# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # # Translators: msgid "" msgstr "" "Project-Id-Version: ABRT\n" "Report-Msgid-Bugs-To: jmoskovc@redhat.com\n" "POT-Creation-Date: 2014-10-06 13:44+0200\n" "PO-Revision-Date: 2014-10-06 11:45+0000\n" "Last-Translator: Jakub Filak \n" "Language-Team: Zulu (http://www.transifex.com/projects/p/fedora-abrt/language/zu/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: zu\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: ../src/applet/abrt-applet.desktop.in.h:1 msgid "Automatic Bug Reporting Tool" msgstr "" #: ../src/applet/abrt-applet.desktop.in.h:2 msgid "ABRT notification applet" msgstr "" #: ../src/applet/applet.c:129 msgid "" "The report which will be sent does not contain any security sensitive data. " "Therefore it is not necessary to bother you next time and require any " "further action by you. \n" msgstr "" #: ../src/applet/applet.c:135 msgid "Do you want to enable automatically submitted crash reports?" msgstr "" #: ../src/applet/applet.c:140 msgid "Do you want to enable automatically submitted anonymous crash reports?" msgstr "" #. The NetworkManager DBus service is not available. #: ../src/applet/applet.c:241 #, c-format msgid "Can't connect to NetworkManager over DBus: %s" msgstr "" #: ../src/applet/applet.c:265 #, c-format msgid "Can't determine network status via NetworkManager: %s" msgstr "" #: ../src/applet/applet.c:384 msgid "A problem has been detected" msgstr "" #: ../src/applet/applet.c:386 #, c-format msgid "A problem in the %s package has been detected" msgstr "" #: ../src/applet/applet.c:396 #, c-format msgid "%s and the diagnostic data has been submitted" msgstr "" #: ../src/applet/applet.c:556 ../src/plugins/abrt-retrace-client.c:131 #: ../src/plugins/abrt-retrace-client.c:168 #, c-format msgid "Can't execute '%s'" msgstr "" #: ../src/applet/applet.c:641 ../src/applet/applet.c:713 #, c-format msgid "Can't close notification: %s" msgstr "" #: ../src/applet/applet.c:675 msgid "" "You are going to mute notifications of a particular problem. You will never see a notification bubble for this problem again, however, ABRT will be detecting it and you will be able to report it from ABRT GUI.\n" "\n" "Do you want to continue?" msgstr "" #: ../src/applet/applet.c:753 ../src/applet/applet.c:755 msgid "Warning" msgstr "" #: ../src/applet/applet.c:803 msgid "" "Notification area applet that notifies users about issues detected by ABRT" msgstr "" #: ../src/applet/applet.c:819 msgid "translator-credits" msgstr "" #: ../src/applet/applet.c:827 msgid "_Quit" msgstr "" #: ../src/applet/applet.c:829 msgid "Hide" msgstr "" #: ../src/applet/applet.c:831 msgid "_About" msgstr "" #: ../src/applet/applet.c:899 msgid "Problem detected" msgstr "" #: ../src/applet/applet.c:949 msgid "Ignore forever" msgstr "" #. Problem has been 'autoreported' and is considered as KNOWN #: ../src/applet/applet.c:960 ../src/applet/applet.c:975 msgid "Open" msgstr "" #: ../src/applet/applet.c:965 msgid "The Problem has already been Reported" msgstr "" #: ../src/applet/applet.c:965 msgid "A Known Problem has Occurred" msgstr "" #. Problem has not yet been 'autoreported' and can be #. * 'autoreported' on user request. #: ../src/applet/applet.c:984 ../src/applet/applet.c:1019 msgid "Report" msgstr "" #: ../src/applet/applet.c:989 msgid "A Problem has Occurred" msgstr "" #: ../src/applet/applet.c:1015 msgid "A Problem has been Reported" msgstr "" #: ../src/applet/applet.c:1023 msgid "A New Problem has Occurred" msgstr "" #: ../src/applet/applet.c:1033 #, c-format msgid "Can't show notification: %s" msgstr "" #. TODO: Terminate child's process? #: ../src/applet/applet.c:1067 ../src/daemon/abrt-upload-watch.c:168 #, c-format msgid "Can't read from gio channel: '%s'" msgstr "" #: ../src/applet/applet.c:1151 #, c-format msgid "Can't set encoding on gio channel: %s" msgstr "" #: ../src/applet/applet.c:1155 #, c-format msgid "Can't turn on nonblocking mode for gio channel: %s" msgstr "" #: ../src/applet/applet.c:1189 #, c-format msgid "Can't take ownership of '%s'" msgstr "" #: ../src/applet/applet.c:1198 #, c-format msgid "Can't open directory for writing '%s'" msgstr "" #: ../src/applet/applet.c:1481 #, c-format msgid "" "Failed to open connection to session manager: '%s', notification may " "reappear on the next login" msgstr "" #: ../src/applet/applet.c:1622 msgid "" "& [-v] [DIR]...\n" "\n" "Applet which notifies user when new problems are detected by ABRT\n" msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:1 msgid "Ask before stealing directory" msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:2 msgid "Automatically send uReport" msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:3 msgid "Shortened reporting" msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:4 msgid "Silent shortened reporting" msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:5 msgid "" "The coredump file is necessary for generating stack trace which is time and " "space consuming operation. ABRT provides a service which generates the stack" " trace from the coredump but you have to upload the coredump to this " "service. With this option disabled ABRT will upload the coredump without " "asking." msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:6 msgid "" "ABRT stores problem data in directories. Whenever ABRT needs writable " "directory, the directory is moved from the system location to your home " "directory. With this option disabled ABRT will move the problem directory " "without asking." msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:7 msgid "" "uReport is short and completely anonymous description of a problem. ABRT " "uses uReports for fast global duplicate detection. In default configuration" " uReport is sent at beginning of reporting process. With this option enabled" " uReports are sent automatically immediately after problem detection." msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:8 msgid "" "With this option enabled reporting process started by click on Report button" " in problem notification bubble will be interrupted after uReport is sent. " "You can always use the default problem browser to make complete report." msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:9 msgid "" " With this option enabled ABRT never shows notifications of reported " "problems. Takes effect only if Shortened reporting is enabled." msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:10 msgid "Ask before uploading coredump" msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:11 msgid "" " With this option enabled ABRT always create bug ticket with restricted " "access if possibly sensitive data are detected." msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:12 msgid "Request private ticket for sensitive information" msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:13 msgid "Notify incomplete problems" msgstr "" #: ../src/configuration-gui/abrt-config-widget.glade.h:14 msgid "" "Incomplete problems are detected while computer is shutting down or user is " "logging out. In order to provide valuable problem reports, ABRT will not " "allow you to submit these problems." msgstr "" #: ../src/configuration-gui/system-config-abrt.c:79 msgid "_Close" msgstr "" #: ../src/configuration-gui/system-config-abrt.c:88 msgid "_Defaults" msgstr "" #: ../src/configuration-gui/system-config-abrt.c:116 #: ../src/configuration-gui/main.c:36 msgid "Problem Reporting Configuration" msgstr "" #: ../src/configuration-gui/main.c:75 msgid "About System Config ABRT" msgstr "" #: ../src/configuration-gui/main.c:105 msgid "About" msgstr "" #: ../src/configuration-gui/main.c:106 msgid "Quit" msgstr "" #: ../src/daemon/abrt-action-save-package-data.c:388 msgid "" "& [-v] [-c CONFFILE] -d DIR\n" "\n" "Query package database and save package and component name" msgstr "" #: ../src/daemon/abrt-action-save-package-data.c:400 #: ../src/plugins/abrt-action-analyze-backtrace.c:53 #: ../src/plugins/abrt-action-analyze-c.c:78 #: ../src/plugins/abrt-action-analyze-oops.c:48 #: ../src/plugins/abrt-action-analyze-xorg.c:84 #: ../src/plugins/abrt-action-analyze-python.c:47 #: ../src/plugins/abrt-action-generate-backtrace.c:55 #: ../src/plugins/abrt-action-generate-core-backtrace.c:52 msgid "Problem directory" msgstr "" #: ../src/daemon/abrt-action-save-package-data.c:401 msgid "Configuration file" msgstr "" #: ../src/daemon/abrt-server.c:785 ../src/dbus/abrt-dbus.c:781 #: ../src/dbus/abrt-configuration.c:1002 ../src/daemon/abrtd.c:484 msgid "& [options]" msgstr "" #: ../src/daemon/abrt-server.c:796 msgid "Use NUM as client uid" msgstr "" #: ../src/daemon/abrt-server.c:797 ../src/daemon/abrt-upload-watch.c:280 #: ../src/plugins/abrt-watch-log.c:153 ../src/plugins/abrt-dump-oops.c:96 #: ../src/plugins/abrt-dump-journal-oops.c:302 #: ../src/plugins/abrt-dump-xorg.c:244 msgid "Log to syslog" msgstr "" #: ../src/daemon/abrt-server.c:798 ../src/daemon/abrtd.c:500 msgid "Add program names to log" msgstr "" #: ../src/dbus/abrt-dbus.c:123 msgid "Unknown error" msgstr "" #: ../src/dbus/abrt-dbus.c:188 #, c-format msgid "'%s' is not a valid problem directory" msgstr "" #: ../src/dbus/abrt-dbus.c:223 #, c-format msgid "'%s' element can't be modified" msgstr "" #: ../src/dbus/abrt-dbus.c:244 ../src/dbus/abrt-dbus.c:446 #: ../src/dbus/abrt-dbus.c:498 ../src/dbus/abrt-configuration.c:618 #: ../src/dbus/abrt-configuration.c:683 #, c-format msgid "Not Authorized" msgstr "" #: ../src/dbus/abrt-dbus.c:256 msgid "Can't access the problem for modification" msgstr "" #: ../src/dbus/abrt-dbus.c:461 msgid "Chowning directory failed. Check system logs for more details." msgstr "" #: ../src/dbus/abrt-dbus.c:559 #, c-format msgid "'%s' is not a valid element name" msgstr "" #: ../src/dbus/abrt-dbus.c:580 #, c-format msgid "Can't get size of '%s'" msgstr "" #: ../src/dbus/abrt-dbus.c:595 msgid "No problem space left" msgstr "" #: ../src/dbus/abrt-dbus.c:627 #, c-format msgid "Can't delete the element '%s' from the problem directory '%s'" msgstr "" #: ../src/dbus/abrt-dbus.c:763 ../src/dbus/abrt-configuration.c:983 #, c-format msgid "" "The name '%s' has been lost, please check if other service owning the name " "is not running.\n" msgstr "" #: ../src/dbus/abrt-dbus.c:790 ../src/dbus/abrt-configuration.c:1011 #: ../src/daemon/abrtd.c:499 msgid "Exit after NUM seconds of inactivity" msgstr "" #: ../src/dbus/abrt-dbus.c:808 ../src/dbus/abrt-configuration.c:1021 msgid "This program must be run as root." msgstr "" #: ../src/daemon/abrtd.c:451 msgid "" "The problem data are incomplete. This usually happens when a problem is " "detected while computer is shutting down or user is logging out. In order to" " provide valuable problem reports, ABRT will not allow you to submit this " "problem. If you have time and want to help the developers in their effort to" " sort out this problem, please contact them directly." msgstr "" #: ../src/daemon/abrtd.c:497 msgid "Do not daemonize" msgstr "" #: ../src/daemon/abrtd.c:498 msgid "Log to syslog even with -d" msgstr "" #: ../src/daemon/abrt-handle-event.c:406 msgid "& [-v -i] -e|--event EVENT DIR..." msgstr "" #: ../src/daemon/abrt-handle-event.c:414 msgid "Run EVENT on DIR" msgstr "" #: ../src/daemon/abrt-handle-event.c:415 msgid "Communicate directly to the user" msgstr "" #: ../src/daemon/abrt-upload-watch.c:118 #, c-format msgid "No free workers and full buffer. Omitting archive '%s'" msgstr "" #: ../src/daemon/abrt-upload-watch.c:258 msgid "" "& [-vs] [-w NUM] [-c MiB] [UPLOAD_DIRECTORY]\n" "\n" "\n" "Watches UPLOAD_DIRECTORY and unpacks incoming archives into DumpLocation\n" "specified in abrt.conf\n" "\n" "If UPLOAD_DIRECTORY is not provided, uses a value of\n" "WatchCrashdumpArchiveDir option from abrt.conf" msgstr "" #: ../src/daemon/abrt-upload-watch.c:281 msgid "Daemize" msgstr "" #: ../src/daemon/abrt-upload-watch.c:282 msgid "Number of concurrent workers. Default is " msgstr "" #: ../src/daemon/abrt-upload-watch.c:283 msgid "Maximal cache size in MiB. Default is " msgstr "" #: ../src/daemon/abrt-auto-reporting.c:81 msgid "& [ " msgstr "" #: ../src/daemon/abrt-auto-reporting.c:113 msgid "Invalid number of arguments" msgstr "" #: ../src/daemon/abrt-auto-reporting.c:138 #, c-format msgid "Unknown option value: '%s'\n" msgstr "" #: ../src/daemon/abrt-handle-upload.in:69 #, c-format msgid "" "Usage: %s [-vd] ABRT_SPOOL_DIR UPLOAD_DIR FILENAME\n" "\n" " -v - Verbose\n" " -d - Delete uploaded archive\n" " ABRT_SPOOL_DIR - Directory where valid uploaded archives are unpacked to\n" " UPLOAD_DIR - Directory where uploaded archives are stored\n" " FILENAME - Uploaded archive file name\n" msgstr "" #: ../src/daemon/abrt-handle-upload.in:105 #: ../src/daemon/abrt-handle-upload.in:108 msgid "Not a directory: '{0}'" msgstr "" #: ../src/daemon/abrt-handle-upload.in:111 msgid "Skipping: '{0}' (starts with slash)" msgstr "" #: ../src/daemon/abrt-handle-upload.in:114 msgid "Skipping: '{0}' (starts with dot)" msgstr "" #: ../src/daemon/abrt-handle-upload.in:117 msgid "Skipping: '{0}' (contains ..)" msgstr "" #: ../src/daemon/abrt-handle-upload.in:120 msgid "Skipping: '{0}' (contains space)" msgstr "" #: ../src/daemon/abrt-handle-upload.in:123 msgid "Skipping: '{0}' (contains tab)" msgstr "" #: ../src/daemon/abrt-handle-upload.in:128 msgid "Can't change directory to '{0}'" msgstr "" #: ../src/daemon/abrt-handle-upload.in:139 msgid "Unknown file type: '{0}'" msgstr "" #: ../src/daemon/abrt-handle-upload.in:144 msgid "Can't create working directory in '{0}'" msgstr "" #: ../src/daemon/abrt-handle-upload.in:155 msgid "Can't move '{0}' to '{1}'" msgstr "" #: ../src/daemon/abrt-handle-upload.in:160 msgid "Can't copy '{0}' to '{1}'" msgstr "" #: ../src/daemon/abrt-handle-upload.in:164 msgid "Verification error on '{0}'" msgstr "" #: ../src/daemon/abrt-handle-upload.in:166 msgid "Unpacking '{0}'" msgstr "" #: ../src/daemon/abrt-handle-upload.in:170 msgid "Can't create '{0}' directory" msgstr "" #: ../src/daemon/abrt-handle-upload.in:174 msgid "Can't unpack '{0}'" msgstr "" #: ../src/daemon/abrt-handle-upload.in:198 msgid "'{0}' processed successfully" msgstr "" #. Let user know what's going on #: ../src/lib/hooklib.c:253 msgid "Generating backtrace" msgstr "" #: ../src/lib/problem_api_dbus.c:42 #, c-format msgid "Can't connect to system DBus: %s" msgstr "" #: ../src/lib/problem_api_dbus.c:68 #, c-format msgid "Can't chown '%s': %s" msgstr "" #: ../src/lib/problem_api_dbus.c:97 #, c-format msgid "Deleting problem directory failed: %s" msgstr "" #: ../src/lib/problem_api_dbus.c:133 #, c-format msgid "Can't get problem data from abrt-dbus: %s" msgstr "" #: ../src/lib/problem_api_dbus.c:169 #, c-format msgid "Can't get problem list from abrt-dbus: %s" msgstr "" #: ../src/lib/ignored_problems.c:233 #, c-format msgid "Can't create temporary file '%s'" msgstr "" #: ../src/lib/ignored_problems.c:250 #, c-format msgid "" "Can't write to '%s'. Problem '%s' will not be removed from the ignored " "problems '%s'" msgstr "" #. Something nefarious happened #: ../src/lib/ignored_problems.c:264 #, c-format msgid "Can't rename '%s' to '%s'. Failed to remove problem '%s'" msgstr "" #: ../src/plugins/abrt-action-analyze-backtrace.c:41 msgid "" "& [options] -d DIR\n" "\n" "Analyzes C/C++ backtrace, generates duplication hash, backtrace rating,\n" "and identifies crash function in problem directory DIR" msgstr "" #. * The parser failed. Compute the duphash from the executable #. * instead of a backtrace. #. * and component only. This is not supposed to happen often. #: ../src/plugins/abrt-action-analyze-backtrace.c:90 #, c-format msgid "Backtrace parsing failed for %s" msgstr "" #: ../src/plugins/abrt-action-analyze-backtrace.c:146 msgid "Crash thread not found" msgstr "" #: ../src/plugins/abrt-action-analyze-c.c:67 msgid "" "& [-v] -d DIR\n" "\n" "Calculates and saves UUID of coredump in problem directory DIR" msgstr "" #: ../src/plugins/abrt-action-analyze-core.in:72 #, c-format msgid "Analyzing coredump '%s'" msgstr "" #: ../src/plugins/abrt-action-analyze-core.in:110 #, c-format msgid "Missing build id: %s" msgstr "" #: ../src/plugins/abrt-action-analyze-core.in:142 #, c-format msgid "Usage: %s [-v] [-o OUTFILE] -c COREFILE" msgstr "" #: ../src/plugins/abrt-action-analyze-core.in:164 msgid "COREFILE is not specified" msgstr "" #: ../src/plugins/abrt-action-analyze-oops.c:37 msgid "" "& [-v] -d DIR\n" "\n" "Calculates and saves UUID and DUPHASH for oops problem directory DIR" msgstr "" #: ../src/plugins/abrt-action-analyze-oops.c:79 msgid "" "The backtrace does not contain enough meaningful function frames to be " "reported. It is annoying but it does not necessary signalize a problem with " "your computer. ABRT will not allow you to create a report in a bug tracking " "system but you can contact kernel maintainers via e-mail." msgstr "" #: ../src/plugins/abrt-action-analyze-xorg.c:73 msgid "" "& [-v] -d DIR\n" "\n" "Calculates and saves UUID and DUPHASH for xorg problem directory DIR" msgstr "" #: ../src/plugins/abrt-action-analyze-xorg.c:113 #, c-format msgid "Module '%s' was loaded - won't report this crash" msgstr "" #: ../src/plugins/abrt-action-analyze-python.c:36 msgid "" "& [-v] -d DIR\n" "\n" "Calculates and saves UUID and DUPHASH of python crash dumps" msgstr "" #: ../src/plugins/abrt-action-analyze-vmcore.in:52 msgid "Usage: {0} [-v[v]] [--core=VMCORE]" msgstr "" #: ../src/plugins/abrt-action-analyze-vmcore.in:79 msgid "File {0} doesn't exist" msgstr "" #: ../src/plugins/abrt-action-analyze-vmcore.in:82 msgid "Extracting the oops text from core" msgstr "" #: ../src/plugins/abrt-action-analyze-vmcore.in:87 msgid "" "Can't process {0}:\n" "{1}" msgstr "" #: ../src/plugins/abrt-action-analyze-vmcore.in:95 msgid "Can't extract the oops message: '{0}'" msgstr "" #: ../src/plugins/abrt-action-analyze-vmcore.in:98 msgid "Oops text extracted successfully" msgstr "" #: ../src/plugins/abrt-action-check-oops-for-hw-error.in:83 msgid "" "The kernel log indicates that hardware errors were detected.\n" "This is most likely not a software problem.\n" msgstr "" #: ../src/plugins/abrt-action-generate-backtrace.c:42 msgid "" "& [options] -d DIR\n" "\n" "Analyzes coredump in problem directory DIR, generates and saves backtrace" msgstr "" #: ../src/plugins/abrt-action-generate-backtrace.c:56 msgid "Additional debuginfo directories" msgstr "" #: ../src/plugins/abrt-action-generate-backtrace.c:57 msgid "Kill gdb if it runs for more than NUM seconds" msgstr "" #. Don't be completely silent. gdb run takes a few seconds, #. * it is useful to let user know it (maybe) worked. #: ../src/plugins/abrt-action-generate-backtrace.c:103 #, c-format msgid "Backtrace is generated and saved, %u bytes" msgstr "" #: ../src/plugins/abrt-action-generate-core-backtrace.c:40 msgid "" "& [-v] [-r] -d DIR\n" "\n" "Creates coredump-level backtrace from core dump and corresponding binary" msgstr "" #: ../src/plugins/abrt-action-generate-core-backtrace.c:53 msgid "Do not hash fingerprints" msgstr "" #. Let user know what's going on #: ../src/plugins/abrt-action-generate-core-backtrace.c:64 msgid "Generating core_backtrace" msgstr "" #: ../src/plugins/abrt-action-generate-core-backtrace.c:81 msgid "Error: GDB did not return any data" msgstr "" #: ../src/plugins/abrt-action-generate-core-backtrace.c:95 #, c-format msgid "Error: %s" msgstr "" #: ../src/plugins/abrt-action-install-debuginfo.in:51 msgid "Exiting on user command" msgstr "" #: ../src/plugins/abrt-action-install-debuginfo.in:88 #, c-format msgid "" "Usage: %s [-vy] [--ids=BUILD_IDS_FILE]\n" " [--tmpdir=TMPDIR] [--cache=CACHEDIR[:DEBUGINFODIR1:DEBUGINFODIR2...]] [--size_mb=SIZE]\n" " [-e, --exact=PATH[:PATH]...]\n" "\n" "Installs debuginfos for all build-ids listed in BUILD_IDS_FILE\n" "to CACHEDIR, using TMPDIR as temporary staging area.\n" "Old files in CACHEDIR are deleted until it is smaller than SIZE.\n" "\n" " -v Be verbose\n" " -y Noninteractive, assume 'Yes' to all questions\n" " --ids Default: build_ids\n" " --tmpdir Default: @LARGE_DATA_TMP_DIR@/abrt-tmp-debuginfo-RANDOM_SUFFIX\n" " --cache Default: /var/cache/abrt-di\n" " --size_mb Default: 4096\n" " -e,--exact Download only specified files\n" " --repo Pattern to use when searching for repos.\n" " Default: *debug*\n" msgstr "" #: ../src/plugins/abrt-action-install-debuginfo.in:169 msgid "Can't open {0}: {1}" msgstr "" #: ../src/plugins/abrt-action-install-debuginfo.in:206 msgid "Coredump references {0} debuginfo files, {1} of them are not installed" msgstr "" #: ../src/plugins/abrt-action-install-debuginfo.in:209 msgid "{0} of debuginfo files are not installed" msgstr "" #: ../src/plugins/abrt-action-install-debuginfo.in:223 msgid "Missing requested file: {0}" msgstr "" #: ../src/plugins/abrt-action-install-debuginfo.in:228 msgid "Missing debuginfo file: {0}" msgstr "" #: ../src/plugins/abrt-action-install-debuginfo.in:231 msgid "All debuginfo files are available" msgstr "" #: ../src/plugins/abrt-action-perform-ccpp-analysis.in:62 msgid "" "Ok to upload core dump? (It may contain sensitive data). If your answer is " "'No', a stack trace will be generated locally. (It may download a huge " "amount of data)." msgstr "" #: ../src/plugins/abrt-action-perform-ccpp-analysis.in:71 msgid "" "Do you want to generate a stack trace locally? (It may download a huge " "amount of data but reporting can't continue without stack trace)." msgstr "" #: ../src/plugins/abrt-action-trim-files.c:222 msgid "" "& [-v] [-d SIZE:DIR]... [-f SIZE:DIR]... [-p DIR] [FILE]...\n" "\n" "Deletes problem dirs (-d) or files (-f) in DIRs until they are smaller than SIZE.\n" "FILEs are preserved (never deleted)." msgstr "" #: ../src/plugins/abrt-action-trim-files.c:236 msgid "Delete whole problem directories" msgstr "" #: ../src/plugins/abrt-action-trim-files.c:237 msgid "Delete files inside this directory" msgstr "" #: ../src/plugins/abrt-action-trim-files.c:238 msgid "Preserve this directory" msgstr "" #: ../src/plugins/abrt-action-ureport:40 #, c-format msgid "Unable to start '%s', error message was: '%s'" msgstr "" #: ../src/plugins/abrt-action-ureport:51 #, c-format msgid "Not a number in file '%s'" msgstr "" #: ../src/plugins/abrt-action-ureport:80 #, c-format msgid "Usage: %s [-v]" msgstr "" #: ../src/plugins/abrt-action-ureport:100 msgid "Unable to get current working directory as it was probably deleted" msgstr "" #: ../src/plugins/abrt-action-ureport:128 msgid "A bug was already filed about this problem:" msgstr "" #: ../src/plugins/abrt-action-ureport:138 msgid "uReport was already sent, not sending it again" msgstr "" #: ../src/plugins/abrt-action-ureport:159 msgid "Adding you to CC List of the existing bugzilla bug" msgstr "" #: ../src/plugins/abrt-action-ureport:164 #, c-format msgid "reporter-ureport failed with exit code %d" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:529 msgid "Signal sent by userspace code" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:533 msgid "Signal sent by timer/IO/async event" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:541 msgid "Signal has siginfo.si_code = SI_USER" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:544 msgid "Signal due to write to closed pipe" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:550 #: ../src/plugins/abrt-gdb-exploitable:575 msgid "Signal sent by keyboard" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:554 #: ../src/plugins/abrt-gdb-exploitable:579 msgid "Job control signal sent by kernel" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:558 #: ../src/plugins/abrt-gdb-exploitable:587 msgid "Signal sent by window resize" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:562 #: ../src/plugins/abrt-gdb-exploitable:591 msgid "Signal sent by alarm(N) expiration" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:583 msgid "Signal due to write to broken pipe" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:607 msgid "ABRT signal (abort() was called?)" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:616 msgid "XCPU signal (over CPU time limit)" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:620 msgid "XFSZ signal (over file size limit)" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:624 msgid "TRAP signal (can be a bug in a debugger/tracer)" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:628 msgid "SYS signal (unknown syscall was called?)" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:633 msgid "Arithmetic exception" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:637 msgid "Division by zero" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:641 msgid "Illegal instruction (jump to a random address?)" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:647 msgid "Non-crash related signal" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:652 msgid "Stack overflow" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:656 msgid "Write to an invalid address" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:660 msgid "Subroutine return to an invalid address (corrupted stack?)" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:666 #: ../src/plugins/abrt-gdb-exploitable:670 msgid "Jump to an invalid address" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:674 msgid "" "Access past the end of mapped file, invalid address, unaligned access, etc" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:693 msgid "Can't get signal no and do exploitability analysis\n" msgstr "" #: ../src/plugins/abrt-gdb-exploitable:706 msgid "Likely crash reason: " msgstr "" #: ../src/plugins/abrt-gdb-exploitable:707 msgid "Exploitable rating (0-9 scale): " msgstr "" #: ../src/plugins/abrt-gdb-exploitable:709 msgid "Current instruction: " msgstr "" #: ../src/plugins/abrt-gdb-exploitable:711 msgid "Exploitability analysis came up empty\n" msgstr "" #: ../src/plugins/abrt-watch-log.c:142 msgid "" "& [-vs] [-F STR]... FILE PROG [ARGS]\n" "\n" "Watch log file FILE, run PROG when it grows or is replaced" msgstr "" #: ../src/plugins/abrt-watch-log.c:154 msgid "Don't run PROG if STRs aren't found" msgstr "" #: ../src/plugins/abrt-dump-oops.c:76 msgid "" "& [-vusoxm] [-d DIR]/[-D] [FILE]\n" "\n" "Extract oops from FILE (or standard input)" msgstr "" #: ../src/plugins/abrt-dump-oops.c:97 #: ../src/plugins/abrt-dump-journal-oops.c:303 msgid "Print found oopses on standard output" msgstr "" #. oopses don't contain any sensitive info, and even #. * the old koops app was showing the oopses to all users #: ../src/plugins/abrt-dump-oops.c:101 #: ../src/plugins/abrt-dump-journal-oops.c:307 msgid "Create new problem directory in DIR for every oops found" msgstr "" #: ../src/plugins/abrt-dump-oops.c:102 #: ../src/plugins/abrt-dump-journal-oops.c:308 #: ../src/plugins/abrt-dump-xorg.c:247 msgid "Same as -d DumpLocation, DumpLocation is specified in abrt.conf" msgstr "" #: ../src/plugins/abrt-dump-oops.c:103 msgid "Save the extracted information in PROBLEM" msgstr "" #: ../src/plugins/abrt-dump-oops.c:104 #: ../src/plugins/abrt-dump-journal-oops.c:309 #: ../src/plugins/abrt-dump-xorg.c:248 msgid "Make the problem directory world readable" msgstr "" #: ../src/plugins/abrt-dump-oops.c:105 #: ../src/plugins/abrt-dump-journal-oops.c:310 msgid "Throttle problem directory creation to 1 per second" msgstr "" #: ../src/plugins/abrt-dump-oops.c:106 ../src/plugins/abrt-dump-xorg.c:249 msgid "Print search string(s) to stdout and exit" msgstr "" #: ../src/plugins/abrt-dump-oops.c:126 #: ../src/plugins/abrt-dump-journal-oops.c:214 msgid "Failed to compile regex" msgstr "" #: ../src/plugins/abrt-dump-oops.c:185 msgid "Can't update the problem: more than one oops found" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:43 msgid "Cannot read journal data." msgstr "" #. Only notice because this is expected #: ../src/plugins/abrt-dump-journal-oops.c:125 #, c-format msgid "Not restoring journal watch's position: file '%s' does not exist" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:129 #, c-format msgid "Cannot restore journal watch's position form file '%s'" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:135 #, c-format msgid "Cannot restore journal watch's position: path '%s' is not regular file" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:141 #, c-format msgid "" "Cannot restore journal watch's position: file '%s' exceeds %dB size limit" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:149 #, c-format msgid "Cannot restore journal watch's position: open('%s')" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:158 #, c-format msgid "Cannot restore journal watch's position: cannot read entire file '%s'" msgstr "" #. abrt_journal_set_cursor() prints error message in verbose mode #: ../src/plugins/abrt-dump-journal-oops.c:170 #, c-format msgid "Failed to move the journal to a cursor from file '%s'" msgstr "" #. abrt_journal_set_cursor() prints error message in verbose mode #: ../src/plugins/abrt-dump-journal-oops.c:185 msgid "Cannot save journal watch's position" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:195 #, c-format msgid "Cannot save journal watch's position: open('%s')" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:251 msgid "Failed to initialize systemd-journal watch" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:272 msgid "" "& [-vsoxtf] [-e]/[-c CURSOR] [-d DIR]/[-D]\n" "\n" "Extract oops from systemd-journal\n" "\n" "-c and -e options conflicts because both specifies the first read message.\n" "\n" "-e is useful only for -f because the following of journal starts by reading \n" "the entire journal if the last seen possition is not available.\n" "\n" "The last seen position is saved in " msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:311 msgid "Start reading systemd-journal from the CURSOR position" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:312 msgid "Start reading systemd-journal from the end" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:313 msgid "Follow systemd-journal from the last seen position (if available)" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:327 msgid "You need to specify either -c CURSOR or -e" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:356 msgid "Cannot open systemd-journal" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:359 msgid "Cannot filter systemd-journal to kernel data only" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:362 msgid "Cannot seek to the end of journal" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:369 #, c-format msgid "Failed to start watch from cursor '%s'" msgstr "" #: ../src/plugins/abrt-dump-journal-oops.c:378 #, c-format msgid "Failed to set systemd-journal cursor '%s'" msgstr "" #: ../src/plugins/abrt-dump-xorg.c:237 msgid "" "& [-vsoxm] [-d DIR]/[-D] [FILE]\n" "\n" "Extract Xorg crash from FILE (or standard input)" msgstr "" #: ../src/plugins/abrt-dump-xorg.c:245 msgid "Print found crash data on standard output" msgstr "" #: ../src/plugins/abrt-dump-xorg.c:246 msgid "Create problem directory in DIR for every crash found" msgstr "" #: ../src/plugins/abrt-retrace-client.c:70 msgid "" "Retrace server can not be used, because the crash is too large. Try local " "retracing." msgstr "" #. Hopefully, by this time child emitted more meaningful #. * error message. But just in case it didn't: #: ../src/plugins/abrt-retrace-client.c:103 #: ../src/plugins/abrt-retrace-client.c:182 #: ../src/plugins/abrt-retrace-client.c:186 msgid "Can't create temporary file in " msgstr "" #: ../src/plugins/abrt-retrace-client.c:211 #: ../src/plugins/abrt-retrace-client.c:398 #: ../src/plugins/abrt-retrace-client.c:677 #: ../src/plugins/abrt-retrace-client.c:842 #, c-format msgid "Failed to send HTTP header of length %d: NSS error %d" msgstr "" #: ../src/plugins/abrt-retrace-client.c:223 #: ../src/plugins/abrt-retrace-client.c:412 #: ../src/plugins/abrt-retrace-client.c:775 #: ../src/plugins/abrt-retrace-client.c:859 #: ../src/plugins/abrt-retrace-client.c:926 #: ../src/plugins/abrt-retrace-client.c:1011 #: ../src/plugins/abrt-retrace-client.c:1070 #, c-format msgid "" "Unexpected HTTP response from server: %d\n" "%s" msgstr "" #: ../src/plugins/abrt-retrace-client.c:232 #: ../src/plugins/abrt-retrace-client.c:755 #: ../src/plugins/abrt-retrace-client.c:851 #: ../src/plugins/abrt-retrace-client.c:918 #: ../src/plugins/abrt-retrace-client.c:992 #: ../src/plugins/abrt-retrace-client.c:1062 msgid "Invalid response from server: missing HTTP message body." msgstr "" #: ../src/plugins/abrt-retrace-client.c:424 #, c-format msgid "" "Retrace server is unable to process package '%s.%s'.\n" "Is it a part of official '%s' repositories?" msgstr "" #: ../src/plugins/abrt-retrace-client.c:444 msgid "Querying server settings" msgstr "" #: ../src/plugins/abrt-retrace-client.c:452 msgid "The server is fully occupied. Try again later." msgstr "" #: ../src/plugins/abrt-retrace-client.c:453 msgid "The server denied your request." msgstr "" #: ../src/plugins/abrt-retrace-client.c:484 #: ../src/plugins/abrt-retrace-client.c:500 #, c-format msgid "'%s' must be a regular file in order to use Retrace server." msgstr "" #: ../src/plugins/abrt-retrace-client.c:520 #, c-format msgid "" "The size of your crash is %s, but the retrace server only accepts crashes " "smaller or equal to %s." msgstr "" #: ../src/plugins/abrt-retrace-client.c:540 msgid "The server does not support xz-compressed tarballs." msgstr "" #: ../src/plugins/abrt-retrace-client.c:577 #, c-format msgid "The release '%s' is not supported by the Retrace server." msgstr "" #: ../src/plugins/abrt-retrace-client.c:581 msgid "The server is not able to handle your request." msgstr "" #: ../src/plugins/abrt-retrace-client.c:600 msgid "Unknown package sent to Retrace server." msgstr "" #: ../src/plugins/abrt-retrace-client.c:609 msgid "Preparing an archive to upload" msgstr "" #: ../src/plugins/abrt-retrace-client.c:628 #, c-format msgid "" "The size of your archive is %s, but the retrace server only accepts archives" " smaller or equal to %s." msgstr "" #: ../src/plugins/abrt-retrace-client.c:640 #, c-format msgid "You are going to upload %s. Continue?" msgstr "" #: ../src/plugins/abrt-retrace-client.c:649 msgid "Cancelled by user" msgstr "" #: ../src/plugins/abrt-retrace-client.c:683 #, c-format msgid "Uploading %s\n" msgstr "" #: ../src/plugins/abrt-retrace-client.c:709 #, c-format msgid "Uploading %d%%\n" msgstr "" #: ../src/plugins/abrt-retrace-client.c:721 msgid "Failed to read from a pipe" msgstr "" #: ../src/plugins/abrt-retrace-client.c:734 #, c-format msgid "Failed to send data: NSS error %d (%s): %s" msgstr "" #: ../src/plugins/abrt-retrace-client.c:745 msgid "Upload successful" msgstr "" #: ../src/plugins/abrt-retrace-client.c:767 msgid "" "Your problem directory is corrupted and can not be processed by the Retrace " "server." msgstr "" #: ../src/plugins/abrt-retrace-client.c:769 msgid "" "The archive contains malicious files (such as symlinks) and thus can not be " "processed." msgstr "" #: ../src/plugins/abrt-retrace-client.c:782 msgid "Invalid response from server: missing X-Task-Id." msgstr "" #: ../src/plugins/abrt-retrace-client.c:788 msgid "Invalid response from server: missing X-Task-Password." msgstr "" #: ../src/plugins/abrt-retrace-client.c:795 msgid "Retrace job started" msgstr "" #: ../src/plugins/abrt-retrace-client.c:808 #, c-format msgid "" "Task Id: %s\n" "Task Password: %s\n" msgstr "" #: ../src/plugins/abrt-retrace-client.c:866 msgid "Invalid response from server: missing X-Task-Status." msgstr "" #: ../src/plugins/abrt-retrace-client.c:878 #, c-format msgid "" "Task Status: %s\n" "%s\n" msgstr "" #: ../src/plugins/abrt-retrace-client.c:909 #: ../src/plugins/abrt-retrace-client.c:983 #: ../src/plugins/abrt-retrace-client.c:1053 #, c-format msgid "Failed to send HTTP header of length %d: NSS error %d." msgstr "" #: ../src/plugins/abrt-retrace-client.c:1170 msgid "" "Retrace failed. Try again later and if the problem persists report this " "issue please." msgstr "" #: ../src/plugins/abrt-retrace-client.c:1217 msgid "log to syslog" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1219 msgid "allow insecure connection to retrace server" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1221 msgid "" "do not check whether retrace server is able to process given package before " "uploading the archive" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1224 msgid "retrace server URL" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1226 msgid "retrace server port" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1228 msgid "(debug) show received HTTP headers" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1229 msgid "For create and batch operations" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1231 msgid "read data from ABRT problem directory" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1233 msgid "read data from coredump" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1235 msgid "Delay for polling operations" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1237 msgid "(debug) do not delete temporary archive created from dump dir in " msgstr "" #: ../src/plugins/abrt-retrace-client.c:1239 msgid "For status, backtrace, and log operations" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1241 msgid "id of your task on server" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1243 msgid "password of your task on server" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1247 msgid "" "abrt-retrace-client [options]\n" "Operations: create/status/backtrace/log/batch/exploitable" msgstr "" #: ../src/plugins/abrt-retrace-client.c:1292 #: ../src/plugins/abrt-retrace-client.c:1298 msgid "Either problem directory or coredump is needed." msgstr "" #: ../src/plugins/abrt-retrace-client.c:1304 #: ../src/plugins/abrt-retrace-client.c:1312 #: ../src/plugins/abrt-retrace-client.c:1320 #: ../src/plugins/abrt-retrace-client.c:1328 msgid "Task id is needed." msgstr "" #: ../src/plugins/abrt-retrace-client.c:1306 #: ../src/plugins/abrt-retrace-client.c:1314 #: ../src/plugins/abrt-retrace-client.c:1322 #: ../src/plugins/abrt-retrace-client.c:1330 msgid "Task password is needed." msgstr "" #: ../src/plugins/abrt-retrace-client.c:1334 #, c-format msgid "Unknown operation: %s." msgstr "" #: ../src/plugins/analyze_LocalGDB.xml.in.h:1 msgid "Local GNU Debugger" msgstr "" #: ../src/plugins/analyze_LocalGDB.xml.in.h:2 msgid "Download debuginfo packages and generate backtrace locally using GDB" msgstr "" #: ../src/plugins/analyze_LocalGDB.xml.in.h:3 msgid "" "Needs to downloads debuginfo packages, which might take significant time, " "and take up disk space. However, unlike RetraceServer, doesn't send coredump" " to remote machines." msgstr "" #: ../src/plugins/analyze_RetraceServer.xml.in.h:1 msgid "Send core dump to remote retrace server for analysis" msgstr "" #: ../src/plugins/analyze_RetraceServer.xml.in.h:2 msgid "" "Uploads coredump to a server, which generates backtrace and returns it. " "Pros: no need for debuginfo downloads. Retrace server's database of " "debuginfos is more complete. Retrace server may generate better backtraces. " "Cons: coredump you upload contains all the data from the crashed program, " "including your private data, if any." msgstr "" #: ../src/plugins/analyze_RetraceServer.xml.in.h:3 msgid "Retrace server URL" msgstr "" #: ../src/plugins/analyze_RetraceServer.xml.in.h:4 msgid "Address of the retrace server" msgstr "" #: ../src/plugins/analyze_RetraceServer.xml.in.h:5 msgid "Insecure" msgstr "" #: ../src/plugins/analyze_RetraceServer.xml.in.h:6 msgid "Whether or not to use insecure connection" msgstr "" #: ../src/plugins/analyze_RetraceServer.xml.in.h:7 msgid "" "Write \"insecure\" to allow insecure connection <a " "href=\"https://fedorahosted.org/abrt/wiki/AbrtRetraceServerInsecureConnection\"" " >(warning)</a>" msgstr "" #: ../src/plugins/collect_xsession_errors.xml.in.h:1 msgid "Collect .xsession-errors" msgstr "" #: ../src/plugins/collect_xsession_errors.xml.in.h:2 msgid "Save relevant lines from ~/.xsession-errors file" msgstr "" #: ../src/plugins/collect_xsession_errors.xml.in.h:3 msgid "" "Scans through ~/.xsession-errors file and saves those lines which contain " "executable's name. The result is saved as 'xsession_errors' element." msgstr "" #: ../src/plugins/https-utils.c:62 msgid "An error occurred on the server side." msgstr "" #: ../src/plugins/https-utils.c:65 #, c-format msgid "A server-side error occurred on '%s'" msgstr "" #: ../src/plugins/https-utils.c:74 msgid "An error occurred while connecting to the server" msgstr "" #: ../src/plugins/https-utils.c:77 #, c-format msgid "An error occurred while connecting to '%s'" msgstr "" #: ../src/plugins/https-utils.c:97 #, c-format msgid "Issuer certificate is invalid: '%s'." msgstr "" #: ../src/plugins/https-utils.c:100 #, c-format msgid "Certificate is signed by an untrusted issuer: '%s'." msgstr "" #: ../src/plugins/https-utils.c:103 #, c-format msgid "Certificate subject name '%s' does not match target host name '%s'." msgstr "" #: ../src/plugins/https-utils.c:107 msgid "Remote certificate has expired." msgstr "" #: ../src/plugins/https-utils.c:110 #, c-format msgid "Certificate issuer is not recognized: '%s'." msgstr "" #: ../src/plugins/https-utils.c:113 #, c-format msgid "Bad certificate received. Subject '%s', issuer '%s'." msgstr "" #: ../src/plugins/https-utils.c:149 #, c-format msgid "Failed to get slot 'PEM Token #0': %d." msgstr "" #: ../src/plugins/https-utils.c:182 #, c-format msgid "Can't resolve host name '%s'. NSS error %d." msgstr "" #. Host exists, but has neither IPv4 nor IPv6?? #: ../src/plugins/https-utils.c:203 #, c-format msgid "Can't resolve host name '%s'." msgstr "" #: ../src/plugins/https-utils.c:210 msgid "Failed to set socket blocking mode." msgstr "" #: ../src/plugins/https-utils.c:213 msgid "Failed to wrap TCP socket by SSL." msgstr "" #: ../src/plugins/https-utils.c:215 ../src/plugins/https-utils.c:217 #: ../src/plugins/https-utils.c:219 ../src/plugins/https-utils.c:221 msgid "Failed to enable client handshake to SSL socket." msgstr "" #: ../src/plugins/https-utils.c:223 msgid "Failed to set URL to SSL socket." msgstr "" #: ../src/plugins/https-utils.c:232 #, c-format msgid "Can't connect to '%s'" msgstr "" #: ../src/plugins/https-utils.c:240 msgid "Failed to set certificate hook." msgstr "" #: ../src/plugins/https-utils.c:246 msgid "Failed to set handshake callback." msgstr "" #: ../src/plugins/https-utils.c:250 msgid "Failed to reset handshake." msgstr "" #: ../src/plugins/https-utils.c:257 #, c-format msgid "Failed to complete SSL handshake: NSS error %d." msgstr "" #: ../src/plugins/https-utils.c:266 msgid "Failed to close SSL socket." msgstr "" #: ../src/plugins/https-utils.c:331 #, c-format msgid "Malformed HTTP response header: '%s'" msgstr "" #: ../src/plugins/https-utils.c:368 #, c-format msgid "Receiving of data failed: NSS error %d." msgstr "" #: ../src/plugins/https-utils.c:397 msgid "Malformed chunked response." msgstr "" #: ../src/plugins/https-utils.c:422 msgid "Failed to initialize NSS." msgstr "" #: ../src/plugins/https-utils.c:428 msgid "Failed to initialize security module." msgstr "" #: ../src/plugins/https-utils.c:443 msgid "Failed to shutdown NSS." msgstr "" #: ../src/plugins/oops-utils.c:71 #, c-format msgid "Sleeping for %d seconds" msgstr "" #: ../src/plugins/oops-utils.c:205 msgid "" "A kernel problem occurred because of broken BIOS. Unfortunately, such " "problems are not fixable by kernel maintainers." msgstr "" #: ../src/plugins/oops-utils.c:210 msgid "" "A kernel problem occurred, but your hardware is unsupported, therefore " "kernel maintainers are unable to fix this problem." msgstr "" #: ../src/plugins/oops-utils.c:225 #, c-format msgid "" "A kernel problem occurred, but your kernel has been tainted (flags:%s). " "Kernel maintainers are unable to diagnose tainted reports." msgstr "" #: ../src/plugins/oops-utils.c:233 #, c-format msgid " Tainted modules: %s." msgstr "" #: ../src/plugins/bodhi.c:375 msgid "List of bug ids" msgstr "" #: ../src/plugins/bodhi.c:376 msgid "Specify a bodhi server url" msgstr "" #: ../src/plugins/bodhi.c:377 msgid "Specify a release" msgstr "" #: ../src/plugins/bodhi.c:382 msgid "" "& [-v] [-r[RELEASE]] (-b ID1[,ID2,...] | PKG-NAME) [PKG-NAME]... \n" "\n" "Search for updates on bodhi server" msgstr "" #: ../src/plugins/bodhi.c:434 msgid "Searching for updates" msgstr "" #: ../src/plugins/bodhi.c:440 msgid "No updates for this package found" msgstr "" #. strbuf_free(q); #: ../src/plugins/bodhi.c:469 msgid "Local version of the package is newer than available updates" msgstr "" #: ../src/plugins/bodhi.c:486 #, c-format msgid "" "An update exists which might fix your problem. You can install it by " "running: %s. Do you want to continue with reporting the bug?" msgstr "" #: ../src/hooks/abrt-merge-pstoreoops.c:85 msgid "" "& [-v] [-od] FILE...\n" "\n" "Scans files for split oops message. Can print and/or delete them." msgstr "" #: ../src/hooks/abrt-merge-pstoreoops.c:97 msgid "Print found oopses" msgstr "" #: ../src/hooks/abrt-merge-pstoreoops.c:98 msgid "Delete files with found oopses" msgstr "" #: ../src/cli/abrt-cli-core.c:91 #, c-format msgid "'%s' identifies more than one problem directory" msgstr "" #: ../src/cli/abrt-cli.c:144 msgid "Usage: abrt-cli [--version] COMMAND [DIR]..." msgstr "" #: ../src/cli/abrt-cli.c:148 msgid "List problems [in DIRs]" msgstr "" #: ../src/cli/abrt-cli.c:149 msgid "Remove problem directory DIR" msgstr "" #: ../src/cli/abrt-cli.c:150 msgid "Analyze and report problem data in DIR" msgstr "" #: ../src/cli/abrt-cli.c:151 msgid "Print information about DIR" msgstr "" #: ../src/cli/abrt-cli.c:152 msgid "Print the count of the recent crashes" msgstr "" #: ../src/cli/abrt-cli.c:153 msgid "Process multiple problems" msgstr "" #: ../src/cli/abrt-cli.c:168 msgid "See 'abrt-cli COMMAND --help' for more information" msgstr "" #: ../src/cli/list.c:130 msgid "& list [options] [DIR]..." msgstr "" #: ../src/cli/list.c:139 msgid "List only not-reported problems" msgstr "" #. deprecate -d option with --pretty=full #: ../src/cli/list.c:141 ../src/cli/list.c:194 msgid "Show detailed report" msgstr "" #: ../src/cli/list.c:142 msgid "List only the problems more recent than specified timestamp" msgstr "" #: ../src/cli/list.c:143 msgid "List only the problems older than specified timestamp" msgstr "" #: ../src/cli/list.c:175 #, c-format msgid "" "The Autoreporting feature is disabled. Please consider enabling it by issuing\n" "'abrt-auto-reporting enabled' as a user with root privileges\n" msgstr "" #: ../src/cli/list.c:186 msgid "& info [options] DIR..." msgstr "" #: ../src/cli/list.c:195 msgid "Text larger than this will be shown abridged" msgstr "" #: ../src/cli/list.c:215 #, c-format msgid "No such problem directory '%s'" msgstr "" #: ../src/cli/status.c:70 msgid "& status [DIR]..." msgstr "" #: ../src/cli/status.c:78 msgid "Print only the problem count without any message" msgstr "" #: ../src/cli/status.c:79 msgid "Print only the problems more recent than specified timestamp" msgstr "" #: ../src/cli/status.c:104 #, c-format msgid "ABRT has detected %u problem(s). For more info run: abrt-cli list%s\n" msgstr "" #: ../src/cli/report.c:28 msgid "& report [options] DIR..." msgstr "" #: ../src/cli/report.c:38 msgid "Remove PROBLEM_DIR after reporting" msgstr "" #: ../src/cli/report.c:71 ../src/cli/process.c:70 #, c-format msgid "Deleting '%s'" msgstr "" #: ../src/cli/process.c:64 msgid "Actions: remove(rm), info(i), skip(s):" msgstr "" #: ../src/cli/process.c:66 msgid "Actions: remove(rm), report(e), info(i), skip(s):" msgstr "" #: ../src/cli/process.c:77 #, c-format msgid "Reporting '%s'" msgstr "" #. dummy must be free because the function ask allocate memory #: ../src/cli/process.c:133 msgid "For next problem press ENTER:" msgstr "" #: ../src/cli/process.c:144 msgid "Without --since argument, iterates over all detected problems." msgstr "" #: ../src/cli/process.c:150 msgid "Selects only problems detected after timestamp" msgstr "" #: ../src/plugins/analyze_CCpp.xml.in.h:1 msgid "" "Send core dump to remote retrace server for analysis or perform local " "analysis if the remote analysis fails" msgstr "" #: ../src/plugins/analyze_CCpp.xml.in.h:2 msgid "" "Uploads coredump to a server, which generates backtrace and returns it. If " "user doesn't want to upload his coredump to anywhere the event performs " "local analysis. Local analysis is run event if remote analysis fails. Pros: " "no need for debuginfo downloads. Retrace server's database of debuginfos is " "more complete. Retrace server may generate better backtraces. Cons: coredump" " you upload contains all the data from the crashed program, including your " "private data, if any." msgstr "" #: ../src/plugins/analyze_VMcore.xml.in.h:1 msgid "Analyze VM core" msgstr "" #: ../src/plugins/analyze_VMcore.xml.in.h:2 msgid "" "Install kernel debuginfo packages, generate kernel log and oops message" msgstr "" #: ../src/plugins/analyze_VMcore.xml.in.h:3 msgid "" "Needs to install kernel debuginfo packages, which might take significant " "time, and take up disk space." msgstr "" #: ../src/plugins/collect_GConf.xml.in.h:1 msgid "Collect GConf configuration" msgstr "" #: ../src/plugins/collect_GConf.xml.in.h:2 msgid "Save configuration from application's GConf directory" msgstr "" #: ../src/plugins/collect_GConf.xml.in.h:3 msgid "" "Runs gconftool-2 --recursive-list /apps/executable and saves it as " "'gconf_subtree' element." msgstr "" #: ../src/plugins/collect_vimrc_system.xml.in.h:1 msgid "Collect system-wide vim configuration files" msgstr "" #: ../src/plugins/collect_vimrc_system.xml.in.h:2 msgid "Save /etc/vimrc and /etc/gvimrc" msgstr "" #: ../src/plugins/collect_vimrc_system.xml.in.h:3 msgid "" "Checks if there are vimrc and gvimrc files in /etc and saves them as " "system_vimrc and system_gvimrc, respectively." msgstr "" #: ../src/plugins/collect_vimrc_user.xml.in.h:1 msgid "Collect yours vim configuration files" msgstr "" #: ../src/plugins/collect_vimrc_user.xml.in.h:2 msgid "Save .vimrc and .gvimrc from your home directory" msgstr "" #: ../src/plugins/collect_vimrc_user.xml.in.h:3 msgid "" "Checks if there are .vimrc and .gvimrc in your home directory and saves them" " as user_vimrc and user_gvimrc, respectively." msgstr "" #: ../src/plugins/post_report.xml.in.h:1 msgid "Post report" msgstr "" #: ../src/plugins/post_report.xml.in.h:2 msgid "Executed after the reporting is finished" msgstr "" #: ../src/plugins/post_report.xml.in.h:3 msgid "Used for updating of the databases" msgstr ""