# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # ---------------------------------------------------------------------- # $Id: Makefile.am,v 1.52 2007/02/25 22:28:05 stevecheng Exp $ # # This Makefile builds the documentation for docbook2X in various # formats. # # Unfortunately, you must not use VPATH builds if you want # the converted documentation to end up in the right place # for the docbook2X distribution. (It's an automake limitation # that takes too much effort to work around.) # # ---------------------------------------------------------------------- # # Common defines for building documentation # srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/docbuild.mk subdir = doc ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/utf8trans/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = INFO_DEPS = $(srcdir)/docbook2X.info am__TEXINFO_TEX_DIR = $(srcdir) DVIS = docbook2X.dvi PDFS = docbook2X.pdf PSS = docbook2X.ps HTMLS = docbook2X.html TEXINFOS = docbook2X.texi TEXI2DVI = texi2dvi TEXI2PDF = $(TEXI2DVI) --pdf --batch MAKEINFOHTML = $(MAKEINFO) --html AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) DVIPS = dvips am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \ "$(DESTDIR)$(htmldir)" man1dir = $(mandir)/man1 NROFF = nroff MANS = $(man_MANS) am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; htmlDATA_INSTALL = $(INSTALL_DATA) DATA = $(html_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ GROFF = @GROFF@ HAVE_GROFF_FALSE = @HAVE_GROFF_FALSE@ HAVE_GROFF_TRUE = @HAVE_GROFF_TRUE@ HAVE_HTML_XSL_FALSE = @HAVE_HTML_XSL_FALSE@ HAVE_HTML_XSL_TRUE = @HAVE_HTML_XSL_TRUE@ HAVE_TIDY_FALSE = @HAVE_TIDY_FALSE@ HAVE_TIDY_TRUE = @HAVE_TIDY_TRUE@ HAVE_XMLLINT_FALSE = @HAVE_XMLLINT_FALSE@ HAVE_XMLLINT_TRUE = @HAVE_XMLLINT_TRUE@ ICONV = @ICONV@ INSTALLED_CHARMAP_ROFF = @INSTALLED_CHARMAP_ROFF@ INSTALLED_CHARMAP_TEXI = @INSTALLED_CHARMAP_TEXI@ INSTALLED_DB2X_MANXML = @INSTALLED_DB2X_MANXML@ INSTALLED_DB2X_TEXIXML = @INSTALLED_DB2X_TEXIXML@ INSTALLED_DB2X_XSLTPROC = @INSTALLED_DB2X_XSLTPROC@ INSTALLED_SGML2XML_ISOENT = @INSTALLED_SGML2XML_ISOENT@ INSTALLED_STYLESHEETS_CATALOG = @INSTALLED_STYLESHEETS_CATALOG@ INSTALLED_UTF8TRANS = @INSTALLED_UTF8TRANS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ JAVA = @JAVA@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ OBJEXT = @OBJEXT@ OSX = @OSX@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ RESOLVER_JARS = @RESOLVER_JARS@ SAXON_JARS = @SAXON_JARS@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ SX = @SX@ TIDY = @TIDY@ VERSION = @VERSION@ XALAN_JARS = @XALAN_JARS@ XMLLINT = @XMLLINT@ XSLTPROC = @XSLTPROC@ XSLT_PROCESSOR = @XSLT_PROCESSOR@ ac_ct_CC = @ac_ct_CC@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ # ---------------------------------------------------------------------- # # Install (automake) # htmldir = $(datadir)/doc/docbook2X includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ db2x_perl = $(PERL) # Location of docbook2X programs stylesheets_catalog = $(top_srcdir)/xslt/catalog.xml utf8trans = $(top_builddir)/utf8trans/utf8trans db2x_texixml = $(db2x_perl) $(top_builddir)/perl/db2x_texixml --utf8trans-program=$(utf8trans) --utf8trans-map=$(top_srcdir)/charmaps/texi.charmap db2x_manxml = $(db2x_perl) $(top_builddir)/perl/db2x_manxml --utf8trans-program=$(utf8trans) --utf8trans-map=$(top_srcdir)/charmaps/roff.charmap db2x_xsltproc = $(top_builddir)/perl/db2x_xsltproc -C $(stylesheets_catalog) # ---------------------------------------------------------------------- # # Document info # # Stylesheets XSLT_MAN = $(srcdir)/ss-man.xsl XSLT_TEXI = $(srcdir)/ss-texinfo.xsl XSLT_HTML = $(srcdir)/ss-html.xsl XML_FILES = docbook2X.xml \ changes.xml charsets.xml design-notes.xml faq.xml manpages.xml \ quickstart.xml texinfo.xml textents.xml todo.xml xsltproc.xml \ perf.xml testing.xml install.xml \ i18n-system-property/i18n-system-property.xml HTML_FILES = changes.html charsets.html cindex.html design-notes.html \ db2x_manxml.html db2x_texixml.html db2x_xsltproc.html \ sgml2xml-isoent.html docbook2X.html faq.html manpages.html \ texinfo.html todo.html utf8trans.html xsltproc.html \ performance.html testing.html install.html dependencies.html \ docbook2man.html docbook2texi.html MAN_FILES = db2x_manxml.1 db2x_texixml.1 db2x_xsltproc.1 utf8trans.1 \ docbook2man.1 docbook2texi.1 sgml2xml-isoent.1 INFO_FILES = docbook2X.info TEXI_FILES = docbook2X.texi XSL_FILES = ss-man.xsl ss-texinfo.xsl ss-html.xsl DOC = docbook2X DOC_XML = $(DOC).xml # ---------------------------------------------------------------------- # # Validation # @HAVE_XMLLINT_TRUE@DOC_VAL = .$(DOC).valid @HAVE_XMLLINT_FALSE@DOC_DEP = $(XML_FILES) @HAVE_XMLLINT_TRUE@DOC_DEP = $(DOC_VAL) # ---------------------------------------------------------------------- # # Distribution (automake) # EXTRA_DIST = $(XML_FILES) install2.xml $(MAN_FILES) $(HTML_FILES) \ $(XSL_FILES) docbook2X.css \ $(DOC).mxml $(DOC).txml .$(DOC).valid # We include the last three files in the distribution, even though # they are auto-generated, so that we don't trigger unnecessary # rebuilding of the documentation on the user's end. # Don't include big ass texinfo.tex AUTOMAKE_OPTIONS = no-texinfo.tex man_MANS = $(MAN_FILES) html_DATA = $(HTML_FILES) info_TEXINFOS = docbook2X.texi # ---------------------------------------------------------------------- # # Clean (automake) # MAINTAINERCLEANFILES = $(MAN_FILES) $(HTML_FILES) \ $(INFO_FILES) $(TEXI_FILES) \ $(DOC).mxml $(DOC).txml $(DOC_VAL) all: all-am .SUFFIXES: .SUFFIXES: .dvi .html .info .pdf .ps .texi $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/docbuild.mk $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh .texi.info: restore=: && backupdir="$(am__leading_dot)am$$$$" && \ am__cwd=`pwd` && cd $(srcdir) && \ rm -rf $$backupdir && mkdir $$backupdir && \ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ cd "$$am__cwd"; \ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $@ $<; \ then \ rc=0; \ cd $(srcdir); \ else \ rc=$$?; \ cd $(srcdir) && \ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ fi; \ rm -rf $$backupdir; exit $$rc .texi.dvi: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2DVI) $< .texi.pdf: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ $(TEXI2PDF) $< .texi.html: rm -rf $(@:.html=.htp) if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $(@:.html=.htp) $<; \ then \ rm -rf $@; \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ else \ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ exit 1; \ fi $(srcdir)/docbook2X.info: docbook2X.texi docbook2X.dvi: docbook2X.texi docbook2X.pdf: docbook2X.texi docbook2X.html: docbook2X.texi .dvi.ps: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ $(DVIPS) -o $@ $< uninstall-info-am: @$(PRE_UNINSTALL) @if (install-info --version && \ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ done; \ else :; fi @$(NORMAL_UNINSTALL) @list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ (if cd "$(DESTDIR)$(infodir)"; then \ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ else :; fi); \ done dist-info: $(INFO_DEPS) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for base in $$list; do \ case $$base in \ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$base; then d=.; else d=$(srcdir); fi; \ base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \ for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \ if test -f $$file; then \ relfile=`expr "$$file" : "$$d/\(.*\)"`; \ test -f $(distdir)/$$relfile || \ cp -p $$file $(distdir)/$$relfile; \ else :; fi; \ done; \ done mostlyclean-aminfo: -rm -rf docbook2X.aux docbook2X.cp docbook2X.cps docbook2X.fn docbook2X.fns \ docbook2X.ky docbook2X.kys docbook2X.log docbook2X.pg \ docbook2X.pgs docbook2X.tmp docbook2X.toc docbook2X.tp \ docbook2X.tps docbook2X.vr docbook2X.vrs docbook2X.dvi \ docbook2X.pdf docbook2X.ps docbook2X.html maintainer-clean-aminfo: @list='$(INFO_DEPS)'; for i in $$list; do \ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ done install-man1: $(man1_MANS) $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ done uninstall-man1: @$(NORMAL_UNINSTALL) @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ done install-htmlDATA: $(html_DATA) @$(NORMAL_INSTALL) test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)" @list='$(html_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(htmlDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \ $(htmlDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \ done uninstall-htmlDATA: @$(NORMAL_UNINSTALL) @list='$(html_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(htmldir)/$$f'"; \ rm -f "$(DESTDIR)$(htmldir)/$$f"; \ done tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) $(mkdir_p) $(distdir)/.. $(distdir)/i18n-system-property @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-info check-am: all-am check: check-am all-am: Makefile $(INFO_DEPS) $(MANS) $(DATA) installdirs: for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(htmldir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: $(DVIS) html-am: $(HTMLS) info-am: $(INFO_DEPS) install-data-am: install-htmlDATA install-info-am install-man install-exec-am: install-info: install-info-am install-info-am: $(INFO_DEPS) @$(NORMAL_INSTALL) test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)" @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$file; then d=.; else d=$(srcdir); fi; \ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ if test -f $$ifile; then \ relfile=`echo "$$ifile" | sed 's|^.*/||'`; \ echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \ $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \ else : ; fi; \ done; \ done @$(POST_INSTALL) @if (install-info --version && \ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ done; \ else : ; fi install-man: install-man1 installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-aminfo \ maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-aminfo mostlyclean-generic pdf: pdf-am pdf-am: $(PDFS) ps: ps-am ps-am: $(PSS) uninstall-am: uninstall-htmlDATA uninstall-info-am uninstall-man uninstall-man: uninstall-man1 .PHONY: all all-am check check-am clean clean-generic dist-info \ distclean distclean-generic distdir dvi dvi-am html html-am \ info info-am install install-am install-data install-data-am \ install-exec install-exec-am install-htmlDATA install-info \ install-info-am install-man install-man1 install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-aminfo maintainer-clean-generic mostlyclean \ mostlyclean-aminfo mostlyclean-generic pdf pdf-am ps ps-am \ uninstall uninstall-am uninstall-htmlDATA uninstall-info-am \ uninstall-man uninstall-man1 @HAVE_XMLLINT_TRUE@$(DOC_VAL): $(XML_FILES) @HAVE_XMLLINT_TRUE@ $(XMLLINT) --noout --valid $< @HAVE_XMLLINT_TRUE@ touch $(DOC_VAL) @HAVE_XMLLINT_TRUE@validate: $(DOC_VAL) # ---------------------------------------------------------------------- # # User targets # .PHONY: all html man texi all: html man info html: $(DOC).html man: $(MAN_FILES) texi: $(DOC).texi info: $(DOC).info # ---------------------------------------------------------------------- # # HTML conversion # @HAVE_HTML_XSL_TRUE@$(HTML_FILES): $(DOC_XML) $(DOC_DEP) $(XSLT_HTML) @HAVE_HTML_XSL_TRUE@ $(db2x_xsltproc) -s $(XSLT_HTML) $< @HAVE_HTML_XSL_TRUE@@HAVE_TIDY_TRUE@ -$(TIDY) -q -m -f /dev/null \ @HAVE_HTML_XSL_TRUE@@HAVE_TIDY_TRUE@ --doctype strict --output-xhtml true --add-xml-decl false \ @HAVE_HTML_XSL_TRUE@@HAVE_TIDY_TRUE@ $(HTML_FILES) # ---------------------------------------------------------------------- # # Texinfo conversion # $(DOC).txml: $(DOC_XML) $(DOC_DEP) $(XSLT_TEXI) $(db2x_xsltproc) -s $(XSLT_TEXI) \ --string-param install-datadir="$(datadir)/docbook2X/" \ -o $@ $< $(DOC).texi: $(DOC).txml $(db2x_texixml) $< # Stupid makeinfo uses the POSIX locale for localizing documents $(DOC).info: $(DOC).texi LANG=C makeinfo $< # ---------------------------------------------------------------------- # # Man page conversion # $(DOC).mxml: $(DOC_XML) $(DOC_DEP) $(XSLT_MAN) $(db2x_xsltproc) -s $(XSLT_MAN) \ --string-param header-4="docbook2X $(VERSION)" \ --string-param install-datadir="$(datadir)/docbook2X/" \ -o $@ $< $(MAN_FILES): $(DOC).mxml $(db2x_manxml) --solinks $< # The use of $(srcdir) below is strange, and arguably not correct # for VPATH builds; however, check gets called by automake's distcheck, # which breaks if we do not use $(srcdir) here. check: $(DOC).mxml @HAVE_GROFF_TRUE@ $(GROFF) -man -Tutf8 -z -w all $(srcdir)/*.1 2>&1 | grep "warning: " ; test $$? -eq 1 $(db2x_perl) $(top_srcdir)/test/htest-man.pl $(srcdir)/*.1 # Use for screenshot on Web site demo-man.ps: $(MAN_FILES) groff -Tps -man $(srcdir)/docbook2man.1 $(srcdir)/docbook2texi.1 \ $(srcdir)/db2x_manxml.1 $(srcdir)/db2x_texixml.1 \ $(srcdir)/db2x_xsltproc.1 $(srcdir)/sgml2xml-isoent.1 \ $(srcdir)/utf8trans.1 > demo-man.ps # ---------------------------------------------------------------------- # # The INSTALL, NEWS files # # The call to 'tr' is there because I absolutely hate the ugly # fake directional ASCII quotes. # # Important: This rule doesn't work when configured for a VPATH build; # and it is not worthwhile to try to fix it because # it is a dangerous command anyway (it changes # the INSTALL file in the distribution). install.txt: install2.xml install.xml textents.xml $(db2x_xsltproc) -s $(XSLT_TEXI) install2.xml | $(db2x_texixml) --plaintext --to-stdout | tr \` \' > install.txt cp install.txt ../INSTALL .DELETE_ON_ERROR: # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: