+      $to_tool_file_cmd "$1"
+      func_to_tool_file_result=$func_to_host_file_result
+      ;;
+  esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+  func_to_host_file_result=$1
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_to_host_file_result=$func_convert_core_msys_to_w32_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+    # LT_CYGPATH in this case.
+    func_to_host_file_result=`cygpath -m "$1"`
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format.  Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_file_wine_to_w32 "$1"
+    func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result=$func_cygpath_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+    func_convert_core_file_wine_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result=$func_cygpath_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via '$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format.  If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+#   file name conversion function    : func_convert_file_X_to_Y ()
+#   path conversion function         : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same.  If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+  $debug_cmd
+
+  if test -z "$to_host_path_cmd"; then
+    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+    to_host_path_cmd=func_convert_path_$func_stripname_result
+  fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+  $debug_cmd
+
+  func_init_to_host_path_cmd
+  $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+  func_to_host_path_result=$1
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from ARG.  MSYS
+    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+    # and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result=$func_convert_core_msys_to_w32_result
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format.  Requires a wine environment and
+# a working winepath.  Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result=$func_cygpath_result
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from
+    # ARG. msys behavior is inconsistent here, cygpath turns them
+    # into '.;' and ';.', and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result=$func_cygpath_result
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+  $debug_cmd
+
+  func_dll_def_p_tmp=`$SED -n \
+    -e 's/^[	 ]*//' \
+    -e '/^\(;.*\)*$/d' \
+    -e 's/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p' \
+    -e q \
+    "$1"`
+  test DEF = "$func_dll_def_p_tmp"
+}
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $debug_cmd
+
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile=$nonopt  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+    pie_flag=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg=$arg
+	arg_mode=normal
+	;;
+
+      target )
+	libobj=$arg
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify '-o' more than once"
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-pie | -fpie | -fPIE)
+          func_append pie_flag " $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
+	  func_append later " $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
+	  lastarg=
+	  save_ifs=$IFS; IFS=,
+	  for arg in $args; do
+	    IFS=$save_ifs
+	    func_append_quoted lastarg "$arg"
+	  done
+	  IFS=$save_ifs
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
+
+	  # Add the arguments to base_compile.
+	  func_append base_compile " $lastarg"
+	  continue
+	  ;;
+
+	*)
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg=$srcfile
+	  srcfile=$arg
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      func_append_quoted base_compile "$lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      func_fatal_error "you must specify an argument for -Xcompile"
+      ;;
+    target)
+      func_fatal_error "you must specify a target with '-o'"
+      ;;
+    *)
+      # Get the name of the library object.
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj=$func_basename_result
+      }
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    case $libobj in
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
+    esac
+
+    case $libobj in
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+    *)
+      func_fatal_error "cannot determine name of library object from '$libobj'"
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -shared)
+	test yes = "$build_libtool_libs" \
+	  || func_fatal_configuration "cannot build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
+      -static)
+	build_libtool_libs=no
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name '$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname=$func_basename_result
+    xdir=$func_dirname_result
+    lobj=$xdir$objdir/$objname
+
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
+
+    # Delete any leftover library objects.
+    if test yes = "$build_old_libs"; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
+      pic_mode=default
+      ;;
+    esac
+    if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test no = "$compiler_c_o"; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+      lockfile=$output_obj.lock
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test yes = "$need_locks"; then
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test warn = "$need_locks"; then
+      if test -f "$lockfile"; then
+	$ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+      func_append removelist " $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
+    fi
+
+    $opt_dry_run || $RM $removelist
+    func_append removelist " $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+    srcfile=$func_to_tool_file_result
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test yes = "$build_libtool_libs"; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test no != "$pic_mode"; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      func_mkdir_p "$xdir$objdir"
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	func_append command " -o $lobj"
+      fi
+
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+      if test warn = "$need_locks" &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+
+      # Allow error messages only from the first compilation.
+      if test yes = "$suppress_opt"; then
+	suppress_output=' >/dev/null 2>&1'
+      fi
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test yes = "$build_old_libs"; then
+      if test yes != "$pic_mode"; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile$pie_flag"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test yes = "$compiler_c_o"; then
+	func_append command " -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      func_append command "$suppress_output"
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+      if test warn = "$need_locks" &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test no != "$need_locks"; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+  test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $opt_mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
+  -shared           do not build a '.o' file suitable for static linking
+  -static           only build a '.o' file suitable for static linking
+  -Wc,FLAG          pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to '-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the '--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the 'install' or 'cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
+  -dlopen FILE      '-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  use a list of object files found in FILE to specify objects
+  -os2dllname NAME  force a short DLL name on OS/2 (no effect on other OSes)
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with '-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in '.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
+
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode '$opt_mode'"
+        ;;
+    esac
+
+    echo
+    $ECHO "Try '$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test : = "$opt_help"; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | $SED -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    $SED '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $debug_cmd
+
+    # The first argument is the command name.
+    cmd=$nonopt
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $opt_dlopen; do
+      test -f "$file" \
+	|| func_fatal_help "'$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "'$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "'$file' was not linked with '-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir=$func_dirname_result
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  func_append dir "/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
+	  fi
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir=$func_dirname_result
+	;;
+
+      *)
+	func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir=$absdir
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic=$magic
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -* | *.la | *.lo ) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file=$progdir/$program
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file=$progdir/$program
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_append_quoted args "$file"
+    done
+
+    if $opt_dry_run; then
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    else
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd=\$cmd$args
+    fi
+}
+
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $debug_cmd
+
+    libs=
+    libdirs=
+    admincmds=
+
+    for opt in "$nonopt" ${1+"$@"}
+    do
+      if test -d "$opt"; then
+	func_append libdirs " $opt"
+
+      elif test -f "$opt"; then
+	if func_lalib_unsafe_p "$opt"; then
+	  func_append libs " $opt"
+	else
+	  func_warning "'$opt' is not a valid libtool archive"
+	fi
+
+      else
+	func_fatal_error "invalid argument '$opt'"
+      fi
+    done
+
+    if test -n "$libs"; then
+      if test -n "$lt_sysroot"; then
+        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+      else
+        sysroot_cmd=
+      fi
+
+      # Remove sysroot references
+      if $opt_dry_run; then
+        for lib in $libs; do
+          echo "removing references to $lt_sysroot and '=' prefixes from $lib"
+        done
+      else
+        tmpdir=`func_mktempdir`
+        for lib in $libs; do
+	  $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	    > $tmpdir/tmp-la
+	  mv -f $tmpdir/tmp-la $lib
+	done
+        ${RM}r "$tmpdir"
+      fi
+    fi
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || func_append admincmds "
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    $opt_quiet && exit $EXIT_SUCCESS
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      echo "----------------------------------------------------------------------"
+      echo "Libraries have been installed in:"
+      for libdir in $libdirs; do
+	$ECHO "   $libdir"
+      done
+      echo
+      echo "If you ever happen to want to link against installed libraries"
+      echo "in a given directory, LIBDIR, you must either use libtool, and"
+      echo "specify the full pathname of the library, or use the '-LLIBDIR'"
+      echo "flag during linking and do at least one of the following:"
+      if test -n "$shlibpath_var"; then
+	echo "   - add LIBDIR to the '$shlibpath_var' environment variable"
+	echo "     during execution"
+      fi
+      if test -n "$runpath_var"; then
+	echo "   - add LIBDIR to the '$runpath_var' environment variable"
+	echo "     during linking"
+      fi
+      if test -n "$hardcode_libdir_flag_spec"; then
+	libdir=LIBDIR
+	eval flag=\"$hardcode_libdir_flag_spec\"
+
+	$ECHO "   - use the '$flag' linker flag"
+      fi
+      if test -n "$admincmds"; then
+	$ECHO "   - have your system administrator run these commands:$admincmds"
+      fi
+      if test -f /etc/ld.so.conf; then
+	echo "   - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
+      fi
+      echo
+
+      echo "See any operating system documentation about shared libraries for"
+      case $host in
+	solaris2.[6789]|solaris2.1[0-9])
+	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	  echo "pages."
+	  ;;
+	*)
+	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
+	  ;;
+      esac
+      echo "----------------------------------------------------------------------"
+    fi
+    exit $EXIT_SUCCESS
+}
+
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $debug_cmd
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
+       # Allow the use of GNU shtool's install command.
+       case $nonopt in *shtool*) :;; *) false;; esac
+    then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    func_append install_prog "$func_quote_for_eval_result"
+    install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=false
+    stripme=
+    no_mode=:
+    for arg
+    do
+      arg2=
+      if test -n "$dest"; then
+	func_append files " $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=: ;;
+      -f)
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  if test X-m = "X$prev" && test -n "$install_override_mode"; then
+	    arg2=$install_override_mode
+	    no_mode=false
+	  fi
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      func_append install_prog " $func_quote_for_eval_result"
+      if test -n "$arg2"; then
+	func_quote_for_eval "$arg2"
+      fi
+      func_append install_shared_prog " $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the '$prev' option requires an argument"
+
+    if test -n "$install_override_mode" && $no_mode; then
+      if $install_cp; then :; else
+	func_quote_for_eval "$install_override_mode"
+	func_append install_shared_prog " -m $func_quote_for_eval_result"
+      fi
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=:
+    if $isdir; then
+      destdir=$dest
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir=$func_dirname_result
+      destname=$func_basename_result
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "'$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "'$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic=$magic
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	func_append staticlibs " $file"
+	;;
+
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "'$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append current_libdirs " $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append future_libdirs " $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir=$func_dirname_result
+	func_append dir "$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking '$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname=$1
+	  shift
+
+	  srcname=$realname
+	  test -n "$relink_command" && srcname=${realname}T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme=$stripme
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=
+	      ;;
+	    esac
+	    ;;
+	  os2*)
+	    case $realname in
+	    *_dll.a)
+	      tstripme=
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try 'ln -sf' first, because the 'ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib=$destdir/$realname
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name=$func_basename_result
+	instname=$dir/${name}i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile=$destdir/$destname
+	else
+	  func_basename "$file"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest=$destfile
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to '$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test yes = "$build_old_libs"; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile=$destdir/$destname
+	else
+	  func_basename "$file"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=.exe
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script '$wrapper'"
+
+	  finalize=:
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "'$lib' has not been installed in '$libdir'"
+	      finalize=false
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test no = "$fast_install" && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if $finalize; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file=$func_basename_result
+	        outputname=$tmpdir/$file
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_quiet || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink '$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file=$outputname
+	      else
+	        func_warning "cannot relink '$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name=$func_basename_result
+
+      # Set up the ranlib parameters.
+      oldlib=$destdir/$name
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run '$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $debug_cmd
+
+    my_outputname=$1
+    my_originator=$2
+    my_pic_p=${3-false}
+    my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms=${my_outputname}S.c
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist=$output_objdir/$my_outputname.nm
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test yes = "$dlself"; then
+	  func_verbose "generating symbol list for '$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+	    func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
+	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols=$output_objdir/$outputname.exp
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin* | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from '$dlprefile'"
+	  func_basename "$dlprefile"
+	  name=$func_basename_result
+          case $host in
+	    *cygwin* | *mingw* | *cegcc* )
+	      # if an import library, we need to obtain dlname
+	      if func_win32_import_lib_p "$dlprefile"; then
+	        func_tr_sh "$dlprefile"
+	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
+	        dlprefile_dlbasename=
+	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+	          # Use subshell, to avoid clobbering current variable values
+	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+	          if test -n "$dlprefile_dlname"; then
+	            func_basename "$dlprefile_dlname"
+	            dlprefile_dlbasename=$func_basename_result
+	          else
+	            # no lafile. user explicitly requested -dlpreopen <import library>.
+	            $sharedlib_from_linklib_cmd "$dlprefile"
+	            dlprefile_dlbasename=$sharedlib_from_linklib_result
+	          fi
+	        fi
+	        $opt_dry_run || {
+	          if test -n "$dlprefile_dlbasename"; then
+	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+	          else
+	            func_warning "Could not compute DLL name from $name"
+	            eval '$ECHO ": $name " >> "$nlist"'
+	          fi
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+	        }
+	      else # not an import lib
+	        $opt_dry_run || {
+	          eval '$ECHO ": $name " >> "$nlist"'
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	        }
+	      fi
+	    ;;
+	    *)
+	      $opt_dry_run || {
+	        eval '$ECHO ": $name " >> "$nlist"'
+	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	      }
+	    ;;
+          esac
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  func_show_eval '$RM "${nlist}I"'
+	  if test -n "$global_symbol_to_import"; then
+	    eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+	  fi
+
+	  echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+  LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+  for (; symbol->name; ++symbol)
+    {"
+	    $SED 's/.*/      if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+	    echo >> "$output_objdir/$my_dlsyms" "\
+    }
+}"
+	  fi
+	  echo >> "$output_objdir/$my_dlsyms" "\
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{ {\"$my_originator\", (void *) 0},"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+  {\"@INIT@\", (void *) &lt_syminit},"
+	  fi
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  echo >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    $my_pic_p && pic_flag_for_symtable=" $pic_flag"
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) func_append symtab_cflags " $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj=$output_objdir/${my_outputname}S.$objext
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for '$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+  $debug_cmd
+
+  win32_libid_type=unknown
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+      case $nm_interface in
+      "MS dumpbin")
+	if func_cygming_ms_implib_p "$1" ||
+	   func_cygming_gnu_implib_p "$1"
+	then
+	  win32_nmres=import
+	else
+	  win32_nmres=
+	fi
+	;;
+      *)
+	func_to_tool_file "$1" func_convert_file_msys_to_w32
+	win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	  $SED -n -e '
+	    1,100{
+		/ I /{
+		    s|.*|import|
+		    p
+		    q
+		}
+	    }'`
+	;;
+      esac
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+  $debug_cmd
+
+  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+  $debug_cmd
+
+  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+    $SED '/^Contents of section '"$match_literal"':/{
+      # Place marker at beginning of archive member dllname section
+      s/.*/====MARK====/
+      p
+      d
+    }
+    # These lines can sometimes be longer than 43 characters, but
+    # are always uninteresting
+    /:[	 ]*file format pe[i]\{,1\}-/d
+    /^In archive [^:]*:/d
+    # Ensure marker is printed
+    /^====MARK====/p
+    # Remove all lines with less than 43 characters
+    /^.\{43\}/!d
+    # From remaining lines, remove first 43 characters
+    s/^.\{43\}//' |
+    $SED -n '
+      # Join marker and all lines until next marker into a single line
+      /^====MARK====/ b para
+      H
+      $ b para
+      b
+      :para
+      x
+      s/\n//g
+      # Remove the marker
+      s/^====MARK====//
+      # Remove trailing dots and whitespace
+      s/[\. \t]*$//
+      # Print
+      /./p' |
+    # we now have a list, one entry per line, of the stringified
+    # contents of the appropriate section of all members of the
+    # archive that possess that section. Heuristic: eliminate
+    # all those that have a first or second character that is
+    # a '.' (that is, objdump's representation of an unprintable
+    # character.) This should work for all archives with less than
+    # 0x302f exports -- but will fail for DLLs whose name actually
+    # begins with a literal '.' or a single character followed by
+    # a '.'.
+    #
+    # Of those that remain, print the first one.
+    $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+  $debug_cmd
+
+  if func_cygming_gnu_implib_p "$1"; then
+    # binutils import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+  elif func_cygming_ms_implib_p "$1"; then
+    # ms-generated import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+  else
+    # unknown
+    sharedlib_from_linklib_result=
+  fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $debug_cmd
+
+    f_ex_an_ar_dir=$1; shift
+    f_ex_an_ar_oldlib=$1
+    if test yes = "$lock_old_archive_extraction"; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test yes = "$lock_old_archive_extraction"; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $debug_cmd
+
+    my_gentop=$1; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=
+    my_xlib=
+    my_xabs=
+    my_xdir=
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib=$func_basename_result
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir=$my_gentop/$my_xlib_u
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  func_basename "$darwin_archive"
+	  darwin_base_archive=$func_basename_result
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches; do
+	      func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+	      cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      func_extract_an_archive "`pwd`" "$darwin_base_archive"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+    done
+
+    func_extract_archives_result=$my_oldobjs
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory where it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=${1-no}
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    file=\"\$0\""
+
+    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=\"$qECHO\"
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ that is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options that match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+  done
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test yes = "$fast_install"; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	\$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# fixup the dll searchpath if we need to.
+	#
+	# Fix the DLL searchpath if we need to.  Do this before prepending
+	# to shlibpath, because on Windows, both are PATH and uninstalled
+	# libraries must come first.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	# Export our shlibpath_var if we have one.
+	if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+      func_exec_program \${1+\"\$@\"}
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+*/
+EOF
+	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* declarations of non-ANSI functions */
+#if defined __MINGW32__
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined __CYGWIN__
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined other_platform || defined ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined _MSC_VER
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+#elif defined __MINGW32__
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined __CYGWIN__
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined other platforms ... */
+#endif
+
+#if defined PATH_MAX
+# define LT_PATHMAX PATH_MAX
+#elif defined MAXPATHLEN
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+  defined __OS2__
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free (stale); stale = 0; } \
+} while (0)
+
+#if defined LT_DEBUGWRAPPER
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+	    cat <<EOF
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_path "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_path "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test yes = "$fast_install"; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  int rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  newargz = XMALLOC (char *, (size_t) argc + 1);
+
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (STREQ (argv[i], dumpscript_opt))
+	{
+EOF
+	    case $host in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  lt_dump_script (stdout);
+	  return 0;
+	}
+      if (STREQ (argv[i], debug_opt))
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (STREQ (argv[i], ltwrapper_option_prefix))
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
+     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+     because on Windows, both *_VARNAMEs are PATH but uninstalled
+     libraries must come first. */
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
+  for (i = 0; i < newargc; i++)
+    {
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  newargz = prepare_spawn (newargz);
+  rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  size_t tmp_len;
+  char *concat_name;
+
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = (size_t) (q - p);
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (STREQ (str, pat))
+	*str = '\0';
+    }
+  return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    size_t len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      size_t orig_value_len = strlen (orig_value);
+      size_t add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      size_t len = strlen (new_value);
+      while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[--len] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+EOF
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+   Note that spawn() does not by itself call the command interpreter
+     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+         GetVersionEx(&v);
+         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+      }) ? "cmd.exe" : "command.com").
+   Instead it simply concatenates the arguments, separated by ' ', and calls
+   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
+   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+   special way:
+   - Space and tab are interpreted as delimiters. They are not treated as
+     delimiters if they are surrounded by double quotes: "...".
+   - Unescaped double quotes are removed from the input. Their only effect is
+     that within double quotes, space and tab are treated like normal
+     characters.
+   - Backslashes not followed by double quotes are not special.
+   - But 2*n+1 backslashes followed by a double quote become
+     n backslashes followed by a double quote (n >= 0):
+       \" -> "
+       \\\" -> \"
+       \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+  size_t argc;
+  char **new_argv;
+  size_t i;
+
+  /* Count number of arguments.  */
+  for (argc = 0; argv[argc] != NULL; argc++)
+    ;
+
+  /* Allocate new argument vector.  */
+  new_argv = XMALLOC (char *, argc + 1);
+
+  /* Put quoted arguments into the new argument vector.  */
+  for (i = 0; i < argc; i++)
+    {
+      const char *string = argv[i];
+
+      if (string[0] == '\0')
+	new_argv[i] = xstrdup ("\"\"");
+      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+	{
+	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+	  size_t length;
+	  unsigned int backslashes;
+	  const char *s;
+	  char *quoted_string;
+	  char *p;
+
+	  length = 0;
+	  backslashes = 0;
+	  if (quote_around)
+	    length++;
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		length += backslashes + 1;
+	      length++;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    length += backslashes + 1;
+
+	  quoted_string = XMALLOC (char, length + 1);
+
+	  p = quoted_string;
+	  backslashes = 0;
+	  if (quote_around)
+	    *p++ = '"';
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		{
+		  unsigned int j;
+		  for (j = backslashes + 1; j > 0; j--)
+		    *p++ = '\\';
+		}
+	      *p++ = c;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    {
+	      unsigned int j;
+	      for (j = backslashes; j > 0; j--)
+		*p++ = '\\';
+	      *p++ = '"';
+	    }
+	  *p = '\0';
+
+	  new_argv[i] = quoted_string;
+	}
+      else
+	new_argv[i] = (char *) string;
+    }
+  new_argv[argc] = NULL;
+
+  return new_argv;
+}
+EOF
+		;;
+	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
+            cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $debug_cmd
+
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+    $debug_cmd
+
+    case " $compile_command " in
+    *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+      suncc_use_cstd_abi=no
+      ;;
+    *)
+      suncc_use_cstd_abi=yes
+      ;;
+    esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $debug_cmd
+
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # what system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll that has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args=$nonopt
+    base_compile="$nonopt $@"
+    compile_command=$nonopt
+    finalize_command=$nonopt
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+    new_inherited_linker_flags=
+
+    avoid_version=no
+    bindir=
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    os2dllname=
+    non_pic_objects=
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=false
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+    weak_libs=
+    single_module=$wl-single_module
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -shared)
+	test yes != "$build_libtool_libs" \
+	  && func_fatal_configuration "cannot build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
+	  if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
+	    func_warning "complete static linking is impossible in this configuration"
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	-static)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg=$1
+      shift
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	bindir)
+	  bindir=$arg
+	  prev=
+	  continue
+	  ;;
+	dlfiles|dlprefiles)
+	  $preload || {
+	    # Add the symbol object into the linking commands.
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
+	    preload=:
+	  }
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test no = "$dlself"; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test dlprefiles = "$prev"; then
+	      dlself=yes
+	    elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test dlfiles = "$prev"; then
+	      func_append dlfiles " $arg"
+	    else
+	      func_append dlprefiles " $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols=$arg
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file '$arg' does not exist"
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex=$arg
+	  prev=
+	  continue
+	  ;;
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) func_append deplibs " $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir=$arg
+	  prev=
+	  continue
+	  ;;
+	mllvm)
+	  # Clang does not use LLVM to link, so we can simply discard any
+	  # '-mllvm $arg' options when doing the link step.
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat "$save_arg"`
+	    do
+#	      func_append moreargs " $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if func_lalib_unsafe_p "$arg"; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		func_source "$arg"
+
+		if test -z "$pic_object" ||
+		   test -z "$non_pic_object" ||
+		   test none = "$pic_object" &&
+		   test none = "$non_pic_object"; then
+		  func_fatal_error "cannot find name of object for '$arg'"
+		fi
+
+		# Extract subdirectory from the argument.
+		func_dirname "$arg" "/" ""
+		xdir=$func_dirname_result
+
+		if test none != "$pic_object"; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object=$xdir$pic_object
+
+		  if test dlfiles = "$prev"; then
+		    if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+		      func_append dlfiles " $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test dlprefiles = "$prev"; then
+		    # Preload the old-style object.
+		    func_append dlprefiles " $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  func_append libobjs " $pic_object"
+		  arg=$pic_object
+		fi
+
+		# Non-PIC object.
+		if test none != "$non_pic_object"; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object=$xdir$non_pic_object
+
+		  # A standard non-PIC object
+		  func_append non_pic_objects " $non_pic_object"
+		  if test -z "$pic_object" || test none = "$pic_object"; then
+		    arg=$non_pic_object
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object=$pic_object
+		  func_append non_pic_objects " $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if $opt_dry_run; then
+		  # Extract subdirectory from the argument.
+		  func_dirname "$arg" "/" ""
+		  xdir=$func_dirname_result
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "'$arg' is not a valid libtool object"
+		fi
+	      fi
+	    done
+	  else
+	    func_fatal_error "link input file '$arg' does not exist"
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	os2dllname)
+	  os2dllname=$arg
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex=$arg
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release=-$arg
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    func_fatal_error "only absolute run-paths are allowed"
+	    ;;
+	  esac
+	  if test rpath = "$prev"; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) func_append rpath " $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) func_append xrpath " $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	shrext)
+	  shrext_cmds=$arg
+	  prev=
+	  continue
+	  ;;
+	weak)
+	  func_append weak_libs " $arg"
+	  prev=
+	  continue
+	  ;;
+	xcclinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xcompiler)
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $wl$qarg"
+	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg=$arg
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	func_fatal_error "'-allow-undefined' must not be used because it is the default"
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
+	fi
+	if test X-export-symbols = "X$arg"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework)
+	prev=framework
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	func_stripname "-L" '' "$arg"
+	if test -z "$func_stripname_result"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between '-L' and '$1'"
+	  else
+	    func_fatal_error "need path for '-L' option"
+	  fi
+	fi
+	func_resolve_sysroot "$func_stripname_result"
+	dir=$func_resolve_sysroot_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of '$dir'"
+	  dir=$absdir
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "* | *" $arg "*)
+	  # Will only happen for absolute or sysroot arguments
+	  ;;
+	*)
+	  # Preserve sysroot, but never include relative directories
+	  case $dir in
+	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+	    *) func_append deplibs " -L$dir" ;;
+	  esac
+	  func_append lib_search_path " $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
+	  *) func_append dllsearchpath ":$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test X-lc = "X$arg" || test X-lm = "X$arg"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    func_append deplibs " System.ltframework"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  esac
+	elif test X-lc_r = "X$arg"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	func_append deplibs " $arg"
+	continue
+	;;
+
+      -mllvm)
+	prev=mllvm
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot|--sysroot)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	prev=xcompiler
+	continue
+	;;
+
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) func_append new_inherited_linker_flags " $arg" ;;
+	esac
+	continue
+	;;
+
+      -multi_module)
+	single_module=$wl-multi_module
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "'-no-install' is ignored for $host"
+	  func_warning "assuming '-no-fast-install' instead"
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -os2dllname)
+	prev=os2dllname
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	=*)
+	  func_stripname '=' '' "$dir"
+	  dir=$lt_sysroot$func_stripname_result
+	  ;;
+	*)
+	  func_fatal_error "only absolute run-paths are allowed"
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) func_append xrpath " $dir" ;;
+	esac
+	continue
+	;;
+
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -weak)
+        prev=weak
+	continue
+	;;
+
+      -Wc,*)
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs=$IFS; IFS=,
+	for flag in $args; do
+	  IFS=$save_ifs
+          func_quote_for_eval "$flag"
+	  func_append arg " $func_quote_for_eval_result"
+	  func_append compiler_flags " $func_quote_for_eval_result"
+	done
+	IFS=$save_ifs
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Wl,*)
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs=$IFS; IFS=,
+	for flag in $args; do
+	  IFS=$save_ifs
+          func_quote_for_eval "$flag"
+	  func_append arg " $wl$func_quote_for_eval_result"
+	  func_append compiler_flags " $wl$func_quote_for_eval_result"
+	  func_append linker_flags " $func_quote_for_eval_result"
+	done
+	IFS=$save_ifs
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+	;;
+
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # -fstack-protector*   stack protector flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
+      # --sysroot=*          for sysroot support
+      # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      # -stdlib=*            select c++ std lib with clang
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+      -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*)
+        func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        func_append compiler_flags " $arg"
+        continue
+        ;;
+
+      -Z*)
+        if test os2 = "`expr $host : '.*\(os2\)'`"; then
+          # OS/2 uses -Zxxx to specify OS/2-specific options
+	  compiler_flags="$compiler_flags $arg"
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  case $arg in
+	  -Zlinker | -Zstack)
+	    prev=xcompiler
+	    ;;
+	  esac
+	  continue
+        else
+	  # Otherwise treat like 'Some other compiler flag' below
+	  func_quote_for_eval "$arg"
+	  arg=$func_quote_for_eval_result
+        fi
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+        func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+	;;
+
+      *.$objext)
+	# A standard object.
+	func_append objs " $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if func_lalib_unsafe_p "$arg"; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  func_source "$arg"
+
+	  if test -z "$pic_object" ||
+	     test -z "$non_pic_object" ||
+	     test none = "$pic_object" &&
+	     test none = "$non_pic_object"; then
+	    func_fatal_error "cannot find name of object for '$arg'"
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  func_dirname "$arg" "/" ""
+	  xdir=$func_dirname_result
+
+	  test none = "$pic_object" || {
+	    # Prepend the subdirectory the object is found in.
+	    pic_object=$xdir$pic_object
+
+	    if test dlfiles = "$prev"; then
+	      if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+		func_append dlfiles " $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test dlprefiles = "$prev"; then
+	      # Preload the old-style object.
+	      func_append dlprefiles " $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    func_append libobjs " $pic_object"
+	    arg=$pic_object
+	  }
+
+	  # Non-PIC object.
+	  if test none != "$non_pic_object"; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object=$xdir$non_pic_object
+
+	    # A standard non-PIC object
+	    func_append non_pic_objects " $non_pic_object"
+	    if test -z "$pic_object" || test none = "$pic_object"; then
+	      arg=$non_pic_object
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object=$pic_object
+	    func_append non_pic_objects " $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if $opt_dry_run; then
+	    # Extract subdirectory from the argument.
+	    func_dirname "$arg" "/" ""
+	    xdir=$func_dirname_result
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "'$arg' is not a valid libtool object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	func_append deplibs " $arg"
+	func_append old_deplibs " $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	func_resolve_sysroot "$arg"
+	if test dlfiles = "$prev"; then
+	  # This library was specified with -dlopen.
+	  func_append dlfiles " $func_resolve_sysroot_result"
+	  prev=
+	elif test dlprefiles = "$prev"; then
+	  # The library was specified with -dlpreopen.
+	  func_append dlprefiles " $func_resolve_sysroot_result"
+	  prev=
+	else
+	  func_append deplibs " $func_resolve_sysroot_result"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+      fi
+    done # argument parsing loop
+
+    test -n "$prev" && \
+      func_fatal_help "the '$prevarg' option requires an argument"
+
+    if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    func_basename "$output"
+    outputname=$func_basename_result
+    libobjs_save=$libobjs
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    # Definition is injected by LT_CONFIG during libtool generation.
+    func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
+    func_dirname "$output" "/" ""
+    output_objdir=$func_dirname_result$objdir
+    func_to_tool_file "$output_objdir/"
+    tool_output_objdir=$func_to_tool_file_result
+    # Create the object directory.
+    func_mkdir_p "$output_objdir"
+
+    # Determine the type of output
+    case $output in
+    "")
+      func_fatal_help "you must specify an output file"
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if $opt_preserve_dup_deps; then
+	case "$libs " in
+	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	esac
+      fi
+      func_append libs " $deplib"
+    done
+
+    if test lib = "$linkmode"; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if $opt_duplicate_compiler_generated_deps; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+	  esac
+	  func_append pre_post_deps " $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
+    case $linkmode in
+    lib)
+	passes="conv dlpreopen link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=false
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+
+    for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test lib,link = "$linkmode,$pass"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs=$tmp_deplibs
+      fi
+
+      if test lib,link = "$linkmode,$pass" ||
+	 test prog,scan = "$linkmode,$pass"; then
+	libs=$deplibs
+	deplibs=
+      fi
+      if test prog = "$linkmode"; then
+	case $pass in
+	dlopen) libs=$dlfiles ;;
+	dlpreopen) libs=$dlprefiles ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      if test lib,dlpreopen = "$linkmode,$pass"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  func_resolve_sysroot "$lib"
+	  case $lib in
+	  *.la)	func_source "$func_resolve_sysroot_result" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) func_append deplibs " $deplib" ;;
+	    esac
+	  done
+	done
+	libs=$dlprefiles
+      fi
+      if test dlopen = "$pass"; then
+	# Collect dlpreopened libraries
+	save_deplibs=$deplibs
+	deplibs=
+      fi
+
+      for deplib in $libs; do
+	lib=
+	found=false
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	  if test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    func_append compiler_flags " $deplib"
+	    if test lib = "$linkmode"; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test lib != "$linkmode" && test prog != "$linkmode"; then
+	    func_warning "'-l' is ignored for archives/objects"
+	    continue
+	  fi
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test lib = "$linkmode"; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib=$searchdir/lib$name$search_ext
+	      if test -f "$lib"; then
+		if test .la = "$search_ext"; then
+		  found=:
+		else
+		  found=false
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if $found; then
+	    # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if func_lalib_p "$lib"; then
+		  library_names=
+		  old_library=
+		  func_source "$lib"
+		  for l in $old_library $library_names; do
+		    ll=$l
+		  done
+		  if test "X$ll" = "X$old_library"; then # only static version available
+		    found=false
+		    func_dirname "$lib" "" "."
+		    ladir=$func_dirname_result
+		    lib=$ladir/$old_library
+		    if test prog,link = "$linkmode,$pass"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+		;;
+	      *) ;;
+	      esac
+	    fi
+	  else
+	    # deplib doesn't seem to be a libtool library
+	    if test prog,link = "$linkmode,$pass"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  fi
+	  ;; # -l
+	*.ltframework)
+	  if test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test lib = "$linkmode"; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test conv = "$pass" && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  prog)
+	    if test conv = "$pass"; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test scan = "$pass"; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  *)
+	    func_warning "'-L' is ignored for archives/objects"
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test link = "$pass"; then
+	    func_stripname '-R' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    dir=$func_resolve_sysroot_result
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) func_append xrpath " $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la)
+	  func_resolve_sysroot "$deplib"
+	  lib=$func_resolve_sysroot_result
+	  ;;
+	*.$libext)
+	  if test conv = "$pass"; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=false
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		    valid_a_lib=:
+		  fi
+		;;
+		pass_all)
+		  valid_a_lib=:
+		;;
+	      esac
+	      if $valid_a_lib; then
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      else
+		echo
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
+	      fi
+	      ;;
+	    esac
+	    continue
+	    ;;
+	  prog)
+	    if test link != "$pass"; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test conv = "$pass"; then
+	    deplibs="$deplib $deplibs"
+	  elif test prog = "$linkmode"; then
+	    if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      func_append newdlprefiles " $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      func_append newdlfiles " $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=:
+	  continue
+	  ;;
+	esac # case $deplib
+
+	$found || test -f "$lib" \
+	  || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "'$lib' is not a valid libtool archive"
+
+	func_dirname "$lib" "" "."
+	ladir=$func_dirname_result
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	inherited_linker_flags=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	if test lib,link = "$linkmode,$pass" ||
+	   test prog,scan = "$linkmode,$pass" ||
+	   { test prog != "$linkmode" && test lib != "$linkmode"; }; then
+	  test -n "$dlopen" && func_append dlfiles " $dlopen"
+	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+	fi
+
+	if test conv = "$pass"; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      func_fatal_error "cannot find name of link library for '$lib'"
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    func_append convenience " $ladir/$objdir/$old_library"
+	    func_append old_convenience " $ladir/$objdir/$old_library"
+	  elif test prog != "$linkmode" && test lib != "$linkmode"; then
+	    func_fatal_error "'$lib' is not a convenience library"
+	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	if test -n "$old_library" &&
+	   { test yes = "$prefer_static_libs" ||
+	     test built,no = "$prefer_static_libs,$installed"; }; then
+	  linklib=$old_library
+	else
+	  for l in $old_library $library_names; do
+	    linklib=$l
+	  done
+	fi
+	if test -z "$linklib"; then
+	  func_fatal_error "cannot find name of link library for '$lib'"
+	fi
+
+	# This library was specified with -dlopen.
+	if test dlopen = "$pass"; then
+	  test -z "$libdir" \
+	    && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
+	  if test -z "$dlname" ||
+	     test yes != "$dlopen_support" ||
+	     test no = "$build_libtool_libs"
+	  then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    func_append dlprefiles " $lib $dependency_libs"
+	  else
+	    func_append newdlfiles " $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    func_warning "cannot determine absolute directory name of '$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
+	    abs_ladir=$ladir
+	  fi
+	  ;;
+	esac
+	func_basename "$lib"
+	laname=$func_basename_result
+
+	# Find the relevant object directory and library name.
+	if test yes = "$installed"; then
+	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    func_warning "library '$lib' was moved."
+	    dir=$ladir
+	    absdir=$abs_ladir
+	    libdir=$abs_ladir
+	  else
+	    dir=$lt_sysroot$libdir
+	    absdir=$lt_sysroot$libdir
+	  fi
+	  test yes = "$hardcode_automatic" && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir=$ladir
+	    absdir=$abs_ladir
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  else
+	    dir=$ladir/$objdir
+	    absdir=$abs_ladir/$objdir
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  fi
+	fi # $installed = yes
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
+
+	# This library was specified with -dlpreopen.
+	if test dlpreopen = "$pass"; then
+	  if test -z "$libdir" && test prog = "$linkmode"; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
+	  fi
+	  case $host in
+	    # special handling for platforms with PE-DLLs.
+	    *cygwin* | *mingw* | *cegcc* )
+	      # Linker will automatically link against shared library if both
+	      # static and shared are present.  Therefore, ensure we extract
+	      # symbols from the import library if a shared library is present
+	      # (otherwise, the dlopen module name will be incorrect).  We do
+	      # this by putting the import library name into $newdlprefiles.
+	      # We recover the dlopen module name by 'saving' the la file
+	      # name in a special purpose variable, and (later) extracting the
+	      # dlname from the la file.
+	      if test -n "$dlname"; then
+	        func_tr_sh "$dir/$linklib"
+	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+	        func_append newdlprefiles " $dir/$linklib"
+	      else
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      fi
+	    ;;
+	    * )
+	      # Prefer using a static library (so that no silly _DYNAMIC symbols
+	      # are required to link).
+	      if test -n "$old_library"; then
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      # Otherwise, use the dlname, so that lt_dlopen finds it.
+	      elif test -n "$dlname"; then
+	        func_append newdlprefiles " $dir/$dlname"
+	      else
+	        func_append newdlprefiles " $dir/$linklib"
+	      fi
+	    ;;
+	  esac
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test lib = "$linkmode"; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test prog = "$linkmode" && test link != "$pass"; then
+	  func_append newlib_search_path " $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=false
+	  if test no != "$link_all_deplibs" || test -z "$library_names" ||
+	     test no = "$build_libtool_libs"; then
+	    linkalldeplibs=:
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) func_stripname '-L' '' "$deplib"
+	         func_resolve_sysroot "$func_stripname_result"
+	         func_append newlib_search_path " $func_resolve_sysroot_result"
+		 ;;
+	    esac
+	    # Need to link against all dependency_libs?
+	    if $linkalldeplibs; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test prog,link = "$linkmode,$pass"; then
+	  if test -n "$library_names" &&
+	     { { test no = "$prefer_static_libs" ||
+	         test built,yes = "$prefer_static_libs,$installed"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
+	      # Make sure the rpath contains only unique directories.
+	      case $temp_rpath: in
+	      *"$absdir:"*) ;;
+	      *) func_append temp_rpath "$absdir:" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if $alldeplibs &&
+	     { test pass_all = "$deplibs_check_method" ||
+	       { test yes = "$build_libtool_libs" &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test built = "$use_static_libs" && test yes = "$installed"; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test no = "$use_static_libs" || test -z "$old_library"; }; then
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc* | *os2*)
+	      # No point in relinking DLLs because paths are not encoded
+	      func_append notinst_deplibs " $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test no = "$installed"; then
+	      func_append notinst_deplibs " $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule=$dlpremoduletest
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
+	    echo
+	    if test prog = "$linkmode"; then
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $ECHO "*** $linklib is not portable!"
+	  fi
+	  if test lib = "$linkmode" &&
+	     test yes = "$hardcode_into_libs"; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    shift
+	    realname=$1
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname=$dlname
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw* | *cegcc* | *os2*)
+	        func_arith $current - $age
+		major=$func_arith_result
+		versuffix=-$major
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname=$realname
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot=$soname
+	    func_basename "$soroot"
+	    soname=$func_basename_result
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      func_verbose "extracting exported symbol list from '$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      func_verbose "generating import library for '$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test prog = "$linkmode" || test relink != "$opt_mode"; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test no = "$hardcode_direct"; then
+		add=$dir/$linklib
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+		  *-*-sysv4*uw2*) add_dir=-L$dir ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir=-L$dir ;;
+		  *-*-darwin* )
+		    # if the lib is a (non-dlopened) module then we cannot
+		    # link against it, someone is ignoring the earlier warnings
+		    if /usr/bin/file -L $add 2> /dev/null |
+			 $GREP ": [^:]* bundle" >/dev/null; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library"; then
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
+			else
+			  add=$dir/$old_library
+			fi
+		      elif test -n "$old_library"; then
+			add=$dir/$old_library
+		      fi
+		    fi
+		esac
+	      elif test no = "$hardcode_minus_L"; then
+		case $host in
+		*-*-sunos*) add_shlibpath=$dir ;;
+		esac
+		add_dir=-L$dir
+		add=-l$name
+	      elif test no = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test yes = "$hardcode_direct" &&
+	         test no = "$hardcode_direct_absolute"; then
+		add=$dir/$linklib
+	      elif test yes = "$hardcode_minus_L"; then
+		add_dir=-L$absdir
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      func_append add_dir " -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add=-l$name
+	      elif test yes = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test yes != "$lib_linked"; then
+	      func_fatal_configuration "unsupported hardcode properties"
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test prog = "$linkmode"; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test yes != "$hardcode_direct" &&
+		 test yes != "$hardcode_minus_L" &&
+		 test yes = "$hardcode_shlibpath_var"; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) func_append finalize_shlibpath "$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test prog = "$linkmode" || test relink = "$opt_mode"; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test yes = "$hardcode_direct" &&
+	       test no = "$hardcode_direct_absolute"; then
+	      add=$libdir/$linklib
+	    elif test yes = "$hardcode_minus_L"; then
+	      add_dir=-L$libdir
+	      add=-l$name
+	    elif test yes = "$hardcode_shlibpath_var"; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) func_append finalize_shlibpath "$libdir:" ;;
+	      esac
+	      add=-l$name
+	    elif test yes = "$hardcode_automatic"; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib"; then
+		add=$inst_prefix_dir$libdir/$linklib
+	      else
+		add=$libdir/$linklib
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir=-L$libdir
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    func_append add_dir " -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add=-l$name
+	    fi
+
+	    if test prog = "$linkmode"; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test prog = "$linkmode"; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test unsupported != "$hardcode_direct"; then
+	    test -n "$old_library" && linklib=$old_library
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test yes = "$build_libtool_libs"; then
+	  # Not a shared library
+	  if test pass_all != "$deplibs_check_method"; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    $ECHO "*** Warning: This system cannot link to static lib archive $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	    if test yes = "$module"; then
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** 'nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test no = "$build_old_libs"; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test lib = "$linkmode"; then
+	  if test -n "$dependency_libs" &&
+	     { test yes != "$hardcode_into_libs" ||
+	       test yes = "$build_old_libs" ||
+	       test yes = "$link_static"; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) func_append xrpath " $temp_xrpath";;
+		   esac;;
+	      *) func_append temp_deplibs " $libdir";;
+	      esac
+	    done
+	    dependency_libs=$temp_deplibs
+	  fi
+
+	  func_append newlib_search_path " $absdir"
+	  # Link against this library
+	  test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    case $deplib in
+              -L*) func_stripname '-L' '' "$deplib"
+                   func_resolve_sysroot "$func_stripname_result";;
+              *) func_resolve_sysroot "$deplib" ;;
+            esac
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $func_resolve_sysroot_result "*)
+                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $func_resolve_sysroot_result"
+	  done
+
+	  if test no != "$link_all_deplibs"; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      path=
+	      case $deplib in
+	      -L*) path=$deplib ;;
+	      *.la)
+	        func_resolve_sysroot "$deplib"
+	        deplib=$func_resolve_sysroot_result
+	        func_dirname "$deplib" "" "."
+		dir=$func_dirname_result
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    func_warning "cannot determine absolute directory name of '$dir'"
+		    absdir=$dir
+		  fi
+		  ;;
+		esac
+		if $GREP "^installed=no" $deplib > /dev/null; then
+		case $host in
+		*-*-darwin*)
+		  depdepl=
+		  eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names"; then
+		    for tmp in $deplibrary_names; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$absdir/$objdir/$depdepl"; then
+		      depdepl=$absdir/$objdir/$depdepl
+		      darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`$OTOOL64 -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+		      func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
+		      path=
+		    fi
+		  fi
+		  ;;
+		*)
+		  path=-L$absdir/$objdir
+		  ;;
+		esac
+		else
+		  eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "'$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "'$deplib' seems to be moved"
+
+		  path=-L$absdir
+		fi
+		;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test link = "$pass"; then
+	if test prog = "$linkmode"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
+      dependency_libs=$newdependency_libs
+      if test dlpreopen = "$pass"; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test dlopen != "$pass"; then
+	test conv = "$pass" || {
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) func_append lib_search_path " $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	}
+
+	if test prog,link = "$linkmode,$pass"; then
+	  vars="compile_deplibs finalize_deplibs"
+	else
+	  vars=deplibs
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) func_append tmp_libs " $deplib" ;;
+	      esac
+	      ;;
+	    *) func_append tmp_libs " $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+
+      # Add Sun CC postdeps if required:
+      test CXX = "$tagname" && {
+        case $host_os in
+        linux*)
+          case `$CC -V 2>&1 | sed 5q` in
+          *Sun\ C*) # Sun C++ 5.9
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+
+        solaris*)
+          func_cc_basename "$CC"
+          case $func_cc_basename_result in
+          CC* | sunCC*)
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+        esac
+      }
+
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=
+	  ;;
+	esac
+	if test -n "$i"; then
+	  func_append tmp_libs " $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test prog = "$linkmode"; then
+      dlfiles=$newdlfiles
+    fi
+    if test prog = "$linkmode" || test lib = "$linkmode"; then
+      dlprefiles=$newdlprefiles
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for archives"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "'-l' and '-L' are ignored for archives" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "'-rpath' is ignored for archives"
+
+      test -n "$xrpath" && \
+	func_warning "'-R' is ignored for archives"
+
+      test -n "$vinfo" && \
+	func_warning "'-version-info/-version-number' is ignored for archives"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "'-export-symbols' is ignored for archives"
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs=$output
+      func_append objs "$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form 'libNAME.la'.
+      case $outputname in
+      lib*)
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	test no = "$module" \
+	  && func_fatal_help "libtool library '$output' must begin with 'lib'"
+
+	if test no != "$need_lib_prefix"; then
+	  # Add the "lib" prefix for modules if required
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test pass_all != "$deplibs_check_method"; then
+	  func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
+	else
+	  echo
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
+	  func_append libobjs " $objs"
+	fi
+      fi
+
+      test no = "$dlself" \
+	|| func_warning "'-dlopen self' is ignored for libtool libraries"
+
+      set dummy $rpath
+      shift
+      test 1 -lt "$#" \
+	&& func_warning "ignoring multiple '-rpath's for a libtool library"
+
+      install_libdir=$1
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test yes = "$build_libtool_libs"; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a '.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	test -n "$vinfo" && \
+	  func_warning "'-version-info/-version-number' is ignored for convenience libraries"
+
+	test -n "$release" && \
+	  func_warning "'-release' is ignored for convenience libraries"
+      else
+
+	# Parse the version information argument.
+	save_ifs=$IFS; IFS=:
+	set dummy $vinfo 0 0 0
+	shift
+	IFS=$save_ifs
+
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to '-version-info'"
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major=$1
+	  number_minor=$2
+	  number_revision=$3
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # that has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
+	  darwin|freebsd-elf|linux|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age=$number_minor
+	    revision=$number_revision
+	    ;;
+	  freebsd-aout|qnx|sunos)
+	    current=$number_major
+	    revision=$number_minor
+	    age=0
+	    ;;
+	  irix|nonstopux)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age=$number_minor
+	    revision=$number_minor
+	    lt_irix_increment=no
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current=$1
+	  revision=$2
+	  age=$3
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "CURRENT '$current' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "REVISION '$revision' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "AGE '$age' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  func_error "AGE '$age' is greater than the current interface number '$current'"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  # Darwin ld doesn't like 0 for these options...
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+          # On Darwin other compilers
+          case $CC in
+              nagfor*)
+                  verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+                  ;;
+              *)
+                  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+                  ;;
+          esac
+	  ;;
+
+	freebsd-aout)
+	  major=.$current
+	  versuffix=.$current.$revision
+	  ;;
+
+	freebsd-elf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  ;;
+
+	irix | nonstopux)
+	  if test no = "$lt_irix_increment"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring=$verstring_prefix$major.$revision
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test 0 -ne "$loop"; do
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring=$verstring_prefix$major.$iface:$verstring
+	  done
+
+	  # Before this point, $major must not contain '.'.
+	  major=.$major
+	  versuffix=$major.$revision
+	  ;;
+
+	linux) # correct to gnu/linux during the next big refactor
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  ;;
+
+	osf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=.$current.$age.$revision
+	  verstring=$current.$age.$revision
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test 0 -ne "$loop"; do
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring=$verstring:$iface.0
+	  done
+
+	  # Make executables depend on our current version.
+	  func_append verstring ":$current.0"
+	  ;;
+
+	qnx)
+	  major=.$current
+	  versuffix=.$current
+	  ;;
+
+	sco)
+	  major=.$current
+	  versuffix=.$current
+	  ;;
+
+	sunos)
+	  major=.$current
+	  versuffix=.$current.$revision
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 file systems.
+	  func_arith $current - $age
+	  major=$func_arith_result
+	  versuffix=-$major
+	  ;;
+
+	*)
+	  func_fatal_configuration "unknown library version type '$version_type'"
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring=0.0
+	    ;;
+	  esac
+	  if test no = "$need_version"; then
+	    versuffix=
+	  else
+	    versuffix=.0.0
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test yes,no = "$avoid_version,$need_version"; then
+	  major=
+	  versuffix=
+	  verstring=
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test yes = "$allow_undefined"; then
+	  if test unsupported = "$allow_undefined_flag"; then
+	    if test yes = "$build_old_libs"; then
+	      func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+	      build_libtool_libs=no
+	    else
+	      func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+	    fi
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag=$no_undefined_flag
+	fi
+
+      fi
+
+      func_generate_dlsyms "$libname" "$libname" :
+      func_append libobjs " $symfileobj"
+      test " " = "$libobjs" && libobjs=
+
+      if test relink != "$opt_mode"; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$ECHO "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext | *.gcno)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+	       if test -n "$precious_files_regex"; then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
+		   continue
+		 fi
+	       fi
+	       func_append removelist " $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
+      fi
+
+      # Now set the variables for building old libraries.
+      if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
+	func_append oldlibs " $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  func_replace_sysroot "$libdir"
+	  func_append temp_xrpath " -R$func_replace_sysroot_result"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+	if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles=$dlfiles
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) func_append dlfiles " $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles=$dlprefiles
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) func_append dlprefiles " $lib" ;;
+	esac
+      done
+
+      if test yes = "$build_libtool_libs"; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    func_append deplibs " System.ltframework"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test yes = "$build_libtool_need_lc"; then
+	      func_append deplibs " -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=
+	versuffix=
+	major=
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $opt_dry_run || $RM conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    func_append newdeplibs " $i"
+		    i=
+		    ;;
+		  esac
+		fi
+		if test -n "$i"; then
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+		    func_append newdeplibs " $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		  ldd_output=`ldd conftest`
+		  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      func_append newdeplibs " $i"
+		      i=
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i"; then
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+		      func_append newdeplibs " $i"
+		    else
+		      droppeddeps=yes
+		      echo
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib"; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		if test -n "$file_magic_glob"; then
+		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+		else
+		  libnameglob=$libname
+		fi
+		test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  if test yes = "$want_nocaseglob"; then
+		    shopt -s nocaseglob
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		    $nocaseglob
+		  else
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		  fi
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib=$potent_lib
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+			*) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
+			func_append newdeplibs " $a_deplib"
+			a_deplib=
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib"; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib"; then
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib"; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib=$potent_lib # see symlink-check above in file_magic test
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
+		      func_append newdeplibs " $a_deplib"
+		      a_deplib=
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib"; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib"; then
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+	  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	    for i in $predeps $postdeps; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
+	    done
+	  fi
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
+	    if test none = "$deplibs_check_method"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	    ;;
+	  esac
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+	  ;;
+	esac
+
+	if test yes = "$droppeddeps"; then
+	  if test yes = "$module"; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** 'nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test no = "$build_old_libs"; then
+	      oldlibs=$output_objdir/$libname.$libext
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test no = "$allow_undefined"; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test no = "$build_old_libs"; then
+		oldlibs=$output_objdir/$libname.$libext
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      deplibs=$new_libs
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test yes = "$build_libtool_libs"; then
+	# Remove $wl instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
+	if test yes = "$hardcode_into_libs"; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath=$finalize_rpath
+	  test relink = "$opt_mode" || rpath=$compile_rpath$rpath
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		func_replace_sysroot "$libdir"
+		libdir=$func_replace_sysroot_result
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs=$libdir
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		func_append dep_rpath " $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append perm_rpath " $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir=$hardcode_libdirs
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      func_append rpath "$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath=$finalize_shlibpath
+	test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	shift
+	realname=$1
+	shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname=$realname
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib=$output_objdir/$realname
+	linknames=
+	for link
+	do
+	  func_append linknames " $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols=$output_objdir/$libname.uexp
+	  func_append delfiles " $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    func_dll_def_p "$export_symbols" || {
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols=$export_symbols
+	      export_symbols=
+	      always_export_symbols=yes
+	    }
+	  fi
+	  ;;
+	esac
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for '$libname.la'"
+	    export_symbols=$output_objdir/$libname.exp
+	    $opt_dry_run || $RM $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs=$IFS; IFS='~'
+	    for cmd1 in $cmds; do
+	      IFS=$save_ifs
+	      # Take the normal branch if the nm_file_list_spec branch
+	      # doesn't work or if tool conversion is not needed.
+	      case $nm_file_list_spec~$to_tool_file_cmd in
+		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+		  try_normal_branch=yes
+		  eval cmd=\"$cmd1\"
+		  func_len " $cmd"
+		  len=$func_len_result
+		  ;;
+		*)
+		  try_normal_branch=no
+		  ;;
+	      esac
+	      if test yes = "$try_normal_branch" \
+		 && { test "$len" -lt "$max_cmd_len" \
+		      || test "$max_cmd_len" -le -1; }
+	      then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
+	      elif test -n "$nm_file_list_spec"; then
+		func_basename "$output"
+		output_la=$func_basename_result
+		save_libobjs=$libobjs
+		save_output=$output
+		output=$output_objdir/$output_la.nm
+		func_to_tool_file "$output"
+		libobjs=$nm_file_list_spec$func_to_tool_file_result
+		func_append delfiles " $output"
+		func_verbose "creating $NM input file list: $output"
+		for obj in $save_libobjs; do
+		  func_to_tool_file "$obj"
+		  $ECHO "$func_to_tool_file_result"
+		done > "$output"
+		eval cmd=\"$cmd1\"
+		func_show_eval "$cmd" 'exit $?'
+		output=$save_output
+		libobjs=$save_libobjs
+		skipped_export=false
+	      else
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS=$save_ifs
+	    if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  tmp_export_symbols=$export_symbols
+	  test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands, which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    func_append tmp_deplibs " $test_deplib"
+	    ;;
+	  esac
+	done
+	deplibs=$tmp_deplibs
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test yes = "$compiler_needs_object" &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  else
+	    gentop=$output_objdir/${outputname}x
+	    func_append generated " $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    func_append libobjs " $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	fi
+
+	if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  func_append linker_flags " $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test relink = "$opt_mode"; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test yes = "$module" && test -n "$module_cmds"; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
+	  fi
+	fi
+
+	if test : != "$skipped_export" &&
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  func_basename "$output"
+	  output_la=$func_basename_result
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  last_robj=
+	  k=1
+
+	  if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+	    output=$output_objdir/$output_la.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    echo 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    echo ')' >> $output
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$func_to_tool_file_result
+	  elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+	    output=$output_objdir/$output_la.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test yes = "$compiler_needs_object"; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-$k.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test -z "$objlist" ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test 1 -eq "$k"; then
+		    # The first file doesn't have a previous command to add.
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-$k.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-$k.$objext
+		  objlist=" $obj"
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\$concat_cmds$reload_cmds\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	      func_append delfiles " $output"
+
+	    else
+	      output=
+	    fi
+
+	    ${skipped_export-false} && {
+	      func_verbose "generating symbol list for '$libname.la'"
+	      export_symbols=$output_objdir/$libname.exp
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	    }
+
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs=$IFS; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS=$save_ifs
+	      $opt_quiet || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test relink = "$opt_mode"; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
+
+		exit $lt_exit
+	      }
+	    done
+	    IFS=$save_ifs
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          ${skipped_export-false} && {
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols=$export_symbols
+	      test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands, which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  }
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test yes = "$module" && test -n "$module_cmds"; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
+	    fi
+	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append libobjs " $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
+	fi
+
+	save_ifs=$IFS; IFS='~'
+	for cmd in $cmds; do
+	  IFS=$sp$nl
+	  eval cmd=\"$cmd\"
+	  IFS=$save_ifs
+	  $opt_quiet || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test relink = "$opt_mode"; then
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS=$save_ifs
+
+	# Restore the uninstalled library and exit
+	if test relink = "$opt_mode"; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      func_show_eval '${RM}r "$gentop"'
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test yes = "$module" || test yes = "$export_dynamic"; then
+	  # On all known operating systems, these are identical.
+	  dlname=$soname
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for objects"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "'-l' and '-L' are ignored for objects" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "'-rpath' is ignored for objects"
+
+      test -n "$xrpath" && \
+	func_warning "'-R' is ignored for objects"
+
+      test -n "$vinfo" && \
+	func_warning "'-version-info' is ignored for objects"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for objects"
+
+      case $output in
+      *.lo)
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object '$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
+	;;
+      *)
+	libobj=
+	obj=$output
+	;;
+      esac
+
+      # Delete the old objects.
+      $opt_dry_run || $RM $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # if reload_cmds runs $LD directly, get rid of -Wl from
+      # whole_archive_flag_spec and hope we can get by with turning comma
+      # into space.
+      case $reload_cmds in
+        *\$LD[\ \$]*) wl= ;;
+      esac
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
+	else
+	  gentop=$output_objdir/${obj}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # If we're not building shared, we need to use non_pic_objs
+      test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
+
+      # Create the old-style object.
+      reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
+
+      output=$obj
+      func_execute_cmds "$reload_cmds" 'exit $?'
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      test yes = "$build_libtool_libs" || {
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      }
+
+      if test -n "$pic_flag" || test default != "$pic_mode"; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output=$libobj
+	func_execute_cmds "$reload_cmds" 'exit $?'
+      fi
+
+      if test -n "$gentop"; then
+	func_show_eval '${RM}r "$gentop"'
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
+      esac
+      test -n "$vinfo" && \
+	func_warning "'-version-info' is ignored for programs"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for programs"
+
+      $preload \
+	&& test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+	&& func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	;;
+      esac
+
+      case $host in
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test CXX = "$tagname"; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      func_append compile_command " $wl-bind_at_load"
+	      func_append finalize_command " $wl-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      compile_deplibs=$new_libs
+
+
+      func_append compile_command " $compile_deplibs"
+      func_append finalize_command " $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs=$libdir
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append perm_rpath " $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
+	  *) func_append dllsearchpath ":$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir=$hardcode_libdirs
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath=$rpath
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs=$libdir
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_perm_rpath " $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir=$hardcode_libdirs
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath=$rpath
+
+      if test -n "$libobjs" && test yes = "$build_old_libs"; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+      fi
+
+      func_generate_dlsyms "$outputname" "@PROGRAM@" false
+
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
+      fi
+
+      wrappers_required=:
+      case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=false
+        ;;
+      *cygwin* | *mingw* )
+        test yes = "$build_libtool_libs" || wrappers_required=false
+        ;;
+      *)
+        if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+          wrappers_required=false
+        fi
+        ;;
+      esac
+      $wrappers_required || {
+	# Replace the output file specification.
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	link_command=$compile_command$compile_rpath
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	# Delete the generated files.
+	if test -f "$output_objdir/${outputname}S.$objext"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
+	fi
+
+	exit $exit_status
+      }
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test yes = "$no_install"; then
+	# We don't need to create a wrapper script.
+	link_command=$compile_var$compile_command$compile_rpath
+	# Replace the output file specification.
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$opt_dry_run || $RM $output
+	# Link the executable and exit
+	func_show_eval "$link_command" 'exit $?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      case $hardcode_action,$fast_install in
+        relink,*)
+	  # Fast installation is not supported
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+
+	  func_warning "this platform does not like uninstalled shared libraries"
+	  func_warning "'$output' will be relinked during installation"
+	  ;;
+        *,yes)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+          ;;
+	*,no)
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+          ;;
+	*,needless)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=
+          ;;
+      esac
+
+      # Replace the output file specification.
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      func_show_eval "$link_command" 'exit $?'
+
+      if test -n "$postlink_cmds"; then
+	func_to_tool_file "$output_objdir/$outputname"
+	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	func_execute_cmds "$postlink_cmds" 'exit $?'
+      fi
+
+      # Now create the wrapper script.
+      func_verbose "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource=$output_path/$objdir/lt-$output_name.c
+	    cwrapper=$output_path/$output_name.exe
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
+
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host"; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
+	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_wrapper no > $output
+	    chmod +x $output
+	  ;;
+	esac
+      }
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      case $build_libtool_libs in
+        convenience)
+	  oldobjs="$libobjs_save $symfileobj"
+	  addlibs=$convenience
+	  build_libtool_libs=no
+	  ;;
+	module)
+	  oldobjs=$libobjs_save
+	  addlibs=$old_convenience
+	  build_libtool_libs=no
+          ;;
+	*)
+	  oldobjs="$old_deplibs $non_pic_objects"
+	  $preload && test -f "$symfileobj" \
+	    && func_append oldobjs " $symfileobj"
+	  addlibs=$old_convenience
+	  ;;
+      esac
+
+      if test -n "$addlibs"; then
+	gentop=$output_objdir/${outputname}x
+	func_append generated " $gentop"
+
+	func_extract_archives $gentop $addlibs
+	func_append oldobjs " $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
+	cmds=$old_archive_from_new_cmds
+      else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append oldobjs " $func_extract_archives_result"
+	fi
+
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  echo "copying selected object files to avoid basename conflicts..."
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+	  func_mkdir_p "$gentop"
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    func_basename "$obj"
+	    objbase=$func_basename_result
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		func_arith $counter + 1
+		counter=$func_arith_result
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      func_append oldobjs " $gentop/$newobj"
+	      ;;
+	    *) func_append oldobjs " $obj" ;;
+	    esac
+	  done
+	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
+	eval cmds=\"$old_archive_cmds\"
+
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	elif test -n "$archiver_list_spec"; then
+	  func_verbose "using command file archive linking..."
+	  for obj in $oldobjs
+	  do
+	    func_to_tool_file "$obj"
+	    $ECHO "$func_to_tool_file_result"
+	  done > $output_objdir/$libname.libcmd
+	  func_to_tool_file "$output_objdir/$libname.libcmd"
+	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  func_verbose "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
+	  for obj in $save_oldobjs
+	  do
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj"; then
+		RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
+	      objlist=
+	      len=$len0
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test -z "$oldobjs"; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      func_execute_cmds "$cmds" 'exit $?'
+    done
+
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test yes = "$build_old_libs" && old_library=$libname.$libext
+      func_verbose "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      if test yes = "$hardcode_automatic"; then
+	relink_command=
+      fi
+
+      # Only create the output if not a dry run.
+      $opt_dry_run || {
+	for installed in no yes; do
+	  if test yes = "$installed"; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output=$output_objdir/${outputname}i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		func_basename "$deplib"
+		name=$func_basename_result
+		func_resolve_sysroot "$deplib"
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		test -z "$libdir" && \
+		  func_fatal_error "'$deplib' is not a valid libtool archive"
+		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      -L*)
+		func_stripname -L '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -L$func_replace_sysroot_result"
+		;;
+	      -R*)
+		func_stripname -R '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -R$func_replace_sysroot_result"
+		;;
+	      *) func_append newdependency_libs " $deplib" ;;
+	      esac
+	    done
+	    dependency_libs=$newdependency_libs
+	    newdlfiles=
+
+	    for lib in $dlfiles; do
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "'$lib' is not a valid libtool archive"
+		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      *) func_append newdlfiles " $lib" ;;
+	      esac
+	    done
+	    dlfiles=$newdlfiles
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "'$lib' is not a valid libtool archive"
+		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      esac
+	    done
+	    dlprefiles=$newdlprefiles
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlfiles " $abs"
+	    done
+	    dlfiles=$newdlfiles
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlprefiles " $abs"
+	    done
+	    dlprefiles=$newdlprefiles
+	  fi
+	  $RM $output
+	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test -n "$bindir"; then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result/$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
+	  esac
+	  $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that cannot go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test no,yes = "$installed,$need_relink"; then
+	    $ECHO >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      }
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+}
+
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+  func_mode_link ${1+"$@"}
+fi
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $debug_cmd
+
+    RM=$nonopt
+    files=
+    rmforce=false
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic=$magic
+
+    for arg
+    do
+      case $arg in
+      -f) func_append RM " $arg"; rmforce=: ;;
+      -*) func_append RM " $arg" ;;
+      *) func_append files " $arg" ;;
+      esac
+    done
+
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
+
+    rmdirs=
+
+    for file in $files; do
+      func_dirname "$file" "" "."
+      dir=$func_dirname_result
+      if test . = "$dir"; then
+	odir=$objdir
+      else
+	odir=$dir/$objdir
+      fi
+      func_basename "$file"
+      name=$func_basename_result
+      test uninstall = "$opt_mode" && odir=$dir
+
+      # Remember odir for removal later, being careful to avoid duplicates
+      if test clean = "$opt_mode"; then
+	case " $rmdirs " in
+	  *" $odir "*) ;;
+	  *) func_append rmdirs " $odir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif $rmforce; then
+	continue
+      fi
+
+      rmfiles=$file
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    func_append rmfiles " $odir/$n"
+	  done
+	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+	  case $opt_mode in
+	  clean)
+	    case " $library_names " in
+	    *" $dlname "*) ;;
+	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+	    esac
+	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if func_lalib_p "$file"; then
+
+	  # Read the .lo file
+	  func_source $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" && test none != "$pic_object"; then
+	    func_append rmfiles " $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" && test none != "$non_pic_object"; then
+	    func_append rmfiles " $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test clean = "$opt_mode"; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    func_append rmfiles " $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      func_append rmfiles " $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+	    if test yes = "$fast_install" && test -n "$relink_command"; then
+	      func_append rmfiles " $odir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name"; then
+	      func_append rmfiles " $odir/lt-$noexename.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
+    done
+
+    # Try to remove the $objdir's in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
+      fi
+    done
+
+    exit $exit_status
+}
+
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+  func_mode_uninstall ${1+"$@"}
+fi
+
+test -z "$opt_mode" && {
+  help=$generic_help
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode '$opt_mode'"
+
+if test -n "$exec_cmd"; then
+  eval exec "$exec_cmd"
+  exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# where we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/build-aux/mdate-sh b/build-aux/mdate-sh
new file mode 100755
index 0000000..e8dfaca
--- /dev/null
+++ b/build-aux/mdate-sh
@@ -0,0 +1,224 @@
+#!/bin/sh
+# Get modification time of a file or directory and pretty-print it.
+
+scriptversion=2010-08-21.06; # UTC
+
+# Copyright (C) 1995-2014 Free Software Foundation, Inc.
+# written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+fi
+
+case $1 in
+  '')
+     echo "$0: No file.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: mdate-sh [--help] [--version] FILE
+
+Pretty-print the modification day of FILE, in the format:
+1 January 1970
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "mdate-sh $scriptversion"
+    exit $?
+    ;;
+esac
+
+error ()
+{
+  echo "$0: $1" >&2
+  exit 1
+}
+
+
+# Prevent date giving response in another language.
+LANG=C
+export LANG
+LC_ALL=C
+export LC_ALL
+LC_TIME=C
+export LC_TIME
+
+# GNU ls changes its time format in response to the TIME_STYLE
+# variable.  Since we cannot assume 'unset' works, revert this
+# variable to its documented default.
+if test "${TIME_STYLE+set}" = set; then
+  TIME_STYLE=posix-long-iso
+  export TIME_STYLE
+fi
+
+save_arg1=$1
+
+# Find out how to get the extended ls output of a file or directory.
+if ls -L /dev/null 1>/dev/null 2>&1; then
+  ls_command='ls -L -l -d'
+else
+  ls_command='ls -l -d'
+fi
+# Avoid user/group names that might have spaces, when possible.
+if ls -n /dev/null 1>/dev/null 2>&1; then
+  ls_command="$ls_command -n"
+fi
+
+# A 'ls -l' line looks as follows on OS/2.
+#  drwxrwx---        0 Aug 11  2001 foo
+# This differs from Unix, which adds ownership information.
+#  drwxrwx---   2 root  root      4096 Aug 11  2001 foo
+#
+# To find the date, we split the line on spaces and iterate on words
+# until we find a month.  This cannot work with files whose owner is a
+# user named "Jan", or "Feb", etc.  However, it's unlikely that '/'
+# will be owned by a user whose name is a month.  So we first look at
+# the extended ls output of the root directory to decide how many
+# words should be skipped to get the date.
+
+# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
+set x`$ls_command /`
+
+# Find which argument is the month.
+month=
+command=
+until test $month
+do
+  test $# -gt 0 || error "failed parsing '$ls_command /' output"
+  shift
+  # Add another shift to the command.
+  command="$command shift;"
+  case $1 in
+    Jan) month=January; nummonth=1;;
+    Feb) month=February; nummonth=2;;
+    Mar) month=March; nummonth=3;;
+    Apr) month=April; nummonth=4;;
+    May) month=May; nummonth=5;;
+    Jun) month=June; nummonth=6;;
+    Jul) month=July; nummonth=7;;
+    Aug) month=August; nummonth=8;;
+    Sep) month=September; nummonth=9;;
+    Oct) month=October; nummonth=10;;
+    Nov) month=November; nummonth=11;;
+    Dec) month=December; nummonth=12;;
+  esac
+done
+
+test -n "$month" || error "failed parsing '$ls_command /' output"
+
+# Get the extended ls output of the file or directory.
+set dummy x`eval "$ls_command \"\\\$save_arg1\""`
+
+# Remove all preceding arguments
+eval $command
+
+# Because of the dummy argument above, month is in $2.
+#
+# On a POSIX system, we should have
+#
+# $# = 5
+# $1 = file size
+# $2 = month
+# $3 = day
+# $4 = year or time
+# $5 = filename
+#
+# On Darwin 7.7.0 and 7.6.0, we have
+#
+# $# = 4
+# $1 = day
+# $2 = month
+# $3 = year or time
+# $4 = filename
+
+# Get the month.
+case $2 in
+  Jan) month=January; nummonth=1;;
+  Feb) month=February; nummonth=2;;
+  Mar) month=March; nummonth=3;;
+  Apr) month=April; nummonth=4;;
+  May) month=May; nummonth=5;;
+  Jun) month=June; nummonth=6;;
+  Jul) month=July; nummonth=7;;
+  Aug) month=August; nummonth=8;;
+  Sep) month=September; nummonth=9;;
+  Oct) month=October; nummonth=10;;
+  Nov) month=November; nummonth=11;;
+  Dec) month=December; nummonth=12;;
+esac
+
+case $3 in
+  ???*) day=$1;;
+  *) day=$3; shift;;
+esac
+
+# Here we have to deal with the problem that the ls output gives either
+# the time of day or the year.
+case $3 in
+  *:*) set `date`; eval year=\$$#
+       case $2 in
+	 Jan) nummonthtod=1;;
+	 Feb) nummonthtod=2;;
+	 Mar) nummonthtod=3;;
+	 Apr) nummonthtod=4;;
+	 May) nummonthtod=5;;
+	 Jun) nummonthtod=6;;
+	 Jul) nummonthtod=7;;
+	 Aug) nummonthtod=8;;
+	 Sep) nummonthtod=9;;
+	 Oct) nummonthtod=10;;
+	 Nov) nummonthtod=11;;
+	 Dec) nummonthtod=12;;
+       esac
+       # For the first six month of the year the time notation can also
+       # be used for files modified in the last year.
+       if (expr $nummonth \> $nummonthtod) > /dev/null;
+       then
+	 year=`expr $year - 1`
+       fi;;
+  *) year=$3;;
+esac
+
+# The result.
+echo $day $month $year
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/missing b/build-aux/missing
new file mode 100755
index 0000000..f62bbae
--- /dev/null
+++ b/build-aux/missing
@@ -0,0 +1,215 @@
+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2013-10-28.13; # UTC
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try '$0 --help' for more information"
+  exit 1
+fi
+
+case $1 in
+
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'autom4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
+    ;;
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/test-driver b/build-aux/test-driver
new file mode 100755
index 0000000..8e575b0
--- /dev/null
+++ b/build-aux/test-driver
@@ -0,0 +1,148 @@
+#! /bin/sh
+# test-driver - basic testsuite driver script.
+
+scriptversion=2013-07-13.22; # UTC
+
+# Copyright (C) 2011-2014 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+# Make unconditional expansion of undefined variables an error.  This
+# helps a lot in preventing typo-related bugs.
+set -u
+
+usage_error ()
+{
+  echo "$0: $*" >&2
+  print_usage >&2
+  exit 2
+}
+
+print_usage ()
+{
+  cat <<END
+Usage:
+  test-driver --test-name=NAME --log-file=PATH --trs-file=PATH
+              [--expect-failure={yes|no}] [--color-tests={yes|no}]
+              [--enable-hard-errors={yes|no}] [--]
+              TEST-SCRIPT [TEST-SCRIPT-ARGUMENTS]
+The '--test-name', '--log-file' and '--trs-file' options are mandatory.
+END
+}
+
+test_name= # Used for reporting.
+log_file=  # Where to save the output of the test script.
+trs_file=  # Where to save the metadata of the test run.
+expect_failure=no
+color_tests=no
+enable_hard_errors=yes
+while test $# -gt 0; do
+  case $1 in
+  --help) print_usage; exit $?;;
+  --version) echo "test-driver $scriptversion"; exit $?;;
+  --test-name) test_name=$2; shift;;
+  --log-file) log_file=$2; shift;;
+  --trs-file) trs_file=$2; shift;;
+  --color-tests) color_tests=$2; shift;;
+  --expect-failure) expect_failure=$2; shift;;
+  --enable-hard-errors) enable_hard_errors=$2; shift;;
+  --) shift; break;;
+  -*) usage_error "invalid option: '$1'";;
+   *) break;;
+  esac
+  shift
+done
+
+missing_opts=
+test x"$test_name" = x && missing_opts="$missing_opts --test-name"
+test x"$log_file"  = x && missing_opts="$missing_opts --log-file"
+test x"$trs_file"  = x && missing_opts="$missing_opts --trs-file"
+if test x"$missing_opts" != x; then
+  usage_error "the following mandatory options are missing:$missing_opts"
+fi
+
+if test $# -eq 0; then
+  usage_error "missing argument"
+fi
+
+if test $color_tests = yes; then
+  # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
+  red='' # Red.
+  grn='' # Green.
+  lgn='' # Light green.
+  blu='' # Blue.
+  mgn='' # Magenta.
+  std=''     # No color.
+else
+  red= grn= lgn= blu= mgn= std=
+fi
+
+do_exit='rm -f $log_file $trs_file; (exit $st); exit $st'
+trap "st=129; $do_exit" 1
+trap "st=130; $do_exit" 2
+trap "st=141; $do_exit" 13
+trap "st=143; $do_exit" 15
+
+# Test script is run here.
+"$@" >$log_file 2>&1
+estatus=$?
+
+if test $enable_hard_errors = no && test $estatus -eq 99; then
+  tweaked_estatus=1
+else
+  tweaked_estatus=$estatus
+fi
+
+case $tweaked_estatus:$expect_failure in
+  0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
+  0:*)   col=$grn res=PASS  recheck=no  gcopy=no;;
+  77:*)  col=$blu res=SKIP  recheck=no  gcopy=yes;;
+  99:*)  col=$mgn res=ERROR recheck=yes gcopy=yes;;
+  *:yes) col=$lgn res=XFAIL recheck=no  gcopy=yes;;
+  *:*)   col=$red res=FAIL  recheck=yes gcopy=yes;;
+esac
+
+# Report the test outcome and exit status in the logs, so that one can
+# know whether the test passed or failed simply by looking at the '.log'
+# file, without the need of also peaking into the corresponding '.trs'
+# file (automake bug#11814).
+echo "$res $test_name (exit status: $estatus)" >>$log_file
+
+# Report outcome to console.
+echo "${col}${res}${std}: $test_name"
+
+# Register the test result, and other relevant metadata.
+echo ":test-result: $res" > $trs_file
+echo ":global-test-result: $res" >> $trs_file
+echo ":recheck: $recheck" >> $trs_file
+echo ":copy-in-global-log: $gcopy" >> $trs_file
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/build-aux/texinfo.tex b/build-aux/texinfo.tex
new file mode 100644
index 0000000..85f184c
--- /dev/null
+++ b/build-aux/texinfo.tex
@@ -0,0 +1,10079 @@
+% texinfo.tex -- TeX macros to handle Texinfo files.
+% 
+% Load plain if necessary, i.e., if running under initex.
+\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
+%
+\def\texinfoversion{2013-02-01.11}
+%
+% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
+% 2007, 2008, 2009, 2010, 2011, 2012, 2013 Free Software Foundation, Inc.
+%
+% This texinfo.tex file is free software: you can redistribute it and/or
+% modify it under the terms of the GNU General Public License as
+% published by the Free Software Foundation, either version 3 of the
+% License, or (at your option) any later version.
+%
+% This texinfo.tex file is distributed in the hope that it will be
+% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+% General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with this program.  If not, see <http://www.gnu.org/licenses/>.
+%
+% As a special exception, when this file is read by TeX when processing
+% a Texinfo source document, you may use the result without
+% restriction. This Exception is an additional permission under section 7
+% of the GNU General Public License, version 3 ("GPLv3").
+%
+% Please try the latest version of texinfo.tex before submitting bug
+% reports; you can get the latest version from:
+%   http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or
+%   http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or
+%   http://www.gnu.org/software/texinfo/ (the Texinfo home page)
+% The texinfo.tex in any given distribution could well be out
+% of date, so if that's what you're using, please check.
+%
+% Send bug reports to bug-texinfo@gnu.org.  Please include including a
+% complete document in each bug report with which we can reproduce the
+% problem.  Patches are, of course, greatly appreciated.
+%
+% To process a Texinfo manual with TeX, it's most reliable to use the
+% texi2dvi shell script that comes with the distribution.  For a simple
+% manual foo.texi, however, you can get away with this:
+%   tex foo.texi
+%   texindex foo.??
+%   tex foo.texi
+%   tex foo.texi
+%   dvips foo.dvi -o  # or whatever; this makes foo.ps.
+% The extra TeX runs get the cross-reference information correct.
+% Sometimes one run after texindex suffices, and sometimes you need more
+% than two; texi2dvi does it as many times as necessary.
+%
+% It is possible to adapt texinfo.tex for other languages, to some
+% extent.  You can get the existing language-specific files from the
+% full Texinfo distribution.
+%
+% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
+
+
+\message{Loading texinfo [version \texinfoversion]:}
+
+% If in a .fmt file, print the version number
+% and turn on active characters that we couldn't do earlier because
+% they might have appeared in the input file name.
+\everyjob{\message{[Texinfo version \texinfoversion]}%
+  \catcode`+=\active \catcode`\_=\active}
+
+\chardef\other=12
+
+% We never want plain's \outer definition of \+ in Texinfo.
+% For @tex, we can use \tabalign.
+\let\+ = \relax
+
+% Save some plain tex macros whose names we will redefine.
+\let\ptexb=\b
+\let\ptexbullet=\bullet
+\let\ptexc=\c
+\let\ptexcomma=\,
+\let\ptexdot=\.
+\let\ptexdots=\dots
+\let\ptexend=\end
+\let\ptexequiv=\equiv
+\let\ptexexclam=\!
+\let\ptexfootnote=\footnote
+\let\ptexgtr=>
+\let\ptexhat=^
+\let\ptexi=\i
+\let\ptexindent=\indent
+\let\ptexinsert=\insert
+\let\ptexlbrace=\{
+\let\ptexless=<
+\let\ptexnewwrite\newwrite
+\let\ptexnoindent=\noindent
+\let\ptexplus=+
+\let\ptexraggedright=\raggedright
+\let\ptexrbrace=\}
+\let\ptexslash=\/
+\let\ptexstar=\*
+\let\ptext=\t
+\let\ptextop=\top
+{\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode
+
+% If this character appears in an error message or help string, it
+% starts a new line in the output.
+\newlinechar = `^^J
+
+% Use TeX 3.0's \inputlineno to get the line number, for better error
+% messages, but if we're using an old version of TeX, don't do anything.
+%
+\ifx\inputlineno\thisisundefined
+  \let\linenumber = \empty % Pre-3.0.
+\else
+  \def\linenumber{l.\the\inputlineno:\space}
+\fi
+
+% Set up fixed words for English if not already set.
+\ifx\putwordAppendix\undefined  \gdef\putwordAppendix{Appendix}\fi
+\ifx\putwordChapter\undefined   \gdef\putwordChapter{Chapter}\fi
+\ifx\putworderror\undefined     \gdef\putworderror{error}\fi
+\ifx\putwordfile\undefined      \gdef\putwordfile{file}\fi
+\ifx\putwordin\undefined        \gdef\putwordin{in}\fi
+\ifx\putwordIndexIsEmpty\undefined       \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
+\ifx\putwordIndexNonexistent\undefined   \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
+\ifx\putwordInfo\undefined      \gdef\putwordInfo{Info}\fi
+\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
+\ifx\putwordMethodon\undefined  \gdef\putwordMethodon{Method on}\fi
+\ifx\putwordNoTitle\undefined   \gdef\putwordNoTitle{No Title}\fi
+\ifx\putwordof\undefined        \gdef\putwordof{of}\fi
+\ifx\putwordon\undefined        \gdef\putwordon{on}\fi
+\ifx\putwordpage\undefined      \gdef\putwordpage{page}\fi
+\ifx\putwordsection\undefined   \gdef\putwordsection{section}\fi
+\ifx\putwordSection\undefined   \gdef\putwordSection{Section}\fi
+\ifx\putwordsee\undefined       \gdef\putwordsee{see}\fi
+\ifx\putwordSee\undefined       \gdef\putwordSee{See}\fi
+\ifx\putwordShortTOC\undefined  \gdef\putwordShortTOC{Short Contents}\fi
+\ifx\putwordTOC\undefined       \gdef\putwordTOC{Table of Contents}\fi
+%
+\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
+\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
+\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
+\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
+\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
+\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
+\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
+\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
+\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
+\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
+\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
+\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
+%
+\ifx\putwordDefmac\undefined    \gdef\putwordDefmac{Macro}\fi
+\ifx\putwordDefspec\undefined   \gdef\putwordDefspec{Special Form}\fi
+\ifx\putwordDefvar\undefined    \gdef\putwordDefvar{Variable}\fi
+\ifx\putwordDefopt\undefined    \gdef\putwordDefopt{User Option}\fi
+\ifx\putwordDeffunc\undefined   \gdef\putwordDeffunc{Function}\fi
+
+% Since the category of space is not known, we have to be careful.
+\chardef\spacecat = 10
+\def\spaceisspace{\catcode`\ =\spacecat}
+
+% sometimes characters are active, so we need control sequences.
+\chardef\ampChar   = `\&
+\chardef\colonChar = `\:
+\chardef\commaChar = `\,
+\chardef\dashChar  = `\-
+\chardef\dotChar   = `\.
+\chardef\exclamChar= `\!
+\chardef\hashChar  = `\#
+\chardef\lquoteChar= `\`
+\chardef\questChar = `\?
+\chardef\rquoteChar= `\'
+\chardef\semiChar  = `\;
+\chardef\slashChar = `\/
+\chardef\underChar = `\_
+
+% Ignore a token.
+%
+\def\gobble#1{}
+
+% The following is used inside several \edef's.
+\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
+
+% Hyphenation fixes.
+\hyphenation{
+  Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
+  ap-pen-dix bit-map bit-maps
+  data-base data-bases eshell fall-ing half-way long-est man-u-script
+  man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
+  par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
+  spell-ing spell-ings
+  stand-alone strong-est time-stamp time-stamps which-ever white-space
+  wide-spread wrap-around
+}
+
+% Margin to add to right of even pages, to left of odd pages.
+\newdimen\bindingoffset
+\newdimen\normaloffset
+\newdimen\pagewidth \newdimen\pageheight
+
+% For a final copy, take out the rectangles
+% that mark overfull boxes (in case you have decided
+% that the text looks ok even though it passes the margin).
+%
+\def\finalout{\overfullrule=0pt }
+
+% Sometimes it is convenient to have everything in the transcript file
+% and nothing on the terminal.  We don't just call \tracingall here,
+% since that produces some useless output on the terminal.  We also make
+% some effort to order the tracing commands to reduce output in the log
+% file; cf. trace.sty in LaTeX.
+%
+\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
+\def\loggingall{%
+  \tracingstats2
+  \tracingpages1
+  \tracinglostchars2  % 2 gives us more in etex
+  \tracingparagraphs1
+  \tracingoutput1
+  \tracingmacros2
+  \tracingrestores1
+  \showboxbreadth\maxdimen \showboxdepth\maxdimen
+  \ifx\eTeXversion\thisisundefined\else % etex gives us more logging
+    \tracingscantokens1
+    \tracingifs1
+    \tracinggroups1
+    \tracingnesting2
+    \tracingassigns1
+  \fi
+  \tracingcommands3  % 3 gives us more in etex
+  \errorcontextlines16
+}%
+
+% @errormsg{MSG}.  Do the index-like expansions on MSG, but if things
+% aren't perfect, it's not the end of the world, being an error message,
+% after all.
+% 
+\def\errormsg{\begingroup \indexnofonts \doerrormsg}
+\def\doerrormsg#1{\errmessage{#1}}
+
+% add check for \lastpenalty to plain's definitions.  If the last thing
+% we did was a \nobreak, we don't want to insert more space.
+%
+\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
+  \removelastskip\penalty-50\smallskip\fi\fi}
+\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
+  \removelastskip\penalty-100\medskip\fi\fi}
+\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
+  \removelastskip\penalty-200\bigskip\fi\fi}
+
+% Do @cropmarks to get crop marks.
+%
+\newif\ifcropmarks
+\let\cropmarks = \cropmarkstrue
+%
+% Dimensions to add cropmarks at corners.
+% Added by P. A. MacKay, 12 Nov. 1986
+%
+\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
+\newdimen\cornerlong  \cornerlong=1pc
+\newdimen\cornerthick \cornerthick=.3pt
+\newdimen\topandbottommargin \topandbottommargin=.75in
+
+% Output a mark which sets \thischapter, \thissection and \thiscolor.
+% We dump everything together because we only have one kind of mark.
+% This works because we only use \botmark / \topmark, not \firstmark.
+%
+% A mark contains a subexpression of the \ifcase ... \fi construct.
+% \get*marks macros below extract the needed part using \ifcase.
+%
+% Another complication is to let the user choose whether \thischapter
+% (\thissection) refers to the chapter (section) in effect at the top
+% of a page, or that at the bottom of a page.  The solution is
+% described on page 260 of The TeXbook.  It involves outputting two
+% marks for the sectioning macros, one before the section break, and
+% one after.  I won't pretend I can describe this better than DEK...
+\def\domark{%
+  \toks0=\expandafter{\lastchapterdefs}%
+  \toks2=\expandafter{\lastsectiondefs}%
+  \toks4=\expandafter{\prevchapterdefs}%
+  \toks6=\expandafter{\prevsectiondefs}%
+  \toks8=\expandafter{\lastcolordefs}%
+  \mark{%
+                   \the\toks0 \the\toks2
+      \noexpand\or \the\toks4 \the\toks6
+    \noexpand\else \the\toks8
+  }%
+}
+% \topmark doesn't work for the very first chapter (after the title
+% page or the contents), so we use \firstmark there -- this gets us
+% the mark with the chapter defs, unless the user sneaks in, e.g.,
+% @setcolor (or @url, or @link, etc.) between @contents and the very
+% first @chapter.
+\def\gettopheadingmarks{%
+  \ifcase0\topmark\fi
+  \ifx\thischapter\empty \ifcase0\firstmark\fi \fi
+}
+\def\getbottomheadingmarks{\ifcase1\botmark\fi}
+\def\getcolormarks{\ifcase2\topmark\fi}
+
+% Avoid "undefined control sequence" errors.
+\def\lastchapterdefs{}
+\def\lastsectiondefs{}
+\def\prevchapterdefs{}
+\def\prevsectiondefs{}
+\def\lastcolordefs{}
+
+% Main output routine.
+\chardef\PAGE = 255
+\output = {\onepageout{\pagecontents\PAGE}}
+
+\newbox\headlinebox
+\newbox\footlinebox
+
+% \onepageout takes a vbox as an argument.  Note that \pagecontents
+% does insertions, but you have to call it yourself.
+\def\onepageout#1{%
+  \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
+  %
+  \ifodd\pageno  \advance\hoffset by \bindingoffset
+  \else \advance\hoffset by -\bindingoffset\fi
+  %
+  % Do this outside of the \shipout so @code etc. will be expanded in
+  % the headline as they should be, not taken literally (outputting ''code).
+  \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
+  \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
+  \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
+  \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
+  %
+  {%
+    % Have to do this stuff outside the \shipout because we want it to
+    % take effect in \write's, yet the group defined by the \vbox ends
+    % before the \shipout runs.
+    %
+    \indexdummies         % don't expand commands in the output.
+    \normalturnoffactive  % \ in index entries must not stay \, e.g., if
+               % the page break happens to be in the middle of an example.
+               % We don't want .vr (or whatever) entries like this:
+               % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}}
+               % "\acronym" won't work when it's read back in;
+               % it needs to be
+               % {\code {{\tt \backslashcurfont }acronym}
+    \shipout\vbox{%
+      % Do this early so pdf references go to the beginning of the page.
+      \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
+      %
+      \ifcropmarks \vbox to \outervsize\bgroup
+        \hsize = \outerhsize
+        \vskip-\topandbottommargin
+        \vtop to0pt{%
+          \line{\ewtop\hfil\ewtop}%
+          \nointerlineskip
+          \line{%
+            \vbox{\moveleft\cornerthick\nstop}%
+            \hfill
+            \vbox{\moveright\cornerthick\nstop}%
+          }%
+          \vss}%
+        \vskip\topandbottommargin
+        \line\bgroup
+          \hfil % center the page within the outer (page) hsize.
+          \ifodd\pageno\hskip\bindingoffset\fi
+          \vbox\bgroup
+      \fi
+      %
+      \unvbox\headlinebox
+      \pagebody{#1}%
+      \ifdim\ht\footlinebox > 0pt
+        % Only leave this space if the footline is nonempty.
+        % (We lessened \vsize for it in \oddfootingyyy.)
+        % The \baselineskip=24pt in plain's \makefootline has no effect.
+        \vskip 24pt
+        \unvbox\footlinebox
+      \fi
+      %
+      \ifcropmarks
+          \egroup % end of \vbox\bgroup
+        \hfil\egroup % end of (centering) \line\bgroup
+        \vskip\topandbottommargin plus1fill minus1fill
+        \boxmaxdepth = \cornerthick
+        \vbox to0pt{\vss
+          \line{%
+            \vbox{\moveleft\cornerthick\nsbot}%
+            \hfill
+            \vbox{\moveright\cornerthick\nsbot}%
+          }%
+          \nointerlineskip
+          \line{\ewbot\hfil\ewbot}%
+        }%
+      \egroup % \vbox from first cropmarks clause
+      \fi
+    }% end of \shipout\vbox
+  }% end of group with \indexdummies
+  \advancepageno
+  \ifnum\outputpenalty>-20000 \else\dosupereject\fi
+}
+
+\newinsert\margin \dimen\margin=\maxdimen
+
+\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
+{\catcode`\@ =11
+\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
+% marginal hacks, juha@viisa.uucp (Juha Takala)
+\ifvoid\margin\else % marginal info is present
+  \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
+\dimen@=\dp#1\relax \unvbox#1\relax
+\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
+\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
+}
+
+% Here are the rules for the cropmarks.  Note that they are
+% offset so that the space between them is truly \outerhsize or \outervsize
+% (P. A. MacKay, 12 November, 1986)
+%
+\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
+\def\nstop{\vbox
+  {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
+\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
+\def\nsbot{\vbox
+  {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
+
+% Parse an argument, then pass it to #1.  The argument is the rest of
+% the input line (except we remove a trailing comment).  #1 should be a
+% macro which expects an ordinary undelimited TeX argument.
+%
+\def\parsearg{\parseargusing{}}
+\def\parseargusing#1#2{%
+  \def\argtorun{#2}%
+  \begingroup
+    \obeylines
+    \spaceisspace
+    #1%
+    \parseargline\empty% Insert the \empty token, see \finishparsearg below.
+}
+
+{\obeylines %
+  \gdef\parseargline#1^^M{%
+    \endgroup % End of the group started in \parsearg.
+    \argremovecomment #1\comment\ArgTerm%
+  }%
+}
+
+% First remove any @comment, then any @c comment.
+\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
+\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
+
+% Each occurrence of `\^^M' or `<space>\^^M' is replaced by a single space.
+%
+% \argremovec might leave us with trailing space, e.g.,
+%    @end itemize  @c foo
+% This space token undergoes the same procedure and is eventually removed
+% by \finishparsearg.
+%
+\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
+\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
+\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
+  \def\temp{#3}%
+  \ifx\temp\empty
+    % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp:
+    \let\temp\finishparsearg
+  \else
+    \let\temp\argcheckspaces
+  \fi
+  % Put the space token in:
+  \temp#1 #3\ArgTerm
+}
+
+% If a _delimited_ argument is enclosed in braces, they get stripped; so
+% to get _exactly_ the rest of the line, we had to prevent such situation.
+% We prepended an \empty token at the very beginning and we expand it now,
+% just before passing the control to \argtorun.
+% (Similarly, we have to think about #3 of \argcheckspacesY above: it is
+% either the null string, or it ends with \^^M---thus there is no danger
+% that a pair of braces would be stripped.
+%
+% But first, we have to remove the trailing space token.
+%
+\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}}
+
+% \parseargdef\foo{...}
+%	is roughly equivalent to
+% \def\foo{\parsearg\Xfoo}
+% \def\Xfoo#1{...}
+%
+% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my
+% favourite TeX trick.  --kasal, 16nov03
+
+\def\parseargdef#1{%
+  \expandafter \doparseargdef \csname\string#1\endcsname #1%
+}
+\def\doparseargdef#1#2{%
+  \def#2{\parsearg#1}%
+  \def#1##1%
+}
+
+% Several utility definitions with active space:
+{
+  \obeyspaces
+  \gdef\obeyedspace{ }
+
+  % Make each space character in the input produce a normal interword
+  % space in the output.  Don't allow a line break at this space, as this
+  % is used only in environments like @example, where each line of input
+  % should produce a line of output anyway.
+  %
+  \gdef\sepspaces{\obeyspaces\let =\tie}
+
+  % If an index command is used in an @example environment, any spaces
+  % therein should become regular spaces in the raw index file, not the
+  % expansion of \tie (\leavevmode \penalty \@M \ ).
+  \gdef\unsepspaces{\let =\space}
+}
+
+
+\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
+
+% Define the framework for environments in texinfo.tex.  It's used like this:
+%
+%   \envdef\foo{...}
+%   \def\Efoo{...}
+%
+% It's the responsibility of \envdef to insert \begingroup before the
+% actual body; @end closes the group after calling \Efoo.  \envdef also
+% defines \thisenv, so the current environment is known; @end checks
+% whether the environment name matches.  The \checkenv macro can also be
+% used to check whether the current environment is the one expected.
+%
+% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
+% are not treated as environments; they don't open a group.  (The
+% implementation of @end takes care not to call \endgroup in this
+% special case.)
+
+
+% At run-time, environments start with this:
+\def\startenvironment#1{\begingroup\def\thisenv{#1}}
+% initialize
+\let\thisenv\empty
+
+% ... but they get defined via ``\envdef\foo{...}'':
+\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
+\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
+
+% Check whether we're in the right environment:
+\def\checkenv#1{%
+  \def\temp{#1}%
+  \ifx\thisenv\temp
+  \else
+    \badenverr
+  \fi
+}
+
+% Environment mismatch, #1 expected:
+\def\badenverr{%
+  \errhelp = \EMsimple
+  \errmessage{This command can appear only \inenvironment\temp,
+    not \inenvironment\thisenv}%
+}
+\def\inenvironment#1{%
+  \ifx#1\empty
+    outside of any environment%
+  \else
+    in environment \expandafter\string#1%
+  \fi
+}
+
+% @end foo executes the definition of \Efoo.
+% But first, it executes a specialized version of \checkenv
+%
+\parseargdef\end{%
+  \if 1\csname iscond.#1\endcsname
+  \else
+    % The general wording of \badenverr may not be ideal.
+    \expandafter\checkenv\csname#1\endcsname
+    \csname E#1\endcsname
+    \endgroup
+  \fi
+}
+
+\newhelp\EMsimple{Press RETURN to continue.}
+
+
+% Be sure we're in horizontal mode when doing a tie, since we make space
+% equivalent to this in @example-like environments. Otherwise, a space
+% at the beginning of a line will start with \penalty -- and
+% since \penalty is valid in vertical mode, we'd end up putting the
+% penalty on the vertical list instead of in the new paragraph.
+{\catcode`@ = 11
+ % Avoid using \@M directly, because that causes trouble
+ % if the definition is written into an index file.
+ \global\let\tiepenalty = \@M
+ \gdef\tie{\leavevmode\penalty\tiepenalty\ }
+}
+
+% @: forces normal size whitespace following.
+\def\:{\spacefactor=1000 }
+
+% @* forces a line break.
+\def\*{\unskip\hfil\break\hbox{}\ignorespaces}
+
+% @/ allows a line break.
+\let\/=\allowbreak
+
+% @. is an end-of-sentence period.
+\def\.{.\spacefactor=\endofsentencespacefactor\space}
+
+% @! is an end-of-sentence bang.
+\def\!{!\spacefactor=\endofsentencespacefactor\space}
+
+% @? is an end-of-sentence query.
+\def\?{?\spacefactor=\endofsentencespacefactor\space}
+
+% @frenchspacing on|off  says whether to put extra space after punctuation.
+%
+\def\onword{on}
+\def\offword{off}
+%
+\parseargdef\frenchspacing{%
+  \def\temp{#1}%
+  \ifx\temp\onword \plainfrenchspacing
+  \else\ifx\temp\offword \plainnonfrenchspacing
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @frenchspacing option `\temp', must be on|off}%
+  \fi\fi
+}
+
+% @w prevents a word break.  Without the \leavevmode, @w at the
+% beginning of a paragraph, when TeX is still in vertical mode, would
+% produce a whole line of output instead of starting the paragraph.
+\def\w#1{\leavevmode\hbox{#1}}
+
+% @group ... @end group forces ... to be all on one page, by enclosing
+% it in a TeX vbox.  We use \vtop instead of \vbox to construct the box
+% to keep its height that of a normal line.  According to the rules for
+% \topskip (p.114 of the TeXbook), the glue inserted is
+% max (\topskip - \ht (first item), 0).  If that height is large,
+% therefore, no glue is inserted, and the space between the headline and
+% the text is small, which looks bad.
+%
+% Another complication is that the group might be very large.  This can
+% cause the glue on the previous page to be unduly stretched, because it
+% does not have much material.  In this case, it's better to add an
+% explicit \vfill so that the extra space is at the bottom.  The
+% threshold for doing this is if the group is more than \vfilllimit
+% percent of a page (\vfilllimit can be changed inside of @tex).
+%
+\newbox\groupbox
+\def\vfilllimit{0.7}
+%
+\envdef\group{%
+  \ifnum\catcode`\^^M=\active \else
+    \errhelp = \groupinvalidhelp
+    \errmessage{@group invalid in context where filling is enabled}%
+  \fi
+  \startsavinginserts
+  %
+  \setbox\groupbox = \vtop\bgroup
+    % Do @comment since we are called inside an environment such as
+    % @example, where each end-of-line in the input causes an
+    % end-of-line in the output.  We don't want the end-of-line after
+    % the `@group' to put extra space in the output.  Since @group
+    % should appear on a line by itself (according to the Texinfo
+    % manual), we don't worry about eating any user text.
+    \comment
+}
+%
+% The \vtop produces a box with normal height and large depth; thus, TeX puts
+% \baselineskip glue before it, and (when the next line of text is done)
+% \lineskip glue after it.  Thus, space below is not quite equal to space
+% above.  But it's pretty close.
+\def\Egroup{%
+    % To get correct interline space between the last line of the group
+    % and the first line afterwards, we have to propagate \prevdepth.
+    \endgraf % Not \par, as it may have been set to \lisppar.
+    \global\dimen1 = \prevdepth
+  \egroup           % End the \vtop.
+  % \dimen0 is the vertical size of the group's box.
+  \dimen0 = \ht\groupbox  \advance\dimen0 by \dp\groupbox
+  % \dimen2 is how much space is left on the page (more or less).
+  \dimen2 = \pageheight   \advance\dimen2 by -\pagetotal
+  % if the group doesn't fit on the current page, and it's a big big
+  % group, force a page break.
+  \ifdim \dimen0 > \dimen2
+    \ifdim \pagetotal < \vfilllimit\pageheight
+      \page
+    \fi
+  \fi
+  \box\groupbox
+  \prevdepth = \dimen1
+  \checkinserts
+}
+%
+% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
+% message, so this ends up printing `@group can only ...'.
+%
+\newhelp\groupinvalidhelp{%
+group can only be used in environments such as @example,^^J%
+where each line of input produces a line of output.}
+
+% @need space-in-mils
+% forces a page break if there is not space-in-mils remaining.
+
+\newdimen\mil  \mil=0.001in
+
+\parseargdef\need{%
+  % Ensure vertical mode, so we don't make a big box in the middle of a
+  % paragraph.
+  \par
+  %
+  % If the @need value is less than one line space, it's useless.
+  \dimen0 = #1\mil
+  \dimen2 = \ht\strutbox
+  \advance\dimen2 by \dp\strutbox
+  \ifdim\dimen0 > \dimen2
+    %
+    % Do a \strut just to make the height of this box be normal, so the
+    % normal leading is inserted relative to the preceding line.
+    % And a page break here is fine.
+    \vtop to #1\mil{\strut\vfil}%
+    %
+    % TeX does not even consider page breaks if a penalty added to the
+    % main vertical list is 10000 or more.  But in order to see if the
+    % empty box we just added fits on the page, we must make it consider
+    % page breaks.  On the other hand, we don't want to actually break the
+    % page after the empty box.  So we use a penalty of 9999.
+    %
+    % There is an extremely small chance that TeX will actually break the
+    % page at this \penalty, if there are no other feasible breakpoints in
+    % sight.  (If the user is using lots of big @group commands, which
+    % almost-but-not-quite fill up a page, TeX will have a hard time doing
+    % good page breaking, for example.)  However, I could not construct an
+    % example where a page broke at this \penalty; if it happens in a real
+    % document, then we can reconsider our strategy.
+    \penalty9999
+    %
+    % Back up by the size of the box, whether we did a page break or not.
+    \kern -#1\mil
+    %
+    % Do not allow a page break right after this kern.
+    \nobreak
+  \fi
+}
+
+% @br   forces paragraph break (and is undocumented).
+
+\let\br = \par
+
+% @page forces the start of a new page.
+%
+\def\page{\par\vfill\supereject}
+
+% @exdent text....
+% outputs text on separate line in roman font, starting at standard page margin
+
+% This records the amount of indent in the innermost environment.
+% That's how much \exdent should take out.
+\newskip\exdentamount
+
+% This defn is used inside fill environments such as @defun.
+\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
+
+% This defn is used inside nofill environments such as @example.
+\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
+  \leftline{\hskip\leftskip{\rm#1}}}}
+
+% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
+% paragraph.  For more general purposes, use the \margin insertion
+% class.  WHICH is `l' or `r'.  Not documented, written for gawk manual.
+%
+\newskip\inmarginspacing \inmarginspacing=1cm
+\def\strutdepth{\dp\strutbox}
+%
+\def\doinmargin#1#2{\strut\vadjust{%
+  \nobreak
+  \kern-\strutdepth
+  \vtop to \strutdepth{%
+    \baselineskip=\strutdepth
+    \vss
+    % if you have multiple lines of stuff to put here, you'll need to
+    % make the vbox yourself of the appropriate size.
+    \ifx#1l%
+      \llap{\ignorespaces #2\hskip\inmarginspacing}%
+    \else
+      \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
+    \fi
+    \null
+  }%
+}}
+\def\inleftmargin{\doinmargin l}
+\def\inrightmargin{\doinmargin r}
+%
+% @inmargin{TEXT [, RIGHT-TEXT]}
+% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
+% else use TEXT for both).
+%
+\def\inmargin#1{\parseinmargin #1,,\finish}
+\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
+  \setbox0 = \hbox{\ignorespaces #2}%
+  \ifdim\wd0 > 0pt
+    \def\lefttext{#1}%  have both texts
+    \def\righttext{#2}%
+  \else
+    \def\lefttext{#1}%  have only one text
+    \def\righttext{#1}%
+  \fi
+  %
+  \ifodd\pageno
+    \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
+  \else
+    \def\temp{\inleftmargin\lefttext}%
+  \fi
+  \temp
+}
+
+% @| inserts a changebar to the left of the current line.  It should
+% surround any changed text.  This approach does *not* work if the
+% change spans more than two lines of output.  To handle that, we would
+% have adopt a much more difficult approach (putting marks into the main
+% vertical list for the beginning and end of each change).  This command
+% is not documented, not supported, and doesn't work.
+%
+\def\|{%
+  % \vadjust can only be used in horizontal mode.
+  \leavevmode
+  %
+  % Append this vertical mode material after the current line in the output.
+  \vadjust{%
+    % We want to insert a rule with the height and depth of the current
+    % leading; that is exactly what \strutbox is supposed to record.
+    \vskip-\baselineskip
+    %
+    % \vadjust-items are inserted at the left edge of the type.  So
+    % the \llap here moves out into the left-hand margin.
+    \llap{%
+      %
+      % For a thicker or thinner bar, change the `1pt'.
+      \vrule height\baselineskip width1pt
+      %
+      % This is the space between the bar and the text.
+      \hskip 12pt
+    }%
+  }%
+}
+
+% @include FILE -- \input text of FILE.
+%
+\def\include{\parseargusing\filenamecatcodes\includezzz}
+\def\includezzz#1{%
+  \pushthisfilestack
+  \def\thisfile{#1}%
+  {%
+    \makevalueexpandable  % we want to expand any @value in FILE.
+    \turnoffactive        % and allow special characters in the expansion
+    \indexnofonts         % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @include of #1^^J}%
+    \edef\temp{\noexpand\input #1 }%
+    %
+    % This trickery is to read FILE outside of a group, in case it makes
+    % definitions, etc.
+    \expandafter
+  }\temp
+  \popthisfilestack
+}
+\def\filenamecatcodes{%
+  \catcode`\\=\other
+  \catcode`~=\other
+  \catcode`^=\other
+  \catcode`_=\other
+  \catcode`|=\other
+  \catcode`<=\other
+  \catcode`>=\other
+  \catcode`+=\other
+  \catcode`-=\other
+  \catcode`\`=\other
+  \catcode`\'=\other
+}
+
+\def\pushthisfilestack{%
+  \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
+}
+\def\pushthisfilestackX{%
+  \expandafter\pushthisfilestackY\thisfile\StackTerm
+}
+\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
+  \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
+}
+
+\def\popthisfilestack{\errthisfilestackempty}
+\def\errthisfilestackempty{\errmessage{Internal error:
+  the stack of filenames is empty.}}
+%
+\def\thisfile{}
+
+% @center line
+% outputs that line, centered.
+%
+\parseargdef\center{%
+  \ifhmode
+    \let\centersub\centerH
+  \else
+    \let\centersub\centerV
+  \fi
+  \centersub{\hfil \ignorespaces#1\unskip \hfil}%
+  \let\centersub\relax % don't let the definition persist, just in case
+}
+\def\centerH#1{{%
+  \hfil\break
+  \advance\hsize by -\leftskip
+  \advance\hsize by -\rightskip
+  \line{#1}%
+  \break
+}}
+%
+\newcount\centerpenalty
+\def\centerV#1{%
+  % The idea here is the same as in \startdefun, \cartouche, etc.: if
+  % @center is the first thing after a section heading, we need to wipe
+  % out the negative parskip inserted by \sectionheading, but still
+  % prevent a page break here.
+  \centerpenalty = \lastpenalty
+  \ifnum\centerpenalty>10000 \vskip\parskip \fi
+  \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi
+  \line{\kern\leftskip #1\kern\rightskip}%
+}
+
+% @sp n   outputs n lines of vertical space
+%
+\parseargdef\sp{\vskip #1\baselineskip}
+
+% @comment ...line which is ignored...
+% @c is the same as @comment
+% @ignore ... @end ignore  is another way to write a comment
+%
+\def\comment{\begingroup \catcode`\^^M=\other%
+\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
+\commentxxx}
+{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
+%
+\let\c=\comment
+
+% @paragraphindent NCHARS
+% We'll use ems for NCHARS, close enough.
+% NCHARS can also be the word `asis' or `none'.
+% We cannot feasibly implement @paragraphindent asis, though.
+%
+\def\asisword{asis} % no translation, these are keywords
+\def\noneword{none}
+%
+\parseargdef\paragraphindent{%
+  \def\temp{#1}%
+  \ifx\temp\asisword
+  \else
+    \ifx\temp\noneword
+      \defaultparindent = 0pt
+    \else
+      \defaultparindent = #1em
+    \fi
+  \fi
+  \parindent = \defaultparindent
+}
+
+% @exampleindent NCHARS
+% We'll use ems for NCHARS like @paragraphindent.
+% It seems @exampleindent asis isn't necessary, but
+% I preserve it to make it similar to @paragraphindent.
+\parseargdef\exampleindent{%
+  \def\temp{#1}%
+  \ifx\temp\asisword
+  \else
+    \ifx\temp\noneword
+      \lispnarrowing = 0pt
+    \else
+      \lispnarrowing = #1em
+    \fi
+  \fi
+}
+
+% @firstparagraphindent WORD
+% If WORD is `none', then suppress indentation of the first paragraph
+% after a section heading.  If WORD is `insert', then do indent at such
+% paragraphs.
+%
+% The paragraph indentation is suppressed or not by calling
+% \suppressfirstparagraphindent, which the sectioning commands do.
+% We switch the definition of this back and forth according to WORD.
+% By default, we suppress indentation.
+%
+\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
+\def\insertword{insert}
+%
+\parseargdef\firstparagraphindent{%
+  \def\temp{#1}%
+  \ifx\temp\noneword
+    \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
+  \else\ifx\temp\insertword
+    \let\suppressfirstparagraphindent = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @firstparagraphindent option `\temp'}%
+  \fi\fi
+}
+
+% Here is how we actually suppress indentation.  Redefine \everypar to
+% \kern backwards by \parindent, and then reset itself to empty.
+%
+% We also make \indent itself not actually do anything until the next
+% paragraph.
+%
+\gdef\dosuppressfirstparagraphindent{%
+  \gdef\indent{%
+    \restorefirstparagraphindent
+    \indent
+  }%
+  \gdef\noindent{%
+    \restorefirstparagraphindent
+    \noindent
+  }%
+  \global\everypar = {%
+    \kern -\parindent
+    \restorefirstparagraphindent
+  }%
+}
+
+\gdef\restorefirstparagraphindent{%
+  \global \let \indent = \ptexindent
+  \global \let \noindent = \ptexnoindent
+  \global \everypar = {}%
+}
+
+
+% @refill is a no-op.
+\let\refill=\relax
+
+% If working on a large document in chapters, it is convenient to
+% be able to disable indexing, cross-referencing, and contents, for test runs.
+% This is done with @novalidate (before @setfilename).
+%
+\newif\iflinks \linkstrue % by default we want the aux files.
+\let\novalidate = \linksfalse
+
+% @setfilename is done at the beginning of every texinfo file.
+% So open here the files we need to have open while reading the input.
+% This makes it possible to make a .fmt file for texinfo.
+\def\setfilename{%
+   \fixbackslash  % Turn off hack to swallow `\input texinfo'.
+   \iflinks
+     \tryauxfile
+     % Open the new aux file.  TeX will close it automatically at exit.
+     \immediate\openout\auxfile=\jobname.aux
+   \fi % \openindices needs to do some work in any case.
+   \openindices
+   \let\setfilename=\comment % Ignore extra @setfilename cmds.
+   %
+   % If texinfo.cnf is present on the system, read it.
+   % Useful for site-wide @afourpaper, etc.
+   \openin 1 texinfo.cnf
+   \ifeof 1 \else \input texinfo.cnf \fi
+   \closein 1
+   %
+   \comment % Ignore the actual filename.
+}
+
+% Called from \setfilename.
+%
+\def\openindices{%
+  \newindex{cp}%
+  \newcodeindex{fn}%
+  \newcodeindex{vr}%
+  \newcodeindex{tp}%
+  \newcodeindex{ky}%
+  \newcodeindex{pg}%
+}
+
+% @bye.
+\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
+
+
+\message{pdf,}
+% adobe `portable' document format
+\newcount\tempnum
+\newcount\lnkcount
+\newtoks\filename
+\newcount\filenamelength
+\newcount\pgn
+\newtoks\toksA
+\newtoks\toksB
+\newtoks\toksC
+\newtoks\toksD
+\newbox\boxA
+\newcount\countA
+\newif\ifpdf
+\newif\ifpdfmakepagedest
+
+% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
+% can be set).  So we test for \relax and 0 as well as being undefined.
+\ifx\pdfoutput\thisisundefined
+\else
+  \ifx\pdfoutput\relax
+  \else
+    \ifcase\pdfoutput
+    \else
+      \pdftrue
+    \fi
+  \fi
+\fi
+
+% PDF uses PostScript string constants for the names of xref targets,
+% for display in the outlines, and in other places.  Thus, we have to
+% double any backslashes.  Otherwise, a name like "\node" will be
+% interpreted as a newline (\n), followed by o, d, e.  Not good.
+% 
+% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
+% related messages.  The final outcome is that it is up to the TeX user
+% to double the backslashes and otherwise make the string valid, so
+% that's what we do.  pdftex 1.30.0 (ca.2005) introduced a primitive to
+% do this reliably, so we use it.
+
+% #1 is a control sequence in which to do the replacements,
+% which we \xdef.
+\def\txiescapepdf#1{%
+  \ifx\pdfescapestring\thisisundefined
+    % No primitive available; should we give a warning or log?
+    % Many times it won't matter.
+  \else
+    % The expandable \pdfescapestring primitive escapes parentheses,
+    % backslashes, and other special chars.
+    \xdef#1{\pdfescapestring{#1}}%
+  \fi
+}
+
+\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
+with PDF output, and none of those formats could be found.  (.eps cannot
+be supported due to the design of the PDF format; use regular TeX (DVI
+output) for that.)}
+
+\ifpdf
+  %
+  % Color manipulation macros based on pdfcolor.tex,
+  % except using rgb instead of cmyk; the latter is said to render as a
+  % very dark gray on-screen and a very dark halftone in print, instead
+  % of actual black.
+  \def\rgbDarkRed{0.50 0.09 0.12}
+  \def\rgbBlack{0 0 0}
+  %
+  % k sets the color for filling (usual text, etc.);
+  % K sets the color for stroking (thin rules, e.g., normal _'s).
+  \def\pdfsetcolor#1{\pdfliteral{#1 rg  #1 RG}}
+  %
+  % Set color, and create a mark which defines \thiscolor accordingly,
+  % so that \makeheadline knows which color to restore.
+  \def\setcolor#1{%
+    \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}%
+    \domark
+    \pdfsetcolor{#1}%
+  }
+  %
+  \def\maincolor{\rgbBlack}
+  \pdfsetcolor{\maincolor}
+  \edef\thiscolor{\maincolor}
+  \def\lastcolordefs{}
+  %
+  \def\makefootline{%
+    \baselineskip24pt
+    \line{\pdfsetcolor{\maincolor}\the\footline}%
+  }
+  %
+  \def\makeheadline{%
+    \vbox to 0pt{%
+      \vskip-22.5pt
+      \line{%
+        \vbox to8.5pt{}%
+        % Extract \thiscolor definition from the marks.
+        \getcolormarks
+        % Typeset the headline with \maincolor, then restore the color.
+        \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}%
+      }%
+      \vss
+    }%
+    \nointerlineskip
+  }
+  %
+  %
+  \pdfcatalog{/PageMode /UseOutlines}
+  %
+  % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
+  \def\dopdfimage#1#2#3{%
+    \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+    \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+    %
+    % pdftex (and the PDF format) support .pdf, .png, .jpg (among
+    % others).  Let's try in that order, PDF first since if
+    % someone has a scalable image, presumably better to use that than a
+    % bitmap.
+    \let\pdfimgext=\empty
+    \begingroup
+      \openin 1 #1.pdf \ifeof 1
+        \openin 1 #1.PDF \ifeof 1
+          \openin 1 #1.png \ifeof 1
+            \openin 1 #1.jpg \ifeof 1
+              \openin 1 #1.jpeg \ifeof 1
+                \openin 1 #1.JPG \ifeof 1
+                  \errhelp = \nopdfimagehelp
+                  \errmessage{Could not find image file #1 for pdf}%
+                \else \gdef\pdfimgext{JPG}%
+                \fi
+              \else \gdef\pdfimgext{jpeg}%
+              \fi
+            \else \gdef\pdfimgext{jpg}%
+            \fi
+          \else \gdef\pdfimgext{png}%
+          \fi
+        \else \gdef\pdfimgext{PDF}%
+        \fi
+      \else \gdef\pdfimgext{pdf}%
+      \fi
+      \closein 1
+    \endgroup
+    %
+    % without \immediate, ancient pdftex seg faults when the same image is
+    % included twice.  (Version 3.14159-pre-1.0-unofficial-20010704.)
+    \ifnum\pdftexversion < 14
+      \immediate\pdfimage
+    \else
+      \immediate\pdfximage
+    \fi
+      \ifdim \wd0 >0pt width \pdfimagewidth \fi
+      \ifdim \wd2 >0pt height \pdfimageheight \fi
+      \ifnum\pdftexversion<13
+         #1.\pdfimgext
+       \else
+         {#1.\pdfimgext}%
+       \fi
+    \ifnum\pdftexversion < 14 \else
+      \pdfrefximage \pdflastximage
+    \fi}
+  %
+  \def\pdfmkdest#1{{%
+    % We have to set dummies so commands such as @code, and characters
+    % such as \, aren't expanded when present in a section title.
+    \indexnofonts
+    \turnoffactive
+    \makevalueexpandable
+    \def\pdfdestname{#1}%
+    \txiescapepdf\pdfdestname
+    \safewhatsit{\pdfdest name{\pdfdestname} xyz}%
+  }}
+  %
+  % used to mark target names; must be expandable.
+  \def\pdfmkpgn#1{#1}
+  %
+  % by default, use a color that is dark enough to print on paper as
+  % nearly black, but still distinguishable for online viewing.
+  \def\urlcolor{\rgbDarkRed}
+  \def\linkcolor{\rgbDarkRed}
+  \def\endlink{\setcolor{\maincolor}\pdfendlink}
+  %
+  % Adding outlines to PDF; macros for calculating structure of outlines
+  % come from Petr Olsak
+  \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
+    \else \csname#1\endcsname \fi}
+  \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
+    \advance\tempnum by 1
+    \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
+  %
+  % #1 is the section text, which is what will be displayed in the
+  % outline by the pdf viewer.  #2 is the pdf expression for the number
+  % of subentries (or empty, for subsubsections).  #3 is the node text,
+  % which might be empty if this toc entry had no corresponding node.
+  % #4 is the page number
+  %
+  \def\dopdfoutline#1#2#3#4{%
+    % Generate a link to the node text if that exists; else, use the
+    % page number.  We could generate a destination for the section
+    % text in the case where a section has no node, but it doesn't
+    % seem worth the trouble, since most documents are normally structured.
+    \edef\pdfoutlinedest{#3}%
+    \ifx\pdfoutlinedest\empty
+      \def\pdfoutlinedest{#4}%
+    \else
+      \txiescapepdf\pdfoutlinedest
+    \fi
+    %
+    % Also escape PDF chars in the display string.
+    \edef\pdfoutlinetext{#1}%
+    \txiescapepdf\pdfoutlinetext
+    %
+    \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
+  }
+  %
+  \def\pdfmakeoutlines{%
+    \begingroup
+      % Read toc silently, to get counts of subentries for \pdfoutline.
+      \def\partentry##1##2##3##4{}% ignore parts in the outlines
+      \def\numchapentry##1##2##3##4{%
+	\def\thischapnum{##2}%
+	\def\thissecnum{0}%
+	\def\thissubsecnum{0}%
+      }%
+      \def\numsecentry##1##2##3##4{%
+	\advancenumber{chap\thischapnum}%
+	\def\thissecnum{##2}%
+	\def\thissubsecnum{0}%
+      }%
+      \def\numsubsecentry##1##2##3##4{%
+	\advancenumber{sec\thissecnum}%
+	\def\thissubsecnum{##2}%
+      }%
+      \def\numsubsubsecentry##1##2##3##4{%
+	\advancenumber{subsec\thissubsecnum}%
+      }%
+      \def\thischapnum{0}%
+      \def\thissecnum{0}%
+      \def\thissubsecnum{0}%
+      %
+      % use \def rather than \let here because we redefine \chapentry et
+      % al. a second time, below.
+      \def\appentry{\numchapentry}%
+      \def\appsecentry{\numsecentry}%
+      \def\appsubsecentry{\numsubsecentry}%
+      \def\appsubsubsecentry{\numsubsubsecentry}%
+      \def\unnchapentry{\numchapentry}%
+      \def\unnsecentry{\numsecentry}%
+      \def\unnsubsecentry{\numsubsecentry}%
+      \def\unnsubsubsecentry{\numsubsubsecentry}%
+      \readdatafile{toc}%
+      %
+      % Read toc second time, this time actually producing the outlines.
+      % The `-' means take the \expnumber as the absolute number of
+      % subentries, which we calculated on our first read of the .toc above.
+      %
+      % We use the node names as the destinations.
+      \def\numchapentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
+      \def\numsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
+      \def\numsubsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
+      \def\numsubsubsecentry##1##2##3##4{% count is always zero
+        \dopdfoutline{##1}{}{##3}{##4}}%
+      %
+      % PDF outlines are displayed using system fonts, instead of
+      % document fonts.  Therefore we cannot use special characters,
+      % since the encoding is unknown.  For example, the eogonek from
+      % Latin 2 (0xea) gets translated to a | character.  Info from
+      % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
+      %
+      % TODO this right, we have to translate 8-bit characters to
+      % their "best" equivalent, based on the @documentencoding.  Too
+      % much work for too little return.  Just use the ASCII equivalents
+      % we use for the index sort strings.
+      % 
+      \indexnofonts
+      \setupdatafile
+      % We can have normal brace characters in the PDF outlines, unlike
+      % Texinfo index files.  So set that up.
+      \def\{{\lbracecharliteral}%
+      \def\}{\rbracecharliteral}%
+      \catcode`\\=\active \otherbackslash
+      \input \tocreadfilename
+    \endgroup
+  }
+  {\catcode`[=1 \catcode`]=2
+   \catcode`{=\other \catcode`}=\other
+   \gdef\lbracecharliteral[{]%
+   \gdef\rbracecharliteral[}]%
+  ]
+  %
+  \def\skipspaces#1{\def\PP{#1}\def\D{|}%
+    \ifx\PP\D\let\nextsp\relax
+    \else\let\nextsp\skipspaces
+      \addtokens{\filename}{\PP}%
+      \advance\filenamelength by 1
+    \fi
+    \nextsp}
+  \def\getfilename#1{%
+    \filenamelength=0
+    % If we don't expand the argument now, \skipspaces will get
+    % snagged on things like "@value{foo}".
+    \edef\temp{#1}%
+    \expandafter\skipspaces\temp|\relax
+  }
+  \ifnum\pdftexversion < 14
+    \let \startlink \pdfannotlink
+  \else
+    \let \startlink \pdfstartlink
+  \fi
+  % make a live url in pdf output.
+  \def\pdfurl#1{%
+    \begingroup
+      % it seems we really need yet another set of dummies; have not
+      % tried to figure out what each command should do in the context
+      % of @url.  for now, just make @/ a no-op, that's the only one
+      % people have actually reported a problem with.
+      %
+      \normalturnoffactive
+      \def\@{@}%
+      \let\/=\empty
+      \makevalueexpandable
+      % do we want to go so far as to use \indexnofonts instead of just
+      % special-casing \var here?
+      \def\var##1{##1}%
+      %
+      \leavevmode\setcolor{\urlcolor}%
+      \startlink attr{/Border [0 0 0]}%
+        user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
+    \endgroup}
+  \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
+  \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
+  \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
+  \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
+  \def\maketoks{%
+    \expandafter\poptoks\the\toksA|ENDTOKS|\relax
+    \ifx\first0\adn0
+    \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
+    \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
+    \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
+    \else
+      \ifnum0=\countA\else\makelink\fi
+      \ifx\first.\let\next=\done\else
+        \let\next=\maketoks
+        \addtokens{\toksB}{\the\toksD}
+        \ifx\first,\addtokens{\toksB}{\space}\fi
+      \fi
+    \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+    \next}
+  \def\makelink{\addtokens{\toksB}%
+    {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
+  \def\pdflink#1{%
+    \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
+    \setcolor{\linkcolor}#1\endlink}
+  \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
+\else
+  % non-pdf mode
+  \let\pdfmkdest = \gobble
+  \let\pdfurl = \gobble
+  \let\endlink = \relax
+  \let\setcolor = \gobble
+  \let\pdfsetcolor = \gobble
+  \let\pdfmakeoutlines = \relax
+\fi  % \ifx\pdfoutput
+
+
+\message{fonts,}
+
+% Change the current font style to #1, remembering it in \curfontstyle.
+% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
+% italics, not bold italics.
+%
+\def\setfontstyle#1{%
+  \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
+  \csname ten#1\endcsname  % change the current font
+}
+
+% Select #1 fonts with the current style.
+%
+\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
+
+\def\rm{\fam=0 \setfontstyle{rm}}
+\def\it{\fam=\itfam \setfontstyle{it}}
+\def\sl{\fam=\slfam \setfontstyle{sl}}
+\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
+\def\tt{\fam=\ttfam \setfontstyle{tt}}
+
+% Unfortunately, we have to override this for titles and the like, since
+% in those cases "rm" is bold.  Sigh.
+\def\rmisbold{\rm\def\curfontstyle{bf}}
+
+% Texinfo sort of supports the sans serif font style, which plain TeX does not.
+% So we set up a \sf.
+\newfam\sffam
+\def\sf{\fam=\sffam \setfontstyle{sf}}
+\let\li = \sf % Sometimes we call it \li, not \sf.
+
+% We don't need math for this font style.
+\def\ttsl{\setfontstyle{ttsl}}
+
+
+% Set the baselineskip to #1, and the lineskip and strut size
+% correspondingly.  There is no deep meaning behind these magic numbers
+% used as factors; they just match (closely enough) what Knuth defined.
+%
+\def\lineskipfactor{.08333}
+\def\strutheightpercent{.70833}
+\def\strutdepthpercent {.29167}
+%
+% can get a sort of poor man's double spacing by redefining this.
+\def\baselinefactor{1}
+%
+\newdimen\textleading
+\def\setleading#1{%
+  \dimen0 = #1\relax
+  \normalbaselineskip = \baselinefactor\dimen0
+  \normallineskip = \lineskipfactor\normalbaselineskip
+  \normalbaselines
+  \setbox\strutbox =\hbox{%
+    \vrule width0pt height\strutheightpercent\baselineskip
+                    depth \strutdepthpercent \baselineskip
+  }%
+}
+
+% PDF CMaps.  See also LaTeX's t1.cmap.
+%
+% do nothing with this by default.
+\expandafter\let\csname cmapOT1\endcsname\gobble
+\expandafter\let\csname cmapOT1IT\endcsname\gobble
+\expandafter\let\csname cmapOT1TT\endcsname\gobble
+
+% if we are producing pdf, and we have \pdffontattr, then define cmaps.
+% (\pdffontattr was introduced many years ago, but people still run
+% older pdftex's; it's easy to conditionalize, so we do.)
+\ifpdf \ifx\pdffontattr\thisisundefined \else
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1-0)
+%%Title: (TeX-OT1-0 TeX OT1 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<23> <26> <0023>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+40 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1IT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1IT-0)
+%%Title: (TeX-OT1IT-0 TeX OT1IT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1IT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1IT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<25> <26> <0025>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+42 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<23> <0023>
+<24> <00A3>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1IT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1TT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1TT-0)
+%%Title: (TeX-OT1TT-0 TeX OT1TT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1TT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1TT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+5 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<21> <26> <0021>
+<28> <5F> <0028>
+<61> <7E> <0061>
+endbfrange
+32 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <2191>
+<0C> <2193>
+<0D> <0027>
+<0E> <00A1>
+<0F> <00BF>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<20> <2423>
+<27> <2019>
+<60> <2018>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1TT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+\fi\fi
+
+
+% Set the font macro #1 to the font named \fontprefix#2.
+% #3 is the font's design size, #4 is a scale factor, #5 is the CMap
+% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit).
+% Example:
+% #1 = \textrm
+% #2 = \rmshape
+% #3 = 10
+% #4 = \mainmagstep
+% #5 = OT1
+%
+\def\setfont#1#2#3#4#5{%
+  \font#1=\fontprefix#2#3 scaled #4
+  \csname cmap#5\endcsname#1%
+}
+% This is what gets called when #5 of \setfont is empty.
+\let\cmap\gobble
+%
+% (end of cmaps)
+
+% Use cm as the default font prefix.
+% To specify the font prefix, you must define \fontprefix
+% before you read in texinfo.tex.
+\ifx\fontprefix\thisisundefined
+\def\fontprefix{cm}
+\fi
+% Support font families that don't use the same naming scheme as CM.
+\def\rmshape{r}
+\def\rmbshape{bx}               % where the normal face is bold
+\def\bfshape{b}
+\def\bxshape{bx}
+\def\ttshape{tt}
+\def\ttbshape{tt}
+\def\ttslshape{sltt}
+\def\itshape{ti}
+\def\itbshape{bxti}
+\def\slshape{sl}
+\def\slbshape{bxsl}
+\def\sfshape{ss}
+\def\sfbshape{ss}
+\def\scshape{csc}
+\def\scbshape{csc}
+
+% Definitions for a main text size of 11pt.  (The default in Texinfo.)
+%
+\def\definetextfontsizexi{%
+% Text fonts (11.2pt, magstep1).
+\def\textnominalsize{11pt}
+\edef\mainmagstep{\magstephalf}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1095}
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstep1}{OT1}
+\setfont\deftt\ttshape{10}{\magstep1}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+\def\smallecsize{0900}
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+\def\smallerecsize{0800}
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\titleecsize{2074}
+
+% Chapter (and unnumbered) fonts (17.28pt).
+\def\chapnominalsize{17pt}
+\setfont\chaprm\rmbshape{12}{\magstep2}{OT1}
+\setfont\chapit\itbshape{10}{\magstep3}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep3}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT}
+\setfont\chapsf\sfbshape{17}{1000}{OT1}
+\let\chapbf=\chaprm
+\setfont\chapsc\scbshape{10}{\magstep3}{OT1}
+\font\chapi=cmmi12 scaled \magstep2
+\font\chapsy=cmsy10 scaled \magstep3
+\def\chapecsize{1728}
+
+% Section fonts (14.4pt).
+\def\secnominalsize{14pt}
+\setfont\secrm\rmbshape{12}{\magstep1}{OT1}
+\setfont\secit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep2}{OT1}
+\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\secsf\sfbshape{12}{\magstep1}{OT1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep2}{OT1}
+\font\seci=cmmi12 scaled \magstep1
+\font\secsy=cmsy10 scaled \magstep2
+\def\sececsize{1440}
+
+% Subsection fonts (13.15pt).
+\def\ssecnominalsize{13pt}
+\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1}
+\setfont\ssecit\itbshape{10}{1315}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1315}{OT1}
+\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1315}{OT1}
+\font\sseci=cmmi12 scaled \magstephalf
+\font\ssecsy=cmsy10 scaled 1315
+\def\ssececsize{1200}
+
+% Reduced fonts for @acro in text (10pt).
+\def\reducednominalsize{10pt}
+\setfont\reducedrm\rmshape{10}{1000}{OT1}
+\setfont\reducedtt\ttshape{10}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{1000}{OT1}
+\setfont\reducedit\itshape{10}{1000}{OT1IT}
+\setfont\reducedsl\slshape{10}{1000}{OT1}
+\setfont\reducedsf\sfshape{10}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{1000}{OT1}
+\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT}
+\font\reducedi=cmmi10
+\font\reducedsy=cmsy10
+\def\reducedecsize{1000}
+
+\textleading = 13.2pt % line spacing for 11pt CM
+\textfonts            % reset the current fonts
+\rm
+} % end of 11pt text font size definitions, \definetextfontsizexi
+
+
+% Definitions to make the main text be 10pt Computer Modern, with
+% section, chapter, etc., sizes following suit.  This is for the GNU
+% Press printing of the Emacs 22 manual.  Maybe other manuals in the
+% future.  Used with @smallbook, which sets the leading to 12pt.
+%
+\def\definetextfontsizex{%
+% Text fonts (10pt).
+\def\textnominalsize{10pt}
+\edef\mainmagstep{1000}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1000}
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstephalf}{OT1}
+\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+\def\smallecsize{0900}
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+\def\smallerecsize{0800}
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\titleecsize{2074}
+
+% Chapter fonts (14.4pt).
+\def\chapnominalsize{14pt}
+\setfont\chaprm\rmbshape{12}{\magstep1}{OT1}
+\setfont\chapit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep2}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\chapsf\sfbshape{12}{\magstep1}{OT1}
+\let\chapbf\chaprm
+\setfont\chapsc\scbshape{10}{\magstep2}{OT1}
+\font\chapi=cmmi12 scaled \magstep1
+\font\chapsy=cmsy10 scaled \magstep2
+\def\chapecsize{1440}
+
+% Section fonts (12pt).
+\def\secnominalsize{12pt}
+\setfont\secrm\rmbshape{12}{1000}{OT1}
+\setfont\secit\itbshape{10}{\magstep1}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep1}{OT1}
+\setfont\sectt\ttbshape{12}{1000}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT}
+\setfont\secsf\sfbshape{12}{1000}{OT1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep1}{OT1}
+\font\seci=cmmi12
+\font\secsy=cmsy10 scaled \magstep1
+\def\sececsize{1200}
+
+% Subsection fonts (10pt).
+\def\ssecnominalsize{10pt}
+\setfont\ssecrm\rmbshape{10}{1000}{OT1}
+\setfont\ssecit\itbshape{10}{1000}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1000}{OT1}
+\setfont\ssectt\ttbshape{10}{1000}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT}
+\setfont\ssecsf\sfbshape{10}{1000}{OT1}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1000}{OT1}
+\font\sseci=cmmi10
+\font\ssecsy=cmsy10
+\def\ssececsize{1000}
+
+% Reduced fonts for @acro in text (9pt).
+\def\reducednominalsize{9pt}
+\setfont\reducedrm\rmshape{9}{1000}{OT1}
+\setfont\reducedtt\ttshape{9}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{900}{OT1}
+\setfont\reducedit\itshape{9}{1000}{OT1IT}
+\setfont\reducedsl\slshape{9}{1000}{OT1}
+\setfont\reducedsf\sfshape{9}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{900}{OT1}
+\setfont\reducedttsl\ttslshape{10}{900}{OT1TT}
+\font\reducedi=cmmi9
+\font\reducedsy=cmsy9
+\def\reducedecsize{0900}
+
+\divide\parskip by 2  % reduce space between paragraphs
+\textleading = 12pt   % line spacing for 10pt CM
+\textfonts            % reset the current fonts
+\rm
+} % end of 10pt text font size definitions, \definetextfontsizex
+
+
+% We provide the user-level command
+%   @fonttextsize 10
+% (or 11) to redefine the text font size.  pt is assumed.
+%
+\def\xiword{11}
+\def\xword{10}
+\def\xwordpt{10pt}
+%
+\parseargdef\fonttextsize{%
+  \def\textsizearg{#1}%
+  %\wlog{doing @fonttextsize \textsizearg}%
+  %
+  % Set \globaldefs so that documents can use this inside @tex, since
+  % makeinfo 4.8 does not support it, but we need it nonetheless.
+  %
+ \begingroup \globaldefs=1
+  \ifx\textsizearg\xword \definetextfontsizex
+  \else \ifx\textsizearg\xiword \definetextfontsizexi
+  \else
+    \errhelp=\EMsimple
+    \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'}
+  \fi\fi
+ \endgroup
+}
+
+
+% In order for the font changes to affect most math symbols and letters,
+% we have to define the \textfont of the standard families.  Since
+% texinfo doesn't allow for producing subscripts and superscripts except
+% in the main text, we don't bother to reset \scriptfont and
+% \scriptscriptfont (which would also require loading a lot more fonts).
+%
+\def\resetmathfonts{%
+  \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
+  \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
+  \textfont\ttfam=\tentt \textfont\sffam=\tensf
+}
+
+% The font-changing commands redefine the meanings of \tenSTYLE, instead
+% of just \STYLE.  We do this because \STYLE needs to also set the
+% current \fam for math mode.  Our \STYLE (e.g., \rm) commands hardwire
+% \tenSTYLE to set the current font.
+%
+% Each font-changing command also sets the names \lsize (one size lower)
+% and \lllsize (three sizes lower).  These relative commands are used in
+% the LaTeX logo and acronyms.
+%
+% This all needs generalizing, badly.
+%
+\def\textfonts{%
+  \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
+  \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
+  \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
+  \let\tenttsl=\textttsl
+  \def\curfontsize{text}%
+  \def\lsize{reduced}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{\textleading}}
+\def\titlefonts{%
+  \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
+  \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
+  \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
+  \let\tenttsl=\titlettsl
+  \def\curfontsize{title}%
+  \def\lsize{chap}\def\lllsize{subsec}%
+  \resetmathfonts \setleading{27pt}}
+\def\titlefont#1{{\titlefonts\rmisbold #1}}
+\def\chapfonts{%
+  \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
+  \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
+  \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
+  \let\tenttsl=\chapttsl
+  \def\curfontsize{chap}%
+  \def\lsize{sec}\def\lllsize{text}%
+  \resetmathfonts \setleading{19pt}}
+\def\secfonts{%
+  \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
+  \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
+  \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
+  \let\tenttsl=\secttsl
+  \def\curfontsize{sec}%
+  \def\lsize{subsec}\def\lllsize{reduced}%
+  \resetmathfonts \setleading{16pt}}
+\def\subsecfonts{%
+  \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
+  \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
+  \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
+  \let\tenttsl=\ssecttsl
+  \def\curfontsize{ssec}%
+  \def\lsize{text}\def\lllsize{small}%
+  \resetmathfonts \setleading{15pt}}
+\let\subsubsecfonts = \subsecfonts
+\def\reducedfonts{%
+  \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl
+  \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
+  \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
+  \let\tenttsl=\reducedttsl
+  \def\curfontsize{reduced}%
+  \def\lsize{small}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{10.5pt}}
+\def\smallfonts{%
+  \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
+  \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
+  \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
+  \let\tenttsl=\smallttsl
+  \def\curfontsize{small}%
+  \def\lsize{smaller}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{10.5pt}}
+\def\smallerfonts{%
+  \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
+  \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
+  \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
+  \let\tenttsl=\smallerttsl
+  \def\curfontsize{smaller}%
+  \def\lsize{smaller}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{9.5pt}}
+
+% Fonts for short table of contents.
+\setfont\shortcontrm\rmshape{12}{1000}{OT1}
+\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1}  % no cmb12
+\setfont\shortcontsl\slshape{12}{1000}{OT1}
+\setfont\shortconttt\ttshape{12}{1000}{OT1TT}
+
+% Define these just so they can be easily changed for other fonts.
+\def\angleleft{$\langle$}
+\def\angleright{$\rangle$}
+
+% Set the fonts to use with the @small... environments.
+\let\smallexamplefonts = \smallfonts
+
+% About \smallexamplefonts.  If we use \smallfonts (9pt), @smallexample
+% can fit this many characters:
+%   8.5x11=86   smallbook=72  a4=90  a5=69
+% If we use \scriptfonts (8pt), then we can fit this many characters:
+%   8.5x11=90+  smallbook=80  a4=90+  a5=77
+% For me, subjectively, the few extra characters that fit aren't worth
+% the additional smallness of 8pt.  So I'm making the default 9pt.
+%
+% By the way, for comparison, here's what fits with @example (10pt):
+%   8.5x11=71  smallbook=60  a4=75  a5=58
+% --karl, 24jan03.
+
+% Set up the default fonts, so we can use them for creating boxes.
+%
+\definetextfontsizexi
+
+
+\message{markup,}
+
+% Check if we are currently using a typewriter font.  Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
+
+% Markup style infrastructure.  \defmarkupstylesetup\INITMACRO will
+% define and register \INITMACRO to be called on markup style changes.
+% \INITMACRO can check \currentmarkupstyle for the innermost
+% style and the set of \ifmarkupSTYLE switches for all styles
+% currently in effect.
+\newif\ifmarkupvar
+\newif\ifmarkupsamp
+\newif\ifmarkupkey
+%\newif\ifmarkupfile % @file == @samp.
+%\newif\ifmarkupoption % @option == @samp.
+\newif\ifmarkupcode
+\newif\ifmarkupkbd
+%\newif\ifmarkupenv % @env == @code.
+%\newif\ifmarkupcommand % @command == @code.
+\newif\ifmarkuptex % @tex (and part of @math, for now).
+\newif\ifmarkupexample
+\newif\ifmarkupverb
+\newif\ifmarkupverbatim
+
+\let\currentmarkupstyle\empty
+
+\def\setupmarkupstyle#1{%
+  \csname markup#1true\endcsname
+  \def\currentmarkupstyle{#1}%
+  \markupstylesetup
+}
+
+\let\markupstylesetup\empty
+
+\def\defmarkupstylesetup#1{%
+  \expandafter\def\expandafter\markupstylesetup
+    \expandafter{\markupstylesetup #1}%
+  \def#1%
+}
+
+% Markup style setup for left and right quotes.
+\defmarkupstylesetup\markupsetuplq{%
+  \expandafter\let\expandafter \temp
+    \csname markupsetuplq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuplqdefault \else \temp \fi
+}
+
+\defmarkupstylesetup\markupsetuprq{%
+  \expandafter\let\expandafter \temp
+    \csname markupsetuprq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuprqdefault \else \temp \fi
+}
+
+{
+\catcode`\'=\active
+\catcode`\`=\active
+
+\gdef\markupsetuplqdefault{\let`\lq}
+\gdef\markupsetuprqdefault{\let'\rq}
+
+\gdef\markupsetcodequoteleft{\let`\codequoteleft}
+\gdef\markupsetcodequoteright{\let'\codequoteright}
+}
+
+\let\markupsetuplqcode \markupsetcodequoteleft
+\let\markupsetuprqcode \markupsetcodequoteright
+%
+\let\markupsetuplqexample \markupsetcodequoteleft
+\let\markupsetuprqexample \markupsetcodequoteright
+%
+\let\markupsetuplqkbd     \markupsetcodequoteleft
+\let\markupsetuprqkbd     \markupsetcodequoteright
+%
+\let\markupsetuplqsamp \markupsetcodequoteleft
+\let\markupsetuprqsamp \markupsetcodequoteright
+%
+\let\markupsetuplqverb \markupsetcodequoteleft
+\let\markupsetuprqverb \markupsetcodequoteright
+%
+\let\markupsetuplqverbatim \markupsetcodequoteleft
+\let\markupsetuprqverbatim \markupsetcodequoteright
+
+% Allow an option to not use regular directed right quote/apostrophe
+% (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
+% The undirected quote is ugly, so don't make it the default, but it
+% works for pasting with more pdf viewers (at least evince), the
+% lilypond developers report.  xpdf does work with the regular 0x27.
+%
+\def\codequoteright{%
+  \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax
+    \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
+      '%
+    \else \char'15 \fi
+  \else \char'15 \fi
+}
+%
+% and a similar option for the left quote char vs. a grave accent.
+% Modern fonts display ASCII 0x60 as a grave accent, so some people like
+% the code environments to do likewise.
+%
+\def\codequoteleft{%
+  \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax
+    \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
+      % [Knuth] pp. 380,381,391
+      % \relax disables Spanish ligatures ?` and !` of \tt font.
+      \relax`%
+    \else \char'22 \fi
+  \else \char'22 \fi
+}
+
+% Commands to set the quote options.
+% 
+\parseargdef\codequoteundirected{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}%
+  \fi\fi
+}
+%
+\parseargdef\codequotebacktick{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}%
+  \fi\fi
+}
+
+% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font.
+\def\noligaturesquoteleft{\relax\lq}
+
+% Count depth in font-changes, for error checks
+\newcount\fontdepth \fontdepth=0
+
+% Font commands.
+
+% #1 is the font command (\sl or \it), #2 is the text to slant.
+% If we are in a monospaced environment, however, 1) always use \ttsl,
+% and 2) do not add an italic correction.
+\def\dosmartslant#1#2{%
+  \ifusingtt 
+    {{\ttsl #2}\let\next=\relax}%
+    {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}%
+  \next
+}
+\def\smartslanted{\dosmartslant\sl}
+\def\smartitalic{\dosmartslant\it}
+
+% Output an italic correction unless \next (presumed to be the following
+% character) is such as not to need one.
+\def\smartitaliccorrection{%
+  \ifx\next,%
+  \else\ifx\next-%
+  \else\ifx\next.%
+  \else\ptexslash
+  \fi\fi\fi
+  \aftersmartic
+}
+
+% Unconditional use \ttsl, and no ic.  @var is set to this for defuns.
+\def\ttslanted#1{{\ttsl #1}}
+
+% @cite is like \smartslanted except unconditionally use \sl.  We never want
+% ttsl for book titles, do we?
+\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection}
+
+\def\aftersmartic{}
+\def\var#1{%
+  \let\saveaftersmartic = \aftersmartic
+  \def\aftersmartic{\null\let\aftersmartic=\saveaftersmartic}%
+  \smartslanted{#1}%
+}
+
+\let\i=\smartitalic
+\let\slanted=\smartslanted
+\let\dfn=\smartslanted
+\let\emph=\smartitalic
+
+% Explicit font changes: @r, @sc, undocumented @ii.
+\def\r#1{{\rm #1}}              % roman font
+\def\sc#1{{\smallcaps#1}}       % smallcaps font
+\def\ii#1{{\it #1}}             % italic font
+
+% @b, explicit bold.  Also @strong.
+\def\b#1{{\bf #1}}
+\let\strong=\b
+
+% @sansserif, explicit sans.
+\def\sansserif#1{{\sf #1}}
+
+% We can't just use \exhyphenpenalty, because that only has effect at
+% the end of a paragraph.  Restore normal hyphenation at the end of the
+% group within which \nohyphenation is presumably called.
+%
+\def\nohyphenation{\hyphenchar\font = -1  \aftergroup\restorehyphenation}
+\def\restorehyphenation{\hyphenchar\font = `- }
+
+% Set sfcode to normal for the chars that usually have another value.
+% Can't use plain's \frenchspacing because it uses the `\x notation, and
+% sometimes \x has an active definition that messes things up.
+%
+\catcode`@=11
+  \def\plainfrenchspacing{%
+    \sfcode\dotChar  =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
+    \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
+    \def\endofsentencespacefactor{1000}% for @. and friends
+  }
+  \def\plainnonfrenchspacing{%
+    \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
+    \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
+    \def\endofsentencespacefactor{3000}% for @. and friends
+  }
+\catcode`@=\other
+\def\endofsentencespacefactor{3000}% default
+
+% @t, explicit typewriter.
+\def\t#1{%
+  {\tt \rawbackslash \plainfrenchspacing #1}%
+  \null
+}
+
+% @samp.
+\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
+
+% @indicateurl is \samp, that is, with quotes.
+\let\indicateurl=\samp
+
+% @code (and similar) prints in typewriter, but with spaces the same
+% size as normal in the surrounding text, without hyphenation, etc.
+% This is a subroutine for that.
+\def\tclose#1{%
+  {%
+    % Change normal interword space to be same as for the current font.
+    \spaceskip = \fontdimen2\font
+    %
+    % Switch to typewriter.
+    \tt
+    %
+    % But `\ ' produces the large typewriter interword space.
+    \def\ {{\spaceskip = 0pt{} }}%
+    %
+    % Turn off hyphenation.
+    \nohyphenation
+    %
+    \rawbackslash
+    \plainfrenchspacing
+    #1%
+  }%
+  \null % reset spacefactor to 1000
+}
+
+% We *must* turn on hyphenation at `-' and `_' in @code.
+% Otherwise, it is too hard to avoid overfull hboxes
+% in the Emacs manual, the Library manual, etc.
+%
+% Unfortunately, TeX uses one parameter (\hyphenchar) to control
+% both hyphenation at - and hyphenation within words.
+% We must therefore turn them both off (\tclose does that)
+% and arrange explicitly to hyphenate at a dash.
+%  -- rms.
+{
+  \catcode`\-=\active \catcode`\_=\active
+  \catcode`\'=\active \catcode`\`=\active
+  \global\let'=\rq \global\let`=\lq  % default definitions
+  %
+  \global\def\code{\begingroup
+    \setupmarkupstyle{code}%
+    % The following should really be moved into \setupmarkupstyle handlers.
+    \catcode\dashChar=\active  \catcode\underChar=\active
+    \ifallowcodebreaks
+     \let-\codedash
+     \let_\codeunder
+    \else
+     \let-\normaldash
+     \let_\realunder
+    \fi
+    \codex
+  }
+}
+
+\def\codex #1{\tclose{#1}\endgroup}
+
+\def\normaldash{-}
+\def\codedash{-\discretionary{}{}{}}
+\def\codeunder{%
+  % this is all so @math{@code{var_name}+1} can work.  In math mode, _
+  % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
+  % will therefore expand the active definition of _, which is us
+  % (inside @code that is), therefore an endless loop.
+  \ifusingtt{\ifmmode
+               \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
+             \else\normalunderscore \fi
+             \discretionary{}{}{}}%
+            {\_}%
+}
+
+% An additional complication: the above will allow breaks after, e.g.,
+% each of the four underscores in __typeof__.  This is bad.
+% @allowcodebreaks provides a document-level way to turn breaking at -
+% and _ on and off.
+%
+\newif\ifallowcodebreaks  \allowcodebreakstrue
+
+\def\keywordtrue{true}
+\def\keywordfalse{false}
+
+\parseargdef\allowcodebreaks{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\keywordtrue
+    \allowcodebreakstrue
+  \else\ifx\txiarg\keywordfalse
+    \allowcodebreaksfalse
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}%
+  \fi\fi
+}
+
+% For @command, @env, @file, @option quotes seem unnecessary,
+% so use \code rather than \samp.
+\let\command=\code
+\let\env=\code
+\let\file=\code
+\let\option=\code
+
+% @uref (abbreviation for `urlref') takes an optional (comma-separated)
+% second argument specifying the text to display and an optional third
+% arg as text to display instead of (rather than in addition to) the url
+% itself.  First (mandatory) arg is the url.
+% (This \urefnobreak definition isn't used now, leaving it for a while
+% for comparison.)
+\def\urefnobreak#1{\dourefnobreak #1,,,\finish}
+\def\dourefnobreak#1,#2,#3,#4\finish{\begingroup
+  \unsepspaces
+  \pdfurl{#1}%
+  \setbox0 = \hbox{\ignorespaces #3}%
+  \ifdim\wd0 > 0pt
+    \unhbox0 % third arg given, show only that
+  \else
+    \setbox0 = \hbox{\ignorespaces #2}%
+    \ifdim\wd0 > 0pt
+      \ifpdf
+        \unhbox0             % PDF: 2nd arg given, show only it
+      \else
+        \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
+      \fi
+    \else
+      \code{#1}% only url given, so show it
+    \fi
+  \fi
+  \endlink
+\endgroup}
+
+% This \urefbreak definition is the active one.
+\def\urefbreak{\begingroup \urefcatcodes \dourefbreak}
+\let\uref=\urefbreak
+\def\dourefbreak#1{\urefbreakfinish #1,,,\finish}
+\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example
+  \unsepspaces
+  \pdfurl{#1}%
+  \setbox0 = \hbox{\ignorespaces #3}%
+  \ifdim\wd0 > 0pt
+    \unhbox0 % third arg given, show only that
+  \else
+    \setbox0 = \hbox{\ignorespaces #2}%
+    \ifdim\wd0 > 0pt
+      \ifpdf
+        \unhbox0             % PDF: 2nd arg given, show only it
+      \else
+        \unhbox0\ (\urefcode{#1})% DVI: 2nd arg given, show both it and url
+      \fi
+    \else
+      \urefcode{#1}% only url given, so show it
+    \fi
+  \fi
+  \endlink
+\endgroup}
+
+% Allow line breaks around only a few characters (only).
+\def\urefcatcodes{%
+  \catcode\ampChar=\active   \catcode\dotChar=\active
+  \catcode\hashChar=\active  \catcode\questChar=\active
+  \catcode\slashChar=\active
+}
+{
+  \urefcatcodes
+  %
+  \global\def\urefcode{\begingroup
+    \setupmarkupstyle{code}%
+    \urefcatcodes
+    \let&\urefcodeamp
+    \let.\urefcodedot
+    \let#\urefcodehash
+    \let?\urefcodequest
+    \let/\urefcodeslash
+    \codex
+  }
+  %
+  % By default, they are just regular characters.
+  \global\def&{\normalamp}
+  \global\def.{\normaldot}
+  \global\def#{\normalhash}
+  \global\def?{\normalquest}
+  \global\def/{\normalslash}
+}
+
+% we put a little stretch before and after the breakable chars, to help
+% line breaking of long url's.  The unequal skips make look better in
+% cmtt at least, especially for dots.
+\def\urefprestretch{\urefprebreak \hskip0pt plus.13em }
+\def\urefpoststretch{\urefpostbreak \hskip0pt plus.1em }
+%
+\def\urefcodeamp{\urefprestretch \&\urefpoststretch}
+\def\urefcodedot{\urefprestretch .\urefpoststretch}
+\def\urefcodehash{\urefprestretch \#\urefpoststretch}
+\def\urefcodequest{\urefprestretch ?\urefpoststretch}
+\def\urefcodeslash{\futurelet\next\urefcodeslashfinish}
+{
+  \catcode`\/=\active
+  \global\def\urefcodeslashfinish{%
+    \urefprestretch \slashChar
+    % Allow line break only after the final / in a sequence of
+    % slashes, to avoid line break between the slashes in http://.
+    \ifx\next/\else \urefpoststretch \fi
+  }
+}
+
+% One more complication: by default we'll break after the special
+% characters, but some people like to break before the special chars, so
+% allow that.  Also allow no breaking at all, for manual control.
+% 
+\parseargdef\urefbreakstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\wordnone
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordbefore
+    \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordafter
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak}
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @urefbreakstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\wordafter{after}
+\def\wordbefore{before}
+\def\wordnone{none}
+
+\urefbreakstyle after
+
+% @url synonym for @uref, since that's how everyone uses it.
+%
+\let\url=\uref
+
+% rms does not like angle brackets --karl, 17may97.
+% So now @email is just like @uref, unless we are pdf.
+%
+%\def\email#1{\angleleft{\tt #1}\angleright}
+\ifpdf
+  \def\email#1{\doemail#1,,\finish}
+  \def\doemail#1,#2,#3\finish{\begingroup
+    \unsepspaces
+    \pdfurl{mailto:#1}%
+    \setbox0 = \hbox{\ignorespaces #2}%
+    \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
+    \endlink
+  \endgroup}
+\else
+  \let\email=\uref
+\fi
+
+% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
+%   `example' (@kbd uses ttsl only inside of @example and friends),
+%   or `code' (@kbd uses normal tty font always).
+\parseargdef\kbdinputstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\worddistinct
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
+  \else\ifx\txiarg\wordexample
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
+  \else\ifx\txiarg\wordcode
+    \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @kbdinputstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\worddistinct{distinct}
+\def\wordexample{example}
+\def\wordcode{code}
+
+% Default is `distinct'.
+\kbdinputstyle distinct
+
+% @kbd is like @code, except that if the argument is just one @key command,
+% then @kbd has no effect.
+\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}}
+
+\def\xkey{\key}
+\def\kbdsub#1#2#3\par{%
+  \def\one{#1}\def\three{#3}\def\threex{??}%
+  \ifx\one\xkey\ifx\threex\three \key{#2}%
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+}
+
+% definition of @key that produces a lozenge.  Doesn't adjust to text size.
+%\setfont\keyrm\rmshape{8}{1000}{OT1}
+%\font\keysy=cmsy9
+%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+%  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+%    \vbox{\hrule\kern-0.4pt
+%     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+%    \kern-0.4pt\hrule}%
+%  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+
+% definition of @key with no lozenge.  If the current font is already
+% monospace, don't change it; that way, we respect @kbdinputstyle.  But
+% if it isn't monospace, then use \tt.
+%
+\def\key#1{{\setupmarkupstyle{key}%
+  \nohyphenation
+  \ifmonospace\else\tt\fi
+  #1}\null}
+
+% @clicksequence{File @click{} Open ...}
+\def\clicksequence#1{\begingroup #1\endgroup}
+
+% @clickstyle @arrow   (by default)
+\parseargdef\clickstyle{\def\click{#1}}
+\def\click{\arrow}
+
+% Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
+% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
+%
+\def\dmn#1{\thinspace #1}
+
+% @l was never documented to mean ``switch to the Lisp font'',
+% and it is not used as such in any manual I can find.  We need it for
+% Polish suppressed-l.  --karl, 22sep96.
+%\def\l#1{{\li #1}\null}
+
+% @acronym for "FBI", "NATO", and the like.
+% We print this one point size smaller, since it's intended for
+% all-uppercase.
+%
+\def\acronym#1{\doacronym #1,,\finish}
+\def\doacronym#1,#2,#3\finish{%
+  {\selectfonts\lsize #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+  \null % reset \spacefactor=1000
+}
+
+% @abbr for "Comput. J." and the like.
+% No font change, but don't do end-of-sentence spacing.
+%
+\def\abbr#1{\doabbr #1,,\finish}
+\def\doabbr#1,#2,#3\finish{%
+  {\plainfrenchspacing #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+  \null % reset \spacefactor=1000
+}
+
+% @asis just yields its argument.  Used with @table, for example.
+%
+\def\asis#1{#1}
+
+% @math outputs its argument in math mode.
+%
+% One complication: _ usually means subscripts, but it could also mean
+% an actual _ character, as in @math{@var{some_variable} + 1}.  So make
+% _ active, and distinguish by seeing if the current family is \slfam,
+% which is what @var uses.
+{
+  \catcode`\_ = \active
+  \gdef\mathunderscore{%
+    \catcode`\_=\active
+    \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+  }
+}
+% Another complication: we want \\ (and @\) to output a math (or tt) \.
+% FYI, plain.tex uses \\ as a temporary control sequence (for no
+% particular reason), but this is not advertised and we don't care.
+%
+% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
+\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
+%
+\def\math{%
+  \tex
+  \mathunderscore
+  \let\\ = \mathbackslash
+  \mathactive
+  % make the texinfo accent commands work in math mode
+  \let\"=\ddot
+  \let\'=\acute
+  \let\==\bar
+  \let\^=\hat
+  \let\`=\grave
+  \let\u=\breve
+  \let\v=\check
+  \let\~=\tilde
+  \let\dotaccent=\dot
+  $\finishmath
+}
+\def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
+
+% Some active characters (such as <) are spaced differently in math.
+% We have to reset their definitions in case the @math was an argument
+% to a command which sets the catcodes (such as @item or @section).
+%
+{
+  \catcode`^ = \active
+  \catcode`< = \active
+  \catcode`> = \active
+  \catcode`+ = \active
+  \catcode`' = \active
+  \gdef\mathactive{%
+    \let^ = \ptexhat
+    \let< = \ptexless
+    \let> = \ptexgtr
+    \let+ = \ptexplus
+    \let' = \ptexquoteright
+  }
+}
+
+% ctrl is no longer a Texinfo command, but leave this definition for fun.
+\def\ctrl #1{{\tt \rawbackslash \hat}#1}
+
+% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
+% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
+% except specified as a normal braced arg, so no newlines to worry about.
+% 
+\def\outfmtnametex{tex}
+%
+\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
+\long\def\doinlinefmt#1,#2,\finish{%
+  \def\inlinefmtname{#1}%
+  \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
+}
+% For raw, must switch into @tex before parsing the argument, to avoid
+% setting catcodes prematurely.  Doing it this way means that, for
+% example, @inlineraw{html, foo{bar} gets a parse error instead of being
+% ignored.  But this isn't important because if people want a literal
+% *right* brace they would have to use a command anyway, so they may as
+% well use a command to get a left brace too.  We could re-use the
+% delimiter character idea from \verb, but it seems like overkill.
+% 
+\long\def\inlineraw{\tex \doinlineraw}
+\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
+\def\doinlinerawtwo#1,#2,\finish{%
+  \def\inlinerawname{#1}%
+  \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi
+  \endgroup % close group opened by \tex.
+}
+
+
+\message{glyphs,}
+% and logos.
+
+% @@ prints an @, as does @atchar{}.
+\def\@{\char64 }
+\let\atchar=\@
+
+% @{ @} @lbracechar{} @rbracechar{} all generate brace characters.
+% Unless we're in typewriter, use \ecfont because the CM text fonts do
+% not have braces, and we don't want to switch into math.
+\def\mylbrace{{\ifmonospace\else\ecfont\fi \char123}}
+\def\myrbrace{{\ifmonospace\else\ecfont\fi \char125}}
+\let\{=\mylbrace \let\lbracechar=\{
+\let\}=\myrbrace \let\rbracechar=\}
+\begingroup
+  % Definitions to produce \{ and \} commands for indices,
+  % and @{ and @} for the aux/toc files.
+  \catcode`\{ = \other \catcode`\} = \other
+  \catcode`\[ = 1 \catcode`\] = 2
+  \catcode`\! = 0 \catcode`\\ = \other
+  !gdef!lbracecmd[\{]%
+  !gdef!rbracecmd[\}]%
+  !gdef!lbraceatcmd[@{]%
+  !gdef!rbraceatcmd[@}]%
+!endgroup
+
+% @comma{} to avoid , parsing problems.
+\let\comma = ,
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
+\let\, = \ptexc
+\let\dotaccent = \ptexdot
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \ptext
+\let\ubaraccent = \ptexb
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown @ordf @ordm
+% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
+\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+  \def\temp{#1}%
+  \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi
+  \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi
+  \else \errmessage{@dotless can be used only with i or j}%
+  \fi\fi
+}
+
+% The \TeX{} logo, as in plain, but resetting the spacing so that a
+% period following counts as ending a sentence.  (Idea found in latex.)
+%
+\edef\TeX{\TeX \spacefactor=1000 }
+
+% @LaTeX{} logo.  Not quite the same results as the definition in
+% latex.ltx, since we use a different font for the raised A; it's most
+% convenient for us to use an explicitly smaller font, rather than using
+% the \scriptstyle font (since we don't reset \scriptstyle and
+% \scriptscriptstyle).
+%
+\def\LaTeX{%
+  L\kern-.36em
+  {\setbox0=\hbox{T}%
+   \vbox to \ht0{\hbox{%
+     \ifx\textnominalsize\xwordpt
+       % for 10pt running text, \lllsize (8pt) is too small for the A in LaTeX.
+       % Revert to plain's \scriptsize, which is 7pt.
+       \count255=\the\fam $\fam\count255 \scriptstyle A$%
+     \else
+       % For 11pt, we can use our lllsize.
+       \selectfonts\lllsize A%
+     \fi
+     }%
+     \vss
+  }}%
+  \kern-.15em
+  \TeX
+}
+
+% Some math mode symbols.
+\def\bullet{$\ptexbullet$}
+\def\geq{\ifmmode \ge\else $\ge$\fi}
+\def\leq{\ifmmode \le\else $\le$\fi}
+\def\minus{\ifmmode -\else $-$\fi}
+
+% @dots{} outputs an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in the cm
+% typewriter fonts as three actual period characters; on the other hand,
+% in other typewriter fonts three periods are wider than 1.5em.  So do
+% whichever is larger.
+%
+\def\dots{%
+  \leavevmode
+  \setbox0=\hbox{...}% get width of three periods
+  \ifdim\wd0 > 1.5em
+    \dimen0 = \wd0
+  \else
+    \dimen0 = 1.5em
+  \fi
+  \hbox to \dimen0{%
+    \hskip 0pt plus.25fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus.5fil
+  }%
+}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+  \dots
+  \spacefactor=\endofsentencespacefactor
+}
+
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
+%
+% Since these characters are used in examples, they should be an even number of
+% \tt widths. Each \tt character is 1en, so two makes it 1em.
+%
+\def\point{$\star$}
+\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}}
+\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
+\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}}
+\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
+\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}}
+
+% The @error{} command.
+% Adapted from the TeXbook's \boxit.
+%
+\newbox\errorbox
+%
+{\tentt \global\dimen0 = 3em}% Width of the box.
+\dimen2 = .55pt % Thickness of rules
+% The text. (`r' is open on the right, `e' somewhat less so on the left.)
+\setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt}
+%
+\setbox\errorbox=\hbox to \dimen0{\hfil
+   \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
+   \advance\hsize by -2\dimen2 % Rules.
+   \vbox{%
+      \hrule height\dimen2
+      \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
+         \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
+         \kern3pt\vrule width\dimen2}% Space to right.
+      \hrule height\dimen2}
+    \hfil}
+%
+\def\error{\leavevmode\lower.7ex\copy\errorbox}
+
+% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
+%
+\def\pounds{{\it\$}}
+
+% @euro{} comes from a separate font, depending on the current style.
+% We use the free feym* fonts from the eurosym package by Henrik
+% Theiling, which support regular, slanted, bold and bold slanted (and
+% "outlined" (blackboard board, sort of) versions, which we don't need).
+% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
+%
+% Although only regular is the truly official Euro symbol, we ignore
+% that.  The Euro is designed to be slightly taller than the regular
+% font height.
+%
+% feymr - regular
+% feymo - slanted
+% feybr - bold
+% feybo - bold slanted
+%
+% There is no good (free) typewriter version, to my knowledge.
+% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
+% Hmm.
+%
+% Also doesn't work in math.  Do we need to do math with euro symbols?
+% Hope not.
+%
+%
+\def\euro{{\eurofont e}}
+\def\eurofont{%
+  % We set the font at each command, rather than predefining it in
+  % \textfonts and the other font-switching commands, so that
+  % installations which never need the symbol don't have to have the
+  % font installed.
+  %
+  % There is only one designed size (nominal 10pt), so we always scale
+  % that to the current nominal size.
+  %
+  % By the way, simply using "at 1em" works for cmr10 and the like, but
+  % does not work for cmbx10 and other extended/shrunken fonts.
+  %
+  \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
+  %
+  \ifx\curfontstyle\bfstylename
+    % bold:
+    \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
+  \else
+    % regular:
+    \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
+  \fi
+  \thiseurofont
+}
+
+% Glyphs from the EC fonts.  We don't use \let for the aliases, because
+% sometimes we redefine the original macro, and the alias should reflect
+% the redefinition.
+%
+% Use LaTeX names for the Icelandic letters.
+\def\DH{{\ecfont \char"D0}} % Eth
+\def\dh{{\ecfont \char"F0}} % eth
+\def\TH{{\ecfont \char"DE}} % Thorn
+\def\th{{\ecfont \char"FE}} % thorn
+%
+\def\guillemetleft{{\ecfont \char"13}}
+\def\guillemotleft{\guillemetleft}
+\def\guillemetright{{\ecfont \char"14}}
+\def\guillemotright{\guillemetright}
+\def\guilsinglleft{{\ecfont \char"0E}}
+\def\guilsinglright{{\ecfont \char"0F}}
+\def\quotedblbase{{\ecfont \char"12}}
+\def\quotesinglbase{{\ecfont \char"0D}}
+%
+% This positioning is not perfect (see the ogonek LaTeX package), but
+% we have the precomposed glyphs for the most common cases.  We put the
+% tests to use those glyphs in the single \ogonek macro so we have fewer
+% dummy definitions to worry about for index entries, etc.
+%
+% ogonek is also used with other letters in Lithuanian (IOU), but using
+% the precomposed glyphs for those is not so easy since they aren't in
+% the same EC font.
+\def\ogonek#1{{%
+  \def\temp{#1}%
+  \ifx\temp\macrocharA\Aogonek
+  \else\ifx\temp\macrochara\aogonek
+  \else\ifx\temp\macrocharE\Eogonek
+  \else\ifx\temp\macrochare\eogonek
+  \else
+    \ecfont \setbox0=\hbox{#1}%
+    \ifdim\ht0=1ex\accent"0C #1%
+    \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}%
+    \fi
+  \fi\fi\fi\fi
+  }%
+}
+\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A}
+\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a}
+\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E}
+\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e}
+%
+% Use the ec* fonts (cm-super in outline format) for non-CM glyphs.
+\def\ecfont{%
+  % We can't distinguish serif/sans and italic/slanted, but this
+  % is used for crude hacks anyway (like adding French and German
+  % quotes to documents typeset with CM, where we lose kerning), so
+  % hopefully nobody will notice/care.
+  \edef\ecsize{\csname\curfontsize ecsize\endcsname}%
+  \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
+  \ifmonospace
+    % typewriter:
+    \font\thisecfont = ectt\ecsize \space at \nominalsize
+  \else
+    \ifx\curfontstyle\bfstylename
+      % bold:
+      \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
+    \else
+      % regular:
+      \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+    \fi
+  \fi
+  \thisecfont
+}
+
+% @registeredsymbol - R in a circle.  The font for the R should really
+% be smaller yet, but lllsize is the best we can do for now.
+% Adapted from the plain.tex definition of \copyright.
+%
+\def\registeredsymbol{%
+  $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}%
+               \hfil\crcr\Orb}}%
+    }$%
+}
+
+% @textdegree - the normal degrees sign.
+%
+\def\textdegree{$^\circ$}
+
+% Laurent Siebenmann reports \Orb undefined with:
+%  Textures 1.7.7 (preloaded format=plain 93.10.14)  (68K)  16 APR 2004 02:38
+% so we'll define it if necessary.
+%
+\ifx\Orb\thisisundefined
+\def\Orb{\mathhexbox20D}
+\fi
+
+% Quotes.
+\chardef\quotedblleft="5C
+\chardef\quotedblright=`\"
+\chardef\quoteleft=`\`
+\chardef\quoteright=`\'
+
+
+\message{page headings,}
+
+\newskip\titlepagetopglue \titlepagetopglue = 1.5in
+\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
+
+% First the title page.  Must do @settitle before @titlepage.
+\newif\ifseenauthor
+\newif\iffinishedtitlepage
+
+% Do an implicit @contents or @shortcontents after @end titlepage if the
+% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
+%
+\newif\ifsetcontentsaftertitlepage
+ \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
+\newif\ifsetshortcontentsaftertitlepage
+ \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
+
+\parseargdef\shorttitlepage{%
+  \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+  \endgroup\page\hbox{}\page}
+
+\envdef\titlepage{%
+  % Open one extra group, as we want to close it in the middle of \Etitlepage.
+  \begingroup
+    \parindent=0pt \textfonts
+    % Leave some space at the very top of the page.
+    \vglue\titlepagetopglue
+    % No rule at page bottom unless we print one at the top with @title.
+    \finishedtitlepagetrue
+    %
+    % Most title ``pages'' are actually two pages long, with space
+    % at the top of the second.  We don't want the ragged left on the second.
+    \let\oldpage = \page
+    \def\page{%
+      \iffinishedtitlepage\else
+	 \finishtitlepage
+      \fi
+      \let\page = \oldpage
+      \page
+      \null
+    }%
+}
+
+\def\Etitlepage{%
+    \iffinishedtitlepage\else
+	\finishtitlepage
+    \fi
+    % It is important to do the page break before ending the group,
+    % because the headline and footline are only empty inside the group.
+    % If we use the new definition of \page, we always get a blank page
+    % after the title page, which we certainly don't want.
+    \oldpage
+  \endgroup
+  %
+  % Need this before the \...aftertitlepage checks so that if they are
+  % in effect the toc pages will come out with page numbers.
+  \HEADINGSon
+  %
+  % If they want short, they certainly want long too.
+  \ifsetshortcontentsaftertitlepage
+    \shortcontents
+    \contents
+    \global\let\shortcontents = \relax
+    \global\let\contents = \relax
+  \fi
+  %
+  \ifsetcontentsaftertitlepage
+    \contents
+    \global\let\contents = \relax
+    \global\let\shortcontents = \relax
+  \fi
+}
+
+\def\finishtitlepage{%
+  \vskip4pt \hrule height 2pt width \hsize
+  \vskip\titlepagebottomglue
+  \finishedtitlepagetrue
+}
+
+% Settings used for typesetting titles: no hyphenation, no indentation,
+% don't worry much about spacing, ragged right.  This should be used
+% inside a \vbox, and fonts need to be set appropriately first.  Because
+% it is always used for titles, nothing else, we call \rmisbold.  \par
+% should be specified before the end of the \vbox, since a vbox is a group.
+% 
+\def\raggedtitlesettings{%
+  \rmisbold
+  \hyphenpenalty=10000
+  \parindent=0pt
+  \tolerance=5000
+  \ptexraggedright
+}
+
+% Macros to be used within @titlepage:
+
+\let\subtitlerm=\tenrm
+\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
+
+\parseargdef\title{%
+  \checkenv\titlepage
+  \vbox{\titlefonts \raggedtitlesettings #1\par}%
+  % print a rule at the page bottom also.
+  \finishedtitlepagefalse
+  \vskip4pt \hrule height 4pt width \hsize \vskip4pt
+}
+
+\parseargdef\subtitle{%
+  \checkenv\titlepage
+  {\subtitlefont \rightline{#1}}%
+}
+
+% @author should come last, but may come many times.
+% It can also be used inside @quotation.
+%
+\parseargdef\author{%
+  \def\temp{\quotation}%
+  \ifx\thisenv\temp
+    \def\quotationauthor{#1}% printed in \Equotation.
+  \else
+    \checkenv\titlepage
+    \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
+    {\secfonts\rmisbold \leftline{#1}}%
+  \fi
+}
+
+
+% Set up page headings and footings.
+
+\let\thispage=\folio
+
+\newtoks\evenheadline    % headline on even pages
+\newtoks\oddheadline     % headline on odd pages
+\newtoks\evenfootline    % footline on even pages
+\newtoks\oddfootline     % footline on odd pages
+
+% Now make TeX use those variables
+\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
+                            \else \the\evenheadline \fi}}
+\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
+                            \else \the\evenfootline \fi}\HEADINGShook}
+\let\HEADINGShook=\relax
+
+% Commands to set those variables.
+% For example, this is what  @headings on  does
+% @evenheading @thistitle|@thispage|@thischapter
+% @oddheading @thischapter|@thispage|@thistitle
+% @evenfooting @thisfile||
+% @oddfooting ||@thisfile
+
+
+\def\evenheading{\parsearg\evenheadingxxx}
+\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
+\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddheading{\parsearg\oddheadingxxx}
+\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
+\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
+
+\def\evenfooting{\parsearg\evenfootingxxx}
+\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
+\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddfooting{\parsearg\oddfootingxxx}
+\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
+\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
+  \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
+  %
+  % Leave some space for the footline.  Hopefully ok to assume
+  % @evenfooting will not be used by itself.
+  \global\advance\pageheight by -12pt
+  \global\advance\vsize by -12pt
+}
+
+\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
+
+% @evenheadingmarks top     \thischapter <- chapter at the top of a page
+% @evenheadingmarks bottom  \thischapter <- chapter at the bottom of a page
+%
+% The same set of arguments for:
+%
+% @oddheadingmarks
+% @evenfootingmarks
+% @oddfootingmarks
+% @everyheadingmarks
+% @everyfootingmarks
+
+\def\evenheadingmarks{\headingmarks{even}{heading}}
+\def\oddheadingmarks{\headingmarks{odd}{heading}}
+\def\evenfootingmarks{\headingmarks{even}{footing}}
+\def\oddfootingmarks{\headingmarks{odd}{footing}}
+\def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1}
+                          \headingmarks{odd}{heading}{#1} }
+\def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1}
+                          \headingmarks{odd}{footing}{#1} }
+% #1 = even/odd, #2 = heading/footing, #3 = top/bottom.
+\def\headingmarks#1#2#3 {%
+  \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname
+  \global\expandafter\let\csname get#1#2marks\endcsname \temp
+}
+
+\everyheadingmarks bottom
+\everyfootingmarks bottom
+
+% @headings double      turns headings on for double-sided printing.
+% @headings single      turns headings on for single-sided printing.
+% @headings off         turns them off.
+% @headings on          same as @headings double, retained for compatibility.
+% @headings after       turns on double-sided headings after this page.
+% @headings doubleafter turns on double-sided headings after this page.
+% @headings singleafter turns on single-sided headings after this page.
+% By default, they are off at the start of a document,
+% and turned `on' after @end titlepage.
+
+\def\headings #1 {\csname HEADINGS#1\endcsname}
+
+\def\headingsoff{% non-global headings elimination
+  \evenheadline={\hfil}\evenfootline={\hfil}%
+   \oddheadline={\hfil}\oddfootline={\hfil}%
+}
+
+\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting
+\HEADINGSoff  % it's the default
+
+% When we turn headings on, set the page number to 1.
+% For double-sided printing, put current file name in lower left corner,
+% chapter name on inside top of right hand pages, document
+% title on inside top of left hand pages, and page numbers on outside top
+% edge of all pages.
+\def\HEADINGSdouble{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+\let\contentsalignmacro = \chappager
+
+% For single-sided printing, chapter title goes across top left of page,
+% page number on top right.
+\def\HEADINGSsingle{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapter\hfil\folio}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+\def\HEADINGSon{\HEADINGSdouble}
+
+\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
+\let\HEADINGSdoubleafter=\HEADINGSafter
+\def\HEADINGSdoublex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+
+\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
+\def\HEADINGSsinglex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapter\hfil\folio}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+
+% Subroutines used in generating headings
+% This produces Day Month Year style of output.
+% Only define if not already defined, in case a txi-??.tex file has set
+% up a different format (e.g., txi-cs.tex does this).
+\ifx\today\thisisundefined
+\def\today{%
+  \number\day\space
+  \ifcase\month
+  \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
+  \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
+  \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
+  \fi
+  \space\number\year}
+\fi
+
+% @settitle line...  specifies the title of the document, for headings.
+% It generates no output of its own.
+\def\thistitle{\putwordNoTitle}
+\def\settitle{\parsearg{\gdef\thistitle}}
+
+
+\message{tables,}
+% Tables -- @table, @ftable, @vtable, @item(x).
+
+% default indentation of table text
+\newdimen\tableindent \tableindent=.8in
+% default indentation of @itemize and @enumerate text
+\newdimen\itemindent  \itemindent=.3in
+% margin between end of table item and start of table text.
+\newdimen\itemmargin  \itemmargin=.1in
+
+% used internally for \itemindent minus \itemmargin
+\newdimen\itemmax
+
+% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
+% these defs.
+% They also define \itemindex
+% to index the item name in whatever manner is desired (perhaps none).
+
+\newif\ifitemxneedsnegativevskip
+
+\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
+
+\def\internalBitem{\smallbreak \parsearg\itemzzz}
+\def\internalBitemx{\itemxpar \parsearg\itemzzz}
+
+\def\itemzzz #1{\begingroup %
+  \advance\hsize by -\rightskip
+  \advance\hsize by -\tableindent
+  \setbox0=\hbox{\itemindicate{#1}}%
+  \itemindex{#1}%
+  \nobreak % This prevents a break before @itemx.
+  %
+  % If the item text does not fit in the space we have, put it on a line
+  % by itself, and do not allow a page break either before or after that
+  % line.  We do not start a paragraph here because then if the next
+  % command is, e.g., @kindex, the whatsit would get put into the
+  % horizontal list on a line by itself, resulting in extra blank space.
+  \ifdim \wd0>\itemmax
+    %
+    % Make this a paragraph so we get the \parskip glue and wrapping,
+    % but leave it ragged-right.
+    \begingroup
+      \advance\leftskip by-\tableindent
+      \advance\hsize by\tableindent
+      \advance\rightskip by0pt plus1fil\relax
+      \leavevmode\unhbox0\par
+    \endgroup
+    %
+    % We're going to be starting a paragraph, but we don't want the
+    % \parskip glue -- logically it's part of the @item we just started.
+    \nobreak \vskip-\parskip
+    %
+    % Stop a page break at the \parskip glue coming up.  However, if
+    % what follows is an environment such as @example, there will be no
+    % \parskip glue; then the negative vskip we just inserted would
+    % cause the example and the item to crash together.  So we use this
+    % bizarre value of 10001 as a signal to \aboveenvbreak to insert
+    % \parskip glue after all.  Section titles are handled this way also.
+    %
+    \penalty 10001
+    \endgroup
+    \itemxneedsnegativevskipfalse
+  \else
+    % The item text fits into the space.  Start a paragraph, so that the
+    % following text (if any) will end up on the same line.
+    \noindent
+    % Do this with kerns and \unhbox so that if there is a footnote in
+    % the item text, it can migrate to the main vertical list and
+    % eventually be printed.
+    \nobreak\kern-\tableindent
+    \dimen0 = \itemmax  \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
+    \unhbox0
+    \nobreak\kern\dimen0
+    \endgroup
+    \itemxneedsnegativevskiptrue
+  \fi
+}
+
+\def\item{\errmessage{@item while not in a list environment}}
+\def\itemx{\errmessage{@itemx while not in a list environment}}
+
+% @table, @ftable, @vtable.
+\envdef\table{%
+  \let\itemindex\gobble
+  \tablecheck{table}%
+}
+\envdef\ftable{%
+  \def\itemindex ##1{\doind {fn}{\code{##1}}}%
+  \tablecheck{ftable}%
+}
+\envdef\vtable{%
+  \def\itemindex ##1{\doind {vr}{\code{##1}}}%
+  \tablecheck{vtable}%
+}
+\def\tablecheck#1{%
+  \ifnum \the\catcode`\^^M=\active
+    \endgroup
+    \errmessage{This command won't work in this context; perhaps the problem is
+      that we are \inenvironment\thisenv}%
+    \def\next{\doignore{#1}}%
+  \else
+    \let\next\tablex
+  \fi
+  \next
+}
+\def\tablex#1{%
+  \def\itemindicate{#1}%
+  \parsearg\tabley
+}
+\def\tabley#1{%
+  {%
+    \makevalueexpandable
+    \edef\temp{\noexpand\tablez #1\space\space\space}%
+    \expandafter
+  }\temp \endtablez
+}
+\def\tablez #1 #2 #3 #4\endtablez{%
+  \aboveenvbreak
+  \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
+  \ifnum 0#2>0 \tableindent=#2\mil \fi
+  \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
+  \itemmax=\tableindent
+  \advance \itemmax by -\itemmargin
+  \advance \leftskip by \tableindent
+  \exdentamount=\tableindent
+  \parindent = 0pt
+  \parskip = \smallskipamount
+  \ifdim \parskip=0pt \parskip=2pt \fi
+  \let\item = \internalBitem
+  \let\itemx = \internalBitemx
+}
+\def\Etable{\endgraf\afterenvbreak}
+\let\Eftable\Etable
+\let\Evtable\Etable
+\let\Eitemize\Etable
+\let\Eenumerate\Etable
+
+% This is the counter used by @enumerate, which is really @itemize
+
+\newcount \itemno
+
+\envdef\itemize{\parsearg\doitemize}
+
+\def\doitemize#1{%
+  \aboveenvbreak
+  \itemmax=\itemindent
+  \advance\itemmax by -\itemmargin
+  \advance\leftskip by \itemindent
+  \exdentamount=\itemindent
+  \parindent=0pt
+  \parskip=\smallskipamount
+  \ifdim\parskip=0pt \parskip=2pt \fi
+  %
+  % Try typesetting the item mark that if the document erroneously says
+  % something like @itemize @samp (intending @table), there's an error
+  % right away at the @itemize.  It's not the best error message in the
+  % world, but it's better than leaving it to the @item.  This means if
+  % the user wants an empty mark, they have to say @w{} not just @w.
+  \def\itemcontents{#1}%
+  \setbox0 = \hbox{\itemcontents}%
+  %
+  % @itemize with no arg is equivalent to @itemize @bullet.
+  \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
+  %
+  \let\item=\itemizeitem
+}
+
+% Definition of @item while inside @itemize and @enumerate.
+%
+\def\itemizeitem{%
+  \advance\itemno by 1  % for enumerations
+  {\let\par=\endgraf \smallbreak}% reasonable place to break
+  {%
+   % If the document has an @itemize directly after a section title, a
+   % \nobreak will be last on the list, and \sectionheading will have
+   % done a \vskip-\parskip.  In that case, we don't want to zero
+   % parskip, or the item text will crash with the heading.  On the
+   % other hand, when there is normal text preceding the item (as there
+   % usually is), we do want to zero parskip, or there would be too much
+   % space.  In that case, we won't have a \nobreak before.  At least
+   % that's the theory.
+   \ifnum\lastpenalty<10000 \parskip=0in \fi
+   \noindent
+   \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
+   %
+   \vadjust{\penalty 1200}}% not good to break after first line of item.
+  \flushcr
+}
+
+% \splitoff TOKENS\endmark defines \first to be the first token in
+% TOKENS, and \rest to be the remainder.
+%
+\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
+
+% Allow an optional argument of an uppercase letter, lowercase letter,
+% or number, to specify the first label in the enumerated list.  No
+% argument is the same as `1'.
+%
+\envparseargdef\enumerate{\enumeratey #1  \endenumeratey}
+\def\enumeratey #1 #2\endenumeratey{%
+  % If we were given no argument, pretend we were given `1'.
+  \def\thearg{#1}%
+  \ifx\thearg\empty \def\thearg{1}\fi
+  %
+  % Detect if the argument is a single token.  If so, it might be a
+  % letter.  Otherwise, the only valid thing it can be is a number.
+  % (We will always have one token, because of the test we just made.
+  % This is a good thing, since \splitoff doesn't work given nothing at
+  % all -- the first parameter is undelimited.)
+  \expandafter\splitoff\thearg\endmark
+  \ifx\rest\empty
+    % Only one token in the argument.  It could still be anything.
+    % A ``lowercase letter'' is one whose \lccode is nonzero.
+    % An ``uppercase letter'' is one whose \lccode is both nonzero, and
+    %   not equal to itself.
+    % Otherwise, we assume it's a number.
+    %
+    % We need the \relax at the end of the \ifnum lines to stop TeX from
+    % continuing to look for a <number>.
+    %
+    \ifnum\lccode\expandafter`\thearg=0\relax
+      \numericenumerate % a number (we hope)
+    \else
+      % It's a letter.
+      \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
+        \lowercaseenumerate % lowercase letter
+      \else
+        \uppercaseenumerate % uppercase letter
+      \fi
+    \fi
+  \else
+    % Multiple tokens in the argument.  We hope it's a number.
+    \numericenumerate
+  \fi
+}
+
+% An @enumerate whose labels are integers.  The starting integer is
+% given in \thearg.
+%
+\def\numericenumerate{%
+  \itemno = \thearg
+  \startenumeration{\the\itemno}%
+}
+
+% The starting (lowercase) letter is in \thearg.
+\def\lowercaseenumerate{%
+  \itemno = \expandafter`\thearg
+  \startenumeration{%
+    % Be sure we're not beyond the end of the alphabet.
+    \ifnum\itemno=0
+      \errmessage{No more lowercase letters in @enumerate; get a bigger
+                  alphabet}%
+    \fi
+    \char\lccode\itemno
+  }%
+}
+
+% The starting (uppercase) letter is in \thearg.
+\def\uppercaseenumerate{%
+  \itemno = \expandafter`\thearg
+  \startenumeration{%
+    % Be sure we're not beyond the end of the alphabet.
+    \ifnum\itemno=0
+      \errmessage{No more uppercase letters in @enumerate; get a bigger
+                  alphabet}
+    \fi
+    \char\uccode\itemno
+  }%
+}
+
+% Call \doitemize, adding a period to the first argument and supplying the
+% common last two arguments.  Also subtract one from the initial value in
+% \itemno, since @item increments \itemno.
+%
+\def\startenumeration#1{%
+  \advance\itemno by -1
+  \doitemize{#1.}\flushcr
+}
+
+% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
+% to @enumerate.
+%
+\def\alphaenumerate{\enumerate{a}}
+\def\capsenumerate{\enumerate{A}}
+\def\Ealphaenumerate{\Eenumerate}
+\def\Ecapsenumerate{\Eenumerate}
+
+
+% @multitable macros
+% Amy Hendrickson, 8/18/94, 3/6/96
+%
+% @multitable ... @end multitable will make as many columns as desired.
+% Contents of each column will wrap at width given in preamble.  Width
+% can be specified either with sample text given in a template line,
+% or in percent of \hsize, the current width of text on page.
+
+% Table can continue over pages but will only break between lines.
+
+% To make preamble:
+%
+% Either define widths of columns in terms of percent of \hsize:
+%   @multitable @columnfractions .25 .3 .45
+%   @item ...
+%
+%   Numbers following @columnfractions are the percent of the total
+%   current hsize to be used for each column. You may use as many
+%   columns as desired.
+
+
+% Or use a template:
+%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+%   @item ...
+%   using the widest term desired in each column.
+
+% Each new table line starts with @item, each subsequent new column
+% starts with @tab. Empty columns may be produced by supplying @tab's
+% with nothing between them for as many times as empty columns are needed,
+% ie, @tab@tab@tab will produce two empty columns.
+
+% @item, @tab do not need to be on their own lines, but it will not hurt
+% if they are.
+
+% Sample multitable:
+
+%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+%   @item first col stuff @tab second col stuff @tab third col
+%   @item
+%   first col stuff
+%   @tab
+%   second col stuff
+%   @tab
+%   third col
+%   @item first col stuff @tab second col stuff
+%   @tab Many paragraphs of text may be used in any column.
+%
+%         They will wrap at the width determined by the template.
+%   @item@tab@tab This will be in third column.
+%   @end multitable
+
+% Default dimensions may be reset by user.
+% @multitableparskip is vertical space between paragraphs in table.
+% @multitableparindent is paragraph indent in table.
+% @multitablecolmargin is horizontal space to be left between columns.
+% @multitablelinespace is space to leave between table items, baseline
+%                                                            to baseline.
+%   0pt means it depends on current normal line spacing.
+%
+\newskip\multitableparskip
+\newskip\multitableparindent
+\newdimen\multitablecolspace
+\newskip\multitablelinespace
+\multitableparskip=0pt
+\multitableparindent=6pt
+\multitablecolspace=12pt
+\multitablelinespace=0pt
+
+% Macros used to set up halign preamble:
+%
+\let\endsetuptable\relax
+\def\xendsetuptable{\endsetuptable}
+\let\columnfractions\relax
+\def\xcolumnfractions{\columnfractions}
+\newif\ifsetpercent
+
+% #1 is the @columnfraction, usually a decimal number like .5, but might
+% be just 1.  We just use it, whatever it is.
+%
+\def\pickupwholefraction#1 {%
+  \global\advance\colcount by 1
+  \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
+  \setuptable
+}
+
+\newcount\colcount
+\def\setuptable#1{%
+  \def\firstarg{#1}%
+  \ifx\firstarg\xendsetuptable
+    \let\go = \relax
+  \else
+    \ifx\firstarg\xcolumnfractions
+      \global\setpercenttrue
+    \else
+      \ifsetpercent
+         \let\go\pickupwholefraction
+      \else
+         \global\advance\colcount by 1
+         \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
+                   % separator; typically that is always in the input, anyway.
+         \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+      \fi
+    \fi
+    \ifx\go\pickupwholefraction
+      % Put the argument back for the \pickupwholefraction call, so
+      % we'll always have a period there to be parsed.
+      \def\go{\pickupwholefraction#1}%
+    \else
+      \let\go = \setuptable
+    \fi%
+  \fi
+  \go
+}
+
+% multitable-only commands.
+%
+% @headitem starts a heading row, which we typeset in bold.
+% Assignments have to be global since we are inside the implicit group
+% of an alignment entry.  \everycr resets \everytab so we don't have to
+% undo it ourselves.
+\def\headitemfont{\b}% for people to use in the template row; not changeable
+\def\headitem{%
+  \checkenv\multitable
+  \crcr
+  \global\everytab={\bf}% can't use \headitemfont since the parsing differs
+  \the\everytab % for the first item
+}%
+%
+% A \tab used to include \hskip1sp.  But then the space in a template
+% line is not enough.  That is bad.  So let's go back to just `&' until
+% we again encounter the problem the 1sp was intended to solve.
+%					--karl, nathan@acm.org, 20apr99.
+\def\tab{\checkenv\multitable &\the\everytab}%
+
+% @multitable ... @end multitable definitions:
+%
+\newtoks\everytab  % insert after every tab.
+%
+\envdef\multitable{%
+  \vskip\parskip
+  \startsavinginserts
+  %
+  % @item within a multitable starts a normal row.
+  % We use \def instead of \let so that if one of the multitable entries
+  % contains an @itemize, we don't choke on the \item (seen as \crcr aka
+  % \endtemplate) expanding \doitemize.
+  \def\item{\crcr}%
+  %
+  \tolerance=9500
+  \hbadness=9500
+  \setmultitablespacing
+  \parskip=\multitableparskip
+  \parindent=\multitableparindent
+  \overfullrule=0pt
+  \global\colcount=0
+  %
+  \everycr = {%
+    \noalign{%
+      \global\everytab={}%
+      \global\colcount=0 % Reset the column counter.
+      % Check for saved footnotes, etc.
+      \checkinserts
+      % Keeps underfull box messages off when table breaks over pages.
+      %\filbreak
+	% Maybe so, but it also creates really weird page breaks when the
+	% table breaks over pages. Wouldn't \vfil be better?  Wait until the
+	% problem manifests itself, so it can be fixed for real --karl.
+    }%
+  }%
+  %
+  \parsearg\domultitable
+}
+\def\domultitable#1{%
+  % To parse everything between @multitable and @item:
+  \setuptable#1 \endsetuptable
+  %
+  % This preamble sets up a generic column definition, which will
+  % be used as many times as user calls for columns.
+  % \vtop will set a single line and will also let text wrap and
+  % continue for many paragraphs if desired.
+  \halign\bgroup &%
+    \global\advance\colcount by 1
+    \multistrut
+    \vtop{%
+      % Use the current \colcount to find the correct column width:
+      \hsize=\expandafter\csname col\the\colcount\endcsname
+      %
+      % In order to keep entries from bumping into each other
+      % we will add a \leftskip of \multitablecolspace to all columns after
+      % the first one.
+      %
+      % If a template has been used, we will add \multitablecolspace
+      % to the width of each template entry.
+      %
+      % If the user has set preamble in terms of percent of \hsize we will
+      % use that dimension as the width of the column, and the \leftskip
+      % will keep entries from bumping into each other.  Table will start at
+      % left margin and final column will justify at right margin.
+      %
+      % Make sure we don't inherit \rightskip from the outer environment.
+      \rightskip=0pt
+      \ifnum\colcount=1
+	% The first column will be indented with the surrounding text.
+	\advance\hsize by\leftskip
+      \else
+	\ifsetpercent \else
+	  % If user has not set preamble in terms of percent of \hsize
+	  % we will advance \hsize by \multitablecolspace.
+	  \advance\hsize by \multitablecolspace
+	\fi
+       % In either case we will make \leftskip=\multitablecolspace:
+      \leftskip=\multitablecolspace
+      \fi
+      % Ignoring space at the beginning and end avoids an occasional spurious
+      % blank line, when TeX decides to break the line at the space before the
+      % box from the multistrut, so the strut ends up on a line by itself.
+      % For example:
+      % @multitable @columnfractions .11 .89
+      % @item @code{#}
+      % @tab Legal holiday which is valid in major parts of the whole country.
+      % Is automatically provided with highlighting sequences respectively
+      % marking characters.
+      \noindent\ignorespaces##\unskip\multistrut
+    }\cr
+}
+\def\Emultitable{%
+  \crcr
+  \egroup % end the \halign
+  \global\setpercentfalse
+}
+
+\def\setmultitablespacing{%
+  \def\multistrut{\strut}% just use the standard line spacing
+  %
+  % Compute \multitablelinespace (if not defined by user) for use in
+  % \multitableparskip calculation.  We used define \multistrut based on
+  % this, but (ironically) that caused the spacing to be off.
+  % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
+\ifdim\multitablelinespace=0pt
+\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
+\global\advance\multitablelinespace by-\ht0
+\fi
+% Test to see if parskip is larger than space between lines of
+% table. If not, do nothing.
+%        If so, set to same dimension as multitablelinespace.
+\ifdim\multitableparskip>\multitablelinespace
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
+\fi%
+\ifdim\multitableparskip=0pt
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
+\fi}
+
+
+\message{conditionals,}
+
+% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
+% @ifnotxml always succeed.  They currently do nothing; we don't
+% attempt to check whether the conditionals are properly nested.  But we
+% have to remember that they are conditionals, so that @end doesn't
+% attempt to close an environment group.
+%
+\def\makecond#1{%
+  \expandafter\let\csname #1\endcsname = \relax
+  \expandafter\let\csname iscond.#1\endcsname = 1
+}
+\makecond{iftex}
+\makecond{ifnotdocbook}
+\makecond{ifnothtml}
+\makecond{ifnotinfo}
+\makecond{ifnotplaintext}
+\makecond{ifnotxml}
+
+% Ignore @ignore, @ifhtml, @ifinfo, and the like.
+%
+\def\direntry{\doignore{direntry}}
+\def\documentdescription{\doignore{documentdescription}}
+\def\docbook{\doignore{docbook}}
+\def\html{\doignore{html}}
+\def\ifdocbook{\doignore{ifdocbook}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\ifinfo{\doignore{ifinfo}}
+\def\ifnottex{\doignore{ifnottex}}
+\def\ifplaintext{\doignore{ifplaintext}}
+\def\ifxml{\doignore{ifxml}}
+\def\ignore{\doignore{ignore}}
+\def\menu{\doignore{menu}}
+\def\xml{\doignore{xml}}
+
+% Ignore text until a line `@end #1', keeping track of nested conditionals.
+%
+% A count to remember the depth of nesting.
+\newcount\doignorecount
+
+\def\doignore#1{\begingroup
+  % Scan in ``verbatim'' mode:
+  \obeylines
+  \catcode`\@ = \other
+  \catcode`\{ = \other
+  \catcode`\} = \other
+  %
+  % Make sure that spaces turn into tokens that match what \doignoretext wants.
+  \spaceisspace
+  %
+  % Count number of #1's that we've seen.
+  \doignorecount = 0
+  %
+  % Swallow text until we reach the matching `@end #1'.
+  \dodoignore{#1}%
+}
+
+{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
+  \obeylines %
+  %
+  \gdef\dodoignore#1{%
+    % #1 contains the command name as a string, e.g., `ifinfo'.
+    %
+    % Define a command to find the next `@end #1'.
+    \long\def\doignoretext##1^^M@end #1{%
+      \doignoretextyyy##1^^M@#1\_STOP_}%
+    %
+    % And this command to find another #1 command, at the beginning of a
+    % line.  (Otherwise, we would consider a line `@c @ifset', for
+    % example, to count as an @ifset for nesting.)
+    \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
+    %
+    % And now expand that command.
+    \doignoretext ^^M%
+  }%
+}
+
+\def\doignoreyyy#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty			% Nothing found.
+    \let\next\doignoretextzzz
+  \else					% Found a nested condition, ...
+    \advance\doignorecount by 1
+    \let\next\doignoretextyyy		% ..., look for another.
+    % If we're here, #1 ends with ^^M\ifinfo (for example).
+  \fi
+  \next #1% the token \_STOP_ is present just after this macro.
+}
+
+% We have to swallow the remaining "\_STOP_".
+%
+\def\doignoretextzzz#1{%
+  \ifnum\doignorecount = 0	% We have just found the outermost @end.
+    \let\next\enddoignore
+  \else				% Still inside a nested condition.
+    \advance\doignorecount by -1
+    \let\next\doignoretext      % Look for the next @end.
+  \fi
+  \next
+}
+
+% Finish off ignored text.
+{ \obeylines%
+  % Ignore anything after the last `@end #1'; this matters in verbatim
+  % environments, where otherwise the newline after an ignored conditional
+  % would result in a blank line in the output.
+  \gdef\enddoignore#1^^M{\endgroup\ignorespaces}%
+}
+
+
+% @set VAR sets the variable VAR to an empty value.
+% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
+%
+% Since we want to separate VAR from REST-OF-LINE (which might be
+% empty), we can't just use \parsearg; we have to insert a space of our
+% own to delimit the rest of the line, and then take it out again if we
+% didn't need it.
+% We rely on the fact that \parsearg sets \catcode`\ =10.
+%
+\parseargdef\set{\setyyy#1 \endsetyyy}
+\def\setyyy#1 #2\endsetyyy{%
+  {%
+    \makevalueexpandable
+    \def\temp{#2}%
+    \edef\next{\gdef\makecsname{SET#1}}%
+    \ifx\temp\empty
+      \next{}%
+    \else
+      \setzzz#2\endsetzzz
+    \fi
+  }%
+}
+% Remove the trailing space \setxxx inserted.
+\def\setzzz#1 \endsetzzz{\next{#1}}
+
+% @clear VAR clears (i.e., unsets) the variable VAR.
+%
+\parseargdef\clear{%
+  {%
+    \makevalueexpandable
+    \global\expandafter\let\csname SET#1\endcsname=\relax
+  }%
+}
+
+% @value{foo} gets the text saved in variable foo.
+\def\value{\begingroup\makevalueexpandable\valuexxx}
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
+{
+  \catcode`\- = \active \catcode`\_ = \active
+  %
+  \gdef\makevalueexpandable{%
+    \let\value = \expandablevalue
+    % We don't want these characters active, ...
+    \catcode`\-=\other \catcode`\_=\other
+    % ..., but we might end up with active ones in the argument if
+    % we're called from @code, as @code{@value{foo-bar_}}, though.
+    % So \let them to their normal equivalents.
+    \let-\normaldash \let_\normalunderscore
+  }
+}
+
+% We have this subroutine so that we can handle at least some @value's
+% properly in indexes (we call \makevalueexpandable in \indexdummies).
+% The command has to be fully expandable (if the variable is set), since
+% the result winds up in the index file.  This means that if the
+% variable's value contains other Texinfo commands, it's almost certain
+% it will fail (although perhaps we could fix that with sufficient work
+% to do a one-level expansion on the result, instead of complete).
+%
+\def\expandablevalue#1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    {[No value for ``#1'']}%
+    \message{Variable `#1', used in @value, is not set.}%
+  \else
+    \csname SET#1\endcsname
+  \fi
+}
+
+% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
+% with @set.
+%
+% To get special treatment of `@end ifset,' call \makeond and the redefine.
+%
+\makecond{ifset}
+\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
+\def\doifset#1#2{%
+  {%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname SET#2\endcsname\relax
+      #1% If not set, redefine \next.
+    \fi
+    \expandafter
+  }\next
+}
+\def\ifsetfail{\doignore{ifset}}
+
+% @ifclear VAR ... @end executes the `...' iff VAR has never been
+% defined with @set, or has been undefined with @clear.
+%
+% The `\else' inside the `\doifset' parameter is a trick to reuse the
+% above code: if the variable is not set, do nothing, if it is set,
+% then redefine \next to \ifclearfail.
+%
+\makecond{ifclear}
+\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
+\def\ifclearfail{\doignore{ifclear}}
+
+% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written
+% without the @) is in fact defined.  We can only feasibly check at the
+% TeX level, so something like `mathcode' is going to considered
+% defined even though it is not a Texinfo command.
+% 
+\makecond{ifcommanddefined}
+\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
+%
+\def\doifcmddefined#1#2{{%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname #2\endcsname\relax
+      #1% If not defined, \let\next as above.
+    \fi
+    \expandafter
+  }\next
+}
+\def\ifcmddefinedfail{\doignore{ifcommanddefined}}
+
+% @ifcommandnotdefined CMD ... handled similar to @ifclear above.
+\makecond{ifcommandnotdefined}
+\def\ifcommandnotdefined{%
+  \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}}
+\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}}
+
+% Set the `txicommandconditionals' variable, so documents have a way to
+% test if the @ifcommand...defined conditionals are available.
+\set txicommandconditionals
+
+% @dircategory CATEGORY  -- specify a category of the dir file
+% which this file should belong to.  Ignore this in TeX.
+\let\dircategory=\comment
+
+% @defininfoenclose.
+\let\definfoenclose=\comment
+
+
+\message{indexing,}
+% Index generation facilities
+
+% Define \newwrite to be identical to plain tex's \newwrite
+% except not \outer, so it can be used within macros and \if's.
+\edef\newwrite{\makecsname{ptexnewwrite}}
+
+% \newindex {foo} defines an index named foo.
+% It automatically defines \fooindex such that
+% \fooindex ...rest of line... puts an entry in the index foo.
+% It also defines \fooindfile to be the number of the output channel for
+% the file that accumulates this index.  The file's extension is foo.
+% The name of an index should be no more than 2 characters long
+% for the sake of vms.
+%
+\def\newindex#1{%
+  \iflinks
+    \expandafter\newwrite \csname#1indfile\endcsname
+    \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+  \fi
+  \expandafter\xdef\csname#1index\endcsname{%     % Define @#1index
+    \noexpand\doindex{#1}}
+}
+
+% @defindex foo  ==  \newindex{foo}
+%
+\def\defindex{\parsearg\newindex}
+
+% Define @defcodeindex, like @defindex except put all entries in @code.
+%
+\def\defcodeindex{\parsearg\newcodeindex}
+%
+\def\newcodeindex#1{%
+  \iflinks
+    \expandafter\newwrite \csname#1indfile\endcsname
+    \openout \csname#1indfile\endcsname \jobname.#1
+  \fi
+  \expandafter\xdef\csname#1index\endcsname{%
+    \noexpand\docodeindex{#1}}%
+}
+
+
+% @synindex foo bar    makes index foo feed into index bar.
+% Do this instead of @defindex foo if you don't want it as a separate index.
+%
+% @syncodeindex foo bar   similar, but put all entries made for index foo
+% inside @code.
+%
+\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
+\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
+
+% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
+% #3 the target index (bar).
+\def\dosynindex#1#2#3{%
+  % Only do \closeout if we haven't already done it, else we'll end up
+  % closing the target index.
+  \expandafter \ifx\csname donesynindex#2\endcsname \relax
+    % The \closeout helps reduce unnecessary open files; the limit on the
+    % Acorn RISC OS is a mere 16 files.
+    \expandafter\closeout\csname#2indfile\endcsname
+    \expandafter\let\csname donesynindex#2\endcsname = 1
+  \fi
+  % redefine \fooindfile:
+  \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
+  \expandafter\let\csname#2indfile\endcsname=\temp
+  % redefine \fooindex:
+  \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
+}
+
+% Define \doindex, the driver for all \fooindex macros.
+% Argument #1 is generated by the calling \fooindex macro,
+%  and it is "foo", the name of the index.
+
+% \doindex just uses \parsearg; it calls \doind for the actual work.
+% This is because \doind is more useful to call from other macros.
+
+% There is also \dosubind {index}{topic}{subtopic}
+% which makes an entry in a two-level index such as the operation index.
+
+\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
+\def\singleindexer #1{\doind{\indexname}{#1}}
+
+% like the previous two, but they put @code around the argument.
+\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
+\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
+
+% Take care of Texinfo commands that can appear in an index entry.
+% Since there are some commands we want to expand, and others we don't,
+% we have to laboriously prevent expansion for those that we don't.
+%
+\def\indexdummies{%
+  \escapechar = `\\     % use backslash in output files.
+  \def\@{@}% change to @@ when we switch to @ as escape char in index files.
+  \def\ {\realbackslash\space }%
+  %
+  % Need these unexpandable (because we define \tt as a dummy)
+  % definitions when @{ or @} appear in index entry text.  Also, more
+  % complicated, when \tex is in effect and \{ is a \delimiter again.
+  % We can't use \lbracecmd and \rbracecmd because texindex assumes
+  % braces and backslashes are used only as delimiters.  Perhaps we
+  % should define @lbrace and @rbrace commands a la @comma.
+  \def\{{{\tt\char123}}%
+  \def\}{{\tt\char125}}%
+  %
+  % I don't entirely understand this, but when an index entry is
+  % generated from a macro call, the \endinput which \scanmacro inserts
+  % causes processing to be prematurely terminated.  This is,
+  % apparently, because \indexsorttmp is fully expanded, and \endinput
+  % is an expandable command.  The redefinition below makes \endinput
+  % disappear altogether for that purpose -- although logging shows that
+  % processing continues to some further point.  On the other hand, it
+  % seems \endinput does not hurt in the printed index arg, since that
+  % is still getting written without apparent harm.
+  %
+  % Sample source (mac-idx3.tex, reported by Graham Percival to
+  % help-texinfo, 22may06):
+  % @macro funindex {WORD}
+  % @findex xyz
+  % @end macro
+  % ...
+  % @funindex commtest
+  %
+  % The above is not enough to reproduce the bug, but it gives the flavor.
+  %
+  % Sample whatsit resulting:
+  % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}}
+  %
+  % So:
+  \let\endinput = \empty
+  %
+  % Do the redefinitions.
+  \commondummies
+}
+
+% For the aux and toc files, @ is the escape character.  So we want to
+% redefine everything using @ as the escape character (instead of
+% \realbackslash, still used for index files).  When everything uses @,
+% this will be simpler.
+%
+\def\atdummies{%
+  \def\@{@@}%
+  \def\ {@ }%
+  \let\{ = \lbraceatcmd
+  \let\} = \rbraceatcmd
+  %
+  % Do the redefinitions.
+  \commondummies
+  \otherbackslash
+}
+
+% Called from \indexdummies and \atdummies.
+%
+\def\commondummies{%
+  %
+  % \definedummyword defines \#1 as \string\#1\space, thus effectively
+  % preventing its expansion.  This is used only for control words,
+  % not control letters, because the \space would be incorrect for
+  % control characters, but is needed to separate the control word
+  % from whatever follows.
+  %
+  % For control letters, we have \definedummyletter, which omits the
+  % space.
+  %
+  % These can be used both for control words that take an argument and
+  % those that do not.  If it is followed by {arg} in the input, then
+  % that will dutifully get written to the index (or wherever).
+  %
+  \def\definedummyword  ##1{\def##1{\string##1\space}}%
+  \def\definedummyletter##1{\def##1{\string##1}}%
+  \let\definedummyaccent\definedummyletter
+  %
+  \commondummiesnofonts
+  %
+  \definedummyletter\_%
+  \definedummyletter\-%
+  %
+  % Non-English letters.
+  \definedummyword\AA
+  \definedummyword\AE
+  \definedummyword\DH
+  \definedummyword\L
+  \definedummyword\O
+  \definedummyword\OE
+  \definedummyword\TH
+  \definedummyword\aa
+  \definedummyword\ae
+  \definedummyword\dh
+  \definedummyword\exclamdown
+  \definedummyword\l
+  \definedummyword\o
+  \definedummyword\oe
+  \definedummyword\ordf
+  \definedummyword\ordm
+  \definedummyword\questiondown
+  \definedummyword\ss
+  \definedummyword\th
+  %
+  % Although these internal commands shouldn't show up, sometimes they do.
+  \definedummyword\bf
+  \definedummyword\gtr
+  \definedummyword\hat
+  \definedummyword\less
+  \definedummyword\sf
+  \definedummyword\sl
+  \definedummyword\tclose
+  \definedummyword\tt
+  %
+  \definedummyword\LaTeX
+  \definedummyword\TeX
+  %
+  % Assorted special characters.
+  \definedummyword\arrow
+  \definedummyword\bullet
+  \definedummyword\comma
+  \definedummyword\copyright
+  \definedummyword\registeredsymbol
+  \definedummyword\dots
+  \definedummyword\enddots
+  \definedummyword\entrybreak
+  \definedummyword\equiv
+  \definedummyword\error
+  \definedummyword\euro
+  \definedummyword\expansion
+  \definedummyword\geq
+  \definedummyword\guillemetleft
+  \definedummyword\guillemetright
+  \definedummyword\guilsinglleft
+  \definedummyword\guilsinglright
+  \definedummyword\lbracechar
+  \definedummyword\leq
+  \definedummyword\minus
+  \definedummyword\ogonek
+  \definedummyword\pounds
+  \definedummyword\point
+  \definedummyword\print
+  \definedummyword\quotedblbase
+  \definedummyword\quotedblleft
+  \definedummyword\quotedblright
+  \definedummyword\quoteleft
+  \definedummyword\quoteright
+  \definedummyword\quotesinglbase
+  \definedummyword\rbracechar
+  \definedummyword\result
+  \definedummyword\textdegree
+  %
+  % We want to disable all macros so that they are not expanded by \write.
+  \macrolist
+  %
+  \normalturnoffactive
+  %
+  % Handle some cases of @value -- where it does not contain any
+  % (non-fully-expandable) commands.
+  \makevalueexpandable
+}
+
+% \commondummiesnofonts: common to \commondummies and \indexnofonts.
+%
+\def\commondummiesnofonts{%
+  % Control letters and accents.
+  \definedummyletter\!%
+  \definedummyaccent\"%
+  \definedummyaccent\'%
+  \definedummyletter\*%
+  \definedummyaccent\,%
+  \definedummyletter\.%
+  \definedummyletter\/%
+  \definedummyletter\:%
+  \definedummyaccent\=%
+  \definedummyletter\?%
+  \definedummyaccent\^%
+  \definedummyaccent\`%
+  \definedummyaccent\~%
+  \definedummyword\u
+  \definedummyword\v
+  \definedummyword\H
+  \definedummyword\dotaccent
+  \definedummyword\ogonek
+  \definedummyword\ringaccent
+  \definedummyword\tieaccent
+  \definedummyword\ubaraccent
+  \definedummyword\udotaccent
+  \definedummyword\dotless
+  %
+  % Texinfo font commands.
+  \definedummyword\b
+  \definedummyword\i
+  \definedummyword\r
+  \definedummyword\sansserif
+  \definedummyword\sc
+  \definedummyword\slanted
+  \definedummyword\t
+  %
+  % Commands that take arguments.
+  \definedummyword\abbr
+  \definedummyword\acronym
+  \definedummyword\anchor
+  \definedummyword\cite
+  \definedummyword\code
+  \definedummyword\command
+  \definedummyword\dfn
+  \definedummyword\dmn
+  \definedummyword\email
+  \definedummyword\emph
+  \definedummyword\env
+  \definedummyword\file
+  \definedummyword\image
+  \definedummyword\indicateurl
+  \definedummyword\inforef
+  \definedummyword\kbd
+  \definedummyword\key
+  \definedummyword\math
+  \definedummyword\option
+  \definedummyword\pxref
+  \definedummyword\ref
+  \definedummyword\samp
+  \definedummyword\strong
+  \definedummyword\tie
+  \definedummyword\uref
+  \definedummyword\url
+  \definedummyword\var
+  \definedummyword\verb
+  \definedummyword\w
+  \definedummyword\xref
+}
+
+% \indexnofonts is used when outputting the strings to sort the index
+% by, and when constructing control sequence names.  It eliminates all
+% control sequences and just writes whatever the best ASCII sort string
+% would be for a given command (usually its argument).
+%
+\def\indexnofonts{%
+  % Accent commands should become @asis.
+  \def\definedummyaccent##1{\let##1\asis}%
+  % We can just ignore other control letters.
+  \def\definedummyletter##1{\let##1\empty}%
+  % All control words become @asis by default; overrides below.
+  \let\definedummyword\definedummyaccent
+  %
+  \commondummiesnofonts
+  %
+  % Don't no-op \tt, since it isn't a user-level command
+  % and is used in the definitions of the active chars like <, >, |, etc.
+  % Likewise with the other plain tex font commands.
+  %\let\tt=\asis
+  %
+  \def\ { }%
+  \def\@{@}%
+  \def\_{\normalunderscore}%
+  \def\-{}% @- shouldn't affect sorting
+  %
+  % Unfortunately, texindex is not prepared to handle braces in the
+  % content at all.  So for index sorting, we map @{ and @} to strings
+  % starting with |, since that ASCII character is between ASCII { and }.
+  \def\{{|a}%
+  \def\lbracechar{|a}%
+  %
+  \def\}{|b}%
+  \def\rbracechar{|b}%
+  %
+  % Non-English letters.
+  \def\AA{AA}%
+  \def\AE{AE}%
+  \def\DH{DZZ}%
+  \def\L{L}%
+  \def\OE{OE}%
+  \def\O{O}%
+  \def\TH{ZZZ}%
+  \def\aa{aa}%
+  \def\ae{ae}%
+  \def\dh{dzz}%
+  \def\exclamdown{!}%
+  \def\l{l}%
+  \def\oe{oe}%
+  \def\ordf{a}%
+  \def\ordm{o}%
+  \def\o{o}%
+  \def\questiondown{?}%
+  \def\ss{ss}%
+  \def\th{zzz}%
+  %
+  \def\LaTeX{LaTeX}%
+  \def\TeX{TeX}%
+  %
+  % Assorted special characters.
+  % (The following {} will end up in the sort string, but that's ok.)
+  \def\arrow{->}%
+  \def\bullet{bullet}%
+  \def\comma{,}%
+  \def\copyright{copyright}%
+  \def\dots{...}%
+  \def\enddots{...}%
+  \def\equiv{==}%
+  \def\error{error}%
+  \def\euro{euro}%
+  \def\expansion{==>}%
+  \def\geq{>=}%
+  \def\guillemetleft{<<}%
+  \def\guillemetright{>>}%
+  \def\guilsinglleft{<}%
+  \def\guilsinglright{>}%
+  \def\leq{<=}%
+  \def\minus{-}%
+  \def\point{.}%
+  \def\pounds{pounds}%
+  \def\print{-|}%
+  \def\quotedblbase{"}%
+  \def\quotedblleft{"}%
+  \def\quotedblright{"}%
+  \def\quoteleft{`}%
+  \def\quoteright{'}%
+  \def\quotesinglbase{,}%
+  \def\registeredsymbol{R}%
+  \def\result{=>}%
+  \def\textdegree{o}%
+  %
+  \expandafter\ifx\csname SETtxiindexlquoteignore\endcsname\relax
+  \else \indexlquoteignore \fi
+  %
+  % We need to get rid of all macros, leaving only the arguments (if present).
+  % Of course this is not nearly correct, but it is the best we can do for now.
+  % makeinfo does not expand macros in the argument to @deffn, which ends up
+  % writing an index entry, and texindex isn't prepared for an index sort entry
+  % that starts with \.
+  %
+  % Since macro invocations are followed by braces, we can just redefine them
+  % to take a single TeX argument.  The case of a macro invocation that
+  % goes to end-of-line is not handled.
+  %
+  \macrolist
+}
+
+% Undocumented (for FSFS 2nd ed.): @set txiindexlquoteignore makes us
+% ignore left quotes in the sort term.
+{\catcode`\`=\active
+ \gdef\indexlquoteignore{\let`=\empty}}
+
+\let\indexbackslash=0  %overridden during \printindex.
+\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
+
+% Most index entries go through here, but \dosubind is the general case.
+% #1 is the index name, #2 is the entry text.
+\def\doind#1#2{\dosubind{#1}{#2}{}}
+
+% Workhorse for all \fooindexes.
+% #1 is name of index, #2 is stuff to put there, #3 is subentry --
+% empty if called from \doind, as we usually are (the main exception
+% is with most defuns, which call us directly).
+%
+\def\dosubind#1#2#3{%
+  \iflinks
+  {%
+    % Store the main index entry text (including the third arg).
+    \toks0 = {#2}%
+    % If third arg is present, precede it with a space.
+    \def\thirdarg{#3}%
+    \ifx\thirdarg\empty \else
+      \toks0 = \expandafter{\the\toks0 \space #3}%
+    \fi
+    %
+    \edef\writeto{\csname#1indfile\endcsname}%
+    %
+    \safewhatsit\dosubindwrite
+  }%
+  \fi
+}
+
+% Write the entry in \toks0 to the index file:
+%
+\def\dosubindwrite{%
+  % Put the index entry in the margin if desired.
+  \ifx\SETmarginindex\relax\else
+    \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
+  \fi
+  %
+  % Remember, we are within a group.
+  \indexdummies % Must do this here, since \bf, etc expand at this stage
+  \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
+      % so it will be output as is; and it will print as backslash.
+  %
+  % Process the index entry with all font commands turned off, to
+  % get the string to sort by.
+  {\indexnofonts
+   \edef\temp{\the\toks0}% need full expansion
+   \xdef\indexsorttmp{\temp}%
+  }%
+  %
+  % Set up the complete index entry, with both the sort key and
+  % the original text, including any font commands.  We write
+  % three arguments to \entry to the .?? file (four in the
+  % subentry case), texindex reduces to two when writing the .??s
+  % sorted result.
+  \edef\temp{%
+    \write\writeto{%
+      \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
+  }%
+  \temp
+}
+
+% Take care of unwanted page breaks/skips around a whatsit:
+%
+% If a skip is the last thing on the list now, preserve it
+% by backing up by \lastskip, doing the \write, then inserting
+% the skip again.  Otherwise, the whatsit generated by the
+% \write or \pdfdest will make \lastskip zero.  The result is that
+% sequences like this:
+% @end defun
+% @tindex whatever
+% @defun ...
+% will have extra space inserted, because the \medbreak in the
+% start of the @defun won't see the skip inserted by the @end of
+% the previous defun.
+%
+% But don't do any of this if we're not in vertical mode.  We
+% don't want to do a \vskip and prematurely end a paragraph.
+%
+% Avoid page breaks due to these extra skips, too.
+%
+% But wait, there is a catch there:
+% We'll have to check whether \lastskip is zero skip.  \ifdim is not
+% sufficient for this purpose, as it ignores stretch and shrink parts
+% of the skip.  The only way seems to be to check the textual
+% representation of the skip.
+%
+% The following is almost like \def\zeroskipmacro{0.0pt} except that
+% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
+%
+\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
+%
+\newskip\whatsitskip
+\newcount\whatsitpenalty
+%
+% ..., ready, GO:
+%
+\def\safewhatsit#1{\ifhmode
+  #1%
+ \else
+  % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
+  \whatsitskip = \lastskip
+  \edef\lastskipmacro{\the\lastskip}%
+  \whatsitpenalty = \lastpenalty
+  %
+  % If \lastskip is nonzero, that means the last item was a
+  % skip.  And since a skip is discardable, that means this
+  % -\whatsitskip glue we're inserting is preceded by a
+  % non-discardable item, therefore it is not a potential
+  % breakpoint, therefore no \nobreak needed.
+  \ifx\lastskipmacro\zeroskipmacro
+  \else
+    \vskip-\whatsitskip
+  \fi
+  %
+  #1%
+  %
+  \ifx\lastskipmacro\zeroskipmacro
+    % If \lastskip was zero, perhaps the last item was a penalty, and
+    % perhaps it was >=10000, e.g., a \nobreak.  In that case, we want
+    % to re-insert the same penalty (values >10000 are used for various
+    % signals); since we just inserted a non-discardable item, any
+    % following glue (such as a \parskip) would be a breakpoint.  For example:
+    %   @deffn deffn-whatever
+    %   @vindex index-whatever
+    %   Description.
+    % would allow a break between the index-whatever whatsit
+    % and the "Description." paragraph.
+    \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi
+  \else
+    % On the other hand, if we had a nonzero \lastskip,
+    % this make-up glue would be preceded by a non-discardable item
+    % (the whatsit from the \write), so we must insert a \nobreak.
+    \nobreak\vskip\whatsitskip
+  \fi
+\fi}
+
+% The index entry written in the file actually looks like
+%  \entry {sortstring}{page}{topic}
+% or
+%  \entry {sortstring}{page}{topic}{subtopic}
+% The texindex program reads in these files and writes files
+% containing these kinds of lines:
+%  \initial {c}
+%     before the first topic whose initial is c
+%  \entry {topic}{pagelist}
+%     for a topic that is used without subtopics
+%  \primary {topic}
+%     for the beginning of a topic that is used with subtopics
+%  \secondary {subtopic}{pagelist}
+%     for each subtopic.
+
+% Define the user-accessible indexing commands
+% @findex, @vindex, @kindex, @cindex.
+
+\def\findex {\fnindex}
+\def\kindex {\kyindex}
+\def\cindex {\cpindex}
+\def\vindex {\vrindex}
+\def\tindex {\tpindex}
+\def\pindex {\pgindex}
+
+\def\cindexsub {\begingroup\obeylines\cindexsub}
+{\obeylines %
+\gdef\cindexsub "#1" #2^^M{\endgroup %
+\dosubind{cp}{#2}{#1}}}
+
+% Define the macros used in formatting output of the sorted index material.
+
+% @printindex causes a particular index (the ??s file) to get printed.
+% It does not print any chapter heading (usually an @unnumbered).
+%
+\parseargdef\printindex{\begingroup
+  \dobreak \chapheadingskip{10000}%
+  %
+  \smallfonts \rm
+  \tolerance = 9500
+  \plainfrenchspacing
+  \everypar = {}% don't want the \kern\-parindent from indentation suppression.
+  %
+  % See if the index file exists and is nonempty.
+  % Change catcode of @ here so that if the index file contains
+  % \initial {@}
+  % as its first line, TeX doesn't complain about mismatched braces
+  % (because it thinks @} is a control sequence).
+  \catcode`\@ = 11
+  \openin 1 \jobname.#1s
+  \ifeof 1
+    % \enddoublecolumns gets confused if there is no text in the index,
+    % and it loses the chapter title and the aux file entries for the
+    % index.  The easiest way to prevent this problem is to make sure
+    % there is some text.
+    \putwordIndexNonexistent
+  \else
+    %
+    % If the index file exists but is empty, then \openin leaves \ifeof
+    % false.  We have to make TeX try to read something from the file, so
+    % it can discover if there is anything in it.
+    \read 1 to \temp
+    \ifeof 1
+      \putwordIndexIsEmpty
+    \else
+      % Index files are almost Texinfo source, but we use \ as the escape
+      % character.  It would be better to use @, but that's too big a change
+      % to make right now.
+      \def\indexbackslash{\backslashcurfont}%
+      \catcode`\\ = 0
+      \escapechar = `\\
+      \begindoublecolumns
+      \input \jobname.#1s
+      \enddoublecolumns
+    \fi
+  \fi
+  \closein 1
+\endgroup}
+
+% These macros are used by the sorted index file itself.
+% Change them to control the appearance of the index.
+
+\def\initial#1{{%
+  % Some minor font changes for the special characters.
+  \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
+  %
+  % Remove any glue we may have, we'll be inserting our own.
+  \removelastskip
+  %
+  % We like breaks before the index initials, so insert a bonus.
+  \nobreak
+  \vskip 0pt plus 3\baselineskip
+  \penalty 0
+  \vskip 0pt plus -3\baselineskip
+  %
+  % Typeset the initial.  Making this add up to a whole number of
+  % baselineskips increases the chance of the dots lining up from column
+  % to column.  It still won't often be perfect, because of the stretch
+  % we need before each entry, but it's better.
+  %
+  % No shrink because it confuses \balancecolumns.
+  \vskip 1.67\baselineskip plus .5\baselineskip
+  \leftline{\secbf #1}%
+  % Do our best not to break after the initial.
+  \nobreak
+  \vskip .33\baselineskip plus .1\baselineskip
+}}
+
+% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
+% then page number (#2) flushed to the right margin.  It is used for index
+% and table of contents entries.  The paragraph is indented by \leftskip.
+%
+% A straightforward implementation would start like this:
+%	\def\entry#1#2{...
+% But this freezes the catcodes in the argument, and can cause problems to
+% @code, which sets - active.  This problem was fixed by a kludge---
+% ``-'' was active throughout whole index, but this isn't really right.
+% The right solution is to prevent \entry from swallowing the whole text.
+%                                 --kasal, 21nov03
+\def\entry{%
+  \begingroup
+    %
+    % Start a new paragraph if necessary, so our assignments below can't
+    % affect previous text.
+    \par
+    %
+    % Do not fill out the last line with white space.
+    \parfillskip = 0in
+    %
+    % No extra space above this paragraph.
+    \parskip = 0in
+    %
+    % Do not prefer a separate line ending with a hyphen to fewer lines.
+    \finalhyphendemerits = 0
+    %
+    % \hangindent is only relevant when the entry text and page number
+    % don't both fit on one line.  In that case, bob suggests starting the
+    % dots pretty far over on the line.  Unfortunately, a large
+    % indentation looks wrong when the entry text itself is broken across
+    % lines.  So we use a small indentation and put up with long leaders.
+    %
+    % \hangafter is reset to 1 (which is the value we want) at the start
+    % of each paragraph, so we need not do anything with that.
+    \hangindent = 2em
+    %
+    % When the entry text needs to be broken, just fill out the first line
+    % with blank space.
+    \rightskip = 0pt plus1fil
+    %
+    % A bit of stretch before each entry for the benefit of balancing
+    % columns.
+    \vskip 0pt plus1pt
+    %
+    % When reading the text of entry, convert explicit line breaks
+    % from @* into spaces.  The user might give these in long section
+    % titles, for instance.
+    \def\*{\unskip\space\ignorespaces}%
+    \def\entrybreak{\hfil\break}%
+    %
+    % Swallow the left brace of the text (first parameter):
+    \afterassignment\doentry
+    \let\temp =
+}
+\def\entrybreak{\unskip\space\ignorespaces}%
+\def\doentry{%
+    \bgroup % Instead of the swallowed brace.
+      \noindent
+      \aftergroup\finishentry
+      % And now comes the text of the entry.
+}
+\def\finishentry#1{%
+    % #1 is the page number.
+    %
+    % The following is kludged to not output a line of dots in the index if
+    % there are no page numbers.  The next person who breaks this will be
+    % cursed by a Unix daemon.
+    \setbox\boxA = \hbox{#1}%
+    \ifdim\wd\boxA = 0pt
+      \ %
+    \else
+      %
+      % If we must, put the page number on a line of its own, and fill out
+      % this line with blank space.  (The \hfil is overwhelmed with the
+      % fill leaders glue in \indexdotfill if the page number does fit.)
+      \hfil\penalty50
+      \null\nobreak\indexdotfill % Have leaders before the page number.
+      %
+      % The `\ ' here is removed by the implicit \unskip that TeX does as
+      % part of (the primitive) \par.  Without it, a spurious underfull
+      % \hbox ensues.
+      \ifpdf
+	\pdfgettoks#1.%
+	\ \the\toksA
+      \else
+	\ #1%
+      \fi
+    \fi
+    \par
+  \endgroup
+}
+
+% Like plain.tex's \dotfill, except uses up at least 1 em.
+\def\indexdotfill{\cleaders
+  \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill}
+
+\def\primary #1{\line{#1\hfil}}
+
+\newskip\secondaryindent \secondaryindent=0.5cm
+\def\secondary#1#2{{%
+  \parfillskip=0in
+  \parskip=0in
+  \hangindent=1in
+  \hangafter=1
+  \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
+  \ifpdf
+    \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
+  \else
+    #2
+  \fi
+  \par
+}}
+
+% Define two-column mode, which we use to typeset indexes.
+% Adapted from the TeXbook, page 416, which is to say,
+% the manmac.tex format used to print the TeXbook itself.
+\catcode`\@=11
+
+\newbox\partialpage
+\newdimen\doublecolumnhsize
+
+\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
+  % Grab any single-column material above us.
+  \output = {%
+    %
+    % Here is a possibility not foreseen in manmac: if we accumulate a
+    % whole lot of material, we might end up calling this \output
+    % routine twice in a row (see the doublecol-lose test, which is
+    % essentially a couple of indexes with @setchapternewpage off).  In
+    % that case we just ship out what is in \partialpage with the normal
+    % output routine.  Generally, \partialpage will be empty when this
+    % runs and this will be a no-op.  See the indexspread.tex test case.
+    \ifvoid\partialpage \else
+      \onepageout{\pagecontents\partialpage}%
+    \fi
+    %
+    \global\setbox\partialpage = \vbox{%
+      % Unvbox the main output page.
+      \unvbox\PAGE
+      \kern-\topskip \kern\baselineskip
+    }%
+  }%
+  \eject % run that output routine to set \partialpage
+  %
+  % Use the double-column output routine for subsequent pages.
+  \output = {\doublecolumnout}%
+  %
+  % Change the page size parameters.  We could do this once outside this
+  % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
+  % format, but then we repeat the same computation.  Repeating a couple
+  % of assignments once per index is clearly meaningless for the
+  % execution time, so we may as well do it in one place.
+  %
+  % First we halve the line length, less a little for the gutter between
+  % the columns.  We compute the gutter based on the line length, so it
+  % changes automatically with the paper format.  The magic constant
+  % below is chosen so that the gutter has the same value (well, +-<1pt)
+  % as it did when we hard-coded it.
+  %
+  % We put the result in a separate register, \doublecolumhsize, so we
+  % can restore it in \pagesofar, after \hsize itself has (potentially)
+  % been clobbered.
+  %
+  \doublecolumnhsize = \hsize
+    \advance\doublecolumnhsize by -.04154\hsize
+    \divide\doublecolumnhsize by 2
+  \hsize = \doublecolumnhsize
+  %
+  % Double the \vsize as well.  (We don't need a separate register here,
+  % since nobody clobbers \vsize.)
+  \vsize = 2\vsize
+}
+
+% The double-column output routine for all double-column pages except
+% the last.
+%
+\def\doublecolumnout{%
+  \splittopskip=\topskip \splitmaxdepth=\maxdepth
+  % Get the available space for the double columns -- the normal
+  % (undoubled) page height minus any material left over from the
+  % previous page.
+  \dimen@ = \vsize
+  \divide\dimen@ by 2
+  \advance\dimen@ by -\ht\partialpage
+  %
+  % box0 will be the left-hand column, box2 the right.
+  \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
+  \onepageout\pagesofar
+  \unvbox255
+  \penalty\outputpenalty
+}
+%
+% Re-output the contents of the output page -- any previous material,
+% followed by the two boxes we just split, in box0 and box2.
+\def\pagesofar{%
+  \unvbox\partialpage
+  %
+  \hsize = \doublecolumnhsize
+  \wd0=\hsize \wd2=\hsize
+  \hbox to\pagewidth{\box0\hfil\box2}%
+}
+%
+% All done with double columns.
+\def\enddoublecolumns{%
+  % The following penalty ensures that the page builder is exercised
+  % _before_ we change the output routine.  This is necessary in the
+  % following situation:
+  %
+  % The last section of the index consists only of a single entry.
+  % Before this section, \pagetotal is less than \pagegoal, so no
+  % break occurs before the last section starts.  However, the last
+  % section, consisting of \initial and the single \entry, does not
+  % fit on the page and has to be broken off.  Without the following
+  % penalty the page builder will not be exercised until \eject
+  % below, and by that time we'll already have changed the output
+  % routine to the \balancecolumns version, so the next-to-last
+  % double-column page will be processed with \balancecolumns, which
+  % is wrong:  The two columns will go to the main vertical list, with
+  % the broken-off section in the recent contributions.  As soon as
+  % the output routine finishes, TeX starts reconsidering the page
+  % break.  The two columns and the broken-off section both fit on the
+  % page, because the two columns now take up only half of the page
+  % goal.  When TeX sees \eject from below which follows the final
+  % section, it invokes the new output routine that we've set after
+  % \balancecolumns below; \onepageout will try to fit the two columns
+  % and the final section into the vbox of \pageheight (see
+  % \pagebody), causing an overfull box.
+  %
+  % Note that glue won't work here, because glue does not exercise the
+  % page builder, unlike penalties (see The TeXbook, pp. 280-281).
+  \penalty0
+  %
+  \output = {%
+    % Split the last of the double-column material.  Leave it on the
+    % current page, no automatic page break.
+    \balancecolumns
+    %
+    % If we end up splitting too much material for the current page,
+    % though, there will be another page break right after this \output
+    % invocation ends.  Having called \balancecolumns once, we do not
+    % want to call it again.  Therefore, reset \output to its normal
+    % definition right away.  (We hope \balancecolumns will never be
+    % called on to balance too much material, but if it is, this makes
+    % the output somewhat more palatable.)
+    \global\output = {\onepageout{\pagecontents\PAGE}}%
+  }%
+  \eject
+  \endgroup % started in \begindoublecolumns
+  %
+  % \pagegoal was set to the doubled \vsize above, since we restarted
+  % the current page.  We're now back to normal single-column
+  % typesetting, so reset \pagegoal to the normal \vsize (after the
+  % \endgroup where \vsize got restored).
+  \pagegoal = \vsize
+}
+%
+% Called at the end of the double column material.
+\def\balancecolumns{%
+  \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
+  \dimen@ = \ht0
+  \advance\dimen@ by \topskip
+  \advance\dimen@ by-\baselineskip
+  \divide\dimen@ by 2 % target to split to
+  %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
+  \splittopskip = \topskip
+  % Loop until we get a decent breakpoint.
+  {%
+    \vbadness = 10000
+    \loop
+      \global\setbox3 = \copy0
+      \global\setbox1 = \vsplit3 to \dimen@
+    \ifdim\ht3>\dimen@
+      \global\advance\dimen@ by 1pt
+    \repeat
+  }%
+  %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
+  \setbox0=\vbox to\dimen@{\unvbox1}%
+  \setbox2=\vbox to\dimen@{\unvbox3}%
+  %
+  \pagesofar
+}
+\catcode`\@ = \other
+
+
+\message{sectioning,}
+% Chapters, sections, etc.
+
+% Let's start with @part.
+\outer\parseargdef\part{\partzzz{#1}}
+\def\partzzz#1{%
+  \chapoddpage
+  \null
+  \vskip.3\vsize  % move it down on the page a bit
+  \begingroup
+    \noindent \titlefonts\rmisbold #1\par % the text
+    \let\lastnode=\empty      % no node to associate with
+    \writetocentry{part}{#1}{}% but put it in the toc
+    \headingsoff              % no headline or footline on the part page
+    \chapoddpage
+  \endgroup
+}
+
+% \unnumberedno is an oxymoron.  But we count the unnumbered
+% sections so that we can refer to them unambiguously in the pdf
+% outlines by their "section number".  We avoid collisions with chapter
+% numbers by starting them at 10000.  (If a document ever has 10000
+% chapters, we're in trouble anyway, I'm sure.)
+\newcount\unnumberedno \unnumberedno = 10000
+\newcount\chapno
+\newcount\secno        \secno=0
+\newcount\subsecno     \subsecno=0
+\newcount\subsubsecno  \subsubsecno=0
+
+% This counter is funny since it counts through charcodes of letters A, B, ...
+\newcount\appendixno  \appendixno = `\@
+%
+% \def\appendixletter{\char\the\appendixno}
+% We do the following ugly conditional instead of the above simple
+% construct for the sake of pdftex, which needs the actual
+% letter in the expansion, not just typeset.
+%
+\def\appendixletter{%
+  \ifnum\appendixno=`A A%
+  \else\ifnum\appendixno=`B B%
+  \else\ifnum\appendixno=`C C%
+  \else\ifnum\appendixno=`D D%
+  \else\ifnum\appendixno=`E E%
+  \else\ifnum\appendixno=`F F%
+  \else\ifnum\appendixno=`G G%
+  \else\ifnum\appendixno=`H H%
+  \else\ifnum\appendixno=`I I%
+  \else\ifnum\appendixno=`J J%
+  \else\ifnum\appendixno=`K K%
+  \else\ifnum\appendixno=`L L%
+  \else\ifnum\appendixno=`M M%
+  \else\ifnum\appendixno=`N N%
+  \else\ifnum\appendixno=`O O%
+  \else\ifnum\appendixno=`P P%
+  \else\ifnum\appendixno=`Q Q%
+  \else\ifnum\appendixno=`R R%
+  \else\ifnum\appendixno=`S S%
+  \else\ifnum\appendixno=`T T%
+  \else\ifnum\appendixno=`U U%
+  \else\ifnum\appendixno=`V V%
+  \else\ifnum\appendixno=`W W%
+  \else\ifnum\appendixno=`X X%
+  \else\ifnum\appendixno=`Y Y%
+  \else\ifnum\appendixno=`Z Z%
+  % The \the is necessary, despite appearances, because \appendixletter is
+  % expanded while writing the .toc file.  \char\appendixno is not
+  % expandable, thus it is written literally, thus all appendixes come out
+  % with the same letter (or @) in the toc without it.
+  \else\char\the\appendixno
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
+
+% Each @chapter defines these (using marks) as the number+name, number
+% and name of the chapter.  Page headings and footings can use
+% these.  @section does likewise.
+\def\thischapter{}
+\def\thischapternum{}
+\def\thischaptername{}
+\def\thissection{}
+\def\thissectionnum{}
+\def\thissectionname{}
+
+\newcount\absseclevel % used to calculate proper heading level
+\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
+
+% @raisesections: treat @section as chapter, @subsection as section, etc.
+\def\raisesections{\global\advance\secbase by -1}
+\let\up=\raisesections % original BFox name
+
+% @lowersections: treat @chapter as section, @section as subsection, etc.
+\def\lowersections{\global\advance\secbase by 1}
+\let\down=\lowersections % original BFox name
+
+% we only have subsub.
+\chardef\maxseclevel = 3
+%
+% A numbered section within an unnumbered changes to unnumbered too.
+% To achieve this, remember the "biggest" unnum. sec. we are currently in:
+\chardef\unnlevel = \maxseclevel
+%
+% Trace whether the current chapter is an appendix or not:
+% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
+\def\chapheadtype{N}
+
+% Choose a heading macro
+% #1 is heading type
+% #2 is heading level
+% #3 is text for heading
+\def\genhead#1#2#3{%
+  % Compute the abs. sec. level:
+  \absseclevel=#2
+  \advance\absseclevel by \secbase
+  % Make sure \absseclevel doesn't fall outside the range:
+  \ifnum \absseclevel < 0
+    \absseclevel = 0
+  \else
+    \ifnum \absseclevel > 3
+      \absseclevel = 3
+    \fi
+  \fi
+  % The heading type:
+  \def\headtype{#1}%
+  \if \headtype U%
+    \ifnum \absseclevel < \unnlevel
+      \chardef\unnlevel = \absseclevel
+    \fi
+  \else
+    % Check for appendix sections:
+    \ifnum \absseclevel = 0
+      \edef\chapheadtype{\headtype}%
+    \else
+      \if \headtype A\if \chapheadtype N%
+	\errmessage{@appendix... within a non-appendix chapter}%
+      \fi\fi
+    \fi
+    % Check for numbered within unnumbered:
+    \ifnum \absseclevel > \unnlevel
+      \def\headtype{U}%
+    \else
+      \chardef\unnlevel = 3
+    \fi
+  \fi
+  % Now print the heading:
+  \if \headtype U%
+    \ifcase\absseclevel
+	\unnumberedzzz{#3}%
+    \or \unnumberedseczzz{#3}%
+    \or \unnumberedsubseczzz{#3}%
+    \or \unnumberedsubsubseczzz{#3}%
+    \fi
+  \else
+    \if \headtype A%
+      \ifcase\absseclevel
+	  \appendixzzz{#3}%
+      \or \appendixsectionzzz{#3}%
+      \or \appendixsubseczzz{#3}%
+      \or \appendixsubsubseczzz{#3}%
+      \fi
+    \else
+      \ifcase\absseclevel
+	  \chapterzzz{#3}%
+      \or \seczzz{#3}%
+      \or \numberedsubseczzz{#3}%
+      \or \numberedsubsubseczzz{#3}%
+      \fi
+    \fi
+  \fi
+  \suppressfirstparagraphindent
+}
+
+% an interface:
+\def\numhead{\genhead N}
+\def\apphead{\genhead A}
+\def\unnmhead{\genhead U}
+
+% @chapter, @appendix, @unnumbered.  Increment top-level counter, reset
+% all lower-level sectioning counters to zero.
+%
+% Also set \chaplevelprefix, which we prepend to @float sequence numbers
+% (e.g., figures), q.v.  By default (before any chapter), that is empty.
+\let\chaplevelprefix = \empty
+%
+\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
+\def\chapterzzz#1{%
+  % section resetting is \global in case the chapter is in a group, such
+  % as an @include file.
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\chapno by 1
+  %
+  % Used for \float.
+  \gdef\chaplevelprefix{\the\chapno.}%
+  \resetallfloatnos
+  %
+  % \putwordChapter can contain complex things in translations.
+  \toks0=\expandafter{\putwordChapter}%
+  \message{\the\toks0 \space \the\chapno}%
+  %
+  % Write the actual heading.
+  \chapmacro{#1}{Ynumbered}{\the\chapno}%
+  %
+  % So @section and the like are numbered underneath this chapter.
+  \global\let\section = \numberedsec
+  \global\let\subsection = \numberedsubsec
+  \global\let\subsubsection = \numberedsubsubsec
+}
+
+\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz
+%
+\def\appendixzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\appendixno by 1
+  \gdef\chaplevelprefix{\appendixletter.}%
+  \resetallfloatnos
+  %
+  % \putwordAppendix can contain complex things in translations.
+  \toks0=\expandafter{\putwordAppendix}%
+  \message{\the\toks0 \space \appendixletter}%
+  %
+  \chapmacro{#1}{Yappendix}{\appendixletter}%
+  %
+  \global\let\section = \appendixsec
+  \global\let\subsection = \appendixsubsec
+  \global\let\subsubsection = \appendixsubsubsec
+}
+
+% normally unnmhead0 calls unnumberedzzz:
+\outer\parseargdef\unnumbered{\unnmhead0{#1}}
+\def\unnumberedzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\unnumberedno by 1
+  %
+  % Since an unnumbered has no number, no prefix for figures.
+  \global\let\chaplevelprefix = \empty
+  \resetallfloatnos
+  %
+  % This used to be simply \message{#1}, but TeX fully expands the
+  % argument to \message.  Therefore, if #1 contained @-commands, TeX
+  % expanded them.  For example, in `@unnumbered The @cite{Book}', TeX
+  % expanded @cite (which turns out to cause errors because \cite is meant
+  % to be executed, not expanded).
+  %
+  % Anyway, we don't want the fully-expanded definition of @cite to appear
+  % as a result of the \message, we just want `@cite' itself.  We use
+  % \the<toks register> to achieve this: TeX expands \the<toks> only once,
+  % simply yielding the contents of <toks register>.  (We also do this for
+  % the toc entries.)
+  \toks0 = {#1}%
+  \message{(\the\toks0)}%
+  %
+  \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
+  %
+  \global\let\section = \unnumberedsec
+  \global\let\subsection = \unnumberedsubsec
+  \global\let\subsubsection = \unnumberedsubsubsec
+}
+
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\parseargdef\centerchap{%
+  % Well, we could do the following in a group, but that would break
+  % an assumption that \chapmacro is called at the outermost level.
+  % Thus we are safer this way:		--kasal, 24feb04
+  \let\centerparametersmaybe = \centerparameters
+  \unnmhead0{#1}%
+  \let\centerparametersmaybe = \relax
+}
+
+% @top is like @unnumbered.
+\let\top\unnumbered
+
+% Sections.
+% 
+\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
+\def\seczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
+}
+
+% normally calls appendixsectionzzz:
+\outer\parseargdef\appendixsection{\apphead1{#1}}
+\def\appendixsectionzzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
+}
+\let\appendixsec\appendixsection
+
+% normally calls unnumberedseczzz:
+\outer\parseargdef\unnumberedsec{\unnmhead1{#1}}
+\def\unnumberedseczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
+}
+
+% Subsections.
+% 
+% normally calls numberedsubseczzz:
+\outer\parseargdef\numberedsubsec{\numhead2{#1}}
+\def\numberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
+}
+
+% normally calls appendixsubseczzz:
+\outer\parseargdef\appendixsubsec{\apphead2{#1}}
+\def\appendixsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno}%
+}
+
+% normally calls unnumberedsubseczzz:
+\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}}
+\def\unnumberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno}%
+}
+
+% Subsubsections.
+% 
+% normally numberedsubsubseczzz:
+\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
+\def\numberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynumbered}%
+                 {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% normally appendixsubsubseczzz:
+\outer\parseargdef\appendixsubsubsec{\apphead3{#1}}
+\def\appendixsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% normally unnumberedsubsubseczzz:
+\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}}
+\def\unnumberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% These macros control what the section commands do, according
+% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
+% Define them by default for a numbered chapter.
+\let\section = \numberedsec
+\let\subsection = \numberedsubsec
+\let\subsubsection = \numberedsubsubsec
+
+% Define @majorheading, @heading and @subheading
+
+\def\majorheading{%
+  {\advance\chapheadingskip by 10pt \chapbreak }%
+  \parsearg\chapheadingzzz
+}
+
+\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
+\def\chapheadingzzz#1{%
+  \vbox{\chapfonts \raggedtitlesettings #1\par}%
+  \nobreak\bigskip \nobreak
+  \suppressfirstparagraphindent
+}
+
+% @heading, @subheading, @subsubheading.
+\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+
+% These macros generate a chapter, section, etc. heading only
+% (including whitespace, linebreaking, etc. around it),
+% given all the information in convenient, parsed form.
+
+% Args are the skip and penalty (usually negative)
+\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
+
+% Parameter controlling skip before chapter headings (if needed)
+\newskip\chapheadingskip
+
+% Define plain chapter starts, and page on/off switching for it.
+\def\chapbreak{\dobreak \chapheadingskip {-4000}}
+\def\chappager{\par\vfill\supereject}
+% Because \domark is called before \chapoddpage, the filler page will
+% get the headings for the next chapter, which is wrong.  But we don't
+% care -- we just disable all headings on the filler page.
+\def\chapoddpage{%
+  \chappager
+  \ifodd\pageno \else
+    \begingroup
+      \headingsoff
+      \null
+      \chappager
+    \endgroup
+  \fi
+}
+
+\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
+
+\def\CHAPPAGoff{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chapbreak
+\global\let\pagealignmacro=\chappager}
+
+\def\CHAPPAGon{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chappager
+\global\let\pagealignmacro=\chappager
+\global\def\HEADINGSon{\HEADINGSsingle}}
+
+\def\CHAPPAGodd{%
+\global\let\contentsalignmacro = \chapoddpage
+\global\let\pchapsepmacro=\chapoddpage
+\global\let\pagealignmacro=\chapoddpage
+\global\def\HEADINGSon{\HEADINGSdouble}}
+
+\CHAPPAGon
+
+% Chapter opening.
+%
+% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
+% Yappendix, Yomitfromtoc), #3 the chapter number.
+%
+% To test against our argument.
+\def\Ynothingkeyword{Ynothing}
+\def\Yomitfromtockeyword{Yomitfromtoc}
+\def\Yappendixkeyword{Yappendix}
+%
+\def\chapmacro#1#2#3{%
+  % Insert the first mark before the heading break (see notes for \domark).
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}%
+                        \gdef\thissection{}}%
+  %
+  \def\temptype{#2}%
+  \ifx\temptype\Ynothingkeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{\thischaptername}}%
+  \else\ifx\temptype\Yomitfromtockeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{}}%
+  \else\ifx\temptype\Yappendixkeyword
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\appendixletter}%
+      % \noexpand\putwordAppendix avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordAppendix{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \else
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\the\chapno}%
+      % \noexpand\putwordChapter avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordChapter{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \fi\fi\fi
+  %
+  % Output the mark.  Pass it through \safewhatsit, to take care of
+  % the preceding space.
+  \safewhatsit\domark
+  %
+  % Insert the chapter heading break.
+  \pchapsepmacro
+  %
+  % Now the second mark, after the heading break.  No break points
+  % between here and the heading.
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \domark
+  %
+  {%
+    \chapfonts \rmisbold
+    %
+    % Have to define \lastsection before calling \donoderef, because the
+    % xref code eventually uses it.  On the other hand, it has to be called
+    % after \pchapsepmacro, or the headline will change too soon.
+    \gdef\lastsection{#1}%
+    %
+    % Only insert the separating space if we have a chapter/appendix
+    % number, and don't print the unnumbered ``number''.
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unnchap}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
+      \def\toctype{omit}%
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
+      \def\toctype{app}%
+    \else
+      \setbox0 = \hbox{#3\enspace}%
+      \def\toctype{numchap}%
+    \fi\fi\fi
+    %
+    % Write the toc entry for this chapter.  Must come before the
+    % \donoderef, because we include the current node name in the toc
+    % entry, and \donoderef resets it to empty.
+    \writetocentry{\toctype}{#1}{#3}%
+    %
+    % For pdftex, we have to write out the node definition (aka, make
+    % the pdfdest) after any page break, but before the actual text has
+    % been typeset.  If the destination for the pdf outline is after the
+    % text, then jumping from the outline may wind up with the text not
+    % being visible, for instance under high magnification.
+    \donoderef{#2}%
+    %
+    % Typeset the actual heading.
+    \nobreak % Avoid page breaks at the interline glue.
+    \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe
+          \unhbox0 #1\par}%
+  }%
+  \nobreak\bigskip % no page break after a chapter title
+  \nobreak
+}
+
+% @centerchap -- centered and unnumbered.
+\let\centerparametersmaybe = \relax
+\def\centerparameters{%
+  \advance\rightskip by 3\rightskip
+  \leftskip = \rightskip
+  \parfillskip = 0pt
+}
+
+
+% I don't think this chapter style is supported any more, so I'm not
+% updating it with the new noderef stuff.  We'll see.  --karl, 11aug03.
+%
+\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
+%
+\def\unnchfopen #1{%
+  \chapoddpage
+  \vbox{\chapfonts \raggedtitlesettings #1\par}%
+  \nobreak\bigskip\nobreak
+}
+\def\chfopen #1#2{\chapoddpage {\chapfonts
+\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
+\par\penalty 5000 %
+}
+\def\centerchfopen #1{%
+  \chapoddpage
+  \vbox{\chapfonts \raggedtitlesettings \hfill #1\hfill}%
+  \nobreak\bigskip \nobreak
+}
+\def\CHAPFopen{%
+  \global\let\chapmacro=\chfopen
+  \global\let\centerchapmacro=\centerchfopen}
+
+
+% Section titles.  These macros combine the section number parts and
+% call the generic \sectionheading to do the printing.
+%
+\newskip\secheadingskip
+\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
+
+% Subsection titles.
+\newskip\subsecheadingskip
+\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
+
+% Subsubsection titles.
+\def\subsubsecheadingskip{\subsecheadingskip}
+\def\subsubsecheadingbreak{\subsecheadingbreak}
+
+
+% Print any size, any type, section title.
+%
+% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
+% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
+% section number.
+%
+\def\seckeyword{sec}
+%
+\def\sectionheading#1#2#3#4{%
+  {%
+    \checkenv{}% should not be in an environment.
+    %
+    % Switch to the right set of fonts.
+    \csname #2fonts\endcsname \rmisbold
+    %
+    \def\sectionlevel{#2}%
+    \def\temptype{#3}%
+    %
+    % Insert first mark before the heading break (see notes for \domark).
+    \let\prevsectiondefs=\lastsectiondefs
+    \ifx\temptype\Ynothingkeyword
+      \ifx\sectionlevel\seckeyword
+        \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}%
+                              \gdef\thissection{\thissectionname}}%
+      \fi
+    \else\ifx\temptype\Yomitfromtockeyword
+      % Don't redefine \thissection.
+    \else\ifx\temptype\Yappendixkeyword
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \else
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \fi\fi\fi
+    %
+    % Go into vertical mode.  Usually we'll already be there, but we
+    % don't want the following whatsit to end up in a preceding paragraph
+    % if the document didn't happen to have a blank line.
+    \par
+    %
+    % Output the mark.  Pass it through \safewhatsit, to take care of
+    % the preceding space.
+    \safewhatsit\domark
+    %
+    % Insert space above the heading.
+    \csname #2headingbreak\endcsname
+    %
+    % Now the second mark, after the heading break.  No break points
+    % between here and the heading.
+    \let\prevsectiondefs=\lastsectiondefs
+    \domark
+    %
+    % Only insert the space after the number if we have a section number.
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unn}%
+      \gdef\lastsection{#1}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      % for @headings -- no section number, don't include in toc,
+      % and don't redefine \lastsection.
+      \setbox0 = \hbox{}%
+      \def\toctype{omit}%
+      \let\sectionlevel=\empty
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{app}%
+      \gdef\lastsection{#1}%
+    \else
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{num}%
+      \gdef\lastsection{#1}%
+    \fi\fi\fi
+    %
+    % Write the toc entry (before \donoderef).  See comments in \chapmacro.
+    \writetocentry{\toctype\sectionlevel}{#1}{#4}%
+    %
+    % Write the node reference (= pdf destination for pdftex).
+    % Again, see comments in \chapmacro.
+    \donoderef{#3}%
+    %
+    % Interline glue will be inserted when the vbox is completed.
+    % That glue will be a valid breakpoint for the page, since it'll be
+    % preceded by a whatsit (usually from the \donoderef, or from the
+    % \writetocentry if there was no node).  We don't want to allow that
+    % break, since then the whatsits could end up on page n while the
+    % section is on page n+1, thus toc/etc. are wrong.  Debian bug 276000.
+    \nobreak
+    %
+    % Output the actual section heading.
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
+          \hangindent=\wd0  % zero if no section number
+          \unhbox0 #1}%
+  }%
+  % Add extra space after the heading -- half of whatever came above it.
+  % Don't allow stretch, though.
+  \kern .5 \csname #2headingskip\endcsname
+  %
+  % Do not let the kern be a potential breakpoint, as it would be if it
+  % was followed by glue.
+  \nobreak
+  %
+  % We'll almost certainly start a paragraph next, so don't let that
+  % glue accumulate.  (Not a breakpoint because it's preceded by a
+  % discardable item.)  However, when a paragraph is not started next
+  % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out
+  % or the negative glue will cause weirdly wrong output, typically
+  % obscuring the section heading with something else.
+  \vskip-\parskip
+  %
+  % This is so the last item on the main vertical list is a known
+  % \penalty > 10000, so \startdefun, etc., can recognize the situation
+  % and do the needful.
+  \penalty 10001
+}
+
+
+\message{toc,}
+% Table of contents.
+\newwrite\tocfile
+
+% Write an entry to the toc file, opening it if necessary.
+% Called from @chapter, etc.
+%
+% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
+% We append the current node name (if any) and page number as additional
+% arguments for the \{chap,sec,...}entry macros which will eventually
+% read this.  The node name is used in the pdf outlines as the
+% destination to jump to.
+%
+% We open the .toc file for writing here instead of at @setfilename (or
+% any other fixed time) so that @contents can be anywhere in the document.
+% But if #1 is `omit', then we don't do anything.  This is used for the
+% table of contents chapter openings themselves.
+%
+\newif\iftocfileopened
+\def\omitkeyword{omit}%
+%
+\def\writetocentry#1#2#3{%
+  \edef\writetoctype{#1}%
+  \ifx\writetoctype\omitkeyword \else
+    \iftocfileopened\else
+      \immediate\openout\tocfile = \jobname.toc
+      \global\tocfileopenedtrue
+    \fi
+    %
+    \iflinks
+      {\atdummies
+       \edef\temp{%
+         \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
+       \temp
+      }%
+    \fi
+  \fi
+  %
+  % Tell \shipout to create a pdf destination on each page, if we're
+  % writing pdf.  These are used in the table of contents.  We can't
+  % just write one on every page because the title pages are numbered
+  % 1 and 2 (the page numbers aren't printed), and so are the first
+  % two pages of the document.  Thus, we'd have two destinations named
+  % `1', and two named `2'.
+  \ifpdf \global\pdfmakepagedesttrue \fi
+}
+
+
+% These characters do not print properly in the Computer Modern roman
+% fonts, so we must take special care.  This is more or less redundant
+% with the Texinfo input format setup at the end of this file.
+%
+\def\activecatcodes{%
+  \catcode`\"=\active
+  \catcode`\$=\active
+  \catcode`\<=\active
+  \catcode`\>=\active
+  \catcode`\\=\active
+  \catcode`\^=\active
+  \catcode`\_=\active
+  \catcode`\|=\active
+  \catcode`\~=\active
+}
+
+
+% Read the toc file, which is essentially Texinfo input.
+\def\readtocfile{%
+  \setupdatafile
+  \activecatcodes
+  \input \tocreadfilename
+}
+
+\newskip\contentsrightmargin \contentsrightmargin=1in
+\newcount\savepageno
+\newcount\lastnegativepageno \lastnegativepageno = -1
+
+% Prepare to read what we've written to \tocfile.
+%
+\def\startcontents#1{%
+  % If @setchapternewpage on, and @headings double, the contents should
+  % start on an odd page, unlike chapters.  Thus, we maintain
+  % \contentsalignmacro in parallel with \pagealignmacro.
+  % From: Torbjorn Granlund <tege@matematik.su.se>
+  \contentsalignmacro
+  \immediate\closeout\tocfile
+  %
+  % Don't need to put `Contents' or `Short Contents' in the headline.
+  % It is abundantly clear what they are.
+  \chapmacro{#1}{Yomitfromtoc}{}%
+  %
+  \savepageno = \pageno
+  \begingroup                  % Set up to handle contents files properly.
+    \raggedbottom              % Worry more about breakpoints than the bottom.
+    \advance\hsize by -\contentsrightmargin % Don't use the full line length.
+    %
+    % Roman numerals for page numbers.
+    \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
+}
+
+% redefined for the two-volume lispref.  We always output on
+% \jobname.toc even if this is redefined.
+%
+\def\tocreadfilename{\jobname.toc}
+
+% Normal (long) toc.
+%
+\def\contents{%
+  \startcontents{\putwordTOC}%
+    \openin 1 \tocreadfilename\space
+    \ifeof 1 \else
+      \readtocfile
+    \fi
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+    \ifeof 1 \else
+      \pdfmakeoutlines
+    \fi
+    \closein 1
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
+}
+
+% And just the chapters.
+\def\summarycontents{%
+  \startcontents{\putwordShortTOC}%
+    %
+    \let\partentry = \shortpartentry
+    \let\numchapentry = \shortchapentry
+    \let\appentry = \shortchapentry
+    \let\unnchapentry = \shortunnchapentry
+    % We want a true roman here for the page numbers.
+    \secfonts
+    \let\rm=\shortcontrm \let\bf=\shortcontbf
+    \let\sl=\shortcontsl \let\tt=\shortconttt
+    \rm
+    \hyphenpenalty = 10000
+    \advance\baselineskip by 1pt % Open it up a little.
+    \def\numsecentry##1##2##3##4{}
+    \let\appsecentry = \numsecentry
+    \let\unnsecentry = \numsecentry
+    \let\numsubsecentry = \numsecentry
+    \let\appsubsecentry = \numsecentry
+    \let\unnsubsecentry = \numsecentry
+    \let\numsubsubsecentry = \numsecentry
+    \let\appsubsubsecentry = \numsecentry
+    \let\unnsubsubsecentry = \numsecentry
+    \openin 1 \tocreadfilename\space
+    \ifeof 1 \else
+      \readtocfile
+    \fi
+    \closein 1
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
+}
+\let\shortcontents = \summarycontents
+
+% Typeset the label for a chapter or appendix for the short contents.
+% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
+%
+\def\shortchaplabel#1{%
+  % This space should be enough, since a single number is .5em, and the
+  % widest letter (M) is 1em, at least in the Computer Modern fonts.
+  % But use \hss just in case.
+  % (This space doesn't include the extra space that gets added after
+  % the label; that gets put in by \shortchapentry above.)
+  %
+  % We'd like to right-justify chapter numbers, but that looks strange
+  % with appendix letters.  And right-justifying numbers and
+  % left-justifying letters looks strange when there is less than 10
+  % chapters.  Have to read the whole toc once to know how many chapters
+  % there are before deciding ...
+  \hbox to 1em{#1\hss}%
+}
+
+% These macros generate individual entries in the table of contents.
+% The first argument is the chapter or section name.
+% The last argument is the page number.
+% The arguments in between are the chapter number, section number, ...
+
+% Parts, in the main contents.  Replace the part number, which doesn't
+% exist, with an empty box.  Let's hope all the numbers have the same width.
+% Also ignore the page number, which is conventionally not printed.
+\def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}}
+\def\partentry#1#2#3#4{\dochapentry{\numeralbox\labelspace#1}{}}
+%
+% Parts, in the short toc.
+\def\shortpartentry#1#2#3#4{%
+  \penalty-300
+  \vskip.5\baselineskip plus.15\baselineskip minus.1\baselineskip
+  \shortchapentry{{\bf #1}}{\numeralbox}{}{}%
+}
+
+% Chapters, in the main contents.
+\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
+%
+% Chapters, in the short toc.
+% See comments in \dochapentry re vbox and related settings.
+\def\shortchapentry#1#2#3#4{%
+  \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
+}
+
+% Appendices, in the main contents.
+% Need the word Appendix, and a fixed-size box.
+%
+\def\appendixbox#1{%
+  % We use M since it's probably the widest letter.
+  \setbox0 = \hbox{\putwordAppendix{} M}%
+  \hbox to \wd0{\putwordAppendix{} #1\hss}}
+%
+\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
+
+% Unnumbered chapters.
+\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
+\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
+
+% Sections.
+\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
+\let\appsecentry=\numsecentry
+\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
+
+% Subsections.
+\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsecentry=\numsubsecentry
+\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
+
+% And subsubsections.
+\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsubsecentry=\numsubsubsecentry
+\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
+
+% This parameter controls the indentation of the various levels.
+% Same as \defaultparindent.
+\newdimen\tocindent \tocindent = 15pt
+
+% Now for the actual typesetting. In all these, #1 is the text and #2 is the
+% page number.
+%
+% If the toc has to be broken over pages, we want it to be at chapters
+% if at all possible; hence the \penalty.
+\def\dochapentry#1#2{%
+   \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
+   \begingroup
+     \chapentryfonts
+     \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+   \endgroup
+   \nobreak\vskip .25\baselineskip plus.1\baselineskip
+}
+
+\def\dosecentry#1#2{\begingroup
+  \secentryfonts \leftskip=\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsecentry#1#2{\begingroup
+  \subsecentryfonts \leftskip=2\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsubsecentry#1#2{\begingroup
+  \subsubsecentryfonts \leftskip=3\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+% We use the same \entry macro as for the index entries.
+\let\tocentry = \entry
+
+% Space between chapter (or whatever) number and the title.
+\def\labelspace{\hskip1em \relax}
+
+\def\dopageno#1{{\rm #1}}
+\def\doshortpageno#1{{\rm #1}}
+
+\def\chapentryfonts{\secfonts \rm}
+\def\secentryfonts{\textfonts}
+\def\subsecentryfonts{\textfonts}
+\def\subsubsecentryfonts{\textfonts}
+
+
+\message{environments,}
+% @foo ... @end foo.
+
+% @tex ... @end tex    escapes into raw TeX temporarily.
+% One exception: @ is still an escape character, so that @end tex works.
+% But \@ or @@ will get a plain @ character.
+
+\envdef\tex{%
+  \setupmarkupstyle{tex}%
+  \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
+  \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
+  \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
+  \catcode `\%=14
+  \catcode `\+=\other
+  \catcode `\"=\other
+  \catcode `\|=\other
+  \catcode `\<=\other
+  \catcode `\>=\other
+  \catcode`\`=\other
+  \catcode`\'=\other
+  \escapechar=`\\
+  %
+  % ' is active in math mode (mathcode"8000).  So reset it, and all our
+  % other math active characters (just in case), to plain's definitions.
+  \mathactive
+  %
+  \let\b=\ptexb
+  \let\bullet=\ptexbullet
+  \let\c=\ptexc
+  \let\,=\ptexcomma
+  \let\.=\ptexdot
+  \let\dots=\ptexdots
+  \let\equiv=\ptexequiv
+  \let\!=\ptexexclam
+  \let\i=\ptexi
+  \let\indent=\ptexindent
+  \let\noindent=\ptexnoindent
+  \let\{=\ptexlbrace
+  \let\+=\tabalign
+  \let\}=\ptexrbrace
+  \let\/=\ptexslash
+  \let\*=\ptexstar
+  \let\t=\ptext
+  \expandafter \let\csname top\endcsname=\ptextop  % outer
+  \let\frenchspacing=\plainfrenchspacing
+  %
+  \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
+  \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
+  \def\@{@}%
+}
+% There is no need to define \Etex.
+
+% Define @lisp ... @end lisp.
+% @lisp environment forms a group so it can rebind things,
+% including the definition of @end lisp (which normally is erroneous).
+
+% Amount to narrow the margins by for @lisp.
+\newskip\lispnarrowing \lispnarrowing=0.4in
+
+% This is the definition that ^^M gets inside @lisp, @example, and other
+% such environments.  \null is better than a space, since it doesn't
+% have any width.
+\def\lisppar{\null\endgraf}
+
+% This space is always present above and below environments.
+\newskip\envskipamount \envskipamount = 0pt
+
+% Make spacing and below environment symmetrical.  We use \parskip here
+% to help in doing that, since in @example-like environments \parskip
+% is reset to zero; thus the \afterenvbreak inserts no space -- but the
+% start of the next paragraph will insert \parskip.
+%
+\def\aboveenvbreak{{%
+  % =10000 instead of <10000 because of a special case in \itemzzz and
+  % \sectionheading, q.v.
+  \ifnum \lastpenalty=10000 \else
+    \advance\envskipamount by \parskip
+    \endgraf
+    \ifdim\lastskip<\envskipamount
+      \removelastskip
+      % it's not a good place to break if the last penalty was \nobreak
+      % or better ...
+      \ifnum\lastpenalty<10000 \penalty-50 \fi
+      \vskip\envskipamount
+    \fi
+  \fi
+}}
+
+\let\afterenvbreak = \aboveenvbreak
+
+% \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins; it will
+% also clear it, so that its embedded environments do the narrowing again.
+\let\nonarrowing=\relax
+
+% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
+% environment contents.
+\font\circle=lcircle10
+\newdimen\circthick
+\newdimen\cartouter\newdimen\cartinner
+\newskip\normbskip\newskip\normpskip\newskip\normlskip
+\circthick=\fontdimen8\circle
+%
+\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
+\def\ctr{{\hskip 6pt\circle\char'010}}
+\def\cbl{{\circle\char'012\hskip -6pt}}
+\def\cbr{{\hskip 6pt\circle\char'011}}
+\def\carttop{\hbox to \cartouter{\hskip\lskip
+        \ctl\leaders\hrule height\circthick\hfil\ctr
+        \hskip\rskip}}
+\def\cartbot{\hbox to \cartouter{\hskip\lskip
+        \cbl\leaders\hrule height\circthick\hfil\cbr
+        \hskip\rskip}}
+%
+\newskip\lskip\newskip\rskip
+
+\envdef\cartouche{%
+  \ifhmode\par\fi  % can't be in the midst of a paragraph.
+  \startsavinginserts
+  \lskip=\leftskip \rskip=\rightskip
+  \leftskip=0pt\rightskip=0pt % we want these *outside*.
+  \cartinner=\hsize \advance\cartinner by-\lskip
+  \advance\cartinner by-\rskip
+  \cartouter=\hsize
+  \advance\cartouter by 18.4pt	% allow for 3pt kerns on either
+				% side, and for 6pt waste from
+				% each corner char, and rule thickness
+  \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+  % Flag to tell @lisp, etc., not to narrow margin.
+  \let\nonarrowing = t%
+  %
+  % If this cartouche directly follows a sectioning command, we need the
+  % \parskip glue (backspaced over by default) or the cartouche can
+  % collide with the section heading.
+  \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi
+  %
+  \vbox\bgroup
+      \baselineskip=0pt\parskip=0pt\lineskip=0pt
+      \carttop
+      \hbox\bgroup
+	  \hskip\lskip
+	  \vrule\kern3pt
+	  \vbox\bgroup
+	      \kern3pt
+	      \hsize=\cartinner
+	      \baselineskip=\normbskip
+	      \lineskip=\normlskip
+	      \parskip=\normpskip
+	      \vskip -\parskip
+	      \comment % For explanation, see the end of def\group.
+}
+\def\Ecartouche{%
+              \ifhmode\par\fi
+	      \kern3pt
+	  \egroup
+	  \kern3pt\vrule
+	  \hskip\rskip
+      \egroup
+      \cartbot
+  \egroup
+  \checkinserts
+}
+
+
+% This macro is called at the beginning of all the @example variants,
+% inside a group.
+\newdimen\nonfillparindent
+\def\nonfillstart{%
+  \aboveenvbreak
+  \hfuzz = 12pt % Don't be fussy
+  \sepspaces % Make spaces be word-separators rather than space tokens.
+  \let\par = \lisppar % don't ignore blank lines
+  \obeylines % each line of input is a line of output
+  \parskip = 0pt
+  % Turn off paragraph indentation but redefine \indent to emulate
+  % the normal \indent.
+  \nonfillparindent=\parindent
+  \parindent = 0pt
+  \let\indent\nonfillindent
+  %
+  \emergencystretch = 0pt % don't try to avoid overfull boxes
+  \ifx\nonarrowing\relax
+    \advance \leftskip by \lispnarrowing
+    \exdentamount=\lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+  \let\exdent=\nofillexdent
+}
+
+\begingroup
+\obeyspaces
+% We want to swallow spaces (but not other tokens) after the fake
+% @indent in our nonfill-environments, where spaces are normally
+% active and set to @tie, resulting in them not being ignored after
+% @indent.
+\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}%
+\gdef\nonfillindentcheck{%
+\ifx\temp %
+\expandafter\nonfillindentgobble%
+\else%
+\leavevmode\nonfillindentbox%
+\fi%
+}%
+\endgroup
+\def\nonfillindentgobble#1{\nonfillindent}
+\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}}
+
+% If you want all examples etc. small: @set dispenvsize small.
+% If you want even small examples the full size: @set dispenvsize nosmall.
+% This affects the following displayed environments:
+%    @example, @display, @format, @lisp
+%
+\def\smallword{small}
+\def\nosmallword{nosmall}
+\let\SETdispenvsize\relax
+\def\setnormaldispenv{%
+  \ifx\SETdispenvsize\smallword
+    % end paragraph for sake of leading, in case document has no blank
+    % line.  This is redundant with what happens in \aboveenvbreak, but
+    % we need to do it before changing the fonts, and it's inconvenient
+    % to change the fonts afterward.
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
+    \smallexamplefonts \rm
+  \fi
+}
+\def\setsmalldispenv{%
+  \ifx\SETdispenvsize\nosmallword
+  \else
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
+    \smallexamplefonts \rm
+  \fi
+}
+
+% We often define two environments, @foo and @smallfoo.
+% Let's do it in one command.  #1 is the env name, #2 the definition.
+\def\makedispenvdef#1#2{%
+  \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}%
+  \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}%
+  \expandafter\let\csname E#1\endcsname \afterenvbreak
+  \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
+}
+
+% Define two environment synonyms (#1 and #2) for an environment.
+\def\maketwodispenvdef#1#2#3{%
+  \makedispenvdef{#1}{#3}%
+  \makedispenvdef{#2}{#3}%
+}
+%
+% @lisp: indented, narrowed, typewriter font;
+% @example: same as @lisp.
+%
+% @smallexample and @smalllisp: use smaller fonts.
+% Originally contributed by Pavel@xerox.
+%
+\maketwodispenvdef{lisp}{example}{%
+  \nonfillstart
+  \tt\setupmarkupstyle{example}%
+  \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
+  \gobble % eat return
+}
+% @display/@smalldisplay: same as @lisp except keep current font.
+%
+\makedispenvdef{display}{%
+  \nonfillstart
+  \gobble
+}
+
+% @format/@smallformat: same as @display except don't narrow margins.
+%
+\makedispenvdef{format}{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \gobble
+}
+
+% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
+\envdef\flushleft{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \gobble
+}
+\let\Eflushleft = \afterenvbreak
+
+% @flushright.
+%
+\envdef\flushright{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \advance\leftskip by 0pt plus 1fill\relax
+  \gobble
+}
+\let\Eflushright = \afterenvbreak
+
+
+% @raggedright does more-or-less normal line breaking but no right
+% justification.  From plain.tex.
+\envdef\raggedright{%
+  \rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax
+}
+\let\Eraggedright\par
+
+\envdef\raggedleft{%
+  \parindent=0pt \leftskip0pt plus2em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedleft\par
+
+\envdef\raggedcenter{%
+  \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedcenter\par
+
+
+% @quotation does normal linebreaking (hence we can't use \nonfillstart)
+% and narrows the margins.  We keep \parskip nonzero in general, since
+% we're doing normal filling.  So, when using \aboveenvbreak and
+% \afterenvbreak, temporarily make \parskip 0.
+%
+\makedispenvdef{quotation}{\quotationstart}
+%
+\def\quotationstart{%
+  \indentedblockstart % same as \indentedblock, but increase right margin too.
+  \ifx\nonarrowing\relax
+    \advance\rightskip by \lispnarrowing
+  \fi
+  \parsearg\quotationlabel
+}
+
+% We have retained a nonzero parskip for the environment, since we're
+% doing normal filling.
+%
+\def\Equotation{%
+  \par
+  \ifx\quotationauthor\thisisundefined\else
+    % indent a bit.
+    \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
+  \fi
+  {\parskip=0pt \afterenvbreak}%
+}
+\def\Esmallquotation{\Equotation}
+
+% If we're given an argument, typeset it in bold with a colon after.
+\def\quotationlabel#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty \else
+    {\bf #1: }%
+  \fi
+}
+
+% @indentedblock is like @quotation, but indents only on the left and
+% has no optional argument.
+% 
+\makedispenvdef{indentedblock}{\indentedblockstart}
+%
+\def\indentedblockstart{%
+  {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
+  \parindent=0pt
+  %
+  % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+  \ifx\nonarrowing\relax
+    \advance\leftskip by \lispnarrowing
+    \exdentamount = \lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+}
+
+% Keep a nonzero parskip for the environment, since we're doing normal filling.
+%
+\def\Eindentedblock{%
+  \par
+  {\parskip=0pt \afterenvbreak}%
+}
+\def\Esmallindentedblock{\Eindentedblock}
+
+
+% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
+% If we want to allow any <char> as delimiter,
+% we need the curly braces so that makeinfo sees the @verb command, eg:
+% `@verbx...x' would look like the '@verbx' command.  --janneke@gnu.org
+%
+% [Knuth]: Donald Ervin Knuth, 1996.  The TeXbook.
+%
+% [Knuth] p.344; only we need to do the other characters Texinfo sets
+% active too.  Otherwise, they get lost as the first character on a
+% verbatim line.
+\def\dospecials{%
+  \do\ \do\\\do\{\do\}\do\$\do\&%
+  \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
+  \do\<\do\>\do\|\do\@\do+\do\"%
+  % Don't do the quotes -- if we do, @set txicodequoteundirected and
+  % @set txicodequotebacktick will not have effect on @verb and
+  % @verbatim, and ?` and !` ligatures won't get disabled.
+  %\do\`\do\'%
+}
+%
+% [Knuth] p. 380
+\def\uncatcodespecials{%
+  \def\do##1{\catcode`##1=\other}\dospecials}
+%
+% Setup for the @verb command.
+%
+% Eight spaces for a tab
+\begingroup
+  \catcode`\^^I=\active
+  \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
+\endgroup
+%
+\def\setupverb{%
+  \tt  % easiest (and conventionally used) font for verbatim
+  \def\par{\leavevmode\endgraf}%
+  \setupmarkupstyle{verb}%
+  \tabeightspaces
+  % Respect line breaks,
+  % print special symbols as themselves, and
+  % make each space count
+  % must do in this order:
+  \obeylines \uncatcodespecials \sepspaces
+}
+
+% Setup for the @verbatim environment
+%
+% Real tab expansion.
+\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
+%
+% We typeset each line of the verbatim in an \hbox, so we can handle
+% tabs.  The \global is in case the verbatim line starts with an accent,
+% or some other command that starts with a begin-group.  Otherwise, the
+% entire \verbbox would disappear at the corresponding end-group, before
+% it is typeset.  Meanwhile, we can't have nested verbatim commands
+% (can we?), so the \global won't be overwriting itself.
+\newbox\verbbox
+\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup}
+%
+\begingroup
+  \catcode`\^^I=\active
+  \gdef\tabexpand{%
+    \catcode`\^^I=\active
+    \def^^I{\leavevmode\egroup
+      \dimen\verbbox=\wd\verbbox % the width so far, or since the previous tab
+      \divide\dimen\verbbox by\tabw
+      \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw
+      \advance\dimen\verbbox by\tabw  % advance to next multiple of \tabw
+      \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox
+    }%
+  }
+\endgroup
+
+% start the verbatim environment.
+\def\setupverbatim{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \tt % easiest (and conventionally used) font for verbatim
+  % The \leavevmode here is for blank lines.  Otherwise, we would
+  % never \starttabox and the \egroup would end verbatim mode.
+  \def\par{\leavevmode\egroup\box\verbbox\endgraf}%
+  \tabexpand
+  \setupmarkupstyle{verbatim}%
+  % Respect line breaks,
+  % print special symbols as themselves, and
+  % make each space count.
+  % Must do in this order:
+  \obeylines \uncatcodespecials \sepspaces
+  \everypar{\starttabbox}%
+}
+
+% Do the @verb magic: verbatim text is quoted by unique
+% delimiter characters.  Before first delimiter expect a
+% right brace, after last delimiter expect closing brace:
+%
+%    \def\doverb'{'<char>#1<char>'}'{#1}
+%
+% [Knuth] p. 382; only eat outer {}
+\begingroup
+  \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
+  \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
+\endgroup
+%
+\def\verb{\begingroup\setupverb\doverb}
+%
+%
+% Do the @verbatim magic: define the macro \doverbatim so that
+% the (first) argument ends when '@end verbatim' is reached, ie:
+%
+%     \def\doverbatim#1@end verbatim{#1}
+%
+% For Texinfo it's a lot easier than for LaTeX,
+% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
+% we need not redefine '\', '{' and '}'.
+%
+% Inspired by LaTeX's verbatim command set [latex.ltx]
+%
+\begingroup
+  \catcode`\ =\active
+  \obeylines %
+  % ignore everything up to the first ^^M, that's the newline at the end
+  % of the @verbatim input line itself.  Otherwise we get an extra blank
+  % line in the output.
+  \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
+  % We really want {...\end verbatim} in the body of the macro, but
+  % without the active space; thus we have to use \xdef and \gobble.
+\endgroup
+%
+\envdef\verbatim{%
+    \setupverbatim\doverbatim
+}
+\let\Everbatim = \afterenvbreak
+
+
+% @verbatiminclude FILE - insert text of file in verbatim environment.
+%
+\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
+%
+\def\doverbatiminclude#1{%
+  {%
+    \makevalueexpandable
+    \setupverbatim
+    \indexnofonts       % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}%
+    \input #1
+    \afterenvbreak
+  }%
+}
+
+% @copying ... @end copying.
+% Save the text away for @insertcopying later.
+%
+% We save the uninterpreted tokens, rather than creating a box.
+% Saving the text in a box would be much easier, but then all the
+% typesetting commands (@smallbook, font changes, etc.) have to be done
+% beforehand -- and a) we want @copying to be done first in the source
+% file; b) letting users define the frontmatter in as flexible order as
+% possible is very desirable.
+%
+\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
+\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}}
+%
+\def\insertcopying{%
+  \begingroup
+    \parindent = 0pt  % paragraph indentation looks wrong on title page
+    \scanexp\copyingtext
+  \endgroup
+}
+
+
+\message{defuns,}
+% @defun etc.
+
+\newskip\defbodyindent \defbodyindent=.4in
+\newskip\defargsindent \defargsindent=50pt
+\newskip\deflastargmargin \deflastargmargin=18pt
+\newcount\defunpenalty
+
+% Start the processing of @deffn:
+\def\startdefun{%
+  \ifnum\lastpenalty<10000
+    \medbreak
+    \defunpenalty=10003 % Will keep this @deffn together with the
+                        % following @def command, see below.
+  \else
+    % If there are two @def commands in a row, we'll have a \nobreak,
+    % which is there to keep the function description together with its
+    % header.  But if there's nothing but headers, we need to allow a
+    % break somewhere.  Check specifically for penalty 10002, inserted
+    % by \printdefunline, instead of 10000, since the sectioning
+    % commands also insert a nobreak penalty, and we don't want to allow
+    % a break between a section heading and a defun.
+    %
+    % As a further refinement, we avoid "club" headers by signalling
+    % with penalty of 10003 after the very first @deffn in the
+    % sequence (see above), and penalty of 10002 after any following
+    % @def command.
+    \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi
+    %
+    % Similarly, after a section heading, do not allow a break.
+    % But do insert the glue.
+    \medskip  % preceded by discardable penalty, so not a breakpoint
+  \fi
+  %
+  \parindent=0in
+  \advance\leftskip by \defbodyindent
+  \exdentamount=\defbodyindent
+}
+
+\def\dodefunx#1{%
+  % First, check whether we are in the right environment:
+  \checkenv#1%
+  %
+  % As above, allow line break if we have multiple x headers in a row.
+  % It's not a great place, though.
+  \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi
+  %
+  % And now, it's time to reuse the body of the original defun:
+  \expandafter\gobbledefun#1%
+}
+\def\gobbledefun#1\startdefun{}
+
+% \printdefunline \deffnheader{text}
+%
+\def\printdefunline#1#2{%
+  \begingroup
+    % call \deffnheader:
+    #1#2 \endheader
+    % common ending:
+    \interlinepenalty = 10000
+    \advance\rightskip by 0pt plus 1fil\relax
+    \endgraf
+    \nobreak\vskip -\parskip
+    \penalty\defunpenalty  % signal to \startdefun and \dodefunx
+    % Some of the @defun-type tags do not enable magic parentheses,
+    % rendering the following check redundant.  But we don't optimize.
+    \checkparencounts
+  \endgroup
+}
+
+\def\Edefun{\endgraf\medbreak}
+
+% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
+% the only thing remaining is to define \deffnheader.
+%
+\def\makedefun#1{%
+  \expandafter\let\csname E#1\endcsname = \Edefun
+  \edef\temp{\noexpand\domakedefun
+    \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
+  \temp
+}
+
+% \domakedefun \deffn \deffnx \deffnheader
+%
+% Define \deffn and \deffnx, without parameters.
+% \deffnheader has to be defined explicitly.
+%
+\def\domakedefun#1#2#3{%
+  \envdef#1{%
+    \startdefun
+    \doingtypefnfalse    % distinguish typed functions from all else
+    \parseargusing\activeparens{\printdefunline#3}%
+  }%
+  \def#2{\dodefunx#1}%
+  \def#3%
+}
+
+\newif\ifdoingtypefn       % doing typed function?
+\newif\ifrettypeownline    % typeset return type on its own line?
+
+% @deftypefnnewline on|off says whether the return type of typed functions
+% are printed on their own line.  This affects @deftypefn, @deftypefun,
+% @deftypeop, and @deftypemethod.
+% 
+\parseargdef\deftypefnnewline{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @txideftypefnnl value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+% Untyped functions:
+
+% @deffn category name args
+\makedefun{deffn}{\deffngeneral{}}
+
+% @deffn category class name args
+\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
+
+% \defopon {category on}class name args
+\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deffngeneral {subind}category name args
+%
+\def\deffngeneral#1#2 #3 #4\endheader{%
+  % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}.
+  \dosubind{fn}{\code{#3}}{#1}%
+  \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
+}
+
+% Typed functions:
+
+% @deftypefn category type name args
+\makedefun{deftypefn}{\deftypefngeneral{}}
+
+% @deftypeop category class type name args
+\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
+
+% \deftypeopon {category on}class type name args
+\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypefngeneral {subind}category type name args
+%
+\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{fn}{\code{#4}}{#1}%
+  \doingtypefntrue
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+% Typed variables:
+
+% @deftypevr category type var args
+\makedefun{deftypevr}{\deftypecvgeneral{}}
+
+% @deftypecv category class type var args
+\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
+
+% \deftypecvof {category of}class type var args
+\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypecvgeneral {subind}category type var args
+%
+\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{vr}{\code{#4}}{#1}%
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+% Untyped variables:
+
+% @defvr category var args
+\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
+
+% @defcv category class var args
+\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
+
+% \defcvof {category of}class var args
+\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
+
+% Types:
+
+% @deftp category name args
+\makedefun{deftp}#1 #2 #3\endheader{%
+  \doind{tp}{\code{#2}}%
+  \defname{#1}{}{#2}\defunargs{#3\unskip}%
+}
+
+% Remaining @defun-like shortcuts:
+\makedefun{defun}{\deffnheader{\putwordDeffunc} }
+\makedefun{defmac}{\deffnheader{\putwordDefmac} }
+\makedefun{defspec}{\deffnheader{\putwordDefspec} }
+\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
+\makedefun{defvar}{\defvrheader{\putwordDefvar} }
+\makedefun{defopt}{\defvrheader{\putwordDefopt} }
+\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
+\makedefun{defmethod}{\defopon\putwordMethodon}
+\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
+\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
+\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
+
+% \defname, which formats the name of the @def (not the args).
+% #1 is the category, such as "Function".
+% #2 is the return type, if any.
+% #3 is the function name.
+%
+% We are followed by (but not passed) the arguments, if any.
+%
+\def\defname#1#2#3{%
+  \par
+  % Get the values of \leftskip and \rightskip as they were outside the @def...
+  \advance\leftskip by -\defbodyindent
+  %
+  % Determine if we are typesetting the return type of a typed function
+  % on a line by itself.
+  \rettypeownlinefalse
+  \ifdoingtypefn  % doing a typed function specifically?
+    % then check user option for putting return type on its own line:
+    \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else
+      \rettypeownlinetrue
+    \fi
+  \fi
+  %
+  % How we'll format the category name.  Putting it in brackets helps
+  % distinguish it from the body text that may end up on the next line
+  % just below it.
+  \def\temp{#1}%
+  \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
+  %
+  % Figure out line sizes for the paragraph shape.  We'll always have at
+  % least two.
+  \tempnum = 2
+  %
+  % The first line needs space for \box0; but if \rightskip is nonzero,
+  % we need only space for the part of \box0 which exceeds it:
+  \dimen0=\hsize  \advance\dimen0 by -\wd0  \advance\dimen0 by \rightskip
+  %
+  % If doing a return type on its own line, we'll have another line.
+  \ifrettypeownline
+    \advance\tempnum by 1
+    \def\maybeshapeline{0in \hsize}%
+  \else
+    \def\maybeshapeline{}%
+  \fi
+  %
+  % The continuations:
+  \dimen2=\hsize  \advance\dimen2 by -\defargsindent
+  %
+  % The final paragraph shape:
+  \parshape \tempnum  0in \dimen0  \maybeshapeline  \defargsindent \dimen2
+  %
+  % Put the category name at the right margin.
+  \noindent
+  \hbox to 0pt{%
+    \hfil\box0 \kern-\hsize
+    % \hsize has to be shortened this way:
+    \kern\leftskip
+    % Intentionally do not respect \rightskip, since we need the space.
+  }%
+  %
+  % Allow all lines to be underfull without complaint:
+  \tolerance=10000 \hbadness=10000
+  \exdentamount=\defbodyindent
+  {%
+    % defun fonts. We use typewriter by default (used to be bold) because:
+    % . we're printing identifiers, they should be in tt in principle.
+    % . in languages with many accents, such as Czech or French, it's
+    %   common to leave accents off identifiers.  The result looks ok in
+    %   tt, but exceedingly strange in rm.
+    % . we don't want -- and --- to be treated as ligatures.
+    % . this still does not fix the ?` and !` ligatures, but so far no
+    %   one has made identifiers using them :).
+    \df \tt
+    \def\temp{#2}% text of the return type
+    \ifx\temp\empty\else
+      \tclose{\temp}% typeset the return type
+      \ifrettypeownline
+        % put return type on its own line; prohibit line break following:
+        \hfil\vadjust{\nobreak}\break  
+      \else
+        \space  % type on same line, so just followed by a space
+      \fi
+    \fi           % no return type
+    #3% output function name
+  }%
+  {\rm\enskip}% hskip 0.5 em of \tenrm
+  %
+  \boldbrax
+  % arguments will be output next, if any.
+}
+
+% Print arguments in slanted roman (not ttsl), inconsistently with using
+% tt for the name.  This is because literal text is sometimes needed in
+% the argument list (groff manual), and ttsl and tt are not very
+% distinguishable.  Prevent hyphenation at `-' chars.
+%
+\def\defunargs#1{%
+  % use sl by default (not ttsl),
+  % tt for the names.
+  \df \sl \hyphenchar\font=0
+  %
+  % On the other hand, if an argument has two dashes (for instance), we
+  % want a way to get ttsl.  We used to recommend @var for that, so
+  % leave the code in, but it's strange for @var to lead to typewriter.
+  % Nowadays we recommend @code, since the difference between a ttsl hyphen
+  % and a tt hyphen is pretty tiny.  @code also disables ?` !`.
+  \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
+  #1%
+  \sl\hyphenchar\font=45
+}
+
+% We want ()&[] to print specially on the defun line.
+%
+\def\activeparens{%
+  \catcode`\(=\active \catcode`\)=\active
+  \catcode`\[=\active \catcode`\]=\active
+  \catcode`\&=\active
+}
+
+% Make control sequences which act like normal parenthesis chars.
+\let\lparen = ( \let\rparen = )
+
+% Be sure that we always have a definition for `(', etc.  For example,
+% if the fn name has parens in it, \boldbrax will not be in effect yet,
+% so TeX would otherwise complain about undefined control sequence.
+{
+  \activeparens
+  \global\let(=\lparen \global\let)=\rparen
+  \global\let[=\lbrack \global\let]=\rbrack
+  \global\let& = \&
+
+  \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
+  \gdef\magicamp{\let&=\amprm}
+}
+
+\newcount\parencount
+
+% If we encounter &foo, then turn on ()-hacking afterwards
+\newif\ifampseen
+\def\amprm#1 {\ampseentrue{\bf\&#1 }}
+
+\def\parenfont{%
+  \ifampseen
+    % At the first level, print parens in roman,
+    % otherwise use the default font.
+    \ifnum \parencount=1 \rm \fi
+  \else
+    % The \sf parens (in \boldbrax) actually are a little bolder than
+    % the contained text.  This is especially needed for [ and ] .
+    \sf
+  \fi
+}
+\def\infirstlevel#1{%
+  \ifampseen
+    \ifnum\parencount=1
+      #1%
+    \fi
+  \fi
+}
+\def\bfafterword#1 {#1 \bf}
+
+\def\opnr{%
+  \global\advance\parencount by 1
+  {\parenfont(}%
+  \infirstlevel \bfafterword
+}
+\def\clnr{%
+  {\parenfont)}%
+  \infirstlevel \sl
+  \global\advance\parencount by -1
+}
+
+\newcount\brackcount
+\def\lbrb{%
+  \global\advance\brackcount by 1
+  {\bf[}%
+}
+\def\rbrb{%
+  {\bf]}%
+  \global\advance\brackcount by -1
+}
+
+\def\checkparencounts{%
+  \ifnum\parencount=0 \else \badparencount \fi
+  \ifnum\brackcount=0 \else \badbrackcount \fi
+}
+% these should not use \errmessage; the glibc manual, at least, actually
+% has such constructs (when documenting function pointers).
+\def\badparencount{%
+  \message{Warning: unbalanced parentheses in @def...}%
+  \global\parencount=0
+}
+\def\badbrackcount{%
+  \message{Warning: unbalanced square brackets in @def...}%
+  \global\brackcount=0
+}
+
+
+\message{macros,}
+% @macro.
+
+% To do this right we need a feature of e-TeX, \scantokens,
+% which we arrange to emulate with a temporary file in ordinary TeX.
+\ifx\eTeXversion\thisisundefined
+  \newwrite\macscribble
+  \def\scantokens#1{%
+    \toks0={#1}%
+    \immediate\openout\macscribble=\jobname.tmp
+    \immediate\write\macscribble{\the\toks0}%
+    \immediate\closeout\macscribble
+    \input \jobname.tmp
+  }
+\fi
+
+\def\scanmacro#1{\begingroup
+  \newlinechar`\^^M
+  \let\xeatspaces\eatspaces
+  %
+  % Undo catcode changes of \startcontents and \doprintindex
+  % When called from @insertcopying or (short)caption, we need active
+  % backslash to get it printed correctly.  Previously, we had
+  % \catcode`\\=\other instead.  We'll see whether a problem appears
+  % with macro expansion.				--kasal, 19aug04
+  \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
+  %
+  % ... and for \example:
+  \spaceisspace
+  %
+  % The \empty here causes a following catcode 5 newline to be eaten as
+  % part of reading whitespace after a control sequence.  It does not
+  % eat a catcode 13 newline.  There's no good way to handle the two
+  % cases (untried: maybe e-TeX's \everyeof could help, though plain TeX
+  % would then have different behavior).  See the Macro Details node in
+  % the manual for the workaround we recommend for macros and
+  % line-oriented commands.
+  % 
+  \scantokens{#1\empty}%
+\endgroup}
+
+\def\scanexp#1{%
+  \edef\temp{\noexpand\scanmacro{#1}}%
+  \temp
+}
+
+\newcount\paramno   % Count of parameters
+\newtoks\macname    % Macro name
+\newif\ifrecursive  % Is it recursive?
+
+% List of all defined macros in the form
+%    \definedummyword\macro1\definedummyword\macro2...
+% Currently is also contains all @aliases; the list can be split
+% if there is a need.
+\def\macrolist{}
+
+% Add the macro to \macrolist
+\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
+\def\addtomacrolistxxx#1{%
+     \toks0 = \expandafter{\macrolist\definedummyword#1}%
+     \xdef\macrolist{\the\toks0}%
+}
+
+% Utility routines.
+% This does \let #1 = #2, with \csnames; that is,
+%   \let \csname#1\endcsname = \csname#2\endcsname
+% (except of course we have to play expansion games).
+%
+\def\cslet#1#2{%
+  \expandafter\let
+  \csname#1\expandafter\endcsname
+  \csname#2\endcsname
+}
+
+% Trim leading and trailing spaces off a string.
+% Concepts from aro-bend problem 15 (see CTAN).
+{\catcode`\@=11
+\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
+\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
+\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
+\def\unbrace#1{#1}
+\unbrace{\gdef\trim@@@ #1 } #2@{#1}
+}
+
+% Trim a single trailing ^^M off a string.
+{\catcode`\^^M=\other \catcode`\Q=3%
+\gdef\eatcr #1{\eatcra #1Q^^MQ}%
+\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
+\gdef\eatcrb#1Q#2Q{#1}%
+}
+
+% Macro bodies are absorbed as an argument in a context where
+% all characters are catcode 10, 11 or 12, except \ which is active
+% (as in normal texinfo). It is necessary to change the definition of \
+% to recognize macro arguments; this is the job of \mbodybackslash.
+%
+% Non-ASCII encodings make 8-bit characters active, so un-activate
+% them to avoid their expansion.  Must do this non-globally, to
+% confine the change to the current group.
+%
+% It's necessary to have hard CRs when the macro is executed. This is
+% done by making ^^M (\endlinechar) catcode 12 when reading the macro
+% body, and then making it the \newlinechar in \scanmacro.
+%
+\def\scanctxt{% used as subroutine
+  \catcode`\"=\other
+  \catcode`\+=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\@=\other
+  \catcode`\^=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\~=\other
+  \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi
+}
+
+\def\scanargctxt{% used for copying and captions, not macros.
+  \scanctxt
+  \catcode`\\=\other
+  \catcode`\^^M=\other
+}
+
+\def\macrobodyctxt{% used for @macro definitions
+  \scanctxt
+  \catcode`\{=\other
+  \catcode`\}=\other
+  \catcode`\^^M=\other
+  \usembodybackslash
+}
+
+\def\macroargctxt{% used when scanning invocations
+  \scanctxt
+  \catcode`\\=0
+}
+% why catcode 0 for \ in the above?  To recognize \\ \{ \} as "escapes"
+% for the single characters \ { }.  Thus, we end up with the "commands"
+% that would be written @\ @{ @} in a Texinfo document.
+% 
+% We already have @{ and @}.  For @\, we define it here, and only for
+% this purpose, to produce a typewriter backslash (so, the @\ that we
+% define for @math can't be used with @macro calls):
+%
+\def\\{\normalbackslash}%
+% 
+% We would like to do this for \, too, since that is what makeinfo does.
+% But it is not possible, because Texinfo already has a command @, for a
+% cedilla accent.  Documents must use @comma{} instead.
+%
+% \anythingelse will almost certainly be an error of some kind.
+
+
+% \mbodybackslash is the definition of \ in @macro bodies.
+% It maps \foo\ => \csname macarg.foo\endcsname => #N
+% where N is the macro parameter number.
+% We define \csname macarg.\endcsname to be \realbackslash, so
+% \\ in macro replacement text gets you a backslash.
+%
+{\catcode`@=0 @catcode`@\=@active
+ @gdef@usembodybackslash{@let\=@mbodybackslash}
+ @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
+}
+\expandafter\def\csname macarg.\endcsname{\realbackslash}
+
+\def\margbackslash#1{\char`\#1 }
+
+\def\macro{\recursivefalse\parsearg\macroxxx}
+\def\rmacro{\recursivetrue\parsearg\macroxxx}
+
+\def\macroxxx#1{%
+  \getargs{#1}% now \macname is the macname and \argl the arglist
+  \ifx\argl\empty       % no arguments
+     \paramno=0\relax
+  \else
+     \expandafter\parsemargdef \argl;%
+     \if\paramno>256\relax
+       \ifx\eTeXversion\thisisundefined
+         \errhelp = \EMsimple
+         \errmessage{You need eTeX to compile a file with macros with more than 256 arguments}
+       \fi
+     \fi
+  \fi
+  \if1\csname ismacro.\the\macname\endcsname
+     \message{Warning: redefining \the\macname}%
+  \else
+     \expandafter\ifx\csname \the\macname\endcsname \relax
+     \else \errmessage{Macro name \the\macname\space already defined}\fi
+     \global\cslet{macsave.\the\macname}{\the\macname}%
+     \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
+     \addtomacrolist{\the\macname}%
+  \fi
+  \begingroup \macrobodyctxt
+  \ifrecursive \expandafter\parsermacbody
+  \else \expandafter\parsemacbody
+  \fi}
+
+\parseargdef\unmacro{%
+  \if1\csname ismacro.#1\endcsname
+    \global\cslet{#1}{macsave.#1}%
+    \global\expandafter\let \csname ismacro.#1\endcsname=0%
+    % Remove the macro name from \macrolist:
+    \begingroup
+      \expandafter\let\csname#1\endcsname \relax
+      \let\definedummyword\unmacrodo
+      \xdef\macrolist{\macrolist}%
+    \endgroup
+  \else
+    \errmessage{Macro #1 not defined}%
+  \fi
+}
+
+% Called by \do from \dounmacro on each macro.  The idea is to omit any
+% macro definitions that have been changed to \relax.
+%
+\def\unmacrodo#1{%
+  \ifx #1\relax
+    % remove this
+  \else
+    \noexpand\definedummyword \noexpand#1%
+  \fi
+}
+
+% This makes use of the obscure feature that if the last token of a
+% <parameter list> is #, then the preceding argument is delimited by
+% an opening brace, and that opening brace is not consumed.
+\def\getargs#1{\getargsxxx#1{}}
+\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
+\def\getmacname#1 #2\relax{\macname={#1}}
+\def\getmacargs#1{\def\argl{#1}}
+
+% For macro processing make @ a letter so that we can make Texinfo private macro names.
+\edef\texiatcatcode{\the\catcode`\@}
+\catcode `@=11\relax
+
+% Parse the optional {params} list.  Set up \paramno and \paramlist
+% so \defmacro knows what to do.  Define \macarg.BLAH for each BLAH
+% in the params list to some hook where the argument si to be expanded.  If
+% there are less than 10 arguments that hook is to be replaced by ##N where N
+% is the position in that list, that is to say the macro arguments are to be
+% defined `a la TeX in the macro body.  
+%
+% That gets used by \mbodybackslash (above).
+%
+% We need to get `macro parameter char #' into several definitions.
+% The technique used is stolen from LaTeX: let \hash be something
+% unexpandable, insert that wherever you need a #, and then redefine
+% it to # just before using the token list produced.
+%
+% The same technique is used to protect \eatspaces till just before
+% the macro is used.
+%
+% If there are 10 or more arguments, a different technique is used, where the
+% hook remains in the body, and when macro is to be expanded the body is
+% processed again to replace the arguments.
+%
+% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the
+% argument N value and then \edef  the body (nothing else will expand because of
+% the catcode regime underwhich the body was input).
+%
+% If you compile with TeX (not eTeX), and you have macros with 10 or more
+% arguments, you need that no macro has more than 256 arguments, otherwise an
+% error is produced.
+\def\parsemargdef#1;{%
+  \paramno=0\def\paramlist{}%
+  \let\hash\relax
+  \let\xeatspaces\relax
+  \parsemargdefxxx#1,;,%
+  % In case that there are 10 or more arguments we parse again the arguments
+  % list to set new definitions for the \macarg.BLAH macros corresponding to
+  % each BLAH argument. It was anyhow needed to parse already once this list
+  % in order to count the arguments, and as macros with at most 9 arguments
+  % are by far more frequent than macro with 10 or more arguments, defining
+  % twice the \macarg.BLAH macros does not cost too much processing power.
+  \ifnum\paramno<10\relax\else
+    \paramno0\relax
+    \parsemmanyargdef@@#1,;,% 10 or more arguments
+  \fi
+}
+\def\parsemargdefxxx#1,{%
+  \if#1;\let\next=\relax
+  \else \let\next=\parsemargdefxxx
+    \advance\paramno by 1
+    \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
+        {\xeatspaces{\hash\the\paramno}}%
+    \edef\paramlist{\paramlist\hash\the\paramno,}%
+  \fi\next}
+
+\def\parsemmanyargdef@@#1,{%
+  \if#1;\let\next=\relax
+  \else 
+    \let\next=\parsemmanyargdef@@
+    \edef\tempb{\eatspaces{#1}}%
+    \expandafter\def\expandafter\tempa
+       \expandafter{\csname macarg.\tempb\endcsname}%
+    % Note that we need some extra \noexpand\noexpand, this is because we
+    % don't want \the  to be expanded in the \parsermacbody  as it uses an
+    % \xdef .
+    \expandafter\edef\tempa
+      {\noexpand\noexpand\noexpand\the\toks\the\paramno}%
+    \advance\paramno by 1\relax
+  \fi\next}
+
+% These two commands read recursive and nonrecursive macro bodies.
+% (They're different since rec and nonrec macros end differently.)
+%
+
+\catcode `\@\texiatcatcode
+\long\def\parsemacbody#1@end macro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\long\def\parsermacbody#1@end rmacro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\catcode `\@=11\relax
+
+\let\endargs@\relax
+\let\nil@\relax
+\def\nilm@{\nil@}%
+\long\def\nillm@{\nil@}%
+
+% This macro is expanded during the Texinfo macro expansion, not during its
+% definition.  It gets all the arguments values and assigns them to macros
+% macarg.ARGNAME
+%
+% #1 is the macro name
+% #2 is the list of argument names
+% #3 is the list of argument values
+\def\getargvals@#1#2#3{%
+  \def\macargdeflist@{}%
+  \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion.
+  \def\paramlist{#2,\nil@}%
+  \def\macroname{#1}%
+  \begingroup
+  \macroargctxt
+  \def\argvaluelist{#3,\nil@}%
+  \def\@tempa{#3}%
+  \ifx\@tempa\empty
+    \setemptyargvalues@
+  \else
+    \getargvals@@
+  \fi
+}
+
+% 
+\def\getargvals@@{%
+  \ifx\paramlist\nilm@
+      % Some sanity check needed here that \argvaluelist is also empty.
+      \ifx\argvaluelist\nillm@
+      \else
+        \errhelp = \EMsimple
+        \errmessage{Too many arguments in macro `\macroname'!}%
+      \fi
+      \let\next\macargexpandinbody@
+  \else
+    \ifx\argvaluelist\nillm@
+       % No more arguments values passed to macro.  Set remaining named-arg
+       % macros to empty.
+       \let\next\setemptyargvalues@
+    \else
+      % pop current arg name into \@tempb
+      \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\paramlist}%
+       % pop current argument value into \@tempc
+      \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\argvaluelist}%
+       % Here \@tempb is the current arg name and \@tempc is the current arg value.
+       % First place the new argument macro definition into \@tempd
+       \expandafter\macname\expandafter{\@tempc}%
+       \expandafter\let\csname macarg.\@tempb\endcsname\relax
+       \expandafter\def\expandafter\@tempe\expandafter{%
+         \csname macarg.\@tempb\endcsname}%
+       \edef\@tempd{\long\def\@tempe{\the\macname}}%
+       \push@\@tempd\macargdeflist@
+       \let\next\getargvals@@
+    \fi
+  \fi
+  \next
+}
+
+\def\push@#1#2{%
+  \expandafter\expandafter\expandafter\def
+  \expandafter\expandafter\expandafter#2%
+  \expandafter\expandafter\expandafter{%
+  \expandafter#1#2}%
+}
+
+% Replace arguments by their values in the macro body, and place the result
+% in macro \@tempa
+\def\macvalstoargs@{%
+  %  To do this we use the property that token registers that are \the'ed
+  % within an \edef  expand only once. So we are going to place all argument
+  % values into respective token registers.
+  %
+  % First we save the token context, and initialize argument numbering.
+  \begingroup
+    \paramno0\relax
+    % Then, for each argument number #N, we place the corresponding argument
+    % value into a new token list register \toks#N
+    \expandafter\putargsintokens@\saveparamlist@,;,%
+    % Then, we expand the body so that argument are replaced by their
+    % values. The trick for values not to be expanded themselves is that they
+    % are within tokens and that tokens expand only once in an \edef .
+    \edef\@tempc{\csname mac.\macroname .body\endcsname}%
+    % Now we restore the token stack pointer to free the token list registers
+    % which we have used, but we make sure that expanded body is saved after
+    % group.
+    \expandafter
+  \endgroup
+  \expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
+  }
+
+\def\macargexpandinbody@{% 
+  %% Define the named-macro outside of this group and then close this group. 
+  \expandafter
+  \endgroup
+  \macargdeflist@
+  % First the replace in body the macro arguments by their values, the result
+  % is in \@tempa .
+  \macvalstoargs@
+  % Then we point at the \norecurse or \gobble (for recursive) macro value
+  % with \@tempb .
+  \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname
+  % Depending on whether it is recursive or not, we need some tailing
+  % \egroup .
+  \ifx\@tempb\gobble
+     \let\@tempc\relax
+  \else
+     \let\@tempc\egroup
+  \fi
+  % And now we do the real job:
+  \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}%
+  \@tempd
+}
+
+\def\putargsintokens@#1,{%
+  \if#1;\let\next\relax
+  \else
+    \let\next\putargsintokens@
+    % First we allocate the new token list register, and give it a temporary
+    % alias \@tempb .
+    \toksdef\@tempb\the\paramno
+    % Then we place the argument value into that token list register.
+    \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname
+    \expandafter\@tempb\expandafter{\@tempa}%
+    \advance\paramno by 1\relax
+  \fi
+  \next
+}
+
+% Save the token stack pointer into macro #1
+\def\texisavetoksstackpoint#1{\edef#1{\the\@cclvi}}
+% Restore the token stack pointer from number in macro #1
+\def\texirestoretoksstackpoint#1{\expandafter\mathchardef\expandafter\@cclvi#1\relax}
+% newtoks that can be used non \outer .
+\def\texinonouternewtoks{\alloc@ 5\toks \toksdef \@cclvi}
+
+% Tailing missing arguments are set to empty
+\def\setemptyargvalues@{%
+  \ifx\paramlist\nilm@
+    \let\next\macargexpandinbody@
+  \else
+    \expandafter\setemptyargvaluesparser@\paramlist\endargs@
+    \let\next\setemptyargvalues@
+  \fi
+  \next
+}
+
+\def\setemptyargvaluesparser@#1,#2\endargs@{%
+  \expandafter\def\expandafter\@tempa\expandafter{%
+    \expandafter\def\csname macarg.#1\endcsname{}}%
+  \push@\@tempa\macargdeflist@
+  \def\paramlist{#2}%
+}
+
+% #1 is the element target macro
+% #2 is the list macro
+% #3,#4\endargs@ is the list value
+\def\pop@#1#2#3,#4\endargs@{%
+   \def#1{#3}%
+   \def#2{#4}%
+}
+\long\def\longpop@#1#2#3,#4\endargs@{%
+   \long\def#1{#3}%
+   \long\def#2{#4}%
+}
+
+% This defines a Texinfo @macro. There are eight cases: recursive and
+% nonrecursive macros of zero, one, up to nine, and many arguments.
+% Much magic with \expandafter here.
+% \xdef is used so that macro definitions will survive the file
+% they're defined in; @include reads the file inside a group.
+%
+\def\defmacro{%
+  \let\hash=##% convert placeholders to macro parameter chars
+  \ifrecursive
+    \ifcase\paramno
+    % 0
+      \expandafter\xdef\csname\the\macname\endcsname{%
+        \noexpand\scanmacro{\temp}}%
+    \or % 1
+      \expandafter\xdef\csname\the\macname\endcsname{%
+         \bgroup\noexpand\macroargctxt
+         \noexpand\braceorline
+         \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+      \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+         \egroup\noexpand\scanmacro{\temp}}%
+    \else
+      \ifnum\paramno<10\relax % at most 9
+        \expandafter\xdef\csname\the\macname\endcsname{%
+           \bgroup\noexpand\macroargctxt
+           \noexpand\csname\the\macname xx\endcsname}%
+        \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+            \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+        \expandafter\expandafter
+        \expandafter\xdef
+        \expandafter\expandafter
+          \csname\the\macname xxx\endcsname
+            \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+      \else % 10 or more
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \noexpand\getargvals@{\the\macname}{\argl}%
+        }%    
+        \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+        \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble
+      \fi
+    \fi
+  \else
+    \ifcase\paramno
+    % 0
+      \expandafter\xdef\csname\the\macname\endcsname{%
+        \noexpand\norecurse{\the\macname}%
+        \noexpand\scanmacro{\temp}\egroup}%
+    \or % 1
+      \expandafter\xdef\csname\the\macname\endcsname{%
+         \bgroup\noexpand\macroargctxt
+         \noexpand\braceorline
+         \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+      \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+        \egroup
+        \noexpand\norecurse{\the\macname}%
+        \noexpand\scanmacro{\temp}\egroup}%
+    \else % at most 9
+      \ifnum\paramno<10\relax
+        \expandafter\xdef\csname\the\macname\endcsname{%
+           \bgroup\noexpand\macroargctxt
+           \expandafter\noexpand\csname\the\macname xx\endcsname}%
+        \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+            \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+        \expandafter\expandafter
+        \expandafter\xdef
+        \expandafter\expandafter
+        \csname\the\macname xxx\endcsname
+        \paramlist{%
+            \egroup
+            \noexpand\norecurse{\the\macname}%
+            \noexpand\scanmacro{\temp}\egroup}%
+      \else % 10 or more:
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \noexpand\getargvals@{\the\macname}{\argl}%
+        }%
+        \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+        \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse
+      \fi
+    \fi
+  \fi}
+
+\catcode `\@\texiatcatcode\relax
+
+\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
+
+% \braceorline decides whether the next nonwhitespace character is a
+% {.  If so it reads up to the closing }, if not, it reads the whole
+% line.  Whatever was read is then fed to the next control sequence
+% as an argument (by \parsebrace or \parsearg).
+% 
+\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorlinexxx{%
+  \ifx\nchar\bgroup\else
+    \expandafter\parsearg
+  \fi \macnamexxx}
+
+
+% @alias.
+% We need some trickery to remove the optional spaces around the equal
+% sign.  Make them active and then expand them all to nothing.
+%
+\def\alias{\parseargusing\obeyspaces\aliasxxx}
+\def\aliasxxx #1{\aliasyyy#1\relax}
+\def\aliasyyy #1=#2\relax{%
+  {%
+    \expandafter\let\obeyedspace=\empty
+    \addtomacrolist{#1}%
+    \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
+  }%
+  \next
+}
+
+
+\message{cross references,}
+
+\newwrite\auxfile
+\newif\ifhavexrefs    % True if xref values are known.
+\newif\ifwarnedxrefs  % True if we warned once that they aren't known.
+
+% @inforef is relatively simple.
+\def\inforef #1{\inforefzzz #1,,,,**}
+\def\inforefzzz #1,#2,#3,#4**{%
+  \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+  node \samp{\ignorespaces#1{}}}
+
+% @node's only job in TeX is to define \lastnode, which is used in
+% cross-references.  The @node line might or might not have commas, and
+% might or might not have spaces before the first comma, like:
+% @node foo , bar , ...
+% We don't want such trailing spaces in the node name.
+%
+\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
+%
+% also remove a trailing comma, in case of something like this:
+% @node Help-Cross,  ,  , Cross-refs
+\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
+\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
+
+\let\nwnode=\node
+\let\lastnode=\empty
+
+% Write a cross-reference definition for the current node.  #1 is the
+% type (Ynumbered, Yappendix, Ynothing).
+%
+\def\donoderef#1{%
+  \ifx\lastnode\empty\else
+    \setref{\lastnode}{#1}%
+    \global\let\lastnode=\empty
+  \fi
+}
+
+% @anchor{NAME} -- define xref target at arbitrary point.
+%
+\newcount\savesfregister
+%
+\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
+\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
+\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
+
+% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
+% anchor), which consists of three parts:
+% 1) NAME-title - the current sectioning name taken from \lastsection,
+%                 or the anchor name.
+% 2) NAME-snt   - section number and type, passed as the SNT arg, or
+%                 empty for anchors.
+% 3) NAME-pg    - the page number.
+%
+% This is called from \donoderef, \anchor, and \dofloat.  In the case of
+% floats, there is an additional part, which is not written here:
+% 4) NAME-lof   - the text as it should appear in a @listoffloats.
+%
+\def\setref#1#2{%
+  \pdfmkdest{#1}%
+  \iflinks
+    {%
+      \atdummies  % preserve commands, but don't expand them
+      \edef\writexrdef##1##2{%
+	\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
+	  ##1}{##2}}% these are parameters of \writexrdef
+      }%
+      \toks0 = \expandafter{\lastsection}%
+      \immediate \writexrdef{title}{\the\toks0 }%
+      \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
+      \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout
+    }%
+  \fi
+}
+
+% @xrefautosectiontitle on|off says whether @section(ing) names are used
+% automatically in xrefs, if the third arg is not explicitly specified.
+% This was provided as a "secret" @set xref-automatic-section-title
+% variable, now it's official.
+% 
+\parseargdef\xrefautomaticsectiontitle{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @xrefautomaticsectiontitle value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+% 
+% @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
+% the node name, #2 the name of the Info cross-reference, #3 the printed
+% node name, #4 the name of the Info file, #5 the name of the printed
+% manual.  All but the node name can be omitted.
+%
+\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
+\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
+\def\ref#1{\xrefX[#1,,,,,,,]}
+%
+\newbox\toprefbox
+\newbox\printedrefnamebox
+\newbox\infofilenamebox
+\newbox\printedmanualbox
+%
+\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
+  \unsepspaces
+  %
+  % Get args without leading/trailing spaces.
+  \def\printedrefname{\ignorespaces #3}%
+  \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
+  %
+  \def\infofilename{\ignorespaces #4}%
+  \setbox\infofilenamebox = \hbox{\infofilename\unskip}%
+  %
+  \def\printedmanual{\ignorespaces #5}%
+  \setbox\printedmanualbox  = \hbox{\printedmanual\unskip}%
+  %
+  % If the printed reference name (arg #3) was not explicitly given in
+  % the @xref, figure out what we want to use.
+  \ifdim \wd\printedrefnamebox = 0pt
+    % No printed node name was explicitly given.
+    \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
+      % Not auto section-title: use node name inside the square brackets.
+      \def\printedrefname{\ignorespaces #1}%
+    \else
+      % Auto section-title: use chapter/section title inside
+      % the square brackets if we have it.
+      \ifdim \wd\printedmanualbox > 0pt
+        % It is in another manual, so we don't have it; use node name.
+        \def\printedrefname{\ignorespaces #1}%
+      \else
+        \ifhavexrefs
+          % We (should) know the real title if we have the xref values.
+          \def\printedrefname{\refx{#1-title}{}}%
+        \else
+          % Otherwise just copy the Info node name.
+          \def\printedrefname{\ignorespaces #1}%
+        \fi%
+      \fi
+    \fi
+  \fi
+  %
+  % Make link in pdf output.
+  \ifpdf
+    {\indexnofonts
+     \turnoffactive
+     \makevalueexpandable
+     % This expands tokens, so do it after making catcode changes, so _
+     % etc. don't get their TeX definitions.  This ignores all spaces in
+     % #4, including (wrongly) those in the middle of the filename.
+     \getfilename{#4}%
+     %
+     % This (wrongly) does not take account of leading or trailing
+     % spaces in #1, which should be ignored.
+     \edef\pdfxrefdest{#1}%
+     \ifx\pdfxrefdest\empty
+       \def\pdfxrefdest{Top}% no empty targets
+     \else
+       \txiescapepdf\pdfxrefdest  % escape PDF special chars
+     \fi
+     %
+     \leavevmode
+     \startlink attr{/Border [0 0 0]}%
+     \ifnum\filenamelength>0
+       goto file{\the\filename.pdf} name{\pdfxrefdest}%
+     \else
+       goto name{\pdfmkpgn{\pdfxrefdest}}%
+     \fi
+    }%
+    \setcolor{\linkcolor}%
+  \fi
+  %
+  % Float references are printed completely differently: "Figure 1.2"
+  % instead of "[somenode], p.3".  We distinguish them by the
+  % LABEL-title being set to a magic string.
+  {%
+    % Have to otherify everything special to allow the \csname to
+    % include an _ in the xref name, etc.
+    \indexnofonts
+    \turnoffactive
+    \expandafter\global\expandafter\let\expandafter\Xthisreftitle
+      \csname XR#1-title\endcsname
+  }%
+  \iffloat\Xthisreftitle
+    % If the user specified the print name (third arg) to the ref,
+    % print it instead of our usual "Figure 1.2".
+    \ifdim\wd\printedrefnamebox = 0pt
+      \refx{#1-snt}{}%
+    \else
+      \printedrefname
+    \fi
+    %
+    % If the user also gave the printed manual name (fifth arg), append
+    % "in MANUALNAME".
+    \ifdim \wd\printedmanualbox > 0pt
+      \space \putwordin{} \cite{\printedmanual}%
+    \fi
+  \else
+    % node/anchor (non-float) references.
+    % 
+    % If we use \unhbox to print the node names, TeX does not insert
+    % empty discretionaries after hyphens, which means that it will not
+    % find a line break at a hyphen in a node names.  Since some manuals
+    % are best written with fairly long node names, containing hyphens,
+    % this is a loss.  Therefore, we give the text of the node name
+    % again, so it is as if TeX is seeing it for the first time.
+    % 
+    \ifdim \wd\printedmanualbox > 0pt
+      % Cross-manual reference with a printed manual name.
+      % 
+      \crossmanualxref{\cite{\printedmanual\unskip}}%
+    %
+    \else\ifdim \wd\infofilenamebox > 0pt
+      % Cross-manual reference with only an info filename (arg 4), no
+      % printed manual name (arg 5).  This is essentially the same as
+      % the case above; we output the filename, since we have nothing else.
+      % 
+      \crossmanualxref{\code{\infofilename\unskip}}%
+    %
+    \else
+      % Reference within this manual.
+      %
+      % _ (for example) has to be the character _ for the purposes of the
+      % control sequence corresponding to the node, but it has to expand
+      % into the usual \leavevmode...\vrule stuff for purposes of
+      % printing. So we \turnoffactive for the \refx-snt, back on for the
+      % printing, back off for the \refx-pg.
+      {\turnoffactive
+       % Only output a following space if the -snt ref is nonempty; for
+       % @unnumbered and @anchor, it won't be.
+       \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+       \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
+      }%
+      % output the `[mynode]' via the macro below so it can be overridden.
+      \xrefprintnodename\printedrefname
+      %
+      % But we always want a comma and a space:
+      ,\space
+      %
+      % output the `page 3'.
+      \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
+    \fi\fi
+  \fi
+  \endlink
+\endgroup}
+
+% Output a cross-manual xref to #1.  Used just above (twice).
+% 
+% Only include the text "Section ``foo'' in" if the foo is neither
+% missing or Top.  Thus, @xref{,,,foo,The Foo Manual} outputs simply
+% "see The Foo Manual", the idea being to refer to the whole manual.
+% 
+% But, this being TeX, we can't easily compare our node name against the
+% string "Top" while ignoring the possible spaces before and after in
+% the input.  By adding the arbitrary 7sp below, we make it much less
+% likely that a real node name would have the same width as "Top" (e.g.,
+% in a monospaced font).  Hopefully it will never happen in practice.
+% 
+% For the same basic reason, we retypeset the "Top" at every
+% reference, since the current font is indeterminate.
+% 
+\def\crossmanualxref#1{%
+  \setbox\toprefbox = \hbox{Top\kern7sp}%
+  \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
+  \ifdim \wd2 > 7sp  % nonempty?
+    \ifdim \wd2 = \wd\toprefbox \else  % same as Top?
+      \putwordSection{} ``\printedrefname'' \putwordin{}\space
+    \fi
+  \fi
+  #1%
+}
+
+% This macro is called from \xrefX for the `[nodename]' part of xref
+% output.  It's a separate macro only so it can be changed more easily,
+% since square brackets don't work well in some documents.  Particularly
+% one that Bob is working on :).
+%
+\def\xrefprintnodename#1{[#1]}
+
+% Things referred to by \setref.
+%
+\def\Ynothing{}
+\def\Yomitfromtoc{}
+\def\Ynumbered{%
+  \ifnum\secno=0
+    \putwordChapter@tie \the\chapno
+  \else \ifnum\subsecno=0
+    \putwordSection@tie \the\chapno.\the\secno
+  \else \ifnum\subsubsecno=0
+    \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
+  \else
+    \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
+  \fi\fi\fi
+}
+\def\Yappendix{%
+  \ifnum\secno=0
+     \putwordAppendix@tie @char\the\appendixno{}%
+  \else \ifnum\subsecno=0
+     \putwordSection@tie @char\the\appendixno.\the\secno
+  \else \ifnum\subsubsecno=0
+    \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
+  \else
+    \putwordSection@tie
+      @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
+  \fi\fi\fi
+}
+
+% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
+% If its value is nonempty, SUFFIX is output afterward.
+%
+\def\refx#1#2{%
+  {%
+    \indexnofonts
+    \otherbackslash
+    \expandafter\global\expandafter\let\expandafter\thisrefX
+      \csname XR#1\endcsname
+  }%
+  \ifx\thisrefX\relax
+    % If not defined, say something at least.
+    \angleleft un\-de\-fined\angleright
+    \iflinks
+      \ifhavexrefs
+        {\toks0 = {#1}% avoid expansion of possibly-complex value
+         \message{\linenumber Undefined cross reference `\the\toks0'.}}%
+      \else
+        \ifwarnedxrefs\else
+          \global\warnedxrefstrue
+          \message{Cross reference values unknown; you must run TeX again.}%
+        \fi
+      \fi
+    \fi
+  \else
+    % It's defined, so just use it.
+    \thisrefX
+  \fi
+  #2% Output the suffix in any case.
+}
+
+% This is the macro invoked by entries in the aux file.  Usually it's
+% just a \def (we prepend XR to the control sequence name to avoid
+% collisions).  But if this is a float type, we have more work to do.
+%
+\def\xrdef#1#2{%
+  {% The node name might contain 8-bit characters, which in our current
+   % implementation are changed to commands like @'e.  Don't let these
+   % mess up the control sequence name.
+    \indexnofonts
+    \turnoffactive
+    \xdef\safexrefname{#1}%
+  }%
+  %
+  \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref
+  %
+  % Was that xref control sequence that we just defined for a float?
+  \expandafter\iffloat\csname XR\safexrefname\endcsname
+    % it was a float, and we have the (safe) float type in \iffloattype.
+    \expandafter\let\expandafter\floatlist
+      \csname floatlist\iffloattype\endcsname
+    %
+    % Is this the first time we've seen this float type?
+    \expandafter\ifx\floatlist\relax
+      \toks0 = {\do}% yes, so just \do
+    \else
+      % had it before, so preserve previous elements in list.
+      \toks0 = \expandafter{\floatlist\do}%
+    \fi
+    %
+    % Remember this xref in the control sequence \floatlistFLOATTYPE,
+    % for later use in \listoffloats.
+    \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0
+      {\safexrefname}}%
+  \fi
+}
+
+% Read the last existing aux file, if any.  No error if none exists.
+%
+\def\tryauxfile{%
+  \openin 1 \jobname.aux
+  \ifeof 1 \else
+    \readdatafile{aux}%
+    \global\havexrefstrue
+  \fi
+  \closein 1
+}
+
+\def\setupdatafile{%
+  \catcode`\^^@=\other
+  \catcode`\^^A=\other
+  \catcode`\^^B=\other
+  \catcode`\^^C=\other
+  \catcode`\^^D=\other
+  \catcode`\^^E=\other
+  \catcode`\^^F=\other
+  \catcode`\^^G=\other
+  \catcode`\^^H=\other
+  \catcode`\^^K=\other
+  \catcode`\^^L=\other
+  \catcode`\^^N=\other
+  \catcode`\^^P=\other
+  \catcode`\^^Q=\other
+  \catcode`\^^R=\other
+  \catcode`\^^S=\other
+  \catcode`\^^T=\other
+  \catcode`\^^U=\other
+  \catcode`\^^V=\other
+  \catcode`\^^W=\other
+  \catcode`\^^X=\other
+  \catcode`\^^Z=\other
+  \catcode`\^^[=\other
+  \catcode`\^^\=\other
+  \catcode`\^^]=\other
+  \catcode`\^^^=\other
+  \catcode`\^^_=\other
+  % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
+  % in xref tags, i.e., node names.  But since ^^e4 notation isn't
+  % supported in the main text, it doesn't seem desirable.  Furthermore,
+  % that is not enough: for node names that actually contain a ^
+  % character, we would end up writing a line like this: 'xrdef {'hat
+  % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
+  % argument, and \hat is not an expandable control sequence.  It could
+  % all be worked out, but why?  Either we support ^^ or we don't.
+  %
+  % The other change necessary for this was to define \auxhat:
+  % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
+  % and then to call \auxhat in \setq.
+  %
+  \catcode`\^=\other
+  %
+  % Special characters.  Should be turned off anyway, but...
+  \catcode`\~=\other
+  \catcode`\[=\other
+  \catcode`\]=\other
+  \catcode`\"=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\$=\other
+  \catcode`\#=\other
+  \catcode`\&=\other
+  \catcode`\%=\other
+  \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
+  %
+  % This is to support \ in node names and titles, since the \
+  % characters end up in a \csname.  It's easier than
+  % leaving it active and making its active definition an actual \
+  % character.  What I don't understand is why it works in the *value*
+  % of the xrdef.  Seems like it should be a catcode12 \, and that
+  % should not typeset properly.  But it works, so I'm moving on for
+  % now.  --karl, 15jan04.
+  \catcode`\\=\other
+  %
+  % Make the characters 128-255 be printing characters.
+  {%
+    \count1=128
+    \def\loop{%
+      \catcode\count1=\other
+      \advance\count1 by 1
+      \ifnum \count1<256 \loop \fi
+    }%
+  }%
+  %
+  % @ is our escape character in .aux files, and we need braces.
+  \catcode`\{=1
+  \catcode`\}=2
+  \catcode`\@=0
+}
+
+\def\readdatafile#1{%
+\begingroup
+  \setupdatafile
+  \input\jobname.#1
+\endgroup}
+
+
+\message{insertions,}
+% including footnotes.
+
+\newcount \footnoteno
+
+% The trailing space in the following definition for supereject is
+% vital for proper filling; pages come out unaligned when you do a
+% pagealignmacro call if that space before the closing brace is
+% removed. (Generally, numeric constants should always be followed by a
+% space to prevent strange expansion errors.)
+\def\supereject{\par\penalty -20000\footnoteno =0 }
+
+% @footnotestyle is meaningful for Info output only.
+\let\footnotestyle=\comment
+
+{\catcode `\@=11
+%
+% Auto-number footnotes.  Otherwise like plain.
+\gdef\footnote{%
+  \let\indent=\ptexindent
+  \let\noindent=\ptexnoindent
+  \global\advance\footnoteno by \@ne
+  \edef\thisfootno{$^{\the\footnoteno}$}%
+  %
+  % In case the footnote comes at the end of a sentence, preserve the
+  % extra spacing after we do the footnote number.
+  \let\@sf\empty
+  \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
+  %
+  % Remove inadvertent blank space before typesetting the footnote number.
+  \unskip
+  \thisfootno\@sf
+  \dofootnote
+}%
+
+% Don't bother with the trickery in plain.tex to not require the
+% footnote text as a parameter.  Our footnotes don't need to be so general.
+%
+% Oh yes, they do; otherwise, @ifset (and anything else that uses
+% \parseargline) fails inside footnotes because the tokens are fixed when
+% the footnote is read.  --karl, 16nov96.
+%
+\gdef\dofootnote{%
+  \insert\footins\bgroup
+  % We want to typeset this text as a normal paragraph, even if the
+  % footnote reference occurs in (for example) a display environment.
+  % So reset some parameters.
+  \hsize=\pagewidth
+  \interlinepenalty\interfootnotelinepenalty
+  \splittopskip\ht\strutbox % top baseline for broken footnotes
+  \splitmaxdepth\dp\strutbox
+  \floatingpenalty\@MM
+  \leftskip\z@skip
+  \rightskip\z@skip
+  \spaceskip\z@skip
+  \xspaceskip\z@skip
+  \parindent\defaultparindent
+  %
+  \smallfonts \rm
+  %
+  % Because we use hanging indentation in footnotes, a @noindent appears
+  % to exdent this text, so make it be a no-op.  makeinfo does not use
+  % hanging indentation so @noindent can still be needed within footnote
+  % text after an @example or the like (not that this is good style).
+  \let\noindent = \relax
+  %
+  % Hang the footnote text off the number.  Use \everypar in case the
+  % footnote extends for more than one paragraph.
+  \everypar = {\hang}%
+  \textindent{\thisfootno}%
+  %
+  % Don't crash into the line above the footnote text.  Since this
+  % expands into a box, it must come within the paragraph, lest it
+  % provide a place where TeX can split the footnote.
+  \footstrut
+  %
+  % Invoke rest of plain TeX footnote routine.
+  \futurelet\next\fo@t
+}
+}%end \catcode `\@=11
+
+% In case a @footnote appears in a vbox, save the footnote text and create
+% the real \insert just after the vbox finished.  Otherwise, the insertion
+% would be lost.
+% Similarly, if a @footnote appears inside an alignment, save the footnote
+% text to a box and make the \insert when a row of the table is finished.
+% And the same can be done for other insert classes.  --kasal, 16nov03.
+
+% Replace the \insert primitive by a cheating macro.
+% Deeper inside, just make sure that the saved insertions are not spilled
+% out prematurely.
+%
+\def\startsavinginserts{%
+  \ifx \insert\ptexinsert
+    \let\insert\saveinsert
+  \else
+    \let\checkinserts\relax
+  \fi
+}
+
+% This \insert replacement works for both \insert\footins{foo} and
+% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
+%
+\def\saveinsert#1{%
+  \edef\next{\noexpand\savetobox \makeSAVEname#1}%
+  \afterassignment\next
+  % swallow the left brace
+  \let\temp =
+}
+\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
+\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
+
+\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
+
+\def\placesaveins#1{%
+  \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
+    {\box#1}%
+}
+
+% eat @SAVE -- beware, all of them have catcode \other:
+{
+  \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials  %  ;-)
+  \gdef\gobblesave @SAVE{}
+}
+
+% initialization:
+\def\newsaveins #1{%
+  \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
+  \next
+}
+\def\newsaveinsX #1{%
+  \csname newbox\endcsname #1%
+  \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
+    \checksaveins #1}%
+}
+
+% initialize:
+\let\checkinserts\empty
+\newsaveins\footins
+\newsaveins\margin
+
+
+% @image.  We use the macros from epsf.tex to support this.
+% If epsf.tex is not installed and @image is used, we complain.
+%
+% Check for and read epsf.tex up front.  If we read it only at @image
+% time, we might be inside a group, and then its definitions would get
+% undone and the next image would fail.
+\openin 1 = epsf.tex
+\ifeof 1 \else
+  % Do not bother showing banner with epsf.tex v2.7k (available in
+  % doc/epsf.tex and on ctan).
+  \def\epsfannounce{\toks0 = }%
+  \input epsf.tex
+\fi
+\closein 1
+%
+% We will only complain once about lack of epsf.tex.
+\newif\ifwarnednoepsf
+\newhelp\noepsfhelp{epsf.tex must be installed for images to
+  work.  It is also included in the Texinfo distribution, or you can get
+  it from ftp://tug.org/tex/epsf.tex.}
+%
+\def\image#1{%
+  \ifx\epsfbox\thisisundefined
+    \ifwarnednoepsf \else
+      \errhelp = \noepsfhelp
+      \errmessage{epsf.tex not found, images will be ignored}%
+      \global\warnednoepsftrue
+    \fi
+  \else
+    \imagexxx #1,,,,,\finish
+  \fi
+}
+%
+% Arguments to @image:
+% #1 is (mandatory) image filename; we tack on .eps extension.
+% #2 is (optional) width, #3 is (optional) height.
+% #4 is (ignored optional) html alt text.
+% #5 is (ignored optional) extension.
+% #6 is just the usual extra ignored arg for parsing stuff.
+\newif\ifimagevmode
+\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
+  \catcode`\^^M = 5     % in case we're inside an example
+  \normalturnoffactive  % allow _ et al. in names
+  % If the image is by itself, center it.
+  \ifvmode
+    \imagevmodetrue
+  \else \ifx\centersub\centerV
+    % for @center @image, we need a vbox so we can have our vertical space
+    \imagevmodetrue
+    \vbox\bgroup % vbox has better behavior than vtop herev
+  \fi\fi
+  %
+  \ifimagevmode
+    \nobreak\medskip
+    % Usually we'll have text after the image which will insert
+    % \parskip glue, so insert it here too to equalize the space
+    % above and below.
+    \nobreak\vskip\parskip
+    \nobreak
+  \fi
+  %
+  % Leave vertical mode so that indentation from an enclosing
+  %  environment such as @quotation is respected.
+  % However, if we're at the top level, we don't want the
+  %  normal paragraph indentation.
+  % On the other hand, if we are in the case of @center @image, we don't
+  %  want to start a paragraph, which will create a hsize-width box and
+  %  eradicate the centering.
+  \ifx\centersub\centerV\else \noindent \fi
+  %
+  % Output the image.
+  \ifpdf
+    \dopdfimage{#1}{#2}{#3}%
+  \else
+    % \epsfbox itself resets \epsf?size at each figure.
+    \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
+    \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
+    \epsfbox{#1.eps}%
+  \fi
+  %
+  \ifimagevmode
+    \medskip  % space after a standalone image
+  \fi  
+  \ifx\centersub\centerV \egroup \fi
+\endgroup}
+
+
+% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
+% etc.  We don't actually implement floating yet, we always include the
+% float "here".  But it seemed the best name for the future.
+%
+\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
+
+% There may be a space before second and/or third parameter; delete it.
+\def\eatcommaspace#1, {#1,}
+
+% #1 is the optional FLOATTYPE, the text label for this float, typically
+% "Figure", "Table", "Example", etc.  Can't contain commas.  If omitted,
+% this float will not be numbered and cannot be referred to.
+%
+% #2 is the optional xref label.  Also must be present for the float to
+% be referable.
+%
+% #3 is the optional positioning argument; for now, it is ignored.  It
+% will somehow specify the positions allowed to float to (here, top, bottom).
+%
+% We keep a separate counter for each FLOATTYPE, which we reset at each
+% chapter-level command.
+\let\resetallfloatnos=\empty
+%
+\def\dofloat#1,#2,#3,#4\finish{%
+  \let\thiscaption=\empty
+  \let\thisshortcaption=\empty
+  %
+  % don't lose footnotes inside @float.
+  %
+  % BEWARE: when the floats start float, we have to issue warning whenever an
+  % insert appears inside a float which could possibly float. --kasal, 26may04
+  %
+  \startsavinginserts
+  %
+  % We can't be used inside a paragraph.
+  \par
+  %
+  \vtop\bgroup
+    \def\floattype{#1}%
+    \def\floatlabel{#2}%
+    \def\floatloc{#3}% we do nothing with this yet.
+    %
+    \ifx\floattype\empty
+      \let\safefloattype=\empty
+    \else
+      {%
+        % the floattype might have accents or other special characters,
+        % but we need to use it in a control sequence name.
+        \indexnofonts
+        \turnoffactive
+        \xdef\safefloattype{\floattype}%
+      }%
+    \fi
+    %
+    % If label is given but no type, we handle that as the empty type.
+    \ifx\floatlabel\empty \else
+      % We want each FLOATTYPE to be numbered separately (Figure 1,
+      % Table 1, Figure 2, ...).  (And if no label, no number.)
+      %
+      \expandafter\getfloatno\csname\safefloattype floatno\endcsname
+      \global\advance\floatno by 1
+      %
+      {%
+        % This magic value for \lastsection is output by \setref as the
+        % XREFLABEL-title value.  \xrefX uses it to distinguish float
+        % labels (which have a completely different output format) from
+        % node and anchor labels.  And \xrdef uses it to construct the
+        % lists of floats.
+        %
+        \edef\lastsection{\floatmagic=\safefloattype}%
+        \setref{\floatlabel}{Yfloat}%
+      }%
+    \fi
+    %
+    % start with \parskip glue, I guess.
+    \vskip\parskip
+    %
+    % Don't suppress indentation if a float happens to start a section.
+    \restorefirstparagraphindent
+}
+
+% we have these possibilities:
+% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
+% @float Foo,lbl & no caption:    Foo 1.1
+% @float Foo & @caption{Cap}:     Foo: Cap
+% @float Foo & no caption:        Foo
+% @float ,lbl & Caption{Cap}:     1.1: Cap
+% @float ,lbl & no caption:       1.1
+% @float & @caption{Cap}:         Cap
+% @float & no caption:
+%
+\def\Efloat{%
+    \let\floatident = \empty
+    %
+    % In all cases, if we have a float type, it comes first.
+    \ifx\floattype\empty \else \def\floatident{\floattype}\fi
+    %
+    % If we have an xref label, the number comes next.
+    \ifx\floatlabel\empty \else
+      \ifx\floattype\empty \else % if also had float type, need tie first.
+        \appendtomacro\floatident{\tie}%
+      \fi
+      % the number.
+      \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
+    \fi
+    %
+    % Start the printed caption with what we've constructed in
+    % \floatident, but keep it separate; we need \floatident again.
+    \let\captionline = \floatident
+    %
+    \ifx\thiscaption\empty \else
+      \ifx\floatident\empty \else
+	\appendtomacro\captionline{: }% had ident, so need a colon between
+      \fi
+      %
+      % caption text.
+      \appendtomacro\captionline{\scanexp\thiscaption}%
+    \fi
+    %
+    % If we have anything to print, print it, with space before.
+    % Eventually this needs to become an \insert.
+    \ifx\captionline\empty \else
+      \vskip.5\parskip
+      \captionline
+      %
+      % Space below caption.
+      \vskip\parskip
+    \fi
+    %
+    % If have an xref label, write the list of floats info.  Do this
+    % after the caption, to avoid chance of it being a breakpoint.
+    \ifx\floatlabel\empty \else
+      % Write the text that goes in the lof to the aux file as
+      % \floatlabel-lof.  Besides \floatident, we include the short
+      % caption if specified, else the full caption if specified, else nothing.
+      {%
+        \atdummies
+        %
+        % since we read the caption text in the macro world, where ^^M
+        % is turned into a normal character, we have to scan it back, so
+        % we don't write the literal three characters "^^M" into the aux file.
+	\scanexp{%
+	  \xdef\noexpand\gtemp{%
+	    \ifx\thisshortcaption\empty
+	      \thiscaption
+	    \else
+	      \thisshortcaption
+	    \fi
+	  }%
+	}%
+        \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
+	  \ifx\gtemp\empty \else : \gtemp \fi}}%
+      }%
+    \fi
+  \egroup  % end of \vtop
+  %
+  % place the captured inserts
+  %
+  % BEWARE: when the floats start floating, we have to issue warning
+  % whenever an insert appears inside a float which could possibly
+  % float. --kasal, 26may04
+  %
+  \checkinserts
+}
+
+% Append the tokens #2 to the definition of macro #1, not expanding either.
+%
+\def\appendtomacro#1#2{%
+  \expandafter\def\expandafter#1\expandafter{#1#2}%
+}
+
+% @caption, @shortcaption
+%
+\def\caption{\docaption\thiscaption}
+\def\shortcaption{\docaption\thisshortcaption}
+\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
+\def\defcaption#1#2{\egroup \def#1{#2}}
+
+% The parameter is the control sequence identifying the counter we are
+% going to use.  Create it if it doesn't exist and assign it to \floatno.
+\def\getfloatno#1{%
+  \ifx#1\relax
+      % Haven't seen this figure type before.
+      \csname newcount\endcsname #1%
+      %
+      % Remember to reset this floatno at the next chap.
+      \expandafter\gdef\expandafter\resetallfloatnos
+        \expandafter{\resetallfloatnos #1=0 }%
+  \fi
+  \let\floatno#1%
+}
+
+% \setref calls this to get the XREFLABEL-snt value.  We want an @xref
+% to the FLOATLABEL to expand to "Figure 3.1".  We call \setref when we
+% first read the @float command.
+%
+\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
+
+% Magic string used for the XREFLABEL-title value, so \xrefX can
+% distinguish floats from other xref types.
+\def\floatmagic{!!float!!}
+
+% #1 is the control sequence we are passed; we expand into a conditional
+% which is true if #1 represents a float ref.  That is, the magic
+% \lastsection value which we \setref above.
+%
+\def\iffloat#1{\expandafter\doiffloat#1==\finish}
+%
+% #1 is (maybe) the \floatmagic string.  If so, #2 will be the
+% (safe) float type for this float.  We set \iffloattype to #2.
+%
+\def\doiffloat#1=#2=#3\finish{%
+  \def\temp{#1}%
+  \def\iffloattype{#2}%
+  \ifx\temp\floatmagic
+}
+
+% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
+%
+\parseargdef\listoffloats{%
+  \def\floattype{#1}% floattype
+  {%
+    % the floattype might have accents or other special characters,
+    % but we need to use it in a control sequence name.
+    \indexnofonts
+    \turnoffactive
+    \xdef\safefloattype{\floattype}%
+  }%
+  %
+  % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
+  \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
+    \ifhavexrefs
+      % if the user said @listoffloats foo but never @float foo.
+      \message{\linenumber No `\safefloattype' floats to list.}%
+    \fi
+  \else
+    \begingroup
+      \leftskip=\tocindent  % indent these entries like a toc
+      \let\do=\listoffloatsdo
+      \csname floatlist\safefloattype\endcsname
+    \endgroup
+  \fi
+}
+
+% This is called on each entry in a list of floats.  We're passed the
+% xref label, in the form LABEL-title, which is how we save it in the
+% aux file.  We strip off the -title and look up \XRLABEL-lof, which
+% has the text we're supposed to typeset here.
+%
+% Figures without xref labels will not be included in the list (since
+% they won't appear in the aux file).
+%
+\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
+\def\listoffloatsdoentry#1-title\finish{{%
+  % Can't fully expand XR#1-lof because it can contain anything.  Just
+  % pass the control sequence.  On the other hand, XR#1-pg is just the
+  % page number, and we want to fully expand that so we can get a link
+  % in pdf output.
+  \toksA = \expandafter{\csname XR#1-lof\endcsname}%
+  %
+  % use the same \entry macro we use to generate the TOC and index.
+  \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
+  \writeentry
+}}
+
+
+\message{localization,}
+
+% For single-language documents, @documentlanguage is usually given very
+% early, just after @documentencoding.  Single argument is the language
+% (de) or locale (de_DE) abbreviation.
+%
+{
+  \catcode`\_ = \active
+  \globaldefs=1
+\parseargdef\documentlanguage{\begingroup
+  \let_=\normalunderscore  % normal _ character for filenames
+  \tex % read txi-??.tex file in plain TeX.
+    % Read the file by the name they passed if it exists.
+    \openin 1 txi-#1.tex
+    \ifeof 1
+      \documentlanguagetrywithoutunderscore{#1_\finish}%
+    \else
+      \globaldefs = 1  % everything in the txi-LL files needs to persist
+      \input txi-#1.tex
+    \fi
+    \closein 1
+  \endgroup % end raw TeX
+\endgroup}
+%
+% If they passed de_DE, and txi-de_DE.tex doesn't exist,
+% try txi-de.tex.
+%
+\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{%
+  \openin 1 txi-#1.tex
+  \ifeof 1
+    \errhelp = \nolanghelp
+    \errmessage{Cannot read language file txi-#1.tex}%
+  \else
+    \globaldefs = 1  % everything in the txi-LL files needs to persist
+    \input txi-#1.tex
+  \fi
+  \closein 1
+}
+}% end of special _ catcode
+%
+\newhelp\nolanghelp{The given language definition file cannot be found or
+is empty.  Maybe you need to install it?  Putting it in the current
+directory should work if nowhere else does.}
+
+% This macro is called from txi-??.tex files; the first argument is the
+% \language name to set (without the "\lang@" prefix), the second and
+% third args are \{left,right}hyphenmin.
+%
+% The language names to pass are determined when the format is built.
+% See the etex.log file created at that time, e.g.,
+% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log.
+%
+% With TeX Live 2008, etex now includes hyphenation patterns for all
+% available languages.  This means we can support hyphenation in
+% Texinfo, at least to some extent.  (This still doesn't solve the
+% accented characters problem.)
+%
+\catcode`@=11
+\def\txisetlanguage#1#2#3{%
+  % do not set the language if the name is undefined in the current TeX.
+  \expandafter\ifx\csname lang@#1\endcsname \relax
+    \message{no patterns for #1}%
+  \else
+    \global\language = \csname lang@#1\endcsname
+  \fi
+  % but there is no harm in adjusting the hyphenmin values regardless.
+  \global\lefthyphenmin = #2\relax
+  \global\righthyphenmin = #3\relax
+}
+
+% Helpers for encodings.
+% Set the catcode of characters 128 through 255 to the specified number.
+%
+\def\setnonasciicharscatcode#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \global\catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
+
+\def\setnonasciicharscatcodenonglobal#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
+
+% @documentencoding sets the definition of non-ASCII characters
+% according to the specified encoding.
+%
+\parseargdef\documentencoding{%
+  % Encoding being declared for the document.
+  \def\declaredencoding{\csname #1.enc\endcsname}%
+  %
+  % Supported encodings: names converted to tokens in order to be able
+  % to compare them with \ifx.
+  \def\ascii{\csname US-ASCII.enc\endcsname}%
+  \def\latnine{\csname ISO-8859-15.enc\endcsname}%
+  \def\latone{\csname ISO-8859-1.enc\endcsname}%
+  \def\lattwo{\csname ISO-8859-2.enc\endcsname}%
+  \def\utfeight{\csname UTF-8.enc\endcsname}%
+  %
+  \ifx \declaredencoding \ascii
+     \asciichardefs
+  %
+  \else \ifx \declaredencoding \lattwo
+     \setnonasciicharscatcode\active
+     \lattwochardefs
+  %
+  \else \ifx \declaredencoding \latone
+     \setnonasciicharscatcode\active
+     \latonechardefs
+  %
+  \else \ifx \declaredencoding \latnine
+     \setnonasciicharscatcode\active
+     \latninechardefs
+  %
+  \else \ifx \declaredencoding \utfeight
+     \setnonasciicharscatcode\active
+     \utfeightchardefs
+  %
+  \else
+    \message{Unknown document encoding #1, ignoring.}%
+  %
+  \fi % utfeight
+  \fi % latnine
+  \fi % latone
+  \fi % lattwo
+  \fi % ascii
+}
+
+% A message to be logged when using a character that isn't available
+% the default font encoding (OT1).
+%
+\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}}
+
+% Take account of \c (plain) vs. \, (Texinfo) difference.
+\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi}
+
+% First, make active non-ASCII characters in order for them to be
+% correctly categorized when TeX reads the replacement text of
+% macros containing the character definitions.
+\setnonasciicharscatcode\active
+%
+% Latin1 (ISO-8859-1) character definitions.
+\def\latonechardefs{%
+  \gdef^^a0{\tie}
+  \gdef^^a1{\exclamdown}
+  \gdef^^a2{\missingcharmsg{CENT SIGN}}
+  \gdef^^a3{{\pounds}}
+  \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+  \gdef^^a5{\missingcharmsg{YEN SIGN}}
+  \gdef^^a6{\missingcharmsg{BROKEN BAR}}
+  \gdef^^a7{\S}
+  \gdef^^a8{\"{}}
+  \gdef^^a9{\copyright}
+  \gdef^^aa{\ordf}
+  \gdef^^ab{\guillemetleft}
+  \gdef^^ac{$\lnot$}
+  \gdef^^ad{\-}
+  \gdef^^ae{\registeredsymbol}
+  \gdef^^af{\={}}
+  %
+  \gdef^^b0{\textdegree}
+  \gdef^^b1{$\pm$}
+  \gdef^^b2{$^2$}
+  \gdef^^b3{$^3$}
+  \gdef^^b4{\'{}}
+  \gdef^^b5{$\mu$}
+  \gdef^^b6{\P}
+  %
+  \gdef^^b7{$^.$}
+  \gdef^^b8{\cedilla\ }
+  \gdef^^b9{$^1$}
+  \gdef^^ba{\ordm}
+  %
+  \gdef^^bb{\guillemetright}
+  \gdef^^bc{$1\over4$}
+  \gdef^^bd{$1\over2$}
+  \gdef^^be{$3\over4$}
+  \gdef^^bf{\questiondown}
+  %
+  \gdef^^c0{\`A}
+  \gdef^^c1{\'A}
+  \gdef^^c2{\^A}
+  \gdef^^c3{\~A}
+  \gdef^^c4{\"A}
+  \gdef^^c5{\ringaccent A}
+  \gdef^^c6{\AE}
+  \gdef^^c7{\cedilla C}
+  \gdef^^c8{\`E}
+  \gdef^^c9{\'E}
+  \gdef^^ca{\^E}
+  \gdef^^cb{\"E}
+  \gdef^^cc{\`I}
+  \gdef^^cd{\'I}
+  \gdef^^ce{\^I}
+  \gdef^^cf{\"I}
+  %
+  \gdef^^d0{\DH}
+  \gdef^^d1{\~N}
+  \gdef^^d2{\`O}
+  \gdef^^d3{\'O}
+  \gdef^^d4{\^O}
+  \gdef^^d5{\~O}
+  \gdef^^d6{\"O}
+  \gdef^^d7{$\times$}
+  \gdef^^d8{\O}
+  \gdef^^d9{\`U}
+  \gdef^^da{\'U}
+  \gdef^^db{\^U}
+  \gdef^^dc{\"U}
+  \gdef^^dd{\'Y}
+  \gdef^^de{\TH}
+  \gdef^^df{\ss}
+  %
+  \gdef^^e0{\`a}
+  \gdef^^e1{\'a}
+  \gdef^^e2{\^a}
+  \gdef^^e3{\~a}
+  \gdef^^e4{\"a}
+  \gdef^^e5{\ringaccent a}
+  \gdef^^e6{\ae}
+  \gdef^^e7{\cedilla c}
+  \gdef^^e8{\`e}
+  \gdef^^e9{\'e}
+  \gdef^^ea{\^e}
+  \gdef^^eb{\"e}
+  \gdef^^ec{\`{\dotless i}}
+  \gdef^^ed{\'{\dotless i}}
+  \gdef^^ee{\^{\dotless i}}
+  \gdef^^ef{\"{\dotless i}}
+  %
+  \gdef^^f0{\dh}
+  \gdef^^f1{\~n}
+  \gdef^^f2{\`o}
+  \gdef^^f3{\'o}
+  \gdef^^f4{\^o}
+  \gdef^^f5{\~o}
+  \gdef^^f6{\"o}
+  \gdef^^f7{$\div$}
+  \gdef^^f8{\o}
+  \gdef^^f9{\`u}
+  \gdef^^fa{\'u}
+  \gdef^^fb{\^u}
+  \gdef^^fc{\"u}
+  \gdef^^fd{\'y}
+  \gdef^^fe{\th}
+  \gdef^^ff{\"y}
+}
+
+% Latin9 (ISO-8859-15) encoding character definitions.
+\def\latninechardefs{%
+  % Encoding is almost identical to Latin1.
+  \latonechardefs
+  %
+  \gdef^^a4{\euro}
+  \gdef^^a6{\v S}
+  \gdef^^a8{\v s}
+  \gdef^^b4{\v Z}
+  \gdef^^b8{\v z}
+  \gdef^^bc{\OE}
+  \gdef^^bd{\oe}
+  \gdef^^be{\"Y}
+}
+
+% Latin2 (ISO-8859-2) character definitions.
+\def\lattwochardefs{%
+  \gdef^^a0{\tie}
+  \gdef^^a1{\ogonek{A}}
+  \gdef^^a2{\u{}}
+  \gdef^^a3{\L}
+  \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+  \gdef^^a5{\v L}
+  \gdef^^a6{\'S}
+  \gdef^^a7{\S}
+  \gdef^^a8{\"{}}
+  \gdef^^a9{\v S}
+  \gdef^^aa{\cedilla S}
+  \gdef^^ab{\v T}
+  \gdef^^ac{\'Z}
+  \gdef^^ad{\-}
+  \gdef^^ae{\v Z}
+  \gdef^^af{\dotaccent Z}
+  %
+  \gdef^^b0{\textdegree}
+  \gdef^^b1{\ogonek{a}}
+  \gdef^^b2{\ogonek{ }}
+  \gdef^^b3{\l}
+  \gdef^^b4{\'{}}
+  \gdef^^b5{\v l}
+  \gdef^^b6{\'s}
+  \gdef^^b7{\v{}}
+  \gdef^^b8{\cedilla\ }
+  \gdef^^b9{\v s}
+  \gdef^^ba{\cedilla s}
+  \gdef^^bb{\v t}
+  \gdef^^bc{\'z}
+  \gdef^^bd{\H{}}
+  \gdef^^be{\v z}
+  \gdef^^bf{\dotaccent z}
+  %
+  \gdef^^c0{\'R}
+  \gdef^^c1{\'A}
+  \gdef^^c2{\^A}
+  \gdef^^c3{\u A}
+  \gdef^^c4{\"A}
+  \gdef^^c5{\'L}
+  \gdef^^c6{\'C}
+  \gdef^^c7{\cedilla C}
+  \gdef^^c8{\v C}
+  \gdef^^c9{\'E}
+  \gdef^^ca{\ogonek{E}}
+  \gdef^^cb{\"E}
+  \gdef^^cc{\v E}
+  \gdef^^cd{\'I}
+  \gdef^^ce{\^I}
+  \gdef^^cf{\v D}
+  %
+  \gdef^^d0{\DH}
+  \gdef^^d1{\'N}
+  \gdef^^d2{\v N}
+  \gdef^^d3{\'O}
+  \gdef^^d4{\^O}
+  \gdef^^d5{\H O}
+  \gdef^^d6{\"O}
+  \gdef^^d7{$\times$}
+  \gdef^^d8{\v R}
+  \gdef^^d9{\ringaccent U}
+  \gdef^^da{\'U}
+  \gdef^^db{\H U}
+  \gdef^^dc{\"U}
+  \gdef^^dd{\'Y}
+  \gdef^^de{\cedilla T}
+  \gdef^^df{\ss}
+  %
+  \gdef^^e0{\'r}
+  \gdef^^e1{\'a}
+  \gdef^^e2{\^a}
+  \gdef^^e3{\u a}
+  \gdef^^e4{\"a}
+  \gdef^^e5{\'l}
+  \gdef^^e6{\'c}
+  \gdef^^e7{\cedilla c}
+  \gdef^^e8{\v c}
+  \gdef^^e9{\'e}
+  \gdef^^ea{\ogonek{e}}
+  \gdef^^eb{\"e}
+  \gdef^^ec{\v e}
+  \gdef^^ed{\'{\dotless{i}}}
+  \gdef^^ee{\^{\dotless{i}}}
+  \gdef^^ef{\v d}
+  %
+  \gdef^^f0{\dh}
+  \gdef^^f1{\'n}
+  \gdef^^f2{\v n}
+  \gdef^^f3{\'o}
+  \gdef^^f4{\^o}
+  \gdef^^f5{\H o}
+  \gdef^^f6{\"o}
+  \gdef^^f7{$\div$}
+  \gdef^^f8{\v r}
+  \gdef^^f9{\ringaccent u}
+  \gdef^^fa{\'u}
+  \gdef^^fb{\H u}
+  \gdef^^fc{\"u}
+  \gdef^^fd{\'y}
+  \gdef^^fe{\cedilla t}
+  \gdef^^ff{\dotaccent{}}
+}
+
+% UTF-8 character definitions.
+%
+% This code to support UTF-8 is based on LaTeX's utf8.def, with some
+% changes for Texinfo conventions.  It is included here under the GPL by
+% permission from Frank Mittelbach and the LaTeX team.
+%
+\newcount\countUTFx
+\newcount\countUTFy
+\newcount\countUTFz
+
+\gdef\UTFviiiTwoOctets#1#2{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\endcsname}
+%
+\gdef\UTFviiiThreeOctets#1#2#3{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname}
+%
+\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname}
+
+\gdef\UTFviiiDefined#1{%
+  \ifx #1\relax
+    \message{\linenumber Unicode char \string #1 not defined for Texinfo}%
+  \else
+    \expandafter #1%
+  \fi
+}
+
+\begingroup
+  \catcode`\~13
+  \catcode`\"12
+
+  \def\UTFviiiLoop{%
+    \global\catcode\countUTFx\active
+    \uccode`\~\countUTFx
+    \uppercase\expandafter{\UTFviiiTmp}%
+    \advance\countUTFx by 1
+    \ifnum\countUTFx < \countUTFy
+      \expandafter\UTFviiiLoop
+    \fi}
+
+  \countUTFx = "C2
+  \countUTFy = "E0
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiTwoOctets\string~}}
+  \UTFviiiLoop
+
+  \countUTFx = "E0
+  \countUTFy = "F0
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiThreeOctets\string~}}
+  \UTFviiiLoop
+
+  \countUTFx = "F0
+  \countUTFy = "F4
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiFourOctets\string~}}
+  \UTFviiiLoop
+\endgroup
+
+\begingroup
+  \catcode`\"=12
+  \catcode`\<=12
+  \catcode`\.=12
+  \catcode`\,=12
+  \catcode`\;=12
+  \catcode`\!=12
+  \catcode`\~=13
+
+  \gdef\DeclareUnicodeCharacter#1#2{%
+    \countUTFz = "#1\relax
+    %\wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}%
+    \begingroup
+      \parseXMLCharref
+      \def\UTFviiiTwoOctets##1##2{%
+        \csname u8:##1\string ##2\endcsname}%
+      \def\UTFviiiThreeOctets##1##2##3{%
+        \csname u8:##1\string ##2\string ##3\endcsname}%
+      \def\UTFviiiFourOctets##1##2##3##4{%
+        \csname u8:##1\string ##2\string ##3\string ##4\endcsname}%
+      \expandafter\expandafter\expandafter\expandafter
+       \expandafter\expandafter\expandafter
+       \gdef\UTFviiiTmp{#2}%
+    \endgroup}
+
+  \gdef\parseXMLCharref{%
+    \ifnum\countUTFz < "A0\relax
+      \errhelp = \EMsimple
+      \errmessage{Cannot define Unicode char value < 00A0}%
+    \else\ifnum\countUTFz < "800\relax
+      \parseUTFviiiA,%
+      \parseUTFviiiB C\UTFviiiTwoOctets.,%
+    \else\ifnum\countUTFz < "10000\relax
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiB E\UTFviiiThreeOctets.{,;}%
+    \else
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiA!%
+      \parseUTFviiiB F\UTFviiiFourOctets.{!,;}%
+    \fi\fi\fi
+  }
+
+  \gdef\parseUTFviiiA#1{%
+    \countUTFx = \countUTFz
+    \divide\countUTFz by 64
+    \countUTFy = \countUTFz
+    \multiply\countUTFz by 64
+    \advance\countUTFx by -\countUTFz
+    \advance\countUTFx by 128
+    \uccode `#1\countUTFx
+    \countUTFz = \countUTFy}
+
+  \gdef\parseUTFviiiB#1#2#3#4{%
+    \advance\countUTFz by "#10\relax
+    \uccode `#3\countUTFz
+    \uppercase{\gdef\UTFviiiTmp{#2#3#4}}}
+\endgroup
+
+\def\utfeightchardefs{%
+  \DeclareUnicodeCharacter{00A0}{\tie}
+  \DeclareUnicodeCharacter{00A1}{\exclamdown}
+  \DeclareUnicodeCharacter{00A3}{\pounds}
+  \DeclareUnicodeCharacter{00A8}{\"{ }}
+  \DeclareUnicodeCharacter{00A9}{\copyright}
+  \DeclareUnicodeCharacter{00AA}{\ordf}
+  \DeclareUnicodeCharacter{00AB}{\guillemetleft}
+  \DeclareUnicodeCharacter{00AD}{\-}
+  \DeclareUnicodeCharacter{00AE}{\registeredsymbol}
+  \DeclareUnicodeCharacter{00AF}{\={ }}
+
+  \DeclareUnicodeCharacter{00B0}{\ringaccent{ }}
+  \DeclareUnicodeCharacter{00B4}{\'{ }}
+  \DeclareUnicodeCharacter{00B8}{\cedilla{ }}
+  \DeclareUnicodeCharacter{00BA}{\ordm}
+  \DeclareUnicodeCharacter{00BB}{\guillemetright}
+  \DeclareUnicodeCharacter{00BF}{\questiondown}
+
+  \DeclareUnicodeCharacter{00C0}{\`A}
+  \DeclareUnicodeCharacter{00C1}{\'A}
+  \DeclareUnicodeCharacter{00C2}{\^A}
+  \DeclareUnicodeCharacter{00C3}{\~A}
+  \DeclareUnicodeCharacter{00C4}{\"A}
+  \DeclareUnicodeCharacter{00C5}{\AA}
+  \DeclareUnicodeCharacter{00C6}{\AE}
+  \DeclareUnicodeCharacter{00C7}{\cedilla{C}}
+  \DeclareUnicodeCharacter{00C8}{\`E}
+  \DeclareUnicodeCharacter{00C9}{\'E}
+  \DeclareUnicodeCharacter{00CA}{\^E}
+  \DeclareUnicodeCharacter{00CB}{\"E}
+  \DeclareUnicodeCharacter{00CC}{\`I}
+  \DeclareUnicodeCharacter{00CD}{\'I}
+  \DeclareUnicodeCharacter{00CE}{\^I}
+  \DeclareUnicodeCharacter{00CF}{\"I}
+
+  \DeclareUnicodeCharacter{00D0}{\DH}
+  \DeclareUnicodeCharacter{00D1}{\~N}
+  \DeclareUnicodeCharacter{00D2}{\`O}
+  \DeclareUnicodeCharacter{00D3}{\'O}
+  \DeclareUnicodeCharacter{00D4}{\^O}
+  \DeclareUnicodeCharacter{00D5}{\~O}
+  \DeclareUnicodeCharacter{00D6}{\"O}
+  \DeclareUnicodeCharacter{00D8}{\O}
+  \DeclareUnicodeCharacter{00D9}{\`U}
+  \DeclareUnicodeCharacter{00DA}{\'U}
+  \DeclareUnicodeCharacter{00DB}{\^U}
+  \DeclareUnicodeCharacter{00DC}{\"U}
+  \DeclareUnicodeCharacter{00DD}{\'Y}
+  \DeclareUnicodeCharacter{00DE}{\TH}
+  \DeclareUnicodeCharacter{00DF}{\ss}
+
+  \DeclareUnicodeCharacter{00E0}{\`a}
+  \DeclareUnicodeCharacter{00E1}{\'a}
+  \DeclareUnicodeCharacter{00E2}{\^a}
+  \DeclareUnicodeCharacter{00E3}{\~a}
+  \DeclareUnicodeCharacter{00E4}{\"a}
+  \DeclareUnicodeCharacter{00E5}{\aa}
+  \DeclareUnicodeCharacter{00E6}{\ae}
+  \DeclareUnicodeCharacter{00E7}{\cedilla{c}}
+  \DeclareUnicodeCharacter{00E8}{\`e}
+  \DeclareUnicodeCharacter{00E9}{\'e}
+  \DeclareUnicodeCharacter{00EA}{\^e}
+  \DeclareUnicodeCharacter{00EB}{\"e}
+  \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}}
+  \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}}
+  \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}}
+  \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}}
+
+  \DeclareUnicodeCharacter{00F0}{\dh}
+  \DeclareUnicodeCharacter{00F1}{\~n}
+  \DeclareUnicodeCharacter{00F2}{\`o}
+  \DeclareUnicodeCharacter{00F3}{\'o}
+  \DeclareUnicodeCharacter{00F4}{\^o}
+  \DeclareUnicodeCharacter{00F5}{\~o}
+  \DeclareUnicodeCharacter{00F6}{\"o}
+  \DeclareUnicodeCharacter{00F8}{\o}
+  \DeclareUnicodeCharacter{00F9}{\`u}
+  \DeclareUnicodeCharacter{00FA}{\'u}
+  \DeclareUnicodeCharacter{00FB}{\^u}
+  \DeclareUnicodeCharacter{00FC}{\"u}
+  \DeclareUnicodeCharacter{00FD}{\'y}
+  \DeclareUnicodeCharacter{00FE}{\th}
+  \DeclareUnicodeCharacter{00FF}{\"y}
+
+  \DeclareUnicodeCharacter{0100}{\=A}
+  \DeclareUnicodeCharacter{0101}{\=a}
+  \DeclareUnicodeCharacter{0102}{\u{A}}
+  \DeclareUnicodeCharacter{0103}{\u{a}}
+  \DeclareUnicodeCharacter{0104}{\ogonek{A}}
+  \DeclareUnicodeCharacter{0105}{\ogonek{a}}
+  \DeclareUnicodeCharacter{0106}{\'C}
+  \DeclareUnicodeCharacter{0107}{\'c}
+  \DeclareUnicodeCharacter{0108}{\^C}
+  \DeclareUnicodeCharacter{0109}{\^c}
+  \DeclareUnicodeCharacter{0118}{\ogonek{E}}
+  \DeclareUnicodeCharacter{0119}{\ogonek{e}}
+  \DeclareUnicodeCharacter{010A}{\dotaccent{C}}
+  \DeclareUnicodeCharacter{010B}{\dotaccent{c}}
+  \DeclareUnicodeCharacter{010C}{\v{C}}
+  \DeclareUnicodeCharacter{010D}{\v{c}}
+  \DeclareUnicodeCharacter{010E}{\v{D}}
+
+  \DeclareUnicodeCharacter{0112}{\=E}
+  \DeclareUnicodeCharacter{0113}{\=e}
+  \DeclareUnicodeCharacter{0114}{\u{E}}
+  \DeclareUnicodeCharacter{0115}{\u{e}}
+  \DeclareUnicodeCharacter{0116}{\dotaccent{E}}
+  \DeclareUnicodeCharacter{0117}{\dotaccent{e}}
+  \DeclareUnicodeCharacter{011A}{\v{E}}
+  \DeclareUnicodeCharacter{011B}{\v{e}}
+  \DeclareUnicodeCharacter{011C}{\^G}
+  \DeclareUnicodeCharacter{011D}{\^g}
+  \DeclareUnicodeCharacter{011E}{\u{G}}
+  \DeclareUnicodeCharacter{011F}{\u{g}}
+
+  \DeclareUnicodeCharacter{0120}{\dotaccent{G}}
+  \DeclareUnicodeCharacter{0121}{\dotaccent{g}}
+  \DeclareUnicodeCharacter{0124}{\^H}
+  \DeclareUnicodeCharacter{0125}{\^h}
+  \DeclareUnicodeCharacter{0128}{\~I}
+  \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}}
+  \DeclareUnicodeCharacter{012A}{\=I}
+  \DeclareUnicodeCharacter{012B}{\={\dotless{i}}}
+  \DeclareUnicodeCharacter{012C}{\u{I}}
+  \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}}
+
+  \DeclareUnicodeCharacter{0130}{\dotaccent{I}}
+  \DeclareUnicodeCharacter{0131}{\dotless{i}}
+  \DeclareUnicodeCharacter{0132}{IJ}
+  \DeclareUnicodeCharacter{0133}{ij}
+  \DeclareUnicodeCharacter{0134}{\^J}
+  \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}}
+  \DeclareUnicodeCharacter{0139}{\'L}
+  \DeclareUnicodeCharacter{013A}{\'l}
+
+  \DeclareUnicodeCharacter{0141}{\L}
+  \DeclareUnicodeCharacter{0142}{\l}
+  \DeclareUnicodeCharacter{0143}{\'N}
+  \DeclareUnicodeCharacter{0144}{\'n}
+  \DeclareUnicodeCharacter{0147}{\v{N}}
+  \DeclareUnicodeCharacter{0148}{\v{n}}
+  \DeclareUnicodeCharacter{014C}{\=O}
+  \DeclareUnicodeCharacter{014D}{\=o}
+  \DeclareUnicodeCharacter{014E}{\u{O}}
+  \DeclareUnicodeCharacter{014F}{\u{o}}
+
+  \DeclareUnicodeCharacter{0150}{\H{O}}
+  \DeclareUnicodeCharacter{0151}{\H{o}}
+  \DeclareUnicodeCharacter{0152}{\OE}
+  \DeclareUnicodeCharacter{0153}{\oe}
+  \DeclareUnicodeCharacter{0154}{\'R}
+  \DeclareUnicodeCharacter{0155}{\'r}
+  \DeclareUnicodeCharacter{0158}{\v{R}}
+  \DeclareUnicodeCharacter{0159}{\v{r}}
+  \DeclareUnicodeCharacter{015A}{\'S}
+  \DeclareUnicodeCharacter{015B}{\'s}
+  \DeclareUnicodeCharacter{015C}{\^S}
+  \DeclareUnicodeCharacter{015D}{\^s}
+  \DeclareUnicodeCharacter{015E}{\cedilla{S}}
+  \DeclareUnicodeCharacter{015F}{\cedilla{s}}
+
+  \DeclareUnicodeCharacter{0160}{\v{S}}
+  \DeclareUnicodeCharacter{0161}{\v{s}}
+  \DeclareUnicodeCharacter{0162}{\cedilla{t}}
+  \DeclareUnicodeCharacter{0163}{\cedilla{T}}
+  \DeclareUnicodeCharacter{0164}{\v{T}}
+
+  \DeclareUnicodeCharacter{0168}{\~U}
+  \DeclareUnicodeCharacter{0169}{\~u}
+  \DeclareUnicodeCharacter{016A}{\=U}
+  \DeclareUnicodeCharacter{016B}{\=u}
+  \DeclareUnicodeCharacter{016C}{\u{U}}
+  \DeclareUnicodeCharacter{016D}{\u{u}}
+  \DeclareUnicodeCharacter{016E}{\ringaccent{U}}
+  \DeclareUnicodeCharacter{016F}{\ringaccent{u}}
+
+  \DeclareUnicodeCharacter{0170}{\H{U}}
+  \DeclareUnicodeCharacter{0171}{\H{u}}
+  \DeclareUnicodeCharacter{0174}{\^W}
+  \DeclareUnicodeCharacter{0175}{\^w}
+  \DeclareUnicodeCharacter{0176}{\^Y}
+  \DeclareUnicodeCharacter{0177}{\^y}
+  \DeclareUnicodeCharacter{0178}{\"Y}
+  \DeclareUnicodeCharacter{0179}{\'Z}
+  \DeclareUnicodeCharacter{017A}{\'z}
+  \DeclareUnicodeCharacter{017B}{\dotaccent{Z}}
+  \DeclareUnicodeCharacter{017C}{\dotaccent{z}}
+  \DeclareUnicodeCharacter{017D}{\v{Z}}
+  \DeclareUnicodeCharacter{017E}{\v{z}}
+
+  \DeclareUnicodeCharacter{01C4}{D\v{Z}}
+  \DeclareUnicodeCharacter{01C5}{D\v{z}}
+  \DeclareUnicodeCharacter{01C6}{d\v{z}}
+  \DeclareUnicodeCharacter{01C7}{LJ}
+  \DeclareUnicodeCharacter{01C8}{Lj}
+  \DeclareUnicodeCharacter{01C9}{lj}
+  \DeclareUnicodeCharacter{01CA}{NJ}
+  \DeclareUnicodeCharacter{01CB}{Nj}
+  \DeclareUnicodeCharacter{01CC}{nj}
+  \DeclareUnicodeCharacter{01CD}{\v{A}}
+  \DeclareUnicodeCharacter{01CE}{\v{a}}
+  \DeclareUnicodeCharacter{01CF}{\v{I}}
+
+  \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}}
+  \DeclareUnicodeCharacter{01D1}{\v{O}}
+  \DeclareUnicodeCharacter{01D2}{\v{o}}
+  \DeclareUnicodeCharacter{01D3}{\v{U}}
+  \DeclareUnicodeCharacter{01D4}{\v{u}}
+
+  \DeclareUnicodeCharacter{01E2}{\={\AE}}
+  \DeclareUnicodeCharacter{01E3}{\={\ae}}
+  \DeclareUnicodeCharacter{01E6}{\v{G}}
+  \DeclareUnicodeCharacter{01E7}{\v{g}}
+  \DeclareUnicodeCharacter{01E8}{\v{K}}
+  \DeclareUnicodeCharacter{01E9}{\v{k}}
+
+  \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}}
+  \DeclareUnicodeCharacter{01F1}{DZ}
+  \DeclareUnicodeCharacter{01F2}{Dz}
+  \DeclareUnicodeCharacter{01F3}{dz}
+  \DeclareUnicodeCharacter{01F4}{\'G}
+  \DeclareUnicodeCharacter{01F5}{\'g}
+  \DeclareUnicodeCharacter{01F8}{\`N}
+  \DeclareUnicodeCharacter{01F9}{\`n}
+  \DeclareUnicodeCharacter{01FC}{\'{\AE}}
+  \DeclareUnicodeCharacter{01FD}{\'{\ae}}
+  \DeclareUnicodeCharacter{01FE}{\'{\O}}
+  \DeclareUnicodeCharacter{01FF}{\'{\o}}
+
+  \DeclareUnicodeCharacter{021E}{\v{H}}
+  \DeclareUnicodeCharacter{021F}{\v{h}}
+
+  \DeclareUnicodeCharacter{0226}{\dotaccent{A}}
+  \DeclareUnicodeCharacter{0227}{\dotaccent{a}}
+  \DeclareUnicodeCharacter{0228}{\cedilla{E}}
+  \DeclareUnicodeCharacter{0229}{\cedilla{e}}
+  \DeclareUnicodeCharacter{022E}{\dotaccent{O}}
+  \DeclareUnicodeCharacter{022F}{\dotaccent{o}}
+
+  \DeclareUnicodeCharacter{0232}{\=Y}
+  \DeclareUnicodeCharacter{0233}{\=y}
+  \DeclareUnicodeCharacter{0237}{\dotless{j}}
+
+  \DeclareUnicodeCharacter{02DB}{\ogonek{ }}
+
+  \DeclareUnicodeCharacter{1E02}{\dotaccent{B}}
+  \DeclareUnicodeCharacter{1E03}{\dotaccent{b}}
+  \DeclareUnicodeCharacter{1E04}{\udotaccent{B}}
+  \DeclareUnicodeCharacter{1E05}{\udotaccent{b}}
+  \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}}
+  \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}}
+  \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}}
+  \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}}
+  \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}}
+  \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}}
+  \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}}
+  \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}}
+
+  \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}}
+  \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}}
+
+  \DeclareUnicodeCharacter{1E20}{\=G}
+  \DeclareUnicodeCharacter{1E21}{\=g}
+  \DeclareUnicodeCharacter{1E22}{\dotaccent{H}}
+  \DeclareUnicodeCharacter{1E23}{\dotaccent{h}}
+  \DeclareUnicodeCharacter{1E24}{\udotaccent{H}}
+  \DeclareUnicodeCharacter{1E25}{\udotaccent{h}}
+  \DeclareUnicodeCharacter{1E26}{\"H}
+  \DeclareUnicodeCharacter{1E27}{\"h}
+
+  \DeclareUnicodeCharacter{1E30}{\'K}
+  \DeclareUnicodeCharacter{1E31}{\'k}
+  \DeclareUnicodeCharacter{1E32}{\udotaccent{K}}
+  \DeclareUnicodeCharacter{1E33}{\udotaccent{k}}
+  \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}}
+  \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}}
+  \DeclareUnicodeCharacter{1E36}{\udotaccent{L}}
+  \DeclareUnicodeCharacter{1E37}{\udotaccent{l}}
+  \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}}
+  \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}}
+  \DeclareUnicodeCharacter{1E3E}{\'M}
+  \DeclareUnicodeCharacter{1E3F}{\'m}
+
+  \DeclareUnicodeCharacter{1E40}{\dotaccent{M}}
+  \DeclareUnicodeCharacter{1E41}{\dotaccent{m}}
+  \DeclareUnicodeCharacter{1E42}{\udotaccent{M}}
+  \DeclareUnicodeCharacter{1E43}{\udotaccent{m}}
+  \DeclareUnicodeCharacter{1E44}{\dotaccent{N}}
+  \DeclareUnicodeCharacter{1E45}{\dotaccent{n}}
+  \DeclareUnicodeCharacter{1E46}{\udotaccent{N}}
+  \DeclareUnicodeCharacter{1E47}{\udotaccent{n}}
+  \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}}
+  \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}}
+
+  \DeclareUnicodeCharacter{1E54}{\'P}
+  \DeclareUnicodeCharacter{1E55}{\'p}
+  \DeclareUnicodeCharacter{1E56}{\dotaccent{P}}
+  \DeclareUnicodeCharacter{1E57}{\dotaccent{p}}
+  \DeclareUnicodeCharacter{1E58}{\dotaccent{R}}
+  \DeclareUnicodeCharacter{1E59}{\dotaccent{r}}
+  \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}}
+  \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}}
+  \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}}
+  \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}}
+
+  \DeclareUnicodeCharacter{1E60}{\dotaccent{S}}
+  \DeclareUnicodeCharacter{1E61}{\dotaccent{s}}
+  \DeclareUnicodeCharacter{1E62}{\udotaccent{S}}
+  \DeclareUnicodeCharacter{1E63}{\udotaccent{s}}
+  \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}}
+  \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}}
+  \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}}
+  \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}}
+  \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}}
+  \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}}
+
+  \DeclareUnicodeCharacter{1E7C}{\~V}
+  \DeclareUnicodeCharacter{1E7D}{\~v}
+  \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}}
+  \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}}
+
+  \DeclareUnicodeCharacter{1E80}{\`W}
+  \DeclareUnicodeCharacter{1E81}{\`w}
+  \DeclareUnicodeCharacter{1E82}{\'W}
+  \DeclareUnicodeCharacter{1E83}{\'w}
+  \DeclareUnicodeCharacter{1E84}{\"W}
+  \DeclareUnicodeCharacter{1E85}{\"w}
+  \DeclareUnicodeCharacter{1E86}{\dotaccent{W}}
+  \DeclareUnicodeCharacter{1E87}{\dotaccent{w}}
+  \DeclareUnicodeCharacter{1E88}{\udotaccent{W}}
+  \DeclareUnicodeCharacter{1E89}{\udotaccent{w}}
+  \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}}
+  \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}}
+  \DeclareUnicodeCharacter{1E8C}{\"X}
+  \DeclareUnicodeCharacter{1E8D}{\"x}
+  \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}}
+  \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}}
+
+  \DeclareUnicodeCharacter{1E90}{\^Z}
+  \DeclareUnicodeCharacter{1E91}{\^z}
+  \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}}
+  \DeclareUnicodeCharacter{1E93}{\udotaccent{z}}
+  \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}}
+  \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}}
+  \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}}
+  \DeclareUnicodeCharacter{1E97}{\"t}
+  \DeclareUnicodeCharacter{1E98}{\ringaccent{w}}
+  \DeclareUnicodeCharacter{1E99}{\ringaccent{y}}
+
+  \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}}
+  \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}}
+
+  \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}}
+  \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}}
+  \DeclareUnicodeCharacter{1EBC}{\~E}
+  \DeclareUnicodeCharacter{1EBD}{\~e}
+
+  \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}}
+  \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}}
+  \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}}
+  \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}}
+
+  \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}}
+  \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}}
+
+  \DeclareUnicodeCharacter{1EF2}{\`Y}
+  \DeclareUnicodeCharacter{1EF3}{\`y}
+  \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}}
+
+  \DeclareUnicodeCharacter{1EF8}{\~Y}
+  \DeclareUnicodeCharacter{1EF9}{\~y}
+
+  \DeclareUnicodeCharacter{2013}{--}
+  \DeclareUnicodeCharacter{2014}{---}
+  \DeclareUnicodeCharacter{2018}{\quoteleft}
+  \DeclareUnicodeCharacter{2019}{\quoteright}
+  \DeclareUnicodeCharacter{201A}{\quotesinglbase}
+  \DeclareUnicodeCharacter{201C}{\quotedblleft}
+  \DeclareUnicodeCharacter{201D}{\quotedblright}
+  \DeclareUnicodeCharacter{201E}{\quotedblbase}
+  \DeclareUnicodeCharacter{2022}{\bullet}
+  \DeclareUnicodeCharacter{2026}{\dots}
+  \DeclareUnicodeCharacter{2039}{\guilsinglleft}
+  \DeclareUnicodeCharacter{203A}{\guilsinglright}
+  \DeclareUnicodeCharacter{20AC}{\euro}
+
+  \DeclareUnicodeCharacter{2192}{\expansion}
+  \DeclareUnicodeCharacter{21D2}{\result}
+
+  \DeclareUnicodeCharacter{2212}{\minus}
+  \DeclareUnicodeCharacter{2217}{\point}
+  \DeclareUnicodeCharacter{2261}{\equiv}
+}% end of \utfeightchardefs
+
+
+% US-ASCII character definitions.
+\def\asciichardefs{% nothing need be done
+   \relax
+}
+
+% Make non-ASCII characters printable again for compatibility with
+% existing Texinfo documents that may use them, even without declaring a
+% document encoding.
+%
+\setnonasciicharscatcode \other
+
+
+\message{formatting,}
+
+\newdimen\defaultparindent \defaultparindent = 15pt
+
+\chapheadingskip = 15pt plus 4pt minus 2pt
+\secheadingskip = 12pt plus 3pt minus 2pt
+\subsecheadingskip = 9pt plus 2pt minus 2pt
+
+% Prevent underfull vbox error messages.
+\vbadness = 10000
+
+% Don't be very finicky about underfull hboxes, either.
+\hbadness = 6666
+
+% Following George Bush, get rid of widows and orphans.
+\widowpenalty=10000
+\clubpenalty=10000
+
+% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
+% using an old version of TeX, don't do anything.  We want the amount of
+% stretch added to depend on the line length, hence the dependence on
+% \hsize.  We call this whenever the paper size is set.
+%
+\def\setemergencystretch{%
+  \ifx\emergencystretch\thisisundefined
+    % Allow us to assign to \emergencystretch anyway.
+    \def\emergencystretch{\dimen0}%
+  \else
+    \emergencystretch = .15\hsize
+  \fi
+}
+
+% Parameters in order: 1) textheight; 2) textwidth;
+% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip;
+% 7) physical page height; 8) physical page width.
+%
+% We also call \setleading{\textleading}, so the caller should define
+% \textleading.  The caller should also set \parskip.
+%
+\def\internalpagesizes#1#2#3#4#5#6#7#8{%
+  \voffset = #3\relax
+  \topskip = #6\relax
+  \splittopskip = \topskip
+  %
+  \vsize = #1\relax
+  \advance\vsize by \topskip
+  \outervsize = \vsize
+  \advance\outervsize by 2\topandbottommargin
+  \pageheight = \vsize
+  %
+  \hsize = #2\relax
+  \outerhsize = \hsize
+  \advance\outerhsize by 0.5in
+  \pagewidth = \hsize
+  %
+  \normaloffset = #4\relax
+  \bindingoffset = #5\relax
+  %
+  \ifpdf
+    \pdfpageheight #7\relax
+    \pdfpagewidth #8\relax
+    % if we don't reset these, they will remain at "1 true in" of
+    % whatever layout pdftex was dumped with.
+    \pdfhorigin = 1 true in
+    \pdfvorigin = 1 true in
+  \fi
+  %
+  \setleading{\textleading}
+  %
+  \parindent = \defaultparindent
+  \setemergencystretch
+}
+
+% @letterpaper (the default).
+\def\letterpaper{{\globaldefs = 1
+  \parskip = 3pt plus 2pt minus 1pt
+  \textleading = 13.2pt
+  %
+  % If page is nothing but text, make it come out even.
+  \internalpagesizes{607.2pt}{6in}% that's 46 lines
+                    {\voffset}{.25in}%
+                    {\bindingoffset}{36pt}%
+                    {11in}{8.5in}%
+}}
+
+% Use @smallbook to reset parameters for 7x9.25 trim size.
+\def\smallbook{{\globaldefs = 1
+  \parskip = 2pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.5in}{5in}%
+                    {-.2in}{0in}%
+                    {\bindingoffset}{16pt}%
+                    {9.25in}{7in}%
+  %
+  \lispnarrowing = 0.3in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .5cm
+}}
+
+% Use @smallerbook to reset parameters for 6x9 trim size.
+% (Just testing, parameters still in flux.)
+\def\smallerbook{{\globaldefs = 1
+  \parskip = 1.5pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.4in}{4.8in}%
+                    {-.2in}{-.4in}%
+                    {0pt}{14pt}%
+                    {9in}{6in}%
+  %
+  \lispnarrowing = 0.25in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .4cm
+}}
+
+% Use @afourpaper to print on European A4 paper.
+\def\afourpaper{{\globaldefs = 1
+  \parskip = 3pt plus 2pt minus 1pt
+  \textleading = 13.2pt
+  %
+  % Double-side printing via postscript on Laserjet 4050
+  % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
+  % To change the settings for a different printer or situation, adjust
+  % \normaloffset until the front-side and back-side texts align.  Then
+  % do the same for \bindingoffset.  You can set these for testing in
+  % your texinfo source file like this:
+  % @tex
+  % \global\normaloffset = -6mm
+  % \global\bindingoffset = 10mm
+  % @end tex
+  \internalpagesizes{673.2pt}{160mm}% that's 51 lines
+                    {\voffset}{\hoffset}%
+                    {\bindingoffset}{44pt}%
+                    {297mm}{210mm}%
+  %
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = 5mm
+}}
+
+% Use @afivepaper to print on European A5 paper.
+% From romildo@urano.iceb.ufop.br, 2 July 2000.
+% He also recommends making @example and @lisp be small.
+\def\afivepaper{{\globaldefs = 1
+  \parskip = 2pt plus 1pt minus 0.1pt
+  \textleading = 12.5pt
+  %
+  \internalpagesizes{160mm}{120mm}%
+                    {\voffset}{\hoffset}%
+                    {\bindingoffset}{8pt}%
+                    {210mm}{148mm}%
+  %
+  \lispnarrowing = 0.2in
+  \tolerance = 800
+  \hfuzz = 1.2pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = 2mm
+  \tableindent = 12mm
+}}
+
+% A specific text layout, 24x15cm overall, intended for A4 paper.
+\def\afourlatex{{\globaldefs = 1
+  \afourpaper
+  \internalpagesizes{237mm}{150mm}%
+                    {\voffset}{4.6mm}%
+                    {\bindingoffset}{7mm}%
+                    {297mm}{210mm}%
+  %
+  % Must explicitly reset to 0 because we call \afourpaper.
+  \globaldefs = 0
+}}
+
+% Use @afourwide to print on A4 paper in landscape format.
+\def\afourwide{{\globaldefs = 1
+  \afourpaper
+  \internalpagesizes{241mm}{165mm}%
+                    {\voffset}{-2.95mm}%
+                    {\bindingoffset}{7mm}%
+                    {297mm}{210mm}%
+  \globaldefs = 0
+}}
+
+% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
+% Perhaps we should allow setting the margins, \topskip, \parskip,
+% and/or leading, also. Or perhaps we should compute them somehow.
+%
+\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
+\def\pagesizesyyy#1,#2,#3\finish{{%
+  \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
+  \globaldefs = 1
+  %
+  \parskip = 3pt plus 2pt minus 1pt
+  \setleading{\textleading}%
+  %
+  \dimen0 = #1\relax
+  \advance\dimen0 by \voffset
+  %
+  \dimen2 = \hsize
+  \advance\dimen2 by \normaloffset
+  %
+  \internalpagesizes{#1}{\hsize}%
+                    {\voffset}{\normaloffset}%
+                    {\bindingoffset}{44pt}%
+                    {\dimen0}{\dimen2}%
+}}
+
+% Set default to letter.
+%
+\letterpaper
+
+
+\message{and turning on texinfo input format.}
+
+\def^^L{\par} % remove \outer, so ^L can appear in an @comment
+
+% DEL is a comment character, in case @c does not suffice.
+\catcode`\^^? = 14
+
+% Define macros to output various characters with catcode for normal text.
+\catcode`\"=\other \def\normaldoublequote{"}
+\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix
+\catcode`\+=\other \def\normalplus{+}
+\catcode`\<=\other \def\normalless{<}
+\catcode`\>=\other \def\normalgreater{>}
+\catcode`\^=\other \def\normalcaret{^}
+\catcode`\_=\other \def\normalunderscore{_}
+\catcode`\|=\other \def\normalverticalbar{|}
+\catcode`\~=\other \def\normaltilde{~}
+
+% This macro is used to make a character print one way in \tt
+% (where it can probably be output as-is), and another way in other fonts,
+% where something hairier probably needs to be done.
+%
+% #1 is what to print if we are indeed using \tt; #2 is what to print
+% otherwise.  Since all the Computer Modern typewriter fonts have zero
+% interword stretch (and shrink), and it is reasonable to expect all
+% typewriter fonts to have this, we can check that font parameter.
+%
+\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
+
+% Same as above, but check for italic font.  Actually this also catches
+% non-italic slanted fonts since it is impossible to distinguish them from
+% italic fonts.  But since this is only used by $ and it uses \sl anyway
+% this is not a problem.
+\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
+
+% Turn off all special characters except @
+% (and those which the user can use as if they were ordinary).
+% Most of these we simply print from the \tt font, but for some, we can
+% use math or other variants that look better in normal text.
+
+\catcode`\"=\active
+\def\activedoublequote{{\tt\char34}}
+\let"=\activedoublequote
+\catcode`\~=\active
+\def~{{\tt\char126}}
+\chardef\hat=`\^
+\catcode`\^=\active
+\def^{{\tt \hat}}
+
+\catcode`\_=\active
+\def_{\ifusingtt\normalunderscore\_}
+\let\realunder=_
+% Subroutine for the previous macro.
+\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
+
+\catcode`\|=\active
+\def|{{\tt\char124}}
+\chardef \less=`\<
+\catcode`\<=\active
+\def<{{\tt \less}}
+\chardef \gtr=`\>
+\catcode`\>=\active
+\def>{{\tt \gtr}}
+\catcode`\+=\active
+\def+{{\tt \char 43}}
+\catcode`\$=\active
+\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
+
+% If a .fmt file is being used, characters that might appear in a file
+% name cannot be active until we have parsed the command line.
+% So turn them off again, and have \everyjob (or @setfilename) turn them on.
+% \otherifyactive is called near the end of this file.
+\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
+
+% Used sometimes to turn off (effectively) the active characters even after
+% parsing them.
+\def\turnoffactive{%
+  \normalturnoffactive
+  \otherbackslash
+}
+
+\catcode`\@=0
+
+% \backslashcurfont outputs one backslash character in current font,
+% as in \char`\\.
+\global\chardef\backslashcurfont=`\\
+\global\let\rawbackslashxx=\backslashcurfont  % let existing .??s files work
+
+% \realbackslash is an actual character `\' with catcode other, and
+% \doublebackslash is two of them (for the pdf outlines).
+{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
+
+% In texinfo, backslash is an active character; it prints the backslash
+% in fixed width font.
+\catcode`\\=\active  % @ for escape char from now on.
+
+% The story here is that in math mode, the \char of \backslashcurfont
+% ends up printing the roman \ from the math symbol font (because \char
+% in math mode uses the \mathcode, and plain.tex sets
+% \mathcode`\\="026E).  It seems better for @backslashchar{} to always
+% print a typewriter backslash, hence we use an explicit \mathchar,
+% which is the decimal equivalent of "715c (class 7, e.g., use \fam;
+% ignored family value; char position "5C).  We can't use " for the
+% usual hex value because it has already been made active.
+@def@normalbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}}
+@let@backslashchar = @normalbackslash % @backslashchar{} is for user documents.
+
+% On startup, @fixbackslash assigns:
+%  @let \ = @normalbackslash
+% \rawbackslash defines an active \ to do \backslashcurfont.
+% \otherbackslash defines an active \ to be a literal `\' character with
+% catcode other.  We switch back and forth between these.
+@gdef@rawbackslash{@let\=@backslashcurfont}
+@gdef@otherbackslash{@let\=@realbackslash}
+
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'.  Also revert - to its normal character, in
+% case the active - from code has slipped in.
+%
+{@catcode`- = @active
+ @gdef@normalturnoffactive{%
+   @let-=@normaldash
+   @let"=@normaldoublequote
+   @let$=@normaldollar %$ font-lock fix
+   @let+=@normalplus
+   @let<=@normalless
+   @let>=@normalgreater
+   @let\=@normalbackslash
+   @let^=@normalcaret
+   @let_=@normalunderscore
+   @let|=@normalverticalbar
+   @let~=@normaltilde
+   @markupsetuplqdefault
+   @markupsetuprqdefault
+   @unsepspaces
+ }
+}
+
+% Make _ and + \other characters, temporarily.
+% This is canceled by @fixbackslash.
+@otherifyactive
+
+% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
+% That is what \eatinput is for; after that, the `\' should revert to printing
+% a backslash.
+%
+@gdef@eatinput input texinfo{@fixbackslash}
+@global@let\ = @eatinput
+
+% On the other hand, perhaps the file did not have a `\input texinfo'. Then
+% the first `\' in the file would cause an error. This macro tries to fix
+% that, assuming it is called before the first `\' could plausibly occur.
+% Also turn back on active characters that might appear in the input
+% file name, in case not using a pre-dumped format.
+%
+@gdef@fixbackslash{%
+  @ifx\@eatinput @let\ = @normalbackslash @fi
+  @catcode`+=@active
+  @catcode`@_=@active
+}
+
+% Say @foo, not \foo, in error messages.
+@escapechar = `@@
+
+% These (along with & and #) are made active for url-breaking, so need
+% active definitions as the normal characters.
+@def@normaldot{.}
+@def@normalquest{?}
+@def@normalslash{/}
+
+% These look ok in all fonts, so just make them not special.
+% @hashchar{} gets its own user-level command, because of #line.
+@catcode`@& = @other @def@normalamp{&}
+@catcode`@# = @other @def@normalhash{#}
+@catcode`@% = @other @def@normalpercent{%}
+
+@let @hashchar = @normalhash
+
+@c Finally, make ` and ' active, so that txicodequoteundirected and
+@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}.  If we
+@c don't make ` and ' active, @code will not get them as active chars.
+@c Do this last of all since we use ` in the previous @catcode assignments.
+@catcode`@'=@active
+@catcode`@`=@active
+@markupsetuplqdefault
+@markupsetuprqdefault
+
+@c Local variables:
+@c eval: (add-hook 'write-file-hooks 'time-stamp)
+@c page-delimiter: "^\\\\message"
+@c time-stamp-start: "def\\\\texinfoversion{"
+@c time-stamp-format: "%:y-%02m-%02d.%02H"
+@c time-stamp-end: "}"
+@c End:
+
+@c vim:sw=2:
+
+@ignore
+   arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
+@end ignore
diff --git a/build-aux/ylwrap b/build-aux/ylwrap
new file mode 100755
index 0000000..7c2d927
--- /dev/null
+++ b/build-aux/ylwrap
@@ -0,0 +1,247 @@
+#! /bin/sh
+# ylwrap - wrapper for lex/yacc invocations.
+
+scriptversion=2013-01-12.17; # UTC
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+get_dirname ()
+{
+  case $1 in
+    */*|*\\*) printf '%s\n' "$1" | sed -e 's|\([\\/]\)[^\\/]*$|\1|';;
+    # Otherwise,  we want the empty string (not ".").
+  esac
+}
+
+# guard FILE
+# ----------
+# The CPP macro used to guard inclusion of FILE.
+guard ()
+{
+  printf '%s\n' "$1"                                                    \
+    | sed                                                               \
+        -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'   \
+        -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'                        \
+        -e 's/__*/_/g'
+}
+
+# quote_for_sed [STRING]
+# ----------------------
+# Return STRING (or stdin) quoted to be used as a sed pattern.
+quote_for_sed ()
+{
+  case $# in
+    0) cat;;
+    1) printf '%s\n' "$1";;
+  esac \
+    | sed -e 's|[][\\.*]|\\&|g'
+}
+
+case "$1" in
+  '')
+    echo "$0: No files given.  Try '$0 --help' for more information." 1>&2
+    exit 1
+    ;;
+  --basedir)
+    basedir=$2
+    shift 2
+    ;;
+  -h|--h*)
+    cat <<\EOF
+Usage: ylwrap [--help|--version] INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
+
+Wrapper for lex/yacc invocations, renaming files as desired.
+
+  INPUT is the input file
+  OUTPUT is one file PROG generates
+  DESIRED is the file we actually want instead of OUTPUT
+  PROGRAM is program to run
+  ARGS are passed to PROG
+
+Any number of OUTPUT,DESIRED pairs may be used.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v|--v*)
+    echo "ylwrap $scriptversion"
+    exit $?
+    ;;
+esac
+
+
+# The input.
+input=$1
+shift
+# We'll later need for a correct munging of "#line" directives.
+input_sub_rx=`get_dirname "$input" | quote_for_sed`
+case $input in
+  [\\/]* | ?:[\\/]*)
+    # Absolute path; do nothing.
+    ;;
+  *)
+    # Relative path.  Make it absolute.
+    input=`pwd`/$input
+    ;;
+esac
+input_rx=`get_dirname "$input" | quote_for_sed`
+
+# Since DOS filename conventions don't allow two dots,
+# the DOS version of Bison writes out y_tab.c instead of y.tab.c
+# and y_tab.h instead of y.tab.h. Test to see if this is the case.
+y_tab_nodot=false
+if test -f y_tab.c || test -f y_tab.h; then
+  y_tab_nodot=true
+fi
+
+# The parser itself, the first file, is the destination of the .y.c
+# rule in the Makefile.
+parser=$1
+
+# A sed program to s/FROM/TO/g for all the FROM/TO so that, for
+# instance, we rename #include "y.tab.h" into #include "parse.h"
+# during the conversion from y.tab.c to parse.c.
+sed_fix_filenames=
+
+# Also rename header guards, as Bison 2.7 for instance uses its header
+# guard in its implementation file.
+sed_fix_header_guards=
+
+while test $# -ne 0; do
+  if test x"$1" = x"--"; then
+    shift
+    break
+  fi
+  from=$1
+  # Handle y_tab.c and y_tab.h output by DOS
+  if $y_tab_nodot; then
+    case $from in
+      "y.tab.c") from=y_tab.c;;
+      "y.tab.h") from=y_tab.h;;
+    esac
+  fi
+  shift
+  to=$1
+  shift
+  sed_fix_filenames="${sed_fix_filenames}s|"`quote_for_sed "$from"`"|$to|g;"
+  sed_fix_header_guards="${sed_fix_header_guards}s|"`guard "$from"`"|"`guard "$to"`"|g;"
+done
+
+# The program to run.
+prog=$1
+shift
+# Make any relative path in $prog absolute.
+case $prog in
+  [\\/]* | ?:[\\/]*) ;;
+  *[\\/]*) prog=`pwd`/$prog ;;
+esac
+
+dirname=ylwrap$$
+do_exit="cd '`pwd`' && rm -rf $dirname > /dev/null 2>&1;"' (exit $ret); exit $ret'
+trap "ret=129; $do_exit" 1
+trap "ret=130; $do_exit" 2
+trap "ret=141; $do_exit" 13
+trap "ret=143; $do_exit" 15
+mkdir $dirname || exit 1
+
+cd $dirname
+
+case $# in
+  0) "$prog" "$input" ;;
+  *) "$prog" "$@" "$input" ;;
+esac
+ret=$?
+
+if test $ret -eq 0; then
+  for from in *
+  do
+    to=`printf '%s\n' "$from" | sed "$sed_fix_filenames"`
+    if test -f "$from"; then
+      # If $2 is an absolute path name, then just use that,
+      # otherwise prepend '../'.
+      case $to in
+        [\\/]* | ?:[\\/]*) target=$to;;
+        *) target=../$to;;
+      esac
+
+      # Do not overwrite unchanged header files to avoid useless
+      # recompilations.  Always update the parser itself: it is the
+      # destination of the .y.c rule in the Makefile.  Divert the
+      # output of all other files to a temporary file so we can
+      # compare them to existing versions.
+      if test $from != $parser; then
+        realtarget=$target
+        target=tmp-`printf '%s\n' "$target" | sed 's|.*[\\/]||g'`
+      fi
+
+      # Munge "#line" or "#" directives.  Don't let the resulting
+      # debug information point at an absolute srcdir.  Use the real
+      # output file name, not yy.lex.c for instance.  Adjust the
+      # include guards too.
+      sed -e "/^#/!b"                           \
+          -e "s|$input_rx|$input_sub_rx|"       \
+          -e "$sed_fix_filenames"               \
+          -e "$sed_fix_header_guards"           \
+        "$from" >"$target" || ret=$?
+
+      # Check whether files must be updated.
+      if test "$from" != "$parser"; then
+        if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then
+          echo "$to is unchanged"
+          rm -f "$target"
+        else
+          echo "updating $to"
+          mv -f "$target" "$realtarget"
+        fi
+      fi
+    else
+      # A missing file is only an error for the parser.  This is a
+      # blatant hack to let us support using "yacc -d".  If -d is not
+      # specified, don't fail when the header file is "missing".
+      if test "$from" = "$parser"; then
+        ret=1
+      fi
+    fi
+  done
+fi
+
+# Remove the directory.
+cd ..
+rm -rf $dirname
+
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/configure b/configure
new file mode 100755
index 0000000..5da7386
--- /dev/null
+++ b/configure
@@ -0,0 +1,22648 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for the fast lexical analyser generator 2.6.1.
+#
+# Report bugs to <flex-help@lists.sourceforge.net>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: flex-help@lists.sourceforge.net about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='the fast lexical analyser generator'
+PACKAGE_TARNAME='flex'
+PACKAGE_VERSION='2.6.1'
+PACKAGE_STRING='the fast lexical analyser generator 2.6.1'
+PACKAGE_BUGREPORT='flex-help@lists.sourceforge.net'
+PACKAGE_URL=''
+
+ac_unique_file="src/scan.l"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_config_libobj_dir=lib
+gt_needs=
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+ALLOCA
+want_pthread_FALSE
+want_pthread_TRUE
+INDENT
+M4
+TEXI2DVI
+HELP2MAN
+BISON
+am__fastdepCXX_FALSE
+am__fastdepCXX_TRUE
+CXXDEPMODE
+CXXCPP
+ac_ct_CXX
+CXXFLAGS
+CXX
+LEXLIB
+LEX_OUTPUT_ROOT
+LEX
+YFLAGS
+YACC
+POSUB
+LTLIBINTL
+LIBINTL
+INTLLIBS
+LTLIBICONV
+LIBICONV
+INTL_MACOSX_LIBS
+XGETTEXT_EXTRA_OPTIONS
+MSGMERGE
+XGETTEXT_015
+XGETTEXT
+GMSGFMT_015
+MSGFMT_015
+GMSGFMT
+MSGFMT
+GETTEXT_MACRO_VERSION
+USE_NLS
+SHARED_VERSION_INFO
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+CPP
+LT_SYS_LIBRARY_PATH
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+AWK
+RANLIB
+STRIP
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_aix_soname
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+enable_dependency_tracking
+enable_silent_rules
+enable_nls
+enable_rpath
+with_libiconv_prefix
+with_libintl_prefix
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+LT_SYS_LIBRARY_PATH
+CPP
+YACC
+YFLAGS
+CXX
+CXXFLAGS
+CCC
+CXXCPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures the fast lexical analyser generator 2.6.1 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/flex]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of the fast lexical analyser generator 2.6.1:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
+  --enable-silent-rules   less verbose build output (undo: "make V=1")
+  --disable-silent-rules  verbose build output (undo: "make V=0")
+  --disable-nls           do not use Native Language Support
+  --disable-rpath         do not hardcode runtime library paths
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-aix-soname=aix|svr4|both
+                          shared library versioning (aka "SONAME") variant to
+                          provide on AIX, [default=aix].
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot[=DIR]    Search for dependent libraries within DIR (or the
+                          compiler's sysroot if not specified).
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-libiconv-prefix[=DIR]  search for libiconv in DIR/include and DIR/lib
+  --without-libiconv-prefix     don't search for libiconv in includedir and libdir
+  --with-libintl-prefix[=DIR]  search for libintl in DIR/include and DIR/lib
+  --without-libintl-prefix     don't search for libintl in includedir and libdir
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  LT_SYS_LIBRARY_PATH
+              User-defined run-time library search path.
+  CPP         C preprocessor
+  YACC        The `Yet Another Compiler Compiler' implementation to use.
+              Defaults to the first program found out of: `bison -y', `byacc',
+              `yacc'.
+  YFLAGS      The list of arguments that will be passed by default to $YACC.
+              This script will default YFLAGS to the empty string to avoid a
+              default value of `-d' given by some make applications.
+  CXX         C++ compiler command
+  CXXFLAGS    C++ compiler flags
+  CXXCPP      C++ preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <flex-help@lists.sourceforge.net>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+the fast lexical analyser generator configure 2.6.1
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_compile
+
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_cpp
+
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if eval \${$3+:} false; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( $as_echo "## ---------------------------------------------- ##
+## Report this to flex-help@lists.sourceforge.net ##
+## ---------------------------------------------- ##"
+     ) | sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by the fast lexical analyser generator $as_me 2.6.1, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+gt_needs="$gt_needs "
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_aux_dir=
+for ac_dir in build-aux "$srcdir"/build-aux; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.6'
+macro_revision='2.4.6'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain=$ac_aux_dir/ltmain.sh
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case $ECHO in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_FGREP" || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test yes = "$GCC"; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return, which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD=$ac_prog
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test yes = "$with_gnu_ld"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD=$ac_dir/$ac_prog
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test no != "$with_gnu_ld" && break
+	;;
+      *)
+	test yes != "$with_gnu_ld" && break
+	;;
+      esac
+    fi
+  done
+  IFS=$lt_save_ifs
+else
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
+fi
+fi
+
+LD=$lt_cv_path_LD
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM=$NM
+else
+  lt_nm_to_check=${ac_tool_prefix}nm
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS=$lt_save_ifs
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm=$ac_dir/$lt_tmp_nm
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+	case $build_os in
+	mingw*) lt_bad_file=conftest.nm/nofile ;;
+	*) lt_bad_file=/dev/null ;;
+	esac
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+	*$lt_bad_file* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break 2
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break 2
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS=$lt_save_ifs
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test no != "$lt_cv_path_NM"; then
+  NM=$lt_cv_path_NM
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols -headers"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test : != "$DUMPBIN"; then
+    NM=$DUMPBIN
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring=ABCD
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+       test undefined != "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test X`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test 17 != "$i" # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n "$lt_cv_sys_max_cmd_len"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test yes != "$GCC"; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test yes = "$GCC"; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# 'unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd* | bitrig*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+os2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh;
+  # decide which one to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd=$ECHO
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test 0 -eq "$ac_status"; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test 0 -ne "$ac_status"; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test no = "$lt_cv_ar_at_file"; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  bitrig* | openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test ia64 = "$host_cpu"; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  # Gets list of data symbols to import.
+  lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+  # Adjust the below global symbol transforms to fixup imported variables.
+  lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+  lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
+  lt_c_name_lib_hook="\
+  -e 's/^I .* \(lib.*\)$/  {\"\1\", (void *) 0},/p'\
+  -e 's/^I .* \(.*\)$/  {\"lib\1\", (void *) 0},/p'"
+else
+  # Disable hooks by default.
+  lt_cv_sys_global_symbol_to_import=
+  lt_cdecl_hook=
+  lt_c_name_hook=
+  lt_c_name_lib_hook=
+fi
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"lib\1\", (void *) \&\1},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function,
+    # D for any global variable and I for any imported variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+"     /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+"     /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+"     {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+"     s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS=conftstm.$ac_objext
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest$ac_exeext; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test yes = "$pipe_works"; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case $with_sysroot in #(
+ yes)
+   if test yes = "$GCC"; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+  ac_path_lt_DD_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in dd; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+      $ac_path_lt_DD_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_lt_DD"; then
+    :
+  fi
+else
+  ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out what ABI is being produced by ac_compile, and set mode
+  # options accordingly.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE=32
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE=64
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test yes = "$lt_cv_prog_gnu_ld"; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+mips64*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    emul=elf
+    case `/usr/bin/file conftest.$ac_objext` in
+      *32-bit*)
+	emul="${emul}32"
+	;;
+      *64-bit*)
+	emul="${emul}64"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *MSB*)
+	emul="${emul}btsmip"
+	;;
+      *LSB*)
+	emul="${emul}ltsmip"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *N32*)
+	emul="${emul}n32"
+	;;
+    esac
+    LD="${LD-ld} -m $emul"
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.  Note that the listed cases only cover the
+  # situations where additional linker options are needed (such as when
+  # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+  # vice versa); the common cases where no linker options are needed do
+  # not appear in the list.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
+		LD="${LD-ld} -m elf_i386"
+		;;
+	    esac
+	    ;;
+	  powerpc64le-*linux*)
+	    LD="${LD-ld} -m elf32lppclinux"
+	    ;;
+	  powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  powerpcle-*linux*)
+	    LD="${LD-ld} -m elf64lppc"
+	    ;;
+	  powerpc-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS=$CFLAGS
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test yes != "$lt_cv_cc_needs_belf"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS=$SAVE_CFLAGS
+  fi
+  ;;
+*-*solaris*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*|x86_64-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD=${LD-ld}_sol2
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks=$enable_libtool_lock
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test yes != "$lt_cv_path_mainfest_tool"; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "$LT_MULTI_MODULE"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+	10.[012][,.]*)
+	  _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test yes = "$lt_cv_apple_cc_single_mod"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test yes = "$lt_cv_ld_exported_symbols_list"; then
+      _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
+    fi
+    if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+
+
+
+        enable_dlopen=no
+
+
+  enable_win32_dll=no
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for lt_pkg in $withval; do
+	IFS=$lt_save_ifs
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+  shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
+
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+  withval=$with_aix_soname; case $withval in
+    aix|svr4|both)
+      ;;
+    *)
+      as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+      ;;
+    esac
+    lt_cv_with_aix_soname=$with_aix_soname
+else
+  if ${lt_cv_with_aix_soname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_with_aix_soname=aix
+fi
+
+    with_aix_soname=$lt_cv_with_aix_soname
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+  if test aix != "$with_aix_soname"; then
+    # For the AIX way of multilib, we name the shared archive member
+    # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+    # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+    # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+    # the AIX toolchain works better with OBJECT_MODE set (default 32).
+    if test 64 = "${OBJECT_MODE-32}"; then
+      shared_archive_member_spec=shr_64
+    else
+      shared_archive_member_spec=shr
+    fi
+  fi
+  ;;
+*)
+  with_aix_soname=aix
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS=$ltmain
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}"; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test set != "${COLLECT_NAMES+set}"; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+old_CC=$CC
+old_CFLAGS=$CFLAGS
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/${ac_tool_prefix}file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
+  ;;
+esac
+fi
+
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
+  ;;
+esac
+fi
+
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC=$CC
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test yes = "$GCC"; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"  ## exclude from sc_useless_quotes_in_assignment
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test yes = "$GCC"; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      case $cc_basename in
+      nagfor*)
+        # NAG Fortran compiler
+        lt_prog_compiler_wl='-Wl,-Wl,,'
+        lt_prog_compiler_pic='-PIC'
+        lt_prog_compiler_static='-Bstatic'
+        ;;
+      esac
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='$wl-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+      case $cc_basename in
+      # old Intel for x86_64, which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms that do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"  ## exclude from sc_useless_quotes_in_assignment
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS=$LDFLAGS
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_static_works"; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test no = "$hard_links"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ' (' and ')$', so one must not match beginning or
+  # end of line.  Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+  # as well as any symbol that contains 'd'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test yes != "$GCC"; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd* | bitrig*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test yes = "$with_gnu_ld"; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test yes = "$lt_use_gnu_ld_interface"; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='$wl'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+    export_dynamic_flag_spec='$wl--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test ia64 != "$host_cpu"; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='$wl--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file, use it as
+	# is; otherwise, prepend EXPORTS...
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+          cp $export_symbols $output_objdir/$soname.def;
+        else
+          echo EXPORTS > $output_objdir/$soname.def;
+          cat $export_symbols >> $output_objdir/$soname.def;
+        fi~
+        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+      export_dynamic_flag_spec='$wl-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test linux-dietlibc = "$host_os"; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test no = "$tmp_diet"
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+        nagfor*)                        # NAGFOR 5.3
+          tmp_sharedflag='-Wl,-shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+
+        if test yes = "$supports_anon_versioning"; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            echo "local: *; };" >> $output_objdir/$libname.ver~
+            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	tcc*)
+	  export_dynamic_flag_spec='-rdynamic'
+	  ;;
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test yes = "$supports_anon_versioning"; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              echo "local: *; };" >> $output_objdir/$libname.ver~
+              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test no = "$ld_shlibs"; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test ia64 = "$host_cpu"; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to GNU nm, but means don't demangle to AIX nm.
+	# Without the "-l" option, or with the "-B" option, AIX nm treats
+	# weak defined symbols like other global defined symbols, whereas
+	# GNU nm marks them as "W".
+	# While the 'weak' keyword is ignored in the Export File, we need
+	# it in the Import File for the 'aix-soname' feature, so we have
+	# to replace the "-B" option with "-P" for AIX nm.
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# have runtime linking enabled, and use it for executables.
+	# For shared libraries, we enable/disable runtime linking
+	# depending on the kind of the shared library created -
+	# when "with_aix_soname,aix_use_runtimelinking" is:
+	# "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "aix,yes"  lib.so          shared, rtl:yes, for executables
+	#            lib.a           static archive
+	# "both,no"  lib.so.V(shr.o) shared, rtl:yes
+	#            lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a(lib.so.V) shared, rtl:no
+	# "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a           static archive
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	    # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	    # so we don't have lib.a shared libs to link our executables.
+	    # We have to force runtime linking in this case.
+	    aix_use_runtimelinking=yes
+	    LDFLAGS="$LDFLAGS -Wl,-brtl"
+	  fi
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='$wl-f,'
+      case $with_aix_soname,$aix_use_runtimelinking in
+      aix,*) ;; # traditional, no import file
+      svr4,* | *,yes) # use import file
+	# The Import File defines what to hardcode.
+	hardcode_direct=no
+	hardcode_direct_absolute=no
+	;;
+      esac
+
+      if test yes = "$GCC"; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`$CC -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test yes = "$aix_use_runtimelinking"; then
+	  shared_flag="$shared_flag "'$wl-G'
+	fi
+	# Need to ensure runtime linking is disabled for the traditional
+	# shared library, or the linker may eventually find shared libraries
+	# /with/ Import File - we do not want to mix them.
+	shared_flag_aix='-shared'
+	shared_flag_svr4='-shared $wl-G'
+      else
+	# not using gcc
+	if test ia64 = "$host_cpu"; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag='$wl-G'
+	  else
+	    shared_flag='$wl-bM:SRE'
+	  fi
+	  shared_flag_aix='$wl-bM:SRE'
+	  shared_flag_svr4='$wl-G'
+	fi
+      fi
+
+      export_dynamic_flag_spec='$wl-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=/usr/lib:/lib
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+      else
+	if test ia64 = "$host_cpu"; then
+	  hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=/usr/lib:/lib
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' $wl-bernotok'
+	  allow_undefined_flag=' $wl-berok'
+	  if test yes = "$with_gnu_ld"; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	  # -brtl affects multiple linker settings, -berok does not and is overridden later
+	  compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+	  if test svr4 != "$with_aix_soname"; then
+	    # This is similar to how AIX traditionally builds its shared libraries.
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	  fi
+	  if test aix != "$with_aix_soname"; then
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	  else
+	    # used by -dlpreopen to get the symbols
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	  fi
+	  archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=.dll
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+            cp "$export_symbols" "$output_objdir/$soname.def";
+            echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+          else
+            $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+          fi~
+          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+          linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+          lt_tool_outputfile="@TOOL_OUTPUT@"~
+          case $lt_outputfile in
+            *.exe|*.EXE) ;;
+            *)
+              lt_outputfile=$lt_outputfile.exe
+              lt_tool_outputfile=$lt_tool_outputfile.exe
+              ;;
+          esac~
+          if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+            $RM "$lt_outputfile.manifest";
+          fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=.dll
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag=$_lt_dar_allow_undefined
+  case $cc_basename in
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test yes = "$_lt_dar_can_shared"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test yes = "$GCC"; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='$wl-E'
+      ;;
+
+    hpux10*)
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='$wl-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS=$LDFLAGS
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test yes = "$lt_cv_prog_compiler__b"; then
+    archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='$wl-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS=$LDFLAGS
+	   LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS=$save_LDFLAGS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test yes = "$lt_cv_irix_exported_symbol"; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    linux*)
+      case $cc_basename in
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	ld_shlibs=yes
+	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      esac
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd* | bitrig*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+	  export_dynamic_flag_spec='$wl-E'
+	else
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
+      ;;
+
+    osf3*)
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+          $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test yes = "$GCC"; then
+	wlarc='$wl'
+	archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+          $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+            $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='$wl'
+	  archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+            $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands '-z linker_flag'.  GCC discards it without '$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test yes = "$GCC"; then
+	  whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test sequent = "$host_vendor"; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='$wl-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We CANNOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='$wl-z,text'
+      allow_undefined_flag='$wl-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='$wl-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='$wl-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test sni = "$host_vendor"; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='$wl-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test no = "$ld_shlibs" && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test yes,yes = "$GCC,$enable_shared"; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test yes = "$GCC"; then
+  case $host_os in
+    darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+    *) lt_awk_arg='/^libraries:/' ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+    *) lt_sed_strip_eq='s|=/|/|g' ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary...
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  # ...but if some path component already ends with the multilib dir we assume
+  # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+  case "$lt_multi_os_dir; $lt_search_path_spec " in
+  "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+    lt_multi_os_dir=
+    ;;
+  esac
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+    elif test -n "$lt_multi_os_dir"; then
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS = " "; FS = "/|\n";} {
+  lt_foo = "";
+  lt_count = 0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo = "/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=.so
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='$libname$release$shared_ext$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test ia64 = "$host_cpu"; then
+    # AIX 5 supports IA64
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='$libname$shared_ext'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec=$LIB
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
+    fi
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test yes = "$lt_cv_prog_gnu_ld"; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec='-L$libdir'
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd* | bitrig*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec=/usr/lib
+  need_lib_prefix=no
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
+  else
+    need_version=yes
+  fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+os2*)
+  libname_spec='$name'
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test yes = "$with_gnu_ld"; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec; then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=sco
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test yes = "$with_gnu_ld"; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test no = "$dynamic_linker" && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test yes = "$GCC"; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
+fi
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
+fi
+
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test yes = "$hardcode_automatic"; then
+
+  # We can hardcode non-existent directories.
+  if test no != "$hardcode_direct" &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+     test no != "$hardcode_minus_L"; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test relink = "$hardcode_action" ||
+   test yes = "$inherit_rpath"; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test yes != "$enable_dlopen"; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen=load_add_on
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen=LoadLibrary
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+    # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
+else
+
+    lt_cv_dlopen=dyld
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  tpf*)
+    # Don't try to run any link tests for TPF.  We know it's impossible
+    # because TPF is a cross-compiler, and we know how we open DSOs.
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=no
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen=shl_load
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen=dlopen
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test no = "$lt_cv_dlopen"; then
+    enable_dlopen=no
+  else
+    enable_dlopen=yes
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS=$CPPFLAGS
+    test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS=$LDFLAGS
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS=$LIBS
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test yes = "$cross_compiling"; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test yes = "$lt_cv_dlopen_self"; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test yes = "$cross_compiling"; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS=$save_CPPFLAGS
+    LDFLAGS=$save_LDFLAGS
+    LIBS=$save_LIBS
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP"; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report what library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test no = "$can_build_shared" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test yes = "$enable_shared" && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test ia64 != "$host_cpu"; then
+      case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+      yes,aix,yes) ;;			# shared object as lib.so file only
+      yes,svr4,*) ;;			# shared object as lib.so archive member only
+      yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+      esac
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test yes = "$enable_shared" || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC=$lt_save_CC
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+am__api_version='1.15'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='flex'
+ VERSION='2.6.1'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar  pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
+
+ac_config_headers="$ac_config_headers src/config.h"
+
+
+
+SHARED_VERSION_INFO="2:0:0"
+
+
+# checks for programs
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
+$as_echo_n "checking whether NLS is requested... " >&6; }
+    # Check whether --enable-nls was given.
+if test "${enable_nls+set}" = set; then :
+  enableval=$enable_nls; USE_NLS=$enableval
+else
+  USE_NLS=yes
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+
+
+
+
+      GETTEXT_MACRO_VERSION=0.19
+
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGFMT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$MSGFMT" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
+     (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+            ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
+    ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test "$MSGFMT" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
+$as_echo "$MSGFMT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_GMSGFMT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $GMSGFMT in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+  ;;
+esac
+fi
+GMSGFMT=$ac_cv_path_GMSGFMT
+if test -n "$GMSGFMT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
+$as_echo "$GMSGFMT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+    case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+    *) MSGFMT_015=$MSGFMT ;;
+  esac
+
+  case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+    *) GMSGFMT_015=$GMSGFMT ;;
+  esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_XGETTEXT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$XGETTEXT" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
+     (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+            ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+    ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test "$XGETTEXT" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
+$as_echo "$XGETTEXT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+    rm -f messages.po
+
+    case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+    *) XGETTEXT_015=$XGETTEXT ;;
+  esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgmerge", so it can be a program name with args.
+set dummy msgmerge; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGMERGE+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$MSGMERGE" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
+            ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
+    ;;
+esac
+fi
+MSGMERGE="$ac_cv_path_MSGMERGE"
+if test "$MSGMERGE" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
+$as_echo "$MSGMERGE" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+        test -n "$localedir" || localedir='${datadir}/locale'
+
+
+    test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+
+
+  ac_config_commands="$ac_config_commands po-directories"
+
+
+
+      if test "X$prefix" = "XNONE"; then
+    acl_final_prefix="$ac_default_prefix"
+  else
+    acl_final_prefix="$prefix"
+  fi
+  if test "X$exec_prefix" = "XNONE"; then
+    acl_final_exec_prefix='${prefix}'
+  else
+    acl_final_exec_prefix="$exec_prefix"
+  fi
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+  prefix="$acl_save_prefix"
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'`
+      while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do
+        ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${acl_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$acl_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      acl_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+        test "$with_gnu_ld" != no && break
+        ;;
+      *)
+        test "$with_gnu_ld" != yes && break
+        ;;
+      esac
+    fi
+  done
+  IFS="$acl_save_ifs"
+else
+  acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${acl_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  acl_cv_prog_gnu_ld=yes
+  ;;
+*)
+  acl_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+
+                                                { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if ${acl_cv_rpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+    . ./conftest.sh
+    rm -f ./conftest.sh
+    acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+  wl="$acl_cv_wl"
+  acl_libext="$acl_cv_libext"
+  acl_shlibext="$acl_cv_shlibext"
+  acl_libname_spec="$acl_cv_libname_spec"
+  acl_library_names_spec="$acl_cv_library_names_spec"
+  acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+  acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+  acl_hardcode_direct="$acl_cv_hardcode_direct"
+  acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+    # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+  enableval=$enable_rpath; :
+else
+  enable_rpath=yes
+fi
+
+
+
+
+  acl_libdirstem=lib
+  acl_libdirstem2=
+  case "$host_os" in
+    solaris*)
+                                    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5
+$as_echo_n "checking for 64-bit host... " >&6; }
+if ${gl_cv_solaris_64bit+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef _LP64
+sixtyfour bits
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "sixtyfour bits" >/dev/null 2>&1; then :
+  gl_cv_solaris_64bit=yes
+else
+  gl_cv_solaris_64bit=no
+fi
+rm -f conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5
+$as_echo "$gl_cv_solaris_64bit" >&6; }
+      if test $gl_cv_solaris_64bit = yes; then
+        acl_libdirstem=lib/64
+        case "$host_cpu" in
+          sparc*)        acl_libdirstem2=lib/sparcv9 ;;
+          i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+        esac
+      fi
+      ;;
+    *)
+      searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+      if test -n "$searchpath"; then
+        acl_save_IFS="${IFS= 	}"; IFS=":"
+        for searchdir in $searchpath; do
+          if test -d "$searchdir"; then
+            case "$searchdir" in
+              */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+              */../ | */.. )
+                # Better ignore directories of this form. They are misleading.
+                ;;
+              *) searchdir=`cd "$searchdir" && pwd`
+                 case "$searchdir" in
+                   */lib64 ) acl_libdirstem=lib64 ;;
+                 esac ;;
+            esac
+          fi
+        done
+        IFS="$acl_save_IFS"
+      fi
+      ;;
+  esac
+  test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
+
+
+
+
+
+
+
+
+
+
+
+
+    use_additional=yes
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+
+# Check whether --with-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then :
+  withval=$with_libiconv_prefix;
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && ! test -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+
+fi
+
+      LIBICONV=
+  LTLIBICONV=
+  INCICONV=
+  LIBICONV_PREFIX=
+      HAVE_LIBICONV=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='iconv '
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
+          else
+                                    :
+          fi
+        else
+                              found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+                                    if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+                        if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                                    if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                                    if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+                                                        if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+              else
+                                                                                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                                if test "$acl_hardcode_direct" = yes; then
+                                                      LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                                                            haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                                                                                haveit=
+                    for x in $LDFLAGS $LIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                                                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                    else
+                                                                                                                                                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
+              else
+                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
+              fi
+            fi
+                        additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = 'iconv'; then
+                  LIBICONV_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = 'iconv'; then
+                  LIBICONV_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INCICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                                            INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+                        if test -n "$found_la"; then
+                                                        save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+                            for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                                                                                                                                                                if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                                                                  haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                                                                  haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
+                    LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+            LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+                        alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+            acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+    else
+            for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+            for found_dir in $ltrpathdirs; do
+      LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
+    done
+  fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
+$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
+if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFPreferences.h>
+int
+main ()
+{
+CFPreferencesCopyAppValue(NULL, NULL)
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFPreferencesCopyAppValue=yes
+else
+  gt_cv_func_CFPreferencesCopyAppValue=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
+$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+
+$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
+
+  fi
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
+$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
+if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyCurrent();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFLocaleCopyCurrent=yes
+else
+  gt_cv_func_CFLocaleCopyCurrent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
+$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
+  if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+
+$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
+
+  fi
+  INTL_MACOSX_LIBS=
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+    INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+  fi
+
+
+
+
+
+
+  LIBINTL=
+  LTLIBINTL=
+  POSUB=
+
+    case " $gt_needs " in
+    *" need-formatstring-macros "*) gt_api_version=3 ;;
+    *" need-ngettext "*) gt_api_version=2 ;;
+    *) gt_api_version=1 ;;
+  esac
+  gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+  gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+    if test "$USE_NLS" = "yes"; then
+    gt_use_preinstalled_gnugettext=no
+
+
+        if test $gt_api_version -ge 3; then
+          gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+'
+        else
+          gt_revision_test_code=
+        fi
+        if test $gt_api_version -ge 2; then
+          gt_expression_test_code=' + * ngettext ("", "", 0)'
+        else
+          gt_expression_test_code=
+        fi
+
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5
+$as_echo_n "checking for GNU gettext in libc... " >&6; }
+if eval \${$gt_func_gnugettext_libc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+
+int
+main ()
+{
+
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$gt_func_gnugettext_libc=yes"
+else
+  eval "$gt_func_gnugettext_libc=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$gt_func_gnugettext_libc
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+
+        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+
+
+
+
+
+          am_save_CPPFLAGS="$CPPFLAGS"
+
+  for element in $INCICONV; do
+    haveit=
+    for x in $CPPFLAGS; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+    fi
+  done
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
+$as_echo_n "checking for iconv... " >&6; }
+if ${am_cv_func_iconv+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    am_cv_func_iconv="no, consider installing GNU libiconv"
+    am_cv_lib_iconv=no
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#include <iconv.h>
+
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+           iconv(cd,NULL,NULL,NULL,NULL);
+           iconv_close(cd);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    if test "$am_cv_func_iconv" != yes; then
+      am_save_LIBS="$LIBS"
+      LIBS="$LIBS $LIBICONV"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#include <iconv.h>
+
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+             iconv(cd,NULL,NULL,NULL,NULL);
+             iconv_close(cd);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  am_cv_lib_iconv=yes
+        am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+      LIBS="$am_save_LIBS"
+    fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
+$as_echo "$am_cv_func_iconv" >&6; }
+  if test "$am_cv_func_iconv" = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5
+$as_echo_n "checking for working iconv... " >&6; }
+if ${am_cv_func_iconv_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+                  am_save_LIBS="$LIBS"
+      if test $am_cv_lib_iconv = yes; then
+        LIBS="$LIBS $LIBICONV"
+      fi
+      if test "$cross_compiling" = yes; then :
+
+         case "$host_os" in
+           aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+           *)            am_cv_func_iconv_works="guessing yes" ;;
+         esac
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <iconv.h>
+#include <string.h>
+int main ()
+{
+  int result = 0;
+  /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+     returns.  */
+  {
+    iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+    if (cd_utf8_to_88591 != (iconv_t)(-1))
+      {
+        static const char input[] = "\342\202\254"; /* EURO SIGN */
+        char buf[10];
+        const char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_utf8_to_88591,
+                            (char **) &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 1;
+        iconv_close (cd_utf8_to_88591);
+      }
+  }
+  /* Test against Solaris 10 bug: Failures are not distinguishable from
+     successful returns.  */
+  {
+    iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
+    if (cd_ascii_to_88591 != (iconv_t)(-1))
+      {
+        static const char input[] = "\263";
+        char buf[10];
+        const char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_ascii_to_88591,
+                            (char **) &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 2;
+        iconv_close (cd_ascii_to_88591);
+      }
+  }
+  /* Test against AIX 6.1..7.1 bug: Buffer overrun.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static const char input[] = "\304";
+        static char buf[2] = { (char)0xDE, (char)0xAD };
+        const char *inptr = input;
+        size_t inbytesleft = 1;
+        char *outptr = buf;
+        size_t outbytesleft = 1;
+        size_t res = iconv (cd_88591_to_utf8,
+                            (char **) &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
+          result |= 4;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#if 0 /* This bug could be worked around by the caller.  */
+  /* Test against HP-UX 11.11 bug: Positive return value instead of 0.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+        char buf[50];
+        const char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_88591_to_utf8,
+                            (char **) &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if ((int)res > 0)
+          result |= 8;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#endif
+  /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+     provided.  */
+  if (/* Try standardized names.  */
+      iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
+      /* Try IRIX, OSF/1 names.  */
+      && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
+      /* Try AIX names.  */
+      && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
+      /* Try HP-UX names.  */
+      && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
+    result |= 16;
+  return result;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  am_cv_func_iconv_works=yes
+else
+  am_cv_func_iconv_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+      LIBS="$am_save_LIBS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5
+$as_echo "$am_cv_func_iconv_works" >&6; }
+    case "$am_cv_func_iconv_works" in
+      *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+      *)   am_func_iconv=yes ;;
+    esac
+  else
+    am_func_iconv=no am_cv_lib_iconv=no
+  fi
+  if test "$am_func_iconv" = yes; then
+
+$as_echo "#define HAVE_ICONV 1" >>confdefs.h
+
+  fi
+  if test "$am_cv_lib_iconv" = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
+$as_echo_n "checking how to link with libiconv... " >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
+$as_echo "$LIBICONV" >&6; }
+  else
+            CPPFLAGS="$am_save_CPPFLAGS"
+    LIBICONV=
+    LTLIBICONV=
+  fi
+
+
+
+
+
+
+
+
+
+
+
+    use_additional=yes
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+
+# Check whether --with-libintl-prefix was given.
+if test "${with_libintl_prefix+set}" = set; then :
+  withval=$with_libintl_prefix;
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && ! test -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+
+fi
+
+      LIBINTL=
+  LTLIBINTL=
+  INCINTL=
+  LIBINTL_PREFIX=
+      HAVE_LIBINTL=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='intl '
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
+          else
+                                    :
+          fi
+        else
+                              found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+                                    if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+                        if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                                    if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                                    if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+                        LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+                                                        if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                                LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+              else
+                                                                                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                                if test "$acl_hardcode_direct" = yes; then
+                                                      LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                                                            LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                                                            haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                                                                                haveit=
+                    for x in $LDFLAGS $LIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                                                                                        LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                    else
+                                                                                                                                                                                LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                                LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
+              else
+                                                LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
+              fi
+            fi
+                        additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = 'intl'; then
+                  LIBINTL_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = 'intl'; then
+                  LIBINTL_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INCINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                                            INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+                        if test -n "$found_la"; then
+                                                        save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+                            for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                                                                                                                                                                if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                                                                  haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                                                                  haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                                        LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
+                    LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+                                                            LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+            LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+                        alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+            acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+    else
+            for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+            for found_dir in $ltrpathdirs; do
+      LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
+    done
+  fi
+
+
+
+
+
+
+          { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5
+$as_echo_n "checking for GNU gettext in libintl... " >&6; }
+if eval \${$gt_func_gnugettext_libintl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_CPPFLAGS="$CPPFLAGS"
+            CPPFLAGS="$CPPFLAGS $INCINTL"
+            gt_save_LIBS="$LIBS"
+            LIBS="$LIBS $LIBINTL"
+                        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+
+int
+main ()
+{
+
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$gt_func_gnugettext_libintl=yes"
+else
+  eval "$gt_func_gnugettext_libintl=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+                        if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+              LIBS="$LIBS $LIBICONV"
+              cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+
+int
+main ()
+{
+
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  LIBINTL="$LIBINTL $LIBICONV"
+                 LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+                 eval "$gt_func_gnugettext_libintl=yes"
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+            fi
+            CPPFLAGS="$gt_save_CPPFLAGS"
+            LIBS="$gt_save_LIBS"
+fi
+eval ac_res=\$$gt_func_gnugettext_libintl
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+        fi
+
+                                        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+           || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+                && test "$PACKAGE" != gettext-runtime \
+                && test "$PACKAGE" != gettext-tools; }; then
+          gt_use_preinstalled_gnugettext=yes
+        else
+                    LIBINTL=
+          LTLIBINTL=
+          INCINTL=
+        fi
+
+
+
+    if test -n "$INTL_MACOSX_LIBS"; then
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+                LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+        LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+      fi
+    fi
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes" \
+       || test "$nls_cv_use_gnu_gettext" = "yes"; then
+
+$as_echo "#define ENABLE_NLS 1" >>confdefs.h
+
+    else
+      USE_NLS=no
+    fi
+  fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5
+$as_echo_n "checking whether to use NLS... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+  if test "$USE_NLS" = "yes"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5
+$as_echo_n "checking where the gettext function comes from... " >&6; }
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        gt_source="external libintl"
+      else
+        gt_source="libc"
+      fi
+    else
+      gt_source="included intl directory"
+    fi
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5
+$as_echo "$gt_source" >&6; }
+  fi
+
+  if test "$USE_NLS" = "yes"; then
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5
+$as_echo_n "checking how to link with libintl... " >&6; }
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5
+$as_echo "$LIBINTL" >&6; }
+
+  for element in $INCINTL; do
+    haveit=
+    for x in $CPPFLAGS; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+    fi
+  done
+
+      fi
+
+
+$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h
+
+    fi
+
+        POSUB=po
+  fi
+
+
+
+    INTLLIBS="$LIBINTL"
+
+
+
+
+
+
+
+for ac_prog in 'bison -y' byacc
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_YACC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$YACC"; then
+  ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_YACC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+YACC=$ac_cv_prog_YACC
+if test -n "$YACC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $YACC" >&5
+$as_echo "$YACC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="yacc"
+
+for ac_prog in flex lex
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LEX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LEX"; then
+  ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_LEX="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LEX=$ac_cv_prog_LEX
+if test -n "$LEX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LEX" >&5
+$as_echo "$LEX" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$LEX" && break
+done
+test -n "$LEX" || LEX=":"
+
+if test "x$LEX" != "x:"; then
+  cat >conftest.l <<_ACEOF
+%%
+a { ECHO; }
+b { REJECT; }
+c { yymore (); }
+d { yyless (1); }
+e { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument.  */
+    yyless ((input () != 0)); }
+f { unput (yytext[0]); }
+. { BEGIN INITIAL; }
+%%
+#ifdef YYTEXT_POINTER
+extern char *yytext;
+#endif
+int
+main (void)
+{
+  return ! yylex () + ! yywrap ();
+}
+_ACEOF
+{ { ac_try="$LEX conftest.l"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$LEX conftest.l") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking lex output file root" >&5
+$as_echo_n "checking lex output file root... " >&6; }
+if ${ac_cv_prog_lex_root+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+if test -f lex.yy.c; then
+  ac_cv_prog_lex_root=lex.yy
+elif test -f lexyy.c; then
+  ac_cv_prog_lex_root=lexyy
+else
+  as_fn_error $? "cannot find output from $LEX; giving up" "$LINENO" 5
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_root" >&5
+$as_echo "$ac_cv_prog_lex_root" >&6; }
+LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
+
+if test -z "${LEXLIB+set}"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking lex library" >&5
+$as_echo_n "checking lex library... " >&6; }
+if ${ac_cv_lib_lex+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    ac_save_LIBS=$LIBS
+    ac_cv_lib_lex='none needed'
+    for ac_lib in '' -lfl -ll; do
+      LIBS="$ac_lib $ac_save_LIBS"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+`cat $LEX_OUTPUT_ROOT.c`
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_lex=$ac_lib
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+      test "$ac_cv_lib_lex" != 'none needed' && break
+    done
+    LIBS=$ac_save_LIBS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_lex" >&5
+$as_echo "$ac_cv_lib_lex" >&6; }
+  test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether yytext is a pointer" >&5
+$as_echo_n "checking whether yytext is a pointer... " >&6; }
+if ${ac_cv_prog_lex_yytext_pointer+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # POSIX says lex can declare yytext either as a pointer or an array; the
+# default is implementation-dependent.  Figure out which it is, since
+# not all implementations provide the %pointer and %array declarations.
+ac_cv_prog_lex_yytext_pointer=no
+ac_save_LIBS=$LIBS
+LIBS="$LEXLIB $ac_save_LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+  #define YYTEXT_POINTER 1
+`cat $LEX_OUTPUT_ROOT.c`
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_prog_lex_yytext_pointer=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_save_LIBS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_yytext_pointer" >&5
+$as_echo "$ac_cv_prog_lex_yytext_pointer" >&6; }
+if test $ac_cv_prog_lex_yytext_pointer = yes; then
+
+$as_echo "#define YYTEXT_POINTER 1" >>confdefs.h
+
+fi
+rm -f conftest.l $LEX_OUTPUT_ROOT.c
+
+fi
+if test "$LEX" = :; then
+  LEX=${am_missing_run}flex
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+  if test -n "$CCC"; then
+    CXX=$CCC
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CXX"; then
+  ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CXX" && break
+  done
+fi
+if test -z "$CXX"; then
+  ac_ct_CXX=$CXX
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CXX"; then
+  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CXX="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CXX" && break
+done
+
+  if test "x$ac_ct_CXX" = x; then
+    CXX="g++"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CXX=$ac_ct_CXX
+  fi
+fi
+
+  fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GXX=yes
+else
+  GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if ${ac_cv_prog_cxx_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+   ac_cxx_werror_flag=yes
+   ac_cv_prog_cxx_g=no
+   CXXFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_cv_prog_cxx_g=yes
+else
+  CXXFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+	 CXXFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+  CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+  if test "$GXX" = yes; then
+    CXXFLAGS="-g -O2"
+  else
+    CXXFLAGS="-g"
+  fi
+else
+  if test "$GXX" = yes; then
+    CXXFLAGS="-O2"
+  else
+    CXXFLAGS=
+  fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+func_stripname_cnf ()
+{
+  case $2 in
+  .*) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%\\\\$2\$%%"`;;
+  *)  func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%$2\$%%"`;;
+  esac
+} # func_stripname_cnf
+
+      if test -n "$CXX" && ( test no != "$CXX" &&
+    ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+    (test g++ != "$CXX"))); then
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+  if ${ac_cv_prog_CXXCPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CXXCPP needs to be expanded
+    for CXXCPP in "$CXX -E" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+  CXXCPP=$ac_cv_prog_CXXCPP
+else
+  ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+else
+  _lt_caught_CXX_error=yes
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+compiler_needs_object_CXX=no
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_direct_absolute_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+inherit_rpath_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+reload_flag_CXX=$reload_flag
+reload_cmds_CXX=$reload_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_caught_CXX_error"; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+  # save warnings/boilerplate of simple test code
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
+  compiler=$CC
+  compiler_CXX=$CC
+  func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
+
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test yes = "$GXX"; then
+      lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+    else
+      lt_prog_compiler_no_builtin_flag_CXX=
+    fi
+
+    if test yes = "$GXX"; then
+      # Set up default GNU C++ configuration
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test yes = "$GCC"; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return, which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD=$ac_prog
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test yes = "$with_gnu_ld"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD=$ac_dir/$ac_prog
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test no != "$with_gnu_ld" && break
+	;;
+      *)
+	test yes != "$with_gnu_ld" && break
+	;;
+      esac
+    fi
+  done
+  IFS=$lt_save_ifs
+else
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
+fi
+fi
+
+LD=$lt_cv_path_LD
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test yes = "$with_gnu_ld"; then
+        archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+        archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+
+        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+        export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='$wl'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+        else
+          whole_archive_flag_spec_CXX=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+    ld_shlibs_CXX=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+      aix[4-9]*)
+        if test ia64 = "$host_cpu"; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # have runtime linking enabled, and use it for executables.
+          # For shared libraries, we enable/disable runtime linking
+          # depending on the kind of the shared library created -
+          # when "with_aix_soname,aix_use_runtimelinking" is:
+          # "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "aix,yes"  lib.so          shared, rtl:yes, for executables
+          #            lib.a           static archive
+          # "both,no"  lib.so.V(shr.o) shared, rtl:yes
+          #            lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a(lib.so.V) shared, rtl:no
+          # "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a           static archive
+          case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	      # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	      # so we don't have lib.a shared libs to link our executables.
+	      # We have to force runtime linking in this case.
+	      aix_use_runtimelinking=yes
+	      LDFLAGS="$LDFLAGS -Wl,-brtl"
+	    fi
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        archive_cmds_CXX=''
+        hardcode_direct_CXX=yes
+        hardcode_direct_absolute_CXX=yes
+        hardcode_libdir_separator_CXX=':'
+        link_all_deplibs_CXX=yes
+        file_list_spec_CXX='$wl-f,'
+        case $with_aix_soname,$aix_use_runtimelinking in
+        aix,*) ;;	# no import file
+        svr4,* | *,yes) # use import file
+          # The Import File defines what to hardcode.
+          hardcode_direct_CXX=no
+          hardcode_direct_absolute_CXX=no
+          ;;
+        esac
+
+        if test yes = "$GXX"; then
+          case $host_os in aix4.[012]|aix4.[012].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`$CC -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    hardcode_direct_CXX=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    hardcode_minus_L_CXX=yes
+	    hardcode_libdir_flag_spec_CXX='-L$libdir'
+	    hardcode_libdir_separator_CXX=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag=$shared_flag' $wl-G'
+	  fi
+	  # Need to ensure runtime linking is disabled for the traditional
+	  # shared library, or the linker may eventually find shared libraries
+	  # /with/ Import File - we do not want to mix them.
+	  shared_flag_aix='-shared'
+	  shared_flag_svr4='-shared $wl-G'
+        else
+          # not using gcc
+          if test ia64 = "$host_cpu"; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test yes = "$aix_use_runtimelinking"; then
+	      shared_flag='$wl-G'
+	    else
+	      shared_flag='$wl-bM:SRE'
+	    fi
+	    shared_flag_aix='$wl-bM:SRE'
+	    shared_flag_svr4='$wl-G'
+          fi
+        fi
+
+        export_dynamic_flag_spec_CXX='$wl-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        always_export_symbols_CXX=yes
+	if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          # The "-G" linker flag allows undefined symbols.
+          no_undefined_flag_CXX='-bernotok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=/usr/lib:/lib
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+          hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
+
+          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+        else
+          if test ia64 = "$host_cpu"; then
+	    hardcode_libdir_flag_spec_CXX='$wl-R $libdir:/usr/lib:/lib'
+	    allow_undefined_flag_CXX="-z nodefs"
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=/usr/lib:/lib
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+	    hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    no_undefined_flag_CXX=' $wl-bernotok'
+	    allow_undefined_flag_CXX=' $wl-berok'
+	    if test yes = "$with_gnu_ld"; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      whole_archive_flag_spec_CXX='$convenience'
+	    fi
+	    archive_cmds_need_lc_CXX=yes
+	    archive_expsym_cmds_CXX='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	    # -brtl affects multiple linker settings, -berok does not and is overridden later
+	    compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+	    if test svr4 != "$with_aix_soname"; then
+	      # This is similar to how AIX traditionally builds its shared
+	      # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	    fi
+	    if test aix != "$with_aix_soname"; then
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	    else
+	      # used by -dlpreopen to get the symbols
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	    fi
+	    archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$RM -r $output_objdir/$realname.d'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  allow_undefined_flag_CXX=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+	case $GXX,$cc_basename in
+	,cl* | no,cl*)
+	  # Native MSVC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  hardcode_libdir_flag_spec_CXX=' '
+	  allow_undefined_flag_CXX=unsupported
+	  always_export_symbols_CXX=yes
+	  file_list_spec_CXX='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=.dll
+	  # FIXME: Setting linknames here is a bad hack.
+	  archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	  archive_expsym_cmds_CXX='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+              cp "$export_symbols" "$output_objdir/$soname.def";
+              echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+            else
+              $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+            fi~
+            $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+            linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
+	  enable_shared_with_static_runtimes_CXX=yes
+	  # Don't use ranlib
+	  old_postinstall_cmds_CXX='chmod 644 $oldlib'
+	  postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
+            lt_tool_outputfile="@TOOL_OUTPUT@"~
+            case $lt_outputfile in
+              *.exe|*.EXE) ;;
+              *)
+                lt_outputfile=$lt_outputfile.exe
+                lt_tool_outputfile=$lt_tool_outputfile.exe
+                ;;
+            esac~
+            func_to_tool_file "$lt_outputfile"~
+            if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+              $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+              $RM "$lt_outputfile.manifest";
+            fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  hardcode_libdir_flag_spec_CXX='-L$libdir'
+	  export_dynamic_flag_spec_CXX='$wl--export-all-symbols'
+	  allow_undefined_flag_CXX=unsupported
+	  always_export_symbols_CXX=no
+	  enable_shared_with_static_runtimes_CXX=yes
+
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file, use it as
+	    # is; otherwise, prepend EXPORTS...
+	    archive_expsym_cmds_CXX='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+              cp $export_symbols $output_objdir/$soname.def;
+            else
+              echo EXPORTS > $output_objdir/$soname.def;
+              cat $export_symbols >> $output_objdir/$soname.def;
+            fi~
+            $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    ld_shlibs_CXX=no
+	  fi
+	  ;;
+	esac
+	;;
+      darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc_CXX=no
+  hardcode_direct_CXX=no
+  hardcode_automatic_CXX=yes
+  hardcode_shlibpath_var_CXX=unsupported
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec_CXX=''
+  fi
+  link_all_deplibs_CXX=yes
+  allow_undefined_flag_CXX=$_lt_dar_allow_undefined
+  case $cc_basename in
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test yes = "$_lt_dar_can_shared"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds_CXX="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+       if test yes != "$lt_cv_apple_cc_single_mod"; then
+      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+      archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
+    fi
+
+  else
+  ld_shlibs_CXX=no
+  fi
+
+	;;
+
+      os2*)
+	hardcode_libdir_flag_spec_CXX='-L$libdir'
+	hardcode_minus_L_CXX=yes
+	allow_undefined_flag_CXX=unsupported
+	shrext_cmds=.dll
+	archive_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	archive_expsym_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  prefix_cmds="$SED"~
+	  if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	    prefix_cmds="$prefix_cmds -e 1d";
+	  fi~
+	  prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	  cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	old_archive_From_new_cmds_CXX='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+	enable_shared_with_static_runtimes_CXX=yes
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      freebsd2.*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        ld_shlibs_CXX=no
+        ;;
+
+      freebsd-elf*)
+        archive_cmds_need_lc_CXX=no
+        ;;
+
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        ld_shlibs_CXX=yes
+        ;;
+
+      haiku*)
+        archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+        link_all_deplibs_CXX=yes
+        ;;
+
+      hpux9*)
+        hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
+        hardcode_libdir_separator_CXX=:
+        export_dynamic_flag_spec_CXX='$wl-E'
+        hardcode_direct_CXX=yes
+        hardcode_minus_L_CXX=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            ld_shlibs_CXX=no
+            ;;
+          aCC*)
+            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            ;;
+          *)
+            if test yes = "$GXX"; then
+              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              ld_shlibs_CXX=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test no = "$with_gnu_ld"; then
+	  hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
+	  hardcode_libdir_separator_CXX=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      export_dynamic_flag_spec_CXX='$wl-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            hardcode_direct_CXX=no
+            hardcode_shlibpath_var_CXX=no
+            ;;
+          *)
+            hardcode_direct_CXX=yes
+            hardcode_direct_absolute_CXX=yes
+            hardcode_minus_L_CXX=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+          *)
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        case $host_cpu in
+	          hppa*64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[3-9]*)
+	hardcode_direct_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='$wl-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	archive_expsym_cmds_CXX='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	      else
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
+	      fi
+	    fi
+	    link_all_deplibs_CXX=yes
+	    ;;
+        esac
+        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+        hardcode_libdir_separator_CXX=:
+        inherit_rpath_CXX=yes
+        ;;
+
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    archive_cmds_need_lc_CXX=no
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
+	      prelink_cmds_CXX='tpldir=Template.dir~
+               rm -rf $tpldir~
+               $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+               compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+	      old_archive_cmds_CXX='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+                $RANLIB $oldlib'
+	      archive_cmds_CXX='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      archive_expsym_cmds_CXX='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 and above use weak symbols
+	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    hardcode_libdir_flag_spec_CXX='$wl--rpath $wl$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    whole_archive_flag_spec_CXX='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname  -o $lib $wl-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	    hardcode_libdir_separator_CXX=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    ;;
+	  xl* | mpixl* | bgxl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    if test yes = "$supports_anon_versioning"; then
+	      archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
+                cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+                echo "local: *; };" >> $output_objdir/$libname.ver~
+                $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      no_undefined_flag_CXX=' -zdefs'
+	      archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      archive_expsym_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
+	      hardcode_libdir_flag_spec_CXX='-R$libdir'
+	      whole_archive_flag_spec_CXX='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	      compiler_needs_object_CXX=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='func_echo_all'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  hardcode_libdir_flag_spec_CXX='-R$libdir'
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        ld_shlibs_CXX=yes
+	;;
+
+      openbsd* | bitrig*)
+	if test -f /usr/libexec/ld.so; then
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	  hardcode_direct_absolute_CXX=yes
+	  archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+	    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+	    export_dynamic_flag_spec_CXX='$wl-E'
+	    whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=func_echo_all
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    hardcode_libdir_separator_CXX=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
+	        archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+		;;
+	      *)
+	        allow_undefined_flag_CXX=' -expect_unresolved \*'
+	        archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+                  echo "-hidden">> $lib.exp~
+                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+                  $RM $lib.exp'
+	        hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+		;;
+	    esac
+
+	    hardcode_libdir_separator_CXX=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+	  *)
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
+	      case $host in
+	        osf3*)
+	          archive_cmds_CXX='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+		  ;;
+	        *)
+	          archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+	      hardcode_libdir_separator_CXX=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            archive_cmds_need_lc_CXX=yes
+	    no_undefined_flag_CXX=' -zdefs'
+	    archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+              $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    hardcode_libdir_flag_spec_CXX='-R$libdir'
+	    hardcode_shlibpath_var_CXX=no
+	    case $host_os in
+	      solaris2.[0-5] | solaris2.[0-5].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands '-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    link_all_deplibs_CXX=yes
+
+	    output_verbose_link_cmd='func_echo_all'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      no_undefined_flag_CXX=' $wl-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+                  $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require '-G' NOT '-shared' on this
+	        # platform.
+	        archive_cmds_CXX='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+                  $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      fi
+
+	      hardcode_libdir_flag_spec_CXX='$wl-R $wl$libdir'
+	      case $host_os in
+		solaris2.[0-5] | solaris2.[0-5].*) ;;
+		*)
+		  whole_archive_flag_spec_CXX='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_CXX='$wl-z,text'
+      archive_cmds_need_lc_CXX=no
+      hardcode_shlibpath_var_CXX=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We CANNOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	no_undefined_flag_CXX='$wl-z,text'
+	allow_undefined_flag_CXX='$wl-z,nodefs'
+	archive_cmds_need_lc_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='$wl-R,$libdir'
+	hardcode_libdir_separator_CXX=':'
+	link_all_deplibs_CXX=yes
+	export_dynamic_flag_spec_CXX='$wl-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
+              '"$old_archive_cmds_CXX"
+	    reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
+              '"$reload_cmds_CXX"
+	    ;;
+	  *)
+	    archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+    esac
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+    test no = "$ld_shlibs_CXX" && can_build_shared=no
+
+    GCC_CXX=$GXX
+    LD_CXX=$LD
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    # Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+
+cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case $prev$p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test x-L = "$p" ||
+          test x-R = "$p"; then
+	 prev=$p
+	 continue
+       fi
+
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
+       if test no = "$pre_test_object_deps_done"; then
+	 case $prev in
+	 -L | -R)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$compiler_lib_search_path_CXX"; then
+	     compiler_lib_search_path_CXX=$prev$p
+	   else
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} $prev$p"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$postdeps_CXX"; then
+	   postdeps_CXX=$prev$p
+	 else
+	   postdeps_CXX="${postdeps_CXX} $prev$p"
+	 fi
+       fi
+       prev=
+       ;;
+
+    *.lto.$objext) ;; # Ignore GCC LTO objects
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test no = "$pre_test_object_deps_done"; then
+	 if test -z "$predep_objects_CXX"; then
+	   predep_objects_CXX=$p
+	 else
+	   predep_objects_CXX="$predep_objects_CXX $p"
+	 fi
+       else
+	 if test -z "$postdep_objects_CXX"; then
+	   postdep_objects_CXX=$p
+	 else
+	   postdep_objects_CXX="$postdep_objects_CXX $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix[3-9]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  predep_objects_CXX=
+  postdep_objects_CXX=
+  postdeps_CXX=
+  ;;
+esac
+
+
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+ compiler_lib_search_dirs_CXX=
+if test -n "${compiler_lib_search_path_CXX}"; then
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | $SED -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+
+  # C++ specific cases for pic, static, wl, etc.
+  if test yes = "$GXX"; then
+    lt_prog_compiler_wl_CXX='-Wl,'
+    lt_prog_compiler_static_CXX='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_CXX='-Bstatic'
+      fi
+      lt_prog_compiler_pic_CXX='-fPIC'
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic_CXX='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
+            lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static_CXX='$wl-static'
+	;;
+      esac
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_CXX='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      lt_prog_compiler_pic_CXX=
+      ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static_CXX=
+      ;;
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_CXX=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	;;
+      *)
+	lt_prog_compiler_pic_CXX='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_CXX='-fPIC -shared'
+      ;;
+    *)
+      lt_prog_compiler_pic_CXX='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[4-9]*)
+	# All AIX code is PIC.
+	if test ia64 = "$host_cpu"; then
+	  # AIX 5 now supports IA64 processor
+	  lt_prog_compiler_static_CXX='-Bstatic'
+	else
+	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+	;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
+	    if test ia64 != "$host_cpu"; then
+	      lt_prog_compiler_pic_CXX='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      lt_prog_compiler_pic_CXX='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64, which still supported -KPIC.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fpic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  xlc* | xlC* | bgxl[cC]* | mpixl[cC]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-qpic'
+	    lt_prog_compiler_static_CXX='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      lt_prog_compiler_pic_CXX='-KPIC'
+	      lt_prog_compiler_static_CXX='-Bstatic'
+	      lt_prog_compiler_wl_CXX='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    lt_prog_compiler_pic_CXX='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd*)
+	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        lt_prog_compiler_pic_CXX='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    lt_prog_compiler_wl_CXX='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    lt_prog_compiler_pic_CXX='-pic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	lt_prog_compiler_can_build_shared_CXX=no
+	;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms that do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_CXX=
+    ;;
+  *)
+    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; }
+lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works_CXX=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"  ## exclude from sc_useless_quotes_in_assignment
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_CXX=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_pic_works_CXX"; then
+    case $lt_prog_compiler_pic_CXX in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+     esac
+else
+    lt_prog_compiler_pic_CXX=
+     lt_prog_compiler_can_build_shared_CXX=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_CXX=no
+   save_LDFLAGS=$LDFLAGS
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_CXX=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_CXX=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_static_works_CXX"; then
+    :
+else
+    lt_prog_compiler_static_CXX=
+fi
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o_CXX" && test no != "$need_locks"; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test no = "$hard_links"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  case $host_os in
+  aix[4-9]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+    # Without the "-l" option, or with the "-B" option, AIX nm treats
+    # weak defined symbols like other global defined symbols, whereas
+    # GNU nm marks them as "W".
+    # While the 'weak' keyword is ignored in the Export File, we need
+    # it in the Import File for the 'aix-soname' feature, so we have
+    # to replace the "-B" option with "-P" for AIX nm.
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+    else
+      export_symbols_cmds_CXX='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    export_symbols_cmds_CXX=$ltdll_cmds
+    ;;
+  cygwin* | mingw* | cegcc*)
+    case $cc_basename in
+    cl*)
+      exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+      ;;
+    esac
+    ;;
+  *)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    ;;
+  esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+test no = "$ld_shlibs_CXX" && can_build_shared=no
+
+with_gnu_ld_CXX=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_CXX=yes
+
+  if test yes,yes = "$GCC,$enable_shared"; then
+    case $archive_cmds_CXX in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl_CXX
+	  pic_flag=$lt_prog_compiler_pic_CXX
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+	  allow_undefined_flag_CXX=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc_CXX=no
+	  else
+	    lt_cv_archive_cmds_need_lc_CXX=yes
+	  fi
+	  allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; }
+      archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=.so
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='$libname$release$shared_ext$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test ia64 = "$host_cpu"; then
+    # AIX 5 supports IA64
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='$libname$shared_ext'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec=$LIB
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
+    fi
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test yes = "$lt_cv_prog_gnu_ld"; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec_CXX='-L$libdir'
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd* | bitrig*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec=/usr/lib
+  need_lib_prefix=no
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
+  else
+    need_version=yes
+  fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+os2*)
+  libname_spec='$name'
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test yes = "$with_gnu_ld"; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec; then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=sco
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test yes = "$with_gnu_ld"; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test no = "$dynamic_linker" && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test yes = "$GCC"; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
+fi
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
+fi
+
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" ||
+   test -n "$runpath_var_CXX" ||
+   test yes = "$hardcode_automatic_CXX"; then
+
+  # We can hardcode non-existent directories.
+  if test no != "$hardcode_direct_CXX" &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" &&
+     test no != "$hardcode_minus_L_CXX"; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_CXX=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_CXX=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_CXX=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
+$as_echo "$hardcode_action_CXX" >&6; }
+
+if test relink = "$hardcode_action_CXX" ||
+   test yes = "$inherit_rpath_CXX"; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test yes != "$_lt_caught_CXX_error"
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+depcc="$CXX"  am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CXX_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CXX_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CXX_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+  am__fastdepCXX_TRUE=
+  am__fastdepCXX_FALSE='#'
+else
+  am__fastdepCXX_TRUE='#'
+  am__fastdepCXX_FALSE=
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+
+
+# Extract the first word of "bison", so it can be a program name with args.
+set dummy bison; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_BISON+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $BISON in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_BISON="$BISON" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_BISON="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_BISON" && ac_cv_path_BISON="no"
+  ;;
+esac
+fi
+BISON=$ac_cv_path_BISON
+if test -n "$BISON"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BISON" >&5
+$as_echo "$BISON" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+if test "$BISON" != no; then :
+
+else
+   BISON=\${top_srcdir}/build-aux/missing bison
+
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: no bison program found: only required for maintainers" >&5
+$as_echo "$as_me: no bison program found: only required for maintainers" >&6;}
+
+fi
+
+# Extract the first word of "help2man", so it can be a program name with args.
+set dummy help2man; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_HELP2MAN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $HELP2MAN in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_HELP2MAN="$HELP2MAN" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_HELP2MAN="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_HELP2MAN" && ac_cv_path_HELP2MAN="\${top_srcdir}/build-aux/missing help2man"
+  ;;
+esac
+fi
+HELP2MAN=$ac_cv_path_HELP2MAN
+if test -n "$HELP2MAN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HELP2MAN" >&5
+$as_echo "$HELP2MAN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  if test -z "$ac_cv_path_HELP2MAN" ; then :
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: program not found: help2man: building man page will not work" >&5
+$as_echo "$as_me: WARNING: program not found: help2man: building man page will not work" >&2;}
+
+fi
+
+for ac_prog in gtexi2dvi texi2dvi
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_TEXI2DVI+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $TEXI2DVI in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_TEXI2DVI="$TEXI2DVI" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_TEXI2DVI="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+TEXI2DVI=$ac_cv_path_TEXI2DVI
+if test -n "$TEXI2DVI"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEXI2DVI" >&5
+$as_echo "$TEXI2DVI" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$TEXI2DVI" && break
+done
+test -n "$TEXI2DVI" || TEXI2DVI="\${top_srcdir}/build-aux/missing texi2dvi"
+
+  if test -z "$ac_cv_path_TEXI2DVI" ; then :
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: texi2dvi: program not found: building pdf version of manual will not work" >&5
+$as_echo "$as_me: WARNING: texi2dvi: program not found: building pdf version of manual will not work" >&2;}
+
+fi
+
+# Check for a m4 that supports -P
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for m4 that supports -P" >&5
+$as_echo_n "checking for m4 that supports -P... " >&6; }
+if ${ac_cv_path_M4+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$M4"; then
+  ac_path_M4_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in gm4 gnum4 m4; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_M4="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_M4" || continue
+m4out=`echo 'm''4_divnum' | $ac_path_M4 -P`
+                test "x$m4out" = x0 \
+                && ac_cv_path_M4=$ac_path_M4 ac_path_M4_found=:
+      $ac_path_M4_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_M4"; then
+    as_fn_error $? "could not find m4 that supports -P" "$LINENO" 5
+  fi
+else
+  ac_cv_path_M4=$M4
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_M4" >&5
+$as_echo "$ac_cv_path_M4" >&6; }
+M4=$ac_cv_path_M4
+
+
+cat >>confdefs.h <<_ACEOF
+#define M4 "$M4"
+_ACEOF
+
+
+# Extract the first word of "indent", so it can be a program name with args.
+set dummy indent; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_INDENT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $INDENT in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_INDENT="$INDENT" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_INDENT="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_INDENT" && ac_cv_path_INDENT="indent"
+  ;;
+esac
+fi
+INDENT=$ac_cv_path_INDENT
+if test -n "$INDENT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INDENT" >&5
+$as_echo "$INDENT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+# if INDENT is set to 'indent' then we didn't find indent
+if test "$INDENT" != indent ; then
+   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $INDENT is GNU indent" >&5
+$as_echo_n "checking if $INDENT is GNU indent... " >&6; }
+   if $INDENT --version 2>/dev/null | head -n 1|grep "GNU indent" > /dev/null ; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+   else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $INDENT does not appear to be GNU indent." >&5
+$as_echo "$as_me: WARNING: $INDENT does not appear to be GNU indent." >&2;}
+   fi
+else
+   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: no indent program found: make indent target will not function" >&5
+$as_echo "$as_me: WARNING: no indent program found: make indent target will not function" >&2;}
+fi
+
+# checks for headers
+
+for ac_header in inttypes.h libintl.h limits.h locale.h malloc.h netinet/in.h regex.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+# checks for libraries
+
+# The test test-pthread uses libpthread, so we check for it here, but
+# all we need is the preprocessor symbol defined since we don't need
+# LIBS to include libpthread for building flex.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_mutex_lock in -lpthread" >&5
+$as_echo_n "checking for pthread_mutex_lock in -lpthread... " >&6; }
+if ${ac_cv_lib_pthread_pthread_mutex_lock+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lpthread  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pthread_mutex_lock ();
+int
+main ()
+{
+return pthread_mutex_lock ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_pthread_pthread_mutex_lock=yes
+else
+  ac_cv_lib_pthread_pthread_mutex_lock=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_mutex_lock" >&5
+$as_echo "$ac_cv_lib_pthread_pthread_mutex_lock" >&6; }
+if test "x$ac_cv_lib_pthread_pthread_mutex_lock" = xyes; then :
+
+$as_echo "#define HAVE_LIBPTHREAD 1" >>confdefs.h
+
+else
+
+$as_echo "#define HAVE_LIBPTHREAD 0" >>confdefs.h
+
+
+fi
+
+for ac_header in pthread.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "pthread.h" "ac_cv_header_pthread_h" "$ac_includes_default"
+if test "x$ac_cv_header_pthread_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_PTHREAD_H 1
+_ACEOF
+
+fi
+
+done
+
+ if test x$ac_cv_lib_pthread_pthread_mutex_lock = xyes; then
+  want_pthread_TRUE=
+  want_pthread_FALSE='#'
+else
+  want_pthread_TRUE='#'
+  want_pthread_FALSE=
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for log10 in -lm" >&5
+$as_echo_n "checking for log10 in -lm... " >&6; }
+if ${ac_cv_lib_m_log10+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char log10 ();
+int
+main ()
+{
+return log10 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_m_log10=yes
+else
+  ac_cv_lib_m_log10=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_log10" >&5
+$as_echo "$ac_cv_lib_m_log10" >&6; }
+if test "x$ac_cv_lib_m_log10" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBM 1
+_ACEOF
+
+  LIBS="-lm $LIBS"
+
+fi
+
+
+# Checks for typedefs, structures, and compiler characteristics.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for stdbool.h that conforms to C99" >&5
+$as_echo_n "checking for stdbool.h that conforms to C99... " >&6; }
+if ${ac_cv_header_stdbool_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+             #include <stdbool.h>
+             #ifndef bool
+              "error: bool is not defined"
+             #endif
+             #ifndef false
+              "error: false is not defined"
+             #endif
+             #if false
+              "error: false is not 0"
+             #endif
+             #ifndef true
+              "error: true is not defined"
+             #endif
+             #if true != 1
+              "error: true is not 1"
+             #endif
+             #ifndef __bool_true_false_are_defined
+              "error: __bool_true_false_are_defined is not defined"
+             #endif
+
+             struct s { _Bool s: 1; _Bool t; } s;
+
+             char a[true == 1 ? 1 : -1];
+             char b[false == 0 ? 1 : -1];
+             char c[__bool_true_false_are_defined == 1 ? 1 : -1];
+             char d[(bool) 0.5 == true ? 1 : -1];
+             /* See body of main program for 'e'.  */
+             char f[(_Bool) 0.0 == false ? 1 : -1];
+             char g[true];
+             char h[sizeof (_Bool)];
+             char i[sizeof s.t];
+             enum { j = false, k = true, l = false * true, m = true * 256 };
+             /* The following fails for
+                HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */
+             _Bool n[m];
+             char o[sizeof n == m * sizeof n[0] ? 1 : -1];
+             char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1];
+             /* Catch a bug in an HP-UX C compiler.  See
+                http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html
+                http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html
+              */
+             _Bool q = true;
+             _Bool *pq = &q;
+
+int
+main ()
+{
+
+             bool e = &s;
+             *pq |= q;
+             *pq |= ! q;
+             /* Refer to every declared value, to avoid compiler optimizations.  */
+             return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l
+                     + !m + !n + !o + !p + !q + !pq);
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdbool_h=yes
+else
+  ac_cv_header_stdbool_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdbool_h" >&5
+$as_echo "$ac_cv_header_stdbool_h" >&6; }
+   ac_fn_c_check_type "$LINENO" "_Bool" "ac_cv_type__Bool" "$ac_includes_default"
+if test "x$ac_cv_type__Bool" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE__BOOL 1
+_ACEOF
+
+
+fi
+
+
+if test $ac_cv_header_stdbool_h = yes; then
+
+$as_echo "#define HAVE_STDBOOL_H 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
+$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
+if ${ac_cv_c_const+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+#ifndef __cplusplus
+  /* Ultrix mips cc rejects this sort of thing.  */
+  typedef int charset[2];
+  const charset cs = { 0, 0 };
+  /* SunOS 4.1.1 cc rejects this.  */
+  char const *const *pcpcc;
+  char **ppc;
+  /* NEC SVR4.0.2 mips cc rejects this.  */
+  struct point {int x, y;};
+  static struct point const zero = {0,0};
+  /* AIX XL C 1.02.0.0 rejects this.
+     It does not let you subtract one const X* pointer from another in
+     an arm of an if-expression whose if-part is not a constant
+     expression */
+  const char *g = "string";
+  pcpcc = &g + (g ? g-g : 0);
+  /* HPUX 7.0 cc rejects these. */
+  ++pcpcc;
+  ppc = (char**) pcpcc;
+  pcpcc = (char const *const *) ppc;
+  { /* SCO 3.2v4 cc rejects this sort of thing.  */
+    char tx;
+    char *t = &tx;
+    char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+    *t++ = 0;
+    if (s) return 0;
+  }
+  { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+    int x[] = {25, 17};
+    const int *foo = &x[0];
+    ++foo;
+  }
+  { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+    typedef const int *iptr;
+    iptr p = 0;
+    ++p;
+  }
+  { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
+       "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+    struct s { int j; const int *ap[3]; } bx;
+    struct s *b = &bx; b->j = 5;
+  }
+  { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+    const int foo = 10;
+    if (!foo) return 0;
+  }
+  return !cs[0] && !zero.x;
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_const=yes
+else
+  ac_cv_c_const=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
+$as_echo "$ac_cv_c_const" >&6; }
+if test $ac_cv_c_const = no; then
+
+$as_echo "#define const /**/" >>confdefs.h
+
+fi
+
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
+
+fi
+
+
+# Checks for library functions.
+
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments.  Useless!
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
+$as_echo_n "checking for working alloca.h... " >&6; }
+if ${ac_cv_working_alloca_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <alloca.h>
+int
+main ()
+{
+char *p = (char *) alloca (2 * sizeof (int));
+			  if (p) return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_working_alloca_h=yes
+else
+  ac_cv_working_alloca_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5
+$as_echo "$ac_cv_working_alloca_h" >&6; }
+if test $ac_cv_working_alloca_h = yes; then
+
+$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
+$as_echo_n "checking for alloca... " >&6; }
+if ${ac_cv_func_alloca_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+#  include <malloc.h>
+#  define alloca _alloca
+# else
+#  ifdef HAVE_ALLOCA_H
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+#    ifndef alloca /* predefined by HP cc +Olibcalls */
+void *alloca (size_t);
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+int
+main ()
+{
+char *p = (char *) alloca (1);
+				    if (p) return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_func_alloca_works=yes
+else
+  ac_cv_func_alloca_works=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5
+$as_echo "$ac_cv_func_alloca_works" >&6; }
+
+if test $ac_cv_func_alloca_works = yes; then
+
+$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h
+
+else
+  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+# that cause trouble.  Some versions do not even contain alloca or
+# contain a buggy version.  If you still want to use their alloca,
+# use ar to extract alloca.o from them instead of compiling alloca.c.
+
+ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
+
+$as_echo "#define C_ALLOCA 1" >>confdefs.h
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
+$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
+if ${ac_cv_os_cray+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined CRAY && ! defined CRAY2
+webecray
+#else
+wenotbecray
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "webecray" >/dev/null 2>&1; then :
+  ac_cv_os_cray=yes
+else
+  ac_cv_os_cray=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5
+$as_echo "$ac_cv_os_cray" >&6; }
+if test $ac_cv_os_cray = yes; then
+  for ac_func in _getb67 GETB67 getb67; do
+    as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+
+cat >>confdefs.h <<_ACEOF
+#define CRAY_STACKSEG_END $ac_func
+_ACEOF
+
+    break
+fi
+
+  done
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
+$as_echo_n "checking stack direction for C alloca... " >&6; }
+if ${ac_cv_c_stack_direction+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_c_stack_direction=0
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+find_stack_direction (int *addr, int depth)
+{
+  int dir, dummy = 0;
+  if (! addr)
+    addr = &dummy;
+  *addr = addr < &dummy ? 1 : addr == &dummy ? 0 : -1;
+  dir = depth ? find_stack_direction (addr, depth - 1) : 0;
+  return dir + dummy;
+}
+
+int
+main (int argc, char **argv)
+{
+  return find_stack_direction (0, argc + !argv + 20) < 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_c_stack_direction=1
+else
+  ac_cv_c_stack_direction=-1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5
+$as_echo "$ac_cv_c_stack_direction" >&6; }
+cat >>confdefs.h <<_ACEOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+_ACEOF
+
+
+fi
+
+ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default"
+if test "x$ac_cv_type_pid_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define pid_t int
+_ACEOF
+
+fi
+
+for ac_header in vfork.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "vfork.h" "ac_cv_header_vfork_h" "$ac_includes_default"
+if test "x$ac_cv_header_vfork_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_VFORK_H 1
+_ACEOF
+
+fi
+
+done
+
+for ac_func in fork vfork
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+if test "x$ac_cv_func_fork" = xyes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5
+$as_echo_n "checking for working fork... " >&6; }
+if ${ac_cv_func_fork_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_fork_works=cross
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+
+	  /* By Ruediger Kuhlmann. */
+	  return fork () < 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_fork_works=yes
+else
+  ac_cv_func_fork_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_fork_works" >&5
+$as_echo "$ac_cv_func_fork_works" >&6; }
+
+else
+  ac_cv_func_fork_works=$ac_cv_func_fork
+fi
+if test "x$ac_cv_func_fork_works" = xcross; then
+  case $host in
+    *-*-amigaos* | *-*-msdosdjgpp*)
+      # Override, as these systems have only a dummy fork() stub
+      ac_cv_func_fork_works=no
+      ;;
+    *)
+      ac_cv_func_fork_works=yes
+      ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5
+$as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;}
+fi
+ac_cv_func_vfork_works=$ac_cv_func_vfork
+if test "x$ac_cv_func_vfork" = xyes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5
+$as_echo_n "checking for working vfork... " >&6; }
+if ${ac_cv_func_vfork_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_vfork_works=cross
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Thanks to Paul Eggert for this test.  */
+$ac_includes_default
+#include <sys/wait.h>
+#ifdef HAVE_VFORK_H
+# include <vfork.h>
+#endif
+/* On some sparc systems, changes by the child to local and incoming
+   argument registers are propagated back to the parent.  The compiler
+   is told about this with #include <vfork.h>, but some compilers
+   (e.g. gcc -O) don't grok <vfork.h>.  Test for this by using a
+   static variable whose address is put into a register that is
+   clobbered by the vfork.  */
+static void
+#ifdef __cplusplus
+sparc_address_test (int arg)
+# else
+sparc_address_test (arg) int arg;
+#endif
+{
+  static pid_t child;
+  if (!child) {
+    child = vfork ();
+    if (child < 0) {
+      perror ("vfork");
+      _exit(2);
+    }
+    if (!child) {
+      arg = getpid();
+      write(-1, "", 0);
+      _exit (arg);
+    }
+  }
+}
+
+int
+main ()
+{
+  pid_t parent = getpid ();
+  pid_t child;
+
+  sparc_address_test (0);
+
+  child = vfork ();
+
+  if (child == 0) {
+    /* Here is another test for sparc vfork register problems.  This
+       test uses lots of local variables, at least as many local
+       variables as main has allocated so far including compiler
+       temporaries.  4 locals are enough for gcc 1.40.3 on a Solaris
+       4.1.3 sparc, but we use 8 to be safe.  A buggy compiler should
+       reuse the register of parent for one of the local variables,
+       since it will think that parent can't possibly be used any more
+       in this routine.  Assigning to the local variable will thus
+       munge parent in the parent process.  */
+    pid_t
+      p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(),
+      p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid();
+    /* Convince the compiler that p..p7 are live; otherwise, it might
+       use the same hardware register for all 8 local variables.  */
+    if (p != p1 || p != p2 || p != p3 || p != p4
+	|| p != p5 || p != p6 || p != p7)
+      _exit(1);
+
+    /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent
+       from child file descriptors.  If the child closes a descriptor
+       before it execs or exits, this munges the parent's descriptor
+       as well.  Test for this by closing stdout in the child.  */
+    _exit(close(fileno(stdout)) != 0);
+  } else {
+    int status;
+    struct stat st;
+
+    while (wait(&status) != child)
+      ;
+    return (
+	 /* Was there some problem with vforking?  */
+	 child < 0
+
+	 /* Did the child fail?  (This shouldn't happen.)  */
+	 || status
+
+	 /* Did the vfork/compiler bug occur?  */
+	 || parent != getpid()
+
+	 /* Did the file descriptor bug occur?  */
+	 || fstat(fileno(stdout), &st) != 0
+	 );
+  }
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_vfork_works=yes
+else
+  ac_cv_func_vfork_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vfork_works" >&5
+$as_echo "$ac_cv_func_vfork_works" >&6; }
+
+fi;
+if test "x$ac_cv_func_fork_works" = xcross; then
+  ac_cv_func_vfork_works=$ac_cv_func_vfork
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5
+$as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;}
+fi
+
+if test "x$ac_cv_func_vfork_works" = xyes; then
+
+$as_echo "#define HAVE_WORKING_VFORK 1" >>confdefs.h
+
+else
+
+$as_echo "#define vfork fork" >>confdefs.h
+
+fi
+if test "x$ac_cv_func_fork_works" = xyes; then
+
+$as_echo "#define HAVE_WORKING_FORK 1" >>confdefs.h
+
+fi
+
+for ac_header in stdlib.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_stdlib_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_STDLIB_H 1
+_ACEOF
+
+fi
+
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible malloc" >&5
+$as_echo_n "checking for GNU libc compatible malloc... " >&6; }
+if ${ac_cv_func_malloc_0_nonnull+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_malloc_0_nonnull=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined STDC_HEADERS || defined HAVE_STDLIB_H
+# include <stdlib.h>
+#else
+char *malloc ();
+#endif
+
+int
+main ()
+{
+return ! malloc (0);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_malloc_0_nonnull=yes
+else
+  ac_cv_func_malloc_0_nonnull=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_malloc_0_nonnull" >&5
+$as_echo "$ac_cv_func_malloc_0_nonnull" >&6; }
+if test $ac_cv_func_malloc_0_nonnull = yes; then :
+
+$as_echo "#define HAVE_MALLOC 1" >>confdefs.h
+
+else
+  $as_echo "#define HAVE_MALLOC 0" >>confdefs.h
+
+   case " $LIBOBJS " in
+  *" malloc.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS malloc.$ac_objext"
+ ;;
+esac
+
+
+$as_echo "#define malloc rpl_malloc" >>confdefs.h
+
+fi
+
+
+for ac_header in stdlib.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_stdlib_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_STDLIB_H 1
+_ACEOF
+
+fi
+
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible realloc" >&5
+$as_echo_n "checking for GNU libc compatible realloc... " >&6; }
+if ${ac_cv_func_realloc_0_nonnull+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_realloc_0_nonnull=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined STDC_HEADERS || defined HAVE_STDLIB_H
+# include <stdlib.h>
+#else
+char *realloc ();
+#endif
+
+int
+main ()
+{
+return ! realloc (0, 0);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_realloc_0_nonnull=yes
+else
+  ac_cv_func_realloc_0_nonnull=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_realloc_0_nonnull" >&5
+$as_echo "$ac_cv_func_realloc_0_nonnull" >&6; }
+if test $ac_cv_func_realloc_0_nonnull = yes; then :
+
+$as_echo "#define HAVE_REALLOC 1" >>confdefs.h
+
+else
+  $as_echo "#define HAVE_REALLOC 0" >>confdefs.h
+
+   case " $LIBOBJS " in
+  *" realloc.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS realloc.$ac_objext"
+ ;;
+esac
+
+
+$as_echo "#define realloc rpl_realloc" >>confdefs.h
+
+fi
+
+
+
+for ac_func in dup2 memset pow regcomp setlocale strchr strdup strtol
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+ac_fn_c_check_func "$LINENO" "reallocarray" "ac_cv_func_reallocarray"
+if test "x$ac_cv_func_reallocarray" = xyes; then :
+  $as_echo "#define HAVE_REALLOCARRAY 1" >>confdefs.h
+
+else
+  case " $LIBOBJS " in
+  *" reallocarray.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS reallocarray.$ac_objext"
+ ;;
+esac
+
+fi
+
+
+
+ac_config_files="$ac_config_files Makefile doc/Makefile examples/Makefile examples/fastwc/Makefile examples/manual/Makefile lib/Makefile po/Makefile.in src/Makefile tools/Makefile tests/Makefile"
+
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${want_pthread_TRUE}" && test -z "${want_pthread_FALSE}"; then
+  as_fn_error $? "conditional \"want_pthread\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by the fast lexical analyser generator $as_me 2.6.1, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <flex-help@lists.sourceforge.net>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+the fast lexical analyser generator config.status 2.6.1
+configured by $0, generated by GNU Autoconf 2.69,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`'
+predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`'
+postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`'
+reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`'
+reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
+nm_file_list_spec \
+lt_cv_truncate_bin \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib \
+compiler_lib_search_dirs \
+predep_objects \
+postdep_objects \
+predeps \
+postdeps \
+compiler_lib_search_path \
+LD_CXX \
+reload_flag_CXX \
+compiler_CXX \
+lt_prog_compiler_no_builtin_flag_CXX \
+lt_prog_compiler_pic_CXX \
+lt_prog_compiler_wl_CXX \
+lt_prog_compiler_static_CXX \
+lt_cv_prog_compiler_c_o_CXX \
+export_dynamic_flag_spec_CXX \
+whole_archive_flag_spec_CXX \
+compiler_needs_object_CXX \
+with_gnu_ld_CXX \
+allow_undefined_flag_CXX \
+no_undefined_flag_CXX \
+hardcode_libdir_flag_spec_CXX \
+hardcode_libdir_separator_CXX \
+exclude_expsyms_CXX \
+include_expsyms_CXX \
+file_list_spec_CXX \
+compiler_lib_search_dirs_CXX \
+predep_objects_CXX \
+postdep_objects_CXX \
+predeps_CXX \
+postdeps_CXX \
+compiler_lib_search_path_CXX; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path \
+reload_cmds_CXX \
+old_archive_cmds_CXX \
+old_archive_from_new_cmds_CXX \
+old_archive_from_expsyms_cmds_CXX \
+archive_cmds_CXX \
+archive_expsym_cmds_CXX \
+module_cmds_CXX \
+module_expsym_cmds_CXX \
+export_symbols_cmds_CXX \
+prelink_cmds_CXX \
+postlink_cmds_CXX; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+
+# See if we are running on zsh, and set the options that allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}"; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+    # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+    # from automake < 1.5.
+    eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+    # Capture the value of LINGUAS because we need it to compute CATALOGS.
+    LINGUAS="${LINGUAS-%UNSET%}"
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "src/config.h") CONFIG_HEADERS="$CONFIG_HEADERS src/config.h" ;;
+    "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
+    "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;;
+    "examples/fastwc/Makefile") CONFIG_FILES="$CONFIG_FILES examples/fastwc/Makefile" ;;
+    "examples/manual/Makefile") CONFIG_FILES="$CONFIG_FILES examples/manual/Makefile" ;;
+    "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
+    "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
+    "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+    "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;;
+    "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
+  fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options that allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}"; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile=${ofile}T
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+# Generated automatically by $as_me ($PACKAGE) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the  same
+# distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags='CXX '
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and where our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects
+postdep_objects=$lt_postdep_objects
+predeps=$lt_predeps
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+    cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test set != "${COLLECT_NAMES+set}"; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain=$ac_aux_dir/ltmain.sh
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+
+    cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: CXX
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_CXX
+reload_cmds=$lt_reload_cmds_CXX
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_CXX
+
+# A language specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_CXX
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_CXX
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_CXX
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_CXX
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_CXX
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_CXX
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_CXX
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_CXX
+postdep_objects=$lt_postdep_objects_CXX
+predeps=$lt_predeps_CXX
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# ### END LIBTOOL TAG CONFIG: CXX
+_LT_EOF
+
+ ;;
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named 'Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running 'make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "$am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "po-directories":C)
+    for ac_file in $CONFIG_FILES; do
+      # Support "outfile[:infile[:infile...]]"
+      case "$ac_file" in
+        *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+      esac
+      # PO directories have a Makefile.in generated from Makefile.in.in.
+      case "$ac_file" in */Makefile.in)
+        # Adjust a relative srcdir.
+        ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+        ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+        ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+        # In autoconf-2.13 it is called $ac_given_srcdir.
+        # In autoconf-2.50 it is called $srcdir.
+        test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+        case "$ac_given_srcdir" in
+          .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+          /*) top_srcdir="$ac_given_srcdir" ;;
+          *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+        esac
+        # Treat a directory as a PO directory if and only if it has a
+        # POTFILES.in file. This allows packages to have multiple PO
+        # directories under different names or in different locations.
+        if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+          rm -f "$ac_dir/POTFILES"
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+          gt_tab=`printf '\t'`
+          cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+          POMAKEFILEDEPS="POTFILES.in"
+          # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+          # on $ac_dir but don't depend on user-specified configuration
+          # parameters.
+          if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+            # The LINGUAS file contains the set of available languages.
+            if test -n "$OBSOLETE_ALL_LINGUAS"; then
+              test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+            fi
+            ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+            # Hide the ALL_LINGUAS assignment from automake < 1.5.
+            eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+            POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+          else
+            # The set of available languages was given in configure.in.
+            # Hide the ALL_LINGUAS assignment from automake < 1.5.
+            eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+          fi
+          # Compute POFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+          # Compute UPDATEPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+          # Compute DUMMYPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+          # Compute GMOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+          case "$ac_given_srcdir" in
+            .) srcdirpre= ;;
+            *) srcdirpre='$(srcdir)/' ;;
+          esac
+          POFILES=
+          UPDATEPOFILES=
+          DUMMYPOFILES=
+          GMOFILES=
+          for lang in $ALL_LINGUAS; do
+            POFILES="$POFILES $srcdirpre$lang.po"
+            UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+            DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+            GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+          done
+          # CATALOGS depends on both $ac_dir and the user's LINGUAS
+          # environment variable.
+          INST_LINGUAS=
+          if test -n "$ALL_LINGUAS"; then
+            for presentlang in $ALL_LINGUAS; do
+              useit=no
+              if test "%UNSET%" != "$LINGUAS"; then
+                desiredlanguages="$LINGUAS"
+              else
+                desiredlanguages="$ALL_LINGUAS"
+              fi
+              for desiredlang in $desiredlanguages; do
+                # Use the presentlang catalog if desiredlang is
+                #   a. equal to presentlang, or
+                #   b. a variant of presentlang (because in this case,
+                #      presentlang can be used as a fallback for messages
+                #      which are not translated in the desiredlang catalog).
+                case "$desiredlang" in
+                  "$presentlang"*) useit=yes;;
+                esac
+              done
+              if test $useit = yes; then
+                INST_LINGUAS="$INST_LINGUAS $presentlang"
+              fi
+            done
+          fi
+          CATALOGS=
+          if test -n "$INST_LINGUAS"; then
+            for lang in $INST_LINGUAS; do
+              CATALOGS="$CATALOGS $lang.gmo"
+            done
+          fi
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+          sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+          for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+            if test -f "$f"; then
+              case "$f" in
+                *.orig | *.bak | *~) ;;
+                *) cat "$f" >> "$ac_dir/Makefile" ;;
+              esac
+            fi
+          done
+        fi
+        ;;
+      esac
+    done ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 0000000..b45c3ab
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,148 @@
+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+# This file is part of flex.
+
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+
+# Neither the name of the University nor the names of its contributors
+# may be used to endorse or promote products derived from this software
+# without specific prior written permission.
+
+# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE.
+
+# autoconf requirements and initialization
+
+AC_INIT([the fast lexical analyser generator],[2.6.1],[flex-help@lists.sourceforge.net],[flex])
+AC_CONFIG_SRCDIR([src/scan.l])
+AC_CONFIG_AUX_DIR([build-aux])
+LT_INIT
+AM_INIT_AUTOMAKE([gnu check-news std-options dist-xz parallel-tests 1.14.1])
+AC_CONFIG_HEADER([src/config.h])
+AC_CONFIG_LIBOBJ_DIR([lib])
+AC_CONFIG_MACRO_DIR([m4])
+SHARED_VERSION_INFO="2:0:0"
+AC_SUBST(SHARED_VERSION_INFO)
+
+# checks for programs
+
+AM_GNU_GETTEXT([external])
+AM_GNU_GETTEXT_VERSION([0.19])
+AC_PROG_YACC
+AM_PROG_LEX
+AC_PROG_CC
+AC_PROG_CXX
+AM_PROG_CC_C_O
+AC_PROG_LN_S
+AC_PROG_AWK
+AC_PROG_INSTALL
+
+AC_PATH_PROG([BISON], bison, no)
+AS_IF([test "$BISON" != no],[],
+	[ AC_SUBST([BISON], [\${top_srcdir}/build-aux/missing bison])
+	  AC_MSG_NOTICE(no bison program found: only required for maintainers)
+	])
+
+AC_PATH_PROG([HELP2MAN], help2man, [\${top_srcdir}/build-aux/missing help2man])
+  AS_IF([test -z "$ac_cv_path_HELP2MAN" ],[],
+    AC_MSG_WARN(program not found: help2man: building man page will not work)
+  )
+
+AC_PATH_PROGS([TEXI2DVI], [gtexi2dvi texi2dvi], [\${top_srcdir}/build-aux/missing texi2dvi])
+  AS_IF([test -z "$ac_cv_path_TEXI2DVI" ], [],
+    AC_MSG_WARN(texi2dvi: program not found: building pdf version of manual will not work)
+  )
+
+# Check for a m4 that supports -P
+
+AC_CACHE_CHECK([for m4 that supports -P], [ac_cv_path_M4],
+[AC_PATH_PROGS_FEATURE_CHECK([M4], [gm4 gnum4 m4],
+              [[m4out=`echo 'm''4_divnum' | $ac_path_M4 -P`]
+                [test "x$m4out" = x0 \
+                && ac_cv_path_M4=$ac_path_M4 ac_path_M4_found=:]],
+              [AC_MSG_ERROR([could not find m4 that supports -P])])])
+AC_SUBST([M4], [$ac_cv_path_M4])
+AC_DEFINE_UNQUOTED([M4], ["$M4"], [Define to the m4 executable name.])
+
+AC_PATH_PROG(INDENT, indent, indent)
+# if INDENT is set to 'indent' then we didn't find indent
+if test "$INDENT" != indent ; then
+   AC_MSG_CHECKING(if $INDENT is GNU indent)
+   if $INDENT --version 2>/dev/null | head -n 1|grep "GNU indent" > /dev/null ; then
+      AC_MSG_RESULT(yes)
+   else
+      AC_MSG_RESULT(no)
+      AC_MSG_WARN($INDENT does not appear to be GNU indent.)
+   fi
+else
+   AC_MSG_WARN(no indent program found: make indent target will not function)
+fi
+
+# checks for headers
+
+AC_CHECK_HEADERS([inttypes.h libintl.h limits.h locale.h malloc.h netinet/in.h regex.h unistd.h])
+
+# checks for libraries
+
+# The test test-pthread uses libpthread, so we check for it here, but
+# all we need is the preprocessor symbol defined since we don't need
+# LIBS to include libpthread for building flex.
+
+AC_CHECK_LIB(pthread, pthread_mutex_lock,
+AC_DEFINE([HAVE_LIBPTHREAD], 1, [pthread library] ),
+AC_DEFINE([HAVE_LIBPTHREAD], 0, [pthread library] )
+)
+AC_CHECK_HEADERS([pthread.h])
+AM_CONDITIONAL([want_pthread], [test x$ac_cv_lib_pthread_pthread_mutex_lock = xyes])
+
+AC_CHECK_LIB(m, log10)
+
+# Checks for typedefs, structures, and compiler characteristics.
+
+AC_HEADER_STDBOOL
+AC_C_CONST
+AC_TYPE_SIZE_T
+
+# Checks for library functions.
+
+AC_FUNC_ALLOCA
+AC_FUNC_FORK
+AC_FUNC_MALLOC
+AC_FUNC_REALLOC
+
+AC_CHECK_FUNCS(dup2 dnl
+memset dnl
+pow dnl
+regcomp dnl
+setlocale dnl
+strchr dnl
+strdup dnl
+strtol)
+
+AC_REPLACE_FUNCS(reallocarray)
+
+AC_CONFIG_FILES(
+Makefile
+doc/Makefile
+examples/Makefile
+examples/fastwc/Makefile
+examples/manual/Makefile
+lib/Makefile
+po/Makefile.in
+src/Makefile
+tools/Makefile
+tests/Makefile
+)
+
+AC_OUTPUT
diff --git a/doc/Makefile.am b/doc/Makefile.am
new file mode 100644
index 0000000..e6e97c8
--- /dev/null
+++ b/doc/Makefile.am
@@ -0,0 +1,30 @@
+help2man = @HELP2MAN@
+
+info_TEXINFOS =	flex.texi
+dist_man_MANS = flex.1
+
+CLEANFILES = \
+	flex.aux \
+	flex.cp \
+	flex.cps \
+	flex.fn \
+	flex.fns \
+	flex.hk \
+	flex.hks \
+	flex.ky \
+	flex.log \
+	flex.op \
+	flex.ops \
+	flex.pg \
+	flex.toc \
+	flex.tp \
+	flex.tps \
+	flex.vr \
+	flex.vrs
+
+$(dist_man_MANS): $(top_srcdir)/configure.ac $(top_srcdir)/src/flex.skl $(top_srcdir)/src/options.c $(top_srcdir)/src/options.h
+	for i in $(dist_man_MANS) ; do \
+	$(help2man) --name='$(PACKAGE_NAME)' \
+	--section=`echo $$i | sed -e 's/.*\.\([^.]*\)$$/\1/'` \
+	 $(top_srcdir)/src/flex$(EXEEXT) > $$i || rm -f $$i ; \
+	done
diff --git a/doc/Makefile.in b/doc/Makefile.in
new file mode 100644
index 0000000..7f12752
--- /dev/null
+++ b/doc/Makefile.in
@@ -0,0 +1,887 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = doc
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
+	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/version.texi \
+	$(srcdir)/stamp-vti $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
+am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
+am__v_DVIPS_0 = @echo "  DVIPS   " $@;
+am__v_DVIPS_1 = 
+AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
+am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
+am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
+am__v_MAKEINFO_1 = 
+AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
+am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
+am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
+am__v_INFOHTML_1 = 
+AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
+am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
+am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
+am__v_TEXI2DVI_1 = 
+AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
+am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
+am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
+am__v_TEXI2PDF_1 = 
+AM_V_texinfo = $(am__v_texinfo_@AM_V@)
+am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
+am__v_texinfo_0 = -q
+am__v_texinfo_1 = 
+AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
+am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
+am__v_texidevnull_0 = > /dev/null
+am__v_texidevnull_1 = 
+INFO_DEPS = $(srcdir)/flex.info
+TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
+am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
+DVIS = flex.dvi
+PDFS = flex.pdf
+PSS = flex.ps
+HTMLS = flex.html
+TEXINFOS = flex.texi
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+MAKEINFOHTML = $(MAKEINFO) --html
+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
+DVIPS = dvips
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(dist_man_MANS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/mdate-sh \
+	$(top_srcdir)/build-aux/texinfo.tex
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BISON = @BISON@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HELP2MAN = @HELP2MAN@
+INDENT = @INDENT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+M4 = @M4@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHARED_VERSION_INFO = @SHARED_VERSION_INFO@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TEXI2DVI = @TEXI2DVI@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+help2man = @HELP2MAN@
+info_TEXINFOS = flex.texi
+dist_man_MANS = flex.1
+CLEANFILES = \
+	flex.aux \
+	flex.cp \
+	flex.cps \
+	flex.fn \
+	flex.fns \
+	flex.hk \
+	flex.hks \
+	flex.ky \
+	flex.log \
+	flex.op \
+	flex.ops \
+	flex.pg \
+	flex.toc \
+	flex.tp \
+	flex.tps \
+	flex.vr \
+	flex.vrs
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .dvi .html .info .pdf .ps .texi
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu doc/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+.texi.info:
+	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
+	rm -rf $$backupdir && mkdir $$backupdir && \
+	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+	  done; \
+	else :; fi && \
+	cd "$$am__cwd"; \
+	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	 -o $@ $<; \
+	then \
+	  rc=0; \
+	  $(am__cd) $(srcdir); \
+	else \
+	  rc=$$?; \
+	  $(am__cd) $(srcdir) && \
+	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
+	fi; \
+	rm -rf $$backupdir; exit $$rc
+
+.texi.dvi:
+	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
+	$<
+
+.texi.pdf:
+	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
+	$<
+
+.texi.html:
+	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
+	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	 -o $(@:.html=.htp) $<; \
+	then \
+	  rm -rf $@ && mv $(@:.html=.htp) $@; \
+	else \
+	  rm -rf $(@:.html=.htp); exit 1; \
+	fi
+$(srcdir)/flex.info: flex.texi $(srcdir)/version.texi
+flex.dvi: flex.texi $(srcdir)/version.texi
+flex.pdf: flex.texi $(srcdir)/version.texi
+flex.html: flex.texi $(srcdir)/version.texi
+$(srcdir)/version.texi:  $(srcdir)/stamp-vti
+$(srcdir)/stamp-vti: flex.texi $(top_srcdir)/configure
+	@(dir=.; test -f ./flex.texi || dir=$(srcdir); \
+	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/flex.texi`; \
+	echo "@set UPDATED $$1 $$2 $$3"; \
+	echo "@set UPDATED-MONTH $$2 $$3"; \
+	echo "@set EDITION $(VERSION)"; \
+	echo "@set VERSION $(VERSION)") > vti.tmp$$$$ && \
+	(cmp -s vti.tmp$$$$ $(srcdir)/version.texi \
+	  || (echo "Updating $(srcdir)/version.texi" && \
+	      cp vti.tmp$$$$ $(srcdir)/version.texi.tmp$$$$ && \
+	      mv $(srcdir)/version.texi.tmp$$$$ $(srcdir)/version.texi)) && \
+	rm -f vti.tmp$$$$ $(srcdir)/version.texi.$$$$
+	@cp $(srcdir)/version.texi $@
+
+mostlyclean-vti:
+	-rm -f vti.tmp* $(srcdir)/version.texi.tmp*
+
+maintainer-clean-vti:
+	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
+.dvi.ps:
+	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	$(DVIPS) $(AM_V_texinfo) -o $@ $<
+
+uninstall-dvi-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
+	done
+
+uninstall-html-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
+	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
+	done
+
+uninstall-info-am:
+	@$(PRE_UNINSTALL)
+	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
+	  list='$(INFO_DEPS)'; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
+	  done; \
+	else :; fi
+	@$(NORMAL_UNINSTALL)
+	@list='$(INFO_DEPS)'; \
+	for file in $$list; do \
+	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
+	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+	   else :; fi); \
+	done
+
+uninstall-pdf-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
+	done
+
+uninstall-ps-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
+	done
+
+dist-info: $(INFO_DEPS)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; \
+	for base in $$list; do \
+	  case $$base in \
+	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
+	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
+	    if test -f $$file; then \
+	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+	      test -f "$(distdir)/$$relfile" || \
+		cp -p $$file "$(distdir)/$$relfile"; \
+	    else :; fi; \
+	  done; \
+	done
+
+mostlyclean-aminfo:
+	-rm -rf flex.t2d flex.t2p
+
+clean-aminfo:
+	-test -z "flex.dvi flex.pdf flex.ps flex.html" \
+	|| rm -rf flex.dvi flex.pdf flex.ps flex.html
+
+maintainer-clean-aminfo:
+	@list='$(INFO_DEPS)'; for i in $$list; do \
+	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
+	done
+install-man1: $(dist_man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(dist_man_MANS)'; \
+	test -n "$(man1dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.1[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man1:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.1[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-info
+check-am: all-am
+check: check-am
+all-am: Makefile $(INFO_DEPS) $(MANS)
+installdirs:
+	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am: $(DVIS)
+
+html: html-am
+
+html-am: $(HTMLS)
+
+info: info-am
+
+info-am: $(INFO_DEPS)
+
+install-data-am: install-info-am install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am: $(DVIS)
+	@$(NORMAL_INSTALL)
+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
+	done
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__strip_dir) \
+	  d2=$$d$$p; \
+	  if test -d "$$d2"; then \
+	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	  else \
+	    list2="$$list2 $$d2"; \
+	  fi; \
+	done; \
+	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+	done; }
+install-info: install-info-am
+
+install-info-am: $(INFO_DEPS)
+	@$(NORMAL_INSTALL)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
+	fi; \
+	for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+	    if test -f $$ifile; then \
+	      echo "$$ifile"; \
+	    else : ; fi; \
+	  done; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
+	@$(POST_INSTALL)
+	@if $(am__can_run_installinfo); then \
+	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
+	  done; \
+	else : ; fi
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+	@$(NORMAL_INSTALL)
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
+install-ps: install-ps-am
+
+install-ps-am: $(PSS)
+	@$(NORMAL_INSTALL)
+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+	maintainer-clean-generic maintainer-clean-vti
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-vti
+
+pdf: pdf-am
+
+pdf-am: $(PDFS)
+
+ps: ps-am
+
+ps-am: $(PSS)
+
+uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
+	uninstall-man uninstall-pdf-am uninstall-ps-am
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
+	clean-libtool cscopelist-am ctags-am dist-info distclean \
+	distclean-generic distclean-libtool distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-man1 install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-aminfo maintainer-clean-generic \
+	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \
+	pdf-am ps ps-am tags-am uninstall uninstall-am \
+	uninstall-dvi-am uninstall-html-am uninstall-info-am \
+	uninstall-man uninstall-man1 uninstall-pdf-am uninstall-ps-am
+
+.PRECIOUS: Makefile
+
+
+$(dist_man_MANS): $(top_srcdir)/configure.ac $(top_srcdir)/src/flex.skl $(top_srcdir)/src/options.c $(top_srcdir)/src/options.h
+	for i in $(dist_man_MANS) ; do \
+	$(help2man) --name='$(PACKAGE_NAME)' \
+	--section=`echo $$i | sed -e 's/.*\.\([^.]*\)$$/\1/'` \
+	 $(top_srcdir)/src/flex$(EXEEXT) > $$i || rm -f $$i ; \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/doc/flex.1 b/doc/flex.1
new file mode 100644
index 0000000..6b301e7
--- /dev/null
+++ b/doc/flex.1
@@ -0,0 +1,168 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.1.
+.TH FLEX "1" "March 2016" "flex 2.6.1" "User Commands"
+.SH NAME
+flex \- the fast lexical analyser generator
+.SH SYNOPSIS
+.B flex
+[\fI\,OPTIONS\/\fR] [\fI\,FILE\/\fR]...
+.SH DESCRIPTION
+Generates programs that perform pattern\-matching on text.
+.SS "Table Compression:"
+.TP
+\fB\-Ca\fR, \fB\-\-align\fR
+trade off larger tables for better memory alignment
+.TP
+\fB\-Ce\fR, \fB\-\-ecs\fR
+construct equivalence classes
+.TP
+\fB\-Cf\fR
+do not compress tables; use \fB\-f\fR representation
+.TP
+\fB\-CF\fR
+do not compress tables; use \fB\-F\fR representation
+.TP
+\fB\-Cm\fR, \fB\-\-meta\-ecs\fR
+construct meta\-equivalence classes
+.TP
+\fB\-Cr\fR, \fB\-\-read\fR
+use read() instead of stdio for scanner input
+.TP
+\fB\-f\fR, \fB\-\-full\fR
+generate fast, large scanner. Same as \fB\-Cfr\fR
+.TP
+\fB\-F\fR, \fB\-\-fast\fR
+use alternate table representation. Same as \fB\-CFr\fR
+.TP
+\fB\-Cem\fR
+default compression (same as \fB\-\-ecs\fR \fB\-\-meta\-ecs\fR)
+.SS "Debugging:"
+.TP
+\fB\-d\fR, \fB\-\-debug\fR
+enable debug mode in scanner
+.TP
+\fB\-b\fR, \fB\-\-backup\fR
+write backing\-up information to lex.backup
+.TP
+\fB\-p\fR, \fB\-\-perf\-report\fR
+write performance report to stderr
+.TP
+\fB\-s\fR, \fB\-\-nodefault\fR
+suppress default rule to ECHO unmatched text
+.TP
+\fB\-T\fR, \fB\-\-trace\fR
+flex should run in trace mode
+.TP
+\fB\-w\fR, \fB\-\-nowarn\fR
+do not generate warnings
+.TP
+\fB\-v\fR, \fB\-\-verbose\fR
+write summary of scanner statistics to stdout
+.TP
+\fB\-\-hex\fR
+use hexadecimal numbers instead of octal in debug outputs
+.SH FILES
+.TP
+\fB\-o\fR, \fB\-\-outfile\fR=\fI\,FILE\/\fR
+specify output filename
+.TP
+\fB\-S\fR, \fB\-\-skel\fR=\fI\,FILE\/\fR
+specify skeleton file
+.TP
+\fB\-t\fR, \fB\-\-stdout\fR
+write scanner on stdout instead of lex.yy.c
+.TP
+\fB\-\-yyclass\fR=\fI\,NAME\/\fR
+name of C++ class
+.TP
+\fB\-\-header\-file\fR=\fI\,FILE\/\fR
+create a C header file in addition to the scanner
+.HP
+\fB\-\-tables\-file\fR[=\fI\,FILE\/\fR] write tables to FILE
+.SS "Scanner behavior:"
+.TP
+\fB\-7\fR, \fB\-\-7bit\fR
+generate 7\-bit scanner
+.TP
+\fB\-8\fR, \fB\-\-8bit\fR
+generate 8\-bit scanner
+.TP
+\fB\-B\fR, \fB\-\-batch\fR
+generate batch scanner (opposite of \fB\-I\fR)
+.TP
+\fB\-i\fR, \fB\-\-case\-insensitive\fR
+ignore case in patterns
+.TP
+\fB\-l\fR, \fB\-\-lex\-compat\fR
+maximal compatibility with original lex
+.TP
+\fB\-X\fR, \fB\-\-posix\-compat\fR
+maximal compatibility with POSIX lex
+.TP
+\fB\-I\fR, \fB\-\-interactive\fR
+generate interactive scanner (opposite of \fB\-B\fR)
+.TP
+\fB\-\-yylineno\fR
+track line count in yylineno
+.SS "Generated code:"
+.TP
+\-+,  \fB\-\-c\fR++
+generate C++ scanner class
+.TP
+\fB\-Dmacro\fR[=\fI\,defn\/\fR]
+#define macro defn  (default defn is '1')
+.TP
+\fB\-L\fR,  \fB\-\-noline\fR
+suppress #line directives in scanner
+.TP
+\fB\-P\fR,  \fB\-\-prefix\fR=\fI\,STRING\/\fR
+use STRING as prefix instead of "yy"
+.TP
+\fB\-R\fR,  \fB\-\-reentrant\fR
+generate a reentrant C scanner
+.TP
+\fB\-\-bison\-bridge\fR
+scanner for bison pure parser.
+.TP
+\fB\-\-bison\-locations\fR
+include yylloc support.
+.TP
+\fB\-\-stdinit\fR
+initialize yyin/yyout to stdin/stdout
+.HP
+\fB\-\-noansi\-definitions\fR old\-style function definitions
+.TP
+\fB\-\-noansi\-prototypes\fR
+empty parameter list in prototypes
+.TP
+\fB\-\-nounistd\fR
+do not include <unistd.h>
+.TP
+\fB\-\-noFUNCTION\fR
+do not generate a particular FUNCTION
+.SS "Miscellaneous:"
+.TP
+\fB\-c\fR
+do\-nothing POSIX option
+.TP
+\fB\-n\fR
+do\-nothing POSIX option
+.HP
+\-?
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+produce this help message
+.TP
+\fB\-V\fR, \fB\-\-version\fR
+report flex version
+.SH "SEE ALSO"
+The full documentation for
+.B flex
+is maintained as a Texinfo manual.  If the
+.B info
+and
+.B flex
+programs are properly installed at your site, the command
+.IP
+.B info flex
+.PP
+should give you access to the complete manual.
diff --git a/doc/flex.info b/doc/flex.info
new file mode 100644
index 0000000..a2a5dd9
--- /dev/null
+++ b/doc/flex.info
@@ -0,0 +1,281 @@
+This is flex.info, produced by makeinfo version 6.0 from flex.texi.
+
+The flex manual is placed under the same licensing conditions as the
+rest of flex:
+
+   Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2012 The Flex
+Project.
+
+   Copyright (C) 1990, 1997 The Regents of the University of California.
+All rights reserved.
+
+   This code is derived from software contributed to Berkeley by Vern
+Paxson.
+
+   The United States Government has rights in this work pursuant to
+contract no.  DE-AC03-76SF00098 between the United States Department of
+Energy and the University of California.
+
+   Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+  1. Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+  2. Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the
+     distribution.
+
+   Neither the name of the University nor the names of its contributors
+may be used to endorse or promote products derived from this software
+without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+INFO-DIR-SECTION Programming
+START-INFO-DIR-ENTRY
+* flex: (flex).      Fast lexical analyzer generator (lex replacement).
+END-INFO-DIR-ENTRY
+
+
+Indirect:
+flex.info-1: 1622
+flex.info-2: 319115
+
+Tag Table:
+(Indirect)
+Node: Top1622
+Node: Copyright9420
+Node: Reporting Bugs10939
+Node: Introduction11195
+Node: Simple Examples12024
+Node: Format15312
+Node: Definitions Section15767
+Ref: Definitions Section-Footnote-118025
+Node: Rules Section18093
+Node: User Code Section19251
+Node: Comments in the Input19689
+Node: Patterns21059
+Ref: case and character ranges27891
+Node: Matching31894
+Node: Actions35179
+Node: Generated Scanner44141
+Node: Start Conditions49160
+Node: Multiple Input Buffers59702
+Ref: Scanning Strings66243
+Node: EOF67872
+Node: Misc Macros69458
+Node: User Values72312
+Node: Yacc74637
+Node: Scanner Options75532
+Node: Options for Specifying Filenames78321
+Ref: option-header78547
+Ref: option-outfile79261
+Ref: option-stdout79586
+Node: Options Affecting Scanner Behavior80569
+Ref: option-case-insensitive80810
+Ref: option-lex-compat81243
+Ref: option-batch81775
+Ref: option-interactive82294
+Ref: option-7bit83648
+Ref: option-8bit84952
+Ref: option-default85364
+Ref: option-always-interactive85428
+Ref: option-posix86032
+Ref: option-stack87179
+Ref: option-stdinit87287
+Ref: option-yylineno87766
+Ref: option-yywrap88209
+Node: Code-Level And API Options88476
+Ref: option-ansi-definitions88703
+Ref: option-ansi-prototypes88951
+Ref: option-bison-bridge89199
+Ref: option-bison-locations89540
+Ref: option-noline89800
+Ref: option-reentrant90314
+Ref: option-c++90926
+Ref: option-array91052
+Ref: option-pointer91150
+Ref: option-prefix91277
+Ref: option-main92805
+Ref: option-nounistd92989
+Ref: option-yyclass93500
+Node: Options for Scanner Speed and Size93984
+Ref: option-align94534
+Ref: option-ecs95036
+Ref: option-meta-ecs96075
+Ref: option-read96563
+Ref: option-full98446
+Ref: option-fast98641
+Node: Debugging Options99565
+Ref: option-backup99752
+Ref: option-debug100297
+Ref: option-perf-report101019
+Ref: option-nodefault101645
+Ref: option-trace101963
+Ref: option-nowarn102254
+Ref: option-verbose102322
+Ref: option-warn102751
+Node: Miscellaneous Options102970
+Node: Performance103426
+Node: Cxx113673
+Node: Reentrant121765
+Node: Reentrant Uses122499
+Node: Reentrant Overview124061
+Node: Reentrant Example124861
+Node: Reentrant Detail125634
+Node: Specify Reentrant126138
+Node: Extra Reentrant Argument126788
+Node: Global Replacement128040
+Node: Init and Destroy Functions129275
+Node: Accessor Methods131796
+Node: Extra Data133143
+Node: About yyscan_t135410
+Node: Reentrant Functions135807
+Ref: bison-functions137291
+Node: Lex and Posix138030
+Node: Memory Management145377
+Ref: memory-management145523
+Node: The Default Memory Management145757
+Ref: The Default Memory Management-Footnote-1149577
+Node: Overriding The Default Memory Management149730
+Ref: Overriding The Default Memory Management-Footnote-1152144
+Node: A Note About yytext And Memory152308
+Node: Serialized Tables153548
+Ref: serialization153692
+Node: Creating Serialized Tables154472
+Node: Loading and Unloading Serialized Tables156087
+Node: Tables File Format157860
+Node: Diagnostics164885
+Node: Limitations168294
+Node: Bibliography170242
+Node: FAQ170912
+Node: When was flex born?176075
+Node: How do I expand backslash-escape sequences in C-style quoted strings?176452
+Node: Why do flex scanners call fileno if it is not ANSI compatible?177755
+Node: Does flex support recursive pattern definitions?178552
+Node: How do I skip huge chunks of input (tens of megabytes) while using flex?179399
+Node: Flex is not matching my patterns in the same order that I defined them.179866
+Node: My actions are executing out of order or sometimes not at all.181612
+Node: How can I have multiple input sources feed into the same scanner at the same time?182385
+Node: Can I build nested parsers that work with the same input file?184370
+Node: How can I match text only at the end of a file?185377
+Node: How can I make REJECT cascade across start condition boundaries?186181
+Node: Why cant I use fast or full tables with interactive mode?187195
+Node: How much faster is -F or -f than -C?188452
+Node: If I have a simple grammar cant I just parse it with flex?188764
+Node: Why doesn't yyrestart() set the start state back to INITIAL?189246
+Node: How can I match C-style comments?189873
+Node: The period isn't working the way I expected.190683
+Node: Can I get the flex manual in another format?191928
+Node: Does there exist a "faster" NDFA->DFA algorithm?192418
+Node: How does flex compile the DFA so quickly?192928
+Node: How can I use more than 8192 rules?193894
+Node: How do I abandon a file in the middle of a scan and switch to a new file?195304
+Node: How do I execute code only during initialization (only before the first scan)?195858
+Node: How do I execute code at termination?196635
+Node: Where else can I find help?196961
+Node: Can I include comments in the "rules" section of the file?197335
+Node: I get an error about undefined yywrap().197715
+Node: How can I change the matching pattern at run time?198191
+Node: How can I expand macros in the input?198553
+Node: How can I build a two-pass scanner?199585
+Node: How do I match any string not matched in the preceding rules?200503
+Node: I am trying to port code from AT&T lex that uses yysptr and yysbuf.201412
+Node: Is there a way to make flex treat NULL like a regular character?202207
+Node: Whenever flex can not match the input it says "flex scanner jammed".202727
+Node: Why doesn't flex have non-greedy operators like perl does?203370
+Node: Memory leak - 16386 bytes allocated by malloc.204723
+Ref: faq-memory-leak205021
+Node: How do I track the byte offset for lseek()?205992
+Node: How do I use my own I/O classes in a C++ scanner?207501
+Node: How do I skip as many chars as possible?208344
+Node: deleteme00209419
+Node: Are certain equivalent patterns faster than others?209859
+Node: Is backing up a big deal?213277
+Node: Can I fake multi-byte character support?215183
+Node: deleteme01216624
+Node: Can you discuss some flex internals?217733
+Node: unput() messes up yy_at_bol219977
+Node: The | operator is not doing what I want221079
+Node: Why can't flex understand this variable trailing context pattern?222625
+Node: The ^ operator isn't working223874
+Node: Trailing context is getting confused with trailing optional patterns225109
+Node: Is flex GNU or not?226352
+Node: ERASEME53228025
+Node: I need to scan if-then-else blocks and while loops228795
+Node: ERASEME55229994
+Node: ERASEME56231092
+Node: ERASEME57232450
+Node: Is there a repository for flex scanners?233448
+Node: How can I conditionally compile or preprocess my flex input file?233764
+Node: Where can I find grammars for lex and yacc?234237
+Node: I get an end-of-buffer message for each character scanned.234584
+Node: unnamed-faq-62235179
+Node: unnamed-faq-63236197
+Node: unnamed-faq-64237494
+Node: unnamed-faq-65238460
+Node: unnamed-faq-66239246
+Node: unnamed-faq-67240361
+Node: unnamed-faq-68241348
+Node: unnamed-faq-69242490
+Node: unnamed-faq-70243203
+Node: unnamed-faq-71243964
+Node: unnamed-faq-72245173
+Node: unnamed-faq-73246216
+Node: unnamed-faq-74247140
+Node: unnamed-faq-75248085
+Node: unnamed-faq-76249217
+Node: unnamed-faq-77249923
+Node: unnamed-faq-78250816
+Node: unnamed-faq-79251814
+Node: unnamed-faq-80253514
+Node: unnamed-faq-81254832
+Node: unnamed-faq-82257632
+Node: unnamed-faq-83258589
+Node: unnamed-faq-84260369
+Node: unnamed-faq-85261472
+Node: unnamed-faq-86262479
+Node: unnamed-faq-87263417
+Node: unnamed-faq-88264063
+Node: unnamed-faq-90264894
+Node: unnamed-faq-91266157
+Node: unnamed-faq-92268585
+Node: unnamed-faq-93269084
+Node: unnamed-faq-94270011
+Node: unnamed-faq-95271423
+Node: unnamed-faq-96272941
+Node: unnamed-faq-97273700
+Node: unnamed-faq-98274367
+Node: unnamed-faq-99275032
+Node: unnamed-faq-100275961
+Node: unnamed-faq-101276671
+Node: What is the difference between YYLEX_PARAM and YY_DECL?277484
+Node: Why do I get "conflicting types for yylex" error?278008
+Node: How do I access the values set in a Flex action from within a Bison action?278538
+Node: Appendices278967
+Node: Makefiles and Flex279232
+Ref: Makefiles and Flex-Footnote-1282434
+Ref: Makefiles and Flex-Footnote-2282551
+Ref: Makefiles and Flex-Footnote-3282738
+Node: Bison Bridge282789
+Ref: Bison Bridge-Footnote-1285456
+Node: M4 Dependency285648
+Ref: M4 Dependency-Footnote-1287062
+Node: Common Patterns287198
+Node: Numbers287521
+Node: Identifiers288497
+Node: Quoted Constructs289324
+Node: Addresses290378
+Node: Indices291690
+Node: Concept Index291982
+Node: Index of Functions and Macros319115
+Node: Index of Variables324084
+Node: Index of Data Types325750
+Node: Index of Hooks326638
+Node: Index of Scanner Options327206
+
+End Tag Table
diff --git a/doc/flex.info-1 b/doc/flex.info-1
new file mode 100644
index 0000000..4a69351
--- /dev/null
+++ b/doc/flex.info-1
@@ -0,0 +1,7795 @@
+This is flex.info, produced by makeinfo version 6.0 from flex.texi.
+
+The flex manual is placed under the same licensing conditions as the
+rest of flex:
+
+   Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2012 The Flex
+Project.
+
+   Copyright (C) 1990, 1997 The Regents of the University of California.
+All rights reserved.
+
+   This code is derived from software contributed to Berkeley by Vern
+Paxson.
+
+   The United States Government has rights in this work pursuant to
+contract no.  DE-AC03-76SF00098 between the United States Department of
+Energy and the University of California.
+
+   Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+  1. Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+  2. Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the
+     distribution.
+
+   Neither the name of the University nor the names of its contributors
+may be used to endorse or promote products derived from this software
+without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+INFO-DIR-SECTION Programming
+START-INFO-DIR-ENTRY
+* flex: (flex).      Fast lexical analyzer generator (lex replacement).
+END-INFO-DIR-ENTRY
+
+
+File: flex.info,  Node: Top,  Next: Copyright,  Prev: (dir),  Up: (dir)
+
+flex
+****
+
+This manual describes 'flex', a tool for generating programs that
+perform pattern-matching on text.  The manual includes both tutorial and
+reference sections.
+
+   This edition of 'The flex Manual' documents 'flex' version 2.6.1.  It
+was last updated on 29 February 2016.
+
+   This manual was written by Vern Paxson, Will Estes and John Millaway.
+
+* Menu:
+
+* Copyright::                   
+* Reporting Bugs::              
+* Introduction::                
+* Simple Examples::             
+* Format::                      
+* Patterns::                    
+* Matching::                    
+* Actions::                     
+* Generated Scanner::           
+* Start Conditions::            
+* Multiple Input Buffers::      
+* EOF::                         
+* Misc Macros::                 
+* User Values::                 
+* Yacc::                        
+* Scanner Options::             
+* Performance::                 
+* Cxx::                         
+* Reentrant::                   
+* Lex and Posix::               
+* Memory Management::           
+* Serialized Tables::           
+* Diagnostics::                 
+* Limitations::                 
+* Bibliography::                
+* FAQ::                         
+* Appendices::                  
+* Indices::                     
+
+ -- The Detailed Node Listing --
+
+Format of the Input File
+
+* Definitions Section::         
+* Rules Section::               
+* User Code Section::           
+* Comments in the Input::       
+
+Scanner Options
+
+* Options for Specifying Filenames::  
+* Options Affecting Scanner Behavior::  
+* Code-Level And API Options::  
+* Options for Scanner Speed and Size::  
+* Debugging Options::           
+* Miscellaneous Options::       
+
+Reentrant C Scanners
+
+* Reentrant Uses::              
+* Reentrant Overview::          
+* Reentrant Example::           
+* Reentrant Detail::            
+* Reentrant Functions::         
+
+The Reentrant API in Detail
+
+* Specify Reentrant::           
+* Extra Reentrant Argument::    
+* Global Replacement::          
+* Init and Destroy Functions::  
+* Accessor Methods::            
+* Extra Data::                  
+* About yyscan_t::              
+
+Memory Management
+
+* The Default Memory Management::  
+* Overriding The Default Memory Management::  
+* A Note About yytext And Memory::  
+
+Serialized Tables
+
+* Creating Serialized Tables::  
+* Loading and Unloading Serialized Tables::  
+* Tables File Format::          
+
+FAQ
+
+* When was flex born?::         
+* How do I expand backslash-escape sequences in C-style quoted strings?::  
+* Why do flex scanners call fileno if it is not ANSI compatible?::  
+* Does flex support recursive pattern definitions?::  
+* How do I skip huge chunks of input (tens of megabytes) while using flex?::  
+* Flex is not matching my patterns in the same order that I defined them.::  
+* My actions are executing out of order or sometimes not at all.::  
+* How can I have multiple input sources feed into the same scanner at the same time?::  
+* Can I build nested parsers that work with the same input file?::  
+* How can I match text only at the end of a file?::  
+* How can I make REJECT cascade across start condition boundaries?::  
+* Why cant I use fast or full tables with interactive mode?::  
+* How much faster is -F or -f than -C?::  
+* If I have a simple grammar cant I just parse it with flex?::  
+* Why doesn't yyrestart() set the start state back to INITIAL?::  
+* How can I match C-style comments?::  
+* The period isn't working the way I expected.::  
+* Can I get the flex manual in another format?::  
+* Does there exist a "faster" NDFA->DFA algorithm?::  
+* How does flex compile the DFA so quickly?::  
+* How can I use more than 8192 rules?::  
+* How do I abandon a file in the middle of a scan and switch to a new file?::  
+* How do I execute code only during initialization (only before the first scan)?::  
+* How do I execute code at termination?::  
+* Where else can I find help?::  
+* Can I include comments in the "rules" section of the file?::  
+* I get an error about undefined yywrap().::  
+* How can I change the matching pattern at run time?::  
+* How can I expand macros in the input?::  
+* How can I build a two-pass scanner?::  
+* How do I match any string not matched in the preceding rules?::  
+* I am trying to port code from AT&T lex that uses yysptr and yysbuf.::  
+* Is there a way to make flex treat NULL like a regular character?::  
+* Whenever flex can not match the input it says "flex scanner jammed".::  
+* Why doesn't flex have non-greedy operators like perl does?::  
+* Memory leak - 16386 bytes allocated by malloc.::  
+* How do I track the byte offset for lseek()?::  
+* How do I use my own I/O classes in a C++ scanner?::  
+* How do I skip as many chars as possible?::  
+* deleteme00::              
+* Are certain equivalent patterns faster than others?::              
+* Is backing up a big deal?::              
+* Can I fake multi-byte character support?::              
+* deleteme01::              
+* Can you discuss some flex internals?::              
+* unput() messes up yy_at_bol::              
+* The | operator is not doing what I want::              
+* Why can't flex understand this variable trailing context pattern?::              
+* The ^ operator isn't working::              
+* Trailing context is getting confused with trailing optional patterns::              
+* Is flex GNU or not?::              
+* ERASEME53::              
+* I need to scan if-then-else blocks and while loops::              
+* ERASEME55::              
+* ERASEME56::              
+* ERASEME57::              
+* Is there a repository for flex scanners?::              
+* How can I conditionally compile or preprocess my flex input file?::              
+* Where can I find grammars for lex and yacc?::              
+* I get an end-of-buffer message for each character scanned.::              
+* unnamed-faq-62::              
+* unnamed-faq-63::              
+* unnamed-faq-64::              
+* unnamed-faq-65::              
+* unnamed-faq-66::              
+* unnamed-faq-67::              
+* unnamed-faq-68::              
+* unnamed-faq-69::              
+* unnamed-faq-70::              
+* unnamed-faq-71::              
+* unnamed-faq-72::              
+* unnamed-faq-73::              
+* unnamed-faq-74::              
+* unnamed-faq-75::              
+* unnamed-faq-76::              
+* unnamed-faq-77::              
+* unnamed-faq-78::              
+* unnamed-faq-79::              
+* unnamed-faq-80::              
+* unnamed-faq-81::              
+* unnamed-faq-82::              
+* unnamed-faq-83::              
+* unnamed-faq-84::              
+* unnamed-faq-85::              
+* unnamed-faq-86::              
+* unnamed-faq-87::              
+* unnamed-faq-88::              
+* unnamed-faq-90::              
+* unnamed-faq-91::              
+* unnamed-faq-92::              
+* unnamed-faq-93::              
+* unnamed-faq-94::              
+* unnamed-faq-95::              
+* unnamed-faq-96::              
+* unnamed-faq-97::              
+* unnamed-faq-98::              
+* unnamed-faq-99::              
+* unnamed-faq-100::             
+* unnamed-faq-101::             
+* What is the difference between YYLEX_PARAM and YY_DECL?::
+* Why do I get "conflicting types for yylex" error?::
+* How do I access the values set in a Flex action from within a Bison action?::
+
+Appendices
+
+* Makefiles and Flex::          
+* Bison Bridge::                
+* M4 Dependency::               
+* Common Patterns::               
+
+Indices
+
+* Concept Index::               
+* Index of Functions and Macros::  
+* Index of Variables::          
+* Index of Data Types::         
+* Index of Hooks::              
+* Index of Scanner Options::    
+
+
+
+File: flex.info,  Node: Copyright,  Next: Reporting Bugs,  Prev: Top,  Up: Top
+
+1 Copyright
+***********
+
+The flex manual is placed under the same licensing conditions as the
+rest of flex:
+
+   Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2012 The Flex
+Project.
+
+   Copyright (C) 1990, 1997 The Regents of the University of California.
+All rights reserved.
+
+   This code is derived from software contributed to Berkeley by Vern
+Paxson.
+
+   The United States Government has rights in this work pursuant to
+contract no.  DE-AC03-76SF00098 between the United States Department of
+Energy and the University of California.
+
+   Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+  1. Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+  2. Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the
+     distribution.
+
+   Neither the name of the University nor the names of its contributors
+may be used to endorse or promote products derived from this software
+without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+
+File: flex.info,  Node: Reporting Bugs,  Next: Introduction,  Prev: Copyright,  Up: Top
+
+2 Reporting Bugs
+****************
+
+If you find a bug in 'flex', please report it using GitHub's issue
+tracking facility at <https://github.com/westes/flex/issues/>
+
+
+File: flex.info,  Node: Introduction,  Next: Simple Examples,  Prev: Reporting Bugs,  Up: Top
+
+3 Introduction
+**************
+
+'flex' is a tool for generating "scanners".  A scanner is a program
+which recognizes lexical patterns in text.  The 'flex' program reads the
+given input files, or its standard input if no file names are given, for
+a description of a scanner to generate.  The description is in the form
+of pairs of regular expressions and C code, called "rules".  'flex'
+generates as output a C source file, 'lex.yy.c' by default, which
+defines a routine 'yylex()'.  This file can be compiled and linked with
+the flex runtime library to produce an executable.  When the executable
+is run, it analyzes its input for occurrences of the regular
+expressions.  Whenever it finds one, it executes the corresponding C
+code.
+
+
+File: flex.info,  Node: Simple Examples,  Next: Format,  Prev: Introduction,  Up: Top
+
+4 Some Simple Examples
+**********************
+
+First some simple examples to get the flavor of how one uses 'flex'.
+
+   The following 'flex' input specifies a scanner which, when it
+encounters the string 'username' will replace it with the user's login
+name:
+
+         %%
+         username    printf( "%s", getlogin() );
+
+   By default, any text not matched by a 'flex' scanner is copied to the
+output, so the net effect of this scanner is to copy its input file to
+its output with each occurrence of 'username' expanded.  In this input,
+there is just one rule.  'username' is the "pattern" and the 'printf' is
+the "action".  The '%%' symbol marks the beginning of the rules.
+
+   Here's another simple example:
+
+                 int num_lines = 0, num_chars = 0;
+
+         %%
+         \n      ++num_lines; ++num_chars;
+         .       ++num_chars;
+
+         %%
+
+         int main()
+                 {
+                 yylex();
+                 printf( "# of lines = %d, # of chars = %d\n",
+                         num_lines, num_chars );
+                 }
+
+   This scanner counts the number of characters and the number of lines
+in its input.  It produces no output other than the final report on the
+character and line counts.  The first line declares two globals,
+'num_lines' and 'num_chars', which are accessible both inside 'yylex()'
+and in the 'main()' routine declared after the second '%%'.  There are
+two rules, one which matches a newline ('\n') and increments both the
+line count and the character count, and one which matches any character
+other than a newline (indicated by the '.' regular expression).
+
+   A somewhat more complicated example:
+
+         /* scanner for a toy Pascal-like language */
+
+         %{
+         /* need this for the call to atof() below */
+         #include <math.h>
+         %}
+
+         DIGIT    [0-9]
+         ID       [a-z][a-z0-9]*
+
+         %%
+
+         {DIGIT}+    {
+                     printf( "An integer: %s (%d)\n", yytext,
+                             atoi( yytext ) );
+                     }
+
+         {DIGIT}+"."{DIGIT}*        {
+                     printf( "A float: %s (%g)\n", yytext,
+                             atof( yytext ) );
+                     }
+
+         if|then|begin|end|procedure|function        {
+                     printf( "A keyword: %s\n", yytext );
+                     }
+
+         {ID}        printf( "An identifier: %s\n", yytext );
+
+         "+"|"-"|"*"|"/"   printf( "An operator: %s\n", yytext );
+
+         "{"[\^{}}\n]*"}"     /* eat up one-line comments */
+
+         [ \t\n]+          /* eat up whitespace */
+
+         .           printf( "Unrecognized character: %s\n", yytext );
+
+         %%
+
+         int main( int argc, char **argv )
+             {
+             ++argv, --argc;  /* skip over program name */
+             if ( argc > 0 )
+                     yyin = fopen( argv[0], "r" );
+             else
+                     yyin = stdin;
+
+             yylex();
+             }
+
+   This is the beginnings of a simple scanner for a language like
+Pascal.  It identifies different types of "tokens" and reports on what
+it has seen.
+
+   The details of this example will be explained in the following
+sections.
+
+
+File: flex.info,  Node: Format,  Next: Patterns,  Prev: Simple Examples,  Up: Top
+
+5 Format of the Input File
+**************************
+
+The 'flex' input file consists of three sections, separated by a line
+containing only '%%'.
+
+         definitions
+         %%
+         rules
+         %%
+         user code
+
+* Menu:
+
+* Definitions Section::         
+* Rules Section::               
+* User Code Section::           
+* Comments in the Input::       
+
+
+File: flex.info,  Node: Definitions Section,  Next: Rules Section,  Prev: Format,  Up: Format
+
+5.1 Format of the Definitions Section
+=====================================
+
+The "definitions section" contains declarations of simple "name"
+definitions to simplify the scanner specification, and declarations of
+"start conditions", which are explained in a later section.
+
+   Name definitions have the form:
+
+         name definition
+
+   The 'name' is a word beginning with a letter or an underscore ('_')
+followed by zero or more letters, digits, '_', or '-' (dash).  The
+definition is taken to begin at the first non-whitespace character
+following the name and continuing to the end of the line.  The
+definition can subsequently be referred to using '{name}', which will
+expand to '(definition)'.  For example,
+
+         DIGIT    [0-9]
+         ID       [a-z][a-z0-9]*
+
+   Defines 'DIGIT' to be a regular expression which matches a single
+digit, and 'ID' to be a regular expression which matches a letter
+followed by zero-or-more letters-or-digits.  A subsequent reference to
+
+         {DIGIT}+"."{DIGIT}*
+
+   is identical to
+
+         ([0-9])+"."([0-9])*
+
+   and matches one-or-more digits followed by a '.' followed by
+zero-or-more digits.
+
+   An unindented comment (i.e., a line beginning with '/*') is copied
+verbatim to the output up to the next '*/'.
+
+   Any _indented_ text or text enclosed in '%{' and '%}' is also copied
+verbatim to the output (with the %{ and %} symbols removed).  The %{ and
+%} symbols must appear unindented on lines by themselves.
+
+   A '%top' block is similar to a '%{' ...  '%}' block, except that the
+code in a '%top' block is relocated to the _top_ of the generated file,
+before any flex definitions (1).  The '%top' block is useful when you
+want certain preprocessor macros to be defined or certain files to be
+included before the generated code.  The single characters, '{' and '}'
+are used to delimit the '%top' block, as show in the example below:
+
+         %top{
+             /* This code goes at the "top" of the generated file. */
+             #include <stdint.h>
+             #include <inttypes.h>
+         }
+
+   Multiple '%top' blocks are allowed, and their order is preserved.
+
+   ---------- Footnotes ----------
+
+   (1) Actually, 'yyIN_HEADER' is defined before the '%top' block.
+
+
+File: flex.info,  Node: Rules Section,  Next: User Code Section,  Prev: Definitions Section,  Up: Format
+
+5.2 Format of the Rules Section
+===============================
+
+The "rules" section of the 'flex' input contains a series of rules of
+the form:
+
+         pattern   action
+
+   where the pattern must be unindented and the action must begin on the
+same line.  *Note Patterns::, for a further description of patterns and
+actions.
+
+   In the rules section, any indented or %{ %} enclosed text appearing
+before the first rule may be used to declare variables which are local
+to the scanning routine and (after the declarations) code which is to be
+executed whenever the scanning routine is entered.  Other indented or %{
+%} text in the rule section is still copied to the output, but its
+meaning is not well-defined and it may well cause compile-time errors
+(this feature is present for POSIX compliance.  *Note Lex and Posix::,
+for other such features).
+
+   Any _indented_ text or text enclosed in '%{' and '%}' is copied
+verbatim to the output (with the %{ and %} symbols removed).  The %{ and
+%} symbols must appear unindented on lines by themselves.
+
+
+File: flex.info,  Node: User Code Section,  Next: Comments in the Input,  Prev: Rules Section,  Up: Format
+
+5.3 Format of the User Code Section
+===================================
+
+The user code section is simply copied to 'lex.yy.c' verbatim.  It is
+used for companion routines which call or are called by the scanner.
+The presence of this section is optional; if it is missing, the second
+'%%' in the input file may be skipped, too.
+
+
+File: flex.info,  Node: Comments in the Input,  Prev: User Code Section,  Up: Format
+
+5.4 Comments in the Input
+=========================
+
+Flex supports C-style comments, that is, anything between '/*' and '*/'
+is considered a comment.  Whenever flex encounters a comment, it copies
+the entire comment verbatim to the generated source code.  Comments may
+appear just about anywhere, but with the following exceptions:
+
+   * Comments may not appear in the Rules Section wherever flex is
+     expecting a regular expression.  This means comments may not appear
+     at the beginning of a line, or immediately following a list of
+     scanner states.
+   * Comments may not appear on an '%option' line in the Definitions
+     Section.
+
+   If you want to follow a simple rule, then always begin a comment on a
+new line, with one or more whitespace characters before the initial
+'/*').  This rule will work anywhere in the input file.
+
+   All the comments in the following example are valid:
+
+     %{
+     /* code block */
+     %}
+
+     /* Definitions Section */
+     %x STATE_X
+
+     %%
+         /* Rules Section */
+     ruleA   /* after regex */ { /* code block */ } /* after code block */
+             /* Rules Section (indented) */
+     <STATE_X>{
+     ruleC   ECHO;
+     ruleD   ECHO;
+     %{
+     /* code block */
+     %}
+     }
+     %%
+     /* User Code Section */
+
+
+
+File: flex.info,  Node: Patterns,  Next: Matching,  Prev: Format,  Up: Top
+
+6 Patterns
+**********
+
+The patterns in the input (see *note Rules Section::) are written using
+an extended set of regular expressions.  These are:
+
+'x'
+     match the character 'x'
+
+'.'
+     any character (byte) except newline
+
+'[xyz]'
+     a "character class"; in this case, the pattern matches either an
+     'x', a 'y', or a 'z'
+
+'[abj-oZ]'
+     a "character class" with a range in it; matches an 'a', a 'b', any
+     letter from 'j' through 'o', or a 'Z'
+
+'[^A-Z]'
+     a "negated character class", i.e., any character but those in the
+     class.  In this case, any character EXCEPT an uppercase letter.
+
+'[^A-Z\n]'
+     any character EXCEPT an uppercase letter or a newline
+
+'[a-z]{-}[aeiou]'
+     the lowercase consonants
+
+'r*'
+     zero or more r's, where r is any regular expression
+
+'r+'
+     one or more r's
+
+'r?'
+     zero or one r's (that is, "an optional r")
+
+'r{2,5}'
+     anywhere from two to five r's
+
+'r{2,}'
+     two or more r's
+
+'r{4}'
+     exactly 4 r's
+
+'{name}'
+     the expansion of the 'name' definition (*note Format::).
+
+'"[xyz]\"foo"'
+     the literal string: '[xyz]"foo'
+
+'\X'
+     if X is 'a', 'b', 'f', 'n', 'r', 't', or 'v', then the ANSI-C
+     interpretation of '\x'.  Otherwise, a literal 'X' (used to escape
+     operators such as '*')
+
+'\0'
+     a NUL character (ASCII code 0)
+
+'\123'
+     the character with octal value 123
+
+'\x2a'
+     the character with hexadecimal value 2a
+
+'(r)'
+     match an 'r'; parentheses are used to override precedence (see
+     below)
+
+'(?r-s:pattern)'
+     apply option 'r' and omit option 's' while interpreting pattern.
+     Options may be zero or more of the characters 'i', 's', or 'x'.
+
+     'i' means case-insensitive.  '-i' means case-sensitive.
+
+     's' alters the meaning of the '.' syntax to match any single byte
+     whatsoever.  '-s' alters the meaning of '.' to match any byte
+     except '\n'.
+
+     'x' ignores comments and whitespace in patterns.  Whitespace is
+     ignored unless it is backslash-escaped, contained within '""'s, or
+     appears inside a character class.
+
+     The following are all valid:
+
+     (?:foo)         same as  (foo)
+     (?i:ab7)        same as  ([aA][bB]7)
+     (?-i:ab)        same as  (ab)
+     (?s:.)          same as  [\x00-\xFF]
+     (?-s:.)         same as  [^\n]
+     (?ix-s: a . b)  same as  ([Aa][^\n][bB])
+     (?x:a  b)       same as  ("ab")
+     (?x:a\ b)       same as  ("a b")
+     (?x:a" "b)      same as  ("a b")
+     (?x:a[ ]b)      same as  ("a b")
+     (?x:a
+         /* comment */
+         b
+         c)          same as  (abc)
+
+'(?# comment )'
+     omit everything within '()'.  The first ')' character encountered
+     ends the pattern.  It is not possible to for the comment to contain
+     a ')' character.  The comment may span lines.
+
+'rs'
+     the regular expression 'r' followed by the regular expression 's';
+     called "concatenation"
+
+'r|s'
+     either an 'r' or an 's'
+
+'r/s'
+     an 'r' but only if it is followed by an 's'.  The text matched by
+     's' is included when determining whether this rule is the longest
+     match, but is then returned to the input before the action is
+     executed.  So the action only sees the text matched by 'r'.  This
+     type of pattern is called "trailing context".  (There are some
+     combinations of 'r/s' that flex cannot match correctly.  *Note
+     Limitations::, regarding dangerous trailing context.)
+
+'^r'
+     an 'r', but only at the beginning of a line (i.e., when just
+     starting to scan, or right after a newline has been scanned).
+
+'r$'
+     an 'r', but only at the end of a line (i.e., just before a
+     newline).  Equivalent to 'r/\n'.
+
+     Note that 'flex''s notion of "newline" is exactly whatever the C
+     compiler used to compile 'flex' interprets '\n' as; in particular,
+     on some DOS systems you must either filter out '\r's in the input
+     yourself, or explicitly use 'r/\r\n' for 'r$'.
+
+'<s>r'
+     an 'r', but only in start condition 's' (see *note Start
+     Conditions:: for discussion of start conditions).
+
+'<s1,s2,s3>r'
+     same, but in any of start conditions 's1', 's2', or 's3'.
+
+'<*>r'
+     an 'r' in any start condition, even an exclusive one.
+
+'<<EOF>>'
+     an end-of-file.
+
+'<s1,s2><<EOF>>'
+     an end-of-file when in start condition 's1' or 's2'
+
+   Note that inside of a character class, all regular expression
+operators lose their special meaning except escape ('\') and the
+character class operators, '-', ']]', and, at the beginning of the
+class, '^'.
+
+   The regular expressions listed above are grouped according to
+precedence, from highest precedence at the top to lowest at the bottom.
+Those grouped together have equal precedence (see special note on the
+precedence of the repeat operator, '{}', under the documentation for the
+'--posix' POSIX compliance option).  For example,
+
+         foo|bar*
+
+   is the same as
+
+         (foo)|(ba(r*))
+
+   since the '*' operator has higher precedence than concatenation, and
+concatenation higher than alternation ('|').  This pattern therefore
+matches _either_ the string 'foo' _or_ the string 'ba' followed by
+zero-or-more 'r''s.  To match 'foo' or zero-or-more repetitions of the
+string 'bar', use:
+
+         foo|(bar)*
+
+   And to match a sequence of zero or more repetitions of 'foo' and
+'bar':
+
+         (foo|bar)*
+
+   In addition to characters and ranges of characters, character classes
+can also contain "character class expressions".  These are expressions
+enclosed inside '[:' and ':]' delimiters (which themselves must appear
+between the '[' and ']' of the character class.  Other elements may
+occur inside the character class, too).  The valid expressions are:
+
+         [:alnum:] [:alpha:] [:blank:]
+         [:cntrl:] [:digit:] [:graph:]
+         [:lower:] [:print:] [:punct:]
+         [:space:] [:upper:] [:xdigit:]
+
+   These expressions all designate a set of characters equivalent to the
+corresponding standard C 'isXXX' function.  For example, '[:alnum:]'
+designates those characters for which 'isalnum()' returns true - i.e.,
+any alphabetic or numeric character.  Some systems don't provide
+'isblank()', so flex defines '[:blank:]' as a blank or a tab.
+
+   For example, the following character classes are all equivalent:
+
+         [[:alnum:]]
+         [[:alpha:][:digit:]]
+         [[:alpha:][0-9]]
+         [a-zA-Z0-9]
+
+   A word of caution.  Character classes are expanded immediately when
+seen in the 'flex' input.  This means the character classes are
+sensitive to the locale in which 'flex' is executed, and the resulting
+scanner will not be sensitive to the runtime locale.  This may or may
+not be desirable.
+
+   * If your scanner is case-insensitive (the '-i' flag), then
+     '[:upper:]' and '[:lower:]' are equivalent to '[:alpha:]'.
+
+   * Character classes with ranges, such as '[a-Z]', should be used with
+     caution in a case-insensitive scanner if the range spans upper or
+     lowercase characters.  Flex does not know if you want to fold all
+     upper and lowercase characters together, or if you want the literal
+     numeric range specified (with no case folding).  When in doubt,
+     flex will assume that you meant the literal numeric range, and will
+     issue a warning.  The exception to this rule is a character range
+     such as '[a-z]' or '[S-W]' where it is obvious that you want
+     case-folding to occur.  Here are some examples with the '-i' flag
+     enabled:
+
+     Range        Result      Literal Range        Alternate Range
+     '[a-t]'      ok          '[a-tA-T]'
+     '[A-T]'      ok          '[a-tA-T]'
+     '[A-t]'      ambiguous   '[A-Z\[\\\]_`a-t]'   '[a-tA-T]'
+     '[_-{]'      ambiguous   '[_`a-z{]'           '[_`a-zA-Z{]'
+     '[@-C]'      ambiguous   '[@ABC]'             '[@A-Z\[\\\]_`abc]'
+
+   * A negated character class such as the example '[^A-Z]' above _will_
+     match a newline unless '\n' (or an equivalent escape sequence) is
+     one of the characters explicitly present in the negated character
+     class (e.g., '[^A-Z\n]').  This is unlike how many other regular
+     expression tools treat negated character classes, but unfortunately
+     the inconsistency is historically entrenched.  Matching newlines
+     means that a pattern like '[^"]*' can match the entire input unless
+     there's another quote in the input.
+
+     Flex allows negation of character class expressions by prepending
+     '^' to the POSIX character class name.
+
+              [:^alnum:] [:^alpha:] [:^blank:]
+              [:^cntrl:] [:^digit:] [:^graph:]
+              [:^lower:] [:^print:] [:^punct:]
+              [:^space:] [:^upper:] [:^xdigit:]
+
+     Flex will issue a warning if the expressions '[:^upper:]' and
+     '[:^lower:]' appear in a case-insensitive scanner, since their
+     meaning is unclear.  The current behavior is to skip them entirely,
+     but this may change without notice in future revisions of flex.
+
+   * 
+     The '{-}' operator computes the difference of two character
+     classes.  For example, '[a-c]{-}[b-z]' represents all the
+     characters in the class '[a-c]' that are not in the class '[b-z]'
+     (which in this case, is just the single character 'a').  The '{-}'
+     operator is left associative, so '[abc]{-}[b]{-}[c]' is the same as
+     '[a]'.  Be careful not to accidentally create an empty set, which
+     will never match.
+
+   * 
+     The '{+}' operator computes the union of two character classes.
+     For example, '[a-z]{+}[0-9]' is the same as '[a-z0-9]'.  This
+     operator is useful when preceded by the result of a difference
+     operation, as in, '[[:alpha:]]{-}[[:lower:]]{+}[q]', which is
+     equivalent to '[A-Zq]' in the "C" locale.
+
+   * A rule can have at most one instance of trailing context (the '/'
+     operator or the '$' operator).  The start condition, '^', and
+     '<<EOF>>' patterns can only occur at the beginning of a pattern,
+     and, as well as with '/' and '$', cannot be grouped inside
+     parentheses.  A '^' which does not occur at the beginning of a rule
+     or a '$' which does not occur at the end of a rule loses its
+     special properties and is treated as a normal character.
+
+   * The following are invalid:
+
+              foo/bar$
+              <sc1>foo<sc2>bar
+
+     Note that the first of these can be written 'foo/bar\n'.
+
+   * The following will result in '$' or '^' being treated as a normal
+     character:
+
+              foo|(bar$)
+              foo|^bar
+
+     If the desired meaning is a 'foo' or a 'bar'-followed-by-a-newline,
+     the following could be used (the special '|' action is explained
+     below, *note Actions::):
+
+              foo      |
+              bar$     /* action goes here */
+
+     A similar trick will work for matching a 'foo' or a
+     'bar'-at-the-beginning-of-a-line.
+
+
+File: flex.info,  Node: Matching,  Next: Actions,  Prev: Patterns,  Up: Top
+
+7 How the Input Is Matched
+**************************
+
+When the generated scanner is run, it analyzes its input looking for
+strings which match any of its patterns.  If it finds more than one
+match, it takes the one matching the most text (for trailing context
+rules, this includes the length of the trailing part, even though it
+will then be returned to the input).  If it finds two or more matches of
+the same length, the rule listed first in the 'flex' input file is
+chosen.
+
+   Once the match is determined, the text corresponding to the match
+(called the "token") is made available in the global character pointer
+'yytext', and its length in the global integer 'yyleng'.  The "action"
+corresponding to the matched pattern is then executed (*note Actions::),
+and then the remaining input is scanned for another match.
+
+   If no match is found, then the "default rule" is executed: the next
+character in the input is considered matched and copied to the standard
+output.  Thus, the simplest valid 'flex' input is:
+
+         %%
+
+   which generates a scanner that simply copies its input (one character
+at a time) to its output.
+
+   Note that 'yytext' can be defined in two different ways: either as a
+character _pointer_ or as a character _array_.  You can control which
+definition 'flex' uses by including one of the special directives
+'%pointer' or '%array' in the first (definitions) section of your flex
+input.  The default is '%pointer', unless you use the '-l' lex
+compatibility option, in which case 'yytext' will be an array.  The
+advantage of using '%pointer' is substantially faster scanning and no
+buffer overflow when matching very large tokens (unless you run out of
+dynamic memory).  The disadvantage is that you are restricted in how
+your actions can modify 'yytext' (*note Actions::), and calls to the
+'unput()' function destroys the present contents of 'yytext', which can
+be a considerable porting headache when moving between different 'lex'
+versions.
+
+   The advantage of '%array' is that you can then modify 'yytext' to
+your heart's content, and calls to 'unput()' do not destroy 'yytext'
+(*note Actions::).  Furthermore, existing 'lex' programs sometimes
+access 'yytext' externally using declarations of the form:
+
+         extern char yytext[];
+
+   This definition is erroneous when used with '%pointer', but correct
+for '%array'.
+
+   The '%array' declaration defines 'yytext' to be an array of 'YYLMAX'
+characters, which defaults to a fairly large value.  You can change the
+size by simply #define'ing 'YYLMAX' to a different value in the first
+section of your 'flex' input.  As mentioned above, with '%pointer'
+yytext grows dynamically to accommodate large tokens.  While this means
+your '%pointer' scanner can accommodate very large tokens (such as
+matching entire blocks of comments), bear in mind that each time the
+scanner must resize 'yytext' it also must rescan the entire token from
+the beginning, so matching such tokens can prove slow.  'yytext'
+presently does _not_ dynamically grow if a call to 'unput()' results in
+too much text being pushed back; instead, a run-time error results.
+
+   Also note that you cannot use '%array' with C++ scanner classes
+(*note Cxx::).
+
+
+File: flex.info,  Node: Actions,  Next: Generated Scanner,  Prev: Matching,  Up: Top
+
+8 Actions
+*********
+
+Each pattern in a rule has a corresponding "action", which can be any
+arbitrary C statement.  The pattern ends at the first non-escaped
+whitespace character; the remainder of the line is its action.  If the
+action is empty, then when the pattern is matched the input token is
+simply discarded.  For example, here is the specification for a program
+which deletes all occurrences of 'zap me' from its input:
+
+         %%
+         "zap me"
+
+   This example will copy all other characters in the input to the
+output since they will be matched by the default rule.
+
+   Here is a program which compresses multiple blanks and tabs down to a
+single blank, and throws away whitespace found at the end of a line:
+
+         %%
+         [ \t]+        putchar( ' ' );
+         [ \t]+$       /* ignore this token */
+
+   If the action contains a '{', then the action spans till the
+balancing '}' is found, and the action may cross multiple lines.  'flex'
+knows about C strings and comments and won't be fooled by braces found
+within them, but also allows actions to begin with '%{' and will
+consider the action to be all the text up to the next '%}' (regardless
+of ordinary braces inside the action).
+
+   An action consisting solely of a vertical bar ('|') means "same as
+the action for the next rule".  See below for an illustration.
+
+   Actions can include arbitrary C code, including 'return' statements
+to return a value to whatever routine called 'yylex()'.  Each time
+'yylex()' is called it continues processing tokens from where it last
+left off until it either reaches the end of the file or executes a
+return.
+
+   Actions are free to modify 'yytext' except for lengthening it (adding
+characters to its end-these will overwrite later characters in the input
+stream).  This however does not apply when using '%array' (*note
+Matching::).  In that case, 'yytext' may be freely modified in any way.
+
+   Actions are free to modify 'yyleng' except they should not do so if
+the action also includes use of 'yymore()' (see below).
+
+   There are a number of special directives which can be included within
+an action:
+
+'ECHO'
+     copies yytext to the scanner's output.
+
+'BEGIN'
+     followed by the name of a start condition places the scanner in the
+     corresponding start condition (see below).
+
+'REJECT'
+     directs the scanner to proceed on to the "second best" rule which
+     matched the input (or a prefix of the input).  The rule is chosen
+     as described above in *note Matching::, and 'yytext' and 'yyleng'
+     set up appropriately.  It may either be one which matched as much
+     text as the originally chosen rule but came later in the 'flex'
+     input file, or one which matched less text.  For example, the
+     following will both count the words in the input and call the
+     routine 'special()' whenever 'frob' is seen:
+
+                      int word_count = 0;
+              %%
+
+              frob        special(); REJECT;
+              [^ \t\n]+   ++word_count;
+
+     Without the 'REJECT', any occurrences of 'frob' in the input would
+     not be counted as words, since the scanner normally executes only
+     one action per token.  Multiple uses of 'REJECT' are allowed, each
+     one finding the next best choice to the currently active rule.  For
+     example, when the following scanner scans the token 'abcd', it will
+     write 'abcdabcaba' to the output:
+
+              %%
+              a        |
+              ab       |
+              abc      |
+              abcd     ECHO; REJECT;
+              .|\n     /* eat up any unmatched character */
+
+     The first three rules share the fourth's action since they use the
+     special '|' action.
+
+     'REJECT' is a particularly expensive feature in terms of scanner
+     performance; if it is used in _any_ of the scanner's actions it
+     will slow down _all_ of the scanner's matching.  Furthermore,
+     'REJECT' cannot be used with the '-Cf' or '-CF' options (*note
+     Scanner Options::).
+
+     Note also that unlike the other special actions, 'REJECT' is a
+     _branch_.  Code immediately following it in the action will _not_
+     be executed.
+
+'yymore()'
+     tells the scanner that the next time it matches a rule, the
+     corresponding token should be _appended_ onto the current value of
+     'yytext' rather than replacing it.  For example, given the input
+     'mega-kludge' the following will write 'mega-mega-kludge' to the
+     output:
+
+              %%
+              mega-    ECHO; yymore();
+              kludge   ECHO;
+
+     First 'mega-' is matched and echoed to the output.  Then 'kludge'
+     is matched, but the previous 'mega-' is still hanging around at the
+     beginning of 'yytext' so the 'ECHO' for the 'kludge' rule will
+     actually write 'mega-kludge'.
+
+   Two notes regarding use of 'yymore()'.  First, 'yymore()' depends on
+the value of 'yyleng' correctly reflecting the size of the current
+token, so you must not modify 'yyleng' if you are using 'yymore()'.
+Second, the presence of 'yymore()' in the scanner's action entails a
+minor performance penalty in the scanner's matching speed.
+
+   'yyless(n)' returns all but the first 'n' characters of the current
+token back to the input stream, where they will be rescanned when the
+scanner looks for the next match.  'yytext' and 'yyleng' are adjusted
+appropriately (e.g., 'yyleng' will now be equal to 'n').  For example,
+on the input 'foobar' the following will write out 'foobarbar':
+
+         %%
+         foobar    ECHO; yyless(3);
+         [a-z]+    ECHO;
+
+   An argument of 0 to 'yyless()' will cause the entire current input
+string to be scanned again.  Unless you've changed how the scanner will
+subsequently process its input (using 'BEGIN', for example), this will
+result in an endless loop.
+
+   Note that 'yyless()' is a macro and can only be used in the flex
+input file, not from other source files.
+
+   'unput(c)' puts the character 'c' back onto the input stream.  It
+will be the next character scanned.  The following action will take the
+current token and cause it to be rescanned enclosed in parentheses.
+
+         {
+         int i;
+         /* Copy yytext because unput() trashes yytext */
+         char *yycopy = strdup( yytext );
+         unput( ')' );
+         for ( i = yyleng - 1; i >= 0; --i )
+             unput( yycopy[i] );
+         unput( '(' );
+         free( yycopy );
+         }
+
+   Note that since each 'unput()' puts the given character back at the
+_beginning_ of the input stream, pushing back strings must be done
+back-to-front.
+
+   An important potential problem when using 'unput()' is that if you
+are using '%pointer' (the default), a call to 'unput()' _destroys_ the
+contents of 'yytext', starting with its rightmost character and
+devouring one character to the left with each call.  If you need the
+value of 'yytext' preserved after a call to 'unput()' (as in the above
+example), you must either first copy it elsewhere, or build your scanner
+using '%array' instead (*note Matching::).
+
+   Finally, note that you cannot put back 'EOF' to attempt to mark the
+input stream with an end-of-file.
+
+   'input()' reads the next character from the input stream.  For
+example, the following is one way to eat up C comments:
+
+         %%
+         "/*"        {
+                     int c;
+
+                     for ( ; ; )
+                         {
+                         while ( (c = input()) != '*' &&
+                                 c != EOF )
+                             ;    /* eat up text of comment */
+
+                         if ( c == '*' )
+                             {
+                             while ( (c = input()) == '*' )
+                                 ;
+                             if ( c == '/' )
+                                 break;    /* found the end */
+                             }
+
+                         if ( c == EOF )
+                             {
+                             error( "EOF in comment" );
+                             break;
+                             }
+                         }
+                     }
+
+   (Note that if the scanner is compiled using 'C++', then 'input()' is
+instead referred to as yyinput(), in order to avoid a name clash with
+the 'C++' stream by the name of 'input'.)
+
+   'YY_FLUSH_BUFFER;' flushes the scanner's internal buffer so that the
+next time the scanner attempts to match a token, it will first refill
+the buffer using 'YY_INPUT()' (*note Generated Scanner::).  This action
+is a special case of the more general 'yy_flush_buffer;' function,
+described below (*note Multiple Input Buffers::)
+
+   'yyterminate()' can be used in lieu of a return statement in an
+action.  It terminates the scanner and returns a 0 to the scanner's
+caller, indicating "all done".  By default, 'yyterminate()' is also
+called when an end-of-file is encountered.  It is a macro and may be
+redefined.
+
+
+File: flex.info,  Node: Generated Scanner,  Next: Start Conditions,  Prev: Actions,  Up: Top
+
+9 The Generated Scanner
+***********************
+
+The output of 'flex' is the file 'lex.yy.c', which contains the scanning
+routine 'yylex()', a number of tables used by it for matching tokens,
+and a number of auxiliary routines and macros.  By default, 'yylex()' is
+declared as follows:
+
+         int yylex()
+             {
+             ... various definitions and the actions in here ...
+             }
+
+   (If your environment supports function prototypes, then it will be
+'int yylex( void )'.)  This definition may be changed by defining the
+'YY_DECL' macro.  For example, you could use:
+
+         #define YY_DECL float lexscan( a, b ) float a, b;
+
+   to give the scanning routine the name 'lexscan', returning a float,
+and taking two floats as arguments.  Note that if you give arguments to
+the scanning routine using a K&R-style/non-prototyped function
+declaration, you must terminate the definition with a semi-colon (;).
+
+   'flex' generates 'C99' function definitions by default.  However flex
+does have the ability to generate obsolete, er, 'traditional', function
+definitions.  This is to support bootstrapping gcc on old systems.
+Unfortunately, traditional definitions prevent us from using any
+standard data types smaller than int (such as short, char, or bool) as
+function arguments.  For this reason, future versions of 'flex' may
+generate standard C99 code only, leaving K&R-style functions to the
+historians.  Currently, if you do *not* want 'C99' definitions, then you
+must use '%option noansi-definitions'.
+
+   Whenever 'yylex()' is called, it scans tokens from the global input
+file 'yyin' (which defaults to stdin).  It continues until it either
+reaches an end-of-file (at which point it returns the value 0) or one of
+its actions executes a 'return' statement.
+
+   If the scanner reaches an end-of-file, subsequent calls are undefined
+unless either 'yyin' is pointed at a new input file (in which case
+scanning continues from that file), or 'yyrestart()' is called.
+'yyrestart()' takes one argument, a 'FILE *' pointer (which can be NULL,
+if you've set up 'YY_INPUT' to scan from a source other than 'yyin'),
+and initializes 'yyin' for scanning from that file.  Essentially there
+is no difference between just assigning 'yyin' to a new input file or
+using 'yyrestart()' to do so; the latter is available for compatibility
+with previous versions of 'flex', and because it can be used to switch
+input files in the middle of scanning.  It can also be used to throw
+away the current input buffer, by calling it with an argument of 'yyin';
+but it would be better to use 'YY_FLUSH_BUFFER' (*note Actions::).  Note
+that 'yyrestart()' does _not_ reset the start condition to 'INITIAL'
+(*note Start Conditions::).
+
+   If 'yylex()' stops scanning due to executing a 'return' statement in
+one of the actions, the scanner may then be called again and it will
+resume scanning where it left off.
+
+   By default (and for purposes of efficiency), the scanner uses
+block-reads rather than simple 'getc()' calls to read characters from
+'yyin'.  The nature of how it gets its input can be controlled by
+defining the 'YY_INPUT' macro.  The calling sequence for 'YY_INPUT()' is
+'YY_INPUT(buf,result,max_size)'.  Its action is to place up to
+'max_size' characters in the character array 'buf' and return in the
+integer variable 'result' either the number of characters read or the
+constant 'YY_NULL' (0 on Unix systems) to indicate 'EOF'.  The default
+'YY_INPUT' reads from the global file-pointer 'yyin'.
+
+   Here is a sample definition of 'YY_INPUT' (in the definitions section
+of the input file):
+
+         %{
+         #define YY_INPUT(buf,result,max_size) \
+             { \
+             int c = getchar(); \
+             result = (c == EOF) ? YY_NULL : (buf[0] = c, 1); \
+             }
+         %}
+
+   This definition will change the input processing to occur one
+character at a time.
+
+   When the scanner receives an end-of-file indication from YY_INPUT, it
+then checks the 'yywrap()' function.  If 'yywrap()' returns false
+(zero), then it is assumed that the function has gone ahead and set up
+'yyin' to point to another input file, and scanning continues.  If it
+returns true (non-zero), then the scanner terminates, returning 0 to its
+caller.  Note that in either case, the start condition remains
+unchanged; it does _not_ revert to 'INITIAL'.
+
+   If you do not supply your own version of 'yywrap()', then you must
+either use '%option noyywrap' (in which case the scanner behaves as
+though 'yywrap()' returned 1), or you must link with '-lfl' to obtain
+the default version of the routine, which always returns 1.
+
+   For scanning from in-memory buffers (e.g., scanning strings), see
+*note Scanning Strings::.  *Note Multiple Input Buffers::.
+
+   The scanner writes its 'ECHO' output to the 'yyout' global (default,
+'stdout'), which may be redefined by the user simply by assigning it to
+some other 'FILE' pointer.
+
+
+File: flex.info,  Node: Start Conditions,  Next: Multiple Input Buffers,  Prev: Generated Scanner,  Up: Top
+
+10 Start Conditions
+*******************
+
+'flex' provides a mechanism for conditionally activating rules.  Any
+rule whose pattern is prefixed with '<sc>' will only be active when the
+scanner is in the "start condition" named 'sc'.  For example,
+
+         <STRING>[^"]*        { /* eat up the string body ... */
+                     ...
+                     }
+
+   will be active only when the scanner is in the 'STRING' start
+condition, and
+
+         <INITIAL,STRING,QUOTE>\.        { /* handle an escape ... */
+                     ...
+                     }
+
+   will be active only when the current start condition is either
+'INITIAL', 'STRING', or 'QUOTE'.
+
+   Start conditions are declared in the definitions (first) section of
+the input using unindented lines beginning with either '%s' or '%x'
+followed by a list of names.  The former declares "inclusive" start
+conditions, the latter "exclusive" start conditions.  A start condition
+is activated using the 'BEGIN' action.  Until the next 'BEGIN' action is
+executed, rules with the given start condition will be active and rules
+with other start conditions will be inactive.  If the start condition is
+inclusive, then rules with no start conditions at all will also be
+active.  If it is exclusive, then _only_ rules qualified with the start
+condition will be active.  A set of rules contingent on the same
+exclusive start condition describe a scanner which is independent of any
+of the other rules in the 'flex' input.  Because of this, exclusive
+start conditions make it easy to specify "mini-scanners" which scan
+portions of the input that are syntactically different from the rest
+(e.g., comments).
+
+   If the distinction between inclusive and exclusive start conditions
+is still a little vague, here's a simple example illustrating the
+connection between the two.  The set of rules:
+
+         %s example
+         %%
+
+         <example>foo   do_something();
+
+         bar            something_else();
+
+   is equivalent to
+
+         %x example
+         %%
+
+         <example>foo   do_something();
+
+         <INITIAL,example>bar    something_else();
+
+   Without the '<INITIAL,example>' qualifier, the 'bar' pattern in the
+second example wouldn't be active (i.e., couldn't match) when in start
+condition 'example'.  If we just used '<example>' to qualify 'bar',
+though, then it would only be active in 'example' and not in 'INITIAL',
+while in the first example it's active in both, because in the first
+example the 'example' start condition is an inclusive '(%s)' start
+condition.
+
+   Also note that the special start-condition specifier '<*>' matches
+every start condition.  Thus, the above example could also have been
+written:
+
+         %x example
+         %%
+
+         <example>foo   do_something();
+
+         <*>bar    something_else();
+
+   The default rule (to 'ECHO' any unmatched character) remains active
+in start conditions.  It is equivalent to:
+
+         <*>.|\n     ECHO;
+
+   'BEGIN(0)' returns to the original state where only the rules with no
+start conditions are active.  This state can also be referred to as the
+start-condition 'INITIAL', so 'BEGIN(INITIAL)' is equivalent to
+'BEGIN(0)'.  (The parentheses around the start condition name are not
+required but are considered good style.)
+
+   'BEGIN' actions can also be given as indented code at the beginning
+of the rules section.  For example, the following will cause the scanner
+to enter the 'SPECIAL' start condition whenever 'yylex()' is called and
+the global variable 'enter_special' is true:
+
+                 int enter_special;
+
+         %x SPECIAL
+         %%
+                 if ( enter_special )
+                     BEGIN(SPECIAL);
+
+         <SPECIAL>blahblahblah
+         ...more rules follow...
+
+   To illustrate the uses of start conditions, here is a scanner which
+provides two different interpretations of a string like '123.456'.  By
+default it will treat it as three tokens, the integer '123', a dot
+('.'), and the integer '456'.  But if the string is preceded earlier in
+the line by the string 'expect-floats' it will treat it as a single
+token, the floating-point number '123.456':
+
+         %{
+         #include <math.h>
+         %}
+         %s expect
+
+         %%
+         expect-floats        BEGIN(expect);
+
+         <expect>[0-9]+.[0-9]+      {
+                     printf( "found a float, = %f\n",
+                             atof( yytext ) );
+                     }
+         <expect>\n           {
+                     /* that's the end of the line, so
+                      * we need another "expect-number"
+                      * before we'll recognize any more
+                      * numbers
+                      */
+                     BEGIN(INITIAL);
+                     }
+
+         [0-9]+      {
+                     printf( "found an integer, = %d\n",
+                             atoi( yytext ) );
+                     }
+
+         "."         printf( "found a dot\n" );
+
+   Here is a scanner which recognizes (and discards) C comments while
+maintaining a count of the current input line.
+
+         %x comment
+         %%
+                 int line_num = 1;
+
+         "/*"         BEGIN(comment);
+
+         <comment>[^*\n]*        /* eat anything that's not a '*' */
+         <comment>"*"+[^*/\n]*   /* eat up '*'s not followed by '/'s */
+         <comment>\n             ++line_num;
+         <comment>"*"+"/"        BEGIN(INITIAL);
+
+   This scanner goes to a bit of trouble to match as much text as
+possible with each rule.  In general, when attempting to write a
+high-speed scanner try to match as much possible in each rule, as it's a
+big win.
+
+   Note that start-conditions names are really integer values and can be
+stored as such.  Thus, the above could be extended in the following
+fashion:
+
+         %x comment foo
+         %%
+                 int line_num = 1;
+                 int comment_caller;
+
+         "/*"         {
+                      comment_caller = INITIAL;
+                      BEGIN(comment);
+                      }
+
+         ...
+
+         <foo>"/*"    {
+                      comment_caller = foo;
+                      BEGIN(comment);
+                      }
+
+         <comment>[^*\n]*        /* eat anything that's not a '*' */
+         <comment>"*"+[^*/\n]*   /* eat up '*'s not followed by '/'s */
+         <comment>\n             ++line_num;
+         <comment>"*"+"/"        BEGIN(comment_caller);
+
+   Furthermore, you can access the current start condition using the
+integer-valued 'YY_START' macro.  For example, the above assignments to
+'comment_caller' could instead be written
+
+         comment_caller = YY_START;
+
+   Flex provides 'YYSTATE' as an alias for 'YY_START' (since that is
+what's used by AT&T 'lex').
+
+   For historical reasons, start conditions do not have their own
+name-space within the generated scanner.  The start condition names are
+unmodified in the generated scanner and generated header.  *Note
+option-header::.  *Note option-prefix::.
+
+   Finally, here's an example of how to match C-style quoted strings
+using exclusive start conditions, including expanded escape sequences
+(but not including checking for a string that's too long):
+
+         %x str
+
+         %%
+                 char string_buf[MAX_STR_CONST];
+                 char *string_buf_ptr;
+
+
+         \"      string_buf_ptr = string_buf; BEGIN(str);
+
+         <str>\"        { /* saw closing quote - all done */
+                 BEGIN(INITIAL);
+                 *string_buf_ptr = '\0';
+                 /* return string constant token type and
+                  * value to parser
+                  */
+                 }
+
+         <str>\n        {
+                 /* error - unterminated string constant */
+                 /* generate error message */
+                 }
+
+         <str>\\[0-7]{1,3} {
+                 /* octal escape sequence */
+                 int result;
+
+                 (void) sscanf( yytext + 1, "%o", &result );
+
+                 if ( result > 0xff )
+                         /* error, constant is out-of-bounds */
+
+                 *string_buf_ptr++ = result;
+                 }
+
+         <str>\\[0-9]+ {
+                 /* generate error - bad escape sequence; something
+                  * like '\48' or '\0777777'
+                  */
+                 }
+
+         <str>\\n  *string_buf_ptr++ = '\n';
+         <str>\\t  *string_buf_ptr++ = '\t';
+         <str>\\r  *string_buf_ptr++ = '\r';
+         <str>\\b  *string_buf_ptr++ = '\b';
+         <str>\\f  *string_buf_ptr++ = '\f';
+
+         <str>\\(.|\n)  *string_buf_ptr++ = yytext[1];
+
+         <str>[^\\\n\"]+        {
+                 char *yptr = yytext;
+
+                 while ( *yptr )
+                         *string_buf_ptr++ = *yptr++;
+                 }
+
+   Often, such as in some of the examples above, you wind up writing a
+whole bunch of rules all preceded by the same start condition(s).  Flex
+makes this a little easier and cleaner by introducing a notion of start
+condition "scope".  A start condition scope is begun with:
+
+         <SCs>{
+
+   where '<SCs>' is a list of one or more start conditions.  Inside the
+start condition scope, every rule automatically has the prefix '<SCs>'
+applied to it, until a '}' which matches the initial '{'.  So, for
+example,
+
+         <ESC>{
+             "\\n"   return '\n';
+             "\\r"   return '\r';
+             "\\f"   return '\f';
+             "\\0"   return '\0';
+         }
+
+   is equivalent to:
+
+         <ESC>"\\n"  return '\n';
+         <ESC>"\\r"  return '\r';
+         <ESC>"\\f"  return '\f';
+         <ESC>"\\0"  return '\0';
+
+   Start condition scopes may be nested.
+
+   The following routines are available for manipulating stacks of start
+conditions:
+
+ -- Function: void yy_push_state ( int 'new_state' )
+     pushes the current start condition onto the top of the start
+     condition stack and switches to 'new_state' as though you had used
+     'BEGIN new_state' (recall that start condition names are also
+     integers).
+
+ -- Function: void yy_pop_state ()
+     pops the top of the stack and switches to it via 'BEGIN'.
+
+ -- Function: int yy_top_state ()
+     returns the top of the stack without altering the stack's contents.
+
+   The start condition stack grows dynamically and so has no built-in
+size limitation.  If memory is exhausted, program execution aborts.
+
+   To use start condition stacks, your scanner must include a '%option
+stack' directive (*note Scanner Options::).
+
+
+File: flex.info,  Node: Multiple Input Buffers,  Next: EOF,  Prev: Start Conditions,  Up: Top
+
+11 Multiple Input Buffers
+*************************
+
+Some scanners (such as those which support "include" files) require
+reading from several input streams.  As 'flex' scanners do a large
+amount of buffering, one cannot control where the next input will be
+read from by simply writing a 'YY_INPUT()' which is sensitive to the
+scanning context.  'YY_INPUT()' is only called when the scanner reaches
+the end of its buffer, which may be a long time after scanning a
+statement such as an 'include' statement which requires switching the
+input source.
+
+   To negotiate these sorts of problems, 'flex' provides a mechanism for
+creating and switching between multiple input buffers.  An input buffer
+is created by using:
+
+ -- Function: YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size )
+
+   which takes a 'FILE' pointer and a size and creates a buffer
+associated with the given file and large enough to hold 'size'
+characters (when in doubt, use 'YY_BUF_SIZE' for the size).  It returns
+a 'YY_BUFFER_STATE' handle, which may then be passed to other routines
+(see below).  The 'YY_BUFFER_STATE' type is a pointer to an opaque
+'struct yy_buffer_state' structure, so you may safely initialize
+'YY_BUFFER_STATE' variables to '((YY_BUFFER_STATE) 0)' if you wish, and
+also refer to the opaque structure in order to correctly declare input
+buffers in source files other than that of your scanner.  Note that the
+'FILE' pointer in the call to 'yy_create_buffer' is only used as the
+value of 'yyin' seen by 'YY_INPUT'.  If you redefine 'YY_INPUT()' so it
+no longer uses 'yyin', then you can safely pass a NULL 'FILE' pointer to
+'yy_create_buffer'.  You select a particular buffer to scan from using:
+
+ -- Function: void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer )
+
+   The above function switches the scanner's input buffer so subsequent
+tokens will come from 'new_buffer'.  Note that 'yy_switch_to_buffer()'
+may be used by 'yywrap()' to set things up for continued scanning,
+instead of opening a new file and pointing 'yyin' at it.  If you are
+looking for a stack of input buffers, then you want to use
+'yypush_buffer_state()' instead of this function.  Note also that
+switching input sources via either 'yy_switch_to_buffer()' or 'yywrap()'
+does _not_ change the start condition.
+
+ -- Function: void yy_delete_buffer ( YY_BUFFER_STATE buffer )
+
+   is used to reclaim the storage associated with a buffer.  ('buffer'
+can be NULL, in which case the routine does nothing.)  You can also
+clear the current contents of a buffer using:
+
+ -- Function: void yypush_buffer_state ( YY_BUFFER_STATE buffer )
+
+   This function pushes the new buffer state onto an internal stack.
+The pushed state becomes the new current state.  The stack is maintained
+by flex and will grow as required.  This function is intended to be used
+instead of 'yy_switch_to_buffer', when you want to change states, but
+preserve the current state for later use.
+
+ -- Function: void yypop_buffer_state ( )
+
+   This function removes the current state from the top of the stack,
+and deletes it by calling 'yy_delete_buffer'.  The next state on the
+stack, if any, becomes the new current state.
+
+ -- Function: void yy_flush_buffer ( YY_BUFFER_STATE buffer )
+
+   This function discards the buffer's contents, so the next time the
+scanner attempts to match a token from the buffer, it will first fill
+the buffer anew using 'YY_INPUT()'.
+
+ -- Function: YY_BUFFER_STATE yy_new_buffer ( FILE *file, int size )
+
+   is an alias for 'yy_create_buffer()', provided for compatibility with
+the C++ use of 'new' and 'delete' for creating and destroying dynamic
+objects.
+
+   'YY_CURRENT_BUFFER' macro returns a 'YY_BUFFER_STATE' handle to the
+current buffer.  It should not be used as an lvalue.
+
+   Here are two examples of using these features for writing a scanner
+which expands include files (the '<<EOF>>' feature is discussed below).
+
+   This first example uses yypush_buffer_state and yypop_buffer_state.
+Flex maintains the stack internally.
+
+         /* the "incl" state is used for picking up the name
+          * of an include file
+          */
+         %x incl
+         %%
+         include             BEGIN(incl);
+
+         [a-z]+              ECHO;
+         [^a-z\n]*\n?        ECHO;
+
+         <incl>[ \t]*      /* eat the whitespace */
+         <incl>[^ \t\n]+   { /* got the include file name */
+                 yyin = fopen( yytext, "r" );
+
+                 if ( ! yyin )
+                     error( ... );
+
+     			yypush_buffer_state(yy_create_buffer( yyin, YY_BUF_SIZE ));
+
+                 BEGIN(INITIAL);
+                 }
+
+         <<EOF>> {
+     			yypop_buffer_state();
+
+                 if ( !YY_CURRENT_BUFFER )
+                     {
+                     yyterminate();
+                     }
+                 }
+
+   The second example, below, does the same thing as the previous
+example did, but manages its own input buffer stack manually (instead of
+letting flex do it).
+
+         /* the "incl" state is used for picking up the name
+          * of an include file
+          */
+         %x incl
+
+         %{
+         #define MAX_INCLUDE_DEPTH 10
+         YY_BUFFER_STATE include_stack[MAX_INCLUDE_DEPTH];
+         int include_stack_ptr = 0;
+         %}
+
+         %%
+         include             BEGIN(incl);
+
+         [a-z]+              ECHO;
+         [^a-z\n]*\n?        ECHO;
+
+         <incl>[ \t]*      /* eat the whitespace */
+         <incl>[^ \t\n]+   { /* got the include file name */
+                 if ( include_stack_ptr >= MAX_INCLUDE_DEPTH )
+                     {
+                     fprintf( stderr, "Includes nested too deeply" );
+                     exit( 1 );
+                     }
+
+                 include_stack[include_stack_ptr++] =
+                     YY_CURRENT_BUFFER;
+
+                 yyin = fopen( yytext, "r" );
+
+                 if ( ! yyin )
+                     error( ... );
+
+                 yy_switch_to_buffer(
+                     yy_create_buffer( yyin, YY_BUF_SIZE ) );
+
+                 BEGIN(INITIAL);
+                 }
+
+         <<EOF>> {
+                 if ( --include_stack_ptr  0 )
+                     {
+                     yyterminate();
+                     }
+
+                 else
+                     {
+                     yy_delete_buffer( YY_CURRENT_BUFFER );
+                     yy_switch_to_buffer(
+                          include_stack[include_stack_ptr] );
+                     }
+                 }
+
+   The following routines are available for setting up input buffers for
+scanning in-memory strings instead of files.  All of them create a new
+input buffer for scanning the string, and return a corresponding
+'YY_BUFFER_STATE' handle (which you should delete with
+'yy_delete_buffer()' when done with it).  They also switch to the new
+buffer using 'yy_switch_to_buffer()', so the next call to 'yylex()' will
+start scanning the string.
+
+ -- Function: YY_BUFFER_STATE yy_scan_string ( const char *str )
+     scans a NUL-terminated string.
+
+ -- Function: YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len
+          )
+     scans 'len' bytes (including possibly 'NUL's) starting at location
+     'bytes'.
+
+   Note that both of these functions create and scan a _copy_ of the
+string or bytes.  (This may be desirable, since 'yylex()' modifies the
+contents of the buffer it is scanning.)  You can avoid the copy by
+using:
+
+ -- Function: YY_BUFFER_STATE yy_scan_buffer (char *base, yy_size_t
+          size)
+     which scans in place the buffer starting at 'base', consisting of
+     'size' bytes, the last two bytes of which _must_ be
+     'YY_END_OF_BUFFER_CHAR' (ASCII NUL). These last two bytes are not
+     scanned; thus, scanning consists of 'base[0]' through
+     'base[size-2]', inclusive.
+
+   If you fail to set up 'base' in this manner (i.e., forget the final
+two 'YY_END_OF_BUFFER_CHAR' bytes), then 'yy_scan_buffer()' returns a
+NULL pointer instead of creating a new input buffer.
+
+ -- Data type: yy_size_t
+     is an integral type to which you can cast an integer expression
+     reflecting the size of the buffer.
+
+
+File: flex.info,  Node: EOF,  Next: Misc Macros,  Prev: Multiple Input Buffers,  Up: Top
+
+12 End-of-File Rules
+********************
+
+The special rule '<<EOF>>' indicates actions which are to be taken when
+an end-of-file is encountered and 'yywrap()' returns non-zero (i.e.,
+indicates no further files to process).  The action must finish by doing
+one of the following things:
+
+   * assigning 'yyin' to a new input file (in previous versions of
+     'flex', after doing the assignment you had to call the special
+     action 'YY_NEW_FILE'.  This is no longer necessary.)
+
+   * executing a 'return' statement;
+
+   * executing the special 'yyterminate()' action.
+
+   * or, switching to a new buffer using 'yy_switch_to_buffer()' as
+     shown in the example above.
+
+   <<EOF>> rules may not be used with other patterns; they may only be
+qualified with a list of start conditions.  If an unqualified <<EOF>>
+rule is given, it applies to _all_ start conditions which do not already
+have <<EOF>> actions.  To specify an <<EOF>> rule for only the initial
+start condition, use:
+
+         <INITIAL><<EOF>>
+
+   These rules are useful for catching things like unclosed comments.
+An example:
+
+         %x quote
+         %%
+
+         ...other rules for dealing with quotes...
+
+         <quote><<EOF>>   {
+                  error( "unterminated quote" );
+                  yyterminate();
+                  }
+        <<EOF>>  {
+                  if ( *++filelist )
+                      yyin = fopen( *filelist, "r" );
+                  else
+                     yyterminate();
+                  }
+
+
+File: flex.info,  Node: Misc Macros,  Next: User Values,  Prev: EOF,  Up: Top
+
+13 Miscellaneous Macros
+***********************
+
+The macro 'YY_USER_ACTION' can be defined to provide an action which is
+always executed prior to the matched rule's action.  For example, it
+could be #define'd to call a routine to convert yytext to lower-case.
+When 'YY_USER_ACTION' is invoked, the variable 'yy_act' gives the number
+of the matched rule (rules are numbered starting with 1).  Suppose you
+want to profile how often each of your rules is matched.  The following
+would do the trick:
+
+         #define YY_USER_ACTION ++ctr[yy_act]
+
+   where 'ctr' is an array to hold the counts for the different rules.
+Note that the macro 'YY_NUM_RULES' gives the total number of rules
+(including the default rule), even if you use '-s)', so a correct
+declaration for 'ctr' is:
+
+         int ctr[YY_NUM_RULES];
+
+   The macro 'YY_USER_INIT' may be defined to provide an action which is
+always executed before the first scan (and before the scanner's internal
+initializations are done).  For example, it could be used to call a
+routine to read in a data table or open a logging file.
+
+   The macro 'yy_set_interactive(is_interactive)' can be used to control
+whether the current buffer is considered "interactive".  An interactive
+buffer is processed more slowly, but must be used when the scanner's
+input source is indeed interactive to avoid problems due to waiting to
+fill buffers (see the discussion of the '-I' flag in *note Scanner
+Options::).  A non-zero value in the macro invocation marks the buffer
+as interactive, a zero value as non-interactive.  Note that use of this
+macro overrides '%option always-interactive' or '%option
+never-interactive' (*note Scanner Options::).  'yy_set_interactive()'
+must be invoked prior to beginning to scan the buffer that is (or is
+not) to be considered interactive.
+
+   The macro 'yy_set_bol(at_bol)' can be used to control whether the
+current buffer's scanning context for the next token match is done as
+though at the beginning of a line.  A non-zero macro argument makes
+rules anchored with '^' active, while a zero argument makes '^' rules
+inactive.
+
+   The macro 'YY_AT_BOL()' returns true if the next token scanned from
+the current buffer will have '^' rules active, false otherwise.
+
+   In the generated scanner, the actions are all gathered in one large
+switch statement and separated using 'YY_BREAK', which may be redefined.
+By default, it is simply a 'break', to separate each rule's action from
+the following rule's.  Redefining 'YY_BREAK' allows, for example, C++
+users to #define YY_BREAK to do nothing (while being very careful that
+every rule ends with a 'break' or a 'return'!)  to avoid suffering from
+unreachable statement warnings where because a rule's action ends with
+'return', the 'YY_BREAK' is inaccessible.
+
+
+File: flex.info,  Node: User Values,  Next: Yacc,  Prev: Misc Macros,  Up: Top
+
+14 Values Available To the User
+*******************************
+
+This chapter summarizes the various values available to the user in the
+rule actions.
+
+'char *yytext'
+     holds the text of the current token.  It may be modified but not
+     lengthened (you cannot append characters to the end).
+
+     If the special directive '%array' appears in the first section of
+     the scanner description, then 'yytext' is instead declared 'char
+     yytext[YYLMAX]', where 'YYLMAX' is a macro definition that you can
+     redefine in the first section if you don't like the default value
+     (generally 8KB). Using '%array' results in somewhat slower
+     scanners, but the value of 'yytext' becomes immune to calls to
+     'unput()', which potentially destroy its value when 'yytext' is a
+     character pointer.  The opposite of '%array' is '%pointer', which
+     is the default.
+
+     You cannot use '%array' when generating C++ scanner classes (the
+     '-+' flag).
+
+'int yyleng'
+     holds the length of the current token.
+
+'FILE *yyin'
+     is the file which by default 'flex' reads from.  It may be
+     redefined but doing so only makes sense before scanning begins or
+     after an EOF has been encountered.  Changing it in the midst of
+     scanning will have unexpected results since 'flex' buffers its
+     input; use 'yyrestart()' instead.  Once scanning terminates because
+     an end-of-file has been seen, you can assign 'yyin' at the new
+     input file and then call the scanner again to continue scanning.
+
+'void yyrestart( FILE *new_file )'
+     may be called to point 'yyin' at the new input file.  The
+     switch-over to the new file is immediate (any previously
+     buffered-up input is lost).  Note that calling 'yyrestart()' with
+     'yyin' as an argument thus throws away the current input buffer and
+     continues scanning the same input file.
+
+'FILE *yyout'
+     is the file to which 'ECHO' actions are done.  It can be reassigned
+     by the user.
+
+'YY_CURRENT_BUFFER'
+     returns a 'YY_BUFFER_STATE' handle to the current buffer.
+
+'YY_START'
+     returns an integer value corresponding to the current start
+     condition.  You can subsequently use this value with 'BEGIN' to
+     return to that start condition.
+
+
+File: flex.info,  Node: Yacc,  Next: Scanner Options,  Prev: User Values,  Up: Top
+
+15 Interfacing with Yacc
+************************
+
+One of the main uses of 'flex' is as a companion to the 'yacc'
+parser-generator.  'yacc' parsers expect to call a routine named
+'yylex()' to find the next input token.  The routine is supposed to
+return the type of the next token as well as putting any associated
+value in the global 'yylval'.  To use 'flex' with 'yacc', one specifies
+the '-d' option to 'yacc' to instruct it to generate the file 'y.tab.h'
+containing definitions of all the '%tokens' appearing in the 'yacc'
+input.  This file is then included in the 'flex' scanner.  For example,
+if one of the tokens is 'TOK_NUMBER', part of the scanner might look
+like:
+
+         %{
+         #include "y.tab.h"
+         %}
+
+         %%
+
+         [0-9]+        yylval = atoi( yytext ); return TOK_NUMBER;
+
+
+File: flex.info,  Node: Scanner Options,  Next: Performance,  Prev: Yacc,  Up: Top
+
+16 Scanner Options
+******************
+
+The various 'flex' options are categorized by function in the following
+menu.  If you want to lookup a particular option by name, *Note Index of
+Scanner Options::.
+
+* Menu:
+
+* Options for Specifying Filenames::  
+* Options Affecting Scanner Behavior::  
+* Code-Level And API Options::  
+* Options for Scanner Speed and Size::  
+* Debugging Options::           
+* Miscellaneous Options::       
+
+   Even though there are many scanner options, a typical scanner might
+only specify the following options:
+
+     %option   8bit reentrant bison-bridge
+     %option   warn nodefault
+     %option   yylineno
+     %option   outfile="scanner.c" header-file="scanner.h"
+
+   The first line specifies the general type of scanner we want.  The
+second line specifies that we are being careful.  The third line asks
+flex to track line numbers.  The last line tells flex what to name the
+files.  (The options can be specified in any order.  We just divided
+them.)
+
+   'flex' also provides a mechanism for controlling options within the
+scanner specification itself, rather than from the flex command-line.
+This is done by including '%option' directives in the first section of
+the scanner specification.  You can specify multiple options with a
+single '%option' directive, and multiple directives in the first section
+of your flex input file.
+
+   Most options are given simply as names, optionally preceded by the
+word 'no' (with no intervening whitespace) to negate their meaning.  The
+names are the same as their long-option equivalents (but without the
+leading '--' ).
+
+   'flex' scans your rule actions to determine whether you use the
+'REJECT' or 'yymore()' features.  The 'REJECT' and 'yymore' options are
+available to override its decision as to whether you use the options,
+either by setting them (e.g., '%option reject)' to indicate the feature
+is indeed used, or unsetting them to indicate it actually is not used
+(e.g., '%option noyymore)'.
+
+   A number of options are available for lint purists who want to
+suppress the appearance of unneeded routines in the generated scanner.
+Each of the following, if unset (e.g., '%option nounput'), results in
+the corresponding routine not appearing in the generated scanner:
+
+         input, unput
+         yy_push_state, yy_pop_state, yy_top_state
+         yy_scan_buffer, yy_scan_bytes, yy_scan_string
+
+         yyget_extra, yyset_extra, yyget_leng, yyget_text,
+         yyget_lineno, yyset_lineno, yyget_in, yyset_in,
+         yyget_out, yyset_out, yyget_lval, yyset_lval,
+         yyget_lloc, yyset_lloc, yyget_debug, yyset_debug
+
+   (though 'yy_push_state()' and friends won't appear anyway unless you
+use '%option stack)'.
+
+
+File: flex.info,  Node: Options for Specifying Filenames,  Next: Options Affecting Scanner Behavior,  Prev: Scanner Options,  Up: Scanner Options
+
+16.1 Options for Specifying Filenames
+=====================================
+
+'--header-file=FILE, '%option header-file="FILE"''
+     instructs flex to write a C header to 'FILE'.  This file contains
+     function prototypes, extern variables, and types used by the
+     scanner.  Only the external API is exported by the header file.
+     Many macros that are usable from within scanner actions are not
+     exported to the header file.  This is due to namespace problems and
+     the goal of a clean external API.
+
+     While in the header, the macro 'yyIN_HEADER' is defined, where 'yy'
+     is substituted with the appropriate prefix.
+
+     The '--header-file' option is not compatible with the '--c++'
+     option, since the C++ scanner provides its own header in
+     'yyFlexLexer.h'.
+
+'-oFILE, --outfile=FILE, '%option outfile="FILE"''
+     directs flex to write the scanner to the file 'FILE' instead of
+     'lex.yy.c'.  If you combine '--outfile' with the '--stdout' option,
+     then the scanner is written to 'stdout' but its '#line' directives
+     (see the '-l' option above) refer to the file 'FILE'.
+
+'-t, --stdout, '%option stdout''
+     instructs 'flex' to write the scanner it generates to standard
+     output instead of 'lex.yy.c'.
+
+'-SFILE, --skel=FILE'
+     overrides the default skeleton file from which 'flex' constructs
+     its scanners.  You'll never need this option unless you are doing
+     'flex' maintenance or development.
+
+'--tables-file=FILE'
+     Write serialized scanner dfa tables to FILE. The generated scanner
+     will not contain the tables, and requires them to be loaded at
+     runtime.  *Note serialization::.
+
+'--tables-verify'
+     This option is for flex development.  We document it here in case
+     you stumble upon it by accident or in case you suspect some
+     inconsistency in the serialized tables.  Flex will serialize the
+     scanner dfa tables but will also generate the in-code tables as it
+     normally does.  At runtime, the scanner will verify that the
+     serialized tables match the in-code tables, instead of loading
+     them.
+
+
+File: flex.info,  Node: Options Affecting Scanner Behavior,  Next: Code-Level And API Options,  Prev: Options for Specifying Filenames,  Up: Scanner Options
+
+16.2 Options Affecting Scanner Behavior
+=======================================
+
+'-i, --case-insensitive, '%option case-insensitive''
+     instructs 'flex' to generate a "case-insensitive" scanner.  The
+     case of letters given in the 'flex' input patterns will be ignored,
+     and tokens in the input will be matched regardless of case.  The
+     matched text given in 'yytext' will have the preserved case (i.e.,
+     it will not be folded).  For tricky behavior, see *note case and
+     character ranges::.
+
+'-l, --lex-compat, '%option lex-compat''
+     turns on maximum compatibility with the original AT&T 'lex'
+     implementation.  Note that this does not mean _full_ compatibility.
+     Use of this option costs a considerable amount of performance, and
+     it cannot be used with the '--c++', '--full', '--fast', '-Cf', or
+     '-CF' options.  For details on the compatibilities it provides, see
+     *note Lex and Posix::.  This option also results in the name
+     'YY_FLEX_LEX_COMPAT' being '#define''d in the generated scanner.
+
+'-B, --batch, '%option batch''
+     instructs 'flex' to generate a "batch" scanner, the opposite of
+     _interactive_ scanners generated by '--interactive' (see below).
+     In general, you use '-B' when you are _certain_ that your scanner
+     will never be used interactively, and you want to squeeze a
+     _little_ more performance out of it.  If your goal is instead to
+     squeeze out a _lot_ more performance, you should be using the '-Cf'
+     or '-CF' options, which turn on '--batch' automatically anyway.
+
+'-I, --interactive, '%option interactive''
+     instructs 'flex' to generate an interactive scanner.  An
+     interactive scanner is one that only looks ahead to decide what
+     token has been matched if it absolutely must.  It turns out that
+     always looking one extra character ahead, even if the scanner has
+     already seen enough text to disambiguate the current token, is a
+     bit faster than only looking ahead when necessary.  But scanners
+     that always look ahead give dreadful interactive performance; for
+     example, when a user types a newline, it is not recognized as a
+     newline token until they enter _another_ token, which often means
+     typing in another whole line.
+
+     'flex' scanners default to 'interactive' unless you use the '-Cf'
+     or '-CF' table-compression options (*note Performance::).  That's
+     because if you're looking for high-performance you should be using
+     one of these options, so if you didn't, 'flex' assumes you'd rather
+     trade off a bit of run-time performance for intuitive interactive
+     behavior.  Note also that you _cannot_ use '--interactive' in
+     conjunction with '-Cf' or '-CF'.  Thus, this option is not really
+     needed; it is on by default for all those cases in which it is
+     allowed.
+
+     You can force a scanner to _not_ be interactive by using '--batch'
+
+'-7, --7bit, '%option 7bit''
+     instructs 'flex' to generate a 7-bit scanner, i.e., one which can
+     only recognize 7-bit characters in its input.  The advantage of
+     using '--7bit' is that the scanner's tables can be up to half the
+     size of those generated using the '--8bit'.  The disadvantage is
+     that such scanners often hang or crash if their input contains an
+     8-bit character.
+
+     Note, however, that unless you generate your scanner using the
+     '-Cf' or '-CF' table compression options, use of '--7bit' will save
+     only a small amount of table space, and make your scanner
+     considerably less portable.  'Flex''s default behavior is to
+     generate an 8-bit scanner unless you use the '-Cf' or '-CF', in
+     which case 'flex' defaults to generating 7-bit scanners unless your
+     site was always configured to generate 8-bit scanners (as will
+     often be the case with non-USA sites).  You can tell whether flex
+     generated a 7-bit or an 8-bit scanner by inspecting the flag
+     summary in the '--verbose' output as described above.
+
+     Note that if you use '-Cfe' or '-CFe' 'flex' still defaults to
+     generating an 8-bit scanner, since usually with these compression
+     options full 8-bit tables are not much more expensive than 7-bit
+     tables.
+
+'-8, --8bit, '%option 8bit''
+     instructs 'flex' to generate an 8-bit scanner, i.e., one which can
+     recognize 8-bit characters.  This flag is only needed for scanners
+     generated using '-Cf' or '-CF', as otherwise flex defaults to
+     generating an 8-bit scanner anyway.
+
+     See the discussion of '--7bit' above for 'flex''s default behavior
+     and the tradeoffs between 7-bit and 8-bit scanners.
+
+'--default, '%option default''
+     generate the default rule.
+
+'--always-interactive, '%option always-interactive''
+     instructs flex to generate a scanner which always considers its
+     input _interactive_.  Normally, on each new input file the scanner
+     calls 'isatty()' in an attempt to determine whether the scanner's
+     input source is interactive and thus should be read a character at
+     a time.  When this option is used, however, then no such call is
+     made.
+
+'--never-interactive, '--never-interactive''
+     instructs flex to generate a scanner which never considers its
+     input interactive.  This is the opposite of 'always-interactive'.
+
+'-X, --posix, '%option posix''
+     turns on maximum compatibility with the POSIX 1003.2-1992
+     definition of 'lex'.  Since 'flex' was originally designed to
+     implement the POSIX definition of 'lex' this generally involves
+     very few changes in behavior.  At the current writing the known
+     differences between 'flex' and the POSIX standard are:
+
+        * In POSIX and AT&T 'lex', the repeat operator, '{}', has lower
+          precedence than concatenation (thus 'ab{3}' yields 'ababab').
+          Most POSIX utilities use an Extended Regular Expression (ERE)
+          precedence that has the precedence of the repeat operator
+          higher than concatenation (which causes 'ab{3}' to yield
+          'abbb').  By default, 'flex' places the precedence of the
+          repeat operator higher than concatenation which matches the
+          ERE processing of other POSIX utilities.  When either
+          '--posix' or '-l' are specified, 'flex' will use the
+          traditional AT&T and POSIX-compliant precedence for the repeat
+          operator where concatenation has higher precedence than the
+          repeat operator.
+
+'--stack, '%option stack''
+     enables the use of start condition stacks (*note Start
+     Conditions::).
+
+'--stdinit, '%option stdinit''
+     if set (i.e., %option stdinit) initializes 'yyin' and 'yyout' to
+     'stdin' and 'stdout', instead of the default of 'NULL'.  Some
+     existing 'lex' programs depend on this behavior, even though it is
+     not compliant with ANSI C, which does not require 'stdin' and
+     'stdout' to be compile-time constant.  In a reentrant scanner,
+     however, this is not a problem since initialization is performed in
+     'yylex_init' at runtime.
+
+'--yylineno, '%option yylineno''
+     directs 'flex' to generate a scanner that maintains the number of
+     the current line read from its input in the global variable
+     'yylineno'.  This option is implied by '%option lex-compat'.  In a
+     reentrant C scanner, the macro 'yylineno' is accessible regardless
+     of the value of '%option yylineno', however, its value is not
+     modified by 'flex' unless '%option yylineno' is enabled.
+
+'--yywrap, '%option yywrap''
+     if unset (i.e., '--noyywrap)', makes the scanner not call
+     'yywrap()' upon an end-of-file, but simply assume that there are no
+     more files to scan (until the user points 'yyin' at a new file and
+     calls 'yylex()' again).
+
+
+File: flex.info,  Node: Code-Level And API Options,  Next: Options for Scanner Speed and Size,  Prev: Options Affecting Scanner Behavior,  Up: Scanner Options
+
+16.3 Code-Level And API Options
+===============================
+
+'--ansi-definitions, '%option ansi-definitions''
+     instruct flex to generate ANSI C99 definitions for functions.  This
+     option is enabled by default.  If '%option noansi-definitions' is
+     specified, then the obsolete style is generated.
+
+'--ansi-prototypes, '%option ansi-prototypes''
+     instructs flex to generate ANSI C99 prototypes for functions.  This
+     option is enabled by default.  If 'noansi-prototypes' is specified,
+     then prototypes will have empty parameter lists.
+
+'--bison-bridge, '%option bison-bridge''
+     instructs flex to generate a C scanner that is meant to be called
+     by a 'GNU bison' parser.  The scanner has minor API changes for
+     'bison' compatibility.  In particular, the declaration of 'yylex'
+     is modified to take an additional parameter, 'yylval'.  *Note Bison
+     Bridge::.
+
+'--bison-locations, '%option bison-locations''
+     instruct flex that 'GNU bison' '%locations' are being used.  This
+     means 'yylex' will be passed an additional parameter, 'yylloc'.
+     This option implies '%option bison-bridge'.  *Note Bison Bridge::.
+
+'-L, --noline, '%option noline''
+     instructs 'flex' not to generate '#line' directives.  Without this
+     option, 'flex' peppers the generated scanner with '#line'
+     directives so error messages in the actions will be correctly
+     located with respect to either the original 'flex' input file (if
+     the errors are due to code in the input file), or 'lex.yy.c' (if
+     the errors are 'flex''s fault - you should report these sorts of
+     errors to the email address given in *note Reporting Bugs::).
+
+'-R, --reentrant, '%option reentrant''
+     instructs flex to generate a reentrant C scanner.  The generated
+     scanner may safely be used in a multi-threaded environment.  The
+     API for a reentrant scanner is different than for a non-reentrant
+     scanner *note Reentrant::).  Because of the API difference between
+     reentrant and non-reentrant 'flex' scanners, non-reentrant flex
+     code must be modified before it is suitable for use with this
+     option.  This option is not compatible with the '--c++' option.
+
+     The option '--reentrant' does not affect the performance of the
+     scanner.
+
+'-+, --c++, '%option c++''
+     specifies that you want flex to generate a C++ scanner class.
+     *Note Cxx::, for details.
+
+'--array, '%option array''
+     specifies that you want yytext to be an array instead of a char*
+
+'--pointer, '%option pointer''
+     specify that 'yytext' should be a 'char *', not an array.  This
+     default is 'char *'.
+
+'-PPREFIX, --prefix=PREFIX, '%option prefix="PREFIX"''
+     changes the default 'yy' prefix used by 'flex' for all
+     globally-visible variable and function names to instead be
+     'PREFIX'.  For example, '--prefix=foo' changes the name of 'yytext'
+     to 'footext'.  It also changes the name of the default output file
+     from 'lex.yy.c' to 'lex.foo.c'.  Here is a partial list of the
+     names affected:
+
+              yy_create_buffer
+              yy_delete_buffer
+              yy_flex_debug
+              yy_init_buffer
+              yy_flush_buffer
+              yy_load_buffer_state
+              yy_switch_to_buffer
+              yyin
+              yyleng
+              yylex
+              yylineno
+              yyout
+              yyrestart
+              yytext
+              yywrap
+              yyalloc
+              yyrealloc
+              yyfree
+
+     (If you are using a C++ scanner, then only 'yywrap' and
+     'yyFlexLexer' are affected.)  Within your scanner itself, you can
+     still refer to the global variables and functions using either
+     version of their name; but externally, they have the modified name.
+
+     This option lets you easily link together multiple 'flex' programs
+     into the same executable.  Note, though, that using this option
+     also renames 'yywrap()', so you now _must_ either provide your own
+     (appropriately-named) version of the routine for your scanner, or
+     use '%option noyywrap', as linking with '-lfl' no longer provides
+     one for you by default.
+
+'--main, '%option main''
+     directs flex to provide a default 'main()' program for the scanner,
+     which simply calls 'yylex()'.  This option implies 'noyywrap' (see
+     below).
+
+'--nounistd, '%option nounistd''
+     suppresses inclusion of the non-ANSI header file 'unistd.h'.  This
+     option is meant to target environments in which 'unistd.h' does not
+     exist.  Be aware that certain options may cause flex to generate
+     code that relies on functions normally found in 'unistd.h', (e.g.
+     'isatty()', 'read()'.)  If you wish to use these functions, you
+     will have to inform your compiler where to find them.  *Note
+     option-always-interactive::.  *Note option-read::.
+
+'--yyclass=NAME, '%option yyclass="NAME"''
+     only applies when generating a C++ scanner (the '--c++' option).
+     It informs 'flex' that you have derived 'NAME' as a subclass of
+     'yyFlexLexer', so 'flex' will place your actions in the member
+     function 'foo::yylex()' instead of 'yyFlexLexer::yylex()'.  It also
+     generates a 'yyFlexLexer::yylex()' member function that emits a
+     run-time error (by invoking 'yyFlexLexer::LexerError())' if called.
+     *Note Cxx::.
+
+
+File: flex.info,  Node: Options for Scanner Speed and Size,  Next: Debugging Options,  Prev: Code-Level And API Options,  Up: Scanner Options
+
+16.4 Options for Scanner Speed and Size
+=======================================
+
+'-C[aefFmr]'
+     controls the degree of table compression and, more generally,
+     trade-offs between small scanners and fast scanners.
+
+     '-C'
+          A lone '-C' specifies that the scanner tables should be
+          compressed but neither equivalence classes nor
+          meta-equivalence classes should be used.
+
+     '-Ca, --align, '%option align''
+          ("align") instructs flex to trade off larger tables in the
+          generated scanner for faster performance because the elements
+          of the tables are better aligned for memory access and
+          computation.  On some RISC architectures, fetching and
+          manipulating longwords is more efficient than with
+          smaller-sized units such as shortwords.  This option can
+          quadruple the size of the tables used by your scanner.
+
+     '-Ce, --ecs, '%option ecs''
+          directs 'flex' to construct "equivalence classes", i.e., sets
+          of characters which have identical lexical properties (for
+          example, if the only appearance of digits in the 'flex' input
+          is in the character class "[0-9]" then the digits '0', '1',
+          ..., '9' will all be put in the same equivalence class).
+          Equivalence classes usually give dramatic reductions in the
+          final table/object file sizes (typically a factor of 2-5) and
+          are pretty cheap performance-wise (one array look-up per
+          character scanned).
+
+     '-Cf'
+          specifies that the "full" scanner tables should be generated -
+          'flex' should not compress the tables by taking advantages of
+          similar transition functions for different states.
+
+     '-CF'
+          specifies that the alternate fast scanner representation
+          (described above under the '--fast' flag) should be used.
+          This option cannot be used with '--c++'.
+
+     '-Cm, --meta-ecs, '%option meta-ecs''
+          directs 'flex' to construct "meta-equivalence classes", which
+          are sets of equivalence classes (or characters, if equivalence
+          classes are not being used) that are commonly used together.
+          Meta-equivalence classes are often a big win when using
+          compressed tables, but they have a moderate performance impact
+          (one or two 'if' tests and one array look-up per character
+          scanned).
+
+     '-Cr, --read, '%option read''
+          causes the generated scanner to _bypass_ use of the standard
+          I/O library ('stdio') for input.  Instead of calling 'fread()'
+          or 'getc()', the scanner will use the 'read()' system call,
+          resulting in a performance gain which varies from system to
+          system, but in general is probably negligible unless you are
+          also using '-Cf' or '-CF'.  Using '-Cr' can cause strange
+          behavior if, for example, you read from 'yyin' using 'stdio'
+          prior to calling the scanner (because the scanner will miss
+          whatever text your previous reads left in the 'stdio' input
+          buffer).  '-Cr' has no effect if you define 'YY_INPUT()'
+          (*note Generated Scanner::).
+
+     The options '-Cf' or '-CF' and '-Cm' do not make sense together -
+     there is no opportunity for meta-equivalence classes if the table
+     is not being compressed.  Otherwise the options may be freely
+     mixed, and are cumulative.
+
+     The default setting is '-Cem', which specifies that 'flex' should
+     generate equivalence classes and meta-equivalence classes.  This
+     setting provides the highest degree of table compression.  You can
+     trade off faster-executing scanners at the cost of larger tables
+     with the following generally being true:
+
+              slowest & smallest
+                    -Cem
+                    -Cm
+                    -Ce
+                    -C
+                    -C{f,F}e
+                    -C{f,F}
+                    -C{f,F}a
+              fastest & largest
+
+     Note that scanners with the smallest tables are usually generated
+     and compiled the quickest, so during development you will usually
+     want to use the default, maximal compression.
+
+     '-Cfe' is often a good compromise between speed and size for
+     production scanners.
+
+'-f, --full, '%option full''
+     specifies "fast scanner".  No table compression is done and 'stdio'
+     is bypassed.  The result is large but fast.  This option is
+     equivalent to '--Cfr'
+
+'-F, --fast, '%option fast''
+     specifies that the _fast_ scanner table representation should be
+     used (and 'stdio' bypassed).  This representation is about as fast
+     as the full table representation '--full', and for some sets of
+     patterns will be considerably smaller (and for others, larger).  In
+     general, if the pattern set contains both _keywords_ and a
+     catch-all, _identifier_ rule, such as in the set:
+
+              "case"    return TOK_CASE;
+              "switch"  return TOK_SWITCH;
+              ...
+              "default" return TOK_DEFAULT;
+              [a-z]+    return TOK_ID;
+
+     then you're better off using the full table representation.  If
+     only the _identifier_ rule is present and you then use a hash table
+     or some such to detect the keywords, you're better off using
+     '--fast'.
+
+     This option is equivalent to '-CFr'.  It cannot be used with
+     '--c++'.
+
+
+File: flex.info,  Node: Debugging Options,  Next: Miscellaneous Options,  Prev: Options for Scanner Speed and Size,  Up: Scanner Options
+
+16.5 Debugging Options
+======================
+
+'-b, --backup, '%option backup''
+     Generate backing-up information to 'lex.backup'.  This is a list of
+     scanner states which require backing up and the input characters on
+     which they do so.  By adding rules one can remove backing-up
+     states.  If _all_ backing-up states are eliminated and '-Cf' or
+     '-CF' is used, the generated scanner will run faster (see the
+     '--perf-report' flag).  Only users who wish to squeeze every last
+     cycle out of their scanners need worry about this option.  (*note
+     Performance::).
+
+'-d, --debug, '%option debug''
+     makes the generated scanner run in "debug" mode.  Whenever a
+     pattern is recognized and the global variable 'yy_flex_debug' is
+     non-zero (which is the default), the scanner will write to 'stderr'
+     a line of the form:
+
+              -accepting rule at line 53 ("the matched text")
+
+     The line number refers to the location of the rule in the file
+     defining the scanner (i.e., the file that was fed to flex).
+     Messages are also generated when the scanner backs up, accepts the
+     default rule, reaches the end of its input buffer (or encounters a
+     NUL; at this point, the two look the same as far as the scanner's
+     concerned), or reaches an end-of-file.
+
+'-p, --perf-report, '%option perf-report''
+     generates a performance report to 'stderr'.  The report consists of
+     comments regarding features of the 'flex' input file which will
+     cause a serious loss of performance in the resulting scanner.  If
+     you give the flag twice, you will also get comments regarding
+     features that lead to minor performance losses.
+
+     Note that the use of 'REJECT', and variable trailing context (*note
+     Limitations::) entails a substantial performance penalty; use of
+     'yymore()', the '^' operator, and the '--interactive' flag entail
+     minor performance penalties.
+
+'-s, --nodefault, '%option nodefault''
+     causes the _default rule_ (that unmatched scanner input is echoed
+     to 'stdout)' to be suppressed.  If the scanner encounters input
+     that does not match any of its rules, it aborts with an error.
+     This option is useful for finding holes in a scanner's rule set.
+
+'-T, --trace, '%option trace''
+     makes 'flex' run in "trace" mode.  It will generate a lot of
+     messages to 'stderr' concerning the form of the input and the
+     resultant non-deterministic and deterministic finite automata.
+     This option is mostly for use in maintaining 'flex'.
+
+'-w, --nowarn, '%option nowarn''
+     suppresses warning messages.
+
+'-v, --verbose, '%option verbose''
+     specifies that 'flex' should write to 'stderr' a summary of
+     statistics regarding the scanner it generates.  Most of the
+     statistics are meaningless to the casual 'flex' user, but the first
+     line identifies the version of 'flex' (same as reported by
+     '--version'), and the next line the flags used when generating the
+     scanner, including those that are on by default.
+
+'--warn, '%option warn''
+     warn about certain things.  In particular, if the default rule can
+     be matched but no default rule has been given, the flex will warn
+     you.  We recommend using this option always.
+
+
+File: flex.info,  Node: Miscellaneous Options,  Prev: Debugging Options,  Up: Scanner Options
+
+16.6 Miscellaneous Options
+==========================
+
+'-c'
+     A do-nothing option included for POSIX compliance.
+
+'-h, -?, --help'
+     generates a "help" summary of 'flex''s options to 'stdout' and then
+     exits.
+
+'-n'
+     Another do-nothing option included for POSIX compliance.
+
+'-V, --version'
+     prints the version number to 'stdout' and exits.
+
+
+File: flex.info,  Node: Performance,  Next: Cxx,  Prev: Scanner Options,  Up: Top
+
+17 Performance Considerations
+*****************************
+
+The main design goal of 'flex' is that it generate high-performance
+scanners.  It has been optimized for dealing well with large sets of
+rules.  Aside from the effects on scanner speed of the table compression
+'-C' options outlined above, there are a number of options/actions which
+degrade performance.  These are, from most expensive to least:
+
+         REJECT
+         arbitrary trailing context
+
+         pattern sets that require backing up
+         %option yylineno
+         %array
+
+         %option interactive
+         %option always-interactive
+
+         ^ beginning-of-line operator
+         yymore()
+
+   with the first two all being quite expensive and the last two being
+quite cheap.  Note also that 'unput()' is implemented as a routine call
+that potentially does quite a bit of work, while 'yyless()' is a
+quite-cheap macro.  So if you are just putting back some excess text you
+scanned, use 'yyless()'.
+
+   'REJECT' should be avoided at all costs when performance is
+important.  It is a particularly expensive option.
+
+   There is one case when '%option yylineno' can be expensive.  That is
+when your patterns match long tokens that could _possibly_ contain a
+newline character.  There is no performance penalty for rules that can
+not possibly match newlines, since flex does not need to check them for
+newlines.  In general, you should avoid rules such as '[^f]+', which
+match very long tokens, including newlines, and may possibly match your
+entire file!  A better approach is to separate '[^f]+' into two rules:
+
+     %option yylineno
+     %%
+         [^f\n]+
+         \n+
+
+   The above scanner does not incur a performance penalty.
+
+   Getting rid of backing up is messy and often may be an enormous
+amount of work for a complicated scanner.  In principal, one begins by
+using the '-b' flag to generate a 'lex.backup' file.  For example, on
+the input:
+
+         %%
+         foo        return TOK_KEYWORD;
+         foobar     return TOK_KEYWORD;
+
+   the file looks like:
+
+         State #6 is non-accepting -
+          associated rule line numbers:
+                2       3
+          out-transitions: [ o ]
+          jam-transitions: EOF [ \001-n  p-\177 ]
+
+         State #8 is non-accepting -
+          associated rule line numbers:
+                3
+          out-transitions: [ a ]
+          jam-transitions: EOF [ \001-`  b-\177 ]
+
+         State #9 is non-accepting -
+          associated rule line numbers:
+                3
+          out-transitions: [ r ]
+          jam-transitions: EOF [ \001-q  s-\177 ]
+
+         Compressed tables always back up.
+
+   The first few lines tell us that there's a scanner state in which it
+can make a transition on an 'o' but not on any other character, and that
+in that state the currently scanned text does not match any rule.  The
+state occurs when trying to match the rules found at lines 2 and 3 in
+the input file.  If the scanner is in that state and then reads
+something other than an 'o', it will have to back up to find a rule
+which is matched.  With a bit of headscratching one can see that this
+must be the state it's in when it has seen 'fo'.  When this has
+happened, if anything other than another 'o' is seen, the scanner will
+have to back up to simply match the 'f' (by the default rule).
+
+   The comment regarding State #8 indicates there's a problem when
+'foob' has been scanned.  Indeed, on any character other than an 'a',
+the scanner will have to back up to accept "foo".  Similarly, the
+comment for State #9 concerns when 'fooba' has been scanned and an 'r'
+does not follow.
+
+   The final comment reminds us that there's no point going to all the
+trouble of removing backing up from the rules unless we're using '-Cf'
+or '-CF', since there's no performance gain doing so with compressed
+scanners.
+
+   The way to remove the backing up is to add "error" rules:
+
+         %%
+         foo         return TOK_KEYWORD;
+         foobar      return TOK_KEYWORD;
+
+         fooba       |
+         foob        |
+         fo          {
+                     /* false alarm, not really a keyword */
+                     return TOK_ID;
+                     }
+
+   Eliminating backing up among a list of keywords can also be done
+using a "catch-all" rule:
+
+         %%
+         foo         return TOK_KEYWORD;
+         foobar      return TOK_KEYWORD;
+
+         [a-z]+      return TOK_ID;
+
+   This is usually the best solution when appropriate.
+
+   Backing up messages tend to cascade.  With a complicated set of rules
+it's not uncommon to get hundreds of messages.  If one can decipher
+them, though, it often only takes a dozen or so rules to eliminate the
+backing up (though it's easy to make a mistake and have an error rule
+accidentally match a valid token.  A possible future 'flex' feature will
+be to automatically add rules to eliminate backing up).
+
+   It's important to keep in mind that you gain the benefits of
+eliminating backing up only if you eliminate _every_ instance of backing
+up.  Leaving just one means you gain nothing.
+
+   _Variable_ trailing context (where both the leading and trailing
+parts do not have a fixed length) entails almost the same performance
+loss as 'REJECT' (i.e., substantial).  So when possible a rule like:
+
+         %%
+         mouse|rat/(cat|dog)   run();
+
+   is better written:
+
+         %%
+         mouse/cat|dog         run();
+         rat/cat|dog           run();
+
+   or as
+
+         %%
+         mouse|rat/cat         run();
+         mouse|rat/dog         run();
+
+   Note that here the special '|' action does _not_ provide any savings,
+and can even make things worse (*note Limitations::).
+
+   Another area where the user can increase a scanner's performance (and
+one that's easier to implement) arises from the fact that the longer the
+tokens matched, the faster the scanner will run.  This is because with
+long tokens the processing of most input characters takes place in the
+(short) inner scanning loop, and does not often have to go through the
+additional work of setting up the scanning environment (e.g., 'yytext')
+for the action.  Recall the scanner for C comments:
+
+         %x comment
+         %%
+                 int line_num = 1;
+
+         "/*"         BEGIN(comment);
+
+         <comment>[^*\n]*
+         <comment>"*"+[^*/\n]*
+         <comment>\n             ++line_num;
+         <comment>"*"+"/"        BEGIN(INITIAL);
+
+   This could be sped up by writing it as:
+
+         %x comment
+         %%
+                 int line_num = 1;
+
+         "/*"         BEGIN(comment);
+
+         <comment>[^*\n]*
+         <comment>[^*\n]*\n      ++line_num;
+         <comment>"*"+[^*/\n]*
+         <comment>"*"+[^*/\n]*\n ++line_num;
+         <comment>"*"+"/"        BEGIN(INITIAL);
+
+   Now instead of each newline requiring the processing of another
+action, recognizing the newlines is distributed over the other rules to
+keep the matched text as long as possible.  Note that _adding_ rules
+does _not_ slow down the scanner!  The speed of the scanner is
+independent of the number of rules or (modulo the considerations given
+at the beginning of this section) how complicated the rules are with
+regard to operators such as '*' and '|'.
+
+   A final example in speeding up a scanner: suppose you want to scan
+through a file containing identifiers and keywords, one per line and
+with no other extraneous characters, and recognize all the keywords.  A
+natural first approach is:
+
+         %%
+         asm      |
+         auto     |
+         break    |
+         ... etc ...
+         volatile |
+         while    /* it's a keyword */
+
+         .|\n     /* it's not a keyword */
+
+   To eliminate the back-tracking, introduce a catch-all rule:
+
+         %%
+         asm      |
+         auto     |
+         break    |
+         ... etc ...
+         volatile |
+         while    /* it's a keyword */
+
+         [a-z]+   |
+         .|\n     /* it's not a keyword */
+
+   Now, if it's guaranteed that there's exactly one word per line, then
+we can reduce the total number of matches by a half by merging in the
+recognition of newlines with that of the other tokens:
+
+         %%
+         asm\n    |
+         auto\n   |
+         break\n  |
+         ... etc ...
+         volatile\n |
+         while\n  /* it's a keyword */
+
+         [a-z]+\n |
+         .|\n     /* it's not a keyword */
+
+   One has to be careful here, as we have now reintroduced backing up
+into the scanner.  In particular, while _we_ know that there will never
+be any characters in the input stream other than letters or newlines,
+'flex' can't figure this out, and it will plan for possibly needing to
+back up when it has scanned a token like 'auto' and then the next
+character is something other than a newline or a letter.  Previously it
+would then just match the 'auto' rule and be done, but now it has no
+'auto' rule, only a 'auto\n' rule.  To eliminate the possibility of
+backing up, we could either duplicate all rules but without final
+newlines, or, since we never expect to encounter such an input and
+therefore don't how it's classified, we can introduce one more catch-all
+rule, this one which doesn't include a newline:
+
+         %%
+         asm\n    |
+         auto\n   |
+         break\n  |
+         ... etc ...
+         volatile\n |
+         while\n  /* it's a keyword */
+
+         [a-z]+\n |
+         [a-z]+   |
+         .|\n     /* it's not a keyword */
+
+   Compiled with '-Cf', this is about as fast as one can get a 'flex'
+scanner to go for this particular problem.
+
+   A final note: 'flex' is slow when matching 'NUL's, particularly when
+a token contains multiple 'NUL's.  It's best to write rules which match
+_short_ amounts of text if it's anticipated that the text will often
+include 'NUL's.
+
+   Another final note regarding performance: as mentioned in *note
+Matching::, dynamically resizing 'yytext' to accommodate huge tokens is
+a slow process because it presently requires that the (huge) token be
+rescanned from the beginning.  Thus if performance is vital, you should
+attempt to match "large" quantities of text but not "huge" quantities,
+where the cutoff between the two is at about 8K characters per token.
+
+
+File: flex.info,  Node: Cxx,  Next: Reentrant,  Prev: Performance,  Up: Top
+
+18 Generating C++ Scanners
+**************************
+
+*IMPORTANT*: the present form of the scanning class is _experimental_
+and may change considerably between major releases.
+
+   'flex' provides two different ways to generate scanners for use with
+C++.  The first way is to simply compile a scanner generated by 'flex'
+using a C++ compiler instead of a C compiler.  You should not encounter
+any compilation errors (*note Reporting Bugs::).  You can then use C++
+code in your rule actions instead of C code.  Note that the default
+input source for your scanner remains 'yyin', and default echoing is
+still done to 'yyout'.  Both of these remain 'FILE *' variables and not
+C++ _streams_.
+
+   You can also use 'flex' to generate a C++ scanner class, using the
+'-+' option (or, equivalently, '%option c++)', which is automatically
+specified if the name of the 'flex' executable ends in a '+', such as
+'flex++'.  When using this option, 'flex' defaults to generating the
+scanner to the file 'lex.yy.cc' instead of 'lex.yy.c'.  The generated
+scanner includes the header file 'FlexLexer.h', which defines the
+interface to two C++ classes.
+
+   The first class in 'FlexLexer.h', 'FlexLexer', provides an abstract
+base class defining the general scanner class interface.  It provides
+the following member functions:
+
+'const char* YYText()'
+     returns the text of the most recently matched token, the equivalent
+     of 'yytext'.
+
+'int YYLeng()'
+     returns the length of the most recently matched token, the
+     equivalent of 'yyleng'.
+
+'int lineno() const'
+     returns the current input line number (see '%option yylineno)', or
+     '1' if '%option yylineno' was not used.
+
+'void set_debug( int flag )'
+     sets the debugging flag for the scanner, equivalent to assigning to
+     'yy_flex_debug' (*note Scanner Options::).  Note that you must
+     build the scanner using '%option debug' to include debugging
+     information in it.
+
+'int debug() const'
+     returns the current setting of the debugging flag.
+
+   Also provided are member functions equivalent to
+'yy_switch_to_buffer()', 'yy_create_buffer()' (though the first argument
+is an 'istream&' object reference and not a 'FILE*)',
+'yy_flush_buffer()', 'yy_delete_buffer()', and 'yyrestart()' (again, the
+first argument is a 'istream&' object reference).
+
+   The second class defined in 'FlexLexer.h' is 'yyFlexLexer', which is
+derived from 'FlexLexer'.  It defines the following additional member
+functions:
+
+'yyFlexLexer( istream* arg_yyin = 0, ostream* arg_yyout = 0 )'
+'yyFlexLexer( istream& arg_yyin, ostream& arg_yyout )'
+     constructs a 'yyFlexLexer' object using the given streams for input
+     and output.  If not specified, the streams default to 'cin' and
+     'cout', respectively.  'yyFlexLexer' does not take ownership of its
+     stream arguments.  It's up to the user to ensure the streams
+     pointed to remain alive at least as long as the 'yyFlexLexer'
+     instance.
+
+'virtual int yylex()'
+     performs the same role is 'yylex()' does for ordinary 'flex'
+     scanners: it scans the input stream, consuming tokens, until a
+     rule's action returns a value.  If you derive a subclass 'S' from
+     'yyFlexLexer' and want to access the member functions and variables
+     of 'S' inside 'yylex()', then you need to use '%option yyclass="S"'
+     to inform 'flex' that you will be using that subclass instead of
+     'yyFlexLexer'.  In this case, rather than generating
+     'yyFlexLexer::yylex()', 'flex' generates 'S::yylex()' (and also
+     generates a dummy 'yyFlexLexer::yylex()' that calls
+     'yyFlexLexer::LexerError()' if called).
+
+'virtual void switch_streams(istream* new_in = 0, ostream* new_out = 0)'
+'virtual void switch_streams(istream& new_in, ostream& new_out)'
+     reassigns 'yyin' to 'new_in' (if non-null) and 'yyout' to 'new_out'
+     (if non-null), deleting the previous input buffer if 'yyin' is
+     reassigned.
+
+'int yylex( istream* new_in, ostream* new_out = 0 )'
+'int yylex( istream& new_in, ostream& new_out )'
+     first switches the input streams via 'switch_streams( new_in,
+     new_out )' and then returns the value of 'yylex()'.
+
+   In addition, 'yyFlexLexer' defines the following protected virtual
+functions which you can redefine in derived classes to tailor the
+scanner:
+
+'virtual int LexerInput( char* buf, int max_size )'
+     reads up to 'max_size' characters into 'buf' and returns the number
+     of characters read.  To indicate end-of-input, return 0 characters.
+     Note that 'interactive' scanners (see the '-B' and '-I' flags in
+     *note Scanner Options::) define the macro 'YY_INTERACTIVE'.  If you
+     redefine 'LexerInput()' and need to take different actions
+     depending on whether or not the scanner might be scanning an
+     interactive input source, you can test for the presence of this
+     name via '#ifdef' statements.
+
+'virtual void LexerOutput( const char* buf, int size )'
+     writes out 'size' characters from the buffer 'buf', which, while
+     'NUL'-terminated, may also contain internal 'NUL's if the scanner's
+     rules can match text with 'NUL's in them.
+
+'virtual void LexerError( const char* msg )'
+     reports a fatal error message.  The default version of this
+     function writes the message to the stream 'cerr' and exits.
+
+   Note that a 'yyFlexLexer' object contains its _entire_ scanning
+state.  Thus you can use such objects to create reentrant scanners, but
+see also *note Reentrant::.  You can instantiate multiple instances of
+the same 'yyFlexLexer' class, and you can also combine multiple C++
+scanner classes together in the same program using the '-P' option
+discussed above.
+
+   Finally, note that the '%array' feature is not available to C++
+scanner classes; you must use '%pointer' (the default).
+
+   Here is an example of a simple C++ scanner:
+
+          // An example of using the flex C++ scanner class.
+
+         %{
+         #include <iostream>
+         using namespace std;
+         int mylineno = 0;
+         %}
+
+         %option noyywrap c++
+
+         string  \"[^\n"]+\"
+
+         ws      [ \t]+
+
+         alpha   [A-Za-z]
+         dig     [0-9]
+         name    ({alpha}|{dig}|\$)({alpha}|{dig}|[_.\-/$])*
+         num1    [-+]?{dig}+\.?([eE][-+]?{dig}+)?
+         num2    [-+]?{dig}*\.{dig}+([eE][-+]?{dig}+)?
+         number  {num1}|{num2}
+
+         %%
+
+         {ws}    /* skip blanks and tabs */
+
+         "/*"    {
+                 int c;
+
+                 while((c = yyinput()) != 0)
+                     {
+                     if(c == '\n')
+                         ++mylineno;
+
+                     else if(c == '*')
+                         {
+                         if((c = yyinput()) == '/')
+                             break;
+                         else
+                             unput(c);
+                         }
+                     }
+                 }
+
+         {number}  cout << "number " << YYText() << '\n';
+
+         \n        mylineno++;
+
+         {name}    cout << "name " << YYText() << '\n';
+
+         {string}  cout << "string " << YYText() << '\n';
+
+         %%
+
+     	// This include is required if main() is an another source file.
+     	//#include <FlexLexer.h>
+
+         int main( int /* argc */, char** /* argv */ )
+         {
+             FlexLexer* lexer = new yyFlexLexer;
+             while(lexer->yylex() != 0)
+                 ;
+             return 0;
+         }
+
+   If you want to create multiple (different) lexer classes, you use the
+'-P' flag (or the 'prefix=' option) to rename each 'yyFlexLexer' to some
+other 'xxFlexLexer'.  You then can include '<FlexLexer.h>' in your other
+sources once per lexer class, first renaming 'yyFlexLexer' as follows:
+
+         #undef yyFlexLexer
+         #define yyFlexLexer xxFlexLexer
+         #include <FlexLexer.h>
+
+         #undef yyFlexLexer
+         #define yyFlexLexer zzFlexLexer
+         #include <FlexLexer.h>
+
+   if, for example, you used '%option prefix="xx"' for one of your
+scanners and '%option prefix="zz"' for the other.
+
+
+File: flex.info,  Node: Reentrant,  Next: Lex and Posix,  Prev: Cxx,  Up: Top
+
+19 Reentrant C Scanners
+***********************
+
+'flex' has the ability to generate a reentrant C scanner.  This is
+accomplished by specifying '%option reentrant' ('-R') The generated
+scanner is both portable, and safe to use in one or more separate
+threads of control.  The most common use for reentrant scanners is from
+within multi-threaded applications.  Any thread may create and execute a
+reentrant 'flex' scanner without the need for synchronization with other
+threads.
+
+* Menu:
+
+* Reentrant Uses::              
+* Reentrant Overview::          
+* Reentrant Example::           
+* Reentrant Detail::            
+* Reentrant Functions::         
+
+
+File: flex.info,  Node: Reentrant Uses,  Next: Reentrant Overview,  Prev: Reentrant,  Up: Reentrant
+
+19.1 Uses for Reentrant Scanners
+================================
+
+However, there are other uses for a reentrant scanner.  For example, you
+could scan two or more files simultaneously to implement a 'diff' at the
+token level (i.e., instead of at the character level):
+
+         /* Example of maintaining more than one active scanner. */
+
+         do {
+             int tok1, tok2;
+
+             tok1 = yylex( scanner_1 );
+             tok2 = yylex( scanner_2 );
+
+             if( tok1 != tok2 )
+                 printf("Files are different.");
+
+        } while ( tok1 && tok2 );
+
+   Another use for a reentrant scanner is recursion.  (Note that a
+recursive scanner can also be created using a non-reentrant scanner and
+buffer states.  *Note Multiple Input Buffers::.)
+
+   The following crude scanner supports the 'eval' command by invoking
+another instance of itself.
+
+         /* Example of recursive invocation. */
+
+         %option reentrant
+
+         %%
+         "eval(".+")"  {
+                           yyscan_t scanner;
+                           YY_BUFFER_STATE buf;
+
+                           yylex_init( &scanner );
+                           yytext[yyleng-1] = ' ';
+
+                           buf = yy_scan_string( yytext + 5, scanner );
+                           yylex( scanner );
+
+                           yy_delete_buffer(buf,scanner);
+                           yylex_destroy( scanner );
+                      }
+         ...
+         %%
+
+
+File: flex.info,  Node: Reentrant Overview,  Next: Reentrant Example,  Prev: Reentrant Uses,  Up: Reentrant
+
+19.2 An Overview of the Reentrant API
+=====================================
+
+The API for reentrant scanners is different than for non-reentrant
+scanners.  Here is a quick overview of the API:
+
+     '%option reentrant' must be specified.
+
+   * All functions take one additional argument: 'yyscanner'
+
+   * All global variables are replaced by their macro equivalents.  (We
+     tell you this because it may be important to you during debugging.)
+
+   * 'yylex_init' and 'yylex_destroy' must be called before and after
+     'yylex', respectively.
+
+   * Accessor methods (get/set functions) provide access to common
+     'flex' variables.
+
+   * User-specific data can be stored in 'yyextra'.
+
+
+File: flex.info,  Node: Reentrant Example,  Next: Reentrant Detail,  Prev: Reentrant Overview,  Up: Reentrant
+
+19.3 Reentrant Example
+======================
+
+First, an example of a reentrant scanner:
+         /* This scanner prints "//" comments. */
+
+         %option reentrant stack noyywrap
+         %x COMMENT
+
+         %%
+
+         "//"                 yy_push_state( COMMENT, yyscanner);
+         .|\n
+
+         <COMMENT>\n          yy_pop_state( yyscanner );
+         <COMMENT>[^\n]+      fprintf( yyout, "%s\n", yytext);
+
+         %%
+
+         int main ( int argc, char * argv[] )
+         {
+             yyscan_t scanner;
+
+             yylex_init ( &scanner );
+             yylex ( scanner );
+             yylex_destroy ( scanner );
+         return 0;
+        }
+
+
+File: flex.info,  Node: Reentrant Detail,  Next: Reentrant Functions,  Prev: Reentrant Example,  Up: Reentrant
+
+19.4 The Reentrant API in Detail
+================================
+
+Here are the things you need to do or know to use the reentrant C API of
+'flex'.
+
+* Menu:
+
+* Specify Reentrant::           
+* Extra Reentrant Argument::    
+* Global Replacement::          
+* Init and Destroy Functions::  
+* Accessor Methods::            
+* Extra Data::                  
+* About yyscan_t::              
+
+
+File: flex.info,  Node: Specify Reentrant,  Next: Extra Reentrant Argument,  Prev: Reentrant Detail,  Up: Reentrant Detail
+
+19.4.1 Declaring a Scanner As Reentrant
+---------------------------------------
+
+%option reentrant (-reentrant) must be specified.
+
+   Notice that '%option reentrant' is specified in the above example
+(*note Reentrant Example::.  Had this option not been specified, 'flex'
+would have happily generated a non-reentrant scanner without
+complaining.  You may explicitly specify '%option noreentrant', if you
+do _not_ want a reentrant scanner, although it is not necessary.  The
+default is to generate a non-reentrant scanner.
+
+
+File: flex.info,  Node: Extra Reentrant Argument,  Next: Global Replacement,  Prev: Specify Reentrant,  Up: Reentrant Detail
+
+19.4.2 The Extra Argument
+-------------------------
+
+All functions take one additional argument: 'yyscanner'.
+
+   Notice that the calls to 'yy_push_state' and 'yy_pop_state' both have
+an argument, 'yyscanner' , that is not present in a non-reentrant
+scanner.  Here are the declarations of 'yy_push_state' and
+'yy_pop_state' in the reentrant scanner:
+
+         static void yy_push_state  ( int new_state , yyscan_t yyscanner ) ;
+         static void yy_pop_state  ( yyscan_t yyscanner  ) ;
+
+   Notice that the argument 'yyscanner' appears in the declaration of
+both functions.  In fact, all 'flex' functions in a reentrant scanner
+have this additional argument.  It is always the last argument in the
+argument list, it is always of type 'yyscan_t' (which is typedef'd to
+'void *') and it is always named 'yyscanner'.  As you may have guessed,
+'yyscanner' is a pointer to an opaque data structure encapsulating the
+current state of the scanner.  For a list of function declarations, see
+*note Reentrant Functions::.  Note that preprocessor macros, such as
+'BEGIN', 'ECHO', and 'REJECT', do not take this additional argument.
+
+
+File: flex.info,  Node: Global Replacement,  Next: Init and Destroy Functions,  Prev: Extra Reentrant Argument,  Up: Reentrant Detail
+
+19.4.3 Global Variables Replaced By Macros
+------------------------------------------
+
+All global variables in traditional flex have been replaced by macro
+equivalents.
+
+   Note that in the above example, 'yyout' and 'yytext' are not plain
+variables.  These are macros that will expand to their equivalent
+lvalue.  All of the familiar 'flex' globals have been replaced by their
+macro equivalents.  In particular, 'yytext', 'yyleng', 'yylineno',
+'yyin', 'yyout', 'yyextra', 'yylval', and 'yylloc' are macros.  You may
+safely use these macros in actions as if they were plain variables.  We
+only tell you this so you don't expect to link to these variables
+externally.  Currently, each macro expands to a member of an internal
+struct, e.g.,
+
+     #define yytext (((struct yyguts_t*)yyscanner)->yytext_r)
+
+   One important thing to remember about 'yytext' and friends is that
+'yytext' is not a global variable in a reentrant scanner, you can not
+access it directly from outside an action or from other functions.  You
+must use an accessor method, e.g., 'yyget_text', to accomplish this.
+(See below).
+
+
+File: flex.info,  Node: Init and Destroy Functions,  Next: Accessor Methods,  Prev: Global Replacement,  Up: Reentrant Detail
+
+19.4.4 Init and Destroy Functions
+---------------------------------
+
+'yylex_init' and 'yylex_destroy' must be called before and after
+'yylex', respectively.
+
+         int yylex_init ( yyscan_t * ptr_yy_globals ) ;
+         int yylex_init_extra ( YY_EXTRA_TYPE user_defined, yyscan_t * ptr_yy_globals ) ;
+         int yylex ( yyscan_t yyscanner ) ;
+         int yylex_destroy ( yyscan_t yyscanner ) ;
+
+   The function 'yylex_init' must be called before calling any other
+function.  The argument to 'yylex_init' is the address of an
+uninitialized pointer to be filled in by 'yylex_init', overwriting any
+previous contents.  The function 'yylex_init_extra' may be used instead,
+taking as its first argument a variable of type 'YY_EXTRA_TYPE'.  See
+the section on yyextra, below, for more details.
+
+   The value stored in 'ptr_yy_globals' should thereafter be passed to
+'yylex' and 'yylex_destroy'.  Flex does not save the argument passed to
+'yylex_init', so it is safe to pass the address of a local pointer to
+'yylex_init' so long as it remains in scope for the duration of all
+calls to the scanner, up to and including the call to 'yylex_destroy'.
+
+   The function 'yylex' should be familiar to you by now.  The reentrant
+version takes one argument, which is the value returned (via an
+argument) by 'yylex_init'.  Otherwise, it behaves the same as the
+non-reentrant version of 'yylex'.
+
+   Both 'yylex_init' and 'yylex_init_extra' returns 0 (zero) on success,
+or non-zero on failure, in which case errno is set to one of the
+following values:
+
+   * ENOMEM Memory allocation error.  *Note memory-management::.
+   * EINVAL Invalid argument.
+
+   The function 'yylex_destroy' should be called to free resources used
+by the scanner.  After 'yylex_destroy' is called, the contents of
+'yyscanner' should not be used.  Of course, there is no need to destroy
+a scanner if you plan to reuse it.  A 'flex' scanner (both reentrant and
+non-reentrant) may be restarted by calling 'yyrestart'.
+
+   Below is an example of a program that creates a scanner, uses it,
+then destroys it when done:
+
+         int main ()
+         {
+             yyscan_t scanner;
+             int tok;
+
+             yylex_init(&scanner);
+
+             while ((tok=yylex(scanner)) > 0)
+                 printf("tok=%d  yytext=%s\n", tok, yyget_text(scanner));
+
+             yylex_destroy(scanner);
+             return 0;
+         }
+
+
+File: flex.info,  Node: Accessor Methods,  Next: Extra Data,  Prev: Init and Destroy Functions,  Up: Reentrant Detail
+
+19.4.5 Accessing Variables with Reentrant Scanners
+--------------------------------------------------
+
+Accessor methods (get/set functions) provide access to common 'flex'
+variables.
+
+   Many scanners that you build will be part of a larger project.
+Portions of your project will need access to 'flex' values, such as
+'yytext'.  In a non-reentrant scanner, these values are global, so there
+is no problem accessing them.  However, in a reentrant scanner, there
+are no global 'flex' values.  You can not access them directly.
+Instead, you must access 'flex' values using accessor methods (get/set
+functions).  Each accessor method is named 'yyget_NAME' or 'yyset_NAME',
+where 'NAME' is the name of the 'flex' variable you want.  For example:
+
+         /* Set the last character of yytext to NULL. */
+         void chop ( yyscan_t scanner )
+         {
+             int len = yyget_leng( scanner );
+             yyget_text( scanner )[len - 1] = '\0';
+         }
+
+   The above code may be called from within an action like this:
+
+         %%
+         .+\n    { chop( yyscanner );}
+
+   You may find that '%option header-file' is particularly useful for
+generating prototypes of all the accessor functions.  *Note
+option-header::.
+
+
+File: flex.info,  Node: Extra Data,  Next: About yyscan_t,  Prev: Accessor Methods,  Up: Reentrant Detail
+
+19.4.6 Extra Data
+-----------------
+
+User-specific data can be stored in 'yyextra'.
+
+   In a reentrant scanner, it is unwise to use global variables to
+communicate with or maintain state between different pieces of your
+program.  However, you may need access to external data or invoke
+external functions from within the scanner actions.  Likewise, you may
+need to pass information to your scanner (e.g., open file descriptors,
+or database connections).  In a non-reentrant scanner, the only way to
+do this would be through the use of global variables.  'Flex' allows you
+to store arbitrary, "extra" data in a scanner.  This data is accessible
+through the accessor methods 'yyget_extra' and 'yyset_extra' from
+outside the scanner, and through the shortcut macro 'yyextra' from
+within the scanner itself.  They are defined as follows:
+
+         #define YY_EXTRA_TYPE  void*
+         YY_EXTRA_TYPE  yyget_extra ( yyscan_t scanner );
+         void           yyset_extra ( YY_EXTRA_TYPE arbitrary_data , yyscan_t scanner);
+
+   In addition, an extra form of 'yylex_init' is provided,
+'yylex_init_extra'.  This function is provided so that the yyextra value
+can be accessed from within the very first yyalloc, used to allocate the
+scanner itself.
+
+   By default, 'YY_EXTRA_TYPE' is defined as type 'void *'.  You may
+redefine this type using '%option extra-type="your_type"' in the
+scanner:
+
+         /* An example of overriding YY_EXTRA_TYPE. */
+         %{
+         #include <sys/stat.h>
+         #include <unistd.h>
+         %}
+         %option reentrant
+         %option extra-type="struct stat *"
+         %%
+
+         __filesize__     printf( "%ld", yyextra->st_size  );
+         __lastmod__      printf( "%ld", yyextra->st_mtime );
+         %%
+         void scan_file( char* filename )
+         {
+             yyscan_t scanner;
+             struct stat buf;
+             FILE *in;
+
+             in = fopen( filename, "r" );
+             stat( filename, &buf );
+
+             yylex_init_extra( buf, &scanner );
+             yyset_in( in, scanner );
+             yylex( scanner );
+             yylex_destroy( scanner );
+
+             fclose( in );
+        }
+
+
+File: flex.info,  Node: About yyscan_t,  Prev: Extra Data,  Up: Reentrant Detail
+
+19.4.7 About yyscan_t
+---------------------
+
+'yyscan_t' is defined as:
+
+          typedef void* yyscan_t;
+
+   It is initialized by 'yylex_init()' to point to an internal
+structure.  You should never access this value directly.  In particular,
+you should never attempt to free it (use 'yylex_destroy()' instead.)
+
+
+File: flex.info,  Node: Reentrant Functions,  Prev: Reentrant Detail,  Up: Reentrant
+
+19.5 Functions and Macros Available in Reentrant C Scanners
+===========================================================
+
+The following Functions are available in a reentrant scanner:
+
+         char *yyget_text ( yyscan_t scanner );
+         int yyget_leng ( yyscan_t scanner );
+         FILE *yyget_in ( yyscan_t scanner );
+         FILE *yyget_out ( yyscan_t scanner );
+         int yyget_lineno ( yyscan_t scanner );
+         YY_EXTRA_TYPE yyget_extra ( yyscan_t scanner );
+         int  yyget_debug ( yyscan_t scanner );
+
+         void yyset_debug ( int flag, yyscan_t scanner );
+         void yyset_in  ( FILE * in_str , yyscan_t scanner );
+         void yyset_out  ( FILE * out_str , yyscan_t scanner );
+         void yyset_lineno ( int line_number , yyscan_t scanner );
+         void yyset_extra ( YY_EXTRA_TYPE user_defined , yyscan_t scanner );
+
+   There are no "set" functions for yytext and yyleng.  This is
+intentional.
+
+   The following Macro shortcuts are available in actions in a reentrant
+scanner:
+
+         yytext
+         yyleng
+         yyin
+         yyout
+         yylineno
+         yyextra
+         yy_flex_debug
+
+   In a reentrant C scanner, support for yylineno is always present
+(i.e., you may access yylineno), but the value is never modified by
+'flex' unless '%option yylineno' is enabled.  This is to allow the user
+to maintain the line count independently of 'flex'.
+
+   The following functions and macros are made available when '%option
+bison-bridge' ('--bison-bridge') is specified:
+
+         YYSTYPE * yyget_lval ( yyscan_t scanner );
+         void yyset_lval ( YYSTYPE * yylvalp , yyscan_t scanner );
+         yylval
+
+   The following functions and macros are made available when '%option
+bison-locations' ('--bison-locations') is specified:
+
+         YYLTYPE *yyget_lloc ( yyscan_t scanner );
+         void yyset_lloc ( YYLTYPE * yyllocp , yyscan_t scanner );
+         yylloc
+
+   Support for yylval assumes that 'YYSTYPE' is a valid type.  Support
+for yylloc assumes that 'YYSLYPE' is a valid type.  Typically, these
+types are generated by 'bison', and are included in section 1 of the
+'flex' input.
+
+
+File: flex.info,  Node: Lex and Posix,  Next: Memory Management,  Prev: Reentrant,  Up: Top
+
+20 Incompatibilities with Lex and Posix
+***************************************
+
+'flex' is a rewrite of the AT&T Unix _lex_ tool (the two implementations
+do not share any code, though), with some extensions and
+incompatibilities, both of which are of concern to those who wish to
+write scanners acceptable to both implementations.  'flex' is fully
+compliant with the POSIX 'lex' specification, except that when using
+'%pointer' (the default), a call to 'unput()' destroys the contents of
+'yytext', which is counter to the POSIX specification.  In this section
+we discuss all of the known areas of incompatibility between 'flex',
+AT&T 'lex', and the POSIX specification.  'flex''s '-l' option turns on
+maximum compatibility with the original AT&T 'lex' implementation, at
+the cost of a major loss in the generated scanner's performance.  We
+note below which incompatibilities can be overcome using the '-l'
+option.  'flex' is fully compatible with 'lex' with the following
+exceptions:
+
+   * The undocumented 'lex' scanner internal variable 'yylineno' is not
+     supported unless '-l' or '%option yylineno' is used.
+
+   * 'yylineno' should be maintained on a per-buffer basis, rather than
+     a per-scanner (single global variable) basis.
+
+   * 'yylineno' is not part of the POSIX specification.
+
+   * The 'input()' routine is not redefinable, though it may be called
+     to read characters following whatever has been matched by a rule.
+     If 'input()' encounters an end-of-file the normal 'yywrap()'
+     processing is done.  A "real" end-of-file is returned by 'input()'
+     as 'EOF'.
+
+   * Input is instead controlled by defining the 'YY_INPUT()' macro.
+
+   * The 'flex' restriction that 'input()' cannot be redefined is in
+     accordance with the POSIX specification, which simply does not
+     specify any way of controlling the scanner's input other than by
+     making an initial assignment to 'yyin'.
+
+   * The 'unput()' routine is not redefinable.  This restriction is in
+     accordance with POSIX.
+
+   * 'flex' scanners are not as reentrant as 'lex' scanners.  In
+     particular, if you have an interactive scanner and an interrupt
+     handler which long-jumps out of the scanner, and the scanner is
+     subsequently called again, you may get the following message:
+
+              fatal flex scanner internal error--end of buffer missed
+
+     To reenter the scanner, first use:
+
+              yyrestart( yyin );
+
+     Note that this call will throw away any buffered input; usually
+     this isn't a problem with an interactive scanner.  *Note
+     Reentrant::, for 'flex''s reentrant API.
+
+   * Also note that 'flex' C++ scanner classes _are_ reentrant, so if
+     using C++ is an option for you, you should use them instead.  *Note
+     Cxx::, and *note Reentrant:: for details.
+
+   * 'output()' is not supported.  Output from the ECHO macro is done to
+     the file-pointer 'yyout' (default 'stdout)'.
+
+   * 'output()' is not part of the POSIX specification.
+
+   * 'lex' does not support exclusive start conditions (%x), though they
+     are in the POSIX specification.
+
+   * When definitions are expanded, 'flex' encloses them in parentheses.
+     With 'lex', the following:
+
+              NAME    [A-Z][A-Z0-9]*
+              %%
+              foo{NAME}?      printf( "Found it\n" );
+              %%
+
+     will not match the string 'foo' because when the macro is expanded
+     the rule is equivalent to 'foo[A-Z][A-Z0-9]*?' and the precedence
+     is such that the '?' is associated with '[A-Z0-9]*'.  With 'flex',
+     the rule will be expanded to 'foo([A-Z][A-Z0-9]*)?' and so the
+     string 'foo' will match.
+
+   * Note that if the definition begins with '^' or ends with '$' then
+     it is _not_ expanded with parentheses, to allow these operators to
+     appear in definitions without losing their special meanings.  But
+     the '<s>', '/', and '<<EOF>>' operators cannot be used in a 'flex'
+     definition.
+
+   * Using '-l' results in the 'lex' behavior of no parentheses around
+     the definition.
+
+   * The POSIX specification is that the definition be enclosed in
+     parentheses.
+
+   * Some implementations of 'lex' allow a rule's action to begin on a
+     separate line, if the rule's pattern has trailing whitespace:
+
+              %%
+              foo|bar<space here>
+                { foobar_action();}
+
+     'flex' does not support this feature.
+
+   * The 'lex' '%r' (generate a Ratfor scanner) option is not supported.
+     It is not part of the POSIX specification.
+
+   * After a call to 'unput()', _yytext_ is undefined until the next
+     token is matched, unless the scanner was built using '%array'.
+     This is not the case with 'lex' or the POSIX specification.  The
+     '-l' option does away with this incompatibility.
+
+   * The precedence of the '{,}' (numeric range) operator is different.
+     The AT&T and POSIX specifications of 'lex' interpret 'abc{1,3}' as
+     match one, two, or three occurrences of 'abc'", whereas 'flex'
+     interprets it as "match 'ab' followed by one, two, or three
+     occurrences of 'c'".  The '-l' and '--posix' options do away with
+     this incompatibility.
+
+   * The precedence of the '^' operator is different.  'lex' interprets
+     '^foo|bar' as "match either 'foo' at the beginning of a line, or
+     'bar' anywhere", whereas 'flex' interprets it as "match either
+     'foo' or 'bar' if they come at the beginning of a line".  The
+     latter is in agreement with the POSIX specification.
+
+   * The special table-size declarations such as '%a' supported by 'lex'
+     are not required by 'flex' scanners..  'flex' ignores them.
+   * The name 'FLEX_SCANNER' is '#define''d so scanners may be written
+     for use with either 'flex' or 'lex'.  Scanners also include
+     'YY_FLEX_MAJOR_VERSION', 'YY_FLEX_MINOR_VERSION' and
+     'YY_FLEX_SUBMINOR_VERSION' indicating which version of 'flex'
+     generated the scanner.  For example, for the 2.5.22 release, these
+     defines would be 2, 5 and 22 respectively.  If the version of
+     'flex' being used is a beta version, then the symbol 'FLEX_BETA' is
+     defined.
+
+   * The symbols '[[' and ']]' in the code sections of the input may
+     conflict with the m4 delimiters.  *Note M4 Dependency::.
+
+   The following 'flex' features are not included in 'lex' or the POSIX
+specification:
+
+   * C++ scanners
+   * %option
+   * start condition scopes
+   * start condition stacks
+   * interactive/non-interactive scanners
+   * yy_scan_string() and friends
+   * yyterminate()
+   * yy_set_interactive()
+   * yy_set_bol()
+   * YY_AT_BOL() <<EOF>>
+   * <*>
+   * YY_DECL
+   * YY_START
+   * YY_USER_ACTION
+   * YY_USER_INIT
+   * #line directives
+   * %{}'s around actions
+   * reentrant C API
+   * multiple actions on a line
+   * almost all of the 'flex' command-line options
+
+   The feature "multiple actions on a line" refers to the fact that with
+'flex' you can put multiple actions on the same line, separated with
+semi-colons, while with 'lex', the following:
+
+         foo    handle_foo(); ++num_foos_seen;
+
+   is (rather surprisingly) truncated to
+
+         foo    handle_foo();
+
+   'flex' does not truncate the action.  Actions that are not enclosed
+in braces are simply terminated at the end of the line.
+
+
+File: flex.info,  Node: Memory Management,  Next: Serialized Tables,  Prev: Lex and Posix,  Up: Top
+
+21 Memory Management
+********************
+
+This chapter describes how flex handles dynamic memory, and how you can
+override the default behavior.
+
+* Menu:
+
+* The Default Memory Management::  
+* Overriding The Default Memory Management::  
+* A Note About yytext And Memory::  
+
+
+File: flex.info,  Node: The Default Memory Management,  Next: Overriding The Default Memory Management,  Prev: Memory Management,  Up: Memory Management
+
+21.1 The Default Memory Management
+==================================
+
+Flex allocates dynamic memory during initialization, and once in a while
+from within a call to yylex().  Initialization takes place during the
+first call to yylex().  Thereafter, flex may reallocate more memory if
+it needs to enlarge a buffer.  As of version 2.5.9 Flex will clean up
+all memory when you call 'yylex_destroy' *Note faq-memory-leak::.
+
+   Flex allocates dynamic memory for four purposes, listed below (1)
+
+16kB for the input buffer.
+     Flex allocates memory for the character buffer used to perform
+     pattern matching.  Flex must read ahead from the input stream and
+     store it in a large character buffer.  This buffer is typically the
+     largest chunk of dynamic memory flex consumes.  This buffer will
+     grow if necessary, doubling the size each time.  Flex frees this
+     memory when you call yylex_destroy().  The default size of this
+     buffer (16384 bytes) is almost always too large.  The ideal size
+     for this buffer is the length of the longest token expected, in
+     bytes, plus a little more.  Flex will allocate a few extra bytes
+     for housekeeping.  Currently, to override the size of the input
+     buffer you must '#define YY_BUF_SIZE' to whatever number of bytes
+     you want.  We don't plan to change this in the near future, but we
+     reserve the right to do so if we ever add a more robust memory
+     management API.
+
+64kb for the REJECT state. This will only be allocated if you use REJECT.
+     The size is large enough to hold the same number of states as
+     characters in the input buffer.  If you override the size of the
+     input buffer (via 'YY_BUF_SIZE'), then you automatically override
+     the size of this buffer as well.
+
+100 bytes for the start condition stack.
+     Flex allocates memory for the start condition stack.  This is the
+     stack used for pushing start states, i.e., with yy_push_state().
+     It will grow if necessary.  Since the states are simply integers,
+     this stack doesn't consume much memory.  This stack is not present
+     if '%option stack' is not specified.  You will rarely need to tune
+     this buffer.  The ideal size for this stack is the maximum depth
+     expected.  The memory for this stack is automatically destroyed
+     when you call yylex_destroy().  *Note option-stack::.
+
+40 bytes for each YY_BUFFER_STATE.
+     Flex allocates memory for each YY_BUFFER_STATE. The buffer state
+     itself is about 40 bytes, plus an additional large character buffer
+     (described above.)  The initial buffer state is created during
+     initialization, and with each call to yy_create_buffer().  You
+     can't tune the size of this, but you can tune the character buffer
+     as described above.  Any buffer state that you explicitly create by
+     calling yy_create_buffer() is _NOT_ destroyed automatically.  You
+     must call yy_delete_buffer() to free the memory.  The exception to
+     this rule is that flex will delete the current buffer automatically
+     when you call yylex_destroy().  If you delete the current buffer,
+     be sure to set it to NULL. That way, flex will not try to delete
+     the buffer a second time (possibly crashing your program!)  At the
+     time of this writing, flex does not provide a growable stack for
+     the buffer states.  You have to manage that yourself.  *Note
+     Multiple Input Buffers::.
+
+84 bytes for the reentrant scanner guts
+     Flex allocates about 84 bytes for the reentrant scanner structure
+     when you call yylex_init().  It is destroyed when the user calls
+     yylex_destroy().
+
+   ---------- Footnotes ----------
+
+   (1) The quantities given here are approximate, and may vary due to
+host architecture, compiler configuration, or due to future enhancements
+to flex.
+
+
+File: flex.info,  Node: Overriding The Default Memory Management,  Next: A Note About yytext And Memory,  Prev: The Default Memory Management,  Up: Memory Management
+
+21.2 Overriding The Default Memory Management
+=============================================
+
+Flex calls the functions 'yyalloc', 'yyrealloc', and 'yyfree' when it
+needs to allocate or free memory.  By default, these functions are
+wrappers around the standard C functions, 'malloc', 'realloc', and
+'free', respectively.  You can override the default implementations by
+telling flex that you will provide your own implementations.
+
+   To override the default implementations, you must do two things:
+
+  1. Suppress the default implementations by specifying one or more of
+     the following options:
+
+        * '%option noyyalloc'
+        * '%option noyyrealloc'
+        * '%option noyyfree'.
+
+  2. Provide your own implementation of the following functions: (1)
+
+          // For a non-reentrant scanner
+          void * yyalloc (size_t bytes);
+          void * yyrealloc (void * ptr, size_t bytes);
+          void   yyfree (void * ptr);
+
+          // For a reentrant scanner
+          void * yyalloc (size_t bytes, void * yyscanner);
+          void * yyrealloc (void * ptr, size_t bytes, void * yyscanner);
+          void   yyfree (void * ptr, void * yyscanner);
+
+   In the following example, we will override all three memory routines.
+We assume that there is a custom allocator with garbage collection.  In
+order to make this example interesting, we will use a reentrant scanner,
+passing a pointer to the custom allocator through 'yyextra'.
+
+     %{
+     #include "some_allocator.h"
+     %}
+
+     /* Suppress the default implementations. */
+     %option noyyalloc noyyrealloc noyyfree
+     %option reentrant
+
+     /* Initialize the allocator. */
+     %{
+     #define YY_EXTRA_TYPE  struct allocator*
+     #define YY_USER_INIT  yyextra = allocator_create();
+     %}
+
+     %%
+     .|\n   ;
+     %%
+
+     /* Provide our own implementations. */
+     void * yyalloc (size_t bytes, void* yyscanner) {
+         return allocator_alloc (yyextra, bytes);
+     }
+
+     void * yyrealloc (void * ptr, size_t bytes, void* yyscanner) {
+         return allocator_realloc (yyextra, bytes);
+     }
+
+     void yyfree (void * ptr, void * yyscanner) {
+         /* Do nothing -- we leave it to the garbage collector. */
+     }
+
+
+   ---------- Footnotes ----------
+
+   (1) It is not necessary to override all (or any) of the memory
+management routines.  You may, for example, override 'yyrealloc', but
+not 'yyfree' or 'yyalloc'.
+
+
+File: flex.info,  Node: A Note About yytext And Memory,  Prev: Overriding The Default Memory Management,  Up: Memory Management
+
+21.3 A Note About yytext And Memory
+===================================
+
+When flex finds a match, 'yytext' points to the first character of the
+match in the input buffer.  The string itself is part of the input
+buffer, and is _NOT_ allocated separately.  The value of yytext will be
+overwritten the next time yylex() is called.  In short, the value of
+yytext is only valid from within the matched rule's action.
+
+   Often, you want the value of yytext to persist for later processing,
+i.e., by a parser with non-zero lookahead.  In order to preserve yytext,
+you will have to copy it with strdup() or a similar function.  But this
+introduces some headache because your parser is now responsible for
+freeing the copy of yytext.  If you use a yacc or bison parser,
+(commonly used with flex), you will discover that the error recovery
+mechanisms can cause memory to be leaked.
+
+   To prevent memory leaks from strdup'd yytext, you will have to track
+the memory somehow.  Our experience has shown that a garbage collection
+mechanism or a pooled memory mechanism will save you a lot of grief when
+writing parsers.
+
+
+File: flex.info,  Node: Serialized Tables,  Next: Diagnostics,  Prev: Memory Management,  Up: Top
+
+22 Serialized Tables
+********************
+
+A 'flex' scanner has the ability to save the DFA tables to a file, and
+load them at runtime when needed.  The motivation for this feature is to
+reduce the runtime memory footprint.  Traditionally, these tables have
+been compiled into the scanner as C arrays, and are sometimes quite
+large.  Since the tables are compiled into the scanner, the memory used
+by the tables can never be freed.  This is a waste of memory, especially
+if an application uses several scanners, but none of them at the same
+time.
+
+   The serialization feature allows the tables to be loaded at runtime,
+before scanning begins.  The tables may be discarded when scanning is
+finished.
+
+* Menu:
+
+* Creating Serialized Tables::  
+* Loading and Unloading Serialized Tables::  
+* Tables File Format::          
+
+
+File: flex.info,  Node: Creating Serialized Tables,  Next: Loading and Unloading Serialized Tables,  Prev: Serialized Tables,  Up: Serialized Tables
+
+22.1 Creating Serialized Tables
+===============================
+
+You may create a scanner with serialized tables by specifying:
+
+         %option tables-file=FILE
+     or
+         --tables-file=FILE
+
+   These options instruct flex to save the DFA tables to the file FILE.
+The tables will _not_ be embedded in the generated scanner.  The scanner
+will not function on its own.  The scanner will be dependent upon the
+serialized tables.  You must load the tables from this file at runtime
+before you can scan anything.
+
+   If you do not specify a filename to '--tables-file', the tables will
+be saved to 'lex.yy.tables', where 'yy' is the appropriate prefix.
+
+   If your project uses several different scanners, you can concatenate
+the serialized tables into one file, and flex will find the correct set
+of tables, using the scanner prefix as part of the lookup key.  An
+example follows:
+
+     $ flex --tables-file --prefix=cpp cpp.l
+     $ flex --tables-file --prefix=c   c.l
+     $ cat lex.cpp.tables lex.c.tables  >  all.tables
+
+   The above example created two scanners, 'cpp', and 'c'.  Since we did
+not specify a filename, the tables were serialized to 'lex.c.tables' and
+'lex.cpp.tables', respectively.  Then, we concatenated the two files
+together into 'all.tables', which we will distribute with our project.
+At runtime, we will open the file and tell flex to load the tables from
+it.  Flex will find the correct tables automatically.  (See next
+section).
+
+
+File: flex.info,  Node: Loading and Unloading Serialized Tables,  Next: Tables File Format,  Prev: Creating Serialized Tables,  Up: Serialized Tables
+
+22.2 Loading and Unloading Serialized Tables
+============================================
+
+If you've built your scanner with '%option tables-file', then you must
+load the scanner tables at runtime.  This can be accomplished with the
+following function:
+
+ -- Function: int yytables_fload (FILE* FP [, yyscan_t SCANNER])
+     Locates scanner tables in the stream pointed to by FP and loads
+     them.  Memory for the tables is allocated via 'yyalloc'.  You must
+     call this function before the first call to 'yylex'.  The argument
+     SCANNER only appears in the reentrant scanner.  This function
+     returns '0' (zero) on success, or non-zero on error.
+
+   The loaded tables are *not* automatically destroyed (unloaded) when
+you call 'yylex_destroy'.  The reason is that you may create several
+scanners of the same type (in a reentrant scanner), each of which needs
+access to these tables.  To avoid a nasty memory leak, you must call the
+following function:
+
+ -- Function: int yytables_destroy ([yyscan_t SCANNER])
+     Unloads the scanner tables.  The tables must be loaded again before
+     you can scan any more data.  The argument SCANNER only appears in
+     the reentrant scanner.  This function returns '0' (zero) on
+     success, or non-zero on error.
+
+   *The functions 'yytables_fload' and 'yytables_destroy' are not
+thread-safe.*  You must ensure that these functions are called exactly
+once (for each scanner type) in a threaded program, before any thread
+calls 'yylex'.  After the tables are loaded, they are never written to,
+and no thread protection is required thereafter - until you destroy
+them.
+
+
+File: flex.info,  Node: Tables File Format,  Prev: Loading and Unloading Serialized Tables,  Up: Serialized Tables
+
+22.3 Tables File Format
+=======================
+
+This section defines the file format of serialized 'flex' tables.
+
+   The tables format allows for one or more sets of tables to be
+specified, where each set corresponds to a given scanner.  Scanners are
+indexed by name, as described below.  The file format is as follows:
+
+                      TABLE SET 1
+                     +-------------------------------+
+             Header  | uint32          th_magic;     |
+                     | uint32          th_hsize;     |
+                     | uint32          th_ssize;     |
+                     | uint16          th_flags;     |
+                     | char            th_version[]; |
+                     | char            th_name[];    |
+                     | uint8           th_pad64[];   |
+                     +-------------------------------+
+             Table 1 | uint16          td_id;        |
+                     | uint16          td_flags;     |
+                     | uint32          td_hilen;     |
+                     | uint32          td_lolen;     |
+                     | void            td_data[];    |
+                     | uint8           td_pad64[];   |
+                     +-------------------------------+
+             Table 2 |                               |
+                .    .                               .
+                .    .                               .
+                .    .                               .
+                .    .                               .
+             Table n |                               |
+                     +-------------------------------+
+                      TABLE SET 2
+                           .
+                           .
+                           .
+                      TABLE SET N
+
+   The above diagram shows that a complete set of tables consists of a
+header followed by multiple individual tables.  Furthermore, multiple
+complete sets may be present in the same file, each set with its own
+header and tables.  The sets are contiguous in the file.  The only way
+to know if another set follows is to check the next four bytes for the
+magic number (or check for EOF). The header and tables sections are
+padded to 64-bit boundaries.  Below we describe each field in detail.
+This format does not specify how the scanner will expand the given data,
+i.e., data may be serialized as int8, but expanded to an int32 array at
+runtime.  This is to reduce the size of the serialized data where
+possible.  Remember, _all integer values are in network byte order_.
+
+Fields of a table header:
+
+'th_magic'
+     Magic number, always 0xF13C57B1.
+
+'th_hsize'
+     Size of this entire header, in bytes, including all fields plus any
+     padding.
+
+'th_ssize'
+     Size of this entire set, in bytes, including the header, all
+     tables, plus any padding.
+
+'th_flags'
+     Bit flags for this table set.  Currently unused.
+
+'th_version[]'
+     Flex version in NULL-terminated string format.  e.g., '2.5.13a'.
+     This is the version of flex that was used to create the serialized
+     tables.
+
+'th_name[]'
+     Contains the name of this table set.  The default is 'yytables',
+     and is prefixed accordingly, e.g., 'footables'.  Must be
+     NULL-terminated.
+
+'th_pad64[]'
+     Zero or more NULL bytes, padding the entire header to the next
+     64-bit boundary as calculated from the beginning of the header.
+
+Fields of a table:
+
+'td_id'
+     Specifies the table identifier.  Possible values are:
+     'YYTD_ID_ACCEPT (0x01)'
+          'yy_accept'
+     'YYTD_ID_BASE (0x02)'
+          'yy_base'
+     'YYTD_ID_CHK (0x03)'
+          'yy_chk'
+     'YYTD_ID_DEF (0x04)'
+          'yy_def'
+     'YYTD_ID_EC (0x05)'
+          'yy_ec '
+     'YYTD_ID_META (0x06)'
+          'yy_meta'
+     'YYTD_ID_NUL_TRANS (0x07)'
+          'yy_NUL_trans'
+     'YYTD_ID_NXT (0x08)'
+          'yy_nxt'.  This array may be two dimensional.  See the
+          'td_hilen' field below.
+     'YYTD_ID_RULE_CAN_MATCH_EOL (0x09)'
+          'yy_rule_can_match_eol'
+     'YYTD_ID_START_STATE_LIST (0x0A)'
+          'yy_start_state_list'.  This array is handled specially
+          because it is an array of pointers to structs.  See the
+          'td_flags' field below.
+     'YYTD_ID_TRANSITION (0x0B)'
+          'yy_transition'.  This array is handled specially because it
+          is an array of structs.  See the 'td_lolen' field below.
+     'YYTD_ID_ACCLIST (0x0C)'
+          'yy_acclist'
+
+'td_flags'
+     Bit flags describing how to interpret the data in 'td_data'.  The
+     data arrays are one-dimensional by default, but may be two
+     dimensional as specified in the 'td_hilen' field.
+
+     'YYTD_DATA8 (0x01)'
+          The data is serialized as an array of type int8.
+     'YYTD_DATA16 (0x02)'
+          The data is serialized as an array of type int16.
+     'YYTD_DATA32 (0x04)'
+          The data is serialized as an array of type int32.
+     'YYTD_PTRANS (0x08)'
+          The data is a list of indexes of entries in the expanded
+          'yy_transition' array.  Each index should be expanded to a
+          pointer to the corresponding entry in the 'yy_transition'
+          array.  We count on the fact that the 'yy_transition' array
+          has already been seen.
+     'YYTD_STRUCT (0x10)'
+          The data is a list of yy_trans_info structs, each of which
+          consists of two integers.  There is no padding between struct
+          elements or between structs.  The type of each member is
+          determined by the 'YYTD_DATA*' bits.
+
+'td_hilen'
+     If 'td_hilen' is non-zero, then the data is a two-dimensional
+     array.  Otherwise, the data is a one-dimensional array.  'td_hilen'
+     contains the number of elements in the higher dimensional array,
+     and 'td_lolen' contains the number of elements in the lowest
+     dimension.
+
+     Conceptually, 'td_data' is either 'sometype td_data[td_lolen]', or
+     'sometype td_data[td_hilen][td_lolen]', where 'sometype' is
+     specified by the 'td_flags' field.  It is possible for both
+     'td_lolen' and 'td_hilen' to be zero, in which case 'td_data' is a
+     zero length array, and no data is loaded, i.e., this table is
+     simply skipped.  Flex does not currently generate tables of zero
+     length.
+
+'td_lolen'
+     Specifies the number of elements in the lowest dimension array.  If
+     this is a one-dimensional array, then it is simply the number of
+     elements in this array.  The element size is determined by the
+     'td_flags' field.
+
+'td_data[]'
+     The table data.  This array may be a one- or two-dimensional array,
+     of type 'int8', 'int16', 'int32', 'struct yy_trans_info', or
+     'struct yy_trans_info*', depending upon the values in the
+     'td_flags', 'td_hilen', and 'td_lolen' fields.
+
+'td_pad64[]'
+     Zero or more NULL bytes, padding the entire table to the next
+     64-bit boundary as calculated from the beginning of this table.
+
+
+File: flex.info,  Node: Diagnostics,  Next: Limitations,  Prev: Serialized Tables,  Up: Top
+
+23 Diagnostics
+**************
+
+The following is a list of 'flex' diagnostic messages:
+
+   * 'warning, rule cannot be matched' indicates that the given rule
+     cannot be matched because it follows other rules that will always
+     match the same text as it.  For example, in the following 'foo'
+     cannot be matched because it comes after an identifier "catch-all"
+     rule:
+
+              [a-z]+    got_identifier();
+              foo       got_foo();
+
+     Using 'REJECT' in a scanner suppresses this warning.
+
+   * 'warning, -s option given but default rule can be matched' means
+     that it is possible (perhaps only in a particular start condition)
+     that the default rule (match any single character) is the only one
+     that will match a particular input.  Since '-s' was given,
+     presumably this is not intended.
+
+   * 'reject_used_but_not_detected undefined' or
+     'yymore_used_but_not_detected undefined'.  These errors can occur
+     at compile time.  They indicate that the scanner uses 'REJECT' or
+     'yymore()' but that 'flex' failed to notice the fact, meaning that
+     'flex' scanned the first two sections looking for occurrences of
+     these actions and failed to find any, but somehow you snuck some in
+     (via a #include file, for example).  Use '%option reject' or
+     '%option yymore' to indicate to 'flex' that you really do use these
+     features.
+
+   * 'flex scanner jammed'.  a scanner compiled with '-s' has
+     encountered an input string which wasn't matched by any of its
+     rules.  This error can also occur due to internal problems.
+
+   * 'token too large, exceeds YYLMAX'.  your scanner uses '%array' and
+     one of its rules matched a string longer than the 'YYLMAX' constant
+     (8K bytes by default).  You can increase the value by #define'ing
+     'YYLMAX' in the definitions section of your 'flex' input.
+
+   * 'scanner requires -8 flag to use the character 'x''.  Your scanner
+     specification includes recognizing the 8-bit character ''x'' and
+     you did not specify the -8 flag, and your scanner defaulted to
+     7-bit because you used the '-Cf' or '-CF' table compression
+     options.  See the discussion of the '-7' flag, *note Scanner
+     Options::, for details.
+
+   * 'flex scanner push-back overflow'.  you used 'unput()' to push back
+     so much text that the scanner's buffer could not hold both the
+     pushed-back text and the current token in 'yytext'.  Ideally the
+     scanner should dynamically resize the buffer in this case, but at
+     present it does not.
+
+   * 'input buffer overflow, can't enlarge buffer because scanner uses
+     REJECT'.  the scanner was working on matching an extremely large
+     token and needed to expand the input buffer.  This doesn't work
+     with scanners that use 'REJECT'.
+
+   * 'fatal flex scanner internal error--end of buffer missed'.  This
+     can occur in a scanner which is reentered after a long-jump has
+     jumped out (or over) the scanner's activation frame.  Before
+     reentering the scanner, use:
+              yyrestart( yyin );
+     or, as noted above, switch to using the C++ scanner class.
+
+   * 'too many start conditions in <> construct!' you listed more start
+     conditions in a <> construct than exist (so you must have listed at
+     least one of them twice).
+
+
+File: flex.info,  Node: Limitations,  Next: Bibliography,  Prev: Diagnostics,  Up: Top
+
+24 Limitations
+**************
+
+Some trailing context patterns cannot be properly matched and generate
+warning messages ('dangerous trailing context').  These are patterns
+where the ending of the first part of the rule matches the beginning of
+the second part, such as 'zx*/xy*', where the 'x*' matches the 'x' at
+the beginning of the trailing context.  (Note that the POSIX draft
+states that the text matched by such patterns is undefined.)  For some
+trailing context rules, parts which are actually fixed-length are not
+recognized as such, leading to the abovementioned performance loss.  In
+particular, parts using '|' or '{n}' (such as 'foo{3}') are always
+considered variable-length.  Combining trailing context with the special
+'|' action can result in _fixed_ trailing context being turned into the
+more expensive _variable_ trailing context.  For example, in the
+following:
+
+         %%
+         abc      |
+         xyz/def
+
+   Use of 'unput()' invalidates yytext and yyleng, unless the '%array'
+directive or the '-l' option has been used.  Pattern-matching of 'NUL's
+is substantially slower than matching other characters.  Dynamic
+resizing of the input buffer is slow, as it entails rescanning all the
+text matched so far by the current (generally huge) token.  Due to both
+buffering of input and read-ahead, you cannot intermix calls to
+'<stdio.h>' routines, such as, getchar(), with 'flex' rules and expect
+it to work.  Call 'input()' instead.  The total table entries listed by
+the '-v' flag excludes the number of table entries needed to determine
+what rule has been matched.  The number of entries is equal to the
+number of DFA states if the scanner does not use 'REJECT', and somewhat
+greater than the number of states if it does.  'REJECT' cannot be used
+with the '-f' or '-F' options.
+
+   The 'flex' internal algorithms need documentation.
+
+
+File: flex.info,  Node: Bibliography,  Next: FAQ,  Prev: Limitations,  Up: Top
+
+25 Additional Reading
+*********************
+
+You may wish to read more about the following programs:
+   * lex
+   * yacc
+   * sed
+   * awk
+
+   The following books may contain material of interest:
+
+   John Levine, Tony Mason, and Doug Brown, _Lex & Yacc_, O'Reilly and
+Associates.  Be sure to get the 2nd edition.
+
+   M. E. Lesk and E. Schmidt, _LEX - Lexical Analyzer Generator_
+
+   Alfred Aho, Ravi Sethi and Jeffrey Ullman, _Compilers: Principles,
+Techniques and Tools_, Addison-Wesley (1986).  Describes the
+pattern-matching techniques used by 'flex' (deterministic finite
+automata).
+
+
+File: flex.info,  Node: FAQ,  Next: Appendices,  Prev: Bibliography,  Up: Top
+
+FAQ
+***
+
+From time to time, the 'flex' maintainer receives certain questions.
+Rather than repeat answers to well-understood problems, we publish them
+here.
+
+* Menu:
+
+* When was flex born?::         
+* How do I expand backslash-escape sequences in C-style quoted strings?::  
+* Why do flex scanners call fileno if it is not ANSI compatible?::  
+* Does flex support recursive pattern definitions?::  
+* How do I skip huge chunks of input (tens of megabytes) while using flex?::  
+* Flex is not matching my patterns in the same order that I defined them.::  
+* My actions are executing out of order or sometimes not at all.::  
+* How can I have multiple input sources feed into the same scanner at the same time?::  
+* Can I build nested parsers that work with the same input file?::  
+* How can I match text only at the end of a file?::  
+* How can I make REJECT cascade across start condition boundaries?::  
+* Why cant I use fast or full tables with interactive mode?::  
+* How much faster is -F or -f than -C?::  
+* If I have a simple grammar cant I just parse it with flex?::  
+* Why doesn't yyrestart() set the start state back to INITIAL?::  
+* How can I match C-style comments?::  
+* The period isn't working the way I expected.::  
+* Can I get the flex manual in another format?::  
+* Does there exist a "faster" NDFA->DFA algorithm?::  
+* How does flex compile the DFA so quickly?::  
+* How can I use more than 8192 rules?::  
+* How do I abandon a file in the middle of a scan and switch to a new file?::  
+* How do I execute code only during initialization (only before the first scan)?::  
+* How do I execute code at termination?::  
+* Where else can I find help?::  
+* Can I include comments in the "rules" section of the file?::  
+* I get an error about undefined yywrap().::  
+* How can I change the matching pattern at run time?::  
+* How can I expand macros in the input?::  
+* How can I build a two-pass scanner?::  
+* How do I match any string not matched in the preceding rules?::  
+* I am trying to port code from AT&T lex that uses yysptr and yysbuf.::  
+* Is there a way to make flex treat NULL like a regular character?::  
+* Whenever flex can not match the input it says "flex scanner jammed".::  
+* Why doesn't flex have non-greedy operators like perl does?::  
+* Memory leak - 16386 bytes allocated by malloc.::  
+* How do I track the byte offset for lseek()?::  
+* How do I use my own I/O classes in a C++ scanner?::  
+* How do I skip as many chars as possible?::  
+* deleteme00::              
+* Are certain equivalent patterns faster than others?::              
+* Is backing up a big deal?::              
+* Can I fake multi-byte character support?::              
+* deleteme01::              
+* Can you discuss some flex internals?::              
+* unput() messes up yy_at_bol::              
+* The | operator is not doing what I want::              
+* Why can't flex understand this variable trailing context pattern?::              
+* The ^ operator isn't working::              
+* Trailing context is getting confused with trailing optional patterns::              
+* Is flex GNU or not?::              
+* ERASEME53::              
+* I need to scan if-then-else blocks and while loops::              
+* ERASEME55::              
+* ERASEME56::              
+* ERASEME57::              
+* Is there a repository for flex scanners?::              
+* How can I conditionally compile or preprocess my flex input file?::              
+* Where can I find grammars for lex and yacc?::              
+* I get an end-of-buffer message for each character scanned.::              
+* unnamed-faq-62::              
+* unnamed-faq-63::              
+* unnamed-faq-64::              
+* unnamed-faq-65::              
+* unnamed-faq-66::              
+* unnamed-faq-67::              
+* unnamed-faq-68::              
+* unnamed-faq-69::              
+* unnamed-faq-70::              
+* unnamed-faq-71::              
+* unnamed-faq-72::              
+* unnamed-faq-73::              
+* unnamed-faq-74::              
+* unnamed-faq-75::              
+* unnamed-faq-76::              
+* unnamed-faq-77::              
+* unnamed-faq-78::              
+* unnamed-faq-79::              
+* unnamed-faq-80::              
+* unnamed-faq-81::              
+* unnamed-faq-82::              
+* unnamed-faq-83::              
+* unnamed-faq-84::              
+* unnamed-faq-85::              
+* unnamed-faq-86::              
+* unnamed-faq-87::              
+* unnamed-faq-88::              
+* unnamed-faq-90::              
+* unnamed-faq-91::              
+* unnamed-faq-92::              
+* unnamed-faq-93::              
+* unnamed-faq-94::              
+* unnamed-faq-95::              
+* unnamed-faq-96::              
+* unnamed-faq-97::              
+* unnamed-faq-98::              
+* unnamed-faq-99::              
+* unnamed-faq-100::             
+* unnamed-faq-101::             
+* What is the difference between YYLEX_PARAM and YY_DECL?::
+* Why do I get "conflicting types for yylex" error?::
+* How do I access the values set in a Flex action from within a Bison action?::
+
+
+File: flex.info,  Node: When was flex born?,  Next: How do I expand backslash-escape sequences in C-style quoted strings?,  Up: FAQ
+
+When was flex born?
+===================
+
+Vern Paxson took over the 'Software Tools' lex project from Jef
+Poskanzer in 1982.  At that point it was written in Ratfor.  Around 1987
+or so, Paxson translated it into C, and a legend was born :-).
+
+
+File: flex.info,  Node: How do I expand backslash-escape sequences in C-style quoted strings?,  Next: Why do flex scanners call fileno if it is not ANSI compatible?,  Prev: When was flex born?,  Up: FAQ
+
+How do I expand backslash-escape sequences in C-style quoted strings?
+=====================================================================
+
+A key point when scanning quoted strings is that you cannot (easily)
+write a single rule that will precisely match the string if you allow
+things like embedded escape sequences and newlines.  If you try to match
+strings with a single rule then you'll wind up having to rescan the
+string anyway to find any escape sequences.
+
+   Instead you can use exclusive start conditions and a set of rules,
+one for matching non-escaped text, one for matching a single escape, one
+for matching an embedded newline, and one for recognizing the end of the
+string.  Each of these rules is then faced with the question of where to
+put its intermediary results.  The best solution is for the rules to
+append their local value of 'yytext' to the end of a "string literal"
+buffer.  A rule like the escape-matcher will append to the buffer the
+meaning of the escape sequence rather than the literal text in 'yytext'.
+In this way, 'yytext' does not need to be modified at all.
+
+
+File: flex.info,  Node: Why do flex scanners call fileno if it is not ANSI compatible?,  Next: Does flex support recursive pattern definitions?,  Prev: How do I expand backslash-escape sequences in C-style quoted strings?,  Up: FAQ
+
+Why do flex scanners call fileno if it is not ANSI compatible?
+==============================================================
+
+Flex scanners call 'fileno()' in order to get the file descriptor
+corresponding to 'yyin'.  The file descriptor may be passed to
+'isatty()' or 'read()', depending upon which '%options' you specified.
+If your system does not have 'fileno()' support, to get rid of the
+'read()' call, do not specify '%option read'.  To get rid of the
+'isatty()' call, you must specify one of '%option always-interactive' or
+'%option never-interactive'.
+
+
+File: flex.info,  Node: Does flex support recursive pattern definitions?,  Next: How do I skip huge chunks of input (tens of megabytes) while using flex?,  Prev: Why do flex scanners call fileno if it is not ANSI compatible?,  Up: FAQ
+
+Does flex support recursive pattern definitions?
+================================================
+
+e.g.,
+
+     %%
+     block   "{"({block}|{statement})*"}"
+
+   No.  You cannot have recursive definitions.  The pattern-matching
+power of regular expressions in general (and therefore flex scanners,
+too) is limited.  In particular, regular expressions cannot "balance"
+parentheses to an arbitrary degree.  For example, it's impossible to
+write a regular expression that matches all strings containing the same
+number of '{'s as '}'s.  For more powerful pattern matching, you need a
+parser, such as 'GNU bison'.
+
+
+File: flex.info,  Node: How do I skip huge chunks of input (tens of megabytes) while using flex?,  Next: Flex is not matching my patterns in the same order that I defined them.,  Prev: Does flex support recursive pattern definitions?,  Up: FAQ
+
+How do I skip huge chunks of input (tens of megabytes) while using flex?
+========================================================================
+
+Use 'fseek()' (or 'lseek()') to position yyin, then call 'yyrestart()'.
+
+
+File: flex.info,  Node: Flex is not matching my patterns in the same order that I defined them.,  Next: My actions are executing out of order or sometimes not at all.,  Prev: How do I skip huge chunks of input (tens of megabytes) while using flex?,  Up: FAQ
+
+Flex is not matching my patterns in the same order that I defined them.
+=======================================================================
+
+'flex' picks the rule that matches the most text (i.e., the longest
+possible input string).  This is because 'flex' uses an entirely
+different matching technique ("deterministic finite automata") that
+actually does all of the matching simultaneously, in parallel.  (Seems
+impossible, but it's actually a fairly simple technique once you
+understand the principles.)
+
+   A side-effect of this parallel matching is that when the input
+matches more than one rule, 'flex' scanners pick the rule that matched
+the _most_ text.  This is explained further in the manual, in the
+section *Note Matching::.
+
+   If you want 'flex' to choose a shorter match, then you can work
+around this behavior by expanding your short rule to match more text,
+then put back the extra:
+
+     data_.*        yyless( 5 ); BEGIN BLOCKIDSTATE;
+
+   Another fix would be to make the second rule active only during the
+'<BLOCKIDSTATE>' start condition, and make that start condition
+exclusive by declaring it with '%x' instead of '%s'.
+
+   A final fix is to change the input language so that the ambiguity for
+'data_' is removed, by adding characters to it that don't match the
+identifier rule, or by removing characters (such as '_') from the
+identifier rule so it no longer matches 'data_'.  (Of course, you might
+also not have the option of changing the input language.)
+
+
+File: flex.info,  Node: My actions are executing out of order or sometimes not at all.,  Next: How can I have multiple input sources feed into the same scanner at the same time?,  Prev: Flex is not matching my patterns in the same order that I defined them.,  Up: FAQ
+
+My actions are executing out of order or sometimes not at all.
+==============================================================
+
+Most likely, you have (in error) placed the opening '{' of the action
+block on a different line than the rule, e.g.,
+
+     ^(foo|bar)
+     {  <<<--- WRONG!
+
+     }
+
+   'flex' requires that the opening '{' of an action associated with a
+rule begin on the same line as does the rule.  You need instead to write
+your rules as follows:
+
+     ^(foo|bar)   {  // CORRECT!
+
+     }
+
+
+File: flex.info,  Node: How can I have multiple input sources feed into the same scanner at the same time?,  Next: Can I build nested parsers that work with the same input file?,  Prev: My actions are executing out of order or sometimes not at all.,  Up: FAQ
+
+How can I have multiple input sources feed into the same scanner at the same time?
+==================================================================================
+
+If ...
+   * your scanner is free of backtracking (verified using 'flex''s '-b'
+     flag),
+   * AND you run your scanner interactively ('-I' option; default unless
+     using special table compression options),
+   * AND you feed it one character at a time by redefining 'YY_INPUT' to
+     do so,
+
+   then every time it matches a token, it will have exhausted its input
+buffer (because the scanner is free of backtracking).  This means you
+can safely use 'select()' at the point and only call 'yylex()' for
+another token if 'select()' indicates there's data available.
+
+   That is, move the 'select()' out from the input function to a point
+where it determines whether 'yylex()' gets called for the next token.
+
+   With this approach, you will still have problems if your input can
+arrive piecemeal; 'select()' could inform you that the beginning of a
+token is available, you call 'yylex()' to get it, but it winds up
+blocking waiting for the later characters in the token.
+
+   Here's another way: Move your input multiplexing inside of
+'YY_INPUT'.  That is, whenever 'YY_INPUT' is called, it 'select()''s to
+see where input is available.  If input is available for the scanner, it
+reads and returns the next byte.  If input is available from another
+source, it calls whatever function is responsible for reading from that
+source.  (If no input is available, it blocks until some input is
+available.)  I've used this technique in an interpreter I wrote that
+both reads keyboard input using a 'flex' scanner and IPC traffic from
+sockets, and it works fine.
+
+
+File: flex.info,  Node: Can I build nested parsers that work with the same input file?,  Next: How can I match text only at the end of a file?,  Prev: How can I have multiple input sources feed into the same scanner at the same time?,  Up: FAQ
+
+Can I build nested parsers that work with the same input file?
+==============================================================
+
+This is not going to work without some additional effort.  The reason is
+that 'flex' block-buffers the input it reads from 'yyin'.  This means
+that the "outermost" 'yylex()', when called, will automatically slurp up
+the first 8K of input available on yyin, and subsequent calls to other
+'yylex()''s won't see that input.  You might be tempted to work around
+this problem by redefining 'YY_INPUT' to only return a small amount of
+text, but it turns out that that approach is quite difficult.  Instead,
+the best solution is to combine all of your scanners into one large
+scanner, using a different exclusive start condition for each.
+
+
+File: flex.info,  Node: How can I match text only at the end of a file?,  Next: How can I make REJECT cascade across start condition boundaries?,  Prev: Can I build nested parsers that work with the same input file?,  Up: FAQ
+
+How can I match text only at the end of a file?
+===============================================
+
+There is no way to write a rule which is "match this text, but only if
+it comes at the end of the file".  You can fake it, though, if you
+happen to have a character lying around that you don't allow in your
+input.  Then you redefine 'YY_INPUT' to call your own routine which, if
+it sees an 'EOF', returns the magic character first (and remembers to
+return a real 'EOF' next time it's called).  Then you could write:
+
+     <COMMENT>(.|\n)*{EOF_CHAR}    /* saw comment at EOF */
+
+
+File: flex.info,  Node: How can I make REJECT cascade across start condition boundaries?,  Next: Why cant I use fast or full tables with interactive mode?,  Prev: How can I match text only at the end of a file?,  Up: FAQ
+
+How can I make REJECT cascade across start condition boundaries?
+================================================================
+
+You can do this as follows.  Suppose you have a start condition 'A', and
+after exhausting all of the possible matches in '<A>', you want to try
+matches in '<INITIAL>'.  Then you could use the following:
+
+     %x A
+     %%
+     <A>rule_that_is_long    ...; REJECT;
+     <A>rule                 ...; REJECT; /* shorter rule */
+     <A>etc.
+     ...
+     <A>.|\n  {
+     /* Shortest and last rule in <A>, so
+     * cascaded REJECTs will eventually
+     * wind up matching this rule.  We want
+     * to now switch to the initial state
+     * and try matching from there instead.
+     */
+     yyless(0);    /* put back matched text */
+     BEGIN(INITIAL);
+     }
+
+
+File: flex.info,  Node: Why cant I use fast or full tables with interactive mode?,  Next: How much faster is -F or -f than -C?,  Prev: How can I make REJECT cascade across start condition boundaries?,  Up: FAQ
+
+Why can't I use fast or full tables with interactive mode?
+==========================================================
+
+One of the assumptions flex makes is that interactive applications are
+inherently slow (they're waiting on a human after all).  It has to do
+with how the scanner detects that it must be finished scanning a token.
+For interactive scanners, after scanning each character the current
+state is looked up in a table (essentially) to see whether there's a
+chance of another input character possibly extending the length of the
+match.  If not, the scanner halts.  For non-interactive scanners, the
+end-of-token test is much simpler, basically a compare with 0, so no
+memory bus cycles.  Since the test occurs in the innermost scanning
+loop, one would like to make it go as fast as possible.
+
+   Still, it seems reasonable to allow the user to choose to trade off a
+bit of performance in this area to gain the corresponding flexibility.
+There might be another reason, though, why fast scanners don't support
+the interactive option.
+
+
+File: flex.info,  Node: How much faster is -F or -f than -C?,  Next: If I have a simple grammar cant I just parse it with flex?,  Prev: Why cant I use fast or full tables with interactive mode?,  Up: FAQ
+
+How much faster is -F or -f than -C?
+====================================
+
+Much faster (factor of 2-3).
+
+
+File: flex.info,  Node: If I have a simple grammar cant I just parse it with flex?,  Next: Why doesn't yyrestart() set the start state back to INITIAL?,  Prev: How much faster is -F or -f than -C?,  Up: FAQ
+
+If I have a simple grammar can't I just parse it with flex?
+===========================================================
+
+Is your grammar recursive?  That's almost always a sign that you're
+better off using a parser/scanner rather than just trying to use a
+scanner alone.
+
+
+File: flex.info,  Node: Why doesn't yyrestart() set the start state back to INITIAL?,  Next: How can I match C-style comments?,  Prev: If I have a simple grammar cant I just parse it with flex?,  Up: FAQ
+
+Why doesn't yyrestart() set the start state back to INITIAL?
+============================================================
+
+There are two reasons.  The first is that there might be programs that
+rely on the start state not changing across file changes.  The second is
+that beginning with 'flex' version 2.4, use of 'yyrestart()' is no
+longer required, so fixing the problem there doesn't solve the more
+general problem.
+
+
+File: flex.info,  Node: How can I match C-style comments?,  Next: The period isn't working the way I expected.,  Prev: Why doesn't yyrestart() set the start state back to INITIAL?,  Up: FAQ
+
+How can I match C-style comments?
+=================================
+
+You might be tempted to try something like this:
+
+     "/*".*"*/"       // WRONG!
+
+   or, worse, this:
+
+     "/*"(.|\n)"*/"   // WRONG!
+
+   The above rules will eat too much input, and blow up on things like:
+
+     /* a comment */ do_my_thing( "oops */" );
+
+   Here is one way which allows you to track line information:
+
+     <INITIAL>{
+     "/*"              BEGIN(IN_COMMENT);
+     }
+     <IN_COMMENT>{
+     "*/"      BEGIN(INITIAL);
+     [^*\n]+   // eat comment in chunks
+     "*"       // eat the lone star
+     \n        yylineno++;
+     }
+
+
+File: flex.info,  Node: The period isn't working the way I expected.,  Next: Can I get the flex manual in another format?,  Prev: How can I match C-style comments?,  Up: FAQ
+
+The '.' isn't working the way I expected.
+=========================================
+
+Here are some tips for using '.':
+
+   * A common mistake is to place the grouping parenthesis AFTER an
+     operator, when you really meant to place the parenthesis BEFORE the
+     operator, e.g., you probably want this '(foo|bar)+' and NOT this
+     '(foo|bar+)'.
+
+     The first pattern matches the words 'foo' or 'bar' any number of
+     times, e.g., it matches the text 'barfoofoobarfoo'.  The second
+     pattern matches a single instance of 'foo' or a single instance of
+     'bar' followed by one or more 'r's, e.g., it matches the text
+     'barrrr' .
+   * A '.' inside '[]''s just means a literal'.' (period), and NOT "any
+     character except newline".
+   * Remember that '.' matches any character EXCEPT '\n' (and 'EOF').
+     If you really want to match ANY character, including newlines, then
+     use '(.|\n)' Beware that the regex '(.|\n)+' will match your entire
+     input!
+   * Finally, if you want to match a literal '.' (a period), then use
+     '[.]' or '"."'
+
+
+File: flex.info,  Node: Can I get the flex manual in another format?,  Next: Does there exist a "faster" NDFA->DFA algorithm?,  Prev: The period isn't working the way I expected.,  Up: FAQ
+
+Can I get the flex manual in another format?
+============================================
+
+The 'flex' source distribution includes a texinfo manual.  You are free
+to convert that texinfo into whatever format you desire.  The 'texinfo'
+package includes tools for conversion to a number of formats.
+
+
+File: flex.info,  Node: Does there exist a "faster" NDFA->DFA algorithm?,  Next: How does flex compile the DFA so quickly?,  Prev: Can I get the flex manual in another format?,  Up: FAQ
+
+Does there exist a "faster" NDFA->DFA algorithm?
+================================================
+
+There's no way around the potential exponential running time - it can
+take you exponential time just to enumerate all of the DFA states.  In
+practice, though, the running time is closer to linear, or sometimes
+quadratic.
+
+
+File: flex.info,  Node: How does flex compile the DFA so quickly?,  Next: How can I use more than 8192 rules?,  Prev: Does there exist a "faster" NDFA->DFA algorithm?,  Up: FAQ
+
+How does flex compile the DFA so quickly?
+=========================================
+
+There are two big speed wins that 'flex' uses:
+
+  1. It analyzes the input rules to construct equivalence classes for
+     those characters that always make the same transitions.  It then
+     rewrites the NFA using equivalence classes for transitions instead
+     of characters.  This cuts down the NFA->DFA computation time
+     dramatically, to the point where, for uncompressed DFA tables, the
+     DFA generation is often I/O bound in writing out the tables.
+  2. It maintains hash values for previously computed DFA states, so
+     testing whether a newly constructed DFA state is equivalent to a
+     previously constructed state can be done very quickly, by first
+     comparing hash values.
+
+
+File: flex.info,  Node: How can I use more than 8192 rules?,  Next: How do I abandon a file in the middle of a scan and switch to a new file?,  Prev: How does flex compile the DFA so quickly?,  Up: FAQ
+
+How can I use more than 8192 rules?
+===================================
+
+'Flex' is compiled with an upper limit of 8192 rules per scanner.  If
+you need more than 8192 rules in your scanner, you'll have to recompile
+'flex' with the following changes in 'flexdef.h':
+
+     <    #define YY_TRAILING_MASK 0x2000
+     <    #define YY_TRAILING_HEAD_MASK 0x4000
+     --
+     >    #define YY_TRAILING_MASK 0x20000000
+     >    #define YY_TRAILING_HEAD_MASK 0x40000000
+
+   This should work okay as long as your C compiler uses 32 bit
+integers.  But you might want to think about whether using such a huge
+number of rules is the best way to solve your problem.
+
+   The following may also be relevant:
+
+   With luck, you should be able to increase the definitions in
+flexdef.h for:
+
+     #define JAMSTATE -32766 /* marks a reference to the state that always jams */
+     #define MAXIMUM_MNS 31999
+     #define BAD_SUBSCRIPT -32767
+
+   recompile everything, and it'll all work.  Flex only has these
+16-bit-like values built into it because a long time ago it was
+developed on a machine with 16-bit ints.  I've given this advice to
+others in the past but haven't heard back from them whether it worked
+okay or not...
+
+
+File: flex.info,  Node: How do I abandon a file in the middle of a scan and switch to a new file?,  Next: How do I execute code only during initialization (only before the first scan)?,  Prev: How can I use more than 8192 rules?,  Up: FAQ
+
+How do I abandon a file in the middle of a scan and switch to a new file?
+=========================================================================
+
+Just call 'yyrestart(newfile)'.  Be sure to reset the start state if you
+want a "fresh start, since 'yyrestart' does NOT reset the start state
+back to 'INITIAL'.
+
+
+File: flex.info,  Node: How do I execute code only during initialization (only before the first scan)?,  Next: How do I execute code at termination?,  Prev: How do I abandon a file in the middle of a scan and switch to a new file?,  Up: FAQ
+
+How do I execute code only during initialization (only before the first scan)?
+==============================================================================
+
+You can specify an initial action by defining the macro 'YY_USER_INIT'
+(though note that 'yyout' may not be available at the time this macro is
+executed).  Or you can add to the beginning of your rules section:
+
+     %%
+         /* Must be indented! */
+         static int did_init = 0;
+
+         if ( ! did_init ){
+     do_my_init();
+             did_init = 1;
+         }
+
+
+File: flex.info,  Node: How do I execute code at termination?,  Next: Where else can I find help?,  Prev: How do I execute code only during initialization (only before the first scan)?,  Up: FAQ
+
+How do I execute code at termination?
+=====================================
+
+You can specify an action for the '<<EOF>>' rule.
+
+
+File: flex.info,  Node: Where else can I find help?,  Next: Can I include comments in the "rules" section of the file?,  Prev: How do I execute code at termination?,  Up: FAQ
+
+Where else can I find help?
+===========================
+
+You can find the flex homepage on the web at
+<http://flex.sourceforge.net/>.  See that page for details about flex
+mailing lists as well.
+
+
+File: flex.info,  Node: Can I include comments in the "rules" section of the file?,  Next: I get an error about undefined yywrap().,  Prev: Where else can I find help?,  Up: FAQ
+
+Can I include comments in the "rules" section of the file?
+==========================================================
+
+Yes, just about anywhere you want to.  See the manual for the specific
+syntax.
+
+
+File: flex.info,  Node: I get an error about undefined yywrap().,  Next: How can I change the matching pattern at run time?,  Prev: Can I include comments in the "rules" section of the file?,  Up: FAQ
+
+I get an error about undefined yywrap().
+========================================
+
+You must supply a 'yywrap()' function of your own, or link to 'libfl.a'
+(which provides one), or use
+
+     %option noyywrap
+
+   in your source to say you don't want a 'yywrap()' function.
+
+
+File: flex.info,  Node: How can I change the matching pattern at run time?,  Next: How can I expand macros in the input?,  Prev: I get an error about undefined yywrap().,  Up: FAQ
+
+How can I change the matching pattern at run time?
+==================================================
+
+You can't, it's compiled into a static table when flex builds the
+scanner.
+
+
+File: flex.info,  Node: How can I expand macros in the input?,  Next: How can I build a two-pass scanner?,  Prev: How can I change the matching pattern at run time?,  Up: FAQ
+
+How can I expand macros in the input?
+=====================================
+
+The best way to approach this problem is at a higher level, e.g., in the
+parser.
+
+   However, you can do this using multiple input buffers.
+
+     %%
+     macro/[a-z]+	{
+     /* Saw the macro "macro" followed by extra stuff. */
+     main_buffer = YY_CURRENT_BUFFER;
+     expansion_buffer = yy_scan_string(expand(yytext));
+     yy_switch_to_buffer(expansion_buffer);
+     }
+
+     <<EOF>>	{
+     if ( expansion_buffer )
+     {
+     // We were doing an expansion, return to where
+     // we were.
+     yy_switch_to_buffer(main_buffer);
+     yy_delete_buffer(expansion_buffer);
+     expansion_buffer = 0;
+     }
+     else
+     yyterminate();
+     }
+
+   You probably will want a stack of expansion buffers to allow nested
+macros.  From the above though hopefully the idea is clear.
+
+
+File: flex.info,  Node: How can I build a two-pass scanner?,  Next: How do I match any string not matched in the preceding rules?,  Prev: How can I expand macros in the input?,  Up: FAQ
+
+How can I build a two-pass scanner?
+===================================
+
+One way to do it is to filter the first pass to a temporary file, then
+process the temporary file on the second pass.  You will probably see a
+performance hit, due to all the disk I/O.
+
+   When you need to look ahead far forward like this, it almost always
+means that the right solution is to build a parse tree of the entire
+input, then walk it after the parse in order to generate the output.  In
+a sense, this is a two-pass approach, once through the text and once
+through the parse tree, but the performance hit for the latter is
+usually an order of magnitude smaller, since everything is already
+classified, in binary format, and residing in memory.
+
+
+File: flex.info,  Node: How do I match any string not matched in the preceding rules?,  Next: I am trying to port code from AT&T lex that uses yysptr and yysbuf.,  Prev: How can I build a two-pass scanner?,  Up: FAQ
+
+How do I match any string not matched in the preceding rules?
+=============================================================
+
+One way to assign precedence, is to place the more specific rules first.
+If two rules would match the same input (same sequence of characters)
+then the first rule listed in the 'flex' input wins, e.g.,
+
+     %%
+     foo[a-zA-Z_]+    return FOO_ID;
+     bar[a-zA-Z_]+    return BAR_ID;
+     [a-zA-Z_]+       return GENERIC_ID;
+
+   Note that the rule '[a-zA-Z_]+' must come *after* the others.  It
+will match the same amount of text as the more specific rules, and in
+that case the 'flex' scanner will pick the first rule listed in your
+scanner as the one to match.
+
+
+File: flex.info,  Node: I am trying to port code from AT&T lex that uses yysptr and yysbuf.,  Next: Is there a way to make flex treat NULL like a regular character?,  Prev: How do I match any string not matched in the preceding rules?,  Up: FAQ
+
+I am trying to port code from AT&T lex that uses yysptr and yysbuf.
+===================================================================
+
+Those are internal variables pointing into the AT&T scanner's input
+buffer.  I imagine they're being manipulated in user versions of the
+'input()' and 'unput()' functions.  If so, what you need to do is
+analyze those functions to figure out what they're doing, and then
+replace 'input()' with an appropriate definition of 'YY_INPUT'.  You
+shouldn't need to (and must not) replace 'flex''s 'unput()' function.
+
+
+File: flex.info,  Node: Is there a way to make flex treat NULL like a regular character?,  Next: Whenever flex can not match the input it says "flex scanner jammed".,  Prev: I am trying to port code from AT&T lex that uses yysptr and yysbuf.,  Up: FAQ
+
+Is there a way to make flex treat NULL like a regular character?
+================================================================
+
+Yes, '\0' and '\x00' should both do the trick.  Perhaps you have an
+ancient version of 'flex'.  The latest release is version 2.6.1.
+
+
+File: flex.info,  Node: Whenever flex can not match the input it says "flex scanner jammed".,  Next: Why doesn't flex have non-greedy operators like perl does?,  Prev: Is there a way to make flex treat NULL like a regular character?,  Up: FAQ
+
+Whenever flex can not match the input it says "flex scanner jammed".
+====================================================================
+
+You need to add a rule that matches the otherwise-unmatched text, e.g.,
+
+     %option yylineno
+     %%
+     [[a bunch of rules here]]
+
+     .	printf("bad input character '%s' at line %d\n", yytext, yylineno);
+
+   See '%option default' for more information.
+
+
+File: flex.info,  Node: Why doesn't flex have non-greedy operators like perl does?,  Next: Memory leak - 16386 bytes allocated by malloc.,  Prev: Whenever flex can not match the input it says "flex scanner jammed".,  Up: FAQ
+
+Why doesn't flex have non-greedy operators like perl does?
+==========================================================
+
+A DFA can do a non-greedy match by stopping the first time it enters an
+accepting state, instead of consuming input until it determines that no
+further matching is possible (a "jam" state).  This is actually easier
+to implement than longest leftmost match (which flex does).
+
+   But it's also much less useful than longest leftmost match.  In
+general, when you find yourself wishing for non-greedy matching, that's
+usually a sign that you're trying to make the scanner do some parsing.
+That's generally the wrong approach, since it lacks the power to do a
+decent job.  Better is to either introduce a separate parser, or to
+split the scanner into multiple scanners using (exclusive) start
+conditions.
+
+   You might have a separate start state once you've seen the 'BEGIN'.
+In that state, you might then have a regex that will match 'END' (to
+kick you out of the state), and perhaps '(.|\n)' to get a single
+character within the chunk ...
+
+   This approach also has much better error-reporting properties.
+
+
+File: flex.info,  Node: Memory leak - 16386 bytes allocated by malloc.,  Next: How do I track the byte offset for lseek()?,  Prev: Why doesn't flex have non-greedy operators like perl does?,  Up: FAQ
+
+Memory leak - 16386 bytes allocated by malloc.
+==============================================
+
+UPDATED 2002-07-10: As of 'flex' version 2.5.9, this leak means that you
+did not call 'yylex_destroy()'.  If you are using an earlier version of
+'flex', then read on.
+
+   The leak is about 16426 bytes.  That is, (8192 * 2 + 2) for the
+read-buffer, and about 40 for 'struct yy_buffer_state' (depending upon
+alignment).  The leak is in the non-reentrant C scanner only (NOT in the
+reentrant scanner, NOT in the C++ scanner).  Since 'flex' doesn't know
+when you are done, the buffer is never freed.
+
+   However, the leak won't multiply since the buffer is reused no matter
+how many times you call 'yylex()'.
+
+   If you want to reclaim the memory when you are completely done
+scanning, then you might try this:
+
+     /* For non-reentrant C scanner only. */
+     yy_delete_buffer(YY_CURRENT_BUFFER);
+     yy_init = 1;
+
+   Note: 'yy_init' is an "internal variable", and hasn't been tested in
+this situation.  It is possible that some other globals may need
+resetting as well.
+
+
+File: flex.info,  Node: How do I track the byte offset for lseek()?,  Next: How do I use my own I/O classes in a C++ scanner?,  Prev: Memory leak - 16386 bytes allocated by malloc.,  Up: FAQ
+
+How do I track the byte offset for lseek()?
+===========================================
+
+     >   We thought that it would be possible to have this number through the
+     >   evaluation of the following expression:
+     >
+     >   seek_position = (no_buffers)*YY_READ_BUF_SIZE + yy_c_buf_p - YY_CURRENT_BUFFER->yy_ch_buf
+
+   While this is the right idea, it has two problems.  The first is that
+it's possible that 'flex' will request less than 'YY_READ_BUF_SIZE'
+during an invocation of 'YY_INPUT' (or that your input source will
+return less even though 'YY_READ_BUF_SIZE' bytes were requested).  The
+second problem is that when refilling its internal buffer, 'flex' keeps
+some characters from the previous buffer (because usually it's in the
+middle of a match, and needs those characters to construct 'yytext' for
+the match once it's done).  Because of this, 'yy_c_buf_p -
+YY_CURRENT_BUFFER->yy_ch_buf' won't be exactly the number of characters
+already read from the current buffer.
+
+   An alternative solution is to count the number of characters you've
+matched since starting to scan.  This can be done by using
+'YY_USER_ACTION'.  For example,
+
+     #define YY_USER_ACTION num_chars += yyleng;
+
+   (You need to be careful to update your bookkeeping if you use
+'yymore('), 'yyless()', 'unput()', or 'input()'.)
+
+
+File: flex.info,  Node: How do I use my own I/O classes in a C++ scanner?,  Next: How do I skip as many chars as possible?,  Prev: How do I track the byte offset for lseek()?,  Up: FAQ
+
+How do I use my own I/O classes in a C++ scanner?
+=================================================
+
+When the flex C++ scanning class rewrite finally happens, then this sort
+of thing should become much easier.
+
+   You can do this by passing the various functions (such as
+'LexerInput()' and 'LexerOutput()') NULL 'iostream*''s, and then dealing
+with your own I/O classes surreptitiously (i.e., stashing them in
+special member variables).  This works because the only assumption about
+the lexer regarding what's done with the iostream's is that they're
+ultimately passed to 'LexerInput()' and 'LexerOutput', which then do
+whatever is necessary with them.
+
+
+File: flex.info,  Node: How do I skip as many chars as possible?,  Next: deleteme00,  Prev: How do I use my own I/O classes in a C++ scanner?,  Up: FAQ
+
+How do I skip as many chars as possible?
+========================================
+
+How do I skip as many chars as possible - without interfering with the
+other patterns?
+
+   In the example below, we want to skip over characters until we see
+the phrase "endskip".  The following will _NOT_ work correctly (do you
+see why not?)
+
+     /* INCORRECT SCANNER */
+     %x SKIP
+     %%
+     <INITIAL>startskip   BEGIN(SKIP);
+     ...
+     <SKIP>"endskip"       BEGIN(INITIAL);
+     <SKIP>.*             ;
+
+   The problem is that the pattern .* will eat up the word "endskip."
+The simplest (but slow) fix is:
+
+     <SKIP>"endskip"      BEGIN(INITIAL);
+     <SKIP>.              ;
+
+   The fix involves making the second rule match more, without making it
+match "endskip" plus something else.  So for example:
+
+     <SKIP>"endskip"     BEGIN(INITIAL);
+     <SKIP>[^e]+         ;
+     <SKIP>.		        ;/* so you eat up e's, too */
+
+
+File: flex.info,  Node: deleteme00,  Next: Are certain equivalent patterns faster than others?,  Prev: How do I skip as many chars as possible?,  Up: FAQ
+
+deleteme00
+==========
+
+     QUESTION:
+     When was flex born?
+
+     Vern Paxson took over
+     the Software Tools lex project from Jef Poskanzer in 1982.  At that point it
+     was written in Ratfor.  Around 1987 or so, Paxson translated it into C, and
+     a legend was born :-).
+
+
+File: flex.info,  Node: Are certain equivalent patterns faster than others?,  Next: Is backing up a big deal?,  Prev: deleteme00,  Up: FAQ
+
+Are certain equivalent patterns faster than others?
+===================================================
+
+     To: Adoram Rogel <adoram@orna.hybridge.com>
+     Subject: Re: Flex 2.5.2 performance questions
+     In-reply-to: Your message of Wed, 18 Sep 96 11:12:17 EDT.
+     Date: Wed, 18 Sep 96 10:51:02 PDT
+     From: Vern Paxson <vern>
+
+     [Note, the most recent flex release is 2.5.4, which you can get from
+     ftp.ee.lbl.gov.  It has bug fixes over 2.5.2 and 2.5.3.]
+
+     > 1. Using the pattern
+     >    ([Ff](oot)?)?[Nn](ote)?(\.)?
+     >    instead of
+     >    (((F|f)oot(N|n)ote)|((N|n)ote)|((N|n)\.)|((F|f)(N|n)(\.)))
+     >    (in a very complicated flex program) caused the program to slow from
+     >    300K+/min to 100K/min (no other changes were done).
+
+     These two are not equivalent.  For example, the first can match "footnote."
+     but the second can only match "footnote".  This is almost certainly the
+     cause in the discrepancy - the slower scanner run is matching more tokens,
+     and/or having to do more backing up.
+
+     > 2. Which of these two are better: [Ff]oot or (F|f)oot ?
+
+     From a performance point of view, they're equivalent (modulo presumably
+     minor effects such as memory cache hit rates; and the presence of trailing
+     context, see below).  From a space point of view, the first is slightly
+     preferable.
+
+     > 3. I have a pattern that look like this:
+     >    pats {p1}|{p2}|{p3}|...|{p50}     (50 patterns ORd)
+     >
+     >    running yet another complicated program that includes the following rule:
+     >    <snext>{and}/{no4}{bb}{pats}
+     >
+     >    gets me to "too complicated - over 32,000 states"...
+
+     I can't tell from this example whether the trailing context is variable-length
+     or fixed-length (it could be the latter if {and} is fixed-length).  If it's
+     variable length, which flex -p will tell you, then this reflects a basic
+     performance problem, and if you can eliminate it by restructuring your
+     scanner, you will see significant improvement.
+
+     >    so I divided {pats} to {pats1}, {pats2},..., {pats5} each consists of about
+     >    10 patterns and changed the rule to be 5 rules.
+     >    This did compile, but what is the rule of thumb here ?
+
+     The rule is to avoid trailing context other than fixed-length, in which for
+     a/b, either the 'a' pattern or the 'b' pattern have a fixed length.  Use
+     of the '|' operator automatically makes the pattern variable length, so in
+     this case '[Ff]oot' is preferred to '(F|f)oot'.
+
+     > 4. I changed a rule that looked like this:
+     >    <snext8>{and}{bb}/{ROMAN}[^A-Za-z] { BEGIN...
+     >
+     >    to the next 2 rules:
+     >    <snext8>{and}{bb}/{ROMAN}[A-Za-z] { ECHO;}
+     >    <snext8>{and}{bb}/{ROMAN}         { BEGIN...
+     >
+     >    Again, I understand the using [^...] will cause a great performance loss
+
+     Actually, it doesn't cause any sort of performance loss.  It's a surprising
+     fact about regular expressions that they always match in linear time
+     regardless of how complex they are.
+
+     >    but are there any specific rules about it ?
+
+     See the "Performance Considerations" section of the man page, and also
+     the example in MISC/fastwc/.
+
+     		Vern
+
+
+File: flex.info,  Node: Is backing up a big deal?,  Next: Can I fake multi-byte character support?,  Prev: Are certain equivalent patterns faster than others?,  Up: FAQ
+
+Is backing up a big deal?
+=========================
+
+     To: Adoram Rogel <adoram@hybridge.com>
+     Subject: Re: Flex 2.5.2 performance questions
+     In-reply-to: Your message of Thu, 19 Sep 96 10:16:04 EDT.
+     Date: Thu, 19 Sep 96 09:58:00 PDT
+     From: Vern Paxson <vern>
+
+     > a lot about the backing up problem.
+     > I believe that there lies my biggest problem, and I'll try to improve
+     > it.
+
+     Since you have variable trailing context, this is a bigger performance
+     problem.  Fixing it is usually easier than fixing backing up, which in a
+     complicated scanner (yours seems to fit the bill) can be extremely
+     difficult to do correctly.
+
+     You also don't mention what flags you are using for your scanner.
+     -f makes a large speed difference, and -Cfe buys you nearly as much
+     speed but the resulting scanner is considerably smaller.
+
+     > I have an | operator in {and} and in {pats} so both of them are variable
+     > length.
+
+     -p should have reported this.
+
+     > Is changing one of them to fixed-length is enough ?
+
+     Yes.
+
+     > Is it possible to change the 32,000 states limit ?
+
+     Yes.  I've appended instructions on how.  Before you make this change,
+     though, you should think about whether there are ways to fundamentally
+     simplify your scanner - those are certainly preferable!
+
+     		Vern
+
+     To increase the 32K limit (on a machine with 32 bit integers), you increase
+     the magnitude of the following in flexdef.h:
+
+     #define JAMSTATE -32766 /* marks a reference to the state that always jams */
+     #define MAXIMUM_MNS 31999
+     #define BAD_SUBSCRIPT -32767
+     #define MAX_SHORT 32700
+
+     Adding a 0 or two after each should do the trick.
+
+
+File: flex.info,  Node: Can I fake multi-byte character support?,  Next: deleteme01,  Prev: Is backing up a big deal?,  Up: FAQ
+
+Can I fake multi-byte character support?
+========================================
+
+     To: Heeman_Lee@hp.com
+     Subject: Re: flex - multi-byte support?
+     In-reply-to: Your message of Thu, 03 Oct 1996 17:24:04 PDT.
+     Date: Fri, 04 Oct 1996 11:42:18 PDT
+     From: Vern Paxson <vern>
+
+     >      I assume as long as my *.l file defines the
+     >      range of expected character code values (in octal format), flex will
+     >      scan the file and read multi-byte characters correctly. But I have no
+     >      confidence in this assumption.
+
+     Your lack of confidence is justified - this won't work.
+
+     Flex has in it a widespread assumption that the input is processed
+     one byte at a time.  Fixing this is on the to-do list, but is involved,
+     so it won't happen any time soon.  In the interim, the best I can suggest
+     (unless you want to try fixing it yourself) is to write your rules in
+     terms of pairs of bytes, using definitions in the first section:
+
+     	X	\xfe\xc2
+     	...
+     	%%
+     	foo{X}bar	found_foo_fe_c2_bar();
+
+     etc.  Definitely a pain - sorry about that.
+
+     By the way, the email address you used for me is ancient, indicating you
+     have a very old version of flex.  You can get the most recent, 2.5.4, from
+     ftp.ee.lbl.gov.
+
+     		Vern
+
+
+File: flex.info,  Node: deleteme01,  Next: Can you discuss some flex internals?,  Prev: Can I fake multi-byte character support?,  Up: FAQ
+
+deleteme01
+==========
+
+     To: moleary@primus.com
+     Subject: Re: Flex / Unicode compatibility question
+     In-reply-to: Your message of Tue, 22 Oct 1996 10:15:42 PDT.
+     Date: Tue, 22 Oct 1996 11:06:13 PDT
+     From: Vern Paxson <vern>
+
+     Unfortunately flex at the moment has a widespread assumption within it
+     that characters are processed 8 bits at a time.  I don't see any easy
+     fix for this (other than writing your rules in terms of double characters -
+     a pain).  I also don't know of a wider lex, though you might try surfing
+     the Plan 9 stuff because I know it's a Unicode system, and also the PCCT
+     toolkit (try searching say Alta Vista for "Purdue Compiler Construction
+     Toolkit").
+
+     Fixing flex to handle wider characters is on the long-term to-do list.
+     But since flex is a strictly spare-time project these days, this probably
+     won't happen for quite a while, unless someone else does it first.
+
+     		Vern
+
+
+File: flex.info,  Node: Can you discuss some flex internals?,  Next: unput() messes up yy_at_bol,  Prev: deleteme01,  Up: FAQ
+
+Can you discuss some flex internals?
+====================================
+
+     To: Johan Linde <jl@theophys.kth.se>
+     Subject: Re: translation of flex
+     In-reply-to: Your message of Sun, 10 Nov 1996 09:16:36 PST.
+     Date: Mon, 11 Nov 1996 10:33:50 PST
+     From: Vern Paxson <vern>
+
+     > I'm working for the Swedish team translating GNU program, and I'm currently
+     > working with flex. I have a few questions about some of the messages which
+     > I hope you can answer.
+
+     All of the things you're wondering about, by the way, concerning flex
+     internals - probably the only person who understands what they mean in
+     English is me!  So I wouldn't worry too much about getting them right.
+     That said ...
+
+     > #: main.c:545
+     > msgid "  %d protos created\n"
+     >
+     > Does proto mean prototype?
+
+     Yes - prototypes of state compression tables.
+
+     > #: main.c:539
+     > msgid "  %d/%d (peak %d) template nxt-chk entries created\n"
+     >
+     > Here I'm mainly puzzled by 'nxt-chk'. I guess it means 'next-check'. (?)
+     > However, 'template next-check entries' doesn't make much sense to me. To be
+     > able to find a good translation I need to know a little bit more about it.
+
+     There is a scheme in the Aho/Sethi/Ullman compiler book for compressing
+     scanner tables.  It involves creating two pairs of tables.  The first has
+     "base" and "default" entries, the second has "next" and "check" entries.
+     The "base" entry is indexed by the current state and yields an index into
+     the next/check table.  The "default" entry gives what to do if the state
+     transition isn't found in next/check.  The "next" entry gives the next
+     state to enter, but only if the "check" entry verifies that this entry is
+     correct for the current state.  Flex creates templates of series of
+     next/check entries and then encodes differences from these templates as a
+     way to compress the tables.
+
+     > #: main.c:533
+     > msgid "  %d/%d base-def entries created\n"
+     >
+     > The same problem here for 'base-def'.
+
+     See above.
+
+     		Vern
+
+
+File: flex.info,  Node: unput() messes up yy_at_bol,  Next: The | operator is not doing what I want,  Prev: Can you discuss some flex internals?,  Up: FAQ
+
+unput() messes up yy_at_bol
+===========================
+
+     To: Xinying Li <xli@npac.syr.edu>
+     Subject: Re: FLEX ?
+     In-reply-to: Your message of Wed, 13 Nov 1996 17:28:38 PST.
+     Date: Wed, 13 Nov 1996 19:51:54 PST
+     From: Vern Paxson <vern>
+
+     > "unput()" them to input flow, question occurs. If I do this after I scan
+     > a carriage, the variable "YY_CURRENT_BUFFER->yy_at_bol" is changed. That
+     > means the carriage flag has gone.
+
+     You can control this by calling yy_set_bol().  It's described in the manual.
+
+     >      And if in pre-reading it goes to the end of file, is anything done
+     > to control the end of curren buffer and end of file?
+
+     No, there's no way to put back an end-of-file.
+
+     >      By the way I am using flex 2.5.2 and using the "-l".
+
+     The latest release is 2.5.4, by the way.  It fixes some bugs in 2.5.2 and
+     2.5.3.  You can get it from ftp.ee.lbl.gov.
+
+     		Vern
+
+
+File: flex.info,  Node: The | operator is not doing what I want,  Next: Why can't flex understand this variable trailing context pattern?,  Prev: unput() messes up yy_at_bol,  Up: FAQ
+
+The | operator is not doing what I want
+=======================================
+
+     To: Alain.ISSARD@st.com
+     Subject: Re: Start condition with FLEX
+     In-reply-to: Your message of Mon, 18 Nov 1996 09:45:02 PST.
+     Date: Mon, 18 Nov 1996 10:41:34 PST
+     From: Vern Paxson <vern>
+
+     > I am not able to use the start condition scope and to use the | (OR) with
+     > rules having start conditions.
+
+     The problem is that if you use '|' as a regular expression operator, for
+     example "a|b" meaning "match either 'a' or 'b'", then it must *not* have
+     any blanks around it.  If you instead want the special '|' *action* (which
+     from your scanner appears to be the case), which is a way of giving two
+     different rules the same action:
+
+     	foo	|
+     	bar	matched_foo_or_bar();
+
+     then '|' *must* be separated from the first rule by whitespace and *must*
+     be followed by a new line.  You *cannot* write it as:
+
+     	foo | bar	matched_foo_or_bar();
+
+     even though you might think you could because yacc supports this syntax.
+     The reason for this unfortunately incompatibility is historical, but it's
+     unlikely to be changed.
+
+     Your problems with start condition scope are simply due to syntax errors
+     from your use of '|' later confusing flex.
+
+     Let me know if you still have problems.
+
+     		Vern
+
+
+File: flex.info,  Node: Why can't flex understand this variable trailing context pattern?,  Next: The ^ operator isn't working,  Prev: The | operator is not doing what I want,  Up: FAQ
+
+Why can't flex understand this variable trailing context pattern?
+=================================================================
+
+     To: Gregory Margo <gmargo@newton.vip.best.com>
+     Subject: Re: flex-2.5.3 bug report
+     In-reply-to: Your message of Sat, 23 Nov 1996 16:50:09 PST.
+     Date: Sat, 23 Nov 1996 17:07:32 PST
+     From: Vern Paxson <vern>
+
+     > Enclosed is a lex file that "real" lex will process, but I cannot get
+     > flex to process it.  Could you try it and maybe point me in the right direction?
+
+     Your problem is that some of the definitions in the scanner use the '/'
+     trailing context operator, and have it enclosed in ()'s.  Flex does not
+     allow this operator to be enclosed in ()'s because doing so allows undefined
+     regular expressions such as "(a/b)+".  So the solution is to remove the
+     parentheses.  Note that you must also be building the scanner with the -l
+     option for AT&T lex compatibility.  Without this option, flex automatically
+     encloses the definitions in parentheses.
+
+     		Vern
+
+
+File: flex.info,  Node: The ^ operator isn't working,  Next: Trailing context is getting confused with trailing optional patterns,  Prev: Why can't flex understand this variable trailing context pattern?,  Up: FAQ
+
+The ^ operator isn't working
+============================
+
+     To: Thomas Hadig <hadig@toots.physik.rwth-aachen.de>
+     Subject: Re: Flex Bug ?
+     In-reply-to: Your message of Tue, 26 Nov 1996 14:35:01 PST.
+     Date: Tue, 26 Nov 1996 11:15:05 PST
+     From: Vern Paxson <vern>
+
+     > In my lexer code, i have the line :
+     > ^\*.*          { }
+     >
+     > Thus all lines starting with an astrix (*) are comment lines.
+     > This does not work !
+
+     I can't get this problem to reproduce - it works fine for me.  Note
+     though that if what you have is slightly different:
+
+     	COMMENT	^\*.*
+     	%%
+     	{COMMENT}	{ }
+
+     then it won't work, because flex pushes back macro definitions enclosed
+     in ()'s, so the rule becomes
+
+     	(^\*.*)		{ }
+
+     and now that the '^' operator is not at the immediate beginning of the
+     line, it's interpreted as just a regular character.  You can avoid this
+     behavior by using the "-l" lex-compatibility flag, or "%option lex-compat".
+
+     		Vern
+
+
+File: flex.info,  Node: Trailing context is getting confused with trailing optional patterns,  Next: Is flex GNU or not?,  Prev: The ^ operator isn't working,  Up: FAQ
+
+Trailing context is getting confused with trailing optional patterns
+====================================================================
+
+     To: Adoram Rogel <adoram@hybridge.com>
+     Subject: Re: Flex 2.5.4 BOF ???
+     In-reply-to: Your message of Tue, 26 Nov 1996 16:10:41 PST.
+     Date: Wed, 27 Nov 1996 10:56:25 PST
+     From: Vern Paxson <vern>
+
+     >     Organization(s)?/[a-z]
+     >
+     > This matched "Organizations" (looking in debug mode, the trailing s
+     > was matched with trailing context instead of the optional (s) in the
+     > end of the word.
+
+     That should only happen with lex.  Flex can properly match this pattern.
+     (That might be what you're saying, I'm just not sure.)
+
+     > Is there a way to avoid this dangerous trailing context problem ?
+
+     Unfortunately, there's no easy way.  On the other hand, I don't see why
+     it should be a problem.  Lex's matching is clearly wrong, and I'd hope
+     that usually the intent remains the same as expressed with the pattern,
+     so flex's matching will be correct.
+
+     		Vern
+
+
+File: flex.info,  Node: Is flex GNU or not?,  Next: ERASEME53,  Prev: Trailing context is getting confused with trailing optional patterns,  Up: FAQ
+
+Is flex GNU or not?
+===================
+
+     To: Cameron MacKinnon <mackin@interlog.com>
+     Subject: Re: Flex documentation bug
+     In-reply-to: Your message of Mon, 02 Dec 1996 00:07:08 PST.
+     Date: Sun, 01 Dec 1996 22:29:39 PST
+     From: Vern Paxson <vern>
+
+     > I'm not sure how or where to submit bug reports (documentation or
+     > otherwise) for the GNU project stuff ...
+
+     Well, strictly speaking flex isn't part of the GNU project.  They just
+     distribute it because no one's written a decent GPL'd lex replacement.
+     So you should send bugs directly to me.  Those sent to the GNU folks
+     sometimes find there way to me, but some may drop between the cracks.
+
+     > In GNU Info, under the section 'Start Conditions', and also in the man
+     > page (mine's dated April '95) is a nice little snippet showing how to
+     > parse C quoted strings into a buffer, defined to be MAX_STR_CONST in
+     > size. Unfortunately, no overflow checking is ever done ...
+
+     This is already mentioned in the manual:
+
+     Finally, here's an example of how to  match  C-style  quoted
+     strings using exclusive start conditions, including expanded
+     escape sequences (but not including checking  for  a  string
+     that's too long):
+
+     The reason for not doing the overflow checking is that it will needlessly
+     clutter up an example whose main purpose is just to demonstrate how to
+     use flex.
+
+     The latest release is 2.5.4, by the way, available from ftp.ee.lbl.gov.
+
+     		Vern
+
+
+File: flex.info,  Node: ERASEME53,  Next: I need to scan if-then-else blocks and while loops,  Prev: Is flex GNU or not?,  Up: FAQ
+
+ERASEME53
+=========
+
+     To: tsv@cs.UManitoba.CA
+     Subject: Re: Flex (reg)..
+     In-reply-to: Your message of Thu, 06 Mar 1997 23:50:16 PST.
+     Date: Thu, 06 Mar 1997 15:54:19 PST
+     From: Vern Paxson <vern>
+
+     > [:alpha:] ([:alnum:] | \\_)*
+
+     If your rule really has embedded blanks as shown above, then it won't
+     work, as the first blank delimits the rule from the action.  (It wouldn't
+     even compile ...)  You need instead:
+
+     [:alpha:]([:alnum:]|\\_)*
+
+     and that should work fine - there's no restriction on what can go inside
+     of ()'s except for the trailing context operator, '/'.
+
+     		Vern
+
+
+File: flex.info,  Node: I need to scan if-then-else blocks and while loops,  Next: ERASEME55,  Prev: ERASEME53,  Up: FAQ
+
+I need to scan if-then-else blocks and while loops
+==================================================
+
+     To: "Mike Stolnicki" <mstolnic@ford.com>
+     Subject: Re: FLEX help
+     In-reply-to: Your message of Fri, 30 May 1997 13:33:27 PDT.
+     Date: Fri, 30 May 1997 10:46:35 PDT
+     From: Vern Paxson <vern>
+
+     > We'd like to add "if-then-else", "while", and "for" statements to our
+     > language ...
+     > We've investigated many possible solutions.  The one solution that seems
+     > the most reasonable involves knowing the position of a TOKEN in yyin.
+
+     I strongly advise you to instead build a parse tree (abstract syntax tree)
+     and loop over that instead.  You'll find this has major benefits in keeping
+     your interpreter simple and extensible.
+
+     That said, the functionality you mention for get_position and set_position
+     have been on the to-do list for a while.  As flex is a purely spare-time
+     project for me, no guarantees when this will be added (in particular, it
+     for sure won't be for many months to come).
+
+     		Vern
+
+
+File: flex.info,  Node: ERASEME55,  Next: ERASEME56,  Prev: I need to scan if-then-else blocks and while loops,  Up: FAQ
+
+ERASEME55
+=========
+
+     To: Colin Paul Adams <colin@colina.demon.co.uk>
+     Subject: Re: Flex C++ classes and Bison
+     In-reply-to: Your message of 09 Aug 1997 17:11:41 PDT.
+     Date: Fri, 15 Aug 1997 10:48:19 PDT
+     From: Vern Paxson <vern>
+
+     > #define YY_DECL   int yylex (YYSTYPE *lvalp, struct parser_control
+     > *parm)
+     >
+     > I have been trying  to get this to work as a C++ scanner, but it does
+     > not appear to be possible (warning that it matches no declarations in
+     > yyFlexLexer, or something like that).
+     >
+     > Is this supposed to be possible, or is it being worked on (I DID
+     > notice the comment that scanner classes are still experimental, so I'm
+     > not too hopeful)?
+
+     What you need to do is derive a subclass from yyFlexLexer that provides
+     the above yylex() method, squirrels away lvalp and parm into member
+     variables, and then invokes yyFlexLexer::yylex() to do the regular scanning.
+
+     		Vern
+
+
+File: flex.info,  Node: ERASEME56,  Next: ERASEME57,  Prev: ERASEME55,  Up: FAQ
+
+ERASEME56
+=========
+
+     To: Mikael.Latvala@lmf.ericsson.se
+     Subject: Re: Possible mistake in Flex v2.5 document
+     In-reply-to: Your message of Fri, 05 Sep 1997 16:07:24 PDT.
+     Date: Fri, 05 Sep 1997 10:01:54 PDT
+     From: Vern Paxson <vern>
+
+     > In that example you show how to count comment lines when using
+     > C style /* ... */ comments. My question is, shouldn't you take into
+     > account a scenario where end of a comment marker occurs inside
+     > character or string literals?
+
+     The scanner certainly needs to also scan character and string literals.
+     However it does that (there's an example in the man page for strings), the
+     lexer will recognize the beginning of the literal before it runs across the
+     embedded "/*".  Consequently, it will finish scanning the literal before it
+     even considers the possibility of matching "/*".
+
+     Example:
+
+     	'([^']*|{ESCAPE_SEQUENCE})'
+
+     will match all the text between the ''s (inclusive).  So the lexer
+     considers this as a token beginning at the first ', and doesn't even
+     attempt to match other tokens inside it.
+
+     I thinnk this subtlety is not worth putting in the manual, as I suspect
+     it would confuse more people than it would enlighten.
+
+     		Vern
+
+
+File: flex.info,  Node: ERASEME57,  Next: Is there a repository for flex scanners?,  Prev: ERASEME56,  Up: FAQ
+
+ERASEME57
+=========
+
+     To: "Marty Leisner" <leisner@sdsp.mc.xerox.com>
+     Subject: Re: flex limitations
+     In-reply-to: Your message of Sat, 06 Sep 1997 11:27:21 PDT.
+     Date: Mon, 08 Sep 1997 11:38:08 PDT
+     From: Vern Paxson <vern>
+
+     > %%
+     > [a-zA-Z]+       /* skip a line */
+     >                 {  printf("got %s\n", yytext); }
+     > %%
+
+     What version of flex are you using?  If I feed this to 2.5.4, it complains:
+
+     	"bug.l", line 5: EOF encountered inside an action
+     	"bug.l", line 5: unrecognized rule
+     	"bug.l", line 5: fatal parse error
+
+     Not the world's greatest error message, but it manages to flag the problem.
+
+     (With the introduction of start condition scopes, flex can't accommodate
+     an action on a separate line, since it's ambiguous with an indented rule.)
+
+     You can get 2.5.4 from ftp.ee.lbl.gov.
+
+     		Vern
+
+
+File: flex.info,  Node: Is there a repository for flex scanners?,  Next: How can I conditionally compile or preprocess my flex input file?,  Prev: ERASEME57,  Up: FAQ
+
+Is there a repository for flex scanners?
+========================================
+
+Not that we know of.  You might try asking on comp.compilers.
+
+
+File: flex.info,  Node: How can I conditionally compile or preprocess my flex input file?,  Next: Where can I find grammars for lex and yacc?,  Prev: Is there a repository for flex scanners?,  Up: FAQ
+
+How can I conditionally compile or preprocess my flex input file?
+=================================================================
+
+Flex doesn't have a preprocessor like C does.  You might try using m4,
+or the C preprocessor plus a sed script to clean up the result.
+
+
+File: flex.info,  Node: Where can I find grammars for lex and yacc?,  Next: I get an end-of-buffer message for each character scanned.,  Prev: How can I conditionally compile or preprocess my flex input file?,  Up: FAQ
+
+Where can I find grammars for lex and yacc?
+===========================================
+
+In the sources for flex and bison.
+
+
+File: flex.info,  Node: I get an end-of-buffer message for each character scanned.,  Next: unnamed-faq-62,  Prev: Where can I find grammars for lex and yacc?,  Up: FAQ
+
+I get an end-of-buffer message for each character scanned.
+==========================================================
+
+This will happen if your LexerInput() function returns only one
+character at a time, which can happen either if you're scanner is
+"interactive", or if the streams library on your platform always returns
+1 for yyin->gcount().
+
+   Solution: override LexerInput() with a version that returns whole
+buffers.
+
+
+File: flex.info,  Node: unnamed-faq-62,  Next: unnamed-faq-63,  Prev: I get an end-of-buffer message for each character scanned.,  Up: FAQ
+
+unnamed-faq-62
+==============
+
+     To: Georg.Rehm@CL-KI.Uni-Osnabrueck.DE
+     Subject: Re: Flex maximums
+     In-reply-to: Your message of Mon, 17 Nov 1997 17:16:06 PST.
+     Date: Mon, 17 Nov 1997 17:16:15 PST
+     From: Vern Paxson <vern>
+
+     > I took a quick look into the flex-sources and altered some #defines in
+     > flexdefs.h:
+     >
+     > 	#define INITIAL_MNS 64000
+     > 	#define MNS_INCREMENT 1024000
+     > 	#define MAXIMUM_MNS 64000
+
+     The things to fix are to add a couple of zeroes to:
+
+     #define JAMSTATE -32766 /* marks a reference to the state that always jams */
+     #define MAXIMUM_MNS 31999
+     #define BAD_SUBSCRIPT -32767
+     #define MAX_SHORT 32700
+
+     and, if you get complaints about too many rules, make the following change too:
+
+     	#define YY_TRAILING_MASK 0x200000
+     	#define YY_TRAILING_HEAD_MASK 0x400000
+
+     - Vern
+
+
+File: flex.info,  Node: unnamed-faq-63,  Next: unnamed-faq-64,  Prev: unnamed-faq-62,  Up: FAQ
+
+unnamed-faq-63
+==============
+
+     To: jimmey@lexis-nexis.com (Jimmey Todd)
+     Subject: Re: FLEX question regarding istream vs ifstream
+     In-reply-to: Your message of Mon, 08 Dec 1997 15:54:15 PST.
+     Date: Mon, 15 Dec 1997 13:21:35 PST
+     From: Vern Paxson <vern>
+
+     >         stdin_handle = YY_CURRENT_BUFFER;
+     >         ifstream fin( "aFile" );
+     >         yy_switch_to_buffer( yy_create_buffer( fin, YY_BUF_SIZE ) );
+     >
+     > What I'm wanting to do, is pass the contents of a file thru one set
+     > of rules and then pass stdin thru another set... It works great if, I
+     > don't use the C++ classes. But since everything else that I'm doing is
+     > in C++, I thought I'd be consistent.
+     >
+     > The problem is that 'yy_create_buffer' is expecting an istream* as it's
+     > first argument (as stated in the man page). However, fin is a ifstream
+     > object. Any ideas on what I might be doing wrong? Any help would be
+     > appreciated. Thanks!!
+
+     You need to pass &fin, to turn it into an ifstream* instead of an ifstream.
+     Then its type will be compatible with the expected istream*, because ifstream
+     is derived from istream.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-64,  Next: unnamed-faq-65,  Prev: unnamed-faq-63,  Up: FAQ
+
+unnamed-faq-64
+==============
+
+     To: Enda Fadian <fadiane@piercom.ie>
+     Subject: Re: Question related to Flex man page?
+     In-reply-to: Your message of Tue, 16 Dec 1997 15:17:34 PST.
+     Date: Tue, 16 Dec 1997 14:17:09 PST
+     From: Vern Paxson <vern>
+
+     > Can you explain to me what is ment by a long-jump in relation to flex?
+
+     Using the longjmp() function while inside yylex() or a routine called by it.
+
+     > what is the flex activation frame.
+
+     Just yylex()'s stack frame.
+
+     > As far as I can see yyrestart will bring me back to the sart of the input
+     > file and using flex++ isnot really an option!
+
+     No, yyrestart() doesn't imply a rewind, even though its name might sound
+     like it does.  It tells the scanner to flush its internal buffers and
+     start reading from the given file at its present location.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-65,  Next: unnamed-faq-66,  Prev: unnamed-faq-64,  Up: FAQ
+
+unnamed-faq-65
+==============
+
+     To: hassan@larc.info.uqam.ca (Hassan Alaoui)
+     Subject: Re: Need urgent Help
+     In-reply-to: Your message of Sat, 20 Dec 1997 19:38:19 PST.
+     Date: Sun, 21 Dec 1997 21:30:46 PST
+     From: Vern Paxson <vern>
+
+     > /usr/lib/yaccpar: In function `int yyparse()':
+     > /usr/lib/yaccpar:184: warning: implicit declaration of function `int yylex(...)'
+     >
+     > ld: Undefined symbol
+     >    _yylex
+     >    _yyparse
+     >    _yyin
+
+     This is a known problem with Solaris C++ (and/or Solaris yacc).  I believe
+     the fix is to explicitly insert some 'extern "C"' statements for the
+     corresponding routines/symbols.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-66,  Next: unnamed-faq-67,  Prev: unnamed-faq-65,  Up: FAQ
+
+unnamed-faq-66
+==============
+
+     To: mc0307@mclink.it
+     Cc: gnu@prep.ai.mit.edu
+     Subject: Re: [mc0307@mclink.it: Help request]
+     In-reply-to: Your message of Fri, 12 Dec 1997 17:57:29 PST.
+     Date: Sun, 21 Dec 1997 22:33:37 PST
+     From: Vern Paxson <vern>
+
+     > This is my definition for float and integer types:
+     > . . .
+     > NZD          [1-9]
+     > ...
+     > I've tested my program on other lex version (on UNIX Sun Solaris an HP
+     > UNIX) and it work well, so I think that my definitions are correct.
+     > There are any differences between Lex and Flex?
+
+     There are indeed differences, as discussed in the man page.  The one
+     you are probably running into is that when flex expands a name definition,
+     it puts parentheses around the expansion, while lex does not.  There's
+     an example in the man page of how this can lead to different matching.
+     Flex's behavior complies with the POSIX standard (or at least with the
+     last POSIX draft I saw).
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-67,  Next: unnamed-faq-68,  Prev: unnamed-faq-66,  Up: FAQ
+
+unnamed-faq-67
+==============
+
+     To: hassan@larc.info.uqam.ca (Hassan Alaoui)
+     Subject: Re: Thanks
+     In-reply-to: Your message of Mon, 22 Dec 1997 16:06:35 PST.
+     Date: Mon, 22 Dec 1997 14:35:05 PST
+     From: Vern Paxson <vern>
+
+     > Thank you very much for your help. I compile and link well with C++ while
+     > declaring 'yylex ...' extern, But a little problem remains. I get a
+     > segmentation default when executing ( I linked with lfl library) while it
+     > works well when using LEX instead of flex. Do you have some ideas about the
+     > reason for this ?
+
+     The one possible reason for this that comes to mind is if you've defined
+     yytext as "extern char yytext[]" (which is what lex uses) instead of
+     "extern char *yytext" (which is what flex uses).  If it's not that, then
+     I'm afraid I don't know what the problem might be.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-68,  Next: unnamed-faq-69,  Prev: unnamed-faq-67,  Up: FAQ
+
+unnamed-faq-68
+==============
+
+     To: "Bart Niswonger" <NISWONGR@almaden.ibm.com>
+     Subject: Re: flex 2.5: c++ scanners & start conditions
+     In-reply-to: Your message of Tue, 06 Jan 1998 10:34:21 PST.
+     Date: Tue, 06 Jan 1998 19:19:30 PST
+     From: Vern Paxson <vern>
+
+     > The problem is that when I do this (using %option c++) start
+     > conditions seem to not apply.
+
+     The BEGIN macro modifies the yy_start variable.  For C scanners, this
+     is a static with scope visible through the whole file.  For C++ scanners,
+     it's a member variable, so it only has visible scope within a member
+     function.  Your lexbegin() routine is not a member function when you
+     build a C++ scanner, so it's not modifying the correct yy_start.  The
+     diagnostic that indicates this is that you found you needed to add
+     a declaration of yy_start in order to get your scanner to compile when
+     using C++; instead, the correct fix is to make lexbegin() a member
+     function (by deriving from yyFlexLexer).
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-69,  Next: unnamed-faq-70,  Prev: unnamed-faq-68,  Up: FAQ
+
+unnamed-faq-69
+==============
+
+     To: "Boris Zinin" <boris@ippe.rssi.ru>
+     Subject: Re: current position in flex buffer
+     In-reply-to: Your message of Mon, 12 Jan 1998 18:58:23 PST.
+     Date: Mon, 12 Jan 1998 12:03:15 PST
+     From: Vern Paxson <vern>
+
+     > The problem is how to determine the current position in flex active
+     > buffer when a rule is matched....
+
+     You will need to keep track of this explicitly, such as by redefining
+     YY_USER_ACTION to count the number of characters matched.
+
+     The latest flex release, by the way, is 2.5.4, available from ftp.ee.lbl.gov.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-70,  Next: unnamed-faq-71,  Prev: unnamed-faq-69,  Up: FAQ
+
+unnamed-faq-70
+==============
+
+     To: Bik.Dhaliwal@bis.org
+     Subject: Re: Flex question
+     In-reply-to: Your message of Mon, 26 Jan 1998 13:05:35 PST.
+     Date: Tue, 27 Jan 1998 22:41:52 PST
+     From: Vern Paxson <vern>
+
+     > That requirement involves knowing
+     > the character position at which a particular token was matched
+     > in the lexer.
+
+     The way you have to do this is by explicitly keeping track of where
+     you are in the file, by counting the number of characters scanned
+     for each token (available in yyleng).  It may prove convenient to
+     do this by redefining YY_USER_ACTION, as described in the manual.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-71,  Next: unnamed-faq-72,  Prev: unnamed-faq-70,  Up: FAQ
+
+unnamed-faq-71
+==============
+
+     To: Vladimir Alexiev <vladimir@cs.ualberta.ca>
+     Subject: Re: flex: how to control start condition from parser?
+     In-reply-to: Your message of Mon, 26 Jan 1998 05:50:16 PST.
+     Date: Tue, 27 Jan 1998 22:45:37 PST
+     From: Vern Paxson <vern>
+
+     > It seems useful for the parser to be able to tell the lexer about such
+     > context dependencies, because then they don't have to be limited to
+     > local or sequential context.
+
+     One way to do this is to have the parser call a stub routine that's
+     included in the scanner's .l file, and consequently that has access ot
+     BEGIN.  The only ugliness is that the parser can't pass in the state
+     it wants, because those aren't visible - but if you don't have many
+     such states, then using a different set of names doesn't seem like
+     to much of a burden.
+
+     While generating a .h file like you suggests is certainly cleaner,
+     flex development has come to a virtual stand-still :-(, so a workaround
+     like the above is much more pragmatic than waiting for a new feature.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-72,  Next: unnamed-faq-73,  Prev: unnamed-faq-71,  Up: FAQ
+
+unnamed-faq-72
+==============
+
+     To: Barbara Denny <denny@3com.com>
+     Subject: Re: freebsd flex bug?
+     In-reply-to: Your message of Fri, 30 Jan 1998 12:00:43 PST.
+     Date: Fri, 30 Jan 1998 12:42:32 PST
+     From: Vern Paxson <vern>
+
+     > lex.yy.c:1996: parse error before `='
+
+     This is the key, identifying this error.  (It may help to pinpoint
+     it by using flex -L, so it doesn't generate #line directives in its
+     output.)  I will bet you heavy money that you have a start condition
+     name that is also a variable name, or something like that; flex spits
+     out #define's for each start condition name, mapping them to a number,
+     so you can wind up with:
+
+     	%x foo
+     	%%
+     		...
+     	%%
+     	void bar()
+     		{
+     		int foo = 3;
+     		}
+
+     and the penultimate will turn into "int 1 = 3" after C preprocessing,
+     since flex will put "#define foo 1" in the generated scanner.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-73,  Next: unnamed-faq-74,  Prev: unnamed-faq-72,  Up: FAQ
+
+unnamed-faq-73
+==============
+
+     To: Maurice Petrie <mpetrie@infoscigroup.com>
+     Subject: Re: Lost flex .l file
+     In-reply-to: Your message of Mon, 02 Feb 1998 14:10:01 PST.
+     Date: Mon, 02 Feb 1998 11:15:12 PST
+     From: Vern Paxson <vern>
+
+     > I am curious as to
+     > whether there is a simple way to backtrack from the generated source to
+     > reproduce the lost list of tokens we are searching on.
+
+     In theory, it's straight-forward to go from the DFA representation
+     back to a regular-expression representation - the two are isomorphic.
+     In practice, a huge headache, because you have to unpack all the tables
+     back into a single DFA representation, and then write a program to munch
+     on that and translate it into an RE.
+
+     Sorry for the less-than-happy news ...
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-74,  Next: unnamed-faq-75,  Prev: unnamed-faq-73,  Up: FAQ
+
+unnamed-faq-74
+==============
+
+     To: jimmey@lexis-nexis.com (Jimmey Todd)
+     Subject: Re: Flex performance question
+     In-reply-to: Your message of Thu, 19 Feb 1998 11:01:17 PST.
+     Date: Thu, 19 Feb 1998 08:48:51 PST
+     From: Vern Paxson <vern>
+
+     > What I have found, is that the smaller the data chunk, the faster the
+     > program executes. This is the opposite of what I expected. Should this be
+     > happening this way?
+
+     This is exactly what will happen if your input file has embedded NULs.
+     From the man page:
+
+     A final note: flex is slow when matching NUL's, particularly
+     when  a  token  contains multiple NUL's.  It's best to write
+     rules which match short amounts of text if it's  anticipated
+     that the text will often include NUL's.
+
+     So that's the first thing to look for.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-75,  Next: unnamed-faq-76,  Prev: unnamed-faq-74,  Up: FAQ
+
+unnamed-faq-75
+==============
+
+     To: jimmey@lexis-nexis.com (Jimmey Todd)
+     Subject: Re: Flex performance question
+     In-reply-to: Your message of Thu, 19 Feb 1998 11:01:17 PST.
+     Date: Thu, 19 Feb 1998 15:42:25 PST
+     From: Vern Paxson <vern>
+
+     So there are several problems.
+
+     First, to go fast, you want to match as much text as possible, which
+     your scanners don't in the case that what they're scanning is *not*
+     a <RN> tag.  So you want a rule like:
+
+     	[^<]+
+
+     Second, C++ scanners are particularly slow if they're interactive,
+     which they are by default.  Using -B speeds it up by a factor of 3-4
+     on my workstation.
+
+     Third, C++ scanners that use the istream interface are slow, because
+     of how poorly implemented istream's are.  I built two versions of
+     the following scanner:
+
+     	%%
+     	.*\n
+     	.*
+     	%%
+
+     and the C version inhales a 2.5MB file on my workstation in 0.8 seconds.
+     The C++ istream version, using -B, takes 3.8 seconds.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-76,  Next: unnamed-faq-77,  Prev: unnamed-faq-75,  Up: FAQ
+
+unnamed-faq-76
+==============
+
+     To: "Frescatore, David (CRD, TAD)" <frescatore@exc01crdge.crd.ge.com>
+     Subject: Re: FLEX 2.5 & THE YEAR 2000
+     In-reply-to: Your message of Wed, 03 Jun 1998 11:26:22 PDT.
+     Date: Wed, 03 Jun 1998 10:22:26 PDT
+     From: Vern Paxson <vern>
+
+     > I am researching the Y2K problem with General Electric R&D
+     > and need to know if there are any known issues concerning
+     > the above mentioned software and Y2K regardless of version.
+
+     There shouldn't be, all it ever does with the date is ask the system
+     for it and then print it out.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-77,  Next: unnamed-faq-78,  Prev: unnamed-faq-76,  Up: FAQ
+
+unnamed-faq-77
+==============
+
+     To: "Hans Dermot Doran" <htd@ibhdoran.com>
+     Subject: Re: flex problem
+     In-reply-to: Your message of Wed, 15 Jul 1998 21:30:13 PDT.
+     Date: Tue, 21 Jul 1998 14:23:34 PDT
+     From: Vern Paxson <vern>
+
+     > To overcome this, I gets() the stdin into a string and lex the string. The
+     > string is lexed OK except that the end of string isn't lexed properly
+     > (yy_scan_string()), that is the lexer dosn't recognise the end of string.
+
+     Flex doesn't contain mechanisms for recognizing buffer endpoints.  But if
+     you use fgets instead (which you should anyway, to protect against buffer
+     overflows), then the final \n will be preserved in the string, and you can
+     scan that in order to find the end of the string.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-78,  Next: unnamed-faq-79,  Prev: unnamed-faq-77,  Up: FAQ
+
+unnamed-faq-78
+==============
+
+     To: soumen@almaden.ibm.com
+     Subject: Re: Flex++ 2.5.3 instance member vs. static member
+     In-reply-to: Your message of Mon, 27 Jul 1998 02:10:04 PDT.
+     Date: Tue, 28 Jul 1998 01:10:34 PDT
+     From: Vern Paxson <vern>
+
+     > %{
+     > int mylineno = 0;
+     > %}
+     > ws      [ \t]+
+     > alpha   [A-Za-z]
+     > dig     [0-9]
+     > %%
+     >
+     > Now you'd expect mylineno to be a member of each instance of class
+     > yyFlexLexer, but is this the case?  A look at the lex.yy.cc file seems to
+     > indicate otherwise; unless I am missing something the declaration of
+     > mylineno seems to be outside any class scope.
+     >
+     > How will this work if I want to run a multi-threaded application with each
+     > thread creating a FlexLexer instance?
+
+     Derive your own subclass and make mylineno a member variable of it.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-79,  Next: unnamed-faq-80,  Prev: unnamed-faq-78,  Up: FAQ
+
+unnamed-faq-79
+==============
+
+     To: Adoram Rogel <adoram@hybridge.com>
+     Subject: Re: More than 32K states change hangs
+     In-reply-to: Your message of Tue, 04 Aug 1998 16:55:39 PDT.
+     Date: Tue, 04 Aug 1998 22:28:45 PDT
+     From: Vern Paxson <vern>
+
+     > Vern Paxson,
+     >
+     > I followed your advice, posted on Usenet bu you, and emailed to me
+     > personally by you, on how to overcome the 32K states limit. I'm running
+     > on Linux machines.
+     > I took the full source of version 2.5.4 and did the following changes in
+     > flexdef.h:
+     > #define JAMSTATE -327660
+     > #define MAXIMUM_MNS 319990
+     > #define BAD_SUBSCRIPT -327670
+     > #define MAX_SHORT 327000
+     >
+     > and compiled.
+     > All looked fine, including check and bigcheck, so I installed.
+
+     Hmmm, you shouldn't increase MAX_SHORT, though looking through my email
+     archives I see that I did indeed recommend doing so.  Try setting it back
+     to 32700; that should suffice that you no longer need -Ca.  If it still
+     hangs, then the interesting question is - where?
+
+     > Compiling the same hanged program with a out-of-the-box (RedHat 4.2
+     > distribution of Linux)
+     > flex 2.5.4 binary works.
+
+     Since Linux comes with source code, you should diff it against what
+     you have to see what problems they missed.
+
+     > Should I always compile with the -Ca option now ? even short and simple
+     > filters ?
+
+     No, definitely not.  It's meant to be for those situations where you
+     absolutely must squeeze every last cycle out of your scanner.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-80,  Next: unnamed-faq-81,  Prev: unnamed-faq-79,  Up: FAQ
+
+unnamed-faq-80
+==============
+
+     To: "Schmackpfeffer, Craig" <Craig.Schmackpfeffer@usa.xerox.com>
+     Subject: Re: flex output for static code portion
+     In-reply-to: Your message of Tue, 11 Aug 1998 11:55:30 PDT.
+     Date: Mon, 17 Aug 1998 23:57:42 PDT
+     From: Vern Paxson <vern>
+
+     > I would like to use flex under the hood to generate a binary file
+     > containing the data structures that control the parse.
+
+     This has been on the wish-list for a long time.  In principle it's
+     straight-forward - you redirect mkdata() et al's I/O to another file,
+     and modify the skeleton to have a start-up function that slurps these
+     into dynamic arrays.  The concerns are (1) the scanner generation code
+     is hairy and full of corner cases, so it's easy to get surprised when
+     going down this path :-( ; and (2) being careful about buffering so
+     that when the tables change you make sure the scanner starts in the
+     correct state and reading at the right point in the input file.
+
+     > I was wondering if you know of anyone who has used flex in this way.
+
+     I don't - but it seems like a reasonable project to undertake (unlike
+     numerous other flex tweaks :-).
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-81,  Next: unnamed-faq-82,  Prev: unnamed-faq-80,  Up: FAQ
+
+unnamed-faq-81
+==============
+
+     Received: from 131.173.17.11 (131.173.17.11 [131.173.17.11])
+     	by ee.lbl.gov (8.9.1/8.9.1) with ESMTP id AAA03838
+     	for <vern@ee.lbl.gov>; Thu, 20 Aug 1998 00:47:57 -0700 (PDT)
+     Received: from hal.cl-ki.uni-osnabrueck.de (hal.cl-ki.Uni-Osnabrueck.DE [131.173.141.2])
+     	by deimos.rz.uni-osnabrueck.de (8.8.7/8.8.8) with ESMTP id JAA34694
+     	for <vern@ee.lbl.gov>; Thu, 20 Aug 1998 09:47:55 +0200
+     Received: (from georg@localhost) by hal.cl-ki.uni-osnabrueck.de (8.6.12/8.6.12) id JAA34834 for vern@ee.lbl.gov; Thu, 20 Aug 1998 09:47:54 +0200
+     From: Georg Rehm <georg@hal.cl-ki.uni-osnabrueck.de>
+     Message-Id: <199808200747.JAA34834@hal.cl-ki.uni-osnabrueck.de>
+     Subject: "flex scanner push-back overflow"
+     To: vern@ee.lbl.gov
+     Date: Thu, 20 Aug 1998 09:47:54 +0200 (MEST)
+     Reply-To: Georg.Rehm@CL-KI.Uni-Osnabrueck.DE
+     X-NoJunk: Do NOT send commercial mail, spam or ads to this address!
+     X-URL: http://www.cl-ki.uni-osnabrueck.de/~georg/
+     X-Mailer: ELM [version 2.4ME+ PL28 (25)]
+     MIME-Version: 1.0
+     Content-Type: text/plain; charset=US-ASCII
+     Content-Transfer-Encoding: 7bit
+
+     Hi Vern,
+
+     Yesterday, I encountered a strange problem: I use the macro processor m4
+     to include some lengthy lists into a .l file. Following is a flex macro
+     definition that causes some serious pain in my neck:
+
+     AUTHOR           ("A. Boucard / L. Boucard"|"A. Dastarac / M. Levent"|"A.Boucaud / L.Boucaud"|"Abderrahim Lamchichi"|"Achmat Dangor"|"Adeline Toullier"|"Adewale Maja-Pearce"|"Ahmed Ziri"|"Akram Ellyas"|"Alain Bihr"|"Alain Gresh"|"Alain Guillemoles"|"Alain Joxe"|"Alain Morice"|"Alain Renon"|"Alain Zecchini"|"Albert Memmi"|"Alberto Manguel"|"Alex De Waal"|"Alfonso Artico"| [...])
+
+     The complete list contains about 10kB. When I try to "flex" this file
+     (on a Solaris 2.6 machine, using a modified flex 2.5.4 (I only increased
+     some of the predefined values in flexdefs.h) I get the error:
+
+     myflex/flex -8  sentag.tmp.l
+     flex scanner push-back overflow
+
+     When I remove the slashes in the macro definition everything works fine.
+     As I understand it, the double quotes escape the slash-character so it
+     really means "/" and not "trailing context". Furthermore, I tried to
+     escape the slashes with backslashes, but with no use, the same error message
+     appeared when flexing the code.
+
+     Do you have an idea what's going on here?
+
+     Greetings from Germany,
+     	Georg
+     --
+     Georg Rehm                                     georg@cl-ki.uni-osnabrueck.de
+     Institute for Semantic Information Processing, University of Osnabrueck, FRG
+
+
+File: flex.info,  Node: unnamed-faq-82,  Next: unnamed-faq-83,  Prev: unnamed-faq-81,  Up: FAQ
+
+unnamed-faq-82
+==============
+
+     To: Georg.Rehm@CL-KI.Uni-Osnabrueck.DE
+     Subject: Re: "flex scanner push-back overflow"
+     In-reply-to: Your message of Thu, 20 Aug 1998 09:47:54 PDT.
+     Date: Thu, 20 Aug 1998 07:05:35 PDT
+     From: Vern Paxson <vern>
+
+     > myflex/flex -8  sentag.tmp.l
+     > flex scanner push-back overflow
+
+     Flex itself uses a flex scanner.  That scanner is running out of buffer
+     space when it tries to unput() the humongous macro you've defined.  When
+     you remove the '/'s, you make it small enough so that it fits in the buffer;
+     removing spaces would do the same thing.
+
+     The fix is to either rethink how come you're using such a big macro and
+     perhaps there's another/better way to do it; or to rebuild flex's own
+     scan.c with a larger value for
+
+     	#define YY_BUF_SIZE 16384
+
+     - Vern
+
+
+File: flex.info,  Node: unnamed-faq-83,  Next: unnamed-faq-84,  Prev: unnamed-faq-82,  Up: FAQ
+
+unnamed-faq-83
+==============
+
+     To: Jan Kort <jan@research.techforce.nl>
+     Subject: Re: Flex
+     In-reply-to: Your message of Fri, 04 Sep 1998 12:18:43 +0200.
+     Date: Sat, 05 Sep 1998 00:59:49 PDT
+     From: Vern Paxson <vern>
+
+     > %%
+     >
+     > "TEST1\n"       { fprintf(stderr, "TEST1\n"); yyless(5); }
+     > ^\n             { fprintf(stderr, "empty line\n"); }
+     > .               { }
+     > \n              { fprintf(stderr, "new line\n"); }
+     >
+     > %%
+     > -- input ---------------------------------------
+     > TEST1
+     > -- output --------------------------------------
+     > TEST1
+     > empty line
+     > ------------------------------------------------
+
+     IMHO, it's not clear whether or not this is in fact a bug.  It depends
+     on whether you view yyless() as backing up in the input stream, or as
+     pushing new characters onto the beginning of the input stream.  Flex
+     interprets it as the latter (for implementation convenience, I'll admit),
+     and so considers the newline as in fact matching at the beginning of a
+     line, as after all the last token scanned an entire line and so the
+     scanner is now at the beginning of a new line.
+
+     I agree that this is counter-intuitive for yyless(), given its
+     functional description (it's less so for unput(), depending on whether
+     you're unput()'ing new text or scanned text).  But I don't plan to
+     change it any time soon, as it's a pain to do so.  Consequently,
+     you do indeed need to use yy_set_bol() and YY_AT_BOL() to tweak
+     your scanner into the behavior you desire.
+
+     Sorry for the less-than-completely-satisfactory answer.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-84,  Next: unnamed-faq-85,  Prev: unnamed-faq-83,  Up: FAQ
+
+unnamed-faq-84
+==============
+
+     To: Patrick Krusenotto <krusenot@mac-info-link.de>
+     Subject: Re: Problems with restarting flex-2.5.2-generated scanner
+     In-reply-to: Your message of Thu, 24 Sep 1998 10:14:07 PDT.
+     Date: Thu, 24 Sep 1998 23:28:43 PDT
+     From: Vern Paxson <vern>
+
+     > I am using flex-2.5.2 and bison 1.25 for Solaris and I am desperately
+     > trying to make my scanner restart with a new file after my parser stops
+     > with a parse error. When my compiler restarts, the parser always
+     > receives the token after the token (in the old file!) that caused the
+     > parser error.
+
+     I suspect the problem is that your parser has read ahead in order
+     to attempt to resolve an ambiguity, and when it's restarted it picks
+     up with that token rather than reading a fresh one.  If you're using
+     yacc, then the special "error" production can sometimes be used to
+     consume tokens in an attempt to get the parser into a consistent state.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-85,  Next: unnamed-faq-86,  Prev: unnamed-faq-84,  Up: FAQ
+
+unnamed-faq-85
+==============
+
+     To: Henric Jungheim <junghelh@pe-nelson.com>
+     Subject: Re: flex 2.5.4a
+     In-reply-to: Your message of Tue, 27 Oct 1998 16:41:42 PST.
+     Date: Tue, 27 Oct 1998 16:50:14 PST
+     From: Vern Paxson <vern>
+
+     > This brings up a feature request:  How about a command line
+     > option to specify the filename when reading from stdin?  That way one
+     > doesn't need to create a temporary file in order to get the "#line"
+     > directives to make sense.
+
+     Use -o combined with -t (per the man page description of -o).
+
+     > P.S., Is there any simple way to use non-blocking IO to parse multiple
+     > streams?
+
+     Simple, no.
+
+     One approach might be to return a magic character on EWOULDBLOCK and
+     have a rule
+
+     	.*<magic-character>	// put back .*, eat magic character
+
+     This is off the top of my head, not sure it'll work.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-86,  Next: unnamed-faq-87,  Prev: unnamed-faq-85,  Up: FAQ
+
+unnamed-faq-86
+==============
+
+     To: "Repko, Billy D" <billy.d.repko@intel.com>
+     Subject: Re: Compiling scanners
+     In-reply-to: Your message of Wed, 13 Jan 1999 10:52:47 PST.
+     Date: Thu, 14 Jan 1999 00:25:30 PST
+     From: Vern Paxson <vern>
+
+     > It appears that maybe it cannot find the lfl library.
+
+     The Makefile in the distribution builds it, so you should have it.
+     It's exceedingly trivial, just a main() that calls yylex() and
+     a yyrap() that always returns 1.
+
+     > %%
+     >       \n      ++num_lines; ++num_chars;
+     >       .       ++num_chars;
+
+     You can't indent your rules like this - that's where the errors are coming
+     from.  Flex copies indented text to the output file, it's how you do things
+     like
+
+     	int num_lines_seen = 0;
+
+     to declare local variables.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-87,  Next: unnamed-faq-88,  Prev: unnamed-faq-86,  Up: FAQ
+
+unnamed-faq-87
+==============
+
+     To: Erick Branderhorst <Erick.Branderhorst@asml.nl>
+     Subject: Re: flex input buffer
+     In-reply-to: Your message of Tue, 09 Feb 1999 13:53:46 PST.
+     Date: Tue, 09 Feb 1999 21:03:37 PST
+     From: Vern Paxson <vern>
+
+     > In the flex.skl file the size of the default input buffers is set.  Can you
+     > explain why this size is set and why it is such a high number.
+
+     It's large to optimize performance when scanning large files.  You can
+     safely make it a lot lower if needed.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-88,  Next: unnamed-faq-90,  Prev: unnamed-faq-87,  Up: FAQ
+
+unnamed-faq-88
+==============
+
+     To: "Guido Minnen" <guidomi@cogs.susx.ac.uk>
+     Subject: Re: Flex error message
+     In-reply-to: Your message of Wed, 24 Feb 1999 15:31:46 PST.
+     Date: Thu, 25 Feb 1999 00:11:31 PST
+     From: Vern Paxson <vern>
+
+     > I'm extending a larger scanner written in Flex and I keep running into
+     > problems. More specifically, I get the error message:
+     > "flex: input rules are too complicated (>= 32000 NFA states)"
+
+     Increase the definitions in flexdef.h for:
+
+     #define JAMSTATE -32766 /* marks a reference to the state that always j
+     ams */
+     #define MAXIMUM_MNS 31999
+     #define BAD_SUBSCRIPT -32767
+
+     recompile everything, and it should all work.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-90,  Next: unnamed-faq-91,  Prev: unnamed-faq-88,  Up: FAQ
+
+unnamed-faq-90
+==============
+
+     To: "Dmitriy Goldobin" <gold@ems.chel.su>
+     Subject: Re: FLEX trouble
+     In-reply-to: Your message of Mon, 31 May 1999 18:44:49 PDT.
+     Date: Tue, 01 Jun 1999 00:15:07 PDT
+     From: Vern Paxson <vern>
+
+     >   I have a trouble with FLEX. Why rule "/*".*"*/" work properly,=20
+     > but rule "/*"(.|\n)*"*/" don't work ?
+
+     The second of these will have to scan the entire input stream (because
+     "(.|\n)*" matches an arbitrary amount of any text) in order to see if
+     it ends with "*/", terminating the comment.  That potentially will overflow
+     the input buffer.
+
+     >   More complex rule "/*"([^*]|(\*/[^/]))*"*/ give an error
+     > 'unrecognized rule'.
+
+     You can't use the '/' operator inside parentheses.  It's not clear
+     what "(a/b)*" actually means.
+
+     >   I now use workaround with state <comment>, but single-rule is
+     > better, i think.
+
+     Single-rule is nice but will always have the problem of either setting
+     restrictions on comments (like not allowing multi-line comments) and/or
+     running the risk of consuming the entire input stream, as noted above.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-91,  Next: unnamed-faq-92,  Prev: unnamed-faq-90,  Up: FAQ
+
+unnamed-faq-91
+==============
+
+     Received: from mc-qout4.whowhere.com (mc-qout4.whowhere.com [209.185.123.18])
+     	by ee.lbl.gov (8.9.3/8.9.3) with SMTP id IAA05100
+     	for <vern@ee.lbl.gov>; Tue, 15 Jun 1999 08:56:06 -0700 (PDT)
+     Received: from Unknown/Local ([?.?.?.?]) by my-deja.com; Tue Jun 15 08:55:43 1999
+     To: vern@ee.lbl.gov
+     Date: Tue, 15 Jun 1999 08:55:43 -0700
+     From: "Aki Niimura" <neko@my-deja.com>
+     Message-ID: <KNONDOHDOBGAEAAA@my-deja.com>
+     Mime-Version: 1.0
+     Cc:
+     X-Sent-Mail: on
+     Reply-To:
+     X-Mailer: MailCity Service
+     Subject: A question on flex C++ scanner
+     X-Sender-Ip: 12.72.207.61
+     Organization: My Deja Email  (http://www.my-deja.com:80)
+     Content-Type: text/plain; charset=us-ascii
+     Content-Transfer-Encoding: 7bit
+
+     Dear Dr. Paxon,
+
+     I have been using flex for years.
+     It works very well on many projects.
+     Most case, I used it to generate a scanner on C language.
+     However, one project I needed to generate  a scanner
+     on C++ lanuage. Thanks to your enhancement, flex did
+     the job.
+
+     Currently, I'm working on enhancing my previous project.
+     I need to deal with multiple input streams (recursive
+     inclusion) in this scanner (C++).
+     I did similar thing for another scanner (C) as you
+     explained in your documentation.
+
+     The generated scanner (C++) has necessary methods:
+     - switch_to_buffer(struct yy_buffer_state *b)
+     - yy_create_buffer(istream *is, int sz)
+     - yy_delete_buffer(struct yy_buffer_state *b)
+
+     However, I couldn't figure out how to access current
+     buffer (yy_current_buffer).
+
+     yy_current_buffer is a protected member of yyFlexLexer.
+     I can't access it directly.
+     Then, I thought yy_create_buffer() with is = 0 might
+     return current stream buffer. But it seems not as far
+     as I checked the source. (flex 2.5.4)
+
+     I went through the Web in addition to Flex documentation.
+     However, it hasn't been successful, so far.
+
+     It is not my intention to bother you, but, can you
+     comment about how to obtain the current stream buffer?
+
+     Your response would be highly appreciated.
+
+     Best regards,
+     Aki Niimura
+
+     --== Sent via Deja.com http://www.deja.com/ ==--
+     Share what you know. Learn what you don't.
+
+
+File: flex.info,  Node: unnamed-faq-92,  Next: unnamed-faq-93,  Prev: unnamed-faq-91,  Up: FAQ
+
+unnamed-faq-92
+==============
+
+     To: neko@my-deja.com
+     Subject: Re: A question on flex C++ scanner
+     In-reply-to: Your message of Tue, 15 Jun 1999 08:55:43 PDT.
+     Date: Tue, 15 Jun 1999 09:04:24 PDT
+     From: Vern Paxson <vern>
+
+     > However, I couldn't figure out how to access current
+     > buffer (yy_current_buffer).
+
+     Derive your own subclass from yyFlexLexer.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-93,  Next: unnamed-faq-94,  Prev: unnamed-faq-92,  Up: FAQ
+
+unnamed-faq-93
+==============
+
+     To: "Stones, Darren" <Darren.Stones@nectech.co.uk>
+     Subject: Re: You're the man to see?
+     In-reply-to: Your message of Wed, 23 Jun 1999 11:10:29 PDT.
+     Date: Wed, 23 Jun 1999 09:01:40 PDT
+     From: Vern Paxson <vern>
+
+     > I hope you can help me.  I am using Flex and Bison to produce an interpreted
+     > language.  However all goes well until I try to implement an IF statement or
+     > a WHILE.  I cannot get this to work as the parser parses all the conditions
+     > eg. the TRUE and FALSE conditons to check for a rule match.  So I cannot
+     > make a decision!!
+
+     You need to use the parser to build a parse tree (= abstract syntax trwee),
+     and when that's all done you recursively evaluate the tree, binding variables
+     to values at that time.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-94,  Next: unnamed-faq-95,  Prev: unnamed-faq-93,  Up: FAQ
+
+unnamed-faq-94
+==============
+
+     To: Petr Danecek <petr@ics.cas.cz>
+     Subject: Re: flex - question
+     In-reply-to: Your message of Mon, 28 Jun 1999 19:21:41 PDT.
+     Date: Fri, 02 Jul 1999 16:52:13 PDT
+     From: Vern Paxson <vern>
+
+     > file, it takes an enormous amount of time. It is funny, because the
+     > source code has only 12 rules!!! I think it looks like an exponencial
+     > growth.
+
+     Right, that's the problem - some patterns (those with a lot of
+     ambiguity, where yours has because at any given time the scanner can
+     be in the middle of all sorts of combinations of the different
+     rules) blow up exponentially.
+
+     For your rules, there is an easy fix.  Change the ".*" that comes fater
+     the directory name to "[^ ]*".  With that in place, the rules are no
+     longer nearly so ambiguous, because then once one of the directories
+     has been matched, no other can be matched (since they all require a
+     leading blank).
+
+     If that's not an acceptable solution, then you can enter a start state
+     to pick up the .*\n after each directory is matched.
+
+     Also note that for speed, you'll want to add a ".*" rule at the end,
+     otherwise rules that don't match any of the patterns will be matched
+     very slowly, a character at a time.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-95,  Next: unnamed-faq-96,  Prev: unnamed-faq-94,  Up: FAQ
+
+unnamed-faq-95
+==============
+
+     To: Tielman Koekemoer <tielman@spi.co.za>
+     Subject: Re: Please help.
+     In-reply-to: Your message of Thu, 08 Jul 1999 13:20:37 PDT.
+     Date: Thu, 08 Jul 1999 08:20:39 PDT
+     From: Vern Paxson <vern>
+
+     > I was hoping you could help me with my problem.
+     >
+     > I tried compiling (gnu)flex on a Solaris 2.4 machine
+     > but when I ran make (after configure) I got an error.
+     >
+     > --------------------------------------------------------------
+     > gcc -c -I. -I. -g -O parse.c
+     > ./flex -t -p  ./scan.l >scan.c
+     > sh: ./flex: not found
+     > *** Error code 1
+     > make: Fatal error: Command failed for target `scan.c'
+     > -------------------------------------------------------------
+     >
+     > What's strange to me is that I'm only
+     > trying to install flex now. I then edited the Makefile to
+     > and changed where it says "FLEX = flex" to "FLEX = lex"
+     > ( lex: the native Solaris one ) but then it complains about
+     > the "-p" option. Is there any way I can compile flex without
+     > using flex or lex?
+     >
+     > Thanks so much for your time.
+
+     You managed to step on the bootstrap sequence, which first copies
+     initscan.c to scan.c in order to build flex.  Try fetching a fresh
+     distribution from ftp.ee.lbl.gov.  (Or you can first try removing
+     ".bootstrap" and doing a make again.)
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-96,  Next: unnamed-faq-97,  Prev: unnamed-faq-95,  Up: FAQ
+
+unnamed-faq-96
+==============
+
+     To: Tielman Koekemoer <tielman@spi.co.za>
+     Subject: Re: Please help.
+     In-reply-to: Your message of Fri, 09 Jul 1999 09:16:14 PDT.
+     Date: Fri, 09 Jul 1999 00:27:20 PDT
+     From: Vern Paxson <vern>
+
+     > First I removed .bootstrap (and ran make) - no luck. I downloaded the
+     > software but I still have the same problem. Is there anything else I
+     > could try.
+
+     Try:
+
+     	cp initscan.c scan.c
+     	touch scan.c
+     	make scan.o
+
+     If this last tries to first build scan.c from scan.l using ./flex, then
+     your "make" is broken, in which case compile scan.c to scan.o by hand.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-97,  Next: unnamed-faq-98,  Prev: unnamed-faq-96,  Up: FAQ
+
+unnamed-faq-97
+==============
+
+     To: Sumanth Kamenani <skamenan@crl.nmsu.edu>
+     Subject: Re: Error
+     In-reply-to: Your message of Mon, 19 Jul 1999 23:08:41 PDT.
+     Date: Tue, 20 Jul 1999 00:18:26 PDT
+     From: Vern Paxson <vern>
+
+     > I am getting a compilation error. The error is given as "unknown symbol- yylex".
+
+     The parser relies on calling yylex(), but you're instead using the C++ scanning
+     class, so you need to supply a yylex() "glue" function that calls an instance
+     scanner of the scanner (e.g., "scanner->yylex()").
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-98,  Next: unnamed-faq-99,  Prev: unnamed-faq-97,  Up: FAQ
+
+unnamed-faq-98
+==============
+
+     To: daniel@synchrods.synchrods.COM (Daniel Senderowicz)
+     Subject: Re: lex
+     In-reply-to: Your message of Mon, 22 Nov 1999 11:19:04 PST.
+     Date: Tue, 23 Nov 1999 15:54:30 PST
+     From: Vern Paxson <vern>
+
+     Well, your problem is the
+
+     switch (yybgin-yysvec-1) {      /* witchcraft */
+
+     at the beginning of lex rules.  "witchcraft" == "non-portable".  It's
+     assuming knowledge of the AT&T lex's internal variables.
+
+     For flex, you can probably do the equivalent using a switch on YYSTATE.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-99,  Next: unnamed-faq-100,  Prev: unnamed-faq-98,  Up: FAQ
+
+unnamed-faq-99
+==============
+
+     To: archow@hss.hns.com
+     Subject: Re: Regarding distribution of flex and yacc based grammars
+     In-reply-to: Your message of Sun, 19 Dec 1999 17:50:24 +0530.
+     Date: Wed, 22 Dec 1999 01:56:24 PST
+     From: Vern Paxson <vern>
+
+     > When we provide the customer with an object code distribution, is it
+     > necessary for us to provide source
+     > for the generated C files from flex and bison since they are generated by
+     > flex and bison ?
+
+     For flex, no.  I don't know what the current state of this is for bison.
+
+     > Also, is there any requrirement for us to neccessarily  provide source for
+     > the grammar files which are fed into flex and bison ?
+
+     Again, for flex, no.
+
+     See the file "COPYING" in the flex distribution for the legalese.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-100,  Next: unnamed-faq-101,  Prev: unnamed-faq-99,  Up: FAQ
+
+unnamed-faq-100
+===============
+
+     To: Martin Gallwey <gallweym@hyperion.moe.ul.ie>
+     Subject: Re: Flex, and self referencing rules
+     In-reply-to: Your message of Sun, 20 Feb 2000 01:01:21 PST.
+     Date: Sat, 19 Feb 2000 18:33:16 PST
+     From: Vern Paxson <vern>
+
+     > However, I do not use unput anywhere. I do use self-referencing
+     > rules like this:
+     >
+     > UnaryExpr               ({UnionExpr})|("-"{UnaryExpr})
+
+     You can't do this - flex is *not* a parser like yacc (which does indeed
+     allow recursion), it is a scanner that's confined to regular expressions.
+
+     		Vern
+
+
+File: flex.info,  Node: unnamed-faq-101,  Next: What is the difference between YYLEX_PARAM and YY_DECL?,  Prev: unnamed-faq-100,  Up: FAQ
+
+unnamed-faq-101
+===============
+
+     To: slg3@lehigh.edu (SAMUEL L. GULDEN)
+     Subject: Re: Flex problem
+     In-reply-to: Your message of Thu, 02 Mar 2000 12:29:04 PST.
+     Date: Thu, 02 Mar 2000 23:00:46 PST
+     From: Vern Paxson <vern>
+
+     If this is exactly your program:
+
+     > digit [0-9]
+     > digits {digit}+
+     > whitespace [ \t\n]+
+     >
+     > %%
+     > "[" { printf("open_brac\n");}
+     > "]" { printf("close_brac\n");}
+     > "+" { printf("addop\n");}
+     > "*" { printf("multop\n");}
+     > {digits} { printf("NUMBER = %s\n", yytext);}
+     > whitespace ;
+
+     then the problem is that the last rule needs to be "{whitespace}" !
+
+     		Vern
+
+
+File: flex.info,  Node: What is the difference between YYLEX_PARAM and YY_DECL?,  Next: Why do I get "conflicting types for yylex" error?,  Prev: unnamed-faq-101,  Up: FAQ
+
+What is the difference between YYLEX_PARAM and YY_DECL?
+=======================================================
+
+YYLEX_PARAM is not a flex symbol.  It is for Bison.  It tells Bison to
+pass extra params when it calls yylex() from the parser.
+
+   YY_DECL is the Flex declaration of yylex.  The default is similar to
+this:
+
+     #define int yy_lex ()
+
+
+File: flex.info,  Node: Why do I get "conflicting types for yylex" error?,  Next: How do I access the values set in a Flex action from within a Bison action?,  Prev: What is the difference between YYLEX_PARAM and YY_DECL?,  Up: FAQ
+
+Why do I get "conflicting types for yylex" error?
+=================================================
+
+This is a compiler error regarding a generated Bison parser, not a Flex
+scanner.  It means you need a prototype of yylex() in the top of the
+Bison file.  Be sure the prototype matches YY_DECL.
+
+
+File: flex.info,  Node: How do I access the values set in a Flex action from within a Bison action?,  Prev: Why do I get "conflicting types for yylex" error?,  Up: FAQ
+
+How do I access the values set in a Flex action from within a Bison action?
+===========================================================================
+
+With $1, $2, $3, etc.  These are called "Semantic Values" in the Bison
+manual.  See *note (bison)Top::.
+
+
+File: flex.info,  Node: Appendices,  Next: Indices,  Prev: FAQ,  Up: Top
+
+Appendix A Appendices
+*********************
+
+* Menu:
+
+* Makefiles and Flex::          
+* Bison Bridge::                
+* M4 Dependency::               
+* Common Patterns::               
+
+
+File: flex.info,  Node: Makefiles and Flex,  Next: Bison Bridge,  Prev: Appendices,  Up: Appendices
+
+A.1 Makefiles and Flex
+======================
+
+In this appendix, we provide tips for writing Makefiles to build your
+scanners.
+
+   In a traditional build environment, we say that the '.c' files are
+the sources, and the '.o' files are the intermediate files.  When using
+'flex', however, the '.l' files are the sources, and the generated '.c'
+files (along with the '.o' files) are the intermediate files.  This
+requires you to carefully plan your Makefile.
+
+   Modern 'make' programs understand that 'foo.l' is intended to
+generate 'lex.yy.c' or 'foo.c', and will behave accordingly(1)(2).  The
+following Makefile does not explicitly instruct 'make' how to build
+'foo.c' from 'foo.l'.  Instead, it relies on the implicit rules of the
+'make' program to build the intermediate file, 'scan.c':
+
+         # Basic Makefile -- relies on implicit rules
+         # Creates "myprogram" from "scan.l" and "myprogram.c"
+         #
+         LEX=flex
+         myprogram: scan.o myprogram.o
+         scan.o: scan.l
+
+
+   For simple cases, the above may be sufficient.  For other cases, you
+may have to explicitly instruct 'make' how to build your scanner.  The
+following is an example of a Makefile containing explicit rules:
+
+         # Basic Makefile -- provides explicit rules
+         # Creates "myprogram" from "scan.l" and "myprogram.c"
+         #
+         LEX=flex
+         myprogram: scan.o myprogram.o
+                 $(CC) -o $@  $(LDFLAGS) $^
+
+         myprogram.o: myprogram.c
+                 $(CC) $(CPPFLAGS) $(CFLAGS) -o $@ -c $^
+
+         scan.o: scan.c
+                 $(CC) $(CPPFLAGS) $(CFLAGS) -o $@ -c $^
+
+         scan.c: scan.l
+                 $(LEX) $(LFLAGS) -o $@ $^
+
+         clean:
+                 $(RM) *.o scan.c
+
+
+   Notice in the above example that 'scan.c' is in the 'clean' target.
+This is because we consider the file 'scan.c' to be an intermediate
+file.
+
+   Finally, we provide a realistic example of a 'flex' scanner used with
+a 'bison' parser(3).  There is a tricky problem we have to deal with.
+Since a 'flex' scanner will typically include a header file (e.g.,
+'y.tab.h') generated by the parser, we need to be sure that the header
+file is generated BEFORE the scanner is compiled.  We handle this case
+in the following example:
+
+         # Makefile example -- scanner and parser.
+         # Creates "myprogram" from "scan.l", "parse.y", and "myprogram.c"
+         #
+         LEX     = flex
+         YACC    = bison -y
+         YFLAGS  = -d
+         objects = scan.o parse.o myprogram.o
+
+         myprogram: $(objects)
+         scan.o: scan.l parse.c
+         parse.o: parse.y
+         myprogram.o: myprogram.c
+
+
+   In the above example, notice the line,
+
+         scan.o: scan.l parse.c
+
+   , which lists the file 'parse.c' (the generated parser) as a
+dependency of 'scan.o'.  We want to ensure that the parser is created
+before the scanner is compiled, and the above line seems to do the
+trick.  Feel free to experiment with your specific implementation of
+'make'.
+
+   For more details on writing Makefiles, see *note (make)Top::.
+
+   ---------- Footnotes ----------
+
+   (1) GNU 'make' and GNU 'automake' are two such programs that provide
+implicit rules for flex-generated scanners.
+
+   (2) GNU 'automake' may generate code to execute flex in
+lex-compatible mode, or to stdout.  If this is not what you want, then
+you should provide an explicit rule in your Makefile.am
+
+   (3) This example also applies to yacc parsers.
+
+
+File: flex.info,  Node: Bison Bridge,  Next: M4 Dependency,  Prev: Makefiles and Flex,  Up: Appendices
+
+A.2 C Scanners with Bison Parsers
+=================================
+
+This section describes the 'flex' features useful when integrating
+'flex' with 'GNU bison'(1).  Skip this section if you are not using
+'bison' with your scanner.  Here we discuss only the 'flex' half of the
+'flex' and 'bison' pair.  We do not discuss 'bison' in any detail.  For
+more information about generating 'bison' parsers, see *note
+(bison)Top::.
+
+   A compatible 'bison' scanner is generated by declaring '%option
+bison-bridge' or by supplying '--bison-bridge' when invoking 'flex' from
+the command line.  This instructs 'flex' that the macro 'yylval' may be
+used.  The data type for 'yylval', 'YYSTYPE', is typically defined in a
+header file, included in section 1 of the 'flex' input file.  For a list
+of functions and macros available, *Note bison-functions::.
+
+   The declaration of yylex becomes,
+
+           int yylex ( YYSTYPE * lvalp, yyscan_t scanner );
+
+   If '%option bison-locations' is specified, then the declaration
+becomes,
+
+           int yylex ( YYSTYPE * lvalp, YYLTYPE * llocp, yyscan_t scanner );
+
+   Note that the macros 'yylval' and 'yylloc' evaluate to pointers.
+Support for 'yylloc' is optional in 'bison', so it is optional in 'flex'
+as well.  The following is an example of a 'flex' scanner that is
+compatible with 'bison'.
+
+         /* Scanner for "C" assignment statements... sort of. */
+         %{
+         #include "y.tab.h"  /* Generated by bison. */
+         %}
+
+         %option bison-bridge bison-locations
+         %
+
+         [[:digit:]]+  { yylval->num = atoi(yytext);   return NUMBER;}
+         [[:alnum:]]+  { yylval->str = strdup(yytext); return STRING;}
+         "="|";"       { return yytext[0];}
+         .  {}
+         %
+
+   As you can see, there really is no magic here.  We just use 'yylval'
+as we would any other variable.  The data type of 'yylval' is generated
+by 'bison', and included in the file 'y.tab.h'.  Here is the
+corresponding 'bison' parser:
+
+         /* Parser to convert "C" assignments to lisp. */
+         %{
+         /* Pass the argument to yyparse through to yylex. */
+         #define YYPARSE_PARAM scanner
+         #define YYLEX_PARAM   scanner
+         %}
+         %locations
+         %pure_parser
+         %union {
+             int num;
+             char* str;
+         }
+         %token <str> STRING
+         %token <num> NUMBER
+         %%
+         assignment:
+             STRING '=' NUMBER ';' {
+                 printf( "(setf %s %d)", $1, $3 );
+            }
+         ;
+
+   ---------- Footnotes ----------
+
+   (1) The features described here are purely optional, and are by no
+means the only way to use flex with bison.  We merely provide some glue
+to ease development of your parser-scanner pair.
+
+
+File: flex.info,  Node: M4 Dependency,  Next: Common Patterns,  Prev: Bison Bridge,  Up: Appendices
+
+A.3 M4 Dependency
+=================
+
+The macro processor 'm4'(1) must be installed wherever flex is
+installed.  'flex' invokes 'm4', found by searching the directories in
+the 'PATH' environment variable.  Any code you place in section 1 or in
+the actions will be sent through m4.  Please follow these rules to
+protect your code from unwanted 'm4' processing.
+
+   * Do not use symbols that begin with, 'm4_', such as, 'm4_define', or
+     'm4_include', since those are reserved for 'm4' macro names.  If
+     for some reason you need m4_ as a prefix, use a preprocessor
+     #define to get your symbol past m4 unmangled.
+
+   * Do not use the strings '[[' or ']]' anywhere in your code.  The
+     former is not valid in C, except within comments and strings, but
+     the latter is valid in code such as 'x[y[z]]'.  The solution is
+     simple.  To get the literal string '"]]"', use '"]""]"'.  To get
+     the array notation 'x[y[z]]', use 'x[y[z] ]'.  Flex will attempt to
+     detect these sequences in user code, and escape them.  However,
+     it's best to avoid this complexity where possible, by removing such
+     sequences from your code.
+
+   'm4' is only required at the time you run 'flex'.  The generated
+scanner is ordinary C or C++, and does _not_ require 'm4'.
+
+   ---------- Footnotes ----------
+
+   (1) The use of m4 is subject to change in future revisions of flex.
+It is not part of the public API of flex.  Do not depend on it.
+
+
+File: flex.info,  Node: Common Patterns,  Prev: M4 Dependency,  Up: Appendices
+
+A.4 Common Patterns
+===================
+
+This appendix provides examples of common regular expressions you might
+use in your scanner.
+
+* Menu:
+
+* Numbers::         
+* Identifiers::         
+* Quoted Constructs::       
+* Addresses::       
+
+
+File: flex.info,  Node: Numbers,  Next: Identifiers,  Up: Common Patterns
+
+A.4.1 Numbers
+-------------
+
+C99 decimal constant
+     '([[:digit:]]{-}[0])[[:digit:]]*'
+
+C99 hexadecimal constant
+     '0[xX][[:xdigit:]]+'
+
+C99 octal constant
+     '0[01234567]*'
+
+C99 floating point constant
+      {dseq}      ([[:digit:]]+)
+      {dseq_opt}  ([[:digit:]]*)
+      {frac}      (({dseq_opt}"."{dseq})|{dseq}".")
+      {exp}       ([eE][+-]?{dseq})
+      {exp_opt}   ({exp}?)
+      {fsuff}     [flFL]
+      {fsuff_opt} ({fsuff}?)
+      {hpref}     (0[xX])
+      {hdseq}     ([[:xdigit:]]+)
+      {hdseq_opt} ([[:xdigit:]]*)
+      {hfrac}     (({hdseq_opt}"."{hdseq})|({hdseq}"."))
+      {bexp}      ([pP][+-]?{dseq})
+      {dfc}       (({frac}{exp_opt}{fsuff_opt})|({dseq}{exp}{fsuff_opt}))
+      {hfc}       (({hpref}{hfrac}{bexp}{fsuff_opt})|({hpref}{hdseq}{bexp}{fsuff_opt}))
+
+      {c99_floating_point_constant}  ({dfc}|{hfc})
+
+     See C99 section 6.4.4.2 for the gory details.
+
+
+File: flex.info,  Node: Identifiers,  Next: Quoted Constructs,  Prev: Numbers,  Up: Common Patterns
+
+A.4.2 Identifiers
+-----------------
+
+C99 Identifier
+     ucn        ((\\u([[:xdigit:]]{4}))|(\\U([[:xdigit:]]{8})))
+     nondigit    [_[:alpha:]]
+     c99_id     ([_[:alpha:]]|{ucn})([_[:alnum:]]|{ucn})*
+
+     Technically, the above pattern does not encompass all possible C99
+     identifiers, since C99 allows for "implementation-defined"
+     characters.  In practice, C compilers follow the above pattern,
+     with the addition of the '$' character.
+
+UTF-8 Encoded Unicode Code Point
+     [\x09\x0A\x0D\x20-\x7E]|[\xC2-\xDF][\x80-\xBF]|\xE0[\xA0-\xBF][\x80-\xBF]|[\xE1-\xEC\xEE\xEF]([\x80-\xBF]{2})|\xED[\x80-\x9F][\x80-\xBF]|\xF0[\x90-\xBF]([\x80-\xBF]{2})|[\xF1-\xF3]([\x80-\xBF]{3})|\xF4[\x80-\x8F]([\x80-\xBF]{2})
+
+
+File: flex.info,  Node: Quoted Constructs,  Next: Addresses,  Prev: Identifiers,  Up: Common Patterns
+
+A.4.3 Quoted Constructs
+-----------------------
+
+C99 String Literal
+     'L?\"([^\"\\\n]|(\\['\"?\\abfnrtv])|(\\([0123456]{1,3}))|(\\x[[:xdigit:]]+)|(\\u([[:xdigit:]]{4}))|(\\U([[:xdigit:]]{8})))*\"'
+
+C99 Comment
+     '("/*"([^*]|"*"[^/])*"*/")|("/"(\\\n)*"/"[^\n]*)'
+
+     Note that in C99, a '//'-style comment may be split across lines,
+     and, contrary to popular belief, does not include the trailing '\n'
+     character.
+
+     A better way to scan '/* */' comments is by line, rather than
+     matching possibly huge comments all at once.  This will allow you
+     to scan comments of unlimited length, as long as line breaks appear
+     at sane intervals.  This is also more efficient when used with
+     automatic line number processing.  *Note option-yylineno::.
+
+     <INITIAL>{
+         "/*"      BEGIN(COMMENT);
+     }
+     <COMMENT>{
+         "*/"      BEGIN(0);
+         [^*\n]+   ;
+         "*"[^/]   ;
+         \n        ;
+     }
+
+
+File: flex.info,  Node: Addresses,  Prev: Quoted Constructs,  Up: Common Patterns
+
+A.4.4 Addresses
+---------------
+
+IPv4 Address
+     dec-octet     [0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5]
+     IPv4address   {dec-octet}\.{dec-octet}\.{dec-octet}\.{dec-octet}
+
+IPv6 Address
+     h16           [0-9A-Fa-f]{1,4}
+     ls32          {h16}:{h16}|{IPv4address}
+     IPv6address   ({h16}:){6}{ls32}|
+                   ::({h16}:){5}{ls32}|
+                   ({h16})?::({h16}:){4}{ls32}|
+                   (({h16}:){0,1}{h16})?::({h16}:){3}{ls32}|
+                   (({h16}:){0,2}{h16})?::({h16}:){2}{ls32}|
+                   (({h16}:){0,3}{h16})?::{h16}:{ls32}|
+                   (({h16}:){0,4}{h16})?::{ls32}|
+                   (({h16}:){0,5}{h16})?::{h16}|
+                   (({h16}:){0,6}{h16})?::
+
+     See RFC 2373 (http://www.ietf.org/rfc/rfc2373.txt) for details.
+     Note that you have to fold the definition of 'IPv6address' into one
+     line and that it also matches the "unspecified address" "::".
+
+URI
+     '(([^:/?#]+):)?("//"([^/?#]*))?([^?#]*)(\?([^#]*))?(#(.*))?'
+
+     This pattern is nearly useless, since it allows just about any
+     character to appear in a URI, including spaces and control
+     characters.  See RFC 2396 (http://www.ietf.org/rfc/rfc2396.txt) for
+     details.
+
+
+File: flex.info,  Node: Indices,  Prev: Appendices,  Up: Top
+
+Indices
+*******
+
+* Menu:
+
+* Concept Index::               
+* Index of Functions and Macros::  
+* Index of Variables::          
+* Index of Data Types::         
+* Index of Hooks::              
+* Index of Scanner Options::    
+
+
+File: flex.info,  Node: Concept Index,  Next: Index of Functions and Macros,  Prev: Indices,  Up: Indices
+
+Concept Index
+=============
+
+