From 0b06b2af5361a7372b77d1d873d7cc4fc075f093 Mon Sep 17 00:00:00 2001
From: Pavel Raiskup <praiskup@redhat.com>
Date: Jul 06 2015 19:52:52 +0000
Subject: cleanup: remove unused patch


Version: 2.69-20

---

diff --git a/autoconf-2.68-selfcheckfailure.patch b/autoconf-2.68-selfcheckfailure.patch
deleted file mode 100644
index 189e699..0000000
--- a/autoconf-2.68-selfcheckfailure.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-diff -up autoconf-2.68/tests/autotest.at.selfcheckfailure autoconf-2.68/tests/autotest.at
---- autoconf-2.68/tests/autotest.at.selfcheckfailure	2010-12-06 15:43:33.000000000 +0100
-+++ autoconf-2.68/tests/autotest.at	2010-12-06 15:46:05.000000000 +0100
-@@ -1509,122 +1509,122 @@ AT_CHECK_AT_TEST([parallel errexit],
-   [-j2 --errexit])
- 
- 
--AT_SETUP([parallel autotest and signal handling])
--
--AT_SKIP_PARALLEL_TESTS
--
--# Goals:
--# (1) interrupt `./testsuite -jN'
--# (2) interrupt `make check TESTSUITEFLAGS=-jN'
--# (3) no trailing verbose/trace output
--# (4) exit status should be 128+signal
--
--AT_DATA([atlocal],
--[[suite_pid=$$
--export suite_pid
--]])
--
--AT_CHECK_AT_PREP([micro-suite],
--[[AT_INIT([suite to test parallel execution])
--AT_SETUP([test number 1])
--AT_CHECK([sleep 2])
--AT_CLEANUP
--AT_SETUP([test number 2])
--AT_CHECK([sleep 1])
--AT_CLEANUP
--AT_SETUP([test number 3])
--AT_CHECK([sleep 1])
--AT_CLEANUP
--AT_SETUP([killer test])
--AT_CHECK([kill -$signal $suite_pid])
--AT_CLEANUP
--m4_for([count], [5], [7], [],
--   [AT_SETUP([test number count])
--    AT_CHECK([sleep 1])
--    AT_CLEANUP
--])
--]])
--
--AT_DATA([Makefile.in],
--[[@SET_MAKE@
--SHELL = @SHELL@
--TESTSUITE = ./micro-suite
--check:
--	$(SHELL) '$(TESTSUITE)' $(TESTSUITEFLAGS)
--.PHONY: check
--]])
--
--AT_CHECK([$CONFIG_SHELL $abs_top_builddir/config.status --file=Makefile:Makefile.in],
--	 [], [ignore])
--
--# Test INT and TERM.
--for signal in 2 15; do
--  export signal
--  AS_VAR_ARITH([expected_status], [128 + $signal])
--
--  # Sequential case.
--  AT_CHECK([$CONFIG_SHELL ./micro-suite], [$expected_status],
--	   [ignore], [stderr])
--  # Both stderr and the log should contain the notification about the signal.
--  AT_CHECK([grep 'bailing out' stderr], [], [ignore])
--  AT_CHECK([grep 'bailing out' micro-suite.log], [], [ignore])
--  # There should be no junk job status output.
--  AT_CHECK([[grep '[iI]nterrupt[	 ]' stderr]], [1])
--
--  # Parallel case.
--  AT_CHECK([$CONFIG_SHELL ./micro-suite --jobs=3], [$expected_status],
--	   [ignore], [stderr])
--  AT_CHECK([grep 'bailing out' stderr], [], [ignore])
--  AT_CHECK([grep 'bailing out' micro-suite.log], [], [ignore])
--  # We'd like to check this here, too, but some shells do not allow to
--  # turn off job control.
--  # AT_CHECK([[grep '[iI]nterrupt[	 ]' stderr]], [1])
--
--  # Ditto with `make' in the loop.
--  : "${MAKE=make}"
--  unset MAKEFLAGS
--  # Need to eliminate outer TESTSUITEFLAGS here.
--  # Need to normalize exit status here: some make implementations
--  # exit 1 (BSD make), some exit 2 (GNU make).
--  AT_CHECK([$MAKE check TESTSUITEFLAGS=; ]dnl
--	   [case $? in 1|2) exit 1;; *) exit $?;; esac],
--	   [1], [ignore], [stderr])
--  AT_CHECK([grep 'bailing out' stderr], [], [ignore])
--  AT_CHECK([grep 'bailing out' micro-suite.log], [], [ignore])
--  # Ditto, parallel case.
--  AT_CHECK([$MAKE check TESTSUITEFLAGS=--jobs=3; ]dnl
--	   [case $? in 1|2) exit 1;; *) exit $?;; esac],
--	   [1], [ignore], [stderr])
--  AT_CHECK([grep 'bailing out' stderr], [], [ignore])
--  AT_CHECK([grep 'bailing out' micro-suite.log], [], [ignore])
--done
--
--
--# Test PIPE.
--# The most important part here is that things should not hang, nor
--# get out of hand.  OTOH, if the shell sets the default handler to
--# ignore PIPE (pdksh, dash), there is little we can do about having the
--# test run; it's only the output that won't be there.  So all we check
--# for is that, if test 7 didn't run serially, then it shouldn't be
--# run in the parallel case either; the intermediate tests serve as
--# parallel barrier.
--# Note that stderr may contain "Broken pipe" errors.
--AT_CHECK([($CONFIG_SHELL ./micro-suite -d -3 5-; echo $? >status) | sed 5q],
--	 [], [stdout], [stderr])
--AT_CHECK([grep '5.*ok' stdout], [1])
--# Apparently some shells don't get around to creating 'status' any more.
--# And ksh93 on FreeBSD uses 256 + 13 instead of 128 + 13
--AT_CHECK([test ! -s status || grep 141 status || grep 269 status],
--	 [], [ignore])
--AT_CHECK([if test -f micro-suite.dir/7/micro-suite.log; then ]dnl
--	 [  echo "shell ignores SIGPIPE" > sigpipe-stamp ]dnl
--	 [else :; fi])
--
--AT_CHECK([$CONFIG_SHELL ./micro-suite -d -3 5- --jobs=2 | sed 5q], [], [stdout], [ignore])
--AT_CHECK([grep '5.*ok' stdout], [1])
--AT_CHECK([test -s sigpipe-stamp || test ! -f micro-suite.dir/7/micro-suite.log], [0])
--
--AT_CLEANUP
-+# AT_SETUP([parallel autotest and signal handling])
-+# 
-+# AT_SKIP_PARALLEL_TESTS
-+# 
-+# # Goals:
-+# # (1) interrupt `./testsuite -jN'
-+# # (2) interrupt `make check TESTSUITEFLAGS=-jN'
-+# # (3) no trailing verbose/trace output
-+# # (4) exit status should be 128+signal
-+# 
-+# AT_DATA([atlocal],
-+# [[suite_pid=$$
-+# export suite_pid
-+# ]])
-+# 
-+# AT_CHECK_AT_PREP([micro-suite],
-+# [[AT_INIT([suite to test parallel execution])
-+# AT_SETUP([test number 1])
-+# AT_CHECK([sleep 2])
-+# AT_CLEANUP
-+# AT_SETUP([test number 2])
-+# AT_CHECK([sleep 1])
-+# AT_CLEANUP
-+# AT_SETUP([test number 3])
-+# AT_CHECK([sleep 1])
-+# AT_CLEANUP
-+# AT_SETUP([killer test])
-+# AT_CHECK([kill -$signal $suite_pid])
-+# AT_CLEANUP
-+# m4_for([count], [5], [7], [],
-+#    [AT_SETUP([test number count])
-+#     AT_CHECK([sleep 1])
-+#     AT_CLEANUP
-+# ])
-+# ]])
-+# 
-+# AT_DATA([Makefile.in],
-+# [[@SET_MAKE@
-+# SHELL = @SHELL@
-+# TESTSUITE = ./micro-suite
-+# check:
-+# 	$(SHELL) '$(TESTSUITE)' $(TESTSUITEFLAGS)
-+# .PHONY: check
-+# ]])
-+# 
-+# AT_CHECK([$CONFIG_SHELL $abs_top_builddir/config.status --file=Makefile:Makefile.in],
-+# 	 [], [ignore])
-+# 
-+# # Test INT and TERM.
-+# for signal in 2 15; do
-+#   export signal
-+#   AS_VAR_ARITH([expected_status], [128 + $signal])
-+# 
-+#   # Sequential case.
-+#   AT_CHECK([$CONFIG_SHELL ./micro-suite], [$expected_status],
-+# 	   [ignore], [stderr])
-+#   # Both stderr and the log should contain the notification about the signal.
-+#   AT_CHECK([grep 'bailing out' stderr], [], [ignore])
-+#   AT_CHECK([grep 'bailing out' micro-suite.log], [], [ignore])
-+#   # There should be no junk job status output.
-+#   AT_CHECK([[grep '[iI]nterrupt[	 ]' stderr]], [1])
-+# 
-+#   # Parallel case.
-+#   AT_CHECK([$CONFIG_SHELL ./micro-suite --jobs=3], [$expected_status],
-+# 	   [ignore], [stderr])
-+#   AT_CHECK([grep 'bailing out' stderr], [], [ignore])
-+#   AT_CHECK([grep 'bailing out' micro-suite.log], [], [ignore])
-+#   # We'd like to check this here, too, but some shells do not allow to
-+#   # turn off job control.
-+#   # AT_CHECK([[grep '[iI]nterrupt[	 ]' stderr]], [1])
-+# 
-+#   # Ditto with `make' in the loop.
-+#   : "${MAKE=make}"
-+#   unset MAKEFLAGS
-+#   # Need to eliminate outer TESTSUITEFLAGS here.
-+#   # Need to normalize exit status here: some make implementations
-+#   # exit 1 (BSD make), some exit 2 (GNU make).
-+#   AT_CHECK([$MAKE check TESTSUITEFLAGS=; ]dnl
-+# 	   [case $? in 1|2) exit 1;; *) exit $?;; esac],
-+# 	   [1], [ignore], [stderr])
-+#   AT_CHECK([grep 'bailing out' stderr], [], [ignore])
-+#   AT_CHECK([grep 'bailing out' micro-suite.log], [], [ignore])
-+#   # Ditto, parallel case.
-+#   AT_CHECK([$MAKE check TESTSUITEFLAGS=--jobs=3; ]dnl
-+# 	   [case $? in 1|2) exit 1;; *) exit $?;; esac],
-+# 	   [1], [ignore], [stderr])
-+#   AT_CHECK([grep 'bailing out' stderr], [], [ignore])
-+#   AT_CHECK([grep 'bailing out' micro-suite.log], [], [ignore])
-+# done
-+# 
-+# 
-+# # Test PIPE.
-+# # The most important part here is that things should not hang, nor
-+# # get out of hand.  OTOH, if the shell sets the default handler to
-+# # ignore PIPE (pdksh, dash), there is little we can do about having the
-+# # test run; it's only the output that won't be there.  So all we check
-+# # for is that, if test 7 didn't run serially, then it shouldn't be
-+# # run in the parallel case either; the intermediate tests serve as
-+# # parallel barrier.
-+# # Note that stderr may contain "Broken pipe" errors.
-+# AT_CHECK([($CONFIG_SHELL ./micro-suite -d -3 5-; echo $? >status) | sed 5q],
-+# 	 [], [stdout], [stderr])
-+# AT_CHECK([grep '5.*ok' stdout], [1])
-+# # Apparently some shells don't get around to creating 'status' any more.
-+# # And ksh93 on FreeBSD uses 256 + 13 instead of 128 + 13
-+# AT_CHECK([test ! -s status || grep 141 status || grep 269 status],
-+# 	 [], [ignore])
-+# AT_CHECK([if test -f micro-suite.dir/7/micro-suite.log; then ]dnl
-+# 	 [  echo "shell ignores SIGPIPE" > sigpipe-stamp ]dnl
-+# 	 [else :; fi])
-+# 
-+# AT_CHECK([$CONFIG_SHELL ./micro-suite -d -3 5- --jobs=2 | sed 5q], [], [stdout], [ignore])
-+# AT_CHECK([grep '5.*ok' stdout], [1])
-+# AT_CHECK([test -s sigpipe-stamp || test ! -f micro-suite.dir/7/micro-suite.log], [0])
-+# 
-+# AT_CLEANUP
- 
- 
- # Avoid running into a regression when mkfifo does not work.